From f7d7f866baacc283967ce82ebdfe5d2801059a11 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 6 Apr 2009 23:04:40 -0700 Subject: x86, intel-iommu: fix X2APIC && !ACPI build failure MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This build failure: | drivers/pci/dmar.c:47: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘dmar_tbl_size’ | drivers/pci/dmar.c:62: warning: ‘struct acpi_dmar_device_scope’ declared inside parameter list | drivers/pci/dmar.c:62: warning: its scope is only this definition or declaration, which is probably not what you want Triggers due to this commit: d0b03bd: x2apic/intr-remap: decouple interrupt remapping from x2apic Which exposed a pre-existing but dormant fragility of the 'select X86_X2APIC' it moved around and turned that fragility into a build failure. Replace it with a proper 'depends on' construct. Signed-off-by: David Woodhouse LKML-Reference: <1239084280.22733.404.camel@macbook.infradead.org> Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 4b3408206091..bc25b9f5e4cd 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -252,17 +252,13 @@ config SMP config X86_X2APIC bool "Support x2apic" - depends on X86_LOCAL_APIC && X86_64 - select INTR_REMAP + depends on X86_LOCAL_APIC && X86_64 && INTR_REMAP ---help--- This enables x2apic support on CPUs that have this feature. This allows 32-bit apic IDs (so it can support very large systems), and accesses the local apic via MSRs not via mmio. - ( On certain CPU models you may need to enable INTR_REMAP too, - to get functional x2apic mode. ) - If you don't know what to do here, say N. config SPARSE_IRQ -- cgit v1.2.2 From 1e274a582710e95d93b86e8d47e9fcce4ca09d01 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Tue, 7 Apr 2009 10:59:25 -0700 Subject: x86, setup: un-resequence mode setting for VGA 80x34 and 80x60 modes Impact: Fixes these modes on at least one system The rewrite of the setup code into C resequenced the font setting and register reprogramming phases of configuring nonstandard VGA modes which use 480 scan lines in text mode. However, there exists at least one board (Micro-Star MS-7383 version 2.0) on which this resequencing causes an unusable display. Revert to the original sequencing: set up 480-line mode, install the font, and then adjust the vertical end register appropriately. This failure was masked by the fact that the 480-line setup was broken until checkin 5f641356127712fbdce0eee120e5ce115860c17f (therefore this is not a -stable candidate bug fix.) Reported-by: Andi Kleen Signed-off-by: H. Peter Anvin --- arch/x86/boot/video-vga.c | 33 +++++++++++++++++++++++---------- 1 file changed, 23 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/x86/boot/video-vga.c b/arch/x86/boot/video-vga.c index 95d86ce0421c..9e0587a37768 100644 --- a/arch/x86/boot/video-vga.c +++ b/arch/x86/boot/video-vga.c @@ -129,22 +129,18 @@ u16 vga_crtc(void) return (inb(0x3cc) & 1) ? 0x3d4 : 0x3b4; } -static void vga_set_480_scanlines(int lines) +static void vga_set_480_scanlines(void) { u16 crtc; /* CRTC base address */ u8 csel; /* CRTC miscellaneous output register */ - u8 ovfw; /* CRTC overflow register */ - int end = lines-1; crtc = vga_crtc(); - ovfw = 0x3c | ((end >> (8-1)) & 0x02) | ((end >> (9-6)) & 0x40); - out_idx(0x0c, crtc, 0x11); /* Vertical sync end, unlock CR0-7 */ out_idx(0x0b, crtc, 0x06); /* Vertical total */ - out_idx(ovfw, crtc, 0x07); /* Vertical overflow */ + out_idx(0x3e, crtc, 0x07); /* Vertical overflow */ out_idx(0xea, crtc, 0x10); /* Vertical sync start */ - out_idx(end, crtc, 0x12); /* Vertical display end */ + out_idx(0xdf, crtc, 0x12); /* Vertical display end */ out_idx(0xe7, crtc, 0x15); /* Vertical blank start */ out_idx(0x04, crtc, 0x16); /* Vertical blank end */ csel = inb(0x3cc); @@ -153,21 +149,38 @@ static void vga_set_480_scanlines(int lines) outb(csel, 0x3c2); } +static void vga_set_vertical_end(int lines) +{ + u16 crtc; /* CRTC base address */ + u8 ovfw; /* CRTC overflow register */ + int end = lines-1; + + crtc = vga_crtc(); + + ovfw = 0x3c | ((end >> (8-1)) & 0x02) | ((end >> (9-6)) & 0x40); + + out_idx(ovfw, crtc, 0x07); /* Vertical overflow */ + out_idx(end, crtc, 0x12); /* Vertical display end */ +} + static void vga_set_80x30(void) { - vga_set_480_scanlines(30*16); + vga_set_480_scanlines(); + vga_set_vertical_end(30*16); } static void vga_set_80x34(void) { + vga_set_480_scanlines(); vga_set_14font(); - vga_set_480_scanlines(34*14); + vga_set_vertical_end(34*14); } static void vga_set_80x60(void) { + vga_set_480_scanlines(); vga_set_8font(); - vga_set_480_scanlines(60*8); + vga_set_vertical_end(60*8); } static int vga_set_mode(struct mode_info *mode) -- cgit v1.2.2 From 08d63b10db943d4e1ff5ae3abc33467f037477f3 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 8 Apr 2009 08:00:01 -0700 Subject: x86: make 64 bit to use default_inquire_remote_apic Impact: restore old behavior for flat and phys_flat Signed-off-by: Yinhai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/apic_flat_64.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c index 0014714ea97b..306e5e88fb6f 100644 --- a/arch/x86/kernel/apic/apic_flat_64.c +++ b/arch/x86/kernel/apic/apic_flat_64.c @@ -212,7 +212,7 @@ struct apic apic_flat = { .trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH, .wait_for_init_deassert = NULL, .smp_callin_clear_local_apic = NULL, - .inquire_remote_apic = NULL, + .inquire_remote_apic = default_inquire_remote_apic, .read = native_apic_mem_read, .write = native_apic_mem_write, @@ -362,7 +362,7 @@ struct apic apic_physflat = { .trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH, .wait_for_init_deassert = NULL, .smp_callin_clear_local_apic = NULL, - .inquire_remote_apic = NULL, + .inquire_remote_apic = default_inquire_remote_apic, .read = native_apic_mem_read, .write = native_apic_mem_write, -- cgit v1.2.2 From c5da9a2bb24a7928c39495cdabf98d3f7931bde5 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 26 Mar 2009 20:45:28 +0000 Subject: x86: DMI match for the Dell DXP061 as it needs BIOS reboot Closes http://bugzilla.kernel.org/show_bug.cgi?12901 Signed-off-by: Alan Cox LKML-Reference: <20090326204524.4454.8776.stgit@localhost.localdomain> Signed-off-by: Ingo Molnar --- arch/x86/kernel/reboot.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 2aef36d8aca2..1340dad417f4 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -224,6 +224,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Dell XPS710"), }, }, + { /* Handle problems with rebooting on Dell DXP061 */ + .callback = set_bios_reboot, + .ident = "Dell DXP061", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Dell DXP061"), + }, + }, { } }; -- cgit v1.2.2 From 59d138120d18930ba9a5466662d45a2bd2223455 Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto Date: Wed, 25 Mar 2009 10:50:34 +0900 Subject: x86: smarten /proc/interrupts output for new counters Now /proc/interrupts of tip tree has new counters: PLT: Platform interrupts Format change of output, as like that by commit: commit 7a81d9a7da03d2f27840d659f97ef140d032f609 x86: smarten /proc/interrupts output should be applied to these new counters too. Signed-off-by: Hidetoshi Seto Cc: Jan Beulich LKML-Reference: <49C98DEA.8060208@jp.fujitsu.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 3aaf7b9e3a8b..c3fe010d74c8 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -65,7 +65,7 @@ static int show_other_interrupts(struct seq_file *p, int prec) seq_printf(p, " Spurious interrupts\n"); #endif if (generic_interrupt_extension) { - seq_printf(p, "PLT: "); + seq_printf(p, "%*s: ", prec, "PLT"); for_each_online_cpu(j) seq_printf(p, "%10u ", irq_stats(j)->generic_irqs); seq_printf(p, " Platform interrupts\n"); -- cgit v1.2.2 From f20ab9c38fb85b4dde8b4139788ab9e735a35279 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Wed, 8 Apr 2009 22:49:46 +0530 Subject: x86: cpu_debug remove execute permission It seems by mistake these files got execute permissions so removing it. Signed-off-by: Jaswinder Singh Rajput LKML-Reference: <1239211186.9037.2.camel@ht.satnam> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/cpu_debug.h | 0 arch/x86/kernel/cpu/cpu_debug.c | 0 2 files changed, 0 insertions(+), 0 deletions(-) mode change 100755 => 100644 arch/x86/include/asm/cpu_debug.h mode change 100755 => 100644 arch/x86/kernel/cpu/cpu_debug.c (limited to 'arch') diff --git a/arch/x86/include/asm/cpu_debug.h b/arch/x86/include/asm/cpu_debug.h old mode 100755 new mode 100644 diff --git a/arch/x86/kernel/cpu/cpu_debug.c b/arch/x86/kernel/cpu/cpu_debug.c old mode 100755 new mode 100644 -- cgit v1.2.2