[ARM] 3377/2: add support for intel xsc3 core

Patch from Lennert Buytenhek

This patch adds support for the new XScale v3 core.  This is an
ARMv5 ISA core with the following additions:

- L2 cache
- I/O coherency support (on select chipsets)
- Low-Locality Reference cache attributes (replaces mini-cache)
- Supersections (v6 compatible)
- 36-bit addressing (v6 compatible)
- Single instruction cache line clean/invalidate
- LRU cache replacement (vs round-robin)

I attempted to merge the XSC3 support into proc-xscale.S, but XSC3
cores have separate errata and have to handle things like L2, so it
is simpler to keep it separate.

L2 cache support is currently a build option because the L2 enable
bit must be set before we enable the MMU and there is no easy way to
capture command line parameters at this point.

There are still optimizations that can be done such as using LLR for
copypage (in theory using the exisiting mini-cache code) but those
can be addressed down the road.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

11 files changed, 680 insertions, 2 deletions

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 99c0d323719..0f571d3d2fa 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -57,6 +57,7 @@ tune-$(CONFIG_CPU_ARM926T)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_SA110)        :=-mtune=strongarm110
 tune-$(CONFIG_CPU_SA1100)       :=-mtune=strongarm1100
 tune-$(CONFIG_CPU_XSCALE)       :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
+tune-$(CONFIG_CPU_XSC3)         :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
 tune-$(CONFIG_CPU_V6)           :=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
 
 ifeq ($(CONFIG_AEABI),y)
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index e680c5fd93b..c55b739e10b 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -239,6 +239,17 @@ config CPU_XSCALE
         select CPU_CACHE_VIVT
         select CPU_TLB_V4WBI
 
+# XScale Core Version 3
+config CPU_XSC3
+        bool
+        depends on ARCH_IXP23XX
+        default y
+        select CPU_32v5
+        select CPU_ABRT_EV5T
+        select CPU_CACHE_VIVT
+        select CPU_TLB_V4WBI
+        select IO_36
+
 # ARMv6
 config CPU_V6
         bool "Support ARM V6 processor"
@@ -361,11 +372,17 @@ config CPU_TLB_V4WBI
 config CPU_TLB_V6
         bool
 
+#
+# CPU supports 36-bit I/O
+#
+config IO_36
+        bool
+
 comment "Processor Features"
 
 config ARM_THUMB
         bool "Support Thumb user binaries"
-        depends on CPU_ARM720T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_V6
+        depends on CPU_ARM720T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6
         default y
         help
           Say Y if you want to include kernel support for running user space
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index ffe73ba2bf1..07a53850578 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_CPU_COPY_V4WB)	+= copypage-v4wb.o
 obj-$(CONFIG_CPU_COPY_V6)       += copypage-v6.o mmu.o
 obj-$(CONFIG_CPU_SA1100)        += copypage-v4mc.o
 obj-$(CONFIG_CPU_XSCALE)        += copypage-xscale.o
+obj-$(CONFIG_CPU_XSC3)          += copypage-xsc3.o
 
 obj-$(CONFIG_CPU_TLB_V3)        += tlb-v3.o
 obj-$(CONFIG_CPU_TLB_V4WT)      += tlb-v4.o
@@ -51,4 +52,5 @@ obj-$(CONFIG_CPU_ARM1026)	+= proc-arm1026.o
 obj-$(CONFIG_CPU_SA110)         += proc-sa110.o
 obj-$(CONFIG_CPU_SA1100)        += proc-sa1100.o
 obj-$(CONFIG_CPU_XSCALE)        += proc-xscale.o
+obj-$(CONFIG_CPU_XSC3)          += proc-xsc3.o
 obj-$(CONFIG_CPU_V6)            += proc-v6.o
diff --git a/arch/arm/mm/copypage-xsc3.S b/arch/arm/mm/copypage-xsc3.S
new file mode 100644
index 00000000000..9a2cb4332b4
--- /dev/null
+++ b/arch/arm/mm/copypage-xsc3.S
@@ -0,0 +1,97 @@
+/*
+ *  linux/arch/arm/lib/copypage-xsc3.S
+ *
+ *  Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Adapted for 3rd gen XScale core, no more mini-dcache
+ * Author: Matt Gilbert (matthew.m.gilbert@intel.com)
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/asm-offsets.h>
+
+/*
+ * General note:
+ *  We don't really want write-allocate cache behaviour for these functions
+ *  since that will just eat through 8K of the cache.
+ */
+
+        .text
+        .align  5
+/*
+ * XSC3 optimised copy_user_page
+ *  r0 = destination
+ *  r1 = source
+ *  r2 = virtual user address of ultimate destination page
+ *
+ * The source page may have some clean entries in the cache already, but we
+ * can safely ignore them - break_cow() will flush them out of the cache
+ * if we eventually end up using our copied page.
+ *
+ */
+ENTRY(xsc3_mc_copy_user_page)
+        stmfd   sp!, {r4, r5, lr}
+        mov     lr, #PAGE_SZ/64-1
+
+        pld     [r1, #0]
+        pld     [r1, #32]
+1:      pld     [r1, #64]
+        pld     [r1, #96]
+
+2:      ldrd    r2, [r1], #8
+        mov     ip, r0
+        ldrd    r4, [r1], #8
+        mcr     p15, 0, ip, c7, c6, 1           @ invalidate
+        strd    r2, [r0], #8
+        ldrd    r2, [r1], #8
+        strd    r4, [r0], #8
+        ldrd    r4, [r1], #8
+        strd    r2, [r0], #8
+        strd    r4, [r0], #8
+        ldrd    r2, [r1], #8
+        mov     ip, r0
+        ldrd    r4, [r1], #8
+        mcr     p15, 0, ip, c7, c6, 1           @ invalidate
+        strd    r2, [r0], #8
+        ldrd    r2, [r1], #8
+        subs    lr, lr, #1
+        strd    r4, [r0], #8
+        ldrd    r4, [r1], #8
+        strd    r2, [r0], #8
+        strd    r4, [r0], #8
+        bgt     1b
+        beq     2b
+
+        ldmfd   sp!, {r4, r5, pc}
+
+        .align  5
+/*
+ * XScale optimised clear_user_page
+ *  r0 = destination
+ *  r1 = virtual user address of ultimate destination page
+ */
+ENTRY(xsc3_mc_clear_user_page)
+        mov     r1, #PAGE_SZ/32
+        mov     r2, #0
+        mov     r3, #0
+1:      mcr     p15, 0, r0, c7, c6, 1           @ invalidate line
+        strd    r2, [r0], #8
+        strd    r2, [r0], #8
+        strd    r2, [r0], #8
+        strd    r2, [r0], #8
+        subs    r1, r1, #1
+        bne     1b
+        mov     pc, lr
+
+        __INITDATA
+
+        .type   xsc3_mc_user_fns, #object
+ENTRY(xsc3_mc_user_fns)
+        .long   xsc3_mc_clear_user_page
+        .long   xsc3_mc_copy_user_page
+        .size   xsc3_mc_user_fns, . - xsc3_mc_user_fns
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
index ef8d30a185a..5e5d05bcad5 100644
--- a/arch/arm/mm/mm-armv.c
+++ b/arch/arm/mm/mm-armv.c
@@ -557,7 +557,8 @@ void __init create_mapping(struct map_desc *md)
          *      supersections are only allocated for domain 0 regardless
          *      of the actual domain assignments in use.
          */
-        if (cpu_architecture() >= CPU_ARCH_ARMv6 && domain == 0) {
+        if ((cpu_architecture() >= CPU_ARCH_ARMv6 || cpu_is_xsc3())
+                && domain == 0) {
                 /*
                  * Align to supersection boundary if !high pages.
                  * High pages have already been checked for proper
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
new file mode 100644
index 00000000000..f90513e9af0
--- /dev/null
+++ b/arch/arm/mm/proc-xsc3.S
@@ -0,0 +1,498 @@
+/*
+ * linux/arch/arm/mm/proc-xsc3.S
+ *
+ * Original Author: Matthew Gilbert
+ * Current Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (C) Intel Corp.
+ * Copyright 2005 (c) MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * MMU functions for the Intel XScale3 Core (XSC3).  The XSC3 core is an
+ * extension to Intel's original XScale core that adds the following
+ * features:
+ *
+ * - ARMv6 Supersections
+ * - Low Locality Reference pages (replaces mini-cache)
+ * - 36-bit addressing
+ * - L2 cache
+ * - Cache-coherency if chipset supports it
+ *
+ * Based on orignal XScale code by Nicolas Pitre
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/procinfo.h>
+#include <asm/hardware.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include "proc-macros.S"
+
+/*
+ * This is the maximum size of an area which will be flushed.  If the
+ * area is larger than this, then we flush the whole cache.
+ */
+#define MAX_AREA_SIZE   32768
+
+/*
+ * The cache line size of the I and D cache.
+ */
+#define CACHELINESIZE   32
+
+/*
+ * The size of the data cache.
+ */
+#define CACHESIZE       32768
+
+/*
+ * Run with L2 enabled.
+ */
+#define L2_CACHE_ENABLE 1
+
+/*
+ * Enable the Branch Target Buffer (can cause crashes, see erratum #42.)
+ */
+#define BTB_ENABLE      0
+
+/*
+ * This macro is used to wait for a CP15 write and is needed
+ * when we have to ensure that the last operation to the co-pro
+ * was completed before continuing with operation.
+ */
+        .macro  cpwait_ret, lr, rd
+        mrc     p15, 0, \rd, c2, c0, 0          @ arbitrary read of cp15
+        sub     pc, \lr, \rd, LSR #32           @ wait for completion and
+                                                @ flush instruction pipeline
+        .endm
+
+/*
+ * This macro cleans & invalidates the entire xsc3 dcache by set & way.
+ */
+
+        .macro  clean_d_cache rd, rs
+        mov     \rd, #0x1f00
+        orr     \rd, \rd, #0x00e0
+1:      mcr     p15, 0, \rd, c7, c14, 2         @ clean/inv set/way
+        adds    \rd, \rd, #0x40000000
+        bcc     1b
+        subs    \rd, \rd, #0x20
+        bpl     1b
+        .endm
+
+        .text
+
+/*
+ * cpu_xsc3_proc_init()
+ *
+ * Nothing too exciting at the moment
+ */
+ENTRY(cpu_xsc3_proc_init)
+        mov     pc, lr
+
+/*
+ * cpu_xsc3_proc_fin()
+ */
+ENTRY(cpu_xsc3_proc_fin)
+        str     lr, [sp, #-4]!
+        mov     r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
+        msr     cpsr_c, r0
+        bl      xsc3_flush_kern_cache_all       @ clean caches
+        mrc     p15, 0, r0, c1, c0, 0           @ ctrl register
+        bic     r0, r0, #0x1800                 @ ...IZ...........
+        bic     r0, r0, #0x0006                 @ .............CA.
+        mcr     p15, 0, r0, c1, c0, 0           @ disable caches
+        ldr     pc, [sp], #4
+
+/*
+ * cpu_xsc3_reset(loc)
+ *
+ * Perform a soft reset of the system.  Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ */
+        .align  5
+ENTRY(cpu_xsc3_reset)
+        mov     r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
+        msr     cpsr_c, r1                      @ reset CPSR
+        mrc     p15, 0, r1, c1, c0, 0           @ ctrl register
+        bic     r1, r1, #0x0086                 @ ........B....CA.
+        bic     r1, r1, #0x3900                 @ ..VIZ..S........
+        mcr     p15, 0, r1, c1, c0, 0           @ ctrl register
+        mcr     p15, 0, ip, c7, c7, 0           @ invalidate I,D caches & BTB
+        bic     r1, r1, #0x0001                 @ ...............M
+        mcr     p15, 0, r1, c1, c0, 0           @ ctrl register
+        @ CAUTION: MMU turned off from this point.  We count on the pipeline
+        @ already containing those two last instructions to survive.
+        mcr     p15, 0, ip, c8, c7, 0           @ invalidate I & D TLBs
+        mov     pc, r0
+
+/*
+ * cpu_xsc3_do_idle()
+ *
+ * Cause the processor to idle
+ *
+ * For now we do nothing but go to idle mode for every case
+ *
+ * XScale supports clock switching, but using idle mode support
+ * allows external hardware to react to system state changes.
+
+ MMG: Come back to this one.
+ */
+        .align  5
+
+ENTRY(cpu_xsc3_do_idle)
+        mov     r0, #1
+        mcr     p14, 0, r0, c7, c0, 0           @ Go to IDLE
+        mov     pc, lr
+
+/* ================================= CACHE ================================ */
+
+/*
+ *      flush_user_cache_all()
+ *
+ *      Invalidate all cache entries in a particular address
+ *      space.
+ */
+ENTRY(xsc3_flush_user_cache_all)
+        /* FALLTHROUGH */
+
+/*
+ *      flush_kern_cache_all()
+ *
+ *      Clean and invalidate the entire cache.
+ */
+ENTRY(xsc3_flush_kern_cache_all)
+        mov     r2, #VM_EXEC
+        mov     ip, #0
+__flush_whole_cache:
+        clean_d_cache r0, r1
+        tst     r2, #VM_EXEC
+        mcrne   p15, 0, ip, c7, c5, 0           @ Invalidate I cache & BTB
+        mcrne   p15, 0, ip, c7, c10, 4          @ Drain Write Buffer
+        mcrne   p15, 0, ip, c7, c5, 4           @ Prefetch Flush
+        mov     pc, lr
+
+/*
+ *      flush_user_cache_range(start, end, vm_flags)
+ *
+ *      Invalidate a range of cache entries in the specified
+ *      address space.
+ *
+ *      - start - start address (may not be aligned)
+ *      - end   - end address (exclusive, may not be aligned)
+ *      - vma   - vma_area_struct describing address space
+ */
+        .align  5
+ENTRY(xsc3_flush_user_cache_range)
+        mov     ip, #0
+        sub     r3, r1, r0                      @ calculate total size
+        cmp     r3, #MAX_AREA_SIZE
+        bhs     __flush_whole_cache
+
+1:      tst     r2, #VM_EXEC
+        mcrne   p15, 0, r0, c7, c5, 1           @ Invalidate I cache line
+        mcr     p15, 0, r0, c7, c14, 1          @ Clean/invalidate D cache line
+        add     r0, r0, #CACHELINESIZE
+        cmp     r0, r1
+        blo     1b
+        tst     r2, #VM_EXEC
+        mcrne   p15, 0, ip, c7, c5, 6           @ Invalidate BTB
+        mcrne   p15, 0, ip, c7, c10, 4          @ Drain Write Buffer
+        mcrne   p15, 0, ip, c7, c5, 4           @ Prefetch Flush
+        mov     pc, lr
+
+/*
+ *      coherent_kern_range(start, end)
+ *
+ *      Ensure coherency between the Icache and the Dcache in the
+ *      region described by start.  If you have non-snooping
+ *      Harvard caches, you need to implement this function.
+ *
+ *      - start  - virtual start address
+ *      - end    - virtual end address
+ *
+ *      Note: single I-cache line invalidation isn't used here since
+ *      it also trashes the mini I-cache used by JTAG debuggers.
+ */
+ENTRY(xsc3_coherent_kern_range)
+/* FALLTHROUGH */
+ENTRY(xsc3_coherent_user_range)
+        bic     r0, r0, #CACHELINESIZE - 1
+1:      mcr     p15, 0, r0, c7, c10, 1          @ clean D entry
+        add     r0, r0, #CACHELINESIZE
+        cmp     r0, r1
+        blo     1b
+        mov     r0, #0
+        mcr     p15, 0, r0, c7, c5, 0           @ Invalidate I cache & BTB
+        mcr     p15, 0, r0, c7, c10, 4          @ Drain Write Buffer
+        mcr     p15, 0, r0, c7, c5, 4           @ Prefetch Flush
+        mov     pc, lr
+
+/*
+ *      flush_kern_dcache_page(void *page)
+ *
+ *      Ensure no D cache aliasing occurs, either with itself or
+ *      the I cache
+ *
+ *      - addr  - page aligned address
+ */
+ENTRY(xsc3_flush_kern_dcache_page)
+        add     r1, r0, #PAGE_SZ
+1:      mcr     p15, 0, r0, c7, c14, 1          @ Clean/Invalidate D Cache line
+        add     r0, r0, #CACHELINESIZE
+        cmp     r0, r1
+        blo     1b
+        mov     r0, #0
+        mcr     p15, 0, r0, c7, c5, 0           @ Invalidate I cache & BTB
+        mcr     p15, 0, r0, c7, c10, 4          @ Drain Write Buffer
+        mcr     p15, 0, r0, c7, c5, 4           @ Prefetch Flush
+        mov     pc, lr
+
+/*
+ *      dma_inv_range(start, end)
+ *
+ *      Invalidate (discard) the specified virtual address range.
+ *      May not write back any entries.  If 'start' or 'end'
+ *      are not cache line aligned, those lines must be written
+ *      back.
+ *
+ *      - start  - virtual start address
+ *      - end    - virtual end address
+ */
+ENTRY(xsc3_dma_inv_range)
+        tst     r0, #CACHELINESIZE - 1
+        bic     r0, r0, #CACHELINESIZE - 1
+        mcrne   p15, 0, r0, c7, c10, 1          @ clean L1 D entry
+        mcrne   p15, 1, r0, c7, c11, 1          @ clean L2 D entry
+        tst     r1, #CACHELINESIZE - 1
+        mcrne   p15, 0, r1, c7, c10, 1          @ clean L1 D entry
+        mcrne   p15, 1, r1, c7, c11, 1          @ clean L2 D entry
+1:      mcr     p15, 0, r0, c7, c6, 1           @ invalidate L1 D entry
+        mcr     p15, 1, r0, c7, c7, 1           @ Invalidate L2 D cache line
+        add     r0, r0, #CACHELINESIZE
+        cmp     r0, r1
+        blo     1b
+        mcr     p15, 0, r0, c7, c10, 4          @ Drain Write Buffer
+        mov     pc, lr
+
+/*
+ *      dma_clean_range(start, end)
+ *
+ *      Clean the specified virtual address range.
+ *
+ *      - start  - virtual start address
+ *      - end    - virtual end address
+ */
+ENTRY(xsc3_dma_clean_range)
+        bic     r0, r0, #CACHELINESIZE - 1
+1:      mcr     p15, 0, r0, c7, c10, 1          @ clean L1 D entry
+        mcr     p15, 1, r0, c7, c11, 1          @ clean L2 D entry
+        add     r0, r0, #CACHELINESIZE
+        cmp     r0, r1
+        blo     1b
+        mcr     p15, 0, r0, c7, c10, 4          @ Drain Write Buffer
+        mov     pc, lr
+
+/*
+ *      dma_flush_range(start, end)
+ *
+ *      Clean and invalidate the specified virtual address range.
+ *
+ *      - start  - virtual start address
+ *      - end    - virtual end address
+ */
+ENTRY(xsc3_dma_flush_range)
+        bic     r0, r0, #CACHELINESIZE - 1
+1:      mcr     p15, 0, r0, c7, c14, 1  @ Clean/invalidate L1 D cache line
+        mcr     p15, 1, r0, c7, c11, 1  @ Clean L2 D cache line
+        mcr     p15, 1, r0, c7, c7, 1   @ Invalidate L2 D cache line
+        add     r0, r0, #CACHELINESIZE
+        cmp     r0, r1
+        blo     1b
+        mcr     p15, 0, r0, c7, c10, 4          @ Drain Write Buffer
+        mov     pc, lr
+
+ENTRY(xsc3_cache_fns)
+        .long   xsc3_flush_kern_cache_all
+        .long   xsc3_flush_user_cache_all
+        .long   xsc3_flush_user_cache_range
+        .long   xsc3_coherent_kern_range
+        .long   xsc3_coherent_user_range
+        .long   xsc3_flush_kern_dcache_page
+        .long   xsc3_dma_inv_range
+        .long   xsc3_dma_clean_range
+        .long   xsc3_dma_flush_range
+
+ENTRY(cpu_xsc3_dcache_clean_area)
+1:      mcr     p15, 0, r0, c7, c10, 1          @ clean D entry
+        add     r0, r0, #CACHELINESIZE
+        subs    r1, r1, #CACHELINESIZE
+        bhi     1b
+        mov     pc, lr
+
+/* =============================== PageTable ============================== */
+
+/*
+ * cpu_xsc3_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+        .align  5
+ENTRY(cpu_xsc3_switch_mm)
+        clean_d_cache r1, r2
+        mcr     p15, 0, ip, c7, c5, 0           @ Invalidate I cache & BTB
+        mcr     p15, 0, ip, c7, c10, 4          @ Drain Write Buffer
+        mcr     p15, 0, ip, c7, c5, 4           @ Prefetch Flush
+#ifdef L2_CACHE_ENABLE
+        orr     r0, r0, #0x18                   @ cache the page table in L2
+#endif
+        mcr     p15, 0, r0, c2, c0, 0           @ load page table pointer
+        mcr     p15, 0, ip, c8, c7, 0           @ invalidate I & D TLBs
+        cpwait_ret lr, ip
+
+/*
+ * cpu_xsc3_set_pte(ptep, pte)
+ *
+ * Set a PTE and flush it out
+ *
+ */
+        .align  5
+ENTRY(cpu_xsc3_set_pte)
+        str     r1, [r0], #-2048                @ linux version
+
+        bic     r2, r1, #0xff0
+        orr     r2, r2, #PTE_TYPE_EXT           @ extended page
+
+        eor     r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+
+        tst     r3, #L_PTE_USER                 @ User?
+        orrne   r2, r2, #PTE_EXT_AP_URO_SRW     @ yes -> user r/o, system r/w
+
+        tst     r3, #L_PTE_WRITE | L_PTE_DIRTY  @ Write and Dirty?
+        orreq   r2, r2, #PTE_EXT_AP_UNO_SRW     @ yes -> user n/a, system r/w
+                                                @ combined with user -> user r/w
+
+#if L2_CACHE_ENABLE
+        @ If its cacheable it needs to be in L2 also.
+        eor     ip, r1, #L_PTE_CACHEABLE
+        tst     ip, #L_PTE_CACHEABLE
+        orreq   r2, r2, #PTE_EXT_TEX(0x5)
+#endif
+
+        tst     r3, #L_PTE_PRESENT | L_PTE_YOUNG        @ Present and Young?
+        movne   r2, #0                          @ no -> fault
+
+        str     r2, [r0]                        @ hardware version
+        mov     ip, #0
+        mcr     p15, 0, r0, c7, c10, 1          @ Clean D cache line mcr
+        mcr     p15, 0, ip, c7, c10, 4          @ Drain Write Buffer
+        mov     pc, lr
+
+        .ltorg
+
+        .align
+
+        __INIT
+
+        .type   __xsc3_setup, #function
+__xsc3_setup:
+        mov     r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
+        msr     cpsr_c, r0
+        mcr     p15, 0, ip, c7, c7, 0           @ invalidate I, D caches & BTB
+        mcr     p15, 0, ip, c7, c10, 4          @ Drain Write Buffer
+        mcr     p15, 0, ip, c7, c5, 4           @ Prefetch Flush
+        mcr     p15, 0, ip, c8, c7, 0           @ invalidate I, D TLBs
+#if L2_CACHE_ENABLE
+        orr     r4, r4, #0x18                   @ cache the page table in L2
+#endif
+        mcr     p15, 0, r4, c2, c0, 0           @ load page table pointer
+        mov     r0, #1                          @ Allow access to CP0 and CP13
+        orr     r0, r0, #1 << 13                @ Its undefined whether this
+        mcr     p15, 0, r0, c15, c1, 0          @ affects USR or SVC modes
+        mrc     p15, 0, r0, c1, c0, 1           @ get auxiliary control reg
+        and     r0, r0, #2                      @ preserve bit P bit setting
+#if L2_CACHE_ENABLE
+        orr     r0, r0, #(1 << 10)              @ enable L2 for LLR cache
+#endif
+        mcr     p15, 0, r0, c1, c0, 1           @ set auxiliary control reg
+        mrc     p15, 0, r0, c1, c0, 0           @ get control register
+        bic     r0, r0, #0x0200                 @ .... ..R. .... ....
+        bic     r0, r0, #0x0002                 @ .... .... .... ..A.
+        orr     r0, r0, #0x0005                 @ .... .... .... .C.M
+#if BTB_ENABLE
+        orr     r0, r0, #0x3900                 @ ..VI Z..S .... ....
+#else
+        orr     r0, r0, #0x3100                 @ ..VI ...S .... ....
+#endif
+#if L2_CACHE_ENABLE
+        orr     r0, r0, #0x4000000              @ L2 enable
+#endif
+        mov     pc, lr
+
+        .size   __xsc3_setup, . - __xsc3_setup
+
+        __INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ *           come through these
+ */
+
+        .type   xsc3_processor_functions, #object
+ENTRY(xsc3_processor_functions)
+        .word   v5t_early_abort
+        .word   cpu_xsc3_proc_init
+        .word   cpu_xsc3_proc_fin
+        .word   cpu_xsc3_reset
+        .word   cpu_xsc3_do_idle
+        .word   cpu_xsc3_dcache_clean_area
+        .word   cpu_xsc3_switch_mm
+        .word   cpu_xsc3_set_pte
+        .size   xsc3_processor_functions, . - xsc3_processor_functions
+
+        .section ".rodata"
+
+        .type   cpu_arch_name, #object
+cpu_arch_name:
+        .asciz  "armv5te"
+        .size   cpu_arch_name, . - cpu_arch_name
+
+        .type   cpu_elf_name, #object
+cpu_elf_name:
+        .asciz  "v5"
+        .size   cpu_elf_name, . - cpu_elf_name
+
+        .type   cpu_xsc3_name, #object
+cpu_xsc3_name:
+        .asciz  "XScale-Core3"
+        .size   cpu_xsc3_name, . - cpu_xsc3_name
+
+        .align
+
+        .section ".proc.info.init", #alloc, #execinstr
+
+        .type   __xsc3_proc_info,#object
+__xsc3_proc_info:
+        .long   0x69056000
+        .long   0xffffe000
+        .long   0x00000c0e
+        b       __xsc3_setup
+        .long   cpu_arch_name
+        .long   cpu_elf_name
+        .long   HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+        .long   cpu_xsc3_name
+        .long   xsc3_processor_functions
+        .long   v4wbi_tlb_fns
+        .long   xsc3_mc_user_fns
+        .long   xsc3_cache_fns
+        .size   __xsc3_proc_info, . - __xsc3_proc_info
diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h
index 09e19a783a5..746be56b1b7 100644
--- a/include/asm-arm/cacheflush.h
+++ b/include/asm-arm/cacheflush.h
@@ -71,6 +71,14 @@
 # endif
 #endif
 
+#if defined(CONFIG_CPU_XSC3)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE xsc3
+# endif
+#endif
+
 #if defined(CONFIG_CPU_V6)
 //# ifdef _CACHE
 #  define MULTI_CACHE 1
diff --git a/include/asm-arm/domain.h b/include/asm-arm/domain.h
index da1d960387d..f8ea2de4848 100644
--- a/include/asm-arm/domain.h
+++ b/include/asm-arm/domain.h
@@ -16,11 +16,29 @@
  *  DOMAIN_IO     - domain 2 includes all IO only
  *  DOMAIN_USER   - domain 1 includes all user memory only
  *  DOMAIN_KERNEL - domain 0 includes all kernel memory only
+ *
+ * The domain numbering depends on whether we support 36 physical
+ * address for I/O or not.  Addresses above the 32 bit boundary can
+ * only be mapped using supersections and supersections can only
+ * be set for domain 0.  We could just default to DOMAIN_IO as zero,
+ * but there may be systems with supersection support and no 36-bit
+ * addressing.  In such cases, we want to map system memory with
+ * supersections to reduce TLB misses and footprint.
+ *
+ * 36-bit addressing and supersections are only available on
+ * CPUs based on ARMv6+ or the Intel XSC3 core.
  */
+#ifndef CONFIG_IO_36
 #define DOMAIN_KERNEL   0
 #define DOMAIN_TABLE    0
 #define DOMAIN_USER     1
 #define DOMAIN_IO       2
+#else
+#define DOMAIN_KERNEL   2
+#define DOMAIN_TABLE    2
+#define DOMAIN_USER     1
+#define DOMAIN_IO       0
+#endif
 
 /*
  * Domain types
diff --git a/include/asm-arm/page.h b/include/asm-arm/page.h
index 416320d9541..a404d2bf0c6 100644
--- a/include/asm-arm/page.h
+++ b/include/asm-arm/page.h
@@ -40,6 +40,7 @@
  *        v4wb          - ARMv4 with writeback cache, without minicache
  *        v4_mc         - ARMv4 with minicache
  *        xscale        - Xscale
+ *        xsc3          - XScalev3
  */
 #undef _USER
 #undef MULTI_USER
@@ -84,6 +85,14 @@
 # endif
 #endif
 
+#ifdef CONFIG_CPU_XSC3
+# ifdef _USER
+#  define MULTI_USER 1
+# else
+#  define _USER xsc3_mc
+# endif
+#endif
+
 #ifdef CONFIG_CPU_COPY_V6
 # define MULTI_USER 1
 #endif
diff --git a/include/asm-arm/proc-fns.h b/include/asm-arm/proc-fns.h
index 7bef2bf6be5..106045edb86 100644
--- a/include/asm-arm/proc-fns.h
+++ b/include/asm-arm/proc-fns.h
@@ -138,6 +138,14 @@
 #   define CPU_NAME cpu_xscale
 #  endif
 # endif
+# ifdef CONFIG_CPU_XSC3
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_xsc3
+#  endif
+# endif
 # ifdef CONFIG_CPU_V6
 #  ifdef CPU_NAME
 #   undef  MULTI_CPU
diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h
index ec91d1ff032..95b3abf4851 100644
--- a/include/asm-arm/system.h
+++ b/include/asm-arm/system.h
@@ -108,6 +108,25 @@ extern void __show_regs(struct pt_regs *);
 extern int cpu_architecture(void);
 extern void cpu_init(void);
 
+/*
+ * Intel's XScale3 core supports some v6 features (supersections, L2)
+ * but advertises itself as v5 as it does not support the v6 ISA.  For
+ * this reason, we need a way to explicitly test for this type of CPU.
+ */
+#ifndef CONFIG_CPU_XSC3
+#define cpu_is_xsc3()   0
+#else
+static inline int cpu_is_xsc3(void)
+{
+        extern unsigned int processor_id;
+
+        if ((processor_id & 0xffffe000) == 0x69056000)
+                return 1;
+
+        return 0;
+}
+#endif
+
 #define set_cr(x)                                       \
         __asm__ __volatile__(                           \
         "mcr    p15, 0, %0, c1, c0, 0   @ set CR"       \