commit 31bde1ceaa873bcaecd49e829bfabceacc4c512d upstream.

A "usb0" interface that has never been connected to a host has an unknown
operstate, and therefore the IFF_RUNNING flag is (incorrectly) asserted
when queried by ifconfig, ifplugd, etc.  This is a result of calling
netif_carrier_off() too early in the probe function; it should be called
after register_netdev().

Similar problems have been fixed in many other drivers, e.g.:

    e826eafa6 (bonding: Call netif_carrier_off after register_netdevice)
    0d672e9f8 (drivers/net: Call netif_carrier_off at the end of the probe)
    6a3c869a6 (cxgb4: fix reported state of interfaces without link)

Fix is to move netif_carrier_off() to the end of the function.

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4d0947dec4db1224354e2f6f00ae22ce38e62a43 upstream.

dTD's next dtd pointer need to be updated once CPU writes it, or this
request may not be handled by controller, then host will get NAK from
device forever.

This problem occurs when there is a request is handling, we need to add
a new request to dTD list, if this new request is added before the current
one is finished, the new request is intended to added as next dtd pointer
at current dTD, but without wmb(), the dTD's next dtd pointer may not be
updated when the controller reads it. In that case, the controller will
still get Terminate Bit is 1 at dTD's next dtd pointer, that means there is
no next request, then this new request is missed by controller.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Acked-by: Li Yang <leoli@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6f6543f53f9ce136e01d7114bf6f0818ca54fb41 upstream.

The field is used to pass the UVC request data length, but can also be
used to signal an error when setting it to a negative value. Switch from
unsigned int to __s32.

Reported-by: Fernandez Gonzalo <gfernandez@copreci.es>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c85dcdac5852295cf6822f5c4331a6ddab72581f upstream.

This patch (as1539) fixes a minor bug in the mass-storage gadget
drivers.  When an unknown command is received, the error code sent
back is "Invalid Field in CDB" rather than "Invalid Command".  This is
because the bitmask of CDB bytes allowed to be nonzero is incorrect.

When handling an unknown command, we don't care which command bytes
are nonzero.  All the bits in the mask should be set, not just eight
of them.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 92b0abf80c5c5f0e0d71d1309688a330fd74731b upstream.

usb: gadget: eliminate NULL pointer dereference (bugfix)

This patch fixes a bug which causes NULL pointer dereference in
ffs_ep0_ioctl. The bug happens when the FunctionFS is not bound (either
has not been bound yet or has been bound and then unbound) and can be
reproduced with running the following commands:

$ insmod g_ffs.ko
$ mount -t functionfs func /dev/usbgadget
$ ./null

where null.c is:

#include <fcntl.h>
#include <linux/usb/functionfs.h>

int main(void)
{
	int fd = open("/dev/usbgadget/ep0", O_RDWR);
	ioctl(fd, FUNCTIONFS_CLEAR_HALT);

	return 0;
}

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 731ad81e2dd97e3f222361f7b3ff4b35639e46af upstream.

ML7831 is companion chip for Intel Atom E6xx series.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com>
Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 833310402c54ad9b676b465fc53ad276b13d36be upstream.

ISSUE:
USB Suspend interrupts occur frequently.

CAUSE:
When it is called pch_udc_reconnect() in USB Suspend, it repeats reset and
Suspend.

SOLUTION:
pch_udc_reconnect() does not enable all interrupts.  When an enumeration event
occurred the driver enables all interrupts.

Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1c575d2d2e3ff2a7cb3c2e2165064199cfd8ad32 upstream.

ISSUE:
After a USB cable is connect/disconnected, the system rarely freezes.

CAUSE:
Since the USB device controller cannot know to disconnect the USB cable, when
it is used without detecting VBUS by GPIO, the UDC driver does not notify to
USB Gadget.

Since USB Gadget cannot know to disconnect, a false setting occurred when the
USB cable is connected/disconnect repeatedly.

Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 84566abba058b2aae8d603dfa90b5a3778a6714f upstream.

ISSUE:
After USB Suspend, a system rarely freezes.

CAUSE:
When USB Suspend occurred, the driver is not notifying
a gadget of the event.

Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>