From 354d6b2196c8e53e55e8f169804256ab9c72731d Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Sat, 23 Apr 2005 02:47:27 -0400 Subject: [SCSI] remove some dead code in qla2xxx Original from: Christoph Hellwig Modified and Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_dbg.c | 3 +- drivers/scsi/qla2xxx/qla_def.h | 60 ------------------------------- drivers/scsi/qla2xxx/qla_gbl.h | 14 -------- drivers/scsi/qla2xxx/qla_init.c | 33 +---------------- drivers/scsi/qla2xxx/qla_iocb.c | 3 -- drivers/scsi/qla2xxx/qla_isr.c | 18 +--------- drivers/scsi/qla2xxx/qla_mbx.c | 6 +--- drivers/scsi/qla2xxx/qla_os.c | 79 +++++------------------------------------ 8 files changed, 12 insertions(+), 204 deletions(-) (limited to 'drivers/scsi/qla2xxx') diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index c4cd4ac414c4..329d1a1fa547 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -1063,8 +1063,7 @@ qla2x00_print_scsi_cmd(struct scsi_cmnd * cmd) return; printk(" sp flags=0x%x\n", sp->flags); - printk(" r_start=0x%lx, u_start=0x%lx, f_start=0x%lx, state=%d\n", - sp->r_start, sp->u_start, sp->f_start, sp->state); + printk(" state=%d\n", sp->state); } #if defined(QL_DEBUG_ROUTINES) diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 7d47b8d92047..83a32e403e29 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -252,31 +252,12 @@ typedef struct srb { /* Request state */ uint16_t state; - /* Timing counts. */ - unsigned long e_start; /* Start of extend timeout */ - unsigned long r_start; /* Start of request */ - unsigned long u_start; /* When sent to RISC */ - unsigned long f_start; /* When placed in FO queue*/ - /* Single transfer DMA context */ dma_addr_t dma_handle; uint32_t request_sense_length; uint8_t *request_sense_ptr; - int ext_history; - - /* Suspend delay */ - int delay; - - /* Raw completion info for use by failover ? */ - uint8_t fo_retry_cnt; /* Retry count this request */ - uint8_t err_id; /* error id */ -#define SRB_ERR_PORT 1 /* Request failed -- "port down" */ -#define SRB_ERR_LOOP 2 /* Request failed -- "loop down" */ -#define SRB_ERR_DEVICE 3 /* Request failed -- "device error" */ -#define SRB_ERR_OTHER 4 - /* SRB magic number */ uint16_t magic; #define SRB_MAGIC 0x10CB @@ -2082,23 +2063,8 @@ typedef struct scsi_qla_host { uint32_t current_outstanding_cmd; srb_t *status_srb; /* Status continuation entry. */ - unsigned long last_irq_cpu; /* cpu where we got our last irq */ - uint16_t revision; uint8_t ports; - u_long actthreads; - u_long ipreq_cnt; - u_long qthreads; - - uint32_t total_isr_cnt; /* Interrupt count */ - uint32_t total_isp_aborts; /* controller err cnt */ - uint32_t total_lip_cnt; /* LIP cnt */ - uint32_t total_dev_errs; /* device error cnt */ - uint32_t total_ios; /* IO cnt */ - uint64_t total_bytes; /* xfr byte cnt */ - uint32_t total_mbx_timeout; /* mailbox timeout cnt */ - uint32_t total_loop_resync; /* loop resyn cnt */ - uint32_t dropped_frame_error_cnt; /* ISP configuration data. */ uint16_t loop_id; /* Host adapter loop id */ @@ -2124,8 +2090,6 @@ typedef struct scsi_qla_host { #define P2P_LOOP 3 uint8_t marker_needed; - uint8_t sns_retry_cnt; - uint8_t mem_err; uint8_t interrupts_on; @@ -2138,16 +2102,11 @@ typedef struct scsi_qla_host { uint16_t nvram_base; uint16_t loop_reset_delay; - uint16_t minimum_timeout; uint8_t retry_count; uint8_t login_timeout; uint16_t r_a_tov; int port_down_retry_count; - uint8_t loop_down_timeout; uint8_t mbx_count; - uint16_t max_probe_luns; - uint16_t max_luns; - uint16_t max_targets; uint16_t last_loop_id; uint32_t login_retry_count; @@ -2181,7 +2140,6 @@ typedef struct scsi_qla_host { uint8_t dpc_active; /* DPC routine is active */ /* Timeout timers. */ - uint8_t queue_restart_timer; uint8_t loop_down_abort_time; /* port down timer */ atomic_t loop_down_timer; /* loop down timer */ uint8_t link_down_timeout; /* link down timeout */ @@ -2230,18 +2188,6 @@ typedef struct scsi_qla_host { mbx_cmd_t mc; - uint8_t *cmdline; - - uint32_t failover_type; - uint32_t failback_delay; - unsigned long cfg_flags; -#define CFG_ACTIVE 0 /* CFG during a failover, event update, or ioctl */ -#define CFG_FAILOVER 1 /* CFG during path change */ - - uint32_t binding_type; -#define BIND_BY_PORT_NAME 0 -#define BIND_BY_PORT_ID 1 - /* Basic firmware related information. */ struct qla_board_info *brd_info; uint16_t fw_major_version; @@ -2274,12 +2220,6 @@ typedef struct scsi_qla_host { uint8_t nvram_version; uint32_t isp_abort_cnt; - /* Adapter I/O statistics for failover */ - uint64_t IosRequested; - uint64_t BytesRequested; - uint64_t IosExecuted; - uint64_t BytesExecuted; - /* Needed for BEACON */ uint16_t beacon_blink_led; uint16_t beacon_green_on; diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index 2efec6c24d60..164866b199e6 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -53,27 +53,13 @@ extern void qla2x00_reg_remote_port(scsi_qla_host_t *, fc_port_t *); */ extern char qla2x00_version_str[]; -extern int num_hosts; -extern int apiHBAInstance; - -extern struct _qla2x00stats qla2x00_stats; -extern int ql2xretrycount; extern int ql2xlogintimeout; extern int qlport_down_retry; -extern int ql2xmaxqdepth; -extern int displayConfig; extern int ql2xplogiabsentdevice; extern int ql2xenablezio; extern int ql2xintrdelaytimer; extern int ql2xloginretrycount; -extern int ConfigRequired; - -extern int Bind; -extern int ql2xsuspendcount; -#if defined(MODULE) -extern char *ql2xopts; -#endif extern void qla2x00_sp_compl(scsi_qla_host_t *, srb_t *); extern char *qla2x00_get_fw_version_str(struct scsi_qla_host *, char *); diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 0387005fcb6d..7629558eba25 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -85,9 +85,7 @@ qla2x00_initialize_adapter(scsi_qla_host_t *ha) atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME); atomic_set(&ha->loop_state, LOOP_DOWN); ha->device_flags = 0; - ha->sns_retry_cnt = 0; ha->dpc_flags = 0; - ha->failback_delay = 0; ha->flags.management_server_logged_in = 0; ha->marker_needed = 0; ha->mbx_flags = 0; @@ -171,8 +169,6 @@ check_fw_ready_again: if (wait_time == 0) rval = QLA_FUNCTION_FAILED; - if (ha->mem_err) - restart_risc = 1; } else if (ha->device_flags & DFLG_NO_CABLE) /* If no cable, then all is good. */ rval = QLA_SUCCESS; @@ -1410,13 +1406,8 @@ qla2x00_nvram_config(scsi_qla_host_t *ha) /* Set minimum RATOV to 200 tenths of a second. */ ha->r_a_tov = 200; - ha->minimum_timeout = - (ha->login_timeout * ha->retry_count) + nv->port_down_retry_count; ha->loop_reset_delay = nv->reset_delay; - /* Will get the value from NVRAM. */ - ha->loop_down_timeout = LOOP_DOWN_TIMEOUT; - /* Link Down Timeout = 0: * * When Port Down timer expires we will start returning @@ -1429,18 +1420,13 @@ qla2x00_nvram_config(scsi_qla_host_t *ha) */ if (nv->link_down_timeout == 0) { ha->loop_down_abort_time = - (LOOP_DOWN_TIME - ha->loop_down_timeout); + (LOOP_DOWN_TIME - LOOP_DOWN_TIMEOUT); } else { ha->link_down_timeout = nv->link_down_timeout; ha->loop_down_abort_time = (LOOP_DOWN_TIME - ha->link_down_timeout); } - ha->max_luns = MAX_LUNS; - ha->max_probe_luns = le16_to_cpu(nv->max_luns_per_target); - if (ha->max_probe_luns == 0) - ha->max_probe_luns = MIN_LUNS; - /* * Need enough time to try and get the port back. */ @@ -1457,16 +1443,6 @@ qla2x00_nvram_config(scsi_qla_host_t *ha) if (ql2xloginretrycount) ha->login_retry_count = ql2xloginretrycount; - ha->binding_type = Bind; - if (ha->binding_type != BIND_BY_PORT_NAME && - ha->binding_type != BIND_BY_PORT_ID) { - qla_printk(KERN_WARNING, ha, - "Invalid binding type specified (%d), " - "defaulting to BIND_BY_PORT_NAME!!!\n", ha->binding_type); - - ha->binding_type = BIND_BY_PORT_NAME; - } - icb->lun_enables = __constant_cpu_to_le16(0); icb->command_resource_count = 0; icb->immediate_notify_resource_count = 0; @@ -1578,7 +1554,6 @@ qla2x00_configure_loop(scsi_qla_host_t *ha) */ clear_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags); clear_bit(RSCN_UPDATE, &ha->dpc_flags); - ha->mem_err = 0 ; /* Determine what we need to do */ if (ha->current_topology == ISP_CFG_FL && @@ -2707,7 +2682,6 @@ qla2x00_loop_resync(scsi_qla_host_t *ha) rval = QLA_SUCCESS; atomic_set(&ha->loop_state, LOOP_UPDATE); - qla2x00_stats.loop_resync++; clear_bit(ISP_ABORT_RETRY, &ha->dpc_flags); if (ha->flags.online) { if (!(rval = qla2x00_fw_ready(ha))) { @@ -2786,9 +2760,6 @@ qla2x00_abort_isp(scsi_qla_host_t *ha) if (ha->flags.online) { ha->flags.online = 0; clear_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); - qla2x00_stats.ispAbort++; - ha->total_isp_aborts++; /* used by ioctl */ - ha->sns_retry_cnt = 0; qla_printk(KERN_INFO, ha, "Performing ISP error recovery - ha= %p.\n", ha); @@ -2810,8 +2781,6 @@ qla2x00_abort_isp(scsi_qla_host_t *ha) sp = ha->outstanding_cmds[cnt]; if (sp) { ha->outstanding_cmds[cnt] = NULL; - if (ha->actthreads) - ha->actthreads--; sp->flags = 0; sp->cmd->result = DID_RESET << 16; sp->cmd->host_scribble = (unsigned char *)NULL; diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c index af964bb3d870..ecaf9f83b2d4 100644 --- a/drivers/scsi/qla2xxx/qla_iocb.c +++ b/drivers/scsi/qla2xxx/qla_iocb.c @@ -433,11 +433,8 @@ qla2x00_start_scsi(srb_t *sp) } else ha->request_ring_ptr++; - ha->actthreads++; - ha->total_ios++; sp->flags |= SRB_DMA_VALID; sp->state = SRB_ACTIVE_STATE; - sp->u_start = jiffies; /* Set chip new ring index. */ WRT_REG_WORD(ISP_REQ_Q_IN(ha, reg), ha->req_ring_index); diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 6792cfae56e2..e7a8b74157a5 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -91,9 +91,6 @@ qla2100_intr_handler(int irq, void *dev_id, struct pt_regs *regs) } spin_unlock_irqrestore(&ha->hardware_lock, flags); - ha->last_irq_cpu = _smp_processor_id(); - ha->total_isr_cnt++; - if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) && (status & MBX_INTERRUPT) && ha->flags.mbox_int) { spin_lock_irqsave(&ha->mbx_reg_lock, flags); @@ -200,9 +197,6 @@ qla2300_intr_handler(int irq, void *dev_id, struct pt_regs *regs) } spin_unlock_irqrestore(&ha->hardware_lock, flags); - ha->last_irq_cpu = _smp_processor_id(); - ha->total_isr_cnt++; - if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) && (status & MBX_INTERRUPT) && ha->flags.mbox_int) { spin_lock_irqsave(&ha->mbx_reg_lock, flags); @@ -417,7 +411,6 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint32_t mbx) /* Update AEN queue. */ qla2x00_enqueue_aen(ha, MBA_LIP_OCCURRED, NULL); - ha->total_lip_cnt++; break; case MBA_LOOP_UP: /* Loop Up Event */ @@ -485,7 +478,6 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint32_t mbx) /* Update AEN queue. */ qla2x00_enqueue_aen(ha, MBA_LIP_RESET, NULL); - ha->total_lip_cnt++; break; case MBA_POINT_TO_POINT: /* Point-to-Point */ @@ -695,14 +687,11 @@ qla2x00_process_completed_request(struct scsi_qla_host *ha, uint32_t index) /* Free outstanding command slot. */ ha->outstanding_cmds[index] = NULL; - if (ha->actthreads) - ha->actthreads--; CMD_COMPL_STATUS(sp->cmd) = 0L; CMD_SCSI_STATUS(sp->cmd) = 0L; /* Save ISP completion status */ sp->cmd->result = DID_OK << 16; - sp->fo_retry_cnt = 0; qla2x00_sp_compl(ha, sp); } else { DEBUG2(printk("scsi(%ld): Invalid ISP SCSI completion handle\n", @@ -865,9 +854,6 @@ qla2x00_status_entry(scsi_qla_host_t *ha, sts_entry_t *pkt) return; } - if (ha->actthreads) - ha->actthreads--; - comp_status = le16_to_cpu(pkt->comp_status); /* Mask of reserved bits 12-15, before we examine the scsi status */ scsi_status = le16_to_cpu(pkt->scsi_status) & SS_MASK; @@ -1026,7 +1012,6 @@ qla2x00_status_entry(scsi_qla_host_t *ha, sts_entry_t *pkt) cp->request_bufflen)); cp->result = DID_BUS_BUSY << 16; - ha->dropped_frame_error_cnt++; break; } @@ -1233,8 +1218,7 @@ qla2x00_error_entry(scsi_qla_host_t *ha, sts_entry_t *pkt) if (sp) { /* Free outstanding command slot. */ ha->outstanding_cmds[pkt->handle] = NULL; - if (ha->actthreads) - ha->actthreads--; + /* Bad payload or header */ if (pkt->entry_status & (RF_INV_E_ORDER | RF_INV_E_COUNT | diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 15f6acaca305..eeaec7c50e6a 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -219,10 +219,8 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp) ha->flags.mbox_int = 0; clear_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags); - if (ha->mailbox_out[0] != MBS_COMMAND_COMPLETE) { - qla2x00_stats.mboxerr++; + if (ha->mailbox_out[0] != MBS_COMMAND_COMPLETE) rval = QLA_FUNCTION_FAILED; - } /* Load return mailbox registers. */ iptr2 = mcp->mb; @@ -249,8 +247,6 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp) qla2x00_dump_regs(ha); #endif - qla2x00_stats.mboxtout++; - ha->total_mbx_timeout++; rval = QLA_FUNCTION_TIMEOUT; } diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 579448222d69..7f8d747bd5e5 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -36,27 +36,12 @@ char qla2x00_version_str[40]; /* * SRB allocation cache */ -char srb_cachep_name[16]; -kmem_cache_t *srb_cachep; - -/* - * Stats for all adpaters. - */ -struct _qla2x00stats qla2x00_stats; +static kmem_cache_t *srb_cachep; /* * Ioctl related information. */ -int num_hosts; -int apiHBAInstance; - -/* - * Module parameter information and variables - */ -int ql2xmaxqdepth; -module_param(ql2xmaxqdepth, int, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(ql2xmaxqdepth, - "Maximum queue depth to report for target devices."); +static int num_hosts; int ql2xlogintimeout = 20; module_param(ql2xlogintimeout, int, S_IRUGO|S_IRUSR); @@ -69,12 +54,6 @@ MODULE_PARM_DESC(qlport_down_retry, "Maximum number of command retries to a port that returns" "a PORT-DOWN status."); -int ql2xretrycount = 20; -module_param(ql2xretrycount, int, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(ql2xretrycount, - "Maximum number of mid-layer retries allowed for a command. " - "Default value is 20, "); - int ql2xplogiabsentdevice; module_param(ql2xplogiabsentdevice, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xplogiabsentdevice, @@ -95,25 +74,6 @@ MODULE_PARM_DESC(ql2xintrdelaytimer, "ZIO: Waiting time for Firmware before it generates an " "interrupt to the host to notify completion of request."); -int ConfigRequired; -module_param(ConfigRequired, int, S_IRUGO|S_IRUSR); -MODULE_PARM_DESC(ConfigRequired, - "If 1, then only configured devices passed in through the" - "ql2xopts parameter will be presented to the OS"); - -int Bind = BIND_BY_PORT_NAME; -module_param(Bind, int, S_IRUGO|S_IRUSR); -MODULE_PARM_DESC(Bind, - "Target persistent binding method: " - "0 by Portname (default); 1 by PortID; 2 by Nodename. "); - -int ql2xsuspendcount = SUSPEND_COUNT; -module_param(ql2xsuspendcount, int, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(ql2xsuspendcount, - "Number of 6-second suspend iterations to perform while a " - "target returns a status. Default is 10 " - "iterations."); - int ql2xloginretrycount = 0; module_param(ql2xloginretrycount, int, S_IRUGO|S_IRUSR); MODULE_PARM_DESC(ql2xloginretrycount, @@ -330,7 +290,6 @@ qla2x00_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) sp->fcport = fcport; sp->cmd = cmd; sp->flags = 0; - sp->err_id = 0; CMD_SP(cmd) = (void *)sp; cmd->scsi_done = done; @@ -474,7 +433,6 @@ qla2x00_wait_for_loop_ready(scsi_qla_host_t *ha) while ((!atomic_read(&ha->loop_down_timer) && atomic_read(&ha->loop_state) == LOOP_DOWN) || - test_bit(CFG_ACTIVE, &ha->cfg_flags) || atomic_read(&ha->loop_state) != LOOP_READY) { msleep(1000); if (time_after_eq(jiffies, loop_timeout)) { @@ -1194,34 +1152,24 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) spin_lock_init(&ha->hardware_lock); - /* 4.23 Initialize /proc/scsi/qla2x00 counters */ - ha->actthreads = 0; - ha->qthreads = 0; - ha->total_isr_cnt = 0; - ha->total_isp_aborts = 0; - ha->total_lip_cnt = 0; - ha->total_dev_errs = 0; - ha->total_ios = 0; - ha->total_bytes = 0; - ha->prev_topology = 0; ha->ports = MAX_BUSES; if (IS_QLA2100(ha)) { - ha->max_targets = MAX_TARGETS_2100; + host->max_id = MAX_TARGETS_2100; ha->mbx_count = MAILBOX_REGISTER_COUNT_2100; ha->request_q_length = REQUEST_ENTRY_CNT_2100; ha->response_q_length = RESPONSE_ENTRY_CNT_2100; ha->last_loop_id = SNS_LAST_LOOP_ID_2100; host->sg_tablesize = 32; } else if (IS_QLA2200(ha)) { - ha->max_targets = MAX_TARGETS_2200; + host->max_id = MAX_TARGETS_2200; ha->mbx_count = MAILBOX_REGISTER_COUNT; ha->request_q_length = REQUEST_ENTRY_CNT_2200; ha->response_q_length = RESPONSE_ENTRY_CNT_2100; ha->last_loop_id = SNS_LAST_LOOP_ID_2100; } else /*if (IS_QLA2300(ha))*/ { - ha->max_targets = MAX_TARGETS_2200; + host->max_id = MAX_TARGETS_2200; ha->mbx_count = MAILBOX_REGISTER_COUNT; ha->request_q_length = REQUEST_ENTRY_CNT_2200; ha->response_q_length = RESPONSE_ENTRY_CNT_2300; @@ -1265,8 +1213,7 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) host->unique_id = ha->instance; host->max_cmd_len = MAX_CMDSZ; host->max_channel = ha->ports - 1; - host->max_id = ha->max_targets; - host->max_lun = ha->max_luns; + host->max_lun = MAX_LUNS; host->transportt = qla2xxx_transport_template; if (scsi_add_host(host, &pdev->dev)) goto probe_alloc_failed; @@ -2336,8 +2283,7 @@ static int __init qla2x00_module_init(void) { /* Allocate cache for SRBs. */ - sprintf(srb_cachep_name, "qla2xxx_srbs"); - srb_cachep = kmem_cache_create(srb_cachep_name, sizeof(srb_t), 0, + srb_cachep = kmem_cache_create("qla2xxx_srbs", sizeof(srb_t), 0, SLAB_HWCACHE_ALIGN, NULL, NULL); if (srb_cachep == NULL) { printk(KERN_ERR @@ -2365,16 +2311,7 @@ qla2x00_module_init(void) static void __exit qla2x00_module_exit(void) { - /* Free SRBs cache. */ - if (srb_cachep != NULL) { - if (kmem_cache_destroy(srb_cachep) != 0) { - printk(KERN_ERR - "qla2xxx: Unable to free SRB cache...Memory pools " - "still active?\n"); - } - srb_cachep = NULL; - } - + kmem_cache_destroy(srb_cachep); fc_release_transport(qla2xxx_transport_template); } -- cgit v1.2.2 From 93fc4294fc112ce4e518a3f62dea8681dc39d9cf Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 27 Apr 2005 06:05:56 -0700 Subject: [SCSI] qla trivial iomem annotation Signed-off-by: Al Viro Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_sup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi/qla2xxx') diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index 0e75fbb77b6b..32583bbb487f 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -85,7 +85,7 @@ qla2x00_unlock_nvram_access(scsi_qla_host_t *ha) void qla2x00_release_nvram_protection(scsi_qla_host_t *ha) { - device_reg_t *reg; + device_reg_t __iomem *reg; uint32_t word; reg = ha->iobase; -- cgit v1.2.2 From 8fa728a26886f56a9ee10a44fea0ddda301d21c3 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 28 May 2005 07:54:40 -0400 Subject: [SCSI] allow sleeping in ->eh_abort_handler() Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/scsi/qla2xxx') diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 7f8d747bd5e5..1693998aa727 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -476,7 +476,6 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) serial = cmd->serial_number; /* Check active list for command command. */ - spin_unlock_irq(ha->host->host_lock); spin_lock(&ha->hardware_lock); for (i = 1; i < MAX_OUTSTANDING_COMMANDS; i++) { sp = ha->outstanding_cmds[i]; @@ -516,7 +515,6 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) } spin_lock(&ha->hardware_lock); } - spin_lock_irq(ha->host->host_lock); qla_printk(KERN_INFO, ha, "scsi(%ld:%d:%d): Abort command issued -- %lx %x.\n", ha->host_no, -- cgit v1.2.2 From 94d0e7b805961c44e4dc486ffc21075084bb7175 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 28 May 2005 07:55:48 -0400 Subject: [SCSI] allow sleeping in ->eh_device_reset_handler() Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'drivers/scsi/qla2xxx') diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 1693998aa727..360974eb2b26 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -613,12 +613,8 @@ qla2xxx_eh_device_reset(struct scsi_cmnd *cmd) qla_printk(KERN_INFO, ha, "scsi(%ld:%d:%d): DEVICE RESET ISSUED.\n", ha->host_no, id, lun); - spin_unlock_irq(ha->host->host_lock); - - if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS) { - spin_lock_irq(ha->host->host_lock); + if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS) goto eh_dev_reset_done; - } if (qla2x00_wait_for_loop_ready(ha) == QLA_SUCCESS) { if (qla2x00_device_reset(ha, fcport) == 0) @@ -669,8 +665,6 @@ qla2xxx_eh_device_reset(struct scsi_cmnd *cmd) "scsi(%ld:%d:%d): DEVICE RESET SUCCEEDED.\n", ha->host_no, id, lun); eh_dev_reset_done: - spin_lock_irq(ha->host->host_lock); - return ret; } -- cgit v1.2.2 From 68b3aa7c9805aee9005a8ca53c5e99177961fbb9 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 28 May 2005 07:56:31 -0400 Subject: [SCSI] allow sleeping in ->eh_bus_reset_handler() Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers/scsi/qla2xxx') diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 360974eb2b26..e9091f9fbf25 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -753,8 +753,6 @@ qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd) qla_printk(KERN_INFO, ha, "scsi(%ld:%d:%d): LOOP RESET ISSUED.\n", ha->host_no, id, lun); - spin_unlock_irq(ha->host->host_lock); - if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS) { DEBUG2(printk("%s failed:board disabled\n",__func__)); goto eh_bus_reset_done; @@ -776,8 +774,6 @@ eh_bus_reset_done: qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__, (ret == FAILED) ? "failed" : "succeded"); - spin_lock_irq(ha->host->host_lock); - return ret; } -- cgit v1.2.2 From df0ae2497ddefd72a87f3a3b34ff32455d7d4ae0 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 28 May 2005 07:57:14 -0400 Subject: [SCSI] allow sleeping in ->eh_host_reset_handler() Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers/scsi/qla2xxx') diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index e9091f9fbf25..f12a2b6fa7a0 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -815,8 +815,6 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd) qla_printk(KERN_INFO, ha, "scsi(%ld:%d:%d): ADAPTER RESET ISSUED.\n", ha->host_no, id, lun); - spin_unlock_irq(ha->host->host_lock); - if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS) goto eh_host_reset_lock; @@ -845,8 +843,6 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd) ret = SUCCESS; eh_host_reset_lock: - spin_lock_irq(ha->host->host_lock); - qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__, (ret == FAILED) ? "failed" : "succeded"); -- cgit v1.2.2