From 2a8f82c4ceaffcfd64531dbdee1d1bc227387882 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Wed, 9 Dec 2009 15:59:13 -0800 Subject: USB: xhci: Notify the xHC when a device is reset. When a USB device is reset, the xHCI hardware must know, in order to match the device state and disable all endpoints except control endpoint 0. Issue a Reset Device command after a USB device is successfully reset. Wait on the command to finish, and then cache or free the disabled endpoint rings. There are four different USB device states that the xHCI hardware tracks: - disabled/enabled - device connection has just been detected, - default - the device has been reset and has an address of 0, - addressed - the device has a non-zero address but no configuration has been set, - configured - a set configuration succeeded. The USB core may issue a port reset when a device is in any state, but the Reset Device command will fail for a 0.96 xHC if the device is not in the addressed or configured state. Don't consider this failure as an error, but don't free any endpoint rings if this command fails. A storage driver may request that the USB device be reset during error handling, so use GPF_NOIO instead of GPF_KERNEL while allocating memory for the Reset Device command. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-dbg.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'drivers/usb/host/xhci-dbg.c') diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index 33128d52f212..b2915aea47ee 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -406,6 +406,25 @@ static void dbg_rsvd64(struct xhci_hcd *xhci, u64 *ctx, dma_addr_t dma) } } +inline char *xhci_get_slot_state(struct xhci_hcd *xhci, + struct xhci_container_ctx *ctx) +{ + struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx); + + switch (GET_SLOT_STATE(slot_ctx->dev_state)) { + case 0: + return "enabled/disabled"; + case 1: + return "default"; + case 2: + return "addressed"; + case 3: + return "configured"; + default: + return "reserved"; + } +} + void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx) { /* Fields are 32 bits wide, DMA addresses are in bytes */ -- cgit v1.2.2