From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/ieee1394/ieee1394.h | 202 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 202 insertions(+) create mode 100644 drivers/ieee1394/ieee1394.h (limited to 'drivers/ieee1394/ieee1394.h') diff --git a/drivers/ieee1394/ieee1394.h b/drivers/ieee1394/ieee1394.h new file mode 100644 index 000000000000..b634a9bb365c --- /dev/null +++ b/drivers/ieee1394/ieee1394.h @@ -0,0 +1,202 @@ +/* + * Generic IEEE 1394 definitions + */ + +#ifndef _IEEE1394_IEEE1394_H +#define _IEEE1394_IEEE1394_H + +#define TCODE_WRITEQ 0x0 +#define TCODE_WRITEB 0x1 +#define TCODE_WRITE_RESPONSE 0x2 +#define TCODE_READQ 0x4 +#define TCODE_READB 0x5 +#define TCODE_READQ_RESPONSE 0x6 +#define TCODE_READB_RESPONSE 0x7 +#define TCODE_CYCLE_START 0x8 +#define TCODE_LOCK_REQUEST 0x9 +#define TCODE_ISO_DATA 0xa +#define TCODE_STREAM_DATA 0xa +#define TCODE_LOCK_RESPONSE 0xb + +#define RCODE_COMPLETE 0x0 +#define RCODE_CONFLICT_ERROR 0x4 +#define RCODE_DATA_ERROR 0x5 +#define RCODE_TYPE_ERROR 0x6 +#define RCODE_ADDRESS_ERROR 0x7 + +#define EXTCODE_MASK_SWAP 0x1 +#define EXTCODE_COMPARE_SWAP 0x2 +#define EXTCODE_FETCH_ADD 0x3 +#define EXTCODE_LITTLE_ADD 0x4 +#define EXTCODE_BOUNDED_ADD 0x5 +#define EXTCODE_WRAP_ADD 0x6 + +#define ACK_COMPLETE 0x1 +#define ACK_PENDING 0x2 +#define ACK_BUSY_X 0x4 +#define ACK_BUSY_A 0x5 +#define ACK_BUSY_B 0x6 +#define ACK_TARDY 0xb +#define ACK_CONFLICT_ERROR 0xc +#define ACK_DATA_ERROR 0xd +#define ACK_TYPE_ERROR 0xe +#define ACK_ADDRESS_ERROR 0xf + +/* Non-standard "ACK codes" for internal use */ +#define ACKX_NONE (-1) +#define ACKX_SEND_ERROR (-2) +#define ACKX_ABORTED (-3) +#define ACKX_TIMEOUT (-4) + + +#define IEEE1394_SPEED_100 0x00 +#define IEEE1394_SPEED_200 0x01 +#define IEEE1394_SPEED_400 0x02 +#define IEEE1394_SPEED_800 0x03 +#define IEEE1394_SPEED_1600 0x04 +#define IEEE1394_SPEED_3200 0x05 +/* The current highest tested speed supported by the subsystem */ +#define IEEE1394_SPEED_MAX IEEE1394_SPEED_800 + +/* Maps speed values above to a string representation */ +extern const char *hpsb_speedto_str[]; + + +#define SELFID_PWRCL_NO_POWER 0x0 +#define SELFID_PWRCL_PROVIDE_15W 0x1 +#define SELFID_PWRCL_PROVIDE_30W 0x2 +#define SELFID_PWRCL_PROVIDE_45W 0x3 +#define SELFID_PWRCL_USE_1W 0x4 +#define SELFID_PWRCL_USE_3W 0x5 +#define SELFID_PWRCL_USE_6W 0x6 +#define SELFID_PWRCL_USE_10W 0x7 + +#define SELFID_PORT_CHILD 0x3 +#define SELFID_PORT_PARENT 0x2 +#define SELFID_PORT_NCONN 0x1 +#define SELFID_PORT_NONE 0x0 + + +/* 1394a PHY bitmasks */ +#define PHY_00_PHYSICAL_ID 0xFC +#define PHY_00_R 0x02 /* Root */ +#define PHY_00_PS 0x01 /* Power Status*/ +#define PHY_01_RHB 0x80 /* Root Hold-Off */ +#define PHY_01_IBR 0x80 /* Initiate Bus Reset */ +#define PHY_01_GAP_COUNT 0x3F +#define PHY_02_EXTENDED 0xE0 /* 0x7 for 1394a-compliant PHY */ +#define PHY_02_TOTAL_PORTS 0x1F +#define PHY_03_MAX_SPEED 0xE0 +#define PHY_03_DELAY 0x0F +#define PHY_04_LCTRL 0x80 /* Link Active Report Control */ +#define PHY_04_CONTENDER 0x40 +#define PHY_04_JITTER 0x38 +#define PHY_04_PWR_CLASS 0x07 /* Power Class */ +#define PHY_05_WATCHDOG 0x80 +#define PHY_05_ISBR 0x40 /* Initiate Short Bus Reset */ +#define PHY_05_LOOP 0x20 /* Loop Detect */ +#define PHY_05_PWR_FAIL 0x10 /* Cable Power Failure Detect */ +#define PHY_05_TIMEOUT 0x08 /* Arbitration State Machine Timeout */ +#define PHY_05_PORT_EVENT 0x04 /* Port Event Detect */ +#define PHY_05_ENAB_ACCEL 0x02 /* Enable Arbitration Acceleration */ +#define PHY_05_ENAB_MULTI 0x01 /* Ena. Multispeed Packet Concatenation */ + +#include + +#ifdef __BIG_ENDIAN_BITFIELD + +struct selfid { + u32 packet_identifier:2; /* always binary 10 */ + u32 phy_id:6; + /* byte */ + u32 extended:1; /* if true is struct ext_selfid */ + u32 link_active:1; + u32 gap_count:6; + /* byte */ + u32 speed:2; + u32 phy_delay:2; + u32 contender:1; + u32 power_class:3; + /* byte */ + u32 port0:2; + u32 port1:2; + u32 port2:2; + u32 initiated_reset:1; + u32 more_packets:1; +} __attribute__((packed)); + +struct ext_selfid { + u32 packet_identifier:2; /* always binary 10 */ + u32 phy_id:6; + /* byte */ + u32 extended:1; /* if false is struct selfid */ + u32 seq_nr:3; + u32 reserved:2; + u32 porta:2; + /* byte */ + u32 portb:2; + u32 portc:2; + u32 portd:2; + u32 porte:2; + /* byte */ + u32 portf:2; + u32 portg:2; + u32 porth:2; + u32 reserved2:1; + u32 more_packets:1; +} __attribute__((packed)); + +#elif defined __LITTLE_ENDIAN_BITFIELD /* __BIG_ENDIAN_BITFIELD */ + +/* + * Note: these mean to be bit fields of a big endian SelfID as seen on a little + * endian machine. Without swapping. + */ + +struct selfid { + u32 phy_id:6; + u32 packet_identifier:2; /* always binary 10 */ + /* byte */ + u32 gap_count:6; + u32 link_active:1; + u32 extended:1; /* if true is struct ext_selfid */ + /* byte */ + u32 power_class:3; + u32 contender:1; + u32 phy_delay:2; + u32 speed:2; + /* byte */ + u32 more_packets:1; + u32 initiated_reset:1; + u32 port2:2; + u32 port1:2; + u32 port0:2; +} __attribute__((packed)); + +struct ext_selfid { + u32 phy_id:6; + u32 packet_identifier:2; /* always binary 10 */ + /* byte */ + u32 porta:2; + u32 reserved:2; + u32 seq_nr:3; + u32 extended:1; /* if false is struct selfid */ + /* byte */ + u32 porte:2; + u32 portd:2; + u32 portc:2; + u32 portb:2; + /* byte */ + u32 more_packets:1; + u32 reserved2:1; + u32 porth:2; + u32 portg:2; + u32 portf:2; +} __attribute__((packed)); + +#else +#error What? PDP endian? +#endif /* __BIG_ENDIAN_BITFIELD */ + + +#endif /* _IEEE1394_IEEE1394_H */ -- cgit v1.2.2