From 6ec3cfeca04622e3d80c9270191cd7f5f88214af Mon Sep 17 00:00:00 2001 From: "Pallipadi, Venkatesh" Date: Mon, 13 Apr 2009 15:20:58 -0700 Subject: x86, irq: Remove IRQ_DISABLED check in process context IRQ move As discussed in the thread here: http://marc.info/?l=linux-kernel&m=123964468521142&w=2 Eric W. Biederman observed: > It looks like some additional bugs have slipped in since last I looked. > > set_irq_affinity does this: > ifdef CONFIG_GENERIC_PENDING_IRQ > if (desc->status & IRQ_MOVE_PCNTXT || desc->status & IRQ_DISABLED) { > cpumask_copy(desc->affinity, cpumask); > desc->chip->set_affinity(irq, cpumask); > } else { > desc->status |= IRQ_MOVE_PENDING; > cpumask_copy(desc->pending_mask, cpumask); > } > #else > > That IRQ_DISABLED case is a software state and as such it has nothing to > do with how safe it is to move an irq in process context. [...] > > The only reason we migrate MSIs in interrupt context today is that there > wasn't infrastructure for support migration both in interrupt context > and outside of it. Yes. The idea here was to force the MSI migration to happen in process context. One of the patches in the series did disable_irq(dev->irq); irq_set_affinity(dev->irq, cpumask_of(dev->cpu)); enable_irq(dev->irq); with the above patch adding irq/manage code check for interrupt disabled and moving the interrupt in process context. IIRC, there was no IRQ_MOVE_PCNTXT when we were developing this HPET code and we ended up having this ugly hack. IRQ_MOVE_PCNTXT was there when we eventually submitted the patch upstream. But, looks like I did a blind rebasing instead of using IRQ_MOVE_PCNTXT in hpet MSI code. Below patch fixes this. i.e., revert commit 932775a4ab622e3c99bd59f14cc and add PCNTXT to HPET MSI setup. Also removes copying of desc->affinity in generic code as set_affinity routines are doing it internally. Reported-by: "Eric W. Biederman" Signed-off-by: Venkatesh Pallipadi Acked-by: "Eric W. Biederman" Cc: "Li Shaohua" Cc: Gary Hade Cc: "lcm@us.ibm.com" Cc: suresh.b.siddha@intel.com LKML-Reference: <20090413222058.GB8211@linux-os.sc.intel.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/io_apic.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index a2789e42e162..30da617d18e4 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -3670,12 +3670,14 @@ int arch_setup_hpet_msi(unsigned int irq) { int ret; struct msi_msg msg; + struct irq_desc *desc = irq_to_desc(irq); ret = msi_compose_msg(NULL, irq, &msg); if (ret < 0) return ret; hpet_msi_write(irq, &msg); + desc->status |= IRQ_MOVE_PCNTXT; set_irq_chip_and_handler_name(irq, &hpet_msi_type, handle_edge_irq, "edge"); -- cgit v1.2.2 From eae17754ab1ffc88190ebcbd33b6bec79e6e559a Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 13 Apr 2009 11:48:03 +0100 Subject: [ARM] pxa: merge AC97 platform data structures Currently there are two possible platform datas for the PXA AC97 driver: one supported by the generic AC97 driver only which provides callbacks to allow board-specific configuration at stream startup and teardown, and another for pxa2xx-ac97-lib which allows configuration of the reset GPIO for PXA2xx CPUs. Obviously this won't actually work when using the generic AC97 driver since the drivers will attempt to parse the platform data in both formats. Fix this by merging the two structures. Signed-off-by: Mark Brown Acked-by: Robert Jarzmik Cc: Marek Vasut Signed-off-by: Eric Miao --- arch/arm/mach-pxa/include/mach/audio.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/include/mach/audio.h b/arch/arm/mach-pxa/include/mach/audio.h index f82f96dd1053..16eb02552d5d 100644 --- a/arch/arm/mach-pxa/include/mach/audio.h +++ b/arch/arm/mach-pxa/include/mach/audio.h @@ -4,12 +4,22 @@ #include #include +/* + * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95) + * a -1 value means no gpio will be used for reset + + * reset_gpio should only be specified for pxa27x CPUs where a silicon + * bug prevents correct operation of the reset line. If not specified, + * the default behaviour on these CPUs is to consider gpio 113 as the + * AC97 reset line, which is the default on most boards. + */ typedef struct { int (*startup)(struct snd_pcm_substream *, void *); void (*shutdown)(struct snd_pcm_substream *, void *); void (*suspend)(void *); void (*resume)(void *); void *priv; + int reset_gpio; } pxa2xx_audio_ops_t; extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops); -- cgit v1.2.2 From cc8d2730ad6fe79699cedd9cccfe632570830c3c Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Mon, 13 Apr 2009 16:07:55 +0200 Subject: [ARM] pxa/mioa701: use GPIO95 as AC97 reset line MioA701 board's GPIO95 is the AC97 line. The other GPIO113 is not connected to the sound chip, but to the GSM chip as a wakeup line. It happens that when the pxa2xx_ac97 driver reconfigures the gpio as an "out gpio" for AC97 reset (bug workaround), it hangs the GSM chip. As AC97 platform data now enables to specify the AC97 reset line, use it. Signed-off-by: Robert Jarzmik Signed-off-by: Eric Miao --- arch/arm/mach-pxa/mioa701.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 9203b069b35c..ff8052ce0a05 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -742,6 +742,10 @@ struct i2c_pxa_platform_data i2c_pdata = { .fast_mode = 1, }; +static pxa2xx_audio_ops_t mioa701_ac97_info = { + .reset_gpio = 95, +}; + /* * Mio global */ @@ -815,7 +819,7 @@ static void __init mioa701_machine_init(void) pxa_set_keypad_info(&mioa701_keypad_info); wm97xx_bat_set_pdata(&mioa701_battery_data); pxa_set_udc_info(&mioa701_udc_info); - pxa_set_ac97_info(NULL); + pxa_set_ac97_info(&mioa701_ac97_info); pm_power_off = mioa701_poweroff; arm_pm_restart = mioa701_restart; platform_add_devices(devices, ARRAY_SIZE(devices)); -- cgit v1.2.2 From bda9de2c4fff8d7e9ac3ee66ce853716280a21ea Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 16 Apr 2009 15:11:54 -0600 Subject: powerpc/5200: Add FLASH nodes to lite5200 device tree Signed-off-by: Grant Likely --- arch/powerpc/boot/dts/lite5200b.dts | 39 +++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index c63e3566479e..d13cb11ce623 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -293,4 +293,43 @@ 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; }; + + localbus { + compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0xfe000000 0x02000000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <1>; + #size-cells = <1>; + #address-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00200000>; + }; + partition@200000 { + label = "rootfs"; + reg = <0x00200000 0x01d00000>; + }; + partition@1f00000 { + label = "u-boot"; + reg = <0x01f00000 0x00060000>; + }; + partition@1f60000 { + label = "u-boot-env"; + reg = <0x01f60000 0x00020000>; + }; + partition@1f80000 { + label = "dtb"; + reg = <0x01f80000 0x00080000>; + }; + }; + }; + }; -- cgit v1.2.2 From ca713c2ab0eea3458962983e4a7e13430ea479b8 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 15 Apr 2009 18:39:13 -0700 Subject: x86/irq: mark NUMA_MIGRATE_IRQ_DESC broken It causes crash on system with lots of cards with MSI-X when irq_balancer enabled... The patches fixing it were both complex and fragile, according to Eric they were also doing quite dangerous things to the hardware. Instead we now have patches that solve this problem via static NUMA node mappings - not dynamic allocation and balancing. The patches are much simpler than this method but are still too large outside of the merge window, so we mark the dynamic balancer as broken for now, and queue up the new approach for v2.6.31. [ Impact: deactivate broken kernel feature ] Reported-by: Suresh Siddha Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: "Eric W. Biederman" Cc: Rusty Russell LKML-Reference: <49E68C41.4020801@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index bc25b9f5e4cd..b1d2be7d91a0 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -277,6 +277,7 @@ config SPARSE_IRQ config NUMA_MIGRATE_IRQ_DESC bool "Move irq desc when changing irq smp_affinity" depends on SPARSE_IRQ && NUMA + depends on BROKEN default n ---help--- This enables moving irq_desc to cpu/node that irq will use handled. -- cgit v1.2.2 From 60c8a774fb7971cec4a72fd5d002f39668826808 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 17 Apr 2009 03:59:42 -0700 Subject: sparc64: Update defconfig. Signed-off-by: David S. Miller --- arch/sparc/configs/sparc64_defconfig | 182 +++++++++++++++++++++++------------ 1 file changed, 119 insertions(+), 63 deletions(-) (limited to 'arch') diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig index ade49941def2..b5d63bd8716e 100644 --- a/arch/sparc/configs/sparc64_defconfig +++ b/arch/sparc/configs/sparc64_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28 -# Fri Jan 2 18:14:26 2009 +# Linux kernel version: 2.6.30-rc2 +# Fri Apr 17 02:03:07 2009 # +CONFIG_64BIT=y CONFIG_SPARC=y +# CONFIG_SPARC32 is not set CONFIG_SPARC64=y CONFIG_ARCH_DEFCONFIG="arch/sparc/configs/sparc64_defconfig" CONFIG_BITS=64 -CONFIG_64BIT=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_CLOCKEVENTS=y @@ -22,6 +23,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_MMU=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_OF=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -36,17 +38,27 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=18 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y CONFIG_RT_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_RELAY=y @@ -55,24 +67,28 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -82,6 +98,7 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -91,15 +108,16 @@ CONFIG_TRACEPOINTS=y CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y +CONFIG_HAVE_SYSCALL_WRAPPERS=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -107,10 +125,8 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -CONFIG_BLK_DEV_IO_TRACE=y CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y @@ -127,11 +143,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -185,11 +196,12 @@ CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -CONFIG_RESOURCES_64BIT=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=1 CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set @@ -210,6 +222,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set CONFIG_SUN_OPENPROMFS=m CONFIG_SPARC64_PCI=y @@ -229,8 +243,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NET_NS is not set -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -292,25 +304,7 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set -CONFIG_IP_DCCP=m -CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y - -# -# DCCP CCIDs Configuration (EXPERIMENTAL) -# -CONFIG_IP_DCCP_CCID2=m -# CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m - -# -# DCCP Kernel Hacking -# -# CONFIG_IP_DCCP_DEBUG is not set -# CONFIG_NET_DCCPPROBE is not set +# CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set @@ -326,6 +320,7 @@ CONFIG_VLAN_8021Q=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -334,18 +329,19 @@ CONFIG_VLAN_8021Q=m # CONFIG_NET_PKTGEN=m CONFIG_NET_TCPPROBE=m +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -389,19 +385,27 @@ CONFIG_SUNVDC=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set @@ -439,6 +443,7 @@ CONFIG_BLK_DEV_ALI15X3=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set @@ -506,8 +511,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -528,6 +535,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SUNESP is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m @@ -536,7 +544,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m CONFIG_MD_RAID456=m -# CONFIG_MD_RAID5_RESHAPE is not set +CONFIG_MD_RAID6_PQ=m CONFIG_MD_MULTIPATH=m # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -561,6 +569,7 @@ CONFIG_DM_ZERO=m # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -589,14 +598,16 @@ CONFIG_PHYLIB=m # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=m -# CONFIG_SUNLANCE is not set -# CONFIG_HAPPYMEAL is not set +CONFIG_SUNLANCE=m +CONFIG_HAPPYMEAL=m # CONFIG_SUNBMAC is not set # CONFIG_SUNQE is not set -# CONFIG_SUNGEM is not set -CONFIG_CASSINI=m +CONFIG_SUNGEM=m +# CONFIG_CASSINI is not set CONFIG_SUNVNET=m # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -631,9 +642,10 @@ CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=m -# CONFIG_E1000E is not set +CONFIG_E1000E=m # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_MYRI_SBUS is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set @@ -648,6 +660,7 @@ CONFIG_BNX2=m # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -657,6 +670,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set CONFIG_NIU=m @@ -666,6 +680,7 @@ CONFIG_NIU=m # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -673,7 +688,10 @@ CONFIG_NIU=m # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -738,7 +756,6 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -805,6 +822,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_HW_RANDOM_N2RNG=m # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -867,12 +885,9 @@ CONFIG_I2C_ALGOBIT=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -897,12 +912,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -917,10 +934,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -957,10 +978,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # @@ -1053,6 +1076,7 @@ CONFIG_FB_ATY_GX=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -1141,6 +1165,8 @@ CONFIG_SND_ALI5451=m # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1197,28 +1223,31 @@ CONFIG_USB_HIDDEV=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y +CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_TOPSEED=y # CONFIG_THRUSTMASTER_FF is not set # CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y @@ -1247,6 +1276,7 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -1268,18 +1298,17 @@ CONFIG_USB_UHCI_HCD=m # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1315,7 +1344,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1327,6 +1355,11 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1390,6 +1423,7 @@ CONFIG_RTC_DRV_BQ4802=y CONFIG_RTC_DRV_SUN4V=y CONFIG_RTC_DRV_STARFIRE=y # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1412,6 +1446,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y @@ -1426,6 +1461,7 @@ CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1434,6 +1470,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1460,10 +1501,7 @@ CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_ECRYPT_FS is not set @@ -1473,6 +1511,7 @@ CONFIG_HUGETLB_PAGE=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1481,6 +1520,7 @@ CONFIG_HUGETLB_PAGE=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set @@ -1555,6 +1595,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set @@ -1590,10 +1633,12 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1602,18 +1647,21 @@ CONFIG_TRACING=y # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +CONFIG_BLK_DEV_IO_TRACE=y # CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_DCFLUSH is not set # CONFIG_STACK_DEBUG is not set -# CONFIG_DEBUG_PAGEALLOC is not set # # Security options @@ -1642,10 +1690,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=y CONFIG_CRYPTO_TEST=m @@ -1715,6 +1765,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1723,11 +1774,13 @@ CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m # CONFIG_CRC_T10DIF is not set @@ -1737,8 +1790,11 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y -- cgit v1.2.2 From a40ac3414eb4122345efd071f787a349a30fccf7 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 17 Apr 2009 04:05:06 -0700 Subject: sparc32: Update defconfig. Signed-off-by: David S. Miller --- arch/sparc/configs/sparc32_defconfig | 98 +++++++++++++++++++++++++----------- 1 file changed, 68 insertions(+), 30 deletions(-) (limited to 'arch') diff --git a/arch/sparc/configs/sparc32_defconfig b/arch/sparc/configs/sparc32_defconfig index 09ab46e4c59d..8bcd27af724b 100644 --- a/arch/sparc/configs/sparc32_defconfig +++ b/arch/sparc/configs/sparc32_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28 -# Thu Jan 8 16:45:44 2009 +# Linux kernel version: 2.6.30-rc2 +# Fri Apr 17 04:04:46 2009 # # CONFIG_64BIT is not set CONFIG_SPARC=y @@ -30,17 +30,27 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y CONFIG_RT_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -49,24 +59,28 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -75,12 +89,15 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -93,7 +110,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -109,11 +125,6 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -144,6 +155,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_SUN_PM=y # CONFIG_SPARC_LED is not set CONFIG_SERIAL_CONSOLE=y @@ -159,6 +172,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set CONFIG_SUN_OPENPROMFS=m CONFIG_SPARC32_PCI=y @@ -175,8 +189,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NET_NS is not set -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -251,6 +263,7 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -263,7 +276,6 @@ CONFIG_NET_PKTGEN=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -313,12 +325,16 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -375,8 +391,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -398,6 +416,7 @@ CONFIG_SCSI_QLOGICPTI=m CONFIG_SCSI_SUNESP=y # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -413,6 +432,7 @@ CONFIG_SCSI_SUNESP=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -430,6 +450,8 @@ CONFIG_SUNQE=m # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -448,6 +470,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000 is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_MYRI_SBUS is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set @@ -462,6 +485,7 @@ CONFIG_NETDEV_1000=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -471,6 +495,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -480,6 +505,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -487,7 +513,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -537,7 +562,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -597,6 +621,7 @@ CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -688,7 +713,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -700,7 +724,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -750,6 +774,7 @@ CONFIG_RTC_DRV_M48T59=y # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -777,6 +802,7 @@ CONFIG_FS_POSIX_ACL=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -785,6 +811,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -820,14 +851,20 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=m +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -838,7 +875,6 @@ CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -911,6 +947,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -939,15 +978,7 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set - -# -# Tracers -# -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_PAGE_POISONING is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_KGDB=y @@ -979,10 +1010,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set @@ -1052,6 +1085,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1059,6 +1093,7 @@ CONFIG_CRYPTO_DEFLATE=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1074,7 +1109,10 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.2 From dc098551918093901d8ac8936e9d1a1b891b56ed Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Fri, 17 Apr 2009 09:22:42 -0500 Subject: x86/uv: fix init of memory-less nodes Add support for nodes that have cpus but no memory. The current code was failing to add these nodes to the nodes_present_map. v2: Fixes case caught by David Rientjes - missed support for the x2apic SRAT table. [ Impact: fix potential boot crash on memory-less UV nodes. ] Reported-by: David Rientjes Signed-off-by: Jack Steiner LKML-Reference: <20090417142242.GA23743@sgi.com> Signed-off-by: Ingo Molnar --- arch/x86/mm/srat_64.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index c7d272b8574c..33c5fa57e43d 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -28,6 +28,7 @@ int acpi_numa __initdata; static struct acpi_table_slit *acpi_slit; static nodemask_t nodes_parsed __initdata; +static nodemask_t cpu_nodes_parsed __initdata; static struct bootnode nodes[MAX_NUMNODES] __initdata; static struct bootnode nodes_add[MAX_NUMNODES]; static int found_add_area __initdata; @@ -141,6 +142,7 @@ acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa) apic_id = pa->apic_id; apicid_to_node[apic_id] = node; + node_set(node, cpu_nodes_parsed); acpi_numa = 1; printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n", pxm, apic_id, node); @@ -174,6 +176,7 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) else apic_id = pa->apic_id; apicid_to_node[apic_id] = node; + node_set(node, cpu_nodes_parsed); acpi_numa = 1; printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n", pxm, apic_id, node); @@ -402,7 +405,8 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end) return -1; } - node_possible_map = nodes_parsed; + /* Account for nodes with cpus and no memory */ + nodes_or(node_possible_map, nodes_parsed, cpu_nodes_parsed); /* Finally register nodes */ for_each_node_mask(i, node_possible_map) -- cgit v1.2.2 From 27229ca63269c1be0a710f074fa9de4024f283f1 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Fri, 17 Apr 2009 09:24:47 -0500 Subject: x86/uv: fix init of cpu-less nodes Fix an endcase in the UV initialization code for the "UV large system mode" of apicids. If node zero contains no cpus, cpus on another node will be the boot cpu. The percpu data that contains the extra apicid bits was not being initialized early enough. [ Impact: fix potential boot crash on cpu-less UV nodes ] Signed-off-by: Jack Steiner LKML-Reference: <20090417142447.GA23759@sgi.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/x2apic_uv_x.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 1248318436e8..49d2f5c739b7 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -34,6 +35,17 @@ DEFINE_PER_CPU(int, x2apic_extra_bits); static enum uv_system_type uv_system_type; +static int early_get_nodeid(void) +{ + union uvh_node_id_u node_id; + unsigned long *mmr; + + mmr = early_ioremap(UV_LOCAL_MMR_BASE | UVH_NODE_ID, sizeof(*mmr)); + node_id.v = *mmr; + early_iounmap(mmr, sizeof(*mmr)); + return node_id.s.node_id; +} + static int uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id) { if (!strcmp(oem_id, "SGI")) { @@ -42,6 +54,8 @@ static int uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id) else if (!strcmp(oem_table_id, "UVX")) uv_system_type = UV_X2APIC; else if (!strcmp(oem_table_id, "UVH")) { + __get_cpu_var(x2apic_extra_bits) = + early_get_nodeid() << (UV_APIC_PNODE_SHIFT - 1); uv_system_type = UV_NON_UNIQUE_APIC; return 1; } -- cgit v1.2.2 From 1648e4f805063137b55b869666e936ffd4419cdf Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Fri, 17 Apr 2009 10:46:37 -0700 Subject: x86, kbuild: make "make install" not depend on vmlinux It is common to use "make install" in restricted environments which differ from the one which was actually used to build the kernel. In such environments it is highly undesirable to trigger a rebuild of any part of the system. Worse, the rebuild may be spurious, triggered by differences in the environment. Signed-off-by: H. Peter Anvin Cc: Sam Ravnborg LKML-Reference: <20090415234642.GA28531@uranus.ravnborg.org> --- arch/x86/Makefile | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/Makefile b/arch/x86/Makefile index f05d8c91d9e5..8c86b72afdc2 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -153,7 +153,7 @@ endif boot := arch/x86/boot -BOOT_TARGETS = bzlilo bzdisk fdimage fdimage144 fdimage288 isoimage install +BOOT_TARGETS = bzlilo bzdisk fdimage fdimage144 fdimage288 isoimage PHONY += bzImage $(BOOT_TARGETS) @@ -171,6 +171,10 @@ bzImage: vmlinux $(BOOT_TARGETS): vmlinux $(Q)$(MAKE) $(build)=$(boot) $@ +PHONY += install +install: + $(Q)$(MAKE) $(build)=$(boot) $@ + PHONY += vdso_install vdso_install: $(Q)$(MAKE) $(build)=arch/x86/vdso $@ -- cgit v1.2.2 From a81b6314e0aa480b8ac6dd02779d44cd0bee0a34 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 17 Apr 2009 23:31:20 +0530 Subject: x86: mm/numa_32.c calculate_numa_remap_pages should use __init calculate_numa_remap_pages() is called only by __init initmem_init() further calculate_numa_remap_pages is calling: __init find_e820_area() and __init reserve_early() So calculate_numa_remap_pages() should be __init calculate_numa_remap_pages(). WARNING: arch/x86/built-in.o(.text+0x82ea3): Section mismatch in reference from the function calculate_numa_remap_pages() to the function .init.text:find_e820_area() The function calculate_numa_remap_pages() references the function __init find_e820_area(). This is often because calculate_numa_remap_pages lacks a __init annotation or the annotation of find_e820_area is wrong. WARNING: arch/x86/built-in.o(.text+0x82f5f): Section mismatch in reference from the function calculate_numa_remap_pages() to the function .init.text:reserve_early() The function calculate_numa_remap_pages() references the function __init reserve_early(). This is often because calculate_numa_remap_pages lacks a __init annotation or the annotation of reserve_early is wrong. [ Impact: save memory, address Section mismatch warning ] Signed-off-by: Jaswinder Singh Rajput Cc: Sam Ravnborg LKML-Reference: <1239991281.3153.4.camel@ht.satnam> Signed-off-by: Ingo Molnar --- arch/x86/mm/numa_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c index 3daefa04ace5..d2530062fe00 100644 --- a/arch/x86/mm/numa_32.c +++ b/arch/x86/mm/numa_32.c @@ -257,7 +257,7 @@ void resume_map_numa_kva(pgd_t *pgd_base) } #endif -static unsigned long calculate_numa_remap_pages(void) +static __init unsigned long calculate_numa_remap_pages(void) { int nid; unsigned long size, reserve_pages = 0; -- cgit v1.2.2 From 0300e7f1a525ae4e4ac05344624adf0e5f13ea52 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 17 Apr 2009 08:33:52 -0400 Subject: lockdep, x86: account for irqs enabled in paranoid_exit I hit the check_flags error of lockdep: WARNING: at kernel/lockdep.c:2893 check_flags+0x1a7/0x1d0() [...] hardirqs last enabled at (12567): [] local_bh_enable+0xaa/0x110 hardirqs last disabled at (12569): [] int3+0x16/0x40 softirqs last enabled at (12566): [] lock_sock_nested+0xfb/0x110 softirqs last disabled at (12568): [] tcp_prequeue_process+0x2e/0xa0 The check_flags warning of lockdep tells me that lockdep thought interrupts were disabled, but they were really enabled. The numbers in the above parenthesis show the order of events: 12566: softirqs last enabled: lock_sock_nested 12567: hardirqs last enabled: local_bh_enable 12568: softirqs last disabled: tcp_prequeue_process 12566: hardirqs last disabled: int3 int3 is a breakpoint! Examining this further, I have CONFIG_NET_TCPPROBE enabled which adds break points into the kernel. The paranoid_exit of the return of int3 does not account for enabling interrupts on return to kernel. This code is a bit tricky since it is also used by the nmi handler (when lockdep is off), and we must be careful about the swapgs. We can not call kernel code after the swapgs has been performed. [ Impact: fix lockdep check_flags warning + self-turn-off ] Acked-by: Peter Zijlsta Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- arch/x86/kernel/entry_64.S | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index a331ec38af9e..38946c6e8433 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -1410,7 +1410,10 @@ ENTRY(paranoid_exit) paranoid_swapgs: TRACE_IRQS_IRETQ 0 SWAPGS_UNSAFE_STACK + RESTORE_ALL 8 + jmp irq_return paranoid_restore: + TRACE_IRQS_IRETQ 0 RESTORE_ALL 8 jmp irq_return paranoid_userspace: -- cgit v1.2.2 From e91fb9137dd235ab959d7675d0e4104974dad5eb Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 17 Apr 2009 11:37:35 +0200 Subject: [ARM] pxa/palm27x: General fix for Palm27x aSoC driver Firstly, this patch makes the palm27x asoc driver a little more sane. Also, since all affected devices use GPIO95 as AC97_nRESET, this patch sets that properly. Affected are PalmT5, TX and LifeDrive. Signed-off-by: Marek Vasut Signed-off-by: Eric Miao --- arch/arm/mach-pxa/include/mach/palmasoc.h | 7 +------ arch/arm/mach-pxa/palmld.c | 18 +++++++++++++++--- arch/arm/mach-pxa/palmt5.c | 18 +++++++++++++++--- arch/arm/mach-pxa/palmtx.c | 23 ++++++++++++++++++++++- 4 files changed, 53 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/include/mach/palmasoc.h b/arch/arm/mach-pxa/include/mach/palmasoc.h index 6c4b1f7de20a..58afb30d5298 100644 --- a/arch/arm/mach-pxa/include/mach/palmasoc.h +++ b/arch/arm/mach-pxa/include/mach/palmasoc.h @@ -1,13 +1,8 @@ #ifndef _INCLUDE_PALMASOC_H_ #define _INCLUDE_PALMASOC_H_ + struct palm27x_asoc_info { int jack_gpio; }; -#ifdef CONFIG_SND_PXA2XX_SOC_PALM27X -void __init palm27x_asoc_set_pdata(struct palm27x_asoc_info *data); -#else -static inline void palm27x_asoc_set_pdata(struct palm27x_asoc_info *data) {} -#endif - #endif diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index ecf5910e39d7..1cec1806f002 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -477,10 +477,22 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = { /****************************************************************************** * aSoC audio ******************************************************************************/ -static struct palm27x_asoc_info palm27x_asoc_pdata = { +static struct palm27x_asoc_info palmld_asoc_pdata = { .jack_gpio = GPIO_NR_PALMLD_EARPHONE_DETECT, }; +static pxa2xx_audio_ops_t palmld_ac97_pdata = { + .reset_gpio = 95, +}; + +static struct platform_device palmld_asoc = { + .name = "palm27x-asoc", + .id = -1, + .dev = { + .platform_data = &palmld_asoc_pdata, + }, +}; + /****************************************************************************** * Framebuffer ******************************************************************************/ @@ -544,6 +556,7 @@ static struct platform_device *devices[] __initdata = { &palmld_backlight, &palmld_leds, &power_supply, + &palmld_asoc, }; static struct map_desc palmld_io_desc[] __initdata = { @@ -573,11 +586,10 @@ static void __init palmld_init(void) set_pxa_fb_info(&palmld_lcd_screen); pxa_set_mci_info(&palmld_mci_platform_data); - pxa_set_ac97_info(NULL); + pxa_set_ac97_info(&palmld_ac97_pdata); pxa_set_ficp_info(&palmld_ficp_platform_data); pxa_set_keypad_info(&palmld_keypad_platform_data); wm97xx_bat_set_pdata(&wm97xx_batt_pdata); - palm27x_asoc_set_pdata(&palm27x_asoc_pdata); platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index d7f81068c613..30662363907b 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -420,10 +420,22 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = { /****************************************************************************** * aSoC audio ******************************************************************************/ -static struct palm27x_asoc_info palm27x_asoc_pdata = { +static struct palm27x_asoc_info palmt5_asoc_pdata = { .jack_gpio = GPIO_NR_PALMT5_EARPHONE_DETECT, }; +static pxa2xx_audio_ops_t palmt5_ac97_pdata = { + .reset_gpio = 95, +}; + +static struct platform_device palmt5_asoc = { + .name = "palm27x-asoc", + .id = -1, + .dev = { + .platform_data = &palmt5_asoc_pdata, + }, +}; + /****************************************************************************** * Framebuffer ******************************************************************************/ @@ -486,6 +498,7 @@ static struct platform_device *devices[] __initdata = { #endif &palmt5_backlight, &power_supply, + &palmt5_asoc, }; /* setup udc GPIOs initial state */ @@ -504,12 +517,11 @@ static void __init palmt5_init(void) set_pxa_fb_info(&palmt5_lcd_screen); pxa_set_mci_info(&palmt5_mci_platform_data); palmt5_udc_init(); + pxa_set_ac97_info(&palmt5_ac97_pdata); pxa_set_udc_info(&palmt5_udc_info); - pxa_set_ac97_info(NULL); pxa_set_ficp_info(&palmt5_ficp_platform_data); pxa_set_keypad_info(&palmt5_keypad_platform_data); wm97xx_bat_set_pdata(&wm97xx_batt_pdata); - palm27x_asoc_set_pdata(&palm27x_asoc_pdata); platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 14393d0ad8b8..e2d44b1a8a9b 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -40,6 +40,7 @@ #include #include #include +#include #include "generic.h" #include "devices.h" @@ -433,6 +434,25 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = { .batt_name = "main-batt", }; +/****************************************************************************** + * aSoC audio + ******************************************************************************/ +static struct palm27x_asoc_info palmtx_asoc_pdata = { + .jack_gpio = GPIO_NR_PALMTX_EARPHONE_DETECT, +}; + +static pxa2xx_audio_ops_t palmtx_ac97_pdata = { + .reset_gpio = 95, +}; + +static struct platform_device palmtx_asoc = { + .name = "palm27x-asoc", + .id = -1, + .dev = { + .platform_data = &palmtx_asoc_pdata, + }, +}; + /****************************************************************************** * Framebuffer ******************************************************************************/ @@ -495,6 +515,7 @@ static struct platform_device *devices[] __initdata = { #endif &palmtx_backlight, &power_supply, + &palmtx_asoc, }; static struct map_desc palmtx_io_desc[] __initdata = { @@ -529,8 +550,8 @@ static void __init palmtx_init(void) set_pxa_fb_info(&palmtx_lcd_screen); pxa_set_mci_info(&palmtx_mci_platform_data); palmtx_udc_init(); + pxa_set_ac97_info(&palmtx_ac97_pdata); pxa_set_udc_info(&palmtx_udc_info); - pxa_set_ac97_info(NULL); pxa_set_ficp_info(&palmtx_ficp_platform_data); pxa_set_keypad_info(&palmtx_keypad_platform_data); wm97xx_bat_set_pdata(&wm97xx_batt_pdata); -- cgit v1.2.2 From a48dc30da44769ea3f3562c18f54878a9a3e78a1 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 15 Apr 2009 13:56:08 +0200 Subject: [ARM] pxa/pcm990: start external GPIOs immediately after built-in ones As a result of an off-by-1 error pcm990 leaves one unused GPIO number between built-in GPIOs and the pca9536 extender. Fix it. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Eric Miao --- arch/arm/mach-pxa/pcm990-baseboard.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 6112740b4ae9..6c12b5a3132f 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -377,7 +377,7 @@ struct pxacamera_platform_data pcm990_pxacamera_platform_data = { #include static struct pca953x_platform_data pca9536_data = { - .gpio_base = NR_BUILTIN_GPIO + 1, + .gpio_base = NR_BUILTIN_GPIO, }; static int gpio_bus_switch; @@ -405,9 +405,9 @@ static unsigned long pcm990_camera_query_bus_param(struct soc_camera_link *link) int ret; if (!gpio_bus_switch) { - ret = gpio_request(NR_BUILTIN_GPIO + 1, "camera"); + ret = gpio_request(NR_BUILTIN_GPIO, "camera"); if (!ret) { - gpio_bus_switch = NR_BUILTIN_GPIO + 1; + gpio_bus_switch = NR_BUILTIN_GPIO; gpio_direction_output(gpio_bus_switch, 0); } else gpio_bus_switch = -EINVAL; -- cgit v1.2.2 From 093f13e23137b9e5f7629dd5932ceea1419e2b61 Mon Sep 17 00:00:00 2001 From: "Pallipadi, Venkatesh" Date: Wed, 15 Apr 2009 10:37:33 -0700 Subject: x86, acpi_cpufreq: Fix the NULL pointer dereference in get_measured_perf Fix for a regression that was introduced by earlier commit 18b2646fe3babeb40b34a0c1751e0bf5adfdc64c on Mon Apr 6 11:26:08 2009 Regression resulted in the below error happened on systems with software coordination where per_cpu acpi data will not be initiated for secondary CPUs in a P-state domain. On Tue, 2009-04-14 at 23:01 -0700, Zhang, Yanmin wrote: My machine hanged with kernel 2.6.30-rc2 when script read > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor. > > opps happens in get_measured_perf: > > cur.aperf.whole = readin.aperf.whole - > per_cpu(drv_data, cpu)->saved_aperf; > > Because per_cpu(drv_data, cpu)=NULL. > > So function get_measured_perf should check if (per_cpu(drv_data, > cpu)==NULL) > and return 0 if it's NULL. --------------sys log------------------ BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: [] get_measured_perf+0x4a/0xf9 PGD a7dd88067 PUD a7ccf5067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor CPU 0 Modules linked in: video output Pid: 2091, comm: kondemand/0 Not tainted 2.6.30-rc2 #1 MP Server RIP: 0010:[] [] get_measured_perf+0x4a/0xf9 RSP: 0018:ffff880a7d56de20 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000046241a42b6 RCX: ffff88004d219000 RDX: 000000000000b660 RSI: 0000000000000020 RDI: 0000000000000001 RBP: ffff880a7f052000 R08: 00000046241a42b6 R09: ffffffff807639f0 R10: 00000000ffffffea R11: ffffffff802207f4 R12: ffff880a7f052000 R13: ffff88004d20e460 R14: 0000000000ddd5a6 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff88004d200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000020 CR3: 0000000a7f1bf000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kondemand/0 (pid: 2091, threadinfo ffff880a7d56c000, task ffff880a7d4d18c0) Stack: ffff880a7f052078 ffffffff803efd54 00000046241a42b6 000000462ffa9e95 0000000000000001 0000000000000001 00000000ffffffea ffffffff8064f41a 0000000000000012 0000000000000012 ffff880a7f052000 ffffffff80650547 Call Trace: [] ? kobject_get+0x12/0x17 [] ? __cpufreq_driver_getavg+0x42/0x57 [] ? do_dbs_timer+0x147/0x272 [] ? do_dbs_timer+0x0/0x272 [] ? worker_thread+0x15b/0x1f5 [] ? autoremove_wake_function+0x0/0x2e [] ? worker_thread+0x0/0x1f5 [] ? kthread+0x54/0x83 [] ? child_rip+0xa/0x20 [] ? kthread+0x0/0x83 [] ? child_rip+0x0/0x20 Code: 99 a6 03 00 31 c9 85 c0 0f 85 c3 00 00 00 89 df 4c 8b 44 24 10 48 c7 c2 60 b6 00 00 48 8b 0c fd e0 30 a5 80 4c 89 c3 48 8b 04 0a <48> 2b 58 20 48 8b 44 24 18 48 89 1c 24 48 8b 34 0a 48 2b 46 28 RIP [] get_measured_perf+0x4a/0xf9 RSP CR2: 0000000000000020 ---[ end trace 2b8fac9a49e19ad4 ]--- Tested-by: "Zhang, Yanmin" Signed-off-by: Venkatesh Pallipadi Signed-off-by: Len Brown --- arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index ecdb682ab516..dd0bd76d14c0 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -68,11 +68,16 @@ struct acpi_cpufreq_data { unsigned int max_freq; unsigned int resume; unsigned int cpu_feature; - u64 saved_aperf, saved_mperf; }; static DEFINE_PER_CPU(struct acpi_cpufreq_data *, drv_data); +struct acpi_msr_data { + u64 saved_aperf, saved_mperf; +}; + +static DEFINE_PER_CPU(struct acpi_msr_data, msr_data); + DEFINE_TRACE(power_mark); /* acpi_perf_data is a pointer to percpu data. */ @@ -287,11 +292,11 @@ static unsigned int get_measured_perf(struct cpufreq_policy *policy, return 0; cur.aperf.whole = readin.aperf.whole - - per_cpu(drv_data, cpu)->saved_aperf; + per_cpu(msr_data, cpu).saved_aperf; cur.mperf.whole = readin.mperf.whole - - per_cpu(drv_data, cpu)->saved_mperf; - per_cpu(drv_data, cpu)->saved_aperf = readin.aperf.whole; - per_cpu(drv_data, cpu)->saved_mperf = readin.mperf.whole; + per_cpu(msr_data, cpu).saved_mperf; + per_cpu(msr_data, cpu).saved_aperf = readin.aperf.whole; + per_cpu(msr_data, cpu).saved_mperf = readin.mperf.whole; #ifdef __i386__ /* -- cgit v1.2.2 From e0e8c4e512e92bc25c19bd8d4926de17d2f8fbf2 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 17 Apr 2009 16:22:06 +0200 Subject: acpi-cpufreq: Cleanup: Use printk_once Signed-off-by: Thomas Renninger Signed-off-by: Len Brown --- arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index dd0bd76d14c0..4eab747a8966 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -693,13 +693,9 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) /* Check for high latency (>20uS) from buggy BIOSes, like on T42 */ if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE && policy->cpuinfo.transition_latency > 20 * 1000) { - static int print_once; policy->cpuinfo.transition_latency = 20 * 1000; - if (!print_once) { - print_once = 1; - printk(KERN_INFO "Capping off P-state tranision latency" - " at 20 uS\n"); - } + printk_once(KERN_INFO "Capping off P-state tranision" + " latency at 20 uS\n"); } data->max_freq = perf->states[0].core_frequency * 1000; -- cgit v1.2.2 From d91758f5ddb80e91176fa2cf80c88c1633950b3d Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 17 Apr 2009 16:22:07 +0200 Subject: acpi-cpufreq: style-only: add parens to math expression Signed-off-by: Thomas Renninger Signed-off-by: Len Brown --- arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 4eab747a8966..aec3161abede 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -340,7 +340,7 @@ static unsigned int get_measured_perf(struct cpufreq_policy *policy, #endif - retval = per_cpu(drv_data, policy->cpu)->max_freq * perf_percent / 100; + retval = (per_cpu(drv_data, policy->cpu)->max_freq * perf_percent) / 100; return retval; } -- cgit v1.2.2 From d876dfbbf5c8728102fb4f683450fa9ae3259cda Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 17 Apr 2009 16:22:08 +0200 Subject: acpi-cpufreq: Do not let get_measured perf depend on internal variable Take already available policy->cpuinfo.max_freq and get rid of acpi-cpufreq specific max_freq variable. This implies that P0 is always the highest frequency which should always be true as ACPI spec says: As a result, the zeroth entry describes the highest performance state Signed-off-by: Thomas Renninger Acked-by: Venkatesh Pallipadi Signed-off-by: Len Brown --- arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index aec3161abede..208ecf6643df 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -65,7 +65,6 @@ enum { struct acpi_cpufreq_data { struct acpi_processor_performance *acpi_data; struct cpufreq_frequency_table *freq_table; - unsigned int max_freq; unsigned int resume; unsigned int cpu_feature; }; @@ -340,7 +339,7 @@ static unsigned int get_measured_perf(struct cpufreq_policy *policy, #endif - retval = (per_cpu(drv_data, policy->cpu)->max_freq * perf_percent) / 100; + retval = (policy->cpuinfo.max_freq * perf_percent) / 100; return retval; } @@ -698,7 +697,6 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) " latency at 20 uS\n"); } - data->max_freq = perf->states[0].core_frequency * 1000; /* table init */ for (i = 0; i < perf->state_count; i++) { if (i > 0 && perf->states[i].core_frequency >= @@ -717,6 +715,9 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) if (result) goto err_freqfree; + if (perf->states[0].core_frequency * 1000 != policy->cpuinfo.max_freq) + printk(KERN_WARNING FW_WARN "P-state 0 is not max freq\n"); + switch (perf->control_register.space_id) { case ACPI_ADR_SPACE_SYSTEM_IO: /* Current speed is unknown and not detectable by IO port */ -- cgit v1.2.2 From eb8f3142fa30201426feb7b3f9046fcd730e17d3 Mon Sep 17 00:00:00 2001 From: Mikael Pettersson Date: Sat, 18 Apr 2009 21:26:57 +0100 Subject: [ARM] 5456/1: add sys_preadv and sys_pwritev Kernel 2.6.30-rc1 added sys_preadv and sys_pwritev to most archs but not ARM, resulting in :1421:2: warning: #warning syscall preadv not implemented :1425:2: warning: #warning syscall pwritev not implemented This patch adds sys_preadv and sys_pwritev to ARM. These syscalls simply take five long-sized parameters, so they should have no calling-convention/ABI issues in the kernel. Tested on armv5tel eabi using a preadv/pwritev test program posted on linuxppc-dev earlier this month. It would be nice to get this into the kernel before 2.6.30 final, so that glibc's kernel version feature test for these syscalls doesn't have to special-case ARM. Signed-off-by: Mikael Pettersson Signed-off-by: Russell King --- arch/arm/include/asm/unistd.h | 2 ++ arch/arm/kernel/calls.S | 2 ++ 2 files changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 010618487cf1..94cc58ef61ae 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -387,6 +387,8 @@ #define __NR_dup3 (__NR_SYSCALL_BASE+358) #define __NR_pipe2 (__NR_SYSCALL_BASE+359) #define __NR_inotify_init1 (__NR_SYSCALL_BASE+360) +#define __NR_preadv (__NR_SYSCALL_BASE+361) +#define __NR_pwritev (__NR_SYSCALL_BASE+362) /* * The following SWIs are ARM private. diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 9ca8d13f05f7..1680e9e9c831 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -370,6 +370,8 @@ CALL(sys_dup3) CALL(sys_pipe2) /* 360 */ CALL(sys_inotify_init1) + CALL(sys_preadv) + CALL(sys_pwritev) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted -- cgit v1.2.2 From 4a014a240b5a3c3b167702948a22dbe9e9a150a8 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 20 Apr 2009 03:33:09 +0100 Subject: [ARM] 5457/1: mach-imx gpio buildfix From: David Brownell Fix GPIO-related build error on mach-imx platform: CC drivers/spi/spi_gpio.o In file included from /home/db/kernel/scratch/arch/arm/include/asm/gpio.h:5, from include/linux/gpio.h:7, from drivers/spi/spi_gpio.c:23: arch/arm/mach-imx/include/mach/gpio.h: In function 'imx_gpio_get_value': arch/arm/mach-imx/include/mach/gpio.h:27: error: implicit declaration of function '__REG2' arch/arm/mach-imx/include/mach/gpio.h:27: error: 'IMX_IO_BASE' undeclared (first use in this function) arch/arm/mach-imx/include/mach/gpio.h:27: error: (Each undeclared identifier is reported only once arch/arm/mach-imx/include/mach/gpio.h:27: error: for each function it appears in.) arch/arm/mach-imx/include/mach/gpio.h: In function 'imx_gpio_set_value_inline': arch/arm/mach-imx/include/mach/gpio.h:36: error: 'IMX_IO_BASE' undeclared (first use in this function) arch/arm/mach-imx/include/mach/gpio.h:36: error: lvalue required as left operand of assignment arch/arm/mach-imx/include/mach/gpio.h:38: error: lvalue required as left operand of assignment ... Signed-off-by: David Brownell Signed-off-by: Russell King --- arch/arm/mach-imx/include/mach/gpio.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-imx/include/mach/gpio.h b/arch/arm/mach-imx/include/mach/gpio.h index 502d5aa2c093..6c2942f82922 100644 --- a/arch/arm/mach-imx/include/mach/gpio.h +++ b/arch/arm/mach-imx/include/mach/gpio.h @@ -1,6 +1,7 @@ #ifndef _IMX_GPIO_H #include +#include #include #define IMX_GPIO_ALLOC_MODE_NORMAL 0 -- cgit v1.2.2 From fc61e6636d13eb3a23eb29b4327eeee9de0ef3bc Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Mon, 20 Apr 2009 08:25:31 -0500 Subject: x86/uv: fix for no memory at paddr 0 Fix endcase where the memory at physical address 0 does not really exist AND one of the sockets on blade 0 has no active cpus. The memory that _appears_ to be at physical address 0 is actually memory that located at a different address but has been remapped by the chipset so that it appears to be at physical address 0. When determining the UV pnode, the algorithm for determining the pnode incorrectly used the relocated physical address instead of the actual (global) address. [ Impact: boot failure on partitioned systems ] Signed-off-by: Jack Steiner LKML-Reference: <20090420132530.GA23156@sgi.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/x2apic_uv_x.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index d6712334ce4b..2bda69352976 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -652,6 +652,7 @@ void __init uv_system_init(void) if (uv_node_to_blade[nid] >= 0) continue; paddr = node_start_pfn(nid) << PAGE_SHIFT; + paddr = uv_soc_phys_ram_to_gpa(paddr); pnode = (paddr >> m_val) & pnode_mask; blade = boot_pnode_to_blade(pnode); uv_node_to_blade[nid] = blade; -- cgit v1.2.2 From 8db70d3deee33e661d091b3e317fccc87bf0975d Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 20 Apr 2009 11:33:12 -0600 Subject: powerpc/5200: defconfig updates Signed-off-by: Grant Likely --- arch/powerpc/configs/52xx/cm5200_defconfig | 69 +++++++--- arch/powerpc/configs/52xx/lite5200b_defconfig | 74 +++++++--- arch/powerpc/configs/52xx/motionpro_defconfig | 77 ++++++++--- arch/powerpc/configs/52xx/pcm030_defconfig | 69 +++++++--- arch/powerpc/configs/52xx/tqm5200_defconfig | 76 ++++++++--- arch/powerpc/configs/mpc5200_defconfig | 188 +++++++++++++++++++++----- 6 files changed, 428 insertions(+), 125 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig index 1239c6132b4a..3838b77b8116 100644 --- a/arch/powerpc/configs/52xx/cm5200_defconfig +++ b/arch/powerpc/configs/52xx/cm5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 21:41:58 2009 +# Linux kernel version: 2.6.30-rc2 +# Sat Apr 18 00:47:44 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -94,19 +96,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -115,10 +120,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -126,6 +133,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -133,7 +141,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -154,8 +161,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -163,6 +168,7 @@ CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set # CONFIG_PPC_LITE5200 is not set +# CONFIG_PPC_MEDIA5200 is not set # CONFIG_PPC_MPC5200_BUGFIX is not set # CONFIG_PPC_MPC5200_GPIO is not set # CONFIG_PPC_PMAC is not set @@ -173,6 +179,8 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -232,9 +240,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -275,7 +286,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -331,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -343,7 +354,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -440,7 +450,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -505,10 +514,12 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -537,6 +548,8 @@ CONFIG_LXT_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -555,7 +568,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -657,7 +669,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -786,11 +797,11 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -831,7 +842,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -846,6 +856,7 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -853,6 +864,7 @@ CONFIG_USB_STORAGE=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -863,6 +875,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -884,6 +897,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -941,6 +959,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -953,7 +972,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1024,6 +1042,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1039,11 +1058,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1061,6 +1081,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1089,9 +1112,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1099,17 +1125,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1140,10 +1168,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set @@ -1211,6 +1241,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig index b7b880562906..29b0f34488f5 100644 --- a/arch/powerpc/configs/52xx/lite5200b_defconfig +++ b/arch/powerpc/configs/52xx/lite5200b_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 21:41:14 2009 +# Linux kernel version: 2.6.30-rc2 +# Sat Apr 18 00:48:04 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -55,6 +56,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -95,19 +97,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -117,10 +122,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -128,6 +135,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -140,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -161,8 +168,6 @@ CONFIG_FREEZER=y # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -170,6 +175,7 @@ CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set CONFIG_PPC_LITE5200=y +# CONFIG_PPC_MEDIA5200 is not set # CONFIG_PPC_MPC5200_BUGFIX is not set # CONFIG_PPC_MPC5200_GPIO is not set # CONFIG_PPC_PMAC is not set @@ -180,6 +186,8 @@ CONFIG_PPC_LITE5200=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -241,9 +249,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -272,6 +283,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -294,7 +306,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -350,6 +361,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -362,7 +374,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -412,6 +423,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # @@ -477,9 +489,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -502,6 +516,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -578,6 +593,7 @@ CONFIG_PATA_MPC52xx=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -611,6 +627,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -632,6 +650,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -642,10 +661,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -655,6 +674,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -664,6 +684,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -671,7 +692,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -795,7 +815,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -876,7 +895,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -892,6 +911,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -902,6 +922,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -923,6 +944,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -966,6 +992,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -978,7 +1005,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -994,6 +1020,7 @@ CONFIG_RPCSEC_GSS_KRB5=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1007,11 +1034,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1029,6 +1058,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1057,9 +1089,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1067,17 +1102,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1108,10 +1145,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1180,6 +1219,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig index fb10f22fd0d2..07b6b266ea95 100644 --- a/arch/powerpc/configs/52xx/motionpro_defconfig +++ b/arch/powerpc/configs/52xx/motionpro_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 21:42:29 2009 +# Linux kernel version: 2.6.30-rc2 +# Sat Apr 18 00:48:22 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -94,19 +96,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -115,10 +120,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -126,6 +133,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -133,7 +141,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -154,8 +161,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -163,6 +168,7 @@ CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set # CONFIG_PPC_LITE5200 is not set +# CONFIG_PPC_MEDIA5200 is not set # CONFIG_PPC_MPC5200_BUGFIX is not set # CONFIG_PPC_MPC5200_GPIO is not set # CONFIG_PPC_PMAC is not set @@ -173,6 +179,8 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -233,9 +241,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -276,7 +287,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -332,6 +342,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -344,7 +355,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -441,7 +451,6 @@ CONFIG_MTD_ROM=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -466,6 +475,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # @@ -516,8 +526,10 @@ CONFIG_CHR_DEV_SG=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -528,6 +540,7 @@ CONFIG_PATA_MPC52xx=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -556,6 +569,8 @@ CONFIG_ICPLUS_PHY=y CONFIG_MDIO_BITBANG=y CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -574,7 +589,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -665,7 +679,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -696,6 +709,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -710,11 +724,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set @@ -800,7 +817,9 @@ CONFIG_LEDS_CLASS=y # # LED drivers # +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -810,6 +829,10 @@ CONFIG_LEDS_TRIGGER_TIMER=y # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# # CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -866,8 +889,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -878,6 +902,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -899,6 +924,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -956,6 +986,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -968,7 +999,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1039,6 +1069,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1054,11 +1085,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1076,6 +1108,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1104,9 +1139,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1114,17 +1152,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1155,10 +1195,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set @@ -1226,6 +1268,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig index 00944c09a0ae..afb1a3d1ef0a 100644 --- a/arch/powerpc/configs/52xx/pcm030_defconfig +++ b/arch/powerpc/configs/52xx/pcm030_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 21:41:33 2009 +# Linux kernel version: 2.6.30-rc2 +# Sat Apr 18 00:48:42 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -69,6 +71,7 @@ CONFIG_LOCALVERSION="trunk" CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set @@ -97,18 +100,18 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -117,10 +120,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -129,6 +134,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -141,7 +147,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -162,8 +167,6 @@ CONFIG_DEFAULT_IOSCHED="noop" # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -171,6 +174,7 @@ CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set # CONFIG_PPC_LITE5200 is not set +# CONFIG_PPC_MEDIA5200 is not set # CONFIG_PPC_MPC5200_BUGFIX is not set # CONFIG_PPC_MPC5200_GPIO is not set # CONFIG_PPC_PMAC is not set @@ -181,6 +185,8 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -242,9 +248,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -268,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -290,7 +300,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -340,6 +349,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -352,7 +362,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -451,7 +460,6 @@ CONFIG_MTD_PHYSMAP=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -504,6 +512,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=m # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -580,6 +589,7 @@ CONFIG_PATA_MPC52xx=m # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -613,6 +623,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -636,7 +648,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -702,6 +713,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -767,7 +779,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -889,11 +900,11 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -934,7 +945,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -949,6 +959,7 @@ CONFIG_USB_STORAGE=m # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1007,8 +1018,9 @@ CONFIG_RTC_DRV_PCF8563=m # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1019,6 +1031,7 @@ CONFIG_EXT2_FS=m # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=m +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1039,6 +1052,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1096,6 +1114,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1107,7 +1126,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1162,6 +1180,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1177,11 +1196,11 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1200,13 +1219,25 @@ CONFIG_FRAME_WARN=1024 # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig index 65237ad6f07e..8585c7c12861 100644 --- a/arch/powerpc/configs/52xx/tqm5200_defconfig +++ b/arch/powerpc/configs/52xx/tqm5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 21:42:58 2009 +# Linux kernel version: 2.6.30-rc2 +# Sat Apr 18 00:48:57 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -94,19 +96,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -115,10 +120,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -126,6 +133,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -138,7 +146,6 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -159,8 +166,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -168,6 +173,7 @@ CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set # CONFIG_PPC_LITE5200 is not set +# CONFIG_PPC_MEDIA5200 is not set CONFIG_PPC_MPC5200_BUGFIX=y # CONFIG_PPC_MPC5200_GPIO is not set # CONFIG_PPC_PMAC is not set @@ -178,6 +184,8 @@ CONFIG_PPC_MPC5200_BUGFIX=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -238,9 +246,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -281,7 +292,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -337,6 +347,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -349,7 +360,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -447,7 +457,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -514,8 +523,10 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -527,6 +538,7 @@ CONFIG_PATA_PLATFORM=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -555,6 +567,8 @@ CONFIG_LXT_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -573,7 +587,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -675,7 +688,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -706,6 +718,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -720,11 +733,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set @@ -857,11 +873,11 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -902,7 +918,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -917,6 +932,7 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -976,8 +992,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -988,6 +1005,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1009,6 +1027,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1066,6 +1089,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1078,7 +1102,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1149,6 +1172,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1164,11 +1188,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1186,6 +1211,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1214,9 +1242,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1224,17 +1255,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1265,10 +1298,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1337,6 +1372,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig index af0cd55605d0..aaa4416660e9 100644 --- a/arch/powerpc/configs/mpc5200_defconfig +++ b/arch/powerpc/configs/mpc5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc3 -# Fri Feb 6 09:48:53 2009 +# Linux kernel version: 2.6.30-rc2 +# Mon Apr 20 11:06:25 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -39,6 +40,7 @@ CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -55,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -91,19 +94,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -113,10 +119,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -124,6 +132,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -136,7 +145,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -157,8 +165,6 @@ CONFIG_FREEZER=y # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -166,8 +172,9 @@ CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y CONFIG_PPC_EFIKA=y CONFIG_PPC_LITE5200=y +CONFIG_PPC_MEDIA5200=y CONFIG_PPC_MPC5200_BUGFIX=y -# CONFIG_PPC_MPC5200_GPIO is not set +CONFIG_PPC_MPC5200_GPIO=y # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set @@ -176,7 +183,9 @@ CONFIG_PPC_MPC5200_BUGFIX=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set CONFIG_PPC_NATIVE=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -241,9 +250,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -272,6 +284,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -294,7 +307,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -350,6 +362,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -362,7 +375,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -388,12 +400,9 @@ CONFIG_MTD=y CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_TESTS is not set -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_OF_PARTS is not set +CONFIG_MTD_OF_PARTS=y # CONFIG_MTD_AR7_PARTS is not set # @@ -447,6 +456,8 @@ CONFIG_MTD_PHYSMAP_OF=y # Self-contained MTD device drivers # # CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -465,14 +476,23 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images # -# CONFIG_MTD_UBI is not set +CONFIG_MTD_UBI=m +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y CONFIG_OF_I2C=y +CONFIG_OF_SPI=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -500,12 +520,14 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # # EEPROM support # CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y @@ -564,9 +586,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -589,6 +613,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -666,6 +691,7 @@ CONFIG_PATA_PLATFORM=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -699,6 +725,9 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -722,7 +751,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -802,6 +830,7 @@ CONFIG_DEVKMEM=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y @@ -854,6 +883,7 @@ CONFIG_I2C_ALGOBIT=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_GPIO is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set @@ -883,22 +913,63 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_MPC52xx_PSC=m + +# +# SPI Protocol Masters +# +CONFIG_SPI_SPIDEV=m +# CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -915,10 +986,12 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -929,11 +1002,16 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -952,6 +1030,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set @@ -989,6 +1068,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set @@ -1084,9 +1164,13 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_LTV350QV is not set # CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_GENERIC=y @@ -1127,15 +1211,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y # CONFIG_HID_APPLE is not set CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y # CONFIG_HID_CHICONY is not set CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set # CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MICROSOFT is not set # CONFIG_HID_MONTEREY is not set @@ -1204,11 +1290,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1250,7 +1336,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1265,6 +1350,8 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1317,6 +1404,13 @@ CONFIG_RTC_DRV_DS1307=y # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers @@ -1336,8 +1430,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1348,6 +1443,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1369,6 +1465,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1416,6 +1517,12 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +CONFIG_UBIFS_FS=m +# CONFIG_UBIFS_FS_XATTR is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1426,6 +1533,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1438,7 +1546,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1493,6 +1600,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1500,7 +1608,7 @@ CONFIG_NLS_ISO8859_1=y CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=m # CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y @@ -1508,11 +1616,14 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1530,6 +1641,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1558,9 +1672,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1568,17 +1685,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1609,10 +1728,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1680,8 +1801,9 @@ CONFIG_CRYPTO_DES=y # # Compression # -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=m # # Random Number Generation -- cgit v1.2.2 From 6d25b688ecc488753af3c9e6f6a9a575b863cf37 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Mon, 20 Apr 2009 12:18:43 -0600 Subject: powerpc: Fix of_node_put() exit path in of_irq_map_one() Signed-off-by: Grant Likely --- arch/powerpc/kernel/prom_parse.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c index 8f0856f312da..8362620c9e6f 100644 --- a/arch/powerpc/kernel/prom_parse.c +++ b/arch/powerpc/kernel/prom_parse.c @@ -971,7 +971,7 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq struct device_node *p; const u32 *intspec, *tmp, *addr; u32 intsize, intlen; - int res; + int res = -EINVAL; DBG("of_irq_map_one: dev=%s, index=%d\n", device->full_name, index); @@ -995,21 +995,20 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq /* Get size of interrupt specifier */ tmp = of_get_property(p, "#interrupt-cells", NULL); - if (tmp == NULL) { - of_node_put(p); - return -EINVAL; - } + if (tmp == NULL) + goto out; intsize = *tmp; DBG(" intsize=%d intlen=%d\n", intsize, intlen); /* Check index */ if ((index + 1) * intsize > intlen) - return -EINVAL; + goto out; /* Get new specifier and map it */ res = of_irq_map_raw(p, intspec + index * intsize, intsize, addr, out_irq); +out: of_node_put(p); return res; } -- cgit v1.2.2 From 06c38d5e36b12d040839ff224e805146c0368556 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Thu, 9 Apr 2009 15:24:34 -0700 Subject: x86-64: fix FPU corruption with signals and preemption In 64bit signal delivery path, clear_used_math() was happening before saving the current active FPU state on to the user stack for signal handling. Between clear_used_math() and the state store on to the user stack, potentially we can get a page fault for the user address and can block. Infact, while testing we were hitting the might_fault() in __clear_user() which can do a schedule(). At a later point in time, we will schedule back into this process and resume the save state (using "xsave/fxsave" instruction) which can lead to DNA fault. And as used_math was cleared before, we will reinit the FP state in the DNA fault and continue. This reinit will result in loosing the FPU state of the process. Move clear_used_math() to a point after the FPU state has been stored onto the user stack. This issue is present from a long time (even before the xsave changes and the x86 merge). But it can easily be exposed in 2.6.28.x and 2.6.29.x series because of the __clear_user() in this path, which has an explicit __cond_resched() leading to a context switch with CONFIG_PREEMPT_VOLUNTARY. [ Impact: fix FPU state corruption ] Signed-off-by: Suresh Siddha Cc: [2.6.28.x, 2.6.29.x] Signed-off-by: H. Peter Anvin --- arch/x86/kernel/xsave.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c index 0a5b04aa98f1..c5ee17e8c6d9 100644 --- a/arch/x86/kernel/xsave.c +++ b/arch/x86/kernel/xsave.c @@ -89,7 +89,7 @@ int save_i387_xstate(void __user *buf) if (!used_math()) return 0; - clear_used_math(); /* trigger finit */ + if (task_thread_info(tsk)->status & TS_USEDFPU) { /* * Start with clearing the user buffer. This will present a @@ -114,6 +114,8 @@ int save_i387_xstate(void __user *buf) return -1; } + clear_used_math(); /* trigger finit */ + if (task_thread_info(tsk)->status & TS_XSAVE) { struct _fpstate __user *fx = buf; struct _xstate __user *x = buf; -- cgit v1.2.2 From 2f537a9f8e82f55c241b002c8cfbf34303b45ada Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 21 Apr 2009 16:00:15 +0930 Subject: x86: fix boot crash in NMI watchdog with CONFIG_CPUMASK_OFFSTACK=y and flat APIC fcef8576d8a64fc603e719c97d423f9f6d4e0e8b converted backtrace_mask to a cpumask_var_t, and assumed check_nmi_watchdog was called before nmi_watchdog_tick was ever called. Steven's oops shows I was wrong. This is something of a bandaid: I'm not sure we *should* be calling nmi_watchdog_tick before check_nmi_watchdog. Note that gcc eliminates this test for the CONFIG_CPUMASK_OFFSTACK=n case. [ Impact: fix boot crash in rare configs ] Reported-by: Steven Rostedt Signed-off-by: Rusty Russell LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/nmi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c index d6bd62407152..2ba52f35a88c 100644 --- a/arch/x86/kernel/apic/nmi.c +++ b/arch/x86/kernel/apic/nmi.c @@ -414,7 +414,8 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) touched = 1; } - if (cpumask_test_cpu(cpu, backtrace_mask)) { + /* We can be called before check_nmi_watchdog, hence NULL check. */ + if (backtrace_mask != NULL && cpumask_test_cpu(cpu, backtrace_mask)) { static DEFINE_SPINLOCK(lock); /* Serialise the printks */ spin_lock(&lock); -- cgit v1.2.2 From fcc5c4a2feea3886dc058498b28508b2731720d5 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 21 Apr 2009 16:03:41 +0930 Subject: x86: avoid theoretical spurious NMI backtraces with CONFIG_CPUMASK_OFFSTACK=y In theory (though not shown in practice) alloc_cpumask_var() doesn't zero memory, so CPUs might print an "NMI backtrace for cpu %d" once on boot. (Bug introduced in fcef8576d8a64fc603e719c97d423f9f6d4e0e8b). [ Impact: avoid theoretical syslog noise in rare configs ] Signed-off-by: Rusty Russell Cc: Steven Rostedt LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/nmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c index 2ba52f35a88c..ce4fbfa315a1 100644 --- a/arch/x86/kernel/apic/nmi.c +++ b/arch/x86/kernel/apic/nmi.c @@ -138,7 +138,7 @@ int __init check_nmi_watchdog(void) if (!prev_nmi_count) goto error; - alloc_cpumask_var(&backtrace_mask, GFP_KERNEL); + alloc_cpumask_var(&backtrace_mask, GFP_KERNEL|__GFP_ZERO); printk(KERN_INFO "Testing NMI watchdog ... "); #ifdef CONFIG_SMP -- cgit v1.2.2 From 66ab3a74c5ce737effc2c64391e036b0938b1c36 Mon Sep 17 00:00:00 2001 From: Jesper Nilsson Date: Tue, 21 Apr 2009 11:44:57 +0200 Subject: CRIS: Merge machine dependent boot/compressed and boot/rescue Merge the machine dependent boot directories for v10 and v32. This avoids some code duplication and eases the way for further merging later on. Signed-off-by: Jesper Nilsson --- arch/cris/Makefile | 14 +- arch/cris/arch-v10/boot/.gitignore | 2 - arch/cris/arch-v10/boot/Makefile | 20 -- arch/cris/arch-v10/boot/compressed/Makefile | 27 -- arch/cris/arch-v10/boot/compressed/README | 25 -- arch/cris/arch-v10/boot/compressed/decompress.lds | 30 -- arch/cris/arch-v10/boot/compressed/head.S | 126 ------- arch/cris/arch-v10/boot/compressed/misc.c | 246 -------------- arch/cris/arch-v10/boot/rescue/Makefile | 35 -- arch/cris/arch-v10/boot/rescue/head.S | 360 -------------------- arch/cris/arch-v10/boot/rescue/kimagerescue.S | 143 -------- arch/cris/arch-v10/boot/rescue/rescue.lds | 20 -- arch/cris/arch-v10/boot/rescue/testrescue.S | 24 -- arch/cris/arch-v10/boot/tools/build.c | 287 ---------------- arch/cris/arch-v32/boot/Makefile | 20 -- arch/cris/arch-v32/boot/compressed/Makefile | 26 -- arch/cris/arch-v32/boot/compressed/README | 24 -- arch/cris/arch-v32/boot/compressed/decompress.lds | 30 -- arch/cris/arch-v32/boot/compressed/head.S | 145 -------- arch/cris/arch-v32/boot/compressed/misc.c | 318 ------------------ arch/cris/arch-v32/boot/rescue/Makefile | 26 -- arch/cris/arch-v32/boot/rescue/head.S | 26 -- arch/cris/arch-v32/boot/rescue/rescue.lds | 43 --- arch/cris/boot/.gitignore | 2 + arch/cris/boot/Makefile | 24 ++ arch/cris/boot/compressed/Makefile | 38 +++ arch/cris/boot/compressed/README | 24 ++ arch/cris/boot/compressed/decompress_v10.lds | 30 ++ arch/cris/boot/compressed/decompress_v32.lds | 30 ++ arch/cris/boot/compressed/head_v10.S | 126 +++++++ arch/cris/boot/compressed/head_v32.S | 145 ++++++++ arch/cris/boot/compressed/misc.c | 391 ++++++++++++++++++++++ arch/cris/boot/rescue/Makefile | 47 +++ arch/cris/boot/rescue/head_v10.S | 360 ++++++++++++++++++++ arch/cris/boot/rescue/head_v32.S | 26 ++ arch/cris/boot/rescue/kimagerescue.S | 143 ++++++++ arch/cris/boot/rescue/rescue_v10.lds | 20 ++ arch/cris/boot/rescue/rescue_v32.lds | 43 +++ arch/cris/boot/rescue/testrescue.S | 24 ++ arch/cris/boot/tools/build.c | 287 ++++++++++++++++ 40 files changed, 1767 insertions(+), 2010 deletions(-) delete mode 100644 arch/cris/arch-v10/boot/.gitignore delete mode 100644 arch/cris/arch-v10/boot/Makefile delete mode 100644 arch/cris/arch-v10/boot/compressed/Makefile delete mode 100644 arch/cris/arch-v10/boot/compressed/README delete mode 100644 arch/cris/arch-v10/boot/compressed/decompress.lds delete mode 100644 arch/cris/arch-v10/boot/compressed/head.S delete mode 100644 arch/cris/arch-v10/boot/compressed/misc.c delete mode 100644 arch/cris/arch-v10/boot/rescue/Makefile delete mode 100644 arch/cris/arch-v10/boot/rescue/head.S delete mode 100644 arch/cris/arch-v10/boot/rescue/kimagerescue.S delete mode 100644 arch/cris/arch-v10/boot/rescue/rescue.lds delete mode 100644 arch/cris/arch-v10/boot/rescue/testrescue.S delete mode 100644 arch/cris/arch-v10/boot/tools/build.c delete mode 100644 arch/cris/arch-v32/boot/Makefile delete mode 100644 arch/cris/arch-v32/boot/compressed/Makefile delete mode 100644 arch/cris/arch-v32/boot/compressed/README delete mode 100644 arch/cris/arch-v32/boot/compressed/decompress.lds delete mode 100644 arch/cris/arch-v32/boot/compressed/head.S delete mode 100644 arch/cris/arch-v32/boot/compressed/misc.c delete mode 100644 arch/cris/arch-v32/boot/rescue/Makefile delete mode 100644 arch/cris/arch-v32/boot/rescue/head.S delete mode 100644 arch/cris/arch-v32/boot/rescue/rescue.lds create mode 100644 arch/cris/boot/.gitignore create mode 100644 arch/cris/boot/Makefile create mode 100644 arch/cris/boot/compressed/Makefile create mode 100644 arch/cris/boot/compressed/README create mode 100644 arch/cris/boot/compressed/decompress_v10.lds create mode 100644 arch/cris/boot/compressed/decompress_v32.lds create mode 100644 arch/cris/boot/compressed/head_v10.S create mode 100644 arch/cris/boot/compressed/head_v32.S create mode 100644 arch/cris/boot/compressed/misc.c create mode 100644 arch/cris/boot/rescue/Makefile create mode 100644 arch/cris/boot/rescue/head_v10.S create mode 100644 arch/cris/boot/rescue/head_v32.S create mode 100644 arch/cris/boot/rescue/kimagerescue.S create mode 100644 arch/cris/boot/rescue/rescue_v10.lds create mode 100644 arch/cris/boot/rescue/rescue_v32.lds create mode 100644 arch/cris/boot/rescue/testrescue.S create mode 100644 arch/cris/boot/tools/build.c (limited to 'arch') diff --git a/arch/cris/Makefile b/arch/cris/Makefile index 3662cfb7b61d..71e17d3eeddb 100644 --- a/arch/cris/Makefile +++ b/arch/cris/Makefile @@ -70,7 +70,7 @@ SRC_ARCH = $(srctree)/arch/cris # cris object files path OBJ_ARCH = $(objtree)/arch/cris -boot := arch/cris/$(SARCH)/boot +boot := arch/cris/boot MACHINE := arch/cris/$(SARCH) all: zImage @@ -81,15 +81,15 @@ zImage Image: vmlinux archprepare: archclean: - $(Q)if [ -e arch/cris/$(SARCH)/boot ]; then \ - $(MAKE) $(clean)=arch/cris/$(SARCH)/boot; \ + $(Q)if [ -e arch/cris/boot ]; then \ + $(MAKE) $(clean)=arch/cris/boot; \ fi CLEAN_FILES += \ - $(MACHINE)/boot/zImage \ - $(MACHINE)/boot/compressed/decompress.bin \ - $(MACHINE)/boot/compressed/piggy.gz \ - $(MACHINE)/boot/rescue/rescue.bin + $(boot)/zImage \ + $(boot)/compressed/decompress.bin \ + $(boot)/compressed/piggy.gz \ + $(boot)/rescue/rescue.bin # MRPROPER_FILES += diff --git a/arch/cris/arch-v10/boot/.gitignore b/arch/cris/arch-v10/boot/.gitignore deleted file mode 100644 index 171a0853caf8..000000000000 --- a/arch/cris/arch-v10/boot/.gitignore +++ /dev/null @@ -1,2 +0,0 @@ -Image -zImage diff --git a/arch/cris/arch-v10/boot/Makefile b/arch/cris/arch-v10/boot/Makefile deleted file mode 100644 index 217203014433..000000000000 --- a/arch/cris/arch-v10/boot/Makefile +++ /dev/null @@ -1,20 +0,0 @@ -# -# arch/cris/arch-v10/boot/Makefile -# - -OBJCOPYFLAGS = -O binary --remove-section=.bss - -subdir- := compressed rescue -targets := Image - -$(obj)/Image: vmlinux FORCE - $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' - -$(obj)/compressed/vmlinux: $(obj)/Image FORCE - $(Q)$(MAKE) $(build)=$(obj)/compressed $@ - $(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin - -$(obj)/zImage: $(obj)/compressed/vmlinux - @cp $< $@ - @echo ' Kernel: $@ is ready' diff --git a/arch/cris/arch-v10/boot/compressed/Makefile b/arch/cris/arch-v10/boot/compressed/Makefile deleted file mode 100644 index 6fe0ffaf3be6..000000000000 --- a/arch/cris/arch-v10/boot/compressed/Makefile +++ /dev/null @@ -1,27 +0,0 @@ -# -# arch/cris/arch-v10/boot/compressed/Makefile -# - -asflags-y += $(LINUXINCLUDE) -ccflags-y += -O2 $(LINUXINCLUDE) -ldflags-y += -T $(srctree)/$(src)/decompress.lds -OBJECTS = $(obj)/head.o $(obj)/misc.o -OBJCOPYFLAGS = -O binary --remove-section=.bss - -quiet_cmd_image = BUILD $@ -cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@ - -targets := vmlinux piggy.gz decompress.o decompress.bin - -$(obj)/decompress.o: $(OBJECTS) FORCE - $(call if_changed,ld) - -$(obj)/decompress.bin: $(obj)/decompress.o FORCE - $(call if_changed,objcopy) - -$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE - $(call if_changed,image) - -$(obj)/piggy.gz: $(obj)/../Image FORCE - $(call if_changed,gzip) - diff --git a/arch/cris/arch-v10/boot/compressed/README b/arch/cris/arch-v10/boot/compressed/README deleted file mode 100644 index 48b3db9924b9..000000000000 --- a/arch/cris/arch-v10/boot/compressed/README +++ /dev/null @@ -1,25 +0,0 @@ -Creation of the self-extracting compressed kernel image (vmlinuz) ------------------------------------------------------------------ -$Id: README,v 1.1 2001/12/17 13:59:27 bjornw Exp $ - -This can be slightly confusing because it's a process with many steps. - -The kernel object built by the arch/etrax100/Makefile, vmlinux, is split -by that makefile into text and data binary files, vmlinux.text and -vmlinux.data. - -Those files together with a ROM filesystem can be catted together and -burned into a flash or executed directly at the DRAM origin. - -They can also be catted together and compressed with gzip, which is what -happens in this makefile. Together they make up piggy.img. - -The decompressor is built into the file decompress.o. It is turned into -the binary file decompress.bin, which is catted together with piggy.img -into the file vmlinuz. It can be executed in an arbitrary place in flash. - -Be careful - it assumes some things about free locations in DRAM. It -assumes the DRAM starts at 0x40000000 and that it is at least 8 MB, -so it puts its code at 0x40700000, and initial stack at 0x40800000. - --Bjorn diff --git a/arch/cris/arch-v10/boot/compressed/decompress.lds b/arch/cris/arch-v10/boot/compressed/decompress.lds deleted file mode 100644 index e80f4594d543..000000000000 --- a/arch/cris/arch-v10/boot/compressed/decompress.lds +++ /dev/null @@ -1,30 +0,0 @@ -/* OUTPUT_FORMAT(elf32-us-cris) */ -OUTPUT_FORMAT(elf32-cris) - -MEMORY - { - dram : ORIGIN = 0x40700000, - LENGTH = 0x00100000 - } - -SECTIONS -{ - .text : - { - _stext = . ; - *(.text) - *(.rodata) - *(.rodata.*) - _etext = . ; - } > dram - .data : - { - *(.data) - _edata = . ; - } > dram - .bss : - { - *(.bss) - _end = ALIGN( 0x10 ) ; - } > dram -} diff --git a/arch/cris/arch-v10/boot/compressed/head.S b/arch/cris/arch-v10/boot/compressed/head.S deleted file mode 100644 index 0bb4dcc29254..000000000000 --- a/arch/cris/arch-v10/boot/compressed/head.S +++ /dev/null @@ -1,126 +0,0 @@ -/* - * arch/cris/boot/compressed/head.S - * - * Copyright (C) 1999, 2001 Axis Communications AB - * - * Code that sets up the DRAM registers, calls the - * decompressor to unpack the piggybacked kernel, and jumps. - * - */ - -#define ASSEMBLER_MACROS_ONLY -#include - -#define RAM_INIT_MAGIC 0x56902387 -#define COMMAND_LINE_MAGIC 0x87109563 - - ;; Exported symbols - - .globl input_data - - - .text - - nop - di - -;; We need to initialze DRAM registers before we start using the DRAM - - cmp.d RAM_INIT_MAGIC, $r8 ; Already initialized? - beq dram_init_finished - nop - -#include "../../lib/dram_init.S" - -dram_init_finished: - - ;; Initiate the PA and PB ports - - move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0 - move.b $r0, [R_PORT_PA_DATA] - - move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0 - move.b $r0, [R_PORT_PA_DIR] - - move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0 - move.b $r0, [R_PORT_PB_DATA] - - move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0 - move.b $r0, [R_PORT_PB_DIR] - - ;; Setup the stack to a suitably high address. - ;; We assume 8 MB is the minimum DRAM in an eLinux - ;; product and put the sp at the top for now. - - move.d 0x40800000, $sp - - ;; Figure out where the compressed piggyback image is - ;; in the flash (since we wont try to copy it to DRAM - ;; before unpacking). It is at _edata, but in flash. - ;; Use (_edata - basse) as offset to the current PC. - -basse: move.d $pc, $r5 - and.d 0x7fffffff, $r5 ; strip any non-cache bit - subq 2, $r5 ; compensate for the move.d $pc instr - move.d $r5, $r0 ; save for later - flash address of 'basse' - add.d _edata, $r5 - sub.d basse, $r5 ; $r5 = flash address of '_edata' - - ;; Copy text+data to DRAM - - move.d basse, $r1 ; destination - move.d _edata, $r2 ; end destination -1: move.w [$r0+], $r3 - move.w $r3, [$r1+] - cmp.d $r2, $r1 - bcs 1b - nop - - move.d $r5, [input_data] ; for the decompressor - - - ;; Clear the decompressors BSS (between _edata and _end) - - moveq 0, $r0 - move.d _edata, $r1 - move.d _end, $r2 -1: move.w $r0, [$r1+] - cmp.d $r2, $r1 - bcs 1b - nop - - ;; Save command line magic and address. - move.d _cmd_line_magic, $r12 - move.d $r10, [$r12] - move.d _cmd_line_addr, $r12 - move.d $r11, [$r12] - - ;; Do the decompression and save compressed size in inptr - - jsr decompress_kernel - - ;; Put start address of root partition in $r9 so the kernel can use it - ;; when mounting from flash - - move.d [input_data], $r9 ; flash address of compressed kernel - add.d [inptr], $r9 ; size of compressed kernel - - ;; Restore command line magic and address. - move.d _cmd_line_magic, $r10 - move.d [$r10], $r10 - move.d _cmd_line_addr, $r11 - move.d [$r11], $r11 - - ;; Enter the decompressed kernel - move.d RAM_INIT_MAGIC, $r8 ; Tell kernel that DRAM is initialized - jump 0x40004000 ; kernel is linked to this address - - .data - -input_data: - .dword 0 ; used by the decompressor -_cmd_line_magic: - .dword 0 -_cmd_line_addr: - .dword 0 -#include "../../lib/hw_settings.S" diff --git a/arch/cris/arch-v10/boot/compressed/misc.c b/arch/cris/arch-v10/boot/compressed/misc.c deleted file mode 100644 index a4db1507d3b1..000000000000 --- a/arch/cris/arch-v10/boot/compressed/misc.c +++ /dev/null @@ -1,246 +0,0 @@ -/* - * misc.c - * - * This is a collection of several routines from gzip-1.0.3 - * adapted for Linux. - * - * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 - * puts by Nick Holloway 1993, better puts by Martin Mares 1995 - * adaptation for Linux/CRIS Axis Communications AB, 1999 - * - */ - -/* where the piggybacked kernel image expects itself to live. - * it is the same address we use when we network load an uncompressed - * image into DRAM, and it is the address the kernel is linked to live - * at by vmlinux.lds.S - */ - -#define KERNEL_LOAD_ADR 0x40004000 - - -#include -#include - -/* - * gzip declarations - */ - -#define OF(args) args -#define STATIC static - -void *memset(void *s, int c, size_t n); -void *memcpy(void *__dest, __const void *__src, size_t __n); - -#define memzero(s, n) memset((s), 0, (n)) - -typedef unsigned char uch; -typedef unsigned short ush; -typedef unsigned long ulg; - -#define WSIZE 0x8000 /* Window size must be at least 32k, */ - /* and a power of two */ - -static uch *inbuf; /* input buffer */ -static uch window[WSIZE]; /* Sliding window buffer */ - -unsigned inptr = 0; /* index of next byte to be processed in inbuf - * After decompression it will contain the - * compressed size, and head.S will read it. - */ - -static unsigned outcnt = 0; /* bytes in output buffer */ - -/* gzip flag byte */ -#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */ -#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ -#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ -#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ -#define COMMENT 0x10 /* bit 4 set: file comment present */ -#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ -#define RESERVED 0xC0 /* bit 6,7: reserved */ - -#define get_byte() (inbuf[inptr++]) - -/* Diagnostic functions */ -#ifdef DEBUG -# define Assert(cond, msg) do { \ - if (!(cond)) \ - error(msg); \ - } while (0) -# define Trace(x) fprintf x -# define Tracev(x) do { \ - if (verbose) \ - fprintf x; \ - } while (0) -# define Tracevv(x) do { \ - if (verbose > 1) \ - fprintf x; \ - } while (0) -# define Tracec(c, x) do { \ - if (verbose && (c)) \ - fprintf x; \ - } while (0) -# define Tracecv(c, x) do { \ - if (verbose > 1 && (c)) \ - fprintf x; \ - } while (0) -#else -# define Assert(cond, msg) -# define Trace(x) -# define Tracev(x) -# define Tracevv(x) -# define Tracec(c, x) -# define Tracecv(c, x) -#endif - -static void flush_window(void); -static void error(char *m); - -extern char *input_data; /* lives in head.S */ - -static long bytes_out = 0; -static uch *output_data; -static unsigned long output_ptr = 0; -static void puts(const char *); - -/* the "heap" is put directly after the BSS ends, at end */ - -extern int _end; -static long free_mem_ptr = (long)&_end; -static long free_mem_end_ptr; - -#include "../../../../../lib/inflate.c" - -/* decompressor info and error messages to serial console */ - -static void -puts(const char *s) -{ -#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL - while (*s) { -#ifdef CONFIG_ETRAX_DEBUG_PORT0 - while (!(*R_SERIAL0_STATUS & (1 << 5))) ; - *R_SERIAL0_TR_DATA = *s++; -#endif -#ifdef CONFIG_ETRAX_DEBUG_PORT1 - while (!(*R_SERIAL1_STATUS & (1 << 5))) ; - *R_SERIAL1_TR_DATA = *s++; -#endif -#ifdef CONFIG_ETRAX_DEBUG_PORT2 - while (!(*R_SERIAL2_STATUS & (1 << 5))) ; - *R_SERIAL2_TR_DATA = *s++; -#endif -#ifdef CONFIG_ETRAX_DEBUG_PORT3 - while (!(*R_SERIAL3_STATUS & (1 << 5))) ; - *R_SERIAL3_TR_DATA = *s++; -#endif - } -#endif -} - -void *memset(void *s, int c, size_t n) -{ - int i; - char *ss = (char *)s; - - for (i = 0; i < n; i++) - ss[i] = c; - - return s; -} - -void *memcpy(void *__dest, __const void *__src, size_t __n) -{ - int i; - char *d = (char *)__dest, *s = (char *)__src; - - for (i = 0; i < __n; i++) - d[i] = s[i]; - - return __dest; -} - -/* =========================================================================== - * Write the output window window[0..outcnt-1] and update crc and bytes_out. - * (Used for the decompressed data only.) - */ - -static void flush_window(void) -{ - ulg c = crc; /* temporary variable */ - unsigned n; - uch *in, *out, ch; - - in = window; - out = &output_data[output_ptr]; - for (n = 0; n < outcnt; n++) { - ch = *out = *in; - out++; - in++; - c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); - } - crc = c; - bytes_out += (ulg)outcnt; - output_ptr += (ulg)outcnt; - outcnt = 0; -} - -static void error(char *x) -{ - puts("\n\n"); - puts(x); - puts("\n\n -- System halted\n"); - - while (1); /* Halt */ -} - -void setup_normal_output_buffer(void) -{ - output_data = (char *)KERNEL_LOAD_ADR; -} - -void decompress_kernel(void) -{ - char revision; - - /* input_data is set in head.S */ - inbuf = input_data; - -#ifdef CONFIG_ETRAX_DEBUG_PORT0 - *R_SERIAL0_XOFF = 0; - *R_SERIAL0_BAUD = 0x99; - *R_SERIAL0_TR_CTRL = 0x40; -#endif -#ifdef CONFIG_ETRAX_DEBUG_PORT1 - *R_SERIAL1_XOFF = 0; - *R_SERIAL1_BAUD = 0x99; - *R_SERIAL1_TR_CTRL = 0x40; -#endif -#ifdef CONFIG_ETRAX_DEBUG_PORT2 - *R_GEN_CONFIG = 0x08; - *R_SERIAL2_XOFF = 0; - *R_SERIAL2_BAUD = 0x99; - *R_SERIAL2_TR_CTRL = 0x40; -#endif -#ifdef CONFIG_ETRAX_DEBUG_PORT3 - *R_GEN_CONFIG = 0x100; - *R_SERIAL3_XOFF = 0; - *R_SERIAL3_BAUD = 0x99; - *R_SERIAL3_TR_CTRL = 0x40; -#endif - - setup_normal_output_buffer(); - - makecrc(); - - __asm__ volatile ("move $vr,%0" : "=rm" (revision)); - if (revision < 10) { - puts("You need an ETRAX 100LX to run linux 2.6\n"); - while (1); - } - - puts("Uncompressing Linux...\n"); - gunzip(); - puts("Done. Now booting the kernel.\n"); -} diff --git a/arch/cris/arch-v10/boot/rescue/Makefile b/arch/cris/arch-v10/boot/rescue/Makefile deleted file mode 100644 index 82ab59b968e5..000000000000 --- a/arch/cris/arch-v10/boot/rescue/Makefile +++ /dev/null @@ -1,35 +0,0 @@ -# -# Makefile for rescue (bootstrap) code -# - -ccflags-y += -O2 $(LINUXINCLUDE) -asflags-y += $(LINUXINCLUDE) -ldflags-y += -T $(srctree)/$(src)/rescue.lds -OBJCOPYFLAGS = -O binary --remove-section=.bss -obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o -OBJECT := $(obj)/head.o - -targets := rescue.o rescue.bin - -$(obj)/rescue.o: $(OBJECT) FORCE - $(call if_changed,ld) - -$(obj)/rescue.bin: $(obj)/rescue.o FORCE - $(call if_changed,objcopy) - cp -p $(obj)/rescue.bin $(objtree) - -$(obj)/testrescue.bin: $(obj)/testrescue.o - $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/testrescue.o tr.bin -# Pad it to 784 bytes - dd if=/dev/zero of=tmp2423 bs=1 count=784 - cat tr.bin tmp2423 >testrescue_tmp.bin - dd if=testrescue_tmp.bin of=$(obj)/testrescue.bin bs=1 count=784 - rm tr.bin tmp2423 testrescue_tmp.bin - -$(obj)/kimagerescue.bin: $(obj)/kimagerescue.o - $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/kimagerescue.o ktr.bin -# Pad it to 784 bytes, that's what the rescue loader expects - dd if=/dev/zero of=tmp2423 bs=1 count=784 - cat ktr.bin tmp2423 >kimagerescue_tmp.bin - dd if=kimagerescue_tmp.bin of=$(obj)/kimagerescue.bin bs=1 count=784 - rm ktr.bin tmp2423 kimagerescue_tmp.bin diff --git a/arch/cris/arch-v10/boot/rescue/head.S b/arch/cris/arch-v10/boot/rescue/head.S deleted file mode 100644 index fb503d1eeea4..000000000000 --- a/arch/cris/arch-v10/boot/rescue/head.S +++ /dev/null @@ -1,360 +0,0 @@ -/* - * Rescue code, made to reside at the beginning of the - * flash-memory. when it starts, it checks a partition - * table at the first sector after the rescue sector. - * the partition table was generated by the product builder - * script and contains offsets, lengths, types and checksums - * for each partition that this code should check. - * - * If any of the checksums fail, we assume the flash is so - * corrupt that we cant use it to boot into the ftp flash - * loader, and instead we initialize the serial port to - * receive a flash-loader and new flash image. we dont include - * any flash code here, but just accept a certain amount of - * bytes from the serial port and jump into it. the downloaded - * code is put in the cache. - * - * The partitiontable is designed so that it is transparent to - * code execution - it has a relative branch opcode in the - * beginning that jumps over it. each entry contains extra - * data so we can add stuff later. - * - * Partition table format: - * - * Code transparency: - * - * 2 bytes [opcode 'nop'] - * 2 bytes [opcode 'di'] - * 4 bytes [opcode 'ba ', 8-bit or 16-bit version] - * 2 bytes [opcode 'nop', delay slot] - * - * Table validation (at +10): - * - * 2 bytes [magic/version word for partitiontable - 0xef, 0xbe] - * 2 bytes [length of all entries plus the end marker] - * 4 bytes [checksum for the partitiontable itself] - * - * Entries, each with the following format, last has offset -1: - * - * 4 bytes [offset in bytes, from start of flash] - * 4 bytes [length in bytes of partition] - * 4 bytes [checksum, simple longword sum] - * 2 bytes [partition type] - * 2 bytes [flags, only bit 0 used, ro/rw = 1/0] - * 16 bytes [reserved for future use] - * - * End marker - * - * 4 bytes [-1] - * - * 10 bytes [0, padding] - * - * Bit 0 in flags signifies RW or RO. The rescue code only bothers - * to check the checksum for RO partitions, since the others will - * change their data without updating the checksums. A 1 in bit 0 - * means RO, 0 means RW. That way, it is possible to set a partition - * in RO mode initially, and later mark it as RW, since you can always - * write 0's to the flash. - * - * During the wait for serial input, the status LED will flash so the - * user knows something went wrong. - * - * Copyright (C) 1999-2007 Axis Communications AB - */ - -#ifdef CONFIG_ETRAX_AXISFLASHMAP - -#define ASSEMBLER_MACROS_ONLY -#include - - ;; The partitiontable is looked for at the first sector after the boot - ;; sector. Sector size is 65536 bytes in all flashes we use. - -#define PTABLE_START CONFIG_ETRAX_PTABLE_SECTOR -#define PTABLE_MAGIC 0xbeef - - ;; The normal Etrax100 on-chip boot ROM does serial boot at 0x380000f0. - ;; That is not where we put our downloaded serial boot-code. - ;; The length is enough for downloading code that loads the rest - ;; of itself (after having setup the DRAM etc). - ;; It is the same length as the on-chip ROM loads, so the same - ;; host loader can be used to load a rescued product as well as - ;; one booted through the Etrax serial boot code. - -#define CODE_START 0x40000000 -#define CODE_LENGTH 784 - -#ifdef CONFIG_ETRAX_RESCUE_SER0 -#define SERXOFF R_SERIAL0_XOFF -#define SERBAUD R_SERIAL0_BAUD -#define SERRECC R_SERIAL0_REC_CTRL -#define SERRDAT R_SERIAL0_REC_DATA -#define SERSTAT R_SERIAL0_STATUS -#endif -#ifdef CONFIG_ETRAX_RESCUE_SER1 -#define SERXOFF R_SERIAL1_XOFF -#define SERBAUD R_SERIAL1_BAUD -#define SERRECC R_SERIAL1_REC_CTRL -#define SERRDAT R_SERIAL1_REC_DATA -#define SERSTAT R_SERIAL1_STATUS -#endif -#ifdef CONFIG_ETRAX_RESCUE_SER2 -#define SERXOFF R_SERIAL2_XOFF -#define SERBAUD R_SERIAL2_BAUD -#define SERRECC R_SERIAL2_REC_CTRL -#define SERRDAT R_SERIAL2_REC_DATA -#define SERSTAT R_SERIAL2_STATUS -#endif -#ifdef CONFIG_ETRAX_RESCUE_SER3 -#define SERXOFF R_SERIAL3_XOFF -#define SERBAUD R_SERIAL3_BAUD -#define SERRECC R_SERIAL3_REC_CTRL -#define SERRDAT R_SERIAL3_REC_DATA -#define SERSTAT R_SERIAL3_STATUS -#endif - -#define NOP_DI 0xf025050f -#define RAM_INIT_MAGIC 0x56902387 - - .text - - ;; This is the entry point of the rescue code - ;; 0x80000000 if loaded in flash (as it should be) - ;; Since etrax actually starts at address 2 when booting from flash, we - ;; put a nop (2 bytes) here first so we dont accidentally skip the di - - nop - di - - jump in_cache ; enter cached area instead -in_cache: - - - ;; First put a jump test to give a possibility of upgrading the - ;; rescue code without erasing/reflashing the sector. - ;; We put a longword of -1 here and if it is not -1, we jump using - ;; the value as jump target. Since we can always change 1's to 0's - ;; without erasing the sector, it is possible to add new - ;; code after this and altering the jumptarget in an upgrade. - -jtcd: move.d [jumptarget], $r0 - cmp.d 0xffffffff, $r0 - beq no_newjump - nop - - jump [$r0] - -jumptarget: - .dword 0xffffffff ; can be overwritten later to insert new code - -no_newjump: -#ifdef CONFIG_ETRAX_ETHERNET - ;; Start MII clock to make sure it is running when tranceiver is reset - move.d 0x3, $r0 ; enable = on, phy = mii_clk - move.d $r0, [R_NETWORK_GEN_CONFIG] -#endif - - ;; We need to setup the bus registers before we start using the DRAM -#include "../../lib/dram_init.S" - - ;; we now should go through the checksum-table and check the listed - ;; partitions for errors. - - move.d PTABLE_START, $r3 - move.d [$r3], $r0 - cmp.d NOP_DI, $r0 ; make sure the nop/di is there... - bne do_rescue - nop - - ;; skip the code transparency block (10 bytes). - - addq 10, $r3 - - ;; check for correct magic - - move.w [$r3+], $r0 - cmp.w PTABLE_MAGIC, $r0 - bne do_rescue ; didn't recognize - trig rescue - nop - - ;; check for correct ptable checksum - - movu.w [$r3+], $r2 ; ptable length - move.d $r2, $r8 ; save for later, length of total ptable - addq 28, $r8 ; account for the rest - move.d [$r3+], $r4 ; ptable checksum - move.d $r3, $r1 - jsr checksum ; r1 source, r2 length, returns in r0 - - cmp.d $r0, $r4 - bne do_rescue ; didn't match - trig rescue - nop - - ;; ptable is ok. validate each entry. - - moveq -1, $r7 - -ploop: move.d [$r3+], $r1 ; partition offset (from ptable start) - bne notfirst ; check if it is the partition containing ptable - nop ; yes.. - move.d $r8, $r1 ; for its checksum check, skip the ptable - move.d [$r3+], $r2 ; partition length - sub.d $r8, $r2 ; minus the ptable length - ba bosse - nop -notfirst: - cmp.d -1, $r1 ; the end of the ptable ? - beq flash_ok ; if so, the flash is validated - move.d [$r3+], $r2 ; partition length -bosse: move.d [$r3+], $r5 ; checksum - move.d [$r3+], $r4 ; type and flags - addq 16, $r3 ; skip the reserved bytes - btstq 16, $r4 ; check ro flag - bpl ploop ; rw partition, skip validation - nop - btstq 17, $r4 ; check bootable flag - bpl 1f - nop - move.d $r1, $r7 ; remember boot partition offset -1: - add.d PTABLE_START, $r1 - - jsr checksum ; checksum the partition - - cmp.d $r0, $r5 - beq ploop ; checksums matched, go to next entry - nop - - ;; otherwise fall through to the rescue code. - -do_rescue: - ;; setup port PA and PB default initial directions and data - ;; (so we can flash LEDs, and so that DTR and others are set) - - move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0 - move.b $r0, [R_PORT_PA_DIR] - move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0 - move.b $r0, [R_PORT_PA_DATA] - - move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0 - move.b $r0, [R_PORT_PB_DIR] - move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0 - move.b $r0, [R_PORT_PB_DATA] - - ;; setup the serial port at 115200 baud - - moveq 0, $r0 - move.d $r0, [SERXOFF] - - move.b 0x99, $r0 - move.b $r0, [SERBAUD] ; 115.2kbaud for both transmit and receive - - move.b 0x40, $r0 ; rec enable - move.b $r0, [SERRECC] - - moveq 0, $r1 ; "timer" to clock out a LED red flash - move.d CODE_START, $r3 ; destination counter - movu.w CODE_LENGTH, $r4; length - -wait_ser: - addq 1, $r1 -#ifndef CONFIG_ETRAX_NO_LEDS -#ifdef CONFIG_ETRAX_PA_LEDS - move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r2 -#endif -#ifdef CONFIG_ETRAX_PB_LEDS - move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r2 -#endif - move.d (1 << CONFIG_ETRAX_LED1R) | (1 << CONFIG_ETRAX_LED2R), $r0 - btstq 16, $r1 - bpl 1f - nop - or.d $r0, $r2 ; set bit - ba 2f - nop -1: not $r0 ; clear bit - and.d $r0, $r2 -2: -#ifdef CONFIG_ETRAX_PA_LEDS - move.b $r2, [R_PORT_PA_DATA] -#endif -#ifdef CONFIG_ETRAX_PB_LEDS - move.b $r2, [R_PORT_PB_DATA] -#endif -#ifdef CONFIG_ETRAX_90000000_LEDS - move.b $r2, [0x90000000] -#endif -#endif - - ;; check if we got something on the serial port - - move.b [SERSTAT], $r0 - btstq 0, $r0 ; data_avail - bpl wait_ser - nop - - ;; got something - copy the byte and loop - - move.b [SERRDAT], $r0 - move.b $r0, [$r3+] - - subq 1, $r4 ; decrease length - bne wait_ser - nop - - ;; jump into downloaded code - - move.d RAM_INIT_MAGIC, $r8 ; Tell next product that DRAM is - ; initialized - jump CODE_START - -flash_ok: - ;; check r7, which contains either -1 or the partition to boot from - - cmp.d -1, $r7 - bne 1f - nop - move.d PTABLE_START, $r7; otherwise use the ptable start -1: - move.d RAM_INIT_MAGIC, $r8 ; Tell next product that DRAM is - ; initialized - jump $r7 ; boot! - - - ;; Helper subroutines - - ;; Will checksum by simple addition - ;; r1 - source - ;; r2 - length in bytes - ;; result will be in r0 -checksum: - moveq 0, $r0 - moveq CONFIG_ETRAX_FLASH1_SIZE, $r6 - - ;; If the first physical flash memory is exceeded wrap to the - ;; second one - btstq 26, $r1 ; Are we addressing first flash? - bpl 1f - nop - clear.d $r6 - -1: test.d $r6 ; 0 = no wrapping - beq 2f - nop - lslq 20, $r6 ; Convert MB to bytes - sub.d $r1, $r6 - -2: addu.b [$r1+], $r0 - subq 1, $r6 ; Flash memory left - beq 3f - subq 1, $r2 ; Length left - bne 2b - nop - ret - nop - -3: move.d MEM_CSE1_START, $r1 ; wrap to second flash - ba 2b - nop - -#endif diff --git a/arch/cris/arch-v10/boot/rescue/kimagerescue.S b/arch/cris/arch-v10/boot/rescue/kimagerescue.S deleted file mode 100644 index 6f7b3e61260b..000000000000 --- a/arch/cris/arch-v10/boot/rescue/kimagerescue.S +++ /dev/null @@ -1,143 +0,0 @@ -/* - * Rescue code to be prepended on a kimage and copied to the - * rescue serial port. - * This is called from the rescue code, it will copy received data to - * 4004000 and after a timeout jump to it. - */ - -#define ASSEMBLER_MACROS_ONLY -#include - -#define CODE_START 0x40004000 -#define CODE_LENGTH 784 -#define TIMEOUT_VALUE 1000 - - -#ifdef CONFIG_ETRAX_RESCUE_SER0 -#define SERXOFF R_SERIAL0_XOFF -#define SERBAUD R_SERIAL0_BAUD -#define SERRECC R_SERIAL0_REC_CTRL -#define SERRDAT R_SERIAL0_REC_DATA -#define SERSTAT R_SERIAL0_STATUS -#endif -#ifdef CONFIG_ETRAX_RESCUE_SER1 -#define SERXOFF R_SERIAL1_XOFF -#define SERBAUD R_SERIAL1_BAUD -#define SERRECC R_SERIAL1_REC_CTRL -#define SERRDAT R_SERIAL1_REC_DATA -#define SERSTAT R_SERIAL1_STATUS -#endif -#ifdef CONFIG_ETRAX_RESCUE_SER2 -#define SERXOFF R_SERIAL2_XOFF -#define SERBAUD R_SERIAL2_BAUD -#define SERRECC R_SERIAL2_REC_CTRL -#define SERRDAT R_SERIAL2_REC_DATA -#define SERSTAT R_SERIAL2_STATUS -#endif -#ifdef CONFIG_ETRAX_RESCUE_SER3 -#define SERXOFF R_SERIAL3_XOFF -#define SERBAUD R_SERIAL3_BAUD -#define SERRECC R_SERIAL3_REC_CTRL -#define SERRDAT R_SERIAL3_REC_DATA -#define SERSTAT R_SERIAL3_STATUS -#endif - - .text - ;; This is the entry point of the rescue code - ;; 0x80000000 if loaded in flash (as it should be) - ;; since etrax actually starts at address 2 when booting from flash, we - ;; put a nop (2 bytes) here first so we dont accidentally skip the di - - nop - di -#ifndef CONFIG_SVINTO_SIM - ;; setup port PA and PB default initial directions and data - ;; (so we can flash LEDs, and so that DTR and others are set) - - move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0 - move.b $r0, [R_PORT_PA_DIR] - move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0 - move.b $r0, [R_PORT_PA_DATA] - - move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0 - move.b $r0, [R_PORT_PB_DIR] - move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0 - move.b $r0, [R_PORT_PB_DATA] - - ;; We need to setup the bus registers before we start using the DRAM -#include "../../lib/dram_init.S" - -#endif - ;; Setup the stack to a suitably high address. - ;; We assume 8 MB is the minimum DRAM in an eLinux - ;; product and put the sp at the top for now. - - move.d 0x40800000, $sp - - ;; setup the serial port at 115200 baud - - moveq 0, $r0 - move.d $r0, [SERXOFF] - - move.b 0x99, $r0 - move.b $r0, [SERBAUD] ; 115.2kbaud for both transmit - ; and receive - - move.b 0x40, $r0 ; rec enable - move.b $r0, [SERRECC] - - - moveq 0, $r1 ; "timer" to clock out a LED red flash - move.d CODE_START, $r3 ; destination counter - move.d CODE_LENGTH, $r4 ; length - move.d TIMEOUT_VALUE, $r5 ; "timeout" until jump - -wait_ser: - addq 1, $r1 - subq 1, $r5 ; decrease timeout - beq jump_start ; timed out - nop -#ifndef CONFIG_ETRAX_NO_LEDS -#ifdef CONFIG_ETRAX_PA_LEDS - move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r2 -#endif -#ifdef CONFIG_ETRAX_PB_LEDS - move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r2 -#endif - move.d (1 << CONFIG_ETRAX_LED1R) | (1 << CONFIG_ETRAX_LED2R), $r0 - btstq 16, $r1 - bpl 1f - nop - or.d $r0, $r2 ; set bit - ba 2f - nop -1: not $r0 ; clear bit - and.d $r0, $r2 -2: -#ifdef CONFIG_ETRAX_PA_LEDS - move.b $r2, [R_PORT_PA_DATA] -#endif -#ifdef CONFIG_ETRAX_PB_LEDS - move.b $r2, [R_PORT_PB_DATA] -#endif -#endif - - ;; check if we got something on the serial port - - move.b [SERSTAT], $r0 - btstq 0, $r0 ; data_avail - bpl wait_ser - nop - - ;; got something - copy the byte and loop - - move.b [SERRDAT], $r0 - move.b $r0, [$r3+] - move.d TIMEOUT_VALUE, $r5 ; reset "timeout" - subq 1, $r4 ; decrease length - bne wait_ser - nop -jump_start: - ;; jump into downloaded code - - jump CODE_START diff --git a/arch/cris/arch-v10/boot/rescue/rescue.lds b/arch/cris/arch-v10/boot/rescue/rescue.lds deleted file mode 100644 index 0b52a9490db6..000000000000 --- a/arch/cris/arch-v10/boot/rescue/rescue.lds +++ /dev/null @@ -1,20 +0,0 @@ -MEMORY - { - flash : ORIGIN = 0x00000000, - LENGTH = 0x00100000 - } - -SECTIONS -{ - .text : - { - stext = . ; - *(.text) - etext = . ; - } > flash - .data : - { - *(.data) - edata = . ; - } > flash -} diff --git a/arch/cris/arch-v10/boot/rescue/testrescue.S b/arch/cris/arch-v10/boot/rescue/testrescue.S deleted file mode 100644 index fc7ec674eca5..000000000000 --- a/arch/cris/arch-v10/boot/rescue/testrescue.S +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Simple testcode to download by the rescue block. - * Just lights some LEDs to show it was downloaded correctly. - * - * Copyright (C) 1999 Axis Communications AB - */ - -#define ASSEMBLER_MACROS_ONLY -#include - - .text - - nop - nop - moveq -1, $r2 - move.b $r2, [R_PORT_PA_DIR] - moveq 0, $r2 - move.b $r2, [R_PORT_PA_DATA] - -endless: - nop - ba endless - nop - diff --git a/arch/cris/arch-v10/boot/tools/build.c b/arch/cris/arch-v10/boot/tools/build.c deleted file mode 100644 index c8adef364160..000000000000 --- a/arch/cris/arch-v10/boot/tools/build.c +++ /dev/null @@ -1,287 +0,0 @@ -/* - * linux/tools/build.c - * - * Copyright (C) 1991, 1992 Linus Torvalds - */ - -/* - * This file builds a disk-image from three different files: - * - * - bootsect: exactly 512 bytes of 8086 machine code, loads the rest - * - setup: 8086 machine code, sets up system parm - * - system: 80386 code for actual system - * - * It does some checking that all files are of the correct type, and - * just writes the result to stdout, removing headers and padding to - * the right amount. It also writes some system data to stderr. - */ - -/* - * Changes by tytso to allow root device specification - * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 - * Cross compiling fixes by Gertjan van Wingerde, July 1996 - */ - -#include /* fprintf */ -#include -#include /* contains exit */ -#include /* unistd.h needs this */ -#include -#include -#include /* contains read/write */ -#include -#include - -#define MINIX_HEADER 32 - -#define N_MAGIC_OFFSET 1024 -#ifndef __BFD__ -static int GCC_HEADER = sizeof(struct exec); -#endif - -#ifdef __BIG_KERNEL__ -#define SYS_SIZE 0xffff -#else -#define SYS_SIZE DEF_SYSSIZE -#endif - -#define DEFAULT_MAJOR_ROOT 0 -#define DEFAULT_MINOR_ROOT 0 - -/* max nr of sectors of setup: don't change unless you also change - * bootsect etc */ -#define SETUP_SECTS 4 - -#define STRINGIFY(x) #x - -typedef union { - int i; - long l; - short s[2]; - char b[4]; -} conv; - -long intel_long(long l) -{ - conv t; - - t.b[0] = l & 0xff; l >>= 8; - t.b[1] = l & 0xff; l >>= 8; - t.b[2] = l & 0xff; l >>= 8; - t.b[3] = l & 0xff; l >>= 8; - return t.l; -} - -int intel_int(int i) -{ - conv t; - - t.b[0] = i & 0xff; i >>= 8; - t.b[1] = i & 0xff; i >>= 8; - t.b[2] = i & 0xff; i >>= 8; - t.b[3] = i & 0xff; i >>= 8; - return t.i; -} - -short intel_short(short l) -{ - conv t; - - t.b[0] = l & 0xff; l >>= 8; - t.b[1] = l & 0xff; l >>= 8; - return t.s[0]; -} - -void die(const char * str) -{ - fprintf(stderr,"%s\n",str); - exit(1); -} - -void usage(void) -{ - die("Usage: build bootsect setup system [rootdev] [> image]"); -} - -int main(int argc, char ** argv) -{ - int i,c,id,sz,tmp_int; - unsigned long sys_size, tmp_long; - char buf[1024]; -#ifndef __BFD__ - struct exec *ex = (struct exec *)buf; -#endif - char major_root, minor_root; - struct stat sb; - unsigned char setup_sectors; - - if ((argc < 4) || (argc > 5)) - usage(); - if (argc > 4) { - if (!strcmp(argv[4], "CURRENT")) { - if (stat("/", &sb)) { - perror("/"); - die("Couldn't stat /"); - } - major_root = major(sb.st_dev); - minor_root = minor(sb.st_dev); - } else if (strcmp(argv[4], "FLOPPY")) { - if (stat(argv[4], &sb)) { - perror(argv[4]); - die("Couldn't stat root device."); - } - major_root = major(sb.st_rdev); - minor_root = minor(sb.st_rdev); - } else { - major_root = 0; - minor_root = 0; - } - } else { - major_root = DEFAULT_MAJOR_ROOT; - minor_root = DEFAULT_MINOR_ROOT; - } - fprintf(stderr, "Root device is (%d, %d)\n", major_root, minor_root); - for (i=0;i0 ; i+=c ) -#ifdef __BIG_KERNEL__ - { - if (!i) { - /* Working with memcpy because of alignment constraints - on Sparc - Gertjan */ - memcpy(&tmp_long, &buf[2], sizeof(long)); - if (tmp_long != intel_long(0x53726448) ) - die("Wrong magic in loader header of 'setup'"); - memcpy(&tmp_int, &buf[6], sizeof(int)); - if (tmp_int < intel_int(0x200)) - die("Wrong version of loader header of 'setup'"); - buf[0x11] = 1; /* LOADED_HIGH */ - tmp_long = intel_long(0x100000); - memcpy(&buf[0x14], &tmp_long, sizeof(long)); /* code32_start */ - } -#endif - if (write(1,buf,c)!=c) - die("Write call failed"); -#ifdef __BIG_KERNEL__ - } -#endif - if (c != 0) - die("read-error on 'setup'"); - close (id); - setup_sectors = (unsigned char)((i + 511) / 512); - /* for compatibility with LILO */ - if (setup_sectors < SETUP_SECTS) - setup_sectors = SETUP_SECTS; - fprintf(stderr,"Setup is %d bytes.\n",i); - for (c=0 ; c sizeof(buf)) - c = sizeof(buf); - if (write(1,buf,c) != c) - die("Write call failed"); - i += c; - } - - if ((id=open(argv[3],O_RDONLY,0))<0) - die("Unable to open 'system'"); -#ifndef __BFD__ - if (read(id,buf,GCC_HEADER) != GCC_HEADER) - die("Unable to read header of 'system'"); - if (N_MAGIC(*ex) == ZMAGIC) { - GCC_HEADER = N_MAGIC_OFFSET; - lseek(id, GCC_HEADER, SEEK_SET); - } else if (N_MAGIC(*ex) != QMAGIC) - die("Non-GCC header of 'system'"); - fprintf(stderr,"System is %d kB (%d kB code, %d kB data and %d kB bss)\n", - (ex->a_text+ex->a_data+ex->a_bss)/1024, - ex->a_text /1024, - ex->a_data /1024, - ex->a_bss /1024); - sz = N_SYMOFF(*ex) - GCC_HEADER + 4; -#else - if (fstat (id, &sb)) { - perror ("fstat"); - die ("Unable to stat 'system'"); - } - sz = sb.st_size; - fprintf (stderr, "System is %d kB\n", sz/1024); -#endif - sys_size = (sz + 15) / 16; - if (sys_size > SYS_SIZE) - die("System is too big"); - while (sz > 0) { - int l, n; - - l = sz; - if (l > sizeof(buf)) - l = sizeof(buf); - if ((n=read(id, buf, l)) != l) { - if (n == -1) - perror(argv[1]); - else - fprintf(stderr, "Unexpected EOF\n"); - die("Can't read 'system'"); - } - if (write(1, buf, l) != l) - die("Write failed"); - sz -= l; - } - close(id); - if (lseek(1, 497, 0) == 497) { - if (write(1, &setup_sectors, 1) != 1) - die("Write of setup sectors failed"); - } - if (lseek(1,500,0) == 500) { - buf[0] = (sys_size & 0xff); - buf[1] = ((sys_size >> 8) & 0xff); - if (write(1, buf, 2) != 2) - die("Write failed"); - } - return(0); -} diff --git a/arch/cris/arch-v32/boot/Makefile b/arch/cris/arch-v32/boot/Makefile deleted file mode 100644 index 99896ad60b30..000000000000 --- a/arch/cris/arch-v32/boot/Makefile +++ /dev/null @@ -1,20 +0,0 @@ -# -# arch/cris/arch-v32/boot/Makefile -# - -OBJCOPYFLAGS = -O binary -R .note -R .comment - -subdir- := compressed rescue -targets := Image - -$(obj)/Image: vmlinux FORCE - $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' - -$(obj)/compressed/vmlinux: $(obj)/Image FORCE - $(Q)$(MAKE) $(build)=$(obj)/compressed $@ - $(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin - -$(obj)/zImage: $(obj)/compressed/vmlinux - @cp $< $@ - @echo ' Kernel: $@ is ready' diff --git a/arch/cris/arch-v32/boot/compressed/Makefile b/arch/cris/arch-v32/boot/compressed/Makefile deleted file mode 100644 index e176b8b69d92..000000000000 --- a/arch/cris/arch-v32/boot/compressed/Makefile +++ /dev/null @@ -1,26 +0,0 @@ -# -# arch/cris/arch-v32/boot/compressed/Makefile -# - -asflags-y += -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch -ccflags-y += -O2 -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch -ldflags-y += -T$(srctree)/$(src)/decompress.lds -OBJECTS = $(obj)/head.o $(obj)/misc.o -OBJCOPYFLAGS = -O binary --remove-section=.bss - -quiet_cmd_image = BUILD $@ -cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@ - -targets := vmlinux piggy.gz decompress.o decompress.bin - -$(obj)/decompress.o: $(OBJECTS) FORCE - $(call if_changed,ld) - -$(obj)/decompress.bin: $(obj)/decompress.o FORCE - $(call if_changed,objcopy) - -$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE - $(call if_changed,image) - -$(obj)/piggy.gz: $(obj)/../Image FORCE - $(call if_changed,gzip) diff --git a/arch/cris/arch-v32/boot/compressed/README b/arch/cris/arch-v32/boot/compressed/README deleted file mode 100644 index 182c5d75784b..000000000000 --- a/arch/cris/arch-v32/boot/compressed/README +++ /dev/null @@ -1,24 +0,0 @@ -Creation of the self-extracting compressed kernel image (vmlinuz) ------------------------------------------------------------------ - -This can be slightly confusing because it's a process with many steps. - -The kernel object built by the arch/etrax100/Makefile, vmlinux, is split -by that makefile into text and data binary files, vmlinux.text and -vmlinux.data. - -Those files together with a ROM filesystem can be catted together and -burned into a flash or executed directly at the DRAM origin. - -They can also be catted together and compressed with gzip, which is what -happens in this makefile. Together they make up piggy.img. - -The decompressor is built into the file decompress.o. It is turned into -the binary file decompress.bin, which is catted together with piggy.img -into the file vmlinuz. It can be executed in an arbitrary place in flash. - -Be careful - it assumes some things about free locations in DRAM. It -assumes the DRAM starts at 0x40000000 and that it is at least 8 MB, -so it puts its code at 0x40700000, and initial stack at 0x40800000. - --Bjorn diff --git a/arch/cris/arch-v32/boot/compressed/decompress.lds b/arch/cris/arch-v32/boot/compressed/decompress.lds deleted file mode 100644 index 3c837feca3ac..000000000000 --- a/arch/cris/arch-v32/boot/compressed/decompress.lds +++ /dev/null @@ -1,30 +0,0 @@ -/*#OUTPUT_FORMAT(elf32-us-cris) */ -OUTPUT_ARCH (crisv32) - -MEMORY - { - dram : ORIGIN = 0x40700000, - LENGTH = 0x00100000 - } - -SECTIONS -{ - .text : - { - _stext = . ; - *(.text) - *(.rodata) - *(.rodata.*) - _etext = . ; - } > dram - .data : - { - *(.data) - _edata = . ; - } > dram - .bss : - { - *(.bss) - _end = ALIGN( 0x10 ) ; - } > dram -} diff --git a/arch/cris/arch-v32/boot/compressed/head.S b/arch/cris/arch-v32/boot/compressed/head.S deleted file mode 100644 index a4a65c5c669e..000000000000 --- a/arch/cris/arch-v32/boot/compressed/head.S +++ /dev/null @@ -1,145 +0,0 @@ -/* - * Code that sets up the DRAM registers, calls the - * decompressor to unpack the piggybacked kernel, and jumps. - * - * Copyright (C) 1999 - 2006, Axis Communications AB - */ - -#define ASSEMBLER_MACROS_ONLY -#include -#include - -#define RAM_INIT_MAGIC 0x56902387 -#define COMMAND_LINE_MAGIC 0x87109563 - - ;; Exported symbols - - .globl input_data - - .text -_start: - di - - ;; Start clocks for used blocks. - START_CLOCKS - - ;; Initialize the DRAM registers. - cmp.d RAM_INIT_MAGIC, $r8 ; Already initialized? - beq dram_init_finished - nop - -#if defined CONFIG_ETRAXFS -#include "../../mach-fs/dram_init.S" -#elif defined CONFIG_CRIS_MACH_ARTPEC3 -#include "../../mach-a3/dram_init.S" -#else -#error Only ETRAXFS and ARTPEC-3 supported! -#endif - -dram_init_finished: - - GIO_INIT - ;; Setup the stack to a suitably high address. - ;; We assume 8 MB is the minimum DRAM and put - ;; the SP at the top for now. - - move.d 0x40800000, $sp - - ;; Figure out where the compressed piggyback image is. - ;; It is either in [NOR] flash (we don't want to copy it - ;; to DRAM before unpacking), or copied to DRAM - ;; by the [NAND] flash boot loader. - ;; The piggyback image is at _edata, but relative to where the - ;; image is actually located in memory, not where it is linked - ;; (the decompressor is linked at 0x40700000+ and runs there). - ;; Use (_edata - herami) as offset to the current PC. - -hereami: - lapcq ., $r5 ; get PC - and.d 0x7fffffff, $r5 ; strip any non-cache bit - move.d $r5, $r0 ; source address of 'herami' - add.d _edata, $r5 - sub.d hereami, $r5 ; r5 = flash address of '_edata' - move.d hereami, $r1 ; destination - - ;; Copy text+data to DRAM - - move.d _edata, $r2 ; end destination -1: move.w [$r0+], $r3 ; from herami+ source - move.w $r3, [$r1+] ; to hereami+ destination (linked address) - cmp.d $r2, $r1 ; finish when destination == _edata - bcs 1b - nop - move.d input_data, $r0 ; for the decompressor - move.d $r5, [$r0] ; for the decompressor - - ;; Clear the decompressors BSS (between _edata and _end) - - moveq 0, $r0 - move.d _edata, $r1 - move.d _end, $r2 -1: move.w $r0, [$r1+] - cmp.d $r2, $r1 - bcs 1b - nop - - ;; Save command line magic and address. - move.d _cmd_line_magic, $r0 - move.d $r10, [$r0] - move.d _cmd_line_addr, $r0 - move.d $r11, [$r0] - - ;; Save boot source indicator - move.d _boot_source, $r0 - move.d $r12, [$r0] - - ;; Do the decompression and save compressed size in _inptr - - jsr decompress_kernel - nop - - ;; Restore boot source indicator - move.d _boot_source, $r12 - move.d [$r12], $r12 - - ;; Restore command line magic and address. - move.d _cmd_line_magic, $r10 - move.d [$r10], $r10 - move.d _cmd_line_addr, $r11 - move.d [$r11], $r11 - - ;; Put start address of root partition in r9 so the kernel can use it - ;; when mounting from flash - move.d input_data, $r0 - move.d [$r0], $r9 ; flash address of compressed kernel - move.d inptr, $r0 - add.d [$r0], $r9 ; size of compressed kernel - cmp.d 0x40000000, $r9 ; image in DRAM ? - blo enter_kernel ; no, must be [NOR] flash, jump - nop ; delay slot - and.d 0x001fffff, $r9 ; assume compressed kernel was < 2M - -enter_kernel: - ;; Enter the decompressed kernel - move.d RAM_INIT_MAGIC, $r8 ; Tell kernel that DRAM is initialized - jump 0x40004000 ; kernel is linked to this address - nop - - .data - -input_data: - .dword 0 ; used by the decompressor -_cmd_line_magic: - .dword 0 -_cmd_line_addr: - .dword 0 -_boot_source: - .dword 0 - -#if defined CONFIG_ETRAXFS -#include "../../mach-fs/hw_settings.S" -#elif defined CONFIG_CRIS_MACH_ARTPEC3 -#include "../../mach-a3/hw_settings.S" -#else -#error Only ETRAXFS and ARTPEC-3 supported! -#endif diff --git a/arch/cris/arch-v32/boot/compressed/misc.c b/arch/cris/arch-v32/boot/compressed/misc.c deleted file mode 100644 index 3595e16e82bc..000000000000 --- a/arch/cris/arch-v32/boot/compressed/misc.c +++ /dev/null @@ -1,318 +0,0 @@ -/* - * misc.c - * - * This is a collection of several routines from gzip-1.0.3 - * adapted for Linux. - * - * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 - * puts by Nick Holloway 1993, better puts by Martin Mares 1995 - * adaptation for Linux/CRIS Axis Communications AB, 1999 - * - */ - -/* where the piggybacked kernel image expects itself to live. - * it is the same address we use when we network load an uncompressed - * image into DRAM, and it is the address the kernel is linked to live - * at by vmlinux.lds.S - */ - -#define KERNEL_LOAD_ADR 0x40004000 - - -#include -#include -#include -#include -#include -#ifdef CONFIG_CRIS_MACH_ARTPEC3 -#include -#endif - -/* - * gzip declarations - */ - -#define OF(args) args -#define STATIC static - -void* memset(void* s, int c, size_t n); -void* memcpy(void* __dest, __const void* __src, - size_t __n); - -#define memzero(s, n) memset ((s), 0, (n)) - - -typedef unsigned char uch; -typedef unsigned short ush; -typedef unsigned long ulg; - -#define WSIZE 0x8000 /* Window size must be at least 32k, */ - /* and a power of two */ - -static uch *inbuf; /* input buffer */ -static uch window[WSIZE]; /* Sliding window buffer */ - -unsigned inptr = 0; /* index of next byte to be processed in inbuf - * After decompression it will contain the - * compressed size, and head.S will read it. - */ - -static unsigned outcnt = 0; /* bytes in output buffer */ - -/* gzip flag byte */ -#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */ -#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ -#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ -#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ -#define COMMENT 0x10 /* bit 4 set: file comment present */ -#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ -#define RESERVED 0xC0 /* bit 6,7: reserved */ - -#define get_byte() inbuf[inptr++] - -/* Diagnostic functions */ -#ifdef DEBUG -# define Assert(cond,msg) {if(!(cond)) error(msg);} -# define Trace(x) fprintf x -# define Tracev(x) {if (verbose) fprintf x ;} -# define Tracevv(x) {if (verbose>1) fprintf x ;} -# define Tracec(c,x) {if (verbose && (c)) fprintf x ;} -# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} -#else -# define Assert(cond,msg) -# define Trace(x) -# define Tracev(x) -# define Tracevv(x) -# define Tracec(c,x) -# define Tracecv(c,x) -#endif - -static void flush_window(void); -static void error(char *m); - -extern char *input_data; /* lives in head.S */ - -static long bytes_out; -static uch *output_data; -static unsigned long output_ptr; - -static void error(char *m); - -static void puts(const char *); - -/* the "heap" is put directly after the BSS ends, at end */ - -extern int _end; -static long free_mem_ptr = (long)&_end; -static long free_mem_end_ptr; - -#include "../../../../../lib/inflate.c" - -/* decompressor info and error messages to serial console */ - -static inline void -serout(const char *s, reg_scope_instances regi_ser) -{ - reg_ser_rs_stat_din rs; - reg_ser_rw_dout dout = {.data = *s}; - - do { - rs = REG_RD(ser, regi_ser, rs_stat_din); - } - while (!rs.tr_rdy);/* Wait for transceiver. */ - - REG_WR(ser, regi_ser, rw_dout, dout); -} - -static void -puts(const char *s) -{ -#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL - while (*s) { -#ifdef CONFIG_ETRAX_DEBUG_PORT0 - serout(s, regi_ser0); -#endif -#ifdef CONFIG_ETRAX_DEBUG_PORT1 - serout(s, regi_ser1); -#endif -#ifdef CONFIG_ETRAX_DEBUG_PORT2 - serout(s, regi_ser2); -#endif -#ifdef CONFIG_ETRAX_DEBUG_PORT3 - serout(s, regi_ser3); -#endif - *s++; - } -/* CONFIG_ETRAX_DEBUG_PORT_NULL */ -#endif -} - -void* -memset(void* s, int c, size_t n) -{ - int i; - char *ss = (char*)s; - - for (i=0;i> 8); - } - crc = c; - bytes_out += (ulg)outcnt; - output_ptr += (ulg)outcnt; - outcnt = 0; -} - -static void -error(char *x) -{ - puts("\r\n\n"); - puts(x); - puts("\r\n\n -- System halted\n"); - - while(1); /* Halt */ -} - -void -setup_normal_output_buffer(void) -{ - output_data = (char *)KERNEL_LOAD_ADR; -} - -static inline void -serial_setup(reg_scope_instances regi_ser) -{ - reg_ser_rw_xoff xoff; - reg_ser_rw_tr_ctrl tr_ctrl; - reg_ser_rw_rec_ctrl rec_ctrl; - reg_ser_rw_tr_baud_div tr_baud; - reg_ser_rw_rec_baud_div rec_baud; - - /* Turn off XOFF. */ - xoff = REG_RD(ser, regi_ser, rw_xoff); - - xoff.chr = 0; - xoff.automatic = regk_ser_no; - - REG_WR(ser, regi_ser, rw_xoff, xoff); - - /* Set baudrate and stopbits. */ - tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl); - rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl); - tr_baud = REG_RD(ser, regi_ser, rw_tr_baud_div); - rec_baud = REG_RD(ser, regi_ser, rw_rec_baud_div); - - tr_ctrl.stop_bits = 1; /* 2 stop bits. */ - tr_ctrl.en = 1; /* enable transmitter */ - rec_ctrl.en = 1; /* enabler receiver */ - - /* - * The baudrate setup used to be a bit fishy, but now transmitter and - * receiver are both set to the intended baud rate, 115200. - * The magic value is 29.493 MHz. - */ - tr_ctrl.base_freq = regk_ser_f29_493; - rec_ctrl.base_freq = regk_ser_f29_493; - tr_baud.div = (29493000 / 8) / 115200; - rec_baud.div = (29493000 / 8) / 115200; - - REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl); - REG_WR(ser, regi_ser, rw_tr_baud_div, tr_baud); - REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl); - REG_WR(ser, regi_ser, rw_rec_baud_div, rec_baud); -} - -void -decompress_kernel(void) -{ - char revision; - -#if defined(CONFIG_ETRAX_DEBUG_PORT1) || \ - defined(CONFIG_ETRAX_DEBUG_PORT2) || \ - defined(CONFIG_ETRAX_DEBUG_PORT3) - reg_pinmux_rw_hwprot hwprot; - -#ifdef CONFIG_CRIS_MACH_ARTPEC3 - reg_clkgen_rw_clk_ctrl clk_ctrl; - - /* Enable corresponding clock region when serial 1..3 selected */ - - clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl); - clk_ctrl.sser_ser_dma6_7 = regk_clkgen_yes; - REG_WR(clkgen, regi_clkgen, rw_clk_ctrl, clk_ctrl); -#endif - - /* pinmux setup for ports 1..3 */ - hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot); -#endif - -#ifdef CONFIG_ETRAX_DEBUG_PORT0 - serial_setup(regi_ser0); -#endif -#ifdef CONFIG_ETRAX_DEBUG_PORT1 - hwprot.ser1 = regk_pinmux_yes; - serial_setup(regi_ser1); -#endif -#ifdef CONFIG_ETRAX_DEBUG_PORT2 - hwprot.ser2 = regk_pinmux_yes; - serial_setup(regi_ser2); -#endif -#ifdef CONFIG_ETRAX_DEBUG_PORT3 - hwprot.ser3 = regk_pinmux_yes; - serial_setup(regi_ser3); -#endif -#if defined(CONFIG_ETRAX_DEBUG_PORT1) || \ - defined(CONFIG_ETRAX_DEBUG_PORT2) || \ - defined(CONFIG_ETRAX_DEBUG_PORT3) - REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot); -#endif - - /* input_data is set in head.S */ - inbuf = input_data; - - setup_normal_output_buffer(); - - makecrc(); - - __asm__ volatile ("move $vr,%0" : "=rm" (revision)); - if (revision < 32) - { - puts("You need an ETRAX FS to run Linux 2.6/crisv32.\r\n"); - while(1); - } - - puts("Uncompressing Linux...\r\n"); - gunzip(); - puts("Done. Now booting the kernel.\r\n"); -} diff --git a/arch/cris/arch-v32/boot/rescue/Makefile b/arch/cris/arch-v32/boot/rescue/Makefile deleted file mode 100644 index 566aac663a38..000000000000 --- a/arch/cris/arch-v32/boot/rescue/Makefile +++ /dev/null @@ -1,26 +0,0 @@ -# -# Makefile for rescue (bootstrap) code -# - -CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE) -ccflags-y += -O2 -I $(srctree)/include/asm/arch/mach/ \ - -I $(srctree)/include/asm/arch -asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch -LD = gcc-cris -mlinux -march=v32 -nostdlib -ldflags-y += -T $(srctree)/$(src)/rescue.lds -LDPOSTFLAGS = -lgcc -OBJCOPYFLAGS = -O binary --remove-section=.bss -obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o -OBJECT := $(obj)/head.o - -targets := rescue.o rescue.bin - -quiet_cmd_ldlibgcc = LD $@ -cmd_ldlibgcc = $(LD) $(LDFLAGS) $(filter-out FORCE,$^) $(LDPOSTFLAGS) -o $@ - -$(obj)/rescue.o: $(OBJECTS) FORCE - $(call if_changed,ldlibgcc) - -$(obj)/rescue.bin: $(obj)/rescue.o FORCE - $(call if_changed,objcopy) - cp -p $(obj)/rescue.bin $(objtree) diff --git a/arch/cris/arch-v32/boot/rescue/head.S b/arch/cris/arch-v32/boot/rescue/head.S deleted file mode 100644 index 5f846b7700a3..000000000000 --- a/arch/cris/arch-v32/boot/rescue/head.S +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Just get started by jumping to CONFIG_ETRAX_PTABLE_SECTOR to start - * kernel decompressor. - * - * In practice, this only works for NOR flash (or some convoluted RAM boot) - * and hence is not really useful for Artpec-3, so it's Etrax FS / NOR only. - * - */ - -#include - -#ifdef CONFIG_ETRAX_AXISFLASHMAP - -;; Code - - .text -start: - - ;; Start clocks for used blocks. - START_CLOCKS - - move.d CONFIG_ETRAX_PTABLE_SECTOR, $r10 - jump $r10 ; Jump to decompressor - nop - -#endif diff --git a/arch/cris/arch-v32/boot/rescue/rescue.lds b/arch/cris/arch-v32/boot/rescue/rescue.lds deleted file mode 100644 index 8ac646bc1a2b..000000000000 --- a/arch/cris/arch-v32/boot/rescue/rescue.lds +++ /dev/null @@ -1,43 +0,0 @@ -/*#OUTPUT_FORMAT(elf32-us-cris) */ -OUTPUT_ARCH (crisv32) -/* Now that NAND support has been stripped, this file could be simplified, - * but it doesn't do any harm on the other hand so why bother. */ - -MEMORY - { - bootblk : ORIGIN = 0x38000000, - LENGTH = 0x00004000 - intmem : ORIGIN = 0x38004000, - LENGTH = 0x00005000 - } - -SECTIONS -{ - .text : - { - _stext = . ; - *(.text) - *(.init.text) - *(.rodata) - *(.rodata.*) - _etext = . ; - } > bootblk - .data : - { - *(.data) - _edata = . ; - } > bootblk - .bss : - { - _bss = . ; - *(.bss) - _end = ALIGN( 0x10 ) ; - } > intmem - - /* Get rid of stuff from EXPORT_SYMBOL(foo). */ - /DISCARD/ : - { - *(__ksymtab_strings) - *(__ksymtab) - } -} diff --git a/arch/cris/boot/.gitignore b/arch/cris/boot/.gitignore new file mode 100644 index 000000000000..171a0853caf8 --- /dev/null +++ b/arch/cris/boot/.gitignore @@ -0,0 +1,2 @@ +Image +zImage diff --git a/arch/cris/boot/Makefile b/arch/cris/boot/Makefile new file mode 100644 index 000000000000..144f3afa0119 --- /dev/null +++ b/arch/cris/boot/Makefile @@ -0,0 +1,24 @@ +# +# arch/cris/boot/Makefile +# + +objcopyflags-$(CONFIG_ETRAX_ARCH_V10) += -R .note -R .comment +objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss + +OBJCOPYFLAGS = -O binary $(objcopyflags-y) + + +subdir- := compressed rescue +targets := Image + +$(obj)/Image: vmlinux FORCE + $(call if_changed,objcopy) + @echo ' Kernel: $@ is ready' + +$(obj)/compressed/vmlinux: $(obj)/Image FORCE + $(Q)$(MAKE) $(build)=$(obj)/compressed $@ + $(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin + +$(obj)/zImage: $(obj)/compressed/vmlinux + @cp $< $@ + @echo ' Kernel: $@ is ready' diff --git a/arch/cris/boot/compressed/Makefile b/arch/cris/boot/compressed/Makefile new file mode 100644 index 000000000000..8fe9338c1775 --- /dev/null +++ b/arch/cris/boot/compressed/Makefile @@ -0,0 +1,38 @@ +# +# arch/cris/boot/compressed/Makefile +# + +asflags-y += $(LINUXINCLUDE) +ccflags-y += -O2 $(LINUXINCLUDE) + +# asflags-$(CONFIG_ETRAX_ARCH_V32) += -I$(srctree)/include/asm/mach \ +# -I$(srctree)/include/asm/arch +# ccflags-$(CONFIG_ETRAX_ARCH_V32) += -O2 -I$(srctree)/include/asm/mach +# -I$(srctree)/include/asm/arch + +arch-$(CONFIG_ETRAX_ARCH_V10) = v10 +arch-$(CONFIG_ETRAX_ARCH_V32) = v32 + +ldflags-y += -T $(srctree)/$(src)/decompress_$(arch-y).lds + +OBJECTS-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o +OBJECTS-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o +OBJECTS= $(OBJECTS-y) $(obj)/misc.o +OBJCOPYFLAGS = -O binary --remove-section=.bss + +quiet_cmd_image = BUILD $@ +cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@ + +targets := vmlinux piggy.gz decompress.o decompress.bin + +$(obj)/decompress.o: $(OBJECTS) FORCE + $(call if_changed,ld) + +$(obj)/decompress.bin: $(obj)/decompress.o FORCE + $(call if_changed,objcopy) + +$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE + $(call if_changed,image) + +$(obj)/piggy.gz: $(obj)/../Image FORCE + $(call if_changed,gzip) diff --git a/arch/cris/boot/compressed/README b/arch/cris/boot/compressed/README new file mode 100644 index 000000000000..182c5d75784b --- /dev/null +++ b/arch/cris/boot/compressed/README @@ -0,0 +1,24 @@ +Creation of the self-extracting compressed kernel image (vmlinuz) +----------------------------------------------------------------- + +This can be slightly confusing because it's a process with many steps. + +The kernel object built by the arch/etrax100/Makefile, vmlinux, is split +by that makefile into text and data binary files, vmlinux.text and +vmlinux.data. + +Those files together with a ROM filesystem can be catted together and +burned into a flash or executed directly at the DRAM origin. + +They can also be catted together and compressed with gzip, which is what +happens in this makefile. Together they make up piggy.img. + +The decompressor is built into the file decompress.o. It is turned into +the binary file decompress.bin, which is catted together with piggy.img +into the file vmlinuz. It can be executed in an arbitrary place in flash. + +Be careful - it assumes some things about free locations in DRAM. It +assumes the DRAM starts at 0x40000000 and that it is at least 8 MB, +so it puts its code at 0x40700000, and initial stack at 0x40800000. + +-Bjorn diff --git a/arch/cris/boot/compressed/decompress_v10.lds b/arch/cris/boot/compressed/decompress_v10.lds new file mode 100644 index 000000000000..e80f4594d543 --- /dev/null +++ b/arch/cris/boot/compressed/decompress_v10.lds @@ -0,0 +1,30 @@ +/* OUTPUT_FORMAT(elf32-us-cris) */ +OUTPUT_FORMAT(elf32-cris) + +MEMORY + { + dram : ORIGIN = 0x40700000, + LENGTH = 0x00100000 + } + +SECTIONS +{ + .text : + { + _stext = . ; + *(.text) + *(.rodata) + *(.rodata.*) + _etext = . ; + } > dram + .data : + { + *(.data) + _edata = . ; + } > dram + .bss : + { + *(.bss) + _end = ALIGN( 0x10 ) ; + } > dram +} diff --git a/arch/cris/boot/compressed/decompress_v32.lds b/arch/cris/boot/compressed/decompress_v32.lds new file mode 100644 index 000000000000..3c837feca3ac --- /dev/null +++ b/arch/cris/boot/compressed/decompress_v32.lds @@ -0,0 +1,30 @@ +/*#OUTPUT_FORMAT(elf32-us-cris) */ +OUTPUT_ARCH (crisv32) + +MEMORY + { + dram : ORIGIN = 0x40700000, + LENGTH = 0x00100000 + } + +SECTIONS +{ + .text : + { + _stext = . ; + *(.text) + *(.rodata) + *(.rodata.*) + _etext = . ; + } > dram + .data : + { + *(.data) + _edata = . ; + } > dram + .bss : + { + *(.bss) + _end = ALIGN( 0x10 ) ; + } > dram +} diff --git a/arch/cris/boot/compressed/head_v10.S b/arch/cris/boot/compressed/head_v10.S new file mode 100644 index 000000000000..9edb8ade7e1f --- /dev/null +++ b/arch/cris/boot/compressed/head_v10.S @@ -0,0 +1,126 @@ +/* + * arch/cris/boot/compressed/head.S + * + * Copyright (C) 1999, 2001 Axis Communications AB + * + * Code that sets up the DRAM registers, calls the + * decompressor to unpack the piggybacked kernel, and jumps. + * + */ + +#define ASSEMBLER_MACROS_ONLY +#include + +#define RAM_INIT_MAGIC 0x56902387 +#define COMMAND_LINE_MAGIC 0x87109563 + + ;; Exported symbols + + .globl input_data + + + .text + + nop + di + +;; We need to initialze DRAM registers before we start using the DRAM + + cmp.d RAM_INIT_MAGIC, $r8 ; Already initialized? + beq dram_init_finished + nop + +#include "../../arch-v10/lib/dram_init.S" + +dram_init_finished: + + ;; Initiate the PA and PB ports + + move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0 + move.b $r0, [R_PORT_PA_DATA] + + move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0 + move.b $r0, [R_PORT_PA_DIR] + + move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0 + move.b $r0, [R_PORT_PB_DATA] + + move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0 + move.b $r0, [R_PORT_PB_DIR] + + ;; Setup the stack to a suitably high address. + ;; We assume 8 MB is the minimum DRAM in an eLinux + ;; product and put the sp at the top for now. + + move.d 0x40800000, $sp + + ;; Figure out where the compressed piggyback image is + ;; in the flash (since we wont try to copy it to DRAM + ;; before unpacking). It is at _edata, but in flash. + ;; Use (_edata - basse) as offset to the current PC. + +basse: move.d $pc, $r5 + and.d 0x7fffffff, $r5 ; strip any non-cache bit + subq 2, $r5 ; compensate for the move.d $pc instr + move.d $r5, $r0 ; save for later - flash address of 'basse' + add.d _edata, $r5 + sub.d basse, $r5 ; $r5 = flash address of '_edata' + + ;; Copy text+data to DRAM + + move.d basse, $r1 ; destination + move.d _edata, $r2 ; end destination +1: move.w [$r0+], $r3 + move.w $r3, [$r1+] + cmp.d $r2, $r1 + bcs 1b + nop + + move.d $r5, [input_data] ; for the decompressor + + + ;; Clear the decompressors BSS (between _edata and _end) + + moveq 0, $r0 + move.d _edata, $r1 + move.d _end, $r2 +1: move.w $r0, [$r1+] + cmp.d $r2, $r1 + bcs 1b + nop + + ;; Save command line magic and address. + move.d _cmd_line_magic, $r12 + move.d $r10, [$r12] + move.d _cmd_line_addr, $r12 + move.d $r11, [$r12] + + ;; Do the decompression and save compressed size in inptr + + jsr decompress_kernel + + ;; Put start address of root partition in $r9 so the kernel can use it + ;; when mounting from flash + + move.d [input_data], $r9 ; flash address of compressed kernel + add.d [inptr], $r9 ; size of compressed kernel + + ;; Restore command line magic and address. + move.d _cmd_line_magic, $r10 + move.d [$r10], $r10 + move.d _cmd_line_addr, $r11 + move.d [$r11], $r11 + + ;; Enter the decompressed kernel + move.d RAM_INIT_MAGIC, $r8 ; Tell kernel that DRAM is initialized + jump 0x40004000 ; kernel is linked to this address + + .data + +input_data: + .dword 0 ; used by the decompressor +_cmd_line_magic: + .dword 0 +_cmd_line_addr: + .dword 0 +#include "../../arch-v10/lib/hw_settings.S" diff --git a/arch/cris/boot/compressed/head_v32.S b/arch/cris/boot/compressed/head_v32.S new file mode 100644 index 000000000000..f483005f3d48 --- /dev/null +++ b/arch/cris/boot/compressed/head_v32.S @@ -0,0 +1,145 @@ +/* + * Code that sets up the DRAM registers, calls the + * decompressor to unpack the piggybacked kernel, and jumps. + * + * Copyright (C) 1999 - 2006, Axis Communications AB + */ + +#define ASSEMBLER_MACROS_ONLY +#include +#include + +#define RAM_INIT_MAGIC 0x56902387 +#define COMMAND_LINE_MAGIC 0x87109563 + + ;; Exported symbols + + .globl input_data + + .text +start: + di + + ;; Start clocks for used blocks. + START_CLOCKS + + ;; Initialize the DRAM registers. + cmp.d RAM_INIT_MAGIC, $r8 ; Already initialized? + beq dram_init_finished + nop + +#if defined CONFIG_ETRAXFS +#include "../../arch-v32/mach-fs/dram_init.S" +#elif defined CONFIG_CRIS_MACH_ARTPEC3 +#include "../../arch-v32/mach-a3/dram_init.S" +#else +#error Only ETRAXFS and ARTPEC-3 supported! +#endif + +dram_init_finished: + + GIO_INIT + ;; Setup the stack to a suitably high address. + ;; We assume 8 MB is the minimum DRAM and put + ;; the SP at the top for now. + + move.d 0x40800000, $sp + + ;; Figure out where the compressed piggyback image is. + ;; It is either in [NOR] flash (we don't want to copy it + ;; to DRAM before unpacking), or copied to DRAM + ;; by the [NAND] flash boot loader. + ;; The piggyback image is at _edata, but relative to where the + ;; image is actually located in memory, not where it is linked + ;; (the decompressor is linked at 0x40700000+ and runs there). + ;; Use (_edata - herami) as offset to the current PC. + +hereami: + lapcq ., $r5 ; get PC + and.d 0x7fffffff, $r5 ; strip any non-cache bit + move.d $r5, $r0 ; source address of 'herami' + add.d _edata, $r5 + sub.d hereami, $r5 ; r5 = flash address of '_edata' + move.d hereami, $r1 ; destination + + ;; Copy text+data to DRAM + + move.d _edata, $r2 ; end destination +1: move.w [$r0+], $r3 ; from herami+ source + move.w $r3, [$r1+] ; to hereami+ destination (linked address) + cmp.d $r2, $r1 ; finish when destination == _edata + bcs 1b + nop + move.d input_data, $r0 ; for the decompressor + move.d $r5, [$r0] ; for the decompressor + + ;; Clear the decompressors BSS (between _edata and _end) + + moveq 0, $r0 + move.d _edata, $r1 + move.d _end, $r2 +1: move.w $r0, [$r1+] + cmp.d $r2, $r1 + bcs 1b + nop + + ;; Save command line magic and address. + move.d _cmd_line_magic, $r0 + move.d $r10, [$r0] + move.d _cmd_line_addr, $r0 + move.d $r11, [$r0] + + ;; Save boot source indicator + move.d _boot_source, $r0 + move.d $r12, [$r0] + + ;; Do the decompression and save compressed size in _inptr + + jsr decompress_kernel + nop + + ;; Restore boot source indicator + move.d _boot_source, $r12 + move.d [$r12], $r12 + + ;; Restore command line magic and address. + move.d _cmd_line_magic, $r10 + move.d [$r10], $r10 + move.d _cmd_line_addr, $r11 + move.d [$r11], $r11 + + ;; Put start address of root partition in r9 so the kernel can use it + ;; when mounting from flash + move.d input_data, $r0 + move.d [$r0], $r9 ; flash address of compressed kernel + move.d inptr, $r0 + add.d [$r0], $r9 ; size of compressed kernel + cmp.d 0x40000000, $r9 ; image in DRAM ? + blo enter_kernel ; no, must be [NOR] flash, jump + nop ; delay slot + and.d 0x001fffff, $r9 ; assume compressed kernel was < 2M + +enter_kernel: + ;; Enter the decompressed kernel + move.d RAM_INIT_MAGIC, $r8 ; Tell kernel that DRAM is initialized + jump 0x40004000 ; kernel is linked to this address + nop + + .data + +input_data: + .dword 0 ; used by the decompressor +_cmd_line_magic: + .dword 0 +_cmd_line_addr: + .dword 0 +_boot_source: + .dword 0 + +#if defined CONFIG_ETRAXFS +#include "../../arch-v32/mach-fs/hw_settings.S" +#elif defined CONFIG_CRIS_MACH_ARTPEC3 +#include "../../arch-v32/mach-a3/hw_settings.S" +#else +#error Only ETRAXFS and ARTPEC-3 supported! +#endif diff --git a/arch/cris/boot/compressed/misc.c b/arch/cris/boot/compressed/misc.c new file mode 100644 index 000000000000..47bc190ba6d4 --- /dev/null +++ b/arch/cris/boot/compressed/misc.c @@ -0,0 +1,391 @@ +/* + * misc.c + * + * This is a collection of several routines from gzip-1.0.3 + * adapted for Linux. + * + * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 + * puts by Nick Holloway 1993, better puts by Martin Mares 1995 + * adaptation for Linux/CRIS Axis Communications AB, 1999 + * + */ + +/* where the piggybacked kernel image expects itself to live. + * it is the same address we use when we network load an uncompressed + * image into DRAM, and it is the address the kernel is linked to live + * at by vmlinux.lds.S + */ + +#define KERNEL_LOAD_ADR 0x40004000 + +#include + +#ifdef CONFIG_ETRAX_ARCH_V32 +#include +#include +#include +#include +#ifdef CONFIG_CRIS_MACH_ARTPEC3 +#include +#endif +#else +#include +#endif + +/* + * gzip declarations + */ + +#define OF(args) args +#define STATIC static + +void *memset(void *s, int c, size_t n); +void *memcpy(void *__dest, __const void *__src, size_t __n); + +#define memzero(s, n) memset((s), 0, (n)) + +typedef unsigned char uch; +typedef unsigned short ush; +typedef unsigned long ulg; + +#define WSIZE 0x8000 /* Window size must be at least 32k, */ + /* and a power of two */ + +static uch *inbuf; /* input buffer */ +static uch window[WSIZE]; /* Sliding window buffer */ + +unsigned inptr = 0; /* index of next byte to be processed in inbuf + * After decompression it will contain the + * compressed size, and head.S will read it. + */ + +static unsigned outcnt = 0; /* bytes in output buffer */ + +/* gzip flag byte */ +#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */ +#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ +#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ +#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ +#define COMMENT 0x10 /* bit 4 set: file comment present */ +#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ +#define RESERVED 0xC0 /* bit 6,7: reserved */ + +#define get_byte() (inbuf[inptr++]) + +/* Diagnostic functions */ +#ifdef DEBUG +# define Assert(cond, msg) do { \ + if (!(cond)) \ + error(msg); \ + } while (0) +# define Trace(x) fprintf x +# define Tracev(x) do { \ + if (verbose) \ + fprintf x; \ + } while (0) +# define Tracevv(x) do { \ + if (verbose > 1) \ + fprintf x; \ + } while (0) +# define Tracec(c, x) do { \ + if (verbose && (c)) \ + fprintf x; \ + } while (0) +# define Tracecv(c, x) do { \ + if (verbose > 1 && (c)) \ + fprintf x; \ + } while (0) +#else +# define Assert(cond, msg) +# define Trace(x) +# define Tracev(x) +# define Tracevv(x) +# define Tracec(c, x) +# define Tracecv(c, x) +#endif + +static void flush_window(void); +static void error(char *m); +static void puts(const char *); + +extern char *input_data; /* lives in head.S */ + +static long bytes_out; +static uch *output_data; +static unsigned long output_ptr; + +/* the "heap" is put directly after the BSS ends, at end */ + +extern int _end; +static long free_mem_ptr = (long)&_end; +static long free_mem_end_ptr; + +#include "../../../../../lib/inflate.c" + +/* decompressor info and error messages to serial console */ + +#ifdef CONFIG_ETRAX_ARCH_V32 +static inline void serout(const char *s, reg_scope_instances regi_ser) +{ + reg_ser_rs_stat_din rs; + reg_ser_rw_dout dout = {.data = *s}; + + do { + rs = REG_RD(ser, regi_ser, rs_stat_din); + } + while (!rs.tr_rdy);/* Wait for transceiver. */ + + REG_WR(ser, regi_ser, rw_dout, dout); +} +#endif + +static void puts(const char *s) +{ +#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL + while (*s) { +#ifdef CONFIG_ETRAX_DEBUG_PORT0 +#ifdef CONFIG_ETRAX_ARCH_V32 + serout(s, regi_ser0); +#else + while (!(*R_SERIAL0_STATUS & (1 << 5))) + ; + *R_SERIAL0_TR_DATA = *s++; +#endif +#endif +#ifdef CONFIG_ETRAX_DEBUG_PORT1 +#ifdef CONFIG_ETRAX_ARCH_V32 + serout(s, regi_ser1); +#else + while (!(*R_SERIAL1_STATUS & (1 << 5))) + ; + *R_SERIAL1_TR_DATA = *s++; +#endif +#endif +#ifdef CONFIG_ETRAX_DEBUG_PORT2 +#ifdef CONFIG_ETRAX_ARCH_V32 + serout(s, regi_ser2); +#else + while (!(*R_SERIAL2_STATUS & (1 << 5))) + ; + *R_SERIAL2_TR_DATA = *s++; +#endif +#endif +#ifdef CONFIG_ETRAX_DEBUG_PORT3 +#ifdef CONFIG_ETRAX_ARCH_V32 + serout(s, regi_ser3); +#else + while (!(*R_SERIAL3_STATUS & (1 << 5))) + ; + *R_SERIAL3_TR_DATA = *s++; +#endif +#endif + *s++; + } +/* CONFIG_ETRAX_DEBUG_PORT_NULL */ +#endif +} + +void *memset(void *s, int c, size_t n) +{ + int i; + char *ss = (char*)s; + + for (i=0;i> 8); + } + crc = c; + bytes_out += (ulg)outcnt; + output_ptr += (ulg)outcnt; + outcnt = 0; +} + +static void error(char *x) +{ + puts("\n\n"); + puts(x); + puts("\n\n -- System halted\n"); + + while(1); /* Halt */ +} + +void setup_normal_output_buffer(void) +{ + output_data = (char *)KERNEL_LOAD_ADR; +} + +#ifdef CONFIG_ETRAX_ARCH_V32 +static inline void serial_setup(reg_scope_instances regi_ser) +{ + reg_ser_rw_xoff xoff; + reg_ser_rw_tr_ctrl tr_ctrl; + reg_ser_rw_rec_ctrl rec_ctrl; + reg_ser_rw_tr_baud_div tr_baud; + reg_ser_rw_rec_baud_div rec_baud; + + /* Turn off XOFF. */ + xoff = REG_RD(ser, regi_ser, rw_xoff); + + xoff.chr = 0; + xoff.automatic = regk_ser_no; + + REG_WR(ser, regi_ser, rw_xoff, xoff); + + /* Set baudrate and stopbits. */ + tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl); + rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl); + tr_baud = REG_RD(ser, regi_ser, rw_tr_baud_div); + rec_baud = REG_RD(ser, regi_ser, rw_rec_baud_div); + + tr_ctrl.stop_bits = 1; /* 2 stop bits. */ + tr_ctrl.en = 1; /* enable transmitter */ + rec_ctrl.en = 1; /* enabler receiver */ + + /* + * The baudrate setup used to be a bit fishy, but now transmitter and + * receiver are both set to the intended baud rate, 115200. + * The magic value is 29.493 MHz. + */ + tr_ctrl.base_freq = regk_ser_f29_493; + rec_ctrl.base_freq = regk_ser_f29_493; + tr_baud.div = (29493000 / 8) / 115200; + rec_baud.div = (29493000 / 8) / 115200; + + REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl); + REG_WR(ser, regi_ser, rw_tr_baud_div, tr_baud); + REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl); + REG_WR(ser, regi_ser, rw_rec_baud_div, rec_baud); +} +#endif + +void decompress_kernel(void) +{ + char revision; + char compile_rev; + +#ifdef CONFIG_ETRAX_ARCH_V32 + /* Need at least a CRISv32 to run. */ + compile_rev = 32; +#if defined(CONFIG_ETRAX_DEBUG_PORT1) || \ + defined(CONFIG_ETRAX_DEBUG_PORT2) || \ + defined(CONFIG_ETRAX_DEBUG_PORT3) + reg_pinmux_rw_hwprot hwprot; + +#ifdef CONFIG_CRIS_MACH_ARTPEC3 + reg_clkgen_rw_clk_ctrl clk_ctrl; + + /* Enable corresponding clock region when serial 1..3 selected */ + + clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl); + clk_ctrl.sser_ser_dma6_7 = regk_clkgen_yes; + REG_WR(clkgen, regi_clkgen, rw_clk_ctrl, clk_ctrl); +#endif + + /* pinmux setup for ports 1..3 */ + hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot); +#endif + + +#ifdef CONFIG_ETRAX_DEBUG_PORT0 + serial_setup(regi_ser0); +#endif +#ifdef CONFIG_ETRAX_DEBUG_PORT1 + hwprot.ser1 = regk_pinmux_yes; + serial_setup(regi_ser1); +#endif +#ifdef CONFIG_ETRAX_DEBUG_PORT2 + hwprot.ser2 = regk_pinmux_yes; + serial_setup(regi_ser2); +#endif +#ifdef CONFIG_ETRAX_DEBUG_PORT3 + hwprot.ser3 = regk_pinmux_yes; + serial_setup(regi_ser3); +#endif +#if defined(CONFIG_ETRAX_DEBUG_PORT1) || \ + defined(CONFIG_ETRAX_DEBUG_PORT2) || \ + defined(CONFIG_ETRAX_DEBUG_PORT3) + REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot); +#endif + + /* input_data is set in head.S */ + inbuf = input_data; +#else /* CRISv10 */ + /* Need at least a crisv10 to run. */ + compile_rev = 10; + + /* input_data is set in head.S */ + inbuf = input_data; + +#ifdef CONFIG_ETRAX_DEBUG_PORT0 + *R_SERIAL0_XOFF = 0; + *R_SERIAL0_BAUD = 0x99; + *R_SERIAL0_TR_CTRL = 0x40; +#endif +#ifdef CONFIG_ETRAX_DEBUG_PORT1 + *R_SERIAL1_XOFF = 0; + *R_SERIAL1_BAUD = 0x99; + *R_SERIAL1_TR_CTRL = 0x40; +#endif +#ifdef CONFIG_ETRAX_DEBUG_PORT2 + *R_GEN_CONFIG = 0x08; + *R_SERIAL2_XOFF = 0; + *R_SERIAL2_BAUD = 0x99; + *R_SERIAL2_TR_CTRL = 0x40; +#endif +#ifdef CONFIG_ETRAX_DEBUG_PORT3 + *R_GEN_CONFIG = 0x100; + *R_SERIAL3_XOFF = 0; + *R_SERIAL3_BAUD = 0x99; + *R_SERIAL3_TR_CTRL = 0x40; +#endif +#endif + + setup_normal_output_buffer(); + + makecrc(); + + __asm__ volatile ("move $vr,%0" : "=rm" (revision)); + if (revision < compile_rev) { +#ifdef CONFIG_ETRAX_ARCH_V32 + puts("You need an ETRAX FS to run Linux 2.6/crisv32\n"); +#else + puts("You need an ETRAX 100LX to run linux 2.6\n"); +#endif + while(1); + } + + puts("Uncompressing Linux...\n"); + gunzip(); + puts("Done. Now booting the kernel\n"); +} diff --git a/arch/cris/boot/rescue/Makefile b/arch/cris/boot/rescue/Makefile new file mode 100644 index 000000000000..52bd0bd1dd22 --- /dev/null +++ b/arch/cris/boot/rescue/Makefile @@ -0,0 +1,47 @@ +# +# Makefile for rescue (bootstrap) code +# + +# CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE) +# ccflags-$(CONFIG_ETRAX_ARCH_V32) += -I$(srctree)/include/asm/arch/mach/ \ +# -I$(srctree)/include/asm/arch +# asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch +# LD = gcc-cris -mlinux -march=v32 -nostdlib + +asflags-y += $(LINUXINCLUDE) +ccflags-y += -O2 $(LINUXINCLUDE) +arch-$(CONFIG_ETRAX_ARCH_V10) = v10 +arch-$(CONFIG_ETRAX_ARCH_V32) = v32 + +ldflags-y += -T $(srctree)/$(src)/rescue_$(arch-y).lds +OBJCOPYFLAGS = -O binary --remove-section=.bss +obj-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o +obj-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o +OBJECTS := $(obj-y) + +targets := rescue.o rescue.bin + +$(obj)/rescue.o: $(OBJECTS) FORCE + $(call if_changed,ld) + +$(obj)/rescue.bin: $(obj)/rescue.o FORCE + $(call if_changed,objcopy) + cp -p $(obj)/rescue.bin $(objtree) + +$(obj)/testrescue.bin: $(obj)/testrescue.o + $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/testrescue.o tr.bin +# Pad it to 784 bytes + dd if=/dev/zero of=tmp2423 bs=1 count=784 + cat tr.bin tmp2423 >testrescue_tmp.bin + dd if=testrescue_tmp.bin of=$(obj)/testrescue.bin bs=1 count=784 + rm tr.bin tmp2423 testrescue_tmp.bin + + +$(obj)/kimagerescue.bin: $(obj)/kimagerescue.o + $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/kimagerescue.o ktr.bin +# Pad it to 784 bytes, that's what the rescue loader expects + dd if=/dev/zero of=tmp2423 bs=1 count=784 + cat ktr.bin tmp2423 >kimagerescue_tmp.bin + dd if=kimagerescue_tmp.bin of=$(obj)/kimagerescue.bin bs=1 count=784 + rm ktr.bin tmp2423 kimagerescue_tmp.bin + diff --git a/arch/cris/boot/rescue/head_v10.S b/arch/cris/boot/rescue/head_v10.S new file mode 100644 index 000000000000..2fafe247a25b --- /dev/null +++ b/arch/cris/boot/rescue/head_v10.S @@ -0,0 +1,360 @@ +/* + * Rescue code, made to reside at the beginning of the + * flash-memory. when it starts, it checks a partition + * table at the first sector after the rescue sector. + * the partition table was generated by the product builder + * script and contains offsets, lengths, types and checksums + * for each partition that this code should check. + * + * If any of the checksums fail, we assume the flash is so + * corrupt that we cant use it to boot into the ftp flash + * loader, and instead we initialize the serial port to + * receive a flash-loader and new flash image. we dont include + * any flash code here, but just accept a certain amount of + * bytes from the serial port and jump into it. the downloaded + * code is put in the cache. + * + * The partitiontable is designed so that it is transparent to + * code execution - it has a relative branch opcode in the + * beginning that jumps over it. each entry contains extra + * data so we can add stuff later. + * + * Partition table format: + * + * Code transparency: + * + * 2 bytes [opcode 'nop'] + * 2 bytes [opcode 'di'] + * 4 bytes [opcode 'ba ', 8-bit or 16-bit version] + * 2 bytes [opcode 'nop', delay slot] + * + * Table validation (at +10): + * + * 2 bytes [magic/version word for partitiontable - 0xef, 0xbe] + * 2 bytes [length of all entries plus the end marker] + * 4 bytes [checksum for the partitiontable itself] + * + * Entries, each with the following format, last has offset -1: + * + * 4 bytes [offset in bytes, from start of flash] + * 4 bytes [length in bytes of partition] + * 4 bytes [checksum, simple longword sum] + * 2 bytes [partition type] + * 2 bytes [flags, only bit 0 used, ro/rw = 1/0] + * 16 bytes [reserved for future use] + * + * End marker + * + * 4 bytes [-1] + * + * 10 bytes [0, padding] + * + * Bit 0 in flags signifies RW or RO. The rescue code only bothers + * to check the checksum for RO partitions, since the others will + * change their data without updating the checksums. A 1 in bit 0 + * means RO, 0 means RW. That way, it is possible to set a partition + * in RO mode initially, and later mark it as RW, since you can always + * write 0's to the flash. + * + * During the wait for serial input, the status LED will flash so the + * user knows something went wrong. + * + * Copyright (C) 1999-2007 Axis Communications AB + */ + +#ifdef CONFIG_ETRAX_AXISFLASHMAP + +#define ASSEMBLER_MACROS_ONLY +#include + + ;; The partitiontable is looked for at the first sector after the boot + ;; sector. Sector size is 65536 bytes in all flashes we use. + +#define PTABLE_START CONFIG_ETRAX_PTABLE_SECTOR +#define PTABLE_MAGIC 0xbeef + + ;; The normal Etrax100 on-chip boot ROM does serial boot at 0x380000f0. + ;; That is not where we put our downloaded serial boot-code. + ;; The length is enough for downloading code that loads the rest + ;; of itself (after having setup the DRAM etc). + ;; It is the same length as the on-chip ROM loads, so the same + ;; host loader can be used to load a rescued product as well as + ;; one booted through the Etrax serial boot code. + +#define CODE_START 0x40000000 +#define CODE_LENGTH 784 + +#ifdef CONFIG_ETRAX_RESCUE_SER0 +#define SERXOFF R_SERIAL0_XOFF +#define SERBAUD R_SERIAL0_BAUD +#define SERRECC R_SERIAL0_REC_CTRL +#define SERRDAT R_SERIAL0_REC_DATA +#define SERSTAT R_SERIAL0_STATUS +#endif +#ifdef CONFIG_ETRAX_RESCUE_SER1 +#define SERXOFF R_SERIAL1_XOFF +#define SERBAUD R_SERIAL1_BAUD +#define SERRECC R_SERIAL1_REC_CTRL +#define SERRDAT R_SERIAL1_REC_DATA +#define SERSTAT R_SERIAL1_STATUS +#endif +#ifdef CONFIG_ETRAX_RESCUE_SER2 +#define SERXOFF R_SERIAL2_XOFF +#define SERBAUD R_SERIAL2_BAUD +#define SERRECC R_SERIAL2_REC_CTRL +#define SERRDAT R_SERIAL2_REC_DATA +#define SERSTAT R_SERIAL2_STATUS +#endif +#ifdef CONFIG_ETRAX_RESCUE_SER3 +#define SERXOFF R_SERIAL3_XOFF +#define SERBAUD R_SERIAL3_BAUD +#define SERRECC R_SERIAL3_REC_CTRL +#define SERRDAT R_SERIAL3_REC_DATA +#define SERSTAT R_SERIAL3_STATUS +#endif + +#define NOP_DI 0xf025050f +#define RAM_INIT_MAGIC 0x56902387 + + .text + + ;; This is the entry point of the rescue code + ;; 0x80000000 if loaded in flash (as it should be) + ;; Since etrax actually starts at address 2 when booting from flash, we + ;; put a nop (2 bytes) here first so we dont accidentally skip the di + + nop + di + + jump in_cache ; enter cached area instead +in_cache: + + + ;; First put a jump test to give a possibility of upgrading the + ;; rescue code without erasing/reflashing the sector. + ;; We put a longword of -1 here and if it is not -1, we jump using + ;; the value as jump target. Since we can always change 1's to 0's + ;; without erasing the sector, it is possible to add new + ;; code after this and altering the jumptarget in an upgrade. + +jtcd: move.d [jumptarget], $r0 + cmp.d 0xffffffff, $r0 + beq no_newjump + nop + + jump [$r0] + +jumptarget: + .dword 0xffffffff ; can be overwritten later to insert new code + +no_newjump: +#ifdef CONFIG_ETRAX_ETHERNET + ;; Start MII clock to make sure it is running when tranceiver is reset + move.d 0x3, $r0 ; enable = on, phy = mii_clk + move.d $r0, [R_NETWORK_GEN_CONFIG] +#endif + + ;; We need to setup the bus registers before we start using the DRAM +#include "../../../arch-v10/lib/dram_init.S" + + ;; we now should go through the checksum-table and check the listed + ;; partitions for errors. + + move.d PTABLE_START, $r3 + move.d [$r3], $r0 + cmp.d NOP_DI, $r0 ; make sure the nop/di is there... + bne do_rescue + nop + + ;; skip the code transparency block (10 bytes). + + addq 10, $r3 + + ;; check for correct magic + + move.w [$r3+], $r0 + cmp.w PTABLE_MAGIC, $r0 + bne do_rescue ; didn't recognize - trig rescue + nop + + ;; check for correct ptable checksum + + movu.w [$r3+], $r2 ; ptable length + move.d $r2, $r8 ; save for later, length of total ptable + addq 28, $r8 ; account for the rest + move.d [$r3+], $r4 ; ptable checksum + move.d $r3, $r1 + jsr checksum ; r1 source, r2 length, returns in r0 + + cmp.d $r0, $r4 + bne do_rescue ; didn't match - trig rescue + nop + + ;; ptable is ok. validate each entry. + + moveq -1, $r7 + +ploop: move.d [$r3+], $r1 ; partition offset (from ptable start) + bne notfirst ; check if it is the partition containing ptable + nop ; yes.. + move.d $r8, $r1 ; for its checksum check, skip the ptable + move.d [$r3+], $r2 ; partition length + sub.d $r8, $r2 ; minus the ptable length + ba bosse + nop +notfirst: + cmp.d -1, $r1 ; the end of the ptable ? + beq flash_ok ; if so, the flash is validated + move.d [$r3+], $r2 ; partition length +bosse: move.d [$r3+], $r5 ; checksum + move.d [$r3+], $r4 ; type and flags + addq 16, $r3 ; skip the reserved bytes + btstq 16, $r4 ; check ro flag + bpl ploop ; rw partition, skip validation + nop + btstq 17, $r4 ; check bootable flag + bpl 1f + nop + move.d $r1, $r7 ; remember boot partition offset +1: + add.d PTABLE_START, $r1 + + jsr checksum ; checksum the partition + + cmp.d $r0, $r5 + beq ploop ; checksums matched, go to next entry + nop + + ;; otherwise fall through to the rescue code. + +do_rescue: + ;; setup port PA and PB default initial directions and data + ;; (so we can flash LEDs, and so that DTR and others are set) + + move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0 + move.b $r0, [R_PORT_PA_DIR] + move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0 + move.b $r0, [R_PORT_PA_DATA] + + move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0 + move.b $r0, [R_PORT_PB_DIR] + move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0 + move.b $r0, [R_PORT_PB_DATA] + + ;; setup the serial port at 115200 baud + + moveq 0, $r0 + move.d $r0, [SERXOFF] + + move.b 0x99, $r0 + move.b $r0, [SERBAUD] ; 115.2kbaud for both transmit and receive + + move.b 0x40, $r0 ; rec enable + move.b $r0, [SERRECC] + + moveq 0, $r1 ; "timer" to clock out a LED red flash + move.d CODE_START, $r3 ; destination counter + movu.w CODE_LENGTH, $r4; length + +wait_ser: + addq 1, $r1 +#ifndef CONFIG_ETRAX_NO_LEDS +#ifdef CONFIG_ETRAX_PA_LEDS + move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r2 +#endif +#ifdef CONFIG_ETRAX_PB_LEDS + move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r2 +#endif + move.d (1 << CONFIG_ETRAX_LED1R) | (1 << CONFIG_ETRAX_LED2R), $r0 + btstq 16, $r1 + bpl 1f + nop + or.d $r0, $r2 ; set bit + ba 2f + nop +1: not $r0 ; clear bit + and.d $r0, $r2 +2: +#ifdef CONFIG_ETRAX_PA_LEDS + move.b $r2, [R_PORT_PA_DATA] +#endif +#ifdef CONFIG_ETRAX_PB_LEDS + move.b $r2, [R_PORT_PB_DATA] +#endif +#ifdef CONFIG_ETRAX_90000000_LEDS + move.b $r2, [0x90000000] +#endif +#endif + + ;; check if we got something on the serial port + + move.b [SERSTAT], $r0 + btstq 0, $r0 ; data_avail + bpl wait_ser + nop + + ;; got something - copy the byte and loop + + move.b [SERRDAT], $r0 + move.b $r0, [$r3+] + + subq 1, $r4 ; decrease length + bne wait_ser + nop + + ;; jump into downloaded code + + move.d RAM_INIT_MAGIC, $r8 ; Tell next product that DRAM is + ; initialized + jump CODE_START + +flash_ok: + ;; check r7, which contains either -1 or the partition to boot from + + cmp.d -1, $r7 + bne 1f + nop + move.d PTABLE_START, $r7; otherwise use the ptable start +1: + move.d RAM_INIT_MAGIC, $r8 ; Tell next product that DRAM is + ; initialized + jump $r7 ; boot! + + + ;; Helper subroutines + + ;; Will checksum by simple addition + ;; r1 - source + ;; r2 - length in bytes + ;; result will be in r0 +checksum: + moveq 0, $r0 + moveq CONFIG_ETRAX_FLASH1_SIZE, $r6 + + ;; If the first physical flash memory is exceeded wrap to the + ;; second one + btstq 26, $r1 ; Are we addressing first flash? + bpl 1f + nop + clear.d $r6 + +1: test.d $r6 ; 0 = no wrapping + beq 2f + nop + lslq 20, $r6 ; Convert MB to bytes + sub.d $r1, $r6 + +2: addu.b [$r1+], $r0 + subq 1, $r6 ; Flash memory left + beq 3f + subq 1, $r2 ; Length left + bne 2b + nop + ret + nop + +3: move.d MEM_CSE1_START, $r1 ; wrap to second flash + ba 2b + nop + +#endif diff --git a/arch/cris/boot/rescue/head_v32.S b/arch/cris/boot/rescue/head_v32.S new file mode 100644 index 000000000000..5f846b7700a3 --- /dev/null +++ b/arch/cris/boot/rescue/head_v32.S @@ -0,0 +1,26 @@ +/* + * Just get started by jumping to CONFIG_ETRAX_PTABLE_SECTOR to start + * kernel decompressor. + * + * In practice, this only works for NOR flash (or some convoluted RAM boot) + * and hence is not really useful for Artpec-3, so it's Etrax FS / NOR only. + * + */ + +#include + +#ifdef CONFIG_ETRAX_AXISFLASHMAP + +;; Code + + .text +start: + + ;; Start clocks for used blocks. + START_CLOCKS + + move.d CONFIG_ETRAX_PTABLE_SECTOR, $r10 + jump $r10 ; Jump to decompressor + nop + +#endif diff --git a/arch/cris/boot/rescue/kimagerescue.S b/arch/cris/boot/rescue/kimagerescue.S new file mode 100644 index 000000000000..6f7b3e61260b --- /dev/null +++ b/arch/cris/boot/rescue/kimagerescue.S @@ -0,0 +1,143 @@ +/* + * Rescue code to be prepended on a kimage and copied to the + * rescue serial port. + * This is called from the rescue code, it will copy received data to + * 4004000 and after a timeout jump to it. + */ + +#define ASSEMBLER_MACROS_ONLY +#include + +#define CODE_START 0x40004000 +#define CODE_LENGTH 784 +#define TIMEOUT_VALUE 1000 + + +#ifdef CONFIG_ETRAX_RESCUE_SER0 +#define SERXOFF R_SERIAL0_XOFF +#define SERBAUD R_SERIAL0_BAUD +#define SERRECC R_SERIAL0_REC_CTRL +#define SERRDAT R_SERIAL0_REC_DATA +#define SERSTAT R_SERIAL0_STATUS +#endif +#ifdef CONFIG_ETRAX_RESCUE_SER1 +#define SERXOFF R_SERIAL1_XOFF +#define SERBAUD R_SERIAL1_BAUD +#define SERRECC R_SERIAL1_REC_CTRL +#define SERRDAT R_SERIAL1_REC_DATA +#define SERSTAT R_SERIAL1_STATUS +#endif +#ifdef CONFIG_ETRAX_RESCUE_SER2 +#define SERXOFF R_SERIAL2_XOFF +#define SERBAUD R_SERIAL2_BAUD +#define SERRECC R_SERIAL2_REC_CTRL +#define SERRDAT R_SERIAL2_REC_DATA +#define SERSTAT R_SERIAL2_STATUS +#endif +#ifdef CONFIG_ETRAX_RESCUE_SER3 +#define SERXOFF R_SERIAL3_XOFF +#define SERBAUD R_SERIAL3_BAUD +#define SERRECC R_SERIAL3_REC_CTRL +#define SERRDAT R_SERIAL3_REC_DATA +#define SERSTAT R_SERIAL3_STATUS +#endif + + .text + ;; This is the entry point of the rescue code + ;; 0x80000000 if loaded in flash (as it should be) + ;; since etrax actually starts at address 2 when booting from flash, we + ;; put a nop (2 bytes) here first so we dont accidentally skip the di + + nop + di +#ifndef CONFIG_SVINTO_SIM + ;; setup port PA and PB default initial directions and data + ;; (so we can flash LEDs, and so that DTR and others are set) + + move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0 + move.b $r0, [R_PORT_PA_DIR] + move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0 + move.b $r0, [R_PORT_PA_DATA] + + move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0 + move.b $r0, [R_PORT_PB_DIR] + move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0 + move.b $r0, [R_PORT_PB_DATA] + + ;; We need to setup the bus registers before we start using the DRAM +#include "../../lib/dram_init.S" + +#endif + ;; Setup the stack to a suitably high address. + ;; We assume 8 MB is the minimum DRAM in an eLinux + ;; product and put the sp at the top for now. + + move.d 0x40800000, $sp + + ;; setup the serial port at 115200 baud + + moveq 0, $r0 + move.d $r0, [SERXOFF] + + move.b 0x99, $r0 + move.b $r0, [SERBAUD] ; 115.2kbaud for both transmit + ; and receive + + move.b 0x40, $r0 ; rec enable + move.b $r0, [SERRECC] + + + moveq 0, $r1 ; "timer" to clock out a LED red flash + move.d CODE_START, $r3 ; destination counter + move.d CODE_LENGTH, $r4 ; length + move.d TIMEOUT_VALUE, $r5 ; "timeout" until jump + +wait_ser: + addq 1, $r1 + subq 1, $r5 ; decrease timeout + beq jump_start ; timed out + nop +#ifndef CONFIG_ETRAX_NO_LEDS +#ifdef CONFIG_ETRAX_PA_LEDS + move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r2 +#endif +#ifdef CONFIG_ETRAX_PB_LEDS + move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r2 +#endif + move.d (1 << CONFIG_ETRAX_LED1R) | (1 << CONFIG_ETRAX_LED2R), $r0 + btstq 16, $r1 + bpl 1f + nop + or.d $r0, $r2 ; set bit + ba 2f + nop +1: not $r0 ; clear bit + and.d $r0, $r2 +2: +#ifdef CONFIG_ETRAX_PA_LEDS + move.b $r2, [R_PORT_PA_DATA] +#endif +#ifdef CONFIG_ETRAX_PB_LEDS + move.b $r2, [R_PORT_PB_DATA] +#endif +#endif + + ;; check if we got something on the serial port + + move.b [SERSTAT], $r0 + btstq 0, $r0 ; data_avail + bpl wait_ser + nop + + ;; got something - copy the byte and loop + + move.b [SERRDAT], $r0 + move.b $r0, [$r3+] + move.d TIMEOUT_VALUE, $r5 ; reset "timeout" + subq 1, $r4 ; decrease length + bne wait_ser + nop +jump_start: + ;; jump into downloaded code + + jump CODE_START diff --git a/arch/cris/boot/rescue/rescue_v10.lds b/arch/cris/boot/rescue/rescue_v10.lds new file mode 100644 index 000000000000..0b52a9490db6 --- /dev/null +++ b/arch/cris/boot/rescue/rescue_v10.lds @@ -0,0 +1,20 @@ +MEMORY + { + flash : ORIGIN = 0x00000000, + LENGTH = 0x00100000 + } + +SECTIONS +{ + .text : + { + stext = . ; + *(.text) + etext = . ; + } > flash + .data : + { + *(.data) + edata = . ; + } > flash +} diff --git a/arch/cris/boot/rescue/rescue_v32.lds b/arch/cris/boot/rescue/rescue_v32.lds new file mode 100644 index 000000000000..8ac646bc1a2b --- /dev/null +++ b/arch/cris/boot/rescue/rescue_v32.lds @@ -0,0 +1,43 @@ +/*#OUTPUT_FORMAT(elf32-us-cris) */ +OUTPUT_ARCH (crisv32) +/* Now that NAND support has been stripped, this file could be simplified, + * but it doesn't do any harm on the other hand so why bother. */ + +MEMORY + { + bootblk : ORIGIN = 0x38000000, + LENGTH = 0x00004000 + intmem : ORIGIN = 0x38004000, + LENGTH = 0x00005000 + } + +SECTIONS +{ + .text : + { + _stext = . ; + *(.text) + *(.init.text) + *(.rodata) + *(.rodata.*) + _etext = . ; + } > bootblk + .data : + { + *(.data) + _edata = . ; + } > bootblk + .bss : + { + _bss = . ; + *(.bss) + _end = ALIGN( 0x10 ) ; + } > intmem + + /* Get rid of stuff from EXPORT_SYMBOL(foo). */ + /DISCARD/ : + { + *(__ksymtab_strings) + *(__ksymtab) + } +} diff --git a/arch/cris/boot/rescue/testrescue.S b/arch/cris/boot/rescue/testrescue.S new file mode 100644 index 000000000000..fc7ec674eca5 --- /dev/null +++ b/arch/cris/boot/rescue/testrescue.S @@ -0,0 +1,24 @@ +/* + * Simple testcode to download by the rescue block. + * Just lights some LEDs to show it was downloaded correctly. + * + * Copyright (C) 1999 Axis Communications AB + */ + +#define ASSEMBLER_MACROS_ONLY +#include + + .text + + nop + nop + moveq -1, $r2 + move.b $r2, [R_PORT_PA_DIR] + moveq 0, $r2 + move.b $r2, [R_PORT_PA_DATA] + +endless: + nop + ba endless + nop + diff --git a/arch/cris/boot/tools/build.c b/arch/cris/boot/tools/build.c new file mode 100644 index 000000000000..c8adef364160 --- /dev/null +++ b/arch/cris/boot/tools/build.c @@ -0,0 +1,287 @@ +/* + * linux/tools/build.c + * + * Copyright (C) 1991, 1992 Linus Torvalds + */ + +/* + * This file builds a disk-image from three different files: + * + * - bootsect: exactly 512 bytes of 8086 machine code, loads the rest + * - setup: 8086 machine code, sets up system parm + * - system: 80386 code for actual system + * + * It does some checking that all files are of the correct type, and + * just writes the result to stdout, removing headers and padding to + * the right amount. It also writes some system data to stderr. + */ + +/* + * Changes by tytso to allow root device specification + * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 + * Cross compiling fixes by Gertjan van Wingerde, July 1996 + */ + +#include /* fprintf */ +#include +#include /* contains exit */ +#include /* unistd.h needs this */ +#include +#include +#include /* contains read/write */ +#include +#include + +#define MINIX_HEADER 32 + +#define N_MAGIC_OFFSET 1024 +#ifndef __BFD__ +static int GCC_HEADER = sizeof(struct exec); +#endif + +#ifdef __BIG_KERNEL__ +#define SYS_SIZE 0xffff +#else +#define SYS_SIZE DEF_SYSSIZE +#endif + +#define DEFAULT_MAJOR_ROOT 0 +#define DEFAULT_MINOR_ROOT 0 + +/* max nr of sectors of setup: don't change unless you also change + * bootsect etc */ +#define SETUP_SECTS 4 + +#define STRINGIFY(x) #x + +typedef union { + int i; + long l; + short s[2]; + char b[4]; +} conv; + +long intel_long(long l) +{ + conv t; + + t.b[0] = l & 0xff; l >>= 8; + t.b[1] = l & 0xff; l >>= 8; + t.b[2] = l & 0xff; l >>= 8; + t.b[3] = l & 0xff; l >>= 8; + return t.l; +} + +int intel_int(int i) +{ + conv t; + + t.b[0] = i & 0xff; i >>= 8; + t.b[1] = i & 0xff; i >>= 8; + t.b[2] = i & 0xff; i >>= 8; + t.b[3] = i & 0xff; i >>= 8; + return t.i; +} + +short intel_short(short l) +{ + conv t; + + t.b[0] = l & 0xff; l >>= 8; + t.b[1] = l & 0xff; l >>= 8; + return t.s[0]; +} + +void die(const char * str) +{ + fprintf(stderr,"%s\n",str); + exit(1); +} + +void usage(void) +{ + die("Usage: build bootsect setup system [rootdev] [> image]"); +} + +int main(int argc, char ** argv) +{ + int i,c,id,sz,tmp_int; + unsigned long sys_size, tmp_long; + char buf[1024]; +#ifndef __BFD__ + struct exec *ex = (struct exec *)buf; +#endif + char major_root, minor_root; + struct stat sb; + unsigned char setup_sectors; + + if ((argc < 4) || (argc > 5)) + usage(); + if (argc > 4) { + if (!strcmp(argv[4], "CURRENT")) { + if (stat("/", &sb)) { + perror("/"); + die("Couldn't stat /"); + } + major_root = major(sb.st_dev); + minor_root = minor(sb.st_dev); + } else if (strcmp(argv[4], "FLOPPY")) { + if (stat(argv[4], &sb)) { + perror(argv[4]); + die("Couldn't stat root device."); + } + major_root = major(sb.st_rdev); + minor_root = minor(sb.st_rdev); + } else { + major_root = 0; + minor_root = 0; + } + } else { + major_root = DEFAULT_MAJOR_ROOT; + minor_root = DEFAULT_MINOR_ROOT; + } + fprintf(stderr, "Root device is (%d, %d)\n", major_root, minor_root); + for (i=0;i0 ; i+=c ) +#ifdef __BIG_KERNEL__ + { + if (!i) { + /* Working with memcpy because of alignment constraints + on Sparc - Gertjan */ + memcpy(&tmp_long, &buf[2], sizeof(long)); + if (tmp_long != intel_long(0x53726448) ) + die("Wrong magic in loader header of 'setup'"); + memcpy(&tmp_int, &buf[6], sizeof(int)); + if (tmp_int < intel_int(0x200)) + die("Wrong version of loader header of 'setup'"); + buf[0x11] = 1; /* LOADED_HIGH */ + tmp_long = intel_long(0x100000); + memcpy(&buf[0x14], &tmp_long, sizeof(long)); /* code32_start */ + } +#endif + if (write(1,buf,c)!=c) + die("Write call failed"); +#ifdef __BIG_KERNEL__ + } +#endif + if (c != 0) + die("read-error on 'setup'"); + close (id); + setup_sectors = (unsigned char)((i + 511) / 512); + /* for compatibility with LILO */ + if (setup_sectors < SETUP_SECTS) + setup_sectors = SETUP_SECTS; + fprintf(stderr,"Setup is %d bytes.\n",i); + for (c=0 ; c sizeof(buf)) + c = sizeof(buf); + if (write(1,buf,c) != c) + die("Write call failed"); + i += c; + } + + if ((id=open(argv[3],O_RDONLY,0))<0) + die("Unable to open 'system'"); +#ifndef __BFD__ + if (read(id,buf,GCC_HEADER) != GCC_HEADER) + die("Unable to read header of 'system'"); + if (N_MAGIC(*ex) == ZMAGIC) { + GCC_HEADER = N_MAGIC_OFFSET; + lseek(id, GCC_HEADER, SEEK_SET); + } else if (N_MAGIC(*ex) != QMAGIC) + die("Non-GCC header of 'system'"); + fprintf(stderr,"System is %d kB (%d kB code, %d kB data and %d kB bss)\n", + (ex->a_text+ex->a_data+ex->a_bss)/1024, + ex->a_text /1024, + ex->a_data /1024, + ex->a_bss /1024); + sz = N_SYMOFF(*ex) - GCC_HEADER + 4; +#else + if (fstat (id, &sb)) { + perror ("fstat"); + die ("Unable to stat 'system'"); + } + sz = sb.st_size; + fprintf (stderr, "System is %d kB\n", sz/1024); +#endif + sys_size = (sz + 15) / 16; + if (sys_size > SYS_SIZE) + die("System is too big"); + while (sz > 0) { + int l, n; + + l = sz; + if (l > sizeof(buf)) + l = sizeof(buf); + if ((n=read(id, buf, l)) != l) { + if (n == -1) + perror(argv[1]); + else + fprintf(stderr, "Unexpected EOF\n"); + die("Can't read 'system'"); + } + if (write(1, buf, l) != l) + die("Write failed"); + sz -= l; + } + close(id); + if (lseek(1, 497, 0) == 497) { + if (write(1, &setup_sectors, 1) != 1) + die("Write of setup sectors failed"); + } + if (lseek(1,500,0) == 500) { + buf[0] = (sys_size & 0xff); + buf[1] = ((sys_size >> 8) & 0xff); + if (write(1, buf, 2) != 2) + die("Write failed"); + } + return(0); +} -- cgit v1.2.2 From d7bd15f67ebaaebc842a971e600c364a73b81b22 Mon Sep 17 00:00:00 2001 From: Jesper Nilsson Date: Tue, 21 Apr 2009 13:10:33 +0200 Subject: CRISv32: Remove obsolete vcs_hook.o from Makefile On Sun, Apr 19, 2009 at 10:01:50PM +0200, Robert P. J. Day wrote: > ./arch/cris/arch-v32/kernel/Makefile:obj-$(CONFIG_ETRAXFS_SIM) += vcs_hook.o > > there appears to be no definition of ETRAXFS_SIM anywhere. There hasn't been a vcs_hook.c file here for ages. Remove the line from the Makefile. Signed-off-by: Jesper Nilsson Reported-by: "Robert P. J. Day" --- arch/cris/arch-v32/kernel/Makefile | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/cris/arch-v32/kernel/Makefile b/arch/cris/arch-v32/kernel/Makefile index 993d987b0078..40358355d0cb 100644 --- a/arch/cris/arch-v32/kernel/Makefile +++ b/arch/cris/arch-v32/kernel/Makefile @@ -9,8 +9,6 @@ obj-y := entry.o traps.o irq.o debugport.o \ process.o ptrace.o setup.o signal.o traps.o time.o \ cache.o cacheflush.o -obj-$(CONFIG_ETRAXFS_SIM) += vcs_hook.o - obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_ETRAX_KGDB) += kgdb.o kgdb_asm.o obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o -- cgit v1.2.2 From 0dbbbf1a0e305ad900b733e2ba1cac304d31696e Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Sat, 18 Apr 2009 21:48:52 +0400 Subject: fsl_rio: Pass the proper device to dma mapping routines The driver should pass a device that specifies internal DMA ops, but currently NULL pointer is passed, therefore following bug appears during boot up: ------------[ cut here ]------------ Kernel BUG at c0018a7c [verbose debug info unavailable] Oops: Exception in kernel mode, sig: 5 [#1] [...] NIP [c0018a7c] fsl_rio_doorbell_init+0x34/0x60 LR [c0018a70] fsl_rio_doorbell_init+0x28/0x60 Call Trace: [ef82bda0] [c0018a70] fsl_rio_doorbell_init+0x28/0x60 (unreliable) [ef82bdc0] [c0019160] fsl_rio_setup+0x6b8/0x84c [ef82be20] [c02d28ac] fsl_of_rio_rpn_probe+0x30/0x50 [ef82be40] [c0234f20] of_platform_device_probe+0x5c/0x84 [...] ---[ end trace 561bb236c800851f ]--- This patch fixes the issue. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/fsl_rio.c | 28 +++++++++++++++++----------- 1 file changed, 17 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index a0fa4ebb39c6..abdb124e1e2f 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -159,6 +160,7 @@ struct rio_msg_rx_ring { }; struct rio_priv { + struct device *dev; void __iomem *regs_win; struct rio_atmu_regs __iomem *atmu_regs; struct rio_atmu_regs __iomem *maint_atmu_regs; @@ -484,13 +486,13 @@ int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entr for (i = 0; i < priv->msg_tx_ring.size; i++) { priv->msg_tx_ring.virt_buffer[i] = - dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE, + dma_alloc_coherent(priv->dev, RIO_MSG_BUFFER_SIZE, &priv->msg_tx_ring.phys_buffer[i], GFP_KERNEL); if (!priv->msg_tx_ring.virt_buffer[i]) { rc = -ENOMEM; for (j = 0; j < priv->msg_tx_ring.size; j++) if (priv->msg_tx_ring.virt_buffer[j]) - dma_free_coherent(NULL, + dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE, priv->msg_tx_ring. virt_buffer[j], @@ -501,7 +503,7 @@ int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entr } /* Initialize outbound message descriptor ring */ - priv->msg_tx_ring.virt = dma_alloc_coherent(NULL, + priv->msg_tx_ring.virt = dma_alloc_coherent(priv->dev, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE, &priv->msg_tx_ring.phys, GFP_KERNEL); if (!priv->msg_tx_ring.virt) { @@ -549,12 +551,13 @@ int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entr return rc; out_irq: - dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE, + dma_free_coherent(priv->dev, + priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE, priv->msg_tx_ring.virt, priv->msg_tx_ring.phys); out_dma: for (i = 0; i < priv->msg_tx_ring.size; i++) - dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE, + dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE, priv->msg_tx_ring.virt_buffer[i], priv->msg_tx_ring.phys_buffer[i]); @@ -576,7 +579,8 @@ void rio_close_outb_mbox(struct rio_mport *mport, int mbox) out_be32(&priv->msg_regs->omr, 0); /* Free ring */ - dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE, + dma_free_coherent(priv->dev, + priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE, priv->msg_tx_ring.virt, priv->msg_tx_ring.phys); /* Free interrupt */ @@ -654,7 +658,7 @@ int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entri priv->msg_rx_ring.virt_buffer[i] = NULL; /* Initialize inbound message ring */ - priv->msg_rx_ring.virt = dma_alloc_coherent(NULL, + priv->msg_rx_ring.virt = dma_alloc_coherent(priv->dev, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE, &priv->msg_rx_ring.phys, GFP_KERNEL); if (!priv->msg_rx_ring.virt) { @@ -673,7 +677,7 @@ int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entri rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0, "msg_rx", (void *)mport); if (rc < 0) { - dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE, + dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE, priv->msg_tx_ring.virt_buffer[i], priv->msg_tx_ring.phys_buffer[i]); goto out; @@ -713,7 +717,7 @@ void rio_close_inb_mbox(struct rio_mport *mport, int mbox) out_be32(&priv->msg_regs->imr, 0); /* Free ring */ - dma_free_coherent(NULL, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE, + dma_free_coherent(priv->dev, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE, priv->msg_rx_ring.virt, priv->msg_rx_ring.phys); /* Free interrupt */ @@ -890,7 +894,7 @@ static int fsl_rio_doorbell_init(struct rio_mport *mport) } /* Initialize inbound doorbells */ - priv->dbell_ring.virt = dma_alloc_coherent(NULL, 512 * + priv->dbell_ring.virt = dma_alloc_coherent(priv->dev, 512 * DOORBELL_MESSAGE_SIZE, &priv->dbell_ring.phys, GFP_KERNEL); if (!priv->dbell_ring.virt) { printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n"); @@ -911,7 +915,7 @@ static int fsl_rio_doorbell_init(struct rio_mport *mport) "dbell_rx", (void *)mport); if (rc < 0) { iounmap(priv->dbell_win); - dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE, + dma_free_coherent(priv->dev, 512 * DOORBELL_MESSAGE_SIZE, priv->dbell_ring.virt, priv->dbell_ring.phys); printk(KERN_ERR "MPC85xx RIO: unable to request inbound doorbell irq"); @@ -1087,6 +1091,8 @@ int fsl_rio_setup(struct of_device *dev) rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0); strcpy(port->name, "RIO0 mport"); + priv->dev = &dev->dev; + port->ops = ops; port->host_deviceid = fsl_rio_get_hdid(port->id); -- cgit v1.2.2 From 595e23f390b675a5a264af48a42eda81413f2598 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Mon, 20 Apr 2009 10:54:35 -0500 Subject: powerpc: don't disable SATA interrupts on Freescale MPC8610 HPCD The ULI 1575 PCI quirk function for the Freescale MPC8610 HPCD was disabling the SATA INTx interrupt, even when SATA support was enabled. This was safe, because the SATA driver re-enabled it. But with commit a5bfc471 ("ahci: drop intx manipulation on msi enable"), the driver no longer does this, and so SATA support on the 8610 HPCD is broken. The original quirk function disabled INTx because it caused some other interrupt problem during early development on this board, but no one remembers any more what that problem was, and it doesn't seem to occur any more. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/platforms/fsl_uli1575.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c index 1db6b9e037fc..65a35f38e062 100644 --- a/arch/powerpc/platforms/fsl_uli1575.c +++ b/arch/powerpc/platforms/fsl_uli1575.c @@ -275,11 +275,6 @@ static void __devinit hpcd_quirk_uli5288(struct pci_dev *dev) if (!machine_is(mpc86xx_hpcd)) return; - /* Interrupt Disable, Needed when SATA disabled */ - pci_read_config_word(dev, PCI_COMMAND, &temp); - temp |= 1<<10; - pci_write_config_word(dev, PCI_COMMAND, temp); - pci_read_config_byte(dev, 0x83, &c); c |= 0x80; pci_write_config_byte(dev, 0x83, c); -- cgit v1.2.2 From 778544e59857bed3f8c152e3c8755b12f7f3971f Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 15 Apr 2009 16:10:20 -0500 Subject: powerpc/85xx: Updated generic mpc85xx_defconfig Signed-off-by: Kumar Gala --- arch/powerpc/configs/mpc85xx_defconfig | 213 ++++++++++++++------------------- 1 file changed, 88 insertions(+), 125 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index fb08819d7cc4..6a3ea1aa2960 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:37 2009 +# Linux kernel version: 2.6.30-rc2 +# Tue Apr 21 15:38:23 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,11 +75,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set CONFIG_AUDIT=y # CONFIG_AUDITSYSCALL is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -93,22 +105,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -118,10 +132,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -130,6 +146,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -142,7 +159,6 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -158,11 +174,6 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -178,6 +189,7 @@ CONFIG_MPC85xx_CDS=y CONFIG_MPC85xx_MDS=y CONFIG_MPC8536_DS=y CONFIG_MPC85xx_DS=y +# CONFIG_SOCRATES is not set CONFIG_KSI8560=y # CONFIG_STX_GP3 is not set CONFIG_TQM8540=y @@ -249,9 +261,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -278,6 +293,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -291,17 +307,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -389,6 +405,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -401,7 +418,6 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set @@ -456,13 +472,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -521,9 +544,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -546,6 +571,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -622,6 +648,7 @@ CONFIG_PATA_ALI=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -655,6 +682,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -675,6 +704,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -685,11 +715,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_UCC_GETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -699,6 +731,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -708,6 +741,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -715,7 +749,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -885,12 +918,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -969,7 +999,7 @@ CONFIG_VIDEO_MEDIA=m # # CONFIG_MEDIA_ATTACH is not set CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set CONFIG_MEDIA_TUNER_SIMPLE=m CONFIG_MEDIA_TUNER_TDA8290=m CONFIG_MEDIA_TUNER_TDA9887=m @@ -978,6 +1008,7 @@ CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MC44S803=m # CONFIG_DVB_DYNAMIC_MINORS is not set CONFIG_DVB_CAPTURE_DRIVERS=y @@ -1017,103 +1048,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # Supported DVB Frontends # - -# -# Customise DVB Frontends -# # CONFIG_DVB_FE_CUSTOMISE is not set - -# -# Multistandard (satellite) frontends -# -# CONFIG_DVB_STB0899 is not set -# CONFIG_DVB_STB6100 is not set - -# -# DVB-S (satellite) frontends -# -# CONFIG_DVB_CX24110 is not set -# CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_MT312 is not set -# CONFIG_DVB_S5H1420 is not set -# CONFIG_DVB_STV0288 is not set -# CONFIG_DVB_STB6000 is not set -# CONFIG_DVB_STV0299 is not set -# CONFIG_DVB_TDA8083 is not set -# CONFIG_DVB_TDA10086 is not set -# CONFIG_DVB_TDA8261 is not set -# CONFIG_DVB_VES1X93 is not set -# CONFIG_DVB_TUNER_ITD1000 is not set -# CONFIG_DVB_TUNER_CX24113 is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TUA6100 is not set -# CONFIG_DVB_CX24116 is not set -# CONFIG_DVB_SI21XX is not set - -# -# DVB-T (terrestrial) frontends -# -# CONFIG_DVB_SP8870 is not set -# CONFIG_DVB_SP887X is not set -# CONFIG_DVB_CX22700 is not set -# CONFIG_DVB_CX22702 is not set -# CONFIG_DVB_DRX397XD is not set -# CONFIG_DVB_L64781 is not set -# CONFIG_DVB_TDA1004X is not set -# CONFIG_DVB_NXT6000 is not set -# CONFIG_DVB_MT352 is not set -# CONFIG_DVB_ZL10353 is not set -# CONFIG_DVB_DIB3000MB is not set -# CONFIG_DVB_DIB3000MC is not set -# CONFIG_DVB_DIB7000M is not set -# CONFIG_DVB_DIB7000P is not set -# CONFIG_DVB_TDA10048 is not set - -# -# DVB-C (cable) frontends -# -# CONFIG_DVB_VES1820 is not set -# CONFIG_DVB_TDA10021 is not set -# CONFIG_DVB_TDA10023 is not set -# CONFIG_DVB_STV0297 is not set - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -# CONFIG_DVB_NXT200X is not set -# CONFIG_DVB_OR51211 is not set -# CONFIG_DVB_OR51132 is not set -# CONFIG_DVB_BCM3510 is not set -# CONFIG_DVB_LGDT330X is not set -# CONFIG_DVB_LGDT3304 is not set -# CONFIG_DVB_S5H1409 is not set -# CONFIG_DVB_AU8522 is not set -# CONFIG_DVB_S5H1411 is not set - -# -# ISDB-T (terrestrial) frontends -# -# CONFIG_DVB_S921 is not set - -# -# Digital terrestrial only tuners/PLL -# -# CONFIG_DVB_PLL is not set -# CONFIG_DVB_TUNER_DIB0070 is not set - -# -# SEC control devices for DVB-S -# -# CONFIG_DVB_LNBP21 is not set -# CONFIG_DVB_ISL6405 is not set -# CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_LGS8GL5 is not set - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set -# CONFIG_DVB_AF9013 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1193,6 +1128,8 @@ CONFIG_SND_PCI=y # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1247,15 +1184,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1329,11 +1268,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1375,7 +1314,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1392,6 +1330,7 @@ CONFIG_USB_STORAGE=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1406,6 +1345,8 @@ CONFIG_EDAC=y # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_MPC85XX=y +# CONFIG_EDAC_AMD8131 is not set +# CONFIG_EDAC_AMD8111 is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1460,7 +1401,7 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set CONFIG_DMADEVICES=y # @@ -1473,7 +1414,9 @@ CONFIG_DMA_ENGINE=y # DMA Clients # # CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1484,6 +1427,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1507,6 +1451,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1562,6 +1511,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1577,7 +1527,6 @@ CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1648,6 +1597,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1662,11 +1612,12 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1684,6 +1635,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1714,9 +1668,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1724,17 +1681,20 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1765,10 +1725,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1837,6 +1799,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # -- cgit v1.2.2 From 8db3dca86e0a1b74b87ffb612f1e57c481a122b9 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 21 Apr 2009 15:40:51 -0500 Subject: powerpc/85xx: Enabled a bunch of FSL specific drivers/options * Add new 85xx boards * Added QE/FSL gpio * Enabled PHY drivers that exist on various boards * Enabled FS_ENET & UCC ethernet drivers (CPM2 & QE) * FSL HW Crypto Engine * CPM I2C * QE Serial Signed-off-by: Kumar Gala --- arch/powerpc/configs/mpc85xx_defconfig | 43 +++++++++++++++++++++------------- 1 file changed, 27 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index 6a3ea1aa2960..c162724fed4f 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.30-rc2 -# Tue Apr 21 15:38:23 2009 +# Tue Apr 21 15:40:23 2009 # # CONFIG_PPC64 is not set @@ -189,9 +189,9 @@ CONFIG_MPC85xx_CDS=y CONFIG_MPC85xx_MDS=y CONFIG_MPC8536_DS=y CONFIG_MPC85xx_DS=y -# CONFIG_SOCRATES is not set +CONFIG_SOCRATES=y CONFIG_KSI8560=y -# CONFIG_STX_GP3 is not set +CONFIG_STX_GP3=y CONFIG_TQM8540=y CONFIG_TQM8541=y CONFIG_TQM8548=y @@ -212,11 +212,11 @@ CONFIG_PPC_I8259=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set CONFIG_QUICC_ENGINE=y -# CONFIG_QE_GPIO is not set +CONFIG_QE_GPIO=y CONFIG_CPM2=y CONFIG_FSL_ULI1575=y CONFIG_CPM=y -# CONFIG_MPC8xxx_GPIO is not set +CONFIG_MPC8xxx_GPIO=y # CONFIG_SIMPLE_GPIO is not set # @@ -661,11 +661,11 @@ CONFIG_PHYLIB=y # # MII PHY device drivers # -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set +CONFIG_MARVELL_PHY=y +CONFIG_DAVICOM_PHY=y # CONFIG_QSEMI_PHY is not set # CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set +CONFIG_CICADA_PHY=y CONFIG_VITESSE_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set @@ -674,7 +674,7 @@ CONFIG_VITESSE_PHY=y # CONFIG_NATIONAL_PHY is not set # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_FIXED_PHY is not set +CONFIG_FIXED_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y @@ -696,7 +696,10 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_ATL2 is not set -# CONFIG_FS_ENET is not set +CONFIG_FS_ENET=y +CONFIG_FS_ENET_HAS_SCC=y +CONFIG_FS_ENET_HAS_FCC=y +# CONFIG_FS_ENET_MDIO_FCC is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -717,7 +720,9 @@ CONFIG_NETDEV_1000=y # CONFIG_BNX2 is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_UCC_GETH is not set +CONFIG_UCC_GETH=y +# CONFIG_UGETH_MAGIC_PACKET is not set +# CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -846,14 +851,15 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_CPM is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set -# CONFIG_SERIAL_QE is not set +CONFIG_SERIAL_QE=m CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -890,7 +896,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # -# CONFIG_I2C_CPM is not set +CONFIG_I2C_CPM=m # CONFIG_I2C_GPIO is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set @@ -1253,6 +1259,7 @@ CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_FHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set @@ -1597,6 +1604,9 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +CONFIG_UCC_SLOW=y +CONFIG_UCC_FAST=y +CONFIG_UCC=y # CONFIG_BINARY_PRINTF is not set # @@ -1719,6 +1729,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y @@ -1732,7 +1743,7 @@ CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_NULL is not set CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set # @@ -1808,7 +1819,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set -# CONFIG_CRYPTO_DEV_TALITOS is not set +CONFIG_CRYPTO_DEV_TALITOS=y CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set -- cgit v1.2.2 From 3de0e075486cc1a175d63bb7167bfc66e9ac16f4 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 15 Apr 2009 16:33:08 -0500 Subject: powerpc/85xx: Added SMP defconfig Since the vast majority of 85xx platforms are UP we introduce a new SMP config for the few platforms that have more than one core. Beyond CONFIG_SMP=y and its dependencies this should be identical to mpc85xx_defconfig. Signed-off-by: Kumar Gala --- arch/powerpc/configs/mpc85xx_smp_defconfig | 1829 ++++++++++++++++++++++++++++ 1 file changed, 1829 insertions(+) create mode 100644 arch/powerpc/configs/mpc85xx_smp_defconfig (limited to 'arch') diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig new file mode 100644 index 000000000000..1aa1c508d600 --- /dev/null +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -0,0 +1,1829 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc2 +# Tue Apr 21 15:41:18 2009 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +CONFIG_PPC_85xx=y +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_E500=y +# CONFIG_PPC_E500MC is not set +CONFIG_BOOKE=y +CONFIG_FSL_BOOKE=y +CONFIG_FSL_EMB_PERFMON=y +# CONFIG_PHYS_64BIT is not set +CONFIG_SPE=y +CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_SMP=y +CONFIG_NR_CPUS=8 +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +CONFIG_GENERIC_TBSYNC=y +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +CONFIG_AUDIT=y +# CONFIG_AUDITSYSCALL is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +# CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# Platform support +# +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +CONFIG_MPC85xx=y +CONFIG_MPC8540_ADS=y +CONFIG_MPC8560_ADS=y +CONFIG_MPC85xx_CDS=y +CONFIG_MPC85xx_MDS=y +CONFIG_MPC8536_DS=y +CONFIG_MPC85xx_DS=y +CONFIG_SOCRATES=y +CONFIG_KSI8560=y +CONFIG_STX_GP3=y +CONFIG_TQM8540=y +CONFIG_TQM8541=y +CONFIG_TQM8548=y +CONFIG_TQM8555=y +CONFIG_TQM8560=y +CONFIG_SBC8548=y +# CONFIG_SBC8560 is not set +CONFIG_TQM85xx=y +# CONFIG_IPIC is not set +CONFIG_MPIC=y +# CONFIG_MPIC_WEIRD is not set +CONFIG_PPC_I8259=y +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +CONFIG_QUICC_ENGINE=y +CONFIG_QE_GPIO=y +CONFIG_CPM2=y +CONFIG_FSL_ULI1575=y +CONFIG_CPM=y +CONFIG_MPC8xxx_GPIO=y +# CONFIG_SIMPLE_GPIO is not set + +# +# Kernel options +# +CONFIG_HIGHMEM=y +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +CONFIG_BINFMT_MISC=m +CONFIG_MATH_EMULATION=y +# CONFIG_IOMMU_HELPER is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_IRQ_ALL_CPUS is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +# CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 +CONFIG_PAGE_OFFSET=0xc0000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=m +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=y +CONFIG_NET_IPGRE=y +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_ARPD=y +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y +# CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set +# CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y +CONFIG_OF_I2C=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=y +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=131072 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +CONFIG_SCSI_LOGGING=y +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +CONFIG_SATA_AHCI=y +# CONFIG_SATA_SIL24 is not set +CONFIG_SATA_FSL=y +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +CONFIG_PATA_ALI=y +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +CONFIG_DAVICOM_PHY=y +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +CONFIG_CICADA_PHY=y +CONFIG_VITESSE_PHY=y +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +CONFIG_FIXED_PHY=y +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +# CONFIG_ATL2 is not set +CONFIG_FS_ENET=y +CONFIG_FS_ENET_HAS_SCC=y +CONFIG_FS_ENET_HAS_FCC=y +# CONFIG_FS_ENET_MDIO_FCC is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_IGBVF is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y +CONFIG_GIANFAR=y +CONFIG_UCC_GETH=y +# CONFIG_UGETH_MAGIC_PACKET is not set +# CONFIG_UGETH_TX_ON_DEMAND is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y +# CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_VXGE is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set +# CONFIG_BE2NET is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_CPM is not set +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_OF_PLATFORM is not set +CONFIG_SERIAL_QE=m +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +CONFIG_NVRAM=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_CPM=m +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +CONFIG_DVB_CORE=m +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MC44S803=m +# CONFIG_DVB_DYNAMIC_MINORS is not set +CONFIG_DVB_CAPTURE_DRIVERS=y + +# +# Supported SAA7146 based PCI Adapters +# +# CONFIG_TTPCI_EEPROM is not set +# CONFIG_DVB_BUDGET_CORE is not set + +# +# Supported USB Adapters +# +# CONFIG_DVB_USB is not set +# CONFIG_DVB_TTUSB_BUDGET is not set +# CONFIG_DVB_TTUSB_DEC is not set +# CONFIG_DVB_SIANO_SMS1XXX is not set + +# +# Supported FlexCopII (B2C2) Adapters +# +# CONFIG_DVB_B2C2_FLEXCOP is not set + +# +# Supported BT878 Adapters +# + +# +# Supported Pluto2 Adapters +# +# CONFIG_DVB_PLUTO2 is not set + +# +# Supported SDMC DM1105 Adapters +# +# CONFIG_DVB_DM1105 is not set + +# +# Supported DVB Frontends +# +# CONFIG_DVB_FE_CUSTOMISE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +CONFIG_SND_AC97_CODEC=y +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +# CONFIG_SND_AC97_POWER_SAVE is not set +CONFIG_SND_PCI=y +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5530 is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +CONFIG_SND_INTEL8X0=y +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set +CONFIG_SND_PPC=y +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_USX2Y is not set +# CONFIG_SND_USB_CAIAQ is not set +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=y +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set +CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set +CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_FSL=y +CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PPC_OF=y +CONFIG_USB_OHCI_HCD_PPC_OF_BE=y +CONFIG_USB_OHCI_HCD_PPC_OF_LE=y +CONFIG_USB_OHCI_HCD_PCI=y +CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y +CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_FHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_EDAC=y + +# +# Reporting subsystems +# +# CONFIG_EDAC_DEBUG is not set +CONFIG_EDAC_MM_EDAC=y +CONFIG_EDAC_MPC85XX=y +# CONFIG_EDAC_AMD8131 is not set +# CONFIG_EDAC_AMD8111 is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_GENERIC is not set +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +CONFIG_FSL_DMA=y +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +# CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set +# CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=y +# CONFIG_NTFS_DEBUG is not set +# CONFIG_NTFS_RW is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +CONFIG_ADFS_FS=m +# CONFIG_ADFS_FS_RW is not set +CONFIG_AFFS_FS=m +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +CONFIG_BEFS_FS=m +# CONFIG_BEFS_DEBUG is not set +CONFIG_BFS_FS=m +CONFIG_EFS_FS=m +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +CONFIG_VXFS_FS=m +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +# CONFIG_ROMFS_FS is not set +CONFIG_SYSV_FS=m +CONFIG_UFS_FS=m +# CONFIG_UFS_FS_WRITE is not set +# CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=y +# CONFIG_NFSD_V3 is not set +# CONFIG_NFSD_V4 is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set +CONFIG_UCC_SLOW=y +CONFIG_UCC_FAST=y +CONFIG_UCC=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_HIGHMEM is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set +CONFIG_VIRQ_DEBUG=y +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_CRYPTO_DEV_TALITOS=y +CONFIG_PPC_CLOCK=y +CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set -- cgit v1.2.2 From 0658c16056660886ea2f35c4f038be70a94b1532 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 15 Apr 2009 16:48:50 -0500 Subject: powerpc/85xx: Remove defconfigs that mpc85xx_{smp_}defconfig cover Signed-off-by: Kumar Gala --- arch/powerpc/configs/85xx/mpc8536_ds_defconfig | 1802 ------------------------ arch/powerpc/configs/85xx/mpc8544_ds_defconfig | 1802 ------------------------ arch/powerpc/configs/85xx/mpc8568mds_defconfig | 1309 ----------------- arch/powerpc/configs/85xx/mpc8572_ds_defconfig | 1794 ----------------------- 4 files changed, 6707 deletions(-) delete mode 100644 arch/powerpc/configs/85xx/mpc8536_ds_defconfig delete mode 100644 arch/powerpc/configs/85xx/mpc8544_ds_defconfig delete mode 100644 arch/powerpc/configs/85xx/mpc8568mds_defconfig delete mode 100644 arch/powerpc/configs/85xx/mpc8572_ds_defconfig (limited to 'arch') diff --git a/arch/powerpc/configs/85xx/mpc8536_ds_defconfig b/arch/powerpc/configs/85xx/mpc8536_ds_defconfig deleted file mode 100644 index e31b6a4732ed..000000000000 --- a/arch/powerpc/configs/85xx/mpc8536_ds_defconfig +++ /dev/null @@ -1,1802 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:04 2009 -# -# CONFIG_PPC64 is not set - -# -# Processor support -# -# CONFIG_6xx is not set -CONFIG_PPC_85xx=y -# CONFIG_PPC_8xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_E200 is not set -CONFIG_E500=y -# CONFIG_PPC_E500MC is not set -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -CONFIG_PPC_MMU_NOHASH=y -# CONFIG_PPC_MM_SLICES is not set -# CONFIG_SMP is not set -CONFIG_PPC32=y -CONFIG_WORD_SIZE=32 -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_MMU=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set -CONFIG_IRQ_PER_CPU=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_ARCH_HAS_ILOG2_U32=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -# CONFIG_ARCH_NO_VIRT_TO_BUS is not set -CONFIG_PPC=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_PPC_OF=y -CONFIG_OF=y -CONFIG_PPC_UDBG_16550=y -# CONFIG_GENERIC_TBSYNC is not set -CONFIG_AUDIT_ARCH=y -CONFIG_GENERIC_BUG=y -CONFIG_DEFAULT_UIMAGE=y -# CONFIG_PPC_DCR_NATIVE is not set -# CONFIG_PPC_DCR_MMIO is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_TASKSTATS is not set -CONFIG_AUDIT=y -# CONFIG_AUDITSYSCALL is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -# CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y -CONFIG_SLUB_DEBUG=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set -# CONFIG_FREEZER is not set - -# -# Platform support -# -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_MPC85xx_CDS is not set -# CONFIG_MPC85xx_MDS is not set -CONFIG_MPC8536_DS=y -# CONFIG_MPC85xx_DS is not set -# CONFIG_KSI8560 is not set -# CONFIG_STX_GP3 is not set -# CONFIG_TQM8540 is not set -# CONFIG_TQM8541 is not set -# CONFIG_TQM8548 is not set -# CONFIG_TQM8555 is not set -# CONFIG_TQM8560 is not set -# CONFIG_SBC8548 is not set -# CONFIG_SBC8560 is not set -# CONFIG_IPIC is not set -CONFIG_MPIC=y -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_QUICC_ENGINE is not set -# CONFIG_CPM2 is not set -# CONFIG_FSL_ULI1575 is not set -# CONFIG_MPC8xxx_GPIO is not set -# CONFIG_SIMPLE_GPIO is not set - -# -# Kernel options -# -CONFIG_HIGHMEM=y -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_SCHED_HRTICK=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_HAVE_AOUT is not set -CONFIG_BINFMT_MISC=m -CONFIG_MATH_EMULATION=y -# CONFIG_IOMMU_HELPER is not set -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_HAS_WALK_MEMORY=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MIGRATION=y -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_PPC_4K_PAGES=y -# CONFIG_PPC_16K_PAGES is not set -# CONFIG_PPC_64K_PAGES is not set -CONFIG_FORCE_MAX_ZONEORDER=11 -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_EXTRA_TARGETS="" -# CONFIG_PM is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_ZONE_DMA=y -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_FSL_SOC=y -CONFIG_FSL_PCI=y -CONFIG_PPC_PCI_CHOICE=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_SYSCALL=y -# CONFIG_PCIEPORTBUS is not set -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set -# CONFIG_PCI_DEBUG is not set -# CONFIG_PCI_STUB is not set -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HAS_RAPIDIO is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_PAGE_OFFSET=0xc0000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 -CONFIG_TASK_SIZE=0xc0000000 -CONFIG_NET=y - -# -# Networking options -# -CONFIG_COMPAT_NET_DEV_OPS=y -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=y -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -CONFIG_NET_KEY=m -# CONFIG_NET_KEY_MIGRATE is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_ASK_IP_FIB_HASH=y -# CONFIG_IP_FIB_TRIE is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=y -CONFIG_NET_IPGRE=y -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_ARPD=y -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -CONFIG_IPV6=y -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_IPV6_MIP6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_INET6_XFRM_MODE_TRANSPORT=y -CONFIG_INET6_XFRM_MODE_TUNNEL=y -CONFIG_INET6_XFRM_MODE_BEET=y -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=y -CONFIG_IPV6_NDISC_NODETYPE=y -# CONFIG_IPV6_TUNNEL is not set -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_IPV6_MROUTE is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_MSG is not set -# CONFIG_SCTP_DBG_OBJCNT is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -CONFIG_SCTP_HMAC_MD5=y -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_NET_DSA is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_FIB_RULES=y -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set -# CONFIG_WIMAX is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set -CONFIG_OF_DEVICE=y -CONFIG_OF_I2C=y -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=524288 -# CONFIG_BLK_DEV_XIP is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_MISC_DEVICES=y -# CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_ICS932S401 is not set -# CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HP_ILO is not set -# CONFIG_C2PORT is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -CONFIG_SCSI_LOGGING=y -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_CXGB3_ISCSI is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_LIBFC is not set -# CONFIG_FCOE is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set -# CONFIG_SCSI_DH is not set -CONFIG_ATA=y -# CONFIG_ATA_NONSTANDARD is not set -CONFIG_SATA_PMP=y -# CONFIG_SATA_AHCI is not set -CONFIG_SATA_SIL24=y -CONFIG_SATA_FSL=y -CONFIG_ATA_SFF=y -# CONFIG_SATA_SVW is not set -# CONFIG_ATA_PIIX is not set -# CONFIG_SATA_MV is not set -# CONFIG_SATA_NV is not set -# CONFIG_PDC_ADMA is not set -# CONFIG_SATA_QSTOR is not set -# CONFIG_SATA_PROMISE is not set -# CONFIG_SATA_SX4 is not set -CONFIG_SATA_SIL=y -# CONFIG_SATA_SIS is not set -# CONFIG_SATA_ULI is not set -# CONFIG_SATA_VIA is not set -# CONFIG_SATA_VITESSE is not set -# CONFIG_SATA_INIC162X is not set -# CONFIG_PATA_ALI is not set -# CONFIG_PATA_AMD is not set -# CONFIG_PATA_ARTOP is not set -# CONFIG_PATA_ATIIXP is not set -# CONFIG_PATA_CMD640_PCI is not set -# CONFIG_PATA_CMD64X is not set -# CONFIG_PATA_CS5520 is not set -# CONFIG_PATA_CS5530 is not set -# CONFIG_PATA_CYPRESS is not set -# CONFIG_PATA_EFAR is not set -# CONFIG_ATA_GENERIC is not set -# CONFIG_PATA_HPT366 is not set -# CONFIG_PATA_HPT37X is not set -# CONFIG_PATA_HPT3X2N is not set -# CONFIG_PATA_HPT3X3 is not set -# CONFIG_PATA_IT821X is not set -# CONFIG_PATA_IT8213 is not set -# CONFIG_PATA_JMICRON is not set -# CONFIG_PATA_TRIFLEX is not set -# CONFIG_PATA_MARVELL is not set -# CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_OLDPIIX is not set -# CONFIG_PATA_NETCELL is not set -# CONFIG_PATA_NINJA32 is not set -# CONFIG_PATA_NS87410 is not set -# CONFIG_PATA_NS87415 is not set -# CONFIG_PATA_OPTI is not set -# CONFIG_PATA_OPTIDMA is not set -# CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_RADISYS is not set -# CONFIG_PATA_RZ1000 is not set -# CONFIG_PATA_SC1200 is not set -# CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set -# CONFIG_PATA_SIL680 is not set -# CONFIG_PATA_SIS is not set -# CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set -# CONFIG_PATA_PLATFORM is not set -# CONFIG_PATA_SCH is not set -# CONFIG_MD is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# Enable only one of the two stacks, unless you know what you are doing -# -# CONFIG_FIREWIRE is not set -# CONFIG_IEEE1394 is not set -# CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_ARCNET is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -CONFIG_VITESSE_PHY=y -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_NET_PCI is not set -# CONFIG_B44 is not set -# CONFIG_ATL2 is not set -CONFIG_NETDEV_1000=y -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_E1000E is not set -# CONFIG_IP1000 is not set -# CONFIG_IGB is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -CONFIG_SKGE=y -# CONFIG_SKGE_DEBUG is not set -CONFIG_SKY2=y -# CONFIG_SKY2_DEBUG is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_GIANFAR=y -# CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -# CONFIG_ATL1E is not set -# CONFIG_JME is not set -CONFIG_NETDEV_10000=y -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3_DEPENDS=y -# CONFIG_CHELSIO_T3 is not set -# CONFIG_ENIC is not set -# CONFIG_IXGBE is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set -# CONFIG_NIU is not set -# CONFIG_MLX4_EN is not set -# CONFIG_MLX4_CORE is not set -# CONFIG_TEHUTI is not set -# CONFIG_BNX2X is not set -# CONFIG_QLGE is not set -# CONFIG_SFC is not set -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -CONFIG_INPUT_FF_MEMLESS=m -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_SERIO_XILINX_XPS_PS2 is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_NOZOMI is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_HVC_UDBG is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_CHARDEV is not set -CONFIG_I2C_HELPER_AUTO=y - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_ISCH is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -CONFIG_I2C_MPC=y -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_SIMTEC is not set - -# -# External I2C/SMBus adapter drivers -# -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# -# Other I2C/SMBus bus drivers -# -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -CONFIG_THERMAL=y -# CONFIG_WATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_TWL4030_CORE is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_PMIC_DA903X is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_PCF50633 is not set -# CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -CONFIG_DVB_CORE=m -CONFIG_VIDEO_MEDIA=m - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -# CONFIG_DVB_DYNAMIC_MINORS is not set -CONFIG_DVB_CAPTURE_DRIVERS=y - -# -# Supported SAA7146 based PCI Adapters -# -# CONFIG_TTPCI_EEPROM is not set -# CONFIG_DVB_BUDGET_CORE is not set - -# -# Supported USB Adapters -# -# CONFIG_DVB_USB is not set -# CONFIG_DVB_TTUSB_BUDGET is not set -# CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_SIANO_SMS1XXX is not set - -# -# Supported FlexCopII (B2C2) Adapters -# -# CONFIG_DVB_B2C2_FLEXCOP is not set - -# -# Supported BT878 Adapters -# - -# -# Supported Pluto2 Adapters -# -# CONFIG_DVB_PLUTO2 is not set - -# -# Supported SDMC DM1105 Adapters -# -# CONFIG_DVB_DM1105 is not set - -# -# Supported DVB Frontends -# - -# -# Customise DVB Frontends -# -# CONFIG_DVB_FE_CUSTOMISE is not set - -# -# Multistandard (satellite) frontends -# -# CONFIG_DVB_STB0899 is not set -# CONFIG_DVB_STB6100 is not set - -# -# DVB-S (satellite) frontends -# -# CONFIG_DVB_CX24110 is not set -# CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_MT312 is not set -# CONFIG_DVB_S5H1420 is not set -# CONFIG_DVB_STV0288 is not set -# CONFIG_DVB_STB6000 is not set -# CONFIG_DVB_STV0299 is not set -# CONFIG_DVB_TDA8083 is not set -# CONFIG_DVB_TDA10086 is not set -# CONFIG_DVB_TDA8261 is not set -# CONFIG_DVB_VES1X93 is not set -# CONFIG_DVB_TUNER_ITD1000 is not set -# CONFIG_DVB_TUNER_CX24113 is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TUA6100 is not set -# CONFIG_DVB_CX24116 is not set -# CONFIG_DVB_SI21XX is not set - -# -# DVB-T (terrestrial) frontends -# -# CONFIG_DVB_SP8870 is not set -# CONFIG_DVB_SP887X is not set -# CONFIG_DVB_CX22700 is not set -# CONFIG_DVB_CX22702 is not set -# CONFIG_DVB_DRX397XD is not set -# CONFIG_DVB_L64781 is not set -# CONFIG_DVB_TDA1004X is not set -# CONFIG_DVB_NXT6000 is not set -# CONFIG_DVB_MT352 is not set -# CONFIG_DVB_ZL10353 is not set -# CONFIG_DVB_DIB3000MB is not set -# CONFIG_DVB_DIB3000MC is not set -# CONFIG_DVB_DIB7000M is not set -# CONFIG_DVB_DIB7000P is not set -# CONFIG_DVB_TDA10048 is not set - -# -# DVB-C (cable) frontends -# -# CONFIG_DVB_VES1820 is not set -# CONFIG_DVB_TDA10021 is not set -# CONFIG_DVB_TDA10023 is not set -# CONFIG_DVB_STV0297 is not set - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -# CONFIG_DVB_NXT200X is not set -# CONFIG_DVB_OR51211 is not set -# CONFIG_DVB_OR51132 is not set -# CONFIG_DVB_BCM3510 is not set -# CONFIG_DVB_LGDT330X is not set -# CONFIG_DVB_LGDT3304 is not set -# CONFIG_DVB_S5H1409 is not set -# CONFIG_DVB_AU8522 is not set -# CONFIG_DVB_S5H1411 is not set - -# -# ISDB-T (terrestrial) frontends -# -# CONFIG_DVB_S921 is not set - -# -# Digital terrestrial only tuners/PLL -# -# CONFIG_DVB_PLL is not set -# CONFIG_DVB_TUNER_DIB0070 is not set - -# -# SEC control devices for DVB-S -# -# CONFIG_DVB_LNBP21 is not set -# CONFIG_DVB_ISL6405 is not set -# CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_LGS8GL5 is not set - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set -# CONFIG_DVB_AF9013 is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VGACON_SOFT_SCROLLBACK is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_SOUND=y -# CONFIG_SOUND_OSS_CORE is not set -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -# CONFIG_SND_SEQUENCER is not set -# CONFIG_SND_MIXER_OSS is not set -# CONFIG_SND_PCM_OSS is not set -# CONFIG_SND_HRTIMER is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -CONFIG_SND_VMASTER=y -CONFIG_SND_AC97_CODEC=y -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -# CONFIG_SND_AC97_POWER_SAVE is not set -CONFIG_SND_PCI=y -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS300 is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AW2 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_OXYGEN is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_CS5530 is not set -# CONFIG_SND_DARLA20 is not set -# CONFIG_SND_GINA20 is not set -# CONFIG_SND_LAYLA20 is not set -# CONFIG_SND_DARLA24 is not set -# CONFIG_SND_GINA24 is not set -# CONFIG_SND_LAYLA24 is not set -# CONFIG_SND_MONA is not set -# CONFIG_SND_MIA is not set -# CONFIG_SND_ECHO3G is not set -# CONFIG_SND_INDIGO is not set -# CONFIG_SND_INDIGOIO is not set -# CONFIG_SND_INDIGODJ is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_HDA_INTEL is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_HIFIER is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -CONFIG_SND_INTEL8X0=y -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_PCXHR is not set -# CONFIG_SND_RIPTIDE is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VIRTUOSO is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_YMFPCI is not set -CONFIG_SND_PPC=y -CONFIG_SND_USB=y -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_USX2Y is not set -# CONFIG_SND_USB_CAIAQ is not set -# CONFIG_SND_SOC is not set -# CONFIG_SOUND_PRIME is not set -CONFIG_AC97_BUS=y -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_HID_PID is not set -# CONFIG_USB_HIDDEV is not set - -# -# Special HID drivers -# -CONFIG_HID_COMPAT=y -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y -# CONFIG_LOGITECH_FF is not set -# CONFIG_LOGIRUMBLEPAD2_FF is not set -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -# CONFIG_HID_NTRIG is not set -CONFIG_HID_PANTHERLORD=y -# CONFIG_PANTHERLORD_FF is not set -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set -# CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -CONFIG_USB_MON=y -# CONFIG_USB_WUSB is not set -# CONFIG_USB_WUSB_CBAF is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_C67X00_HCD is not set -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -# CONFIG_USB_EHCI_TT_NEWSCHED is not set -CONFIG_USB_EHCI_FSL=y -CONFIG_USB_EHCI_HCD_PPC_OF=y -# CONFIG_USB_OXU210HP_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y -CONFIG_USB_OHCI_HCD_PPC_OF_BE=y -CONFIG_USB_OHCI_HCD_PPC_OF_LE=y -CONFIG_USB_OHCI_HCD_PCI=y -CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y -CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_WHCI_HCD is not set -# CONFIG_USB_HWA_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_WDM is not set -# CONFIG_USB_TMC is not set - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; -# - -# -# see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB port drivers -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_SEVSEG is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set -# CONFIG_USB_GADGET is not set - -# -# OTG and related infrastructure -# -# CONFIG_UWB is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8581 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -CONFIG_RTC_DRV_CMOS=y -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -# CONFIG_RTC_DRV_PPC is not set -CONFIG_DMADEVICES=y - -# -# DMA Devices -# -CONFIG_FSL_DMA=y -CONFIG_DMA_ENGINE=y - -# -# DMA Clients -# -# CONFIG_NET_DMA is not set -# CONFIG_DMATEST is not set -# CONFIG_UIO is not set -# CONFIG_STAGING is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4_FS is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set -CONFIG_DNOTIFY=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -CONFIG_NTFS_FS=y -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set -CONFIG_MISC_FILESYSTEMS=y -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_CRAMFS=y -# CONFIG_SQUASHFS is not set -CONFIG_VXFS_FS=m -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -# CONFIG_ROMFS_FS is not set -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -# CONFIG_UFS_DEBUG is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=y -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_V4 is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=m -# CONFIG_DLM is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=m -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_HAVE_LMB=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -CONFIG_DEBUG_FS=y -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -CONFIG_PRINT_STACK_DEPTH=64 -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_CODE_PATCHING_SELFTEST is not set -# CONFIG_FTR_FIXUP_SELFTEST is not set -# CONFIG_MSI_BITMAP_SELFTEST is not set -# CONFIG_XMON is not set -# CONFIG_IRQSTACKS is not set -# CONFIG_VIRQ_DEBUG is not set -# CONFIG_BDI_SWITCH is not set -# CONFIG_PPC_EARLY_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -# CONFIG_CRYPTO_FIPS is not set -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_AUTHENC=y -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set - -# -# Block modes -# -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_LRW is not set -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_XCBC is not set - -# -# Digest -# -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -CONFIG_CRYPTO_SHA1=m -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set - -# -# Random Number Generation -# -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_HW=y -# CONFIG_CRYPTO_DEV_HIFN_795X is not set -CONFIG_CRYPTO_DEV_TALITOS=y -# CONFIG_PPC_CLOCK is not set -# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig deleted file mode 100644 index f6fa0b761cb3..000000000000 --- a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig +++ /dev/null @@ -1,1802 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:07 2009 -# -# CONFIG_PPC64 is not set - -# -# Processor support -# -# CONFIG_6xx is not set -CONFIG_PPC_85xx=y -# CONFIG_PPC_8xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_E200 is not set -CONFIG_E500=y -# CONFIG_PPC_E500MC is not set -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -CONFIG_PPC_MMU_NOHASH=y -# CONFIG_PPC_MM_SLICES is not set -# CONFIG_SMP is not set -CONFIG_PPC32=y -CONFIG_WORD_SIZE=32 -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_MMU=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set -CONFIG_IRQ_PER_CPU=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_ARCH_HAS_ILOG2_U32=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -# CONFIG_ARCH_NO_VIRT_TO_BUS is not set -CONFIG_PPC=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_PPC_OF=y -CONFIG_OF=y -CONFIG_PPC_UDBG_16550=y -# CONFIG_GENERIC_TBSYNC is not set -CONFIG_AUDIT_ARCH=y -CONFIG_GENERIC_BUG=y -CONFIG_DEFAULT_UIMAGE=y -# CONFIG_PPC_DCR_NATIVE is not set -# CONFIG_PPC_DCR_MMIO is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_TASKSTATS is not set -CONFIG_AUDIT=y -# CONFIG_AUDITSYSCALL is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -# CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y -CONFIG_SLUB_DEBUG=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set -# CONFIG_FREEZER is not set - -# -# Platform support -# -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_MPC85xx_CDS is not set -# CONFIG_MPC85xx_MDS is not set -# CONFIG_MPC8536_DS is not set -CONFIG_MPC85xx_DS=y -# CONFIG_KSI8560 is not set -# CONFIG_STX_GP3 is not set -# CONFIG_TQM8540 is not set -# CONFIG_TQM8541 is not set -# CONFIG_TQM8548 is not set -# CONFIG_TQM8555 is not set -# CONFIG_TQM8560 is not set -# CONFIG_SBC8548 is not set -# CONFIG_SBC8560 is not set -# CONFIG_IPIC is not set -CONFIG_MPIC=y -# CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_QUICC_ENGINE is not set -# CONFIG_CPM2 is not set -CONFIG_FSL_ULI1575=y -# CONFIG_MPC8xxx_GPIO is not set -# CONFIG_SIMPLE_GPIO is not set - -# -# Kernel options -# -CONFIG_HIGHMEM=y -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_SCHED_HRTICK=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_HAVE_AOUT is not set -CONFIG_BINFMT_MISC=m -CONFIG_MATH_EMULATION=y -# CONFIG_IOMMU_HELPER is not set -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_HAS_WALK_MEMORY=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MIGRATION=y -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_PPC_4K_PAGES=y -# CONFIG_PPC_16K_PAGES is not set -# CONFIG_PPC_64K_PAGES is not set -CONFIG_FORCE_MAX_ZONEORDER=11 -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_EXTRA_TARGETS="" -# CONFIG_PM is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_ZONE_DMA=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_FSL_SOC=y -CONFIG_FSL_PCI=y -CONFIG_PPC_PCI_CHOICE=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_SYSCALL=y -# CONFIG_PCIEPORTBUS is not set -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set -# CONFIG_PCI_DEBUG is not set -# CONFIG_PCI_STUB is not set -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HAS_RAPIDIO is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_PAGE_OFFSET=0xc0000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 -CONFIG_TASK_SIZE=0xc0000000 -CONFIG_NET=y - -# -# Networking options -# -CONFIG_COMPAT_NET_DEV_OPS=y -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=y -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -CONFIG_NET_KEY=m -# CONFIG_NET_KEY_MIGRATE is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_ASK_IP_FIB_HASH=y -# CONFIG_IP_FIB_TRIE is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=y -CONFIG_NET_IPGRE=y -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_ARPD=y -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -CONFIG_IPV6=y -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_IPV6_MIP6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_INET6_XFRM_MODE_TRANSPORT=y -CONFIG_INET6_XFRM_MODE_TUNNEL=y -CONFIG_INET6_XFRM_MODE_BEET=y -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=y -CONFIG_IPV6_NDISC_NODETYPE=y -# CONFIG_IPV6_TUNNEL is not set -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_IPV6_MROUTE is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_MSG is not set -# CONFIG_SCTP_DBG_OBJCNT is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -CONFIG_SCTP_HMAC_MD5=y -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_NET_DSA is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_FIB_RULES=y -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set -# CONFIG_WIMAX is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set -CONFIG_OF_DEVICE=y -CONFIG_OF_I2C=y -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=131072 -# CONFIG_BLK_DEV_XIP is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_MISC_DEVICES=y -# CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_ICS932S401 is not set -# CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HP_ILO is not set -# CONFIG_C2PORT is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -CONFIG_SCSI_LOGGING=y -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_CXGB3_ISCSI is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_LIBFC is not set -# CONFIG_FCOE is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set -# CONFIG_SCSI_DH is not set -CONFIG_ATA=y -# CONFIG_ATA_NONSTANDARD is not set -CONFIG_SATA_PMP=y -CONFIG_SATA_AHCI=y -# CONFIG_SATA_SIL24 is not set -# CONFIG_SATA_FSL is not set -CONFIG_ATA_SFF=y -# CONFIG_SATA_SVW is not set -# CONFIG_ATA_PIIX is not set -# CONFIG_SATA_MV is not set -# CONFIG_SATA_NV is not set -# CONFIG_PDC_ADMA is not set -# CONFIG_SATA_QSTOR is not set -# CONFIG_SATA_PROMISE is not set -# CONFIG_SATA_SX4 is not set -# CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIS is not set -# CONFIG_SATA_ULI is not set -# CONFIG_SATA_VIA is not set -# CONFIG_SATA_VITESSE is not set -# CONFIG_SATA_INIC162X is not set -CONFIG_PATA_ALI=y -# CONFIG_PATA_AMD is not set -# CONFIG_PATA_ARTOP is not set -# CONFIG_PATA_ATIIXP is not set -# CONFIG_PATA_CMD640_PCI is not set -# CONFIG_PATA_CMD64X is not set -# CONFIG_PATA_CS5520 is not set -# CONFIG_PATA_CS5530 is not set -# CONFIG_PATA_CYPRESS is not set -# CONFIG_PATA_EFAR is not set -# CONFIG_ATA_GENERIC is not set -# CONFIG_PATA_HPT366 is not set -# CONFIG_PATA_HPT37X is not set -# CONFIG_PATA_HPT3X2N is not set -# CONFIG_PATA_HPT3X3 is not set -# CONFIG_PATA_IT821X is not set -# CONFIG_PATA_IT8213 is not set -# CONFIG_PATA_JMICRON is not set -# CONFIG_PATA_TRIFLEX is not set -# CONFIG_PATA_MARVELL is not set -# CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_OLDPIIX is not set -# CONFIG_PATA_NETCELL is not set -# CONFIG_PATA_NINJA32 is not set -# CONFIG_PATA_NS87410 is not set -# CONFIG_PATA_NS87415 is not set -# CONFIG_PATA_OPTI is not set -# CONFIG_PATA_OPTIDMA is not set -# CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_RADISYS is not set -# CONFIG_PATA_RZ1000 is not set -# CONFIG_PATA_SC1200 is not set -# CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set -# CONFIG_PATA_SIL680 is not set -# CONFIG_PATA_SIS is not set -# CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set -# CONFIG_PATA_PLATFORM is not set -# CONFIG_PATA_SCH is not set -# CONFIG_MD is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# Enable only one of the two stacks, unless you know what you are doing -# -# CONFIG_FIREWIRE is not set -# CONFIG_IEEE1394 is not set -# CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_ARCNET is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -CONFIG_VITESSE_PHY=y -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_NET_PCI is not set -# CONFIG_B44 is not set -# CONFIG_ATL2 is not set -CONFIG_NETDEV_1000=y -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_E1000E is not set -# CONFIG_IP1000 is not set -# CONFIG_IGB is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_GIANFAR=y -# CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -# CONFIG_ATL1E is not set -# CONFIG_JME is not set -CONFIG_NETDEV_10000=y -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3_DEPENDS=y -# CONFIG_CHELSIO_T3 is not set -# CONFIG_ENIC is not set -# CONFIG_IXGBE is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set -# CONFIG_NIU is not set -# CONFIG_MLX4_EN is not set -# CONFIG_MLX4_CORE is not set -# CONFIG_TEHUTI is not set -# CONFIG_BNX2X is not set -# CONFIG_QLGE is not set -# CONFIG_SFC is not set -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -CONFIG_INPUT_FF_MEMLESS=m -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_SERIO_XILINX_XPS_PS2 is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_NOZOMI is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_HVC_UDBG is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -CONFIG_NVRAM=y -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_CHARDEV is not set -CONFIG_I2C_HELPER_AUTO=y - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_ISCH is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -CONFIG_I2C_MPC=y -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_SIMTEC is not set - -# -# External I2C/SMBus adapter drivers -# -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# -# Other I2C/SMBus bus drivers -# -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set -# CONFIG_WATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_TWL4030_CORE is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_PMIC_DA903X is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_PCF50633 is not set -# CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -CONFIG_DVB_CORE=m -CONFIG_VIDEO_MEDIA=m - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -# CONFIG_DVB_DYNAMIC_MINORS is not set -CONFIG_DVB_CAPTURE_DRIVERS=y - -# -# Supported SAA7146 based PCI Adapters -# -# CONFIG_TTPCI_EEPROM is not set -# CONFIG_DVB_BUDGET_CORE is not set - -# -# Supported USB Adapters -# -# CONFIG_DVB_USB is not set -# CONFIG_DVB_TTUSB_BUDGET is not set -# CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_SIANO_SMS1XXX is not set - -# -# Supported FlexCopII (B2C2) Adapters -# -# CONFIG_DVB_B2C2_FLEXCOP is not set - -# -# Supported BT878 Adapters -# - -# -# Supported Pluto2 Adapters -# -# CONFIG_DVB_PLUTO2 is not set - -# -# Supported SDMC DM1105 Adapters -# -# CONFIG_DVB_DM1105 is not set - -# -# Supported DVB Frontends -# - -# -# Customise DVB Frontends -# -# CONFIG_DVB_FE_CUSTOMISE is not set - -# -# Multistandard (satellite) frontends -# -# CONFIG_DVB_STB0899 is not set -# CONFIG_DVB_STB6100 is not set - -# -# DVB-S (satellite) frontends -# -# CONFIG_DVB_CX24110 is not set -# CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_MT312 is not set -# CONFIG_DVB_S5H1420 is not set -# CONFIG_DVB_STV0288 is not set -# CONFIG_DVB_STB6000 is not set -# CONFIG_DVB_STV0299 is not set -# CONFIG_DVB_TDA8083 is not set -# CONFIG_DVB_TDA10086 is not set -# CONFIG_DVB_TDA8261 is not set -# CONFIG_DVB_VES1X93 is not set -# CONFIG_DVB_TUNER_ITD1000 is not set -# CONFIG_DVB_TUNER_CX24113 is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TUA6100 is not set -# CONFIG_DVB_CX24116 is not set -# CONFIG_DVB_SI21XX is not set - -# -# DVB-T (terrestrial) frontends -# -# CONFIG_DVB_SP8870 is not set -# CONFIG_DVB_SP887X is not set -# CONFIG_DVB_CX22700 is not set -# CONFIG_DVB_CX22702 is not set -# CONFIG_DVB_DRX397XD is not set -# CONFIG_DVB_L64781 is not set -# CONFIG_DVB_TDA1004X is not set -# CONFIG_DVB_NXT6000 is not set -# CONFIG_DVB_MT352 is not set -# CONFIG_DVB_ZL10353 is not set -# CONFIG_DVB_DIB3000MB is not set -# CONFIG_DVB_DIB3000MC is not set -# CONFIG_DVB_DIB7000M is not set -# CONFIG_DVB_DIB7000P is not set -# CONFIG_DVB_TDA10048 is not set - -# -# DVB-C (cable) frontends -# -# CONFIG_DVB_VES1820 is not set -# CONFIG_DVB_TDA10021 is not set -# CONFIG_DVB_TDA10023 is not set -# CONFIG_DVB_STV0297 is not set - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -# CONFIG_DVB_NXT200X is not set -# CONFIG_DVB_OR51211 is not set -# CONFIG_DVB_OR51132 is not set -# CONFIG_DVB_BCM3510 is not set -# CONFIG_DVB_LGDT330X is not set -# CONFIG_DVB_LGDT3304 is not set -# CONFIG_DVB_S5H1409 is not set -# CONFIG_DVB_AU8522 is not set -# CONFIG_DVB_S5H1411 is not set - -# -# ISDB-T (terrestrial) frontends -# -# CONFIG_DVB_S921 is not set - -# -# Digital terrestrial only tuners/PLL -# -# CONFIG_DVB_PLL is not set -# CONFIG_DVB_TUNER_DIB0070 is not set - -# -# SEC control devices for DVB-S -# -# CONFIG_DVB_LNBP21 is not set -# CONFIG_DVB_ISL6405 is not set -# CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_LGS8GL5 is not set - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set -# CONFIG_DVB_AF9013 is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VGACON_SOFT_SCROLLBACK is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_SOUND=y -CONFIG_SOUND_OSS_CORE=y -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -# CONFIG_SND_SEQUENCER is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_PCM_OSS_PLUGINS=y -# CONFIG_SND_HRTIMER is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -# CONFIG_SND_SUPPORT_OLD_API is not set -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -CONFIG_SND_VMASTER=y -CONFIG_SND_AC97_CODEC=y -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -# CONFIG_SND_AC97_POWER_SAVE is not set -CONFIG_SND_PCI=y -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS300 is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AW2 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_OXYGEN is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_CS5530 is not set -# CONFIG_SND_DARLA20 is not set -# CONFIG_SND_GINA20 is not set -# CONFIG_SND_LAYLA20 is not set -# CONFIG_SND_DARLA24 is not set -# CONFIG_SND_GINA24 is not set -# CONFIG_SND_LAYLA24 is not set -# CONFIG_SND_MONA is not set -# CONFIG_SND_MIA is not set -# CONFIG_SND_ECHO3G is not set -# CONFIG_SND_INDIGO is not set -# CONFIG_SND_INDIGOIO is not set -# CONFIG_SND_INDIGODJ is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_HDA_INTEL is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_HIFIER is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -CONFIG_SND_INTEL8X0=y -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_PCXHR is not set -# CONFIG_SND_RIPTIDE is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VIRTUOSO is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_YMFPCI is not set -CONFIG_SND_PPC=y -CONFIG_SND_USB=y -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_USX2Y is not set -# CONFIG_SND_USB_CAIAQ is not set -# CONFIG_SND_SOC is not set -# CONFIG_SOUND_PRIME is not set -CONFIG_AC97_BUS=y -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_HID_PID is not set -# CONFIG_USB_HIDDEV is not set - -# -# Special HID drivers -# -CONFIG_HID_COMPAT=y -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y -# CONFIG_LOGITECH_FF is not set -# CONFIG_LOGIRUMBLEPAD2_FF is not set -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -# CONFIG_HID_NTRIG is not set -CONFIG_HID_PANTHERLORD=y -# CONFIG_PANTHERLORD_FF is not set -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set -# CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -CONFIG_USB_MON=y -# CONFIG_USB_WUSB is not set -# CONFIG_USB_WUSB_CBAF is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_C67X00_HCD is not set -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_EHCI_FSL is not set -CONFIG_USB_EHCI_HCD_PPC_OF=y -# CONFIG_USB_OXU210HP_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y -CONFIG_USB_OHCI_HCD_PPC_OF_BE=y -CONFIG_USB_OHCI_HCD_PPC_OF_LE=y -CONFIG_USB_OHCI_HCD_PCI=y -CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y -CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_WHCI_HCD is not set -# CONFIG_USB_HWA_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_WDM is not set -# CONFIG_USB_TMC is not set - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; -# - -# -# see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB port drivers -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_SEVSEG is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set -# CONFIG_USB_GADGET is not set - -# -# OTG and related infrastructure -# -# CONFIG_UWB is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8581 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -CONFIG_RTC_DRV_CMOS=y -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -# CONFIG_RTC_DRV_PPC is not set -CONFIG_DMADEVICES=y - -# -# DMA Devices -# -CONFIG_FSL_DMA=y -CONFIG_DMA_ENGINE=y - -# -# DMA Clients -# -# CONFIG_NET_DMA is not set -# CONFIG_DMATEST is not set -# CONFIG_UIO is not set -# CONFIG_STAGING is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4_FS is not set -CONFIG_JBD=y -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set -CONFIG_DNOTIFY=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -CONFIG_NTFS_FS=y -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set -CONFIG_MISC_FILESYSTEMS=y -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_CRAMFS=y -# CONFIG_SQUASHFS is not set -CONFIG_VXFS_FS=m -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -# CONFIG_ROMFS_FS is not set -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -# CONFIG_UFS_DEBUG is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=y -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_V4 is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=m -# CONFIG_DLM is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=m -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_HAVE_LMB=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -CONFIG_PRINT_STACK_DEPTH=64 -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_CODE_PATCHING_SELFTEST is not set -# CONFIG_FTR_FIXUP_SELFTEST is not set -# CONFIG_MSI_BITMAP_SELFTEST is not set -# CONFIG_XMON is not set -# CONFIG_IRQSTACKS is not set -# CONFIG_BDI_SWITCH is not set -# CONFIG_PPC_EARLY_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -# CONFIG_CRYPTO_FIPS is not set -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_AUTHENC=y -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set - -# -# Block modes -# -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_LRW is not set -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_XCBC is not set - -# -# Digest -# -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -CONFIG_CRYPTO_SHA1=m -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set - -# -# Random Number Generation -# -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_HW=y -# CONFIG_CRYPTO_DEV_HIFN_795X is not set -CONFIG_CRYPTO_DEV_TALITOS=y -# CONFIG_PPC_CLOCK is not set -# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc8568mds_defconfig b/arch/powerpc/configs/85xx/mpc8568mds_defconfig deleted file mode 100644 index 186c1010a135..000000000000 --- a/arch/powerpc/configs/85xx/mpc8568mds_defconfig +++ /dev/null @@ -1,1309 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:10 2009 -# -# CONFIG_PPC64 is not set - -# -# Processor support -# -# CONFIG_6xx is not set -CONFIG_PPC_85xx=y -# CONFIG_PPC_8xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_E200 is not set -CONFIG_E500=y -# CONFIG_PPC_E500MC is not set -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -CONFIG_PPC_MMU_NOHASH=y -# CONFIG_PPC_MM_SLICES is not set -# CONFIG_SMP is not set -CONFIG_PPC32=y -CONFIG_WORD_SIZE=32 -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_MMU=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set -CONFIG_IRQ_PER_CPU=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_ARCH_HAS_ILOG2_U32=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -# CONFIG_ARCH_NO_VIRT_TO_BUS is not set -CONFIG_PPC=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_PPC_OF=y -CONFIG_OF=y -CONFIG_PPC_UDBG_16550=y -# CONFIG_GENERIC_TBSYNC is not set -CONFIG_AUDIT_ARCH=y -CONFIG_GENERIC_BUG=y -CONFIG_DEFAULT_UIMAGE=y -# CONFIG_PPC_DCR_NATIVE is not set -# CONFIG_PPC_DCR_MMIO is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -# CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -# CONFIG_KALLSYMS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -# CONFIG_EPOLL is not set -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y -CONFIG_SLUB_DEBUG=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set -# CONFIG_FREEZER is not set - -# -# Platform support -# -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_MPC85xx_CDS is not set -CONFIG_MPC85xx_MDS=y -# CONFIG_MPC8536_DS is not set -# CONFIG_MPC85xx_DS is not set -# CONFIG_KSI8560 is not set -# CONFIG_STX_GP3 is not set -# CONFIG_TQM8540 is not set -# CONFIG_TQM8541 is not set -# CONFIG_TQM8548 is not set -# CONFIG_TQM8555 is not set -# CONFIG_TQM8560 is not set -# CONFIG_SBC8548 is not set -# CONFIG_SBC8560 is not set -# CONFIG_IPIC is not set -CONFIG_MPIC=y -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -CONFIG_QUICC_ENGINE=y -# CONFIG_QE_GPIO is not set -# CONFIG_CPM2 is not set -# CONFIG_FSL_ULI1575 is not set -# CONFIG_MPC8xxx_GPIO is not set -# CONFIG_SIMPLE_GPIO is not set - -# -# Kernel options -# -# CONFIG_HIGHMEM is not set -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_SCHED_HRTICK=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_HAVE_AOUT is not set -# CONFIG_BINFMT_MISC is not set -CONFIG_MATH_EMULATION=y -# CONFIG_IOMMU_HELPER is not set -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_HAS_WALK_MEMORY=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MIGRATION=y -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_PPC_4K_PAGES=y -# CONFIG_PPC_16K_PAGES is not set -# CONFIG_PPC_64K_PAGES is not set -CONFIG_FORCE_MAX_ZONEORDER=11 -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_EXTRA_TARGETS="" -# CONFIG_PM is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_ZONE_DMA=y -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_FSL_SOC=y -CONFIG_FSL_PCI=y -CONFIG_PPC_PCI_CHOICE=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_SYSCALL=y -# CONFIG_PCIEPORTBUS is not set -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set -# CONFIG_PCI_DEBUG is not set -# CONFIG_PCI_STUB is not set -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HAS_RAPIDIO is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_PAGE_OFFSET=0xc0000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 -CONFIG_TASK_SIZE=0xc0000000 -CONFIG_NET=y - -# -# Networking options -# -CONFIG_COMPAT_NET_DEV_OPS=y -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_NET_DSA is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set -# CONFIG_WIMAX is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set -CONFIG_OF_DEVICE=y -CONFIG_OF_I2C=y -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=32768 -# CONFIG_BLK_DEV_XIP is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_MISC_DEVICES=y -# CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_ICS932S401 is not set -# CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HP_ILO is not set -# CONFIG_C2PORT is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -# CONFIG_BLK_DEV_SD is not set -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_CXGB3_ISCSI is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_LIBFC is not set -# CONFIG_FCOE is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set -# CONFIG_SCSI_DH is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# Enable only one of the two stacks, unless you know what you are doing -# -# CONFIG_FIREWIRE is not set -# CONFIG_IEEE1394 is not set -# CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_ARCNET is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -CONFIG_MARVELL_PHY=y -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_NET_PCI is not set -# CONFIG_B44 is not set -# CONFIG_ATL2 is not set -CONFIG_NETDEV_1000=y -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_E1000E is not set -# CONFIG_IP1000 is not set -# CONFIG_IGB is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_GIANFAR=y -# CONFIG_UCC_GETH is not set -# CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -# CONFIG_ATL1E is not set -# CONFIG_JME is not set -CONFIG_NETDEV_10000=y -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3_DEPENDS=y -# CONFIG_CHELSIO_T3 is not set -# CONFIG_ENIC is not set -# CONFIG_IXGBE is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set -# CONFIG_NIU is not set -# CONFIG_MLX4_EN is not set -# CONFIG_MLX4_CORE is not set -# CONFIG_TEHUTI is not set -# CONFIG_BNX2X is not set -# CONFIG_QLGE is not set -# CONFIG_SFC is not set -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_NOZOMI is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set -CONFIG_SERIAL_8250_SHARE_IRQ=y - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set -# CONFIG_SERIAL_QE is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_HVC_UDBG is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_HELPER_AUTO=y - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_ISCH is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -CONFIG_I2C_MPC=y -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_SIMTEC is not set - -# -# External I2C/SMBus adapter drivers -# -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_TAOS_EVM is not set - -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# -# Other I2C/SMBus bus drivers -# -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_AD7414 is not set -# CONFIG_SENSORS_AD7418 is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1029 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ADT7462 is not set -# CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_ADT7475 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_I5K_AMB is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_F71882FG is not set -# CONFIG_SENSORS_F75375S is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_LM93 is not set -# CONFIG_SENSORS_LTC4245 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_MAX6650 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_DME1737 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47M192 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_ADS7828 is not set -# CONFIG_SENSORS_THMC50 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_VT8231 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83791D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83793 is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83L786NG is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set -# CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -# CONFIG_ALIM7101_WDT is not set -# CONFIG_BOOKE_WDT is not set - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_TWL4030_CORE is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_PMIC_DA903X is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_PCF50633 is not set -# CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y - -# -# Graphics support -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=m -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_SOUND is not set -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set -# CONFIG_HID_PID is not set - -# -# Special HID drivers -# -CONFIG_HID_COMPAT=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set - -# -# Enable Host or Gadget support to see Inventra options -# - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; -# -# CONFIG_USB_GADGET is not set - -# -# OTG and related infrastructure -# -# CONFIG_UWB is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -CONFIG_RTC_DRV_DS1374=y -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8581 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -# CONFIG_RTC_DRV_PPC is not set -# CONFIG_DMADEVICES is not set -# CONFIG_UIO is not set -# CONFIG_STAGING is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4_FS is not set -CONFIG_JBD=y -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set -CONFIG_DNOTIFY=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set -CONFIG_MISC_FILESYSTEMS=y -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_SQUASHFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -# CONFIG_NFSD is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -# CONFIG_NLS is not set -# CONFIG_DLM is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_HAVE_LMB=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -CONFIG_PRINT_STACK_DEPTH=64 -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_CODE_PATCHING_SELFTEST is not set -# CONFIG_FTR_FIXUP_SELFTEST is not set -# CONFIG_MSI_BITMAP_SELFTEST is not set -# CONFIG_XMON is not set -# CONFIG_IRQSTACKS is not set -# CONFIG_BDI_SWITCH is not set -CONFIG_PPC_EARLY_DEBUG=y -# CONFIG_PPC_EARLY_DEBUG_LPAR is not set -# CONFIG_PPC_EARLY_DEBUG_G5 is not set -# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set -# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set -# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set -# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set -# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set -# CONFIG_PPC_EARLY_DEBUG_BEAT is not set -# CONFIG_PPC_EARLY_DEBUG_44x is not set -# CONFIG_PPC_EARLY_DEBUG_40x is not set -# CONFIG_PPC_EARLY_DEBUG_CPM is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -# CONFIG_CRYPTO_FIPS is not set -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set - -# -# Block modes -# -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -CONFIG_CRYPTO_ECB=m -# CONFIG_CRYPTO_LRW is not set -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_XCBC is not set - -# -# Digest -# -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set - -# -# Random Number Generation -# -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_HW=y -# CONFIG_CRYPTO_DEV_HIFN_795X is not set -# CONFIG_CRYPTO_DEV_TALITOS is not set -# CONFIG_PPC_CLOCK is not set -CONFIG_PPC_LIB_RHEAP=y -# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig deleted file mode 100644 index 813223ae174d..000000000000 --- a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig +++ /dev/null @@ -1,1794 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:12 2009 -# -# CONFIG_PPC64 is not set - -# -# Processor support -# -# CONFIG_6xx is not set -CONFIG_PPC_85xx=y -# CONFIG_PPC_8xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_E200 is not set -CONFIG_E500=y -# CONFIG_PPC_E500MC is not set -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -CONFIG_PPC_MMU_NOHASH=y -# CONFIG_PPC_MM_SLICES is not set -CONFIG_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_PPC32=y -CONFIG_WORD_SIZE=32 -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_MMU=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set -CONFIG_IRQ_PER_CPU=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_ARCH_HAS_ILOG2_U32=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -# CONFIG_ARCH_NO_VIRT_TO_BUS is not set -CONFIG_PPC=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_PPC_OF=y -CONFIG_OF=y -CONFIG_PPC_UDBG_16550=y -CONFIG_GENERIC_TBSYNC=y -CONFIG_AUDIT_ARCH=y -CONFIG_GENERIC_BUG=y -CONFIG_DEFAULT_UIMAGE=y -# CONFIG_PPC_DCR_NATIVE is not set -# CONFIG_PPC_DCR_MMIO is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_TASKSTATS is not set -CONFIG_AUDIT=y -# CONFIG_AUDITSYSCALL is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -# CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y -CONFIG_SLUB_DEBUG=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_USE_GENERIC_SMP_HELPERS=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_STOP_MACHINE=y -CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set -# CONFIG_FREEZER is not set - -# -# Platform support -# -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_MPC85xx_CDS is not set -# CONFIG_MPC85xx_MDS is not set -# CONFIG_MPC8536_DS is not set -CONFIG_MPC85xx_DS=y -# CONFIG_KSI8560 is not set -# CONFIG_STX_GP3 is not set -# CONFIG_TQM8540 is not set -# CONFIG_TQM8541 is not set -# CONFIG_TQM8548 is not set -# CONFIG_TQM8555 is not set -# CONFIG_TQM8560 is not set -# CONFIG_SBC8548 is not set -# CONFIG_SBC8560 is not set -# CONFIG_IPIC is not set -CONFIG_MPIC=y -# CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_QUICC_ENGINE is not set -# CONFIG_CPM2 is not set -CONFIG_FSL_ULI1575=y -# CONFIG_MPC8xxx_GPIO is not set -# CONFIG_SIMPLE_GPIO is not set - -# -# Kernel options -# -CONFIG_HIGHMEM=y -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_SCHED_HRTICK=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_HAVE_AOUT is not set -CONFIG_BINFMT_MISC=m -CONFIG_MATH_EMULATION=y -# CONFIG_IOMMU_HELPER is not set -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_HAS_WALK_MEMORY=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y -# CONFIG_IRQ_ALL_CPUS is not set -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MIGRATION=y -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_PPC_4K_PAGES=y -# CONFIG_PPC_16K_PAGES is not set -# CONFIG_PPC_64K_PAGES is not set -CONFIG_FORCE_MAX_ZONEORDER=11 -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_EXTRA_TARGETS="" -# CONFIG_PM is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_ZONE_DMA=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_FSL_SOC=y -CONFIG_FSL_PCI=y -CONFIG_PPC_PCI_CHOICE=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_SYSCALL=y -# CONFIG_PCIEPORTBUS is not set -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set -# CONFIG_PCI_DEBUG is not set -# CONFIG_PCI_STUB is not set -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HAS_RAPIDIO is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_PAGE_OFFSET=0xc0000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 -CONFIG_TASK_SIZE=0xc0000000 -CONFIG_NET=y - -# -# Networking options -# -CONFIG_COMPAT_NET_DEV_OPS=y -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=y -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -CONFIG_NET_KEY=m -# CONFIG_NET_KEY_MIGRATE is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_ASK_IP_FIB_HASH=y -# CONFIG_IP_FIB_TRIE is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=y -CONFIG_NET_IPGRE=y -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_ARPD=y -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -CONFIG_IPV6=y -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_IPV6_MIP6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_INET6_XFRM_MODE_TRANSPORT=y -CONFIG_INET6_XFRM_MODE_TUNNEL=y -CONFIG_INET6_XFRM_MODE_BEET=y -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=y -CONFIG_IPV6_NDISC_NODETYPE=y -# CONFIG_IPV6_TUNNEL is not set -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_IPV6_MROUTE is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_MSG is not set -# CONFIG_SCTP_DBG_OBJCNT is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -CONFIG_SCTP_HMAC_MD5=y -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_NET_DSA is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_FIB_RULES=y -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set -# CONFIG_WIMAX is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set -CONFIG_OF_DEVICE=y -CONFIG_OF_I2C=y -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=131072 -# CONFIG_BLK_DEV_XIP is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_MISC_DEVICES=y -# CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_ICS932S401 is not set -# CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HP_ILO is not set -# CONFIG_C2PORT is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -CONFIG_SCSI_LOGGING=y -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_CXGB3_ISCSI is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_LIBFC is not set -# CONFIG_FCOE is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set -# CONFIG_SCSI_DH is not set -CONFIG_ATA=y -# CONFIG_ATA_NONSTANDARD is not set -CONFIG_SATA_PMP=y -CONFIG_SATA_AHCI=y -# CONFIG_SATA_SIL24 is not set -# CONFIG_SATA_FSL is not set -CONFIG_ATA_SFF=y -# CONFIG_SATA_SVW is not set -# CONFIG_ATA_PIIX is not set -# CONFIG_SATA_MV is not set -# CONFIG_SATA_NV is not set -# CONFIG_PDC_ADMA is not set -# CONFIG_SATA_QSTOR is not set -# CONFIG_SATA_PROMISE is not set -# CONFIG_SATA_SX4 is not set -# CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIS is not set -# CONFIG_SATA_ULI is not set -# CONFIG_SATA_VIA is not set -# CONFIG_SATA_VITESSE is not set -# CONFIG_SATA_INIC162X is not set -CONFIG_PATA_ALI=y -# CONFIG_PATA_AMD is not set -# CONFIG_PATA_ARTOP is not set -# CONFIG_PATA_ATIIXP is not set -# CONFIG_PATA_CMD640_PCI is not set -# CONFIG_PATA_CMD64X is not set -# CONFIG_PATA_CS5520 is not set -# CONFIG_PATA_CS5530 is not set -# CONFIG_PATA_CYPRESS is not set -# CONFIG_PATA_EFAR is not set -# CONFIG_ATA_GENERIC is not set -# CONFIG_PATA_HPT366 is not set -# CONFIG_PATA_HPT37X is not set -# CONFIG_PATA_HPT3X2N is not set -# CONFIG_PATA_HPT3X3 is not set -# CONFIG_PATA_IT821X is not set -# CONFIG_PATA_IT8213 is not set -# CONFIG_PATA_JMICRON is not set -# CONFIG_PATA_TRIFLEX is not set -# CONFIG_PATA_MARVELL is not set -# CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_OLDPIIX is not set -# CONFIG_PATA_NETCELL is not set -# CONFIG_PATA_NINJA32 is not set -# CONFIG_PATA_NS87410 is not set -# CONFIG_PATA_NS87415 is not set -# CONFIG_PATA_OPTI is not set -# CONFIG_PATA_OPTIDMA is not set -# CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_RADISYS is not set -# CONFIG_PATA_RZ1000 is not set -# CONFIG_PATA_SC1200 is not set -# CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set -# CONFIG_PATA_SIL680 is not set -# CONFIG_PATA_SIS is not set -# CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set -# CONFIG_PATA_PLATFORM is not set -# CONFIG_PATA_SCH is not set -# CONFIG_MD is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# Enable only one of the two stacks, unless you know what you are doing -# -# CONFIG_FIREWIRE is not set -# CONFIG_IEEE1394 is not set -# CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_ARCNET is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -CONFIG_VITESSE_PHY=y -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_NET_PCI is not set -# CONFIG_B44 is not set -# CONFIG_ATL2 is not set -CONFIG_NETDEV_1000=y -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_E1000E is not set -# CONFIG_IP1000 is not set -# CONFIG_IGB is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_GIANFAR=y -# CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -# CONFIG_ATL1E is not set -# CONFIG_JME is not set -CONFIG_NETDEV_10000=y -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3_DEPENDS=y -# CONFIG_CHELSIO_T3 is not set -# CONFIG_ENIC is not set -# CONFIG_IXGBE is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set -# CONFIG_NIU is not set -# CONFIG_MLX4_EN is not set -# CONFIG_MLX4_CORE is not set -# CONFIG_TEHUTI is not set -# CONFIG_BNX2X is not set -# CONFIG_QLGE is not set -# CONFIG_SFC is not set -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -CONFIG_INPUT_FF_MEMLESS=m -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_SERIO_XILINX_XPS_PS2 is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_NOZOMI is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_HVC_UDBG is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -CONFIG_NVRAM=y -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_CHARDEV is not set -CONFIG_I2C_HELPER_AUTO=y - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_ISCH is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -CONFIG_I2C_MPC=y -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_SIMTEC is not set - -# -# External I2C/SMBus adapter drivers -# -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# -# Other I2C/SMBus bus drivers -# -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set -# CONFIG_WATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_TWL4030_CORE is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_PMIC_DA903X is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_PCF50633 is not set -# CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -CONFIG_DVB_CORE=m -CONFIG_VIDEO_MEDIA=m - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -# CONFIG_DVB_DYNAMIC_MINORS is not set -CONFIG_DVB_CAPTURE_DRIVERS=y - -# -# Supported SAA7146 based PCI Adapters -# -# CONFIG_TTPCI_EEPROM is not set -# CONFIG_DVB_BUDGET_CORE is not set - -# -# Supported USB Adapters -# -# CONFIG_DVB_USB is not set -# CONFIG_DVB_TTUSB_BUDGET is not set -# CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_SIANO_SMS1XXX is not set - -# -# Supported FlexCopII (B2C2) Adapters -# -# CONFIG_DVB_B2C2_FLEXCOP is not set - -# -# Supported BT878 Adapters -# - -# -# Supported Pluto2 Adapters -# -# CONFIG_DVB_PLUTO2 is not set - -# -# Supported SDMC DM1105 Adapters -# -# CONFIG_DVB_DM1105 is not set - -# -# Supported DVB Frontends -# - -# -# Customise DVB Frontends -# -# CONFIG_DVB_FE_CUSTOMISE is not set - -# -# Multistandard (satellite) frontends -# -# CONFIG_DVB_STB0899 is not set -# CONFIG_DVB_STB6100 is not set - -# -# DVB-S (satellite) frontends -# -# CONFIG_DVB_CX24110 is not set -# CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_MT312 is not set -# CONFIG_DVB_S5H1420 is not set -# CONFIG_DVB_STV0288 is not set -# CONFIG_DVB_STB6000 is not set -# CONFIG_DVB_STV0299 is not set -# CONFIG_DVB_TDA8083 is not set -# CONFIG_DVB_TDA10086 is not set -# CONFIG_DVB_TDA8261 is not set -# CONFIG_DVB_VES1X93 is not set -# CONFIG_DVB_TUNER_ITD1000 is not set -# CONFIG_DVB_TUNER_CX24113 is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TUA6100 is not set -# CONFIG_DVB_CX24116 is not set -# CONFIG_DVB_SI21XX is not set - -# -# DVB-T (terrestrial) frontends -# -# CONFIG_DVB_SP8870 is not set -# CONFIG_DVB_SP887X is not set -# CONFIG_DVB_CX22700 is not set -# CONFIG_DVB_CX22702 is not set -# CONFIG_DVB_DRX397XD is not set -# CONFIG_DVB_L64781 is not set -# CONFIG_DVB_TDA1004X is not set -# CONFIG_DVB_NXT6000 is not set -# CONFIG_DVB_MT352 is not set -# CONFIG_DVB_ZL10353 is not set -# CONFIG_DVB_DIB3000MB is not set -# CONFIG_DVB_DIB3000MC is not set -# CONFIG_DVB_DIB7000M is not set -# CONFIG_DVB_DIB7000P is not set -# CONFIG_DVB_TDA10048 is not set - -# -# DVB-C (cable) frontends -# -# CONFIG_DVB_VES1820 is not set -# CONFIG_DVB_TDA10021 is not set -# CONFIG_DVB_TDA10023 is not set -# CONFIG_DVB_STV0297 is not set - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -# CONFIG_DVB_NXT200X is not set -# CONFIG_DVB_OR51211 is not set -# CONFIG_DVB_OR51132 is not set -# CONFIG_DVB_BCM3510 is not set -# CONFIG_DVB_LGDT330X is not set -# CONFIG_DVB_LGDT3304 is not set -# CONFIG_DVB_S5H1409 is not set -# CONFIG_DVB_AU8522 is not set -# CONFIG_DVB_S5H1411 is not set - -# -# ISDB-T (terrestrial) frontends -# -# CONFIG_DVB_S921 is not set - -# -# Digital terrestrial only tuners/PLL -# -# CONFIG_DVB_PLL is not set -# CONFIG_DVB_TUNER_DIB0070 is not set - -# -# SEC control devices for DVB-S -# -# CONFIG_DVB_LNBP21 is not set -# CONFIG_DVB_ISL6405 is not set -# CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_LGS8GL5 is not set - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set -# CONFIG_DVB_AF9013 is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VGACON_SOFT_SCROLLBACK is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_SOUND=y -CONFIG_SOUND_OSS_CORE=y -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -# CONFIG_SND_SEQUENCER is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_PCM_OSS_PLUGINS=y -# CONFIG_SND_HRTIMER is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -# CONFIG_SND_SUPPORT_OLD_API is not set -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -CONFIG_SND_VMASTER=y -CONFIG_SND_AC97_CODEC=y -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -# CONFIG_SND_AC97_POWER_SAVE is not set -CONFIG_SND_PCI=y -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS300 is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AW2 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_OXYGEN is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_CS5530 is not set -# CONFIG_SND_DARLA20 is not set -# CONFIG_SND_GINA20 is not set -# CONFIG_SND_LAYLA20 is not set -# CONFIG_SND_DARLA24 is not set -# CONFIG_SND_GINA24 is not set -# CONFIG_SND_LAYLA24 is not set -# CONFIG_SND_MONA is not set -# CONFIG_SND_MIA is not set -# CONFIG_SND_ECHO3G is not set -# CONFIG_SND_INDIGO is not set -# CONFIG_SND_INDIGOIO is not set -# CONFIG_SND_INDIGODJ is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_HDA_INTEL is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_HIFIER is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -CONFIG_SND_INTEL8X0=y -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_PCXHR is not set -# CONFIG_SND_RIPTIDE is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VIRTUOSO is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_YMFPCI is not set -CONFIG_SND_PPC=y -CONFIG_SND_USB=y -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_USX2Y is not set -# CONFIG_SND_USB_CAIAQ is not set -# CONFIG_SND_SOC is not set -# CONFIG_SOUND_PRIME is not set -CONFIG_AC97_BUS=y -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_HID_PID is not set -# CONFIG_USB_HIDDEV is not set - -# -# Special HID drivers -# -CONFIG_HID_COMPAT=y -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y -# CONFIG_LOGITECH_FF is not set -# CONFIG_LOGIRUMBLEPAD2_FF is not set -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -# CONFIG_HID_NTRIG is not set -CONFIG_HID_PANTHERLORD=y -# CONFIG_PANTHERLORD_FF is not set -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set -# CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -CONFIG_USB_MON=y -# CONFIG_USB_WUSB is not set -# CONFIG_USB_WUSB_CBAF is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_C67X00_HCD is not set -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_EHCI_FSL is not set -CONFIG_USB_EHCI_HCD_PPC_OF=y -# CONFIG_USB_OXU210HP_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y -CONFIG_USB_OHCI_HCD_PPC_OF_BE=y -CONFIG_USB_OHCI_HCD_PPC_OF_LE=y -CONFIG_USB_OHCI_HCD_PCI=y -CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y -CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_WHCI_HCD is not set -# CONFIG_USB_HWA_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_WDM is not set -# CONFIG_USB_TMC is not set - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; -# - -# -# see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB port drivers -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_SEVSEG is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set -# CONFIG_USB_GADGET is not set - -# -# OTG and related infrastructure -# -# CONFIG_UWB is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8581 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -CONFIG_RTC_DRV_CMOS=y -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -# CONFIG_RTC_DRV_PPC is not set -# CONFIG_DMADEVICES is not set -# CONFIG_UIO is not set -# CONFIG_STAGING is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4_FS is not set -CONFIG_JBD=y -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set -CONFIG_DNOTIFY=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -CONFIG_NTFS_FS=y -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set -CONFIG_MISC_FILESYSTEMS=y -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_CRAMFS=y -# CONFIG_SQUASHFS is not set -CONFIG_VXFS_FS=m -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -# CONFIG_ROMFS_FS is not set -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -# CONFIG_UFS_DEBUG is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=y -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_V4 is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=m -# CONFIG_DLM is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=m -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_HAVE_LMB=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -CONFIG_PRINT_STACK_DEPTH=64 -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_CODE_PATCHING_SELFTEST is not set -# CONFIG_FTR_FIXUP_SELFTEST is not set -# CONFIG_MSI_BITMAP_SELFTEST is not set -# CONFIG_XMON is not set -# CONFIG_IRQSTACKS is not set -# CONFIG_BDI_SWITCH is not set -# CONFIG_PPC_EARLY_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -# CONFIG_CRYPTO_FIPS is not set -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_AUTHENC=y -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set - -# -# Block modes -# -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_LRW is not set -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_XCBC is not set - -# -# Digest -# -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -CONFIG_CRYPTO_SHA1=m -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set - -# -# Random Number Generation -# -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_HW=y -# CONFIG_CRYPTO_DEV_HIFN_795X is not set -CONFIG_CRYPTO_DEV_TALITOS=y -# CONFIG_PPC_CLOCK is not set -# CONFIG_VIRTUALIZATION is not set -- cgit v1.2.2 From 2a3313f494c2f3f74a27d66f0f14b38558b7dba2 Mon Sep 17 00:00:00 2001 From: "Michael K. Johnson" Date: Tue, 21 Apr 2009 21:44:48 -0400 Subject: x86: more than 8 32-bit CPUs requires X86_BIGSMP $ cat x86-more-than-8-cpus-requires-bigsmp.patch Enforce NR_CPUS <= 8 limitation if X86_BIGSMP not set Configuring more than 8 logical CPUs on 32-bit x86 requires X86_BIGSMP to be set in order to boot successfully, if more than 8 logical CPUs are actually found at boot time. The X86_BIGSMP help text describes that it is required to be set if more than 8 CPUs are configured, but this was previously not enforced. This configuration error has affected multiple distributions: https://bugzilla.redhat.com/show_bug.cgi?id=480844 https://issues.rpath.com/browse/RPL-3022 Signed-off-by: Michael K Johnson LKML-Reference: <20090422014448.GB32541@logo.rdu.rpath.com> Signed-off-by: H. Peter Anvin --- arch/x86/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index c9086e6307a5..b5cda6c03d1d 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -664,6 +664,7 @@ config MAXSMP config NR_CPUS int "Maximum number of CPUs" if SMP && !MAXSMP + range 2 8 if SMP && X86_32 && !X86_BIGSMP range 2 512 if SMP && !MAXSMP default "1" if !SMP default "4096" if MAXSMP -- cgit v1.2.2 From 592578a1dd1be0c940e36f769acdd3cc6651a7a1 Mon Sep 17 00:00:00 2001 From: Richard Retanubun Date: Wed, 8 Apr 2009 11:51:27 +1000 Subject: m68knommu: Fixed GPIO pin initialization for CONFIG_M5271 FEC. This processor only have one FEC and its MDIO pins are located at a different offset than the code used for the current CONFIG_M527x. Tesed on M5271EVB eval platform. Without this patch the FEC driver will report no PHY attached if the bootloader does not pre-initialize the PAR_FECI2C GPIO register. Signed-off-by: Richard Retanubun Signed-off-by: Greg Ungerer --- arch/m68knommu/platform/527x/config.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/m68knommu/platform/527x/config.c b/arch/m68knommu/platform/527x/config.c index 49343fb157b0..428b15922ef5 100644 --- a/arch/m68knommu/platform/527x/config.c +++ b/arch/m68knommu/platform/527x/config.c @@ -189,10 +189,15 @@ static void __init m527x_fec_init(void) m527x_fec_irq_init(0); /* Set multi-function pins to ethernet mode for fec0 */ +#if defined(CONFIG_M5271) + v = readb(MCF_IPSBAR + 0x100047); + writeb(v | 0xf0, MCF_IPSBAR + 0x100047); +#else par = readw(MCF_IPSBAR + 0x100082); writew(par | 0xf00, MCF_IPSBAR + 0x100082); v = readb(MCF_IPSBAR + 0x100078); writeb(v | 0xc0, MCF_IPSBAR + 0x100078); +#endif #ifdef CONFIG_FEC2 m527x_fec_irq_init(1); -- cgit v1.2.2 From a14f5e4feb3efd907df7f1b176c2367910a8e796 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Fri, 17 Apr 2009 22:55:06 +1000 Subject: m68knommu: fix missing .data.cacheline_aligned section Add a .data.cacheline_aligned section to the data segment. Signed-off-by: Greg Ungerer --- arch/m68knommu/kernel/vmlinux.lds.S | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S index 69ba9b10767a..b7fe505e358d 100644 --- a/arch/m68knommu/kernel/vmlinux.lds.S +++ b/arch/m68knommu/kernel/vmlinux.lds.S @@ -147,6 +147,8 @@ SECTIONS { . = ALIGN(4); _sdata = . ; DATA_DATA + . = ALIGN(32); + *(.data.cacheline_aligned) . = ALIGN(8192) ; *(.data.init_task) _edata = . ; -- cgit v1.2.2 From 830c072b1ea0078396c42db120452fc36516ed1d Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Fri, 17 Apr 2009 22:56:50 +1000 Subject: m68knommu: remove unused kernel stats offsets The irq field of the kernel stats struct is not used by the assembly support code, so remove it from the offsets. Signed-off-by: Greg Ungerer --- arch/m68knommu/kernel/asm-offsets.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch') diff --git a/arch/m68knommu/kernel/asm-offsets.c b/arch/m68knommu/kernel/asm-offsets.c index c785d07c02cc..f500dd6935d6 100644 --- a/arch/m68knommu/kernel/asm-offsets.c +++ b/arch/m68knommu/kernel/asm-offsets.c @@ -30,9 +30,6 @@ int main(void) DEFINE(TASK_MM, offsetof(struct task_struct, mm)); DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm)); - /* offsets into the kernel_stat struct */ - DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs)); - /* offsets into the irq_cpustat_t struct */ DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending)); @@ -69,9 +66,6 @@ int main(void) DEFINE(PT_VECTOR, offsetof(struct pt_regs, pc) + 4); #endif - /* offsets into the kernel_stat struct */ - DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs)); - /* signal defines */ DEFINE(SIGSEGV, SIGSEGV); DEFINE(SEGV_MAPERR, SEGV_MAPERR); -- cgit v1.2.2 From ec40f95db753d3bfdbcc43b1505ecf7980cb6492 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Fri, 17 Apr 2009 23:11:38 +1000 Subject: m68knommu: fix DMA support for ColdFire ColdFire CPU family members support DMA (all those with the FEC ethernet core use it, the rest have dedicated DMA engines). The code support is just missing a handful of routines for it to be usable by drivers. Add the missing dma_ functions. Signed-off-by: Greg Ungerer --- arch/m68knommu/Kconfig | 1 + arch/m68knommu/kernel/dma.c | 37 ++++++++++++++++++++++++++++++++++--- 2 files changed, 35 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index 4beb59dfc6ec..534376299a99 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -16,6 +16,7 @@ config MMU config NO_DMA bool + depends on !COLDFIRE default y config FPU diff --git a/arch/m68knommu/kernel/dma.c b/arch/m68knommu/kernel/dma.c index 936125806638..aaf38bbbb6cd 100644 --- a/arch/m68knommu/kernel/dma.c +++ b/arch/m68knommu/kernel/dma.c @@ -7,10 +7,9 @@ #include #include -#include #include #include -#include +#include void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp) @@ -36,7 +35,39 @@ void dma_free_coherent(struct device *dev, size_t size, free_pages((unsigned long)vaddr, get_order(size)); } -void dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size, enum dma_data_direction dir) +void dma_sync_single_for_device(struct device *dev, dma_addr_t handle, + size_t size, enum dma_data_direction dir) { + switch (dir) { + case DMA_TO_DEVICE: + flush_dcache_range(handle, size); + break; + case DMA_FROM_DEVICE: + /* Should be clear already */ + break; + default: + if (printk_ratelimit()) + printk("dma_sync_single_for_device: unsupported dir %u\n", dir); + break; + } +} + +EXPORT_SYMBOL(dma_sync_single_for_device); +dma_addr_t dma_map_single(struct device *dev, void *addr, size_t size, + enum dma_data_direction dir) +{ + dma_addr_t handle = virt_to_phys(addr); + flush_dcache_range(handle, size); + return handle; } +EXPORT_SYMBOL(dma_map_single); +dma_addr_t dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction dir) +{ + dma_addr_t handle = page_to_phys(page) + offset; + dma_sync_single_for_device(dev, handle, size, dir); + return handle; +} +EXPORT_SYMBOL(dma_map_page); -- cgit v1.2.2 From 24f1ce803c55f645429e6a7dd94763fbace84b0a Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 16 Apr 2009 04:47:32 +0000 Subject: powerpc: Fix crash on CPU hotplug early_init_mmu_secondary() is called at CPU hotplug time, so it must be marked as __cpuinit, not __init. Caused by 757c74d2 ("powerpc/mm: Introduce early_init_mmu() on 64-bit"). Tested-by: Sachin Sant Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/mm/hash_utils_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index db556d25c3a7..1ade7eb6ae00 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -753,7 +753,7 @@ void __init early_init_mmu(void) } #ifdef CONFIG_SMP -void __init early_init_mmu_secondary(void) +void __cpuinit early_init_mmu_secondary(void) { /* Initialize hash table for that CPU */ if (!firmware_has_feature(FW_FEATURE_LPAR)) -- cgit v1.2.2 From 59e4c3a2fe9cb1681bb2cff508ff79466f7585ba Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Thu, 16 Apr 2009 06:22:01 +0000 Subject: powerpc/32: Don't clobber personality flags on exec Now that ppc32 implements address randomization it also wants to inherit personality flags like ADDR_NO_RANDOMIZE across exec, for things like `setarch ppc -R' to work. But the ppc32 version of SET_PERSONALITY forcefully sets PER_LINUX, clearing all personality flags. So be careful about preserving the flags. Signed-off-by: Andreas Schwab Signed-off-by: Paul Mackerras --- arch/powerpc/include/asm/elf.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h index 1a856b15226e..087c22f1d368 100644 --- a/arch/powerpc/include/asm/elf.h +++ b/arch/powerpc/include/asm/elf.h @@ -258,7 +258,8 @@ do { \ # define elf_read_implies_exec(ex, exec_stk) (test_thread_flag(TIF_32BIT) ? \ (exec_stk != EXSTACK_DISABLE_X) : 0) #else -# define SET_PERSONALITY(ex) set_personality(PER_LINUX) +# define SET_PERSONALITY(ex) \ + set_personality(PER_LINUX | (current->personality & (~PER_MASK))) #endif /* __powerpc64__ */ extern int dcache_bsize; -- cgit v1.2.2 From 0d3b2ab6be1500041e11059bee97e83da9da28cc Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 16 Apr 2009 09:05:38 +0000 Subject: powerpc/ps3: Fix CONFIG_PS3_FLASH=n build warning Fix build warnings like these when CONFIG_PS3_FLASH=n: arch/powerpc/platforms/ps3/os-area.c: warning: 'update_flash_db' defined but not used Signed-off-by: Geoff Levand Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/ps3/os-area.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c index 86e392b1b049..cf1cd0f8c18f 100644 --- a/arch/powerpc/platforms/ps3/os-area.c +++ b/arch/powerpc/platforms/ps3/os-area.c @@ -578,7 +578,7 @@ static void os_area_db_init(struct os_area_db *db) * */ -static void update_flash_db(void) +static void __maybe_unused update_flash_db(void) { int result; int file; -- cgit v1.2.2 From 2d6b3de2374dd8c9f5ab23d57c7bbcda08553356 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Fri, 17 Apr 2009 06:36:37 +0000 Subject: powerpc/pasemi: Fix build error on UP MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A non-SMP version of smp_send_stop() is now included in smp.h. Remove the unneeded definition in the pasemi setup.c. Fixes build errors like these when CONFIG_SMP=n: arch/powerpc/platforms/pasemi/setup.c:48: error: redefinition of ‘smp_send_stop’ include/linux/smp.h:125: error: previous definition of 'smp_send_stop' was here Reported-by: subrata@linux.vnet.ibm.com Signed-off-by: Geoff Levand Acked-by: Olof Johansson Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pasemi/setup.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c index c64fb5bfb37e..153051eb6d93 100644 --- a/arch/powerpc/platforms/pasemi/setup.c +++ b/arch/powerpc/platforms/pasemi/setup.c @@ -44,10 +44,6 @@ #include "pasemi.h" -#if !defined(CONFIG_SMP) -static void smp_send_stop(void) {} -#endif - /* SDC reset register, must be pre-mapped at reset time */ static void __iomem *reset_reg; -- cgit v1.2.2 From c5505081cd734a409eb11e1f844b6bf5427a7925 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 22 Apr 2009 17:10:46 +1000 Subject: m68knommu: update the defconfig for the ColdFire 5208evb board Signed-off-by: Greg Ungerer --- arch/m68knommu/configs/m5208evb_defconfig | 163 +++++++++++++++++------------- 1 file changed, 93 insertions(+), 70 deletions(-) (limited to 'arch') diff --git a/arch/m68knommu/configs/m5208evb_defconfig b/arch/m68knommu/configs/m5208evb_defconfig index 6fae33a05e2a..854a4f333b2f 100644 --- a/arch/m68knommu/configs/m5208evb_defconfig +++ b/arch/m68knommu/configs/m5208evb_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc1 +# Linux kernel version: 2.6.30-rc2 # CONFIG_M68K=y # CONFIG_MMU is not set @@ -15,9 +15,10 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_TIME_LOW_RES=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_NO_IOPORT=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -33,53 +34,55 @@ CONFIG_LOCALVERSION_AUTO=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y -# CONFIG_UID16 is not set -# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set +# CONFIG_AIO is not set # CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLAB=y -# CONFIG_SLUB is not set +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +# CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -93,7 +96,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Processor type and features @@ -145,44 +148,39 @@ CONFIG_RAM16BIT=y # CONFIG_ROM is not set CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +# CONFIG_UNEVICTABLE_LRU is not set CONFIG_ISA_DMA_API=y -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_PCI is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set - # # Executable file formats # CONFIG_BINFMT_FLAT=y # CONFIG_BINFMT_ZFLAT is not set # CONFIG_BINFMT_SHARED_FLAT is not set -# CONFIG_BINFMT_AOUT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set - -# -# Networking -# CONFIG_NET=y # @@ -223,6 +221,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -232,7 +231,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -243,14 +244,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -289,10 +284,8 @@ CONFIG_MTD_BLOCK=y # # RAM/ROM/Flash chip drivers # -CONFIG_MTD_CFI=y +# CONFIG_MTD_CFI is not set # CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y @@ -303,10 +296,6 @@ CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set @@ -315,7 +304,6 @@ CONFIG_MTD_RAM=y # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_UCLINUX=y # CONFIG_MTD_PLATRAM is not set @@ -336,6 +324,11 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # @@ -351,6 +344,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -364,7 +358,7 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_NETLINK is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -374,10 +368,15 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_FEC=y # CONFIG_FEC2 is not set @@ -389,8 +388,10 @@ CONFIG_FEC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -415,7 +416,7 @@ CONFIG_FEC=y # Character devices # # CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -428,7 +429,6 @@ CONFIG_FEC=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_COLDFIRE is not set CONFIG_SERIAL_MCF=y CONFIG_SERIAL_MCF_BAUDRATE=115200 CONFIG_SERIAL_MCF_CONSOLE=y @@ -447,19 +447,23 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -470,11 +474,12 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers # -# CONFIG_DAB is not set +CONFIG_DAB=y # # Graphics support @@ -488,10 +493,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set @@ -499,7 +500,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -507,11 +511,13 @@ CONFIG_SSB_POSSIBLE=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +# CONFIG_FILE_LOCKING is not set # CONFIG_XFS_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set @@ -519,6 +525,11 @@ CONFIG_EXT2_FS=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -540,10 +551,7 @@ CONFIG_PROC_SYSCTL=y # CONFIG_SYSFS is not set # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -553,13 +561,20 @@ CONFIG_PROC_SYSCTL=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +# CONFIG_ROMFS_BACKED_BY_BLOCK is not set +CONFIG_ROMFS_BACKED_BY_MTD=y +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_MTD=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # @@ -581,10 +596,14 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set CONFIG_FULLDEBUG=y # CONFIG_HIGHPROFILE is not set -# CONFIG_BOOTPARAM is not set +CONFIG_BOOTPARAM=y +CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0" # CONFIG_NO_KERNEL_MSG is not set # CONFIG_BDM_DISABLE is not set @@ -592,19 +611,23 @@ CONFIG_FULLDEBUG=y # Security options # # CONFIG_KEYS is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.2 From f170ea24c218905f78791b15a6dcb3c99b730a60 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 22 Apr 2009 17:26:49 +1000 Subject: m68knommu: add a defconfig for the ColdFire M5272C3 board Signed-off-by: Greg Ungerer --- arch/m68knommu/configs/m5272c3_defconfig | 645 +++++++++++++++++++++++++++++++ 1 file changed, 645 insertions(+) create mode 100644 arch/m68knommu/configs/m5272c3_defconfig (limited to 'arch') diff --git a/arch/m68knommu/configs/m5272c3_defconfig b/arch/m68knommu/configs/m5272c3_defconfig new file mode 100644 index 000000000000..f37852a34218 --- /dev/null +++ b/arch/m68knommu/configs/m5272c3_defconfig @@ -0,0 +1,645 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc2 +# Wed Apr 22 17:17:30 2009 +# +CONFIG_M68K=y +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_ZONE_DMA=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_TIME_LOW_RES=y +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_NO_IOPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set +# CONFIG_AIO is not set +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_FREEZER is not set + +# +# Processor type and features +# +# CONFIG_M68328 is not set +# CONFIG_M68EZ328 is not set +# CONFIG_M68VZ328 is not set +# CONFIG_M68360 is not set +# CONFIG_M5206 is not set +# CONFIG_M5206e is not set +# CONFIG_M520x is not set +# CONFIG_M523x is not set +# CONFIG_M5249 is not set +# CONFIG_M5271 is not set +CONFIG_M5272=y +# CONFIG_M5275 is not set +# CONFIG_M528x is not set +# CONFIG_M5307 is not set +# CONFIG_M532x is not set +# CONFIG_M5407 is not set +CONFIG_COLDFIRE=y +CONFIG_CLOCK_SET=y +CONFIG_CLOCK_FREQ=66666666 +CONFIG_CLOCK_DIV=1 + +# +# Platform +# +# CONFIG_UC5272 is not set +CONFIG_M5272C3=y +# CONFIG_COBRA5272 is not set +# CONFIG_CANCam is not set +# CONFIG_SCALES is not set +# CONFIG_NETtel is not set +# CONFIG_CPU16B is not set +# CONFIG_MOD5272 is not set +CONFIG_FREESCALE=y +CONFIG_4KSTACKS=y +CONFIG_HZ=100 + +# +# RAM configuration +# +CONFIG_RAMBASE=0x00000000 +CONFIG_RAMSIZE=0x00800000 +CONFIG_VECTORBASE=0x00000000 +CONFIG_KERNELBASE=0x00020000 +CONFIG_RAMAUTOBIT=y +# CONFIG_RAM8BIT is not set +# CONFIG_RAM16BIT is not set +# CONFIG_RAM32BIT is not set + +# +# ROM configuration +# +# CONFIG_ROM is not set +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_VIRT_TO_BUS=y +# CONFIG_UNEVICTABLE_LRU is not set + +# +# Executable file formats +# +CONFIG_BINFMT_FLAT=y +# CONFIG_BINFMT_ZFLAT is not set +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +CONFIG_FEC=y +# CONFIG_FEC2 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_MCF=y +CONFIG_SERIAL_MCF_BAUDRATE=19200 +CONFIG_SERIAL_MCF_CONSOLE=y +# CONFIG_UNIX98_PTYS is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_FILE_LOCKING is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y +# CONFIG_ROMFS_BACKED_BY_BLOCK is not set +CONFIG_ROMFS_BACKED_BY_MTD=y +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_MTD=y +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_SAMPLES is not set +# CONFIG_FULLDEBUG is not set +# CONFIG_HIGHPROFILE is not set +CONFIG_BOOTPARAM=y +CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0" +# CONFIG_NO_KERNEL_MSG is not set +# CONFIG_BDM_DISABLE is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_HAS_IOMEM=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.2 From 956d039a2537cf79ca608450d36cc70e0e515482 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 17 Apr 2009 04:14:15 -0700 Subject: sparc: Fix bus type probing for ESP and LE devices. If there is a dummy "espdma" or "ledma" parent device above ESP scsi or LE ethernet device nodes, we have to match the bus as SBUS. Otherwise the address and size cell counts are wrong and we don't calculate the final physical device resource values correctly at all. Commit 5280267c1dddb8d413595b87dc406624bb497946 ("sparc: Fix handling of LANCE and ESP parent nodes in of_device.c") was meant to fix this problem, but that only influences the inner loop of build_device_resources(). We need this logic to also kick in at the beginning of build_device_resources() as well, when we make the first attempt to determine the device's immediate parent bus type for 'reg' property element extraction. Based almost entirely upon a patch by Friedrich Oslage. Tested-by: Meelis Roos Signed-off-by: David S. Miller --- arch/sparc/kernel/of_device_32.c | 21 +++++++++++++++++++-- arch/sparc/kernel/of_device_64.c | 21 +++++++++++++++++++-- 2 files changed, 38 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/of_device_32.c b/arch/sparc/kernel/of_device_32.c index 0a83bd737654..c8f14c1dc521 100644 --- a/arch/sparc/kernel/of_device_32.c +++ b/arch/sparc/kernel/of_device_32.c @@ -246,8 +246,25 @@ static unsigned long of_bus_pci_get_flags(const u32 *addr, unsigned long flags) static int of_bus_sbus_match(struct device_node *np) { - return !strcmp(np->name, "sbus") || - !strcmp(np->name, "sbi"); + struct device_node *dp = np; + + while (dp) { + if (!strcmp(dp->name, "sbus") || + !strcmp(dp->name, "sbi")) + return 1; + + /* Have a look at use_1to1_mapping(). We're trying + * to match SBUS if that's the top-level bus and we + * don't have some intervening real bus that provides + * ranges based translations. + */ + if (of_find_property(dp, "ranges", NULL) != NULL) + break; + + dp = dp->parent; + } + + return 0; } static void of_bus_sbus_count_cells(struct device_node *child, diff --git a/arch/sparc/kernel/of_device_64.c b/arch/sparc/kernel/of_device_64.c index 27381f1baffc..5ac287ac03de 100644 --- a/arch/sparc/kernel/of_device_64.c +++ b/arch/sparc/kernel/of_device_64.c @@ -300,8 +300,25 @@ static unsigned long of_bus_pci_get_flags(const u32 *addr, unsigned long flags) static int of_bus_sbus_match(struct device_node *np) { - return !strcmp(np->name, "sbus") || - !strcmp(np->name, "sbi"); + struct device_node *dp = np; + + while (dp) { + if (!strcmp(dp->name, "sbus") || + !strcmp(dp->name, "sbi")) + return 1; + + /* Have a look at use_1to1_mapping(). We're trying + * to match SBUS if that's the top-level bus and we + * don't have some intervening real bus that provides + * ranges based translations. + */ + if (of_find_property(dp, "ranges", NULL) != NULL) + break; + + dp = dp->parent; + } + + return 0; } static void of_bus_sbus_count_cells(struct device_node *child, -- cgit v1.2.2 From d24d2c1cc4156102f9df9cd0425d58cabf955519 Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Thu, 9 Apr 2009 16:38:14 +0200 Subject: KVM: ia64: fix locking order entering guest Reorder locking as down_read() may return with local interrupts enabled, which means we could go into vti_vcpu_run() with interrupts enabled. This caused random crashes on the Altix as the timer interrupt tried to read a memory mapped clock source, for which the TLB had not yet been reinstated in the exit, before ipsr was retored. Signed-off-by: Jes Sorensen Acked-by: Xiantao Zhang Signed-off-by: Avi Kivity --- arch/ia64/kvm/kvm-ia64.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c index 28af6a731bb8..d20a5db4c4dd 100644 --- a/arch/ia64/kvm/kvm-ia64.c +++ b/arch/ia64/kvm/kvm-ia64.c @@ -610,20 +610,22 @@ static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) int r; again: - preempt_disable(); - local_irq_disable(); - if (signal_pending(current)) { - local_irq_enable(); - preempt_enable(); r = -EINTR; kvm_run->exit_reason = KVM_EXIT_INTR; goto out; } + /* + * down_read() may sleep and return with interrupts enabled + */ + down_read(&vcpu->kvm->slots_lock); + + preempt_disable(); + local_irq_disable(); + vcpu->guest_mode = 1; kvm_guest_enter(); - down_read(&vcpu->kvm->slots_lock); r = vti_vcpu_run(vcpu, kvm_run); if (r < 0) { local_irq_enable(); -- cgit v1.2.2 From bf47a760f66add7870fba33ab50f58b550d6bbd1 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Sun, 5 Apr 2009 14:54:46 -0300 Subject: KVM: MMU: disable global page optimization Complexity to fix it not worthwhile the gains, as discussed in http://article.gmane.org/gmane.comp.emulators.kvm.devel/28649. Cc: stable@kernel.org Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity --- arch/x86/kvm/mmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 2a36f7f7c4c7..b6caf1329b1b 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -1248,7 +1248,7 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu, pgprintk("%s: adding gfn %lx role %x\n", __func__, gfn, role.word); sp->gfn = gfn; sp->role = role; - sp->global = role.cr4_pge; + sp->global = 0; hlist_add_head(&sp->hash_link, bucket); if (!direct) { if (rmap_write_protect(vcpu->kvm, gfn)) -- cgit v1.2.2 From 7f1ea208968f021943d4103ba59e06bb6d8239cb Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Wed, 25 Feb 2009 16:08:31 +0100 Subject: KVM: x86: release time_page on vcpu destruction Not releasing the time_page causes a leak of that page or the compound page it is situated in. Cc: stable@kernel.org Signed-off-by: Joerg Roedel Signed-off-by: Avi Kivity --- arch/x86/kvm/x86.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 8ca100a9ecac..a1ecec5c03e9 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -4159,6 +4159,11 @@ EXPORT_SYMBOL_GPL(kvm_put_guest_fpu); void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu) { + if (vcpu->arch.time_page) { + kvm_release_page_dirty(vcpu->arch.time_page); + vcpu->arch.time_page = NULL; + } + kvm_x86_ops->vcpu_free(vcpu); } -- cgit v1.2.2 From 888d256e9c565cb61505bd218eb37c81fe77a325 Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Fri, 17 Apr 2009 19:24:58 +0200 Subject: KVM: Unregister cpufreq notifier on unload Properly unregister cpufreq notifier on onload if it was registered during init. Signed-off-by: Jan Kiszka Signed-off-by: Avi Kivity --- arch/x86/kvm/x86.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index a1ecec5c03e9..7c1ce5ac6131 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -2775,6 +2775,9 @@ out: void kvm_arch_exit(void) { + if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) + cpufreq_unregister_notifier(&kvmclock_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); kvm_x86_ops = NULL; kvm_mmu_module_exit(); } -- cgit v1.2.2 From 92ea599c9757bc31c279b34737fd79a4f074f91c Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 22 Apr 2009 23:16:21 +1000 Subject: m68knommu: update the default config for the ColdFire 5249EVB. Signed-off-by: Greg Ungerer --- arch/m68knommu/configs/m5249evb_defconfig | 268 +++++++++++++++++++++++------- 1 file changed, 209 insertions(+), 59 deletions(-) (limited to 'arch') diff --git a/arch/m68knommu/configs/m5249evb_defconfig b/arch/m68knommu/configs/m5249evb_defconfig index cc6458333d67..2efba32e33a0 100644 --- a/arch/m68knommu/configs/m5249evb_defconfig +++ b/arch/m68knommu/configs/m5249evb_defconfig @@ -1,6 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc1 +# Linux kernel version: 2.6.30-rc2 +# Wed Apr 22 17:32:41 2009 # CONFIG_M68K=y # CONFIG_MMU is not set @@ -15,9 +16,10 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_TIME_LOW_RES=y +# CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_NO_IOPORT=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -29,11 +31,23 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y # CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set @@ -41,44 +55,37 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y -# CONFIG_UID16 is not set -# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set +# CONFIG_AIO is not set # CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLAB=y -# CONFIG_SLUB is not set +# CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +# CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -92,7 +99,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Processor type and features @@ -144,45 +151,103 @@ CONFIG_RAMAUTOBIT=y # CONFIG_ROM is not set CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +# CONFIG_UNEVICTABLE_LRU is not set CONFIG_ISA_DMA_API=y -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_PCI is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set - # # Executable file formats # CONFIG_BINFMT_FLAT=y # CONFIG_BINFMT_ZFLAT is not set # CONFIG_BINFMT_SHARED_FLAT is not set -# CONFIG_BINFMT_AOUT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set - -# -# Networking -# -# CONFIG_NET is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -194,6 +259,7 @@ CONFIG_BINFMT_FLAT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -258,6 +324,11 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # @@ -266,14 +337,15 @@ CONFIG_MTD_UCLINUX=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set -CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -285,6 +357,56 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +# CONFIG_PPP_ASYNC is not set +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set # CONFIG_PHONE is not set # @@ -302,7 +424,7 @@ CONFIG_HAVE_IDE=y # Character devices # # CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -315,7 +437,6 @@ CONFIG_HAVE_IDE=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_COLDFIRE is not set CONFIG_SERIAL_MCF=y CONFIG_SERIAL_MCF_BAUDRATE=19200 CONFIG_SERIAL_MCF_CONSOLE=y @@ -323,7 +444,8 @@ CONFIG_SERIAL_MCF_CONSOLE=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -334,19 +456,23 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -356,11 +482,13 @@ CONFIG_SSB_POSSIBLE=y # Multimedia core support # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers # -# CONFIG_DAB is not set +CONFIG_DAB=y # # Graphics support @@ -374,10 +502,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set @@ -385,7 +509,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -393,18 +520,27 @@ CONFIG_SSB_POSSIBLE=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +# CONFIG_FILE_LOCKING is not set # CONFIG_XFS_FS is not set -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -427,10 +563,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -440,13 +573,21 @@ CONFIG_SYSFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +# CONFIG_ROMFS_BACKED_BY_BLOCK is not set +CONFIG_ROMFS_BACKED_BY_MTD=y +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_MTD=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set # # Partition Types @@ -454,6 +595,7 @@ CONFIG_ROMFS_FS=y # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set +# CONFIG_DLM is not set # # Kernel hacking @@ -468,10 +610,14 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_SAMPLES is not set # CONFIG_FULLDEBUG is not set # CONFIG_HIGHPROFILE is not set -# CONFIG_BOOTPARAM is not set +CONFIG_BOOTPARAM=y +CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0" # CONFIG_NO_KERNEL_MSG is not set # CONFIG_BDM_DISABLE is not set @@ -480,18 +626,22 @@ CONFIG_FRAME_WARN=1024 # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.2 From 2d4f9efa2a529f352dafd41a616c91531bb13ccd Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 22 Apr 2009 23:30:48 +1000 Subject: m68knommu: update the default config for the ColdFire 5257EVB board Signed-off-by: Greg Ungerer --- arch/m68knommu/configs/m5275evb_defconfig | 167 +++++++++++++++++------------- 1 file changed, 96 insertions(+), 71 deletions(-) (limited to 'arch') diff --git a/arch/m68knommu/configs/m5275evb_defconfig b/arch/m68knommu/configs/m5275evb_defconfig index 0d1256f5addb..dc5c621d419c 100644 --- a/arch/m68knommu/configs/m5275evb_defconfig +++ b/arch/m68knommu/configs/m5275evb_defconfig @@ -1,6 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc1 +# Linux kernel version: 2.6.30-rc2 +# Wed Apr 22 23:29:01 2009 # CONFIG_M68K=y # CONFIG_MMU is not set @@ -15,9 +16,10 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_TIME_LOW_RES=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_NO_IOPORT=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -33,10 +35,19 @@ CONFIG_LOCALVERSION_AUTO=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set @@ -44,44 +55,37 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y -# CONFIG_UID16 is not set -# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set +# CONFIG_AIO is not set # CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLAB=y -# CONFIG_SLUB is not set +# CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +# CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -95,7 +99,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Processor type and features @@ -148,44 +152,39 @@ CONFIG_RAMAUTOBIT=y # CONFIG_ROM is not set CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +# CONFIG_UNEVICTABLE_LRU is not set CONFIG_ISA_DMA_API=y -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_PCI is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set - # # Executable file formats # CONFIG_BINFMT_FLAT=y # CONFIG_BINFMT_ZFLAT is not set # CONFIG_BINFMT_SHARED_FLAT is not set -# CONFIG_BINFMT_AOUT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set - -# -# Networking -# CONFIG_NET=y # @@ -226,6 +225,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -235,7 +235,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -246,14 +248,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -332,6 +328,11 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # @@ -347,6 +348,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -360,7 +362,7 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_NETLINK is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -370,10 +372,15 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_FEC=y CONFIG_FEC2=y @@ -385,8 +392,10 @@ CONFIG_FEC2=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=y # CONFIG_PPP_MULTILINK is not set @@ -421,7 +430,7 @@ CONFIG_SLHC=y # Character devices # # CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -434,7 +443,6 @@ CONFIG_SLHC=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_COLDFIRE is not set CONFIG_SERIAL_MCF=y CONFIG_SERIAL_MCF_BAUDRATE=19200 CONFIG_SERIAL_MCF_CONSOLE=y @@ -442,7 +450,8 @@ CONFIG_SERIAL_MCF_CONSOLE=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -453,19 +462,23 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -476,6 +489,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers @@ -494,10 +508,6 @@ CONFIG_DAB=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set @@ -505,7 +515,10 @@ CONFIG_DAB=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -513,12 +526,14 @@ CONFIG_DAB=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +# CONFIG_FILE_LOCKING is not set # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set @@ -526,6 +541,11 @@ CONFIG_EXT2_FS=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -548,10 +568,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -561,21 +578,21 @@ CONFIG_SYSFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +# CONFIG_ROMFS_BACKED_BY_BLOCK is not set +CONFIG_ROMFS_BACKED_BY_MTD=y +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_MTD=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -# CONFIG_NFS_FS is not set -# CONFIG_NFSD is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set # # Partition Types @@ -598,10 +615,14 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # CONFIG_FULLDEBUG is not set # CONFIG_HIGHPROFILE is not set -# CONFIG_BOOTPARAM is not set +CONFIG_BOOTPARAM=y +CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0" # CONFIG_NO_KERNEL_MSG is not set # CONFIG_BDM_DISABLE is not set @@ -610,18 +631,22 @@ CONFIG_FRAME_WARN=1024 # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.2 From 7a6f9cbb37120c745fc187083fb5c3de4dca4f97 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Tue, 21 Apr 2009 20:00:37 +0200 Subject: x86: hpet: fix periodic mode programming on AMD 81xx (See http://bugzilla.kernel.org/show_bug.cgi?id=12961) It partially reverts commit c23e253e67c9d8a91a0ffa33c1f571a17f0a2403 (x86: hpet: stop HPET_COUNTER when programming periodic mode) HPET on AMD 81xx chipset needs a second write (with HPET_TN_SETVAL cleared) to T0_CMP register to set the period in periodic mode. With this patch HPET_COUNTER is still stopped but not reset when HPET is programmed in periodic mode. This should help to avoid races when HPET is programmed in periodic mode and fixes a boot time hang that I've observed on a machine when using 1000HZ. [ Impact: fix boot time hang on machines with AMD 81xx chipset ] Reported-by: Jeff Mahoney Signed-off-by: Andreas Herrmann Tested-by: Jeff Mahoney LKML-Reference: <20090421180037.GA2763@alberich.amd.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/hpet.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 3f0019e0a229..81408b93f887 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -236,6 +236,10 @@ static void hpet_stop_counter(void) unsigned long cfg = hpet_readl(HPET_CFG); cfg &= ~HPET_CFG_ENABLE; hpet_writel(cfg, HPET_CFG); +} + +static void hpet_reset_counter(void) +{ hpet_writel(0, HPET_COUNTER); hpet_writel(0, HPET_COUNTER + 4); } @@ -250,6 +254,7 @@ static void hpet_start_counter(void) static void hpet_restart_counter(void) { hpet_stop_counter(); + hpet_reset_counter(); hpet_start_counter(); } @@ -309,7 +314,7 @@ static int hpet_setup_msi_irq(unsigned int irq); static void hpet_set_mode(enum clock_event_mode mode, struct clock_event_device *evt, int timer) { - unsigned long cfg; + unsigned long cfg, cmp, now; uint64_t delta; switch (mode) { @@ -317,12 +322,23 @@ static void hpet_set_mode(enum clock_event_mode mode, hpet_stop_counter(); delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * evt->mult; delta >>= evt->shift; + now = hpet_readl(HPET_COUNTER); + cmp = now + (unsigned long) delta; cfg = hpet_readl(HPET_Tn_CFG(timer)); /* Make sure we use edge triggered interrupts */ cfg &= ~HPET_TN_LEVEL; cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL | HPET_TN_32BIT; hpet_writel(cfg, HPET_Tn_CFG(timer)); + hpet_writel(cmp, HPET_Tn_CMP(timer)); + udelay(1); + /* + * HPET on AMD 81xx needs a second write (with HPET_TN_SETVAL + * cleared) to T0_CMP to set the period. The HPET_TN_SETVAL + * bit is automatically cleared after the first write. + * (See AMD-8111 HyperTransport I/O Hub Data Sheet, + * Publication # 24674) + */ hpet_writel((unsigned long) delta, HPET_Tn_CMP(timer)); hpet_start_counter(); hpet_print_config(); -- cgit v1.2.2 From 73fc267615fd547538d4afb602f51de6b5ab0a31 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Thu, 23 Apr 2009 00:11:23 +1000 Subject: m68knommu: update the default config for the ColdFire 5307C3 board Signed-off-by: Greg Ungerer --- arch/m68knommu/configs/m5307c3_defconfig | 231 ++++++++++++++++++++++--------- 1 file changed, 163 insertions(+), 68 deletions(-) (limited to 'arch') diff --git a/arch/m68knommu/configs/m5307c3_defconfig b/arch/m68knommu/configs/m5307c3_defconfig index fe2acdfa4d76..3a3f6733ae43 100644 --- a/arch/m68knommu/configs/m5307c3_defconfig +++ b/arch/m68knommu/configs/m5307c3_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc1 +# Linux kernel version: 2.6.30-rc2 # CONFIG_M68K=y # CONFIG_MMU is not set @@ -15,9 +15,10 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_TIME_LOW_RES=y +# CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_NO_IOPORT=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -33,10 +34,21 @@ CONFIG_LOCALVERSION_AUTO=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_USER_SCHED is not set +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set @@ -44,44 +56,37 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y -# CONFIG_UID16 is not set -# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set +# CONFIG_AIO is not set # CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLAB=y -# CONFIG_SLUB is not set +# CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +# CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -95,7 +100,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Processor type and features @@ -127,12 +132,11 @@ CONFIG_CLOCK_DIV=2 # # CONFIG_ARN5307 is not set CONFIG_M5307C3=y -# CONFIG_eLIA is not set # CONFIG_SECUREEDGEMP3 is not set # CONFIG_CLEOPATRA is not set # CONFIG_NETtel is not set CONFIG_FREESCALE=y -# CONFIG_4KSTACKS is not set +CONFIG_4KSTACKS=y CONFIG_HZ=100 # @@ -153,45 +157,36 @@ CONFIG_RAMAUTOBIT=y # CONFIG_ROM is not set CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +# CONFIG_UNEVICTABLE_LRU is not set CONFIG_ISA_DMA_API=y -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_PCI is not set -# CONFIG_COMEMPCI is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set - # # Executable file formats # CONFIG_BINFMT_FLAT=y # CONFIG_BINFMT_ZFLAT is not set # CONFIG_BINFMT_SHARED_FLAT is not set -# CONFIG_BINFMT_AOUT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set - -# -# Networking -# CONFIG_NET=y # @@ -232,6 +227,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -241,7 +237,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -252,14 +250,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -274,7 +266,79 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set @@ -286,6 +350,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -299,7 +364,7 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_NETLINK is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -309,10 +374,15 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -322,8 +392,10 @@ CONFIG_NET_ETHERNET=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=y # CONFIG_PPP_MULTILINK is not set @@ -381,7 +453,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -394,13 +466,12 @@ CONFIG_INPUT=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_COLDFIRE is not set CONFIG_SERIAL_MCF=y CONFIG_SERIAL_MCF_BAUDRATE=19200 CONFIG_SERIAL_MCF_CONSOLE=y CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_GEN_RTC is not set @@ -413,19 +484,23 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -436,6 +511,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers @@ -454,10 +530,6 @@ CONFIG_DAB=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set @@ -466,7 +538,10 @@ CONFIG_DAB=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -474,12 +549,14 @@ CONFIG_DAB=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set @@ -487,6 +564,11 @@ CONFIG_EXT2_FS=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -509,10 +591,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -520,14 +599,22 @@ CONFIG_SYSFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +# CONFIG_ROMFS_BACKED_BY_BLOCK is not set +CONFIG_ROMFS_BACKED_BY_MTD=y +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_MTD=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # @@ -551,10 +638,14 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set CONFIG_FULLDEBUG=y # CONFIG_HIGHPROFILE is not set -# CONFIG_BOOTPARAM is not set +CONFIG_BOOTPARAM=y +CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0" # CONFIG_NO_KERNEL_MSG is not set # CONFIG_BDM_DISABLE is not set @@ -563,18 +654,22 @@ CONFIG_FULLDEBUG=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.2 From c5428e950ad42640f00092949fd17e356dfdeafa Mon Sep 17 00:00:00 2001 From: Coly Li Date: Wed, 22 Apr 2009 23:21:56 +0800 Subject: uv_time: add parameter to uv_read_rtc() uv_read_rtc() is referenced by read member of struct clocksource clocksource_uv. In include/linux/clocksource.h, read of struct clocksource is declared as: cycle_t (*read)(struct clocksource *cs) This got introduced recently in: 8e19608: clocksource: pass clocksource to read() callback But arch/x86/kernel/uv_time.c was not properly converted by that pach. This patch adds a dummy parameter (struct clocksource type) to uv_read_rtc() to fix the incompatible reference in clocksource_uv, and add a NULL parameter in all places where uv_read_rtc() gets called. [ Impact: cleanup, address compiler warning ] Signed-off-by: Coly Li Cc: Dimitri Sivanich Cc: Magnus Damm Cc: Andrew Morton Cc: Hugh Dickins LKML-Reference: <49EF3614.1050806@suse.de> Signed-off-by: Ingo Molnar Cc: Dimitri Sivanich --- arch/x86/kernel/uv_time.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/uv_time.c b/arch/x86/kernel/uv_time.c index 2ffb6c53326e..583f11d5c480 100644 --- a/arch/x86/kernel/uv_time.c +++ b/arch/x86/kernel/uv_time.c @@ -29,7 +29,7 @@ #define RTC_NAME "sgi_rtc" -static cycle_t uv_read_rtc(void); +static cycle_t uv_read_rtc(struct clocksource *cs); static int uv_rtc_next_event(unsigned long, struct clock_event_device *); static void uv_rtc_timer_setup(enum clock_event_mode, struct clock_event_device *); @@ -123,7 +123,7 @@ static int uv_setup_intr(int cpu, u64 expires) /* Initialize comparator value */ uv_write_global_mmr64(pnode, UVH_INT_CMPB, expires); - return (expires < uv_read_rtc() && !uv_intr_pending(pnode)); + return (expires < uv_read_rtc(NULL) && !uv_intr_pending(pnode)); } /* @@ -256,7 +256,7 @@ static int uv_rtc_unset_timer(int cpu) spin_lock_irqsave(&head->lock, flags); - if (head->next_cpu == bcpu && uv_read_rtc() >= *t) + if (head->next_cpu == bcpu && uv_read_rtc(NULL) >= *t) rc = 1; *t = ULLONG_MAX; @@ -278,7 +278,7 @@ static int uv_rtc_unset_timer(int cpu) /* * Read the RTC. */ -static cycle_t uv_read_rtc(void) +static cycle_t uv_read_rtc(struct clocksource *cs) { return (cycle_t)uv_read_local_mmr(UVH_RTC); } @@ -291,7 +291,7 @@ static int uv_rtc_next_event(unsigned long delta, { int ced_cpu = cpumask_first(ced->cpumask); - return uv_rtc_set_timer(ced_cpu, delta + uv_read_rtc()); + return uv_rtc_set_timer(ced_cpu, delta + uv_read_rtc(NULL)); } /* -- cgit v1.2.2 From cc7c0fa3b90a047751f50371639b90dc119e63ea Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 9 Apr 2009 22:23:51 +0200 Subject: m68k,m68knommu: Wire up preadv and pwritev Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer --- arch/m68k/include/asm/unistd.h | 4 +++- arch/m68k/kernel/entry.S | 2 ++ arch/m68knommu/kernel/syscalltable.S | 2 ++ 3 files changed, 7 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h index 3c19027331fa..aa29a8640f74 100644 --- a/arch/m68k/include/asm/unistd.h +++ b/arch/m68k/include/asm/unistd.h @@ -332,10 +332,12 @@ #define __NR_dup3 326 #define __NR_pipe2 327 #define __NR_inotify_init1 328 +#define __NR_preadv 329 +#define __NR_pwritev 330 #ifdef __KERNEL__ -#define NR_syscalls 329 +#define NR_syscalls 331 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S index 5c332f2b9b83..8744f60c07a9 100644 --- a/arch/m68k/kernel/entry.S +++ b/arch/m68k/kernel/entry.S @@ -753,4 +753,6 @@ sys_call_table: .long sys_dup3 .long sys_pipe2 .long sys_inotify_init1 + .long sys_preadv + .long sys_pwritev /* 330 */ diff --git a/arch/m68knommu/kernel/syscalltable.S b/arch/m68knommu/kernel/syscalltable.S index 1017e76f3711..c0b8782832fd 100644 --- a/arch/m68knommu/kernel/syscalltable.S +++ b/arch/m68knommu/kernel/syscalltable.S @@ -347,6 +347,8 @@ ENTRY(sys_call_table) .long sys_dup3 .long sys_pipe2 .long sys_inotify_init1 + .long sys_preadv + .long sys_pwritev /* 330 */ .rept NR_syscalls-(.-sys_call_table)/4 .long sys_ni_syscall -- cgit v1.2.2 From adfe7c69891128f5e238a5e6823709b4bb85b340 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 29 Mar 2009 14:23:44 +0200 Subject: m68k: Update defconfigs for 2.6.30-rc3 Signed-off-by: Geert Uytterhoeven --- arch/m68k/configs/amiga_defconfig | 163 ++++++++++++++++++++++------------- arch/m68k/configs/apollo_defconfig | 120 +++++++++++++++++--------- arch/m68k/configs/atari_defconfig | 155 +++++++++++++++++++++------------ arch/m68k/configs/bvme6000_defconfig | 119 ++++++++++++++++--------- arch/m68k/configs/hp300_defconfig | 120 +++++++++++++++++--------- arch/m68k/configs/mac_defconfig | 125 ++++++++++++++++++--------- arch/m68k/configs/multi_defconfig | 157 ++++++++++++++++++++------------- arch/m68k/configs/mvme147_defconfig | 119 ++++++++++++++++--------- arch/m68k/configs/mvme16x_defconfig | 119 ++++++++++++++++--------- arch/m68k/configs/q40_defconfig | 122 +++++++++++++++++--------- arch/m68k/configs/sun3_defconfig | 120 +++++++++++++++++--------- arch/m68k/configs/sun3x_defconfig | 120 +++++++++++++++++--------- 12 files changed, 1034 insertions(+), 525 deletions(-) (limited to 'arch') diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index 23597beb66c1..0f69fa5ddf26 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:42 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:47:52 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -140,12 +151,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -157,7 +169,7 @@ CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m CONFIG_ZORRO=y CONFIG_AMIGA_PCMCIA=y -# CONFIG_HEARTBEAT is not set +CONFIG_HEARTBEAT=y CONFIG_PROC_HARDWARE=y CONFIG_ISA=y CONFIG_GENERIC_ISA_DMA=y @@ -184,7 +196,10 @@ CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set CONFIG_NET_IPIP=m CONFIG_NET_IPGRE=m # CONFIG_ARPD is not set @@ -258,6 +273,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -266,6 +282,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -276,6 +293,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -354,25 +372,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -394,8 +407,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -406,8 +421,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -453,15 +468,20 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y @@ -469,7 +489,6 @@ CONFIG_IDE_GD_ATA=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -478,7 +497,6 @@ CONFIG_IDE_PROC_FS=y # # CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_GAYLE=y -CONFIG_BLK_DEV_IDEDOUBLER=y CONFIG_BLK_DEV_BUDDHA=y # CONFIG_BLK_DEV_IDEDMA is not set @@ -530,6 +548,8 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set @@ -547,6 +567,7 @@ CONFIG_GVP11_SCSI=y CONFIG_SCSI_A4000T=y CONFIG_SCSI_ZORRO7XX=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -554,7 +575,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -567,6 +588,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -577,14 +599,16 @@ CONFIG_VETH=m # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set -CONFIG_ARIADNE=m -CONFIG_A2065=m -CONFIG_HYDRA=m -CONFIG_ZORRO8390=m -CONFIG_APNE=m +CONFIG_ARIADNE=y +CONFIG_A2065=y +CONFIG_HYDRA=y +CONFIG_ZORRO8390=y +CONFIG_APNE=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set +# CONFIG_ETHOC is not set # CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_DNET is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set @@ -609,7 +633,10 @@ CONFIG_APNE=m # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PLIP is not set CONFIG_PPP=m @@ -719,7 +746,7 @@ CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set -CONFIG_A2232=m +CONFIG_A2232=y # # Serial drivers @@ -730,6 +757,7 @@ CONFIG_A2232=m # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=m @@ -821,6 +849,7 @@ CONFIG_FB_FM2=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -856,7 +885,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -867,14 +895,13 @@ CONFIG_HID_COMPAT=y # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices # CONFIG_AMIGA_BUILTIN_SERIAL=y CONFIG_MULTIFACE_III_TTY=m -# CONFIG_SERIAL_CONSOLE is not set +CONFIG_SERIAL_CONSOLE=y # # File systems @@ -883,6 +910,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -909,13 +937,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -923,6 +953,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -935,8 +970,8 @@ CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" @@ -954,10 +989,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -966,6 +998,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -976,23 +1011,24 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=m +CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_ROOT_NFS is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_LOCKD=m +CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_REGISTER_V4 is not set -CONFIG_RPCSEC_GSS_KRB5=m +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y @@ -1067,11 +1103,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -1092,13 +1123,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1113,7 +1152,7 @@ CONFIG_CRYPTO_SEQIV=m # # Block modes # -CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CTR=m CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_ECB=m @@ -1132,7 +1171,7 @@ CONFIG_CRYPTO_XCBC=m # CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m @@ -1154,7 +1193,7 @@ CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SALSA20=m @@ -1168,6 +1207,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1175,11 +1215,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1191,10 +1233,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index 935108d115a0..5fff58196b3e 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:43 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:47:54 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -140,12 +151,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -256,6 +268,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -264,6 +277,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -274,6 +288,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -352,25 +367,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -392,8 +402,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -404,8 +416,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -441,9 +453,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -491,8 +507,11 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -500,7 +519,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -513,6 +532,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -522,6 +542,8 @@ CONFIG_VETH=m # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -538,7 +560,10 @@ CONFIG_NET_ETHERNET=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -596,7 +621,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -636,6 +660,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -718,6 +743,7 @@ CONFIG_FB_APOLLO=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -749,7 +775,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -757,9 +782,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -774,6 +799,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -800,13 +826,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -814,6 +842,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -845,10 +878,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -857,6 +887,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -867,6 +900,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -883,7 +917,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -958,11 +991,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -983,13 +1011,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1059,6 +1095,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1066,11 +1103,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1082,10 +1121,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index a594a1d47b62..d92a90e03ecb 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:44 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:47:56 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -140,12 +151,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -180,7 +192,10 @@ CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set CONFIG_NET_IPIP=m CONFIG_NET_IPGRE=m # CONFIG_ARPD is not set @@ -254,6 +269,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -262,6 +278,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -272,6 +289,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -350,25 +368,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -390,8 +403,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -402,8 +417,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -445,15 +460,20 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y @@ -461,7 +481,6 @@ CONFIG_IDE_GD_ATA=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -516,11 +535,14 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set CONFIG_ATARI_SCSI=y # CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set # CONFIG_ATARI_SCSI_RESET_BOOT is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -528,7 +550,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -541,6 +563,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -550,7 +573,9 @@ CONFIG_VETH=m # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -CONFIG_ATARILANCE=m +CONFIG_ATARILANCE=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -568,7 +593,10 @@ CONFIG_ATARILANCE=m # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PLIP is not set CONFIG_PPP=m @@ -625,11 +653,10 @@ CONFIG_INPUT_KEYBOARD=y CONFIG_ATARI_KBD_CORE=y CONFIG_KEYBOARD_ATARI=y CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -649,7 +676,7 @@ CONFIG_INPUT_M68K_BEEP=m CONFIG_SERIO=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_PARKBD is not set -CONFIG_SERIO_LIBPS2=y +CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set @@ -673,6 +700,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=m @@ -760,6 +788,7 @@ CONFIG_FB_ATARI=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -794,7 +823,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -805,14 +833,14 @@ CONFIG_HID_COMPAT=y # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices # -CONFIG_ATARI_MFPSER=m -CONFIG_ATARI_MIDI=m +CONFIG_ATARI_MFPSER=y +CONFIG_ATARI_MIDI=y CONFIG_ATARI_DSP56K=m +CONFIG_SERIAL_CONSOLE=y # # File systems @@ -821,6 +849,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -847,13 +876,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -861,6 +892,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -892,10 +928,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -904,6 +937,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -914,22 +950,24 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=m +CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set +CONFIG_NFS_V4=y +# CONFIG_ROOT_NFS is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_LOCKD=m +CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -# CONFIG_SUNRPC_REGISTER_V4 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y @@ -1004,11 +1042,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -1029,13 +1062,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1050,7 +1091,7 @@ CONFIG_CRYPTO_SEQIV=m # # Block modes # -CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CTR=m CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_ECB=m @@ -1069,7 +1110,7 @@ CONFIG_CRYPTO_XCBC=m # CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m @@ -1091,7 +1132,7 @@ CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SALSA20=m @@ -1105,6 +1146,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1112,11 +1154,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=y CONFIG_CRC_T10DIF=y @@ -1128,10 +1172,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig index d3d9814a91de..6e6b1aa66682 100644 --- a/arch/m68k/configs/bvme6000_defconfig +++ b/arch/m68k/configs/bvme6000_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:45 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:47:59 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -143,12 +154,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -258,6 +270,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -266,6 +279,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -276,6 +290,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -354,25 +369,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -394,8 +404,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -406,8 +418,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -443,9 +455,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -493,10 +509,13 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set CONFIG_53C700_BE_BUS=y # CONFIG_SCSI_DEBUG is not set CONFIG_BVME6000_SCSI=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -504,7 +523,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -517,6 +536,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -527,6 +547,8 @@ CONFIG_VETH=m CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_BVME6000_NET=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -543,7 +565,10 @@ CONFIG_BVME6000_NET=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -601,7 +626,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -641,6 +665,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -717,7 +742,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -725,9 +749,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -742,6 +766,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -768,13 +793,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -782,6 +809,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -813,10 +845,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -825,6 +854,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -835,6 +867,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -851,7 +884,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -927,11 +959,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -952,13 +979,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1028,6 +1063,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1035,11 +1071,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=m +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1051,10 +1089,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig index 5556ef088d04..bc0565f63a15 100644 --- a/arch/m68k/configs/hp300_defconfig +++ b/arch/m68k/configs/hp300_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:46 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:01 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -141,12 +152,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -257,6 +269,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -265,6 +278,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -275,6 +289,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -353,25 +368,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -393,8 +403,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -405,8 +417,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -442,9 +454,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -492,8 +508,11 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -501,7 +520,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -514,6 +533,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -524,6 +544,8 @@ CONFIG_VETH=m CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_HPLANCE=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -540,7 +562,10 @@ CONFIG_HPLANCE=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -600,7 +625,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -646,6 +670,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -728,6 +753,7 @@ CONFIG_FB_HP300=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -759,7 +785,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -767,9 +792,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -782,6 +807,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -808,13 +834,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -822,6 +850,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -853,10 +886,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -865,6 +895,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -875,6 +908,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -891,7 +925,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -966,11 +999,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -991,13 +1019,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1067,6 +1103,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1074,11 +1111,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1090,10 +1129,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig index c6de25724a25..9991b64fea57 100644 --- a/arch/m68k/configs/mac_defconfig +++ b/arch/m68k/configs/mac_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:47 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:03 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -142,12 +153,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -255,6 +267,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -263,6 +276,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -273,6 +287,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -351,25 +366,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -394,8 +404,10 @@ CONFIG_IPDDP_DECAP=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -406,8 +418,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -429,6 +441,7 @@ CONFIG_CONNECTOR=m # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y +CONFIG_BLK_DEV_SWIM=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m @@ -443,15 +456,20 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y @@ -459,7 +477,6 @@ CONFIG_IDE_GD_ATA=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -514,10 +531,13 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set CONFIG_MAC_SCSI=y CONFIG_SCSI_MAC_ESP=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -525,7 +545,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -547,6 +567,7 @@ CONFIG_ADB_CUDA=y CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -561,6 +582,8 @@ CONFIG_MAC89x0=m CONFIG_MACSONIC=m CONFIG_MACMACE=y # CONFIG_NET_VENDOR_SMC is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -577,7 +600,10 @@ CONFIG_MACMACE=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -635,7 +661,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -677,6 +702,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -760,6 +786,7 @@ CONFIG_FB_MAC=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -793,7 +820,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -801,9 +827,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -819,6 +845,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -845,13 +872,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -859,6 +888,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -890,10 +924,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=y @@ -902,6 +933,9 @@ CONFIG_HFSPLUS_FS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -912,6 +946,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y @@ -927,7 +962,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1003,11 +1037,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -1028,13 +1057,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1104,6 +1141,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1111,11 +1149,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1127,10 +1167,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig index 70693588031e..69c43e2d8b45 100644 --- a/arch/m68k/configs/multi_defconfig +++ b/arch/m68k/configs/multi_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:48 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:06 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -146,12 +157,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -268,6 +280,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -276,6 +289,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -286,6 +300,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -364,25 +379,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -408,8 +418,10 @@ CONFIG_IPDDP_DECAP=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -420,8 +432,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -454,6 +466,7 @@ CONFIG_PARPORT_NOT_PC=y CONFIG_BLK_DEV=y CONFIG_AMIGA_FLOPPY=y CONFIG_ATARI_FLOPPY=y +CONFIG_BLK_DEV_SWIM=y CONFIG_AMIGA_Z2RAM=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y @@ -469,15 +482,20 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y @@ -485,7 +503,6 @@ CONFIG_IDE_GD_ATA=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -494,7 +511,6 @@ CONFIG_IDE_PROC_FS=y # # CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_GAYLE=y -CONFIG_BLK_DEV_IDEDOUBLER=y CONFIG_BLK_DEV_BUDDHA=y CONFIG_BLK_DEV_FALCON_IDE=y CONFIG_BLK_DEV_MAC_IDE=y @@ -549,6 +565,8 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set @@ -575,6 +593,7 @@ CONFIG_MVME16x_SCSI=y CONFIG_BVME6000_SCSI=y CONFIG_SUN3X_ESP=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -582,7 +601,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -604,6 +623,7 @@ CONFIG_ADB_CUDA=y CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -614,24 +634,26 @@ CONFIG_VETH=m # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -CONFIG_ARIADNE=m -CONFIG_A2065=m -CONFIG_HYDRA=m -CONFIG_ZORRO8390=m -CONFIG_APNE=m +CONFIG_ARIADNE=y +CONFIG_A2065=y +CONFIG_HYDRA=y +CONFIG_ZORRO8390=y +CONFIG_APNE=y CONFIG_MAC8390=y -CONFIG_MAC89x0=m -CONFIG_MACSONIC=m +CONFIG_MAC89x0=y +CONFIG_MACSONIC=y CONFIG_MACMACE=y CONFIG_MVME147_NET=y CONFIG_MVME16x_NET=y CONFIG_BVME6000_NET=y -CONFIG_ATARILANCE=m +CONFIG_ATARILANCE=y CONFIG_SUN3LANCE=y CONFIG_HPLANCE=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set +# CONFIG_ETHOC is not set # CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_DNET is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set @@ -657,7 +679,10 @@ CONFIG_NE2000=m # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PLIP is not set CONFIG_PPP=m @@ -717,11 +742,10 @@ CONFIG_KEYBOARD_ATARI=y CONFIG_KEYBOARD_HIL_OLD=y CONFIG_KEYBOARD_HIL=y CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -732,7 +756,7 @@ CONFIG_MOUSE_SERIAL=m CONFIG_MOUSE_AMIGA=m CONFIG_MOUSE_ATARI=m # CONFIG_MOUSE_VSXXXAA is not set -CONFIG_MOUSE_HIL=m +CONFIG_MOUSE_HIL=y CONFIG_INPUT_JOYSTICK=y # CONFIG_JOYSTICK_ANALOG is not set # CONFIG_JOYSTICK_A3D is not set @@ -763,18 +787,18 @@ CONFIG_JOYSTICK_AMIGA=m CONFIG_INPUT_MISC=y CONFIG_INPUT_M68K_BEEP=m # CONFIG_INPUT_UINPUT is not set -CONFIG_HP_SDC_RTC=m +CONFIG_HP_SDC_RTC=y # # Hardware I/O ports # CONFIG_SERIO=y # CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_Q40KBD=m +CONFIG_SERIO_Q40KBD=y # CONFIG_SERIO_PARKBD is not set CONFIG_HP_SDC=y CONFIG_HIL_MLC=y -CONFIG_SERIO_LIBPS2=y +CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set @@ -788,7 +812,7 @@ CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set -CONFIG_A2232=m +CONFIG_A2232=y # # Serial drivers @@ -799,6 +823,7 @@ CONFIG_A2232=m # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=m @@ -807,7 +832,7 @@ CONFIG_PRINTER=m # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y -CONFIG_GEN_RTC=m +CONFIG_GEN_RTC=y CONFIG_GEN_RTC_X=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -898,6 +923,7 @@ CONFIG_FB_HP300=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -937,7 +963,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -948,13 +973,12 @@ CONFIG_HID_COMPAT=y # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices # -CONFIG_ATARI_MFPSER=m -CONFIG_ATARI_MIDI=m +CONFIG_ATARI_MFPSER=y +CONFIG_ATARI_MIDI=y CONFIG_ATARI_DSP56K=m CONFIG_AMIGA_BUILTIN_SERIAL=y CONFIG_MULTIFACE_III_TTY=m @@ -974,6 +998,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -1000,13 +1025,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -1014,6 +1041,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1045,10 +1077,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=y @@ -1057,6 +1086,9 @@ CONFIG_HFSPLUS_FS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -1067,6 +1099,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1083,7 +1116,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1163,11 +1195,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -1188,13 +1215,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1264,6 +1299,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1271,11 +1307,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=y CONFIG_CRC_T10DIF=y @@ -1287,10 +1325,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig index 52d42715bd0b..7dceb5d71223 100644 --- a/arch/m68k/configs/mvme147_defconfig +++ b/arch/m68k/configs/mvme147_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:50 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:08 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -143,12 +154,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -258,6 +270,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -266,6 +279,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -276,6 +290,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -354,25 +369,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -394,8 +404,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -406,8 +418,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -443,9 +455,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -493,9 +509,12 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set CONFIG_MVME147_SCSI=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -503,7 +522,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -516,6 +535,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -526,6 +546,8 @@ CONFIG_VETH=m CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_MVME147_NET=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -542,7 +564,10 @@ CONFIG_MVME147_NET=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -600,7 +625,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -640,6 +664,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -716,7 +741,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -724,9 +748,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -741,6 +765,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -767,13 +792,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -781,6 +808,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -812,10 +844,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -824,6 +853,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -834,6 +866,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -850,7 +883,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -926,11 +958,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -951,13 +978,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1027,6 +1062,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1034,11 +1070,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1050,10 +1088,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index 3403ed2eda79..890594fcacb3 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:51 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:10 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -143,12 +154,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -258,6 +270,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -266,6 +279,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -276,6 +290,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -354,25 +369,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -394,8 +404,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -406,8 +418,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -443,9 +455,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -493,10 +509,13 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set CONFIG_53C700_BE_BUS=y # CONFIG_SCSI_DEBUG is not set CONFIG_MVME16x_SCSI=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -504,7 +523,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -517,6 +536,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -527,6 +547,8 @@ CONFIG_VETH=m CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_MVME16x_NET=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -543,7 +565,10 @@ CONFIG_MVME16x_NET=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -601,7 +626,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -641,6 +665,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -717,7 +742,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -725,9 +749,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -743,6 +767,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -769,13 +794,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -783,6 +810,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -814,10 +846,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -826,6 +855,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -836,6 +868,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -852,7 +885,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -928,11 +960,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -953,13 +980,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1029,6 +1064,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1036,11 +1072,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1052,10 +1090,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig index 3459c594194b..7cf58c27ff84 100644 --- a/arch/m68k/configs/q40_defconfig +++ b/arch/m68k/configs/q40_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:52 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:13 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -140,12 +151,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -255,6 +267,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -263,6 +276,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -273,6 +287,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -351,25 +366,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -391,8 +401,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -403,8 +415,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -441,15 +453,20 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y @@ -457,7 +474,6 @@ CONFIG_IDE_GD_ATA=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -516,6 +532,8 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set @@ -527,6 +545,7 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -534,7 +553,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -547,6 +566,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -559,7 +579,9 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set +# CONFIG_ETHOC is not set # CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_DNET is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set @@ -584,7 +606,10 @@ CONFIG_NE2000=m # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -642,7 +667,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -688,6 +712,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -771,6 +796,7 @@ CONFIG_FB_Q40=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -805,7 +831,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -813,9 +838,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -828,6 +853,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -854,13 +880,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -868,6 +896,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -899,10 +932,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -911,6 +941,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -921,6 +954,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -936,7 +970,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1011,11 +1044,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -1036,13 +1064,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1112,6 +1148,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1119,11 +1156,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1135,10 +1174,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index f404917429fa..f27c1a47bacf 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:53 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:16 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -138,12 +149,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -253,6 +265,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -261,6 +274,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -271,6 +285,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -349,25 +364,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -389,8 +399,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -401,8 +413,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -438,9 +450,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -488,9 +504,12 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set CONFIG_SUN3_SCSI=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -498,7 +517,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -511,6 +530,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -522,6 +542,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_SUN3LANCE=y CONFIG_SUN3_82586=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -537,7 +559,10 @@ CONFIG_SUN3_82586=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -595,7 +620,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -635,6 +659,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -710,6 +735,7 @@ CONFIG_FB=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -741,16 +767,15 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -763,6 +788,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -789,13 +815,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -803,6 +831,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -834,10 +867,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -846,6 +876,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -856,6 +889,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -872,7 +906,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -948,11 +981,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -973,13 +1001,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1049,6 +1085,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1056,11 +1093,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1072,9 +1111,12 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig index 4d8a1e84e39f..c40edb919fda 100644 --- a/arch/m68k/configs/sun3x_defconfig +++ b/arch/m68k/configs/sun3x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:54 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:20 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -140,12 +151,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -255,6 +267,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -263,6 +276,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -273,6 +287,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -351,25 +366,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -391,8 +401,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -403,8 +415,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -440,9 +452,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -490,9 +506,12 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set CONFIG_SUN3X_ESP=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -500,7 +519,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -513,6 +532,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -523,6 +543,8 @@ CONFIG_VETH=m CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_SUN3LANCE=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -539,7 +561,10 @@ CONFIG_SUN3LANCE=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -597,7 +622,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -637,6 +661,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -718,6 +743,7 @@ CONFIG_FB=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -749,7 +775,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -757,9 +782,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -772,6 +797,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -798,13 +824,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -812,6 +840,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -843,10 +876,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -855,6 +885,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -865,6 +898,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -881,7 +915,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -957,11 +990,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -982,13 +1010,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1058,6 +1094,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1065,11 +1102,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1081,10 +1120,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.2 From 6298c512bc1007c3ff5c9ce20e6996781651cc45 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Thu, 9 Apr 2009 12:28:22 +0200 Subject: x86, mce: make polling timer interval per CPU The polling timer while running per CPU still uses a global next_interval variable, which lead to some CPUs either polling too fast or too slow. This was not a serious problem because all errors get picked up eventually, but it's still better to avoid it. Turn next_interval into a per cpu variable. v2: Fix check_interval == 0 case (Hidetoshi Seto) [ Impact: minor bug fix ] Signed-off-by: Andi Kleen Reviewed-by: Hidetoshi Seto Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/mcheck/mce_64.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c index 863f89568b1a..82614f1b923a 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_64.c @@ -452,13 +452,14 @@ void mce_log_therm_throt_event(__u64 status) */ static int check_interval = 5 * 60; /* 5 minutes */ -static int next_interval; /* in jiffies */ +static DEFINE_PER_CPU(int, next_interval); /* in jiffies */ static void mcheck_timer(unsigned long); static DEFINE_PER_CPU(struct timer_list, mce_timer); static void mcheck_timer(unsigned long data) { struct timer_list *t = &per_cpu(mce_timer, data); + int *n; WARN_ON(smp_processor_id() != data); @@ -470,14 +471,14 @@ static void mcheck_timer(unsigned long data) * Alert userspace if needed. If we logged an MCE, reduce the * polling interval, otherwise increase the polling interval. */ + n = &__get_cpu_var(next_interval); if (mce_notify_user()) { - next_interval = max(next_interval/2, HZ/100); + *n = max(*n/2, HZ/100); } else { - next_interval = min(next_interval * 2, - (int)round_jiffies_relative(check_interval*HZ)); + *n = min(*n*2, (int)round_jiffies_relative(check_interval*HZ)); } - t->expires = jiffies + next_interval; + t->expires = jiffies + *n; add_timer(t); } @@ -632,14 +633,13 @@ static void mce_cpu_features(struct cpuinfo_x86 *c) static void mce_init_timer(void) { struct timer_list *t = &__get_cpu_var(mce_timer); + int *n = &__get_cpu_var(next_interval); - /* data race harmless because everyone sets to the same value */ - if (!next_interval) - next_interval = check_interval * HZ; - if (!next_interval) + *n = check_interval * HZ; + if (!*n) return; setup_timer(t, mcheck_timer, smp_processor_id()); - t->expires = round_jiffies(jiffies + next_interval); + t->expires = round_jiffies(jiffies + *n); add_timer(t); } @@ -907,7 +907,6 @@ static void mce_cpu_restart(void *data) /* Reinit MCEs after user configuration changes */ static void mce_restart(void) { - next_interval = check_interval * HZ; on_each_cpu(mce_cpu_restart, NULL, 1); } @@ -1110,7 +1109,8 @@ static int __cpuinit mce_cpu_callback(struct notifier_block *nfb, break; case CPU_DOWN_FAILED: case CPU_DOWN_FAILED_FROZEN: - t->expires = round_jiffies(jiffies + next_interval); + t->expires = round_jiffies(jiffies + + __get_cpu_var(next_interval)); add_timer_on(t, cpu); smp_call_function_single(cpu, mce_reenable_cpu, &action, 1); break; -- cgit v1.2.2 From 5679af4c1625a1534a4321e1ecc3c48a1cf65eb8 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 7 Apr 2009 17:06:55 +0200 Subject: x86, mce: fix boot logging logic The earlier patch to change the poller to a separate function subtly broke the boot logging logic. This could lead to machine checks getting logged at boot even when disabled or defaulting to off on some systems. Fix that. [ Impact: bug fix - avoid spurious MCE in log ] Signed-off-by: Andi Kleen Reviewed-by: Hidetoshi Seto Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/mce.h | 1 + arch/x86/kernel/cpu/mcheck/mce_64.c | 9 +++++---- 2 files changed, 6 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index 563933e06a35..4f8c199584e7 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -137,6 +137,7 @@ DECLARE_PER_CPU(mce_banks_t, mce_poll_banks); enum mcp_flags { MCP_TIMESTAMP = (1 << 0), /* log time stamp */ MCP_UC = (1 << 1), /* log uncorrected errors */ + MCP_DONTLOG = (1 << 2), /* only clear, don't log */ }; extern void machine_check_poll(enum mcp_flags flags, mce_banks_t *b); diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c index 82614f1b923a..6fb0b359d2a5 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_64.c @@ -239,9 +239,10 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b) * Don't get the IP here because it's unlikely to * have anything to do with the actual error location. */ - - mce_log(&m); - add_taint(TAINT_MACHINE_CHECK); + if (!(flags & MCP_DONTLOG)) { + mce_log(&m); + add_taint(TAINT_MACHINE_CHECK); + } /* * Clear state for this bank. @@ -585,7 +586,7 @@ static void mce_init(void *dummy) * Log the machine checks left over from the previous reset. */ bitmap_fill(all_banks, MAX_NR_BANKS); - machine_check_poll(MCP_UC, &all_banks); + machine_check_poll(MCP_UC|(!mce_bootlog ? MCP_DONTLOG : 0), &all_banks); set_in_cr4(X86_CR4_MCE); -- cgit v1.2.2 From 044cd80942e47b9de0915b627902adf05c52377f Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 18 Apr 2009 01:43:46 -0700 Subject: x86/PCI: don't call e820_all_mapped with -1 in the mmconfig case e820_all_mapped need end is (addr + size) instead of (addr + size - 1) Cc: stable@kernel.org Acked-by: Ingo Molnar Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- arch/x86/pci/mmconfig-shared.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c index 905bb526b133..5fa10bb9604f 100644 --- a/arch/x86/pci/mmconfig-shared.c +++ b/arch/x86/pci/mmconfig-shared.c @@ -375,7 +375,7 @@ static acpi_status __init check_mcfg_resource(struct acpi_resource *res, if (!fixmem32) return AE_OK; if ((mcfg_res->start >= fixmem32->address) && - (mcfg_res->end < (fixmem32->address + + (mcfg_res->end <= (fixmem32->address + fixmem32->address_length))) { mcfg_res->flags = 1; return AE_CTRL_TERMINATE; @@ -392,7 +392,7 @@ static acpi_status __init check_mcfg_resource(struct acpi_resource *res, return AE_OK; if ((mcfg_res->start >= address.minimum) && - (mcfg_res->end < (address.minimum + address.address_length))) { + (mcfg_res->end <= (address.minimum + address.address_length))) { mcfg_res->flags = 1; return AE_CTRL_TERMINATE; } @@ -439,7 +439,7 @@ static int __init is_mmconf_reserved(check_reserved_t is_reserved, u64 old_size = size; int valid = 0; - while (!is_reserved(addr, addr + size - 1, E820_RESERVED)) { + while (!is_reserved(addr, addr + size, E820_RESERVED)) { size >>= 1; if (size < (16UL<<20)) break; -- cgit v1.2.2 From 0bb1be3e30bfc3e09fa0ff1e887ac7da4a16c3a2 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Thu, 16 Apr 2009 13:31:10 -0600 Subject: x86/PCI: Move set_pci_bus_resources_arch_default into arch/x86 Commit 30a18d6c3f1e774de656ebd8ff219d53e2ba4029 introduced a new function to set the PCI bus resources. Unfortunately, neither the author, nor the committers seemed to know that we already have somewhere to do that -- pcibios_fixup_bus(). This patch moves the hook (used only by the K8 code) into x86-specific code where it should have been in the first place. Cc: Yinghai Lu Signed-off-by: Matthew Wilcox Acked-by: Ingo Molnar Signed-off-by: Jesse Barnes --- arch/x86/pci/common.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 8c362b96b644..f80ece51305d 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -142,15 +142,20 @@ static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev) } } +void __attribute__((weak)) set_pci_bus_resources_arch_default(struct pci_bus *b) +{ +} + /* * Called after each bus is probed, but before its children * are examined. */ -void __devinit pcibios_fixup_bus(struct pci_bus *b) +void __devinit pcibios_fixup_bus(struct pci_bus *b) { struct pci_dev *dev; + set_pci_bus_resources_arch_default(b); pci_read_bridge_bases(b); list_for_each_entry(dev, &b->devices, bus_list) pcibios_fixup_device_resources(dev); -- cgit v1.2.2 From 0e94ecd098347874e776f7818728613a335880d1 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 18 Apr 2009 10:11:25 -0700 Subject: x86/PCI: set_pci_bus_resources_arch_default cleanups Rename set_pci_bus_resources_arch_default to x86_pci_root_bus_res_quirks, move the weak version from common.c to i386.c, and before calling, make sure it's a root bus. Reviewed-by: Matthew Wilcox Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- arch/x86/include/asm/topology.h | 2 +- arch/x86/pci/amd_bus.c | 2 +- arch/x86/pci/common.c | 8 +++----- arch/x86/pci/i386.c | 4 ++++ 4 files changed, 9 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h index 892b119dba6f..f44b49abca49 100644 --- a/arch/x86/include/asm/topology.h +++ b/arch/x86/include/asm/topology.h @@ -200,7 +200,7 @@ static inline void arch_fix_phys_package_id(int num, u32 slot) } struct pci_bus; -void set_pci_bus_resources_arch_default(struct pci_bus *b); +void x86_pci_root_bus_res_quirks(struct pci_bus *b); #ifdef CONFIG_SMP #define mc_capable() (cpumask_weight(cpu_core_mask(0)) != nr_cpu_ids) diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c index 9bb09823b362..e121ee050f7c 100644 --- a/arch/x86/pci/amd_bus.c +++ b/arch/x86/pci/amd_bus.c @@ -94,7 +94,7 @@ struct pci_root_info { static int pci_root_num; static struct pci_root_info pci_root_info[PCI_ROOT_NR]; -void set_pci_bus_resources_arch_default(struct pci_bus *b) +void x86_pci_root_bus_res_quirks(struct pci_bus *b) { int i; int j; diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index f80ece51305d..2202b6257b82 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -142,10 +142,6 @@ static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev) } } -void __attribute__((weak)) set_pci_bus_resources_arch_default(struct pci_bus *b) -{ -} - /* * Called after each bus is probed, but before its children * are examined. @@ -155,7 +151,9 @@ void __devinit pcibios_fixup_bus(struct pci_bus *b) { struct pci_dev *dev; - set_pci_bus_resources_arch_default(b); + /* root bus? */ + if (!b->parent) + x86_pci_root_bus_res_quirks(b); pci_read_bridge_bases(b); list_for_each_entry(dev, &b->devices, bus_list) pcibios_fixup_device_resources(dev); diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c index f1817f71e009..a85bef20a3b9 100644 --- a/arch/x86/pci/i386.c +++ b/arch/x86/pci/i386.c @@ -238,6 +238,10 @@ void __init pcibios_resource_survey(void) */ fs_initcall(pcibios_assign_resources); +void __weak x86_pci_root_bus_res_quirks(struct pci_bus *b) +{ +} + /* * If we set up a device for bus mastering, we need to check the latency * timer as certain crappy BIOSes forget to set it properly. -- cgit v1.2.2 From b10ceb5530df7ee6e81f92910589a34dd3e5690b Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 20 Apr 2009 18:35:40 -0700 Subject: x86/PCI: don't bother with root quirks if _CRS is used It will be overwriten later if _CRS is used, so don't bother to set it. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- arch/x86/pci/amd_bus.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c index e121ee050f7c..f893d6a6e803 100644 --- a/arch/x86/pci/amd_bus.c +++ b/arch/x86/pci/amd_bus.c @@ -100,6 +100,10 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b) int j; struct pci_root_info *info; + /* don't go for it if _CRS is used */ + if (pci_probe & PCI_USE__CRS) + return; + /* if only one root bus, don't need to anything */ if (pci_root_num < 2) return; -- cgit v1.2.2 From 64f68416e794d59a42ddffdf1c5b7f026a4f23d5 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Thu, 23 Apr 2009 09:23:32 +1000 Subject: m68knommu: update the default config for the ColdFire 5407C3 board Signed-off-by: Greg Ungerer --- arch/m68knommu/configs/m5407c3_defconfig | 179 +++++++++++++++++-------------- 1 file changed, 98 insertions(+), 81 deletions(-) (limited to 'arch') diff --git a/arch/m68knommu/configs/m5407c3_defconfig b/arch/m68knommu/configs/m5407c3_defconfig index 1118936d20e3..97b6cde2fc19 100644 --- a/arch/m68knommu/configs/m5407c3_defconfig +++ b/arch/m68knommu/configs/m5407c3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc1 -# Wed May 7 10:25:16 2008 +# Linux kernel version: 2.6.30-rc2 +# Thu Apr 23 09:21:40 2009 # CONFIG_M68K=y # CONFIG_MMU is not set @@ -16,9 +16,10 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_TIME_LOW_RES=y +# CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_NO_IOPORT=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -34,10 +35,19 @@ CONFIG_LOCALVERSION_AUTO=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set @@ -45,44 +55,43 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y -# CONFIG_UID16 is not set -# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set +# CONFIG_AIO is not set # CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLAB=y -# CONFIG_SLUB is not set +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -96,7 +105,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Processor type and features @@ -149,45 +158,36 @@ CONFIG_RAMAUTOBIT=y # CONFIG_ROM is not set CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +# CONFIG_UNEVICTABLE_LRU is not set CONFIG_ISA_DMA_API=y -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_PCI is not set -# CONFIG_COMEMPCI is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set - # # Executable file formats # CONFIG_BINFMT_FLAT=y # CONFIG_BINFMT_ZFLAT is not set # CONFIG_BINFMT_SHARED_FLAT is not set -# CONFIG_BINFMT_AOUT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set - -# -# Networking -# CONFIG_NET=y # @@ -228,6 +228,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -237,7 +238,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -248,14 +251,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -274,6 +271,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_AR7_PARTS is not set @@ -334,6 +332,11 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # @@ -349,6 +352,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -362,7 +366,7 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_NETLINK is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -372,10 +376,15 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -385,8 +394,10 @@ CONFIG_NET_ETHERNET=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=y # CONFIG_PPP_MULTILINK is not set @@ -409,39 +420,22 @@ CONFIG_SLHC=y # # Input device support # -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +# CONFIG_INPUT is not set # # Hardware I/O ports # -# CONFIG_SERIO is not set +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # # Character devices # # CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -454,7 +448,6 @@ CONFIG_INPUT=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_COLDFIRE is not set CONFIG_SERIAL_MCF=y CONFIG_SERIAL_MCF_BAUDRATE=19200 CONFIG_SERIAL_MCF_CONSOLE=y @@ -473,19 +466,23 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -496,6 +493,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers @@ -514,19 +512,17 @@ CONFIG_DAB=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set -# CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -534,12 +530,14 @@ CONFIG_DAB=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +# CONFIG_FILE_LOCKING is not set # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set @@ -547,6 +545,11 @@ CONFIG_EXT2_FS=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -569,10 +572,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -582,13 +582,20 @@ CONFIG_SYSFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +# CONFIG_ROMFS_BACKED_BY_BLOCK is not set +CONFIG_ROMFS_BACKED_BY_MTD=y +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_MTD=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # @@ -611,11 +618,17 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # CONFIG_FULLDEBUG is not set # CONFIG_HIGHPROFILE is not set -# CONFIG_BOOTPARAM is not set +CONFIG_BOOTPARAM=y +CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0" # CONFIG_NO_KERNEL_MSG is not set # CONFIG_BDM_DISABLE is not set @@ -624,18 +637,22 @@ CONFIG_FRAME_WARN=1024 # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.2 From c8088112fd96ad8b0f0bcd2f168fe6a17bf3cb41 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 22 Apr 2009 19:48:53 -0600 Subject: OMAP2xxx clock: pre-initialize struct clks early Commit 3f0a820c4c0b4670fb5f164baa5582e23c2ef118 breaks OMAP2xxx boot during initial propagate_rate() on osc_ck and sys_ck. Fix by pre-initializing all struct clks before running any other clock init code. Incorporates review comments from Russell King . Resolves <1>Unable to handle kernel NULL pointer dereference at virtual address 00000000 <1>pgd = c0004000 <1>[00000000] *pgd=00000000 Internal error: Oops: 5 [#1] Modules linked in: CPU: 0 Not tainted (2.6.29-omap1 #37) PC is at propagate_rate+0x10/0x60 LR is at omap2_clk_init+0x30/0x218 ... Signed-off-by: Paul Walmsley Tested-by: Jarkko Nikula Cc: Russell King --- arch/arm/mach-omap2/clock24xx.c | 6 +++--- arch/arm/plat-omap/clock.c | 7 +++++++ 2 files changed, 10 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 1e839c5a28c5..984fb86349ba 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -720,14 +720,14 @@ int __init omap2_clk_init(void) clk_init(&omap2_clk_functions); + for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) + clk_init_one(c->lk.clk); + osc_ck.rate = omap2_osc_clk_recalc(&osc_ck); propagate_rate(&osc_ck); sys_ck.rate = omap2_sys_clk_recalc(&sys_ck); propagate_rate(&sys_ck); - for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) - clk_init_one(c->lk.clk); - cpu_mask = 0; if (cpu_is_omap2420()) cpu_mask |= CK_242X; diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 2e0614552ac8..29efc279287a 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -239,6 +239,13 @@ void recalculate_root_clocks(void) } } +/** + * clk_init_one - initialize any fields in the struct clk before clk init + * @clk: struct clk * to initialize + * + * Initialize any struct clk fields needed before normal clk initialization + * can run. No return value. + */ void clk_init_one(struct clk *clk) { INIT_LIST_HEAD(&clk->children); -- cgit v1.2.2 From 4c31e92b97b6d7e7b19ee5e54a22571ffdebb305 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 22 Apr 2009 14:19:27 -0700 Subject: x86: check boundary in setup_node_bootmem() Commit dc09855 ("x86/uv: fix init of memory-less nodes") causes a two sockets system (where node-1 doesn't have RAM installed) to crash. That commit makes node_possible include cpu nodes that do not have memory. So check boundary in setup_node_bootmem(). [ Impact: fix boot crash on RAM-less NUMA node system ] Signed-off-by: Yinghai Lu Cc: Jack Steiner LKML-Reference: <49EF89DF.9090404@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/mm/numa_64.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index d73aaa892371..2d05a12029dc 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -188,6 +188,9 @@ void __init setup_node_bootmem(int nodeid, unsigned long start, const int pgdat_size = roundup(sizeof(pg_data_t), PAGE_SIZE); int nid; + if (!end) + return; + start = roundup(start, ZONE_ALIGN); printk(KERN_INFO "Bootmem setup node %d %016lx-%016lx\n", nodeid, -- cgit v1.2.2 From 3bd5f3ef290627efa3c219fa21a82eea90bc4cb0 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 23 Apr 2009 13:58:06 +0200 Subject: [S390] ipl: fix compile breakage Fix this for !CONFIG_SMP: arch/s390/kernel/ipl.c: In function 'stop_run': arch/s390/kernel/ipl.c:1461: error: implicit declaration of function 'signal_processor' Reported-by: Sachin Sant Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/ipl.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index 6f3711a0eaaa..b8bf4b140065 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #define IPL_PARM_BLOCK_VERSION 0 -- cgit v1.2.2 From b1ad171efa089ae26aba750d747d8149a4f860d5 Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Thu, 23 Apr 2009 13:58:07 +0200 Subject: [S390] appldata: avoid deadlock with appldata_mem The appldata_ops callbacks are called with a spin_lock held. But the appldata_mem callback then calls all_vm_events(), which calls get_online_cpus(), which might sleep. This possible deadlock is fixed by using a mutex instead of a spin_lock. Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky --- arch/s390/appldata/appldata_base.c | 32 ++++++++++++++++---------------- arch/s390/appldata/appldata_mem.c | 2 +- 2 files changed, 17 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index aeb3cff95f63..1dfc7100c7ee 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -98,7 +98,7 @@ static DECLARE_WORK(appldata_work, appldata_work_fn); /* * Ops list */ -static DEFINE_SPINLOCK(appldata_ops_lock); +static DEFINE_MUTEX(appldata_ops_mutex); static LIST_HEAD(appldata_ops_list); @@ -129,14 +129,14 @@ static void appldata_work_fn(struct work_struct *work) i = 0; get_online_cpus(); - spin_lock(&appldata_ops_lock); + mutex_lock(&appldata_ops_mutex); list_for_each(lh, &appldata_ops_list) { ops = list_entry(lh, struct appldata_ops, list); if (ops->active == 1) { ops->callback(ops->data); } } - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); put_online_cpus(); } @@ -338,7 +338,7 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp, struct list_head *lh; found = 0; - spin_lock(&appldata_ops_lock); + mutex_lock(&appldata_ops_mutex); list_for_each(lh, &appldata_ops_list) { tmp_ops = list_entry(lh, struct appldata_ops, list); if (&tmp_ops->ctl_table[2] == ctl) { @@ -346,15 +346,15 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp, } } if (!found) { - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); return -ENODEV; } ops = ctl->data; if (!try_module_get(ops->owner)) { // protect this function - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); return -ENODEV; } - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); if (!*lenp || *ppos) { *lenp = 0; @@ -378,11 +378,11 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp, return -EFAULT; } - spin_lock(&appldata_ops_lock); + mutex_lock(&appldata_ops_mutex); if ((buf[0] == '1') && (ops->active == 0)) { // protect work queue callback if (!try_module_get(ops->owner)) { - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); module_put(ops->owner); return -ENODEV; } @@ -407,7 +407,7 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp, "failed with rc=%d\n", ops->name, rc); module_put(ops->owner); } - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); out: *lenp = len; *ppos += len; @@ -433,9 +433,9 @@ int appldata_register_ops(struct appldata_ops *ops) if (!ops->ctl_table) return -ENOMEM; - spin_lock(&appldata_ops_lock); + mutex_lock(&appldata_ops_mutex); list_add(&ops->list, &appldata_ops_list); - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); ops->ctl_table[0].procname = appldata_proc_name; ops->ctl_table[0].maxlen = 0; @@ -452,9 +452,9 @@ int appldata_register_ops(struct appldata_ops *ops) goto out; return 0; out: - spin_lock(&appldata_ops_lock); + mutex_lock(&appldata_ops_mutex); list_del(&ops->list); - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); kfree(ops->ctl_table); return -ENOMEM; } @@ -466,9 +466,9 @@ out: */ void appldata_unregister_ops(struct appldata_ops *ops) { - spin_lock(&appldata_ops_lock); + mutex_lock(&appldata_ops_mutex); list_del(&ops->list); - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); unregister_sysctl_table(ops->sysctl_header); kfree(ops->ctl_table); } diff --git a/arch/s390/appldata/appldata_mem.c b/arch/s390/appldata/appldata_mem.c index 3ed56b7d1b2f..4188cbe63a54 100644 --- a/arch/s390/appldata/appldata_mem.c +++ b/arch/s390/appldata/appldata_mem.c @@ -78,7 +78,7 @@ static void appldata_get_mem_data(void *data) { /* * don't put large structures on the stack, we are - * serialized through the appldata_ops_lock and can use static + * serialized through the appldata_ops_mutex and can use static */ static struct sysinfo val; unsigned long ev[NR_VM_EVENT_ITEMS]; -- cgit v1.2.2 From e1c805309d19c69d4ebeac38724076fa86feacdf Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 23 Apr 2009 13:58:08 +0200 Subject: [S390] /proc/stat idle field for idle cpus The cpu idle field in the output of /proc/stat is too small for cpus that have been idle for more than a tick. Add the architecture hook arch_idle_time that allows to add the not accounted idle time of a sleeping cpu without waking the cpu. The s390 implementation of arch_idle_time uses the already existing s390_idle_data per_cpu variable to find the sleep time of a neighboring idle cpu. Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/cputime.h | 4 ++++ arch/s390/kernel/vtime.c | 16 ++++++++++++++++ 2 files changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h index 95b0f7db3c69..941384fbd39c 100644 --- a/arch/s390/include/asm/cputime.h +++ b/arch/s390/include/asm/cputime.h @@ -174,4 +174,8 @@ cputime64_to_clock_t(cputime64_t cputime) return __div(cputime, 4096000000ULL / USER_HZ); } +cputime64_t s390_get_idle_time(int cpu); + +#define arch_idle_time(cpu) s390_get_idle_time(cpu) + #endif /* _S390_CPUTIME_H */ diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index 38ea92ff04f9..c87f59bd8246 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -240,6 +240,22 @@ void vtime_stop_cpu(void) } } +cputime64_t s390_get_idle_time(int cpu) +{ + struct s390_idle_data *idle; + unsigned long long now, idle_time, idle_enter; + + idle = &per_cpu(s390_idle, cpu); + spin_lock(&idle->lock); + now = get_clock(); + idle_time = 0; + idle_enter = idle->idle_enter; + if (idle_enter != 0ULL && idle_enter < now) + idle_time = now - idle_enter; + spin_unlock(&idle->lock); + return idle_time; +} + /* * Sorted add to a list. List is linear searched until first bigger * element is found. -- cgit v1.2.2 From e655dc8873b2390d92888095af6adad822a8b386 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 23 Apr 2009 13:58:11 +0200 Subject: [S390] update default configuration. Signed-off-by: Martin Schwidefsky --- arch/s390/defconfig | 63 ++++++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 50 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/s390/defconfig b/arch/s390/defconfig index 31e809c77790..d401d56c255f 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc4 -# Wed Feb 11 10:07:16 2009 +# Linux kernel version: 2.6.30-rc3 +# Thu Apr 23 09:29:52 2009 # CONFIG_SCHED_MC=y CONFIG_MMU=y @@ -22,6 +22,7 @@ CONFIG_NO_DMA=y CONFIG_GENERIC_LOCKBREAK=y CONFIG_PGSTE=y CONFIG_VIRT_CPU_ACCOUNTING=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_S390=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -37,6 +38,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set CONFIG_AUDIT=y @@ -77,21 +79,24 @@ CONFIG_IPC_NS=y # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -99,10 +104,12 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y CONFIG_HAVE_SYSCALL_WRAPPERS=y @@ -111,6 +118,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DEFAULT_NO_SPIN_MUTEXES=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -124,7 +133,6 @@ CONFIG_MODVERSIONS=y CONFIG_INIT_ALL_POSSIBLE=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y @@ -211,11 +219,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # I/O subsystem configuration # -CONFIG_MACHCHK_WARNING=y CONFIG_QDIO=y CONFIG_CHSC_SCH=m @@ -247,12 +256,12 @@ CONFIG_S390_HYPFS_FS=y CONFIG_KEXEC=y # CONFIG_ZFCPDUMP is not set CONFIG_S390_GUEST=y +CONFIG_SECCOMP=y CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -374,6 +383,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set CONFIG_NET_SCHED=y # @@ -438,7 +448,6 @@ CONFIG_CAN_BCM=m CONFIG_CAN_VCAN=m # CONFIG_CAN_DEBUG_DEVICES is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -537,6 +546,7 @@ CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set CONFIG_ZFCP=y CONFIG_SCSI_DH=m @@ -544,6 +554,10 @@ CONFIG_SCSI_DH_RDAC=m CONFIG_SCSI_DH_HP_SW=m CONFIG_SCSI_DH_EMC=m CONFIG_SCSI_DH_ALUA=m +CONFIG_SCSI_OSD_INITIATOR=m +CONFIG_SCSI_OSD_ULD=m +CONFIG_SCSI_OSD_DPRINT_SENSE=1 +# CONFIG_SCSI_OSD_DEBUG is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_AUTODETECT=y @@ -564,6 +578,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set # CONFIG_DM_UEVENT is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_IFB is not set CONFIG_DUMMY=m CONFIG_BONDING=m @@ -667,6 +682,7 @@ CONFIG_S390_VMUR=m # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set CONFIG_ACCESSIBILITY=y +# CONFIG_AUXDISPLAY is not set # CONFIG_STAGING is not set # @@ -676,6 +692,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -700,6 +717,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set CONFIG_GENERIC_ACL=y +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -744,6 +766,8 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_EXOFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -758,7 +782,6 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -806,6 +829,7 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y +# CONFIG_DETECT_HUNG_TASK is not set # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -830,7 +854,6 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_FRAME_POINTER is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set @@ -840,7 +863,9 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -850,14 +875,17 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set CONFIG_SAMPLES=y # CONFIG_SAMPLE_KOBJECT is not set # CONFIG_SAMPLE_KPROBES is not set -# CONFIG_DEBUG_PAGEALLOC is not set # # Security options @@ -882,10 +910,12 @@ CONFIG_CRYPTO_HASH=m CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=m CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m # CONFIG_CRYPTO_TEST is not set @@ -954,6 +984,7 @@ CONFIG_CRYPTO_SEED=m # Compression # # CONFIG_CRYPTO_DEFLATE is not set +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -969,6 +1000,7 @@ CONFIG_CRYPTO_SHA512_S390=m # CONFIG_CRYPTO_DES_S390 is not set # CONFIG_CRYPTO_AES_S390 is not set CONFIG_S390_PRNG=m +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -982,9 +1014,14 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC32=m CONFIG_CRC7=m CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_NLATTR=y CONFIG_HAVE_KVM=y CONFIG_VIRTUALIZATION=y CONFIG_KVM=m -- cgit v1.2.2 From 323d23aeac4918c7a540b597a26fa7a67645593a Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 23 Apr 2009 08:51:22 -0500 Subject: Revert "powerpc: Add support for early tlbilx opcode" This reverts commit e9965577406a2148ade97b5e0ce7c448b4ba4ef6. Our HW guys were able to fix this so it never sees the light of day. Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/mmu.h | 6 ------ arch/powerpc/include/asm/ppc-opcode.h | 11 +---------- arch/powerpc/kernel/cputable.c | 2 +- arch/powerpc/mm/tlb_nohash_low.S | 14 +------------- 4 files changed, 3 insertions(+), 30 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index 86d2366ab6a1..cbf154387091 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -52,12 +52,6 @@ */ #define MMU_FTR_NEED_DTLB_SW_LRU ASM_CONST(0x00200000) -/* This indicates that the processor uses the wrong opcode for tlbilx - * instructions. During the ISA 2.06 development the opcode for tlbilx - * changed and some early implementations used to old opcode - */ -#define MMU_FTR_TLBILX_EARLY_OPCODE ASM_CONST(0x00400000) - #ifndef __ASSEMBLY__ #include diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h index ef4da37f3c10..640ccbbc0977 100644 --- a/arch/powerpc/include/asm/ppc-opcode.h +++ b/arch/powerpc/include/asm/ppc-opcode.h @@ -44,7 +44,6 @@ #define PPC_INST_STSWI 0x7c0005aa #define PPC_INST_STSWX 0x7c00052a #define PPC_INST_TLBILX 0x7c000024 -#define PPC_INST_TLBILX_EARLY 0x7c000626 #define PPC_INST_WAIT 0x7c00007c /* macros to insert fields into opcodes */ @@ -64,18 +63,10 @@ #define PPC_RFDI stringify_in_c(.long PPC_INST_RFDI) #define PPC_RFMCI stringify_in_c(.long PPC_INST_RFMCI) #define PPC_TLBILX(t, a, b) stringify_in_c(.long PPC_INST_TLBILX | \ - __PPC_T_TLB(t) | \ - __PPC_RA(a) | __PPC_RB(b)) + __PPC_T_TLB(t) | __PPC_RA(a) | __PPC_RB(b)) #define PPC_TLBILX_ALL(a, b) PPC_TLBILX(0, a, b) #define PPC_TLBILX_PID(a, b) PPC_TLBILX(1, a, b) #define PPC_TLBILX_VA(a, b) PPC_TLBILX(3, a, b) - -#define PPC_TLBILX_EARLY(t, a, b) stringify_in_c(.long PPC_INST_TLBILX_EARLY | \ - __PPC_T_TLB(t) | \ - __PPC_RA(a) | __PPC_RB(b)) -#define PPC_TLBILX_ALL_EARLY(a, b) PPC_TLBILX_EARLY(0, a, b) -#define PPC_TLBILX_PID_EARLY(a, b) PPC_TLBILX_EARLY(1, a, b) -#define PPC_TLBILX_VA_EARLY(a, b) PPC_TLBILX_EARLY(3, a, b) #define PPC_WAIT(w) stringify_in_c(.long PPC_INST_WAIT | \ __PPC_WC(w)) diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 57db50f40289..cd1b687544f3 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -1766,7 +1766,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_features = CPU_FTRS_E500MC, .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU, .mmu_features = MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS | - MMU_FTR_USE_TLBILX | MMU_FTR_TLBILX_EARLY_OPCODE, + MMU_FTR_USE_TLBILX, .icache_bsize = 64, .dcache_bsize = 64, .num_pmcs = 4, diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S index 45fed3698349..788b87c36f77 100644 --- a/arch/powerpc/mm/tlb_nohash_low.S +++ b/arch/powerpc/mm/tlb_nohash_low.S @@ -138,11 +138,7 @@ BEGIN_MMU_FTR_SECTION andi. r3,r3,MMUCSR0_TLBFI@l bne 1b MMU_FTR_SECTION_ELSE - BEGIN_MMU_FTR_SECTION_NESTED(96) - PPC_TLBILX_ALL(0,r3) - MMU_FTR_SECTION_ELSE_NESTED(96) - PPC_TLBILX_ALL_EARLY(0,r3) - ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96) + PPC_TLBILX_ALL(0,0) ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX) msync isync @@ -155,11 +151,7 @@ BEGIN_MMU_FTR_SECTION wrteei 0 mfspr r4,SPRN_MAS6 /* save MAS6 */ mtspr SPRN_MAS6,r3 - BEGIN_MMU_FTR_SECTION_NESTED(96) PPC_TLBILX_PID(0,0) - MMU_FTR_SECTION_ELSE_NESTED(96) - PPC_TLBILX_PID_EARLY(0,0) - ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96) mtspr SPRN_MAS6,r4 /* restore MAS6 */ wrtee r10 MMU_FTR_SECTION_ELSE @@ -193,11 +185,7 @@ BEGIN_MMU_FTR_SECTION mtspr SPRN_MAS1,r4 tlbwe MMU_FTR_SECTION_ELSE - BEGIN_MMU_FTR_SECTION_NESTED(96) PPC_TLBILX_VA(0,r3) - MMU_FTR_SECTION_ELSE_NESTED(96) - PPC_TLBILX_VA_EARLY(0,r3) - ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96) ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX) msync isync -- cgit v1.2.2 From b62c31ae401c6df25c61b206681a6e904ef97169 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Thu, 23 Apr 2009 22:56:11 +1000 Subject: powerpc: fix for long standing bug noticed by gcc 4.4.0 Previous gcc versions didn't notice this because one of the preceding #ifs always evaluated to true. gcc 4.4.0 produced this error: arch/powerpc/mm/tlb_nohash_low.S:206:6: error: #elif with no expression Signed-off-by: Stephen Rothwell Acked-by: Josh Boyer Signed-off-by: Kumar Gala --- arch/powerpc/mm/tlb_nohash_low.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S index 788b87c36f77..3037911279b1 100644 --- a/arch/powerpc/mm/tlb_nohash_low.S +++ b/arch/powerpc/mm/tlb_nohash_low.S @@ -191,6 +191,6 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX) isync 1: wrtee r10 blr -#elif +#else #error Unsupported processor type ! #endif -- cgit v1.2.2 From f2ec24fd42d52a52829070b5e31d9a17d145df30 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 10:36:54 +0200 Subject: microblaze: Remove unneded per cpu SYSCALL_SAVE variable Signed-off-by: Michal Simek --- arch/microblaze/include/asm/entry.h | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/microblaze/include/asm/entry.h b/arch/microblaze/include/asm/entry.h index 7f57e42ee467..1019d88b8129 100644 --- a/arch/microblaze/include/asm/entry.h +++ b/arch/microblaze/include/asm/entry.h @@ -29,7 +29,6 @@ DECLARE_PER_CPU(unsigned int, KM); /* Kernel/user mode */ DECLARE_PER_CPU(unsigned int, ENTRY_SP); /* Saved SP on kernel entry */ DECLARE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */ DECLARE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */ -DECLARE_PER_CPU(unsigned int, SYSCALL_SAVE); /* Saved syscall number */ # endif /* __ASSEMBLY__ */ #endif /* _ASM_MICROBLAZE_ENTRY_H */ -- cgit v1.2.2 From 51eb6dc9ca40d086c102bb868ba7f29f33a30f6f Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 10:41:45 +0200 Subject: microblaze: Remove while(1) loop from show_regs function I removed it because of show_regs can't break die function. If process/kernel failed, die (do_exit) function resolve it. Signed-off-by: Michal Simek --- arch/microblaze/kernel/process.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c index 436f26ccbfa9..bdc8b2c6c574 100644 --- a/arch/microblaze/kernel/process.c +++ b/arch/microblaze/kernel/process.c @@ -37,8 +37,6 @@ void show_regs(struct pt_regs *regs) regs->r29, regs->r30, regs->r31, regs->pc); printk(KERN_INFO " msr=%08lX, ear=%08lX, esr=%08lX, fsr=%08lX\n", regs->msr, regs->ear, regs->esr, regs->fsr); - while (1) - ; } void (*pm_idle)(void); -- cgit v1.2.2 From ceb8944b3a3dd3ec4094a476a44802cc32c4fc02 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 10:46:37 +0200 Subject: microblaze: Remove uncache shadow condition Uncached shadow feature is not supported in current kernel code that's why I removed it. Signed-off-by: Michal Simek --- arch/microblaze/include/asm/cache.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/include/asm/cache.h b/arch/microblaze/include/asm/cache.h index c4c64b43c074..c209c47509d5 100644 --- a/arch/microblaze/include/asm/cache.h +++ b/arch/microblaze/include/asm/cache.h @@ -37,9 +37,4 @@ void _invalidate_dcache(unsigned int addr); #define __disable_dcache() _disable_dcache() #define __invalidate_dcache(addr) _invalidate_dcache(addr) -/* FIXME - I don't think this is right */ -#ifdef CONFIG_XILINX_UNCACHED_SHADOW -#define UNCACHED_SHADOW_MASK (CONFIG_XILINX_ERAM_SIZE) -#endif - #endif /* _ASM_MICROBLAZE_CACHE_H */ -- cgit v1.2.2 From ac3efab50621bd6d01e5b40f3134dc7824788390 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 10:58:47 +0200 Subject: microblaze: Rename kernel_mode to pt_mode in pt_regs Signed-off-by: Michal Simek --- arch/microblaze/include/asm/processor.h | 2 +- arch/microblaze/include/asm/ptrace.h | 4 ++-- arch/microblaze/kernel/asm-offsets.c | 2 +- arch/microblaze/kernel/process.c | 4 ++-- 4 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h index d8e15434ba21..4bed76d0a6c4 100644 --- a/arch/microblaze/include/asm/processor.h +++ b/arch/microblaze/include/asm/processor.h @@ -62,7 +62,7 @@ static inline void start_thread(struct pt_regs *regs, { regs->pc = pc; regs->r1 = usp; - regs->kernel_mode = 0; + regs->pt_mode = 0; } /* Free all resources held by a thread. */ diff --git a/arch/microblaze/include/asm/ptrace.h b/arch/microblaze/include/asm/ptrace.h index f1f03486428a..55015bce5e47 100644 --- a/arch/microblaze/include/asm/ptrace.h +++ b/arch/microblaze/include/asm/ptrace.h @@ -52,10 +52,10 @@ struct pt_regs { microblaze_reg_t ear; microblaze_reg_t esr; microblaze_reg_t fsr; - int kernel_mode; + int pt_mode; }; -#define kernel_mode(regs) ((regs)->kernel_mode) +#define kernel_mode(regs) ((regs)->pt_mode) #define user_mode(regs) (!kernel_mode(regs)) #define instruction_pointer(regs) ((regs)->pc) diff --git a/arch/microblaze/kernel/asm-offsets.c b/arch/microblaze/kernel/asm-offsets.c index 38e1a2e8ad0c..aabd9e9423a6 100644 --- a/arch/microblaze/kernel/asm-offsets.c +++ b/arch/microblaze/kernel/asm-offsets.c @@ -57,7 +57,7 @@ int main(int argc, char *argv[]) DEFINE(PT_R29, offsetof(struct pt_regs, r29)); DEFINE(PT_R30, offsetof(struct pt_regs, r30)); DEFINE(PT_R31, offsetof(struct pt_regs, r31)); - DEFINE(PT_MODE, offsetof(struct pt_regs, kernel_mode)); + DEFINE(PT_MODE, offsetof(struct pt_regs, pt_mode)); BLANK(); /* Magic offsets for PTRACE PEEK/POKE etc */ diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c index bdc8b2c6c574..40cc1480810e 100644 --- a/arch/microblaze/kernel/process.c +++ b/arch/microblaze/kernel/process.c @@ -18,7 +18,7 @@ void show_regs(struct pt_regs *regs) { - printk(KERN_INFO " Registers dump: mode=%X\r\n", regs->kernel_mode); + printk(KERN_INFO " Registers dump: mode=%X\r\n", regs->pt_mode); printk(KERN_INFO " r1=%08lX, r2=%08lX, r3=%08lX, r4=%08lX\n", regs->r1, regs->r2, regs->r3, regs->r4); printk(KERN_INFO " r5=%08lX, r6=%08lX, r7=%08lX, r8=%08lX\n", @@ -169,7 +169,7 @@ int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) regs.r6 = (unsigned long)arg; local_save_flags(regs.msr); regs.pc = (unsigned long)kernel_thread_helper; - regs.kernel_mode = 1; + regs.pt_mode = 1; ret = do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); -- cgit v1.2.2 From 2eba318e0db1114726e69660d6b9e1bd59b10ba1 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 11:05:26 +0200 Subject: microblaze: Move task_pt_regs up This change is important for easier merge with Microblaze MMU code. Signed-off-by: Michal Simek --- arch/microblaze/include/asm/processor.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h index 4bed76d0a6c4..cea42a36d161 100644 --- a/arch/microblaze/include/asm/processor.h +++ b/arch/microblaze/include/asm/processor.h @@ -26,6 +26,9 @@ extern const struct seq_operations cpuinfo_op; # endif /* __ASSEMBLY__ */ +#define task_pt_regs(tsk) \ + (((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1) + /* * User space process size: memory size * @@ -84,9 +87,6 @@ extern unsigned long get_wchan(struct task_struct *p); */ extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); -# define task_pt_regs(tsk) \ - (((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1) - # define KSTK_EIP(tsk) (0) # define KSTK_ESP(tsk) (0) -- cgit v1.2.2 From bf7e9da4e70a9d4bf9dc5829ff854398e0e4b7f7 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 11:10:07 +0200 Subject: microblaze: Remove sparse error in traps.c CHECK arch/microblaze/kernel/traps.c arch/microblaze/kernel/traps.c:37:47: warning: Using plain integer as NULL pointer CC arch/microblaze/kernel/traps.o Signed-off-by: Michal Simek --- arch/microblaze/kernel/traps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/traps.c b/arch/microblaze/kernel/traps.c index fbdc533c61e3..293ef486013a 100644 --- a/arch/microblaze/kernel/traps.c +++ b/arch/microblaze/kernel/traps.c @@ -34,7 +34,7 @@ static int kstack_depth_to_print = 24; static int __init kstack_setup(char *s) { - kstack_depth_to_print = strict_strtoul(s, 0, 0); + kstack_depth_to_print = strict_strtoul(s, 0, NULL); return 1; } -- cgit v1.2.2 From ce0b755f7dda4f1c06b89f7e903667f538dadd3c Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 11:11:22 +0200 Subject: microblaze: Add missing declaration for die and _exception func This change remove sparse errors. Signed-off-by: Michal Simek --- arch/microblaze/include/asm/exceptions.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/microblaze/include/asm/exceptions.h b/arch/microblaze/include/asm/exceptions.h index 4cdd2159f470..24ca540e77c0 100644 --- a/arch/microblaze/include/asm/exceptions.h +++ b/arch/microblaze/include/asm/exceptions.h @@ -61,6 +61,9 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, int fsr, int addr); +void die(const char *str, struct pt_regs *fp, long err); +void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr); + #if defined(CONFIG_XMON) extern void xmon(struct pt_regs *regs); extern int xmon_bpt(struct pt_regs *regs); -- cgit v1.2.2 From df4f3eb7c318e34899e9499bc5c9295690f7a106 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 11:29:13 +0200 Subject: microblaze: Add missing preadv and pwritev syscalls Signed-off-by: Michal Simek --- arch/microblaze/include/asm/unistd.h | 4 +++- arch/microblaze/kernel/syscall_table.S | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h index d9d3903fde3f..b5e2f5fa5c53 100644 --- a/arch/microblaze/include/asm/unistd.h +++ b/arch/microblaze/include/asm/unistd.h @@ -378,8 +378,10 @@ #define __NR_sendmsg 360 /* new */ #define __NR_recvmsg 361 /* new */ #define __NR_accept04 362 /* new */ +#define __NR_preadv 363 /* new */ +#define __NR_pwritev 364 /* new */ -#define __NR_syscalls 363 +#define __NR_syscalls 365 #ifdef __KERNEL__ #ifndef __ASSEMBLY__ diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S index 529b0dbf4fe9..3bb42ec924c2 100644 --- a/arch/microblaze/kernel/syscall_table.S +++ b/arch/microblaze/kernel/syscall_table.S @@ -363,3 +363,5 @@ ENTRY(sys_call_table) .long sys_sendmsg /* 360 */ .long sys_recvmsg .long sys_ni_syscall + .long sys_ni_syscall + .long sys_ni_syscall -- cgit v1.2.2 From e1c4bd0897b6d03eff4b32197d6ab017f83fc836 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 11:30:16 +0200 Subject: microblaze: Move start_thread to process.c This change is due to upcomming MMU merge Signed-off-by: Michal Simek --- arch/microblaze/include/asm/processor.h | 13 +++---------- arch/microblaze/kernel/process.c | 9 +++++++++ 2 files changed, 12 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h index cea42a36d161..89aa3956929b 100644 --- a/arch/microblaze/include/asm/processor.h +++ b/arch/microblaze/include/asm/processor.h @@ -29,6 +29,9 @@ extern const struct seq_operations cpuinfo_op; #define task_pt_regs(tsk) \ (((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1) +/* Do necessary setup to start up a newly executed thread. */ +void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp); + /* * User space process size: memory size * @@ -58,16 +61,6 @@ struct task_struct; struct thread_struct { }; # define INIT_THREAD { } -/* Do necessary setup to start up a newly executed thread. */ -static inline void start_thread(struct pt_regs *regs, - unsigned long pc, - unsigned long usp) -{ - regs->pc = pc; - regs->r1 = usp; - regs->pt_mode = 0; -} - /* Free all resources held by a thread. */ static inline void release_thread(struct task_struct *dead_task) { diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c index 40cc1480810e..dd15de9cde39 100644 --- a/arch/microblaze/kernel/process.c +++ b/arch/microblaze/kernel/process.c @@ -182,3 +182,12 @@ unsigned long get_wchan(struct task_struct *p) /* TBD (used by procfs) */ return 0; } + +/* Set up a thread for executing a new program */ +void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp) +{ + set_fs(USER_DS); + regs->pc = pc; + regs->r1 = usp; + regs->pt_mode = 0; +} -- cgit v1.2.2 From 6714fcc34e1bcf247fe542ebdea36b699ff8e2b8 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 11:32:21 +0200 Subject: microblaze: Remove redundant variable Signed-off-by: Michal Simek --- arch/microblaze/kernel/process.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c index dd15de9cde39..07d4fa339eda 100644 --- a/arch/microblaze/kernel/process.c +++ b/arch/microblaze/kernel/process.c @@ -161,7 +161,6 @@ static void kernel_thread_helper(int (*fn)(void *), void *arg) int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) { struct pt_regs regs; - int ret; memset(®s, 0, sizeof(regs)); /* store them in non-volatile registers */ @@ -171,10 +170,8 @@ int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) regs.pc = (unsigned long)kernel_thread_helper; regs.pt_mode = 1; - ret = do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, + return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); - - return ret; } unsigned long get_wchan(struct task_struct *p) -- cgit v1.2.2 From 04e3a553e0cbed369e5649c472ac317b6c45215d Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 20 Apr 2009 09:56:24 +0200 Subject: microblaze: Correspond CONFIG...PCMP in Makefile/Kconfig Makefile contained different cpu config flag than is in Kconfig.auto in platform folder Signed-off-by: Michal Simek --- arch/microblaze/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile index 0dcbb9832974..ee302f9f588d 100644 --- a/arch/microblaze/Makefile +++ b/arch/microblaze/Makefile @@ -26,7 +26,7 @@ ifeq (,$(findstring spartan2,$(CONFIG_XILINX_MICROBLAZE0_FAMILY))) endif CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_DIV) += -mno-xl-soft-div CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_BARREL) += -mxl-barrel-shift -CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP) += -mxl-pattern-compare +CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER)) -- cgit v1.2.2 From 6e60c14810d8da792e418fdcb2110b4185d1b9a2 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 16 Apr 2009 22:49:17 +0200 Subject: microblaze: iowrite upon timeout retries reaches -1, so the iowrite occurrs upon timeout. Acked-by: John Williams Signed-off-by: Roel Kluin Signed-off-by: Michal Simek --- arch/microblaze/kernel/early_printk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/early_printk.c b/arch/microblaze/kernel/early_printk.c index 62cc78993f44..4b0f0fdb9ca0 100644 --- a/arch/microblaze/kernel/early_printk.c +++ b/arch/microblaze/kernel/early_printk.c @@ -36,7 +36,7 @@ static void early_printk_putc(char c) unsigned retries = 10000; /* read status bit - 0x8 offset */ - while (retries-- && (in_be32(base_addr + 8) & (1 << 3))) + while (--retries && (in_be32(base_addr + 8) & (1 << 3))) ; /* Only attempt the iowrite if we didn't timeout */ -- cgit v1.2.2 From 79533fd4cb7c261694d3b7d5bdde78836bc35b49 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 21 Apr 2009 14:04:39 +0200 Subject: microblaze: Fix USR1/2 pvr printing message Signed-off-by: Michal Simek --- arch/microblaze/kernel/cpu/mb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/cpu/mb.c b/arch/microblaze/kernel/cpu/mb.c index 3b6212bdc8dc..4dcfccdbc364 100644 --- a/arch/microblaze/kernel/cpu/mb.c +++ b/arch/microblaze/kernel/cpu/mb.c @@ -115,8 +115,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) cpuinfo.hw_debug ? "yes" : "no"); count += seq_printf(m, - "PVR-USR1:\t%x\n" - "PVR-USR2:\t%x\n", + "PVR-USR1:\t%02x\n" + "PVR-USR2:\t%08x\n", cpuinfo.pvr_user1, cpuinfo.pvr_user2); -- cgit v1.2.2 From fbeda67782689bf80109512b16ac47264a282d01 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 21 Apr 2009 14:06:08 +0200 Subject: microblaze: Do not use PVR configuration for broken MB version Signed-off-by: Michal Simek --- arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c | 9 +++++++-- arch/microblaze/kernel/cpu/cpuinfo.c | 2 +- 2 files changed, 8 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c index cf7424a6bb87..153f57c57b6d 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c +++ b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c @@ -30,6 +30,13 @@ void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu) int temp; /* for saving temp value */ get_pvr(&pvr); + CI(ver_code, VERSION); + if (!ci->ver_code) { + printk(KERN_ERR "ERROR: MB has broken PVR regs " + "-> use DTS setting\n"); + return; + } + temp = PVR_USE_BARREL(pvr) | PVR_USE_MSR_INSTR(pvr) |\ PVR_USE_PCMP_INSTR(pvr) | PVR_USE_DIV(pvr); if (ci->use_instr != temp) @@ -60,8 +67,6 @@ void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu) CI(mmu, USE_MMU); - CI(ver_code, VERSION); - CI(use_icache, USE_ICACHE); CI(icache_tagbits, ICACHE_ADDR_TAG_BITS); CI(icache_write, ICACHE_ALLOW_WR); diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c index 4a740dfcf6da..a10bea119b94 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo.c +++ b/arch/microblaze/kernel/cpu/cpuinfo.c @@ -71,7 +71,7 @@ void __init setup_cpuinfo(void) __func__); set_cpuinfo_static(&cpuinfo, cpu); break; -/* FIXME I found weird behavior with MB 7.00.a/b +/* FIXME I found weird behavior with MB 7.00.a/b 7.10.a * please do not use FULL PVR with MMU */ case 1: printk(KERN_INFO "%s: Using full CPU PVR support\n", -- cgit v1.2.2 From 6dfb79aa114ac69032f3931235ffc90799e9630b Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 21 Apr 2009 14:07:00 +0200 Subject: microblaze: Do not check use_dcache It is not necessary to check cpuinfo.use_dcache because this checking is done in function which call that functions Signed-off-by: Michal Simek --- arch/microblaze/kernel/cpu/cache.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c index be9fecca4f91..af866a450125 100644 --- a/arch/microblaze/kernel/cpu/cache.c +++ b/arch/microblaze/kernel/cpu/cache.c @@ -100,7 +100,6 @@ void _enable_dcache(void) void _disable_dcache(void) { - if (cpuinfo.use_dcache) { #if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR __asm__ __volatile__ (" \ msrclr r0, %0; \ @@ -119,12 +118,10 @@ void _disable_dcache(void) : "i" (MSR_DCE) \ : "memory", "r12"); #endif - } } void _invalidate_dcache(unsigned int addr) { - if (cpuinfo.use_dcache) __asm__ __volatile__ (" \ wdc %0, r0" \ : \ -- cgit v1.2.2 From 2921e2bd679949a7892d308b414e6a3b3c705260 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 21 Apr 2009 14:08:47 +0200 Subject: microblaze: Add STATE_SAVE_ARG_SPACE for noMMU kernel too For noMMU kernel this change nothing bring but this change helps with MMU synchronization. Signed-off-by: Michal Simek --- arch/microblaze/include/asm/entry.h | 3 +++ arch/microblaze/include/asm/processor.h | 2 ++ arch/microblaze/kernel/signal.c | 14 ++++++++++---- 3 files changed, 15 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/include/asm/entry.h b/arch/microblaze/include/asm/entry.h index 1019d88b8129..e4c3aef884df 100644 --- a/arch/microblaze/include/asm/entry.h +++ b/arch/microblaze/include/asm/entry.h @@ -31,4 +31,7 @@ DECLARE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */ DECLARE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */ # endif /* __ASSEMBLY__ */ +/* noMMU hasn't any space for args */ +# define STATE_SAVE_ARG_SPACE (0) + #endif /* _ASM_MICROBLAZE_ENTRY_H */ diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h index 89aa3956929b..9329029d2614 100644 --- a/arch/microblaze/include/asm/processor.h +++ b/arch/microblaze/include/asm/processor.h @@ -15,6 +15,8 @@ #include #include #include +#include +#include # ifndef __ASSEMBLY__ /* from kernel/cpu/mb.c */ diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c index 3889cf45fa71..40d36931e363 100644 --- a/arch/microblaze/kernel/signal.c +++ b/arch/microblaze/kernel/signal.c @@ -178,7 +178,9 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc, int *rval_p) asmlinkage int sys_sigreturn(struct pt_regs *regs) { - struct sigframe *frame = (struct sigframe *)regs->r1; + struct sigframe *frame = + (struct sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE); + sigset_t set; int rval; @@ -209,7 +211,9 @@ badframe: asmlinkage int sys_rt_sigreturn(struct pt_regs *regs) { - struct rt_sigframe *frame = (struct rt_sigframe *)regs->r1; + struct rt_sigframe *frame = + (struct rt_sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE); + sigset_t set; stack_t st; int rval; @@ -336,7 +340,8 @@ static void setup_frame(int sig, struct k_sigaction *ka, goto give_sigsegv; /* Set up registers for signal handler */ - regs->r1 = (unsigned long) frame; + regs->r1 = (unsigned long) frame - STATE_SAVE_ARG_SPACE; + /* Signal handler args: */ regs->r5 = signal; /* Arg 0: signum */ regs->r6 = (unsigned long) &frame->sc; /* arg 1: sigcontext */ @@ -414,7 +419,8 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, goto give_sigsegv; /* Set up registers for signal handler */ - regs->r1 = (unsigned long) frame; + regs->r1 = (unsigned long) frame - STATE_SAVE_ARG_SPACE; + /* Signal handler args: */ regs->r5 = signal; /* arg 0: signum */ regs->r6 = (unsigned long) &frame->info; /* arg 1: siginfo */ -- cgit v1.2.2 From 993ce24078eac1442078741cd204584b63de0881 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 21 Apr 2009 14:12:18 +0200 Subject: microblaze: Use CFLAGS_KERNEL instead of CFLAGS Signed-off-by: Michal Simek --- arch/microblaze/Makefile | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile index ee302f9f588d..aaadfa701da3 100644 --- a/arch/microblaze/Makefile +++ b/arch/microblaze/Makefile @@ -32,15 +32,13 @@ CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER)) # The various CONFIG_XILINX cpu features options are integers 0/1/2... # rather than bools y/n -CFLAGS += $(CPUFLAGS-1) -CFLAGS += $(CPUFLAGS-2) # r31 holds current when in kernel mode -CFLAGS += -ffixed-r31 +CFLAGS_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2) LDFLAGS_BLOB := --format binary --oformat elf32-microblaze -LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name) +LIBGCC := $(shell $(CC) $(CFLAGS_KERNEL) -print-libgcc-file-name) head-y := arch/microblaze/kernel/head.o libs-y += arch/microblaze/lib/ $(LIBGCC) -- cgit v1.2.2 From f57f2fe2a39338c47b67fbd564a9d3b7587bcbee Mon Sep 17 00:00:00 2001 From: Coly Li Date: Thu, 23 Apr 2009 03:05:31 +0800 Subject: microblaze: add parameter to microblaze_read() This patch modifies parameter of microblaze_read() from 'void' to 'struct clocksource *cs', which fixes compile warning for incompatible parameter type. Signed-off-by: Coly Li Cc: Michal Simek Cc: Ingo Molnar Signed-off-by: Michal Simek --- arch/microblaze/kernel/timer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c index 05a497eefd78..bdfa2f9f0c81 100644 --- a/arch/microblaze/kernel/timer.c +++ b/arch/microblaze/kernel/timer.c @@ -176,7 +176,7 @@ static __init void microblaze_clockevent_init(void) clockevents_register_device(&clockevent_microblaze_timer); } -static cycle_t microblaze_read(void) +static cycle_t microblaze_read(struct clocksource *cs) { /* reading actual value of timer 1 */ return (cycle_t) (in_be32(TIMER_BASE + TCR1)); -- cgit v1.2.2 From 9232fcc99948e39d5be04fc1c1025bd4f7998739 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 8 Apr 2009 14:49:38 -0700 Subject: davinci: add default Kconfig, add HAVE_IDE Signed-off-by: Kevin Hilman --- arch/arm/Kconfig | 1 + arch/arm/configs/davinci_all_defconfig | 1784 ++++++++++++++++++++++++++++++++ 2 files changed, 1785 insertions(+) create mode 100644 arch/arm/configs/davinci_all_defconfig (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e02b893fb909..bb57f35e7683 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -585,6 +585,7 @@ config ARCH_DAVINCI select ARCH_REQUIRE_GPIOLIB select HAVE_CLK select ZONE_DMA + select HAVE_IDE help Support for TI's DaVinci platform. diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig new file mode 100644 index 000000000000..eb2738b5be5f --- /dev/null +++ b/arch/arm/configs/davinci_all_defconfig @@ -0,0 +1,1784 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc2 +# Wed Apr 15 08:16:53 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +CONFIG_ARCH_DAVINCI=y +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# TI DaVinci Implementations +# + +# +# DaVinci Core Type +# +CONFIG_ARCH_DAVINCI_DM644x=y + +# +# DaVinci Board Type +# +CONFIG_MACH_DAVINCI_EVM=y +CONFIG_DAVINCI_MUX=y +CONFIG_DAVINCI_MUX_DEBUG=y +CONFIG_DAVINCI_MUX_WARNINGS=y +CONFIG_DAVINCI_RESET_CLOCKS=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_LEDS=y +# CONFIG_LEDS_CPU is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_NF_DEFRAG_IPV4 is not set +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=m +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=m +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=m +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=m +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=m +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=m +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=m +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=m +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +CONFIG_MTD_NAND_DAVINCI=m +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=1 +CONFIG_BLK_DEV_RAM_SIZE=32768 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +CONFIG_IDE=m + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +CONFIG_IDE_XFER_MODE=y +CONFIG_IDE_TIMINGS=y +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=m +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y +CONFIG_BLK_DEV_PALMCHIP_BK3710=m +CONFIG_BLK_DEV_IDEDMA=y + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +CONFIG_LXT_PHY=y +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +CONFIG_LSI_ET1011C_PHY=y +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set +CONFIG_NETPOLL=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=m +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=m +CONFIG_INPUT_EVBUG=m + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=m +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_XTKBD=m +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +# CONFIG_VT_CONSOLE is not set +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=3 +CONFIG_SERIAL_8250_RUNTIME_UARTS=3 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_DAVINCI=y +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +CONFIG_GPIO_PCF857X=m + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_DAVINCI_WATCHDOG=m + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_MEDIA_TUNER_MC44S803=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_V4L_USB_DRIVERS is not set +# CONFIG_RADIO_ADAPTERS is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=m +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_JACK=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_ARM=y +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set +CONFIG_SND_SOC=m +# CONFIG_SND_DAVINCI_SOC is not set +CONFIG_SND_SOC_I2C_AND_SPI=m +# CONFIG_SND_SOC_ALL_CODECS is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=m +CONFIG_HID_APPLE=m +CONFIG_HID_BELKIN=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_CYPRESS=m +# CONFIG_DRAGONRISE_FF is not set +CONFIG_HID_EZKEY=m +# CONFIG_HID_KYE is not set +CONFIG_HID_GYRATION=m +# CONFIG_HID_KENSINGTON is not set +CONFIG_HID_LOGITECH=m +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +# CONFIG_HID_NTRIG is not set +CONFIG_HID_PANTHERLORD=m +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_HID_SUNPLUS=m +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=m +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=m +CONFIG_USB_MUSB_SOC=y + +# +# DaVinci 35x and 644x USB support +# +# CONFIG_USB_MUSB_HOST is not set +CONFIG_USB_MUSB_PERIPHERAL=y +# CONFIG_USB_MUSB_OTG is not set +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_MUSB_PIO_ONLY=y +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=m +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG is not set +CONFIG_USB_GADGET_DEBUG_FILES=y +CONFIG_USB_GADGET_DEBUG_FS=y +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_USB_G_PRINTER=m +CONFIG_USB_CDC_COMPOSITE=m + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=m +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=m +# CONFIG_MMC_BLOCK_BOUNCE is not set +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=m +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +# CONFIG_LEDS_TRIGGER_IDE_DISK is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=m + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=m +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_PI_LIST=y +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=m +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.2 From e653034e66ec406f37427f588115badc6fc6af64 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 20 Mar 2009 17:37:21 -0700 Subject: davinci: add runtime CPU detection support Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/id.c | 29 ++++++++++++++-- arch/arm/mach-davinci/include/mach/cputype.h | 49 ++++++++++++++++++++++++++++ 2 files changed, 75 insertions(+), 3 deletions(-) create mode 100644 arch/arm/mach-davinci/include/mach/cputype.h (limited to 'arch') diff --git a/arch/arm/mach-davinci/id.c b/arch/arm/mach-davinci/id.c index bf067d604918..379f2baf66d6 100644 --- a/arch/arm/mach-davinci/id.c +++ b/arch/arm/mach-davinci/id.c @@ -17,6 +17,8 @@ #define JTAG_ID_BASE 0x01c40028 +static unsigned int davinci_revision; + struct davinci_id { u8 variant; /* JTAG ID bits 31:28 */ u16 part_no; /* JTAG ID bits 27:12 */ @@ -33,6 +35,20 @@ static struct davinci_id davinci_ids[] __initdata = { .manufacturer = 0x017, .type = 0x64460000, }, + { + /* DM646X */ + .part_no = 0xb770, + .variant = 0x0, + .manufacturer = 0x017, + .type = 0x64670000, + }, + { + /* DM355 */ + .part_no = 0xb73b, + .variant = 0x0, + .manufacturer = 0x00f, + .type = 0x03550000, + }, }; /* @@ -63,6 +79,12 @@ static u8 __init davinci_get_variant(void) return variant; } +unsigned int davinci_rev(void) +{ + return davinci_revision >> 16; +} +EXPORT_SYMBOL(davinci_rev); + void __init davinci_check_revision(void) { int i; @@ -75,7 +97,7 @@ void __init davinci_check_revision(void) /* First check only the major version in a safe way */ for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) { if (part_no == (davinci_ids[i].part_no)) { - system_rev = davinci_ids[i].type; + davinci_revision = davinci_ids[i].type; break; } } @@ -84,10 +106,11 @@ void __init davinci_check_revision(void) for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) { if (part_no == davinci_ids[i].part_no && variant == davinci_ids[i].variant) { - system_rev = davinci_ids[i].type; + davinci_revision = davinci_ids[i].type; break; } } - printk("DaVinci DM%04x variant 0x%x\n", system_rev >> 16, variant); + printk(KERN_INFO "DaVinci DM%04x variant 0x%x\n", + davinci_rev(), variant); } diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h new file mode 100644 index 000000000000..27cfb1b3a662 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/cputype.h @@ -0,0 +1,49 @@ +/* + * DaVinci CPU type detection + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * Defines the cpu_is_*() macros for runtime detection of DaVinci + * device type. In addtion, if support for a given device is not + * compiled in to the kernel, the macros return 0 so that + * resulting code can be optimized out. + * + * 2009 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef _ASM_ARCH_CPU_H +#define _ASM_ARCH_CPU_H + +extern unsigned int davinci_rev(void); + +#define IS_DAVINCI_CPU(type, id) \ +static inline int is_davinci_dm ##type(void) \ +{ \ + return (davinci_rev() == (id)) ? 1 : 0; \ +} + +IS_DAVINCI_CPU(644x, 0x6446) +IS_DAVINCI_CPU(646x, 0x6467) +IS_DAVINCI_CPU(355, 0x355) + +#ifdef CONFIG_ARCH_DAVINCI_DM644x +#define cpu_is_davinci_dm644x() is_davinci_dm644x() +#else +#define cpu_is_davinci_dm644x() 0 +#endif + +#ifdef CONFIG_ARCH_DAVINCI_DM646x +#define cpu_is_davinci_dm646x() is_davinci_dm646x() +#else +#define cpu_is_davinci_dm646x() 0 +#endif + +#ifdef CONFIG_ARCH_DAVINCI_DM355 +#define cpu_is_davinci_dm355() is_davinci_dm355() +#else +#define cpu_is_davinci_dm355() 0 +#endif + +#endif -- cgit v1.2.2 From c5b736d093217890245a33e9a98fe92d6f3529bf Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 20 Mar 2009 17:29:01 -0700 Subject: davinci: major rework of clock, PLL, PSC infrastructure This is a significant rework of the low-level clock, PLL and Power Sleep Controller (PSC) implementation for the DaVinci family. The primary goal is to have better modeling if the hardware clocks and features with the aim of DVFS functionality. Highlights: - model PLLs and all PLL-derived clocks - model parent/child relationships of PLLs and clocks - convert to new clkdev layer - view clock frequency and refcount via /proc/davinci_clocks Special thanks to significant contributions and testing by David Brownell. Cc: David Brownell Signed-off-by: Kevin Hilman --- arch/arm/Kconfig | 1 + arch/arm/mach-davinci/Kconfig | 12 + arch/arm/mach-davinci/board-evm.c | 2 - arch/arm/mach-davinci/clock.c | 385 ++++++++++++++++------------ arch/arm/mach-davinci/clock.h | 87 ++++++- arch/arm/mach-davinci/include/mach/clkdev.h | 13 + arch/arm/mach-davinci/include/mach/clock.h | 1 - arch/arm/mach-davinci/include/mach/psc.h | 53 +++- arch/arm/mach-davinci/io.c | 1 - arch/arm/mach-davinci/psc.c | 81 ++---- 10 files changed, 402 insertions(+), 234 deletions(-) create mode 100644 arch/arm/mach-davinci/include/mach/clkdev.h (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index bb57f35e7683..cfd99649ad85 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -586,6 +586,7 @@ config ARCH_DAVINCI select HAVE_CLK select ZONE_DMA select HAVE_IDE + select COMMON_CLKDEV help Support for TI's DaVinci platform. diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index bac988e7a4c3..af886734c73b 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -18,6 +18,18 @@ config MACH_DAVINCI_EVM Configure this option to specify the whether the board used for development is a DaVinci EVM +config DAVINCI_RESET_CLOCKS + bool "Reset unused clocks during boot" + depends on ARCH_DAVINCI + help + Say Y if you want to reset unused clocks during boot. + This option saves power, but assumes all drivers are + using the clock framework. Broken drivers that do not + yet use clock framework may not work with this option. + If you are booting from another operating system, you + probably do not want this option enabled until your + device drivers work properly. + endmenu endif diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c index 0b97a528902b..1b745c39d891 100644 --- a/arch/arm/mach-davinci/board-evm.c +++ b/arch/arm/mach-davinci/board-evm.c @@ -406,8 +406,6 @@ davinci_evm_map_io(void) static __init void davinci_evm_init(void) { - davinci_psc_init(); - #if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) #if defined(CONFIG_MTD_PHYSMAP) || \ diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index abb92b7eca0c..f0baaa15a57e 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -1,7 +1,8 @@ /* - * TI DaVinci clock config file + * Clock and PLL control for DaVinci devices * - * Copyright (C) 2006 Texas Instruments. + * Copyright (C) 2006-2007 Texas Instruments. + * Copyright (C) 2008-2009 Deep Root Systems, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -13,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -21,98 +23,50 @@ #include #include +#include #include "clock.h" -/* PLL/Reset register offsets */ -#define PLLM 0x110 - static LIST_HEAD(clocks); static DEFINE_MUTEX(clocks_mutex); static DEFINE_SPINLOCK(clockfw_lock); -static unsigned int commonrate; -static unsigned int armrate; -static unsigned int fixedrate = 27000000; /* 27 MHZ */ - -extern void davinci_psc_config(unsigned int domain, unsigned int id, char enable); - -/* - * Returns a clock. Note that we first try to use device id on the bus - * and clock name. If this fails, we try to use clock name only. - */ -struct clk *clk_get(struct device *dev, const char *id) +static unsigned psc_domain(struct clk *clk) { - struct clk *p, *clk = ERR_PTR(-ENOENT); - int idno; - - if (dev == NULL || dev->bus != &platform_bus_type) - idno = -1; - else - idno = to_platform_device(dev)->id; - - mutex_lock(&clocks_mutex); - - list_for_each_entry(p, &clocks, node) { - if (p->id == idno && - strcmp(id, p->name) == 0 && try_module_get(p->owner)) { - clk = p; - goto found; - } - } - - list_for_each_entry(p, &clocks, node) { - if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { - clk = p; - break; - } - } - -found: - mutex_unlock(&clocks_mutex); - - return clk; + return (clk->flags & PSC_DSP) + ? DAVINCI_GPSC_DSPDOMAIN + : DAVINCI_GPSC_ARMDOMAIN; } -EXPORT_SYMBOL(clk_get); -void clk_put(struct clk *clk) +static void __clk_enable(struct clk *clk) { - if (clk && !IS_ERR(clk)) - module_put(clk->owner); -} -EXPORT_SYMBOL(clk_put); - -static int __clk_enable(struct clk *clk) -{ - if (clk->flags & ALWAYS_ENABLED) - return 0; - - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 1); - return 0; + if (clk->parent) + __clk_enable(clk->parent); + if (clk->usecount++ == 0 && (clk->flags & CLK_PSC)) + davinci_psc_config(psc_domain(clk), clk->lpsc, 1); } static void __clk_disable(struct clk *clk) { - if (clk->usecount) + if (WARN_ON(clk->usecount == 0)) return; - - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 0); + if (--clk->usecount == 0 && !(clk->flags & CLK_PLL)) + davinci_psc_config(psc_domain(clk), clk->lpsc, 0); + if (clk->parent) + __clk_disable(clk->parent); } int clk_enable(struct clk *clk) { unsigned long flags; - int ret = 0; if (clk == NULL || IS_ERR(clk)) return -EINVAL; - if (clk->usecount++ == 0) { - spin_lock_irqsave(&clockfw_lock, flags); - ret = __clk_enable(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - } + spin_lock_irqsave(&clockfw_lock, flags); + __clk_enable(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); - return ret; + return 0; } EXPORT_SYMBOL(clk_enable); @@ -123,11 +77,9 @@ void clk_disable(struct clk *clk) if (clk == NULL || IS_ERR(clk)) return; - if (clk->usecount > 0 && !(--clk->usecount)) { - spin_lock_irqsave(&clockfw_lock, flags); - __clk_disable(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - } + spin_lock_irqsave(&clockfw_lock, flags); + __clk_disable(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); } EXPORT_SYMBOL(clk_disable); @@ -136,7 +88,7 @@ unsigned long clk_get_rate(struct clk *clk) if (clk == NULL || IS_ERR(clk)) return -EINVAL; - return *(clk->rate); + return clk->rate; } EXPORT_SYMBOL(clk_get_rate); @@ -145,7 +97,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate) if (clk == NULL || IS_ERR(clk)) return -EINVAL; - return *(clk->rate); + return clk->rate; } EXPORT_SYMBOL(clk_round_rate); @@ -164,10 +116,23 @@ int clk_register(struct clk *clk) if (clk == NULL || IS_ERR(clk)) return -EINVAL; + if (WARN(clk->parent && !clk->parent->rate, + "CLK: %s parent %s has no rate!\n", + clk->name, clk->parent->name)) + return -EINVAL; + mutex_lock(&clocks_mutex); - list_add(&clk->node, &clocks); + list_add_tail(&clk->node, &clocks); mutex_unlock(&clocks_mutex); + /* If rate is already set, use it */ + if (clk->rate) + return 0; + + /* Otherwise, default to parent rate */ + if (clk->parent) + clk->rate = clk->parent->rate; + return 0; } EXPORT_SYMBOL(clk_register); @@ -183,84 +148,150 @@ void clk_unregister(struct clk *clk) } EXPORT_SYMBOL(clk_unregister); -static struct clk davinci_clks[] = { - { - .name = "ARMCLK", - .rate = &armrate, - .lpsc = -1, - .flags = ALWAYS_ENABLED, - }, - { - .name = "UART", - .rate = &fixedrate, - .lpsc = DAVINCI_LPSC_UART0, - }, - { - .name = "EMACCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_EMAC_WRAPPER, - }, - { - .name = "I2CCLK", - .rate = &fixedrate, - .lpsc = DAVINCI_LPSC_I2C, - }, - { - .name = "IDECLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_ATA, - }, - { - .name = "McBSPCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_McBSP, - }, - { - .name = "MMCSDCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_MMC_SD, - }, - { - .name = "SPICLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_SPI, - }, - { - .name = "gpio", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_GPIO, - }, - { - .name = "usb", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_USB, - }, - { - .name = "AEMIFCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_AEMIF, - .usecount = 1, +#ifdef CONFIG_DAVINCI_RESET_CLOCKS +/* + * Disable any unused clocks left on by the bootloader + */ +static int __init clk_disable_unused(void) +{ + struct clk *ck; + + spin_lock_irq(&clockfw_lock); + list_for_each_entry(ck, &clocks, node) { + if (ck->usecount > 0) + continue; + if (!(ck->flags & CLK_PSC)) + continue; + + /* ignore if in Disabled or SwRstDisable states */ + if (!davinci_psc_is_clk_active(ck->lpsc)) + continue; + + pr_info("Clocks: disable unused %s\n", ck->name); + davinci_psc_config(psc_domain(ck), ck->lpsc, 0); } -}; + spin_unlock_irq(&clockfw_lock); + + return 0; +} +late_initcall(clk_disable_unused); +#endif -int __init davinci_clk_init(void) +static void clk_sysclk_recalc(struct clk *clk) { - struct clk *clkp; - int count = 0; - u32 pll_mult; - - pll_mult = davinci_readl(DAVINCI_PLL_CNTRL0_BASE + PLLM); - commonrate = ((pll_mult + 1) * 27000000) / 6; - armrate = ((pll_mult + 1) * 27000000) / 2; - - for (clkp = davinci_clks; count < ARRAY_SIZE(davinci_clks); - count++, clkp++) { - clk_register(clkp); - - /* Turn on clocks that have been enabled in the - * table above */ - if (clkp->usecount) - clk_enable(clkp); + u32 v, plldiv; + struct pll_data *pll; + + /* If this is the PLL base clock, no more calculations needed */ + if (clk->pll_data) + return; + + if (WARN_ON(!clk->parent)) + return; + + clk->rate = clk->parent->rate; + + /* Otherwise, the parent must be a PLL */ + if (WARN_ON(!clk->parent->pll_data)) + return; + + pll = clk->parent->pll_data; + + /* If pre-PLL, source clock is before the multiplier and divider(s) */ + if (clk->flags & PRE_PLL) + clk->rate = pll->input_rate; + + if (!clk->div_reg) + return; + + v = __raw_readl(pll->base + clk->div_reg); + if (v & PLLDIV_EN) { + plldiv = (v & PLLDIV_RATIO_MASK) + 1; + if (plldiv) + clk->rate /= plldiv; + } +} + +static void __init clk_pll_init(struct clk *clk) +{ + u32 ctrl, mult = 1, prediv = 1, postdiv = 1; + u8 bypass; + struct pll_data *pll = clk->pll_data; + + pll->base = IO_ADDRESS(pll->phys_base); + ctrl = __raw_readl(pll->base + PLLCTL); + clk->rate = pll->input_rate = clk->parent->rate; + + if (ctrl & PLLCTL_PLLEN) { + bypass = 0; + mult = __raw_readl(pll->base + PLLM); + mult = (mult & PLLM_PLLM_MASK) + 1; + } else + bypass = 1; + + if (pll->flags & PLL_HAS_PREDIV) { + prediv = __raw_readl(pll->base + PREDIV); + if (prediv & PLLDIV_EN) + prediv = (prediv & PLLDIV_RATIO_MASK) + 1; + else + prediv = 1; + } + + /* pre-divider is fixed, but (some?) chips won't report that */ + if (cpu_is_davinci_dm355() && pll->num == 1) + prediv = 8; + + if (pll->flags & PLL_HAS_POSTDIV) { + postdiv = __raw_readl(pll->base + POSTDIV); + if (postdiv & PLLDIV_EN) + postdiv = (postdiv & PLLDIV_RATIO_MASK) + 1; + else + postdiv = 1; + } + + if (!bypass) { + clk->rate /= prediv; + clk->rate *= mult; + clk->rate /= postdiv; + } + + pr_debug("PLL%d: input = %lu MHz [ ", + pll->num, clk->parent->rate / 1000000); + if (bypass) + pr_debug("bypass "); + if (prediv > 1) + pr_debug("/ %d ", prediv); + if (mult > 1) + pr_debug("* %d ", mult); + if (postdiv > 1) + pr_debug("/ %d ", postdiv); + pr_debug("] --> %lu MHz output.\n", clk->rate / 1000000); +} + +int __init davinci_clk_init(struct davinci_clk *clocks) + { + struct davinci_clk *c; + struct clk *clk; + + for (c = clocks; c->lk.clk; c++) { + clk = c->lk.clk; + + if (clk->pll_data) + clk_pll_init(clk); + + /* Calculate rates for PLL-derived clocks */ + else if (clk->flags & CLK_PLL) + clk_sysclk_recalc(clk); + + if (clk->lpsc) + clk->flags |= CLK_PSC; + + clkdev_add(&c->lk); + clk_register(clk); + + /* Turn on clocks that Linux doesn't otherwise manage */ + if (clk->flags & ALWAYS_ENABLED) + clk_enable(clk); } return 0; @@ -285,12 +316,52 @@ static void davinci_ck_stop(struct seq_file *m, void *v) { } -static int davinci_ck_show(struct seq_file *m, void *v) +#define CLKNAME_MAX 10 /* longest clock name */ +#define NEST_DELTA 2 +#define NEST_MAX 4 + +static void +dump_clock(struct seq_file *s, unsigned nest, struct clk *parent) { - struct clk *cp; + char *state; + char buf[CLKNAME_MAX + NEST_DELTA * NEST_MAX]; + struct clk *clk; + unsigned i; + + if (parent->flags & CLK_PLL) + state = "pll"; + else if (parent->flags & CLK_PSC) + state = "psc"; + else + state = ""; + + /* name */ + memset(buf, ' ', sizeof(buf) - 1); + buf[sizeof(buf) - 1] = 0; + i = strlen(parent->name); + memcpy(buf + nest, parent->name, + min(i, (unsigned)(sizeof(buf) - 1 - nest))); + + seq_printf(s, "%s users=%2d %-3s %9ld Hz\n", + buf, parent->usecount, state, clk_get_rate(parent)); + /* REVISIT show device associations too */ + + /* cost is now small, but not linear... */ + list_for_each_entry(clk, &clocks, node) { + if (clk->parent == parent) + dump_clock(s, nest + NEST_DELTA, clk); + } +} - list_for_each_entry(cp, &clocks, node) - seq_printf(m,"%s %d %d\n", cp->name, *(cp->rate), cp->usecount); +static int davinci_ck_show(struct seq_file *m, void *v) +{ + /* Show clock tree; we know the main oscillator is first. + * We trust nonzero usecounts equate to PSC enables... + */ + mutex_lock(&clocks_mutex); + if (!list_empty(&clocks)) + dump_clock(m, 0, list_first_entry(&clocks, struct clk, node)); + mutex_unlock(&clocks_mutex); return 0; } @@ -321,4 +392,4 @@ static int __init davinci_ck_proc_init(void) } __initcall(davinci_ck_proc_init); -#endif /* CONFIG_DEBUG_PROC_FS */ +#endif /* CONFIG_DEBUG_PROC_FS */ diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index ed47079a52e4..35736ec202f8 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h @@ -1,7 +1,8 @@ /* * TI DaVinci clock definitions * - * Copyright (C) 2006 Texas Instruments. + * Copyright (C) 2006-2007 Texas Instruments. + * Copyright (C) 2008-2009 Deep Root Systems, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -11,23 +12,85 @@ #ifndef __ARCH_ARM_DAVINCI_CLOCK_H #define __ARCH_ARM_DAVINCI_CLOCK_H +#include +#include + +#define DAVINCI_PLL1_BASE 0x01c40800 +#define DAVINCI_PLL2_BASE 0x01c40c00 +#define MAX_PLL 2 + +/* PLL/Reset register offsets */ +#define PLLCTL 0x100 +#define PLLCTL_PLLEN BIT(0) +#define PLLCTL_CLKMODE BIT(8) + +#define PLLM 0x110 +#define PLLM_PLLM_MASK 0xff + +#define PREDIV 0x114 +#define PLLDIV1 0x118 +#define PLLDIV2 0x11c +#define PLLDIV3 0x120 +#define POSTDIV 0x128 +#define BPDIV 0x12c +#define PLLCMD 0x138 +#define PLLSTAT 0x13c +#define PLLALNCTL 0x140 +#define PLLDCHANGE 0x144 +#define PLLCKEN 0x148 +#define PLLCKSTAT 0x14c +#define PLLSYSTAT 0x150 +#define PLLDIV4 0x160 +#define PLLDIV5 0x164 +#define PLLDIV6 0x168 +#define PLLDIV7 0x16c +#define PLLDIV8 0x170 +#define PLLDIV9 0x174 +#define PLLDIV_EN BIT(15) +#define PLLDIV_RATIO_MASK 0x1f + +struct pll_data { + u32 phys_base; + void __iomem *base; + u32 num; + u32 flags; + u32 input_rate; +}; +#define PLL_HAS_PREDIV 0x01 +#define PLL_HAS_POSTDIV 0x02 + struct clk { struct list_head node; struct module *owner; const char *name; - unsigned int *rate; - int id; - __s8 usecount; - __u8 flags; - __u8 lpsc; + unsigned long rate; + u8 usecount; + u8 flags; + u8 lpsc; + struct clk *parent; + struct pll_data *pll_data; + u32 div_reg; }; /* Clock flags */ -#define RATE_CKCTL 1 -#define RATE_FIXED 2 -#define RATE_PROPAGATES 4 -#define VIRTUAL_CLOCK 8 -#define ALWAYS_ENABLED 16 -#define ENABLE_REG_32BIT 32 +#define ALWAYS_ENABLED BIT(1) +#define CLK_PSC BIT(2) +#define PSC_DSP BIT(3) /* PSC uses DSP domain, not ARM */ +#define CLK_PLL BIT(4) /* PLL-derived clock */ +#define PRE_PLL BIT(5) /* source is before PLL mult/div */ + +struct davinci_clk { + struct clk_lookup lk; +}; + +#define CLK(dev, con, ck) \ + { \ + .lk = { \ + .dev_id = dev, \ + .con_id = con, \ + .clk = ck, \ + }, \ + } +int davinci_clk_init(struct davinci_clk *clocks); #endif diff --git a/arch/arm/mach-davinci/include/mach/clkdev.h b/arch/arm/mach-davinci/include/mach/clkdev.h new file mode 100644 index 000000000000..730c49d1ebd8 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/clkdev.h @@ -0,0 +1,13 @@ +#ifndef __MACH_CLKDEV_H +#define __MACH_CLKDEV_H + +static inline int __clk_get(struct clk *clk) +{ + return 1; +} + +static inline void __clk_put(struct clk *clk) +{ +} + +#endif diff --git a/arch/arm/mach-davinci/include/mach/clock.h b/arch/arm/mach-davinci/include/mach/clock.h index 38bdd49bc181..a3b040219876 100644 --- a/arch/arm/mach-davinci/include/mach/clock.h +++ b/arch/arm/mach-davinci/include/mach/clock.h @@ -17,6 +17,5 @@ struct clk; extern int clk_register(struct clk *clk); extern void clk_unregister(struct clk *clk); -extern int davinci_clk_init(void); #endif diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 4977aa071e1e..55a90d419fac 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -38,8 +38,6 @@ #define DAVINCI_LPSC_TPTC1 4 #define DAVINCI_LPSC_EMAC 5 #define DAVINCI_LPSC_EMAC_WRAPPER 6 -#define DAVINCI_LPSC_MDIO 7 -#define DAVINCI_LPSC_IEEE1394 8 #define DAVINCI_LPSC_USB 9 #define DAVINCI_LPSC_ATA 10 #define DAVINCI_LPSC_VLYNQ 11 @@ -47,7 +45,6 @@ #define DAVINCI_LPSC_DDR_EMIF 13 #define DAVINCI_LPSC_AEMIF 14 #define DAVINCI_LPSC_MMC_SD 15 -#define DAVINCI_LPSC_MEMSTICK 16 #define DAVINCI_LPSC_McBSP 17 #define DAVINCI_LPSC_I2C 18 #define DAVINCI_LPSC_UART0 19 @@ -73,4 +70,54 @@ #define DAVINCI_LPSC_GEM 39 #define DAVINCI_LPSC_IMCOP 40 +#define DM355_LPSC_TIMER3 5 +#define DM355_LPSC_SPI1 6 +#define DM355_LPSC_MMC_SD1 7 +#define DM355_LPSC_McBSP1 8 +#define DM355_LPSC_PWM3 10 +#define DM355_LPSC_SPI2 11 +#define DM355_LPSC_RTO 12 +#define DM355_LPSC_VPSS_DAC 41 + +/* + * LPSC Assignments + */ +#define DM646X_LPSC_ARM 0 +#define DM646X_LPSC_C64X_CPU 1 +#define DM646X_LPSC_HDVICP0 2 +#define DM646X_LPSC_HDVICP1 3 +#define DM646X_LPSC_TPCC 4 +#define DM646X_LPSC_TPTC0 5 +#define DM646X_LPSC_TPTC1 6 +#define DM646X_LPSC_TPTC2 7 +#define DM646X_LPSC_TPTC3 8 +#define DM646X_LPSC_PCI 13 +#define DM646X_LPSC_EMAC 14 +#define DM646X_LPSC_VDCE 15 +#define DM646X_LPSC_VPSSMSTR 16 +#define DM646X_LPSC_VPSSSLV 17 +#define DM646X_LPSC_TSIF0 18 +#define DM646X_LPSC_TSIF1 19 +#define DM646X_LPSC_DDR_EMIF 20 +#define DM646X_LPSC_AEMIF 21 +#define DM646X_LPSC_McASP0 22 +#define DM646X_LPSC_McASP1 23 +#define DM646X_LPSC_CRGEN0 24 +#define DM646X_LPSC_CRGEN1 25 +#define DM646X_LPSC_UART0 26 +#define DM646X_LPSC_UART1 27 +#define DM646X_LPSC_UART2 28 +#define DM646X_LPSC_PWM0 29 +#define DM646X_LPSC_PWM1 30 +#define DM646X_LPSC_I2C 31 +#define DM646X_LPSC_SPI 32 +#define DM646X_LPSC_GPIO 33 +#define DM646X_LPSC_TIMER0 34 +#define DM646X_LPSC_TIMER1 35 +#define DM646X_LPSC_ARM_INTC 45 + +extern int davinci_psc_is_clk_active(unsigned int id); +extern void davinci_psc_config(unsigned int domain, unsigned int id, + char enable); + #endif /* __ASM_ARCH_PSC_H */ diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c index 299515f70b8b..71a7ae342b91 100644 --- a/arch/arm/mach-davinci/io.c +++ b/arch/arm/mach-davinci/io.c @@ -53,5 +53,4 @@ void __init davinci_map_common_io(void) void __init davinci_init_common_hw(void) { - davinci_clk_init(); } diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index 58754f066d5b..c5098831741f 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -23,6 +23,7 @@ #include #include +#include #include #include #include @@ -36,76 +37,57 @@ #define MDSTAT 0x800 #define MDCTL 0xA00 -/* System control register offsets */ -#define VDD3P3V_PWDN 0x48 -static void davinci_psc_mux(unsigned int id) +/* Return nonzero iff the domain's clock is active */ +int __init davinci_psc_is_clk_active(unsigned int id) { - switch (id) { - case DAVINCI_LPSC_ATA: - davinci_mux_peripheral(DAVINCI_MUX_HDIREN, 1); - davinci_mux_peripheral(DAVINCI_MUX_ATAEN, 1); - break; - case DAVINCI_LPSC_MMC_SD: - /* VDD power manupulations are done in U-Boot for CPMAC - * so applies to MMC as well - */ - /*Set up the pull regiter for MMC */ - davinci_writel(0, DAVINCI_SYSTEM_MODULE_BASE + VDD3P3V_PWDN); - davinci_mux_peripheral(DAVINCI_MUX_MSTK, 0); - break; - case DAVINCI_LPSC_I2C: - davinci_mux_peripheral(DAVINCI_MUX_I2C, 1); - break; - case DAVINCI_LPSC_McBSP: - davinci_mux_peripheral(DAVINCI_MUX_ASP, 1); - break; - default: - break; - } + void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE); + u32 mdstat = __raw_readl(psc_base + MDSTAT + 4 * id); + + /* if clocked, state can be "Enable" or "SyncReset" */ + return mdstat & BIT(12); } /* Enable or disable a PSC domain */ void davinci_psc_config(unsigned int domain, unsigned int id, char enable) { u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask; + void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE); - mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id); + mdctl = __raw_readl(psc_base + MDCTL + 4 * id); if (enable) mdctl |= 0x00000003; /* Enable Module */ else - mdctl &= 0xFFFFFFF2; /* Disable Module */ - davinci_writel(mdctl, DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id); + mdctl &= 0xFFFFFFE2; /* Disable Module */ + __raw_writel(mdctl, psc_base + MDCTL + 4 * id); - pdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDSTAT); + pdstat = __raw_readl(psc_base + PDSTAT); if ((pdstat & 0x00000001) == 0) { - pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + pdctl1 = __raw_readl(psc_base + PDCTL1); pdctl1 |= 0x1; - davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + __raw_writel(pdctl1, psc_base + PDCTL1); ptcmd = 1 << domain; - davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD); + __raw_writel(ptcmd, psc_base + PTCMD); do { - epcpr = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + - EPCPR); + epcpr = __raw_readl(psc_base + EPCPR); } while ((((epcpr >> domain) & 1) == 0)); - pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + pdctl1 = __raw_readl(psc_base + PDCTL1); pdctl1 |= 0x100; - davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + __raw_writel(pdctl1, psc_base + PDCTL1); do { - ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + + ptstat = __raw_readl(psc_base + PTSTAT); } while (!(((ptstat >> domain) & 1) == 0)); } else { ptcmd = 1 << domain; - davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD); + __raw_writel(ptcmd, psc_base + PTCMD); do { - ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + - PTSTAT); + ptstat = __raw_readl(psc_base + PTSTAT); } while (!(((ptstat >> domain) & 1) == 0)); } @@ -115,23 +97,6 @@ void davinci_psc_config(unsigned int domain, unsigned int id, char enable) mdstat_mask = 0x2; do { - mdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + - MDSTAT + 4 * id); + mdstat = __raw_readl(psc_base + MDSTAT + 4 * id); } while (!((mdstat & 0x0000001F) == mdstat_mask)); - - if (enable) - davinci_psc_mux(id); -} - -void __init davinci_psc_init(void) -{ - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSMSTR, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSSLV, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPCC, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC0, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC1, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_GPIO, 1); - - /* Turn on WatchDog timer LPSC. Needed for RESET to work */ - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TIMER2, 1); } -- cgit v1.2.2 From f5c122da543ebf98a5ccb3166768e38eea3120dd Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 14 Apr 2009 07:04:16 -0500 Subject: davinci: add arch_ioremap() which uses existing static mappings Add arch-specific ioremap() which uses any existing static mappings in place of doing a new mapping. From now on, drivers should always use ioremap() instead of IO_ADDRESS(). In addition, remove the davinci_[read|write]* macros in favor of using ioremap. Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-evm.c | 4 +- arch/arm/mach-davinci/devices.c | 2 + arch/arm/mach-davinci/id.c | 6 +- arch/arm/mach-davinci/include/mach/gpio.h | 4 +- arch/arm/mach-davinci/include/mach/hardware.h | 51 +++++------------ arch/arm/mach-davinci/include/mach/io.h | 20 ++----- arch/arm/mach-davinci/io.c | 22 +++++++- arch/arm/mach-davinci/irq.c | 6 +- arch/arm/mach-davinci/mux.c | 5 +- arch/arm/mach-davinci/psc.c | 2 + arch/arm/mach-davinci/time.c | 79 +++++++++++++++------------ arch/arm/mach-davinci/usb.c | 2 + 12 files changed, 105 insertions(+), 98 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c index 1b745c39d891..c2701d740a1d 100644 --- a/arch/arm/mach-davinci/board-evm.c +++ b/arch/arm/mach-davinci/board-evm.c @@ -36,6 +36,9 @@ #include #include +#define DAVINCI_CFC_ATA_BASE 0x01C66000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 + /* other misc. init functions */ void __init davinci_psc_init(void); void __init davinci_irq_init(void); @@ -422,7 +425,6 @@ static __init void davinci_evm_init(void) static __init void davinci_evm_irq_init(void) { - davinci_init_common_hw(); davinci_irq_init(); } diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 808633f9f03c..3ea6d477f06b 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -22,6 +22,8 @@ #include #include +#define DAVINCI_I2C_BASE 0x01C21000 + static struct resource i2c_resources[] = { { .start = DAVINCI_I2C_BASE, diff --git a/arch/arm/mach-davinci/id.c b/arch/arm/mach-davinci/id.c index 379f2baf66d6..018b994cd794 100644 --- a/arch/arm/mach-davinci/id.c +++ b/arch/arm/mach-davinci/id.c @@ -15,7 +15,7 @@ #include #include -#define JTAG_ID_BASE 0x01c40028 +#define JTAG_ID_BASE IO_ADDRESS(0x01c40028) static unsigned int davinci_revision; @@ -58,7 +58,7 @@ static u16 __init davinci_get_part_no(void) { u32 dev_id, part_no; - dev_id = davinci_readl(JTAG_ID_BASE); + dev_id = __raw_readl(JTAG_ID_BASE); part_no = ((dev_id >> 12) & 0xffff); @@ -72,7 +72,7 @@ static u8 __init davinci_get_variant(void) { u32 variant; - variant = davinci_readl(JTAG_ID_BASE); + variant = __raw_readl(JTAG_ID_BASE); variant = (variant >> 28) & 0xf; diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h index b456f079f43f..5e7c36b202f1 100644 --- a/arch/arm/mach-davinci/include/mach/gpio.h +++ b/arch/arm/mach-davinci/include/mach/gpio.h @@ -15,9 +15,11 @@ #include #include -#include + #include +#define DAVINCI_GPIO_BASE 0x01C67000 + /* * basic gpio routines * diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h index a2e8969afaca..48c77934d519 100644 --- a/arch/arm/mach-davinci/include/mach/hardware.h +++ b/arch/arm/mach-davinci/include/mach/hardware.h @@ -1,9 +1,9 @@ /* - * Common hardware definitions + * Hardware definitions common to all DaVinci family processors * - * Author: Kevin Hilman, MontaVista Software, Inc. + * Author: Kevin Hilman, Deep Root Systems, LLC * - * 2007 (c) MontaVista Software, Inc. This file is licensed under + * 2007 (c) Deep Root Systems, LLC. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. @@ -12,41 +12,16 @@ #define __ASM_ARCH_HARDWARE_H /* - * Base register addresses + * Before you add anything to ths file: + * + * This header is for defines common to ALL DaVinci family chips. + * Anything that is chip specific should go in .h, + * and the chip/board init code should then explicitly include + * .h */ -#define DAVINCI_DMA_3PCC_BASE (0x01C00000) -#define DAVINCI_DMA_3PTC0_BASE (0x01C10000) -#define DAVINCI_DMA_3PTC1_BASE (0x01C10400) -#define DAVINCI_I2C_BASE (0x01C21000) -#define DAVINCI_PWM0_BASE (0x01C22000) -#define DAVINCI_PWM1_BASE (0x01C22400) -#define DAVINCI_PWM2_BASE (0x01C22800) -#define DAVINCI_SYSTEM_MODULE_BASE (0x01C40000) -#define DAVINCI_PLL_CNTRL0_BASE (0x01C40800) -#define DAVINCI_PLL_CNTRL1_BASE (0x01C40C00) -#define DAVINCI_PWR_SLEEP_CNTRL_BASE (0x01C41000) -#define DAVINCI_SYSTEM_DFT_BASE (0x01C42000) -#define DAVINCI_IEEE1394_BASE (0x01C60000) -#define DAVINCI_USB_OTG_BASE (0x01C64000) -#define DAVINCI_CFC_ATA_BASE (0x01C66000) -#define DAVINCI_SPI_BASE (0x01C66800) -#define DAVINCI_GPIO_BASE (0x01C67000) -#define DAVINCI_UHPI_BASE (0x01C67800) -#define DAVINCI_VPSS_REGS_BASE (0x01C70000) -#define DAVINCI_EMAC_CNTRL_REGS_BASE (0x01C80000) -#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE (0x01C81000) -#define DAVINCI_EMAC_WRAPPER_RAM_BASE (0x01C82000) -#define DAVINCI_MDIO_CNTRL_REGS_BASE (0x01C84000) -#define DAVINCI_IMCOP_BASE (0x01CC0000) -#define DAVINCI_ASYNC_EMIF_CNTRL_BASE (0x01E00000) -#define DAVINCI_VLYNQ_BASE (0x01E01000) -#define DAVINCI_MCBSP_BASE (0x01E02000) -#define DAVINCI_MMC_SD_BASE (0x01E10000) -#define DAVINCI_MS_BASE (0x01E20000) -#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE (0x02000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE (0x04000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE (0x06000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE (0x08000000) -#define DAVINCI_VLYNQ_REMOTE_BASE (0x0C000000) +#define DAVINCI_SYSTEM_MODULE_BASE 0x01C40000 + +/* System control register offsets */ +#define DM64XX_VDD3P3V_PWDN 0x48 #endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-davinci/include/mach/io.h b/arch/arm/mach-davinci/include/mach/io.h index a48795fd2417..2479785405af 100644 --- a/arch/arm/mach-davinci/include/mach/io.h +++ b/arch/arm/mach-davinci/include/mach/io.h @@ -40,22 +40,12 @@ #else #define IOMEM(x) ((void __force __iomem *)(x)) -/* - * Functions to access the DaVinci IO region - * - * NOTE: - Use davinci_read/write[bwl] for physical register addresses - * - Use __raw_read/write[bwl]() for virtual register addresses - * - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses - * - DO NOT use hardcoded virtual addresses to allow changing the - * IO address space again if needed - */ -#define davinci_readb(a) __raw_readb(IO_ADDRESS(a)) -#define davinci_readw(a) __raw_readw(IO_ADDRESS(a)) -#define davinci_readl(a) __raw_readl(IO_ADDRESS(a)) +#define __arch_ioremap(p, s, t) davinci_ioremap(p, s, t) +#define __arch_iounmap(v) davinci_iounmap(v) -#define davinci_writeb(v, a) __raw_writeb(v, IO_ADDRESS(a)) -#define davinci_writew(v, a) __raw_writew(v, IO_ADDRESS(a)) -#define davinci_writel(v, a) __raw_writel(v, IO_ADDRESS(a)) +void __iomem *davinci_ioremap(unsigned long phys, size_t size, + unsigned int type); +void davinci_iounmap(volatile void __iomem *addr); #endif /* __ASSEMBLER__ */ #endif /* __ASM_ARCH_IO_H */ diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c index 71a7ae342b91..a548abb513e2 100644 --- a/arch/arm/mach-davinci/io.c +++ b/arch/arm/mach-davinci/io.c @@ -51,6 +51,26 @@ void __init davinci_map_common_io(void) davinci_check_revision(); } -void __init davinci_init_common_hw(void) +#define BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz))) +#define XLATE(p, pst, vst) ((void __iomem *)((p) - (pst) + (vst))) + +/* + * Intercept ioremap() requests for addresses in our fixed mapping regions. + */ +void __iomem *davinci_ioremap(unsigned long p, size_t size, unsigned int type) +{ + if (BETWEEN(p, IO_PHYS, IO_SIZE)) + return XLATE(p, IO_PHYS, IO_VIRT); + + return __arm_ioremap(p, size, type); +} +EXPORT_SYMBOL(davinci_ioremap); + +void davinci_iounmap(volatile void __iomem *addr) { + unsigned long virt = (unsigned long)addr; + + if (virt >= VMALLOC_START && virt < VMALLOC_END) + __iounmap(addr); } +EXPORT_SYMBOL(davinci_iounmap); diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c index 38021af8359a..e76835cf1018 100644 --- a/arch/arm/mach-davinci/irq.c +++ b/arch/arm/mach-davinci/irq.c @@ -40,14 +40,16 @@ #define IRQ_INTPRI0_REG_OFFSET 0x0030 #define IRQ_INTPRI7_REG_OFFSET 0x004C +#define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE) + static inline unsigned int davinci_irq_readl(int offset) { - return davinci_readl(DAVINCI_ARM_INTC_BASE + offset); + return __raw_readl(INTC_BASE + offset); } static inline void davinci_irq_writel(unsigned long value, int offset) { - davinci_writel(value, DAVINCI_ARM_INTC_BASE + offset); + __raw_writel(value, INTC_BASE + offset); } /* Disable interrupt */ diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c index 8ff9d8aca60b..53734dee1f93 100644 --- a/arch/arm/mach-davinci/mux.c +++ b/arch/arm/mach-davinci/mux.c @@ -23,6 +23,7 @@ static DEFINE_SPINLOCK(mux_lock); void davinci_mux_peripheral(unsigned int mux, unsigned int enable) { + void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE); u32 pinmux, muxreg = PINMUX0; if (mux >= DAVINCI_MUX_LEVEL2) { @@ -31,11 +32,11 @@ void davinci_mux_peripheral(unsigned int mux, unsigned int enable) } spin_lock(&mux_lock); - pinmux = davinci_readl(DAVINCI_SYSTEM_MODULE_BASE + muxreg); + pinmux = __raw_readl(base + muxreg); if (enable) pinmux |= (1 << mux); else pinmux &= ~(1 << mux); - davinci_writel(pinmux, DAVINCI_SYSTEM_MODULE_BASE + muxreg); + __raw_writel(pinmux, base + muxreg); spin_unlock(&mux_lock); } diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index c5098831741f..e44544ac2b16 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -28,6 +28,8 @@ #include #include +#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000 + /* PSC register offsets */ #define EPCPR 0x070 #define PTCMD 0x120 diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 6c227d4ba998..88864ae067b8 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -16,6 +16,9 @@ #include #include #include +#include +#include +#include #include #include @@ -24,6 +27,8 @@ #include #include #include +#include +#include "clock.h" static struct clock_event_device clockevent_davinci; @@ -99,9 +104,9 @@ struct timer_s { unsigned int id; unsigned long period; unsigned long opts; - unsigned long reg_base; - unsigned long tim_reg; - unsigned long prd_reg; + void __iomem *base; + unsigned long tim_off; + unsigned long prd_off; unsigned long enamode_shift; struct irqaction irqaction; }; @@ -114,15 +119,15 @@ static struct timer_s timers[]; static int timer32_config(struct timer_s *t) { - u32 tcr = davinci_readl(t->reg_base + TCR); + u32 tcr = __raw_readl(t->base + TCR); /* disable timer */ tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift); - davinci_writel(tcr, t->reg_base + TCR); + __raw_writel(tcr, t->base + TCR); /* reset counter to zero, set new period */ - davinci_writel(0, t->tim_reg); - davinci_writel(t->period, t->prd_reg); + __raw_writel(0, t->base + t->tim_off); + __raw_writel(t->period, t->base + t->prd_off); /* Set enable mode */ if (t->opts & TIMER_OPTS_ONESHOT) { @@ -131,13 +136,13 @@ static int timer32_config(struct timer_s *t) tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift; } - davinci_writel(tcr, t->reg_base + TCR); + __raw_writel(tcr, t->base + TCR); return 0; } static inline u32 timer32_read(struct timer_s *t) { - return davinci_readl(t->tim_reg); + return __raw_readl(t->base + t->tim_off); } static irqreturn_t timer_interrupt(int irq, void *dev_id) @@ -176,51 +181,54 @@ static struct timer_s timers[] = { static void __init timer_init(void) { - u32 bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE}; + u32 phys_bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE}; int i; /* Global init of each 64-bit timer as a whole */ for(i=0; i<2; i++) { - u32 tgcr, base = bases[i]; + u32 tgcr; + void __iomem *base = IO_ADDRESS(phys_bases[i]); /* Disabled, Internal clock source */ - davinci_writel(0, base + TCR); + __raw_writel(0, base + TCR); /* reset both timers, no pre-scaler for timer34 */ tgcr = 0; - davinci_writel(tgcr, base + TGCR); + __raw_writel(tgcr, base + TGCR); /* Set both timers to unchained 32-bit */ tgcr = TGCR_TIMMODE_32BIT_UNCHAINED << TGCR_TIMMODE_SHIFT; - davinci_writel(tgcr, base + TGCR); + __raw_writel(tgcr, base + TGCR); /* Unreset timers */ tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) | (TGCR_UNRESET << TGCR_TIM34RS_SHIFT); - davinci_writel(tgcr, base + TGCR); + __raw_writel(tgcr, base + TGCR); /* Init both counters to zero */ - davinci_writel(0, base + TIM12); - davinci_writel(0, base + TIM34); + __raw_writel(0, base + TIM12); + __raw_writel(0, base + TIM34); } /* Init of each timer as a 32-bit timer */ for (i=0; i< ARRAY_SIZE(timers); i++) { struct timer_s *t = &timers[i]; + u32 phys_base; if (t->name) { t->id = i; - t->reg_base = (IS_TIMER1(t->id) ? + phys_base = (IS_TIMER1(t->id) ? DAVINCI_TIMER1_BASE : DAVINCI_TIMER0_BASE); + t->base = IO_ADDRESS(phys_base); if (IS_TIMER_BOT(t->id)) { t->enamode_shift = 6; - t->tim_reg = t->reg_base + TIM12; - t->prd_reg = t->reg_base + PRD12; + t->tim_off = TIM12; + t->prd_off = PRD12; } else { t->enamode_shift = 22; - t->tim_reg = t->reg_base + TIM34; - t->prd_reg = t->reg_base + PRD34; + t->tim_off = TIM34; + t->prd_off = PRD34; } /* Register interrupt */ @@ -333,42 +341,43 @@ struct sys_timer davinci_timer = { /* reset board using watchdog timer */ void davinci_watchdog_reset(void) { - u32 tgcr, wdtcr, base = DAVINCI_WDOG_BASE; + u32 tgcr, wdtcr; + void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE); /* disable, internal clock source */ - davinci_writel(0, base + TCR); + __raw_writel(0, base + TCR); /* reset timer, set mode to 64-bit watchdog, and unreset */ tgcr = 0; - davinci_writel(tgcr, base + TCR); + __raw_writel(tgcr, base + TCR); tgcr = TGCR_TIMMODE_64BIT_WDOG << TGCR_TIMMODE_SHIFT; tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) | (TGCR_UNRESET << TGCR_TIM34RS_SHIFT); - davinci_writel(tgcr, base + TCR); + __raw_writel(tgcr, base + TCR); /* clear counter and period regs */ - davinci_writel(0, base + TIM12); - davinci_writel(0, base + TIM34); - davinci_writel(0, base + PRD12); - davinci_writel(0, base + PRD34); + __raw_writel(0, base + TIM12); + __raw_writel(0, base + TIM34); + __raw_writel(0, base + PRD12); + __raw_writel(0, base + PRD34); /* enable */ - wdtcr = davinci_readl(base + WDTCR); + wdtcr = __raw_readl(base + WDTCR); wdtcr |= WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT; - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); /* put watchdog in pre-active state */ wdtcr = (WDTCR_WDKEY_SEQ0 << WDTCR_WDKEY_SHIFT) | (WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT); - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); /* put watchdog in active state */ wdtcr = (WDTCR_WDKEY_SEQ1 << WDTCR_WDKEY_SHIFT) | (WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT); - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); /* write an invalid value to the WDKEY field to trigger * a watchdog reset */ wdtcr = 0x00004000; - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); } diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index 2429b79f6da2..abedb6337182 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -14,6 +14,8 @@ #include #include +#define DAVINCI_USB_OTG_BASE 0x01C64000 + #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) static struct musb_hdrc_eps_bits musb_eps[] = { { "ep1_tx", 8, }, -- cgit v1.2.2 From da1b94e6a68e1bdeb9cdda016cceb17228b37d25 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Thu, 23 Apr 2009 11:10:40 -0700 Subject: ARM: OMAP: Fix for possible race condition in omap_free_dma() Fix the possible race condition in omap_free_dma(). Function omap_free_dma() sets the dev_id = -1 and then accesses the channel afterwards to clear it. But setting the dev_id=-1 makes the channel available for allocation again. So it is possible someone else can grab it and results are unpredictable. To avod this DMA channle is cleared first and then the dev_id = -1 is set. Thanks to McNeil, Sean for ointing out this issue. Signed-off-by: Santosh Shilimkar Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dma.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 21cc0142b97a..7fc8c045ad5d 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -760,19 +760,12 @@ void omap_free_dma(int lch) { unsigned long flags; - spin_lock_irqsave(&dma_chan_lock, flags); if (dma_chan[lch].dev_id == -1) { pr_err("omap_dma: trying to free unallocated DMA channel %d\n", lch); - spin_unlock_irqrestore(&dma_chan_lock, flags); return; } - dma_chan[lch].dev_id = -1; - dma_chan[lch].next_lch = -1; - dma_chan[lch].callback = NULL; - spin_unlock_irqrestore(&dma_chan_lock, flags); - if (cpu_class_is_omap1()) { /* Disable all DMA interrupts for the channel. */ dma_write(0, CICR(lch)); @@ -798,6 +791,12 @@ void omap_free_dma(int lch) dma_write(0, CCR(lch)); omap_clear_dma(lch); } + + spin_lock_irqsave(&dma_chan_lock, flags); + dma_chan[lch].dev_id = -1; + dma_chan[lch].next_lch = -1; + dma_chan[lch].callback = NULL; + spin_unlock_irqrestore(&dma_chan_lock, flags); } EXPORT_SYMBOL(omap_free_dma); -- cgit v1.2.2 From ba16ec7cabb3f1aa7bbcb7b9982c4402a2e8ec02 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 23 Apr 2009 11:10:40 -0700 Subject: ARM: OMAP: Remove old dead gpio expander code This should be done with GPIO calls. Patches against the mainline tree welcome to add the necessary working functionality back. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-h3.c | 101 ------------------------- arch/arm/mach-omap2/board-h4.c | 95 ----------------------- arch/arm/plat-omap/include/mach/gpioexpander.h | 35 --------- arch/arm/plat-omap/include/mach/irda.h | 4 - 4 files changed, 235 deletions(-) delete mode 100644 arch/arm/plat-omap/include/mach/gpioexpander.h (limited to 'arch') diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 4695965114c4..f597968733b4 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -39,12 +39,10 @@ #include #include -#include #include #include #include #include -#include #include #include #include @@ -276,104 +274,6 @@ static struct platform_device h3_kp_device = { .resource = h3_kp_resources, }; - -/* Select between the IrDA and aGPS module - */ -static int h3_select_irda(struct device *dev, int state) -{ - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x26))) { - printk(KERN_ERR "Error reading from I/O EXPANDER \n"); - return err; - } - - /* 'P6' enable/disable IRDA_TX and IRDA_RX */ - if (state & IR_SEL) { /* IrDA */ - if ((err = write_gpio_expa(expa | 0x40, 0x26))) { - printk(KERN_ERR "Error writing to I/O EXPANDER \n"); - return err; - } - } else { - if ((err = write_gpio_expa(expa & ~0x40, 0x26))) { - printk(KERN_ERR "Error writing to I/O EXPANDER \n"); - return err; - } - } - return err; -} - -static void set_trans_mode(struct work_struct *work) -{ - struct omap_irda_config *irda_config = - container_of(work, struct omap_irda_config, gpio_expa.work); - int mode = irda_config->mode; - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x27)) != 0) { - printk(KERN_ERR "Error reading from I/O expander\n"); - } - - expa &= ~0x03; - - if (mode & IR_SIRMODE) { - expa |= 0x01; - } else { /* MIR/FIR */ - expa |= 0x03; - } - - if ((err = write_gpio_expa(expa, 0x27)) != 0) { - printk(KERN_ERR "Error writing to I/O expander\n"); - } -} - -static int h3_transceiver_mode(struct device *dev, int mode) -{ - struct omap_irda_config *irda_config = dev->platform_data; - - irda_config->mode = mode; - cancel_delayed_work(&irda_config->gpio_expa); - PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode); - schedule_delayed_work(&irda_config->gpio_expa, 0); - - return 0; -} - -static struct omap_irda_config h3_irda_data = { - .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE, - .transceiver_mode = h3_transceiver_mode, - .select_irda = h3_select_irda, - .rx_channel = OMAP_DMA_UART3_RX, - .tx_channel = OMAP_DMA_UART3_TX, - .dest_start = UART3_THR, - .src_start = UART3_RHR, - .tx_trigger = 0, - .rx_trigger = 0, -}; - -static struct resource h3_irda_resources[] = { - [0] = { - .start = INT_UART3, - .end = INT_UART3, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 irda_dmamask = 0xffffffff; - -static struct platform_device h3_irda_device = { - .name = "omapirda", - .id = 0, - .dev = { - .platform_data = &h3_irda_data, - .dma_mask = &irda_dmamask, - }, - .num_resources = ARRAY_SIZE(h3_irda_resources), - .resource = h3_irda_resources, -}; - static struct platform_device h3_lcd_device = { .name = "lcd_h3", .id = -1, @@ -395,7 +295,6 @@ static struct platform_device *devices[] __initdata = { &nand_device, &smc91x_device, &intlat_device, - &h3_irda_device, &h3_kp_device, &h3_lcd_device, }; diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index a0267a9ab466..e7d017cdc438 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -33,10 +33,8 @@ #include #include -#include #include #include -#include #include #include #include @@ -138,98 +136,6 @@ static struct platform_device h4_flash_device = { .resource = &h4_flash_resource, }; -/* Select between the IrDA and aGPS module - */ -static int h4_select_irda(struct device *dev, int state) -{ - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x21))) { - printk(KERN_ERR "Error reading from I/O expander\n"); - return err; - } - - /* 'P6' enable/disable IRDA_TX and IRDA_RX */ - if (state & IR_SEL) { /* IrDa */ - if ((err = write_gpio_expa(expa | 0x01, 0x21))) { - printk(KERN_ERR "Error writing to I/O expander\n"); - return err; - } - } else { - if ((err = write_gpio_expa(expa & ~0x01, 0x21))) { - printk(KERN_ERR "Error writing to I/O expander\n"); - return err; - } - } - return err; -} - -static void set_trans_mode(struct work_struct *work) -{ - struct omap_irda_config *irda_config = - container_of(work, struct omap_irda_config, gpio_expa.work); - int mode = irda_config->mode; - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x20)) != 0) { - printk(KERN_ERR "Error reading from I/O expander\n"); - } - - expa &= ~0x01; - - if (!(mode & IR_SIRMODE)) { /* MIR/FIR */ - expa |= 0x01; - } - - if ((err = write_gpio_expa(expa, 0x20)) != 0) { - printk(KERN_ERR "Error writing to I/O expander\n"); - } -} - -static int h4_transceiver_mode(struct device *dev, int mode) -{ - struct omap_irda_config *irda_config = dev->platform_data; - - irda_config->mode = mode; - cancel_delayed_work(&irda_config->gpio_expa); - PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode); - schedule_delayed_work(&irda_config->gpio_expa, 0); - - return 0; -} - -static struct omap_irda_config h4_irda_data = { - .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE, - .transceiver_mode = h4_transceiver_mode, - .select_irda = h4_select_irda, - .rx_channel = OMAP24XX_DMA_UART3_RX, - .tx_channel = OMAP24XX_DMA_UART3_TX, - .dest_start = OMAP_UART3_BASE, - .src_start = OMAP_UART3_BASE, - .tx_trigger = OMAP24XX_DMA_UART3_TX, - .rx_trigger = OMAP24XX_DMA_UART3_RX, -}; - -static struct resource h4_irda_resources[] = { - [0] = { - .start = INT_24XX_UART3_IRQ, - .end = INT_24XX_UART3_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device h4_irda_device = { - .name = "omapirda", - .id = -1, - .dev = { - .platform_data = &h4_irda_data, - }, - .num_resources = 1, - .resource = h4_irda_resources, -}; - static struct omap_kp_platform_data h4_kp_data = { .rows = 6, .cols = 7, @@ -255,7 +161,6 @@ static struct platform_device h4_lcd_device = { static struct platform_device *h4_devices[] __initdata = { &h4_flash_device, - &h4_irda_device, &h4_kp_device, &h4_lcd_device, }; diff --git a/arch/arm/plat-omap/include/mach/gpioexpander.h b/arch/arm/plat-omap/include/mach/gpioexpander.h deleted file mode 100644 index 90444a0d6b1a..000000000000 --- a/arch/arm/plat-omap/include/mach/gpioexpander.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/gpioexpander.h - * - * - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This package is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED - * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. - */ - -#ifndef __ASM_ARCH_OMAP_GPIOEXPANDER_H -#define __ASM_ARCH_OMAP_GPIOEXPANDER_H - -/* Function Prototypes for GPIO Expander functions */ - -#ifdef CONFIG_GPIOEXPANDER_OMAP -int read_gpio_expa(u8 *, int); -int write_gpio_expa(u8 , int); -#else -static inline int read_gpio_expa(u8 *val, int addr) -{ - return 0; -} -static inline int write_gpio_expa(u8 val, int addr) -{ - return 0; -} -#endif - -#endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */ diff --git a/arch/arm/plat-omap/include/mach/irda.h b/arch/arm/plat-omap/include/mach/irda.h index 8372a00d8e0b..40f60339d1c6 100644 --- a/arch/arm/plat-omap/include/mach/irda.h +++ b/arch/arm/plat-omap/include/mach/irda.h @@ -21,10 +21,6 @@ struct omap_irda_config { int transceiver_cap; int (*transceiver_mode)(struct device *dev, int mode); int (*select_irda)(struct device *dev, int state); - /* Very specific to the needs of some platforms (h3,h4) - * having calls which can sleep in irda_set_speed. - */ - struct delayed_work gpio_expa; int rx_channel; int tx_channel; unsigned long dest_start; -- cgit v1.2.2 From 1748ae0e95760d62de501743f883af6833f33357 Mon Sep 17 00:00:00 2001 From: Ladislav Michl Date: Thu, 23 Apr 2009 11:10:44 -0700 Subject: ARM: OMAP: MMC: Remove unused power_pin Remove unused power_pin Signed-off-by: Ladislav Michl Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/mach/mmc.h | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h index 4435bd434e17..81d5b36534b3 100644 --- a/arch/arm/plat-omap/include/mach/mmc.h +++ b/arch/arm/plat-omap/include/mach/mmc.h @@ -79,7 +79,6 @@ struct omap_mmc_platform_data { /* use the internal clock */ unsigned internal_clock:1; - s16 power_pin; int switch_pin; /* gpio (card detect) */ int gpio_wp; /* gpio (write protect) */ -- cgit v1.2.2 From 6a3260755fc0d86adacd912e3acf40e9ac5bbe2e Mon Sep 17 00:00:00 2001 From: Ladislav Michl Date: Thu, 23 Apr 2009 11:10:47 -0700 Subject: ARM: OMAP1: Simplify board-h2 MMC setup Simplify board-h2 MMC setup Signed-off-by: Ladislav Michl Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-h2-mmc.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c index 44d4a966bed9..46098f546824 100644 --- a/arch/arm/mach-omap1/board-h2-mmc.c +++ b/arch/arm/mach-omap1/board-h2-mmc.c @@ -26,19 +26,13 @@ static int mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { - if (power_on) - gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 1); - else - gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 0); - + gpio_set_value(H2_TPS_GPIO_MMC_PWR_EN, power_on); return 0; } static int mmc_late_init(struct device *dev) { - int ret; - - ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power"); + int ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power"); if (ret < 0) return ret; @@ -47,7 +41,7 @@ static int mmc_late_init(struct device *dev) return ret; } -static void mmc_shutdown(struct device *dev) +static void mmc_cleanup(struct device *dev) { gpio_free(H2_TPS_GPIO_MMC_PWR_EN); } @@ -60,7 +54,7 @@ static void mmc_shutdown(struct device *dev) static struct omap_mmc_platform_data mmc1_data = { .nr_slots = 1, .init = mmc_late_init, - .shutdown = mmc_shutdown, + .cleanup = mmc_cleanup, .dma_mask = 0xffffffff, .slots[0] = { .set_power = mmc_set_power, -- cgit v1.2.2 From bac5b29fb9582df22b4c1386162ac31b62edf121 Mon Sep 17 00:00:00 2001 From: Ladislav Michl Date: Thu, 23 Apr 2009 11:10:48 -0700 Subject: ARM: OMAP1: Fix mmc_set_power GPIO usage Simple simplification... Signed-off-by: Ladislav Michl Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-h3-mmc.c | 6 +----- arch/arm/mach-omap1/board-nokia770.c | 6 +----- 2 files changed, 2 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c index 0d8a3c195e2e..5e8877ce35e0 100644 --- a/arch/arm/mach-omap1/board-h3-mmc.c +++ b/arch/arm/mach-omap1/board-h3-mmc.c @@ -26,11 +26,7 @@ static int mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { - if (power_on) - gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 1); - else - gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 0); - + gpio_set_value(H3_TPS_GPIO_MMC_PWR_EN, power_on); return 0; } diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 7bc7a3cb9c51..d1ed1365319e 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -181,11 +181,7 @@ static struct omap_usb_config nokia770_usb_config __initdata = { static int nokia770_mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { - if (power_on) - gpio_set_value(NOKIA770_GPIO_MMC_POWER, 1); - else - gpio_set_value(NOKIA770_GPIO_MMC_POWER, 0); - + gpio_set_value(NOKIA770_GPIO_MMC_POWER, power_on); return 0; } -- cgit v1.2.2 From 6b7bff3169192e2870f68f47fde25a22e136918e Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Thu, 23 Apr 2009 11:10:48 -0700 Subject: ARM: OMAP2: Remove defines and resource init for OMAP24XX EAC There is no anymore legacy driver for OMAP24XX Enhanced Audio Controller in linux-omap and it was newer in mainline so cleanup these unneeded defines and initialization code. Signed-off-by: Jarkko Nikula Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/devices.c | 33 ----------- arch/arm/plat-omap/include/mach/eac.h | 100 ---------------------------------- 2 files changed, 133 deletions(-) delete mode 100644 arch/arm/plat-omap/include/mach/eac.h (limited to 'arch') diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index d6b4b2f8722f..496983ade97e 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE) @@ -366,38 +365,6 @@ static void omap_init_mcspi(void) static inline void omap_init_mcspi(void) {} #endif -#ifdef CONFIG_SND_OMAP24XX_EAC - -#define OMAP2_EAC_BASE 0x48090000 - -static struct resource omap2_eac_resources[] = { - { - .start = OMAP2_EAC_BASE, - .end = OMAP2_EAC_BASE + 0x109, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap2_eac_device = { - .name = "omap24xx-eac", - .id = -1, - .num_resources = ARRAY_SIZE(omap2_eac_resources), - .resource = omap2_eac_resources, - .dev = { - .platform_data = NULL, - }, -}; - -void omap_init_eac(struct eac_platform_data *pdata) -{ - omap2_eac_device.dev.platform_data = pdata; - platform_device_register(&omap2_eac_device); -} - -#else -void omap_init_eac(struct eac_platform_data *pdata) {} -#endif - #ifdef CONFIG_OMAP_SHA1_MD5 static struct resource sha1_md5_resources[] = { { diff --git a/arch/arm/plat-omap/include/mach/eac.h b/arch/arm/plat-omap/include/mach/eac.h deleted file mode 100644 index 9e62cf030270..000000000000 --- a/arch/arm/plat-omap/include/mach/eac.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach2/eac.h - * - * Defines for Enhanced Audio Controller - * - * Contact: Jarkko Nikula - * - * Copyright (C) 2006 Nokia Corporation - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __ASM_ARM_ARCH_OMAP2_EAC_H -#define __ASM_ARM_ARCH_OMAP2_EAC_H - -#include -#include -#include - -#include - -/* master codec clock source */ -#define EAC_MCLK_EXT_MASK 0x100 -enum eac_mclk_src { - EAC_MCLK_INT_11290000, /* internal 96 MHz / 8.5 = 11.29 Mhz */ - EAC_MCLK_EXT_11289600 = EAC_MCLK_EXT_MASK, - EAC_MCLK_EXT_12288000, - EAC_MCLK_EXT_2x11289600, - EAC_MCLK_EXT_2x12288000, -}; - -/* codec port interface mode */ -enum eac_codec_mode { - EAC_CODEC_PCM, - EAC_CODEC_AC97, - EAC_CODEC_I2S_MASTER, /* codec port, I.e. EAC is the master */ - EAC_CODEC_I2S_SLAVE, -}; - -/* configuration structure for I2S mode */ -struct eac_i2s_conf { - /* if enabled, then first data slot (left channel) is signaled as - * positive level of frame sync EAC.AC_FS */ - unsigned polarity_changed_mode:1; - /* if enabled, then serial data starts one clock cycle after the - * of EAC.AC_FS for first audio slot */ - unsigned sync_delay_enable:1; -}; - -/* configuration structure for EAC codec port */ -struct eac_codec { - enum eac_mclk_src mclk_src; - - enum eac_codec_mode codec_mode; - union { - struct eac_i2s_conf i2s; - } codec_conf; - - int default_rate; /* audio sampling rate */ - - int (* set_power)(void *private_data, int dac, int adc); - int (* register_controls)(void *private_data, - struct snd_card *card); - const char *short_name; - - void *private_data; -}; - -/* structure for passing platform dependent data to the EAC driver */ -struct eac_platform_data { - int (* init)(struct device *eac_dev); - void (* cleanup)(struct device *eac_dev); - /* these callbacks are used to configure & control external MCLK - * source. NULL if not used */ - int (* enable_ext_clocks)(struct device *eac_dev); - void (* disable_ext_clocks)(struct device *eac_dev); -}; - -extern void omap_init_eac(struct eac_platform_data *pdata); - -extern int eac_register_codec(struct device *eac_dev, struct eac_codec *codec); -extern void eac_unregister_codec(struct device *eac_dev); - -extern int eac_set_mode(struct device *eac_dev, int play, int rec); - -#endif /* __ASM_ARM_ARCH_OMAP2_EAC_H */ -- cgit v1.2.2 From d94a2eddf50c4aa1553acf3025f45d03704a1f97 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 23 Apr 2009 11:10:49 -0700 Subject: ARM: OMAP2: possible division by 0 In linus' git tree the functions can be found at: vi arch/arm/mach-omap2/usb-tusb6010.c +200 - tusb6010_platform_retime() vi arch/arm/mach-omap2/gpmc.c +94 - gpmc_get_fclk_period() vi arch/arm/mach-omap2/usb-tusb6010.c +53 - tusb_set_async_mode() vi arch/arm/mach-omap2/usb-tusb6010.c +111 - tusb_set_sync_mode() is -ENODEV appropriate when sysclk_ps == 0? This was found by code analysis, please review. ------------------------------>8-------------8<--------------------------------- gpmc_get_fclk_period() may return 0 when gpmc_l3_clk is not enabled. This is not checked in tusb6010_platform_retime() nor in tusb_set_async_mode() it seems. In tusb_set_sync_mode() this may result in a division by zero. Signed-off-by: Roel Kluin Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/usb-tusb6010.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 15e509013def..8df55f40f4c0 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -187,7 +187,7 @@ int tusb6010_platform_retime(unsigned is_refclk) unsigned sysclk_ps; int status; - if (!refclk_psec) + if (!refclk_psec || sysclk_ps == 0) return -ENODEV; sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60; -- cgit v1.2.2 From b3bb4f688c225d9455bbd59e98f634f98c1074d0 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 23 Apr 2009 11:10:49 -0700 Subject: ARM: OMAP2/3: GPIO: do not attempt to wake-enable The GPIO IRQ enable/disable path attempts to also enable IRQ wake support for the parent GPIO bank IRQ as well. However, since there is no 'set_wake' hook for the bank IRQs, these calls will always fail. Also, since the enable will fail on the suspend path, the disable on the resume path will trigger unbalanced enable/disable warnings. This was discovered in the suspend/resume path on OMAP3/Beagle using the gpio-keys driver which disables/re-enables GPIO IRQ wakeups in the suspend/resume path. Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/gpio.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index d3fa41e3d8c5..210a1c045554 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -921,13 +921,10 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) case METHOD_MPUIO: case METHOD_GPIO_1610: spin_lock_irqsave(&bank->lock, flags); - if (enable) { + if (enable) bank->suspend_wakeup |= (1 << gpio); - enable_irq_wake(bank->irq); - } else { - disable_irq_wake(bank->irq); + else bank->suspend_wakeup &= ~(1 << gpio); - } spin_unlock_irqrestore(&bank->lock, flags); return 0; #endif @@ -940,13 +937,10 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) return -EINVAL; } spin_lock_irqsave(&bank->lock, flags); - if (enable) { + if (enable) bank->suspend_wakeup |= (1 << gpio); - enable_irq_wake(bank->irq); - } else { - disable_irq_wake(bank->irq); + else bank->suspend_wakeup &= ~(1 << gpio); - } spin_unlock_irqrestore(&bank->lock, flags); return 0; #endif -- cgit v1.2.2 From c485ab50dd90412d88e25ed30b4e0d5ff636ffe2 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Thu, 23 Apr 2009 11:10:49 -0700 Subject: ARM: OMAP3: remove duplicated #include Removed duplicated #include in arch/arm/mach-omap2/board-rx51.c. Signed-off-by: Huang Weiyi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-rx51.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 3a0daac6c839..374ff63c3eb2 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include -- cgit v1.2.2 From bedfd15410a331e4183d3d926bb944682cad61f3 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Thu, 23 Apr 2009 11:10:50 -0700 Subject: ARM: OMAP3: Fixed spurious IRQ issue for GPIO interrupts Flush posted write to IRQSTATUS register in GPIO IRQ handler. This eliminates the below error for all peripherals that use GPIO interrupts. <4>Spurious irq 95: 0xffffffdf, please flush posted write for irq 31 Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/gpio.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 210a1c045554..17d7afe42b83 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -758,8 +758,12 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) /* Workaround for clearing DSP GPIO interrupts to allow retention */ #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) + reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2; if (cpu_is_omap24xx() || cpu_is_omap34xx()) - __raw_writel(gpio_mask, bank->base + OMAP24XX_GPIO_IRQSTATUS2); + __raw_writel(gpio_mask, reg); + + /* Flush posted write for the irq status to avoid spurious interrupts */ + __raw_readl(reg); #endif } -- cgit v1.2.2 From 846c29f109fc27bd93817271689a752afc9168f8 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Thu, 23 Apr 2009 11:10:50 -0700 Subject: ARM: OMAP3: Clean up spurious interrupt check logic SPURIOUSIRQ is contained in bits 31:7 of INTC_SIR, so INTC_SIR must be right shifted by 7, not 6. No change in logic, only changes for better readability. Refer to register definition of INTCPS_SIR_IRQ in OMAP3 Manual. Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/irq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 9ba20d985dda..998c5c45587e 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -73,9 +73,9 @@ static int omap_check_spurious(unsigned int irq) u32 sir, spurious; sir = intc_bank_read_reg(&irq_banks[0], INTC_SIR); - spurious = sir >> 6; + spurious = sir >> 7; - if (spurious > 1) { + if (spurious) { printk(KERN_WARNING "Spurious irq %i: 0x%08x, please flush " "posted write for irq %i\n", irq, sir, previous_irq); -- cgit v1.2.2 From fdd8b079e33d4711527ace19798e9db99a056469 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Wed, 22 Apr 2009 20:08:17 +0100 Subject: [ARM] 5460/1: Orion: reduce namespace pollution Symbols like SOFT_RESET are way too generic to be exported at large. To avoid this, let's move the mbus bridge register defines into a separate file and include it where needed. This affects mach-kirkwood, mach-loki, mach-mv78xx0 and mach-orion5x simultaneously as they all share code in plat-orion which relies on those defines. Some other defines have been moved to narrower scopes, or simply deleted when they had no user. This fixes compilation problem with mpt2sas on the above listed platforms. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/mach-kirkwood/common.c | 1 + arch/arm/mach-kirkwood/include/mach/bridge-regs.h | 42 ++++++++++++++ arch/arm/mach-kirkwood/include/mach/debug-macro.S | 2 +- arch/arm/mach-kirkwood/include/mach/entry-macro.S | 2 +- arch/arm/mach-kirkwood/include/mach/kirkwood.h | 53 +++++------------- arch/arm/mach-kirkwood/include/mach/system.h | 3 +- arch/arm/mach-kirkwood/irq.c | 1 + arch/arm/mach-loki/addr-map.c | 1 + arch/arm/mach-loki/include/mach/bridge-regs.h | 33 +++++++++++ arch/arm/mach-loki/include/mach/entry-macro.S | 2 +- arch/arm/mach-loki/include/mach/loki.h | 14 ----- arch/arm/mach-loki/include/mach/system.h | 3 +- arch/arm/mach-loki/irq.c | 1 + arch/arm/mach-mv78xx0/common.c | 1 + arch/arm/mach-mv78xx0/include/mach/bridge-regs.h | 39 +++++++++++++ arch/arm/mach-mv78xx0/include/mach/entry-macro.S | 2 +- arch/arm/mach-mv78xx0/include/mach/mv78xx0.h | 42 ++++---------- arch/arm/mach-mv78xx0/include/mach/system.h | 3 +- arch/arm/mach-mv78xx0/irq.c | 2 +- arch/arm/mach-orion5x/addr-map.c | 2 + arch/arm/mach-orion5x/include/mach/bridge-regs.h | 41 ++++++++++++++ arch/arm/mach-orion5x/include/mach/entry-macro.S | 2 +- arch/arm/mach-orion5x/include/mach/orion5x.h | 68 +++++++---------------- arch/arm/mach-orion5x/include/mach/system.h | 3 +- arch/arm/mach-orion5x/irq.c | 2 +- arch/arm/mach-orion5x/mss2-setup.c | 1 + arch/arm/mach-orion5x/pci.c | 1 + arch/arm/plat-orion/time.c | 2 +- 28 files changed, 222 insertions(+), 147 deletions(-) create mode 100644 arch/arm/mach-kirkwood/include/mach/bridge-regs.h create mode 100644 arch/arm/mach-loki/include/mach/bridge-regs.h create mode 100644 arch/arm/mach-mv78xx0/include/mach/bridge-regs.h create mode 100644 arch/arm/mach-orion5x/include/mach/bridge-regs.h (limited to 'arch') diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 16dc9ea08393..eeb00240d784 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h new file mode 100644 index 000000000000..4f7029f521cc --- /dev/null +++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h @@ -0,0 +1,42 @@ +/* + * arch/arm/mach-kirkwood/include/mach/bridge-regs.h + * + * Mbus-L to Mbus Bridge Registers + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_BRIDGE_REGS_H +#define __ASM_ARCH_BRIDGE_REGS_H + +#include + +#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) +#define CPU_RESET 0x00000002 + +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define SOFT_RESET_OUT_EN 0x00000004 + +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) +#define SOFT_RESET 0x00000001 + +#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) +#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) +#define BRIDGE_INT_TIMER0 0x0002 +#define BRIDGE_INT_TIMER1 0x0004 +#define BRIDGE_INT_TIMER1_CLR (~0x0004) + +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) +#define IRQ_CAUSE_LOW_OFF 0x0000 +#define IRQ_MASK_LOW_OFF 0x0004 +#define IRQ_CAUSE_HIGH_OFF 0x0010 +#define IRQ_MASK_HIGH_OFF 0x0014 + +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) + +#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128) +#define L2_WRITETHROUGH 0x00000010 + +#endif diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S index c0cc5b5c82ac..a4a55c199d77 100644 --- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S +++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S @@ -6,7 +6,7 @@ * published by the Free Software Foundation. */ -#include +#include .macro addruart,rx mrc p15, 0, \rx, c1, c0 diff --git a/arch/arm/mach-kirkwood/include/mach/entry-macro.S b/arch/arm/mach-kirkwood/include/mach/entry-macro.S index 83e0cba77b36..8939d36f893c 100644 --- a/arch/arm/mach-kirkwood/include/mach/entry-macro.S +++ b/arch/arm/mach-kirkwood/include/mach/entry-macro.S @@ -8,7 +8,7 @@ * warranty of any kind, whether express or implied. */ -#include +#include .macro disable_fiq .endm diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index 38c986853590..b3e13958821d 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -43,44 +43,6 @@ #define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000 #define KIRKWOOD_PCIE_MEM_SIZE SZ_128M -/* - * MBUS bridge registers. - */ -#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) -#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) -#define CPU_RESET 0x00000002 -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) -#define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) -#define SOFT_RESET 0x00000001 -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) -#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 -#define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) -#define IRQ_CAUSE_LOW_OFF 0x0000 -#define IRQ_MASK_LOW_OFF 0x0004 -#define IRQ_CAUSE_HIGH_OFF 0x0010 -#define IRQ_MASK_HIGH_OFF 0x0014 -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) -#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128) -#define L2_WRITETHROUGH 0x00000010 - -/* - * Supported devices and revisions. - */ -#define MV88F6281_DEV_ID 0x6281 -#define MV88F6281_REV_Z0 0 -#define MV88F6281_REV_A0 2 - -#define MV88F6192_DEV_ID 0x6192 -#define MV88F6192_REV_Z0 0 -#define MV88F6192_REV_A0 2 - -#define MV88F6180_DEV_ID 0x6180 -#define MV88F6180_REV_A0 2 - /* * Register Map */ @@ -99,6 +61,8 @@ #define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100) #define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) +#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) + #define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000) #define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000) @@ -119,5 +83,18 @@ #define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x90000) +/* + * Supported devices and revisions. + */ +#define MV88F6281_DEV_ID 0x6281 +#define MV88F6281_REV_Z0 0 +#define MV88F6281_REV_A0 2 + +#define MV88F6192_DEV_ID 0x6192 +#define MV88F6192_REV_Z0 0 +#define MV88F6192_REV_A0 2 + +#define MV88F6180_DEV_ID 0x6180 +#define MV88F6180_REV_A0 2 #endif diff --git a/arch/arm/mach-kirkwood/include/mach/system.h b/arch/arm/mach-kirkwood/include/mach/system.h index 23a1914c1da8..7568e95d279b 100644 --- a/arch/arm/mach-kirkwood/include/mach/system.h +++ b/arch/arm/mach-kirkwood/include/mach/system.h @@ -9,8 +9,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include -#include +#include static inline void arch_idle(void) { diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c index 06083b23bb44..28020abf49e1 100644 --- a/arch/arm/mach-kirkwood/irq.c +++ b/arch/arm/mach-kirkwood/irq.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include "common.h" diff --git a/arch/arm/mach-loki/addr-map.c b/arch/arm/mach-loki/addr-map.c index 0332d8f5c18c..b9537c97beba 100644 --- a/arch/arm/mach-loki/addr-map.c +++ b/arch/arm/mach-loki/addr-map.c @@ -38,6 +38,7 @@ /* * CPU Address Decode Windows registers */ +#define BRIDGE_REG(x) (BRIDGE_VIRT_BASE | (x)) #define CPU_WIN_CTRL(n) BRIDGE_REG(0x000 | ((n) << 4)) #define CPU_WIN_BASE(n) BRIDGE_REG(0x004 | ((n) << 4)) #define CPU_WIN_REMAP_LO(n) BRIDGE_REG(0x008 | ((n) << 4)) diff --git a/arch/arm/mach-loki/include/mach/bridge-regs.h b/arch/arm/mach-loki/include/mach/bridge-regs.h new file mode 100644 index 000000000000..a3fabf70044f --- /dev/null +++ b/arch/arm/mach-loki/include/mach/bridge-regs.h @@ -0,0 +1,33 @@ +/* + * arch/arm/mach-loki/include/mach/bridge-regs.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_BRIDGE_REGS_H +#define __ASM_ARCH_BRIDGE_REGS_H + +#include + +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define SOFT_RESET_OUT_EN 0x00000004 + +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) +#define SOFT_RESET 0x00000001 + +#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) + +#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) +#define BRIDGE_INT_TIMER0 0x0002 +#define BRIDGE_INT_TIMER1 0x0004 +#define BRIDGE_INT_TIMER1_CLR 0x0004 + +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) +#define IRQ_CAUSE_OFF 0x0000 +#define IRQ_MASK_OFF 0x0004 + +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) + +#endif diff --git a/arch/arm/mach-loki/include/mach/entry-macro.S b/arch/arm/mach-loki/include/mach/entry-macro.S index 332af38ec13c..bc917ed3a62d 100644 --- a/arch/arm/mach-loki/include/mach/entry-macro.S +++ b/arch/arm/mach-loki/include/mach/entry-macro.S @@ -8,7 +8,7 @@ * warranty of any kind, whether express or implied. */ -#include +#include .macro disable_fiq .endm diff --git a/arch/arm/mach-loki/include/mach/loki.h b/arch/arm/mach-loki/include/mach/loki.h index c00af6ba5578..bfca7c265f43 100644 --- a/arch/arm/mach-loki/include/mach/loki.h +++ b/arch/arm/mach-loki/include/mach/loki.h @@ -58,20 +58,6 @@ #define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) #define BRIDGE_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x20000) -#define BRIDGE_REG(x) (BRIDGE_VIRT_BASE | (x)) -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) -#define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) -#define SOFT_RESET 0x00000001 -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) -#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 -#define BRIDGE_INT_TIMER1_CLR 0x0004 -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) -#define IRQ_CAUSE_OFF 0x0000 -#define IRQ_MASK_OFF 0x0004 -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) #define PCIE0_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x30000) diff --git a/arch/arm/mach-loki/include/mach/system.h b/arch/arm/mach-loki/include/mach/system.h index c1de36fe9b37..71895199a534 100644 --- a/arch/arm/mach-loki/include/mach/system.h +++ b/arch/arm/mach-loki/include/mach/system.h @@ -9,8 +9,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include -#include +#include static inline void arch_idle(void) { diff --git a/arch/arm/mach-loki/irq.c b/arch/arm/mach-loki/irq.c index e1f97338d5b7..76b211bfcca2 100644 --- a/arch/arm/mach-loki/irq.c +++ b/arch/arm/mach-loki/irq.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include "common.h" diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index a575daaa62d1..9ba595083dab 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h new file mode 100644 index 000000000000..2d14c4fe294d --- /dev/null +++ b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h @@ -0,0 +1,39 @@ +/* + * arch/arm/mach-mv78xx0/include/mach/bridge-regs.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_BRIDGE_REGS_H +#define __ASM_ARCH_BRIDGE_REGS_H + +#include + +#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) +#define L2_WRITETHROUGH 0x00020000 + +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define SOFT_RESET_OUT_EN 0x00000004 + +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) +#define SOFT_RESET 0x00000001 + +#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) +#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) +#define BRIDGE_INT_TIMER0 0x0002 +#define BRIDGE_INT_TIMER1 0x0004 +#define BRIDGE_INT_TIMER1_CLR (~0x0004) + +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) +#define IRQ_CAUSE_ERR_OFF 0x0000 +#define IRQ_CAUSE_LOW_OFF 0x0004 +#define IRQ_CAUSE_HIGH_OFF 0x0008 +#define IRQ_MASK_ERR_OFF 0x000c +#define IRQ_MASK_LOW_OFF 0x0010 +#define IRQ_MASK_HIGH_OFF 0x0014 + +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) + +#endif diff --git a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S index fbfb2693ce6c..66ae2d29e773 100644 --- a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S +++ b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S @@ -8,7 +8,7 @@ * warranty of any kind, whether express or implied. */ -#include +#include .macro disable_fiq .endm diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h index 582cffc733ad..d715b92b0908 100644 --- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h +++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h @@ -59,37 +59,6 @@ * Core-specific peripheral registers. */ #define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE) -#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) -#define L2_WRITETHROUGH 0x00020000 -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) -#define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) -#define SOFT_RESET 0x00000001 -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) -#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 -#define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) -#define IRQ_CAUSE_ERR_OFF 0x0000 -#define IRQ_CAUSE_LOW_OFF 0x0004 -#define IRQ_CAUSE_HIGH_OFF 0x0008 -#define IRQ_MASK_ERR_OFF 0x000c -#define IRQ_MASK_LOW_OFF 0x0010 -#define IRQ_MASK_HIGH_OFF 0x0014 -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) - -/* - * Supported devices and revisions. - */ -#define MV78X00_Z0_DEV_ID 0x6381 -#define MV78X00_REV_Z0 1 - -#define MV78100_DEV_ID 0x7810 -#define MV78100_REV_A0 1 - -#define MV78200_DEV_ID 0x7820 -#define MV78200_REV_A0 1 /* * Register Map @@ -135,5 +104,16 @@ #define SATA_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0xa0000) +/* + * Supported devices and revisions. + */ +#define MV78X00_Z0_DEV_ID 0x6381 +#define MV78X00_REV_Z0 1 + +#define MV78100_DEV_ID 0x7810 +#define MV78100_REV_A0 1 + +#define MV78200_DEV_ID 0x7820 +#define MV78200_REV_A0 1 #endif diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h index 1d6350b22d0b..66e7ce4e90bd 100644 --- a/arch/arm/mach-mv78xx0/include/mach/system.h +++ b/arch/arm/mach-mv78xx0/include/mach/system.h @@ -9,8 +9,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include -#include +#include static inline void arch_idle(void) { diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c index 30b7e4bcdbc7..f289b0ea7dcf 100644 --- a/arch/arm/mach-mv78xx0/irq.c +++ b/arch/arm/mach-mv78xx0/irq.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include #include "common.h" diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c index 719957e05d9e..c14d12137276 100644 --- a/arch/arm/mach-orion5x/addr-map.c +++ b/arch/arm/mach-orion5x/addr-map.c @@ -57,12 +57,14 @@ /* * Helpers to get DDR bank info */ +#define ORION5X_DDR_REG(x) (ORION5X_DDR_VIRT_BASE | (x)) #define DDR_BASE_CS(n) ORION5X_DDR_REG(0x1500 + ((n) << 3)) #define DDR_SIZE_CS(n) ORION5X_DDR_REG(0x1504 + ((n) << 3)) /* * CPU Address Decode Windows registers */ +#define ORION5X_BRIDGE_REG(x) (ORION5X_BRIDGE_VIRT_BASE | (x)) #define CPU_WIN_CTRL(n) ORION5X_BRIDGE_REG(0x000 | ((n) << 4)) #define CPU_WIN_BASE(n) ORION5X_BRIDGE_REG(0x004 | ((n) << 4)) #define CPU_WIN_REMAP_LO(n) ORION5X_BRIDGE_REG(0x008 | ((n) << 4)) diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h new file mode 100644 index 000000000000..be896e59d3e7 --- /dev/null +++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h @@ -0,0 +1,41 @@ +/* + * arch/arm/mach-orion5x/include/mach/bridge-regs.h + * + * Orion CPU Bridge Registers + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_BRIDGE_REGS_H +#define __ASM_ARCH_BRIDGE_REGS_H + +#include + +#define CPU_CONF (ORION5X_BRIDGE_VIRT_BASE | 0x100) + +#define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE | 0x104) + +#define CPU_RESET_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x108) +#define WDT_RESET 0x0002 + +#define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE | 0x10c) + +#define POWER_MNG_CTRL_REG (ORION5X_BRIDGE_VIRT_BASE | 0x11C) + +#define BRIDGE_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x110) +#define WDT_INT_REQ 0x0008 + +#define BRIDGE_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x114) +#define BRIDGE_INT_TIMER0 0x0002 +#define BRIDGE_INT_TIMER1 0x0004 +#define BRIDGE_INT_TIMER1_CLR (~0x0004) + +#define MAIN_IRQ_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x200) + +#define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x204) + +#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300) + +#endif diff --git a/arch/arm/mach-orion5x/include/mach/entry-macro.S b/arch/arm/mach-orion5x/include/mach/entry-macro.S index 4351937035cd..d658992e5401 100644 --- a/arch/arm/mach-orion5x/include/mach/entry-macro.S +++ b/arch/arm/mach-orion5x/include/mach/entry-macro.S @@ -8,7 +8,7 @@ * warranty of any kind, whether express or implied. */ -#include +#include .macro disable_fiq .endm diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h index 67bda31406dd..377a773ae53f 100644 --- a/arch/arm/mach-orion5x/include/mach/orion5x.h +++ b/arch/arm/mach-orion5x/include/mach/orion5x.h @@ -60,31 +60,11 @@ #define ORION5X_PCI_MEM_PHYS_BASE 0xe8000000 #define ORION5X_PCI_MEM_SIZE SZ_128M -/******************************************************************************* - * Supported Devices & Revisions - ******************************************************************************/ -/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */ -#define MV88F5181_DEV_ID 0x5181 -#define MV88F5181_REV_B1 3 -#define MV88F5181L_REV_A0 8 -#define MV88F5181L_REV_A1 9 -/* Orion-NAS (88F5182) */ -#define MV88F5182_DEV_ID 0x5182 -#define MV88F5182_REV_A2 2 -/* Orion-2 (88F5281) */ -#define MV88F5281_DEV_ID 0x5281 -#define MV88F5281_REV_D0 4 -#define MV88F5281_REV_D1 5 -#define MV88F5281_REV_D2 6 -/* Orion-1-90 (88F6183) */ -#define MV88F6183_DEV_ID 0x6183 -#define MV88F6183_REV_B0 3 - /******************************************************************************* * Orion Registers Map ******************************************************************************/ + #define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x00000) -#define ORION5X_DDR_REG(x) (ORION5X_DDR_VIRT_BASE | (x)) #define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000) #define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000) @@ -97,34 +77,25 @@ #define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100) #define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000) -#define ORION5X_BRIDGE_REG(x) (ORION5X_BRIDGE_VIRT_BASE | (x)) -#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300) #define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000) -#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE | (x)) #define ORION5X_PCIE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x40000) -#define ORION5X_PCIE_REG(x) (ORION5X_PCIE_VIRT_BASE | (x)) #define ORION5X_USB0_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x50000) #define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x50000) -#define ORION5X_USB0_REG(x) (ORION5X_USB0_VIRT_BASE | (x)) #define ORION5X_XOR_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x60900) #define ORION5X_XOR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x60900) -#define ORION5X_XOR_REG(x) (ORION5X_XOR_VIRT_BASE | (x)) #define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x70000) #define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x70000) -#define ORION5X_ETH_REG(x) (ORION5X_ETH_VIRT_BASE | (x)) #define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x80000) #define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x80000) -#define ORION5X_SATA_REG(x) (ORION5X_SATA_VIRT_BASE | (x)) #define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0xa0000) #define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0xa0000) -#define ORION5X_USB1_REG(x) (ORION5X_USB1_VIRT_BASE | (x)) /******************************************************************************* * Device Bus Registers @@ -142,23 +113,24 @@ #define DEV_BUS_INT_CAUSE ORION5X_DEV_BUS_REG(0x4d0) #define DEV_BUS_INT_MASK ORION5X_DEV_BUS_REG(0x4d4) -/*************************************************************************** - * Orion CPU Bridge Registers - **************************************************************************/ -#define CPU_CONF ORION5X_BRIDGE_REG(0x100) -#define CPU_CTRL ORION5X_BRIDGE_REG(0x104) -#define CPU_RESET_MASK ORION5X_BRIDGE_REG(0x108) -#define WDT_RESET 0x0002 -#define CPU_SOFT_RESET ORION5X_BRIDGE_REG(0x10c) -#define POWER_MNG_CTRL_REG ORION5X_BRIDGE_REG(0x11C) -#define BRIDGE_CAUSE ORION5X_BRIDGE_REG(0x110) -#define WDT_INT_REQ 0x0008 -#define BRIDGE_MASK ORION5X_BRIDGE_REG(0x114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 -#define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define MAIN_IRQ_CAUSE ORION5X_BRIDGE_REG(0x200) -#define MAIN_IRQ_MASK ORION5X_BRIDGE_REG(0x204) - +/******************************************************************************* + * Supported Devices & Revisions + ******************************************************************************/ +/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */ +#define MV88F5181_DEV_ID 0x5181 +#define MV88F5181_REV_B1 3 +#define MV88F5181L_REV_A0 8 +#define MV88F5181L_REV_A1 9 +/* Orion-NAS (88F5182) */ +#define MV88F5182_DEV_ID 0x5182 +#define MV88F5182_REV_A2 2 +/* Orion-2 (88F5281) */ +#define MV88F5281_DEV_ID 0x5281 +#define MV88F5281_REV_D0 4 +#define MV88F5281_REV_D1 5 +#define MV88F5281_REV_D2 6 +/* Orion-1-90 (88F6183) */ +#define MV88F6183_DEV_ID 0x6183 +#define MV88F6183_REV_B0 3 #endif diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h index 9b8db1dcfa83..e912490fff23 100644 --- a/arch/arm/mach-orion5x/include/mach/system.h +++ b/arch/arm/mach-orion5x/include/mach/system.h @@ -11,8 +11,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include -#include +#include static inline void arch_idle(void) { diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c index e03f7b45cb0d..d7512b925a85 100644 --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include #include #include "common.h" diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c index 68acca98e638..41e6d5033d54 100644 --- a/arch/arm/mach-orion5x/mss2-setup.c +++ b/arch/arm/mach-orion5x/mss2-setup.c @@ -26,6 +26,7 @@ #include #include #include +#include #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index d0a785a3b880..36dc5413cc97 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -196,6 +196,7 @@ static int __init pcie_setup(struct pci_sys_data *sys) /***************************************************************************** * PCI controller ****************************************************************************/ +#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE | (x)) #define PCI_MODE ORION5X_PCI_REG(0xd00) #define PCI_CMD ORION5X_PCI_REG(0xc00) #define PCI_P2P_CONF ORION5X_PCI_REG(0x1d14) diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c index 6fa2923e6dca..bdeb166b4b20 100644 --- a/arch/arm/plat-orion/time.c +++ b/arch/arm/plat-orion/time.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include /* * Number of timer ticks per jiffy. -- cgit v1.2.2 From 15ca78f7925899fee7bc265651a69ab51f449eea Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 23 Apr 2009 21:11:06 -0600 Subject: OMAP2xxx clock: fix broken cpu_mask code Commit 8ad8ff6548f1c0bcbeaa02f274b3927c5015a921 breaks the OMAP2xxx cpu_mask code, which causes OMAP2xxx to panic on boot. Fix by removing the cpu_mask auto variable and by changing CK_242X and CK_243X to use RATE_IN_242X/RATE_IN_243X. Resolves <1>Unable to handle kernel NULL pointer dereference at virtual address 0000000c <1>pgd = c0004000 <1>[0000000c] *pgd=00000000 Internal error: Oops: 5 [#1] Modules linked in: CPU: 0 Not tainted (2.6.29-omap1 #32) PC is at omap2_clk_set_parent+0x104/0x120 LR is at omap2_clk_set_parent+0x28/0x120 Signed-off-by: Paul Walmsley Tested-by: Jarkko Nikula Cc: Russell King --- arch/arm/mach-omap2/clock24xx.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 984fb86349ba..5ea418327e89 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -60,8 +60,8 @@ struct omap_clk { }, \ } -#define CK_243X (1 << 0) -#define CK_242X (1 << 1) +#define CK_243X RATE_IN_243X +#define CK_242X RATE_IN_242X static struct omap_clk omap24xx_clks[] = { /* external root sources */ @@ -711,7 +711,7 @@ int __init omap2_clk_init(void) { struct prcm_config *prcm; struct omap_clk *c; - u32 clkrate, cpu_mask; + u32 clkrate; if (cpu_is_omap242x()) cpu_mask = RATE_IN_242X; @@ -728,12 +728,6 @@ int __init omap2_clk_init(void) sys_ck.rate = omap2_sys_clk_recalc(&sys_ck); propagate_rate(&sys_ck); - cpu_mask = 0; - if (cpu_is_omap2420()) - cpu_mask |= CK_242X; - if (cpu_is_omap2430()) - cpu_mask |= CK_243X; - for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) if (c->cpu & cpu_mask) { clkdev_add(&c->lk); -- cgit v1.2.2 From 9e53dd7180a1fd59a785dbfb9c633f01c96c388f Mon Sep 17 00:00:00 2001 From: Sergio Aguirre Date: Thu, 23 Apr 2009 21:11:07 -0600 Subject: OMAP3: clock: Camera module doesn't have IDLEST bit This patch avoids waiting for the camera module to become ready, since it doesn't have IDLEST bit. Based on a earlier hack done by Paul Walmsley on Sep 9 2008 on linux-omap tree. Signed-off-by: Sergio Aguirre Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clock34xx.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 70ec10deb654..f0090175d597 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -2052,7 +2052,7 @@ static struct clk dss_ick = { static struct clk cam_mclk = { .name = "cam_mclk", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &dpll4_m5x2_ck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_CAM_SHIFT, @@ -2063,7 +2063,7 @@ static struct clk cam_mclk = { static struct clk cam_ick = { /* Handles both L3 and L4 clocks */ .name = "cam_ick", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &l4_ick, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN), @@ -2074,7 +2074,7 @@ static struct clk cam_ick = { static struct clk csi2_96m_fck = { .name = "csi2_96m_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &core_96m_fck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), -- cgit v1.2.2 From d53eb73795c55101453ea6ca4f486ea2ff7b0496 Mon Sep 17 00:00:00 2001 From: Arun KS Date: Thu, 23 Apr 2009 21:11:07 -0600 Subject: OMAP1: clock: Typo fix for clock in omap1 Typo error when requesting for clock for dsp in omap1 Signed-off-by: Arun KS Signed-off-by: Paul Walmsley --- arch/arm/mach-omap1/mcbsp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index d040c3f1027f..a2d7814896be 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -40,8 +40,8 @@ static void omap1_mcbsp_request(unsigned int id) */ if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) { if (dsp_use++ == 0) { - api_clk = clk_get(NULL, "api_clk"); - dsp_clk = clk_get(NULL, "dsp_clk"); + api_clk = clk_get(NULL, "api_ck"); + dsp_clk = clk_get(NULL, "dsp_ck"); if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) { clk_enable(api_clk); clk_enable(dsp_clk); -- cgit v1.2.2 From 9198a40620fc69d577e854fb571e76af3313bc53 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 23 Apr 2009 21:11:08 -0600 Subject: OMAP3 GPTIMER: fix GPTIMER12 IRQ GPTIMER12 IRQ is at IRQ 95 on OMAP3, unlike OMAP2. (ref: OMAP34xx Multimedia High Security (HS) Device Silicon Revision 3.0 Security Addendum Rev. B, SWPU119B) Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dmtimer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index bfd47570cc91..c99d611242a9 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -238,7 +238,7 @@ static struct omap_dm_timer omap3_dm_timers[] = { { .phys_base = 0x49040000, .irq = INT_24XX_GPTIMER9 }, { .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 }, { .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 }, - { .phys_base = 0x48304000, .irq = INT_24XX_GPTIMER12 }, + { .phys_base = 0x48304000, .irq = INT_34XX_GPT12_IRQ }, }; static const char *omap3_dm_source_names[] __initdata = { -- cgit v1.2.2 From 219c5b98d5eb86c75abc716087f494fe06c6b64e Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 23 Apr 2009 21:11:08 -0600 Subject: OMAP: dmtimer: enable all timers to be wakeup events All GP timers on OMAP2/3 can generate wakeup events. The wakeup status is cleared in the PRCM interrupt handler. Signed-off-by: Kevin Hilman Signed-off-by: Paul Walmsley --- arch/arm/plat-omap/dmtimer.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index c99d611242a9..a05205c12f7b 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -321,11 +321,9 @@ static void omap_dm_timer_reset(struct omap_dm_timer *timer) l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */ /* - * Enable wake-up only for GPT1 on OMAP2 CPUs. - * FIXME: All timers should have wake-up enabled and clear - * PRCM status. + * Enable wake-up on OMAP2 CPUs. */ - if (cpu_class_is_omap2() && (timer == &dm_timers[0])) + if (cpu_class_is_omap2()) l |= 1 << 2; omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l); -- cgit v1.2.2 From f248076c0dad45b7e50f27096e1aac6a617665db Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 23 Apr 2009 21:11:10 -0600 Subject: OMAP2/3 GPTIMER: allow system tick GPTIMER to be changed in board-*.c files Add a function omap2_gp_clockevent_set_gptimer() for board-*.c files to use in .init_irq functions to configure the system tick GPTIMER. Practical choices at this point are GPTIMER1 or GPTIMER12. Both of these timers are in the WKUP powerdomain, and so are unaffected by chip power management. GPTIMER1 can use sys_clk as a source, for applications where a high-resolution timer is more important than power management. GPTIMER12 has the special property that it has the secure 32kHz oscillator as its source clock, which may be less prone to glitches than the off-chip 32kHz oscillator. But on HS devices, it may not be available for Linux use. It appears that most boards are fine with GPTIMER1, but BeagleBoard should use GPTIMER12 when using a 32KiHz timer source, due to hardware bugs in revisions B4 and below. Modify board-omap3beagle.c to use GPTIMER12. This patch originally used a Kbuild config option to select the GPTIMER, but was changed to allow this to be specified in board-*.c files, per Tony's request. Kalle Vallo found a bug in an earlier version of this patch - thanks Kalle. Tested on Beagle rev B4 ES2.1, with and without CONFIG_OMAP_32K_TIMER, and 3430SDP. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Cc: Kalle Valo --- arch/arm/mach-omap2/board-omap3beagle.c | 4 +++ arch/arm/mach-omap2/clock24xx.c | 1 + arch/arm/mach-omap2/clock24xx.h | 10 ++++++- arch/arm/mach-omap2/clock34xx.h | 1 - arch/arm/mach-omap2/timer-gp.c | 48 ++++++++++++++++++++++++++++-- arch/arm/plat-omap/dmtimer.c | 20 +++++++++---- arch/arm/plat-omap/include/mach/dmtimer.h | 2 +- arch/arm/plat-omap/include/mach/timer-gp.h | 17 +++++++++++ 8 files changed, 91 insertions(+), 12 deletions(-) create mode 100644 arch/arm/plat-omap/include/mach/timer-gp.h (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 744740ae1b9c..3a7a29d1f9a7 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -42,6 +42,7 @@ #include #include #include +#include #include "mmc-twl4030.h" @@ -186,6 +187,9 @@ static void __init omap3_beagle_init_irq(void) { omap2_init_common_hw(NULL); omap_init_irq(); +#ifdef CONFIG_OMAP_32K_TIMER + omap2_gp_clockevent_set_gptimer(12); +#endif omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 5ea418327e89..efc59c49341b 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -66,6 +66,7 @@ struct omap_clk { static struct omap_clk omap24xx_clks[] = { /* external root sources */ CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X), + CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X), CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X), CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X), CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X), diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h index 33c3e5b14323..88c5acb40fcf 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock24xx.h @@ -625,6 +625,14 @@ static struct clk func_32k_ck = { .clkdm_name = "wkup_clkdm", }; +static struct clk secure_32k_ck = { + .name = "secure_32k_ck", + .ops = &clkops_null, + .rate = 32768, + .flags = RATE_FIXED, + .clkdm_name = "wkup_clkdm", +}; + /* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */ static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */ .name = "osc_ck", @@ -1790,7 +1798,7 @@ static struct clk gpt12_ick = { static struct clk gpt12_fck = { .name = "gpt12_fck", .ops = &clkops_omap2_dflt_wait, - .parent = &func_32k_ck, + .parent = &secure_32k_ck, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT12_SHIFT, diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index f0090175d597..6763b8f73028 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -2901,7 +2901,6 @@ static struct clk sr_l4_ick = { /* SECURE_32K_FCK clocks */ -/* XXX This clock no longer exists in 3430 TRM rev F */ static struct clk gpt12_fck = { .name = "gpt12_fck", .ops = &clkops_null, diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index 9fc13a2cc3f4..7835048041eb 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -3,6 +3,8 @@ * * OMAP2 GP timer support. * + * Copyright (C) 2009 Nokia Corporation + * * Update to use new clocksource/clockevent layers * Author: Kevin Hilman, MontaVista Software, Inc. * Copyright (C) 2007 MontaVista Software, Inc. @@ -36,8 +38,13 @@ #include #include +/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ +#define MAX_GPTIMER_ID 12 + static struct omap_dm_timer *gptimer; static struct clock_event_device clockevent_gpt; +static u8 __initdata gptimer_id = 1; +static u8 __initdata inited; static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id) { @@ -95,20 +102,53 @@ static struct clock_event_device clockevent_gpt = { .set_mode = omap2_gp_timer_set_mode, }; +/** + * omap2_gp_clockevent_set_gptimer - set which GPTIMER is used for clockevents + * @id: GPTIMER to use (1..MAX_GPTIMER_ID) + * + * Define the GPTIMER that the system should use for the tick timer. + * Meant to be called from board-*.c files in the event that GPTIMER1, the + * default, is unsuitable. Returns -EINVAL on error or 0 on success. + */ +int __init omap2_gp_clockevent_set_gptimer(u8 id) +{ + if (id < 1 || id > MAX_GPTIMER_ID) + return -EINVAL; + + BUG_ON(inited); + + gptimer_id = id; + + return 0; +} + static void __init omap2_gp_clockevent_init(void) { u32 tick_rate; + int src; + + inited = 1; - gptimer = omap_dm_timer_request_specific(1); + gptimer = omap_dm_timer_request_specific(gptimer_id); BUG_ON(gptimer == NULL); #if defined(CONFIG_OMAP_32K_TIMER) - omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ); + src = OMAP_TIMER_SRC_32_KHZ; #else - omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK); + src = OMAP_TIMER_SRC_SYS_CLK; + WARN(gptimer_id == 12, "WARNING: GPTIMER12 can only use the " + "secure 32KiHz clock source\n"); #endif + + if (gptimer_id != 12) + WARN(IS_ERR_VALUE(omap_dm_timer_set_source(gptimer, src)), + "timer-gp: omap_dm_timer_set_source() failed\n"); + tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer)); + pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n", + gptimer_id, tick_rate); + omap2_gp_timer_irq.dev_id = (void *)gptimer; setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq); omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW); @@ -125,6 +165,8 @@ static void __init omap2_gp_clockevent_init(void) clockevents_register_device(&clockevent_gpt); } +/* Clocksource code */ + #ifdef CONFIG_OMAP_32K_TIMER /* * When 32k-timer is enabled, don't use GPTimer for clocksource diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index a05205c12f7b..55bb99631292 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -509,7 +509,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_stop); #ifdef CONFIG_ARCH_OMAP1 -void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) +int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) { int n = (timer - dm_timers) << 1; u32 l; @@ -517,23 +517,31 @@ void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n); l |= source << n; omap_writel(l, MOD_CONF_CTRL_1); + + return 0; } EXPORT_SYMBOL_GPL(omap_dm_timer_set_source); #else -void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) +int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) { + int ret = -EINVAL; + if (source < 0 || source >= 3) - return; + return -EINVAL; clk_disable(timer->fclk); - clk_set_parent(timer->fclk, dm_source_clocks[source]); + ret = clk_set_parent(timer->fclk, dm_source_clocks[source]); clk_enable(timer->fclk); - /* When the functional clock disappears, too quick writes seem to - * cause an abort. */ + /* + * When the functional clock disappears, too quick writes seem + * to cause an abort. XXX Is this still necessary? + */ __delay(150000); + + return ret; } EXPORT_SYMBOL_GPL(omap_dm_timer_set_source); diff --git a/arch/arm/plat-omap/include/mach/dmtimer.h b/arch/arm/plat-omap/include/mach/dmtimer.h index 6dc703138210..20f1054c0a80 100644 --- a/arch/arm/plat-omap/include/mach/dmtimer.h +++ b/arch/arm/plat-omap/include/mach/dmtimer.h @@ -64,7 +64,7 @@ void omap_dm_timer_trigger(struct omap_dm_timer *timer); void omap_dm_timer_start(struct omap_dm_timer *timer); void omap_dm_timer_stop(struct omap_dm_timer *timer); -void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source); +int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source); void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value); void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value); void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match); diff --git a/arch/arm/plat-omap/include/mach/timer-gp.h b/arch/arm/plat-omap/include/mach/timer-gp.h new file mode 100644 index 000000000000..c88d346b59d9 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/timer-gp.h @@ -0,0 +1,17 @@ +/* + * OMAP2/3 GPTIMER support.headers + * + * Copyright (C) 2009 Nokia Corporation + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H +#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H + +int __init omap2_gp_clockevent_set_gptimer(u8 id); + +#endif + -- cgit v1.2.2 From d2c8604121648b744ebb127991f1c5876931885e Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 23 Apr 2009 19:19:42 -0400 Subject: x86, hpet: Stop soliciting hpet=force users on ICH4M The HPET in the ICH4M is not documented in the data sheet because it was not officially validated. While it is fine for hackers to continue to use "hpet=force" to enable the hardware that they have, it is not prudent to solicit additional "hpet=force" users on this hardware. [ Impact: remove hpet=force syslog message on old-ICH systems ] Signed-off-by: Len Brown Acked-by: Venkatesh Pallipadi LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/kernel/quirks.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index e95022e4f5d5..7563b31b4f03 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -261,8 +261,6 @@ static void old_ich_force_enable_hpet_user(struct pci_dev *dev) { if (hpet_force_user) old_ich_force_enable_hpet(dev); - else - hpet_print_force_info(); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, -- cgit v1.2.2 From 644e28f3426810710b176080cc906995ebc24b63 Mon Sep 17 00:00:00 2001 From: Valentine Barshak Date: Thu, 23 Apr 2009 10:55:06 +0000 Subject: powerpc/44x: Correct memory size calculation for denali-based boards Some U-Boot versions incorrectly set the number of chipselects to two for Sequoia/Rainier boards while they only have one chipselect hardwired. This patch adds a workaround for this, hardcoding the number of chipselects to one for sequioa/rainer board models and reading the actual value from the memory controller register DDR0_10 otherwise. It also fixes another error in the way ibm4xx_denali_fixup_memsize calculates memory size. When testing the DDR_REDUC bit, the polarity is backwards. A "1" implies 32-bit wide memory while a "0" implies 64-bit wide memory. Signed-off-by: Mikhail Zolotaryov Signed-off-by: Valentine Barshak Signed-off-by: Steven A. Falco Acked-by: Stefan Roese Signed-off-by: Josh Boyer --- arch/powerpc/boot/4xx.c | 56 +++++++++++++++++++++++++++++++++++++------------ 1 file changed, 43 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c index 5c878436f348..325b310573b9 100644 --- a/arch/powerpc/boot/4xx.c +++ b/arch/powerpc/boot/4xx.c @@ -158,21 +158,33 @@ void ibm440spe_fixup_memsize(void) #define DDR_GET_VAL(val, mask, shift) (((val) >> (shift)) & (mask)) -void ibm4xx_denali_fixup_memsize(void) +/* + * Some U-Boot versions set the number of chipselects to two + * for Sequoia/Rainier boards while they only have one chipselect + * hardwired. Hardcode the number of chipselects to one + * for sequioa/rainer board models or read the actual value + * from the memory controller register DDR0_10 otherwise. + */ +static inline u32 ibm4xx_denali_get_cs(void) { - u32 val, max_cs, max_col, max_row; - u32 cs, col, row, bank, dpath; - unsigned long memsize; + void *devp; + char model[64]; + u32 val, cs; - val = SDRAM0_READ(DDR0_02); - if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT)) - fatal("DDR controller is not initialized\n"); + devp = finddevice("/"); + if (!devp) + goto read_cs; - /* get maximum cs col and row values */ - max_cs = DDR_GET_VAL(val, DDR_MAX_CS_REG, DDR_MAX_CS_REG_SHIFT); - max_col = DDR_GET_VAL(val, DDR_MAX_COL_REG, DDR_MAX_COL_REG_SHIFT); - max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT); + if (getprop(devp, "model", model, sizeof(model)) <= 0) + goto read_cs; + model[sizeof(model)-1] = 0; + + if (!strcmp(model, "amcc,sequoia") || + !strcmp(model, "amcc,rainier")) + return 1; + +read_cs: /* get CS value */ val = SDRAM0_READ(DDR0_10); @@ -183,7 +195,25 @@ void ibm4xx_denali_fixup_memsize(void) cs++; val = val >> 1; } + return cs; +} + +void ibm4xx_denali_fixup_memsize(void) +{ + u32 val, max_cs, max_col, max_row; + u32 cs, col, row, bank, dpath; + unsigned long memsize; + + val = SDRAM0_READ(DDR0_02); + if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT)) + fatal("DDR controller is not initialized\n"); + /* get maximum cs col and row values */ + max_cs = DDR_GET_VAL(val, DDR_MAX_CS_REG, DDR_MAX_CS_REG_SHIFT); + max_col = DDR_GET_VAL(val, DDR_MAX_COL_REG, DDR_MAX_COL_REG_SHIFT); + max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT); + + cs = ibm4xx_denali_get_cs(); if (!cs) fatal("No memory installed\n"); if (cs > max_cs) @@ -193,9 +223,9 @@ void ibm4xx_denali_fixup_memsize(void) val = SDRAM0_READ(DDR0_14); if (DDR_GET_VAL(val, DDR_REDUC, DDR_REDUC_SHIFT)) - dpath = 8; /* 64 bits */ - else dpath = 4; /* 32 bits */ + else + dpath = 8; /* 64 bits */ /* get address pins (rows) */ val = SDRAM0_READ(DDR0_42); -- cgit v1.2.2 From 596a5c4e43b08e90c0cd788861f859bf7ed6eddc Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 22 Apr 2009 12:10:07 +0100 Subject: MN10300: Update the ASB2303 defconfig Update the defconfig for the ASB2303 evaluation board. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/configs/asb2303_defconfig | 160 +++++++++++++++++++-------------- 1 file changed, 94 insertions(+), 66 deletions(-) (limited to 'arch') diff --git a/arch/mn10300/configs/asb2303_defconfig b/arch/mn10300/configs/asb2303_defconfig index 3aa8906b3dea..3acce23708b0 100644 --- a/arch/mn10300/configs/asb2303_defconfig +++ b/arch/mn10300/configs/asb2303_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Tue Feb 19 18:52:24 2008 +# Linux kernel version: 2.6.30-rc2 +# Sat Apr 18 11:13:22 2009 # CONFIG_MN10300=y CONFIG_AM33=y @@ -18,7 +18,6 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_BUG=y CONFIG_QUICKLIST=y CONFIG_ARCH_HAS_ILOG2_U32=y -# CONFIG_ARCH_SUPPORTS_AOUT is not set CONFIG_GENERIC_HARDIRQS=y # CONFIG_HOTPLUG_CPU is not set CONFIG_HZ=1000 @@ -40,52 +39,58 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set -# CONFIG_USER_SCHED is not set -# CONFIG_CGROUP_SCHED is not set -# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +CONFIG_STRIP_ASM_SYMS=y # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y # CONFIG_MARKERS is not set -CONFIG_OPROFILE=y -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_PROC_PAGE_MONITOR is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set # CONFIG_BLOCK is not set -CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set +# CONFIG_FREEZER is not set # # Matsushita MN10300 system setup @@ -107,7 +112,6 @@ CONFIG_INTERRUPT_VECTOR_BASE=0x90000000 CONFIG_KERNEL_TEXT_ADDRESS=0x90001000 CONFIG_KERNEL_ZIMAGE_BASE_ADDRESS=0x90700000 CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y CONFIG_MN10300_CURRENT_IN_E2=y CONFIG_MN10300_USING_JTAG=y CONFIG_MN10300_RTC=y @@ -135,13 +139,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=1 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # Power management options @@ -152,11 +158,9 @@ CONFIG_VIRT_TO_BUS=y # Executable formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -194,8 +198,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -203,6 +205,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -212,7 +215,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -223,14 +228,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -255,6 +254,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -297,9 +297,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x8000000 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_PLATRAM is not set # @@ -318,15 +316,24 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HAVE_IDE is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set # # SCSI device support @@ -334,7 +341,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -345,10 +352,15 @@ CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -358,6 +370,10 @@ CONFIG_SMC91X=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -382,6 +398,7 @@ CONFIG_SMC91X=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -403,6 +420,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -411,34 +429,43 @@ CONFIG_RTC=y # CONFIG_R3964 is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -453,21 +480,17 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -480,21 +503,24 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y @@ -506,19 +532,17 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_ROMFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -535,12 +559,16 @@ CONFIG_SUNRPC=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_SAMPLES is not set # @@ -548,26 +576,26 @@ CONFIG_MAGIC_SYSRQ=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y - -# -# Profiling support -# +CONFIG_NLATTR=y -- cgit v1.2.2 From 5876ee950f28612814cc4e01c5549718f8b79dce Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 26 Apr 2009 13:56:01 +0100 Subject: [ARM] lart: fix build error arch/arm/mach-sa1100/lart.c:36: error: 'PAGE_SHIFT' undeclared here (not in a function) Signed-off-by: Russell King --- arch/arm/mach-sa1100/lart.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index 0cd52692d2f7..1f940df0e5af 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include -- cgit v1.2.2 From 0ebdcb4d0480d1b8219cf5f9eab0fb5d889af0ad Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:10:57 -0400 Subject: xtensa: convert to use __HEAD and HEAD_TEXT macros. Signed-off-by: Tim Abbott Cc: Chris Zankel Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/xtensa/kernel/head.S | 3 ++- arch/xtensa/kernel/vmlinux.lds.S | 4 ++-- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S index 0817f9db836e..d9ddc1ba761c 100644 --- a/arch/xtensa/kernel/head.S +++ b/arch/xtensa/kernel/head.S @@ -19,6 +19,7 @@ #include #include +#include #include /* @@ -45,7 +46,7 @@ * instruction. */ - .section .head.text, "ax" + __HEAD .globl _start _start: _j 2f .align 4 diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S index c1be9a4a740c..5accf51053da 100644 --- a/arch/xtensa/kernel/vmlinux.lds.S +++ b/arch/xtensa/kernel/vmlinux.lds.S @@ -85,8 +85,8 @@ SECTIONS .text : { - /* The .head.text section must be the first section! */ - *(.head.text) + /* The HEAD_TEXT section must be the first section! */ + HEAD_TEXT *(.literal .text) VMLINUX_SYMBOL(__sched_text_start) = .; *(.sched.literal .sched.text) -- cgit v1.2.2 From 92ca52343ca503c1f957bd649df4ef914d5fc1e8 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:10:58 -0400 Subject: alpha: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott Cc: Richard Henderson Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/alpha/kernel/head.S | 3 ++- arch/alpha/kernel/vmlinux.lds.S | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/head.S b/arch/alpha/kernel/head.S index 7ac1f1372c36..4bdd1d2ff353 100644 --- a/arch/alpha/kernel/head.S +++ b/arch/alpha/kernel/head.S @@ -7,10 +7,11 @@ * the kernel global pointer and jump to the kernel entry-point. */ +#include #include #include -.section .text.head, "ax" +__HEAD .globl swapper_pg_dir .globl _stext swapper_pg_dir=SWAPPER_PGD diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S index ef37fc1acaea..b9d6568e5f7f 100644 --- a/arch/alpha/kernel/vmlinux.lds.S +++ b/arch/alpha/kernel/vmlinux.lds.S @@ -16,7 +16,7 @@ SECTIONS _text = .; /* Text and read-only data */ .text : { - *(.text.head) + HEAD_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT -- cgit v1.2.2 From b6a8d95c95814079ded93c14c4b394015d8b65cd Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:10:59 -0400 Subject: frv: convert frv to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott Cc: David Howells Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/frv/kernel/head.S | 3 ++- arch/frv/kernel/vmlinux.lds.S | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/frv/kernel/head.S b/arch/frv/kernel/head.S index fecf751c5cae..b825ef3f2d54 100644 --- a/arch/frv/kernel/head.S +++ b/arch/frv/kernel/head.S @@ -9,6 +9,7 @@ * 2 of the License, or (at your option) any later version. */ +#include #include #include #include @@ -27,7 +28,7 @@ # command line string # ############################################################################### - .section .text.head,"ax" + __HEAD .balign 4 .globl _boot, __head_reference diff --git a/arch/frv/kernel/vmlinux.lds.S b/arch/frv/kernel/vmlinux.lds.S index b95c4eace62f..22d9787406ed 100644 --- a/arch/frv/kernel/vmlinux.lds.S +++ b/arch/frv/kernel/vmlinux.lds.S @@ -26,7 +26,7 @@ SECTIONS _sinittext = .; .init.text : { - *(.text.head) + HEAD_TEXT #ifndef CONFIG_DEBUG_INFO INIT_TEXT EXIT_TEXT -- cgit v1.2.2 From 34963696629b6d1e0066a5f2e67993e409c9434b Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:11:02 -0400 Subject: m32r: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott Cc: Hirokazu Takata Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/m32r/kernel/head.S | 2 +- arch/m32r/kernel/vmlinux.lds.S | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/m32r/kernel/head.S b/arch/m32r/kernel/head.S index 90916067b9c1..0a7194439eb1 100644 --- a/arch/m32r/kernel/head.S +++ b/arch/m32r/kernel/head.S @@ -23,7 +23,7 @@ __INITDATA /* * References to members of the boot_cpu_data structure. */ -.section .text.head, "ax" +__HEAD .global start_kernel .global __bss_start .global _end diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S index 9db05df20c0e..4179adf6c624 100644 --- a/arch/m32r/kernel/vmlinux.lds.S +++ b/arch/m32r/kernel/vmlinux.lds.S @@ -27,7 +27,7 @@ SECTIONS _text = .; /* Text and read-only data */ .boot : { *(.boot) } = 0 .text : { - *(.text.head) + HEAD_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT -- cgit v1.2.2 From 6f335cab0431d5df4995bcd4fd952d4c746d5a86 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:11:03 -0400 Subject: m68k: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott Cc: Geert Uytterhoeven Cc: Roman Zippel Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/m68k/kernel/head.S | 2 +- arch/m68k/kernel/sun3-head.S | 2 +- arch/m68k/kernel/vmlinux-std.lds | 2 +- arch/m68k/kernel/vmlinux-sun3.lds | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S index f513f530de91..86edb5fbcfc3 100644 --- a/arch/m68k/kernel/head.S +++ b/arch/m68k/kernel/head.S @@ -577,7 +577,7 @@ func_define putn,1 #endif .endm -.section ".text.head","ax" +__HEAD ENTRY(_stext) /* * Version numbers of the bootinfo interface diff --git a/arch/m68k/kernel/sun3-head.S b/arch/m68k/kernel/sun3-head.S index aad01592dbbc..9e5c3e57c598 100644 --- a/arch/m68k/kernel/sun3-head.S +++ b/arch/m68k/kernel/sun3-head.S @@ -29,7 +29,7 @@ kernel_pmd_table: .skip 0x2000 .globl kernel_pg_dir .equ kernel_pg_dir,kernel_pmd_table - .section .text.head + __HEAD ENTRY(_stext) ENTRY(_start) diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds index f846d4e3e5e1..01d212bb05a6 100644 --- a/arch/m68k/kernel/vmlinux-std.lds +++ b/arch/m68k/kernel/vmlinux-std.lds @@ -12,7 +12,7 @@ SECTIONS . = 0x1000; _text = .; /* Text and read-only data */ .text : { - *(.text.head) + HEAD_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds index d9368c0709ba..c192f773db96 100644 --- a/arch/m68k/kernel/vmlinux-sun3.lds +++ b/arch/m68k/kernel/vmlinux-sun3.lds @@ -12,7 +12,7 @@ SECTIONS . = 0xE002000; _text = .; /* Text and read-only data */ .text : { - *(.text.head) + HEAD_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT -- cgit v1.2.2 From 9760f8fc60766f8fde0ef5cf7df714c2ce864ab6 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:11:04 -0400 Subject: mn10300: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott Cc: David Howells Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/head.S | 3 ++- arch/mn10300/kernel/vmlinux.lds.S | 5 +---- 2 files changed, 3 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/mn10300/kernel/head.S b/arch/mn10300/kernel/head.S index 8a8309fbe3c4..14f27f3bfaf4 100644 --- a/arch/mn10300/kernel/head.S +++ b/arch/mn10300/kernel/head.S @@ -9,6 +9,7 @@ * 2 of the Licence, or (at your option) any later version. */ +#include #include #include #include @@ -19,7 +20,7 @@ #include #include - .section .text.head,"ax" + __HEAD ############################################################################### # diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S index b8259668f7dc..24de6b90f401 100644 --- a/arch/mn10300/kernel/vmlinux.lds.S +++ b/arch/mn10300/kernel/vmlinux.lds.S @@ -27,10 +27,7 @@ SECTIONS _stext = .; _text = .; /* Text and read-only data */ .text : { - *( - .text.head - .text - ) + HEAD_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT -- cgit v1.2.2 From e70398458738fd26f96adc95eea8efe908809f08 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:11:05 -0400 Subject: powerpc: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott Cc: Benjamin Herrenschmidt Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/head_32.S | 3 ++- arch/powerpc/kernel/head_40x.S | 3 ++- arch/powerpc/kernel/head_44x.S | 3 ++- arch/powerpc/kernel/head_8xx.S | 3 ++- arch/powerpc/kernel/head_fsl_booke.S | 3 ++- arch/powerpc/kernel/vmlinux.lds.S | 2 +- 6 files changed, 11 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index 54e68c11ae15..c01467f952d3 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -21,6 +21,7 @@ * */ +#include #include #include #include @@ -50,7 +51,7 @@ mtspr SPRN_DBAT##n##L,RB; \ 1: - .section .text.head, "ax" + __HEAD .stabs "arch/powerpc/kernel/",N_SO,0,0,0f .stabs "head_32.S",N_SO,0,0,0f 0: diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S index 56d8e5d90c5b..0c96911d4299 100644 --- a/arch/powerpc/kernel/head_40x.S +++ b/arch/powerpc/kernel/head_40x.S @@ -31,6 +31,7 @@ * */ +#include #include #include #include @@ -52,7 +53,7 @@ * * This is all going to change RSN when we add bi_recs....... -- Dan */ - .section .text.head, "ax" + __HEAD _ENTRY(_stext); _ENTRY(_start); diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S index b56fecc93a16..18d8a1677c4d 100644 --- a/arch/powerpc/kernel/head_44x.S +++ b/arch/powerpc/kernel/head_44x.S @@ -28,6 +28,7 @@ * option) any later version. */ +#include #include #include #include @@ -50,7 +51,7 @@ * r7 - End of kernel command line string * */ - .section .text.head, "ax" + __HEAD _ENTRY(_stext); _ENTRY(_start); /* diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S index 3c9452d4308b..52ff8c53b93c 100644 --- a/arch/powerpc/kernel/head_8xx.S +++ b/arch/powerpc/kernel/head_8xx.S @@ -19,6 +19,7 @@ * */ +#include #include #include #include @@ -38,7 +39,7 @@ #else #define DO_8xx_CPU6(val, reg) #endif - .section .text.head, "ax" + __HEAD _ENTRY(_stext); _ENTRY(_start); diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 4c22620d009b..5bdcc06d294c 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -30,6 +30,7 @@ * option) any later version. */ +#include #include #include #include @@ -53,7 +54,7 @@ * r7 - End of kernel command line string * */ - .section .text.head, "ax" + __HEAD _ENTRY(_stext); _ENTRY(_start); /* diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index b9ef1644a722..d7425fffbc1c 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -52,7 +52,7 @@ SECTIONS /* Text and gots */ .text : AT(ADDR(.text) - LOAD_OFFSET) { ALIGN_FUNCTION(); - *(.text.head) + HEAD_TEXT _text = .; *(.text .fixup .text.init.refok .exit.text.refok __ftr_alt_*) SCHED_TEXT -- cgit v1.2.2 From 2133bb8d8c691c08d47f16d5971ba98f0ac241bf Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:11:06 -0400 Subject: s390: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott Cc: Martin Schwidefsky Cc: Heiko Carstens Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/s390/kernel/head.S | 3 ++- arch/s390/kernel/vmlinux.lds.S | 4 ++-- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index bba14494ee00..22596d70fc2e 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -23,6 +23,7 @@ * */ +#include #include #include #include @@ -35,7 +36,7 @@ #define ARCH_OFFSET 0 #endif -.section ".text.head","ax" +__HEAD #ifndef CONFIG_IPL .org 0 .long 0x00080000,0x80000000+startup # Just a restart PSW diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index 7a2063eb88f0..89399b8756c2 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -29,8 +29,8 @@ SECTIONS . = 0x00000000; .text : { _text = .; /* Text and read-only data */ - *(.text.head) - TEXT_TEXT + HEAD_TEXT + TEXT_TEXT SCHED_TEXT LOCK_TEXT KPROBES_TEXT -- cgit v1.2.2 From bbe215c231ac809e42b037345c1fa8e8eb09b00a Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:11:07 -0400 Subject: sh: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott Cc: Paul Mundt Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/sh/kernel/head_32.S | 3 ++- arch/sh/kernel/head_64.S | 5 ++++- arch/sh/kernel/vmlinux_32.lds.S | 2 +- arch/sh/kernel/vmlinux_64.lds.S | 2 +- 4 files changed, 8 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/head_32.S b/arch/sh/kernel/head_32.S index 788605ff7088..a78be74b8d3e 100644 --- a/arch/sh/kernel/head_32.S +++ b/arch/sh/kernel/head_32.S @@ -10,6 +10,7 @@ * * Head.S contains the SH exception handlers and startup code. */ +#include #include #include @@ -40,7 +41,7 @@ ENTRY(empty_zero_page) 1: .skip PAGE_SIZE - empty_zero_page - 1b - .section .text.head, "ax" + __HEAD /* * Condition at the entry of _stext: diff --git a/arch/sh/kernel/head_64.S b/arch/sh/kernel/head_64.S index 7ccfb995a398..3ea765844c74 100644 --- a/arch/sh/kernel/head_64.S +++ b/arch/sh/kernel/head_64.S @@ -8,6 +8,9 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ + +#include + #include #include #include @@ -110,7 +113,7 @@ empty_bad_pte_table: fpu_in_use: .quad 0 - .section .text.head, "ax" + __HEAD .balign L1_CACHE_BYTES /* * Condition at the entry of __stext: diff --git a/arch/sh/kernel/vmlinux_32.lds.S b/arch/sh/kernel/vmlinux_32.lds.S index d0b2a715cd14..dd9b2ee1312d 100644 --- a/arch/sh/kernel/vmlinux_32.lds.S +++ b/arch/sh/kernel/vmlinux_32.lds.S @@ -31,7 +31,7 @@ SECTIONS } = 0 .text : { - *(.text.head) + HEAD_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT diff --git a/arch/sh/kernel/vmlinux_64.lds.S b/arch/sh/kernel/vmlinux_64.lds.S index 33fa46451406..69664460c688 100644 --- a/arch/sh/kernel/vmlinux_64.lds.S +++ b/arch/sh/kernel/vmlinux_64.lds.S @@ -42,7 +42,7 @@ SECTIONS } = 0 .text : C_PHYS(.text) { - *(.text.head) + HEAD_TEXT TEXT_TEXT *(.text64) *(.text..SHmedia32) -- cgit v1.2.2 From ce8a7424d23a36f043d0de8484f888971c831119 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:11:08 -0400 Subject: sparc: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott Cc: David S. Miller Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/sparc/kernel/head_32.S | 2 +- arch/sparc/kernel/vmlinux.lds.S | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/head_32.S b/arch/sparc/kernel/head_32.S index f0b4b516304f..e91f01a57598 100644 --- a/arch/sparc/kernel/head_32.S +++ b/arch/sparc/kernel/head_32.S @@ -72,7 +72,7 @@ sun4e_notsup: .align 4 /* The Sparc trap table, bootloader gives us control at _start. */ - .section .text.head,"ax" + __HEAD .globl start, _stext, _start, __stext .globl trapbase _start: /* danger danger */ diff --git a/arch/sparc/kernel/vmlinux.lds.S b/arch/sparc/kernel/vmlinux.lds.S index 76267085b13b..fcbbd000ec08 100644 --- a/arch/sparc/kernel/vmlinux.lds.S +++ b/arch/sparc/kernel/vmlinux.lds.S @@ -41,7 +41,7 @@ SECTIONS .text TEXTSTART : { _text = .; - *(.text.head) + HEAD_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT -- cgit v1.2.2 From 40f4a6d522e68a0203ebefb57f3cbdac4a622169 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 22 Apr 2009 10:50:19 +0000 Subject: sh: sh7785lcr: fix defconfig for 29-bit mode Fix the problem that cannot work 29-bit mode when use sh7785lcr_defconfig. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- arch/sh/configs/sh7785lcr_defconfig | 57 ++++++++++++++++++++++++------------- 1 file changed, 37 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig index 8a42bbef1f50..e4fac2efc055 100644 --- a/arch/sh/configs/sh7785lcr_defconfig +++ b/arch/sh/configs/sh7785lcr_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 19:15:58 2009 +# Linux kernel version: 2.6.30-rc2 +# Wed Apr 22 19:17:56 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -79,6 +80,7 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -98,6 +100,7 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y +# CONFIG_MARKERS is not set # CONFIG_OPROFILE is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set @@ -106,6 +109,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -118,7 +123,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -166,6 +170,7 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -175,8 +180,6 @@ CONFIG_CPU_SUBTYPE_SH7785=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -186,38 +189,31 @@ CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x08000000 -# CONFIG_29BIT is not set -CONFIG_32BIT=y -CONFIG_PMB_ENABLE=y -# CONFIG_PMB is not set -CONFIG_PMB_FIXED=y +CONFIG_29BIT=y +# CONFIG_PMB_ENABLE is not set # CONFIG_X2TLB is not set CONFIG_VSYSCALL=y # CONFIG_NUMA is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y -CONFIG_MAX_ACTIVE_REGIONS=2 +CONFIG_MAX_ACTIVE_REGIONS=1 CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set +CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set -CONFIG_SPARSEMEM_MANUAL=y -CONFIG_SPARSEMEM=y -CONFIG_HAVE_MEMORY_PRESENT=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y -# CONFIG_MEMORY_HOTPLUG is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -249,6 +245,7 @@ CONFIG_CPU_HAS_FPU=y # # CONFIG_SH_HIGHLANDER is not set CONFIG_SH_SH7785LCR=y +CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS=y # # Timer and clock configuration @@ -672,6 +669,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -1009,15 +1007,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1218,6 +1218,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1239,6 +1240,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1289,6 +1295,7 @@ CONFIG_MINIX_FS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1377,6 +1384,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1413,6 +1423,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1422,9 +1433,14 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1542,6 +1558,7 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines -- cgit v1.2.2 From a8f6faebaf5b3f0f56b7c12a4f99d97c56938b37 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 21 Apr 2009 14:39:07 +0800 Subject: [ARM] pxa: fix issue of muxed GPIO irq_chip functions touching non-muxed GPIOs pxa_gpio_irq_type() and pxa_unmask_muxed_gpio() will touch non-muxed GPIOs (0 and 1 on PXA2xx/PXA3xx) bits in GRERx and GFERx, which is incorrect. Actually, only those bits should get updated if the corresponding bits are set in c->irq_mask as well. Fix this by updating only those relevant bits. Reported-and-tested-by: Daniel Ribeiro Signed-off-by: Eric Miao --- arch/arm/plat-pxa/gpio.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c index af819bf21b63..abc79d44acaa 100644 --- a/arch/arm/plat-pxa/gpio.c +++ b/arch/arm/plat-pxa/gpio.c @@ -121,6 +121,8 @@ static int __init pxa_init_gpio_chip(int gpio_end) return -ENOMEM; } + memset(chips, 0, nbanks * sizeof(struct pxa_gpio_chip)); + for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) { struct gpio_chip *c = &chips[i].chip; @@ -143,6 +145,21 @@ static int __init pxa_init_gpio_chip(int gpio_end) return 0; } +/* Update only those GRERx and GFERx edge detection register bits if those + * bits are set in c->irq_mask + */ +static inline void update_edge_detect(struct pxa_gpio_chip *c) +{ + uint32_t grer, gfer; + + grer = __raw_readl(c->regbase + GRER_OFFSET) & ~c->irq_mask; + gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~c->irq_mask; + grer |= c->irq_edge_rise & c->irq_mask; + gfer |= c->irq_edge_fall & c->irq_mask; + __raw_writel(grer, c->regbase + GRER_OFFSET); + __raw_writel(gfer, c->regbase + GFER_OFFSET); +} + static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) { struct pxa_gpio_chip *c; @@ -181,8 +198,7 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) else c->irq_edge_fall &= ~mask; - __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET); - __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET); + update_edge_detect(c); pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio, ((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""), @@ -244,8 +260,7 @@ static void pxa_unmask_muxed_gpio(unsigned int irq) struct pxa_gpio_chip *c = gpio_to_chip(gpio); c->irq_mask |= GPIO_bit(gpio); - __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET); - __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET); + update_edge_detect(c); } static struct irq_chip pxa_muxed_gpio_chip = { -- cgit v1.2.2 From fd87e081723089cba99df0b3d6f36ae2235c700a Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 16 Apr 2009 11:23:08 +0200 Subject: [ARM] pxa: remove duplicate select statements from Kconfig ARCH_PXA selects HAVE_CLK and COMMON_CLKDEV twice in arch/arm/Kconfig. Remove the second entry. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Eric Miao --- arch/arm/Kconfig | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e02b893fb909..9909a93ec7fd 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -486,8 +486,6 @@ config ARCH_PXA select HAVE_CLK select COMMON_CLKDEV select ARCH_REQUIRE_GPIOLIB - select HAVE_CLK - select COMMON_CLKDEV select GENERIC_TIME select GENERIC_CLOCKEVENTS select TICK_ONESHOT -- cgit v1.2.2 From 36b5437f33fb95196bef2345dede39fdcab3e431 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Fri, 17 Apr 2009 11:37:10 +0200 Subject: [ARM] pxa: remove unused CPU_FREQ_PXA Kconfig symbol cpufreq drivers for pxa2xx/3xx are now built-in automatically as soon as CPU_FREQ is enabled. Signed-off-by: Philipp Zabel Signed-off-by: Eric Miao --- arch/arm/Kconfig | 6 ------ arch/arm/configs/viper_defconfig | 1 - 2 files changed, 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9909a93ec7fd..fb667cd43f70 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1169,12 +1169,6 @@ config CPU_FREQ_IMX If in doubt, say N. -config CPU_FREQ_PXA - bool - depends on CPU_FREQ && ARCH_PXA && PXA25x - default y - select CPU_FREQ_DEFAULT_GOV_USERSPACE - endif source "drivers/cpuidle/Kconfig" diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig index 30f463d2fa8a..6ab5dd5868de 100644 --- a/arch/arm/configs/viper_defconfig +++ b/arch/arm/configs/viper_defconfig @@ -298,7 +298,6 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m -CONFIG_CPU_FREQ_PXA=y # # Floating point emulation -- cgit v1.2.2 From 3e36c0deea118e277f4ff9fa947bcde5f88426ca Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Fri, 6 Feb 2009 16:49:23 +0800 Subject: [ARM] pxa: make ads7846 on corgi and spitz to sync on HSYNC Signed-off-by: Eric Miao --- arch/arm/mach-pxa/corgi.c | 10 ++++++++++ arch/arm/mach-pxa/spitz.c | 10 ++++++++++ 2 files changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index cdf21dd135b4..930e364ccde9 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -427,12 +427,22 @@ static struct pxa2xx_spi_master corgi_spi_info = { .num_chipselect = 3, }; +static void corgi_wait_for_hsync(void) +{ + while (gpio_get_value(CORGI_GPIO_HSYNC)) + cpu_relax(); + + while (!gpio_get_value(CORGI_GPIO_HSYNC)) + cpu_relax(); +} + static struct ads7846_platform_data corgi_ads7846_info = { .model = 7846, .vref_delay_usecs = 100, .x_plate_ohms = 419, .y_plate_ohms = 486, .gpio_pendown = CORGI_GPIO_TP_INT, + .wait_for_sync = corgi_wait_for_hsync, }; static void corgi_ads7846_cs(u32 command) diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 8c61ddac119e..c18e34acafcb 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -299,12 +299,22 @@ static struct pxa2xx_spi_master spitz_spi_info = { .num_chipselect = 3, }; +static void spitz_wait_for_hsync(void) +{ + while (gpio_get_value(SPITZ_GPIO_HSYNC)) + cpu_relax(); + + while (!gpio_get_value(SPITZ_GPIO_HSYNC)) + cpu_relax(); +} + static struct ads7846_platform_data spitz_ads7846_info = { .model = 7846, .vref_delay_usecs = 100, .x_plate_ohms = 419, .y_plate_ohms = 486, .gpio_pendown = SPITZ_GPIO_TP_INT, + .wait_for_sync = spitz_wait_for_hsync, }; static void spitz_ads7846_cs(u32 command) -- cgit v1.2.2 From 15fbc938576175eeb53798221f045d4ace52e5dc Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 22 Apr 2009 18:34:36 +0800 Subject: [ARM] pxa/zylonite: fix the issue of unused SDATA_IN_1 pin get AC97 not working GPIO17_SDATA_IN_1 and GPIO36_SDATA_IN_1 are originally designed for the 2nd codec but unused on the board, yet they are initialized incorrectly by the bootloader as the SDATA_IN_1 alternate function, thus causing AC97 fail to work. Fix this issue by configuring these pins as normal GPIO to avoid the noise from these pins being treated as signals from the 2nd codec. Signed-off-by: Eric Miao --- arch/arm/mach-pxa/zylonite_pxa300.c | 1 + arch/arm/mach-pxa/zylonite_pxa320.c | 1 + 2 files changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index c1f73205d078..e99555b76a08 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -72,6 +72,7 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = { GPIO25_AC97_SDATA_IN_0, GPIO27_AC97_SDATA_OUT, GPIO28_AC97_SYNC, + GPIO17_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */ /* SSP3 */ GPIO91_SSP3_SCLK, diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c index 4e1c488c6906..cc5a22833605 100644 --- a/arch/arm/mach-pxa/zylonite_pxa320.c +++ b/arch/arm/mach-pxa/zylonite_pxa320.c @@ -68,6 +68,7 @@ static mfp_cfg_t mfp_cfg[] __initdata = { GPIO38_AC97_SYNC, GPIO39_AC97_BITCLK, GPIO40_AC97_nACRESET, + GPIO36_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */ /* SSP3 */ GPIO89_SSP3_SCLK, -- cgit v1.2.2 From b49e385fc7cb4e6ed4206dfdab2b2579c5076120 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 22 Apr 2009 18:38:40 +0800 Subject: [ARM] pxa/zylonite: configure GPIO18/19 correctly, used by 2 GPIO expanders Signed-off-by: Eric Miao --- arch/arm/mach-pxa/zylonite_pxa300.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index e99555b76a08..c256c57642c0 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -127,6 +127,10 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = { /* Standard I2C */ GPIO21_I2C_SCL, GPIO22_I2C_SDA, + + /* GPIO */ + GPIO18_GPIO, /* GPIO Expander #0 INT_N */ + GPIO19_GPIO, /* GPIO Expander #1 INT_N */ }; static mfp_cfg_t pxa300_mfp_cfg[] __initdata = { -- cgit v1.2.2 From fc76132b1e72efe45b5a5a693caadd54c3037f55 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Mon, 13 Apr 2009 11:06:49 +0800 Subject: [ARM] pxa/littleton: add missing da9034 touchscreen support Signed-off-by: Eric Miao --- arch/arm/mach-pxa/littleton.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index e13f6a81c223..c872b9feb4d4 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -334,6 +334,11 @@ static struct led_info littleton_da9034_leds[] = { }, }; +static struct da9034_touch_pdata littleton_da9034_touch = { + .x_inverted = 1, + .interval_ms = 20, +}; + static struct da903x_subdev_info littleton_da9034_subdevs[] = { { .name = "da903x-led", @@ -350,6 +355,10 @@ static struct da903x_subdev_info littleton_da9034_subdevs[] = { }, { .name = "da903x-backlight", .id = DA9034_ID_WLED, + }, { + .name = "da9034-touch", + .id = DA9034_ID_TOUCH, + .platform_data = &littleton_da9034_touch, }, }; -- cgit v1.2.2 From ecd4ca52bfdb4108f47aa480781b97f037051a72 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 27 Apr 2009 17:05:38 +0900 Subject: sh: Fix up unsigned syscall_nr in SH-5 pt_regs. syscall_nr is presently defined as unsigned in the SH-5 pt_regs, while the syscall restarting code wants it to be signed. Fix this up, and bring it in line with the other SH parts. Reported-by: Roel Kluin Signed-off-by: Paul Mundt --- arch/sh/include/asm/ptrace.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h index d3f6caa936b0..68e20ff9aa9b 100644 --- a/arch/sh/include/asm/ptrace.h +++ b/arch/sh/include/asm/ptrace.h @@ -9,7 +9,7 @@ struct pt_regs { unsigned long long pc; unsigned long long sr; - unsigned long long syscall_nr; + long long syscall_nr; unsigned long long regs[63]; unsigned long long tregs[8]; unsigned long long pad[2]; -- cgit v1.2.2 From e37469f68a15feb40ee9f6325d1e1793f90afe39 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 27 Apr 2009 11:55:17 +0100 Subject: FRV: Wire up new syscalls Wire up new system calls for the FRV arch (preadv and pwritev). Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/frv/include/asm/unistd.h | 4 +++- arch/frv/kernel/entry.S | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h index edcfaf5f0414..96d78d5d2c41 100644 --- a/arch/frv/include/asm/unistd.h +++ b/arch/frv/include/asm/unistd.h @@ -339,10 +339,12 @@ #define __NR_dup3 330 #define __NR_pipe2 331 #define __NR_inotify_init1 332 +#define __NR_preadv 333 +#define __NR_pwritev 334 #ifdef __KERNEL__ -#define NR_syscalls 333 +#define NR_syscalls 335 #define __ARCH_WANT_IPC_PARSE_VERSION /* #define __ARCH_WANT_OLD_READDIR */ diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S index 99060ab507ee..1da523b3298e 100644 --- a/arch/frv/kernel/entry.S +++ b/arch/frv/kernel/entry.S @@ -1525,5 +1525,7 @@ sys_call_table: .long sys_dup3 /* 330 */ .long sys_pipe2 .long sys_inotify_init1 + .long sys_preadv + .long sys_pwritev syscall_table_size = (. - sys_call_table) -- cgit v1.2.2 From 9a523d427dc5908a79ce3ff742e9606e852802d6 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 27 Apr 2009 11:55:23 +0100 Subject: FRV: Stop gcc from generating uninitialised variable warnings after BUG() Stop gcc from generating uninitialised variable warnings after BUG(). The problem is that FRV's call into its gdbstub appears to return (if the function is marked noreturn, then the compiler is under no obligation to pass it a return address, and so GDB won't know where the bug happened). To get around this, we make the do...while wrapper in _debug_bug_trap() an endless loop from which there's no escape. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/frv/include/asm/bug.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/frv/include/asm/bug.h b/arch/frv/include/asm/bug.h index 6b1b44d71028..2e054508a2f6 100644 --- a/arch/frv/include/asm/bug.h +++ b/arch/frv/include/asm/bug.h @@ -30,7 +30,7 @@ extern void __debug_bug_printk(const char *file, unsigned line); do { \ __debug_bug_trap(signr); \ asm volatile("nop"); \ -} while(0) +} while(1) #define HAVE_ARCH_BUG #define BUG() \ @@ -46,7 +46,8 @@ do { \ #define HAVE_ARCH_KGDB_BAD_PAGE #define kgdb_bad_page(page) do { kgdb_raise(SIGABRT); } while(0) #endif -#endif + +#endif /* CONFIG_BUG */ #include -- cgit v1.2.2 From e60990023cac11bc6185e7a7f1007fbbb8d30e4d Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 14 Apr 2009 07:06:37 -0500 Subject: davinci: timers: use clk_get_rate() Use clock framework instead of hard-coded CLOCK_TICK_RATE for determining timer tick frequencies. Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/time.c | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 88864ae067b8..494e01bff5c3 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -31,6 +31,7 @@ #include "clock.h" static struct clock_event_device clockevent_davinci; +static unsigned int davinci_clock_tick_rate; #define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400) #define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800) @@ -282,7 +283,7 @@ static void davinci_set_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - t->period = CLOCK_TICK_RATE / (HZ); + t->period = davinci_clock_tick_rate / (HZ); t->opts = TIMER_OPTS_PERIODIC; timer32_config(t); break; @@ -309,21 +310,29 @@ static struct clock_event_device clockevent_davinci = { static void __init davinci_timer_init(void) { + struct clk *timer_clk; + static char err[] __initdata = KERN_ERR "%s: can't register clocksource!\n"; /* init timer hw */ timer_init(); + timer_clk = clk_get(NULL, "timer0"); + BUG_ON(IS_ERR(timer_clk)); + clk_enable(timer_clk); + + davinci_clock_tick_rate = clk_get_rate(timer_clk); + /* setup clocksource */ clocksource_davinci.mult = - clocksource_khz2mult(CLOCK_TICK_RATE/1000, + clocksource_khz2mult(davinci_clock_tick_rate/1000, clocksource_davinci.shift); if (clocksource_register(&clocksource_davinci)) printk(err, clocksource_davinci.name); /* setup clockevent */ - clockevent_davinci.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, + clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC, clockevent_davinci.shift); clockevent_davinci.max_delta_ns = clockevent_delta2ns(0xfffffffe, &clockevent_davinci); @@ -343,6 +352,15 @@ struct sys_timer davinci_timer = { void davinci_watchdog_reset(void) { u32 tgcr, wdtcr; void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE); + struct device dev; + struct clk *wd_clk; + char *name = "watchdog"; + + dev_set_name(&dev, name); + wd_clk = clk_get(&dev, NULL); + if (WARN_ON(IS_ERR(wd_clk))) + return; + clk_enable(wd_clk); /* disable, internal clock source */ __raw_writel(0, base + TCR); -- cgit v1.2.2 From a4768d2275cb7c0d2a665b9ad4de07834be0714b Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 14 Apr 2009 07:18:14 -0500 Subject: davinci: add EDMA driver Original code for 2.6.10 and 2.6.28 series done by Texas Instruments and MontaVista, but major updates and rework done by Troy Kisky and David Brownell. Cc: Sergei Shtylyov Cc: Sudhakar Rajashekhara Cc: Troy Kisky Cc: David Brownell Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/Makefile | 2 +- arch/arm/mach-davinci/dma.c | 1135 +++++++++++++++++++++++++++++ arch/arm/mach-davinci/include/mach/edma.h | 228 ++++++ 3 files changed, 1364 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-davinci/dma.c create mode 100644 arch/arm/mach-davinci/include/mach/edma.h (limited to 'arch') diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 4dc458597f40..3ee3d73d9566 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -5,7 +5,7 @@ # Common objects obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \ - gpio.o mux.o devices.o usb.o + gpio.o mux.o devices.o dma.o usb.o # Board specific obj-$(CONFIG_MACH_DAVINCI_EVM) += board-evm.o diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c new file mode 100644 index 000000000000..15e9eb158bb7 --- /dev/null +++ b/arch/arm/mach-davinci/dma.c @@ -0,0 +1,1135 @@ +/* + * EDMA3 support for DaVinci + * + * Copyright (C) 2006-2009 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + + +/* Offsets matching "struct edmacc_param" */ +#define PARM_OPT 0x00 +#define PARM_SRC 0x04 +#define PARM_A_B_CNT 0x08 +#define PARM_DST 0x0c +#define PARM_SRC_DST_BIDX 0x10 +#define PARM_LINK_BCNTRLD 0x14 +#define PARM_SRC_DST_CIDX 0x18 +#define PARM_CCNT 0x1c + +#define PARM_SIZE 0x20 + +/* Offsets for EDMA CC global channel registers and their shadows */ +#define SH_ER 0x00 /* 64 bits */ +#define SH_ECR 0x08 /* 64 bits */ +#define SH_ESR 0x10 /* 64 bits */ +#define SH_CER 0x18 /* 64 bits */ +#define SH_EER 0x20 /* 64 bits */ +#define SH_EECR 0x28 /* 64 bits */ +#define SH_EESR 0x30 /* 64 bits */ +#define SH_SER 0x38 /* 64 bits */ +#define SH_SECR 0x40 /* 64 bits */ +#define SH_IER 0x50 /* 64 bits */ +#define SH_IECR 0x58 /* 64 bits */ +#define SH_IESR 0x60 /* 64 bits */ +#define SH_IPR 0x68 /* 64 bits */ +#define SH_ICR 0x70 /* 64 bits */ +#define SH_IEVAL 0x78 +#define SH_QER 0x80 +#define SH_QEER 0x84 +#define SH_QEECR 0x88 +#define SH_QEESR 0x8c +#define SH_QSER 0x90 +#define SH_QSECR 0x94 +#define SH_SIZE 0x200 + +/* Offsets for EDMA CC global registers */ +#define EDMA_REV 0x0000 +#define EDMA_CCCFG 0x0004 +#define EDMA_QCHMAP 0x0200 /* 8 registers */ +#define EDMA_DMAQNUM 0x0240 /* 8 registers (4 on OMAP-L1xx) */ +#define EDMA_QDMAQNUM 0x0260 +#define EDMA_QUETCMAP 0x0280 +#define EDMA_QUEPRI 0x0284 +#define EDMA_EMR 0x0300 /* 64 bits */ +#define EDMA_EMCR 0x0308 /* 64 bits */ +#define EDMA_QEMR 0x0310 +#define EDMA_QEMCR 0x0314 +#define EDMA_CCERR 0x0318 +#define EDMA_CCERRCLR 0x031c +#define EDMA_EEVAL 0x0320 +#define EDMA_DRAE 0x0340 /* 4 x 64 bits*/ +#define EDMA_QRAE 0x0380 /* 4 registers */ +#define EDMA_QUEEVTENTRY 0x0400 /* 2 x 16 registers */ +#define EDMA_QSTAT 0x0600 /* 2 registers */ +#define EDMA_QWMTHRA 0x0620 +#define EDMA_QWMTHRB 0x0624 +#define EDMA_CCSTAT 0x0640 + +#define EDMA_M 0x1000 /* global channel registers */ +#define EDMA_ECR 0x1008 +#define EDMA_ECRH 0x100C +#define EDMA_SHADOW0 0x2000 /* 4 regions shadowing global channels */ +#define EDMA_PARM 0x4000 /* 128 param entries */ + +#define DAVINCI_DMA_3PCC_BASE 0x01C00000 + +#define PARM_OFFSET(param_no) (EDMA_PARM + ((param_no) << 5)) + +#define EDMA_MAX_DMACH 64 +#define EDMA_MAX_PARAMENTRY 512 +#define EDMA_MAX_EVQUE 2 /* FIXME too small */ + + +/*****************************************************************************/ + +static void __iomem *edmacc_regs_base; + +static inline unsigned int edma_read(int offset) +{ + return (unsigned int)__raw_readl(edmacc_regs_base + offset); +} + +static inline void edma_write(int offset, int val) +{ + __raw_writel(val, edmacc_regs_base + offset); +} +static inline void edma_modify(int offset, unsigned and, unsigned or) +{ + unsigned val = edma_read(offset); + val &= and; + val |= or; + edma_write(offset, val); +} +static inline void edma_and(int offset, unsigned and) +{ + unsigned val = edma_read(offset); + val &= and; + edma_write(offset, val); +} +static inline void edma_or(int offset, unsigned or) +{ + unsigned val = edma_read(offset); + val |= or; + edma_write(offset, val); +} +static inline unsigned int edma_read_array(int offset, int i) +{ + return edma_read(offset + (i << 2)); +} +static inline void edma_write_array(int offset, int i, unsigned val) +{ + edma_write(offset + (i << 2), val); +} +static inline void edma_modify_array(int offset, int i, + unsigned and, unsigned or) +{ + edma_modify(offset + (i << 2), and, or); +} +static inline void edma_or_array(int offset, int i, unsigned or) +{ + edma_or(offset + (i << 2), or); +} +static inline void edma_or_array2(int offset, int i, int j, unsigned or) +{ + edma_or(offset + ((i*2 + j) << 2), or); +} +static inline void edma_write_array2(int offset, int i, int j, unsigned val) +{ + edma_write(offset + ((i*2 + j) << 2), val); +} +static inline unsigned int edma_shadow0_read(int offset) +{ + return edma_read(EDMA_SHADOW0 + offset); +} +static inline unsigned int edma_shadow0_read_array(int offset, int i) +{ + return edma_read(EDMA_SHADOW0 + offset + (i << 2)); +} +static inline void edma_shadow0_write(int offset, unsigned val) +{ + edma_write(EDMA_SHADOW0 + offset, val); +} +static inline void edma_shadow0_write_array(int offset, int i, unsigned val) +{ + edma_write(EDMA_SHADOW0 + offset + (i << 2), val); +} +static inline unsigned int edma_parm_read(int offset, int param_no) +{ + return edma_read(EDMA_PARM + offset + (param_no << 5)); +} +static inline void edma_parm_write(int offset, int param_no, unsigned val) +{ + edma_write(EDMA_PARM + offset + (param_no << 5), val); +} +static inline void edma_parm_modify(int offset, int param_no, + unsigned and, unsigned or) +{ + edma_modify(EDMA_PARM + offset + (param_no << 5), and, or); +} +static inline void edma_parm_and(int offset, int param_no, unsigned and) +{ + edma_and(EDMA_PARM + offset + (param_no << 5), and); +} +static inline void edma_parm_or(int offset, int param_no, unsigned or) +{ + edma_or(EDMA_PARM + offset + (param_no << 5), or); +} + +/*****************************************************************************/ + +/* actual number of DMA channels and slots on this silicon */ +static unsigned num_channels; +static unsigned num_slots; + +static struct dma_interrupt_data { + void (*callback)(unsigned channel, unsigned short ch_status, + void *data); + void *data; +} intr_data[EDMA_MAX_DMACH]; + +/* The edma_inuse bit for each PaRAM slot is clear unless the + * channel is in use ... by ARM or DSP, for QDMA, or whatever. + */ +static DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY); + +/* The edma_noevent bit for each channel is clear unless + * it doesn't trigger DMA events on this platform. It uses a + * bit of SOC-specific initialization code. + */ +static DECLARE_BITMAP(edma_noevent, EDMA_MAX_DMACH); + +/* dummy param set used to (re)initialize parameter RAM slots */ +static const struct edmacc_param dummy_paramset = { + .link_bcntrld = 0xffff, + .ccnt = 1, +}; + +static const int __initconst +queue_tc_mapping[EDMA_MAX_EVQUE + 1][2] = { +/* {event queue no, TC no} */ + {0, 0}, + {1, 1}, + {-1, -1} +}; + +static const int __initconst +queue_priority_mapping[EDMA_MAX_EVQUE + 1][2] = { + /* {event queue no, Priority} */ + {0, 3}, + {1, 7}, + {-1, -1} +}; + +/*****************************************************************************/ + +static void map_dmach_queue(unsigned ch_no, enum dma_event_q queue_no) +{ + int bit = (ch_no & 0x7) * 4; + + /* default to low priority queue */ + if (queue_no == EVENTQ_DEFAULT) + queue_no = EVENTQ_1; + + queue_no &= 7; + edma_modify_array(EDMA_DMAQNUM, (ch_no >> 3), + ~(0x7 << bit), queue_no << bit); +} + +static void __init map_queue_tc(int queue_no, int tc_no) +{ + int bit = queue_no * 4; + edma_modify(EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit)); +} + +static void __init assign_priority_to_queue(int queue_no, int priority) +{ + int bit = queue_no * 4; + edma_modify(EDMA_QUEPRI, ~(0x7 << bit), ((priority & 0x7) << bit)); +} + +static inline void +setup_dma_interrupt(unsigned lch, + void (*callback)(unsigned channel, u16 ch_status, void *data), + void *data) +{ + if (!callback) { + edma_shadow0_write_array(SH_IECR, lch >> 5, + (1 << (lch & 0x1f))); + } + + intr_data[lch].callback = callback; + intr_data[lch].data = data; + + if (callback) { + edma_shadow0_write_array(SH_ICR, lch >> 5, + (1 << (lch & 0x1f))); + edma_shadow0_write_array(SH_IESR, lch >> 5, + (1 << (lch & 0x1f))); + } +} + +/****************************************************************************** + * + * DMA interrupt handler + * + *****************************************************************************/ +static irqreturn_t dma_irq_handler(int irq, void *data) +{ + int i; + unsigned int cnt = 0; + + dev_dbg(data, "dma_irq_handler\n"); + + if ((edma_shadow0_read_array(SH_IPR, 0) == 0) + && (edma_shadow0_read_array(SH_IPR, 1) == 0)) + return IRQ_NONE; + + while (1) { + int j; + if (edma_shadow0_read_array(SH_IPR, 0)) + j = 0; + else if (edma_shadow0_read_array(SH_IPR, 1)) + j = 1; + else + break; + dev_dbg(data, "IPR%d %08x\n", j, + edma_shadow0_read_array(SH_IPR, j)); + for (i = 0; i < 32; i++) { + int k = (j << 5) + i; + if (edma_shadow0_read_array(SH_IPR, j) & (1 << i)) { + /* Clear the corresponding IPR bits */ + edma_shadow0_write_array(SH_ICR, j, (1 << i)); + if (intr_data[k].callback) { + intr_data[k].callback(k, DMA_COMPLETE, + intr_data[k].data); + } + } + } + cnt++; + if (cnt > 10) + break; + } + edma_shadow0_write(SH_IEVAL, 1); + return IRQ_HANDLED; +} + +/****************************************************************************** + * + * DMA error interrupt handler + * + *****************************************************************************/ +static irqreturn_t dma_ccerr_handler(int irq, void *data) +{ + int i; + unsigned int cnt = 0; + + dev_dbg(data, "dma_ccerr_handler\n"); + + if ((edma_read_array(EDMA_EMR, 0) == 0) && + (edma_read_array(EDMA_EMR, 1) == 0) && + (edma_read(EDMA_QEMR) == 0) && (edma_read(EDMA_CCERR) == 0)) + return IRQ_NONE; + + while (1) { + int j = -1; + if (edma_read_array(EDMA_EMR, 0)) + j = 0; + else if (edma_read_array(EDMA_EMR, 1)) + j = 1; + if (j >= 0) { + dev_dbg(data, "EMR%d %08x\n", j, + edma_read_array(EDMA_EMR, j)); + for (i = 0; i < 32; i++) { + int k = (j << 5) + i; + if (edma_read_array(EDMA_EMR, j) & (1 << i)) { + /* Clear the corresponding EMR bits */ + edma_write_array(EDMA_EMCR, j, 1 << i); + /* Clear any SER */ + edma_shadow0_write_array(SH_SECR, j, + (1 << i)); + if (intr_data[k].callback) { + intr_data[k].callback(k, + DMA_CC_ERROR, + intr_data + [k].data); + } + } + } + } else if (edma_read(EDMA_QEMR)) { + dev_dbg(data, "QEMR %02x\n", + edma_read(EDMA_QEMR)); + for (i = 0; i < 8; i++) { + if (edma_read(EDMA_QEMR) & (1 << i)) { + /* Clear the corresponding IPR bits */ + edma_write(EDMA_QEMCR, 1 << i); + edma_shadow0_write(SH_QSECR, (1 << i)); + + /* NOTE: not reported!! */ + } + } + } else if (edma_read(EDMA_CCERR)) { + dev_dbg(data, "CCERR %08x\n", + edma_read(EDMA_CCERR)); + /* FIXME: CCERR.BIT(16) ignored! much better + * to just write CCERRCLR with CCERR value... + */ + for (i = 0; i < 8; i++) { + if (edma_read(EDMA_CCERR) & (1 << i)) { + /* Clear the corresponding IPR bits */ + edma_write(EDMA_CCERRCLR, 1 << i); + + /* NOTE: not reported!! */ + } + } + } + if ((edma_read_array(EDMA_EMR, 0) == 0) + && (edma_read_array(EDMA_EMR, 1) == 0) + && (edma_read(EDMA_QEMR) == 0) + && (edma_read(EDMA_CCERR) == 0)) { + break; + } + cnt++; + if (cnt > 10) + break; + } + edma_write(EDMA_EEVAL, 1); + return IRQ_HANDLED; +} + +/****************************************************************************** + * + * Transfer controller error interrupt handlers + * + *****************************************************************************/ + +#define tc_errs_handled false /* disabled as long as they're NOPs */ + +static irqreturn_t dma_tc0err_handler(int irq, void *data) +{ + dev_dbg(data, "dma_tc0err_handler\n"); + return IRQ_HANDLED; +} + +static irqreturn_t dma_tc1err_handler(int irq, void *data) +{ + dev_dbg(data, "dma_tc1err_handler\n"); + return IRQ_HANDLED; +} + +/*-----------------------------------------------------------------------*/ + +/* Resource alloc/free: dma channels, parameter RAM slots */ + +/** + * edma_alloc_channel - allocate DMA channel and paired parameter RAM + * @channel: specific channel to allocate; negative for "any unmapped channel" + * @callback: optional; to be issued on DMA completion or errors + * @data: passed to callback + * @eventq_no: an EVENTQ_* constant, used to choose which Transfer + * Controller (TC) executes requests using this channel. Use + * EVENTQ_DEFAULT unless you really need a high priority queue. + * + * This allocates a DMA channel and its associated parameter RAM slot. + * The parameter RAM is initialized to hold a dummy transfer. + * + * Normal use is to pass a specific channel number as @channel, to make + * use of hardware events mapped to that channel. When the channel will + * be used only for software triggering or event chaining, channels not + * mapped to hardware events (or mapped to unused events) are preferable. + * + * DMA transfers start from a channel using edma_start(), or by + * chaining. When the transfer described in that channel's parameter RAM + * slot completes, that slot's data may be reloaded through a link. + * + * DMA errors are only reported to the @callback associated with the + * channel driving that transfer, but transfer completion callbacks can + * be sent to another channel under control of the TCC field in + * the option word of the transfer's parameter RAM set. Drivers must not + * use DMA transfer completion callbacks for channels they did not allocate. + * (The same applies to TCC codes used in transfer chaining.) + * + * Returns the number of the channel, else negative errno. + */ +int edma_alloc_channel(int channel, + void (*callback)(unsigned channel, u16 ch_status, void *data), + void *data, + enum dma_event_q eventq_no) +{ + if (channel < 0) { + channel = 0; + for (;;) { + channel = find_next_bit(edma_noevent, + num_channels, channel); + if (channel == num_channels) + return -ENOMEM; + if (!test_and_set_bit(channel, edma_inuse)) + break; + channel++; + } + } else if (channel >= num_channels) { + return -EINVAL; + } else if (test_and_set_bit(channel, edma_inuse)) { + return -EBUSY; + } + + /* ensure access through shadow region 0 */ + edma_or_array2(EDMA_DRAE, 0, channel >> 5, 1 << (channel & 0x1f)); + + /* ensure no events are pending */ + edma_stop(channel); + memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel), + &dummy_paramset, PARM_SIZE); + + if (callback) + setup_dma_interrupt(channel, callback, data); + + map_dmach_queue(channel, eventq_no); + + return channel; +} +EXPORT_SYMBOL(edma_alloc_channel); + + +/** + * edma_free_channel - deallocate DMA channel + * @channel: dma channel returned from edma_alloc_channel() + * + * This deallocates the DMA channel and associated parameter RAM slot + * allocated by edma_alloc_channel(). + * + * Callers are responsible for ensuring the channel is inactive, and + * will not be reactivated by linking, chaining, or software calls to + * edma_start(). + */ +void edma_free_channel(unsigned channel) +{ + if (channel >= num_channels) + return; + + setup_dma_interrupt(channel, NULL, NULL); + /* REVISIT should probably take out of shadow region 0 */ + + memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel), + &dummy_paramset, PARM_SIZE); + clear_bit(channel, edma_inuse); +} +EXPORT_SYMBOL(edma_free_channel); + +/** + * edma_alloc_slot - allocate DMA parameter RAM + * @slot: specific slot to allocate; negative for "any unused slot" + * + * This allocates a parameter RAM slot, initializing it to hold a + * dummy transfer. Slots allocated using this routine have not been + * mapped to a hardware DMA channel, and will normally be used by + * linking to them from a slot associated with a DMA channel. + * + * Normal use is to pass EDMA_SLOT_ANY as the @slot, but specific + * slots may be allocated on behalf of DSP firmware. + * + * Returns the number of the slot, else negative errno. + */ +int edma_alloc_slot(int slot) +{ + if (slot < 0) { + slot = num_channels; + for (;;) { + slot = find_next_zero_bit(edma_inuse, + num_slots, slot); + if (slot == num_slots) + return -ENOMEM; + if (!test_and_set_bit(slot, edma_inuse)) + break; + } + } else if (slot < num_channels || slot >= num_slots) { + return -EINVAL; + } else if (test_and_set_bit(slot, edma_inuse)) { + return -EBUSY; + } + + memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), + &dummy_paramset, PARM_SIZE); + + return slot; +} +EXPORT_SYMBOL(edma_alloc_slot); + +/** + * edma_free_slot - deallocate DMA parameter RAM + * @slot: parameter RAM slot returned from edma_alloc_slot() + * + * This deallocates the parameter RAM slot allocated by edma_alloc_slot(). + * Callers are responsible for ensuring the slot is inactive, and will + * not be activated. + */ +void edma_free_slot(unsigned slot) +{ + if (slot < num_channels || slot >= num_slots) + return; + + memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), + &dummy_paramset, PARM_SIZE); + clear_bit(slot, edma_inuse); +} +EXPORT_SYMBOL(edma_free_slot); + +/*-----------------------------------------------------------------------*/ + +/* Parameter RAM operations (i) -- read/write partial slots */ + +/** + * edma_set_src - set initial DMA source address in parameter RAM slot + * @slot: parameter RAM slot being configured + * @src_port: physical address of source (memory, controller FIFO, etc) + * @addressMode: INCR, except in very rare cases + * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the + * width to use when addressing the fifo (e.g. W8BIT, W32BIT) + * + * Note that the source address is modified during the DMA transfer + * according to edma_set_src_index(). + */ +void edma_set_src(unsigned slot, dma_addr_t src_port, + enum address_mode mode, enum fifo_width width) +{ + if (slot < num_slots) { + unsigned int i = edma_parm_read(PARM_OPT, slot); + + if (mode) { + /* set SAM and program FWID */ + i = (i & ~(EDMA_FWID)) | (SAM | ((width & 0x7) << 8)); + } else { + /* clear SAM */ + i &= ~SAM; + } + edma_parm_write(PARM_OPT, slot, i); + + /* set the source port address + in source register of param structure */ + edma_parm_write(PARM_SRC, slot, src_port); + } +} +EXPORT_SYMBOL(edma_set_src); + +/** + * edma_set_dest - set initial DMA destination address in parameter RAM slot + * @slot: parameter RAM slot being configured + * @dest_port: physical address of destination (memory, controller FIFO, etc) + * @addressMode: INCR, except in very rare cases + * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the + * width to use when addressing the fifo (e.g. W8BIT, W32BIT) + * + * Note that the destination address is modified during the DMA transfer + * according to edma_set_dest_index(). + */ +void edma_set_dest(unsigned slot, dma_addr_t dest_port, + enum address_mode mode, enum fifo_width width) +{ + if (slot < num_slots) { + unsigned int i = edma_parm_read(PARM_OPT, slot); + + if (mode) { + /* set DAM and program FWID */ + i = (i & ~(EDMA_FWID)) | (DAM | ((width & 0x7) << 8)); + } else { + /* clear DAM */ + i &= ~DAM; + } + edma_parm_write(PARM_OPT, slot, i); + /* set the destination port address + in dest register of param structure */ + edma_parm_write(PARM_DST, slot, dest_port); + } +} +EXPORT_SYMBOL(edma_set_dest); + +/** + * edma_get_position - returns the current transfer points + * @slot: parameter RAM slot being examined + * @src: pointer to source port position + * @dst: pointer to destination port position + * + * Returns current source and destination addresses for a particular + * parameter RAM slot. Its channel should not be active when this is called. + */ +void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst) +{ + struct edmacc_param temp; + + edma_read_slot(slot, &temp); + if (src != NULL) + *src = temp.src; + if (dst != NULL) + *dst = temp.dst; +} +EXPORT_SYMBOL(edma_get_position); + +/** + * edma_set_src_index - configure DMA source address indexing + * @slot: parameter RAM slot being configured + * @src_bidx: byte offset between source arrays in a frame + * @src_cidx: byte offset between source frames in a block + * + * Offsets are specified to support either contiguous or discontiguous + * memory transfers, or repeated access to a hardware register, as needed. + * When accessing hardware registers, both offsets are normally zero. + */ +void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx) +{ + if (slot < num_slots) { + edma_parm_modify(PARM_SRC_DST_BIDX, slot, + 0xffff0000, src_bidx); + edma_parm_modify(PARM_SRC_DST_CIDX, slot, + 0xffff0000, src_cidx); + } +} +EXPORT_SYMBOL(edma_set_src_index); + +/** + * edma_set_dest_index - configure DMA destination address indexing + * @slot: parameter RAM slot being configured + * @dest_bidx: byte offset between destination arrays in a frame + * @dest_cidx: byte offset between destination frames in a block + * + * Offsets are specified to support either contiguous or discontiguous + * memory transfers, or repeated access to a hardware register, as needed. + * When accessing hardware registers, both offsets are normally zero. + */ +void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx) +{ + if (slot < num_slots) { + edma_parm_modify(PARM_SRC_DST_BIDX, slot, + 0x0000ffff, dest_bidx << 16); + edma_parm_modify(PARM_SRC_DST_CIDX, slot, + 0x0000ffff, dest_cidx << 16); + } +} +EXPORT_SYMBOL(edma_set_dest_index); + +/** + * edma_set_transfer_params - configure DMA transfer parameters + * @slot: parameter RAM slot being configured + * @acnt: how many bytes per array (at least one) + * @bcnt: how many arrays per frame (at least one) + * @ccnt: how many frames per block (at least one) + * @bcnt_rld: used only for A-Synchronized transfers; this specifies + * the value to reload into bcnt when it decrements to zero + * @sync_mode: ASYNC or ABSYNC + * + * See the EDMA3 documentation to understand how to configure and link + * transfers using the fields in PaRAM slots. If you are not doing it + * all at once with edma_write_slot(), you will use this routine + * plus two calls each for source and destination, setting the initial + * address and saying how to index that address. + * + * An example of an A-Synchronized transfer is a serial link using a + * single word shift register. In that case, @acnt would be equal to + * that word size; the serial controller issues a DMA synchronization + * event to transfer each word, and memory access by the DMA transfer + * controller will be word-at-a-time. + * + * An example of an AB-Synchronized transfer is a device using a FIFO. + * In that case, @acnt equals the FIFO width and @bcnt equals its depth. + * The controller with the FIFO issues DMA synchronization events when + * the FIFO threshold is reached, and the DMA transfer controller will + * transfer one frame to (or from) the FIFO. It will probably use + * efficient burst modes to access memory. + */ +void edma_set_transfer_params(unsigned slot, + u16 acnt, u16 bcnt, u16 ccnt, + u16 bcnt_rld, enum sync_dimension sync_mode) +{ + if (slot < num_slots) { + edma_parm_modify(PARM_LINK_BCNTRLD, slot, + 0x0000ffff, bcnt_rld << 16); + if (sync_mode == ASYNC) + edma_parm_and(PARM_OPT, slot, ~SYNCDIM); + else + edma_parm_or(PARM_OPT, slot, SYNCDIM); + /* Set the acount, bcount, ccount registers */ + edma_parm_write(PARM_A_B_CNT, slot, (bcnt << 16) | acnt); + edma_parm_write(PARM_CCNT, slot, ccnt); + } +} +EXPORT_SYMBOL(edma_set_transfer_params); + +/** + * edma_link - link one parameter RAM slot to another + * @from: parameter RAM slot originating the link + * @to: parameter RAM slot which is the link target + * + * The originating slot should not be part of any active DMA transfer. + */ +void edma_link(unsigned from, unsigned to) +{ + if (from >= num_slots) + return; + if (to >= num_slots) + return; + edma_parm_modify(PARM_LINK_BCNTRLD, from, 0xffff0000, PARM_OFFSET(to)); +} +EXPORT_SYMBOL(edma_link); + +/** + * edma_unlink - cut link from one parameter RAM slot + * @from: parameter RAM slot originating the link + * + * The originating slot should not be part of any active DMA transfer. + * Its link is set to 0xffff. + */ +void edma_unlink(unsigned from) +{ + if (from >= num_slots) + return; + edma_parm_or(PARM_LINK_BCNTRLD, from, 0xffff); +} +EXPORT_SYMBOL(edma_unlink); + +/*-----------------------------------------------------------------------*/ + +/* Parameter RAM operations (ii) -- read/write whole parameter sets */ + +/** + * edma_write_slot - write parameter RAM data for slot + * @slot: number of parameter RAM slot being modified + * @param: data to be written into parameter RAM slot + * + * Use this to assign all parameters of a transfer at once. This + * allows more efficient setup of transfers than issuing multiple + * calls to set up those parameters in small pieces, and provides + * complete control over all transfer options. + */ +void edma_write_slot(unsigned slot, const struct edmacc_param *param) +{ + if (slot >= num_slots) + return; + memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), param, PARM_SIZE); +} +EXPORT_SYMBOL(edma_write_slot); + +/** + * edma_read_slot - read parameter RAM data from slot + * @slot: number of parameter RAM slot being copied + * @param: where to store copy of parameter RAM data + * + * Use this to read data from a parameter RAM slot, perhaps to + * save them as a template for later reuse. + */ +void edma_read_slot(unsigned slot, struct edmacc_param *param) +{ + if (slot >= num_slots) + return; + memcpy_fromio(param, edmacc_regs_base + PARM_OFFSET(slot), PARM_SIZE); +} +EXPORT_SYMBOL(edma_read_slot); + +/*-----------------------------------------------------------------------*/ + +/* Various EDMA channel control operations */ + +/** + * edma_pause - pause dma on a channel + * @channel: on which edma_start() has been called + * + * This temporarily disables EDMA hardware events on the specified channel, + * preventing them from triggering new transfers on its behalf + */ +void edma_pause(unsigned channel) +{ + if (channel < num_channels) { + unsigned int mask = (1 << (channel & 0x1f)); + + edma_shadow0_write_array(SH_EECR, channel >> 5, mask); + } +} +EXPORT_SYMBOL(edma_pause); + +/** + * edma_resume - resumes dma on a paused channel + * @channel: on which edma_pause() has been called + * + * This re-enables EDMA hardware events on the specified channel. + */ +void edma_resume(unsigned channel) +{ + if (channel < num_channels) { + unsigned int mask = (1 << (channel & 0x1f)); + + edma_shadow0_write_array(SH_EESR, channel >> 5, mask); + } +} +EXPORT_SYMBOL(edma_resume); + +/** + * edma_start - start dma on a channel + * @channel: channel being activated + * + * Channels with event associations will be triggered by their hardware + * events, and channels without such associations will be triggered by + * software. (At this writing there is no interface for using software + * triggers except with channels that don't support hardware triggers.) + * + * Returns zero on success, else negative errno. + */ +int edma_start(unsigned channel) +{ + if (channel < num_channels) { + int j = channel >> 5; + unsigned int mask = (1 << (channel & 0x1f)); + + /* EDMA channels without event association */ + if (test_bit(channel, edma_noevent)) { + pr_debug("EDMA: ESR%d %08x\n", j, + edma_shadow0_read_array(SH_ESR, j)); + edma_shadow0_write_array(SH_ESR, j, mask); + return 0; + } + + /* EDMA channel with event association */ + pr_debug("EDMA: ER%d %08x\n", j, + edma_shadow0_read_array(SH_ER, j)); + /* Clear any pending error */ + edma_write_array(EDMA_EMCR, j, mask); + /* Clear any SER */ + edma_shadow0_write_array(SH_SECR, j, mask); + edma_shadow0_write_array(SH_EESR, j, mask); + pr_debug("EDMA: EER%d %08x\n", j, + edma_shadow0_read_array(SH_EER, j)); + return 0; + } + + return -EINVAL; +} +EXPORT_SYMBOL(edma_start); + +/** + * edma_stop - stops dma on the channel passed + * @channel: channel being deactivated + * + * When @lch is a channel, any active transfer is paused and + * all pending hardware events are cleared. The current transfer + * may not be resumed, and the channel's Parameter RAM should be + * reinitialized before being reused. + */ +void edma_stop(unsigned channel) +{ + if (channel < num_channels) { + int j = channel >> 5; + unsigned int mask = (1 << (channel & 0x1f)); + + edma_shadow0_write_array(SH_EECR, j, mask); + edma_shadow0_write_array(SH_ECR, j, mask); + edma_shadow0_write_array(SH_SECR, j, mask); + edma_write_array(EDMA_EMCR, j, mask); + + pr_debug("EDMA: EER%d %08x\n", j, + edma_shadow0_read_array(SH_EER, j)); + + /* REVISIT: consider guarding against inappropriate event + * chaining by overwriting with dummy_paramset. + */ + } +} +EXPORT_SYMBOL(edma_stop); + +/****************************************************************************** + * + * It cleans ParamEntry qand bring back EDMA to initial state if media has + * been removed before EDMA has finished.It is usedful for removable media. + * Arguments: + * ch_no - channel no + * + * Return: zero on success, or corresponding error no on failure + * + * FIXME this should not be needed ... edma_stop() should suffice. + * + *****************************************************************************/ + +void edma_clean_channel(unsigned channel) +{ + if (channel < num_channels) { + int j = (channel >> 5); + unsigned int mask = 1 << (channel & 0x1f); + + pr_debug("EDMA: EMR%d %08x\n", j, + edma_read_array(EDMA_EMR, j)); + edma_shadow0_write_array(SH_ECR, j, mask); + /* Clear the corresponding EMR bits */ + edma_write_array(EDMA_EMCR, j, mask); + /* Clear any SER */ + edma_shadow0_write_array(SH_SECR, j, mask); + edma_write(EDMA_CCERRCLR, (1 << 16) | 0x3); + } +} +EXPORT_SYMBOL(edma_clean_channel); + +/* + * edma_clear_event - clear an outstanding event on the DMA channel + * Arguments: + * channel - channel number + */ +void edma_clear_event(unsigned channel) +{ + if (channel >= num_channels) + return; + if (channel < 32) + edma_write(EDMA_ECR, 1 << channel); + else + edma_write(EDMA_ECRH, 1 << (channel - 32)); +} +EXPORT_SYMBOL(edma_clear_event); + +/*-----------------------------------------------------------------------*/ + +static int __init edma_probe(struct platform_device *pdev) +{ + struct edma_soc_info *info = pdev->dev.platform_data; + int i; + int status; + const s8 *noevent; + int irq = 0, err_irq = 0; + struct resource *r; + resource_size_t len; + + if (!info) + return -ENODEV; + + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "edma_cc"); + if (!r) + return -ENODEV; + + len = r->end - r->start + 1; + + r = request_mem_region(r->start, len, r->name); + if (!r) + return -EBUSY; + + edmacc_regs_base = ioremap(r->start, len); + if (!edmacc_regs_base) { + status = -EBUSY; + goto fail1; + } + + num_channels = min_t(unsigned, info->n_channel, EDMA_MAX_DMACH); + num_slots = min_t(unsigned, info->n_slot, EDMA_MAX_PARAMENTRY); + + dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n", edmacc_regs_base); + + for (i = 0; i < num_slots; i++) + memcpy_toio(edmacc_regs_base + PARM_OFFSET(i), + &dummy_paramset, PARM_SIZE); + + noevent = info->noevent; + if (noevent) { + while (*noevent != -1) + set_bit(*noevent++, edma_noevent); + } + + irq = platform_get_irq(pdev, 0); + status = request_irq(irq, dma_irq_handler, 0, "edma", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", + irq, status); + goto fail; + } + + err_irq = platform_get_irq(pdev, 1); + status = request_irq(err_irq, dma_ccerr_handler, 0, + "edma_error", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", + err_irq, status); + goto fail; + } + + if (tc_errs_handled) { + status = request_irq(IRQ_TCERRINT0, dma_tc0err_handler, 0, + "edma_tc0", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", + IRQ_TCERRINT0, status); + return status; + } + status = request_irq(IRQ_TCERRINT, dma_tc1err_handler, 0, + "edma_tc1", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d --> %d\n", + IRQ_TCERRINT, status); + return status; + } + } + + /* Everything lives on transfer controller 1 until otherwise specified. + * This way, long transfers on the low priority queue + * started by the codec engine will not cause audio defects. + */ + for (i = 0; i < num_channels; i++) + map_dmach_queue(i, EVENTQ_1); + + /* Event queue to TC mapping */ + for (i = 0; queue_tc_mapping[i][0] != -1; i++) + map_queue_tc(queue_tc_mapping[i][0], queue_tc_mapping[i][1]); + + /* Event queue priority mapping */ + for (i = 0; queue_priority_mapping[i][0] != -1; i++) + assign_priority_to_queue(queue_priority_mapping[i][0], + queue_priority_mapping[i][1]); + + for (i = 0; i < info->n_region; i++) { + edma_write_array2(EDMA_DRAE, i, 0, 0x0); + edma_write_array2(EDMA_DRAE, i, 1, 0x0); + edma_write_array(EDMA_QRAE, i, 0x0); + } + + return 0; + +fail: + if (err_irq) + free_irq(err_irq, NULL); + if (irq) + free_irq(irq, NULL); + iounmap(edmacc_regs_base); +fail1: + release_mem_region(r->start, len); + return status; +} + + +static struct platform_driver edma_driver = { + .driver.name = "edma", +}; + +static int __init edma_init(void) +{ + return platform_driver_probe(&edma_driver, edma_probe); +} +arch_initcall(edma_init); + diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h new file mode 100644 index 000000000000..f6fc5396dafc --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/edma.h @@ -0,0 +1,228 @@ +/* + * TI DAVINCI dma definitions + * + * Copyright (C) 2006-2009 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +/* + * This EDMA3 programming framework exposes two basic kinds of resource: + * + * Channel Triggers transfers, usually from a hardware event but + * also manually or by "chaining" from DMA completions. + * Each channel is coupled to a Parameter RAM (PaRAM) slot. + * + * Slot Each PaRAM slot holds a DMA transfer descriptor (PaRAM + * "set"), source and destination addresses, a link to a + * next PaRAM slot (if any), options for the transfer, and + * instructions for updating those addresses. There are + * more than twice as many slots as event channels. + * + * Each PaRAM set describes a sequence of transfers, either for one large + * buffer or for several discontiguous smaller buffers. An EDMA transfer + * is driven only from a channel, which performs the transfers specified + * in its PaRAM slot until there are no more transfers. When that last + * transfer completes, the "link" field may be used to reload the channel's + * PaRAM slot with a new transfer descriptor. + * + * The EDMA Channel Controller (CC) maps requests from channels into physical + * Transfer Controller (TC) requests when the channel triggers (by hardware + * or software events, or by chaining). The two physical DMA channels provided + * by the TCs are thus shared by many logical channels. + * + * DaVinci hardware also has a "QDMA" mechanism which is not currently + * supported through this interface. (DSP firmware uses it though.) + */ + +#ifndef EDMA_H_ +#define EDMA_H_ + +/* PaRAM slots are laid out like this */ +struct edmacc_param { + unsigned int opt; + unsigned int src; + unsigned int a_b_cnt; + unsigned int dst; + unsigned int src_dst_bidx; + unsigned int link_bcntrld; + unsigned int src_dst_cidx; + unsigned int ccnt; +}; + +#define CCINT0_INTERRUPT 16 +#define CCERRINT_INTERRUPT 17 +#define TCERRINT0_INTERRUPT 18 +#define TCERRINT1_INTERRUPT 19 + +/* fields in edmacc_param.opt */ +#define SAM BIT(0) +#define DAM BIT(1) +#define SYNCDIM BIT(2) +#define STATIC BIT(3) +#define EDMA_FWID (0x07 << 8) +#define TCCMODE BIT(11) +#define EDMA_TCC(t) ((t) << 12) +#define TCINTEN BIT(20) +#define ITCINTEN BIT(21) +#define TCCHEN BIT(22) +#define ITCCHEN BIT(23) + +#define TRWORD (0x7<<2) +#define PAENTRY (0x1ff<<5) + +/* Drivers should avoid using these symbolic names for dm644x + * channels, and use platform_device IORESOURCE_DMA resources + * instead. (Other DaVinci chips have different peripherals + * and thus have different DMA channel mappings.) + */ +#define DAVINCI_DMA_MCBSP_TX 2 +#define DAVINCI_DMA_MCBSP_RX 3 +#define DAVINCI_DMA_VPSS_HIST 4 +#define DAVINCI_DMA_VPSS_H3A 5 +#define DAVINCI_DMA_VPSS_PRVU 6 +#define DAVINCI_DMA_VPSS_RSZ 7 +#define DAVINCI_DMA_IMCOP_IMXINT 8 +#define DAVINCI_DMA_IMCOP_VLCDINT 9 +#define DAVINCI_DMA_IMCO_PASQINT 10 +#define DAVINCI_DMA_IMCOP_DSQINT 11 +#define DAVINCI_DMA_SPI_SPIX 16 +#define DAVINCI_DMA_SPI_SPIR 17 +#define DAVINCI_DMA_UART0_URXEVT0 18 +#define DAVINCI_DMA_UART0_UTXEVT0 19 +#define DAVINCI_DMA_UART1_URXEVT1 20 +#define DAVINCI_DMA_UART1_UTXEVT1 21 +#define DAVINCI_DMA_UART2_URXEVT2 22 +#define DAVINCI_DMA_UART2_UTXEVT2 23 +#define DAVINCI_DMA_MEMSTK_MSEVT 24 +#define DAVINCI_DMA_MMCRXEVT 26 +#define DAVINCI_DMA_MMCTXEVT 27 +#define DAVINCI_DMA_I2C_ICREVT 28 +#define DAVINCI_DMA_I2C_ICXEVT 29 +#define DAVINCI_DMA_GPIO_GPINT0 32 +#define DAVINCI_DMA_GPIO_GPINT1 33 +#define DAVINCI_DMA_GPIO_GPINT2 34 +#define DAVINCI_DMA_GPIO_GPINT3 35 +#define DAVINCI_DMA_GPIO_GPINT4 36 +#define DAVINCI_DMA_GPIO_GPINT5 37 +#define DAVINCI_DMA_GPIO_GPINT6 38 +#define DAVINCI_DMA_GPIO_GPINT7 39 +#define DAVINCI_DMA_GPIO_GPBNKINT0 40 +#define DAVINCI_DMA_GPIO_GPBNKINT1 41 +#define DAVINCI_DMA_GPIO_GPBNKINT2 42 +#define DAVINCI_DMA_GPIO_GPBNKINT3 43 +#define DAVINCI_DMA_GPIO_GPBNKINT4 44 +#define DAVINCI_DMA_TIMER0_TINT0 48 +#define DAVINCI_DMA_TIMER1_TINT1 49 +#define DAVINCI_DMA_TIMER2_TINT2 50 +#define DAVINCI_DMA_TIMER3_TINT3 51 +#define DAVINCI_DMA_PWM0 52 +#define DAVINCI_DMA_PWM1 53 +#define DAVINCI_DMA_PWM2 54 + +/*ch_status paramater of callback function possible values*/ +#define DMA_COMPLETE 1 +#define DMA_CC_ERROR 2 +#define DMA_TC1_ERROR 3 +#define DMA_TC2_ERROR 4 + +enum address_mode { + INCR = 0, + FIFO = 1 +}; + +enum fifo_width { + W8BIT = 0, + W16BIT = 1, + W32BIT = 2, + W64BIT = 3, + W128BIT = 4, + W256BIT = 5 +}; + +enum dma_event_q { + EVENTQ_0 = 0, + EVENTQ_1 = 1, + EVENTQ_DEFAULT = -1 +}; + +enum sync_dimension { + ASYNC = 0, + ABSYNC = 1 +}; + +#define EDMA_CHANNEL_ANY -1 /* for edma_alloc_channel() */ +#define EDMA_SLOT_ANY -1 /* for edma_alloc_slot() */ + +/* alloc/free DMA channels and their dedicated parameter RAM slots */ +int edma_alloc_channel(int channel, + void (*callback)(unsigned channel, u16 ch_status, void *data), + void *data, enum dma_event_q); +void edma_free_channel(unsigned channel); + +/* alloc/free parameter RAM slots */ +int edma_alloc_slot(int slot); +void edma_free_slot(unsigned slot); + +/* calls that operate on part of a parameter RAM slot */ +void edma_set_src(unsigned slot, dma_addr_t src_port, + enum address_mode mode, enum fifo_width); +void edma_set_dest(unsigned slot, dma_addr_t dest_port, + enum address_mode mode, enum fifo_width); +void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst); +void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx); +void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx); +void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt, + u16 bcnt_rld, enum sync_dimension sync_mode); +void edma_link(unsigned from, unsigned to); +void edma_unlink(unsigned from); + +/* calls that operate on an entire parameter RAM slot */ +void edma_write_slot(unsigned slot, const struct edmacc_param *params); +void edma_read_slot(unsigned slot, struct edmacc_param *params); + +/* channel control operations */ +int edma_start(unsigned channel); +void edma_stop(unsigned channel); +void edma_clean_channel(unsigned channel); +void edma_clear_event(unsigned channel); +void edma_pause(unsigned channel); +void edma_resume(unsigned channel); + +/* UNRELATED TO DMA */ +int davinci_alloc_iram(unsigned size); +void davinci_free_iram(unsigned addr, unsigned size); + +/* platform_data for EDMA driver */ +struct edma_soc_info { + + /* how many dma resources of each type */ + unsigned n_channel; + unsigned n_region; + unsigned n_slot; + unsigned n_tc; + + /* list of channels with no even trigger; terminated by "-1" */ + const s8 *noevent; +}; + +#endif -- cgit v1.2.2 From 474dad54baee8f8abe63ac334357a37021147701 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sun, 7 Dec 2008 11:46:23 -0800 Subject: davinci: gpio bugfixes Update the DaVinci GPIO code to work better on non-dm6446 parts, notably the dm355: - Only handle the number of GPIOs the chip actually has. So for example on dm6467, GPIO-42 is the last GPIO, and trying to use GPIO-43 now fails cleanly; or GPIO-72 on dm6446. - Enable GPIO interrupts on each 16-bit GPIO-irq bank ... previously, only the first five were enabled, so GPIO-80 and above (on dm355) wouldn't trigger IRQs. - Use the right IRQ for each GPIO bank. The wrong values were used for dm355 chips, so GPIO IRQs got routed incorrectly. - Handle up to four pairs of 16-bit GPIO banks ... previously only three were handled, so accessing GPIO-96 and up (e.g. on dm355) would oops. - Update several comments that were dm6446-specific. Verified by receiving GPIO-1 (dm9000) and GPIO-5 (msp430) IRQs on the DM355 EVM. One thing this doesn't do is handle the way some of the GPIO numbers on dm6467 are reserved but aren't valid as GPIOs. Some bitmap logic could fix that if needed. Signed-off-by: David Brownell Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/gpio.c | 82 ++++++++++++++++++++++--------- arch/arm/mach-davinci/include/mach/gpio.h | 23 ++++----- 2 files changed, 69 insertions(+), 36 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c index b49e9d092aab..1aba41c6351e 100644 --- a/arch/arm/mach-davinci/gpio.c +++ b/arch/arm/mach-davinci/gpio.c @@ -20,6 +20,7 @@ #include #include +#include #include #include #include @@ -36,9 +37,10 @@ struct davinci_gpio { static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)]; +static unsigned __initdata ngpio; /* create a non-inlined version */ -static struct gpio_controller *__iomem __init gpio2controller(unsigned gpio) +static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio) { return __gpio_to_controller(gpio); } @@ -114,9 +116,30 @@ static int __init davinci_gpio_setup(void) { int i, base; - for (i = 0, base = 0; - i < ARRAY_SIZE(chips); - i++, base += 32) { + /* The gpio banks conceptually expose a segmented bitmap, + * and "ngpio" is one more than the largest zero-based + * bit index that's valid. + */ + if (cpu_is_davinci_dm355()) { /* or dm335() */ + ngpio = 104; + } else if (cpu_is_davinci_dm644x()) { /* or dm337() */ + ngpio = 71; + } else if (cpu_is_davinci_dm646x()) { + /* NOTE: each bank has several "reserved" bits, + * unusable as GPIOs. Only 33 of the GPIO numbers + * are usable, and we're not rejecting the others. + */ + ngpio = 43; + } else { + /* if cpu_is_davinci_dm643x() ngpio = 111 */ + pr_err("GPIO setup: how many GPIOs?\n"); + return -EINVAL; + } + + if (WARN_ON(DAVINCI_N_GPIO < ngpio)) + ngpio = DAVINCI_N_GPIO; + + for (i = 0, base = 0; base < ngpio; i++, base += 32) { chips[i].chip.label = "DaVinci"; chips[i].chip.direction_input = davinci_direction_in; @@ -125,7 +148,7 @@ static int __init davinci_gpio_setup(void) chips[i].chip.set = davinci_gpio_set; chips[i].chip.base = base; - chips[i].chip.ngpio = DAVINCI_N_GPIO - base; + chips[i].chip.ngpio = ngpio - base; if (chips[i].chip.ngpio > 32) chips[i].chip.ngpio = 32; @@ -143,11 +166,11 @@ pure_initcall(davinci_gpio_setup); * We expect irqs will normally be set up as input pins, but they can also be * used as output pins ... which is convenient for testing. * - * NOTE: GPIO0..GPIO7 also have direct INTC hookups, which work in addition - * to their GPIOBNK0 irq (but with a bit less overhead). But we don't have - * a good way to hook those up ... + * NOTE: The first few GPIOs also have direct INTC hookups in addition + * to their GPIOBNK0 irq, with a bit less overhead but less flexibility + * on triggering (e.g. no edge options). We don't try to use those. * - * All those INTC hookups (GPIO0..GPIO7 plus five IRQ banks) can also + * All those INTC hookups (direct, plus several IRQ banks) can also * serve as EDMA event triggers. */ @@ -235,29 +258,42 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc) } /* - * NOTE: for suspend/resume, probably best to make a sysdev (and class) - * with its suspend/resume calls hooking into the results of the set_wake() + * NOTE: for suspend/resume, probably best to make a platform_device with + * suspend_late/resume_resume calls hooking into results of the set_wake() * calls ... so if no gpios are wakeup events the clock can be disabled, * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0 - * can be set appropriately for GPIOV33 pins. + * (dm6446) can be set appropriately for GPIOV33 pins. */ static int __init davinci_gpio_irq_setup(void) { unsigned gpio, irq, bank; + unsigned bank_irq; struct clk *clk; + u32 binten = 0; + + if (cpu_is_davinci_dm355()) { /* or dm335() */ + bank_irq = IRQ_DM355_GPIOBNK0; + } else if (cpu_is_davinci_dm644x()) { + bank_irq = IRQ_GPIOBNK0; + } else if (cpu_is_davinci_dm646x()) { + bank_irq = IRQ_DM646X_GPIOBNK0; + } else { + printk(KERN_ERR "Don't know first GPIO bank IRQ.\n"); + return -EINVAL; + } clk = clk_get(NULL, "gpio"); if (IS_ERR(clk)) { printk(KERN_ERR "Error %ld getting gpio clock?\n", PTR_ERR(clk)); - return 0; + return PTR_ERR(clk); } - clk_enable(clk); - for (gpio = 0, irq = gpio_to_irq(0), bank = IRQ_GPIOBNK0; - gpio < DAVINCI_N_GPIO; bank++) { + for (gpio = 0, irq = gpio_to_irq(0), bank = 0; + gpio < ngpio; + bank++, bank_irq++) { struct gpio_controller *__iomem g = gpio2controller(gpio); unsigned i; @@ -265,28 +301,28 @@ static int __init davinci_gpio_irq_setup(void) __raw_writel(~0, &g->clr_rising); /* set up all irqs in this bank */ - set_irq_chained_handler(bank, gpio_irq_handler); - set_irq_chip_data(bank, g); - set_irq_data(bank, (void *)irq); + set_irq_chained_handler(bank_irq, gpio_irq_handler); + set_irq_chip_data(bank_irq, g); + set_irq_data(bank_irq, (void *)irq); - for (i = 0; i < 16 && gpio < DAVINCI_N_GPIO; - i++, irq++, gpio++) { + for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) { set_irq_chip(irq, &gpio_irqchip); set_irq_chip_data(irq, g); set_irq_handler(irq, handle_simple_irq); set_irq_flags(irq, IRQF_VALID); } + + binten |= BIT(bank); } /* BINTEN -- per-bank interrupt enable. genirq would also let these * bits be set/cleared dynamically. */ - __raw_writel(0x1f, (void *__iomem) + __raw_writel(binten, (void *__iomem) IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08)); printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0)); return 0; } - arch_initcall(davinci_gpio_irq_setup); diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h index 5e7c36b202f1..efe3281364e6 100644 --- a/arch/arm/mach-davinci/include/mach/gpio.h +++ b/arch/arm/mach-davinci/include/mach/gpio.h @@ -28,23 +28,18 @@ * go through boot loaders. * * the gpio clock will be turned on when gpios are used, and you may also - * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are + * need to pay attention to PINMUX registers to be sure those pins are * used as gpios, not with other peripherals. * * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation, - * and maybe for later updates, code should write GPIO(N) or: - * - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53) - * - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70) - * - * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc - * for now, that's != GPIO(N) + * and maybe for later updates, code may write GPIO(N). These may be + * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip + * may not support all the GPIOs in that range. * * GPIOs can also be on external chips, numbered after the ones built-in * to the DaVinci chip. For now, they won't be usable as IRQ sources. */ -#define GPIO(X) (X) /* 0 <= X <= 70 */ -#define GPIOV18(X) (X) /* 1.8V i/o; 0 <= X <= 53 */ -#define GPIOV33(X) ((X)+54) /* 3.3V i/o; 0 <= X <= 17 */ +#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */ struct gpio_controller { u32 dir; @@ -73,12 +68,14 @@ __gpio_to_controller(unsigned gpio) { void *__iomem ptr; - if (gpio < 32) + if (gpio < 32 * 1) ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10); - else if (gpio < 64) + else if (gpio < 32 * 2) ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38); - else if (gpio < DAVINCI_N_GPIO) + else if (gpio < 32 * 3) ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60); + else if (gpio < 32 * 4) + ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x88); else ptr = NULL; return ptr; -- cgit v1.2.2 From fe277d9bbba9c2851ec11edcd5701f82e034ddd4 Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Thu, 26 Mar 2009 19:33:21 -0700 Subject: davinci: PSC: Clear bits in MDCTL reg before setting new bits Clear any set bits in the 'NEXT' field of the MDCTL register in the Power and Sleep Controller (PSC) before setting any new bits. This also allows some minor cleanup by removing some no longer needed lines of code. Signed-off-by: Mark A. Greer Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/psc.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index e44544ac2b16..84171abf5f7b 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -39,6 +39,7 @@ #define MDSTAT 0x800 #define MDCTL 0xA00 +#define MDSTAT_STATE_MASK 0x1f /* Return nonzero iff the domain's clock is active */ int __init davinci_psc_is_clk_active(unsigned int id) @@ -53,14 +54,13 @@ int __init davinci_psc_is_clk_active(unsigned int id) /* Enable or disable a PSC domain */ void davinci_psc_config(unsigned int domain, unsigned int id, char enable) { - u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask; + u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl; void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE); + u32 next_state = enable ? 0x3 : 0x2; /* 0x3 enables, 0x2 disables */ mdctl = __raw_readl(psc_base + MDCTL + 4 * id); - if (enable) - mdctl |= 0x00000003; /* Enable Module */ - else - mdctl &= 0xFFFFFFE2; /* Disable Module */ + mdctl &= ~MDSTAT_STATE_MASK; + mdctl |= next_state; __raw_writel(mdctl, psc_base + MDCTL + 4 * id); pdstat = __raw_readl(psc_base + PDSTAT); @@ -93,12 +93,7 @@ void davinci_psc_config(unsigned int domain, unsigned int id, char enable) } while (!(((ptstat >> domain) & 1) == 0)); } - if (enable) - mdstat_mask = 0x3; - else - mdstat_mask = 0x2; - do { mdstat = __raw_readl(psc_base + MDSTAT + 4 * id); - } while (!((mdstat & 0x0000001F) == mdstat_mask)); + } while (!((mdstat & MDSTAT_STATE_MASK) == next_state)); } -- cgit v1.2.2 From 9e16469c83167d6869ad6cbe83312027ec529c64 Mon Sep 17 00:00:00 2001 From: Sudhakar Rajashekhara Date: Tue, 14 Apr 2009 07:53:02 -0500 Subject: davinci: DM646x: add interrupt number and priorities Signed-off-by: Sudhakar Rajashekhara Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/include/mach/irqs.h | 52 ++++++++++++++++++- arch/arm/mach-davinci/irq.c | 83 +++++++++++++++++++++++++++++-- 2 files changed, 129 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h index f4c5ca6da9f4..9b0e412ebc28 100644 --- a/arch/arm/mach-davinci/include/mach/irqs.h +++ b/arch/arm/mach-davinci/include/mach/irqs.h @@ -96,10 +96,60 @@ #define IRQ_EMUINT 63 #define DAVINCI_N_AINTC_IRQ 64 -#define DAVINCI_N_GPIO 71 +#define DAVINCI_N_GPIO 104 #define NR_IRQS (DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO) #define ARCH_TIMER_IRQ IRQ_TINT1_TINT34 +/* DaVinci DM6467-specific Interrupts */ +#define IRQ_DM646X_VP_VERTINT0 0 +#define IRQ_DM646X_VP_VERTINT1 1 +#define IRQ_DM646X_VP_VERTINT2 2 +#define IRQ_DM646X_VP_VERTINT3 3 +#define IRQ_DM646X_VP_ERRINT 4 +#define IRQ_DM646X_RESERVED_1 5 +#define IRQ_DM646X_RESERVED_2 6 +#define IRQ_DM646X_WDINT 7 +#define IRQ_DM646X_CRGENINT0 8 +#define IRQ_DM646X_CRGENINT1 9 +#define IRQ_DM646X_TSIFINT0 10 +#define IRQ_DM646X_TSIFINT1 11 +#define IRQ_DM646X_VDCEINT 12 +#define IRQ_DM646X_USBINT 13 +#define IRQ_DM646X_USBDMAINT 14 +#define IRQ_DM646X_PCIINT 15 +#define IRQ_DM646X_TCERRINT2 20 +#define IRQ_DM646X_TCERRINT3 21 +#define IRQ_DM646X_IDE 22 +#define IRQ_DM646X_HPIINT 23 +#define IRQ_DM646X_EMACRXTHINT 24 +#define IRQ_DM646X_EMACRXINT 25 +#define IRQ_DM646X_EMACTXINT 26 +#define IRQ_DM646X_EMACMISCINT 27 +#define IRQ_DM646X_MCASP0TXINT 28 +#define IRQ_DM646X_MCASP0RXINT 29 +#define IRQ_DM646X_RESERVED_3 31 +#define IRQ_DM646X_MCASP1TXINT 32 +#define IRQ_DM646X_VLQINT 38 +#define IRQ_DM646X_UARTINT2 42 +#define IRQ_DM646X_SPINT0 43 +#define IRQ_DM646X_SPINT1 44 +#define IRQ_DM646X_DSP2ARMINT 45 +#define IRQ_DM646X_RESERVED_4 46 +#define IRQ_DM646X_PSCINT 47 +#define IRQ_DM646X_GPIO0 48 +#define IRQ_DM646X_GPIO1 49 +#define IRQ_DM646X_GPIO2 50 +#define IRQ_DM646X_GPIO3 51 +#define IRQ_DM646X_GPIO4 52 +#define IRQ_DM646X_GPIO5 53 +#define IRQ_DM646X_GPIO6 54 +#define IRQ_DM646X_GPIO7 55 +#define IRQ_DM646X_GPIOBNK0 56 +#define IRQ_DM646X_GPIOBNK1 57 +#define IRQ_DM646X_GPIOBNK2 58 +#define IRQ_DM646X_DDRINT 59 +#define IRQ_DM646X_AEMIFINT 60 + #endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c index e76835cf1018..cf08ef2945eb 100644 --- a/arch/arm/mach-davinci/irq.c +++ b/arch/arm/mach-davinci/irq.c @@ -25,6 +25,7 @@ #include #include +#include #include #define IRQ_BIT(irq) ((irq) & 0x1f) @@ -40,6 +41,8 @@ #define IRQ_INTPRI0_REG_OFFSET 0x0030 #define IRQ_INTPRI7_REG_OFFSET 0x004C +const u8 *davinci_def_priorities; + #define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE) static inline unsigned int davinci_irq_readl(int offset) @@ -110,9 +113,8 @@ static struct irq_chip davinci_irq_chip_0 = { .unmask = davinci_unmask_irq, }; - /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ -static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = { +static const u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = { [IRQ_VDINT0] = 2, [IRQ_VDINT1] = 6, [IRQ_VDINT2] = 6, @@ -179,11 +181,82 @@ static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = { [IRQ_EMUINT] = 7, }; +static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { + [IRQ_DM646X_VP_VERTINT0] = 7, + [IRQ_DM646X_VP_VERTINT1] = 7, + [IRQ_DM646X_VP_VERTINT2] = 7, + [IRQ_DM646X_VP_VERTINT3] = 7, + [IRQ_DM646X_VP_ERRINT] = 7, + [IRQ_DM646X_RESERVED_1] = 7, + [IRQ_DM646X_RESERVED_2] = 7, + [IRQ_DM646X_WDINT] = 7, + [IRQ_DM646X_CRGENINT0] = 7, + [IRQ_DM646X_CRGENINT1] = 7, + [IRQ_DM646X_TSIFINT0] = 7, + [IRQ_DM646X_TSIFINT1] = 7, + [IRQ_DM646X_VDCEINT] = 7, + [IRQ_DM646X_USBINT] = 7, + [IRQ_DM646X_USBDMAINT] = 7, + [IRQ_DM646X_PCIINT] = 7, + [IRQ_CCINT0] = 7, /* dma */ + [IRQ_CCERRINT] = 7, /* dma */ + [IRQ_TCERRINT0] = 7, /* dma */ + [IRQ_TCERRINT] = 7, /* dma */ + [IRQ_DM646X_TCERRINT2] = 7, + [IRQ_DM646X_TCERRINT3] = 7, + [IRQ_DM646X_IDE] = 7, + [IRQ_DM646X_HPIINT] = 7, + [IRQ_DM646X_EMACRXTHINT] = 7, + [IRQ_DM646X_EMACRXINT] = 7, + [IRQ_DM646X_EMACTXINT] = 7, + [IRQ_DM646X_EMACMISCINT] = 7, + [IRQ_DM646X_MCASP0TXINT] = 7, + [IRQ_DM646X_MCASP0RXINT] = 7, + [IRQ_AEMIFINT] = 7, + [IRQ_DM646X_RESERVED_3] = 7, + [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */ + [IRQ_TINT0_TINT34] = 7, /* clocksource */ + [IRQ_TINT1_TINT12] = 7, /* DSP timer */ + [IRQ_TINT1_TINT34] = 7, /* system tick */ + [IRQ_PWMINT0] = 7, + [IRQ_PWMINT1] = 7, + [IRQ_DM646X_VLQINT] = 7, + [IRQ_I2C] = 7, + [IRQ_UARTINT0] = 7, + [IRQ_UARTINT1] = 7, + [IRQ_DM646X_UARTINT2] = 7, + [IRQ_DM646X_SPINT0] = 7, + [IRQ_DM646X_SPINT1] = 7, + [IRQ_DM646X_DSP2ARMINT] = 7, + [IRQ_DM646X_RESERVED_4] = 7, + [IRQ_DM646X_PSCINT] = 7, + [IRQ_DM646X_GPIO0] = 7, + [IRQ_DM646X_GPIO1] = 7, + [IRQ_DM646X_GPIO2] = 7, + [IRQ_DM646X_GPIO3] = 7, + [IRQ_DM646X_GPIO4] = 7, + [IRQ_DM646X_GPIO5] = 7, + [IRQ_DM646X_GPIO6] = 7, + [IRQ_DM646X_GPIO7] = 7, + [IRQ_DM646X_GPIOBNK0] = 7, + [IRQ_DM646X_GPIOBNK1] = 7, + [IRQ_DM646X_GPIOBNK2] = 7, + [IRQ_DM646X_DDRINT] = 7, + [IRQ_DM646X_AEMIFINT] = 7, + [IRQ_COMMTX] = 7, + [IRQ_COMMRX] = 7, + [IRQ_EMUINT] = 7, +}; + /* ARM Interrupt Controller Initialization */ void __init davinci_irq_init(void) { unsigned i; - const u8 *priority = default_priorities; + + if (cpu_is_davinci_dm644x()) + davinci_def_priorities = dm644x_default_priorities; + else if (cpu_is_davinci_dm646x()) + davinci_def_priorities = dm646x_default_priorities; /* Clear all interrupt requests */ davinci_irq_writel(~0x0, FIQ_REG0_OFFSET); @@ -211,8 +284,8 @@ void __init davinci_irq_init(void) unsigned j; u32 pri; - for (j = 0, pri = 0; j < 32; j += 4, priority++) - pri |= (*priority & 0x07) << j; + for (j = 0, pri = 0; j < 32; j += 4, davinci_def_priorities++) + pri |= (*davinci_def_priorities & 0x07) << j; davinci_irq_writel(pri, i); } -- cgit v1.2.2 From f9337405b21bafb1c1a24316b3e43b3d3d697925 Mon Sep 17 00:00:00 2001 From: "s-paulraj@ti.com" Date: Thu, 18 Sep 2008 15:35:00 -0400 Subject: davinci: DM355 IRQ Definitions Adding IRQ defintions for DaVinci DM355 and default interrupt priorities for DM355 Signed-off-by: Sandeep Paulraj Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/include/mach/irqs.h | 51 +++++++++++++++++++++++ arch/arm/mach-davinci/irq.c | 67 +++++++++++++++++++++++++++++++ 2 files changed, 118 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h index 9b0e412ebc28..18066074c995 100644 --- a/arch/arm/mach-davinci/include/mach/irqs.h +++ b/arch/arm/mach-davinci/include/mach/irqs.h @@ -152,4 +152,55 @@ #define IRQ_DM646X_DDRINT 59 #define IRQ_DM646X_AEMIFINT 60 +/* DaVinci DM355-specific Interrupts */ +#define IRQ_DM355_CCDC_VDINT0 0 +#define IRQ_DM355_CCDC_VDINT1 1 +#define IRQ_DM355_CCDC_VDINT2 2 +#define IRQ_DM355_IPIPE_HST 3 +#define IRQ_DM355_H3AINT 4 +#define IRQ_DM355_IPIPE_SDR 5 +#define IRQ_DM355_IPIPEIFINT 6 +#define IRQ_DM355_OSDINT 7 +#define IRQ_DM355_VENCINT 8 +#define IRQ_DM355_IMCOPINT 11 +#define IRQ_DM355_RTOINT 13 +#define IRQ_DM355_TINT4 13 +#define IRQ_DM355_TINT2_TINT12 13 +#define IRQ_DM355_UARTINT2 14 +#define IRQ_DM355_TINT5 14 +#define IRQ_DM355_TINT2_TINT34 14 +#define IRQ_DM355_TINT6 15 +#define IRQ_DM355_TINT3_TINT12 15 +#define IRQ_DM355_SPINT1_0 17 +#define IRQ_DM355_SPINT1_1 18 +#define IRQ_DM355_SPINT2_0 19 +#define IRQ_DM355_SPINT2_1 21 +#define IRQ_DM355_TINT7 22 +#define IRQ_DM355_TINT3_TINT34 22 +#define IRQ_DM355_SDIOINT0 23 +#define IRQ_DM355_MMCINT0 26 +#define IRQ_DM355_MSINT 26 +#define IRQ_DM355_MMCINT1 27 +#define IRQ_DM355_PWMINT3 28 +#define IRQ_DM355_SDIOINT1 31 +#define IRQ_DM355_SPINT0_0 42 +#define IRQ_DM355_SPINT0_1 43 +#define IRQ_DM355_GPIO0 44 +#define IRQ_DM355_GPIO1 45 +#define IRQ_DM355_GPIO2 46 +#define IRQ_DM355_GPIO3 47 +#define IRQ_DM355_GPIO4 48 +#define IRQ_DM355_GPIO5 49 +#define IRQ_DM355_GPIO6 50 +#define IRQ_DM355_GPIO7 51 +#define IRQ_DM355_GPIO8 52 +#define IRQ_DM355_GPIO9 53 +#define IRQ_DM355_GPIOBNK0 54 +#define IRQ_DM355_GPIOBNK1 55 +#define IRQ_DM355_GPIOBNK2 56 +#define IRQ_DM355_GPIOBNK3 57 +#define IRQ_DM355_GPIOBNK4 58 +#define IRQ_DM355_GPIOBNK5 59 +#define IRQ_DM355_GPIOBNK6 60 + #endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c index cf08ef2945eb..5a324c90e291 100644 --- a/arch/arm/mach-davinci/irq.c +++ b/arch/arm/mach-davinci/irq.c @@ -248,6 +248,71 @@ static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { [IRQ_EMUINT] = 7, }; +static const u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = { + [IRQ_DM355_CCDC_VDINT0] = 2, + [IRQ_DM355_CCDC_VDINT1] = 6, + [IRQ_DM355_CCDC_VDINT2] = 6, + [IRQ_DM355_IPIPE_HST] = 6, + [IRQ_DM355_H3AINT] = 6, + [IRQ_DM355_IPIPE_SDR] = 6, + [IRQ_DM355_IPIPEIFINT] = 6, + [IRQ_DM355_OSDINT] = 7, + [IRQ_DM355_VENCINT] = 6, + [IRQ_ASQINT] = 6, + [IRQ_IMXINT] = 6, + [IRQ_USBINT] = 4, + [IRQ_DM355_RTOINT] = 4, + [IRQ_DM355_UARTINT2] = 7, + [IRQ_DM355_TINT6] = 7, + [IRQ_CCINT0] = 5, /* dma */ + [IRQ_CCERRINT] = 5, /* dma */ + [IRQ_TCERRINT0] = 5, /* dma */ + [IRQ_TCERRINT] = 5, /* dma */ + [IRQ_DM355_SPINT2_1] = 7, + [IRQ_DM355_TINT7] = 4, + [IRQ_DM355_SDIOINT0] = 7, + [IRQ_MBXINT] = 7, + [IRQ_MBRINT] = 7, + [IRQ_MMCINT] = 7, + [IRQ_DM355_MMCINT1] = 7, + [IRQ_DM355_PWMINT3] = 7, + [IRQ_DDRINT] = 7, + [IRQ_AEMIFINT] = 7, + [IRQ_DM355_SDIOINT1] = 4, + [IRQ_TINT0_TINT12] = 2, /* clockevent */ + [IRQ_TINT0_TINT34] = 2, /* clocksource */ + [IRQ_TINT1_TINT12] = 7, /* DSP timer */ + [IRQ_TINT1_TINT34] = 7, /* system tick */ + [IRQ_PWMINT0] = 7, + [IRQ_PWMINT1] = 7, + [IRQ_PWMINT2] = 7, + [IRQ_I2C] = 3, + [IRQ_UARTINT0] = 3, + [IRQ_UARTINT1] = 3, + [IRQ_DM355_SPINT0_0] = 3, + [IRQ_DM355_SPINT0_1] = 3, + [IRQ_DM355_GPIO0] = 3, + [IRQ_DM355_GPIO1] = 7, + [IRQ_DM355_GPIO2] = 4, + [IRQ_DM355_GPIO3] = 4, + [IRQ_DM355_GPIO4] = 7, + [IRQ_DM355_GPIO5] = 7, + [IRQ_DM355_GPIO6] = 7, + [IRQ_DM355_GPIO7] = 7, + [IRQ_DM355_GPIO8] = 7, + [IRQ_DM355_GPIO9] = 7, + [IRQ_DM355_GPIOBNK0] = 7, + [IRQ_DM355_GPIOBNK1] = 7, + [IRQ_DM355_GPIOBNK2] = 7, + [IRQ_DM355_GPIOBNK3] = 7, + [IRQ_DM355_GPIOBNK4] = 7, + [IRQ_DM355_GPIOBNK5] = 7, + [IRQ_DM355_GPIOBNK6] = 7, + [IRQ_COMMTX] = 7, + [IRQ_COMMRX] = 7, + [IRQ_EMUINT] = 7, +}; + /* ARM Interrupt Controller Initialization */ void __init davinci_irq_init(void) { @@ -257,6 +322,8 @@ void __init davinci_irq_init(void) davinci_def_priorities = dm644x_default_priorities; else if (cpu_is_davinci_dm646x()) davinci_def_priorities = dm646x_default_priorities; + else if (cpu_is_davinci_dm355()) + davinci_def_priorities = dm355_default_priorities; /* Clear all interrupt requests */ davinci_irq_writel(~0x0, FIQ_REG0_OFFSET); -- cgit v1.2.2 From 617b925f94e0126841164ffd40dd3a8879502b57 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 14 Apr 2009 08:04:26 -0500 Subject: davinci: serial: generalize for more SoCs Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/include/mach/serial.h | 21 ++++++- arch/arm/mach-davinci/serial.c | 95 +++++++++++++++++++++++------ 2 files changed, 96 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index fb8cb229bfd2..632847d74a1c 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -13,8 +13,23 @@ #include -#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) -#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) -#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) +#define DAVINCI_MAX_NR_UARTS 3 +#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) +#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) +#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) + +#define DM355_UART2_BASE (IO_PHYS + 0x206000) + +/* DaVinci UART register offsets */ +#define UART_DAVINCI_PWREMU 0x0c +#define UART_DM646X_SCR 0x10 +#define UART_DM646X_SCR_TX_WATERMARK 0x08 + +struct davinci_uart_config { + /* Bit field of UARTs present; bit 0 --> UART1 */ + unsigned int enabled_uarts; +}; + +extern void davinci_serial_init(struct davinci_uart_config *); #endif /* __ASM_ARCH_SERIAL_H */ diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c index 3010f9971255..695075796522 100644 --- a/arch/arm/mach-davinci/serial.c +++ b/arch/arm/mach-davinci/serial.c @@ -32,32 +32,47 @@ #include #include #include +#include +#include "clock.h" -#define UART_DAVINCI_PWREMU 0x0c - -static inline unsigned int davinci_serial_in(struct plat_serial8250_port *up, - int offset) +static inline unsigned int serial_read_reg(struct plat_serial8250_port *up, + int offset) { offset <<= up->regshift; - return (unsigned int)__raw_readb(up->membase + offset); + return (unsigned int)__raw_readl(IO_ADDRESS(up->mapbase) + offset); } -static inline void davinci_serial_outp(struct plat_serial8250_port *p, - int offset, int value) +static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, + int value) { offset <<= p->regshift; - __raw_writeb(value, p->membase + offset); + __raw_writel(value, IO_ADDRESS(p->mapbase) + offset); } static struct plat_serial8250_port serial_platform_data[] = { { - .membase = (char *)IO_ADDRESS(DAVINCI_UART0_BASE), - .mapbase = (unsigned long)DAVINCI_UART0_BASE, + .mapbase = DAVINCI_UART0_BASE, .irq = IRQ_UARTINT0, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART1_BASE, + .irq = IRQ_UARTINT1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART2_BASE, + .irq = IRQ_UARTINT2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 2, - .uartclk = 27000000, }, { .flags = 0 @@ -74,22 +89,68 @@ static struct platform_device serial_device = { static void __init davinci_serial_reset(struct plat_serial8250_port *p) { - /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */ unsigned int pwremu = 0; - davinci_serial_outp(p, UART_IER, 0); /* disable all interrupts */ + serial_write_reg(p, UART_IER, 0); /* disable all interrupts */ - davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu); + /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */ + serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu); mdelay(10); pwremu |= (0x3 << 13); pwremu |= 0x1; - davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu); + serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu); + + if (cpu_is_davinci_dm646x()) + serial_write_reg(p, UART_DM646X_SCR, + UART_DM646X_SCR_TX_WATERMARK); +} + +void __init davinci_serial_init(struct davinci_uart_config *info) +{ + int i; + char name[16]; + struct clk *uart_clk; + struct device *dev = &serial_device.dev; + + /* + * Make sure the serial ports are muxed on at this point. + * You have to mux them off in device drivers later on + * if not needed. + */ + for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++) { + struct plat_serial8250_port *p = serial_platform_data + i; + + if (!(info->enabled_uarts & (1 << i))) { + p->flags = 0; + continue; + } + + if (cpu_is_davinci_dm646x()) + p->iotype = UPIO_MEM32; + + if (cpu_is_davinci_dm355()) { + if (i == 2) { + p->mapbase = (unsigned long)DM355_UART2_BASE; + p->irq = IRQ_DM355_UARTINT2; + } + } + + sprintf(name, "uart%d", i); + uart_clk = clk_get(dev, name); + if (IS_ERR(uart_clk)) + printk(KERN_ERR "%s:%d: failed to get UART%d clock\n", + __func__, __LINE__, i); + else { + clk_enable(uart_clk); + p->uartclk = clk_get_rate(uart_clk); + davinci_serial_reset(p); + } + } } static int __init davinci_init(void) { - davinci_serial_reset(&serial_platform_data[0]); return platform_device_register(&serial_device); } -- cgit v1.2.2 From 5526b3f7e3317bdd0dcc0483214935ae64236efb Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 14 Apr 2009 09:50:37 -0500 Subject: davinci: update pin-multiplexing support Update MUX support to be more general and useful across multiple SoCs in the DaVinci family. Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/Kconfig | 26 ++++ arch/arm/mach-davinci/Makefile | 4 +- arch/arm/mach-davinci/devices.c | 5 + arch/arm/mach-davinci/include/mach/mux.h | 220 ++++++++++++++++++++++++------- arch/arm/mach-davinci/mux.c | 99 +++++++++++--- arch/arm/mach-davinci/mux.h | 51 +++++++ 6 files changed, 339 insertions(+), 66 deletions(-) create mode 100644 arch/arm/mach-davinci/mux.h (limited to 'arch') diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index af886734c73b..f18090e78e30 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -18,6 +18,32 @@ config MACH_DAVINCI_EVM Configure this option to specify the whether the board used for development is a DaVinci EVM + +config DAVINCI_MUX + bool "DAVINCI multiplexing support" + depends on ARCH_DAVINCI + default y + help + Pin multiplexing support for DAVINCI boards. If your bootloader + sets the multiplexing correctly, say N. Otherwise, or if unsure, + say Y. + +config DAVINCI_MUX_DEBUG + bool "Multiplexing debug output" + depends on DAVINCI_MUX + help + Makes the multiplexing functions print out a lot of debug info. + This is useful if you want to find out the correct values of the + multiplexing registers. + +config DAVINCI_MUX_WARNINGS + bool "Warn about pins the bootloader didn't set up" + depends on DAVINCI_MUX + help + Choose Y here to warn whenever driver initialization logic needs + to change the pin multiplexing setup. When there are no warnings + printed, it's safe to deselect DAVINCI_MUX for your product. + config DAVINCI_RESET_CLOCKS bool "Reset unused clocks during boot" depends on ARCH_DAVINCI diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 3ee3d73d9566..b27871af4fcf 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -5,7 +5,9 @@ # Common objects obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \ - gpio.o mux.o devices.o dma.o usb.o + gpio.o devices.o dma.o usb.o + +obj-$(CONFIG_DAVINCI_MUX) += mux.o # Board specific obj-$(CONFIG_MACH_DAVINCI_EVM) += board-evm.o diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 3ea6d477f06b..a31370b93dd2 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -21,6 +21,8 @@ #include #include #include +#include +#include #define DAVINCI_I2C_BASE 0x01C21000 @@ -45,6 +47,9 @@ static struct platform_device davinci_i2c_device = { void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata) { + if (cpu_is_davinci_dm644x()) + davinci_cfg_reg(DM644X_I2C); + davinci_i2c_device.dev.platform_data = pdata; (void) platform_device_register(&davinci_i2c_device); } diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index c24b6782804d..bae22cb3e27b 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -1,55 +1,183 @@ /* - * DaVinci pin multiplexing defines + * Table of the DAVINCI register configurations for the PINMUX combinations * * Author: Vladimir Barinov, MontaVista Software, Inc. * + * Based on linux/include/asm-arm/arch-omap/mux.h: + * Copyright (C) 2003 - 2005 Nokia Corporation + * + * Written by Tony Lindgren + * * 2007 (c) MontaVista Software, Inc. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. + * + * Copyright (C) 2008 Texas Instruments. */ -#ifndef __ASM_ARCH_MUX_H -#define __ASM_ARCH_MUX_H - -#define DAVINCI_MUX_AEAW0 0 -#define DAVINCI_MUX_AEAW1 1 -#define DAVINCI_MUX_AEAW2 2 -#define DAVINCI_MUX_AEAW3 3 -#define DAVINCI_MUX_AEAW4 4 -#define DAVINCI_MUX_AECS4 10 -#define DAVINCI_MUX_AECS5 11 -#define DAVINCI_MUX_VLYNQWD0 12 -#define DAVINCI_MUX_VLYNQWD1 13 -#define DAVINCI_MUX_VLSCREN 14 -#define DAVINCI_MUX_VLYNQEN 15 -#define DAVINCI_MUX_HDIREN 16 -#define DAVINCI_MUX_ATAEN 17 -#define DAVINCI_MUX_RGB666 22 -#define DAVINCI_MUX_RGB888 23 -#define DAVINCI_MUX_LOEEN 24 -#define DAVINCI_MUX_LFLDEN 25 -#define DAVINCI_MUX_CWEN 26 -#define DAVINCI_MUX_CFLDEN 27 -#define DAVINCI_MUX_HPIEN 29 -#define DAVINCI_MUX_1394EN 30 -#define DAVINCI_MUX_EMACEN 31 - -#define DAVINCI_MUX_LEVEL2 32 -#define DAVINCI_MUX_UART0 (DAVINCI_MUX_LEVEL2 + 0) -#define DAVINCI_MUX_UART1 (DAVINCI_MUX_LEVEL2 + 1) -#define DAVINCI_MUX_UART2 (DAVINCI_MUX_LEVEL2 + 2) -#define DAVINCI_MUX_U2FLO (DAVINCI_MUX_LEVEL2 + 3) -#define DAVINCI_MUX_PWM0 (DAVINCI_MUX_LEVEL2 + 4) -#define DAVINCI_MUX_PWM1 (DAVINCI_MUX_LEVEL2 + 5) -#define DAVINCI_MUX_PWM2 (DAVINCI_MUX_LEVEL2 + 6) -#define DAVINCI_MUX_I2C (DAVINCI_MUX_LEVEL2 + 7) -#define DAVINCI_MUX_SPI (DAVINCI_MUX_LEVEL2 + 8) -#define DAVINCI_MUX_MSTK (DAVINCI_MUX_LEVEL2 + 9) -#define DAVINCI_MUX_ASP (DAVINCI_MUX_LEVEL2 + 10) -#define DAVINCI_MUX_CLK0 (DAVINCI_MUX_LEVEL2 + 16) -#define DAVINCI_MUX_CLK1 (DAVINCI_MUX_LEVEL2 + 17) -#define DAVINCI_MUX_TIMIN (DAVINCI_MUX_LEVEL2 + 18) - -extern void davinci_mux_peripheral(unsigned int mux, unsigned int enable); - -#endif /* __ASM_ARCH_MUX_H */ + +#ifndef __INC_MACH_MUX_H +#define __INC_MACH_MUX_H + +/* System module registers */ +#define PINMUX0 0x00 +#define PINMUX1 0x04 +/* dm355 only */ +#define PINMUX2 0x08 +#define PINMUX3 0x0c +#define PINMUX4 0x10 +#define INTMUX 0x18 +#define EVTMUX 0x1c + +struct mux_config { + const char *name; + const char *mux_reg_name; + const unsigned char mux_reg; + const unsigned char mask_offset; + const unsigned char mask; + const unsigned char mode; + bool debug; +}; + +enum davinci_dm644x_index { + /* ATA and HDDIR functions */ + DM644X_HDIREN, + DM644X_ATAEN, + DM644X_ATAEN_DISABLE, + + /* HPI functions */ + DM644X_HPIEN_DISABLE, + + /* AEAW functions */ + DM644X_AEAW, + + /* Memory Stick */ + DM644X_MSTK, + + /* I2C */ + DM644X_I2C, + + /* ASP function */ + DM644X_MCBSP, + + /* UART1 */ + DM644X_UART1, + + /* UART2 */ + DM644X_UART2, + + /* PWM0 */ + DM644X_PWM0, + + /* PWM1 */ + DM644X_PWM1, + + /* PWM2 */ + DM644X_PWM2, + + /* VLYNQ function */ + DM644X_VLYNQEN, + DM644X_VLSCREN, + DM644X_VLYNQWD, + + /* EMAC and MDIO function */ + DM644X_EMACEN, + + /* GPIO3V[0:16] pins */ + DM644X_GPIO3V, + + /* GPIO pins */ + DM644X_GPIO0, + DM644X_GPIO3, + DM644X_GPIO43_44, + DM644X_GPIO46_47, + + /* VPBE */ + DM644X_RGB666, + + /* LCD */ + DM644X_LOEEN, + DM644X_LFLDEN, +}; + +enum davinci_dm646x_index { + /* ATA function */ + DM646X_ATAEN, + + /* AUDIO Clock */ + DM646X_AUDCK1, + DM646X_AUDCK0, + + /* CRGEN Control */ + DM646X_CRGMUX, + + /* VPIF Control */ + DM646X_STSOMUX_DISABLE, + DM646X_STSIMUX_DISABLE, + DM646X_PTSOMUX_DISABLE, + DM646X_PTSIMUX_DISABLE, + + /* TSIF Control */ + DM646X_STSOMUX, + DM646X_STSIMUX, + DM646X_PTSOMUX_PARALLEL, + DM646X_PTSIMUX_PARALLEL, + DM646X_PTSOMUX_SERIAL, + DM646X_PTSIMUX_SERIAL, +}; + +enum davinci_dm355_index { + /* MMC/SD 0 */ + DM355_MMCSD0, + + /* MMC/SD 1 */ + DM355_SD1_CLK, + DM355_SD1_CMD, + DM355_SD1_DATA3, + DM355_SD1_DATA2, + DM355_SD1_DATA1, + DM355_SD1_DATA0, + + /* I2C */ + DM355_I2C_SDA, + DM355_I2C_SCL, + + /* ASP0 function */ + DM355_MCBSP0_BDX, + DM355_MCBSP0_X, + DM355_MCBSP0_BFSX, + DM355_MCBSP0_BDR, + DM355_MCBSP0_R, + DM355_MCBSP0_BFSR, + + /* SPI0 */ + DM355_SPI0_SDI, + DM355_SPI0_SDENA0, + DM355_SPI0_SDENA1, + + /* IRQ muxing */ + DM355_INT_EDMA_CC, + DM355_INT_EDMA_TC0_ERR, + DM355_INT_EDMA_TC1_ERR, + + /* EDMA event muxing */ + DM355_EVT8_ASP1_TX, + DM355_EVT9_ASP1_RX, + DM355_EVT26_MMC0_RX, +}; + +#ifdef CONFIG_DAVINCI_MUX +/* setup pin muxing */ +extern void davinci_mux_init(void); +extern int davinci_mux_register(const struct mux_config *pins, + unsigned long size); +extern int davinci_cfg_reg(unsigned long reg_cfg); +#else +/* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */ +static inline void davinci_mux_init(void) {} +static inline int davinci_mux_register(const struct mux_config *pins, + unsigned long size) { return 0; } +static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; } +#endif + +#endif /* __INC_MACH_MUX_H */ diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c index 53734dee1f93..bbba0b247a44 100644 --- a/arch/arm/mach-davinci/mux.c +++ b/arch/arm/mach-davinci/mux.c @@ -1,42 +1,103 @@ /* - * DaVinci pin multiplexing configurations + * Utility to set the DAVINCI MUX register from a table in mux.h * * Author: Vladimir Barinov, MontaVista Software, Inc. * + * Based on linux/arch/arm/plat-omap/mux.c: + * Copyright (C) 2003 - 2005 Nokia Corporation + * + * Written by Tony Lindgren + * * 2007 (c) MontaVista Software, Inc. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. + * + * Copyright (C) 2008 Texas Instruments. */ #include +#include #include #include - #include -/* System control register offsets */ -#define PINMUX0 0x00 -#define PINMUX1 0x04 +static const struct mux_config *mux_table; +static unsigned long pin_table_sz; + +int __init davinci_mux_register(const struct mux_config *pins, + unsigned long size) +{ + mux_table = pins; + pin_table_sz = size; -static DEFINE_SPINLOCK(mux_lock); + return 0; +} -void davinci_mux_peripheral(unsigned int mux, unsigned int enable) +/* + * Sets the DAVINCI MUX register based on the table + */ +int __init_or_module davinci_cfg_reg(const unsigned long index) { + static DEFINE_SPINLOCK(mux_spin_lock); void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE); - u32 pinmux, muxreg = PINMUX0; + unsigned long flags; + const struct mux_config *cfg; + unsigned int reg_orig = 0, reg = 0; + unsigned int mask, warn = 0; + + if (!mux_table) + BUG(); + + if (index >= pin_table_sz) { + printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n", + index, pin_table_sz); + dump_stack(); + return -ENODEV; + } + + cfg = &mux_table[index]; + + if (cfg->name == NULL) { + printk(KERN_ERR "No entry for the specified index\n"); + return -ENODEV; + } + + /* Update the mux register in question */ + if (cfg->mask) { + unsigned tmp1, tmp2; + + spin_lock_irqsave(&mux_spin_lock, flags); + reg_orig = __raw_readl(base + cfg->mux_reg); + + mask = (cfg->mask << cfg->mask_offset); + tmp1 = reg_orig & mask; + reg = reg_orig & ~mask; + + tmp2 = (cfg->mode << cfg->mask_offset); + reg |= tmp2; + + if (tmp1 != tmp2) + warn = 1; + + __raw_writel(reg, base + cfg->mux_reg); + spin_unlock_irqrestore(&mux_spin_lock, flags); + } + + if (warn) { +#ifdef CONFIG_DAVINCI_MUX_WARNINGS + printk(KERN_WARNING "MUX: initialized %s\n", cfg->name); +#endif + } - if (mux >= DAVINCI_MUX_LEVEL2) { - muxreg = PINMUX1; - mux -= DAVINCI_MUX_LEVEL2; +#ifdef CONFIG_DAVINCI_MUX_DEBUG + if (cfg->debug || warn) { + printk(KERN_WARNING "MUX: Setting register %s\n", cfg->name); + printk(KERN_WARNING " %s (0x%08x) = 0x%08x -> 0x%08x\n", + cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg); } +#endif - spin_lock(&mux_lock); - pinmux = __raw_readl(base + muxreg); - if (enable) - pinmux |= (1 << mux); - else - pinmux &= ~(1 << mux); - __raw_writel(pinmux, base + muxreg); - spin_unlock(&mux_lock); + return 0; } +EXPORT_SYMBOL(davinci_cfg_reg); diff --git a/arch/arm/mach-davinci/mux.h b/arch/arm/mach-davinci/mux.h new file mode 100644 index 000000000000..adc869413371 --- /dev/null +++ b/arch/arm/mach-davinci/mux.h @@ -0,0 +1,51 @@ +/* + * Pin-multiplex helper macros for TI DaVinci family devices + * + * Author: Vladimir Barinov, MontaVista Software, Inc. + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Copyright (C) 2008 Texas Instruments. + */ +#ifndef _MACH_DAVINCI_MUX_H_ +#define _MACH_DAVINCI_MUX_H_ + +#include + +#define MUX_CFG(soc, desc, muxreg, mode_offset, mode_mask, mux_mode, dbg)\ +[soc##_##desc] = { \ + .name = #desc, \ + .debug = dbg, \ + .mux_reg_name = "PINMUX"#muxreg, \ + .mux_reg = PINMUX##muxreg, \ + .mask_offset = mode_offset, \ + .mask = mode_mask, \ + .mode = mux_mode, \ + }, + +#define INT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \ +[soc##_##desc] = { \ + .name = #desc, \ + .debug = dbg, \ + .mux_reg_name = "INTMUX", \ + .mux_reg = INTMUX, \ + .mask_offset = mode_offset, \ + .mask = mode_mask, \ + .mode = mux_mode, \ + }, + +#define EVT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \ +[soc##_##desc] = { \ + .name = #desc, \ + .debug = dbg, \ + .mux_reg_name = "EVTMUX", \ + .mux_reg = EVTMUX, \ + .mask_offset = mode_offset, \ + .mask = mode_mask, \ + .mode = mux_mode, \ + }, + +#endif /* _MACH_DAVINCI_MUX_H */ -- cgit v1.2.2 From 73d3c68f09e608be983013dc8b3e49aebe89298c Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 14 Apr 2009 10:57:40 -0500 Subject: davinci: DM644x: rename board file Rename DM6446 EVM board file, no functional changes. Code is updated and reworked in following patch. Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-dm644x-evm.c | 440 +++++++++++++++++++++++++++++++ arch/arm/mach-davinci/board-evm.c | 440 ------------------------------- 2 files changed, 440 insertions(+), 440 deletions(-) create mode 100644 arch/arm/mach-davinci/board-dm644x-evm.c delete mode 100644 arch/arm/mach-davinci/board-evm.c (limited to 'arch') diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c new file mode 100644 index 000000000000..c2701d740a1d --- /dev/null +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -0,0 +1,440 @@ +/* + * TI DaVinci EVM board support + * + * Author: Kevin Hilman, MontaVista Software, Inc. + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +#include +#include +#include + +#define DAVINCI_CFC_ATA_BASE 0x01C66000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 + +/* other misc. init functions */ +void __init davinci_psc_init(void); +void __init davinci_irq_init(void); +void __init davinci_map_common_io(void); +void __init davinci_init_common_hw(void); + +#if defined(CONFIG_MTD_PHYSMAP) || \ + defined(CONFIG_MTD_PHYSMAP_MODULE) + +static struct mtd_partition davinci_evm_norflash_partitions[] = { + /* bootloader (U-Boot, etc) in first 4 sectors */ + { + .name = "bootloader", + .offset = 0, + .size = 4 * SZ_64K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* bootloader params in the next 1 sectors */ + { + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = SZ_64K, + .mask_flags = 0, + }, + /* kernel */ + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M, + .mask_flags = 0 + }, + /* file system */ + { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0 + } +}; + +static struct physmap_flash_data davinci_evm_norflash_data = { + .width = 2, + .parts = davinci_evm_norflash_partitions, + .nr_parts = ARRAY_SIZE(davinci_evm_norflash_partitions), +}; + +/* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF + * limits addresses to 16M, so using addresses past 16M will wrap */ +static struct resource davinci_evm_norflash_resource = { + .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, + .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device davinci_evm_norflash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &davinci_evm_norflash_data, + }, + .num_resources = 1, + .resource = &davinci_evm_norflash_resource, +}; + +#endif + +#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ + defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) + +static struct resource ide_resources[] = { + { + .start = DAVINCI_CFC_ATA_BASE, + .end = DAVINCI_CFC_ATA_BASE + 0x7ff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_IDE, + .end = IRQ_IDE, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 ide_dma_mask = DMA_BIT_MASK(32); + +static struct platform_device ide_dev = { + .name = "palm_bk3710", + .id = -1, + .resource = ide_resources, + .num_resources = ARRAY_SIZE(ide_resources), + .dev = { + .dma_mask = &ide_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +#endif + +/*----------------------------------------------------------------------*/ + +/* + * I2C GPIO expanders + */ + +#define PCF_Uxx_BASE(x) (DAVINCI_N_GPIO + ((x) * 8)) + + +/* U2 -- LEDs */ + +static struct gpio_led evm_leds[] = { + { .name = "DS8", .active_low = 1, + .default_trigger = "heartbeat", }, + { .name = "DS7", .active_low = 1, }, + { .name = "DS6", .active_low = 1, }, + { .name = "DS5", .active_low = 1, }, + { .name = "DS4", .active_low = 1, }, + { .name = "DS3", .active_low = 1, }, + { .name = "DS2", .active_low = 1, + .default_trigger = "mmc0", }, + { .name = "DS1", .active_low = 1, + .default_trigger = "ide-disk", }, +}; + +static const struct gpio_led_platform_data evm_led_data = { + .num_leds = ARRAY_SIZE(evm_leds), + .leds = evm_leds, +}; + +static struct platform_device *evm_led_dev; + +static int +evm_led_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) +{ + struct gpio_led *leds = evm_leds; + int status; + + while (ngpio--) { + leds->gpio = gpio++; + leds++; + } + + /* what an extremely annoying way to be forced to handle + * device unregistration ... + */ + evm_led_dev = platform_device_alloc("leds-gpio", 0); + platform_device_add_data(evm_led_dev, + &evm_led_data, sizeof evm_led_data); + + evm_led_dev->dev.parent = &client->dev; + status = platform_device_add(evm_led_dev); + if (status < 0) { + platform_device_put(evm_led_dev); + evm_led_dev = NULL; + } + return status; +} + +static int +evm_led_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) +{ + if (evm_led_dev) { + platform_device_unregister(evm_led_dev); + evm_led_dev = NULL; + } + return 0; +} + +static struct pcf857x_platform_data pcf_data_u2 = { + .gpio_base = PCF_Uxx_BASE(0), + .setup = evm_led_setup, + .teardown = evm_led_teardown, +}; + + +/* U18 - A/V clock generator and user switch */ + +static int sw_gpio; + +static ssize_t +sw_show(struct device *d, struct device_attribute *a, char *buf) +{ + char *s = gpio_get_value_cansleep(sw_gpio) ? "on\n" : "off\n"; + + strcpy(buf, s); + return strlen(s); +} + +static DEVICE_ATTR(user_sw, S_IRUGO, sw_show, NULL); + +static int +evm_u18_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) +{ + int status; + + /* export dip switch option */ + sw_gpio = gpio + 7; + status = gpio_request(sw_gpio, "user_sw"); + if (status == 0) + status = gpio_direction_input(sw_gpio); + if (status == 0) + status = device_create_file(&client->dev, &dev_attr_user_sw); + else + gpio_free(sw_gpio); + if (status != 0) + sw_gpio = -EINVAL; + + /* audio PLL: 48 kHz (vs 44.1 or 32), single rate (vs double) */ + gpio_request(gpio + 3, "pll_fs2"); + gpio_direction_output(gpio + 3, 0); + + gpio_request(gpio + 2, "pll_fs1"); + gpio_direction_output(gpio + 2, 0); + + gpio_request(gpio + 1, "pll_sr"); + gpio_direction_output(gpio + 1, 0); + + return 0; +} + +static int +evm_u18_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) +{ + gpio_free(gpio + 1); + gpio_free(gpio + 2); + gpio_free(gpio + 3); + + if (sw_gpio > 0) { + device_remove_file(&client->dev, &dev_attr_user_sw); + gpio_free(sw_gpio); + } + return 0; +} + +static struct pcf857x_platform_data pcf_data_u18 = { + .gpio_base = PCF_Uxx_BASE(1), + .n_latch = (1 << 3) | (1 << 2) | (1 << 1), + .setup = evm_u18_setup, + .teardown = evm_u18_teardown, +}; + + +/* U35 - various I/O signals used to manage USB, CF, ATA, etc */ + +static int +evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) +{ + /* p0 = nDRV_VBUS (initial: don't supply it) */ + gpio_request(gpio + 0, "nDRV_VBUS"); + gpio_direction_output(gpio + 0, 1); + + /* p1 = VDDIMX_EN */ + gpio_request(gpio + 1, "VDDIMX_EN"); + gpio_direction_output(gpio + 1, 1); + + /* p2 = VLYNQ_EN */ + gpio_request(gpio + 2, "VLYNQ_EN"); + gpio_direction_output(gpio + 2, 1); + + /* p3 = n3V3_CF_RESET (initial: stay in reset) */ + gpio_request(gpio + 3, "nCF_RESET"); + gpio_direction_output(gpio + 3, 0); + + /* (p4 unused) */ + + /* p5 = 1V8_WLAN_RESET (initial: stay in reset) */ + gpio_request(gpio + 5, "WLAN_RESET"); + gpio_direction_output(gpio + 5, 1); + + /* p6 = nATA_SEL (initial: select) */ + gpio_request(gpio + 6, "nATA_SEL"); + gpio_direction_output(gpio + 6, 0); + + /* p7 = nCF_SEL (initial: deselect) */ + gpio_request(gpio + 7, "nCF_SEL"); + gpio_direction_output(gpio + 7, 1); + + /* irlml6401 sustains over 3A, switches 5V in under 8 msec */ + setup_usb(500, 8); + + return 0; +} + +static int +evm_u35_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) +{ + gpio_free(gpio + 7); + gpio_free(gpio + 6); + gpio_free(gpio + 5); + gpio_free(gpio + 3); + gpio_free(gpio + 2); + gpio_free(gpio + 1); + gpio_free(gpio + 0); + return 0; +} + +static struct pcf857x_platform_data pcf_data_u35 = { + .gpio_base = PCF_Uxx_BASE(2), + .setup = evm_u35_setup, + .teardown = evm_u35_teardown, +}; + +/*----------------------------------------------------------------------*/ + +/* Most of this EEPROM is unused, but U-Boot uses some data: + * - 0x7f00, 6 bytes Ethernet Address + * - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL) + * - ... newer boards may have more + */ +static struct at24_platform_data eeprom_info = { + .byte_len = (256*1024) / 8, + .page_size = 64, + .flags = AT24_FLAG_ADDR16, +}; + +static struct i2c_board_info __initdata i2c_info[] = { + { + I2C_BOARD_INFO("pcf8574", 0x38), + .platform_data = &pcf_data_u2, + }, + { + I2C_BOARD_INFO("pcf8574", 0x39), + .platform_data = &pcf_data_u18, + }, + { + I2C_BOARD_INFO("pcf8574", 0x3a), + .platform_data = &pcf_data_u35, + }, + { + I2C_BOARD_INFO("24c256", 0x50), + .platform_data = &eeprom_info, + }, + /* ALSO: + * - tvl320aic33 audio codec (0x1b) + * - msp430 microcontroller (0x23) + * - tvp5146 video decoder (0x5d) + */ +}; + +/* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz), + * which requires 100 usec of idle bus after i2c writes sent to it. + */ +static struct davinci_i2c_platform_data i2c_pdata = { + .bus_freq = 20 /* kHz */, + .bus_delay = 100 /* usec */, +}; + +static void __init evm_init_i2c(void) +{ + davinci_init_i2c(&i2c_pdata); + i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); +} + +static struct platform_device *davinci_evm_devices[] __initdata = { +#if defined(CONFIG_MTD_PHYSMAP) || \ + defined(CONFIG_MTD_PHYSMAP_MODULE) + &davinci_evm_norflash_device, +#endif +#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ + defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) + &ide_dev, +#endif +}; + +static void __init +davinci_evm_map_io(void) +{ + davinci_map_common_io(); +} + +static __init void davinci_evm_init(void) +{ +#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ + defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) +#if defined(CONFIG_MTD_PHYSMAP) || \ + defined(CONFIG_MTD_PHYSMAP_MODULE) + printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, " + "but share pins.\n\t Disable IDE for NOR support.\n"); +#endif +#endif + + platform_add_devices(davinci_evm_devices, + ARRAY_SIZE(davinci_evm_devices)); + evm_init_i2c(); +} + +static __init void davinci_evm_irq_init(void) +{ + davinci_irq_init(); +} + +MACHINE_START(DAVINCI_EVM, "DaVinci EVM") + /* Maintainer: MontaVista Software */ + .phys_io = IO_PHYS, + .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, + .boot_params = (DAVINCI_DDR_BASE + 0x100), + .map_io = davinci_evm_map_io, + .init_irq = davinci_evm_irq_init, + .timer = &davinci_timer, + .init_machine = davinci_evm_init, +MACHINE_END diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c deleted file mode 100644 index c2701d740a1d..000000000000 --- a/arch/arm/mach-davinci/board-evm.c +++ /dev/null @@ -1,440 +0,0 @@ -/* - * TI DaVinci EVM board support - * - * Author: Kevin Hilman, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include - -#include -#include - -#include -#include -#include - -#include -#include -#include - -#define DAVINCI_CFC_ATA_BASE 0x01C66000 -#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 - -/* other misc. init functions */ -void __init davinci_psc_init(void); -void __init davinci_irq_init(void); -void __init davinci_map_common_io(void); -void __init davinci_init_common_hw(void); - -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) - -static struct mtd_partition davinci_evm_norflash_partitions[] = { - /* bootloader (U-Boot, etc) in first 4 sectors */ - { - .name = "bootloader", - .offset = 0, - .size = 4 * SZ_64K, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - /* bootloader params in the next 1 sectors */ - { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = SZ_64K, - .mask_flags = 0, - }, - /* kernel */ - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - .mask_flags = 0 - }, - /* file system */ - { - .name = "filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0 - } -}; - -static struct physmap_flash_data davinci_evm_norflash_data = { - .width = 2, - .parts = davinci_evm_norflash_partitions, - .nr_parts = ARRAY_SIZE(davinci_evm_norflash_partitions), -}; - -/* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF - * limits addresses to 16M, so using addresses past 16M will wrap */ -static struct resource davinci_evm_norflash_resource = { - .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, - .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device davinci_evm_norflash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &davinci_evm_norflash_data, - }, - .num_resources = 1, - .resource = &davinci_evm_norflash_resource, -}; - -#endif - -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) - -static struct resource ide_resources[] = { - { - .start = DAVINCI_CFC_ATA_BASE, - .end = DAVINCI_CFC_ATA_BASE + 0x7ff, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_IDE, - .end = IRQ_IDE, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 ide_dma_mask = DMA_BIT_MASK(32); - -static struct platform_device ide_dev = { - .name = "palm_bk3710", - .id = -1, - .resource = ide_resources, - .num_resources = ARRAY_SIZE(ide_resources), - .dev = { - .dma_mask = &ide_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -#endif - -/*----------------------------------------------------------------------*/ - -/* - * I2C GPIO expanders - */ - -#define PCF_Uxx_BASE(x) (DAVINCI_N_GPIO + ((x) * 8)) - - -/* U2 -- LEDs */ - -static struct gpio_led evm_leds[] = { - { .name = "DS8", .active_low = 1, - .default_trigger = "heartbeat", }, - { .name = "DS7", .active_low = 1, }, - { .name = "DS6", .active_low = 1, }, - { .name = "DS5", .active_low = 1, }, - { .name = "DS4", .active_low = 1, }, - { .name = "DS3", .active_low = 1, }, - { .name = "DS2", .active_low = 1, - .default_trigger = "mmc0", }, - { .name = "DS1", .active_low = 1, - .default_trigger = "ide-disk", }, -}; - -static const struct gpio_led_platform_data evm_led_data = { - .num_leds = ARRAY_SIZE(evm_leds), - .leds = evm_leds, -}; - -static struct platform_device *evm_led_dev; - -static int -evm_led_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - struct gpio_led *leds = evm_leds; - int status; - - while (ngpio--) { - leds->gpio = gpio++; - leds++; - } - - /* what an extremely annoying way to be forced to handle - * device unregistration ... - */ - evm_led_dev = platform_device_alloc("leds-gpio", 0); - platform_device_add_data(evm_led_dev, - &evm_led_data, sizeof evm_led_data); - - evm_led_dev->dev.parent = &client->dev; - status = platform_device_add(evm_led_dev); - if (status < 0) { - platform_device_put(evm_led_dev); - evm_led_dev = NULL; - } - return status; -} - -static int -evm_led_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - if (evm_led_dev) { - platform_device_unregister(evm_led_dev); - evm_led_dev = NULL; - } - return 0; -} - -static struct pcf857x_platform_data pcf_data_u2 = { - .gpio_base = PCF_Uxx_BASE(0), - .setup = evm_led_setup, - .teardown = evm_led_teardown, -}; - - -/* U18 - A/V clock generator and user switch */ - -static int sw_gpio; - -static ssize_t -sw_show(struct device *d, struct device_attribute *a, char *buf) -{ - char *s = gpio_get_value_cansleep(sw_gpio) ? "on\n" : "off\n"; - - strcpy(buf, s); - return strlen(s); -} - -static DEVICE_ATTR(user_sw, S_IRUGO, sw_show, NULL); - -static int -evm_u18_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - int status; - - /* export dip switch option */ - sw_gpio = gpio + 7; - status = gpio_request(sw_gpio, "user_sw"); - if (status == 0) - status = gpio_direction_input(sw_gpio); - if (status == 0) - status = device_create_file(&client->dev, &dev_attr_user_sw); - else - gpio_free(sw_gpio); - if (status != 0) - sw_gpio = -EINVAL; - - /* audio PLL: 48 kHz (vs 44.1 or 32), single rate (vs double) */ - gpio_request(gpio + 3, "pll_fs2"); - gpio_direction_output(gpio + 3, 0); - - gpio_request(gpio + 2, "pll_fs1"); - gpio_direction_output(gpio + 2, 0); - - gpio_request(gpio + 1, "pll_sr"); - gpio_direction_output(gpio + 1, 0); - - return 0; -} - -static int -evm_u18_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - gpio_free(gpio + 1); - gpio_free(gpio + 2); - gpio_free(gpio + 3); - - if (sw_gpio > 0) { - device_remove_file(&client->dev, &dev_attr_user_sw); - gpio_free(sw_gpio); - } - return 0; -} - -static struct pcf857x_platform_data pcf_data_u18 = { - .gpio_base = PCF_Uxx_BASE(1), - .n_latch = (1 << 3) | (1 << 2) | (1 << 1), - .setup = evm_u18_setup, - .teardown = evm_u18_teardown, -}; - - -/* U35 - various I/O signals used to manage USB, CF, ATA, etc */ - -static int -evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - /* p0 = nDRV_VBUS (initial: don't supply it) */ - gpio_request(gpio + 0, "nDRV_VBUS"); - gpio_direction_output(gpio + 0, 1); - - /* p1 = VDDIMX_EN */ - gpio_request(gpio + 1, "VDDIMX_EN"); - gpio_direction_output(gpio + 1, 1); - - /* p2 = VLYNQ_EN */ - gpio_request(gpio + 2, "VLYNQ_EN"); - gpio_direction_output(gpio + 2, 1); - - /* p3 = n3V3_CF_RESET (initial: stay in reset) */ - gpio_request(gpio + 3, "nCF_RESET"); - gpio_direction_output(gpio + 3, 0); - - /* (p4 unused) */ - - /* p5 = 1V8_WLAN_RESET (initial: stay in reset) */ - gpio_request(gpio + 5, "WLAN_RESET"); - gpio_direction_output(gpio + 5, 1); - - /* p6 = nATA_SEL (initial: select) */ - gpio_request(gpio + 6, "nATA_SEL"); - gpio_direction_output(gpio + 6, 0); - - /* p7 = nCF_SEL (initial: deselect) */ - gpio_request(gpio + 7, "nCF_SEL"); - gpio_direction_output(gpio + 7, 1); - - /* irlml6401 sustains over 3A, switches 5V in under 8 msec */ - setup_usb(500, 8); - - return 0; -} - -static int -evm_u35_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - gpio_free(gpio + 7); - gpio_free(gpio + 6); - gpio_free(gpio + 5); - gpio_free(gpio + 3); - gpio_free(gpio + 2); - gpio_free(gpio + 1); - gpio_free(gpio + 0); - return 0; -} - -static struct pcf857x_platform_data pcf_data_u35 = { - .gpio_base = PCF_Uxx_BASE(2), - .setup = evm_u35_setup, - .teardown = evm_u35_teardown, -}; - -/*----------------------------------------------------------------------*/ - -/* Most of this EEPROM is unused, but U-Boot uses some data: - * - 0x7f00, 6 bytes Ethernet Address - * - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL) - * - ... newer boards may have more - */ -static struct at24_platform_data eeprom_info = { - .byte_len = (256*1024) / 8, - .page_size = 64, - .flags = AT24_FLAG_ADDR16, -}; - -static struct i2c_board_info __initdata i2c_info[] = { - { - I2C_BOARD_INFO("pcf8574", 0x38), - .platform_data = &pcf_data_u2, - }, - { - I2C_BOARD_INFO("pcf8574", 0x39), - .platform_data = &pcf_data_u18, - }, - { - I2C_BOARD_INFO("pcf8574", 0x3a), - .platform_data = &pcf_data_u35, - }, - { - I2C_BOARD_INFO("24c256", 0x50), - .platform_data = &eeprom_info, - }, - /* ALSO: - * - tvl320aic33 audio codec (0x1b) - * - msp430 microcontroller (0x23) - * - tvp5146 video decoder (0x5d) - */ -}; - -/* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz), - * which requires 100 usec of idle bus after i2c writes sent to it. - */ -static struct davinci_i2c_platform_data i2c_pdata = { - .bus_freq = 20 /* kHz */, - .bus_delay = 100 /* usec */, -}; - -static void __init evm_init_i2c(void) -{ - davinci_init_i2c(&i2c_pdata); - i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); -} - -static struct platform_device *davinci_evm_devices[] __initdata = { -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) - &davinci_evm_norflash_device, -#endif -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) - &ide_dev, -#endif -}; - -static void __init -davinci_evm_map_io(void) -{ - davinci_map_common_io(); -} - -static __init void davinci_evm_init(void) -{ -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) - printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, " - "but share pins.\n\t Disable IDE for NOR support.\n"); -#endif -#endif - - platform_add_devices(davinci_evm_devices, - ARRAY_SIZE(davinci_evm_devices)); - evm_init_i2c(); -} - -static __init void davinci_evm_irq_init(void) -{ - davinci_irq_init(); -} - -MACHINE_START(DAVINCI_EVM, "DaVinci EVM") - /* Maintainer: MontaVista Software */ - .phys_io = IO_PHYS, - .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, - .boot_params = (DAVINCI_DDR_BASE + 0x100), - .map_io = davinci_evm_map_io, - .init_irq = davinci_evm_irq_init, - .timer = &davinci_timer, - .init_machine = davinci_evm_init, -MACHINE_END -- cgit v1.2.2 From d0e47fba054a55e0066c6ae2c807d98d086af5a9 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 14 Apr 2009 11:30:11 -0500 Subject: davinci: update DM644x support in preparation for more SoCs Rework DM644x code into SoC specific and board specific parts. This is also to generalize the structure a bit so it's easier to add support for new SoCs in the DaVinci family. Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/Kconfig | 9 +- arch/arm/mach-davinci/Makefile | 5 +- arch/arm/mach-davinci/board-dm644x-evm.c | 292 +++++++++++-- arch/arm/mach-davinci/dm644x.c | 461 +++++++++++++++++++++ .../mach-davinci/include/mach/board-dm6446evm.h | 20 + arch/arm/mach-davinci/include/mach/common.h | 6 + arch/arm/mach-davinci/include/mach/dm644x.h | 37 ++ 7 files changed, 791 insertions(+), 39 deletions(-) create mode 100644 arch/arm/mach-davinci/dm644x.c create mode 100644 arch/arm/mach-davinci/include/mach/board-dm6446evm.h create mode 100644 arch/arm/mach-davinci/include/mach/dm644x.h (limited to 'arch') diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index f18090e78e30..a9c78bc72b84 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -4,19 +4,18 @@ menu "TI DaVinci Implementations" comment "DaVinci Core Type" -config ARCH_DAVINCI644x - default y +config ARCH_DAVINCI_DM644x bool "DaVinci 644x based system" comment "DaVinci Board Type" config MACH_DAVINCI_EVM - bool "TI DaVinci EVM" + bool "TI DM644x EVM" default y - depends on ARCH_DAVINCI644x + depends on ARCH_DAVINCI_DM644x help Configure this option to specify the whether the board used - for development is a DaVinci EVM + for development is a DM644x EVM config DAVINCI_MUX diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index b27871af4fcf..1674661942f3 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -9,5 +9,8 @@ obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \ obj-$(CONFIG_DAVINCI_MUX) += mux.o +# Chip specific +obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o + # Board specific -obj-$(CONFIG_MACH_DAVINCI_EVM) += board-evm.o +obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index c2701d740a1d..5387e6b20405 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -15,15 +15,19 @@ #include #include #include +#include #include #include #include - +#include #include +#include #include #include #include +#include +#include #include #include @@ -32,28 +36,34 @@ #include #include -#include +#include #include #include +#include +#include +#include +#include + +#define DM644X_EVM_PHY_MASK (0x2) +#define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ #define DAVINCI_CFC_ATA_BASE 0x01C66000 -#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 -/* other misc. init functions */ -void __init davinci_psc_init(void); -void __init davinci_irq_init(void); -void __init davinci_map_common_io(void); -void __init davinci_init_common_hw(void); +#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE 0x04000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE 0x06000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE 0x08000000 -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) +#define LXT971_PHY_ID (0x001378e2) +#define LXT971_PHY_MASK (0xfffffff0) static struct mtd_partition davinci_evm_norflash_partitions[] = { - /* bootloader (U-Boot, etc) in first 4 sectors */ + /* bootloader (UBL, U-Boot, etc) in first 5 sectors */ { .name = "bootloader", .offset = 0, - .size = 4 * SZ_64K, + .size = 5 * SZ_64K, .mask_flags = MTD_WRITEABLE, /* force read-only */ }, /* bootloader params in the next 1 sectors */ @@ -103,10 +113,60 @@ static struct platform_device davinci_evm_norflash_device = { .resource = &davinci_evm_norflash_resource, }; -#endif +struct mtd_partition davinci_evm_nandflash_partition[] = { + /* 5 MB space at the beginning for bootloader and kernel */ + { + .name = "NAND filesystem", + .offset = 5 * SZ_1M, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + } +}; -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) +static struct davinci_nand_pdata davinci_evm_nandflash_data = { + .parts = davinci_evm_nandflash_partition, + .nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition), + .ecc_mode = NAND_ECC_HW, +}; + +static struct resource davinci_evm_nandflash_resource[] = { + { + .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, + .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, + .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device davinci_evm_nandflash_device = { + .name = "davinci_nand", + .id = 0, + .dev = { + .platform_data = &davinci_evm_nandflash_data, + }, + .num_resources = ARRAY_SIZE(davinci_evm_nandflash_resource), + .resource = davinci_evm_nandflash_resource, +}; + +static u64 davinci_fb_dma_mask = DMA_32BIT_MASK; + +static struct platform_device davinci_fb_device = { + .name = "davincifb", + .id = -1, + .dev = { + .dma_mask = &davinci_fb_dma_mask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = 0, +}; + +static struct platform_device rtc_dev = { + .name = "rtc_davinci_evm", + .id = -1, +}; static struct resource ide_resources[] = { { @@ -121,7 +181,7 @@ static struct resource ide_resources[] = { }, }; -static u64 ide_dma_mask = DMA_BIT_MASK(32); +static u64 ide_dma_mask = DMA_32BIT_MASK; static struct platform_device ide_dev = { .name = "palm_bk3710", @@ -130,12 +190,10 @@ static struct platform_device ide_dev = { .num_resources = ARRAY_SIZE(ide_resources), .dev = { .dma_mask = &ide_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), + .coherent_dma_mask = DMA_32BIT_MASK, }, }; -#endif - /*----------------------------------------------------------------------*/ /* @@ -314,7 +372,9 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) gpio_request(gpio + 7, "nCF_SEL"); gpio_direction_output(gpio + 7, 1); - /* irlml6401 sustains over 3A, switches 5V in under 8 msec */ + /* irlml6401 switches over 1A, in under 8 msec; + * now it can be managed by nDRV_VBUS ... + */ setup_usb(500, 8); return 0; @@ -346,13 +406,119 @@ static struct pcf857x_platform_data pcf_data_u35 = { * - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL) * - ... newer boards may have more */ +static struct memory_accessor *at24_mem_acc; + +static void at24_setup(struct memory_accessor *mem_acc, void *context) +{ + DECLARE_MAC_BUF(mac_str); + char mac_addr[6]; + + at24_mem_acc = mem_acc; + + /* Read MAC addr from EEPROM */ + if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, 6) == 6) { + printk(KERN_INFO "Read MAC addr from EEPROM: %s\n", + print_mac(mac_str, mac_addr)); + } +} + static struct at24_platform_data eeprom_info = { .byte_len = (256*1024) / 8, .page_size = 64, .flags = AT24_FLAG_ADDR16, + .setup = at24_setup, +}; + +int dm6446evm_eeprom_read(void *buf, off_t off, size_t count) +{ + if (at24_mem_acc) + return at24_mem_acc->read(at24_mem_acc, buf, off, count); + return -ENODEV; +} +EXPORT_SYMBOL(dm6446evm_eeprom_read); + +int dm6446evm_eeprom_write(void *buf, off_t off, size_t count) +{ + if (at24_mem_acc) + return at24_mem_acc->write(at24_mem_acc, buf, off, count); + return -ENODEV; +} +EXPORT_SYMBOL(dm6446evm_eeprom_write); + +/* + * MSP430 supports RTC, card detection, input from IR remote, and + * a bit more. It triggers interrupts on GPIO(7) from pressing + * buttons on the IR remote, and for card detect switches. + */ +static struct i2c_client *dm6446evm_msp; + +static int dm6446evm_msp_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + dm6446evm_msp = client; + return 0; +} + +static int dm6446evm_msp_remove(struct i2c_client *client) +{ + dm6446evm_msp = NULL; + return 0; +} + +static const struct i2c_device_id dm6446evm_msp_ids[] = { + { "dm6446evm_msp", 0, }, + { /* end of list */ }, +}; + +static struct i2c_driver dm6446evm_msp_driver = { + .driver.name = "dm6446evm_msp", + .id_table = dm6446evm_msp_ids, + .probe = dm6446evm_msp_probe, + .remove = dm6446evm_msp_remove, }; +static int dm6444evm_msp430_get_pins(void) +{ + static const char txbuf[2] = { 2, 4, }; + char buf[4]; + struct i2c_msg msg[2] = { + { + .addr = dm6446evm_msp->addr, + .flags = 0, + .len = 2, + .buf = (void __force *)txbuf, + }, + { + .addr = dm6446evm_msp->addr, + .flags = I2C_M_RD, + .len = 4, + .buf = buf, + }, + }; + int status; + + if (!dm6446evm_msp) + return -ENXIO; + + /* Command 4 == get input state, returns port 2 and port3 data + * S Addr W [A] len=2 [A] cmd=4 [A] + * RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P + */ + status = i2c_transfer(dm6446evm_msp->adapter, msg, 2); + if (status < 0) + return status; + + dev_dbg(&dm6446evm_msp->dev, + "PINS: %02x %02x %02x %02x\n", + buf[0], buf[1], buf[2], buf[3]); + + return (buf[3] << 8) | buf[2]; +} + static struct i2c_board_info __initdata i2c_info[] = { + { + I2C_BOARD_INFO("dm6446evm_msp", 0x23), + }, { I2C_BOARD_INFO("pcf8574", 0x38), .platform_data = &pcf_data_u2, @@ -371,7 +537,6 @@ static struct i2c_board_info __initdata i2c_info[] = { }, /* ALSO: * - tvl320aic33 audio codec (0x1b) - * - msp430 microcontroller (0x23) * - tvp5146 video decoder (0x5d) */ }; @@ -387,40 +552,101 @@ static struct davinci_i2c_platform_data i2c_pdata = { static void __init evm_init_i2c(void) { davinci_init_i2c(&i2c_pdata); + i2c_add_driver(&dm6446evm_msp_driver); i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); } static struct platform_device *davinci_evm_devices[] __initdata = { -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) - &davinci_evm_norflash_device, -#endif -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) - &ide_dev, -#endif + &davinci_fb_device, + &rtc_dev, +}; + +static struct davinci_uart_config uart_config __initdata = { + .enabled_uarts = (1 << 0), }; static void __init davinci_evm_map_io(void) { davinci_map_common_io(); + dm644x_init(); } -static __init void davinci_evm_init(void) +static int davinci_phy_fixup(struct phy_device *phydev) { + unsigned int control; + /* CRITICAL: Fix for increasing PHY signal drive strength for + * TX lockup issue. On DaVinci EVM, the Intel LXT971 PHY + * signal strength was low causing TX to fail randomly. The + * fix is to Set bit 11 (Increased MII drive strength) of PHY + * register 26 (Digital Config register) on this phy. */ + control = phy_read(phydev, 26); + phy_write(phydev, 26, (control | 0x800)); + return 0; +} + #if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) +#define HAS_ATA 1 +#else +#define HAS_ATA 0 +#endif + #if defined(CONFIG_MTD_PHYSMAP) || \ defined(CONFIG_MTD_PHYSMAP_MODULE) - printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, " - "but share pins.\n\t Disable IDE for NOR support.\n"); +#define HAS_NOR 1 +#else +#define HAS_NOR 0 #endif + +#if defined(CONFIG_MTD_NAND_DAVINCI) || \ + defined(CONFIG_MTD_NAND_DAVINCI_MODULE) +#define HAS_NAND 1 +#else +#define HAS_NAND 0 #endif +static __init void davinci_evm_init(void) +{ + struct clk *aemif_clk; + + aemif_clk = clk_get(NULL, "aemif"); + clk_enable(aemif_clk); + + if (HAS_ATA) { + if (HAS_NAND || HAS_NOR) + pr_warning("WARNING: both IDE and Flash are " + "enabled, but they share AEMIF pins.\n" + "\tDisable IDE for NAND/NOR support.\n"); + davinci_cfg_reg(DM644X_HPIEN_DISABLE); + davinci_cfg_reg(DM644X_ATAEN); + davinci_cfg_reg(DM644X_HDIREN); + platform_device_register(&ide_dev); + } else if (HAS_NAND || HAS_NOR) { + davinci_cfg_reg(DM644X_HPIEN_DISABLE); + davinci_cfg_reg(DM644X_ATAEN_DISABLE); + + /* only one device will be jumpered and detected */ + if (HAS_NAND) { + platform_device_register(&davinci_evm_nandflash_device); + evm_leds[7].default_trigger = "nand-disk"; + if (HAS_NOR) + pr_warning("WARNING: both NAND and NOR flash " + "are enabled; disable one of them.\n"); + } else if (HAS_NOR) + platform_device_register(&davinci_evm_norflash_device); + } + platform_add_devices(davinci_evm_devices, ARRAY_SIZE(davinci_evm_devices)); evm_init_i2c(); + + davinci_serial_init(&uart_config); + + /* Register the fixup for PHY on DaVinci */ + phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK, + davinci_phy_fixup); + } static __init void davinci_evm_irq_init(void) @@ -428,7 +654,7 @@ static __init void davinci_evm_irq_init(void) davinci_irq_init(); } -MACHINE_START(DAVINCI_EVM, "DaVinci EVM") +MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM") /* Maintainer: MontaVista Software */ .phys_io = IO_PHYS, .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c new file mode 100644 index 000000000000..d428ef192eac --- /dev/null +++ b/arch/arm/mach-davinci/dm644x.c @@ -0,0 +1,461 @@ +/* + * TI DaVinci DM644x chip specific setup + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "clock.h" +#include "mux.h" + +/* + * Device specific clocks + */ +#define DM644X_REF_FREQ 27000000 + +static struct pll_data pll1_data = { + .num = 1, + .phys_base = DAVINCI_PLL1_BASE, +}; + +static struct pll_data pll2_data = { + .num = 2, + .phys_base = DAVINCI_PLL2_BASE, +}; + +static struct clk ref_clk = { + .name = "ref_clk", + .rate = DM644X_REF_FREQ, +}; + +static struct clk pll1_clk = { + .name = "pll1", + .parent = &ref_clk, + .pll_data = &pll1_data, + .flags = CLK_PLL, +}; + +static struct clk pll1_sysclk1 = { + .name = "pll1_sysclk1", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll1_sysclk2 = { + .name = "pll1_sysclk2", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV2, +}; + +static struct clk pll1_sysclk3 = { + .name = "pll1_sysclk3", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV3, +}; + +static struct clk pll1_sysclk5 = { + .name = "pll1_sysclk5", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV5, +}; + +static struct clk pll1_aux_clk = { + .name = "pll1_aux_clk", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, +}; + +static struct clk pll1_sysclkbp = { + .name = "pll1_sysclkbp", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, + .div_reg = BPDIV +}; + +static struct clk pll2_clk = { + .name = "pll2", + .parent = &ref_clk, + .pll_data = &pll2_data, + .flags = CLK_PLL, +}; + +static struct clk pll2_sysclk1 = { + .name = "pll2_sysclk1", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll2_sysclk2 = { + .name = "pll2_sysclk2", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV2, +}; + +static struct clk pll2_sysclkbp = { + .name = "pll2_sysclkbp", + .parent = &pll2_clk, + .flags = CLK_PLL | PRE_PLL, + .div_reg = BPDIV +}; + +static struct clk dsp_clk = { + .name = "dsp", + .parent = &pll1_sysclk1, + .lpsc = DAVINCI_LPSC_GEM, + .flags = PSC_DSP, + .usecount = 1, /* REVISIT how to disable? */ +}; + +static struct clk arm_clk = { + .name = "arm", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_ARM, + .flags = ALWAYS_ENABLED, +}; + +static struct clk vicp_clk = { + .name = "vicp", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_IMCOP, + .flags = PSC_DSP, + .usecount = 1, /* REVISIT how to disable? */ +}; + +static struct clk vpss_master_clk = { + .name = "vpss_master", + .parent = &pll1_sysclk3, + .lpsc = DAVINCI_LPSC_VPSSMSTR, + .flags = CLK_PSC, +}; + +static struct clk vpss_slave_clk = { + .name = "vpss_slave", + .parent = &pll1_sysclk3, + .lpsc = DAVINCI_LPSC_VPSSSLV, +}; + +static struct clk uart0_clk = { + .name = "uart0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART0, +}; + +static struct clk uart1_clk = { + .name = "uart1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART1, +}; + +static struct clk uart2_clk = { + .name = "uart2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART2, +}; + +static struct clk emac_clk = { + .name = "emac", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_EMAC_WRAPPER, +}; + +static struct clk i2c_clk = { + .name = "i2c", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_I2C, +}; + +static struct clk ide_clk = { + .name = "ide", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_ATA, +}; + +static struct clk asp_clk = { + .name = "asp0", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_McBSP, +}; + +static struct clk mmcsd_clk = { + .name = "mmcsd", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_MMC_SD, +}; + +static struct clk spi_clk = { + .name = "spi", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_SPI, +}; + +static struct clk gpio_clk = { + .name = "gpio", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_GPIO, +}; + +static struct clk usb_clk = { + .name = "usb", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_USB, +}; + +static struct clk vlynq_clk = { + .name = "vlynq", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_VLYNQ, +}; + +static struct clk aemif_clk = { + .name = "aemif", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_AEMIF, +}; + +static struct clk pwm0_clk = { + .name = "pwm0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM0, +}; + +static struct clk pwm1_clk = { + .name = "pwm1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM1, +}; + +static struct clk pwm2_clk = { + .name = "pwm2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM2, +}; + +static struct clk timer0_clk = { + .name = "timer0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER0, +}; + +static struct clk timer1_clk = { + .name = "timer1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER1, +}; + +static struct clk timer2_clk = { + .name = "timer2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER2, + .usecount = 1, /* REVISIT: why cant' this be disabled? */ +}; + +struct davinci_clk dm644x_clks[] = { + CLK(NULL, "ref", &ref_clk), + CLK(NULL, "pll1", &pll1_clk), + CLK(NULL, "pll1_sysclk1", &pll1_sysclk1), + CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), + CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), + CLK(NULL, "pll1_sysclk5", &pll1_sysclk5), + CLK(NULL, "pll1_aux", &pll1_aux_clk), + CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp), + CLK(NULL, "pll2", &pll2_clk), + CLK(NULL, "pll2_sysclk1", &pll2_sysclk1), + CLK(NULL, "pll2_sysclk2", &pll2_sysclk2), + CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp), + CLK(NULL, "dsp", &dsp_clk), + CLK(NULL, "arm", &arm_clk), + CLK(NULL, "vicp", &vicp_clk), + CLK(NULL, "vpss_master", &vpss_master_clk), + CLK(NULL, "vpss_slave", &vpss_slave_clk), + CLK(NULL, "arm", &arm_clk), + CLK(NULL, "uart0", &uart0_clk), + CLK(NULL, "uart1", &uart1_clk), + CLK(NULL, "uart2", &uart2_clk), + CLK("davinci_emac.1", NULL, &emac_clk), + CLK("i2c_davinci.1", NULL, &i2c_clk), + CLK("palm_bk3710", NULL, &ide_clk), + CLK("soc-audio.0", NULL, &asp_clk), + CLK("davinci_mmc.0", NULL, &mmcsd_clk), + CLK(NULL, "spi", &spi_clk), + CLK(NULL, "gpio", &gpio_clk), + CLK(NULL, "usb", &usb_clk), + CLK(NULL, "vlynq", &vlynq_clk), + CLK(NULL, "aemif", &aemif_clk), + CLK(NULL, "pwm0", &pwm0_clk), + CLK(NULL, "pwm1", &pwm1_clk), + CLK(NULL, "pwm2", &pwm2_clk), + CLK(NULL, "timer0", &timer0_clk), + CLK(NULL, "timer1", &timer1_clk), + CLK("watchdog", NULL, &timer2_clk), + CLK(NULL, NULL, NULL), +}; + +#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE) + +static struct resource dm644x_emac_resources[] = { + { + .start = DM644X_EMAC_BASE, + .end = DM644X_EMAC_BASE + 0x47ff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_EMACINT, + .end = IRQ_EMACINT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dm644x_emac_device = { + .name = "davinci_emac", + .id = 1, + .num_resources = ARRAY_SIZE(dm644x_emac_resources), + .resource = dm644x_emac_resources, +}; + +#endif + +/* + * Device specific mux setup + * + * soc description mux mode mode mux dbg + * reg offset mask mode + */ +static const struct mux_config dm644x_pins[] = { +MUX_CFG(DM644X, HDIREN, 0, 16, 1, 1, true) +MUX_CFG(DM644X, ATAEN, 0, 17, 1, 1, true) +MUX_CFG(DM644X, ATAEN_DISABLE, 0, 17, 1, 0, true) + +MUX_CFG(DM644X, HPIEN_DISABLE, 0, 29, 1, 0, true) + +MUX_CFG(DM644X, AEAW, 0, 0, 31, 31, true) + +MUX_CFG(DM644X, MSTK, 1, 9, 1, 0, false) + +MUX_CFG(DM644X, I2C, 1, 7, 1, 1, false) + +MUX_CFG(DM644X, MCBSP, 1, 10, 1, 1, false) + +MUX_CFG(DM644X, UART1, 1, 1, 1, 1, true) +MUX_CFG(DM644X, UART2, 1, 2, 1, 1, true) + +MUX_CFG(DM644X, PWM0, 1, 4, 1, 1, false) + +MUX_CFG(DM644X, PWM1, 1, 5, 1, 1, false) + +MUX_CFG(DM644X, PWM2, 1, 6, 1, 1, false) + +MUX_CFG(DM644X, VLYNQEN, 0, 15, 1, 1, false) +MUX_CFG(DM644X, VLSCREN, 0, 14, 1, 1, false) +MUX_CFG(DM644X, VLYNQWD, 0, 12, 3, 3, false) + +MUX_CFG(DM644X, EMACEN, 0, 31, 1, 1, true) + +MUX_CFG(DM644X, GPIO3V, 0, 31, 1, 0, true) + +MUX_CFG(DM644X, GPIO0, 0, 24, 1, 0, true) +MUX_CFG(DM644X, GPIO3, 0, 25, 1, 0, false) +MUX_CFG(DM644X, GPIO43_44, 1, 7, 1, 0, false) +MUX_CFG(DM644X, GPIO46_47, 0, 22, 1, 0, true) + +MUX_CFG(DM644X, RGB666, 0, 22, 1, 1, true) + +MUX_CFG(DM644X, LOEEN, 0, 24, 1, 1, true) +MUX_CFG(DM644X, LFLDEN, 0, 25, 1, 1, false) +}; + + +/*----------------------------------------------------------------------*/ + +static const s8 dma_chan_dm644x_no_event[] = { + 0, 1, 12, 13, 14, + 15, 25, 30, 31, 45, + 46, 47, 55, 56, 57, + 58, 59, 60, 61, 62, + 63, + -1 +}; + +static struct edma_soc_info dm644x_edma_info = { + .n_channel = 64, + .n_region = 4, + .n_slot = 128, + .n_tc = 2, + .noevent = dma_chan_dm644x_no_event, +}; + +static struct resource edma_resources[] = { + { + .name = "edma_cc", + .start = 0x01c00000, + .end = 0x01c00000 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc0", + .start = 0x01c10000, + .end = 0x01c10000 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc1", + .start = 0x01c10400, + .end = 0x01c10400 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CCINT0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CCERRINT, + .flags = IORESOURCE_IRQ, + }, + /* not using TC*_ERR */ +}; + +static struct platform_device dm644x_edma_device = { + .name = "edma", + .id = -1, + .dev.platform_data = &dm644x_edma_info, + .num_resources = ARRAY_SIZE(edma_resources), + .resource = edma_resources, +}; + +/*----------------------------------------------------------------------*/ +void __init dm644x_init(void) +{ + davinci_clk_init(dm644x_clks); + davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins)); +} + +static int __init dm644x_init_devices(void) +{ + if (!cpu_is_davinci_dm644x()) + return 0; + + platform_device_register(&dm644x_edma_device); + return 0; +} +postcore_initcall(dm644x_init_devices); diff --git a/arch/arm/mach-davinci/include/mach/board-dm6446evm.h b/arch/arm/mach-davinci/include/mach/board-dm6446evm.h new file mode 100644 index 000000000000..3216f21c1238 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/board-dm6446evm.h @@ -0,0 +1,20 @@ +/* + * DaVinci DM6446 EVM board specific headers + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or ifndef. + */ + +#ifndef _MACH_DAVINCI_DM6446EVM_H +#define _MACH_DAVINCI_DM6446EVM_H + +#include + +int dm6446evm_eeprom_read(char *buf, off_t off, size_t count); +int dm6446evm_eeprom_write(char *buf, off_t off, size_t count); + +#endif diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index 4b522e5c70ec..191770976250 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -16,6 +16,12 @@ struct sys_timer; extern struct sys_timer davinci_timer; +extern void davinci_irq_init(void); +extern void davinci_map_common_io(void); + +/* parameters describe VBUS sourcing for host mode */ +extern void setup_usb(unsigned mA, unsigned potpgt_msec); + /* parameters describe VBUS sourcing for host mode */ extern void setup_usb(unsigned mA, unsigned potpgt_msec); diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h new file mode 100644 index 000000000000..3dcb9f4e58b4 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/dm644x.h @@ -0,0 +1,37 @@ +/* + * This file contains the processor specific definitions + * of the TI DM644x. + * + * Copyright (C) 2008 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef __ASM_ARCH_DM644X_H +#define __ASM_ARCH_DM644X_H + +#include +#include + +#define DM644X_EMAC_BASE (0x01C80000) +#define DM644X_EMAC_CNTRL_OFFSET (0x0000) +#define DM644X_EMAC_CNTRL_MOD_OFFSET (0x1000) +#define DM644X_EMAC_CNTRL_RAM_OFFSET (0x2000) +#define DM644X_EMAC_MDIO_OFFSET (0x4000) +#define DM644X_EMAC_CNTRL_RAM_SIZE (0x2000) + +void __init dm644x_init(void); + +#endif /* __ASM_ARCH_DM644X_H */ -- cgit v1.2.2 From 3e9c18e1dc71b9a0fac302e2defe99d850ad3d79 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 15 Apr 2009 14:19:21 -0500 Subject: davinci: DM644x: NAND: update partitioning Update NAND partitioning for the dm6446 evm, unmasking the hidden data at the beginning and letting the kernel be updated from Linux. - This is boot-compatible with TI's software (U-Boot 1.20 and both the 2.6.10 and 2.6.18 kernels), in terms of startup and loading kernels from flash. - In the same way, it's also boot-compatible with mainline U-Boot, which stores U-Boot params in block 0 not block 16. - It's not quite compatible with systems that previously used NAND partitions to hold (filesystem) data. The compatibilities are a bit different based on which kernel was used previously + Users of TI/MV kernels no longer see mtd2 "params" (mainline u-boot env is in a different place) * Filesystem is now mtd2 ... vs mtd3 + Users of GIT kernels now see mtd0 and mtd1 partitions * Filesystem partition starts 640 KBytes earlier * Filesystem is now mtd2 ... vs mtd0 * Linux now *uses* the flash-resident BBT * Removes annoying slowdown/hiccup during boot * Potentially ~64KB less space available with TI/MV kernels If you *used* NAND partitions from Linux, there is no solution that's fully compatible with all previous kernels in those respects ... ergo this "best compromise". It'd be good to back back up the filesystem data; or, carry your own backwards-compatibility patch for awhile. Signed-off-by: David Brownell Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-dm644x-evm.c | 42 +++++++++++++++++++++++++++----- 1 file changed, 36 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 5387e6b20405..c039674fe99e 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -16,11 +16,12 @@ #include #include #include +#include #include #include #include -#include + #include #include #include @@ -113,20 +114,49 @@ static struct platform_device davinci_evm_norflash_device = { .resource = &davinci_evm_norflash_resource, }; +/* DM644x EVM includes a 64 MByte small-page NAND flash (16K blocks). + * It may used instead of the (default) NOR chip to boot, using TI's + * tools to install the secondary boot loader (UBL) and U-Boot. + */ struct mtd_partition davinci_evm_nandflash_partition[] = { - /* 5 MB space at the beginning for bootloader and kernel */ + /* Bootloader layout depends on whose u-boot is installed, but we + * can hide all the details. + * - block 0 for u-boot environment ... in mainline u-boot + * - block 1 for UBL (plus up to four backup copies in blocks 2..5) + * - blocks 6...? for u-boot + * - blocks 16..23 for u-boot environment ... in TI's u-boot + */ + { + .name = "bootloader", + .offset = 0, + .size = SZ_256K + SZ_128K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* Kernel */ { - .name = "NAND filesystem", - .offset = 5 * SZ_1M, + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + .mask_flags = 0, + }, + /* File system (older GIT kernels started this on the 5MB mark) */ + { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL, .mask_flags = 0, } + /* A few blocks at end hold a flash BBT ... created by TI's CCS + * using flashwriter_nand.out, but ignored by TI's versions of + * Linux and u-boot. We boot faster by using them. + */ }; static struct davinci_nand_pdata davinci_evm_nandflash_data = { .parts = davinci_evm_nandflash_partition, .nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition), .ecc_mode = NAND_ECC_HW, + .options = NAND_USE_FLASH_BBT, }; static struct resource davinci_evm_nandflash_resource[] = { @@ -151,14 +181,14 @@ static struct platform_device davinci_evm_nandflash_device = { .resource = davinci_evm_nandflash_resource, }; -static u64 davinci_fb_dma_mask = DMA_32BIT_MASK; +static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32); static struct platform_device davinci_fb_device = { .name = "davincifb", .id = -1, .dev = { .dma_mask = &davinci_fb_dma_mask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .num_resources = 0, }; -- cgit v1.2.2 From 28853da20c840f0d147674ac850c539d3306109f Mon Sep 17 00:00:00 2001 From: Martyn Welch Date: Mon, 27 Apr 2009 17:24:28 +0100 Subject: powerpc/86xx: Add device_type entry to soc for ppc9a The 'device_type = "soc";' line *is* needed in the DTS for get_immrbase() to return the correct address. Signed-off-by: Martyn Welch Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/gef_ppc9a.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts index d47ad0718759..53a7a6255909 100644 --- a/arch/powerpc/boot/dts/gef_ppc9a.dts +++ b/arch/powerpc/boot/dts/gef_ppc9a.dts @@ -161,6 +161,7 @@ #address-cells = <1>; #size-cells = <1>; #interrupt-cells = <2>; + device_type = "soc"; compatible = "fsl,mpc8641-soc", "simple-bus"; ranges = <0x0 0xfef00000 0x00100000>; reg = <0xfef00000 0x100000>; // CCSRBAR 1M -- cgit v1.2.2 From b2ad5e1e709e404dd637097411f1853d37926a6a Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Tue, 28 Apr 2009 00:37:53 +0100 Subject: FRV: Remove unused header asm/init.h. It seems nothing has included the frv asm/init.h header for some time, and its actual contents are out of date with include/linux/init.h. So just delete it. Signed-off-by: Tim Abbott Signed-off-by: David Howells Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/frv/include/asm/init.h | 12 ------------ 1 file changed, 12 deletions(-) delete mode 100644 arch/frv/include/asm/init.h (limited to 'arch') diff --git a/arch/frv/include/asm/init.h b/arch/frv/include/asm/init.h deleted file mode 100644 index 8b15838de216..000000000000 --- a/arch/frv/include/asm/init.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_INIT_H -#define _ASM_INIT_H - -#define __init __attribute__ ((__section__ (".text.init"))) -#define __initdata __attribute__ ((__section__ (".data.init"))) -/* For assembly routines */ -#define __INIT .section ".text.init",#alloc,#execinstr -#define __FINIT .previous -#define __INITDATA .section ".data.init",#alloc,#write - -#endif - -- cgit v1.2.2 From df1f6d200c1e20788184251c49f349b38d90889c Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Tue, 28 Apr 2009 00:37:58 +0100 Subject: FRV: Use __INIT macro instead of .text.init. FRV is placing some code in the .text.init section but does not reference that section in its linker scripts. This change moves this code from the .text.init section to the .init.text section, which is presumably where it belongs. Signed-off-by: Tim Abbott Signed-off-by: David Howells Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/frv/kernel/head-mmu-fr451.S | 3 ++- arch/frv/kernel/head-uc-fr401.S | 3 ++- arch/frv/kernel/head-uc-fr451.S | 3 ++- arch/frv/kernel/head-uc-fr555.S | 3 ++- 4 files changed, 8 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/frv/kernel/head-mmu-fr451.S b/arch/frv/kernel/head-mmu-fr451.S index c8f210d84ff5..98f87d586e59 100644 --- a/arch/frv/kernel/head-mmu-fr451.S +++ b/arch/frv/kernel/head-mmu-fr451.S @@ -9,6 +9,7 @@ * 2 of the License, or (at your option) any later version. */ +#include #include #include #include @@ -31,7 +32,7 @@ #define __400_LCR 0xfe000100 #define __400_LSBR 0xfe000c00 - .section .text.init,"ax" + __INIT .balign 4 ############################################################################### diff --git a/arch/frv/kernel/head-uc-fr401.S b/arch/frv/kernel/head-uc-fr401.S index ee282be20fff..438643cfa38e 100644 --- a/arch/frv/kernel/head-uc-fr401.S +++ b/arch/frv/kernel/head-uc-fr401.S @@ -9,6 +9,7 @@ * 2 of the License, or (at your option) any later version. */ +#include #include #include #include @@ -30,7 +31,7 @@ #define __400_LCR 0xfe000100 #define __400_LSBR 0xfe000c00 - .section .text.init,"ax" + __INIT .balign 4 ############################################################################### diff --git a/arch/frv/kernel/head-uc-fr451.S b/arch/frv/kernel/head-uc-fr451.S index b10d9c8295d2..b2a76c4a1786 100644 --- a/arch/frv/kernel/head-uc-fr451.S +++ b/arch/frv/kernel/head-uc-fr451.S @@ -9,6 +9,7 @@ * 2 of the License, or (at your option) any later version. */ +#include #include #include #include @@ -30,7 +31,7 @@ #define __400_LCR 0xfe000100 #define __400_LSBR 0xfe000c00 - .section .text.init,"ax" + __INIT .balign 4 ############################################################################### diff --git a/arch/frv/kernel/head-uc-fr555.S b/arch/frv/kernel/head-uc-fr555.S index 39937c19b460..5497aaf34f77 100644 --- a/arch/frv/kernel/head-uc-fr555.S +++ b/arch/frv/kernel/head-uc-fr555.S @@ -9,6 +9,7 @@ * 2 of the License, or (at your option) any later version. */ +#include #include #include #include @@ -29,7 +30,7 @@ #define __551_LCR 0xfeff1100 #define __551_LSBR 0xfeff1c00 - .section .text.init,"ax" + __INIT .balign 4 ############################################################################### -- cgit v1.2.2 From 991da17ec0b9f396154c8120ffd10e5d7d7aa361 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Mon, 27 Apr 2009 14:02:22 -0400 Subject: arm: Use __INIT macro instead of .text.init. arm is placing some code in the .text.init section, but it does not reference that section in its linker scripts. This change moves this code from the .text.init section to the .init.text section, which is presumably where it belongs. Signed-off-by: Tim Abbott Acked-by: Russell King Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/arm/mm/proc-v6.S | 3 ++- arch/arm/mm/proc-v7.S | 3 ++- arch/arm/mm/tlb-v6.S | 3 ++- arch/arm/mm/tlb-v7.S | 3 ++- 4 files changed, 8 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index f0cc599facb7..087e239704df 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -10,6 +10,7 @@ * * This is the "shell" of the ARMv6 processor support. */ +#include #include #include #include @@ -132,7 +133,7 @@ cpu_v6_name: .asciz "ARMv6-compatible processor" .align - .section ".text.init", #alloc, #execinstr + __INIT /* * __v6_setup diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index d1ebec42521d..c221e26ac1d3 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -9,6 +9,7 @@ * * This is the "shell" of the ARMv7 processor support. */ +#include #include #include #include @@ -153,7 +154,7 @@ cpu_v7_name: .ascii "ARMv7 Processor" .align - .section ".text.init", #alloc, #execinstr + __INIT /* * __v7_setup diff --git a/arch/arm/mm/tlb-v6.S b/arch/arm/mm/tlb-v6.S index 20f84bbaa9bb..73d7d89b04c4 100644 --- a/arch/arm/mm/tlb-v6.S +++ b/arch/arm/mm/tlb-v6.S @@ -10,6 +10,7 @@ * ARM architecture version 6 TLB handling functions. * These assume a split I/D TLB. */ +#include #include #include #include @@ -87,7 +88,7 @@ ENTRY(v6wbi_flush_kern_tlb_range) mcr p15, 0, r2, c7, c5, 4 @ prefetch flush mov pc, lr - .section ".text.init", #alloc, #execinstr + __INIT .type v6wbi_tlb_fns, #object ENTRY(v6wbi_tlb_fns) diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S index 24ba5109f2e7..b637e7380ab7 100644 --- a/arch/arm/mm/tlb-v7.S +++ b/arch/arm/mm/tlb-v7.S @@ -11,6 +11,7 @@ * ARM architecture version 6 TLB handling functions. * These assume a split I/D TLB. */ +#include #include #include #include @@ -80,7 +81,7 @@ ENTRY(v7wbi_flush_kern_tlb_range) mov pc, lr ENDPROC(v7wbi_flush_kern_tlb_range) - .section ".text.init", #alloc, #execinstr + __INIT .type v7wbi_tlb_fns, #object ENTRY(v7wbi_tlb_fns) -- cgit v1.2.2 From edada399e81303e85a1090b3cf0f3c5b13ff5f53 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Mon, 27 Apr 2009 14:02:23 -0400 Subject: powerpc: Use TEXT_TEXT macro in linker script. Rather than adding .ref.text to the powerpc linker script so that we can use __REF on the powerpc architecture, it seems simpler to switch to using the generic TEXT_TEXT macro. Signed-off-by: Tim Abbott Cc: Benjamin Herrenschmidt Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/vmlinux.lds.S | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index d7425fffbc1c..433ae118406d 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -54,7 +54,8 @@ SECTIONS ALIGN_FUNCTION(); HEAD_TEXT _text = .; - *(.text .fixup .text.init.refok .exit.text.refok __ftr_alt_*) + TEXT_TEXT + *(.fixup __ftr_alt_*) SCHED_TEXT LOCK_TEXT KPROBES_TEXT -- cgit v1.2.2 From 9203fc9c1266ed21c327f679ad05e53509dfbee1 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Mon, 27 Apr 2009 14:02:24 -0400 Subject: powerpc: Use __REF macro instead of old .text.init.refok. The section .text.init.refok is deprecated and __REF (.ref.text) should be used in assembly files instead. This patch cleans up a few uses of .text.init.refok in the powerpc architecture. Signed-off-by: Tim Abbott Cc: Benjamin Herrenschmidt Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/powerpc/include/asm/ppc_asm.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h index f59a66684aed..384d90c9c272 100644 --- a/arch/powerpc/include/asm/ppc_asm.h +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -4,6 +4,7 @@ #ifndef _ASM_POWERPC_PPC_ASM_H #define _ASM_POWERPC_PPC_ASM_H +#include #include #include #include @@ -189,7 +190,7 @@ name: \ GLUE(.,name): #define _INIT_GLOBAL(name) \ - .section ".text.init.refok"; \ + __REF; \ .align 2 ; \ .globl name; \ .globl GLUE(.,name); \ @@ -229,7 +230,7 @@ name: \ GLUE(.,name): #define _INIT_STATIC(name) \ - .section ".text.init.refok"; \ + __REF; \ .align 2 ; \ .section ".opd","aw"; \ name: \ -- cgit v1.2.2 From 882016ff3659126f6da50cf7cb84a0a15d00a87b Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Mon, 27 Apr 2009 14:02:25 -0400 Subject: sh: Use __INIT macro instead of .text.init. The sh architecture has some code in the .text.init section, but it does not reference that section in its linker scripts. This change moves this code from the .text.init section to the .init.text section, which is presumably where it belongs. Signed-off-by: Tim Abbott Acked-by: Sam Ravnborg Acked-by: Paul Mundt Signed-off-by: Linus Torvalds --- arch/sh/kernel/cpu/sh5/entry.S | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S index e640c63d5811..7e49cb812f8b 100644 --- a/arch/sh/kernel/cpu/sh5/entry.S +++ b/arch/sh/kernel/cpu/sh5/entry.S @@ -10,6 +10,7 @@ * for more details. */ #include +#include #include #include #include @@ -2058,10 +2059,10 @@ asm_uaccess_end: /* - * --- .text.init Section + * --- .init.text Section */ - .section .text.init, "ax" + __INIT /* * void trap_init (void) -- cgit v1.2.2 From a0871e8cb8c3f5ee2ecc560ae73a35cd420440f9 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Mon, 27 Apr 2009 14:02:26 -0400 Subject: sparc: cleanup references to deprecated .text.init* sections. The section .text.init.refok is deprecated and __REF (.ref.text) should be used in assembly files instead. This patch cleans up a few uses of .text.init.refok in the sparc architecture. Also fix a reference to .text.init in a comment that wasn't updated to .init.text. Signed-off-by: Tim Abbott Cc: David S. Miller Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/sparc/kernel/head_32.S | 2 +- arch/sparc/kernel/head_64.S | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/head_32.S b/arch/sparc/kernel/head_32.S index e91f01a57598..6b4d8acc4c83 100644 --- a/arch/sparc/kernel/head_32.S +++ b/arch/sparc/kernel/head_32.S @@ -735,7 +735,7 @@ go_to_highmem: nop /* The code above should be at beginning and we have to take care about - * short jumps, as branching to .text.init section from .text is usually + * short jumps, as branching to .init.text section from .text is usually * impossible */ __INIT /* Acquire boot time privileged register values, this will help debugging. diff --git a/arch/sparc/kernel/head_64.S b/arch/sparc/kernel/head_64.S index 3a1b7bf03cff..91bf4c7f79b9 100644 --- a/arch/sparc/kernel/head_64.S +++ b/arch/sparc/kernel/head_64.S @@ -467,7 +467,7 @@ jump_to_sun4u_init: jmpl %g2 + %g0, %g0 nop - .section .text.init.refok + __REF sun4u_init: BRANCH_IF_SUN4V(g1, sun4v_init) -- cgit v1.2.2 From 2e8aead1b57ede7979bd4e24797c77e181775d9c Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 17 Apr 2009 08:03:01 +0000 Subject: powerpc: ppc32 needs elf_read_implies_exec() On ppc64 we implemented elf_read_implies_exec() for 32-bit binaries because old toolchains had bugs where they didn't mark program segments executable that needed to be. For some reason we didn't do this on ppc32 builds. This hadn't been an issue until commit 8d30c14c ("powerpc/mm: Rework I$/D$ coherency (v3)"), which had as a side effect that we are now enforcing execute permissions to some extent on 32-bit 4xx and Book E processors. This fixes it by defining elf_read_implies_exec on 32-bit to turn on the read-implies-exec behaviour on programs that are sufficiently old that they don't have a PT_GNU_STACK program header. Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/include/asm/elf.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h index 087c22f1d368..d6b4a12cdeff 100644 --- a/arch/powerpc/include/asm/elf.h +++ b/arch/powerpc/include/asm/elf.h @@ -260,6 +260,7 @@ do { \ #else # define SET_PERSONALITY(ex) \ set_personality(PER_LINUX | (current->personality & (~PER_MASK))) +# define elf_read_implies_exec(ex, exec_stk) (exec_stk != EXSTACK_DISABLE_X) #endif /* __powerpc64__ */ extern int dcache_bsize; -- cgit v1.2.2 From ff61e5ccc35b7159a50741fc4b992817785acd5c Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 22 Apr 2009 22:43:03 +0000 Subject: powerpc/cell: Select PCI for IBM_CELL_BLADE AND CELLEB Currently PPC_CELL_NATIVE selects PPC_OF_PLATFORM_PCI, but does not select PCI. This can lead to a config with the former and the latter disabled, which does not build. To fix this PPC_CELL_NATIVE should select PCI. However, that would force PCI on for QPACE, which also selects PPC_CELL_NATIVE. So instead move the select of PPC_OF_PLATFORM_PCI and PCI under both IBM_CELL_BLADE and CELLEB. Signed-off-by: Michael Ellerman Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/Kconfig | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig index 40e24c39ad06..50f17bdd3c16 100644 --- a/arch/powerpc/platforms/cell/Kconfig +++ b/arch/powerpc/platforms/cell/Kconfig @@ -13,7 +13,6 @@ config PPC_CELL_COMMON config PPC_CELL_NATIVE bool select PPC_CELL_COMMON - select PPC_OF_PLATFORM_PCI select MPIC select IBM_NEW_EMAC_EMAC4 select IBM_NEW_EMAC_RGMII @@ -25,6 +24,8 @@ config PPC_IBM_CELL_BLADE bool "IBM Cell Blade" depends on PPC64 && PPC_BOOK3S select PPC_CELL_NATIVE + select PPC_OF_PLATFORM_PCI + select PCI select MMIO_NVRAM select PPC_UDBG_16550 select UDBG_RTAS_CONSOLE @@ -33,6 +34,8 @@ config PPC_CELLEB bool "Toshiba's Cell Reference Set 'Celleb' Architecture" depends on PPC64 && PPC_BOOK3S select PPC_CELL_NATIVE + select PPC_OF_PLATFORM_PCI + select PCI select HAS_TXX9_SERIAL select PPC_UDBG_BEAT select USB_OHCI_BIG_ENDIAN_MMIO -- cgit v1.2.2 From d8f48457d5af6601abdecaad7a95c45bfeef90d5 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 16 Apr 2009 09:05:37 +0000 Subject: powerpc/ps3: Fix build error on UP A non-SMP version of smp_send_stop() is now included in smp.h. Remove the unneeded definition in the PS3 smp.c. Fixes build errors like these when CONFIG_SMP=n: arch/powerpc/platforms/ps3/setup.c:49: error: redefinition of 'smp_send_stop' include/linux/smp.h:125: error: previous definition of 'smp_send_stop' was here Reported-by: Subrata Modak Signed-off-by: Geoff Levand Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/ps3/setup.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c index 66181821322a..1a7b5ae0c83e 100644 --- a/arch/powerpc/platforms/ps3/setup.c +++ b/arch/powerpc/platforms/ps3/setup.c @@ -45,10 +45,6 @@ DEFINE_MUTEX(ps3_gpu_mutex); EXPORT_SYMBOL_GPL(ps3_gpu_mutex); -#if !defined(CONFIG_SMP) -static void smp_send_stop(void) {} -#endif - static union ps3_firmware_version ps3_firmware_version; void ps3_get_firmware_version(union ps3_firmware_version *v) -- cgit v1.2.2 From 6d3d4be40357e3ea43b5c8837dec01d8f6cd1c67 Mon Sep 17 00:00:00 2001 From: Jesper Nilsson Date: Tue, 28 Apr 2009 16:42:39 +0200 Subject: CRIS: Wire up syscalls signalfd4 to writev. Adds sys_signalfd4, sys_eventfd2, sys_epoll_create1, sys_dup3, sys_pipe2, sys_inotify_init1, sys_preadv, sys_pwritev for both CRISv10 and CRISv32. --- arch/cris/arch-v10/kernel/entry.S | 14 +++++++++++--- arch/cris/arch-v32/kernel/entry.S | 8 ++++++++ arch/cris/include/asm/unistd.h | 12 ++++++++++-- 3 files changed, 29 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S index 72f5cd319b97..2c18d08cd913 100644 --- a/arch/cris/arch-v10/kernel/entry.S +++ b/arch/cris/arch-v10/kernel/entry.S @@ -536,10 +536,10 @@ multiple_interrupt: movem $r13, [$sp] push $r10 ; push orig_r10 clear.d [$sp=$sp-4] ; frametype == 0, normal frame - + move.d $sp, $r10 jsr do_multiple_IRQ - + jump ret_from_intr do_sigtrap: @@ -585,7 +585,7 @@ _ugdb_handle_breakpoint: pop $r0 ; Restore r0. ba do_sigtrap ; SIGTRAP the offending process. pop $dccr ; Restore dccr in delay slot. - + .global kernel_execve kernel_execve: move.d __NR_execve, $r9 @@ -929,6 +929,14 @@ sys_call_table: .long sys_fallocate .long sys_timerfd_settime /* 325 */ .long sys_timerfd_gettime + .long sys_signalfd4 + .long sys_eventfd2 + .long sys_epoll_create1 + .long sys_dup3 /* 330 */ + .long sys_pipe2 + .long sys_inotify_init1 + .long sys_preadv + .long sys_pwritev /* * NOTE!! This doesn't have to be exact - we just have diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S index 5e674c8f7c51..435b9671bd4b 100644 --- a/arch/cris/arch-v32/kernel/entry.S +++ b/arch/cris/arch-v32/kernel/entry.S @@ -852,6 +852,14 @@ sys_call_table: .long sys_fallocate .long sys_timerfd_settime /* 325 */ .long sys_timerfd_gettime + .long sys_signalfd4 + .long sys_eventfd2 + .long sys_epoll_create1 + .long sys_dup3 /* 330 */ + .long sys_pipe2 + .long sys_inotify_init1 + .long sys_preadv + .long sys_pwritev /* * NOTE!! This doesn't have to be exact - we just have diff --git a/arch/cris/include/asm/unistd.h b/arch/cris/include/asm/unistd.h index 235d076379d5..c17079388bb9 100644 --- a/arch/cris/include/asm/unistd.h +++ b/arch/cris/include/asm/unistd.h @@ -281,7 +281,7 @@ #define __NR_mbind 274 #define __NR_get_mempolicy 275 #define __NR_set_mempolicy 276 -#define __NR_mq_open 277 +#define __NR_mq_open 277 #define __NR_mq_unlink (__NR_mq_open+1) #define __NR_mq_timedsend (__NR_mq_open+2) #define __NR_mq_timedreceive (__NR_mq_open+3) @@ -331,10 +331,18 @@ #define __NR_fallocate 324 #define __NR_timerfd_settime 325 #define __NR_timerfd_gettime 326 +#define __NR_signalfd4 327 +#define __NR_eventfd2 328 +#define __NR_epoll_create1 329 +#define __NR_dup3 330 +#define __NR_pipe2 331 +#define __NR_inotify_init1 332 +#define __NR_preadv 333 +#define __NR_pwritev 334 #ifdef __KERNEL__ -#define NR_syscalls 327 +#define NR_syscalls 335 #include -- cgit v1.2.2 From 999fb23ef868719b8bd55ee3f6b1f7a8fd8016af Mon Sep 17 00:00:00 2001 From: Jesper Nilsson Date: Tue, 28 Apr 2009 19:08:10 +0200 Subject: CRISv32: Fix typo compile error in ARTPEC-3 gpio driver. arch/cris/arch-v32/drivers/mach-a3/gpio.c: +spin_lock_irqrestore(&gpio_lock, flags); arch/cris/arch-v32/drivers/mach-a3/gpio.c: +spin_lock_irqrestore(&gpio_lock, flags); should that not be "spin_unlock_irqrestore()"? The code in question was inside an (most often) undefined ifdef. Reported-by: "Robert P. J. Day" Signed-off-by: Jesper Nilsson --- arch/cris/arch-v32/drivers/mach-a3/gpio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/cris/arch-v32/drivers/mach-a3/gpio.c b/arch/cris/arch-v32/drivers/mach-a3/gpio.c index 7a87bc0ae2e8..97357cfd17bb 100644 --- a/arch/cris/arch-v32/drivers/mach-a3/gpio.c +++ b/arch/cris/arch-v32/drivers/mach-a3/gpio.c @@ -681,7 +681,7 @@ static int virtual_gpio_ioctl(struct file *file, unsigned int cmd, shadow |= ~readl(dir_oe[priv->minor]) | (arg & changeable_bits[priv->minor]); i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - spin_lock_irqrestore(&gpio_lock, flags); + spin_unlock_irqrestore(&gpio_lock, flags); break; case IO_CLRBITS: spin_lock_irqsave(&gpio_lock, flags); @@ -690,7 +690,7 @@ static int virtual_gpio_ioctl(struct file *file, unsigned int cmd, shadow |= ~readl(dir_oe[priv->minor]) & ~(arg & changeable_bits[priv->minor]); i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - spin_lock_irqrestore(&gpio_lock, flags); + spin_unlock_irqrestore(&gpio_lock, flags); break; case IO_HIGHALARM: /* Set alarm when bits with 1 in arg go high. */ -- cgit v1.2.2 From 13beadd91f148933f47947a88ab2c97a1ca9768d Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Tue, 28 Apr 2009 11:47:15 -0400 Subject: powerpc: Revert switch to TEXT_TEXT in linker script Commit edada399 broke the build on 64-bit powerpc because it moved the __ftr_alt_* sections of a file away from the .text section, causing link failures due to relative conditional branch targets being too far away from the branch instructions. This happens on pretty much all 64-bit powerpc configs. This change reverts commit edada399 while preserving the update from the *.refok sections to .ref.text that has happened since. Signed-off-by: Tim Abbott Requested-by: Paul Mackerras Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/vmlinux.lds.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 433ae118406d..a047a6cfca4d 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -54,8 +54,8 @@ SECTIONS ALIGN_FUNCTION(); HEAD_TEXT _text = .; - TEXT_TEXT - *(.fixup __ftr_alt_*) + /* careful! __ftr_alt_* sections need to be close to .text */ + *(.text .fixup __ftr_alt_* .ref.text) SCHED_TEXT LOCK_TEXT KPROBES_TEXT -- cgit v1.2.2 From 16752e2ead535c0e616c64d3fee8401ebd0c9f62 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 28 Apr 2009 21:20:11 +0200 Subject: m68k: arch/m68k/kernel/sun3-head.S needs Fix this: arch/m68k/kernel/sun3-head.S: Assembler messages: arch/m68k/kernel/sun3-head.S:32: Error: Unknown operator -- statement `__head' ignored Introduced by commit 6f335cab0431d5df4995bcd4fd952d4c746d5a86 ("m68k: convert to use __HEAD and HEAD_TEXT macros."), which started using __HEAD without adding the appropriate include. Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds --- arch/m68k/kernel/sun3-head.S | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/m68k/kernel/sun3-head.S b/arch/m68k/kernel/sun3-head.S index 9e5c3e57c598..43036bf4aeed 100644 --- a/arch/m68k/kernel/sun3-head.S +++ b/arch/m68k/kernel/sun3-head.S @@ -1,4 +1,5 @@ #include +#include #include #include -- cgit v1.2.2 From 33015c85995716d03f6293346cf05a1908b0fb9a Mon Sep 17 00:00:00 2001 From: Stuart Bennett Date: Tue, 28 Apr 2009 20:17:48 +0100 Subject: tracing: x86, mmiotrace: fix range test Matching on (addr == (p->addr + p->len)) causes problems when mappings are adjacent. [ Impact: fix mmiotrace confusion on adjacent iomaps ] Signed-off-by: Stuart Bennett Acked-by: Pekka Paalanen Cc: Steven Rostedt LKML-Reference: <1240946271-7083-2-git-send-email-stuart@freedesktop.org> Signed-off-by: Ingo Molnar --- arch/x86/mm/kmmio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c index 4f115e00486b..50dc802a1c46 100644 --- a/arch/x86/mm/kmmio.c +++ b/arch/x86/mm/kmmio.c @@ -87,7 +87,7 @@ static struct kmmio_probe *get_kmmio_probe(unsigned long addr) { struct kmmio_probe *p; list_for_each_entry_rcu(p, &kmmio_probes, list) { - if (addr >= p->addr && addr <= (p->addr + p->len)) + if (addr >= p->addr && addr < (p->addr + p->len)) return p; } return NULL; -- cgit v1.2.2 From 2f65dd475c6a8a997145ea83cc3d2d5e6dc55af1 Mon Sep 17 00:00:00 2001 From: John Wright Date: Wed, 29 Apr 2009 14:32:01 -0600 Subject: x86: gettimeofday() vDSO: fix segfault when tv == NULL According to the gettimeofday(2) manual: If either tv or tz is NULL, the corresponding structure is not set or returned. Since it is legal to give NULL as the tv argument, the code should make sure tv is not NULL before trying to dereference it. This issue manifests itself on x86_64 when vdso=0 is not on the kernel command-line and libc uses the vDSO for gettimeofday() (e.g. glibc >= 2.7). A simple reproducer: #include #include int main(void) { struct timezone tz; gettimeofday(NULL, &tz); return 0; } See http://bugs.debian.org/466491 for more details. [ Impact: fix gettimeofday(NULL, &tz) segfault ] Signed-off-by: John Wright Cc: Andi Kleen Cc: John Wright LKML-Reference: <1241037121-14805-1-git-send-email-john.wright@hp.com> Signed-off-by: Ingo Molnar --- arch/x86/vdso/vclock_gettime.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/vdso/vclock_gettime.c b/arch/x86/vdso/vclock_gettime.c index d9d35824c56f..6a40b78b46aa 100644 --- a/arch/x86/vdso/vclock_gettime.c +++ b/arch/x86/vdso/vclock_gettime.c @@ -104,11 +104,13 @@ notrace int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz) { long ret; if (likely(gtod->sysctl_enabled && gtod->clock.vread)) { - BUILD_BUG_ON(offsetof(struct timeval, tv_usec) != - offsetof(struct timespec, tv_nsec) || - sizeof(*tv) != sizeof(struct timespec)); - do_realtime((struct timespec *)tv); - tv->tv_usec /= 1000; + if (likely(tv != NULL)) { + BUILD_BUG_ON(offsetof(struct timeval, tv_usec) != + offsetof(struct timespec, tv_nsec) || + sizeof(*tv) != sizeof(struct timespec)); + do_realtime((struct timespec *)tv); + tv->tv_usec /= 1000; + } if (unlikely(tz != NULL)) { /* Avoid memcpy. Some old compilers fail to inline it */ tz->tz_minuteswest = gtod->sys_tz.tz_minuteswest; -- cgit v1.2.2 From 9cba3ccc8fe77b67aff2db8f5827d7cb752ce11f Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 30 Apr 2009 17:06:03 +0100 Subject: [ARM] 5488/1: ARM errata: Invalidation of the Instruction Cache operation can fail This patch implements the recommended workaround for erratum 411920 (ARM1136, ARM1156, ARM1176). Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/Kconfig | 9 +++++++++ arch/arm/mm/cache-v6.S | 33 +++++++++++++++++++++++++++++++++ arch/arm/mm/flush.c | 23 +++++++++++++++++++++-- 3 files changed, 63 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 99875dd06f50..e28a76bd1793 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -740,6 +740,15 @@ if !MMU source "arch/arm/Kconfig-nommu" endif +config ARM_ERRATA_411920 + bool "ARM errata: Invalidation of the Instruction Cache operation can fail" + depends on CPU_V6 && !SMP + help + Invalidation of the Instruction Cache operation can + fail. This erratum is present in 1136 (before r1p4), 1156 and 1176. + It does not affect the MPCore. This option enables the ARM Ltd. + recommended workaround. + endmenu source "arch/arm/common/Kconfig" diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index 2c6c2a7c05a0..8f5c13f4c936 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -20,6 +20,31 @@ #define D_CACHE_LINE_SIZE 32 #define BTB_FLUSH_SIZE 8 +#ifdef CONFIG_ARM_ERRATA_411920 +/* + * Invalidate the entire I cache (this code is a workaround for the ARM1136 + * erratum 411920 - Invalidate Instruction Cache operation can fail. This + * erratum is present in 1136, 1156 and 1176. It does not affect the MPCore. + * + * Registers: + * r0 - set to 0 + * r1 - corrupted + */ +ENTRY(v6_icache_inval_all) + mov r0, #0 + mrs r1, cpsr + cpsid ifa @ disable interrupts + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + msr cpsr_cx, r1 @ restore interrupts + .rept 11 @ ARM Ltd recommends at least + nop @ 11 NOPs + .endr + mov pc, lr +#endif + /* * v6_flush_cache_all() * @@ -31,7 +56,11 @@ ENTRY(v6_flush_kern_cache_all) mov r0, #0 #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c14, 0 @ D cache clean+invalidate +#ifndef CONFIG_ARM_ERRATA_411920 mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate +#else + b v6_icache_inval_all +#endif #else mcr p15, 0, r0, c7, c15, 0 @ Cache clean+invalidate #endif @@ -103,7 +132,11 @@ ENTRY(v6_coherent_user_range) mov r0, #0 #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c10, 4 @ drain write buffer +#ifndef CONFIG_ARM_ERRATA_411920 mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate +#else + b v6_icache_inval_all +#endif #else mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB #endif diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 4e283481cee1..c07222eb5ce0 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -18,6 +18,10 @@ #include "mm.h" +#ifdef CONFIG_ARM_ERRATA_411920 +extern void v6_icache_inval_all(void); +#endif + #ifdef CONFIG_CPU_CACHE_VIPT #define ALIAS_FLUSH_START 0xffff4000 @@ -32,10 +36,15 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr) asm( "mcrr p15, 0, %1, %0, c14\n" " mcr p15, 0, %2, c7, c10, 4\n" +#ifndef CONFIG_ARM_ERRATA_411920 " mcr p15, 0, %2, c7, c5, 0\n" +#endif : : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero) : "cc"); +#ifdef CONFIG_ARM_ERRATA_411920 + v6_icache_inval_all(); +#endif } void flush_cache_mm(struct mm_struct *mm) @@ -48,11 +57,16 @@ void flush_cache_mm(struct mm_struct *mm) if (cache_is_vipt_aliasing()) { asm( "mcr p15, 0, %0, c7, c14, 0\n" + " mcr p15, 0, %0, c7, c10, 4\n" +#ifndef CONFIG_ARM_ERRATA_411920 " mcr p15, 0, %0, c7, c5, 0\n" - " mcr p15, 0, %0, c7, c10, 4" +#endif : : "r" (0) : "cc"); +#ifdef CONFIG_ARM_ERRATA_411920 + v6_icache_inval_all(); +#endif } } @@ -67,11 +81,16 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned if (cache_is_vipt_aliasing()) { asm( "mcr p15, 0, %0, c7, c14, 0\n" + " mcr p15, 0, %0, c7, c10, 4\n" +#ifndef CONFIG_ARM_ERRATA_411920 " mcr p15, 0, %0, c7, c5, 0\n" - " mcr p15, 0, %0, c7, c10, 4" +#endif : : "r" (0) : "cc"); +#ifdef CONFIG_ARM_ERRATA_411920 + v6_icache_inval_all(); +#endif } } -- cgit v1.2.2 From 7ce236fcd6fd45b0441a2d49acb2ceb2de2e8a47 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 30 Apr 2009 17:06:09 +0100 Subject: [ARM] 5487/1: ARM errata: Stale prediction on replaced interworking branch This patch adds the workaround for the 430973 Cortex-A8 (r1p0..r1p2) erratum. The BTAC/BTB is now flushed at every context switch. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/Kconfig | 16 ++++++++++++++++ arch/arm/mm/proc-v7.S | 8 ++++++++ 2 files changed, 24 insertions(+) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e28a76bd1793..84e4816362b3 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -749,6 +749,22 @@ config ARM_ERRATA_411920 It does not affect the MPCore. This option enables the ARM Ltd. recommended workaround. +config ARM_ERRATA_430973 + bool "ARM errata: Stale prediction on replaced interworking branch" + depends on CPU_V7 + help + This option enables the workaround for the 430973 Cortex-A8 + (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb + interworking branch is replaced with another code sequence at the + same virtual address, whether due to self-modifying code or virtual + to physical address re-mapping, Cortex-A8 does not recover from the + stale interworking branch prediction. This results in Cortex-A8 + executing the new code sequence in the incorrect ARM or Thumb state. + The workaround enables the BTB/BTAC operations by setting ACTLR.IBE + and also flushes the branch target cache at every context switch. + Note that setting specific bits in the ACTLR register may not be + available in non-secure mode. + endmenu source "arch/arm/common/Kconfig" diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index d1ebec42521d..fc81159596fe 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -95,6 +95,9 @@ ENTRY(cpu_v7_switch_mm) mov r2, #0 ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id orr r0, r0, #TTB_FLAGS +#ifdef CONFIG_ARM_ERRATA_430973 + mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB +#endif mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID isb 1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 @@ -180,6 +183,11 @@ __v7_setup: stmia r12, {r0-r5, r7, r9, r11, lr} bl v7_flush_dcache_all ldmia r12, {r0-r5, r7, r9, r11, lr} +#ifdef CONFIG_ARM_ERRATA_430973 + mrc p15, 0, r10, c1, c0, 1 @ read aux control register + orr r10, r10, #(1 << 6) @ set IBE to 1 + mcr p15, 0, r10, c1, c0, 1 @ write aux control register +#endif mov r10, #0 #ifdef HARVARD_CACHE mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate -- cgit v1.2.2 From 855c551f5b8cc3815d58e1056c1f1e7c461e2d24 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 30 Apr 2009 17:06:15 +0100 Subject: [ARM] 5490/1: ARM errata: Processor deadlock when a false hazard is created This patch adds a workaround for the 458693 Cortex-A8 (r2p0) erratum. It sets the corresponding bits in the auxiliary control register so that the PLD instruction becomes a NOP. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/Kconfig | 13 +++++++++++++ arch/arm/mm/proc-v7.S | 6 ++++++ 2 files changed, 19 insertions(+) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 84e4816362b3..49f85664083d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -765,6 +765,19 @@ config ARM_ERRATA_430973 Note that setting specific bits in the ACTLR register may not be available in non-secure mode. +config ARM_ERRATA_458693 + bool "ARM errata: Processor deadlock when a false hazard is created" + depends on CPU_V7 + help + This option enables the workaround for the 458693 Cortex-A8 (r2p0) + erratum. For very specific sequences of memory operations, it is + possible for a hazard condition intended for a cache line to instead + be incorrectly associated with a different cache line. This false + hazard might then cause a processor deadlock. The workaround enables + the L1 caching of the NEON accesses and disables the PLD instruction + in the ACTLR register. Note that setting specific bits in the ACTLR + register may not be available in non-secure mode. + endmenu source "arch/arm/common/Kconfig" diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index fc81159596fe..370baa7a0f08 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -187,6 +187,12 @@ __v7_setup: mrc p15, 0, r10, c1, c0, 1 @ read aux control register orr r10, r10, #(1 << 6) @ set IBE to 1 mcr p15, 0, r10, c1, c0, 1 @ write aux control register +#endif +#ifdef CONFIG_ARM_ERRATA_458693 + mrc p15, 0, r10, c1, c0, 1 @ read aux control register + orr r10, r10, #(1 << 5) @ set L1NEON to 1 + orr r10, r10, #(1 << 9) @ set PLDNOP to 1 + mcr p15, 0, r10, c1, c0, 1 @ write aux control register #endif mov r10, #0 #ifdef HARVARD_CACHE -- cgit v1.2.2 From 0516e4643cd22fc9f535aef02ad1de66c382c93b Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 30 Apr 2009 17:06:20 +0100 Subject: [ARM] 5489/1: ARM errata: Data written to the L2 cache can be overwritten with stale data This patch is a workaround for the 460075 Cortex-A8 (r2p0) erratum. It configures the L2 cache auxiliary control register so that the Write Allocate mode for the L2 cache is disabled. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/Kconfig | 12 ++++++++++++ arch/arm/mm/proc-v7.S | 5 +++++ 2 files changed, 17 insertions(+) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 49f85664083d..9faccc411c2a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -778,6 +778,18 @@ config ARM_ERRATA_458693 in the ACTLR register. Note that setting specific bits in the ACTLR register may not be available in non-secure mode. +config ARM_ERRATA_460075 + bool "ARM errata: Data written to the L2 cache can be overwritten with stale data" + depends on CPU_V7 + help + This option enables the workaround for the 460075 Cortex-A8 (r2p0) + erratum. Any asynchronous access to the L2 cache may encounter a + situation in which recent store transactions to the L2 cache are lost + and overwritten with stale memory contents from external memory. The + workaround disables the write-allocate mode for the L2 cache via the + ACTLR register. Note that setting specific bits in the ACTLR register + may not be available in non-secure mode. + endmenu source "arch/arm/common/Kconfig" diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 370baa7a0f08..f2305441e7d1 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -193,6 +193,11 @@ __v7_setup: orr r10, r10, #(1 << 5) @ set L1NEON to 1 orr r10, r10, #(1 << 9) @ set PLDNOP to 1 mcr p15, 0, r10, c1, c0, 1 @ write aux control register +#endif +#ifdef CONFIG_ARM_ERRATA_460075 + mrc p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register + orr r10, r10, #(1 << 22) @ set the Write Allocate disable bit + mcr p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register #endif mov r10, #0 #ifdef HARVARD_CACHE -- cgit v1.2.2 From 79af6c49a93ea80952fd42dc180c8827cd8c984c Mon Sep 17 00:00:00 2001 From: Michael Wolf Date: Mon, 27 Apr 2009 06:17:54 +0000 Subject: powerpc adjust oprofile_cpu_type version 3 Oprofile is changing the naming it is using for the compatibility modes. Instead of having compat-power, oprofile will go to family naming convention and use ibm-compat-v. Currently only ibm-compat-v1 will be defined. The notion of compatibility events just started with POWER6. So there is no way that any other tool could exist that is using these oprofile_cpu_type strings we want to change. Signed-off-by: Mike Wolf Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/cputable.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index cd1b687544f3..5e925dbffbfb 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -382,7 +382,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .machine_check = machine_check_generic, - .oprofile_cpu_type = "ppc64/compat-power5+", + .oprofile_cpu_type = "ppc64/ibm-compat-v1", + .oprofile_type = PPC_OPROFILE_POWER4, .platform = "power5+", }, { /* Power6 */ @@ -416,7 +417,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .machine_check = machine_check_generic, - .oprofile_cpu_type = "ppc64/compat-power6", + .oprofile_cpu_type = "ppc64/ibm-compat-v1", + .oprofile_type = PPC_OPROFILE_POWER4, .platform = "power6", }, { /* 2.06-compliant processor, i.e. Power7 "architected" mode */ @@ -429,7 +431,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .machine_check = machine_check_generic, - .oprofile_cpu_type = "ppc64/compat-power7", + .oprofile_type = PPC_OPROFILE_POWER4, + .oprofile_cpu_type = "ppc64/ibm-compat-v1", .platform = "power7", }, { /* Power7 */ @@ -1833,8 +1836,10 @@ static void __init setup_cpu_spec(unsigned long offset, struct cpu_spec *s) * and, in that case, keep the current value for * oprofile_cpu_type. */ - if (old.oprofile_cpu_type == NULL) + if (old.oprofile_cpu_type == NULL) { t->oprofile_cpu_type = s->oprofile_cpu_type; + t->oprofile_type = s->oprofile_type; + } } *PTRRELOC(&cur_cpu_spec) = &the_cpu_spec; -- cgit v1.2.2 From 0203d6ec4e88062f20558fbed3cdff2af758a53b Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 29 Apr 2009 19:39:38 +0000 Subject: powerpc: Fix setting of oprofile cpu type commit 2657dd4e301d4841ed67a4fac7d145ad8f3e1b28 introduced a bug where we would now always override the "real" oprofile CPU type with the "compatible" one provided by a pseudo-PVR in the device-tree which is incorrect and breaks oprofile on all current configs since the "compatible" ones aren't yet recognized. This fixes it. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/cputable.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 5e925dbffbfb..f9c40f869c6e 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -1837,8 +1837,8 @@ static void __init setup_cpu_spec(unsigned long offset, struct cpu_spec *s) * oprofile_cpu_type. */ if (old.oprofile_cpu_type == NULL) { - t->oprofile_cpu_type = s->oprofile_cpu_type; - t->oprofile_type = s->oprofile_type; + t->oprofile_cpu_type = old.oprofile_cpu_type; + t->oprofile_type = old.oprofile_type; } } -- cgit v1.2.2 From c520f72172814c202ee47c51a63a1b1dde7f22f2 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Mon, 20 Apr 2009 20:02:16 +0200 Subject: avr32: drop unused CLEAN_FILES Left over from before we used arch/avr32/include Signed-off-by: Sam Ravnborg Cc: Jesper Nilsson --- arch/avr32/Makefile | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile index 0b97e14f73f6..c21a3290d542 100644 --- a/arch/avr32/Makefile +++ b/arch/avr32/Makefile @@ -43,8 +43,6 @@ core-y += arch/avr32/mm/ drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/ libs-y += arch/avr32/lib/ -CLEAN_FILES += include/asm-avr32/.arch include/asm-avr32/arch - BOOT_TARGETS := vmlinux.elf vmlinux.bin uImage uImage.srec .PHONY: $(BOOT_TARGETS) install -- cgit v1.2.2 From 5ef316fbe7fd03802b8625833884587927161c14 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 3 Feb 2009 23:48:54 +0000 Subject: [ARM] S3C64XX: Add S3C64XX_PA_IIS{0,1} to Add the physical address of the two I2S channel register blocks. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6400/include/mach/map.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h index baf1c0f1ea5a..8199972ed5bd 100644 --- a/arch/arm/mach-s3c6400/include/mach/map.h +++ b/arch/arm/mach-s3c6400/include/mach/map.h @@ -40,6 +40,8 @@ #define S3C64XX_PA_FB (0x77100000) #define S3C64XX_PA_SYSCON (0x7E00F000) +#define S3C64XX_PA_IIS0 (0x7F002000) +#define S3C64XX_PA_IIS1 (0x7F003000) #define S3C64XX_PA_TIMER (0x7F006000) #define S3C64XX_PA_IIC0 (0x7F004000) #define S3C64XX_PA_IIC1 (0x7F00F000) -- cgit v1.2.2 From dc8fc7edef5fe799a1c38c916d2c64b1d0fcf81a Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 28 Apr 2009 10:06:00 +0100 Subject: [ARM] S3C2412: Add missing cache flush in suspend code The alterations to the suspend code missed adding a call to the cache flushing routines during the suspend path of the S3C2412. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2412/pm.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c index c9cfe40e21f6..a7417c479ffe 100644 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c2412/pm.c @@ -21,6 +21,7 @@ #include #include +#include #include #include @@ -39,6 +40,8 @@ static void s3c2412_cpu_suspend(void) { unsigned long tmp; + flush_cache_all(); + /* set our standby method to sleep */ tmp = __raw_readl(S3C2412_PWRCFG); -- cgit v1.2.2 From 595e8fabea22c96f674102f33b4a759f4512dd9c Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Sun, 26 Apr 2009 14:18:25 +0200 Subject: microblaze: Storage class should be before const qualifier The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser Signed-off-by: Michal Simek --- arch/microblaze/kernel/cpu/cpuinfo-static.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/cpu/cpuinfo-static.c b/arch/microblaze/kernel/cpu/cpuinfo-static.c index cfe44effdb77..450ca6bb828d 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo-static.c +++ b/arch/microblaze/kernel/cpu/cpuinfo-static.c @@ -14,8 +14,8 @@ #include #include -const static char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY; -const static char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER; +static const char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY; +static const char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER; #define err_printk(x) \ early_printk("ERROR: Microblaze " x "- different for kernel and DTS\n"); -- cgit v1.2.2 From c71a7a3875b40d18a08c09f6c757bd7a9b6ce894 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 30 Apr 2009 09:35:53 +0200 Subject: microblaze: Fix return value for sys_ipc Signed-off-by: John Linn Signed-off-by: Michal Simek --- arch/microblaze/kernel/sys_microblaze.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c index ba0568c2cc1c..31905ff590b7 100644 --- a/arch/microblaze/kernel/sys_microblaze.c +++ b/arch/microblaze/kernel/sys_microblaze.c @@ -131,7 +131,7 @@ sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth) ret = sys_shmctl(first, second, (struct shmid_ds *) ptr); break; } - return -EINVAL; + return ret; } asmlinkage int sys_vfork(struct pt_regs *regs) -- cgit v1.2.2 From f9a196b8dceba3c1e5fe885b81e45043ad7c60fc Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 1 May 2009 20:59:25 +0200 Subject: x86: initialize io_bitmap_base on 32bit commit db949bba3c7cf2e664ac12e237c6d4c914f0c69d (x86-32: use non-lazy io bitmap context switching) broke ioperm for 32bit because it removed the lazy initialization of io_bitmap_base and did not set it to the real bitmap offset. [ Impact: fix non-working sys_ioperm() on 32-bit kernels ] Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/common.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index c4f667896c28..c1caefc82e62 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1203,6 +1203,8 @@ void __cpuinit cpu_init(void) load_TR_desc(); load_LDT(&init_mm.context); + t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap); + #ifdef CONFIG_DOUBLEFAULT /* Set up doublefault TSS pointer in the GDT */ __set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss); -- cgit v1.2.2 From 9c88b06dc7589fb0bccd617c4659066fb803cfda Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Sat, 2 May 2009 20:29:00 +0900 Subject: m32r: build fix for __stringify macro This patch fixes the following build error of 2.6.30-rc3-git2: AS arch/m32r/kernel/head.o In file included from /include/linux/init.h:7, from /arch/m32r/kernel/head.S:11: /include/linux/stringify.h:9: error: syntax error in macro parameter list /include/linux/stringify.h:10: error: syntax error in macro parameter list This build error was caused at __HEAD macro in arch/m32r/kernel/head.S, which uses __stringify() macro. Remove -traditional option from EXTRA_AFLAGS for the m32r, because the __stringify() macro depends on the gcc's variadic macro extension function, due to commit: Make __stringify support variable argument macros too commit: 8f7c2c37319a81ef4c2bfdec67b1ccd5744d97e4 Signed-off-by: Hirokazu Takata --- arch/m32r/boot/compressed/Makefile | 1 - arch/m32r/kernel/Makefile | 2 -- 2 files changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/m32r/boot/compressed/Makefile b/arch/m32r/boot/compressed/Makefile index d908e1d3c07f..560484ae35ec 100644 --- a/arch/m32r/boot/compressed/Makefile +++ b/arch/m32r/boot/compressed/Makefile @@ -6,7 +6,6 @@ targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o \ piggy.o vmlinux.lds -EXTRA_AFLAGS := -traditional OBJECTS = $(obj)/head.o $(obj)/misc.o diff --git a/arch/m32r/kernel/Makefile b/arch/m32r/kernel/Makefile index 09200d4886e3..b1a4b6036591 100644 --- a/arch/m32r/kernel/Makefile +++ b/arch/m32r/kernel/Makefile @@ -9,5 +9,3 @@ obj-y := process.o entry.o traps.o align.o irq.o setup.o time.o \ obj-$(CONFIG_SMP) += smp.o smpboot.o obj-$(CONFIG_MODULES) += module.o - -EXTRA_AFLAGS := -traditional -- cgit v1.2.2 From 9cd67243de582c206758adff152c5fcc1b2aa069 Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Sat, 2 May 2009 22:08:33 +0900 Subject: m32r: use __stringify() macro in assembler.h Replace #x with __stringify(x). Also, #ifndef __STR is removed and undefine __STR macro at the beginning. The __STR() macro is still remained, because the assembler.h might be included from assembly codes as well as C codes. Signed-off-by: Hirokazu Takata --- arch/m32r/include/asm/assembler.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/m32r/include/asm/assembler.h b/arch/m32r/include/asm/assembler.h index 26351539b5ff..728799fc70aa 100644 --- a/arch/m32r/include/asm/assembler.h +++ b/arch/m32r/include/asm/assembler.h @@ -9,14 +9,15 @@ * This file contains M32R architecture specific macro definitions. */ +#include + +#undef __STR -#ifndef __STR #ifdef __ASSEMBLY__ #define __STR(x) x #else -#define __STR(x) #x +#define __STR(x) __stringify(x) #endif -#endif /* __STR */ #ifdef CONFIG_SMP #define M32R_LOCK __STR(lock) -- cgit v1.2.2 From 1ffb1c0c64b4a2b75eed1f63cc47f2beb711c92f Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Thu, 30 Apr 2009 15:08:45 -0700 Subject: alpha: titan and marvel build fixes These platforms got broken after u64 => 'long long' conversion. Apparently that change was compile-tested with 'make allmodconfig', but it doesn't include systems that depend on !ALPHA_LEGACY_START_ADDRESS. Signed-off-by: Ivan Kokshaysky Cc: Al Viro Cc: Richard Henderson Signed-off-by: Linus Torvalds --- arch/alpha/kernel/err_ev6.c | 2 +- arch/alpha/kernel/err_ev7.c | 4 ++-- arch/alpha/kernel/err_impl.h | 10 +++++----- arch/alpha/kernel/err_marvel.c | 2 +- arch/alpha/kernel/err_titan.c | 4 ++-- arch/alpha/kernel/proto.h | 5 ++--- 6 files changed, 13 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/err_ev6.c b/arch/alpha/kernel/err_ev6.c index 985e5c1681ac..8ca6345bf131 100644 --- a/arch/alpha/kernel/err_ev6.c +++ b/arch/alpha/kernel/err_ev6.c @@ -229,7 +229,7 @@ ev6_process_logout_frame(struct el_common *mchk_header, int print) } void -ev6_machine_check(u64 vector, u64 la_ptr) +ev6_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_common *mchk_header = (struct el_common *)la_ptr; diff --git a/arch/alpha/kernel/err_ev7.c b/arch/alpha/kernel/err_ev7.c index 73770c6ca013..d738a67112d4 100644 --- a/arch/alpha/kernel/err_ev7.c +++ b/arch/alpha/kernel/err_ev7.c @@ -117,7 +117,7 @@ ev7_collect_logout_frame_subpackets(struct el_subpacket *el_ptr, } void -ev7_machine_check(u64 vector, u64 la_ptr) +ev7_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr; char *saved_err_prefix = err_print_prefix; @@ -246,7 +246,7 @@ ev7_process_pal_subpacket(struct el_subpacket *header) switch(header->type) { case EL_TYPE__PAL__LOGOUT_FRAME: - printk("%s*** MCHK occurred on LPID %ld (RBOX %llx)\n", + printk("%s*** MCHK occurred on LPID %lld (RBOX %llx)\n", err_print_prefix, packet->by_type.logout.whami, packet->by_type.logout.rbox_whami); diff --git a/arch/alpha/kernel/err_impl.h b/arch/alpha/kernel/err_impl.h index 3c12258158e6..0c010ca4611e 100644 --- a/arch/alpha/kernel/err_impl.h +++ b/arch/alpha/kernel/err_impl.h @@ -60,26 +60,26 @@ extern struct ev7_lf_subpackets * ev7_collect_logout_frame_subpackets(struct el_subpacket *, struct ev7_lf_subpackets *); extern void ev7_register_error_handlers(void); -extern void ev7_machine_check(u64, u64); +extern void ev7_machine_check(unsigned long, unsigned long); /* * err_ev6.c */ extern void ev6_register_error_handlers(void); extern int ev6_process_logout_frame(struct el_common *, int); -extern void ev6_machine_check(u64, u64); +extern void ev6_machine_check(unsigned long, unsigned long); /* * err_marvel.c */ -extern void marvel_machine_check(u64, u64); +extern void marvel_machine_check(unsigned long, unsigned long); extern void marvel_register_error_handlers(void); /* * err_titan.c */ extern int titan_process_logout_frame(struct el_common *, int); -extern void titan_machine_check(u64, u64); +extern void titan_machine_check(unsigned long, unsigned long); extern void titan_register_error_handlers(void); extern int privateer_process_logout_frame(struct el_common *, int); -extern void privateer_machine_check(u64, u64); +extern void privateer_machine_check(unsigned long, unsigned long); diff --git a/arch/alpha/kernel/err_marvel.c b/arch/alpha/kernel/err_marvel.c index 6bfd243efba3..52a79dfc13c6 100644 --- a/arch/alpha/kernel/err_marvel.c +++ b/arch/alpha/kernel/err_marvel.c @@ -1042,7 +1042,7 @@ marvel_process_logout_frame(struct ev7_lf_subpackets *lf_subpackets, int print) } void -marvel_machine_check(u64 vector, u64 la_ptr) +marvel_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr; int (*process_frame)(struct ev7_lf_subpackets *, int) = NULL; diff --git a/arch/alpha/kernel/err_titan.c b/arch/alpha/kernel/err_titan.c index c7e28a88d6e3..f7ed97ce0dfd 100644 --- a/arch/alpha/kernel/err_titan.c +++ b/arch/alpha/kernel/err_titan.c @@ -380,7 +380,7 @@ titan_process_logout_frame(struct el_common *mchk_header, int print) } void -titan_machine_check(u64 vector, u64 la_ptr) +titan_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_common *mchk_header = (struct el_common *)la_ptr; struct el_TITAN_sysdata_mcheck *tmchk = @@ -702,7 +702,7 @@ privateer_process_logout_frame(struct el_common *mchk_header, int print) } void -privateer_machine_check(u64 vector, u64 la_ptr) +privateer_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_common *mchk_header = (struct el_common *)la_ptr; struct el_TITAN_sysdata_mcheck *tmchk = diff --git a/arch/alpha/kernel/proto.h b/arch/alpha/kernel/proto.h index 567f2598d090..3d2627ec9860 100644 --- a/arch/alpha/kernel/proto.h +++ b/arch/alpha/kernel/proto.h @@ -36,7 +36,6 @@ extern void cia_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t); extern struct pci_ops irongate_pci_ops; extern int irongate_pci_clr_err(void); extern void irongate_init_arch(void); -extern void irongate_machine_check(u64, u64); #define irongate_pci_tbi ((void *)0) /* core_lca.c */ @@ -49,7 +48,7 @@ extern void lca_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t); extern struct pci_ops marvel_pci_ops; extern void marvel_init_arch(void); extern void marvel_kill_arch(int); -extern void marvel_machine_check(u64, u64); +extern void marvel_machine_check(unsigned long, unsigned long); extern void marvel_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t); extern int marvel_pa_to_nid(unsigned long); extern int marvel_cpuid_to_nid(int); @@ -86,7 +85,7 @@ extern void t2_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t); extern struct pci_ops titan_pci_ops; extern void titan_init_arch(void); extern void titan_kill_arch(int); -extern void titan_machine_check(u64, u64); +extern void titan_machine_check(unsigned long, unsigned long); extern void titan_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t); extern struct _alpha_agp_info *titan_agp_info(void); -- cgit v1.2.2 From 08a42e86bce511b45ca3eee40f51674b02a777d1 Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Thu, 30 Apr 2009 15:08:47 -0700 Subject: alpha: exception table sorting Exception fixups for sections other than .text (like one in futex_init()) break the natural ordering of fixup entries, so sorting is required. Without that the result of the exception table search depends on phase of the moon. Signed-off-by: Ivan Kokshaysky Cc: Al Viro Cc: Richard Henderson Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/uaccess.h | 2 ++ arch/alpha/mm/extable.c | 40 +++++++++++++++++++++++++++++++++++++++- 2 files changed, 41 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/alpha/include/asm/uaccess.h b/arch/alpha/include/asm/uaccess.h index 163f3053001c..b49ec2f8d6e3 100644 --- a/arch/alpha/include/asm/uaccess.h +++ b/arch/alpha/include/asm/uaccess.h @@ -507,5 +507,7 @@ struct exception_table_entry (pc) + (_fixup)->fixup.bits.nextinsn; \ }) +#define ARCH_HAS_SORT_EXTABLE +#define ARCH_HAS_SEARCH_EXTABLE #endif /* __ALPHA_UACCESS_H */ diff --git a/arch/alpha/mm/extable.c b/arch/alpha/mm/extable.c index dc7aeda15773..62dc379d301a 100644 --- a/arch/alpha/mm/extable.c +++ b/arch/alpha/mm/extable.c @@ -3,11 +3,49 @@ */ #include +#include #include +static inline unsigned long ex_to_addr(const struct exception_table_entry *x) +{ + return (unsigned long)&x->insn + x->insn; +} + +static void swap_ex(void *a, void *b, int size) +{ + struct exception_table_entry *ex_a = a, *ex_b = b; + unsigned long addr_a = ex_to_addr(ex_a), addr_b = ex_to_addr(ex_b); + unsigned int t = ex_a->fixup.unit; + + ex_a->fixup.unit = ex_b->fixup.unit; + ex_b->fixup.unit = t; + ex_a->insn = (int)(addr_b - (unsigned long)&ex_a->insn); + ex_b->insn = (int)(addr_a - (unsigned long)&ex_b->insn); +} + +/* + * The exception table needs to be sorted so that the binary + * search that we use to find entries in it works properly. + * This is used both for the kernel exception table and for + * the exception tables of modules that get loaded. + */ +static int cmp_ex(const void *a, const void *b) +{ + const struct exception_table_entry *x = a, *y = b; + + /* avoid overflow */ + if (ex_to_addr(x) > ex_to_addr(y)) + return 1; + if (ex_to_addr(x) < ex_to_addr(y)) + return -1; + return 0; +} + void sort_extable(struct exception_table_entry *start, struct exception_table_entry *finish) { + sort(start, finish - start, sizeof(struct exception_table_entry), + cmp_ex, swap_ex); } const struct exception_table_entry * @@ -20,7 +58,7 @@ search_extable(const struct exception_table_entry *first, unsigned long mid_value; mid = (last - first) / 2 + first; - mid_value = (unsigned long)&mid->insn + mid->insn; + mid_value = ex_to_addr(mid); if (mid_value == value) return mid; else if (mid_value < value) -- cgit v1.2.2 From 77b4cf5cb0c9d6010a18030a0e0a8d2aaf6b43ec Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Thu, 30 Apr 2009 15:08:48 -0700 Subject: alpha: futex implementation Signed-off-by: Ivan Kokshaysky Cc: Al Viro Cc: Richard Henderson Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/barrier.h | 2 + arch/alpha/include/asm/futex.h | 118 +++++++++++++++++++++++++++++++++++++-- 2 files changed, 116 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/alpha/include/asm/barrier.h b/arch/alpha/include/asm/barrier.h index ac78eba909bc..ce8860a0b32d 100644 --- a/arch/alpha/include/asm/barrier.h +++ b/arch/alpha/include/asm/barrier.h @@ -16,11 +16,13 @@ __asm__ __volatile__("wmb": : :"memory") __asm__ __volatile__("mb": : :"memory") #ifdef CONFIG_SMP +#define __ASM_SMP_MB "\tmb\n" #define smp_mb() mb() #define smp_rmb() rmb() #define smp_wmb() wmb() #define smp_read_barrier_depends() read_barrier_depends() #else +#define __ASM_SMP_MB #define smp_mb() barrier() #define smp_rmb() barrier() #define smp_wmb() barrier() diff --git a/arch/alpha/include/asm/futex.h b/arch/alpha/include/asm/futex.h index 6a332a9f099c..945de222ab91 100644 --- a/arch/alpha/include/asm/futex.h +++ b/arch/alpha/include/asm/futex.h @@ -1,6 +1,116 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H +#ifndef _ASM_ALPHA_FUTEX_H +#define _ASM_ALPHA_FUTEX_H -#include +#ifdef __KERNEL__ -#endif +#include +#include +#include +#include + +#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ + __asm__ __volatile__( \ + __ASM_SMP_MB \ + "1: ldl_l %0,0(%2)\n" \ + insn \ + "2: stl_c %1,0(%2)\n" \ + " beq %1,4f\n" \ + " mov $31,%1\n" \ + "3: .subsection 2\n" \ + "4: br 1b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .long 1b-.\n" \ + " lda $31,3b-1b(%1)\n" \ + " .long 2b-.\n" \ + " lda $31,3b-2b(%1)\n" \ + " .previous\n" \ + : "=&r" (oldval), "=&r"(ret) \ + : "r" (uaddr), "r"(oparg) \ + : "memory") + +static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr) +{ + int op = (encoded_op >> 28) & 7; + int cmp = (encoded_op >> 24) & 15; + int oparg = (encoded_op << 8) >> 20; + int cmparg = (encoded_op << 20) >> 20; + int oldval = 0, ret; + if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) + oparg = 1 << oparg; + + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + pagefault_disable(); + + switch (op) { + case FUTEX_OP_SET: + __futex_atomic_op("mov %3,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_ADD: + __futex_atomic_op("addl %0,%3,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_OR: + __futex_atomic_op("or %0,%3,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_ANDN: + __futex_atomic_op("andnot %0,%3,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_XOR: + __futex_atomic_op("xor %0,%3,%1\n", ret, oldval, uaddr, oparg); + break; + default: + ret = -ENOSYS; + } + + pagefault_enable(); + + if (!ret) { + switch (cmp) { + case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; + case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; + case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; + case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; + case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; + case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; + default: ret = -ENOSYS; + } + } + return ret; +} + +static inline int +futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) +{ + int prev, cmp; + + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + __asm__ __volatile__ ( + __ASM_SMP_MB + "1: ldl_l %0,0(%2)\n" + " cmpeq %0,%3,%1\n" + " beq %1,3f\n" + " mov %4,%1\n" + "2: stl_c %1,0(%2)\n" + " beq %1,4f\n" + "3: .subsection 2\n" + "4: br 1b\n" + " .previous\n" + " .section __ex_table,\"a\"\n" + " .long 1b-.\n" + " lda $31,3b-1b(%0)\n" + " .long 2b-.\n" + " lda $31,3b-2b(%0)\n" + " .previous\n" + : "=&r"(prev), "=&r"(cmp) + : "r"(uaddr), "r"((long)oldval), "r"(newval) + : "memory"); + + return prev; +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_ALPHA_FUTEX_H */ -- cgit v1.2.2 From 74641f584da8eccf30becfbb5507ab457187db22 Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Thu, 30 Apr 2009 15:08:49 -0700 Subject: alpha: binfmt_aout fix This fixes the problem introduced by commit 3bfacef412 (get rid of special-casing the /sbin/loader on alpha): osf/1 ecoff binary segfaults when binfmt_aout built as module. That happens because aout binary handler gets on the top of the binfmt list due to late registration, and kernel attempts to execute the binary without preparatory work that must be done by binfmt_loader. Fixed by changing the registration order of the default binfmt handlers using list_add_tail() and introducing insert_binfmt() function which places new handler on the top of the binfmt list. This might be generally useful for installing arch-specific frontends for default handlers or just for overriding them. Signed-off-by: Ivan Kokshaysky Cc: Al Viro Cc: Richard Henderson Signed-off-by: Linus Torvalds --- arch/alpha/kernel/Makefile | 6 +++++- arch/alpha/kernel/binfmt_loader.c | 2 +- 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile index a427538252f8..7739a62440a7 100644 --- a/arch/alpha/kernel/Makefile +++ b/arch/alpha/kernel/Makefile @@ -8,7 +8,7 @@ EXTRA_CFLAGS := -Werror -Wno-sign-compare obj-y := entry.o traps.o process.o init_task.o osf_sys.o irq.o \ irq_alpha.o signal.o setup.o ptrace.o time.o \ - alpha_ksyms.o systbls.o err_common.o io.o binfmt_loader.o + alpha_ksyms.o systbls.o err_common.o io.o obj-$(CONFIG_VGA_HOSE) += console.o obj-$(CONFIG_SMP) += smp.o @@ -43,6 +43,10 @@ else # Misc support obj-$(CONFIG_ALPHA_SRM) += srmcons.o +ifdef CONFIG_BINFMT_AOUT +obj-y += binfmt_loader.o +endif + # Core logic support obj-$(CONFIG_ALPHA_APECS) += core_apecs.o obj-$(CONFIG_ALPHA_CIA) += core_cia.o diff --git a/arch/alpha/kernel/binfmt_loader.c b/arch/alpha/kernel/binfmt_loader.c index 4a0af906b00a..3fcfad410130 100644 --- a/arch/alpha/kernel/binfmt_loader.c +++ b/arch/alpha/kernel/binfmt_loader.c @@ -46,6 +46,6 @@ static struct linux_binfmt loader_format = { static int __init init_loader_binfmt(void) { - return register_binfmt(&loader_format); + return insert_binfmt(&loader_format); } arch_initcall(init_loader_binfmt); -- cgit v1.2.2 From 0763ed2355198cdef2f6a2098e9d52eb1fe4365d Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 30 Apr 2009 15:08:50 -0700 Subject: of: make of_(un)register_platform_driver common code Some drivers using of_register_platform_driver() wrapper break on sparc because the wrapper isn't in the header file. This patch moves it from Microblaze and PowerPC implementations and makes it common code. Fixes this sparc64 allmodconfig build error (at least): drivers/leds/leds-gpio.c: In function `gpio_led_init': drivers/leds/leds-gpio.c:295: error: implicit declaration of function `of_register_platform_driver' drivers/leds/leds-gpio.c: In function `gpio_led_exit': drivers/leds/leds-gpio.c:311: error: implicit declaration of function `of_unregister_platform_driver' Signed-off-by: Grant Likely Acked-by: David S. Miller Cc: Michal Simek Cc: Benjamin Herrenschmidt Cc: Stephen Rothwell Cc: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/microblaze/include/asm/of_platform.h | 10 ---------- arch/powerpc/include/asm/of_platform.h | 10 ---------- 2 files changed, 20 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/include/asm/of_platform.h b/arch/microblaze/include/asm/of_platform.h index 187c0eedaece..37491276c6ca 100644 --- a/arch/microblaze/include/asm/of_platform.h +++ b/arch/microblaze/include/asm/of_platform.h @@ -36,16 +36,6 @@ static const struct of_device_id of_default_bus_ids[] = { {}, }; -/* Platform drivers register/unregister */ -static inline int of_register_platform_driver(struct of_platform_driver *drv) -{ - return of_register_driver(drv, &of_platform_bus_type); -} -static inline void of_unregister_platform_driver(struct of_platform_driver *drv) -{ - of_unregister_driver(drv); -} - /* Platform devices and busses creation */ extern struct of_device *of_platform_device_create(struct device_node *np, const char *bus_id, diff --git a/arch/powerpc/include/asm/of_platform.h b/arch/powerpc/include/asm/of_platform.h index 53b46507ffde..d4aaa3489440 100644 --- a/arch/powerpc/include/asm/of_platform.h +++ b/arch/powerpc/include/asm/of_platform.h @@ -11,16 +11,6 @@ * */ -/* Platform drivers register/unregister */ -static inline int of_register_platform_driver(struct of_platform_driver *drv) -{ - return of_register_driver(drv, &of_platform_bus_type); -} -static inline void of_unregister_platform_driver(struct of_platform_driver *drv) -{ - of_unregister_driver(drv); -} - /* Platform devices and busses creation */ extern struct of_device *of_platform_device_create(struct device_node *np, const char *bus_id, -- cgit v1.2.2 From 9fffb55f66127b52c937ede5196ebfa0c0d50bce Mon Sep 17 00:00:00 2001 From: David Gibson Date: Thu, 30 Apr 2009 15:25:53 +1000 Subject: Move dtc and libfdt sources from arch/powerpc/boot to scripts/dtc The powerpc kernel always requires an Open Firmware like device tree to supply device information. On systems without OF, this comes from a flattened device tree blob. This blob is usually generated by dtc, a tool which compiles a text description of the device tree into the flattened format used by the kernel. Sometimes, the bootwrapper makes small changes to the pre-compiled device tree blob (e.g. filling in the size of RAM). To do this it uses the libfdt library. Because these are only used on powerpc, the code for both these tools is included under arch/powerpc/boot (these were imported and are periodically updated from the upstream dtc tree). However, the microblaze architecture, currently being prepared for merging to mainline also uses dtc to produce device tree blobs. A few other archs have also mentioned some interest in using dtc. Therefore, this patch moves dtc and libfdt from arch/powerpc into scripts, where it can be used by any architecture. The vast bulk of this patch is a literal move, the rest is adjusting the various Makefiles to use dtc and libfdt correctly from their new locations. Signed-off-by: David Gibson Signed-off-by: Linus Torvalds --- arch/powerpc/Kconfig | 4 + arch/powerpc/boot/Makefile | 67 +- arch/powerpc/boot/dtc-src/Makefile.dtc | 9 - arch/powerpc/boot/dtc-src/checks.c | 587 ------ arch/powerpc/boot/dtc-src/data.c | 321 --- arch/powerpc/boot/dtc-src/dtc-lexer.l | 320 --- arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped | 2187 -------------------- arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped | 2040 ------------------ arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped | 113 - arch/powerpc/boot/dtc-src/dtc-parser.y | 379 ---- arch/powerpc/boot/dtc-src/dtc.c | 226 -- arch/powerpc/boot/dtc-src/dtc.h | 246 --- arch/powerpc/boot/dtc-src/flattree.c | 906 -------- arch/powerpc/boot/dtc-src/fstree.c | 92 - arch/powerpc/boot/dtc-src/libfdt_env.h | 23 - arch/powerpc/boot/dtc-src/livetree.c | 308 --- arch/powerpc/boot/dtc-src/srcpos.c | 116 -- arch/powerpc/boot/dtc-src/srcpos.h | 85 - arch/powerpc/boot/dtc-src/treesource.c | 278 --- arch/powerpc/boot/dtc-src/version_gen.h | 1 - arch/powerpc/boot/libfdt/Makefile.libfdt | 8 - arch/powerpc/boot/libfdt/fdt.c | 201 -- arch/powerpc/boot/libfdt/fdt.h | 60 - arch/powerpc/boot/libfdt/fdt_ro.c | 469 ----- arch/powerpc/boot/libfdt/fdt_rw.c | 463 ----- arch/powerpc/boot/libfdt/fdt_strerror.c | 96 - arch/powerpc/boot/libfdt/fdt_sw.c | 257 --- arch/powerpc/boot/libfdt/fdt_wip.c | 145 -- arch/powerpc/boot/libfdt/libfdt.h | 1076 ---------- arch/powerpc/boot/libfdt/libfdt_internal.h | 95 - arch/powerpc/boot/simpleboot.c | 2 +- 31 files changed, 28 insertions(+), 11152 deletions(-) delete mode 100644 arch/powerpc/boot/dtc-src/Makefile.dtc delete mode 100644 arch/powerpc/boot/dtc-src/checks.c delete mode 100644 arch/powerpc/boot/dtc-src/data.c delete mode 100644 arch/powerpc/boot/dtc-src/dtc-lexer.l delete mode 100644 arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped delete mode 100644 arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped delete mode 100644 arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped delete mode 100644 arch/powerpc/boot/dtc-src/dtc-parser.y delete mode 100644 arch/powerpc/boot/dtc-src/dtc.c delete mode 100644 arch/powerpc/boot/dtc-src/dtc.h delete mode 100644 arch/powerpc/boot/dtc-src/flattree.c delete mode 100644 arch/powerpc/boot/dtc-src/fstree.c delete mode 100644 arch/powerpc/boot/dtc-src/libfdt_env.h delete mode 100644 arch/powerpc/boot/dtc-src/livetree.c delete mode 100644 arch/powerpc/boot/dtc-src/srcpos.c delete mode 100644 arch/powerpc/boot/dtc-src/srcpos.h delete mode 100644 arch/powerpc/boot/dtc-src/treesource.c delete mode 100644 arch/powerpc/boot/dtc-src/version_gen.h delete mode 100644 arch/powerpc/boot/libfdt/Makefile.libfdt delete mode 100644 arch/powerpc/boot/libfdt/fdt.c delete mode 100644 arch/powerpc/boot/libfdt/fdt.h delete mode 100644 arch/powerpc/boot/libfdt/fdt_ro.c delete mode 100644 arch/powerpc/boot/libfdt/fdt_rw.c delete mode 100644 arch/powerpc/boot/libfdt/fdt_strerror.c delete mode 100644 arch/powerpc/boot/libfdt/fdt_sw.c delete mode 100644 arch/powerpc/boot/libfdt/fdt_wip.c delete mode 100644 arch/powerpc/boot/libfdt/libfdt.h delete mode 100644 arch/powerpc/boot/libfdt/libfdt_internal.h (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 4c7804551362..a0d1146a0578 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -181,6 +181,10 @@ config SYS_SUPPORTS_APM_EMULATION default y if PMAC_APM_EMU bool +config DTC + bool + default y + config DEFAULT_UIMAGE bool help diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 4458abb67c51..8da2bf963b57 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -33,7 +33,7 @@ ifeq ($(call cc-option-yn, -fstack-protector),y) BOOTCFLAGS += -fno-stack-protector endif -BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) -I$(srctree)/$(src)/libfdt +BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) DTS_FLAGS ?= -p 1024 @@ -53,9 +53,14 @@ zliblinuxheader := zlib.h zconf.h zutil.h $(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \ $(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader)) -src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c +libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c +libfdtheader := fdt.h libfdt.h libfdt_internal.h + +$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o): \ + $(addprefix $(obj)/,$(libfdtheader)) + src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \ - $(addprefix libfdt/,$(src-libfdt)) libfdt-wrapper.c \ + $(libfdt) libfdt-wrapper.c \ ns16550.c serial.c simple_alloc.c div64.S util.S \ gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \ 4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \ @@ -96,6 +101,12 @@ $(addprefix $(obj)/,$(zlibheader)): $(obj)/%: $(srctree)/lib/zlib_inflate/% $(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/% $(call cmd,copy_zliblinuxheader) +quiet_cmd_copy_libfdt = COPY $@ + cmd_copy_libfdt = cp $< $@ + +$(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/% + $(call cmd,copy_libfdt) + $(obj)/empty.c: @touch $@ @@ -103,6 +114,7 @@ $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds: $(obj)/%: $(srct @cp $< $@ clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \ + $(libfdt) $(libfdtheader) \ empty.c zImage.coff.lds zImage.ps3.lds zImage.lds quiet_cmd_bootcc = BOOTCC $@ @@ -114,6 +126,8 @@ quiet_cmd_bootas = BOOTAS $@ quiet_cmd_bootar = BOOTAR $@ cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@ +$(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE + $(call if_changed_dep,bootcc) $(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE $(Q)mkdir -p $(dir $@) $(call if_changed_dep,bootcc) @@ -124,7 +138,7 @@ $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE $(obj)/wrapper.a: $(obj-wlib) FORCE $(call if_changed,bootar) -hostprogs-y := addnote addRamDisk hack-coff mktree dtc +hostprogs-y := addnote addRamDisk hack-coff mktree targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a) extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ @@ -133,46 +147,9 @@ extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ dtstree := $(srctree)/$(src)/dts wrapper :=$(srctree)/$(src)/wrapper -wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree dtc) \ +wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \ $(wrapper) FORCE -############# -# Bits for building dtc -# DTC_GENPARSER := 1 # Uncomment to rebuild flex/bison output - -dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o srcpos.o checks.o -dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o -dtc-objs := $(addprefix dtc-src/, $(dtc-objs)) - -# prerequisites on generated files needs to be explicit -$(obj)/dtc-src/dtc-parser.tab.o: $(obj)/dtc-src/dtc-parser.tab.c $(obj)/dtc-src/dtc-parser.tab.h -$(obj)/dtc-src/dtc-lexer.lex.o: $(obj)/dtc-src/dtc-lexer.lex.c $(obj)/dtc-src/dtc-parser.tab.h - -HOSTCFLAGS += -I$(src)/dtc-src/ -I$(src)/libfdt/ - -targets += dtc-src/dtc-parser.tab.c -targets += dtc-src/dtc-lexer.lex.c - -clean-files += dtc-src/dtc-parser.tab.h - -ifdef DTC_GENPARSER -BISON = bison -FLEX = flex - -quiet_cmd_bison = BISON $@ - cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped -quiet_cmd_flex = FLEX $@ - cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped - -$(obj)/dtc-src/dtc-parser.tab.c: $(src)/dtc-src/dtc-parser.y FORCE - $(call if_changed,bison) - -$(obj)/dtc-src/dtc-parser.tab.h: $(obj)/dtc-src/dtc-parser.tab.c - -$(obj)/dtc-src/dtc-lexer.lex.c: $(src)/dtc-src/dtc-lexer.l FORCE - $(call if_changed,flex) -endif - ############# # Bits for building various flavours of zImage @@ -347,8 +324,10 @@ $(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb) # Rule to build device tree blobs -$(obj)/%.dtb: $(dtstree)/%.dts $(obj)/dtc - $(obj)/dtc -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts +DTC = $(objtree)/scripts/dtc/dtc + +$(obj)/%.dtb: $(dtstree)/%.dts + $(DTC) -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts # If there isn't a platform selected then just strip the vmlinux. ifeq (,$(image-y)) diff --git a/arch/powerpc/boot/dtc-src/Makefile.dtc b/arch/powerpc/boot/dtc-src/Makefile.dtc deleted file mode 100644 index 6ddf9ecac669..000000000000 --- a/arch/powerpc/boot/dtc-src/Makefile.dtc +++ /dev/null @@ -1,9 +0,0 @@ -# Makefile.dtc -# -# This is not a complete Makefile of itself. Instead, it is designed to -# be easily embeddable into other systems of Makefiles. -# -DTC_SRCS = dtc.c flattree.c fstree.c data.c livetree.c treesource.c srcpos.c \ - checks.c -DTC_GEN_SRCS = dtc-lexer.lex.c dtc-parser.tab.c -DTC_OBJS = $(DTC_SRCS:%.c=%.o) $(DTC_GEN_SRCS:%.c=%.o) diff --git a/arch/powerpc/boot/dtc-src/checks.c b/arch/powerpc/boot/dtc-src/checks.c deleted file mode 100644 index 95485796f253..000000000000 --- a/arch/powerpc/boot/dtc-src/checks.c +++ /dev/null @@ -1,587 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2007. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" - -#ifdef TRACE_CHECKS -#define TRACE(c, ...) \ - do { \ - fprintf(stderr, "=== %s: ", (c)->name); \ - fprintf(stderr, __VA_ARGS__); \ - fprintf(stderr, "\n"); \ - } while (0) -#else -#define TRACE(c, fmt, ...) do { } while (0) -#endif - -enum checklevel { - IGNORE = 0, - WARN = 1, - ERROR = 2, -}; - -enum checkstatus { - UNCHECKED = 0, - PREREQ, - PASSED, - FAILED, -}; - -struct check; - -typedef void (*tree_check_fn)(struct check *c, struct node *dt); -typedef void (*node_check_fn)(struct check *c, struct node *dt, struct node *node); -typedef void (*prop_check_fn)(struct check *c, struct node *dt, - struct node *node, struct property *prop); - -struct check { - const char *name; - tree_check_fn tree_fn; - node_check_fn node_fn; - prop_check_fn prop_fn; - void *data; - enum checklevel level; - enum checkstatus status; - int inprogress; - int num_prereqs; - struct check **prereq; -}; - -#define CHECK(nm, tfn, nfn, pfn, d, lvl, ...) \ - static struct check *nm##_prereqs[] = { __VA_ARGS__ }; \ - static struct check nm = { \ - .name = #nm, \ - .tree_fn = (tfn), \ - .node_fn = (nfn), \ - .prop_fn = (pfn), \ - .data = (d), \ - .level = (lvl), \ - .status = UNCHECKED, \ - .num_prereqs = ARRAY_SIZE(nm##_prereqs), \ - .prereq = nm##_prereqs, \ - }; - -#define TREE_CHECK(nm, d, lvl, ...) \ - CHECK(nm, check_##nm, NULL, NULL, d, lvl, __VA_ARGS__) -#define NODE_CHECK(nm, d, lvl, ...) \ - CHECK(nm, NULL, check_##nm, NULL, d, lvl, __VA_ARGS__) -#define PROP_CHECK(nm, d, lvl, ...) \ - CHECK(nm, NULL, NULL, check_##nm, d, lvl, __VA_ARGS__) -#define BATCH_CHECK(nm, lvl, ...) \ - CHECK(nm, NULL, NULL, NULL, NULL, lvl, __VA_ARGS__) - -#ifdef __GNUC__ -static inline void check_msg(struct check *c, const char *fmt, ...) __attribute__((format (printf, 2, 3))); -#endif -static inline void check_msg(struct check *c, const char *fmt, ...) -{ - va_list ap; - va_start(ap, fmt); - - if ((c->level < WARN) || (c->level <= quiet)) - return; /* Suppress message */ - - fprintf(stderr, "%s (%s): ", - (c->level == ERROR) ? "ERROR" : "Warning", c->name); - vfprintf(stderr, fmt, ap); - fprintf(stderr, "\n"); -} - -#define FAIL(c, ...) \ - do { \ - TRACE((c), "\t\tFAILED at %s:%d", __FILE__, __LINE__); \ - (c)->status = FAILED; \ - check_msg((c), __VA_ARGS__); \ - } while (0) - -static void check_nodes_props(struct check *c, struct node *dt, struct node *node) -{ - struct node *child; - struct property *prop; - - TRACE(c, "%s", node->fullpath); - if (c->node_fn) - c->node_fn(c, dt, node); - - if (c->prop_fn) - for_each_property(node, prop) { - TRACE(c, "%s\t'%s'", node->fullpath, prop->name); - c->prop_fn(c, dt, node, prop); - } - - for_each_child(node, child) - check_nodes_props(c, dt, child); -} - -static int run_check(struct check *c, struct node *dt) -{ - int error = 0; - int i; - - assert(!c->inprogress); - - if (c->status != UNCHECKED) - goto out; - - c->inprogress = 1; - - for (i = 0; i < c->num_prereqs; i++) { - struct check *prq = c->prereq[i]; - error |= run_check(prq, dt); - if (prq->status != PASSED) { - c->status = PREREQ; - check_msg(c, "Failed prerequisite '%s'", - c->prereq[i]->name); - } - } - - if (c->status != UNCHECKED) - goto out; - - if (c->node_fn || c->prop_fn) - check_nodes_props(c, dt, dt); - - if (c->tree_fn) - c->tree_fn(c, dt); - if (c->status == UNCHECKED) - c->status = PASSED; - - TRACE(c, "\tCompleted, status %d", c->status); - -out: - c->inprogress = 0; - if ((c->status != PASSED) && (c->level == ERROR)) - error = 1; - return error; -} - -/* - * Utility check functions - */ - -static void check_is_string(struct check *c, struct node *root, - struct node *node) -{ - struct property *prop; - char *propname = c->data; - - prop = get_property(node, propname); - if (!prop) - return; /* Not present, assumed ok */ - - if (!data_is_one_string(prop->val)) - FAIL(c, "\"%s\" property in %s is not a string", - propname, node->fullpath); -} -#define CHECK_IS_STRING(nm, propname, lvl) \ - CHECK(nm, NULL, check_is_string, NULL, (propname), (lvl)) - -static void check_is_cell(struct check *c, struct node *root, - struct node *node) -{ - struct property *prop; - char *propname = c->data; - - prop = get_property(node, propname); - if (!prop) - return; /* Not present, assumed ok */ - - if (prop->val.len != sizeof(cell_t)) - FAIL(c, "\"%s\" property in %s is not a single cell", - propname, node->fullpath); -} -#define CHECK_IS_CELL(nm, propname, lvl) \ - CHECK(nm, NULL, check_is_cell, NULL, (propname), (lvl)) - -/* - * Structural check functions - */ - -static void check_duplicate_node_names(struct check *c, struct node *dt, - struct node *node) -{ - struct node *child, *child2; - - for_each_child(node, child) - for (child2 = child->next_sibling; - child2; - child2 = child2->next_sibling) - if (streq(child->name, child2->name)) - FAIL(c, "Duplicate node name %s", - child->fullpath); -} -NODE_CHECK(duplicate_node_names, NULL, ERROR); - -static void check_duplicate_property_names(struct check *c, struct node *dt, - struct node *node) -{ - struct property *prop, *prop2; - - for_each_property(node, prop) - for (prop2 = prop->next; prop2; prop2 = prop2->next) - if (streq(prop->name, prop2->name)) - FAIL(c, "Duplicate property name %s in %s", - prop->name, node->fullpath); -} -NODE_CHECK(duplicate_property_names, NULL, ERROR); - -#define LOWERCASE "abcdefghijklmnopqrstuvwxyz" -#define UPPERCASE "ABCDEFGHIJKLMNOPQRSTUVWXYZ" -#define DIGITS "0123456789" -#define PROPNODECHARS LOWERCASE UPPERCASE DIGITS ",._+*#?-" - -static void check_node_name_chars(struct check *c, struct node *dt, - struct node *node) -{ - int n = strspn(node->name, c->data); - - if (n < strlen(node->name)) - FAIL(c, "Bad character '%c' in node %s", - node->name[n], node->fullpath); -} -NODE_CHECK(node_name_chars, PROPNODECHARS "@", ERROR); - -static void check_node_name_format(struct check *c, struct node *dt, - struct node *node) -{ - if (strchr(get_unitname(node), '@')) - FAIL(c, "Node %s has multiple '@' characters in name", - node->fullpath); -} -NODE_CHECK(node_name_format, NULL, ERROR, &node_name_chars); - -static void check_property_name_chars(struct check *c, struct node *dt, - struct node *node, struct property *prop) -{ - int n = strspn(prop->name, c->data); - - if (n < strlen(prop->name)) - FAIL(c, "Bad character '%c' in property name \"%s\", node %s", - prop->name[n], prop->name, node->fullpath); -} -PROP_CHECK(property_name_chars, PROPNODECHARS, ERROR); - -static void check_explicit_phandles(struct check *c, struct node *root, - struct node *node) -{ - struct property *prop; - struct node *other; - cell_t phandle; - - prop = get_property(node, "linux,phandle"); - if (! prop) - return; /* No phandle, that's fine */ - - if (prop->val.len != sizeof(cell_t)) { - FAIL(c, "%s has bad length (%d) linux,phandle property", - node->fullpath, prop->val.len); - return; - } - - phandle = propval_cell(prop); - if ((phandle == 0) || (phandle == -1)) { - FAIL(c, "%s has invalid linux,phandle value 0x%x", - node->fullpath, phandle); - return; - } - - other = get_node_by_phandle(root, phandle); - if (other) { - FAIL(c, "%s has duplicated phandle 0x%x (seen before at %s)", - node->fullpath, phandle, other->fullpath); - return; - } - - node->phandle = phandle; -} -NODE_CHECK(explicit_phandles, NULL, ERROR); - -static void check_name_properties(struct check *c, struct node *root, - struct node *node) -{ - struct property **pp, *prop = NULL; - - for (pp = &node->proplist; *pp; pp = &((*pp)->next)) - if (streq((*pp)->name, "name")) { - prop = *pp; - break; - } - - if (!prop) - return; /* No name property, that's fine */ - - if ((prop->val.len != node->basenamelen+1) - || (memcmp(prop->val.val, node->name, node->basenamelen) != 0)) { - FAIL(c, "\"name\" property in %s is incorrect (\"%s\" instead" - " of base node name)", node->fullpath, prop->val.val); - } else { - /* The name property is correct, and therefore redundant. - * Delete it */ - *pp = prop->next; - free(prop->name); - data_free(prop->val); - free(prop); - } -} -CHECK_IS_STRING(name_is_string, "name", ERROR); -NODE_CHECK(name_properties, NULL, ERROR, &name_is_string); - -/* - * Reference fixup functions - */ - -static void fixup_phandle_references(struct check *c, struct node *dt, - struct node *node, struct property *prop) -{ - struct marker *m = prop->val.markers; - struct node *refnode; - cell_t phandle; - - for_each_marker_of_type(m, REF_PHANDLE) { - assert(m->offset + sizeof(cell_t) <= prop->val.len); - - refnode = get_node_by_ref(dt, m->ref); - if (! refnode) { - FAIL(c, "Reference to non-existent node or label \"%s\"\n", - m->ref); - continue; - } - - phandle = get_node_phandle(dt, refnode); - *((cell_t *)(prop->val.val + m->offset)) = cpu_to_fdt32(phandle); - } -} -CHECK(phandle_references, NULL, NULL, fixup_phandle_references, NULL, ERROR, - &duplicate_node_names, &explicit_phandles); - -static void fixup_path_references(struct check *c, struct node *dt, - struct node *node, struct property *prop) -{ - struct marker *m = prop->val.markers; - struct node *refnode; - char *path; - - for_each_marker_of_type(m, REF_PATH) { - assert(m->offset <= prop->val.len); - - refnode = get_node_by_ref(dt, m->ref); - if (!refnode) { - FAIL(c, "Reference to non-existent node or label \"%s\"\n", - m->ref); - continue; - } - - path = refnode->fullpath; - prop->val = data_insert_at_marker(prop->val, m, path, - strlen(path) + 1); - } -} -CHECK(path_references, NULL, NULL, fixup_path_references, NULL, ERROR, - &duplicate_node_names); - -/* - * Semantic checks - */ -CHECK_IS_CELL(address_cells_is_cell, "#address-cells", WARN); -CHECK_IS_CELL(size_cells_is_cell, "#size-cells", WARN); -CHECK_IS_CELL(interrupt_cells_is_cell, "#interrupt-cells", WARN); - -CHECK_IS_STRING(device_type_is_string, "device_type", WARN); -CHECK_IS_STRING(model_is_string, "model", WARN); -CHECK_IS_STRING(status_is_string, "status", WARN); - -static void fixup_addr_size_cells(struct check *c, struct node *dt, - struct node *node) -{ - struct property *prop; - - node->addr_cells = -1; - node->size_cells = -1; - - prop = get_property(node, "#address-cells"); - if (prop) - node->addr_cells = propval_cell(prop); - - prop = get_property(node, "#size-cells"); - if (prop) - node->size_cells = propval_cell(prop); -} -CHECK(addr_size_cells, NULL, fixup_addr_size_cells, NULL, NULL, WARN, - &address_cells_is_cell, &size_cells_is_cell); - -#define node_addr_cells(n) \ - (((n)->addr_cells == -1) ? 2 : (n)->addr_cells) -#define node_size_cells(n) \ - (((n)->size_cells == -1) ? 1 : (n)->size_cells) - -static void check_reg_format(struct check *c, struct node *dt, - struct node *node) -{ - struct property *prop; - int addr_cells, size_cells, entrylen; - - prop = get_property(node, "reg"); - if (!prop) - return; /* No "reg", that's fine */ - - if (!node->parent) { - FAIL(c, "Root node has a \"reg\" property"); - return; - } - - if (prop->val.len == 0) - FAIL(c, "\"reg\" property in %s is empty", node->fullpath); - - addr_cells = node_addr_cells(node->parent); - size_cells = node_size_cells(node->parent); - entrylen = (addr_cells + size_cells) * sizeof(cell_t); - - if ((prop->val.len % entrylen) != 0) - FAIL(c, "\"reg\" property in %s has invalid length (%d bytes) " - "(#address-cells == %d, #size-cells == %d)", - node->fullpath, prop->val.len, addr_cells, size_cells); -} -NODE_CHECK(reg_format, NULL, WARN, &addr_size_cells); - -static void check_ranges_format(struct check *c, struct node *dt, - struct node *node) -{ - struct property *prop; - int c_addr_cells, p_addr_cells, c_size_cells, p_size_cells, entrylen; - - prop = get_property(node, "ranges"); - if (!prop) - return; - - if (!node->parent) { - FAIL(c, "Root node has a \"ranges\" property"); - return; - } - - p_addr_cells = node_addr_cells(node->parent); - p_size_cells = node_size_cells(node->parent); - c_addr_cells = node_addr_cells(node); - c_size_cells = node_size_cells(node); - entrylen = (p_addr_cells + c_addr_cells + c_size_cells) * sizeof(cell_t); - - if (prop->val.len == 0) { - if (p_addr_cells != c_addr_cells) - FAIL(c, "%s has empty \"ranges\" property but its " - "#address-cells (%d) differs from %s (%d)", - node->fullpath, c_addr_cells, node->parent->fullpath, - p_addr_cells); - if (p_size_cells != c_size_cells) - FAIL(c, "%s has empty \"ranges\" property but its " - "#size-cells (%d) differs from %s (%d)", - node->fullpath, c_size_cells, node->parent->fullpath, - p_size_cells); - } else if ((prop->val.len % entrylen) != 0) { - FAIL(c, "\"ranges\" property in %s has invalid length (%d bytes) " - "(parent #address-cells == %d, child #address-cells == %d, " - "#size-cells == %d)", node->fullpath, prop->val.len, - p_addr_cells, c_addr_cells, c_size_cells); - } -} -NODE_CHECK(ranges_format, NULL, WARN, &addr_size_cells); - -/* - * Style checks - */ -static void check_avoid_default_addr_size(struct check *c, struct node *dt, - struct node *node) -{ - struct property *reg, *ranges; - - if (!node->parent) - return; /* Ignore root node */ - - reg = get_property(node, "reg"); - ranges = get_property(node, "ranges"); - - if (!reg && !ranges) - return; - - if ((node->parent->addr_cells == -1)) - FAIL(c, "Relying on default #address-cells value for %s", - node->fullpath); - - if ((node->parent->size_cells == -1)) - FAIL(c, "Relying on default #size-cells value for %s", - node->fullpath); -} -NODE_CHECK(avoid_default_addr_size, NULL, WARN, &addr_size_cells); - -static void check_obsolete_chosen_interrupt_controller(struct check *c, - struct node *dt) -{ - struct node *chosen; - struct property *prop; - - chosen = get_node_by_path(dt, "/chosen"); - if (!chosen) - return; - - prop = get_property(chosen, "interrupt-controller"); - if (prop) - FAIL(c, "/chosen has obsolete \"interrupt-controller\" " - "property"); -} -TREE_CHECK(obsolete_chosen_interrupt_controller, NULL, WARN); - -static struct check *check_table[] = { - &duplicate_node_names, &duplicate_property_names, - &node_name_chars, &node_name_format, &property_name_chars, - &name_is_string, &name_properties, - &explicit_phandles, - &phandle_references, &path_references, - - &address_cells_is_cell, &size_cells_is_cell, &interrupt_cells_is_cell, - &device_type_is_string, &model_is_string, &status_is_string, - - &addr_size_cells, ®_format, &ranges_format, - - &avoid_default_addr_size, - &obsolete_chosen_interrupt_controller, -}; - -void process_checks(int force, struct boot_info *bi) -{ - struct node *dt = bi->dt; - int i; - int error = 0; - - for (i = 0; i < ARRAY_SIZE(check_table); i++) { - struct check *c = check_table[i]; - - if (c->level != IGNORE) - error = error || run_check(c, dt); - } - - if (error) { - if (!force) { - fprintf(stderr, "ERROR: Input tree has errors, aborting " - "(use -f to force output)\n"); - exit(2); - } else if (quiet < 3) { - fprintf(stderr, "Warning: Input tree has errors, " - "output forced\n"); - } - } -} diff --git a/arch/powerpc/boot/dtc-src/data.c b/arch/powerpc/boot/dtc-src/data.c deleted file mode 100644 index dd2e3d39d4c1..000000000000 --- a/arch/powerpc/boot/dtc-src/data.c +++ /dev/null @@ -1,321 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" - -void data_free(struct data d) -{ - struct marker *m, *nm; - - m = d.markers; - while (m) { - nm = m->next; - free(m->ref); - free(m); - m = nm; - } - - if (d.val) - free(d.val); -} - -struct data data_grow_for(struct data d, int xlen) -{ - struct data nd; - int newsize; - - if (xlen == 0) - return d; - - nd = d; - - newsize = xlen; - - while ((d.len + xlen) > newsize) - newsize *= 2; - - nd.val = xrealloc(d.val, newsize); - - return nd; -} - -struct data data_copy_mem(const char *mem, int len) -{ - struct data d; - - d = data_grow_for(empty_data, len); - - d.len = len; - memcpy(d.val, mem, len); - - return d; -} - -static char get_oct_char(const char *s, int *i) -{ - char x[4]; - char *endx; - long val; - - x[3] = '\0'; - strncpy(x, s + *i, 3); - - val = strtol(x, &endx, 8); - - assert(endx > x); - - (*i) += endx - x; - return val; -} - -static char get_hex_char(const char *s, int *i) -{ - char x[3]; - char *endx; - long val; - - x[2] = '\0'; - strncpy(x, s + *i, 2); - - val = strtol(x, &endx, 16); - if (!(endx > x)) - die("\\x used with no following hex digits\n"); - - (*i) += endx - x; - return val; -} - -struct data data_copy_escape_string(const char *s, int len) -{ - int i = 0; - struct data d; - char *q; - - d = data_grow_for(empty_data, strlen(s)+1); - - q = d.val; - while (i < len) { - char c = s[i++]; - - if (c != '\\') { - q[d.len++] = c; - continue; - } - - c = s[i++]; - assert(c); - switch (c) { - case 'a': - q[d.len++] = '\a'; - break; - case 'b': - q[d.len++] = '\b'; - break; - case 't': - q[d.len++] = '\t'; - break; - case 'n': - q[d.len++] = '\n'; - break; - case 'v': - q[d.len++] = '\v'; - break; - case 'f': - q[d.len++] = '\f'; - break; - case 'r': - q[d.len++] = '\r'; - break; - case '0': - case '1': - case '2': - case '3': - case '4': - case '5': - case '6': - case '7': - i--; /* need to re-read the first digit as - * part of the octal value */ - q[d.len++] = get_oct_char(s, &i); - break; - case 'x': - q[d.len++] = get_hex_char(s, &i); - break; - default: - q[d.len++] = c; - } - } - - q[d.len++] = '\0'; - return d; -} - -struct data data_copy_file(FILE *f, size_t maxlen) -{ - struct data d = empty_data; - - while (!feof(f) && (d.len < maxlen)) { - size_t chunksize, ret; - - if (maxlen == -1) - chunksize = 4096; - else - chunksize = maxlen - d.len; - - d = data_grow_for(d, chunksize); - ret = fread(d.val + d.len, 1, chunksize, f); - - if (ferror(f)) - die("Error reading file into data: %s", strerror(errno)); - - if (d.len + ret < d.len) - die("Overflow reading file into data\n"); - - d.len += ret; - } - - return d; -} - -struct data data_append_data(struct data d, const void *p, int len) -{ - d = data_grow_for(d, len); - memcpy(d.val + d.len, p, len); - d.len += len; - return d; -} - -struct data data_insert_at_marker(struct data d, struct marker *m, - const void *p, int len) -{ - d = data_grow_for(d, len); - memmove(d.val + m->offset + len, d.val + m->offset, d.len - m->offset); - memcpy(d.val + m->offset, p, len); - d.len += len; - - /* Adjust all markers after the one we're inserting at */ - m = m->next; - for_each_marker(m) - m->offset += len; - return d; -} - -struct data data_append_markers(struct data d, struct marker *m) -{ - struct marker **mp = &d.markers; - - /* Find the end of the markerlist */ - while (*mp) - mp = &((*mp)->next); - *mp = m; - return d; -} - -struct data data_merge(struct data d1, struct data d2) -{ - struct data d; - struct marker *m2 = d2.markers; - - d = data_append_markers(data_append_data(d1, d2.val, d2.len), m2); - - /* Adjust for the length of d1 */ - for_each_marker(m2) - m2->offset += d1.len; - - d2.markers = NULL; /* So data_free() doesn't clobber them */ - data_free(d2); - - return d; -} - -struct data data_append_cell(struct data d, cell_t word) -{ - cell_t beword = cpu_to_fdt32(word); - - return data_append_data(d, &beword, sizeof(beword)); -} - -struct data data_append_re(struct data d, const struct fdt_reserve_entry *re) -{ - struct fdt_reserve_entry bere; - - bere.address = cpu_to_fdt64(re->address); - bere.size = cpu_to_fdt64(re->size); - - return data_append_data(d, &bere, sizeof(bere)); -} - -struct data data_append_addr(struct data d, uint64_t addr) -{ - uint64_t beaddr = cpu_to_fdt64(addr); - - return data_append_data(d, &beaddr, sizeof(beaddr)); -} - -struct data data_append_byte(struct data d, uint8_t byte) -{ - return data_append_data(d, &byte, 1); -} - -struct data data_append_zeroes(struct data d, int len) -{ - d = data_grow_for(d, len); - - memset(d.val + d.len, 0, len); - d.len += len; - return d; -} - -struct data data_append_align(struct data d, int align) -{ - int newlen = ALIGN(d.len, align); - return data_append_zeroes(d, newlen - d.len); -} - -struct data data_add_marker(struct data d, enum markertype type, char *ref) -{ - struct marker *m; - - m = xmalloc(sizeof(*m)); - m->offset = d.len; - m->type = type; - m->ref = ref; - m->next = NULL; - - return data_append_markers(d, m); -} - -int data_is_one_string(struct data d) -{ - int i; - int len = d.len; - - if (len == 0) - return 0; - - for (i = 0; i < len-1; i++) - if (d.val[i] == '\0') - return 0; - - if (d.val[len-1] != '\0') - return 0; - - return 1; -} diff --git a/arch/powerpc/boot/dtc-src/dtc-lexer.l b/arch/powerpc/boot/dtc-src/dtc-lexer.l deleted file mode 100644 index 44dbfd3f0976..000000000000 --- a/arch/powerpc/boot/dtc-src/dtc-lexer.l +++ /dev/null @@ -1,320 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -%option noyywrap nounput yylineno - -%x INCLUDE -%x BYTESTRING -%x PROPNODENAME -%s V1 - -PROPNODECHAR [a-zA-Z0-9,._+*#?@-] -PATHCHAR ({PROPNODECHAR}|[/]) -LABEL [a-zA-Z_][a-zA-Z0-9_]* -STRING \"([^\\"]|\\.)*\" -WS [[:space:]] -COMMENT "/*"([^*]|\*+[^*/])*\*+"/" -LINECOMMENT "//".*\n - -%{ -#include "dtc.h" -#include "srcpos.h" -#include "dtc-parser.tab.h" - - -/*#define LEXDEBUG 1*/ - -#ifdef LEXDEBUG -#define DPRINT(fmt, ...) fprintf(stderr, fmt, ##__VA_ARGS__) -#else -#define DPRINT(fmt, ...) do { } while (0) -#endif - -static int dts_version; /* = 0 */ - -#define BEGIN_DEFAULT() if (dts_version == 0) { \ - DPRINT("\n"); \ - BEGIN(INITIAL); \ - } else { \ - DPRINT("\n"); \ - BEGIN(V1); \ - } - -static void push_input_file(const char *filename); -static int pop_input_file(void); -%} - -%% -<*>"/include/"{WS}*{STRING} { - char *name = strchr(yytext, '\"') + 1; - yytext[yyleng-1] = '\0'; - push_input_file(name); - } - -<*><> { - if (!pop_input_file()) { - yyterminate(); - } - } - -<*>{STRING} { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("String: %s\n", yytext); - yylval.data = data_copy_escape_string(yytext+1, - yyleng-2); - yylloc.first_line = yylineno; - return DT_STRING; - } - -<*>"/dts-v1/" { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Keyword: /dts-v1/\n"); - dts_version = 1; - BEGIN_DEFAULT(); - return DT_V1; - } - -<*>"/memreserve/" { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Keyword: /memreserve/\n"); - BEGIN_DEFAULT(); - return DT_MEMRESERVE; - } - -<*>{LABEL}: { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Label: %s\n", yytext); - yylval.labelref = strdup(yytext); - yylval.labelref[yyleng-1] = '\0'; - return DT_LABEL; - } - -[bodh]# { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - if (*yytext == 'b') - yylval.cbase = 2; - else if (*yytext == 'o') - yylval.cbase = 8; - else if (*yytext == 'd') - yylval.cbase = 10; - else - yylval.cbase = 16; - DPRINT("Base: %d\n", yylval.cbase); - return DT_BASE; - } - -[0-9a-fA-F]+ { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yylval.literal = strdup(yytext); - DPRINT("Literal: '%s'\n", yylval.literal); - return DT_LEGACYLITERAL; - } - -[0-9]+|0[xX][0-9a-fA-F]+ { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yylval.literal = strdup(yytext); - DPRINT("Literal: '%s'\n", yylval.literal); - return DT_LITERAL; - } - -\&{LABEL} { /* label reference */ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Ref: %s\n", yytext+1); - yylval.labelref = strdup(yytext+1); - return DT_REF; - } - -"&{/"{PATHCHAR}+\} { /* new-style path reference */ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yytext[yyleng-1] = '\0'; - DPRINT("Ref: %s\n", yytext+2); - yylval.labelref = strdup(yytext+2); - return DT_REF; - } - -"&/"{PATHCHAR}+ { /* old-style path reference */ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Ref: %s\n", yytext+1); - yylval.labelref = strdup(yytext+1); - return DT_REF; - } - -[0-9a-fA-F]{2} { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yylval.byte = strtol(yytext, NULL, 16); - DPRINT("Byte: %02x\n", (int)yylval.byte); - return DT_BYTE; - } - -"]" { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("/BYTESTRING\n"); - BEGIN_DEFAULT(); - return ']'; - } - -{PROPNODECHAR}+ { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("PropNodeName: %s\n", yytext); - yylval.propnodename = strdup(yytext); - BEGIN_DEFAULT(); - return DT_PROPNODENAME; - } - -"/incbin/" { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Binary Include\n"); - return DT_INCBIN; - } - -<*>{WS}+ /* eat whitespace */ -<*>{COMMENT}+ /* eat C-style comments */ -<*>{LINECOMMENT}+ /* eat C++-style comments */ - -<*>. { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Char: %c (\\x%02x)\n", yytext[0], - (unsigned)yytext[0]); - if (yytext[0] == '[') { - DPRINT("\n"); - BEGIN(BYTESTRING); - } - if ((yytext[0] == '{') - || (yytext[0] == ';')) { - DPRINT("\n"); - BEGIN(PROPNODENAME); - } - return yytext[0]; - } - -%% - - -/* - * Stack of nested include file contexts. - */ - -struct incl_file { - struct dtc_file *file; - YY_BUFFER_STATE yy_prev_buf; - int yy_prev_lineno; - struct incl_file *prev; -}; - -static struct incl_file *incl_file_stack; - - -/* - * Detect infinite include recursion. - */ -#define MAX_INCLUDE_DEPTH (100) - -static int incl_depth = 0; - - -static void push_input_file(const char *filename) -{ - struct incl_file *incl_file; - struct dtc_file *newfile; - struct search_path search, *searchptr = NULL; - - assert(filename); - - if (incl_depth++ >= MAX_INCLUDE_DEPTH) - die("Includes nested too deeply"); - - if (srcpos_file) { - search.dir = srcpos_file->dir; - search.next = NULL; - search.prev = NULL; - searchptr = &search; - } - - newfile = dtc_open_file(filename, searchptr); - - incl_file = xmalloc(sizeof(struct incl_file)); - - /* - * Save current context. - */ - incl_file->yy_prev_buf = YY_CURRENT_BUFFER; - incl_file->yy_prev_lineno = yylineno; - incl_file->file = srcpos_file; - incl_file->prev = incl_file_stack; - - incl_file_stack = incl_file; - - /* - * Establish new context. - */ - srcpos_file = newfile; - yylineno = 1; - yyin = newfile->file; - yy_switch_to_buffer(yy_create_buffer(yyin, YY_BUF_SIZE)); -} - - -static int pop_input_file(void) -{ - struct incl_file *incl_file; - - if (incl_file_stack == 0) - return 0; - - dtc_close_file(srcpos_file); - - /* - * Pop. - */ - --incl_depth; - incl_file = incl_file_stack; - incl_file_stack = incl_file->prev; - - /* - * Recover old context. - */ - yy_delete_buffer(YY_CURRENT_BUFFER); - yy_switch_to_buffer(incl_file->yy_prev_buf); - yylineno = incl_file->yy_prev_lineno; - srcpos_file = incl_file->file; - yyin = incl_file->file ? incl_file->file->file : NULL; - - /* - * Free old state. - */ - free(incl_file); - - return 1; -} diff --git a/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped b/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped deleted file mode 100644 index ac392cb040f6..000000000000 --- a/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped +++ /dev/null @@ -1,2187 +0,0 @@ -#line 2 "dtc-lexer.lex.c" - -#line 4 "dtc-lexer.lex.c" - -#define YY_INT_ALIGNED short int - -/* A lexical scanner generated by flex */ - -#define FLEX_SCANNER -#define YY_FLEX_MAJOR_VERSION 2 -#define YY_FLEX_MINOR_VERSION 5 -#define YY_FLEX_SUBMINOR_VERSION 34 -#if YY_FLEX_SUBMINOR_VERSION > 0 -#define FLEX_BETA -#endif - -/* First, we deal with platform-specific or compiler-specific issues. */ - -/* begin standard C headers. */ -#include -#include -#include -#include - -/* end standard C headers. */ - -/* flex integer type definitions */ - -#ifndef FLEXINT_H -#define FLEXINT_H - -/* C99 systems have . Non-C99 systems may or may not. */ - -#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L - -/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, - * if you want the limit (max/min) macros for int types. - */ -#ifndef __STDC_LIMIT_MACROS -#define __STDC_LIMIT_MACROS 1 -#endif - -#include -typedef int8_t flex_int8_t; -typedef uint8_t flex_uint8_t; -typedef int16_t flex_int16_t; -typedef uint16_t flex_uint16_t; -typedef int32_t flex_int32_t; -typedef uint32_t flex_uint32_t; -#else -typedef signed char flex_int8_t; -typedef short int flex_int16_t; -typedef int flex_int32_t; -typedef unsigned char flex_uint8_t; -typedef unsigned short int flex_uint16_t; -typedef unsigned int flex_uint32_t; -#endif /* ! C99 */ - -/* Limits of integral types. */ -#ifndef INT8_MIN -#define INT8_MIN (-128) -#endif -#ifndef INT16_MIN -#define INT16_MIN (-32767-1) -#endif -#ifndef INT32_MIN -#define INT32_MIN (-2147483647-1) -#endif -#ifndef INT8_MAX -#define INT8_MAX (127) -#endif -#ifndef INT16_MAX -#define INT16_MAX (32767) -#endif -#ifndef INT32_MAX -#define INT32_MAX (2147483647) -#endif -#ifndef UINT8_MAX -#define UINT8_MAX (255U) -#endif -#ifndef UINT16_MAX -#define UINT16_MAX (65535U) -#endif -#ifndef UINT32_MAX -#define UINT32_MAX (4294967295U) -#endif - -#endif /* ! FLEXINT_H */ - -#ifdef __cplusplus - -/* The "const" storage-class-modifier is valid. */ -#define YY_USE_CONST - -#else /* ! __cplusplus */ - -/* C99 requires __STDC__ to be defined as 1. */ -#if defined (__STDC__) - -#define YY_USE_CONST - -#endif /* defined (__STDC__) */ -#endif /* ! __cplusplus */ - -#ifdef YY_USE_CONST -#define yyconst const -#else -#define yyconst -#endif - -/* Returned upon end-of-file. */ -#define YY_NULL 0 - -/* Promotes a possibly negative, possibly signed char to an unsigned - * integer for use as an array index. If the signed char is negative, - * we want to instead treat it as an 8-bit unsigned char, hence the - * double cast. - */ -#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c) - -/* Enter a start condition. This macro really ought to take a parameter, - * but we do it the disgusting crufty way forced on us by the ()-less - * definition of BEGIN. - */ -#define BEGIN (yy_start) = 1 + 2 * - -/* Translate the current start state into a value that can be later handed - * to BEGIN to return to the state. The YYSTATE alias is for lex - * compatibility. - */ -#define YY_START (((yy_start) - 1) / 2) -#define YYSTATE YY_START - -/* Action number for EOF rule of a given start state. */ -#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) - -/* Special action meaning "start processing a new file". */ -#define YY_NEW_FILE yyrestart(yyin ) - -#define YY_END_OF_BUFFER_CHAR 0 - -/* Size of default input buffer. */ -#ifndef YY_BUF_SIZE -#define YY_BUF_SIZE 16384 -#endif - -/* The state buf must be large enough to hold one state per character in the main buffer. - */ -#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) - -#ifndef YY_TYPEDEF_YY_BUFFER_STATE -#define YY_TYPEDEF_YY_BUFFER_STATE -typedef struct yy_buffer_state *YY_BUFFER_STATE; -#endif - -extern int yyleng; - -extern FILE *yyin, *yyout; - -#define EOB_ACT_CONTINUE_SCAN 0 -#define EOB_ACT_END_OF_FILE 1 -#define EOB_ACT_LAST_MATCH 2 - - /* Note: We specifically omit the test for yy_rule_can_match_eol because it requires - * access to the local variable yy_act. Since yyless() is a macro, it would break - * existing scanners that call yyless() from OUTSIDE yylex. - * One obvious solution it to make yy_act a global. I tried that, and saw - * a 5% performance hit in a non-yylineno scanner, because yy_act is - * normally declared as a register variable-- so it is not worth it. - */ - #define YY_LESS_LINENO(n) \ - do { \ - int yyl;\ - for ( yyl = n; yyl < yyleng; ++yyl )\ - if ( yytext[yyl] == '\n' )\ - --yylineno;\ - }while(0) - -/* Return all but the first "n" matched characters back to the input stream. */ -#define yyless(n) \ - do \ - { \ - /* Undo effects of setting up yytext. */ \ - int yyless_macro_arg = (n); \ - YY_LESS_LINENO(yyless_macro_arg);\ - *yy_cp = (yy_hold_char); \ - YY_RESTORE_YY_MORE_OFFSET \ - (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ - YY_DO_BEFORE_ACTION; /* set up yytext again */ \ - } \ - while ( 0 ) - -#define unput(c) yyunput( c, (yytext_ptr) ) - -/* The following is because we cannot portably get our hands on size_t - * (without autoconf's help, which isn't available because we want - * flex-generated scanners to compile on their own). - * Given that the standard has decreed that size_t exists since 1989, - * I guess we can afford to depend on it. Manoj. - */ - -#ifndef YY_TYPEDEF_YY_SIZE_T -#define YY_TYPEDEF_YY_SIZE_T -typedef size_t yy_size_t; -#endif - -#ifndef YY_STRUCT_YY_BUFFER_STATE -#define YY_STRUCT_YY_BUFFER_STATE -struct yy_buffer_state - { - FILE *yy_input_file; - - char *yy_ch_buf; /* input buffer */ - char *yy_buf_pos; /* current position in input buffer */ - - /* Size of input buffer in bytes, not including room for EOB - * characters. - */ - yy_size_t yy_buf_size; - - /* Number of characters read into yy_ch_buf, not including EOB - * characters. - */ - int yy_n_chars; - - /* Whether we "own" the buffer - i.e., we know we created it, - * and can realloc() it to grow it, and should free() it to - * delete it. - */ - int yy_is_our_buffer; - - /* Whether this is an "interactive" input source; if so, and - * if we're using stdio for input, then we want to use getc() - * instead of fread(), to make sure we stop fetching input after - * each newline. - */ - int yy_is_interactive; - - /* Whether we're considered to be at the beginning of a line. - * If so, '^' rules will be active on the next match, otherwise - * not. - */ - int yy_at_bol; - - int yy_bs_lineno; /**< The line count. */ - int yy_bs_column; /**< The column count. */ - - /* Whether to try to fill the input buffer when we reach the - * end of it. - */ - int yy_fill_buffer; - - int yy_buffer_status; - -#define YY_BUFFER_NEW 0 -#define YY_BUFFER_NORMAL 1 - /* When an EOF's been seen but there's still some text to process - * then we mark the buffer as YY_EOF_PENDING, to indicate that we - * shouldn't try reading from the input source any more. We might - * still have a bunch of tokens to match, though, because of - * possible backing-up. - * - * When we actually see the EOF, we change the status to "new" - * (via yyrestart()), so that the user can continue scanning by - * just pointing yyin at a new input file. - */ -#define YY_BUFFER_EOF_PENDING 2 - - }; -#endif /* !YY_STRUCT_YY_BUFFER_STATE */ - -/* Stack of input buffers. */ -static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ -static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ -static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */ - -/* We provide macros for accessing buffer states in case in the - * future we want to put the buffer states in a more general - * "scanner state". - * - * Returns the top of the stack, or NULL. - */ -#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ - ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ - : NULL) - -/* Same as previous macro, but useful when we know that the buffer stack is not - * NULL or when we need an lvalue. For internal use only. - */ -#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] - -/* yy_hold_char holds the character lost when yytext is formed. */ -static char yy_hold_char; -static int yy_n_chars; /* number of characters read into yy_ch_buf */ -int yyleng; - -/* Points to current character in buffer. */ -static char *yy_c_buf_p = (char *) 0; -static int yy_init = 0; /* whether we need to initialize */ -static int yy_start = 0; /* start state number */ - -/* Flag which is used to allow yywrap()'s to do buffer switches - * instead of setting up a fresh yyin. A bit of a hack ... - */ -static int yy_did_buffer_switch_on_eof; - -void yyrestart (FILE *input_file ); -void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ); -YY_BUFFER_STATE yy_create_buffer (FILE *file,int size ); -void yy_delete_buffer (YY_BUFFER_STATE b ); -void yy_flush_buffer (YY_BUFFER_STATE b ); -void yypush_buffer_state (YY_BUFFER_STATE new_buffer ); -void yypop_buffer_state (void ); - -static void yyensure_buffer_stack (void ); -static void yy_load_buffer_state (void ); -static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file ); - -#define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER ) - -YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size ); -YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str ); -YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len ); - -void *yyalloc (yy_size_t ); -void *yyrealloc (void *,yy_size_t ); -void yyfree (void * ); - -#define yy_new_buffer yy_create_buffer - -#define yy_set_interactive(is_interactive) \ - { \ - if ( ! YY_CURRENT_BUFFER ){ \ - yyensure_buffer_stack (); \ - YY_CURRENT_BUFFER_LVALUE = \ - yy_create_buffer(yyin,YY_BUF_SIZE ); \ - } \ - YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ - } - -#define yy_set_bol(at_bol) \ - { \ - if ( ! YY_CURRENT_BUFFER ){\ - yyensure_buffer_stack (); \ - YY_CURRENT_BUFFER_LVALUE = \ - yy_create_buffer(yyin,YY_BUF_SIZE ); \ - } \ - YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ - } - -#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) - -/* Begin user sect3 */ - -#define yywrap(n) 1 -#define YY_SKIP_YYWRAP - -typedef unsigned char YY_CHAR; - -FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0; - -typedef int yy_state_type; - -extern int yylineno; - -int yylineno = 1; - -extern char *yytext; -#define yytext_ptr yytext - -static yy_state_type yy_get_previous_state (void ); -static yy_state_type yy_try_NUL_trans (yy_state_type current_state ); -static int yy_get_next_buffer (void ); -static void yy_fatal_error (yyconst char msg[] ); - -/* Done after the current pattern has been matched and before the - * corresponding action - sets up yytext. - */ -#define YY_DO_BEFORE_ACTION \ - (yytext_ptr) = yy_bp; \ - yyleng = (size_t) (yy_cp - yy_bp); \ - (yy_hold_char) = *yy_cp; \ - *yy_cp = '\0'; \ - (yy_c_buf_p) = yy_cp; - -#define YY_NUM_RULES 20 -#define YY_END_OF_BUFFER 21 -/* This struct is not used in this scanner, - but its presence is necessary. */ -struct yy_trans_info - { - flex_int32_t yy_verify; - flex_int32_t yy_nxt; - }; -static yyconst flex_int16_t yy_accept[104] = - { 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 21, 19, 16, 16, 19, 19, 19, 7, 7, 19, - 7, 19, 19, 19, 19, 13, 14, 14, 19, 8, - 8, 16, 0, 2, 0, 0, 9, 0, 0, 0, - 0, 0, 0, 7, 7, 5, 0, 6, 0, 12, - 12, 14, 14, 8, 0, 11, 9, 0, 0, 0, - 0, 18, 0, 0, 0, 0, 8, 0, 17, 0, - 0, 0, 0, 0, 10, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 3, 15, - 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, - - 0, 4, 0 - } ; - -static yyconst flex_int32_t yy_ec[256] = - { 0, - 1, 1, 1, 1, 1, 1, 1, 1, 2, 3, - 2, 2, 2, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 2, 1, 4, 5, 1, 1, 6, 1, 1, - 1, 7, 8, 8, 9, 8, 10, 11, 12, 13, - 13, 13, 13, 13, 13, 13, 13, 14, 1, 1, - 1, 1, 8, 8, 15, 15, 15, 15, 15, 15, - 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, - 16, 16, 16, 16, 16, 16, 16, 17, 16, 16, - 1, 18, 19, 1, 16, 1, 15, 20, 21, 22, - - 23, 15, 16, 24, 25, 16, 16, 26, 27, 28, - 24, 16, 16, 29, 30, 31, 32, 33, 16, 17, - 16, 16, 34, 1, 35, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1 - } ; - -static yyconst flex_int32_t yy_meta[36] = - { 0, - 1, 1, 1, 1, 2, 1, 2, 2, 2, 3, - 4, 4, 4, 5, 6, 7, 7, 1, 1, 6, - 6, 6, 6, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 8, 1 - } ; - -static yyconst flex_int16_t yy_base[117] = - { 0, - 0, 0, 30, 0, 44, 0, 67, 0, 97, 105, - 302, 303, 35, 44, 40, 94, 112, 0, 129, 152, - 296, 295, 159, 0, 176, 303, 0, 116, 95, 165, - 49, 46, 102, 303, 296, 0, 0, 288, 290, 293, - 264, 266, 270, 0, 0, 303, 0, 303, 264, 303, - 0, 0, 195, 101, 0, 0, 0, 0, 284, 125, - 277, 265, 225, 230, 216, 218, 0, 202, 224, 221, - 217, 107, 196, 188, 303, 206, 179, 186, 178, 185, - 183, 162, 161, 150, 169, 160, 145, 125, 303, 303, - 137, 109, 190, 103, 203, 167, 108, 197, 303, 123, - - 29, 303, 303, 215, 221, 226, 229, 234, 240, 246, - 250, 257, 265, 270, 275, 282 - } ; - -static yyconst flex_int16_t yy_def[117] = - { 0, - 103, 1, 1, 3, 3, 5, 103, 7, 3, 3, - 103, 103, 103, 103, 104, 105, 103, 106, 103, 19, - 19, 20, 103, 107, 20, 103, 108, 109, 105, 103, - 103, 103, 104, 103, 104, 110, 111, 103, 112, 113, - 103, 103, 103, 106, 19, 103, 20, 103, 103, 103, - 20, 108, 109, 103, 114, 110, 111, 115, 112, 112, - 113, 103, 103, 103, 103, 103, 114, 115, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 116, 103, 116, 103, 116, - - 103, 103, 0, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103 - } ; - -static yyconst flex_int16_t yy_nxt[339] = - { 0, - 12, 13, 14, 15, 12, 16, 12, 12, 12, 17, - 18, 18, 18, 12, 19, 20, 20, 12, 12, 21, - 19, 21, 19, 22, 20, 20, 20, 20, 20, 20, - 20, 20, 20, 12, 12, 12, 32, 32, 102, 23, - 12, 12, 12, 34, 20, 32, 32, 32, 32, 20, - 20, 20, 20, 20, 24, 24, 24, 35, 25, 54, - 54, 54, 26, 25, 25, 25, 25, 12, 13, 14, - 15, 27, 12, 27, 27, 27, 23, 27, 27, 27, - 12, 28, 28, 28, 12, 12, 28, 28, 28, 28, - 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, - - 12, 12, 29, 36, 103, 34, 17, 30, 31, 31, - 29, 54, 54, 54, 17, 30, 31, 31, 39, 35, - 52, 40, 52, 52, 52, 103, 78, 38, 38, 46, - 101, 60, 79, 41, 69, 97, 42, 94, 43, 45, - 45, 45, 46, 45, 47, 47, 93, 92, 45, 45, - 45, 45, 47, 47, 47, 47, 47, 47, 47, 47, - 47, 47, 47, 47, 47, 39, 47, 91, 40, 90, - 99, 47, 47, 47, 47, 54, 54, 54, 89, 88, - 41, 55, 87, 49, 100, 43, 51, 51, 51, 86, - 51, 95, 95, 96, 85, 51, 51, 51, 51, 52, - - 99, 52, 52, 52, 95, 95, 96, 84, 46, 83, - 82, 81, 39, 79, 100, 33, 33, 33, 33, 33, - 33, 33, 33, 37, 80, 77, 37, 37, 37, 44, - 40, 44, 50, 76, 50, 52, 75, 52, 74, 52, - 52, 53, 73, 53, 53, 53, 53, 56, 56, 56, - 72, 56, 56, 57, 71, 57, 57, 59, 59, 59, - 59, 59, 59, 59, 59, 61, 61, 61, 61, 61, - 61, 61, 61, 67, 70, 67, 68, 68, 68, 62, - 68, 68, 98, 98, 98, 98, 98, 98, 98, 98, - 60, 66, 65, 64, 63, 62, 60, 58, 103, 48, - - 48, 103, 11, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103 - } ; - -static yyconst flex_int16_t yy_chk[339] = - { 0, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 3, 13, 13, 101, 3, - 3, 3, 3, 15, 3, 14, 14, 32, 32, 3, - 3, 3, 3, 3, 5, 5, 5, 15, 5, 31, - 31, 31, 5, 5, 5, 5, 5, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - - 7, 7, 9, 16, 29, 33, 9, 9, 9, 9, - 10, 54, 54, 54, 10, 10, 10, 10, 17, 33, - 28, 17, 28, 28, 28, 100, 72, 16, 29, 28, - 97, 60, 72, 17, 60, 94, 17, 92, 17, 19, - 19, 19, 19, 19, 19, 19, 91, 88, 19, 19, - 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, - 19, 19, 20, 20, 20, 23, 20, 87, 23, 86, - 96, 20, 20, 20, 20, 30, 30, 30, 85, 84, - 23, 30, 83, 23, 96, 23, 25, 25, 25, 82, - 25, 93, 93, 93, 81, 25, 25, 25, 25, 53, - - 98, 53, 53, 53, 95, 95, 95, 80, 53, 79, - 78, 77, 76, 74, 98, 104, 104, 104, 104, 104, - 104, 104, 104, 105, 73, 71, 105, 105, 105, 106, - 70, 106, 107, 69, 107, 108, 68, 108, 66, 108, - 108, 109, 65, 109, 109, 109, 109, 110, 110, 110, - 64, 110, 110, 111, 63, 111, 111, 112, 112, 112, - 112, 112, 112, 112, 112, 113, 113, 113, 113, 113, - 113, 113, 113, 114, 62, 114, 115, 115, 115, 61, - 115, 115, 116, 116, 116, 116, 116, 116, 116, 116, - 59, 49, 43, 42, 41, 40, 39, 38, 35, 22, - - 21, 11, 103, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103 - } ; - -/* Table of booleans, true if rule could match eol. */ -static yyconst flex_int32_t yy_rule_can_match_eol[21] = - { 0, -1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, - 0, }; - -static yy_state_type yy_last_accepting_state; -static char *yy_last_accepting_cpos; - -extern int yy_flex_debug; -int yy_flex_debug = 0; - -/* The intent behind this definition is that it'll catch - * any uses of REJECT which flex missed. - */ -#define REJECT reject_used_but_not_detected -#define yymore() yymore_used_but_not_detected -#define YY_MORE_ADJ 0 -#define YY_RESTORE_YY_MORE_OFFSET -char *yytext; -#line 1 "dtc-lexer.l" -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - - - - -#line 37 "dtc-lexer.l" -#include "dtc.h" -#include "srcpos.h" -#include "dtc-parser.tab.h" - - -/*#define LEXDEBUG 1*/ - -#ifdef LEXDEBUG -#define DPRINT(fmt, ...) fprintf(stderr, fmt, ##__VA_ARGS__) -#else -#define DPRINT(fmt, ...) do { } while (0) -#endif - -static int dts_version; /* = 0 */ - -#define BEGIN_DEFAULT() if (dts_version == 0) { \ - DPRINT("\n"); \ - BEGIN(INITIAL); \ - } else { \ - DPRINT("\n"); \ - BEGIN(V1); \ - } - -static void push_input_file(const char *filename); -static int pop_input_file(void); -#line 638 "dtc-lexer.lex.c" - -#define INITIAL 0 -#define INCLUDE 1 -#define BYTESTRING 2 -#define PROPNODENAME 3 -#define V1 4 - -#ifndef YY_NO_UNISTD_H -/* Special case for "unistd.h", since it is non-ANSI. We include it way - * down here because we want the user's section 1 to have been scanned first. - * The user has a chance to override it with an option. - */ -#include -#endif - -#ifndef YY_EXTRA_TYPE -#define YY_EXTRA_TYPE void * -#endif - -static int yy_init_globals (void ); - -/* Macros after this point can all be overridden by user definitions in - * section 1. - */ - -#ifndef YY_SKIP_YYWRAP -#ifdef __cplusplus -extern "C" int yywrap (void ); -#else -extern int yywrap (void ); -#endif -#endif - -#ifndef yytext_ptr -static void yy_flex_strncpy (char *,yyconst char *,int ); -#endif - -#ifdef YY_NEED_STRLEN -static int yy_flex_strlen (yyconst char * ); -#endif - -#ifndef YY_NO_INPUT - -#ifdef __cplusplus -static int yyinput (void ); -#else -static int input (void ); -#endif - -#endif - -/* Amount of stuff to slurp up with each read. */ -#ifndef YY_READ_BUF_SIZE -#define YY_READ_BUF_SIZE 8192 -#endif - -/* Copy whatever the last rule matched to the standard output. */ -#ifndef ECHO -/* This used to be an fputs(), but since the string might contain NUL's, - * we now use fwrite(). - */ -#define ECHO fwrite( yytext, yyleng, 1, yyout ) -#endif - -/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, - * is returned in "result". - */ -#ifndef YY_INPUT -#define YY_INPUT(buf,result,max_size) \ - if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ - { \ - int c = '*'; \ - int n; \ - for ( n = 0; n < max_size && \ - (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ - buf[n] = (char) c; \ - if ( c == '\n' ) \ - buf[n++] = (char) c; \ - if ( c == EOF && ferror( yyin ) ) \ - YY_FATAL_ERROR( "input in flex scanner failed" ); \ - result = n; \ - } \ - else \ - { \ - errno=0; \ - while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \ - { \ - if( errno != EINTR) \ - { \ - YY_FATAL_ERROR( "input in flex scanner failed" ); \ - break; \ - } \ - errno=0; \ - clearerr(yyin); \ - } \ - }\ -\ - -#endif - -/* No semi-colon after return; correct usage is to write "yyterminate();" - - * we don't want an extra ';' after the "return" because that will cause - * some compilers to complain about unreachable statements. - */ -#ifndef yyterminate -#define yyterminate() return YY_NULL -#endif - -/* Number of entries by which start-condition stack grows. */ -#ifndef YY_START_STACK_INCR -#define YY_START_STACK_INCR 25 -#endif - -/* Report a fatal error. */ -#ifndef YY_FATAL_ERROR -#define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) -#endif - -/* end tables serialization structures and prototypes */ - -/* Default declaration of generated scanner - a define so the user can - * easily add parameters. - */ -#ifndef YY_DECL -#define YY_DECL_IS_OURS 1 - -extern int yylex (void); - -#define YY_DECL int yylex (void) -#endif /* !YY_DECL */ - -/* Code executed at the beginning of each rule, after yytext and yyleng - * have been set up. - */ -#ifndef YY_USER_ACTION -#define YY_USER_ACTION -#endif - -/* Code executed at the end of each rule. */ -#ifndef YY_BREAK -#define YY_BREAK break; -#endif - -#define YY_RULE_SETUP \ - YY_USER_ACTION - -/** The main scanner function which does all the work. - */ -YY_DECL -{ - register yy_state_type yy_current_state; - register char *yy_cp, *yy_bp; - register int yy_act; - -#line 64 "dtc-lexer.l" - -#line 795 "dtc-lexer.lex.c" - - if ( !(yy_init) ) - { - (yy_init) = 1; - -#ifdef YY_USER_INIT - YY_USER_INIT; -#endif - - if ( ! (yy_start) ) - (yy_start) = 1; /* first start state */ - - if ( ! yyin ) - yyin = stdin; - - if ( ! yyout ) - yyout = stdout; - - if ( ! YY_CURRENT_BUFFER ) { - yyensure_buffer_stack (); - YY_CURRENT_BUFFER_LVALUE = - yy_create_buffer(yyin,YY_BUF_SIZE ); - } - - yy_load_buffer_state( ); - } - - while ( 1 ) /* loops until end-of-file is reached */ - { - yy_cp = (yy_c_buf_p); - - /* Support of yytext. */ - *yy_cp = (yy_hold_char); - - /* yy_bp points to the position in yy_ch_buf of the start of - * the current run. - */ - yy_bp = yy_cp; - - yy_current_state = (yy_start); -yy_match: - do - { - register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)]; - if ( yy_accept[yy_current_state] ) - { - (yy_last_accepting_state) = yy_current_state; - (yy_last_accepting_cpos) = yy_cp; - } - while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) - { - yy_current_state = (int) yy_def[yy_current_state]; - if ( yy_current_state >= 104 ) - yy_c = yy_meta[(unsigned int) yy_c]; - } - yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; - ++yy_cp; - } - while ( yy_base[yy_current_state] != 303 ); - -yy_find_action: - yy_act = yy_accept[yy_current_state]; - if ( yy_act == 0 ) - { /* have to back up */ - yy_cp = (yy_last_accepting_cpos); - yy_current_state = (yy_last_accepting_state); - yy_act = yy_accept[yy_current_state]; - } - - YY_DO_BEFORE_ACTION; - - if ( yy_act != YY_END_OF_BUFFER && yy_rule_can_match_eol[yy_act] ) - { - int yyl; - for ( yyl = 0; yyl < yyleng; ++yyl ) - if ( yytext[yyl] == '\n' ) - - yylineno++; -; - } - -do_action: /* This label is used only to access EOF actions. */ - - switch ( yy_act ) - { /* beginning of action switch */ - case 0: /* must back up */ - /* undo the effects of YY_DO_BEFORE_ACTION */ - *yy_cp = (yy_hold_char); - yy_cp = (yy_last_accepting_cpos); - yy_current_state = (yy_last_accepting_state); - goto yy_find_action; - -case 1: -/* rule 1 can match eol */ -YY_RULE_SETUP -#line 65 "dtc-lexer.l" -{ - char *name = strchr(yytext, '\"') + 1; - yytext[yyleng-1] = '\0'; - push_input_file(name); - } - YY_BREAK -case YY_STATE_EOF(INITIAL): -case YY_STATE_EOF(INCLUDE): -case YY_STATE_EOF(BYTESTRING): -case YY_STATE_EOF(PROPNODENAME): -case YY_STATE_EOF(V1): -#line 71 "dtc-lexer.l" -{ - if (!pop_input_file()) { - yyterminate(); - } - } - YY_BREAK -case 2: -/* rule 2 can match eol */ -YY_RULE_SETUP -#line 77 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("String: %s\n", yytext); - yylval.data = data_copy_escape_string(yytext+1, - yyleng-2); - yylloc.first_line = yylineno; - return DT_STRING; - } - YY_BREAK -case 3: -YY_RULE_SETUP -#line 87 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Keyword: /dts-v1/\n"); - dts_version = 1; - BEGIN_DEFAULT(); - return DT_V1; - } - YY_BREAK -case 4: -YY_RULE_SETUP -#line 96 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Keyword: /memreserve/\n"); - BEGIN_DEFAULT(); - return DT_MEMRESERVE; - } - YY_BREAK -case 5: -YY_RULE_SETUP -#line 104 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Label: %s\n", yytext); - yylval.labelref = strdup(yytext); - yylval.labelref[yyleng-1] = '\0'; - return DT_LABEL; - } - YY_BREAK -case 6: -YY_RULE_SETUP -#line 113 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - if (*yytext == 'b') - yylval.cbase = 2; - else if (*yytext == 'o') - yylval.cbase = 8; - else if (*yytext == 'd') - yylval.cbase = 10; - else - yylval.cbase = 16; - DPRINT("Base: %d\n", yylval.cbase); - return DT_BASE; - } - YY_BREAK -case 7: -YY_RULE_SETUP -#line 128 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yylval.literal = strdup(yytext); - DPRINT("Literal: '%s'\n", yylval.literal); - return DT_LEGACYLITERAL; - } - YY_BREAK -case 8: -YY_RULE_SETUP -#line 136 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yylval.literal = strdup(yytext); - DPRINT("Literal: '%s'\n", yylval.literal); - return DT_LITERAL; - } - YY_BREAK -case 9: -YY_RULE_SETUP -#line 144 "dtc-lexer.l" -{ /* label reference */ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Ref: %s\n", yytext+1); - yylval.labelref = strdup(yytext+1); - return DT_REF; - } - YY_BREAK -case 10: -YY_RULE_SETUP -#line 152 "dtc-lexer.l" -{ /* new-style path reference */ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yytext[yyleng-1] = '\0'; - DPRINT("Ref: %s\n", yytext+2); - yylval.labelref = strdup(yytext+2); - return DT_REF; - } - YY_BREAK -case 11: -YY_RULE_SETUP -#line 161 "dtc-lexer.l" -{ /* old-style path reference */ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Ref: %s\n", yytext+1); - yylval.labelref = strdup(yytext+1); - return DT_REF; - } - YY_BREAK -case 12: -YY_RULE_SETUP -#line 169 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yylval.byte = strtol(yytext, NULL, 16); - DPRINT("Byte: %02x\n", (int)yylval.byte); - return DT_BYTE; - } - YY_BREAK -case 13: -YY_RULE_SETUP -#line 177 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("/BYTESTRING\n"); - BEGIN_DEFAULT(); - return ']'; - } - YY_BREAK -case 14: -YY_RULE_SETUP -#line 185 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("PropNodeName: %s\n", yytext); - yylval.propnodename = strdup(yytext); - BEGIN_DEFAULT(); - return DT_PROPNODENAME; - } - YY_BREAK -case 15: -YY_RULE_SETUP -#line 194 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Binary Include\n"); - return DT_INCBIN; - } - YY_BREAK -case 16: -/* rule 16 can match eol */ -YY_RULE_SETUP -#line 201 "dtc-lexer.l" -/* eat whitespace */ - YY_BREAK -case 17: -/* rule 17 can match eol */ -YY_RULE_SETUP -#line 202 "dtc-lexer.l" -/* eat C-style comments */ - YY_BREAK -case 18: -/* rule 18 can match eol */ -YY_RULE_SETUP -#line 203 "dtc-lexer.l" -/* eat C++-style comments */ - YY_BREAK -case 19: -YY_RULE_SETUP -#line 205 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Char: %c (\\x%02x)\n", yytext[0], - (unsigned)yytext[0]); - if (yytext[0] == '[') { - DPRINT("\n"); - BEGIN(BYTESTRING); - } - if ((yytext[0] == '{') - || (yytext[0] == ';')) { - DPRINT("\n"); - BEGIN(PROPNODENAME); - } - return yytext[0]; - } - YY_BREAK -case 20: -YY_RULE_SETUP -#line 222 "dtc-lexer.l" -ECHO; - YY_BREAK -#line 1120 "dtc-lexer.lex.c" - - case YY_END_OF_BUFFER: - { - /* Amount of text matched not including the EOB char. */ - int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; - - /* Undo the effects of YY_DO_BEFORE_ACTION. */ - *yy_cp = (yy_hold_char); - YY_RESTORE_YY_MORE_OFFSET - - if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) - { - /* We're scanning a new file or input source. It's - * possible that this happened because the user - * just pointed yyin at a new source and called - * yylex(). If so, then we have to assure - * consistency between YY_CURRENT_BUFFER and our - * globals. Here is the right place to do so, because - * this is the first action (other than possibly a - * back-up) that will match for the new input source. - */ - (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; - YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; - YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; - } - - /* Note that here we test for yy_c_buf_p "<=" to the position - * of the first EOB in the buffer, since yy_c_buf_p will - * already have been incremented past the NUL character - * (since all states make transitions on EOB to the - * end-of-buffer state). Contrast this with the test - * in input(). - */ - if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) - { /* This was really a NUL. */ - yy_state_type yy_next_state; - - (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; - - yy_current_state = yy_get_previous_state( ); - - /* Okay, we're now positioned to make the NUL - * transition. We couldn't have - * yy_get_previous_state() go ahead and do it - * for us because it doesn't know how to deal - * with the possibility of jamming (and we don't - * want to build jamming into it because then it - * will run more slowly). - */ - - yy_next_state = yy_try_NUL_trans( yy_current_state ); - - yy_bp = (yytext_ptr) + YY_MORE_ADJ; - - if ( yy_next_state ) - { - /* Consume the NUL. */ - yy_cp = ++(yy_c_buf_p); - yy_current_state = yy_next_state; - goto yy_match; - } - - else - { - yy_cp = (yy_c_buf_p); - goto yy_find_action; - } - } - - else switch ( yy_get_next_buffer( ) ) - { - case EOB_ACT_END_OF_FILE: - { - (yy_did_buffer_switch_on_eof) = 0; - - if ( yywrap( ) ) - { - /* Note: because we've taken care in - * yy_get_next_buffer() to have set up - * yytext, we can now set up - * yy_c_buf_p so that if some total - * hoser (like flex itself) wants to - * call the scanner after we return the - * YY_NULL, it'll still work - another - * YY_NULL will get returned. - */ - (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; - - yy_act = YY_STATE_EOF(YY_START); - goto do_action; - } - - else - { - if ( ! (yy_did_buffer_switch_on_eof) ) - YY_NEW_FILE; - } - break; - } - - case EOB_ACT_CONTINUE_SCAN: - (yy_c_buf_p) = - (yytext_ptr) + yy_amount_of_matched_text; - - yy_current_state = yy_get_previous_state( ); - - yy_cp = (yy_c_buf_p); - yy_bp = (yytext_ptr) + YY_MORE_ADJ; - goto yy_match; - - case EOB_ACT_LAST_MATCH: - (yy_c_buf_p) = - &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; - - yy_current_state = yy_get_previous_state( ); - - yy_cp = (yy_c_buf_p); - yy_bp = (yytext_ptr) + YY_MORE_ADJ; - goto yy_find_action; - } - break; - } - - default: - YY_FATAL_ERROR( - "fatal flex scanner internal error--no action found" ); - } /* end of action switch */ - } /* end of scanning one token */ -} /* end of yylex */ - -/* yy_get_next_buffer - try to read in a new buffer - * - * Returns a code representing an action: - * EOB_ACT_LAST_MATCH - - * EOB_ACT_CONTINUE_SCAN - continue scanning from current position - * EOB_ACT_END_OF_FILE - end of file - */ -static int yy_get_next_buffer (void) -{ - register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; - register char *source = (yytext_ptr); - register int number_to_move, i; - int ret_val; - - if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) - YY_FATAL_ERROR( - "fatal flex scanner internal error--end of buffer missed" ); - - if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) - { /* Don't try to fill the buffer, so this is an EOF. */ - if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) - { - /* We matched a single character, the EOB, so - * treat this as a final EOF. - */ - return EOB_ACT_END_OF_FILE; - } - - else - { - /* We matched some text prior to the EOB, first - * process it. - */ - return EOB_ACT_LAST_MATCH; - } - } - - /* Try to read more data. */ - - /* First move last chars to start of buffer. */ - number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1; - - for ( i = 0; i < number_to_move; ++i ) - *(dest++) = *(source++); - - if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) - /* don't do the read, it's not guaranteed to return an EOF, - * just force an EOF - */ - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; - - else - { - int num_to_read = - YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; - - while ( num_to_read <= 0 ) - { /* Not enough room in the buffer - grow it. */ - - /* just a shorter name for the current buffer */ - YY_BUFFER_STATE b = YY_CURRENT_BUFFER; - - int yy_c_buf_p_offset = - (int) ((yy_c_buf_p) - b->yy_ch_buf); - - if ( b->yy_is_our_buffer ) - { - int new_size = b->yy_buf_size * 2; - - if ( new_size <= 0 ) - b->yy_buf_size += b->yy_buf_size / 8; - else - b->yy_buf_size *= 2; - - b->yy_ch_buf = (char *) - /* Include room in for 2 EOB chars. */ - yyrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 ); - } - else - /* Can't grow it, we don't own it. */ - b->yy_ch_buf = 0; - - if ( ! b->yy_ch_buf ) - YY_FATAL_ERROR( - "fatal error - scanner input buffer overflow" ); - - (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset]; - - num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size - - number_to_move - 1; - - } - - if ( num_to_read > YY_READ_BUF_SIZE ) - num_to_read = YY_READ_BUF_SIZE; - - /* Read in more data. */ - YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), - (yy_n_chars), (size_t) num_to_read ); - - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); - } - - if ( (yy_n_chars) == 0 ) - { - if ( number_to_move == YY_MORE_ADJ ) - { - ret_val = EOB_ACT_END_OF_FILE; - yyrestart(yyin ); - } - - else - { - ret_val = EOB_ACT_LAST_MATCH; - YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = - YY_BUFFER_EOF_PENDING; - } - } - - else - ret_val = EOB_ACT_CONTINUE_SCAN; - - if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { - /* Extend the array by 50%, plus the number we really need. */ - yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); - YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size ); - if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) - YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); - } - - (yy_n_chars) += number_to_move; - YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; - YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; - - (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; - - return ret_val; -} - -/* yy_get_previous_state - get the state just before the EOB char was reached */ - - static yy_state_type yy_get_previous_state (void) -{ - register yy_state_type yy_current_state; - register char *yy_cp; - - yy_current_state = (yy_start); - - for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) - { - register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); - if ( yy_accept[yy_current_state] ) - { - (yy_last_accepting_state) = yy_current_state; - (yy_last_accepting_cpos) = yy_cp; - } - while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) - { - yy_current_state = (int) yy_def[yy_current_state]; - if ( yy_current_state >= 104 ) - yy_c = yy_meta[(unsigned int) yy_c]; - } - yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; - } - - return yy_current_state; -} - -/* yy_try_NUL_trans - try to make a transition on the NUL character - * - * synopsis - * next_state = yy_try_NUL_trans( current_state ); - */ - static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) -{ - register int yy_is_jam; - register char *yy_cp = (yy_c_buf_p); - - register YY_CHAR yy_c = 1; - if ( yy_accept[yy_current_state] ) - { - (yy_last_accepting_state) = yy_current_state; - (yy_last_accepting_cpos) = yy_cp; - } - while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) - { - yy_current_state = (int) yy_def[yy_current_state]; - if ( yy_current_state >= 104 ) - yy_c = yy_meta[(unsigned int) yy_c]; - } - yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; - yy_is_jam = (yy_current_state == 103); - - return yy_is_jam ? 0 : yy_current_state; -} - -#ifndef YY_NO_INPUT -#ifdef __cplusplus - static int yyinput (void) -#else - static int input (void) -#endif - -{ - int c; - - *(yy_c_buf_p) = (yy_hold_char); - - if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) - { - /* yy_c_buf_p now points to the character we want to return. - * If this occurs *before* the EOB characters, then it's a - * valid NUL; if not, then we've hit the end of the buffer. - */ - if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) - /* This was really a NUL. */ - *(yy_c_buf_p) = '\0'; - - else - { /* need more input */ - int offset = (yy_c_buf_p) - (yytext_ptr); - ++(yy_c_buf_p); - - switch ( yy_get_next_buffer( ) ) - { - case EOB_ACT_LAST_MATCH: - /* This happens because yy_g_n_b() - * sees that we've accumulated a - * token and flags that we need to - * try matching the token before - * proceeding. But for input(), - * there's no matching to consider. - * So convert the EOB_ACT_LAST_MATCH - * to EOB_ACT_END_OF_FILE. - */ - - /* Reset buffer status. */ - yyrestart(yyin ); - - /*FALLTHROUGH*/ - - case EOB_ACT_END_OF_FILE: - { - if ( yywrap( ) ) - return EOF; - - if ( ! (yy_did_buffer_switch_on_eof) ) - YY_NEW_FILE; -#ifdef __cplusplus - return yyinput(); -#else - return input(); -#endif - } - - case EOB_ACT_CONTINUE_SCAN: - (yy_c_buf_p) = (yytext_ptr) + offset; - break; - } - } - } - - c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ - *(yy_c_buf_p) = '\0'; /* preserve yytext */ - (yy_hold_char) = *++(yy_c_buf_p); - - if ( c == '\n' ) - - yylineno++; -; - - return c; -} -#endif /* ifndef YY_NO_INPUT */ - -/** Immediately switch to a different input stream. - * @param input_file A readable stream. - * - * @note This function does not reset the start condition to @c INITIAL . - */ - void yyrestart (FILE * input_file ) -{ - - if ( ! YY_CURRENT_BUFFER ){ - yyensure_buffer_stack (); - YY_CURRENT_BUFFER_LVALUE = - yy_create_buffer(yyin,YY_BUF_SIZE ); - } - - yy_init_buffer(YY_CURRENT_BUFFER,input_file ); - yy_load_buffer_state( ); -} - -/** Switch to a different input buffer. - * @param new_buffer The new input buffer. - * - */ - void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) -{ - - /* TODO. We should be able to replace this entire function body - * with - * yypop_buffer_state(); - * yypush_buffer_state(new_buffer); - */ - yyensure_buffer_stack (); - if ( YY_CURRENT_BUFFER == new_buffer ) - return; - - if ( YY_CURRENT_BUFFER ) - { - /* Flush out information for old buffer. */ - *(yy_c_buf_p) = (yy_hold_char); - YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); - } - - YY_CURRENT_BUFFER_LVALUE = new_buffer; - yy_load_buffer_state( ); - - /* We don't actually know whether we did this switch during - * EOF (yywrap()) processing, but the only time this flag - * is looked at is after yywrap() is called, so it's safe - * to go ahead and always set it. - */ - (yy_did_buffer_switch_on_eof) = 1; -} - -static void yy_load_buffer_state (void) -{ - (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; - (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; - yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; - (yy_hold_char) = *(yy_c_buf_p); -} - -/** Allocate and initialize an input buffer state. - * @param file A readable stream. - * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. - * - * @return the allocated buffer state. - */ - YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) -{ - YY_BUFFER_STATE b; - - b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); - if ( ! b ) - YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); - - b->yy_buf_size = size; - - /* yy_ch_buf has to be 2 characters longer than the size given because - * we need to put in 2 end-of-buffer characters. - */ - b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 ); - if ( ! b->yy_ch_buf ) - YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); - - b->yy_is_our_buffer = 1; - - yy_init_buffer(b,file ); - - return b; -} - -/** Destroy the buffer. - * @param b a buffer created with yy_create_buffer() - * - */ - void yy_delete_buffer (YY_BUFFER_STATE b ) -{ - - if ( ! b ) - return; - - if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ - YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; - - if ( b->yy_is_our_buffer ) - yyfree((void *) b->yy_ch_buf ); - - yyfree((void *) b ); -} - -#ifndef __cplusplus -extern int isatty (int ); -#endif /* __cplusplus */ - -/* Initializes or reinitializes a buffer. - * This function is sometimes called more than once on the same buffer, - * such as during a yyrestart() or at EOF. - */ - static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) - -{ - int oerrno = errno; - - yy_flush_buffer(b ); - - b->yy_input_file = file; - b->yy_fill_buffer = 1; - - /* If b is the current buffer, then yy_init_buffer was _probably_ - * called from yyrestart() or through yy_get_next_buffer. - * In that case, we don't want to reset the lineno or column. - */ - if (b != YY_CURRENT_BUFFER){ - b->yy_bs_lineno = 1; - b->yy_bs_column = 0; - } - - b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; - - errno = oerrno; -} - -/** Discard all buffered characters. On the next scan, YY_INPUT will be called. - * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. - * - */ - void yy_flush_buffer (YY_BUFFER_STATE b ) -{ - if ( ! b ) - return; - - b->yy_n_chars = 0; - - /* We always need two end-of-buffer characters. The first causes - * a transition to the end-of-buffer state. The second causes - * a jam in that state. - */ - b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; - b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; - - b->yy_buf_pos = &b->yy_ch_buf[0]; - - b->yy_at_bol = 1; - b->yy_buffer_status = YY_BUFFER_NEW; - - if ( b == YY_CURRENT_BUFFER ) - yy_load_buffer_state( ); -} - -/** Pushes the new state onto the stack. The new state becomes - * the current state. This function will allocate the stack - * if necessary. - * @param new_buffer The new state. - * - */ -void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) -{ - if (new_buffer == NULL) - return; - - yyensure_buffer_stack(); - - /* This block is copied from yy_switch_to_buffer. */ - if ( YY_CURRENT_BUFFER ) - { - /* Flush out information for old buffer. */ - *(yy_c_buf_p) = (yy_hold_char); - YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); - } - - /* Only push if top exists. Otherwise, replace top. */ - if (YY_CURRENT_BUFFER) - (yy_buffer_stack_top)++; - YY_CURRENT_BUFFER_LVALUE = new_buffer; - - /* copied from yy_switch_to_buffer. */ - yy_load_buffer_state( ); - (yy_did_buffer_switch_on_eof) = 1; -} - -/** Removes and deletes the top of the stack, if present. - * The next element becomes the new top. - * - */ -void yypop_buffer_state (void) -{ - if (!YY_CURRENT_BUFFER) - return; - - yy_delete_buffer(YY_CURRENT_BUFFER ); - YY_CURRENT_BUFFER_LVALUE = NULL; - if ((yy_buffer_stack_top) > 0) - --(yy_buffer_stack_top); - - if (YY_CURRENT_BUFFER) { - yy_load_buffer_state( ); - (yy_did_buffer_switch_on_eof) = 1; - } -} - -/* Allocates the stack if it does not exist. - * Guarantees space for at least one push. - */ -static void yyensure_buffer_stack (void) -{ - int num_to_alloc; - - if (!(yy_buffer_stack)) { - - /* First allocation is just for 2 elements, since we don't know if this - * scanner will even need a stack. We use 2 instead of 1 to avoid an - * immediate realloc on the next call. - */ - num_to_alloc = 1; - (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc - (num_to_alloc * sizeof(struct yy_buffer_state*) - ); - if ( ! (yy_buffer_stack) ) - YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); - - memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); - - (yy_buffer_stack_max) = num_to_alloc; - (yy_buffer_stack_top) = 0; - return; - } - - if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ - - /* Increase the buffer to prepare for a possible push. */ - int grow_size = 8 /* arbitrary grow size */; - - num_to_alloc = (yy_buffer_stack_max) + grow_size; - (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc - ((yy_buffer_stack), - num_to_alloc * sizeof(struct yy_buffer_state*) - ); - if ( ! (yy_buffer_stack) ) - YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); - - /* zero only the new slots.*/ - memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); - (yy_buffer_stack_max) = num_to_alloc; - } -} - -/** Setup the input buffer state to scan directly from a user-specified character buffer. - * @param base the character buffer - * @param size the size in bytes of the character buffer - * - * @return the newly allocated buffer state object. - */ -YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) -{ - YY_BUFFER_STATE b; - - if ( size < 2 || - base[size-2] != YY_END_OF_BUFFER_CHAR || - base[size-1] != YY_END_OF_BUFFER_CHAR ) - /* They forgot to leave room for the EOB's. */ - return 0; - - b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); - if ( ! b ) - YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); - - b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */ - b->yy_buf_pos = b->yy_ch_buf = base; - b->yy_is_our_buffer = 0; - b->yy_input_file = 0; - b->yy_n_chars = b->yy_buf_size; - b->yy_is_interactive = 0; - b->yy_at_bol = 1; - b->yy_fill_buffer = 0; - b->yy_buffer_status = YY_BUFFER_NEW; - - yy_switch_to_buffer(b ); - - return b; -} - -/** Setup the input buffer state to scan a string. The next call to yylex() will - * scan from a @e copy of @a str. - * @param yystr a NUL-terminated string to scan - * - * @return the newly allocated buffer state object. - * @note If you want to scan bytes that may contain NUL values, then use - * yy_scan_bytes() instead. - */ -YY_BUFFER_STATE yy_scan_string (yyconst char * yystr ) -{ - - return yy_scan_bytes(yystr,strlen(yystr) ); -} - -/** Setup the input buffer state to scan the given bytes. The next call to yylex() will - * scan from a @e copy of @a bytes. - * @param bytes the byte buffer to scan - * @param len the number of bytes in the buffer pointed to by @a bytes. - * - * @return the newly allocated buffer state object. - */ -YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, int _yybytes_len ) -{ - YY_BUFFER_STATE b; - char *buf; - yy_size_t n; - int i; - - /* Get memory for full buffer, including space for trailing EOB's. */ - n = _yybytes_len + 2; - buf = (char *) yyalloc(n ); - if ( ! buf ) - YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); - - for ( i = 0; i < _yybytes_len; ++i ) - buf[i] = yybytes[i]; - - buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; - - b = yy_scan_buffer(buf,n ); - if ( ! b ) - YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); - - /* It's okay to grow etc. this buffer, and we should throw it - * away when we're done. - */ - b->yy_is_our_buffer = 1; - - return b; -} - -#ifndef YY_EXIT_FAILURE -#define YY_EXIT_FAILURE 2 -#endif - -static void yy_fatal_error (yyconst char* msg ) -{ - (void) fprintf( stderr, "%s\n", msg ); - exit( YY_EXIT_FAILURE ); -} - -/* Redefine yyless() so it works in section 3 code. */ - -#undef yyless -#define yyless(n) \ - do \ - { \ - /* Undo effects of setting up yytext. */ \ - int yyless_macro_arg = (n); \ - YY_LESS_LINENO(yyless_macro_arg);\ - yytext[yyleng] = (yy_hold_char); \ - (yy_c_buf_p) = yytext + yyless_macro_arg; \ - (yy_hold_char) = *(yy_c_buf_p); \ - *(yy_c_buf_p) = '\0'; \ - yyleng = yyless_macro_arg; \ - } \ - while ( 0 ) - -/* Accessor methods (get/set functions) to struct members. */ - -/** Get the current line number. - * - */ -int yyget_lineno (void) -{ - - return yylineno; -} - -/** Get the input stream. - * - */ -FILE *yyget_in (void) -{ - return yyin; -} - -/** Get the output stream. - * - */ -FILE *yyget_out (void) -{ - return yyout; -} - -/** Get the length of the current token. - * - */ -int yyget_leng (void) -{ - return yyleng; -} - -/** Get the current token. - * - */ - -char *yyget_text (void) -{ - return yytext; -} - -/** Set the current line number. - * @param line_number - * - */ -void yyset_lineno (int line_number ) -{ - - yylineno = line_number; -} - -/** Set the input stream. This does not discard the current - * input buffer. - * @param in_str A readable stream. - * - * @see yy_switch_to_buffer - */ -void yyset_in (FILE * in_str ) -{ - yyin = in_str ; -} - -void yyset_out (FILE * out_str ) -{ - yyout = out_str ; -} - -int yyget_debug (void) -{ - return yy_flex_debug; -} - -void yyset_debug (int bdebug ) -{ - yy_flex_debug = bdebug ; -} - -static int yy_init_globals (void) -{ - /* Initialization is the same as for the non-reentrant scanner. - * This function is called from yylex_destroy(), so don't allocate here. - */ - - /* We do not touch yylineno unless the option is enabled. */ - yylineno = 1; - - (yy_buffer_stack) = 0; - (yy_buffer_stack_top) = 0; - (yy_buffer_stack_max) = 0; - (yy_c_buf_p) = (char *) 0; - (yy_init) = 0; - (yy_start) = 0; - -/* Defined in main.c */ -#ifdef YY_STDINIT - yyin = stdin; - yyout = stdout; -#else - yyin = (FILE *) 0; - yyout = (FILE *) 0; -#endif - - /* For future reference: Set errno on error, since we are called by - * yylex_init() - */ - return 0; -} - -/* yylex_destroy is for both reentrant and non-reentrant scanners. */ -int yylex_destroy (void) -{ - - /* Pop the buffer stack, destroying each element. */ - while(YY_CURRENT_BUFFER){ - yy_delete_buffer(YY_CURRENT_BUFFER ); - YY_CURRENT_BUFFER_LVALUE = NULL; - yypop_buffer_state(); - } - - /* Destroy the stack itself. */ - yyfree((yy_buffer_stack) ); - (yy_buffer_stack) = NULL; - - /* Reset the globals. This is important in a non-reentrant scanner so the next time - * yylex() is called, initialization will occur. */ - yy_init_globals( ); - - return 0; -} - -/* - * Internal utility routines. - */ - -#ifndef yytext_ptr -static void yy_flex_strncpy (char* s1, yyconst char * s2, int n ) -{ - register int i; - for ( i = 0; i < n; ++i ) - s1[i] = s2[i]; -} -#endif - -#ifdef YY_NEED_STRLEN -static int yy_flex_strlen (yyconst char * s ) -{ - register int n; - for ( n = 0; s[n]; ++n ) - ; - - return n; -} -#endif - -void *yyalloc (yy_size_t size ) -{ - return (void *) malloc( size ); -} - -void *yyrealloc (void * ptr, yy_size_t size ) -{ - /* The cast to (char *) in the following accommodates both - * implementations that use char* generic pointers, and those - * that use void* generic pointers. It works with the latter - * because both ANSI C and C++ allow castless assignment from - * any pointer type to void*, and deal with argument conversions - * as though doing an assignment. - */ - return (void *) realloc( (char *) ptr, size ); -} - -void yyfree (void * ptr ) -{ - free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ -} - -#define YYTABLES_NAME "yytables" - -#line 222 "dtc-lexer.l" - - - - -/* - * Stack of nested include file contexts. - */ - -struct incl_file { - struct dtc_file *file; - YY_BUFFER_STATE yy_prev_buf; - int yy_prev_lineno; - struct incl_file *prev; -}; - -static struct incl_file *incl_file_stack; - - -/* - * Detect infinite include recursion. - */ -#define MAX_INCLUDE_DEPTH (100) - -static int incl_depth = 0; - - -static void push_input_file(const char *filename) -{ - struct incl_file *incl_file; - struct dtc_file *newfile; - struct search_path search, *searchptr = NULL; - - assert(filename); - - if (incl_depth++ >= MAX_INCLUDE_DEPTH) - die("Includes nested too deeply"); - - if (srcpos_file) { - search.dir = srcpos_file->dir; - search.next = NULL; - search.prev = NULL; - searchptr = &search; - } - - newfile = dtc_open_file(filename, searchptr); - - incl_file = xmalloc(sizeof(struct incl_file)); - - /* - * Save current context. - */ - incl_file->yy_prev_buf = YY_CURRENT_BUFFER; - incl_file->yy_prev_lineno = yylineno; - incl_file->file = srcpos_file; - incl_file->prev = incl_file_stack; - - incl_file_stack = incl_file; - - /* - * Establish new context. - */ - srcpos_file = newfile; - yylineno = 1; - yyin = newfile->file; - yy_switch_to_buffer(yy_create_buffer(yyin,YY_BUF_SIZE)); -} - - -static int pop_input_file(void) -{ - struct incl_file *incl_file; - - if (incl_file_stack == 0) - return 0; - - dtc_close_file(srcpos_file); - - /* - * Pop. - */ - --incl_depth; - incl_file = incl_file_stack; - incl_file_stack = incl_file->prev; - - /* - * Recover old context. - */ - yy_delete_buffer(YY_CURRENT_BUFFER); - yy_switch_to_buffer(incl_file->yy_prev_buf); - yylineno = incl_file->yy_prev_lineno; - srcpos_file = incl_file->file; - yyin = incl_file->file ? incl_file->file->file : NULL; - - /* - * Free old state. - */ - free(incl_file); - - return 1; -} - diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped b/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped deleted file mode 100644 index 27129377e5d2..000000000000 --- a/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped +++ /dev/null @@ -1,2040 +0,0 @@ -/* A Bison parser, made by GNU Bison 2.3. */ - -/* Skeleton implementation for Bison's Yacc-like parsers in C - - Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 - Free Software Foundation, Inc. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street, Fifth Floor, - Boston, MA 02110-1301, USA. */ - -/* As a special exception, you may create a larger work that contains - part or all of the Bison parser skeleton and distribute that work - under terms of your choice, so long as that work isn't itself a - parser generator using the skeleton or a modified version thereof - as a parser skeleton. Alternatively, if you modify or redistribute - the parser skeleton itself, you may (at your option) remove this - special exception, which will cause the skeleton and the resulting - Bison output files to be licensed under the GNU General Public - License without this special exception. - - This special exception was added by the Free Software Foundation in - version 2.2 of Bison. */ - -/* C LALR(1) parser skeleton written by Richard Stallman, by - simplifying the original so-called "semantic" parser. */ - -/* All symbols defined below should begin with yy or YY, to avoid - infringing on user name space. This should be done even for local - variables, as they might otherwise be expanded by user macros. - There are some unavoidable exceptions within include files to - define necessary library symbols; they are noted "INFRINGES ON - USER NAME SPACE" below. */ - -/* Identify Bison output. */ -#define YYBISON 1 - -/* Bison version. */ -#define YYBISON_VERSION "2.3" - -/* Skeleton name. */ -#define YYSKELETON_NAME "yacc.c" - -/* Pure parsers. */ -#define YYPURE 0 - -/* Using locations. */ -#define YYLSP_NEEDED 1 - - - -/* Tokens. */ -#ifndef YYTOKENTYPE -# define YYTOKENTYPE - /* Put the tokens into the symbol table, so that GDB and other debuggers - know about them. */ - enum yytokentype { - DT_V1 = 258, - DT_MEMRESERVE = 259, - DT_PROPNODENAME = 260, - DT_LITERAL = 261, - DT_LEGACYLITERAL = 262, - DT_BASE = 263, - DT_BYTE = 264, - DT_STRING = 265, - DT_LABEL = 266, - DT_REF = 267, - DT_INCBIN = 268 - }; -#endif -/* Tokens. */ -#define DT_V1 258 -#define DT_MEMRESERVE 259 -#define DT_PROPNODENAME 260 -#define DT_LITERAL 261 -#define DT_LEGACYLITERAL 262 -#define DT_BASE 263 -#define DT_BYTE 264 -#define DT_STRING 265 -#define DT_LABEL 266 -#define DT_REF 267 -#define DT_INCBIN 268 - - - - -/* Copy the first part of user declarations. */ -#line 23 "dtc-parser.y" - -#include - -#include "dtc.h" -#include "srcpos.h" - -extern int yylex(void); - -extern struct boot_info *the_boot_info; -extern int treesource_error; - -static unsigned long long eval_literal(const char *s, int base, int bits); - - -/* Enabling traces. */ -#ifndef YYDEBUG -# define YYDEBUG 0 -#endif - -/* Enabling verbose error messages. */ -#ifdef YYERROR_VERBOSE -# undef YYERROR_VERBOSE -# define YYERROR_VERBOSE 1 -#else -# define YYERROR_VERBOSE 0 -#endif - -/* Enabling the token table. */ -#ifndef YYTOKEN_TABLE -# define YYTOKEN_TABLE 0 -#endif - -#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED -typedef union YYSTYPE -#line 37 "dtc-parser.y" -{ - char *propnodename; - char *literal; - char *labelref; - unsigned int cbase; - uint8_t byte; - struct data data; - - uint64_t addr; - cell_t cell; - struct property *prop; - struct property *proplist; - struct node *node; - struct node *nodelist; - struct reserve_info *re; -} -/* Line 187 of yacc.c. */ -#line 153 "dtc-parser.tab.c" - YYSTYPE; -# define yystype YYSTYPE /* obsolescent; will be withdrawn */ -# define YYSTYPE_IS_DECLARED 1 -# define YYSTYPE_IS_TRIVIAL 1 -#endif - -#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED -typedef struct YYLTYPE -{ - int first_line; - int first_column; - int last_line; - int last_column; -} YYLTYPE; -# define yyltype YYLTYPE /* obsolescent; will be withdrawn */ -# define YYLTYPE_IS_DECLARED 1 -# define YYLTYPE_IS_TRIVIAL 1 -#endif - - -/* Copy the second part of user declarations. */ - - -/* Line 216 of yacc.c. */ -#line 178 "dtc-parser.tab.c" - -#ifdef short -# undef short -#endif - -#ifdef YYTYPE_UINT8 -typedef YYTYPE_UINT8 yytype_uint8; -#else -typedef unsigned char yytype_uint8; -#endif - -#ifdef YYTYPE_INT8 -typedef YYTYPE_INT8 yytype_int8; -#elif (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -typedef signed char yytype_int8; -#else -typedef short int yytype_int8; -#endif - -#ifdef YYTYPE_UINT16 -typedef YYTYPE_UINT16 yytype_uint16; -#else -typedef unsigned short int yytype_uint16; -#endif - -#ifdef YYTYPE_INT16 -typedef YYTYPE_INT16 yytype_int16; -#else -typedef short int yytype_int16; -#endif - -#ifndef YYSIZE_T -# ifdef __SIZE_TYPE__ -# define YYSIZE_T __SIZE_TYPE__ -# elif defined size_t -# define YYSIZE_T size_t -# elif ! defined YYSIZE_T && (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -# include /* INFRINGES ON USER NAME SPACE */ -# define YYSIZE_T size_t -# else -# define YYSIZE_T unsigned int -# endif -#endif - -#define YYSIZE_MAXIMUM ((YYSIZE_T) -1) - -#ifndef YY_ -# if YYENABLE_NLS -# if ENABLE_NLS -# include /* INFRINGES ON USER NAME SPACE */ -# define YY_(msgid) dgettext ("bison-runtime", msgid) -# endif -# endif -# ifndef YY_ -# define YY_(msgid) msgid -# endif -#endif - -/* Suppress unused-variable warnings by "using" E. */ -#if ! defined lint || defined __GNUC__ -# define YYUSE(e) ((void) (e)) -#else -# define YYUSE(e) /* empty */ -#endif - -/* Identity function, used to suppress warnings about constant conditions. */ -#ifndef lint -# define YYID(n) (n) -#else -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static int -YYID (int i) -#else -static int -YYID (i) - int i; -#endif -{ - return i; -} -#endif - -#if ! defined yyoverflow || YYERROR_VERBOSE - -/* The parser invokes alloca or malloc; define the necessary symbols. */ - -# ifdef YYSTACK_USE_ALLOCA -# if YYSTACK_USE_ALLOCA -# ifdef __GNUC__ -# define YYSTACK_ALLOC __builtin_alloca -# elif defined __BUILTIN_VA_ARG_INCR -# include /* INFRINGES ON USER NAME SPACE */ -# elif defined _AIX -# define YYSTACK_ALLOC __alloca -# elif defined _MSC_VER -# include /* INFRINGES ON USER NAME SPACE */ -# define alloca _alloca -# else -# define YYSTACK_ALLOC alloca -# if ! defined _ALLOCA_H && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -# include /* INFRINGES ON USER NAME SPACE */ -# ifndef _STDLIB_H -# define _STDLIB_H 1 -# endif -# endif -# endif -# endif -# endif - -# ifdef YYSTACK_ALLOC - /* Pacify GCC's `empty if-body' warning. */ -# define YYSTACK_FREE(Ptr) do { /* empty */; } while (YYID (0)) -# ifndef YYSTACK_ALLOC_MAXIMUM - /* The OS might guarantee only one guard page at the bottom of the stack, - and a page size can be as small as 4096 bytes. So we cannot safely - invoke alloca (N) if N exceeds 4096. Use a slightly smaller number - to allow for a few compiler-allocated temporary stack slots. */ -# define YYSTACK_ALLOC_MAXIMUM 4032 /* reasonable circa 2006 */ -# endif -# else -# define YYSTACK_ALLOC YYMALLOC -# define YYSTACK_FREE YYFREE -# ifndef YYSTACK_ALLOC_MAXIMUM -# define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM -# endif -# if (defined __cplusplus && ! defined _STDLIB_H \ - && ! ((defined YYMALLOC || defined malloc) \ - && (defined YYFREE || defined free))) -# include /* INFRINGES ON USER NAME SPACE */ -# ifndef _STDLIB_H -# define _STDLIB_H 1 -# endif -# endif -# ifndef YYMALLOC -# define YYMALLOC malloc -# if ! defined malloc && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */ -# endif -# endif -# ifndef YYFREE -# define YYFREE free -# if ! defined free && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -void free (void *); /* INFRINGES ON USER NAME SPACE */ -# endif -# endif -# endif -#endif /* ! defined yyoverflow || YYERROR_VERBOSE */ - - -#if (! defined yyoverflow \ - && (! defined __cplusplus \ - || (defined YYLTYPE_IS_TRIVIAL && YYLTYPE_IS_TRIVIAL \ - && defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL))) - -/* A type that is properly aligned for any stack member. */ -union yyalloc -{ - yytype_int16 yyss; - YYSTYPE yyvs; - YYLTYPE yyls; -}; - -/* The size of the maximum gap between one aligned stack and the next. */ -# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1) - -/* The size of an array large to enough to hold all stacks, each with - N elements. */ -# define YYSTACK_BYTES(N) \ - ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE) + sizeof (YYLTYPE)) \ - + 2 * YYSTACK_GAP_MAXIMUM) - -/* Copy COUNT objects from FROM to TO. The source and destination do - not overlap. */ -# ifndef YYCOPY -# if defined __GNUC__ && 1 < __GNUC__ -# define YYCOPY(To, From, Count) \ - __builtin_memcpy (To, From, (Count) * sizeof (*(From))) -# else -# define YYCOPY(To, From, Count) \ - do \ - { \ - YYSIZE_T yyi; \ - for (yyi = 0; yyi < (Count); yyi++) \ - (To)[yyi] = (From)[yyi]; \ - } \ - while (YYID (0)) -# endif -# endif - -/* Relocate STACK from its old location to the new one. The - local variables YYSIZE and YYSTACKSIZE give the old and new number of - elements in the stack, and YYPTR gives the new location of the - stack. Advance YYPTR to a properly aligned location for the next - stack. */ -# define YYSTACK_RELOCATE(Stack) \ - do \ - { \ - YYSIZE_T yynewbytes; \ - YYCOPY (&yyptr->Stack, Stack, yysize); \ - Stack = &yyptr->Stack; \ - yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \ - yyptr += yynewbytes / sizeof (*yyptr); \ - } \ - while (YYID (0)) - -#endif - -/* YYFINAL -- State number of the termination state. */ -#define YYFINAL 9 -/* YYLAST -- Last index in YYTABLE. */ -#define YYLAST 73 - -/* YYNTOKENS -- Number of terminals. */ -#define YYNTOKENS 27 -/* YYNNTS -- Number of nonterminals. */ -#define YYNNTS 20 -/* YYNRULES -- Number of rules. */ -#define YYNRULES 45 -/* YYNRULES -- Number of states. */ -#define YYNSTATES 76 - -/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */ -#define YYUNDEFTOK 2 -#define YYMAXUTOK 268 - -#define YYTRANSLATE(YYX) \ - ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK) - -/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */ -static const yytype_uint8 yytranslate[] = -{ - 0, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 24, 26, 2, 2, 25, 15, 2, 16, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 14, - 20, 19, 21, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 22, 2, 23, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 17, 2, 18, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 1, 2, 3, 4, - 5, 6, 7, 8, 9, 10, 11, 12, 13 -}; - -#if YYDEBUG -/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in - YYRHS. */ -static const yytype_uint8 yyprhs[] = -{ - 0, 0, 3, 8, 11, 12, 15, 21, 22, 25, - 27, 34, 36, 38, 41, 47, 48, 51, 57, 61, - 64, 69, 74, 77, 87, 93, 96, 97, 100, 103, - 104, 107, 110, 113, 114, 116, 118, 121, 122, 125, - 128, 129, 132, 135, 139, 140 -}; - -/* YYRHS -- A `-1'-separated list of the rules' RHS. */ -static const yytype_int8 yyrhs[] = -{ - 28, 0, -1, 3, 14, 29, 34, -1, 31, 34, - -1, -1, 30, 29, -1, 46, 4, 33, 33, 14, - -1, -1, 32, 31, -1, 30, -1, 46, 4, 33, - 15, 33, 14, -1, 6, -1, 7, -1, 16, 35, - -1, 17, 36, 44, 18, 14, -1, -1, 36, 37, - -1, 46, 5, 19, 38, 14, -1, 46, 5, 14, - -1, 39, 10, -1, 39, 20, 40, 21, -1, 39, - 22, 43, 23, -1, 39, 12, -1, 39, 13, 24, - 10, 25, 33, 25, 33, 26, -1, 39, 13, 24, - 10, 26, -1, 38, 11, -1, -1, 38, 25, -1, - 39, 11, -1, -1, 40, 42, -1, 40, 12, -1, - 40, 11, -1, -1, 8, -1, 6, -1, 41, 7, - -1, -1, 43, 9, -1, 43, 11, -1, -1, 45, - 44, -1, 45, 37, -1, 46, 5, 35, -1, -1, - 11, -1 -}; - -/* YYRLINE[YYN] -- source line where rule number YYN was defined. */ -static const yytype_uint16 yyrline[] = -{ - 0, 89, 89, 93, 101, 104, 111, 119, 122, 129, - 133, 140, 144, 151, 158, 166, 169, 176, 180, 187, - 191, 195, 199, 203, 220, 231, 239, 242, 246, 254, - 257, 261, 266, 274, 277, 281, 285, 293, 296, 300, - 308, 311, 315, 323, 331, 334 -}; -#endif - -#if YYDEBUG || YYERROR_VERBOSE || YYTOKEN_TABLE -/* YYTNAME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM. - First, the terminals, then, starting at YYNTOKENS, nonterminals. */ -static const char *const yytname[] = -{ - "$end", "error", "$undefined", "DT_V1", "DT_MEMRESERVE", - "DT_PROPNODENAME", "DT_LITERAL", "DT_LEGACYLITERAL", "DT_BASE", - "DT_BYTE", "DT_STRING", "DT_LABEL", "DT_REF", "DT_INCBIN", "';'", "'-'", - "'/'", "'{'", "'}'", "'='", "'<'", "'>'", "'['", "']'", "'('", "','", - "')'", "$accept", "sourcefile", "memreserves", "memreserve", - "v0_memreserves", "v0_memreserve", "addr", "devicetree", "nodedef", - "proplist", "propdef", "propdata", "propdataprefix", "celllist", - "cellbase", "cellval", "bytestring", "subnodes", "subnode", "label", 0 -}; -#endif - -# ifdef YYPRINT -/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to - token YYLEX-NUM. */ -static const yytype_uint16 yytoknum[] = -{ - 0, 256, 257, 258, 259, 260, 261, 262, 263, 264, - 265, 266, 267, 268, 59, 45, 47, 123, 125, 61, - 60, 62, 91, 93, 40, 44, 41 -}; -# endif - -/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */ -static const yytype_uint8 yyr1[] = -{ - 0, 27, 28, 28, 29, 29, 30, 31, 31, 32, - 32, 33, 33, 34, 35, 36, 36, 37, 37, 38, - 38, 38, 38, 38, 38, 38, 39, 39, 39, 40, - 40, 40, 40, 41, 41, 42, 42, 43, 43, 43, - 44, 44, 44, 45, 46, 46 -}; - -/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */ -static const yytype_uint8 yyr2[] = -{ - 0, 2, 4, 2, 0, 2, 5, 0, 2, 1, - 6, 1, 1, 2, 5, 0, 2, 5, 3, 2, - 4, 4, 2, 9, 5, 2, 0, 2, 2, 0, - 2, 2, 2, 0, 1, 1, 2, 0, 2, 2, - 0, 2, 2, 3, 0, 1 -}; - -/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state - STATE-NUM when YYTABLE doesn't specify something else to do. Zero - means the default is an error. */ -static const yytype_uint8 yydefact[] = -{ - 7, 0, 45, 0, 9, 0, 7, 0, 4, 1, - 0, 3, 8, 0, 0, 4, 0, 15, 13, 11, - 12, 0, 2, 5, 0, 40, 0, 0, 0, 16, - 0, 40, 0, 0, 6, 0, 42, 41, 0, 10, - 14, 18, 26, 43, 0, 0, 25, 17, 27, 19, - 28, 22, 0, 29, 37, 0, 33, 0, 0, 35, - 34, 32, 31, 20, 0, 30, 38, 39, 21, 0, - 24, 36, 0, 0, 0, 23 -}; - -/* YYDEFGOTO[NTERM-NUM]. */ -static const yytype_int8 yydefgoto[] = -{ - -1, 3, 14, 4, 5, 6, 27, 11, 18, 25, - 29, 44, 45, 56, 64, 65, 57, 30, 31, 7 -}; - -/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing - STATE-NUM. */ -#define YYPACT_NINF -14 -static const yytype_int8 yypact[] = -{ - 30, -11, -14, 7, -14, -1, 27, 13, 27, -14, - 8, -14, -14, 40, -1, 27, 35, -14, -14, -14, - -14, 21, -14, -14, 40, 24, 40, 28, 40, -14, - 32, 24, 46, 38, -14, 39, -14, -14, 26, -14, - -14, -14, -14, -14, -9, 10, -14, -14, -14, -14, - -14, -14, 31, -14, -14, 44, -2, 3, 23, -14, - -14, -14, -14, -14, 50, -14, -14, -14, -14, 40, - -14, -14, 33, 40, 36, -14 -}; - -/* YYPGOTO[NTERM-NUM]. */ -static const yytype_int8 yypgoto[] = -{ - -14, -14, 48, 29, 53, -14, -13, 47, 34, -14, - 37, -14, -14, -14, -14, -14, -14, 42, -14, -7 -}; - -/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If - positive, shift that token. If negative, reduce the rule which - number is the opposite. If zero, do what YYDEFACT says. - If YYTABLE_NINF, syntax error. */ -#define YYTABLE_NINF -45 -static const yytype_int8 yytable[] = -{ - 21, 16, 46, 8, 59, 47, 60, 9, 16, 61, - 62, 28, 66, 33, 67, 10, 48, 13, 32, 63, - 49, 50, 51, 52, 32, 17, 68, 19, 20, -44, - 53, -44, 54, 1, -44, 2, 26, 15, 2, 24, - 41, 2, 34, 17, 15, 42, 19, 20, 69, 70, - 35, 38, 39, 40, 58, 55, 72, 71, 73, 12, - 74, 22, 75, 23, 0, 0, 0, 0, 36, 0, - 0, 0, 43, 37 -}; - -static const yytype_int8 yycheck[] = -{ - 13, 8, 11, 14, 6, 14, 8, 0, 15, 11, - 12, 24, 9, 26, 11, 16, 25, 4, 25, 21, - 10, 11, 12, 13, 31, 17, 23, 6, 7, 5, - 20, 4, 22, 3, 4, 11, 15, 8, 11, 4, - 14, 11, 14, 17, 15, 19, 6, 7, 25, 26, - 18, 5, 14, 14, 10, 24, 69, 7, 25, 6, - 73, 14, 26, 15, -1, -1, -1, -1, 31, -1, - -1, -1, 38, 31 -}; - -/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing - symbol of state STATE-NUM. */ -static const yytype_uint8 yystos[] = -{ - 0, 3, 11, 28, 30, 31, 32, 46, 14, 0, - 16, 34, 31, 4, 29, 30, 46, 17, 35, 6, - 7, 33, 34, 29, 4, 36, 15, 33, 33, 37, - 44, 45, 46, 33, 14, 18, 37, 44, 5, 14, - 14, 14, 19, 35, 38, 39, 11, 14, 25, 10, - 11, 12, 13, 20, 22, 24, 40, 43, 10, 6, - 8, 11, 12, 21, 41, 42, 9, 11, 23, 25, - 26, 7, 33, 25, 33, 26 -}; - -#define yyerrok (yyerrstatus = 0) -#define yyclearin (yychar = YYEMPTY) -#define YYEMPTY (-2) -#define YYEOF 0 - -#define YYACCEPT goto yyacceptlab -#define YYABORT goto yyabortlab -#define YYERROR goto yyerrorlab - - -/* Like YYERROR except do call yyerror. This remains here temporarily - to ease the transition to the new meaning of YYERROR, for GCC. - Once GCC version 2 has supplanted version 1, this can go. */ - -#define YYFAIL goto yyerrlab - -#define YYRECOVERING() (!!yyerrstatus) - -#define YYBACKUP(Token, Value) \ -do \ - if (yychar == YYEMPTY && yylen == 1) \ - { \ - yychar = (Token); \ - yylval = (Value); \ - yytoken = YYTRANSLATE (yychar); \ - YYPOPSTACK (1); \ - goto yybackup; \ - } \ - else \ - { \ - yyerror (YY_("syntax error: cannot back up")); \ - YYERROR; \ - } \ -while (YYID (0)) - - -#define YYTERROR 1 -#define YYERRCODE 256 - - -/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N]. - If N is 0, then set CURRENT to the empty location which ends - the previous symbol: RHS[0] (always defined). */ - -#define YYRHSLOC(Rhs, K) ((Rhs)[K]) -#ifndef YYLLOC_DEFAULT -# define YYLLOC_DEFAULT(Current, Rhs, N) \ - do \ - if (YYID (N)) \ - { \ - (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \ - (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \ - (Current).last_line = YYRHSLOC (Rhs, N).last_line; \ - (Current).last_column = YYRHSLOC (Rhs, N).last_column; \ - } \ - else \ - { \ - (Current).first_line = (Current).last_line = \ - YYRHSLOC (Rhs, 0).last_line; \ - (Current).first_column = (Current).last_column = \ - YYRHSLOC (Rhs, 0).last_column; \ - } \ - while (YYID (0)) -#endif - - -/* YY_LOCATION_PRINT -- Print the location on the stream. - This macro was not mandated originally: define only if we know - we won't break user code: when these are the locations we know. */ - -#ifndef YY_LOCATION_PRINT -# if YYLTYPE_IS_TRIVIAL -# define YY_LOCATION_PRINT(File, Loc) \ - fprintf (File, "%d.%d-%d.%d", \ - (Loc).first_line, (Loc).first_column, \ - (Loc).last_line, (Loc).last_column) -# else -# define YY_LOCATION_PRINT(File, Loc) ((void) 0) -# endif -#endif - - -/* YYLEX -- calling `yylex' with the right arguments. */ - -#ifdef YYLEX_PARAM -# define YYLEX yylex (YYLEX_PARAM) -#else -# define YYLEX yylex () -#endif - -/* Enable debugging if requested. */ -#if YYDEBUG - -# ifndef YYFPRINTF -# include /* INFRINGES ON USER NAME SPACE */ -# define YYFPRINTF fprintf -# endif - -# define YYDPRINTF(Args) \ -do { \ - if (yydebug) \ - YYFPRINTF Args; \ -} while (YYID (0)) - -# define YY_SYMBOL_PRINT(Title, Type, Value, Location) \ -do { \ - if (yydebug) \ - { \ - YYFPRINTF (stderr, "%s ", Title); \ - yy_symbol_print (stderr, \ - Type, Value, Location); \ - YYFPRINTF (stderr, "\n"); \ - } \ -} while (YYID (0)) - - -/*--------------------------------. -| Print this symbol on YYOUTPUT. | -`--------------------------------*/ - -/*ARGSUSED*/ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static void -yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp) -#else -static void -yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp) - FILE *yyoutput; - int yytype; - YYSTYPE const * const yyvaluep; - YYLTYPE const * const yylocationp; -#endif -{ - if (!yyvaluep) - return; - YYUSE (yylocationp); -# ifdef YYPRINT - if (yytype < YYNTOKENS) - YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep); -# else - YYUSE (yyoutput); -# endif - switch (yytype) - { - default: - break; - } -} - - -/*--------------------------------. -| Print this symbol on YYOUTPUT. | -`--------------------------------*/ - -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static void -yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp) -#else -static void -yy_symbol_print (yyoutput, yytype, yyvaluep, yylocationp) - FILE *yyoutput; - int yytype; - YYSTYPE const * const yyvaluep; - YYLTYPE const * const yylocationp; -#endif -{ - if (yytype < YYNTOKENS) - YYFPRINTF (yyoutput, "token %s (", yytname[yytype]); - else - YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]); - - YY_LOCATION_PRINT (yyoutput, *yylocationp); - YYFPRINTF (yyoutput, ": "); - yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp); - YYFPRINTF (yyoutput, ")"); -} - -/*------------------------------------------------------------------. -| yy_stack_print -- Print the state stack from its BOTTOM up to its | -| TOP (included). | -`------------------------------------------------------------------*/ - -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static void -yy_stack_print (yytype_int16 *bottom, yytype_int16 *top) -#else -static void -yy_stack_print (bottom, top) - yytype_int16 *bottom; - yytype_int16 *top; -#endif -{ - YYFPRINTF (stderr, "Stack now"); - for (; bottom <= top; ++bottom) - YYFPRINTF (stderr, " %d", *bottom); - YYFPRINTF (stderr, "\n"); -} - -# define YY_STACK_PRINT(Bottom, Top) \ -do { \ - if (yydebug) \ - yy_stack_print ((Bottom), (Top)); \ -} while (YYID (0)) - - -/*------------------------------------------------. -| Report that the YYRULE is going to be reduced. | -`------------------------------------------------*/ - -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static void -yy_reduce_print (YYSTYPE *yyvsp, YYLTYPE *yylsp, int yyrule) -#else -static void -yy_reduce_print (yyvsp, yylsp, yyrule) - YYSTYPE *yyvsp; - YYLTYPE *yylsp; - int yyrule; -#endif -{ - int yynrhs = yyr2[yyrule]; - int yyi; - unsigned long int yylno = yyrline[yyrule]; - YYFPRINTF (stderr, "Reducing stack by rule %d (line %lu):\n", - yyrule - 1, yylno); - /* The symbols being reduced. */ - for (yyi = 0; yyi < yynrhs; yyi++) - { - fprintf (stderr, " $%d = ", yyi + 1); - yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi], - &(yyvsp[(yyi + 1) - (yynrhs)]) - , &(yylsp[(yyi + 1) - (yynrhs)]) ); - fprintf (stderr, "\n"); - } -} - -# define YY_REDUCE_PRINT(Rule) \ -do { \ - if (yydebug) \ - yy_reduce_print (yyvsp, yylsp, Rule); \ -} while (YYID (0)) - -/* Nonzero means print parse trace. It is left uninitialized so that - multiple parsers can coexist. */ -int yydebug; -#else /* !YYDEBUG */ -# define YYDPRINTF(Args) -# define YY_SYMBOL_PRINT(Title, Type, Value, Location) -# define YY_STACK_PRINT(Bottom, Top) -# define YY_REDUCE_PRINT(Rule) -#endif /* !YYDEBUG */ - - -/* YYINITDEPTH -- initial size of the parser's stacks. */ -#ifndef YYINITDEPTH -# define YYINITDEPTH 200 -#endif - -/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only - if the built-in stack extension method is used). - - Do not make this value too large; the results are undefined if - YYSTACK_ALLOC_MAXIMUM < YYSTACK_BYTES (YYMAXDEPTH) - evaluated with infinite-precision integer arithmetic. */ - -#ifndef YYMAXDEPTH -# define YYMAXDEPTH 10000 -#endif - - - -#if YYERROR_VERBOSE - -# ifndef yystrlen -# if defined __GLIBC__ && defined _STRING_H -# define yystrlen strlen -# else -/* Return the length of YYSTR. */ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static YYSIZE_T -yystrlen (const char *yystr) -#else -static YYSIZE_T -yystrlen (yystr) - const char *yystr; -#endif -{ - YYSIZE_T yylen; - for (yylen = 0; yystr[yylen]; yylen++) - continue; - return yylen; -} -# endif -# endif - -# ifndef yystpcpy -# if defined __GLIBC__ && defined _STRING_H && defined _GNU_SOURCE -# define yystpcpy stpcpy -# else -/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in - YYDEST. */ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static char * -yystpcpy (char *yydest, const char *yysrc) -#else -static char * -yystpcpy (yydest, yysrc) - char *yydest; - const char *yysrc; -#endif -{ - char *yyd = yydest; - const char *yys = yysrc; - - while ((*yyd++ = *yys++) != '\0') - continue; - - return yyd - 1; -} -# endif -# endif - -# ifndef yytnamerr -/* Copy to YYRES the contents of YYSTR after stripping away unnecessary - quotes and backslashes, so that it's suitable for yyerror. The - heuristic is that double-quoting is unnecessary unless the string - contains an apostrophe, a comma, or backslash (other than - backslash-backslash). YYSTR is taken from yytname. If YYRES is - null, do not copy; instead, return the length of what the result - would have been. */ -static YYSIZE_T -yytnamerr (char *yyres, const char *yystr) -{ - if (*yystr == '"') - { - YYSIZE_T yyn = 0; - char const *yyp = yystr; - - for (;;) - switch (*++yyp) - { - case '\'': - case ',': - goto do_not_strip_quotes; - - case '\\': - if (*++yyp != '\\') - goto do_not_strip_quotes; - /* Fall through. */ - default: - if (yyres) - yyres[yyn] = *yyp; - yyn++; - break; - - case '"': - if (yyres) - yyres[yyn] = '\0'; - return yyn; - } - do_not_strip_quotes: ; - } - - if (! yyres) - return yystrlen (yystr); - - return yystpcpy (yyres, yystr) - yyres; -} -# endif - -/* Copy into YYRESULT an error message about the unexpected token - YYCHAR while in state YYSTATE. Return the number of bytes copied, - including the terminating null byte. If YYRESULT is null, do not - copy anything; just return the number of bytes that would be - copied. As a special case, return 0 if an ordinary "syntax error" - message will do. Return YYSIZE_MAXIMUM if overflow occurs during - size calculation. */ -static YYSIZE_T -yysyntax_error (char *yyresult, int yystate, int yychar) -{ - int yyn = yypact[yystate]; - - if (! (YYPACT_NINF < yyn && yyn <= YYLAST)) - return 0; - else - { - int yytype = YYTRANSLATE (yychar); - YYSIZE_T yysize0 = yytnamerr (0, yytname[yytype]); - YYSIZE_T yysize = yysize0; - YYSIZE_T yysize1; - int yysize_overflow = 0; - enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 }; - char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM]; - int yyx; - -# if 0 - /* This is so xgettext sees the translatable formats that are - constructed on the fly. */ - YY_("syntax error, unexpected %s"); - YY_("syntax error, unexpected %s, expecting %s"); - YY_("syntax error, unexpected %s, expecting %s or %s"); - YY_("syntax error, unexpected %s, expecting %s or %s or %s"); - YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s"); -# endif - char *yyfmt; - char const *yyf; - static char const yyunexpected[] = "syntax error, unexpected %s"; - static char const yyexpecting[] = ", expecting %s"; - static char const yyor[] = " or %s"; - char yyformat[sizeof yyunexpected - + sizeof yyexpecting - 1 - + ((YYERROR_VERBOSE_ARGS_MAXIMUM - 2) - * (sizeof yyor - 1))]; - char const *yyprefix = yyexpecting; - - /* Start YYX at -YYN if negative to avoid negative indexes in - YYCHECK. */ - int yyxbegin = yyn < 0 ? -yyn : 0; - - /* Stay within bounds of both yycheck and yytname. */ - int yychecklim = YYLAST - yyn + 1; - int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS; - int yycount = 1; - - yyarg[0] = yytname[yytype]; - yyfmt = yystpcpy (yyformat, yyunexpected); - - for (yyx = yyxbegin; yyx < yyxend; ++yyx) - if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR) - { - if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM) - { - yycount = 1; - yysize = yysize0; - yyformat[sizeof yyunexpected - 1] = '\0'; - break; - } - yyarg[yycount++] = yytname[yyx]; - yysize1 = yysize + yytnamerr (0, yytname[yyx]); - yysize_overflow |= (yysize1 < yysize); - yysize = yysize1; - yyfmt = yystpcpy (yyfmt, yyprefix); - yyprefix = yyor; - } - - yyf = YY_(yyformat); - yysize1 = yysize + yystrlen (yyf); - yysize_overflow |= (yysize1 < yysize); - yysize = yysize1; - - if (yysize_overflow) - return YYSIZE_MAXIMUM; - - if (yyresult) - { - /* Avoid sprintf, as that infringes on the user's name space. - Don't have undefined behavior even if the translation - produced a string with the wrong number of "%s"s. */ - char *yyp = yyresult; - int yyi = 0; - while ((*yyp = *yyf) != '\0') - { - if (*yyp == '%' && yyf[1] == 's' && yyi < yycount) - { - yyp += yytnamerr (yyp, yyarg[yyi++]); - yyf += 2; - } - else - { - yyp++; - yyf++; - } - } - } - return yysize; - } -} -#endif /* YYERROR_VERBOSE */ - - -/*-----------------------------------------------. -| Release the memory associated to this symbol. | -`-----------------------------------------------*/ - -/*ARGSUSED*/ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static void -yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep, YYLTYPE *yylocationp) -#else -static void -yydestruct (yymsg, yytype, yyvaluep, yylocationp) - const char *yymsg; - int yytype; - YYSTYPE *yyvaluep; - YYLTYPE *yylocationp; -#endif -{ - YYUSE (yyvaluep); - YYUSE (yylocationp); - - if (!yymsg) - yymsg = "Deleting"; - YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp); - - switch (yytype) - { - - default: - break; - } -} - - -/* Prevent warnings from -Wmissing-prototypes. */ - -#ifdef YYPARSE_PARAM -#if defined __STDC__ || defined __cplusplus -int yyparse (void *YYPARSE_PARAM); -#else -int yyparse (); -#endif -#else /* ! YYPARSE_PARAM */ -#if defined __STDC__ || defined __cplusplus -int yyparse (void); -#else -int yyparse (); -#endif -#endif /* ! YYPARSE_PARAM */ - - - -/* The look-ahead symbol. */ -int yychar; - -/* The semantic value of the look-ahead symbol. */ -YYSTYPE yylval; - -/* Number of syntax errors so far. */ -int yynerrs; -/* Location data for the look-ahead symbol. */ -YYLTYPE yylloc; - - - -/*----------. -| yyparse. | -`----------*/ - -#ifdef YYPARSE_PARAM -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -int -yyparse (void *YYPARSE_PARAM) -#else -int -yyparse (YYPARSE_PARAM) - void *YYPARSE_PARAM; -#endif -#else /* ! YYPARSE_PARAM */ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -int -yyparse (void) -#else -int -yyparse () - -#endif -#endif -{ - - int yystate; - int yyn; - int yyresult; - /* Number of tokens to shift before error messages enabled. */ - int yyerrstatus; - /* Look-ahead token as an internal (translated) token number. */ - int yytoken = 0; -#if YYERROR_VERBOSE - /* Buffer for error messages, and its allocated size. */ - char yymsgbuf[128]; - char *yymsg = yymsgbuf; - YYSIZE_T yymsg_alloc = sizeof yymsgbuf; -#endif - - /* Three stacks and their tools: - `yyss': related to states, - `yyvs': related to semantic values, - `yyls': related to locations. - - Refer to the stacks thru separate pointers, to allow yyoverflow - to reallocate them elsewhere. */ - - /* The state stack. */ - yytype_int16 yyssa[YYINITDEPTH]; - yytype_int16 *yyss = yyssa; - yytype_int16 *yyssp; - - /* The semantic value stack. */ - YYSTYPE yyvsa[YYINITDEPTH]; - YYSTYPE *yyvs = yyvsa; - YYSTYPE *yyvsp; - - /* The location stack. */ - YYLTYPE yylsa[YYINITDEPTH]; - YYLTYPE *yyls = yylsa; - YYLTYPE *yylsp; - /* The locations where the error started and ended. */ - YYLTYPE yyerror_range[2]; - -#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N), yylsp -= (N)) - - YYSIZE_T yystacksize = YYINITDEPTH; - - /* The variables used to return semantic value and location from the - action routines. */ - YYSTYPE yyval; - YYLTYPE yyloc; - - /* The number of symbols on the RHS of the reduced rule. - Keep to zero when no symbol should be popped. */ - int yylen = 0; - - YYDPRINTF ((stderr, "Starting parse\n")); - - yystate = 0; - yyerrstatus = 0; - yynerrs = 0; - yychar = YYEMPTY; /* Cause a token to be read. */ - - /* Initialize stack pointers. - Waste one element of value and location stack - so that they stay on the same level as the state stack. - The wasted elements are never initialized. */ - - yyssp = yyss; - yyvsp = yyvs; - yylsp = yyls; -#if YYLTYPE_IS_TRIVIAL - /* Initialize the default location before parsing starts. */ - yylloc.first_line = yylloc.last_line = 1; - yylloc.first_column = yylloc.last_column = 0; -#endif - - goto yysetstate; - -/*------------------------------------------------------------. -| yynewstate -- Push a new state, which is found in yystate. | -`------------------------------------------------------------*/ - yynewstate: - /* In all cases, when you get here, the value and location stacks - have just been pushed. So pushing a state here evens the stacks. */ - yyssp++; - - yysetstate: - *yyssp = yystate; - - if (yyss + yystacksize - 1 <= yyssp) - { - /* Get the current used size of the three stacks, in elements. */ - YYSIZE_T yysize = yyssp - yyss + 1; - -#ifdef yyoverflow - { - /* Give user a chance to reallocate the stack. Use copies of - these so that the &'s don't force the real ones into - memory. */ - YYSTYPE *yyvs1 = yyvs; - yytype_int16 *yyss1 = yyss; - YYLTYPE *yyls1 = yyls; - - /* Each stack pointer address is followed by the size of the - data in use in that stack, in bytes. This used to be a - conditional around just the two extra args, but that might - be undefined if yyoverflow is a macro. */ - yyoverflow (YY_("memory exhausted"), - &yyss1, yysize * sizeof (*yyssp), - &yyvs1, yysize * sizeof (*yyvsp), - &yyls1, yysize * sizeof (*yylsp), - &yystacksize); - yyls = yyls1; - yyss = yyss1; - yyvs = yyvs1; - } -#else /* no yyoverflow */ -# ifndef YYSTACK_RELOCATE - goto yyexhaustedlab; -# else - /* Extend the stack our own way. */ - if (YYMAXDEPTH <= yystacksize) - goto yyexhaustedlab; - yystacksize *= 2; - if (YYMAXDEPTH < yystacksize) - yystacksize = YYMAXDEPTH; - - { - yytype_int16 *yyss1 = yyss; - union yyalloc *yyptr = - (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize)); - if (! yyptr) - goto yyexhaustedlab; - YYSTACK_RELOCATE (yyss); - YYSTACK_RELOCATE (yyvs); - YYSTACK_RELOCATE (yyls); -# undef YYSTACK_RELOCATE - if (yyss1 != yyssa) - YYSTACK_FREE (yyss1); - } -# endif -#endif /* no yyoverflow */ - - yyssp = yyss + yysize - 1; - yyvsp = yyvs + yysize - 1; - yylsp = yyls + yysize - 1; - - YYDPRINTF ((stderr, "Stack size increased to %lu\n", - (unsigned long int) yystacksize)); - - if (yyss + yystacksize - 1 <= yyssp) - YYABORT; - } - - YYDPRINTF ((stderr, "Entering state %d\n", yystate)); - - goto yybackup; - -/*-----------. -| yybackup. | -`-----------*/ -yybackup: - - /* Do appropriate processing given the current state. Read a - look-ahead token if we need one and don't already have one. */ - - /* First try to decide what to do without reference to look-ahead token. */ - yyn = yypact[yystate]; - if (yyn == YYPACT_NINF) - goto yydefault; - - /* Not known => get a look-ahead token if don't already have one. */ - - /* YYCHAR is either YYEMPTY or YYEOF or a valid look-ahead symbol. */ - if (yychar == YYEMPTY) - { - YYDPRINTF ((stderr, "Reading a token: ")); - yychar = YYLEX; - } - - if (yychar <= YYEOF) - { - yychar = yytoken = YYEOF; - YYDPRINTF ((stderr, "Now at end of input.\n")); - } - else - { - yytoken = YYTRANSLATE (yychar); - YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc); - } - - /* If the proper action on seeing token YYTOKEN is to reduce or to - detect an error, take that action. */ - yyn += yytoken; - if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken) - goto yydefault; - yyn = yytable[yyn]; - if (yyn <= 0) - { - if (yyn == 0 || yyn == YYTABLE_NINF) - goto yyerrlab; - yyn = -yyn; - goto yyreduce; - } - - if (yyn == YYFINAL) - YYACCEPT; - - /* Count tokens shifted since error; after three, turn off error - status. */ - if (yyerrstatus) - yyerrstatus--; - - /* Shift the look-ahead token. */ - YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc); - - /* Discard the shifted token unless it is eof. */ - if (yychar != YYEOF) - yychar = YYEMPTY; - - yystate = yyn; - *++yyvsp = yylval; - *++yylsp = yylloc; - goto yynewstate; - - -/*-----------------------------------------------------------. -| yydefault -- do the default action for the current state. | -`-----------------------------------------------------------*/ -yydefault: - yyn = yydefact[yystate]; - if (yyn == 0) - goto yyerrlab; - goto yyreduce; - - -/*-----------------------------. -| yyreduce -- Do a reduction. | -`-----------------------------*/ -yyreduce: - /* yyn is the number of a rule to reduce with. */ - yylen = yyr2[yyn]; - - /* If YYLEN is nonzero, implement the default value of the action: - `$$ = $1'. - - Otherwise, the following line sets YYVAL to garbage. - This behavior is undocumented and Bison - users should not rely upon it. Assigning to YYVAL - unconditionally makes the parser a bit smaller, and it avoids a - GCC warning that YYVAL may be used uninitialized. */ - yyval = yyvsp[1-yylen]; - - /* Default location. */ - YYLLOC_DEFAULT (yyloc, (yylsp - yylen), yylen); - YY_REDUCE_PRINT (yyn); - switch (yyn) - { - case 2: -#line 90 "dtc-parser.y" - { - the_boot_info = build_boot_info((yyvsp[(3) - (4)].re), (yyvsp[(4) - (4)].node), 0); - ;} - break; - - case 3: -#line 94 "dtc-parser.y" - { - the_boot_info = build_boot_info((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].node), 0); - ;} - break; - - case 4: -#line 101 "dtc-parser.y" - { - (yyval.re) = NULL; - ;} - break; - - case 5: -#line 105 "dtc-parser.y" - { - (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re)); - ;} - break; - - case 6: -#line 112 "dtc-parser.y" - { - (yyval.re) = build_reserve_entry((yyvsp[(3) - (5)].addr), (yyvsp[(4) - (5)].addr), (yyvsp[(1) - (5)].labelref)); - ;} - break; - - case 7: -#line 119 "dtc-parser.y" - { - (yyval.re) = NULL; - ;} - break; - - case 8: -#line 123 "dtc-parser.y" - { - (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re)); - ;} - break; - - case 9: -#line 130 "dtc-parser.y" - { - (yyval.re) = (yyvsp[(1) - (1)].re); - ;} - break; - - case 10: -#line 134 "dtc-parser.y" - { - (yyval.re) = build_reserve_entry((yyvsp[(3) - (6)].addr), (yyvsp[(5) - (6)].addr) - (yyvsp[(3) - (6)].addr) + 1, (yyvsp[(1) - (6)].labelref)); - ;} - break; - - case 11: -#line 141 "dtc-parser.y" - { - (yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 0, 64); - ;} - break; - - case 12: -#line 145 "dtc-parser.y" - { - (yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 16, 64); - ;} - break; - - case 13: -#line 152 "dtc-parser.y" - { - (yyval.node) = name_node((yyvsp[(2) - (2)].node), "", NULL); - ;} - break; - - case 14: -#line 159 "dtc-parser.y" - { - (yyval.node) = build_node((yyvsp[(2) - (5)].proplist), (yyvsp[(3) - (5)].nodelist)); - ;} - break; - - case 15: -#line 166 "dtc-parser.y" - { - (yyval.proplist) = NULL; - ;} - break; - - case 16: -#line 170 "dtc-parser.y" - { - (yyval.proplist) = chain_property((yyvsp[(2) - (2)].prop), (yyvsp[(1) - (2)].proplist)); - ;} - break; - - case 17: -#line 177 "dtc-parser.y" - { - (yyval.prop) = build_property((yyvsp[(2) - (5)].propnodename), (yyvsp[(4) - (5)].data), (yyvsp[(1) - (5)].labelref)); - ;} - break; - - case 18: -#line 181 "dtc-parser.y" - { - (yyval.prop) = build_property((yyvsp[(2) - (3)].propnodename), empty_data, (yyvsp[(1) - (3)].labelref)); - ;} - break; - - case 19: -#line 188 "dtc-parser.y" - { - (yyval.data) = data_merge((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].data)); - ;} - break; - - case 20: -#line 192 "dtc-parser.y" - { - (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data)); - ;} - break; - - case 21: -#line 196 "dtc-parser.y" - { - (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data)); - ;} - break; - - case 22: -#line 200 "dtc-parser.y" - { - (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), REF_PATH, (yyvsp[(2) - (2)].labelref)); - ;} - break; - - case 23: -#line 204 "dtc-parser.y" - { - struct search_path path = { srcpos_file->dir, NULL, NULL }; - struct dtc_file *file = dtc_open_file((yyvsp[(4) - (9)].data).val, &path); - struct data d = empty_data; - - if ((yyvsp[(6) - (9)].addr) != 0) - if (fseek(file->file, (yyvsp[(6) - (9)].addr), SEEK_SET) != 0) - yyerrorf("Couldn't seek to offset %llu in \"%s\": %s", - (unsigned long long)(yyvsp[(6) - (9)].addr), - (yyvsp[(4) - (9)].data).val, strerror(errno)); - - d = data_copy_file(file->file, (yyvsp[(8) - (9)].addr)); - - (yyval.data) = data_merge((yyvsp[(1) - (9)].data), d); - dtc_close_file(file); - ;} - break; - - case 24: -#line 221 "dtc-parser.y" - { - struct search_path path = { srcpos_file->dir, NULL, NULL }; - struct dtc_file *file = dtc_open_file((yyvsp[(4) - (5)].data).val, &path); - struct data d = empty_data; - - d = data_copy_file(file->file, -1); - - (yyval.data) = data_merge((yyvsp[(1) - (5)].data), d); - dtc_close_file(file); - ;} - break; - - case 25: -#line 232 "dtc-parser.y" - { - (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); - ;} - break; - - case 26: -#line 239 "dtc-parser.y" - { - (yyval.data) = empty_data; - ;} - break; - - case 27: -#line 243 "dtc-parser.y" - { - (yyval.data) = (yyvsp[(1) - (2)].data); - ;} - break; - - case 28: -#line 247 "dtc-parser.y" - { - (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); - ;} - break; - - case 29: -#line 254 "dtc-parser.y" - { - (yyval.data) = empty_data; - ;} - break; - - case 30: -#line 258 "dtc-parser.y" - { - (yyval.data) = data_append_cell((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].cell)); - ;} - break; - - case 31: -#line 262 "dtc-parser.y" - { - (yyval.data) = data_append_cell(data_add_marker((yyvsp[(1) - (2)].data), REF_PHANDLE, - (yyvsp[(2) - (2)].labelref)), -1); - ;} - break; - - case 32: -#line 267 "dtc-parser.y" - { - (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); - ;} - break; - - case 33: -#line 274 "dtc-parser.y" - { - (yyval.cbase) = 16; - ;} - break; - - case 35: -#line 282 "dtc-parser.y" - { - (yyval.cell) = eval_literal((yyvsp[(1) - (1)].literal), 0, 32); - ;} - break; - - case 36: -#line 286 "dtc-parser.y" - { - (yyval.cell) = eval_literal((yyvsp[(2) - (2)].literal), (yyvsp[(1) - (2)].cbase), 32); - ;} - break; - - case 37: -#line 293 "dtc-parser.y" - { - (yyval.data) = empty_data; - ;} - break; - - case 38: -#line 297 "dtc-parser.y" - { - (yyval.data) = data_append_byte((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].byte)); - ;} - break; - - case 39: -#line 301 "dtc-parser.y" - { - (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); - ;} - break; - - case 40: -#line 308 "dtc-parser.y" - { - (yyval.nodelist) = NULL; - ;} - break; - - case 41: -#line 312 "dtc-parser.y" - { - (yyval.nodelist) = chain_node((yyvsp[(1) - (2)].node), (yyvsp[(2) - (2)].nodelist)); - ;} - break; - - case 42: -#line 316 "dtc-parser.y" - { - yyerror("syntax error: properties must precede subnodes"); - YYERROR; - ;} - break; - - case 43: -#line 324 "dtc-parser.y" - { - (yyval.node) = name_node((yyvsp[(3) - (3)].node), (yyvsp[(2) - (3)].propnodename), (yyvsp[(1) - (3)].labelref)); - ;} - break; - - case 44: -#line 331 "dtc-parser.y" - { - (yyval.labelref) = NULL; - ;} - break; - - case 45: -#line 335 "dtc-parser.y" - { - (yyval.labelref) = (yyvsp[(1) - (1)].labelref); - ;} - break; - - -/* Line 1267 of yacc.c. */ -#line 1780 "dtc-parser.tab.c" - default: break; - } - YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc); - - YYPOPSTACK (yylen); - yylen = 0; - YY_STACK_PRINT (yyss, yyssp); - - *++yyvsp = yyval; - *++yylsp = yyloc; - - /* Now `shift' the result of the reduction. Determine what state - that goes to, based on the state we popped back to and the rule - number reduced by. */ - - yyn = yyr1[yyn]; - - yystate = yypgoto[yyn - YYNTOKENS] + *yyssp; - if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp) - yystate = yytable[yystate]; - else - yystate = yydefgoto[yyn - YYNTOKENS]; - - goto yynewstate; - - -/*------------------------------------. -| yyerrlab -- here on detecting error | -`------------------------------------*/ -yyerrlab: - /* If not already recovering from an error, report this error. */ - if (!yyerrstatus) - { - ++yynerrs; -#if ! YYERROR_VERBOSE - yyerror (YY_("syntax error")); -#else - { - YYSIZE_T yysize = yysyntax_error (0, yystate, yychar); - if (yymsg_alloc < yysize && yymsg_alloc < YYSTACK_ALLOC_MAXIMUM) - { - YYSIZE_T yyalloc = 2 * yysize; - if (! (yysize <= yyalloc && yyalloc <= YYSTACK_ALLOC_MAXIMUM)) - yyalloc = YYSTACK_ALLOC_MAXIMUM; - if (yymsg != yymsgbuf) - YYSTACK_FREE (yymsg); - yymsg = (char *) YYSTACK_ALLOC (yyalloc); - if (yymsg) - yymsg_alloc = yyalloc; - else - { - yymsg = yymsgbuf; - yymsg_alloc = sizeof yymsgbuf; - } - } - - if (0 < yysize && yysize <= yymsg_alloc) - { - (void) yysyntax_error (yymsg, yystate, yychar); - yyerror (yymsg); - } - else - { - yyerror (YY_("syntax error")); - if (yysize != 0) - goto yyexhaustedlab; - } - } -#endif - } - - yyerror_range[0] = yylloc; - - if (yyerrstatus == 3) - { - /* If just tried and failed to reuse look-ahead token after an - error, discard it. */ - - if (yychar <= YYEOF) - { - /* Return failure if at end of input. */ - if (yychar == YYEOF) - YYABORT; - } - else - { - yydestruct ("Error: discarding", - yytoken, &yylval, &yylloc); - yychar = YYEMPTY; - } - } - - /* Else will try to reuse look-ahead token after shifting the error - token. */ - goto yyerrlab1; - - -/*---------------------------------------------------. -| yyerrorlab -- error raised explicitly by YYERROR. | -`---------------------------------------------------*/ -yyerrorlab: - - /* Pacify compilers like GCC when the user code never invokes - YYERROR and the label yyerrorlab therefore never appears in user - code. */ - if (/*CONSTCOND*/ 0) - goto yyerrorlab; - - yyerror_range[0] = yylsp[1-yylen]; - /* Do not reclaim the symbols of the rule which action triggered - this YYERROR. */ - YYPOPSTACK (yylen); - yylen = 0; - YY_STACK_PRINT (yyss, yyssp); - yystate = *yyssp; - goto yyerrlab1; - - -/*-------------------------------------------------------------. -| yyerrlab1 -- common code for both syntax error and YYERROR. | -`-------------------------------------------------------------*/ -yyerrlab1: - yyerrstatus = 3; /* Each real token shifted decrements this. */ - - for (;;) - { - yyn = yypact[yystate]; - if (yyn != YYPACT_NINF) - { - yyn += YYTERROR; - if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR) - { - yyn = yytable[yyn]; - if (0 < yyn) - break; - } - } - - /* Pop the current state because it cannot handle the error token. */ - if (yyssp == yyss) - YYABORT; - - yyerror_range[0] = *yylsp; - yydestruct ("Error: popping", - yystos[yystate], yyvsp, yylsp); - YYPOPSTACK (1); - yystate = *yyssp; - YY_STACK_PRINT (yyss, yyssp); - } - - if (yyn == YYFINAL) - YYACCEPT; - - *++yyvsp = yylval; - - yyerror_range[1] = yylloc; - /* Using YYLLOC is tempting, but would change the location of - the look-ahead. YYLOC is available though. */ - YYLLOC_DEFAULT (yyloc, (yyerror_range - 1), 2); - *++yylsp = yyloc; - - /* Shift the error token. */ - YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp); - - yystate = yyn; - goto yynewstate; - - -/*-------------------------------------. -| yyacceptlab -- YYACCEPT comes here. | -`-------------------------------------*/ -yyacceptlab: - yyresult = 0; - goto yyreturn; - -/*-----------------------------------. -| yyabortlab -- YYABORT comes here. | -`-----------------------------------*/ -yyabortlab: - yyresult = 1; - goto yyreturn; - -#ifndef yyoverflow -/*-------------------------------------------------. -| yyexhaustedlab -- memory exhaustion comes here. | -`-------------------------------------------------*/ -yyexhaustedlab: - yyerror (YY_("memory exhausted")); - yyresult = 2; - /* Fall through. */ -#endif - -yyreturn: - if (yychar != YYEOF && yychar != YYEMPTY) - yydestruct ("Cleanup: discarding lookahead", - yytoken, &yylval, &yylloc); - /* Do not reclaim the symbols of the rule which action triggered - this YYABORT or YYACCEPT. */ - YYPOPSTACK (yylen); - YY_STACK_PRINT (yyss, yyssp); - while (yyssp != yyss) - { - yydestruct ("Cleanup: popping", - yystos[*yyssp], yyvsp, yylsp); - YYPOPSTACK (1); - } -#ifndef yyoverflow - if (yyss != yyssa) - YYSTACK_FREE (yyss); -#endif -#if YYERROR_VERBOSE - if (yymsg != yymsgbuf) - YYSTACK_FREE (yymsg); -#endif - /* Make sure YYID is used. */ - return YYID (yyresult); -} - - -#line 340 "dtc-parser.y" - - -void yyerrorf(char const *s, ...) -{ - const char *fname = srcpos_file ? srcpos_file->name : ""; - va_list va; - va_start(va, s); - - if (strcmp(fname, "-") == 0) - fname = "stdin"; - - fprintf(stderr, "%s:%d ", fname, yylloc.first_line); - vfprintf(stderr, s, va); - fprintf(stderr, "\n"); - - treesource_error = 1; - va_end(va); -} - -void yyerror (char const *s) -{ - yyerrorf("%s", s); -} - -static unsigned long long eval_literal(const char *s, int base, int bits) -{ - unsigned long long val; - char *e; - - errno = 0; - val = strtoull(s, &e, base); - if (*e) - yyerror("bad characters in literal"); - else if ((errno == ERANGE) - || ((bits < 64) && (val >= (1ULL << bits)))) - yyerror("literal out of range"); - else if (errno != 0) - yyerror("bad literal"); - return val; -} - diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped b/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped deleted file mode 100644 index ba99100d55c9..000000000000 --- a/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped +++ /dev/null @@ -1,113 +0,0 @@ -/* A Bison parser, made by GNU Bison 2.3. */ - -/* Skeleton interface for Bison's Yacc-like parsers in C - - Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 - Free Software Foundation, Inc. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street, Fifth Floor, - Boston, MA 02110-1301, USA. */ - -/* As a special exception, you may create a larger work that contains - part or all of the Bison parser skeleton and distribute that work - under terms of your choice, so long as that work isn't itself a - parser generator using the skeleton or a modified version thereof - as a parser skeleton. Alternatively, if you modify or redistribute - the parser skeleton itself, you may (at your option) remove this - special exception, which will cause the skeleton and the resulting - Bison output files to be licensed under the GNU General Public - License without this special exception. - - This special exception was added by the Free Software Foundation in - version 2.2 of Bison. */ - -/* Tokens. */ -#ifndef YYTOKENTYPE -# define YYTOKENTYPE - /* Put the tokens into the symbol table, so that GDB and other debuggers - know about them. */ - enum yytokentype { - DT_V1 = 258, - DT_MEMRESERVE = 259, - DT_PROPNODENAME = 260, - DT_LITERAL = 261, - DT_LEGACYLITERAL = 262, - DT_BASE = 263, - DT_BYTE = 264, - DT_STRING = 265, - DT_LABEL = 266, - DT_REF = 267, - DT_INCBIN = 268 - }; -#endif -/* Tokens. */ -#define DT_V1 258 -#define DT_MEMRESERVE 259 -#define DT_PROPNODENAME 260 -#define DT_LITERAL 261 -#define DT_LEGACYLITERAL 262 -#define DT_BASE 263 -#define DT_BYTE 264 -#define DT_STRING 265 -#define DT_LABEL 266 -#define DT_REF 267 -#define DT_INCBIN 268 - - - - -#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED -typedef union YYSTYPE -#line 37 "dtc-parser.y" -{ - char *propnodename; - char *literal; - char *labelref; - unsigned int cbase; - uint8_t byte; - struct data data; - - uint64_t addr; - cell_t cell; - struct property *prop; - struct property *proplist; - struct node *node; - struct node *nodelist; - struct reserve_info *re; -} -/* Line 1489 of yacc.c. */ -#line 92 "dtc-parser.tab.h" - YYSTYPE; -# define yystype YYSTYPE /* obsolescent; will be withdrawn */ -# define YYSTYPE_IS_DECLARED 1 -# define YYSTYPE_IS_TRIVIAL 1 -#endif - -extern YYSTYPE yylval; - -#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED -typedef struct YYLTYPE -{ - int first_line; - int first_column; - int last_line; - int last_column; -} YYLTYPE; -# define yyltype YYLTYPE /* obsolescent; will be withdrawn */ -# define YYLTYPE_IS_DECLARED 1 -# define YYLTYPE_IS_TRIVIAL 1 -#endif - -extern YYLTYPE yylloc; diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.y b/arch/powerpc/boot/dtc-src/dtc-parser.y deleted file mode 100644 index b2ab562420ea..000000000000 --- a/arch/powerpc/boot/dtc-src/dtc-parser.y +++ /dev/null @@ -1,379 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -%locations - -%{ -#include - -#include "dtc.h" -#include "srcpos.h" - -extern int yylex(void); - -extern struct boot_info *the_boot_info; -extern int treesource_error; - -static unsigned long long eval_literal(const char *s, int base, int bits); -%} - -%union { - char *propnodename; - char *literal; - char *labelref; - unsigned int cbase; - uint8_t byte; - struct data data; - - uint64_t addr; - cell_t cell; - struct property *prop; - struct property *proplist; - struct node *node; - struct node *nodelist; - struct reserve_info *re; -} - -%token DT_V1 -%token DT_MEMRESERVE -%token DT_PROPNODENAME -%token DT_LITERAL -%token DT_LEGACYLITERAL -%token DT_BASE -%token DT_BYTE -%token DT_STRING -%token DT_LABEL -%token DT_REF -%token DT_INCBIN - -%type propdata -%type propdataprefix -%type memreserve -%type memreserves -%type v0_memreserve -%type v0_memreserves -%type addr -%type celllist -%type cellbase -%type cellval -%type bytestring -%type propdef -%type proplist - -%type devicetree -%type nodedef -%type subnode -%type subnodes -%type label - -%% - -sourcefile: - DT_V1 ';' memreserves devicetree - { - the_boot_info = build_boot_info($3, $4, 0); - } - | v0_memreserves devicetree - { - the_boot_info = build_boot_info($1, $2, 0); - } - ; - -memreserves: - /* empty */ - { - $$ = NULL; - } - | memreserve memreserves - { - $$ = chain_reserve_entry($1, $2); - } - ; - -memreserve: - label DT_MEMRESERVE addr addr ';' - { - $$ = build_reserve_entry($3, $4, $1); - } - ; - -v0_memreserves: - /* empty */ - { - $$ = NULL; - } - | v0_memreserve v0_memreserves - { - $$ = chain_reserve_entry($1, $2); - }; - ; - -v0_memreserve: - memreserve - { - $$ = $1; - } - | label DT_MEMRESERVE addr '-' addr ';' - { - $$ = build_reserve_entry($3, $5 - $3 + 1, $1); - } - ; - -addr: - DT_LITERAL - { - $$ = eval_literal($1, 0, 64); - } - | DT_LEGACYLITERAL - { - $$ = eval_literal($1, 16, 64); - } - ; - -devicetree: - '/' nodedef - { - $$ = name_node($2, "", NULL); - } - ; - -nodedef: - '{' proplist subnodes '}' ';' - { - $$ = build_node($2, $3); - } - ; - -proplist: - /* empty */ - { - $$ = NULL; - } - | proplist propdef - { - $$ = chain_property($2, $1); - } - ; - -propdef: - label DT_PROPNODENAME '=' propdata ';' - { - $$ = build_property($2, $4, $1); - } - | label DT_PROPNODENAME ';' - { - $$ = build_property($2, empty_data, $1); - } - ; - -propdata: - propdataprefix DT_STRING - { - $$ = data_merge($1, $2); - } - | propdataprefix '<' celllist '>' - { - $$ = data_merge($1, $3); - } - | propdataprefix '[' bytestring ']' - { - $$ = data_merge($1, $3); - } - | propdataprefix DT_REF - { - $$ = data_add_marker($1, REF_PATH, $2); - } - | propdataprefix DT_INCBIN '(' DT_STRING ',' addr ',' addr ')' - { - struct search_path path = { srcpos_file->dir, NULL, NULL }; - struct dtc_file *file = dtc_open_file($4.val, &path); - struct data d = empty_data; - - if ($6 != 0) - if (fseek(file->file, $6, SEEK_SET) != 0) - yyerrorf("Couldn't seek to offset %llu in \"%s\": %s", - (unsigned long long)$6, - $4.val, strerror(errno)); - - d = data_copy_file(file->file, $8); - - $$ = data_merge($1, d); - dtc_close_file(file); - } - | propdataprefix DT_INCBIN '(' DT_STRING ')' - { - struct search_path path = { srcpos_file->dir, NULL, NULL }; - struct dtc_file *file = dtc_open_file($4.val, &path); - struct data d = empty_data; - - d = data_copy_file(file->file, -1); - - $$ = data_merge($1, d); - dtc_close_file(file); - } - | propdata DT_LABEL - { - $$ = data_add_marker($1, LABEL, $2); - } - ; - -propdataprefix: - /* empty */ - { - $$ = empty_data; - } - | propdata ',' - { - $$ = $1; - } - | propdataprefix DT_LABEL - { - $$ = data_add_marker($1, LABEL, $2); - } - ; - -celllist: - /* empty */ - { - $$ = empty_data; - } - | celllist cellval - { - $$ = data_append_cell($1, $2); - } - | celllist DT_REF - { - $$ = data_append_cell(data_add_marker($1, REF_PHANDLE, - $2), -1); - } - | celllist DT_LABEL - { - $$ = data_add_marker($1, LABEL, $2); - } - ; - -cellbase: - /* empty */ - { - $$ = 16; - } - | DT_BASE - ; - -cellval: - DT_LITERAL - { - $$ = eval_literal($1, 0, 32); - } - | cellbase DT_LEGACYLITERAL - { - $$ = eval_literal($2, $1, 32); - } - ; - -bytestring: - /* empty */ - { - $$ = empty_data; - } - | bytestring DT_BYTE - { - $$ = data_append_byte($1, $2); - } - | bytestring DT_LABEL - { - $$ = data_add_marker($1, LABEL, $2); - } - ; - -subnodes: - /* empty */ - { - $$ = NULL; - } - | subnode subnodes - { - $$ = chain_node($1, $2); - } - | subnode propdef - { - yyerror("syntax error: properties must precede subnodes"); - YYERROR; - } - ; - -subnode: - label DT_PROPNODENAME nodedef - { - $$ = name_node($3, $2, $1); - } - ; - -label: - /* empty */ - { - $$ = NULL; - } - | DT_LABEL - { - $$ = $1; - } - ; - -%% - -void yyerrorf(char const *s, ...) -{ - const char *fname = srcpos_file ? srcpos_file->name : ""; - va_list va; - va_start(va, s); - - if (strcmp(fname, "-") == 0) - fname = "stdin"; - - fprintf(stderr, "%s:%d ", fname, yylloc.first_line); - vfprintf(stderr, s, va); - fprintf(stderr, "\n"); - - treesource_error = 1; - va_end(va); -} - -void yyerror (char const *s) -{ - yyerrorf("%s", s); -} - -static unsigned long long eval_literal(const char *s, int base, int bits) -{ - unsigned long long val; - char *e; - - errno = 0; - val = strtoull(s, &e, base); - if (*e) - yyerror("bad characters in literal"); - else if ((errno == ERANGE) - || ((bits < 64) && (val >= (1ULL << bits)))) - yyerror("literal out of range"); - else if (errno != 0) - yyerror("bad literal"); - return val; -} diff --git a/arch/powerpc/boot/dtc-src/dtc.c b/arch/powerpc/boot/dtc-src/dtc.c deleted file mode 100644 index d8fd43b4ac1a..000000000000 --- a/arch/powerpc/boot/dtc-src/dtc.c +++ /dev/null @@ -1,226 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" -#include "srcpos.h" - -#include "version_gen.h" - -/* - * Command line options - */ -int quiet; /* Level of quietness */ -int reservenum; /* Number of memory reservation slots */ -int minsize; /* Minimum blob size */ -int padsize; /* Additional padding to blob */ - -char *join_path(const char *path, const char *name) -{ - int lenp = strlen(path); - int lenn = strlen(name); - int len; - int needslash = 1; - char *str; - - len = lenp + lenn + 2; - if ((lenp > 0) && (path[lenp-1] == '/')) { - needslash = 0; - len--; - } - - str = xmalloc(len); - memcpy(str, path, lenp); - if (needslash) { - str[lenp] = '/'; - lenp++; - } - memcpy(str+lenp, name, lenn+1); - return str; -} - -static void fill_fullpaths(struct node *tree, const char *prefix) -{ - struct node *child; - const char *unit; - - tree->fullpath = join_path(prefix, tree->name); - - unit = strchr(tree->name, '@'); - if (unit) - tree->basenamelen = unit - tree->name; - else - tree->basenamelen = strlen(tree->name); - - for_each_child(tree, child) - fill_fullpaths(child, tree->fullpath); -} - -static void __attribute__ ((noreturn)) usage(void) -{ - fprintf(stderr, "Usage:\n"); - fprintf(stderr, "\tdtc [options] \n"); - fprintf(stderr, "\nOptions:\n"); - fprintf(stderr, "\t-h\n"); - fprintf(stderr, "\t\tThis help text\n"); - fprintf(stderr, "\t-q\n"); - fprintf(stderr, "\t\tQuiet: -q suppress warnings, -qq errors, -qqq all\n"); - fprintf(stderr, "\t-I \n"); - fprintf(stderr, "\t\tInput formats are:\n"); - fprintf(stderr, "\t\t\tdts - device tree source text\n"); - fprintf(stderr, "\t\t\tdtb - device tree blob\n"); - fprintf(stderr, "\t\t\tfs - /proc/device-tree style directory\n"); - fprintf(stderr, "\t-o \n"); - fprintf(stderr, "\t-O \n"); - fprintf(stderr, "\t\tOutput formats are:\n"); - fprintf(stderr, "\t\t\tdts - device tree source text\n"); - fprintf(stderr, "\t\t\tdtb - device tree blob\n"); - fprintf(stderr, "\t\t\tasm - assembler source\n"); - fprintf(stderr, "\t-V \n"); - fprintf(stderr, "\t\tBlob version to produce, defaults to %d (relevant for dtb\n\t\tand asm output only)\n", DEFAULT_FDT_VERSION); - fprintf(stderr, "\t-R \n"); - fprintf(stderr, "\t\tMake space for reserve map entries (relevant for \n\t\tdtb and asm output only)\n"); - fprintf(stderr, "\t-S \n"); - fprintf(stderr, "\t\tMake the blob at least long (extra space)\n"); - fprintf(stderr, "\t-p \n"); - fprintf(stderr, "\t\tAdd padding to the blob of long (extra space)\n"); - fprintf(stderr, "\t-b \n"); - fprintf(stderr, "\t\tSet the physical boot cpu\n"); - fprintf(stderr, "\t-f\n"); - fprintf(stderr, "\t\tForce - try to produce output even if the input tree has errors\n"); - fprintf(stderr, "\t-v\n"); - fprintf(stderr, "\t\tPrint DTC version and exit\n"); - exit(3); -} - -int main(int argc, char *argv[]) -{ - struct boot_info *bi; - const char *inform = "dts"; - const char *outform = "dts"; - const char *outname = "-"; - int force = 0, check = 0; - const char *arg; - int opt; - FILE *outf = NULL; - int outversion = DEFAULT_FDT_VERSION; - long long cmdline_boot_cpuid = -1; - - quiet = 0; - reservenum = 0; - minsize = 0; - padsize = 0; - - while ((opt = getopt(argc, argv, "hI:O:o:V:R:S:p:fcqb:v")) != EOF) { - switch (opt) { - case 'I': - inform = optarg; - break; - case 'O': - outform = optarg; - break; - case 'o': - outname = optarg; - break; - case 'V': - outversion = strtol(optarg, NULL, 0); - break; - case 'R': - reservenum = strtol(optarg, NULL, 0); - break; - case 'S': - minsize = strtol(optarg, NULL, 0); - break; - case 'p': - padsize = strtol(optarg, NULL, 0); - break; - case 'f': - force = 1; - break; - case 'c': - check = 1; - break; - case 'q': - quiet++; - break; - case 'b': - cmdline_boot_cpuid = strtoll(optarg, NULL, 0); - break; - case 'v': - printf("Version: %s\n", DTC_VERSION); - exit(0); - case 'h': - default: - usage(); - } - } - - if (argc > (optind+1)) - usage(); - else if (argc < (optind+1)) - arg = "-"; - else - arg = argv[optind]; - - /* minsize and padsize are mutually exclusive */ - if (minsize && padsize) - die("Can't set both -p and -S\n"); - - fprintf(stderr, "DTC: %s->%s on file \"%s\"\n", - inform, outform, arg); - - if (streq(inform, "dts")) - bi = dt_from_source(arg); - else if (streq(inform, "fs")) - bi = dt_from_fs(arg); - else if(streq(inform, "dtb")) - bi = dt_from_blob(arg); - else - die("Unknown input format \"%s\"\n", inform); - - if (cmdline_boot_cpuid != -1) - bi->boot_cpuid_phys = cmdline_boot_cpuid; - - fill_fullpaths(bi->dt, ""); - process_checks(force, bi); - - - if (streq(outname, "-")) { - outf = stdout; - } else { - outf = fopen(outname, "w"); - if (! outf) - die("Couldn't open output file %s: %s\n", - outname, strerror(errno)); - } - - if (streq(outform, "dts")) { - dt_to_source(outf, bi); - } else if (streq(outform, "dtb")) { - dt_to_blob(outf, bi, outversion); - } else if (streq(outform, "asm")) { - dt_to_asm(outf, bi, outversion); - } else if (streq(outform, "null")) { - /* do nothing */ - } else { - die("Unknown output format \"%s\"\n", outform); - } - - exit(0); -} diff --git a/arch/powerpc/boot/dtc-src/dtc.h b/arch/powerpc/boot/dtc-src/dtc.h deleted file mode 100644 index 08d54c870086..000000000000 --- a/arch/powerpc/boot/dtc-src/dtc.h +++ /dev/null @@ -1,246 +0,0 @@ -#ifndef _DTC_H -#define _DTC_H - -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define DEFAULT_FDT_VERSION 17 -/* - * Command line options - */ -extern int quiet; /* Level of quietness */ -extern int reservenum; /* Number of memory reservation slots */ -extern int minsize; /* Minimum blob size */ -extern int padsize; /* Additional padding to blob */ - -static inline void __attribute__((noreturn)) die(char * str, ...) -{ - va_list ap; - - va_start(ap, str); - fprintf(stderr, "FATAL ERROR: "); - vfprintf(stderr, str, ap); - exit(1); -} - -static inline void *xmalloc(size_t len) -{ - void *new = malloc(len); - - if (! new) - die("malloc() failed\n"); - - return new; -} - -static inline void *xrealloc(void *p, size_t len) -{ - void *new = realloc(p, len); - - if (! new) - die("realloc() failed (len=%d)\n", len); - - return new; -} - -typedef uint32_t cell_t; - - -#define streq(a, b) (strcmp((a), (b)) == 0) -#define strneq(a, b, n) (strncmp((a), (b), (n)) == 0) - -#define ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1)) -#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) - -/* Data blobs */ -enum markertype { - REF_PHANDLE, - REF_PATH, - LABEL, -}; - -struct marker { - enum markertype type; - int offset; - char *ref; - struct marker *next; -}; - -struct data { - int len; - char *val; - struct marker *markers; -}; - - -#define empty_data ((struct data){ /* all .members = 0 or NULL */ }) - -#define for_each_marker(m) \ - for (; (m); (m) = (m)->next) -#define for_each_marker_of_type(m, t) \ - for_each_marker(m) \ - if ((m)->type == (t)) - -void data_free(struct data d); - -struct data data_grow_for(struct data d, int xlen); - -struct data data_copy_mem(const char *mem, int len); -struct data data_copy_escape_string(const char *s, int len); -struct data data_copy_file(FILE *f, size_t len); - -struct data data_append_data(struct data d, const void *p, int len); -struct data data_insert_at_marker(struct data d, struct marker *m, - const void *p, int len); -struct data data_merge(struct data d1, struct data d2); -struct data data_append_cell(struct data d, cell_t word); -struct data data_append_re(struct data d, const struct fdt_reserve_entry *re); -struct data data_append_addr(struct data d, uint64_t addr); -struct data data_append_byte(struct data d, uint8_t byte); -struct data data_append_zeroes(struct data d, int len); -struct data data_append_align(struct data d, int align); - -struct data data_add_marker(struct data d, enum markertype type, char *ref); - -int data_is_one_string(struct data d); - -/* DT constraints */ - -#define MAX_PROPNAME_LEN 31 -#define MAX_NODENAME_LEN 31 - -/* Live trees */ -struct property { - char *name; - struct data val; - - struct property *next; - - char *label; -}; - -struct node { - char *name; - struct property *proplist; - struct node *children; - - struct node *parent; - struct node *next_sibling; - - char *fullpath; - int basenamelen; - - cell_t phandle; - int addr_cells, size_cells; - - char *label; -}; - -#define for_each_property(n, p) \ - for ((p) = (n)->proplist; (p); (p) = (p)->next) - -#define for_each_child(n, c) \ - for ((c) = (n)->children; (c); (c) = (c)->next_sibling) - -struct property *build_property(char *name, struct data val, char *label); -struct property *chain_property(struct property *first, struct property *list); -struct property *reverse_properties(struct property *first); - -struct node *build_node(struct property *proplist, struct node *children); -struct node *name_node(struct node *node, char *name, char *label); -struct node *chain_node(struct node *first, struct node *list); - -void add_property(struct node *node, struct property *prop); -void add_child(struct node *parent, struct node *child); - -const char *get_unitname(struct node *node); -struct property *get_property(struct node *node, const char *propname); -cell_t propval_cell(struct property *prop); -struct node *get_subnode(struct node *node, const char *nodename); -struct node *get_node_by_path(struct node *tree, const char *path); -struct node *get_node_by_label(struct node *tree, const char *label); -struct node *get_node_by_phandle(struct node *tree, cell_t phandle); -struct node *get_node_by_ref(struct node *tree, const char *ref); -cell_t get_node_phandle(struct node *root, struct node *node); - -/* Boot info (tree plus memreserve information */ - -struct reserve_info { - struct fdt_reserve_entry re; - - struct reserve_info *next; - - char *label; -}; - -struct reserve_info *build_reserve_entry(uint64_t start, uint64_t len, char *label); -struct reserve_info *chain_reserve_entry(struct reserve_info *first, - struct reserve_info *list); -struct reserve_info *add_reserve_entry(struct reserve_info *list, - struct reserve_info *new); - - -struct boot_info { - struct reserve_info *reservelist; - struct node *dt; /* the device tree */ - uint32_t boot_cpuid_phys; -}; - -struct boot_info *build_boot_info(struct reserve_info *reservelist, - struct node *tree, uint32_t boot_cpuid_phys); - -/* Checks */ - -void process_checks(int force, struct boot_info *bi); - -/* Flattened trees */ - -void dt_to_blob(FILE *f, struct boot_info *bi, int version); -void dt_to_asm(FILE *f, struct boot_info *bi, int version); - -struct boot_info *dt_from_blob(const char *fname); - -/* Tree source */ - -void dt_to_source(FILE *f, struct boot_info *bi); -struct boot_info *dt_from_source(const char *f); - -/* FS trees */ - -struct boot_info *dt_from_fs(const char *dirname); - -/* misc */ - -char *join_path(const char *path, const char *name); - -#endif /* _DTC_H */ diff --git a/arch/powerpc/boot/dtc-src/flattree.c b/arch/powerpc/boot/dtc-src/flattree.c deleted file mode 100644 index 76acd28c068d..000000000000 --- a/arch/powerpc/boot/dtc-src/flattree.c +++ /dev/null @@ -1,906 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" -#include "srcpos.h" - -#define FTF_FULLPATH 0x1 -#define FTF_VARALIGN 0x2 -#define FTF_NAMEPROPS 0x4 -#define FTF_BOOTCPUID 0x8 -#define FTF_STRTABSIZE 0x10 -#define FTF_STRUCTSIZE 0x20 -#define FTF_NOPS 0x40 - -static struct version_info { - int version; - int last_comp_version; - int hdr_size; - int flags; -} version_table[] = { - {1, 1, FDT_V1_SIZE, - FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS}, - {2, 1, FDT_V2_SIZE, - FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS|FTF_BOOTCPUID}, - {3, 1, FDT_V3_SIZE, - FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS|FTF_BOOTCPUID|FTF_STRTABSIZE}, - {16, 16, FDT_V3_SIZE, - FTF_BOOTCPUID|FTF_STRTABSIZE|FTF_NOPS}, - {17, 16, FDT_V17_SIZE, - FTF_BOOTCPUID|FTF_STRTABSIZE|FTF_STRUCTSIZE|FTF_NOPS}, -}; - -struct emitter { - void (*cell)(void *, cell_t); - void (*string)(void *, char *, int); - void (*align)(void *, int); - void (*data)(void *, struct data); - void (*beginnode)(void *, const char *); - void (*endnode)(void *, const char *); - void (*property)(void *, const char *); -}; - -static void bin_emit_cell(void *e, cell_t val) -{ - struct data *dtbuf = e; - - *dtbuf = data_append_cell(*dtbuf, val); -} - -static void bin_emit_string(void *e, char *str, int len) -{ - struct data *dtbuf = e; - - if (len == 0) - len = strlen(str); - - *dtbuf = data_append_data(*dtbuf, str, len); - *dtbuf = data_append_byte(*dtbuf, '\0'); -} - -static void bin_emit_align(void *e, int a) -{ - struct data *dtbuf = e; - - *dtbuf = data_append_align(*dtbuf, a); -} - -static void bin_emit_data(void *e, struct data d) -{ - struct data *dtbuf = e; - - *dtbuf = data_append_data(*dtbuf, d.val, d.len); -} - -static void bin_emit_beginnode(void *e, const char *label) -{ - bin_emit_cell(e, FDT_BEGIN_NODE); -} - -static void bin_emit_endnode(void *e, const char *label) -{ - bin_emit_cell(e, FDT_END_NODE); -} - -static void bin_emit_property(void *e, const char *label) -{ - bin_emit_cell(e, FDT_PROP); -} - -static struct emitter bin_emitter = { - .cell = bin_emit_cell, - .string = bin_emit_string, - .align = bin_emit_align, - .data = bin_emit_data, - .beginnode = bin_emit_beginnode, - .endnode = bin_emit_endnode, - .property = bin_emit_property, -}; - -static void emit_label(FILE *f, const char *prefix, const char *label) -{ - fprintf(f, "\t.globl\t%s_%s\n", prefix, label); - fprintf(f, "%s_%s:\n", prefix, label); - fprintf(f, "_%s_%s:\n", prefix, label); -} - -static void emit_offset_label(FILE *f, const char *label, int offset) -{ - fprintf(f, "\t.globl\t%s\n", label); - fprintf(f, "%s\t= . + %d\n", label, offset); -} - -static void asm_emit_cell(void *e, cell_t val) -{ - FILE *f = e; - - fprintf(f, "\t.long\t0x%x\n", val); -} - -static void asm_emit_string(void *e, char *str, int len) -{ - FILE *f = e; - char c = 0; - - if (len != 0) { - /* XXX: ewww */ - c = str[len]; - str[len] = '\0'; - } - - fprintf(f, "\t.string\t\"%s\"\n", str); - - if (len != 0) { - str[len] = c; - } -} - -static void asm_emit_align(void *e, int a) -{ - FILE *f = e; - - fprintf(f, "\t.balign\t%d\n", a); -} - -static void asm_emit_data(void *e, struct data d) -{ - FILE *f = e; - int off = 0; - struct marker *m = d.markers; - - for_each_marker_of_type(m, LABEL) - emit_offset_label(f, m->ref, m->offset); - - while ((d.len - off) >= sizeof(uint32_t)) { - fprintf(f, "\t.long\t0x%x\n", - fdt32_to_cpu(*((uint32_t *)(d.val+off)))); - off += sizeof(uint32_t); - } - - while ((d.len - off) >= 1) { - fprintf(f, "\t.byte\t0x%hhx\n", d.val[off]); - off += 1; - } - - assert(off == d.len); -} - -static void asm_emit_beginnode(void *e, const char *label) -{ - FILE *f = e; - - if (label) { - fprintf(f, "\t.globl\t%s\n", label); - fprintf(f, "%s:\n", label); - } - fprintf(f, "\t.long\tFDT_BEGIN_NODE\n"); -} - -static void asm_emit_endnode(void *e, const char *label) -{ - FILE *f = e; - - fprintf(f, "\t.long\tFDT_END_NODE\n"); - if (label) { - fprintf(f, "\t.globl\t%s_end\n", label); - fprintf(f, "%s_end:\n", label); - } -} - -static void asm_emit_property(void *e, const char *label) -{ - FILE *f = e; - - if (label) { - fprintf(f, "\t.globl\t%s\n", label); - fprintf(f, "%s:\n", label); - } - fprintf(f, "\t.long\tFDT_PROP\n"); -} - -static struct emitter asm_emitter = { - .cell = asm_emit_cell, - .string = asm_emit_string, - .align = asm_emit_align, - .data = asm_emit_data, - .beginnode = asm_emit_beginnode, - .endnode = asm_emit_endnode, - .property = asm_emit_property, -}; - -static int stringtable_insert(struct data *d, const char *str) -{ - int i; - - /* FIXME: do this more efficiently? */ - - for (i = 0; i < d->len; i++) { - if (streq(str, d->val + i)) - return i; - } - - *d = data_append_data(*d, str, strlen(str)+1); - return i; -} - -static void flatten_tree(struct node *tree, struct emitter *emit, - void *etarget, struct data *strbuf, - struct version_info *vi) -{ - struct property *prop; - struct node *child; - int seen_name_prop = 0; - - emit->beginnode(etarget, tree->label); - - if (vi->flags & FTF_FULLPATH) - emit->string(etarget, tree->fullpath, 0); - else - emit->string(etarget, tree->name, 0); - - emit->align(etarget, sizeof(cell_t)); - - for_each_property(tree, prop) { - int nameoff; - - if (streq(prop->name, "name")) - seen_name_prop = 1; - - nameoff = stringtable_insert(strbuf, prop->name); - - emit->property(etarget, prop->label); - emit->cell(etarget, prop->val.len); - emit->cell(etarget, nameoff); - - if ((vi->flags & FTF_VARALIGN) && (prop->val.len >= 8)) - emit->align(etarget, 8); - - emit->data(etarget, prop->val); - emit->align(etarget, sizeof(cell_t)); - } - - if ((vi->flags & FTF_NAMEPROPS) && !seen_name_prop) { - emit->property(etarget, NULL); - emit->cell(etarget, tree->basenamelen+1); - emit->cell(etarget, stringtable_insert(strbuf, "name")); - - if ((vi->flags & FTF_VARALIGN) && ((tree->basenamelen+1) >= 8)) - emit->align(etarget, 8); - - emit->string(etarget, tree->name, tree->basenamelen); - emit->align(etarget, sizeof(cell_t)); - } - - for_each_child(tree, child) { - flatten_tree(child, emit, etarget, strbuf, vi); - } - - emit->endnode(etarget, tree->label); -} - -static struct data flatten_reserve_list(struct reserve_info *reservelist, - struct version_info *vi) -{ - struct reserve_info *re; - struct data d = empty_data; - static struct fdt_reserve_entry null_re = {0,0}; - int j; - - for (re = reservelist; re; re = re->next) { - d = data_append_re(d, &re->re); - } - /* - * Add additional reserved slots if the user asked for them. - */ - for (j = 0; j < reservenum; j++) { - d = data_append_re(d, &null_re); - } - - return d; -} - -static void make_fdt_header(struct fdt_header *fdt, - struct version_info *vi, - int reservesize, int dtsize, int strsize, - int boot_cpuid_phys) -{ - int reserve_off; - - reservesize += sizeof(struct fdt_reserve_entry); - - memset(fdt, 0xff, sizeof(*fdt)); - - fdt->magic = cpu_to_fdt32(FDT_MAGIC); - fdt->version = cpu_to_fdt32(vi->version); - fdt->last_comp_version = cpu_to_fdt32(vi->last_comp_version); - - /* Reserve map should be doubleword aligned */ - reserve_off = ALIGN(vi->hdr_size, 8); - - fdt->off_mem_rsvmap = cpu_to_fdt32(reserve_off); - fdt->off_dt_struct = cpu_to_fdt32(reserve_off + reservesize); - fdt->off_dt_strings = cpu_to_fdt32(reserve_off + reservesize - + dtsize); - fdt->totalsize = cpu_to_fdt32(reserve_off + reservesize + dtsize + strsize); - - if (vi->flags & FTF_BOOTCPUID) - fdt->boot_cpuid_phys = cpu_to_fdt32(boot_cpuid_phys); - if (vi->flags & FTF_STRTABSIZE) - fdt->size_dt_strings = cpu_to_fdt32(strsize); - if (vi->flags & FTF_STRUCTSIZE) - fdt->size_dt_struct = cpu_to_fdt32(dtsize); -} - -void dt_to_blob(FILE *f, struct boot_info *bi, int version) -{ - struct version_info *vi = NULL; - int i; - struct data blob = empty_data; - struct data reservebuf = empty_data; - struct data dtbuf = empty_data; - struct data strbuf = empty_data; - struct fdt_header fdt; - int padlen = 0; - - for (i = 0; i < ARRAY_SIZE(version_table); i++) { - if (version_table[i].version == version) - vi = &version_table[i]; - } - if (!vi) - die("Unknown device tree blob version %d\n", version); - - flatten_tree(bi->dt, &bin_emitter, &dtbuf, &strbuf, vi); - bin_emit_cell(&dtbuf, FDT_END); - - reservebuf = flatten_reserve_list(bi->reservelist, vi); - - /* Make header */ - make_fdt_header(&fdt, vi, reservebuf.len, dtbuf.len, strbuf.len, - bi->boot_cpuid_phys); - - /* - * If the user asked for more space than is used, adjust the totalsize. - */ - if (minsize > 0) { - padlen = minsize - fdt32_to_cpu(fdt.totalsize); - if ((padlen < 0) && (quiet < 1)) - fprintf(stderr, - "Warning: blob size %d >= minimum size %d\n", - fdt32_to_cpu(fdt.totalsize), minsize); - } - - if (padsize > 0) - padlen = padsize; - - if (padlen > 0) { - int tsize = fdt32_to_cpu(fdt.totalsize); - tsize += padlen; - fdt.totalsize = cpu_to_fdt32(tsize); - } - - /* - * Assemble the blob: start with the header, add with alignment - * the reserve buffer, add the reserve map terminating zeroes, - * the device tree itself, and finally the strings. - */ - blob = data_append_data(blob, &fdt, vi->hdr_size); - blob = data_append_align(blob, 8); - blob = data_merge(blob, reservebuf); - blob = data_append_zeroes(blob, sizeof(struct fdt_reserve_entry)); - blob = data_merge(blob, dtbuf); - blob = data_merge(blob, strbuf); - - /* - * If the user asked for more space than is used, pad out the blob. - */ - if (padlen > 0) - blob = data_append_zeroes(blob, padlen); - - fwrite(blob.val, blob.len, 1, f); - - if (ferror(f)) - die("Error writing device tree blob: %s\n", strerror(errno)); - - /* - * data_merge() frees the right-hand element so only the blob - * remains to be freed. - */ - data_free(blob); -} - -static void dump_stringtable_asm(FILE *f, struct data strbuf) -{ - const char *p; - int len; - - p = strbuf.val; - - while (p < (strbuf.val + strbuf.len)) { - len = strlen(p); - fprintf(f, "\t.string \"%s\"\n", p); - p += len+1; - } -} - -void dt_to_asm(FILE *f, struct boot_info *bi, int version) -{ - struct version_info *vi = NULL; - int i; - struct data strbuf = empty_data; - struct reserve_info *re; - const char *symprefix = "dt"; - - for (i = 0; i < ARRAY_SIZE(version_table); i++) { - if (version_table[i].version == version) - vi = &version_table[i]; - } - if (!vi) - die("Unknown device tree blob version %d\n", version); - - fprintf(f, "/* autogenerated by dtc, do not edit */\n\n"); - fprintf(f, "#define FDT_MAGIC 0x%x\n", FDT_MAGIC); - fprintf(f, "#define FDT_BEGIN_NODE 0x%x\n", FDT_BEGIN_NODE); - fprintf(f, "#define FDT_END_NODE 0x%x\n", FDT_END_NODE); - fprintf(f, "#define FDT_PROP 0x%x\n", FDT_PROP); - fprintf(f, "#define FDT_END 0x%x\n", FDT_END); - fprintf(f, "\n"); - - emit_label(f, symprefix, "blob_start"); - emit_label(f, symprefix, "header"); - fprintf(f, "\t.long\tFDT_MAGIC\t\t\t\t/* magic */\n"); - fprintf(f, "\t.long\t_%s_blob_abs_end - _%s_blob_start\t/* totalsize */\n", - symprefix, symprefix); - fprintf(f, "\t.long\t_%s_struct_start - _%s_blob_start\t/* off_dt_struct */\n", - symprefix, symprefix); - fprintf(f, "\t.long\t_%s_strings_start - _%s_blob_start\t/* off_dt_strings */\n", - symprefix, symprefix); - fprintf(f, "\t.long\t_%s_reserve_map - _%s_blob_start\t/* off_dt_strings */\n", - symprefix, symprefix); - fprintf(f, "\t.long\t%d\t\t\t\t\t/* version */\n", vi->version); - fprintf(f, "\t.long\t%d\t\t\t\t\t/* last_comp_version */\n", - vi->last_comp_version); - - if (vi->flags & FTF_BOOTCPUID) - fprintf(f, "\t.long\t%i\t\t\t\t\t/* boot_cpuid_phys */\n", - bi->boot_cpuid_phys); - - if (vi->flags & FTF_STRTABSIZE) - fprintf(f, "\t.long\t_%s_strings_end - _%s_strings_start\t/* size_dt_strings */\n", - symprefix, symprefix); - - if (vi->flags & FTF_STRUCTSIZE) - fprintf(f, "\t.long\t_%s_struct_end - _%s_struct_start\t/* size_dt_struct */\n", - symprefix, symprefix); - - /* - * Reserve map entries. - * Align the reserve map to a doubleword boundary. - * Each entry is an (address, size) pair of u64 values. - * Always supply a zero-sized temination entry. - */ - asm_emit_align(f, 8); - emit_label(f, symprefix, "reserve_map"); - - fprintf(f, "/* Memory reserve map from source file */\n"); - - /* - * Use .long on high and low halfs of u64s to avoid .quad - * as it appears .quad isn't available in some assemblers. - */ - for (re = bi->reservelist; re; re = re->next) { - if (re->label) { - fprintf(f, "\t.globl\t%s\n", re->label); - fprintf(f, "%s:\n", re->label); - } - fprintf(f, "\t.long\t0x%08x, 0x%08x\n", - (unsigned int)(re->re.address >> 32), - (unsigned int)(re->re.address & 0xffffffff)); - fprintf(f, "\t.long\t0x%08x, 0x%08x\n", - (unsigned int)(re->re.size >> 32), - (unsigned int)(re->re.size & 0xffffffff)); - } - for (i = 0; i < reservenum; i++) { - fprintf(f, "\t.long\t0, 0\n\t.long\t0, 0\n"); - } - - fprintf(f, "\t.long\t0, 0\n\t.long\t0, 0\n"); - - emit_label(f, symprefix, "struct_start"); - flatten_tree(bi->dt, &asm_emitter, f, &strbuf, vi); - fprintf(f, "\t.long\tFDT_END\n"); - emit_label(f, symprefix, "struct_end"); - - emit_label(f, symprefix, "strings_start"); - dump_stringtable_asm(f, strbuf); - emit_label(f, symprefix, "strings_end"); - - emit_label(f, symprefix, "blob_end"); - - /* - * If the user asked for more space than is used, pad it out. - */ - if (minsize > 0) { - fprintf(f, "\t.space\t%d - (_%s_blob_end - _%s_blob_start), 0\n", - minsize, symprefix, symprefix); - } - if (padsize > 0) { - fprintf(f, "\t.space\t%d, 0\n", padsize); - } - emit_label(f, symprefix, "blob_abs_end"); - - data_free(strbuf); -} - -struct inbuf { - char *base, *limit, *ptr; -}; - -static void inbuf_init(struct inbuf *inb, void *base, void *limit) -{ - inb->base = base; - inb->limit = limit; - inb->ptr = inb->base; -} - -static void flat_read_chunk(struct inbuf *inb, void *p, int len) -{ - if ((inb->ptr + len) > inb->limit) - die("Premature end of data parsing flat device tree\n"); - - memcpy(p, inb->ptr, len); - - inb->ptr += len; -} - -static uint32_t flat_read_word(struct inbuf *inb) -{ - uint32_t val; - - assert(((inb->ptr - inb->base) % sizeof(val)) == 0); - - flat_read_chunk(inb, &val, sizeof(val)); - - return fdt32_to_cpu(val); -} - -static void flat_realign(struct inbuf *inb, int align) -{ - int off = inb->ptr - inb->base; - - inb->ptr = inb->base + ALIGN(off, align); - if (inb->ptr > inb->limit) - die("Premature end of data parsing flat device tree\n"); -} - -static char *flat_read_string(struct inbuf *inb) -{ - int len = 0; - const char *p = inb->ptr; - char *str; - - do { - if (p >= inb->limit) - die("Premature end of data parsing flat device tree\n"); - len++; - } while ((*p++) != '\0'); - - str = strdup(inb->ptr); - - inb->ptr += len; - - flat_realign(inb, sizeof(uint32_t)); - - return str; -} - -static struct data flat_read_data(struct inbuf *inb, int len) -{ - struct data d = empty_data; - - if (len == 0) - return empty_data; - - d = data_grow_for(d, len); - d.len = len; - - flat_read_chunk(inb, d.val, len); - - flat_realign(inb, sizeof(uint32_t)); - - return d; -} - -static char *flat_read_stringtable(struct inbuf *inb, int offset) -{ - const char *p; - - p = inb->base + offset; - while (1) { - if (p >= inb->limit || p < inb->base) - die("String offset %d overruns string table\n", - offset); - - if (*p == '\0') - break; - - p++; - } - - return strdup(inb->base + offset); -} - -static struct property *flat_read_property(struct inbuf *dtbuf, - struct inbuf *strbuf, int flags) -{ - uint32_t proplen, stroff; - char *name; - struct data val; - - proplen = flat_read_word(dtbuf); - stroff = flat_read_word(dtbuf); - - name = flat_read_stringtable(strbuf, stroff); - - if ((flags & FTF_VARALIGN) && (proplen >= 8)) - flat_realign(dtbuf, 8); - - val = flat_read_data(dtbuf, proplen); - - return build_property(name, val, NULL); -} - - -static struct reserve_info *flat_read_mem_reserve(struct inbuf *inb) -{ - struct reserve_info *reservelist = NULL; - struct reserve_info *new; - const char *p; - struct fdt_reserve_entry re; - - /* - * Each entry is a pair of u64 (addr, size) values for 4 cell_t's. - * List terminates at an entry with size equal to zero. - * - * First pass, count entries. - */ - p = inb->ptr; - while (1) { - flat_read_chunk(inb, &re, sizeof(re)); - re.address = fdt64_to_cpu(re.address); - re.size = fdt64_to_cpu(re.size); - if (re.size == 0) - break; - - new = build_reserve_entry(re.address, re.size, NULL); - reservelist = add_reserve_entry(reservelist, new); - } - - return reservelist; -} - - -static char *nodename_from_path(const char *ppath, const char *cpath) -{ - int plen; - - plen = strlen(ppath); - - if (!strneq(ppath, cpath, plen)) - die("Path \"%s\" is not valid as a child of \"%s\"\n", - cpath, ppath); - - /* root node is a special case */ - if (!streq(ppath, "/")) - plen++; - - return strdup(cpath + plen); -} - -static struct node *unflatten_tree(struct inbuf *dtbuf, - struct inbuf *strbuf, - const char *parent_flatname, int flags) -{ - struct node *node; - char *flatname; - uint32_t val; - - node = build_node(NULL, NULL); - - flatname = flat_read_string(dtbuf); - - if (flags & FTF_FULLPATH) - node->name = nodename_from_path(parent_flatname, flatname); - else - node->name = flatname; - - do { - struct property *prop; - struct node *child; - - val = flat_read_word(dtbuf); - switch (val) { - case FDT_PROP: - if (node->children) - fprintf(stderr, "Warning: Flat tree input has " - "subnodes preceding a property.\n"); - prop = flat_read_property(dtbuf, strbuf, flags); - add_property(node, prop); - break; - - case FDT_BEGIN_NODE: - child = unflatten_tree(dtbuf,strbuf, flatname, flags); - add_child(node, child); - break; - - case FDT_END_NODE: - break; - - case FDT_END: - die("Premature FDT_END in device tree blob\n"); - break; - - case FDT_NOP: - if (!(flags & FTF_NOPS)) - fprintf(stderr, "Warning: NOP tag found in flat tree" - " version <16\n"); - - /* Ignore */ - break; - - default: - die("Invalid opcode word %08x in device tree blob\n", - val); - } - } while (val != FDT_END_NODE); - - return node; -} - - -struct boot_info *dt_from_blob(const char *fname) -{ - struct dtc_file *dtcf; - uint32_t magic, totalsize, version, size_dt, boot_cpuid_phys; - uint32_t off_dt, off_str, off_mem_rsvmap; - int rc; - char *blob; - struct fdt_header *fdt; - char *p; - struct inbuf dtbuf, strbuf; - struct inbuf memresvbuf; - int sizeleft; - struct reserve_info *reservelist; - struct node *tree; - uint32_t val; - int flags = 0; - - dtcf = dtc_open_file(fname, NULL); - - rc = fread(&magic, sizeof(magic), 1, dtcf->file); - if (ferror(dtcf->file)) - die("Error reading DT blob magic number: %s\n", - strerror(errno)); - if (rc < 1) { - if (feof(dtcf->file)) - die("EOF reading DT blob magic number\n"); - else - die("Mysterious short read reading magic number\n"); - } - - magic = fdt32_to_cpu(magic); - if (magic != FDT_MAGIC) - die("Blob has incorrect magic number\n"); - - rc = fread(&totalsize, sizeof(totalsize), 1, dtcf->file); - if (ferror(dtcf->file)) - die("Error reading DT blob size: %s\n", strerror(errno)); - if (rc < 1) { - if (feof(dtcf->file)) - die("EOF reading DT blob size\n"); - else - die("Mysterious short read reading blob size\n"); - } - - totalsize = fdt32_to_cpu(totalsize); - if (totalsize < FDT_V1_SIZE) - die("DT blob size (%d) is too small\n", totalsize); - - blob = xmalloc(totalsize); - - fdt = (struct fdt_header *)blob; - fdt->magic = cpu_to_fdt32(magic); - fdt->totalsize = cpu_to_fdt32(totalsize); - - sizeleft = totalsize - sizeof(magic) - sizeof(totalsize); - p = blob + sizeof(magic) + sizeof(totalsize); - - while (sizeleft) { - if (feof(dtcf->file)) - die("EOF before reading %d bytes of DT blob\n", - totalsize); - - rc = fread(p, 1, sizeleft, dtcf->file); - if (ferror(dtcf->file)) - die("Error reading DT blob: %s\n", - strerror(errno)); - - sizeleft -= rc; - p += rc; - } - - off_dt = fdt32_to_cpu(fdt->off_dt_struct); - off_str = fdt32_to_cpu(fdt->off_dt_strings); - off_mem_rsvmap = fdt32_to_cpu(fdt->off_mem_rsvmap); - version = fdt32_to_cpu(fdt->version); - boot_cpuid_phys = fdt32_to_cpu(fdt->boot_cpuid_phys); - - if (off_mem_rsvmap >= totalsize) - die("Mem Reserve structure offset exceeds total size\n"); - - if (off_dt >= totalsize) - die("DT structure offset exceeds total size\n"); - - if (off_str > totalsize) - die("String table offset exceeds total size\n"); - - if (version >= 3) { - uint32_t size_str = fdt32_to_cpu(fdt->size_dt_strings); - if (off_str+size_str > totalsize) - die("String table extends past total size\n"); - inbuf_init(&strbuf, blob + off_str, blob + off_str + size_str); - } else { - inbuf_init(&strbuf, blob + off_str, blob + totalsize); - } - - if (version >= 17) { - size_dt = fdt32_to_cpu(fdt->size_dt_struct); - if (off_dt+size_dt > totalsize) - die("Structure block extends past total size\n"); - } - - if (version < 16) { - flags |= FTF_FULLPATH | FTF_NAMEPROPS | FTF_VARALIGN; - } else { - flags |= FTF_NOPS; - } - - inbuf_init(&memresvbuf, - blob + off_mem_rsvmap, blob + totalsize); - inbuf_init(&dtbuf, blob + off_dt, blob + totalsize); - - reservelist = flat_read_mem_reserve(&memresvbuf); - - val = flat_read_word(&dtbuf); - - if (val != FDT_BEGIN_NODE) - die("Device tree blob doesn't begin with FDT_BEGIN_NODE (begins with 0x%08x)\n", val); - - tree = unflatten_tree(&dtbuf, &strbuf, "", flags); - - val = flat_read_word(&dtbuf); - if (val != FDT_END) - die("Device tree blob doesn't end with FDT_END\n"); - - free(blob); - - dtc_close_file(dtcf); - - return build_boot_info(reservelist, tree, boot_cpuid_phys); -} diff --git a/arch/powerpc/boot/dtc-src/fstree.c b/arch/powerpc/boot/dtc-src/fstree.c deleted file mode 100644 index 766b2694d935..000000000000 --- a/arch/powerpc/boot/dtc-src/fstree.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" - -#include -#include - -static struct node *read_fstree(const char *dirname) -{ - DIR *d; - struct dirent *de; - struct stat st; - struct node *tree; - - d = opendir(dirname); - if (!d) - die("Couldn't opendir() \"%s\": %s\n", dirname, strerror(errno)); - - tree = build_node(NULL, NULL); - - while ((de = readdir(d)) != NULL) { - char *tmpnam; - - if (streq(de->d_name, ".") - || streq(de->d_name, "..")) - continue; - - tmpnam = join_path(dirname, de->d_name); - - if (lstat(tmpnam, &st) < 0) - die("stat(%s): %s\n", tmpnam, strerror(errno)); - - if (S_ISREG(st.st_mode)) { - struct property *prop; - FILE *pfile; - - pfile = fopen(tmpnam, "r"); - if (! pfile) { - fprintf(stderr, - "WARNING: Cannot open %s: %s\n", - tmpnam, strerror(errno)); - } else { - prop = build_property(strdup(de->d_name), - data_copy_file(pfile, - st.st_size), - NULL); - add_property(tree, prop); - fclose(pfile); - } - } else if (S_ISDIR(st.st_mode)) { - struct node *newchild; - - newchild = read_fstree(tmpnam); - newchild = name_node(newchild, strdup(de->d_name), - NULL); - add_child(tree, newchild); - } - - free(tmpnam); - } - - return tree; -} - -struct boot_info *dt_from_fs(const char *dirname) -{ - struct node *tree; - - tree = read_fstree(dirname); - tree = name_node(tree, "", NULL); - - return build_boot_info(NULL, tree, 0); -} - diff --git a/arch/powerpc/boot/dtc-src/libfdt_env.h b/arch/powerpc/boot/dtc-src/libfdt_env.h deleted file mode 100644 index 449bf602daf1..000000000000 --- a/arch/powerpc/boot/dtc-src/libfdt_env.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef _LIBFDT_ENV_H -#define _LIBFDT_ENV_H - -#include -#include -#include - -#define _B(n) ((unsigned long long)((uint8_t *)&x)[n]) -static inline uint32_t fdt32_to_cpu(uint32_t x) -{ - return (_B(0) << 24) | (_B(1) << 16) | (_B(2) << 8) | _B(3); -} -#define cpu_to_fdt32(x) fdt32_to_cpu(x) - -static inline uint64_t fdt64_to_cpu(uint64_t x) -{ - return (_B(0) << 56) | (_B(1) << 48) | (_B(2) << 40) | (_B(3) << 32) - | (_B(4) << 24) | (_B(5) << 16) | (_B(6) << 8) | _B(7); -} -#define cpu_to_fdt64(x) fdt64_to_cpu(x) -#undef _B - -#endif /* _LIBFDT_ENV_H */ diff --git a/arch/powerpc/boot/dtc-src/livetree.c b/arch/powerpc/boot/dtc-src/livetree.c deleted file mode 100644 index 0ca3de550b3f..000000000000 --- a/arch/powerpc/boot/dtc-src/livetree.c +++ /dev/null @@ -1,308 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" - -/* - * Tree building functions - */ - -struct property *build_property(char *name, struct data val, char *label) -{ - struct property *new = xmalloc(sizeof(*new)); - - new->name = name; - new->val = val; - - new->next = NULL; - - new->label = label; - - return new; -} - -struct property *chain_property(struct property *first, struct property *list) -{ - assert(first->next == NULL); - - first->next = list; - return first; -} - -struct property *reverse_properties(struct property *first) -{ - struct property *p = first; - struct property *head = NULL; - struct property *next; - - while (p) { - next = p->next; - p->next = head; - head = p; - p = next; - } - return head; -} - -struct node *build_node(struct property *proplist, struct node *children) -{ - struct node *new = xmalloc(sizeof(*new)); - struct node *child; - - memset(new, 0, sizeof(*new)); - - new->proplist = reverse_properties(proplist); - new->children = children; - - for_each_child(new, child) { - child->parent = new; - } - - return new; -} - -struct node *name_node(struct node *node, char *name, char * label) -{ - assert(node->name == NULL); - - node->name = name; - - node->label = label; - - return node; -} - -struct node *chain_node(struct node *first, struct node *list) -{ - assert(first->next_sibling == NULL); - - first->next_sibling = list; - return first; -} - -void add_property(struct node *node, struct property *prop) -{ - struct property **p; - - prop->next = NULL; - - p = &node->proplist; - while (*p) - p = &((*p)->next); - - *p = prop; -} - -void add_child(struct node *parent, struct node *child) -{ - struct node **p; - - child->next_sibling = NULL; - child->parent = parent; - - p = &parent->children; - while (*p) - p = &((*p)->next_sibling); - - *p = child; -} - -struct reserve_info *build_reserve_entry(uint64_t address, uint64_t size, - char *label) -{ - struct reserve_info *new = xmalloc(sizeof(*new)); - - new->re.address = address; - new->re.size = size; - - new->next = NULL; - - new->label = label; - - return new; -} - -struct reserve_info *chain_reserve_entry(struct reserve_info *first, - struct reserve_info *list) -{ - assert(first->next == NULL); - - first->next = list; - return first; -} - -struct reserve_info *add_reserve_entry(struct reserve_info *list, - struct reserve_info *new) -{ - struct reserve_info *last; - - new->next = NULL; - - if (! list) - return new; - - for (last = list; last->next; last = last->next) - ; - - last->next = new; - - return list; -} - -struct boot_info *build_boot_info(struct reserve_info *reservelist, - struct node *tree, uint32_t boot_cpuid_phys) -{ - struct boot_info *bi; - - bi = xmalloc(sizeof(*bi)); - bi->reservelist = reservelist; - bi->dt = tree; - bi->boot_cpuid_phys = boot_cpuid_phys; - - return bi; -} - -/* - * Tree accessor functions - */ - -const char *get_unitname(struct node *node) -{ - if (node->name[node->basenamelen] == '\0') - return ""; - else - return node->name + node->basenamelen + 1; -} - -struct property *get_property(struct node *node, const char *propname) -{ - struct property *prop; - - for_each_property(node, prop) - if (streq(prop->name, propname)) - return prop; - - return NULL; -} - -cell_t propval_cell(struct property *prop) -{ - assert(prop->val.len == sizeof(cell_t)); - return fdt32_to_cpu(*((cell_t *)prop->val.val)); -} - -struct node *get_subnode(struct node *node, const char *nodename) -{ - struct node *child; - - for_each_child(node, child) - if (streq(child->name, nodename)) - return child; - - return NULL; -} - -struct node *get_node_by_path(struct node *tree, const char *path) -{ - const char *p; - struct node *child; - - if (!path || ! (*path)) - return tree; - - while (path[0] == '/') - path++; - - p = strchr(path, '/'); - - for_each_child(tree, child) { - if (p && strneq(path, child->name, p-path)) - return get_node_by_path(child, p+1); - else if (!p && streq(path, child->name)) - return child; - } - - return NULL; -} - -struct node *get_node_by_label(struct node *tree, const char *label) -{ - struct node *child, *node; - - assert(label && (strlen(label) > 0)); - - if (tree->label && streq(tree->label, label)) - return tree; - - for_each_child(tree, child) { - node = get_node_by_label(child, label); - if (node) - return node; - } - - return NULL; -} - -struct node *get_node_by_phandle(struct node *tree, cell_t phandle) -{ - struct node *child, *node; - - assert((phandle != 0) && (phandle != -1)); - - if (tree->phandle == phandle) - return tree; - - for_each_child(tree, child) { - node = get_node_by_phandle(child, phandle); - if (node) - return node; - } - - return NULL; -} - -struct node *get_node_by_ref(struct node *tree, const char *ref) -{ - if (ref[0] == '/') - return get_node_by_path(tree, ref); - else - return get_node_by_label(tree, ref); -} - -cell_t get_node_phandle(struct node *root, struct node *node) -{ - static cell_t phandle = 1; /* FIXME: ick, static local */ - - if ((node->phandle != 0) && (node->phandle != -1)) - return node->phandle; - - assert(! get_property(node, "linux,phandle")); - - while (get_node_by_phandle(root, phandle)) - phandle++; - - node->phandle = phandle; - add_property(node, - build_property("linux,phandle", - data_append_cell(empty_data, phandle), - NULL)); - - return node->phandle; -} diff --git a/arch/powerpc/boot/dtc-src/srcpos.c b/arch/powerpc/boot/dtc-src/srcpos.c deleted file mode 100644 index 9641b7628b4d..000000000000 --- a/arch/powerpc/boot/dtc-src/srcpos.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * Copyright 2007 Jon Loeliger, Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" -#include "srcpos.h" - -/* - * Like yylineno, this is the current open file pos. - */ - -struct dtc_file *srcpos_file; - -static int dtc_open_one(struct dtc_file *file, - const char *search, - const char *fname) -{ - char *fullname; - - if (search) { - fullname = xmalloc(strlen(search) + strlen(fname) + 2); - - strcpy(fullname, search); - strcat(fullname, "/"); - strcat(fullname, fname); - } else { - fullname = strdup(fname); - } - - file->file = fopen(fullname, "r"); - if (!file->file) { - free(fullname); - return 0; - } - - file->name = fullname; - return 1; -} - - -struct dtc_file *dtc_open_file(const char *fname, - const struct search_path *search) -{ - static const struct search_path default_search = { NULL, NULL, NULL }; - - struct dtc_file *file; - const char *slash; - - file = xmalloc(sizeof(struct dtc_file)); - - slash = strrchr(fname, '/'); - if (slash) { - char *dir = xmalloc(slash - fname + 1); - - memcpy(dir, fname, slash - fname); - dir[slash - fname] = 0; - file->dir = dir; - } else { - file->dir = NULL; - } - - if (streq(fname, "-")) { - file->name = "stdin"; - file->file = stdin; - return file; - } - - if (fname[0] == '/') { - file->file = fopen(fname, "r"); - if (!file->file) - goto fail; - - file->name = strdup(fname); - return file; - } - - if (!search) - search = &default_search; - - while (search) { - if (dtc_open_one(file, search->dir, fname)) - return file; - - if (errno != ENOENT) - goto fail; - - search = search->next; - } - -fail: - die("Couldn't open \"%s\": %s\n", fname, strerror(errno)); -} - -void dtc_close_file(struct dtc_file *file) -{ - if (fclose(file->file)) - die("Error closing \"%s\": %s\n", file->name, strerror(errno)); - - free(file->dir); - free(file); -} diff --git a/arch/powerpc/boot/dtc-src/srcpos.h b/arch/powerpc/boot/dtc-src/srcpos.h deleted file mode 100644 index e17c7c04db8e..000000000000 --- a/arch/powerpc/boot/dtc-src/srcpos.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Copyright 2007 Jon Loeliger, Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -/* - * Augment the standard YYLTYPE with a filenum index into an - * array of all opened filenames. - */ - -#include - -struct dtc_file { - char *dir; - const char *name; - FILE *file; -}; - -#if ! defined(YYLTYPE) && ! defined(YYLTYPE_IS_DECLARED) -typedef struct YYLTYPE { - int first_line; - int first_column; - int last_line; - int last_column; - struct dtc_file *file; -} YYLTYPE; - -#define YYLTYPE_IS_DECLARED 1 -#define YYLTYPE_IS_TRIVIAL 1 -#endif - -/* Cater to old parser templates. */ -#ifndef YYID -#define YYID(n) (n) -#endif - -#define YYLLOC_DEFAULT(Current, Rhs, N) \ - do \ - if (YYID (N)) \ - { \ - (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \ - (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \ - (Current).last_line = YYRHSLOC (Rhs, N).last_line; \ - (Current).last_column = YYRHSLOC (Rhs, N).last_column; \ - (Current).file = YYRHSLOC (Rhs, N).file; \ - } \ - else \ - { \ - (Current).first_line = (Current).last_line = \ - YYRHSLOC (Rhs, 0).last_line; \ - (Current).first_column = (Current).last_column = \ - YYRHSLOC (Rhs, 0).last_column; \ - (Current).file = YYRHSLOC (Rhs, 0).file; \ - } \ - while (YYID (0)) - - - -extern void yyerror(char const *); -extern void yyerrorf(char const *, ...) __attribute__((format(printf, 1, 2))); - -extern struct dtc_file *srcpos_file; - -struct search_path { - const char *dir; /* NULL for current directory */ - struct search_path *prev, *next; -}; - -extern struct dtc_file *dtc_open_file(const char *fname, - const struct search_path *search); -extern void dtc_close_file(struct dtc_file *file); diff --git a/arch/powerpc/boot/dtc-src/treesource.c b/arch/powerpc/boot/dtc-src/treesource.c deleted file mode 100644 index ebeb6eb27907..000000000000 --- a/arch/powerpc/boot/dtc-src/treesource.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" -#include "srcpos.h" - -extern FILE *yyin; -extern int yyparse(void); - -struct boot_info *the_boot_info; -int treesource_error; - -struct boot_info *dt_from_source(const char *fname) -{ - the_boot_info = NULL; - treesource_error = 0; - - srcpos_file = dtc_open_file(fname, NULL); - yyin = srcpos_file->file; - - if (yyparse() != 0) - die("Unable to parse input tree\n"); - - if (treesource_error) - die("Syntax error parsing input tree\n"); - - return the_boot_info; -} - -static void write_prefix(FILE *f, int level) -{ - int i; - - for (i = 0; i < level; i++) - fputc('\t', f); -} - -int isstring(char c) -{ - return (isprint(c) - || (c == '\0') - || strchr("\a\b\t\n\v\f\r", c)); -} - -static void write_propval_string(FILE *f, struct data val) -{ - const char *str = val.val; - int i; - int newchunk = 1; - struct marker *m = val.markers; - - assert(str[val.len-1] == '\0'); - - for (i = 0; i < (val.len-1); i++) { - char c = str[i]; - - if (newchunk) { - while (m && (m->offset <= i)) { - if (m->type == LABEL) { - assert(m->offset == i); - fprintf(f, "%s: ", m->ref); - } - m = m->next; - } - fprintf(f, "\""); - newchunk = 0; - } - - switch (c) { - case '\a': - fprintf(f, "\\a"); - break; - case '\b': - fprintf(f, "\\b"); - break; - case '\t': - fprintf(f, "\\t"); - break; - case '\n': - fprintf(f, "\\n"); - break; - case '\v': - fprintf(f, "\\v"); - break; - case '\f': - fprintf(f, "\\f"); - break; - case '\r': - fprintf(f, "\\r"); - break; - case '\\': - fprintf(f, "\\\\"); - break; - case '\"': - fprintf(f, "\\\""); - break; - case '\0': - fprintf(f, "\", "); - newchunk = 1; - break; - default: - if (isprint(c)) - fprintf(f, "%c", c); - else - fprintf(f, "\\x%02hhx", c); - } - } - fprintf(f, "\""); - - /* Wrap up any labels at the end of the value */ - for_each_marker_of_type(m, LABEL) { - assert (m->offset == val.len); - fprintf(f, " %s:", m->ref); - } -} - -static void write_propval_cells(FILE *f, struct data val) -{ - void *propend = val.val + val.len; - cell_t *cp = (cell_t *)val.val; - struct marker *m = val.markers; - - fprintf(f, "<"); - for (;;) { - while (m && (m->offset <= ((char *)cp - val.val))) { - if (m->type == LABEL) { - assert(m->offset == ((char *)cp - val.val)); - fprintf(f, "%s: ", m->ref); - } - m = m->next; - } - - fprintf(f, "0x%x", fdt32_to_cpu(*cp++)); - if ((void *)cp >= propend) - break; - fprintf(f, " "); - } - - /* Wrap up any labels at the end of the value */ - for_each_marker_of_type(m, LABEL) { - assert (m->offset == val.len); - fprintf(f, " %s:", m->ref); - } - fprintf(f, ">"); -} - -static void write_propval_bytes(FILE *f, struct data val) -{ - void *propend = val.val + val.len; - const char *bp = val.val; - struct marker *m = val.markers; - - fprintf(f, "["); - for (;;) { - while (m && (m->offset == (bp-val.val))) { - if (m->type == LABEL) - fprintf(f, "%s: ", m->ref); - m = m->next; - } - - fprintf(f, "%02hhx", *bp++); - if ((const void *)bp >= propend) - break; - fprintf(f, " "); - } - - /* Wrap up any labels at the end of the value */ - for_each_marker_of_type(m, LABEL) { - assert (m->offset == val.len); - fprintf(f, " %s:", m->ref); - } - fprintf(f, "]"); -} - -static void write_propval(FILE *f, struct property *prop) -{ - int len = prop->val.len; - const char *p = prop->val.val; - struct marker *m = prop->val.markers; - int nnotstring = 0, nnul = 0; - int nnotstringlbl = 0, nnotcelllbl = 0; - int i; - - if (len == 0) { - fprintf(f, ";\n"); - return; - } - - for (i = 0; i < len; i++) { - if (! isstring(p[i])) - nnotstring++; - if (p[i] == '\0') - nnul++; - } - - for_each_marker_of_type(m, LABEL) { - if ((m->offset > 0) && (prop->val.val[m->offset - 1] != '\0')) - nnotstringlbl++; - if ((m->offset % sizeof(cell_t)) != 0) - nnotcelllbl++; - } - - fprintf(f, " = "); - if ((p[len-1] == '\0') && (nnotstring == 0) && (nnul < (len-nnul)) - && (nnotstringlbl == 0)) { - write_propval_string(f, prop->val); - } else if (((len % sizeof(cell_t)) == 0) && (nnotcelllbl == 0)) { - write_propval_cells(f, prop->val); - } else { - write_propval_bytes(f, prop->val); - } - - fprintf(f, ";\n"); -} - -static void write_tree_source_node(FILE *f, struct node *tree, int level) -{ - struct property *prop; - struct node *child; - - write_prefix(f, level); - if (tree->label) - fprintf(f, "%s: ", tree->label); - if (tree->name && (*tree->name)) - fprintf(f, "%s {\n", tree->name); - else - fprintf(f, "/ {\n"); - - for_each_property(tree, prop) { - write_prefix(f, level+1); - if (prop->label) - fprintf(f, "%s: ", prop->label); - fprintf(f, "%s", prop->name); - write_propval(f, prop); - } - for_each_child(tree, child) { - fprintf(f, "\n"); - write_tree_source_node(f, child, level+1); - } - write_prefix(f, level); - fprintf(f, "};\n"); -} - - -void dt_to_source(FILE *f, struct boot_info *bi) -{ - struct reserve_info *re; - - fprintf(f, "/dts-v1/;\n\n"); - - for (re = bi->reservelist; re; re = re->next) { - if (re->label) - fprintf(f, "%s: ", re->label); - fprintf(f, "/memreserve/\t0x%016llx 0x%016llx;\n", - (unsigned long long)re->re.address, - (unsigned long long)re->re.size); - } - - write_tree_source_node(f, bi->dt, 0); -} - diff --git a/arch/powerpc/boot/dtc-src/version_gen.h b/arch/powerpc/boot/dtc-src/version_gen.h deleted file mode 100644 index 658ff42429d6..000000000000 --- a/arch/powerpc/boot/dtc-src/version_gen.h +++ /dev/null @@ -1 +0,0 @@ -#define DTC_VERSION "DTC 1.2.0" diff --git a/arch/powerpc/boot/libfdt/Makefile.libfdt b/arch/powerpc/boot/libfdt/Makefile.libfdt deleted file mode 100644 index 6c42acfa21ec..000000000000 --- a/arch/powerpc/boot/libfdt/Makefile.libfdt +++ /dev/null @@ -1,8 +0,0 @@ -# Makefile.libfdt -# -# This is not a complete Makefile of itself. Instead, it is designed to -# be easily embeddable into other systems of Makefiles. -# -LIBFDT_INCLUDES = fdt.h libfdt.h -LIBFDT_SRCS = fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c -LIBFDT_OBJS = $(LIBFDT_SRCS:%.c=%.o) diff --git a/arch/powerpc/boot/libfdt/fdt.c b/arch/powerpc/boot/libfdt/fdt.c deleted file mode 100644 index 2acaec5923ae..000000000000 --- a/arch/powerpc/boot/libfdt/fdt.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include "libfdt_env.h" - -#include -#include - -#include "libfdt_internal.h" - -int fdt_check_header(const void *fdt) -{ - if (fdt_magic(fdt) == FDT_MAGIC) { - /* Complete tree */ - if (fdt_version(fdt) < FDT_FIRST_SUPPORTED_VERSION) - return -FDT_ERR_BADVERSION; - if (fdt_last_comp_version(fdt) > FDT_LAST_SUPPORTED_VERSION) - return -FDT_ERR_BADVERSION; - } else if (fdt_magic(fdt) == FDT_SW_MAGIC) { - /* Unfinished sequential-write blob */ - if (fdt_size_dt_struct(fdt) == 0) - return -FDT_ERR_BADSTATE; - } else { - return -FDT_ERR_BADMAGIC; - } - - return 0; -} - -const void *fdt_offset_ptr(const void *fdt, int offset, int len) -{ - const char *p; - - if (fdt_version(fdt) >= 0x11) - if (((offset + len) < offset) - || ((offset + len) > fdt_size_dt_struct(fdt))) - return NULL; - - p = _fdt_offset_ptr(fdt, offset); - - if (p + len < p) - return NULL; - return p; -} - -uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset) -{ - const uint32_t *tagp, *lenp; - uint32_t tag; - const char *p; - - if (offset % FDT_TAGSIZE) - return -1; - - tagp = fdt_offset_ptr(fdt, offset, FDT_TAGSIZE); - if (! tagp) - return FDT_END; /* premature end */ - tag = fdt32_to_cpu(*tagp); - offset += FDT_TAGSIZE; - - switch (tag) { - case FDT_BEGIN_NODE: - /* skip name */ - do { - p = fdt_offset_ptr(fdt, offset++, 1); - } while (p && (*p != '\0')); - if (! p) - return FDT_END; - break; - case FDT_PROP: - lenp = fdt_offset_ptr(fdt, offset, sizeof(*lenp)); - if (! lenp) - return FDT_END; - /* skip name offset, length and value */ - offset += 2*FDT_TAGSIZE + fdt32_to_cpu(*lenp); - break; - } - - if (nextoffset) - *nextoffset = FDT_TAGALIGN(offset); - - return tag; -} - -int _fdt_check_node_offset(const void *fdt, int offset) -{ - if ((offset < 0) || (offset % FDT_TAGSIZE) - || (fdt_next_tag(fdt, offset, &offset) != FDT_BEGIN_NODE)) - return -FDT_ERR_BADOFFSET; - - return offset; -} - -int fdt_next_node(const void *fdt, int offset, int *depth) -{ - int nextoffset = 0; - uint32_t tag; - - if (offset >= 0) - if ((nextoffset = _fdt_check_node_offset(fdt, offset)) < 0) - return nextoffset; - - do { - offset = nextoffset; - tag = fdt_next_tag(fdt, offset, &nextoffset); - - switch (tag) { - case FDT_PROP: - case FDT_NOP: - break; - - case FDT_BEGIN_NODE: - if (depth) - (*depth)++; - break; - - case FDT_END_NODE: - if (depth) - (*depth)--; - break; - - case FDT_END: - return -FDT_ERR_NOTFOUND; - - default: - return -FDT_ERR_BADSTRUCTURE; - } - } while (tag != FDT_BEGIN_NODE); - - return offset; -} - -const char *_fdt_find_string(const char *strtab, int tabsize, const char *s) -{ - int len = strlen(s) + 1; - const char *last = strtab + tabsize - len; - const char *p; - - for (p = strtab; p <= last; p++) - if (memcmp(p, s, len) == 0) - return p; - return NULL; -} - -int fdt_move(const void *fdt, void *buf, int bufsize) -{ - FDT_CHECK_HEADER(fdt); - - if (fdt_totalsize(fdt) > bufsize) - return -FDT_ERR_NOSPACE; - - memmove(buf, fdt, fdt_totalsize(fdt)); - return 0; -} diff --git a/arch/powerpc/boot/libfdt/fdt.h b/arch/powerpc/boot/libfdt/fdt.h deleted file mode 100644 index 48ccfd910000..000000000000 --- a/arch/powerpc/boot/libfdt/fdt.h +++ /dev/null @@ -1,60 +0,0 @@ -#ifndef _FDT_H -#define _FDT_H - -#ifndef __ASSEMBLY__ - -struct fdt_header { - uint32_t magic; /* magic word FDT_MAGIC */ - uint32_t totalsize; /* total size of DT block */ - uint32_t off_dt_struct; /* offset to structure */ - uint32_t off_dt_strings; /* offset to strings */ - uint32_t off_mem_rsvmap; /* offset to memory reserve map */ - uint32_t version; /* format version */ - uint32_t last_comp_version; /* last compatible version */ - - /* version 2 fields below */ - uint32_t boot_cpuid_phys; /* Which physical CPU id we're - booting on */ - /* version 3 fields below */ - uint32_t size_dt_strings; /* size of the strings block */ - - /* version 17 fields below */ - uint32_t size_dt_struct; /* size of the structure block */ -}; - -struct fdt_reserve_entry { - uint64_t address; - uint64_t size; -}; - -struct fdt_node_header { - uint32_t tag; - char name[0]; -}; - -struct fdt_property { - uint32_t tag; - uint32_t len; - uint32_t nameoff; - char data[0]; -}; - -#endif /* !__ASSEMBLY */ - -#define FDT_MAGIC 0xd00dfeed /* 4: version, 4: total size */ -#define FDT_TAGSIZE sizeof(uint32_t) - -#define FDT_BEGIN_NODE 0x1 /* Start node: full name */ -#define FDT_END_NODE 0x2 /* End node */ -#define FDT_PROP 0x3 /* Property: name off, - size, content */ -#define FDT_NOP 0x4 /* nop */ -#define FDT_END 0x9 - -#define FDT_V1_SIZE (7*sizeof(uint32_t)) -#define FDT_V2_SIZE (FDT_V1_SIZE + sizeof(uint32_t)) -#define FDT_V3_SIZE (FDT_V2_SIZE + sizeof(uint32_t)) -#define FDT_V16_SIZE FDT_V3_SIZE -#define FDT_V17_SIZE (FDT_V16_SIZE + sizeof(uint32_t)) - -#endif /* _FDT_H */ diff --git a/arch/powerpc/boot/libfdt/fdt_ro.c b/arch/powerpc/boot/libfdt/fdt_ro.c deleted file mode 100644 index fbbba44fcd0d..000000000000 --- a/arch/powerpc/boot/libfdt/fdt_ro.c +++ /dev/null @@ -1,469 +0,0 @@ -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include "libfdt_env.h" - -#include -#include - -#include "libfdt_internal.h" - -static int _fdt_nodename_eq(const void *fdt, int offset, - const char *s, int len) -{ - const char *p = fdt_offset_ptr(fdt, offset + FDT_TAGSIZE, len+1); - - if (! p) - /* short match */ - return 0; - - if (memcmp(p, s, len) != 0) - return 0; - - if (p[len] == '\0') - return 1; - else if (!memchr(s, '@', len) && (p[len] == '@')) - return 1; - else - return 0; -} - -const char *fdt_string(const void *fdt, int stroffset) -{ - return (const char *)fdt + fdt_off_dt_strings(fdt) + stroffset; -} - -int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size) -{ - FDT_CHECK_HEADER(fdt); - *address = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->address); - *size = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->size); - return 0; -} - -int fdt_num_mem_rsv(const void *fdt) -{ - int i = 0; - - while (fdt64_to_cpu(_fdt_mem_rsv(fdt, i)->size) != 0) - i++; - return i; -} - -int fdt_subnode_offset_namelen(const void *fdt, int offset, - const char *name, int namelen) -{ - int depth; - - FDT_CHECK_HEADER(fdt); - - for (depth = 0, offset = fdt_next_node(fdt, offset, &depth); - (offset >= 0) && (depth > 0); - offset = fdt_next_node(fdt, offset, &depth)) { - if (depth < 0) - return -FDT_ERR_NOTFOUND; - else if ((depth == 1) - && _fdt_nodename_eq(fdt, offset, name, namelen)) - return offset; - } - - if (offset < 0) - return offset; /* error */ - else - return -FDT_ERR_NOTFOUND; -} - -int fdt_subnode_offset(const void *fdt, int parentoffset, - const char *name) -{ - return fdt_subnode_offset_namelen(fdt, parentoffset, name, strlen(name)); -} - -int fdt_path_offset(const void *fdt, const char *path) -{ - const char *end = path + strlen(path); - const char *p = path; - int offset = 0; - - FDT_CHECK_HEADER(fdt); - - if (*path != '/') - return -FDT_ERR_BADPATH; - - while (*p) { - const char *q; - - while (*p == '/') - p++; - if (! *p) - return offset; - q = strchr(p, '/'); - if (! q) - q = end; - - offset = fdt_subnode_offset_namelen(fdt, offset, p, q-p); - if (offset < 0) - return offset; - - p = q; - } - - return offset; -} - -const char *fdt_get_name(const void *fdt, int nodeoffset, int *len) -{ - const struct fdt_node_header *nh = _fdt_offset_ptr(fdt, nodeoffset); - int err; - - if (((err = fdt_check_header(fdt)) != 0) - || ((err = _fdt_check_node_offset(fdt, nodeoffset)) < 0)) - goto fail; - - if (len) - *len = strlen(nh->name); - - return nh->name; - - fail: - if (len) - *len = err; - return NULL; -} - -const struct fdt_property *fdt_get_property(const void *fdt, - int nodeoffset, - const char *name, int *lenp) -{ - uint32_t tag; - const struct fdt_property *prop; - int namestroff; - int offset, nextoffset; - int err; - - if (((err = fdt_check_header(fdt)) != 0) - || ((err = _fdt_check_node_offset(fdt, nodeoffset)) < 0)) - goto fail; - - nextoffset = err; - do { - offset = nextoffset; - - tag = fdt_next_tag(fdt, offset, &nextoffset); - switch (tag) { - case FDT_END: - err = -FDT_ERR_TRUNCATED; - goto fail; - - case FDT_BEGIN_NODE: - case FDT_END_NODE: - case FDT_NOP: - break; - - case FDT_PROP: - err = -FDT_ERR_BADSTRUCTURE; - prop = fdt_offset_ptr(fdt, offset, sizeof(*prop)); - if (! prop) - goto fail; - namestroff = fdt32_to_cpu(prop->nameoff); - if (strcmp(fdt_string(fdt, namestroff), name) == 0) { - /* Found it! */ - int len = fdt32_to_cpu(prop->len); - prop = fdt_offset_ptr(fdt, offset, - sizeof(*prop)+len); - if (! prop) - goto fail; - - if (lenp) - *lenp = len; - - return prop; - } - break; - - default: - err = -FDT_ERR_BADSTRUCTURE; - goto fail; - } - } while ((tag != FDT_BEGIN_NODE) && (tag != FDT_END_NODE)); - - err = -FDT_ERR_NOTFOUND; - fail: - if (lenp) - *lenp = err; - return NULL; -} - -const void *fdt_getprop(const void *fdt, int nodeoffset, - const char *name, int *lenp) -{ - const struct fdt_property *prop; - - prop = fdt_get_property(fdt, nodeoffset, name, lenp); - if (! prop) - return NULL; - - return prop->data; -} - -uint32_t fdt_get_phandle(const void *fdt, int nodeoffset) -{ - const uint32_t *php; - int len; - - php = fdt_getprop(fdt, nodeoffset, "linux,phandle", &len); - if (!php || (len != sizeof(*php))) - return 0; - - return fdt32_to_cpu(*php); -} - -int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen) -{ - int pdepth = 0, p = 0; - int offset, depth, namelen; - const char *name; - - FDT_CHECK_HEADER(fdt); - - if (buflen < 2) - return -FDT_ERR_NOSPACE; - - for (offset = 0, depth = 0; - (offset >= 0) && (offset <= nodeoffset); - offset = fdt_next_node(fdt, offset, &depth)) { - if (pdepth < depth) - continue; /* overflowed buffer */ - - while (pdepth > depth) { - do { - p--; - } while (buf[p-1] != '/'); - pdepth--; - } - - name = fdt_get_name(fdt, offset, &namelen); - if (!name) - return namelen; - if ((p + namelen + 1) <= buflen) { - memcpy(buf + p, name, namelen); - p += namelen; - buf[p++] = '/'; - pdepth++; - } - - if (offset == nodeoffset) { - if (pdepth < (depth + 1)) - return -FDT_ERR_NOSPACE; - - if (p > 1) /* special case so that root path is "/", not "" */ - p--; - buf[p] = '\0'; - return p; - } - } - - if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0)) - return -FDT_ERR_BADOFFSET; - else if (offset == -FDT_ERR_BADOFFSET) - return -FDT_ERR_BADSTRUCTURE; - - return offset; /* error from fdt_next_node() */ -} - -int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset, - int supernodedepth, int *nodedepth) -{ - int offset, depth; - int supernodeoffset = -FDT_ERR_INTERNAL; - - FDT_CHECK_HEADER(fdt); - - if (supernodedepth < 0) - return -FDT_ERR_NOTFOUND; - - for (offset = 0, depth = 0; - (offset >= 0) && (offset <= nodeoffset); - offset = fdt_next_node(fdt, offset, &depth)) { - if (depth == supernodedepth) - supernodeoffset = offset; - - if (offset == nodeoffset) { - if (nodedepth) - *nodedepth = depth; - - if (supernodedepth > depth) - return -FDT_ERR_NOTFOUND; - else - return supernodeoffset; - } - } - - if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0)) - return -FDT_ERR_BADOFFSET; - else if (offset == -FDT_ERR_BADOFFSET) - return -FDT_ERR_BADSTRUCTURE; - - return offset; /* error from fdt_next_node() */ -} - -int fdt_node_depth(const void *fdt, int nodeoffset) -{ - int nodedepth; - int err; - - err = fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, &nodedepth); - if (err) - return (err < 0) ? err : -FDT_ERR_INTERNAL; - return nodedepth; -} - -int fdt_parent_offset(const void *fdt, int nodeoffset) -{ - int nodedepth = fdt_node_depth(fdt, nodeoffset); - - if (nodedepth < 0) - return nodedepth; - return fdt_supernode_atdepth_offset(fdt, nodeoffset, - nodedepth - 1, NULL); -} - -int fdt_node_offset_by_prop_value(const void *fdt, int startoffset, - const char *propname, - const void *propval, int proplen) -{ - int offset; - const void *val; - int len; - - FDT_CHECK_HEADER(fdt); - - /* FIXME: The algorithm here is pretty horrible: we scan each - * property of a node in fdt_getprop(), then if that didn't - * find what we want, we scan over them again making our way - * to the next node. Still it's the easiest to implement - * approach; performance can come later. */ - for (offset = fdt_next_node(fdt, startoffset, NULL); - offset >= 0; - offset = fdt_next_node(fdt, offset, NULL)) { - val = fdt_getprop(fdt, offset, propname, &len); - if (val && (len == proplen) - && (memcmp(val, propval, len) == 0)) - return offset; - } - - return offset; /* error from fdt_next_node() */ -} - -int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle) -{ - if ((phandle == 0) || (phandle == -1)) - return -FDT_ERR_BADPHANDLE; - phandle = cpu_to_fdt32(phandle); - return fdt_node_offset_by_prop_value(fdt, -1, "linux,phandle", - &phandle, sizeof(phandle)); -} - -int _stringlist_contains(const char *strlist, int listlen, const char *str) -{ - int len = strlen(str); - const char *p; - - while (listlen >= len) { - if (memcmp(str, strlist, len+1) == 0) - return 1; - p = memchr(strlist, '\0', listlen); - if (!p) - return 0; /* malformed strlist.. */ - listlen -= (p-strlist) + 1; - strlist = p + 1; - } - return 0; -} - -int fdt_node_check_compatible(const void *fdt, int nodeoffset, - const char *compatible) -{ - const void *prop; - int len; - - prop = fdt_getprop(fdt, nodeoffset, "compatible", &len); - if (!prop) - return len; - if (_stringlist_contains(prop, len, compatible)) - return 0; - else - return 1; -} - -int fdt_node_offset_by_compatible(const void *fdt, int startoffset, - const char *compatible) -{ - int offset, err; - - FDT_CHECK_HEADER(fdt); - - /* FIXME: The algorithm here is pretty horrible: we scan each - * property of a node in fdt_node_check_compatible(), then if - * that didn't find what we want, we scan over them again - * making our way to the next node. Still it's the easiest to - * implement approach; performance can come later. */ - for (offset = fdt_next_node(fdt, startoffset, NULL); - offset >= 0; - offset = fdt_next_node(fdt, offset, NULL)) { - err = fdt_node_check_compatible(fdt, offset, compatible); - if ((err < 0) && (err != -FDT_ERR_NOTFOUND)) - return err; - else if (err == 0) - return offset; - } - - return offset; /* error from fdt_next_node() */ -} diff --git a/arch/powerpc/boot/libfdt/fdt_rw.c b/arch/powerpc/boot/libfdt/fdt_rw.c deleted file mode 100644 index 8e7ec4cb7bcd..000000000000 --- a/arch/powerpc/boot/libfdt/fdt_rw.c +++ /dev/null @@ -1,463 +0,0 @@ -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include "libfdt_env.h" - -#include -#include - -#include "libfdt_internal.h" - -static int _fdt_blocks_misordered(const void *fdt, - int mem_rsv_size, int struct_size) -{ - return (fdt_off_mem_rsvmap(fdt) < FDT_ALIGN(sizeof(struct fdt_header), 8)) - || (fdt_off_dt_struct(fdt) < - (fdt_off_mem_rsvmap(fdt) + mem_rsv_size)) - || (fdt_off_dt_strings(fdt) < - (fdt_off_dt_struct(fdt) + struct_size)) - || (fdt_totalsize(fdt) < - (fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt))); -} - -static int _fdt_rw_check_header(void *fdt) -{ - FDT_CHECK_HEADER(fdt); - - if (fdt_version(fdt) < 17) - return -FDT_ERR_BADVERSION; - if (_fdt_blocks_misordered(fdt, sizeof(struct fdt_reserve_entry), - fdt_size_dt_struct(fdt))) - return -FDT_ERR_BADLAYOUT; - if (fdt_version(fdt) > 17) - fdt_set_version(fdt, 17); - - return 0; -} - -#define FDT_RW_CHECK_HEADER(fdt) \ - { \ - int err; \ - if ((err = _fdt_rw_check_header(fdt)) != 0) \ - return err; \ - } - -static inline int _fdt_data_size(void *fdt) -{ - return fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt); -} - -static int _fdt_splice(void *fdt, void *splicepoint, int oldlen, int newlen) -{ - char *p = splicepoint; - char *end = (char *)fdt + _fdt_data_size(fdt); - - if (((p + oldlen) < p) || ((p + oldlen) > end)) - return -FDT_ERR_BADOFFSET; - if ((end - oldlen + newlen) > ((char *)fdt + fdt_totalsize(fdt))) - return -FDT_ERR_NOSPACE; - memmove(p + newlen, p + oldlen, end - p - oldlen); - return 0; -} - -static int _fdt_splice_mem_rsv(void *fdt, struct fdt_reserve_entry *p, - int oldn, int newn) -{ - int delta = (newn - oldn) * sizeof(*p); - int err; - err = _fdt_splice(fdt, p, oldn * sizeof(*p), newn * sizeof(*p)); - if (err) - return err; - fdt_set_off_dt_struct(fdt, fdt_off_dt_struct(fdt) + delta); - fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta); - return 0; -} - -static int _fdt_splice_struct(void *fdt, void *p, - int oldlen, int newlen) -{ - int delta = newlen - oldlen; - int err; - - if ((err = _fdt_splice(fdt, p, oldlen, newlen))) - return err; - - fdt_set_size_dt_struct(fdt, fdt_size_dt_struct(fdt) + delta); - fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta); - return 0; -} - -static int _fdt_splice_string(void *fdt, int newlen) -{ - void *p = (char *)fdt - + fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt); - int err; - - if ((err = _fdt_splice(fdt, p, 0, newlen))) - return err; - - fdt_set_size_dt_strings(fdt, fdt_size_dt_strings(fdt) + newlen); - return 0; -} - -static int _fdt_find_add_string(void *fdt, const char *s) -{ - char *strtab = (char *)fdt + fdt_off_dt_strings(fdt); - const char *p; - char *new; - int len = strlen(s) + 1; - int err; - - p = _fdt_find_string(strtab, fdt_size_dt_strings(fdt), s); - if (p) - /* found it */ - return (p - strtab); - - new = strtab + fdt_size_dt_strings(fdt); - err = _fdt_splice_string(fdt, len); - if (err) - return err; - - memcpy(new, s, len); - return (new - strtab); -} - -int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size) -{ - struct fdt_reserve_entry *re; - int err; - - FDT_RW_CHECK_HEADER(fdt); - - re = _fdt_mem_rsv_w(fdt, fdt_num_mem_rsv(fdt)); - err = _fdt_splice_mem_rsv(fdt, re, 0, 1); - if (err) - return err; - - re->address = cpu_to_fdt64(address); - re->size = cpu_to_fdt64(size); - return 0; -} - -int fdt_del_mem_rsv(void *fdt, int n) -{ - struct fdt_reserve_entry *re = _fdt_mem_rsv_w(fdt, n); - int err; - - FDT_RW_CHECK_HEADER(fdt); - - if (n >= fdt_num_mem_rsv(fdt)) - return -FDT_ERR_NOTFOUND; - - err = _fdt_splice_mem_rsv(fdt, re, 1, 0); - if (err) - return err; - return 0; -} - -static int _fdt_resize_property(void *fdt, int nodeoffset, const char *name, - int len, struct fdt_property **prop) -{ - int oldlen; - int err; - - *prop = fdt_get_property_w(fdt, nodeoffset, name, &oldlen); - if (! (*prop)) - return oldlen; - - if ((err = _fdt_splice_struct(fdt, (*prop)->data, FDT_TAGALIGN(oldlen), - FDT_TAGALIGN(len)))) - return err; - - (*prop)->len = cpu_to_fdt32(len); - return 0; -} - -static int _fdt_add_property(void *fdt, int nodeoffset, const char *name, - int len, struct fdt_property **prop) -{ - int proplen; - int nextoffset; - int namestroff; - int err; - - if ((nextoffset = _fdt_check_node_offset(fdt, nodeoffset)) < 0) - return nextoffset; - - namestroff = _fdt_find_add_string(fdt, name); - if (namestroff < 0) - return namestroff; - - *prop = _fdt_offset_ptr_w(fdt, nextoffset); - proplen = sizeof(**prop) + FDT_TAGALIGN(len); - - err = _fdt_splice_struct(fdt, *prop, 0, proplen); - if (err) - return err; - - (*prop)->tag = cpu_to_fdt32(FDT_PROP); - (*prop)->nameoff = cpu_to_fdt32(namestroff); - (*prop)->len = cpu_to_fdt32(len); - return 0; -} - -int fdt_set_name(void *fdt, int nodeoffset, const char *name) -{ - char *namep; - int oldlen, newlen; - int err; - - FDT_RW_CHECK_HEADER(fdt); - - namep = (char *)(uintptr_t)fdt_get_name(fdt, nodeoffset, &oldlen); - if (!namep) - return oldlen; - - newlen = strlen(name); - - err = _fdt_splice_struct(fdt, namep, FDT_TAGALIGN(oldlen+1), - FDT_TAGALIGN(newlen+1)); - if (err) - return err; - - memcpy(namep, name, newlen+1); - return 0; -} - -int fdt_setprop(void *fdt, int nodeoffset, const char *name, - const void *val, int len) -{ - struct fdt_property *prop; - int err; - - FDT_RW_CHECK_HEADER(fdt); - - err = _fdt_resize_property(fdt, nodeoffset, name, len, &prop); - if (err == -FDT_ERR_NOTFOUND) - err = _fdt_add_property(fdt, nodeoffset, name, len, &prop); - if (err) - return err; - - memcpy(prop->data, val, len); - return 0; -} - -int fdt_delprop(void *fdt, int nodeoffset, const char *name) -{ - struct fdt_property *prop; - int len, proplen; - - FDT_RW_CHECK_HEADER(fdt); - - prop = fdt_get_property_w(fdt, nodeoffset, name, &len); - if (! prop) - return len; - - proplen = sizeof(*prop) + FDT_TAGALIGN(len); - return _fdt_splice_struct(fdt, prop, proplen, 0); -} - -int fdt_add_subnode_namelen(void *fdt, int parentoffset, - const char *name, int namelen) -{ - struct fdt_node_header *nh; - int offset, nextoffset; - int nodelen; - int err; - uint32_t tag; - uint32_t *endtag; - - FDT_RW_CHECK_HEADER(fdt); - - offset = fdt_subnode_offset_namelen(fdt, parentoffset, name, namelen); - if (offset >= 0) - return -FDT_ERR_EXISTS; - else if (offset != -FDT_ERR_NOTFOUND) - return offset; - - /* Try to place the new node after the parent's properties */ - fdt_next_tag(fdt, parentoffset, &nextoffset); /* skip the BEGIN_NODE */ - do { - offset = nextoffset; - tag = fdt_next_tag(fdt, offset, &nextoffset); - } while ((tag == FDT_PROP) || (tag == FDT_NOP)); - - nh = _fdt_offset_ptr_w(fdt, offset); - nodelen = sizeof(*nh) + FDT_TAGALIGN(namelen+1) + FDT_TAGSIZE; - - err = _fdt_splice_struct(fdt, nh, 0, nodelen); - if (err) - return err; - - nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE); - memset(nh->name, 0, FDT_TAGALIGN(namelen+1)); - memcpy(nh->name, name, namelen); - endtag = (uint32_t *)((char *)nh + nodelen - FDT_TAGSIZE); - *endtag = cpu_to_fdt32(FDT_END_NODE); - - return offset; -} - -int fdt_add_subnode(void *fdt, int parentoffset, const char *name) -{ - return fdt_add_subnode_namelen(fdt, parentoffset, name, strlen(name)); -} - -int fdt_del_node(void *fdt, int nodeoffset) -{ - int endoffset; - - FDT_RW_CHECK_HEADER(fdt); - - endoffset = _fdt_node_end_offset(fdt, nodeoffset); - if (endoffset < 0) - return endoffset; - - return _fdt_splice_struct(fdt, _fdt_offset_ptr_w(fdt, nodeoffset), - endoffset - nodeoffset, 0); -} - -static void _fdt_packblocks(const char *old, char *new, - int mem_rsv_size, int struct_size) -{ - int mem_rsv_off, struct_off, strings_off; - - mem_rsv_off = FDT_ALIGN(sizeof(struct fdt_header), 8); - struct_off = mem_rsv_off + mem_rsv_size; - strings_off = struct_off + struct_size; - - memmove(new + mem_rsv_off, old + fdt_off_mem_rsvmap(old), mem_rsv_size); - fdt_set_off_mem_rsvmap(new, mem_rsv_off); - - memmove(new + struct_off, old + fdt_off_dt_struct(old), struct_size); - fdt_set_off_dt_struct(new, struct_off); - fdt_set_size_dt_struct(new, struct_size); - - memmove(new + strings_off, old + fdt_off_dt_strings(old), - fdt_size_dt_strings(old)); - fdt_set_off_dt_strings(new, strings_off); - fdt_set_size_dt_strings(new, fdt_size_dt_strings(old)); -} - -int fdt_open_into(const void *fdt, void *buf, int bufsize) -{ - int err; - int mem_rsv_size, struct_size; - int newsize; - const char *fdtstart = fdt; - const char *fdtend = fdtstart + fdt_totalsize(fdt); - char *tmp; - - FDT_CHECK_HEADER(fdt); - - mem_rsv_size = (fdt_num_mem_rsv(fdt)+1) - * sizeof(struct fdt_reserve_entry); - - if (fdt_version(fdt) >= 17) { - struct_size = fdt_size_dt_struct(fdt); - } else { - struct_size = 0; - while (fdt_next_tag(fdt, struct_size, &struct_size) != FDT_END) - ; - } - - if (!_fdt_blocks_misordered(fdt, mem_rsv_size, struct_size)) { - /* no further work necessary */ - err = fdt_move(fdt, buf, bufsize); - if (err) - return err; - fdt_set_version(buf, 17); - fdt_set_size_dt_struct(buf, struct_size); - fdt_set_totalsize(buf, bufsize); - return 0; - } - - /* Need to reorder */ - newsize = FDT_ALIGN(sizeof(struct fdt_header), 8) + mem_rsv_size - + struct_size + fdt_size_dt_strings(fdt); - - if (bufsize < newsize) - return -FDT_ERR_NOSPACE; - - /* First attempt to build converted tree at beginning of buffer */ - tmp = buf; - /* But if that overlaps with the old tree... */ - if (((tmp + newsize) > fdtstart) && (tmp < fdtend)) { - /* Try right after the old tree instead */ - tmp = (char *)(uintptr_t)fdtend; - if ((tmp + newsize) > ((char *)buf + bufsize)) - return -FDT_ERR_NOSPACE; - } - - _fdt_packblocks(fdt, tmp, mem_rsv_size, struct_size); - memmove(buf, tmp, newsize); - - fdt_set_magic(buf, FDT_MAGIC); - fdt_set_totalsize(buf, bufsize); - fdt_set_version(buf, 17); - fdt_set_last_comp_version(buf, 16); - fdt_set_boot_cpuid_phys(buf, fdt_boot_cpuid_phys(fdt)); - - return 0; -} - -int fdt_pack(void *fdt) -{ - int mem_rsv_size; - - FDT_RW_CHECK_HEADER(fdt); - - mem_rsv_size = (fdt_num_mem_rsv(fdt)+1) - * sizeof(struct fdt_reserve_entry); - _fdt_packblocks(fdt, fdt, mem_rsv_size, fdt_size_dt_struct(fdt)); - fdt_set_totalsize(fdt, _fdt_data_size(fdt)); - - return 0; -} diff --git a/arch/powerpc/boot/libfdt/fdt_strerror.c b/arch/powerpc/boot/libfdt/fdt_strerror.c deleted file mode 100644 index e6c3ceee8c58..000000000000 --- a/arch/powerpc/boot/libfdt/fdt_strerror.c +++ /dev/null @@ -1,96 +0,0 @@ -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include "libfdt_env.h" - -#include -#include - -#include "libfdt_internal.h" - -struct fdt_errtabent { - const char *str; -}; - -#define FDT_ERRTABENT(val) \ - [(val)] = { .str = #val, } - -static struct fdt_errtabent fdt_errtable[] = { - FDT_ERRTABENT(FDT_ERR_NOTFOUND), - FDT_ERRTABENT(FDT_ERR_EXISTS), - FDT_ERRTABENT(FDT_ERR_NOSPACE), - - FDT_ERRTABENT(FDT_ERR_BADOFFSET), - FDT_ERRTABENT(FDT_ERR_BADPATH), - FDT_ERRTABENT(FDT_ERR_BADSTATE), - - FDT_ERRTABENT(FDT_ERR_TRUNCATED), - FDT_ERRTABENT(FDT_ERR_BADMAGIC), - FDT_ERRTABENT(FDT_ERR_BADVERSION), - FDT_ERRTABENT(FDT_ERR_BADSTRUCTURE), - FDT_ERRTABENT(FDT_ERR_BADLAYOUT), -}; -#define FDT_ERRTABSIZE (sizeof(fdt_errtable) / sizeof(fdt_errtable[0])) - -const char *fdt_strerror(int errval) -{ - if (errval > 0) - return ""; - else if (errval == 0) - return ""; - else if (errval > -FDT_ERRTABSIZE) { - const char *s = fdt_errtable[-errval].str; - - if (s) - return s; - } - - return ""; -} diff --git a/arch/powerpc/boot/libfdt/fdt_sw.c b/arch/powerpc/boot/libfdt/fdt_sw.c deleted file mode 100644 index 698329e0ccaf..000000000000 --- a/arch/powerpc/boot/libfdt/fdt_sw.c +++ /dev/null @@ -1,257 +0,0 @@ -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include "libfdt_env.h" - -#include -#include - -#include "libfdt_internal.h" - -static int _fdt_sw_check_header(void *fdt) -{ - if (fdt_magic(fdt) != FDT_SW_MAGIC) - return -FDT_ERR_BADMAGIC; - /* FIXME: should check more details about the header state */ - return 0; -} - -#define FDT_SW_CHECK_HEADER(fdt) \ - { \ - int err; \ - if ((err = _fdt_sw_check_header(fdt)) != 0) \ - return err; \ - } - -static void *_fdt_grab_space(void *fdt, int len) -{ - int offset = fdt_size_dt_struct(fdt); - int spaceleft; - - spaceleft = fdt_totalsize(fdt) - fdt_off_dt_struct(fdt) - - fdt_size_dt_strings(fdt); - - if ((offset + len < offset) || (offset + len > spaceleft)) - return NULL; - - fdt_set_size_dt_struct(fdt, offset + len); - return fdt_offset_ptr_w(fdt, offset, len); -} - -int fdt_create(void *buf, int bufsize) -{ - void *fdt = buf; - - if (bufsize < sizeof(struct fdt_header)) - return -FDT_ERR_NOSPACE; - - memset(buf, 0, bufsize); - - fdt_set_magic(fdt, FDT_SW_MAGIC); - fdt_set_version(fdt, FDT_LAST_SUPPORTED_VERSION); - fdt_set_last_comp_version(fdt, FDT_FIRST_SUPPORTED_VERSION); - fdt_set_totalsize(fdt, bufsize); - - fdt_set_off_mem_rsvmap(fdt, FDT_ALIGN(sizeof(struct fdt_header), - sizeof(struct fdt_reserve_entry))); - fdt_set_off_dt_struct(fdt, fdt_off_mem_rsvmap(fdt)); - fdt_set_off_dt_strings(fdt, bufsize); - - return 0; -} - -int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size) -{ - struct fdt_reserve_entry *re; - int offset; - - FDT_SW_CHECK_HEADER(fdt); - - if (fdt_size_dt_struct(fdt)) - return -FDT_ERR_BADSTATE; - - offset = fdt_off_dt_struct(fdt); - if ((offset + sizeof(*re)) > fdt_totalsize(fdt)) - return -FDT_ERR_NOSPACE; - - re = (struct fdt_reserve_entry *)((char *)fdt + offset); - re->address = cpu_to_fdt64(addr); - re->size = cpu_to_fdt64(size); - - fdt_set_off_dt_struct(fdt, offset + sizeof(*re)); - - return 0; -} - -int fdt_finish_reservemap(void *fdt) -{ - return fdt_add_reservemap_entry(fdt, 0, 0); -} - -int fdt_begin_node(void *fdt, const char *name) -{ - struct fdt_node_header *nh; - int namelen = strlen(name) + 1; - - FDT_SW_CHECK_HEADER(fdt); - - nh = _fdt_grab_space(fdt, sizeof(*nh) + FDT_TAGALIGN(namelen)); - if (! nh) - return -FDT_ERR_NOSPACE; - - nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE); - memcpy(nh->name, name, namelen); - return 0; -} - -int fdt_end_node(void *fdt) -{ - uint32_t *en; - - FDT_SW_CHECK_HEADER(fdt); - - en = _fdt_grab_space(fdt, FDT_TAGSIZE); - if (! en) - return -FDT_ERR_NOSPACE; - - *en = cpu_to_fdt32(FDT_END_NODE); - return 0; -} - -static int _fdt_find_add_string(void *fdt, const char *s) -{ - char *strtab = (char *)fdt + fdt_totalsize(fdt); - const char *p; - int strtabsize = fdt_size_dt_strings(fdt); - int len = strlen(s) + 1; - int struct_top, offset; - - p = _fdt_find_string(strtab - strtabsize, strtabsize, s); - if (p) - return p - strtab; - - /* Add it */ - offset = -strtabsize - len; - struct_top = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt); - if (fdt_totalsize(fdt) + offset < struct_top) - return 0; /* no more room :( */ - - memcpy(strtab + offset, s, len); - fdt_set_size_dt_strings(fdt, strtabsize + len); - return offset; -} - -int fdt_property(void *fdt, const char *name, const void *val, int len) -{ - struct fdt_property *prop; - int nameoff; - - FDT_SW_CHECK_HEADER(fdt); - - nameoff = _fdt_find_add_string(fdt, name); - if (nameoff == 0) - return -FDT_ERR_NOSPACE; - - prop = _fdt_grab_space(fdt, sizeof(*prop) + FDT_TAGALIGN(len)); - if (! prop) - return -FDT_ERR_NOSPACE; - - prop->tag = cpu_to_fdt32(FDT_PROP); - prop->nameoff = cpu_to_fdt32(nameoff); - prop->len = cpu_to_fdt32(len); - memcpy(prop->data, val, len); - return 0; -} - -int fdt_finish(void *fdt) -{ - char *p = (char *)fdt; - uint32_t *end; - int oldstroffset, newstroffset; - uint32_t tag; - int offset, nextoffset; - - FDT_SW_CHECK_HEADER(fdt); - - /* Add terminator */ - end = _fdt_grab_space(fdt, sizeof(*end)); - if (! end) - return -FDT_ERR_NOSPACE; - *end = cpu_to_fdt32(FDT_END); - - /* Relocate the string table */ - oldstroffset = fdt_totalsize(fdt) - fdt_size_dt_strings(fdt); - newstroffset = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt); - memmove(p + newstroffset, p + oldstroffset, fdt_size_dt_strings(fdt)); - fdt_set_off_dt_strings(fdt, newstroffset); - - /* Walk the structure, correcting string offsets */ - offset = 0; - while ((tag = fdt_next_tag(fdt, offset, &nextoffset)) != FDT_END) { - if (tag == FDT_PROP) { - struct fdt_property *prop = - fdt_offset_ptr_w(fdt, offset, sizeof(*prop)); - int nameoff; - - if (! prop) - return -FDT_ERR_BADSTRUCTURE; - - nameoff = fdt32_to_cpu(prop->nameoff); - nameoff += fdt_size_dt_strings(fdt); - prop->nameoff = cpu_to_fdt32(nameoff); - } - offset = nextoffset; - } - - /* Finally, adjust the header */ - fdt_set_totalsize(fdt, newstroffset + fdt_size_dt_strings(fdt)); - fdt_set_magic(fdt, FDT_MAGIC); - return 0; -} diff --git a/arch/powerpc/boot/libfdt/fdt_wip.c b/arch/powerpc/boot/libfdt/fdt_wip.c deleted file mode 100644 index a4652c6e787e..000000000000 --- a/arch/powerpc/boot/libfdt/fdt_wip.c +++ /dev/null @@ -1,145 +0,0 @@ -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include "libfdt_env.h" - -#include -#include - -#include "libfdt_internal.h" - -int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, - const void *val, int len) -{ - void *propval; - int proplen; - - propval = fdt_getprop_w(fdt, nodeoffset, name, &proplen); - if (! propval) - return proplen; - - if (proplen != len) - return -FDT_ERR_NOSPACE; - - memcpy(propval, val, len); - return 0; -} - -static void _fdt_nop_region(void *start, int len) -{ - uint32_t *p; - - for (p = start; (char *)p < ((char *)start + len); p++) - *p = cpu_to_fdt32(FDT_NOP); -} - -int fdt_nop_property(void *fdt, int nodeoffset, const char *name) -{ - struct fdt_property *prop; - int len; - - prop = fdt_get_property_w(fdt, nodeoffset, name, &len); - if (! prop) - return len; - - _fdt_nop_region(prop, len + sizeof(*prop)); - - return 0; -} - -int _fdt_node_end_offset(void *fdt, int nodeoffset) -{ - int level = 0; - uint32_t tag; - int offset, nextoffset; - - tag = fdt_next_tag(fdt, nodeoffset, &nextoffset); - if (tag != FDT_BEGIN_NODE) - return -FDT_ERR_BADOFFSET; - do { - offset = nextoffset; - tag = fdt_next_tag(fdt, offset, &nextoffset); - - switch (tag) { - case FDT_END: - return offset; - - case FDT_BEGIN_NODE: - level++; - break; - - case FDT_END_NODE: - level--; - break; - - case FDT_PROP: - case FDT_NOP: - break; - - default: - return -FDT_ERR_BADSTRUCTURE; - } - } while (level >= 0); - - return nextoffset; -} - -int fdt_nop_node(void *fdt, int nodeoffset) -{ - int endoffset; - - endoffset = _fdt_node_end_offset(fdt, nodeoffset); - if (endoffset < 0) - return endoffset; - - _fdt_nop_region(fdt_offset_ptr_w(fdt, nodeoffset, 0), - endoffset - nodeoffset); - return 0; -} diff --git a/arch/powerpc/boot/libfdt/libfdt.h b/arch/powerpc/boot/libfdt/libfdt.h deleted file mode 100644 index ce80e4fb41b2..000000000000 --- a/arch/powerpc/boot/libfdt/libfdt.h +++ /dev/null @@ -1,1076 +0,0 @@ -#ifndef _LIBFDT_H -#define _LIBFDT_H -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include -#include - -#define FDT_FIRST_SUPPORTED_VERSION 0x10 -#define FDT_LAST_SUPPORTED_VERSION 0x11 - -/* Error codes: informative error codes */ -#define FDT_ERR_NOTFOUND 1 - /* FDT_ERR_NOTFOUND: The requested node or property does not exist */ -#define FDT_ERR_EXISTS 2 - /* FDT_ERR_EXISTS: Attemped to create a node or property which - * already exists */ -#define FDT_ERR_NOSPACE 3 - /* FDT_ERR_NOSPACE: Operation needed to expand the device - * tree, but its buffer did not have sufficient space to - * contain the expanded tree. Use fdt_open_into() to move the - * device tree to a buffer with more space. */ - -/* Error codes: codes for bad parameters */ -#define FDT_ERR_BADOFFSET 4 - /* FDT_ERR_BADOFFSET: Function was passed a structure block - * offset which is out-of-bounds, or which points to an - * unsuitable part of the structure for the operation. */ -#define FDT_ERR_BADPATH 5 - /* FDT_ERR_BADPATH: Function was passed a badly formatted path - * (e.g. missing a leading / for a function which requires an - * absolute path) */ -#define FDT_ERR_BADPHANDLE 6 - /* FDT_ERR_BADPHANDLE: Function was passed an invalid phandle - * value. phandle values of 0 and -1 are not permitted. */ -#define FDT_ERR_BADSTATE 7 - /* FDT_ERR_BADSTATE: Function was passed an incomplete device - * tree created by the sequential-write functions, which is - * not sufficiently complete for the requested operation. */ - -/* Error codes: codes for bad device tree blobs */ -#define FDT_ERR_TRUNCATED 8 - /* FDT_ERR_TRUNCATED: Structure block of the given device tree - * ends without an FDT_END tag. */ -#define FDT_ERR_BADMAGIC 9 - /* FDT_ERR_BADMAGIC: Given "device tree" appears not to be a - * device tree at all - it is missing the flattened device - * tree magic number. */ -#define FDT_ERR_BADVERSION 10 - /* FDT_ERR_BADVERSION: Given device tree has a version which - * can't be handled by the requested operation. For - * read-write functions, this may mean that fdt_open_into() is - * required to convert the tree to the expected version. */ -#define FDT_ERR_BADSTRUCTURE 11 - /* FDT_ERR_BADSTRUCTURE: Given device tree has a corrupt - * structure block or other serious error (e.g. misnested - * nodes, or subnodes preceding properties). */ -#define FDT_ERR_BADLAYOUT 12 - /* FDT_ERR_BADLAYOUT: For read-write functions, the given - * device tree has it's sub-blocks in an order that the - * function can't handle (memory reserve map, then structure, - * then strings). Use fdt_open_into() to reorganize the tree - * into a form suitable for the read-write operations. */ - -/* "Can't happen" error indicating a bug in libfdt */ -#define FDT_ERR_INTERNAL 13 - /* FDT_ERR_INTERNAL: libfdt has failed an internal assertion. - * Should never be returned, if it is, it indicates a bug in - * libfdt itself. */ - -#define FDT_ERR_MAX 13 - -/**********************************************************************/ -/* Low-level functions (you probably don't need these) */ -/**********************************************************************/ - -const void *fdt_offset_ptr(const void *fdt, int offset, int checklen); -static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen) -{ - return (void *)(uintptr_t)fdt_offset_ptr(fdt, offset, checklen); -} - -uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset); - -/**********************************************************************/ -/* Traversal functions */ -/**********************************************************************/ - -int fdt_next_node(const void *fdt, int offset, int *depth); - -/**********************************************************************/ -/* General functions */ -/**********************************************************************/ - -#define fdt_get_header(fdt, field) \ - (fdt32_to_cpu(((const struct fdt_header *)(fdt))->field)) -#define fdt_magic(fdt) (fdt_get_header(fdt, magic)) -#define fdt_totalsize(fdt) (fdt_get_header(fdt, totalsize)) -#define fdt_off_dt_struct(fdt) (fdt_get_header(fdt, off_dt_struct)) -#define fdt_off_dt_strings(fdt) (fdt_get_header(fdt, off_dt_strings)) -#define fdt_off_mem_rsvmap(fdt) (fdt_get_header(fdt, off_mem_rsvmap)) -#define fdt_version(fdt) (fdt_get_header(fdt, version)) -#define fdt_last_comp_version(fdt) (fdt_get_header(fdt, last_comp_version)) -#define fdt_boot_cpuid_phys(fdt) (fdt_get_header(fdt, boot_cpuid_phys)) -#define fdt_size_dt_strings(fdt) (fdt_get_header(fdt, size_dt_strings)) -#define fdt_size_dt_struct(fdt) (fdt_get_header(fdt, size_dt_struct)) - -#define __fdt_set_hdr(name) \ - static inline void fdt_set_##name(void *fdt, uint32_t val) \ - { \ - struct fdt_header *fdth = fdt; \ - fdth->name = cpu_to_fdt32(val); \ - } -__fdt_set_hdr(magic); -__fdt_set_hdr(totalsize); -__fdt_set_hdr(off_dt_struct); -__fdt_set_hdr(off_dt_strings); -__fdt_set_hdr(off_mem_rsvmap); -__fdt_set_hdr(version); -__fdt_set_hdr(last_comp_version); -__fdt_set_hdr(boot_cpuid_phys); -__fdt_set_hdr(size_dt_strings); -__fdt_set_hdr(size_dt_struct); -#undef __fdt_set_hdr - -/** - * fdt_check_header - sanity check a device tree or possible device tree - * @fdt: pointer to data which might be a flattened device tree - * - * fdt_check_header() checks that the given buffer contains what - * appears to be a flattened device tree with sane information in its - * header. - * - * returns: - * 0, if the buffer appears to contain a valid device tree - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, standard meanings, as above - */ -int fdt_check_header(const void *fdt); - -/** - * fdt_move - move a device tree around in memory - * @fdt: pointer to the device tree to move - * @buf: pointer to memory where the device is to be moved - * @bufsize: size of the memory space at buf - * - * fdt_move() relocates, if possible, the device tree blob located at - * fdt to the buffer at buf of size bufsize. The buffer may overlap - * with the existing device tree blob at fdt. Therefore, - * fdt_move(fdt, fdt, fdt_totalsize(fdt)) - * should always succeed. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, bufsize is insufficient to contain the device tree - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, standard meanings - */ -int fdt_move(const void *fdt, void *buf, int bufsize); - -/**********************************************************************/ -/* Read-only functions */ -/**********************************************************************/ - -/** - * fdt_string - retrieve a string from the strings block of a device tree - * @fdt: pointer to the device tree blob - * @stroffset: offset of the string within the strings block (native endian) - * - * fdt_string() retrieves a pointer to a single string from the - * strings block of the device tree blob at fdt. - * - * returns: - * a pointer to the string, on success - * NULL, if stroffset is out of bounds - */ -const char *fdt_string(const void *fdt, int stroffset); - -/** - * fdt_num_mem_rsv - retrieve the number of memory reserve map entries - * @fdt: pointer to the device tree blob - * - * Returns the number of entries in the device tree blob's memory - * reservation map. This does not include the terminating 0,0 entry - * or any other (0,0) entries reserved for expansion. - * - * returns: - * the number of entries - */ -int fdt_num_mem_rsv(const void *fdt); - -/** - * fdt_get_mem_rsv - retrieve one memory reserve map entry - * @fdt: pointer to the device tree blob - * @address, @size: pointers to 64-bit variables - * - * On success, *address and *size will contain the address and size of - * the n-th reserve map entry from the device tree blob, in - * native-endian format. - * - * returns: - * 0, on success - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, standard meanings - */ -int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size); - -/** - * fdt_subnode_offset_namelen - find a subnode based on substring - * @fdt: pointer to the device tree blob - * @parentoffset: structure block offset of a node - * @name: name of the subnode to locate - * @namelen: number of characters of name to consider - * - * Identical to fdt_subnode_offset(), but only examine the first - * namelen characters of name for matching the subnode name. This is - * useful for finding subnodes based on a portion of a larger string, - * such as a full path. - */ -int fdt_subnode_offset_namelen(const void *fdt, int parentoffset, - const char *name, int namelen); -/** - * fdt_subnode_offset - find a subnode of a given node - * @fdt: pointer to the device tree blob - * @parentoffset: structure block offset of a node - * @name: name of the subnode to locate - * - * fdt_subnode_offset() finds a subnode of the node at structure block - * offset parentoffset with the given name. name may include a unit - * address, in which case fdt_subnode_offset() will find the subnode - * with that unit address, or the unit address may be omitted, in - * which case fdt_subnode_offset() will find an arbitrary subnode - * whose name excluding unit address matches the given name. - * - * returns: - * structure block offset of the requested subnode (>=0), on success - * -FDT_ERR_NOTFOUND, if the requested subnode does not exist - * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings. - */ -int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name); - -/** - * fdt_path_offset - find a tree node by its full path - * @fdt: pointer to the device tree blob - * @path: full path of the node to locate - * - * fdt_path_offset() finds a node of a given path in the device tree. - * Each path component may omit the unit address portion, but the - * results of this are undefined if any such path component is - * ambiguous (that is if there are multiple nodes at the relevant - * level matching the given component, differentiated only by unit - * address). - * - * returns: - * structure block offset of the node with the requested path (>=0), on success - * -FDT_ERR_BADPATH, given path does not begin with '/' or is invalid - * -FDT_ERR_NOTFOUND, if the requested node does not exist - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings. - */ -int fdt_path_offset(const void *fdt, const char *path); - -/** - * fdt_get_name - retrieve the name of a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: structure block offset of the starting node - * @lenp: pointer to an integer variable (will be overwritten) or NULL - * - * fdt_get_name() retrieves the name (including unit address) of the - * device tree node at structure block offset nodeoffset. If lenp is - * non-NULL, the length of this name is also returned, in the integer - * pointed to by lenp. - * - * returns: - * pointer to the node's name, on success - * If lenp is non-NULL, *lenp contains the length of that name (>=0) - * NULL, on error - * if lenp is non-NULL *lenp contains an error code (<0): - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, standard meanings - */ -const char *fdt_get_name(const void *fdt, int nodeoffset, int *lenp); - -/** - * fdt_get_property - find a given property in a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to find - * @name: name of the property to find - * @lenp: pointer to an integer variable (will be overwritten) or NULL - * - * fdt_get_property() retrieves a pointer to the fdt_property - * structure within the device tree blob corresponding to the property - * named 'name' of the node at offset nodeoffset. If lenp is - * non-NULL, the length of the property value is also returned, in the - * integer pointed to by lenp. - * - * returns: - * pointer to the structure representing the property - * if lenp is non-NULL, *lenp contains the length of the property - * value (>=0) - * NULL, on error - * if lenp is non-NULL, *lenp contains an error code (<0): - * -FDT_ERR_NOTFOUND, node does not have named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -const struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset, - const char *name, int *lenp); -static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset, - const char *name, - int *lenp) -{ - return (struct fdt_property *)(uintptr_t) - fdt_get_property(fdt, nodeoffset, name, lenp); -} - -/** - * fdt_getprop - retrieve the value of a given property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to find - * @name: name of the property to find - * @lenp: pointer to an integer variable (will be overwritten) or NULL - * - * fdt_getprop() retrieves a pointer to the value of the property - * named 'name' of the node at offset nodeoffset (this will be a - * pointer to within the device blob itself, not a copy of the value). - * If lenp is non-NULL, the length of the property value is also - * returned, in the integer pointed to by lenp. - * - * returns: - * pointer to the property's value - * if lenp is non-NULL, *lenp contains the length of the property - * value (>=0) - * NULL, on error - * if lenp is non-NULL, *lenp contains an error code (<0): - * -FDT_ERR_NOTFOUND, node does not have named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -const void *fdt_getprop(const void *fdt, int nodeoffset, - const char *name, int *lenp); -static inline void *fdt_getprop_w(void *fdt, int nodeoffset, - const char *name, int *lenp) -{ - return (void *)(uintptr_t)fdt_getprop(fdt, nodeoffset, name, lenp); -} - -/** - * fdt_get_phandle - retrieve the phandle of a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: structure block offset of the node - * - * fdt_get_phandle() retrieves the phandle of the device tree node at - * structure block offset nodeoffset. - * - * returns: - * the phandle of the node at nodeoffset, on success (!= 0, != -1) - * 0, if the node has no phandle, or another error occurs - */ -uint32_t fdt_get_phandle(const void *fdt, int nodeoffset); - -/** - * fdt_get_path - determine the full path of a node - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose path to find - * @buf: character buffer to contain the returned path (will be overwritten) - * @buflen: size of the character buffer at buf - * - * fdt_get_path() computes the full path of the node at offset - * nodeoffset, and records that path in the buffer at buf. - * - * NOTE: This function is expensive, as it must scan the device tree - * structure from the start to nodeoffset. - * - * returns: - * 0, on success - * buf contains the absolute path of the node at - * nodeoffset, as a NUL-terminated string. - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_NOSPACE, the path of the given node is longer than (bufsize-1) - * characters and will not fit in the given buffer. - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen); - -/** - * fdt_supernode_atdepth_offset - find a specific ancestor of a node - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose parent to find - * @supernodedepth: depth of the ancestor to find - * @nodedepth: pointer to an integer variable (will be overwritten) or NULL - * - * fdt_supernode_atdepth_offset() finds an ancestor of the given node - * at a specific depth from the root (where the root itself has depth - * 0, its immediate subnodes depth 1 and so forth). So - * fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, NULL); - * will always return 0, the offset of the root node. If the node at - * nodeoffset has depth D, then: - * fdt_supernode_atdepth_offset(fdt, nodeoffset, D, NULL); - * will return nodeoffset itself. - * - * NOTE: This function is expensive, as it must scan the device tree - * structure from the start to nodeoffset. - * - * returns: - - * structure block offset of the node at node offset's ancestor - * of depth supernodedepth (>=0), on success - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag -* -FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of nodeoffset - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset, - int supernodedepth, int *nodedepth); - -/** - * fdt_node_depth - find the depth of a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose parent to find - * - * fdt_node_depth() finds the depth of a given node. The root node - * has depth 0, its immediate subnodes depth 1 and so forth. - * - * NOTE: This function is expensive, as it must scan the device tree - * structure from the start to nodeoffset. - * - * returns: - * depth of the node at nodeoffset (>=0), on success - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_node_depth(const void *fdt, int nodeoffset); - -/** - * fdt_parent_offset - find the parent of a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose parent to find - * - * fdt_parent_offset() locates the parent node of a given node (that - * is, it finds the offset of the node which contains the node at - * nodeoffset as a subnode). - * - * NOTE: This function is expensive, as it must scan the device tree - * structure from the start to nodeoffset, *twice*. - * - * returns: - * structure block offset of the parent of the node at nodeoffset - * (>=0), on success - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_parent_offset(const void *fdt, int nodeoffset); - -/** - * fdt_node_offset_by_prop_value - find nodes with a given property value - * @fdt: pointer to the device tree blob - * @startoffset: only find nodes after this offset - * @propname: property name to check - * @propval: property value to search for - * @proplen: length of the value in propval - * - * fdt_node_offset_by_prop_value() returns the offset of the first - * node after startoffset, which has a property named propname whose - * value is of length proplen and has value equal to propval; or if - * startoffset is -1, the very first such node in the tree. - * - * To iterate through all nodes matching the criterion, the following - * idiom can be used: - * offset = fdt_node_offset_by_prop_value(fdt, -1, propname, - * propval, proplen); - * while (offset != -FDT_ERR_NOTFOUND) { - * // other code here - * offset = fdt_node_offset_by_prop_value(fdt, offset, propname, - * propval, proplen); - * } - * - * Note the -1 in the first call to the function, if 0 is used here - * instead, the function will never locate the root node, even if it - * matches the criterion. - * - * returns: - * structure block offset of the located node (>= 0, >startoffset), - * on success - * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the - * tree after startoffset - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_node_offset_by_prop_value(const void *fdt, int startoffset, - const char *propname, - const void *propval, int proplen); - -/** - * fdt_node_offset_by_phandle - find the node with a given phandle - * @fdt: pointer to the device tree blob - * @phandle: phandle value - * - * fdt_node_offset_by_phandle() returns the offset of the node - * which has the given phandle value. If there is more than one node - * in the tree with the given phandle (an invalid tree), results are - * undefined. - * - * returns: - * structure block offset of the located node (>= 0), on success - * -FDT_ERR_NOTFOUND, no node with that phandle exists - * -FDT_ERR_BADPHANDLE, given phandle value was invalid (0 or -1) - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle); - -/** - * fdt_node_check_compatible: check a node's compatible property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of a tree node - * @compatible: string to match against - * - * - * fdt_node_check_compatible() returns 0 if the given node contains a - * 'compatible' property with the given string as one of its elements, - * it returns non-zero otherwise, or on error. - * - * returns: - * 0, if the node has a 'compatible' property listing the given string - * 1, if the node has a 'compatible' property, but it does not list - * the given string - * -FDT_ERR_NOTFOUND, if the given node has no 'compatible' property - * -FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_node_check_compatible(const void *fdt, int nodeoffset, - const char *compatible); - -/** - * fdt_node_offset_by_compatible - find nodes with a given 'compatible' value - * @fdt: pointer to the device tree blob - * @startoffset: only find nodes after this offset - * @compatible: 'compatible' string to match against - * - * fdt_node_offset_by_compatible() returns the offset of the first - * node after startoffset, which has a 'compatible' property which - * lists the given compatible string; or if startoffset is -1, the - * very first such node in the tree. - * - * To iterate through all nodes matching the criterion, the following - * idiom can be used: - * offset = fdt_node_offset_by_compatible(fdt, -1, compatible); - * while (offset != -FDT_ERR_NOTFOUND) { - * // other code here - * offset = fdt_node_offset_by_compatible(fdt, offset, compatible); - * } - * - * Note the -1 in the first call to the function, if 0 is used here - * instead, the function will never locate the root node, even if it - * matches the criterion. - * - * returns: - * structure block offset of the located node (>= 0, >startoffset), - * on success - * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the - * tree after startoffset - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_node_offset_by_compatible(const void *fdt, int startoffset, - const char *compatible); - -/**********************************************************************/ -/* Write-in-place functions */ -/**********************************************************************/ - -/** - * fdt_setprop_inplace - change a property's value, but not its size - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @val: pointer to data to replace the property value with - * @len: length of the property value - * - * fdt_setprop_inplace() replaces the value of a given property with - * the data in val, of length len. This function cannot change the - * size of a property, and so will only work if len is equal to the - * current length of the property. - * - * This function will alter only the bytes in the blob which contain - * the given property value, and will not alter or move any other part - * of the tree. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, if len is not equal to the property's current length - * -FDT_ERR_NOTFOUND, node does not have the named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, - const void *val, int len); - -/** - * fdt_setprop_inplace_cell - change the value of a single-cell property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @val: cell (32-bit integer) value to replace the property with - * - * fdt_setprop_inplace_cell() replaces the value of a given property - * with the 32-bit integer cell value in val, converting val to - * big-endian if necessary. This function cannot change the size of a - * property, and so will only work if the property already exists and - * has length 4. - * - * This function will alter only the bytes in the blob which contain - * the given property value, and will not alter or move any other part - * of the tree. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, if the property's length is not equal to 4 - * -FDT_ERR_NOTFOUND, node does not have the named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset, - const char *name, uint32_t val) -{ - val = cpu_to_fdt32(val); - return fdt_setprop_inplace(fdt, nodeoffset, name, &val, sizeof(val)); -} - -/** - * fdt_nop_property - replace a property with nop tags - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to nop - * @name: name of the property to nop - * - * fdt_nop_property() will replace a given property's representation - * in the blob with FDT_NOP tags, effectively removing it from the - * tree. - * - * This function will alter only the bytes in the blob which contain - * the property, and will not alter or move any other part of the - * tree. - * - * returns: - * 0, on success - * -FDT_ERR_NOTFOUND, node does not have the named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_nop_property(void *fdt, int nodeoffset, const char *name); - -/** - * fdt_nop_node - replace a node (subtree) with nop tags - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node to nop - * - * fdt_nop_node() will replace a given node's representation in the - * blob, including all its subnodes, if any, with FDT_NOP tags, - * effectively removing it from the tree. - * - * This function will alter only the bytes in the blob which contain - * the node and its properties and subnodes, and will not alter or - * move any other part of the tree. - * - * returns: - * 0, on success - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_nop_node(void *fdt, int nodeoffset); - -/**********************************************************************/ -/* Sequential write functions */ -/**********************************************************************/ - -int fdt_create(void *buf, int bufsize); -int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size); -int fdt_finish_reservemap(void *fdt); -int fdt_begin_node(void *fdt, const char *name); -int fdt_property(void *fdt, const char *name, const void *val, int len); -static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val) -{ - val = cpu_to_fdt32(val); - return fdt_property(fdt, name, &val, sizeof(val)); -} -#define fdt_property_string(fdt, name, str) \ - fdt_property(fdt, name, str, strlen(str)+1) -int fdt_end_node(void *fdt); -int fdt_finish(void *fdt); - -/**********************************************************************/ -/* Read-write functions */ -/**********************************************************************/ - -int fdt_open_into(const void *fdt, void *buf, int bufsize); -int fdt_pack(void *fdt); - -/** - * fdt_add_mem_rsv - add one memory reserve map entry - * @fdt: pointer to the device tree blob - * @address, @size: 64-bit values (native endian) - * - * Adds a reserve map entry to the given blob reserving a region at - * address address of length size. - * - * This function will insert data into the reserve map and will - * therefore change the indexes of some entries in the table. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to - * contain the new reservation entry - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size); - -/** - * fdt_del_mem_rsv - remove a memory reserve map entry - * @fdt: pointer to the device tree blob - * @n: entry to remove - * - * fdt_del_mem_rsv() removes the n-th memory reserve map entry from - * the blob. - * - * This function will delete data from the reservation table and will - * therefore change the indexes of some entries in the table. - * - * returns: - * 0, on success - * -FDT_ERR_NOTFOUND, there is no entry of the given index (i.e. there - * are less than n+1 reserve map entries) - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_del_mem_rsv(void *fdt, int n); - -/** - * fdt_set_name - change the name of a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: structure block offset of a node - * @name: name to give the node - * - * fdt_set_name() replaces the name (including unit address, if any) - * of the given node with the given string. NOTE: this function can't - * efficiently check if the new name is unique amongst the given - * node's siblings; results are undefined if this function is invoked - * with a name equal to one of the given node's siblings. - * - * This function may insert or delete data from the blob, and will - * therefore change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob - * to contain the new name - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, standard meanings - */ -int fdt_set_name(void *fdt, int nodeoffset, const char *name); - -/** - * fdt_setprop - create or change a property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @val: pointer to data to set the property value to - * @len: length of the property value - * - * fdt_setprop() sets the value of the named property in the given - * node to the given value and length, creating the property if it - * does not already exist. - * - * This function may insert or delete data from the blob, and will - * therefore change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to - * contain the new property value - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_setprop(void *fdt, int nodeoffset, const char *name, - const void *val, int len); - -/** - * fdt_setprop_cell - set a property to a single cell value - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @val: 32-bit integer value for the property (native endian) - * - * fdt_setprop_cell() sets the value of the named property in the - * given node to the given cell value (converting to big-endian if - * necessary), or creates a new property with that value if it does - * not already exist. - * - * This function may insert or delete data from the blob, and will - * therefore change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to - * contain the new property value - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name, - uint32_t val) -{ - val = cpu_to_fdt32(val); - return fdt_setprop(fdt, nodeoffset, name, &val, sizeof(val)); -} - -/** - * fdt_setprop_string - set a property to a string value - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @str: string value for the property - * - * fdt_setprop_string() sets the value of the named property in the - * given node to the given string value (using the length of the - * string to determine the new length of the property), or creates a - * new property with that value if it does not already exist. - * - * This function may insert or delete data from the blob, and will - * therefore change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to - * contain the new property value - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -#define fdt_setprop_string(fdt, nodeoffset, name, str) \ - fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) - -/** - * fdt_delprop - delete a property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to nop - * @name: name of the property to nop - * - * fdt_del_property() will delete the given property. - * - * This function will delete data from the blob, and will therefore - * change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOTFOUND, node does not have the named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_delprop(void *fdt, int nodeoffset, const char *name); - -/** - * fdt_add_subnode_namelen - creates a new node based on substring - * @fdt: pointer to the device tree blob - * @parentoffset: structure block offset of a node - * @name: name of the subnode to locate - * @namelen: number of characters of name to consider - * - * Identical to fdt_add_subnode(), but use only the first namelen - * characters of name as the name of the new node. This is useful for - * creating subnodes based on a portion of a larger string, such as a - * full path. - */ -int fdt_add_subnode_namelen(void *fdt, int parentoffset, - const char *name, int namelen); - -/** - * fdt_add_subnode - creates a new node - * @fdt: pointer to the device tree blob - * @parentoffset: structure block offset of a node - * @name: name of the subnode to locate - * - * fdt_add_subnode() creates a new node as a subnode of the node at - * structure block offset parentoffset, with the given name (which - * should include the unit address, if any). - * - * This function will insert data into the blob, and will therefore - * change the offsets of some existing nodes. - - * returns: - * structure block offset of the created nodeequested subnode (>=0), on success - * -FDT_ERR_NOTFOUND, if the requested subnode does not exist - * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag - * -FDT_ERR_EXISTS, if the node at parentoffset already has a subnode of - * the given name - * -FDT_ERR_NOSPACE, if there is insufficient free space in the - * blob to contain the new node - * -FDT_ERR_NOSPACE - * -FDT_ERR_BADLAYOUT - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings. - */ -int fdt_add_subnode(void *fdt, int parentoffset, const char *name); - -/** - * fdt_del_node - delete a node (subtree) - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node to nop - * - * fdt_del_node() will remove the given node, including all its - * subnodes if any, from the blob. - * - * This function will delete data from the blob, and will therefore - * change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_del_node(void *fdt, int nodeoffset); - -/**********************************************************************/ -/* Debugging / informational functions */ -/**********************************************************************/ - -const char *fdt_strerror(int errval); - -#endif /* _LIBFDT_H */ diff --git a/arch/powerpc/boot/libfdt/libfdt_internal.h b/arch/powerpc/boot/libfdt/libfdt_internal.h deleted file mode 100644 index 46eb93e4af5c..000000000000 --- a/arch/powerpc/boot/libfdt/libfdt_internal.h +++ /dev/null @@ -1,95 +0,0 @@ -#ifndef _LIBFDT_INTERNAL_H -#define _LIBFDT_INTERNAL_H -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include - -#define FDT_ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1)) -#define FDT_TAGALIGN(x) (FDT_ALIGN((x), FDT_TAGSIZE)) - -#define FDT_CHECK_HEADER(fdt) \ - { \ - int err; \ - if ((err = fdt_check_header(fdt)) != 0) \ - return err; \ - } - -uint32_t _fdt_next_tag(const void *fdt, int startoffset, int *nextoffset); -int _fdt_check_node_offset(const void *fdt, int offset); -const char *_fdt_find_string(const char *strtab, int tabsize, const char *s); -int _fdt_node_end_offset(void *fdt, int nodeoffset); - -static inline const void *_fdt_offset_ptr(const void *fdt, int offset) -{ - return (const char *)fdt + fdt_off_dt_struct(fdt) + offset; -} - -static inline void *_fdt_offset_ptr_w(void *fdt, int offset) -{ - return (void *)(uintptr_t)_fdt_offset_ptr(fdt, offset); -} - -static inline const struct fdt_reserve_entry *_fdt_mem_rsv(const void *fdt, int n) -{ - const struct fdt_reserve_entry *rsv_table = - (const struct fdt_reserve_entry *) - ((const char *)fdt + fdt_off_mem_rsvmap(fdt)); - - return rsv_table + n; -} -static inline struct fdt_reserve_entry *_fdt_mem_rsv_w(void *fdt, int n) -{ - return (void *)(uintptr_t)_fdt_mem_rsv(fdt, n); -} - -#define FDT_SW_MAGIC (~FDT_MAGIC) - -#endif /* _LIBFDT_INTERNAL_H */ diff --git a/arch/powerpc/boot/simpleboot.c b/arch/powerpc/boot/simpleboot.c index c58a0dada992..21cd48074ec8 100644 --- a/arch/powerpc/boot/simpleboot.c +++ b/arch/powerpc/boot/simpleboot.c @@ -19,7 +19,7 @@ #include "types.h" #include "io.h" #include "stdio.h" -#include "libfdt/libfdt.h" +#include BSS_STACK(4*1024); -- cgit v1.2.2 From 283a5d250e5315b76e7bfd7498c581324c922bfe Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sat, 2 May 2009 10:14:15 -0400 Subject: [ARM] Kconfig typo fix: "PXA930" -> "CPU_PXA930". Signed-off-by: Robert P. J. Day Signed-off-by: Russell King --- arch/arm/mach-pxa/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 3e66d9099eab..17d3fbd368a3 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -289,12 +289,12 @@ config MACH_LITTLETON config MACH_TAVOREVB bool "PXA930 Evaluation Board (aka TavorEVB)" select PXA3xx - select PXA930 + select CPU_PXA930 config MACH_SAAR bool "PXA930 Handheld Platform (aka SAAR)" select PXA3xx - select PXA930 + select CPU_PXA930 config MACH_ARMCORE bool "CompuLab CM-X255/CM-X270 modules" -- cgit v1.2.2 From 6da7342ff1c5274c51ada084974668d10f769c16 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Mon, 4 May 2009 11:44:38 +0200 Subject: amd-iommu: fix iommu flag masks The feature bits should be set via bitmasks, not via feature IDs. [ Impact: fix feature enabling in newer IOMMU versions ] Signed-off-by: Joerg Roedel LKML-Reference: <20090504102028.GA30307@amd.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/amd_iommu_init.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 42c33cebf00f..8c0be0902dac 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -49,10 +49,10 @@ #define IVHD_DEV_EXT_SELECT 0x46 #define IVHD_DEV_EXT_SELECT_RANGE 0x47 -#define IVHD_FLAG_HT_TUN_EN 0x00 -#define IVHD_FLAG_PASSPW_EN 0x01 -#define IVHD_FLAG_RESPASSPW_EN 0x02 -#define IVHD_FLAG_ISOC_EN 0x03 +#define IVHD_FLAG_HT_TUN_EN_MASK 0x01 +#define IVHD_FLAG_PASSPW_EN_MASK 0x02 +#define IVHD_FLAG_RESPASSPW_EN_MASK 0x04 +#define IVHD_FLAG_ISOC_EN_MASK 0x08 #define IVMD_FLAG_EXCL_RANGE 0x08 #define IVMD_FLAG_UNITY_MAP 0x01 @@ -569,19 +569,19 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu, * First set the recommended feature enable bits from ACPI * into the IOMMU control registers */ - h->flags & IVHD_FLAG_HT_TUN_EN ? + h->flags & IVHD_FLAG_HT_TUN_EN_MASK ? iommu_feature_enable(iommu, CONTROL_HT_TUN_EN) : iommu_feature_disable(iommu, CONTROL_HT_TUN_EN); - h->flags & IVHD_FLAG_PASSPW_EN ? + h->flags & IVHD_FLAG_PASSPW_EN_MASK ? iommu_feature_enable(iommu, CONTROL_PASSPW_EN) : iommu_feature_disable(iommu, CONTROL_PASSPW_EN); - h->flags & IVHD_FLAG_RESPASSPW_EN ? + h->flags & IVHD_FLAG_RESPASSPW_EN_MASK ? iommu_feature_enable(iommu, CONTROL_RESPASSPW_EN) : iommu_feature_disable(iommu, CONTROL_RESPASSPW_EN); - h->flags & IVHD_FLAG_ISOC_EN ? + h->flags & IVHD_FLAG_ISOC_EN_MASK ? iommu_feature_enable(iommu, CONTROL_ISOC_EN) : iommu_feature_disable(iommu, CONTROL_ISOC_EN); -- cgit v1.2.2 From 35d11680a9d82c93eb92f08f9702b72877427b4a Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Mon, 4 May 2009 20:28:59 +0200 Subject: x86: show number of core_siblings instead of thread_siblings in /proc/cpuinfo Commit 7ad728f98162cb1af06a85b2a5fc422dddd4fb78 (cpumask: x86: convert cpu_sibling_map/cpu_core_map to cpumask_var_t) changed the output of /proc/cpuinfo for siblings: Example on an AMD Phenom: physical id : 0 siblings : 1 core id : 3 cpu cores : 4 Before that commit it was: physical id : 0 siblings : 4 core id : 3 cpu cores : 4 Instead of cpu_core_mask it now uses cpu_sibling_mask to count siblings. This is due to the following hunk of above commit: | --- a/arch/x86/kernel/cpu/proc.c | +++ b/arch/x86/kernel/cpu/proc.c | @@ -14,7 +14,7 @@ static void show_cpuinfo_core(struct seq_file *m, struct cpuinf | if (c->x86_max_cores * smp_num_siblings > 1) { | seq_printf(m, "physical id\t: %d\n", c->phys_proc_id); | seq_printf(m, "siblings\t: %d\n", | - cpus_weight(per_cpu(cpu_core_map, cpu))); | + cpumask_weight(cpu_sibling_mask(cpu))); | seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id); | seq_printf(m, "cpu cores\t: %d\n", c->booted_cores); | seq_printf(m, "apicid\t\t: %d\n", c->apicid); This was a mistake, because the impact line shows that this side-effect was not anticipated: Impact: reduce per-cpu size for CONFIG_CPUMASK_OFFSTACK=y So revert the respective hunk to restore the old behavior. [ Impact: fix sibling-info regression in /proc/cpuinfo ] Signed-off-by: Andreas Herrmann Cc: Rusty Russell LKML-Reference: <20090504182859.GA29045@alberich.amd.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c index f93047fed791..d5e30397246b 100644 --- a/arch/x86/kernel/cpu/proc.c +++ b/arch/x86/kernel/cpu/proc.c @@ -14,7 +14,7 @@ static void show_cpuinfo_core(struct seq_file *m, struct cpuinfo_x86 *c, if (c->x86_max_cores * smp_num_siblings > 1) { seq_printf(m, "physical id\t: %d\n", c->phys_proc_id); seq_printf(m, "siblings\t: %d\n", - cpumask_weight(cpu_sibling_mask(cpu))); + cpumask_weight(cpu_core_mask(cpu))); seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id); seq_printf(m, "cpu cores\t: %d\n", c->booted_cores); seq_printf(m, "apicid\t\t: %d\n", c->apicid); -- cgit v1.2.2 From f2d41ecb0f096e4fc58d1456c9d54560f6e2b955 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Mon, 4 May 2009 12:02:23 -0400 Subject: [ARM] Kirkwood: update defconfig Signed-off-by: Nicolas Pitre --- arch/arm/configs/kirkwood_defconfig | 92 +++++++++++++++++++++++++++---------- 1 file changed, 69 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index c367ae44012e..dcf8153a947d 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc5 -# Tue Mar 3 21:45:57 2009 +# Linux kernel version: 2.6.30-rc4 +# Mon May 4 11:58:57 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -66,20 +66,20 @@ CONFIG_NAMESPACES=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -89,6 +89,7 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -101,6 +102,7 @@ CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -113,7 +115,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -142,6 +143,7 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -162,6 +164,7 @@ CONFIG_ARCH_KIRKWOOD=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set @@ -217,6 +220,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # @@ -237,6 +241,7 @@ CONFIG_AEABI=y CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -249,6 +254,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -293,7 +300,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -324,7 +330,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -357,6 +363,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -365,20 +372,20 @@ CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_NET_PKTGEN=m # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y CONFIG_CFG80211=y # CONFIG_CFG80211_REG_DEBUG is not set -# CONFIG_NL80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_LIB80211=y +# CONFIG_LIB80211_DEBUG is not set CONFIG_MAC80211=y # @@ -513,7 +520,6 @@ CONFIG_MTD_NAND_ORION=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -592,8 +598,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -614,6 +622,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -687,6 +696,7 @@ CONFIG_SATA_MV=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -724,8 +734,10 @@ CONFIG_MII=y # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set # CONFIG_SMC911X is not set # CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -763,6 +775,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -777,6 +790,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -789,10 +803,11 @@ CONFIG_WLAN_80211=y CONFIG_LIBERTAS=y # CONFIG_LIBERTAS_USB is not set CONFIG_LIBERTAS_SDIO=y +# CONFIG_LIBERTAS_SPI is not set # CONFIG_LIBERTAS_DEBUG is not set # CONFIG_LIBERTAS_THINFIRM is not set -# CONFIG_HERMES is not set # CONFIG_ATMEL is not set +# CONFIG_AT76C50X_USB is not set # CONFIG_PRISM54 is not set # CONFIG_USB_ZD1201 is not set # CONFIG_USB_NET_RNDIS_WLAN is not set @@ -800,20 +815,20 @@ CONFIG_LIBERTAS_SDIO=y # CONFIG_RTL8187 is not set # CONFIG_ADM8211 is not set # CONFIG_MAC80211_HWSIM is not set +# CONFIG_MWL8K is not set # CONFIG_P54_COMMON is not set # CONFIG_ATH5K is not set # CONFIG_ATH9K is not set +# CONFIG_AR9170_USB is not set # CONFIG_IPW2100 is not set # CONFIG_IPW2200 is not set -# CONFIG_IWLCORE is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_IWLAGN is not set -# CONFIG_IWL3945 is not set +# CONFIG_IWLWIFI is not set # CONFIG_HOSTAP is not set # CONFIG_B43 is not set # CONFIG_B43LEGACY is not set # CONFIG_ZD1211RW is not set # CONFIG_RT2X00 is not set +# CONFIG_HERMES is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -908,6 +923,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2 # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set @@ -982,7 +998,6 @@ CONFIG_I2C_MV64XXX=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1082,15 +1097,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y +CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1152,11 +1169,11 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1198,7 +1215,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1215,6 +1231,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set @@ -1245,7 +1262,11 @@ CONFIG_LEDS_CLASS=y # # CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1255,6 +1276,10 @@ CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1329,7 +1354,9 @@ CONFIG_DMA_ENGINE=y # DMA Clients # # CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_REGULATOR is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1341,6 +1368,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -1360,6 +1388,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1419,6 +1452,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1430,7 +1464,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1502,6 +1535,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1538,10 +1574,12 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1551,11 +1589,15 @@ CONFIG_TRACING=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1587,10 +1629,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1659,6 +1703,7 @@ CONFIG_CRYPTO_ARC4=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1667,6 +1712,7 @@ CONFIG_CRYPTO_ARC4=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_BINARY_PRINTF=y # # Library routines @@ -1682,7 +1728,7 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.2 From 7e14acb44021132e66801066e9e7527300c5fc10 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Mon, 4 May 2009 14:09:33 -0400 Subject: [ARM] orion5x: update defconfig Signed-off-by: Nicolas Pitre --- arch/arm/configs/orion5x_defconfig | 363 ++++++++++++++++++++++++++++--------- 1 file changed, 279 insertions(+), 84 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 020e6a8a9e5c..5b98f7645119 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Fri Aug 22 12:38:51 2008 +# Linux kernel version: 2.6.30-rc4 +# Mon May 4 14:07:25 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -44,10 +42,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -55,48 +62,45 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y # CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set CONFIG_KRETPROBES=y -# CONFIG_HAVE_IOREMAP_PROT is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -104,11 +108,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -124,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System Type @@ -134,10 +135,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -158,14 +159,17 @@ CONFIG_CLASSIC_RCU=y CONFIG_ARCH_ORION5X=y # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Orion Implementations @@ -175,6 +179,7 @@ CONFIG_MACH_RD88F5182=y CONFIG_MACH_KUROBOX_PRO=y CONFIG_MACH_DNS323=y CONFIG_MACH_TS209=y +CONFIG_MACH_TERASTATION_PRO2=y CONFIG_MACH_LINKSTATION_PRO=y CONFIG_MACH_LINKSTATION_MINI=y CONFIG_MACH_TS409=y @@ -187,14 +192,6 @@ CONFIG_MACH_WNR854T=y CONFIG_MACH_RD88F5181L_GE=y CONFIG_MACH_RD88F5181L_FXO=y CONFIG_MACH_RD88F6183AP_GE=y - -# -# Boot options -# - -# -# Power management -# CONFIG_PLAT_ORION=y # @@ -228,6 +225,8 @@ CONFIG_PCI_SYSCALL=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # @@ -237,25 +236,32 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_LEDS=y CONFIG_LEDS_CPU=y CONFIG_ALIGNMENT_TRAP=y @@ -269,6 +275,11 @@ CONFIG_CMDLINE="" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + # # Floating point emulation # @@ -285,13 +296,18 @@ CONFIG_VFP=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # -# CONFIG_PM is not set +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +# CONFIG_SUSPEND is not set +# CONFIG_APM_EMULATION is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -328,7 +344,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -343,6 +359,15 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +CONFIG_NET_DSA=y +CONFIG_NET_DSA_TAG_DSA=y +CONFIG_NET_DSA_TAG_EDSA=y +# CONFIG_NET_DSA_TAG_TRAILER is not set +CONFIG_NET_DSA_MV88E6XXX=y +# CONFIG_NET_DSA_MV88E6060 is not set +CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y +CONFIG_NET_DSA_MV88E6131=y +CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -352,27 +377,29 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # CONFIG_NET_PKTGEN=m # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -397,6 +424,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -450,9 +478,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_IMPA7 is not set # CONFIG_MTD_INTEL_VR_NOR is not set @@ -477,6 +503,7 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_VERIFY_WRITE=y # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_CAFE is not set @@ -486,6 +513,11 @@ CONFIG_MTD_NAND_PLATFORM=y CONFIG_MTD_NAND_ORION=y # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # @@ -507,11 +539,20 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -569,7 +610,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -589,6 +634,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -663,6 +709,7 @@ CONFIG_SATA_MV=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -670,7 +717,26 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set @@ -680,19 +746,25 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -702,10 +774,12 @@ CONFIG_NET_PCI=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -713,6 +787,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -727,6 +802,8 @@ CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -735,7 +812,10 @@ CONFIG_MV643XX_ETH=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -819,11 +899,11 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -886,12 +966,9 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -911,14 +988,17 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -933,10 +1013,15 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -956,12 +1041,14 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -970,9 +1057,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_T7L66XB is not set -# CONFIG_MFD_TC6387XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -1013,9 +1103,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1030,10 +1147,13 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set # CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1042,12 +1162,15 @@ CONFIG_USB_DEVICE_CLASS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1055,20 +1178,20 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y # CONFIG_USB_STORAGE_ISD200 is not set -CONFIG_USB_STORAGE_DPCM=y # CONFIG_USB_STORAGE_USBAT is not set CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y @@ -1076,7 +1199,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1097,6 +1219,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1104,7 +1227,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1114,8 +1236,18 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -1124,7 +1256,10 @@ CONFIG_LEDS_CLASS=y # # CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1132,7 +1267,12 @@ CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1164,6 +1304,7 @@ CONFIG_RTC_DRV_M41T80=y # CONFIG_RTC_DRV_M41T80_WDT is not set CONFIG_RTC_DRV_S35390A=y # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1173,12 +1314,15 @@ CONFIG_RTC_DRV_S35390A=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set CONFIG_RTC_DRV_M48T86=y +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1196,16 +1340,12 @@ CONFIG_DMA_ENGINE=y # DMA Clients # # CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set - -# -# Voltage and Current regulators -# +# CONFIG_AUXDISPLAY is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1214,14 +1354,25 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=m +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1230,6 +1381,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1254,15 +1410,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1282,6 +1436,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1290,6 +1445,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1381,13 +1537,16 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set @@ -1411,25 +1570,46 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set @@ -1441,18 +1621,27 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_ASYNC_CORE=y CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_AEAD2=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=m # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1521,18 +1710,24 @@ CONFIG_CRYPTO_PCBC=m # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=m CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y @@ -1540,7 +1735,7 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.2 From 3a5df4bf2a1829a342f3a416c217049e8caa0a1b Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Mon, 4 May 2009 14:28:59 -0400 Subject: [ARM] mv78xx0: update defconfig Signed-off-by: Nicolas Pitre --- arch/arm/configs/mv78xx0_defconfig | 429 +++++++++++++++++++++++++++++-------- 1 file changed, 335 insertions(+), 94 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig index b0698722e0cb..398274b0771a 100644 --- a/arch/arm/configs/mv78xx0_defconfig +++ b/arch/arm/configs/mv78xx0_defconfig @@ -1,11 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Fri Jun 13 02:57:32 2008 +# Linux kernel version: 2.6.30-rc4 +# Mon May 4 14:22:12 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y -# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y @@ -22,8 +22,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -43,10 +42,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -54,32 +62,35 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y # CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y @@ -87,10 +98,9 @@ CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -98,12 +108,10 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -117,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System Type @@ -127,11 +135,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -152,28 +159,23 @@ CONFIG_ARCH_MV78XX0=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Marvell MV78xx0 Implementations # CONFIG_MACH_DB78X00_BP=y CONFIG_MACH_RD78X00_MASA=y - -# -# Boot options -# - -# -# Power management -# CONFIG_PLAT_ORION=y # @@ -199,6 +201,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set CONFIG_OUTER_CACHE=y CONFIG_CACHE_FEROCEON_L2=y +# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set # # Bus support @@ -208,6 +211,8 @@ CONFIG_PCI_SYSCALL=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # @@ -217,25 +222,33 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_HIGHMEM=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -247,6 +260,11 @@ CONFIG_CMDLINE="" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + # # Floating point emulation # @@ -263,6 +281,8 @@ CONFIG_VFP=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set @@ -271,10 +291,6 @@ CONFIG_BINFMT_ELF=y # # CONFIG_PM is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# CONFIG_NET=y # @@ -310,7 +326,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -325,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -334,26 +351,23 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # CONFIG_NET_PKTGEN=m # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -368,6 +382,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -376,6 +392,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -429,9 +446,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_IMPA7 is not set # CONFIG_MTD_INTEL_VR_NOR is not set @@ -456,6 +471,7 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_VERIFY_WRITE=y # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_CAFE is not set @@ -465,6 +481,11 @@ CONFIG_MTD_NAND_IDS=y CONFIG_MTD_NAND_ORION=y # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # @@ -486,10 +507,20 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -547,7 +578,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -566,6 +601,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -632,11 +669,15 @@ CONFIG_SATA_MV=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -644,7 +685,26 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set @@ -654,19 +714,25 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -676,18 +742,20 @@ CONFIG_NET_PCI=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -701,6 +769,9 @@ CONFIG_NETDEV_1000=y CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -709,7 +780,10 @@ CONFIG_MV643XX_ETH=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -786,11 +860,11 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -799,44 +873,63 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_MV64XXX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set -CONFIG_I2C_MV64XXX=y +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -848,6 +941,7 @@ CONFIG_I2C_MV64XXX=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -855,14 +949,17 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -877,10 +974,15 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -900,20 +1002,28 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -944,10 +1054,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -958,9 +1064,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -978,6 +1111,9 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -986,12 +1122,15 @@ CONFIG_USB_DEVICE_CLASS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -999,20 +1138,20 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y # CONFIG_USB_STORAGE_ISD200 is not set -CONFIG_USB_STORAGE_DPCM=y # CONFIG_USB_STORAGE_USBAT is not set CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y @@ -1028,7 +1167,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MON is not set # # USB port drivers @@ -1041,7 +1179,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1049,7 +1187,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1059,14 +1196,29 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y # # LED drivers # +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1074,7 +1226,12 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1105,6 +1262,8 @@ CONFIG_RTC_DRV_RS5C372=y CONFIG_RTC_DRV_M41T80=y # CONFIG_RTC_DRV_M41T80_WDT is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1114,18 +1273,25 @@ CONFIG_RTC_DRV_M41T80=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1134,14 +1300,25 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=m +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1150,6 +1327,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1174,15 +1356,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1202,25 +1382,27 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1301,11 +1483,16 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set @@ -1320,22 +1507,55 @@ CONFIG_DEBUG_PREEMPT=y # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_HIGHMEM is not set # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set @@ -1347,17 +1567,27 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_AEAD2=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=m # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1393,6 +1623,10 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1422,25 +1656,32 @@ CONFIG_CRYPTO_PCBC=m # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=m +# CONFIG_CRC_T10DIF is not set CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.2 From de0096d80980e26fab16ac3eff57f47fadad92cb Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Thu, 26 Mar 2009 22:21:16 +0100 Subject: mxc : Clean up properly when imx_dma_free() used without imx_dma_disable() The sequence imx_dma_request() imx_dma_enable() imx_dma_free() left the dma channel in_use mode and did not release the timer. Signed-off-by: Martin Fuzzey Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/dma-mx1-mx2.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c index e364a5ed10f1..a9126ed7935a 100644 --- a/arch/arm/plat-mxc/dma-mx1-mx2.c +++ b/arch/arm/plat-mxc/dma-mx1-mx2.c @@ -737,10 +737,7 @@ void imx_dma_free(int channel) local_irq_save(flags); /* Disable interrupts */ - __raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel), - DMA_BASE + DMA_DIMR); - __raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN, - DMA_BASE + DMA_CCR(channel)); + imx_dma_disable(channel); imxdma->name = NULL; #ifdef CONFIG_ARCH_MX2 -- cgit v1.2.2 From f2292532a5f0cf6359adca349cdd2a0150581937 Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Thu, 26 Mar 2009 22:27:52 +0100 Subject: mxc : BUG in imx_dma_request On MX2 platforms imx_dma_request() calls request_irq() which may sleep with interrupts disabled. Signed-off-by: Martin Fuzzey Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/dma-mx1-mx2.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c index a9126ed7935a..77646436c00e 100644 --- a/arch/arm/plat-mxc/dma-mx1-mx2.c +++ b/arch/arm/plat-mxc/dma-mx1-mx2.c @@ -693,12 +693,15 @@ int imx_dma_request(int channel, const char *name) local_irq_restore(flags); return -EBUSY; } + memset(imxdma, 0, sizeof(imxdma)); + imxdma->name = name; + local_irq_restore(flags); /* request_irq() can block */ #ifdef CONFIG_ARCH_MX2 ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA", NULL); if (ret) { - local_irq_restore(flags); + imxdma->name = NULL; printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n", MXC_INT_DMACH0 + channel, channel); return ret; @@ -708,13 +711,6 @@ int imx_dma_request(int channel, const char *name) imxdma->watchdog.data = channel; #endif - imxdma->name = name; - imxdma->irq_handler = NULL; - imxdma->err_handler = NULL; - imxdma->data = NULL; - imxdma->sg = NULL; - - local_irq_restore(flags); return ret; } EXPORT_SYMBOL(imx_dma_request); -- cgit v1.2.2 From 9abf137c6dbf6eabb3add98fcd8352c3dd520568 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 16 Apr 2009 14:12:54 +0200 Subject: ARM: ARCH_MXC should select HAVE_CLK All i.MX platforms support calls and should select HAVE_CLK. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Sascha Hauer --- arch/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9faccc411c2a..e60ec54df334 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -454,6 +454,7 @@ config ARCH_MXC select ARCH_MTD_XIP select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB + select HAVE_CLK help Support for Freescale MXC/iMX-based family of processors -- cgit v1.2.2 From f1fd4c64af58ec28d29bced9e94ecf6d5177c2b0 Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Fri, 17 Apr 2009 15:20:26 +0200 Subject: mx31: remove mx31moboard_defconfig We want to have a mx31_defconfig file that builds a kernel that is able to boot on all support mx31 systems and thus also can be better tested by automatic build scripts. For these reasons, this config file is not needed anymore. Signed-off-by: Valentin Longchamp Signed-off-by: Sascha Hauer --- arch/arm/configs/mx31moboard_defconfig | 790 --------------------------------- 1 file changed, 790 deletions(-) delete mode 100644 arch/arm/configs/mx31moboard_defconfig (limited to 'arch') diff --git a/arch/arm/configs/mx31moboard_defconfig b/arch/arm/configs/mx31moboard_defconfig deleted file mode 100644 index e90f86d6deef..000000000000 --- a/arch/arm/configs/mx31moboard_defconfig +++ /dev/null @@ -1,790 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc5 -# Fri Oct 24 11:41:22 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_LOKI is not set -# CONFIG_ARCH_MV78XX0 is not set -CONFIG_ARCH_MXC=y -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Freescale MXC Implementations -# -# CONFIG_ARCH_MX2 is not set -CONFIG_ARCH_MX3=y - -# -# MX3 Options -# -# CONFIG_MACH_MX31ADS is not set -# CONFIG_MACH_PCM037 is not set -# CONFIG_MACH_MX31LITE is not set -CONFIG_MACH_MX31MOBOARD=y -# CONFIG_MXC_IRQ_PRIOR is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_V6=y -# CONFIG_CPU_32v6K is not set -CONFIG_CPU_32v6=y -CONFIG_CPU_ABRT_EV6=y -CONFIG_CPU_PABRT_NOIFAR=y -CONFIG_CPU_CACHE_V6=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_TLB_V6=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -# CONFIG_OUTER_CACHE is not set - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ARCH_FLATMEM_HAS_HOLES=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" -# CONFIG_XIP_KERNEL is not set -# CONFIG_KEXEC is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_VFP=y - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -# CONFIG_PM is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -CONFIG_MTD_REDBOOT_PARTS_READONLY=y -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -# CONFIG_MTD_CFI_I2 is not set -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_AX88796 is not set -CONFIG_SMC91X=y -# CONFIG_DM9000 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set -# CONFIG_SPI is not set -CONFIG_ARCH_REQUIRE_GPIOLIB=y -CONFIG_GPIOLIB=y -# CONFIG_GPIO_SYSFS is not set - -# -# I2C GPIO expanders: -# - -# -# PCI GPIO expanders: -# - -# -# SPI GPIO expanders: -# -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_MFD_T7L66XB is not set -# CONFIG_MFD_TC6387XB is not set -# CONFIG_MFD_TC6393XB is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_SOUND is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set -# CONFIG_DMADEVICES is not set - -# -# Voltage and Current regulators -# -# CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set -# CONFIG_UIO is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -CONFIG_ROOT_NFS=y -# CONFIG_NFSD is not set -CONFIG_LOCKD=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set -# CONFIG_DLM is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -CONFIG_FRAME_POINTER=y -# CONFIG_LATENCYTOP is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_DEBUG_USER is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -- cgit v1.2.2 From e2c97e7fdc9d71637840dea8f76eb3782c3b2023 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 21 Apr 2009 12:39:59 +0200 Subject: MXC: remove BUG_ON in interrupt handler On i.MX31 I sometimes get spurious interrupts. There is no need to crash the whole system when this happens. Instead, silently ignore it. Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index c6483bad8a26..89e95798cc3b 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -124,7 +124,7 @@ static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc) irq_stat = __raw_readl(port->base + GPIO_ISR) & __raw_readl(port->base + GPIO_IMR); - BUG_ON(!irq_stat); + mxc_gpio_irq_handler(port, irq_stat); } #endif -- cgit v1.2.2 From 7b9020badf78327b3fcb567b466a1dd4d33710ce Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 21 Apr 2009 22:56:14 +0200 Subject: mx27ads: move PBC mapping out of vmalloc space MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Before this patch I got the following line in my dmesg: [ 0.000000] BUG: mapping for 0xd4000000 at 0xeb000000 overlaps vmalloc space VMALLOC_END is 0xf4000000 and there are the following other mappings defined for mx27ads: (0xa0500000,+0x00001000) maps to 0xffff0000 (0x10000000,+0x00100000) maps to 0xf4000000 (0x80000000,+0x00100000) maps to 0xf4100000 (0xd8000000,+0x00100000) maps to 0xf4200000 So map PBC to 0xf4300000. Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/include/mach/board-mx27ads.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h index 1cac9d1135cd..d42f4e6116f8 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h +++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h @@ -47,7 +47,7 @@ /* * Base address of PBC controller, CS4 */ -#define PBC_BASE_ADDRESS 0xEB000000 +#define PBC_BASE_ADDRESS 0xf4300000 #define PBC_REG_ADDR(offset) (void __force __iomem *) \ (PBC_BASE_ADDRESS + (offset)) -- cgit v1.2.2 From 25971dfe3a9d14c3b91fc51de96d7f48da394c99 Mon Sep 17 00:00:00 2001 From: Magnus Lilja Date: Sat, 18 Apr 2009 18:20:50 +0200 Subject: i.MX31: Disable CPU_32v6K in mx3_defconfig. The i.MX31 ARM11 core is not a v6K core. Disable this option as it is incompatible with non v6K cores. Signed-off-by: Magnus Lilja Signed-off-by: Sascha Hauer --- arch/arm/configs/mx3_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig index 72a8201a5370..20ada526f6de 100644 --- a/arch/arm/configs/mx3_defconfig +++ b/arch/arm/configs/mx3_defconfig @@ -197,7 +197,7 @@ CONFIG_MXC_PWM=y # CONFIG_CPU_32=y CONFIG_CPU_V6=y -CONFIG_CPU_32v6K=y +# CONFIG_CPU_32v6K is not set CONFIG_CPU_32v6=y CONFIG_CPU_ABRT_EV6=y CONFIG_CPU_PABRT_NOIFAR=y -- cgit v1.2.2 From 0692698cb7369ea1ce74f3f87f70baf5072f8a37 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 5 May 2009 13:57:52 +0100 Subject: [IA64] xen_domu_defconfig: fix build issues/warnings - drivers/xen/events.c did not compile - xen_setup_hook caused a modpost section warning - the use of u64 (instead of unsigned long long) together with a %llu in drivers/xen/balloon.c caused a compiler warning Signed-off-by: Jan Beulich Signed-off-by: Tony Luck --- arch/ia64/include/asm/idle.h | 7 +++++++ arch/ia64/include/asm/xen/events.h | 7 +------ arch/ia64/xen/xensetup.S | 2 -- 3 files changed, 8 insertions(+), 8 deletions(-) create mode 100644 arch/ia64/include/asm/idle.h (limited to 'arch') diff --git a/arch/ia64/include/asm/idle.h b/arch/ia64/include/asm/idle.h new file mode 100644 index 000000000000..b7685015a8ba --- /dev/null +++ b/arch/ia64/include/asm/idle.h @@ -0,0 +1,7 @@ +#ifndef _ASM_IA64_IDLE_H +#define _ASM_IA64_IDLE_H + +static inline void enter_idle(void) { } +static inline void exit_idle(void) { } + +#endif /* _ASM_IA64_IDLE_H */ diff --git a/arch/ia64/include/asm/xen/events.h b/arch/ia64/include/asm/xen/events.h index 73248781fba8..b8370c8b6198 100644 --- a/arch/ia64/include/asm/xen/events.h +++ b/arch/ia64/include/asm/xen/events.h @@ -36,14 +36,9 @@ static inline int xen_irqs_disabled(struct pt_regs *regs) return !(ia64_psr(regs)->i); } -static inline void xen_do_IRQ(int irq, struct pt_regs *regs) +static inline void handle_irq(int irq, struct pt_regs *regs) { - struct pt_regs *old_regs; - old_regs = set_irq_regs(regs); - irq_enter(); __do_IRQ(irq); - irq_exit(); - set_irq_regs(old_regs); } #define irq_ctx_init(cpu) do { } while (0) diff --git a/arch/ia64/xen/xensetup.S b/arch/ia64/xen/xensetup.S index 28fed1fcc079..aff8346ea193 100644 --- a/arch/ia64/xen/xensetup.S +++ b/arch/ia64/xen/xensetup.S @@ -54,8 +54,6 @@ END(startup_xen) #define isBP p3 // are we the Bootstrap Processor? - .text - GLOBAL_ENTRY(xen_setup_hook) mov r8=XEN_PV_DOMAIN_ASM (isBP) movl r9=xen_domain_type;; -- cgit v1.2.2 From 7eccf7b227b6d3b1745b937ce35efc9c27f9b0e5 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Tue, 5 May 2009 12:50:02 -0700 Subject: x86, srat: do not register nodes beyond e820 map The mem= option will truncate the memory map at a specified address so it's not possible to register nodes with memory beyond the e820 upper bound. unparse_node() is only called when then node had memory associated with it, although with the mem= option it is no longer addressable. [ Impact: fix boot hang on certain (large) systems ] Reported-by: "Zhang, Yanmin" Signed-off-by: David Rientjes Acked-by: Jack Steiner LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/mm/srat_64.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 33c5fa57e43d..01765955baaf 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -361,6 +361,7 @@ static void __init unparse_node(int node) { int i; node_clear(node, nodes_parsed); + node_clear(node, cpu_nodes_parsed); for (i = 0; i < MAX_LOCAL_APIC; i++) { if (apicid_to_node[i] == node) apicid_to_node[i] = NUMA_NO_NODE; -- cgit v1.2.2 From e0e5ea3268db428d19e1c5fa00e6f583861cbdbd Mon Sep 17 00:00:00 2001 From: Nikanth Karthikesan Date: Mon, 4 May 2009 09:08:26 +0530 Subject: x86: Fix a typo in a printk message [ Impact: printk message cleanup ] Signed-off-by: Nikanth Karthikesan LKML-Reference: <200905040908.27299.knikanth@suse.de> Signed-off-by: Ingo Molnar --- arch/x86/mm/srat_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c index 16ae70fc57e7..29a0e37114f8 100644 --- a/arch/x86/mm/srat_32.c +++ b/arch/x86/mm/srat_32.c @@ -216,7 +216,7 @@ int __init get_memcfg_from_srat(void) if (num_memory_chunks == 0) { printk(KERN_WARNING - "could not finy any ACPI SRAT memory areas.\n"); + "could not find any ACPI SRAT memory areas.\n"); goto out_fail; } -- cgit v1.2.2 From a029b706d3b2d3a139bdeae84131d9a0f35f6478 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 7 May 2009 14:25:48 +0100 Subject: [ARM] 5506/1: davinci: DMA_32BIT_MASK --> DMA_BIT_MASK(32) As per commit 284901a90a9e0b812ca3f5f852cbbfb60d10249d, use DMA_BIT_MASK(n) Signed-off-by: Kevin Hilman Signed-off-by: Russell King --- arch/arm/mach-davinci/board-dm644x-evm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index c039674fe99e..b2e7f9c63bc5 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -211,7 +211,7 @@ static struct resource ide_resources[] = { }, }; -static u64 ide_dma_mask = DMA_32BIT_MASK; +static u64 ide_dma_mask = DMA_BIT_MASK(32); static struct platform_device ide_dev = { .name = "palm_bk3710", @@ -220,7 +220,7 @@ static struct platform_device ide_dev = { .num_resources = ARRAY_SIZE(ide_resources), .dev = { .dma_mask = &ide_dma_mask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), }, }; -- cgit v1.2.2 From ae51e609843f7d0aaeb1c2ad9f89d252a4899885 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Thu, 7 May 2009 16:18:40 +0100 Subject: [ARM] 5507/1: support R_ARM_MOVW_ABS_NC and MOVT_ABS relocation types From: Bruce Ashfield To fully support the armv7-a instruction set/optimizations, support for the R_ARM_MOVW_ABS_NC and R_ARM_MOVT_ABS relocation types is required. The MOVW and MOVT are both load-immediate instructions, MOVW loads 16 bits into the bottom half of a register, and MOVT loads 16 bits into the top half of a register. The relocation information for these instructions has a full 32 bit value, plus an addend which is stored in the 16 immediate bits in the instruction itself. The immediate bits in the instruction are not contiguous (the register # splits it into a 4 bit and 12 bit value), so the addend has to be extracted accordingly and added to the value. The value is then split and put into the instruction; a MOVW uses the bottom 16 bits of the value, and a MOVT uses the top 16 bits. Signed-off-by: David Borman Signed-off-by: Bruce Ashfield Signed-off-by: Paul Gortmaker Signed-off-by: Russell King --- arch/arm/include/asm/elf.h | 16 +++++++++------- arch/arm/kernel/module.c | 15 +++++++++++++++ 2 files changed, 24 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index d7da19bcf928..c207504de84d 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -45,13 +45,15 @@ typedef struct user_fp elf_fpregset_t; #define EF_ARM_HASENTRY 0x00000002 /* All */ #define EF_ARM_RELEXEC 0x00000001 /* All */ -#define R_ARM_NONE 0 -#define R_ARM_PC24 1 -#define R_ARM_ABS32 2 -#define R_ARM_CALL 28 -#define R_ARM_JUMP24 29 -#define R_ARM_V4BX 40 -#define R_ARM_PREL31 42 +#define R_ARM_NONE 0 +#define R_ARM_PC24 1 +#define R_ARM_ABS32 2 +#define R_ARM_CALL 28 +#define R_ARM_JUMP24 29 +#define R_ARM_V4BX 40 +#define R_ARM_PREL31 42 +#define R_ARM_MOVW_ABS_NC 43 +#define R_ARM_MOVT_ABS 44 /* * These are used to set parameters in the core dumps. diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index d1731e39b496..bac03c81489d 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -169,6 +169,21 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, *(u32 *)loc = offset & 0x7fffffff; break; + case R_ARM_MOVW_ABS_NC: + case R_ARM_MOVT_ABS: + offset = *(u32 *)loc; + offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff); + offset = (offset ^ 0x8000) - 0x8000; + + offset += sym->st_value; + if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS) + offset >>= 16; + + *(u32 *)loc &= 0xfff0f000; + *(u32 *)loc |= ((offset & 0xf000) << 4) | + (offset & 0x0fff); + break; + default: printk(KERN_ERR "%s: unknown relocation: %u\n", module->name, ELF32_R_TYPE(rel->r_info)); -- cgit v1.2.2 From d3584183d2f40f40371e288ceef187d04da213b5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 7 May 2009 15:36:13 -0700 Subject: sparc64: Fix SET_PERSONALITY to not clip bits outside of PER_MASK. Signed-off-by: David S. Miller --- arch/sparc/include/asm/elf_64.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc/include/asm/elf_64.h b/arch/sparc/include/asm/elf_64.h index 425c2f9be6d5..d42e393078c4 100644 --- a/arch/sparc/include/asm/elf_64.h +++ b/arch/sparc/include/asm/elf_64.h @@ -208,8 +208,9 @@ do { unsigned long new_flags = current_thread_info()->flags; \ else \ clear_thread_flag(TIF_ABI_PENDING); \ /* flush_thread will update pgd cache */ \ - if (current->personality != PER_LINUX32) \ - set_personality(PER_LINUX); \ + if (personality(current->personality) != PER_LINUX32) \ + set_personality(PER_LINUX | \ + (current->personality & (~PER_MASK))); \ } while (0) #endif /* !(__ASM_SPARC64_ELF_H) */ -- cgit v1.2.2 From 61438766514a2d7f191ce1b3cf6812eabbef4ef7 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 6 May 2009 13:02:19 +0100 Subject: x86: fix boot hang in early_reserve_e820() If the first non-reserved (sub-)range doesn't fit the size requested, an endless loop will be entered. If a range returned from find_e820_area_size() turns out insufficient in size, the range must be skipped before calling the function again. [ Impact: fixes boot hang on some platforms ] Signed-off-by: Jan Beulich Signed-off-by: H. Peter Anvin --- arch/x86/kernel/e820.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index ef2c3563357d..006281302925 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -1074,12 +1074,13 @@ u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align) u64 addr; u64 start; - start = startt; - while (size < sizet && (start + 1)) + for (start = startt; ; start += size) { start = find_e820_area_size(start, &size, align); - - if (size < sizet) - return 0; + if (!(start + 1)) + return 0; + if (size >= sizet) + break; + } #ifdef CONFIG_X86_32 if (start >= MAXMEM) -- cgit v1.2.2 From 498343967613183611ac37dccb2846496d954c06 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 6 May 2009 13:06:47 +0100 Subject: x86-64: finish cleanup_highmaps()'s job wrt. _brk_end With the introduction of the .brk section, special care must be taken that no unused page table entries remain if _brk_end and _end are separated by a 2M page boundary. cleanup_highmap() runs very early and hence cannot take care of that, hence potential entries needing to be removed past _brk_end must be cleared once the brk allocator has done its job. [ Impact: avoids undesirable TLB aliases ] Signed-off-by: Jan Beulich Signed-off-by: H. Peter Anvin --- arch/x86/mm/init.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index fd3da1dda1c9..ae4f7b5d7104 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -7,6 +7,7 @@ #include #include #include +#include #include #include @@ -304,8 +305,23 @@ unsigned long __init_refok init_memory_mapping(unsigned long start, #endif #ifdef CONFIG_X86_64 - if (!after_bootmem) + if (!after_bootmem && !start) { + pud_t *pud; + pmd_t *pmd; + mmu_cr4_features = read_cr4(); + + /* + * _brk_end cannot change anymore, but it and _end may be + * located on different 2M pages. cleanup_highmap(), however, + * can only consider _end when it runs, so destroy any + * mappings beyond _brk_end here. + */ + pud = pud_offset(pgd_offset_k(_brk_end), _brk_end); + pmd = pmd_offset(pud, _brk_end - 1); + while (++pmd <= pmd_offset(pud, (unsigned long)_end - 1)) + pmd_clear(pmd); + } #endif __flush_tlb_all(); -- cgit v1.2.2 From 6407df5ca54a511054200a1eb23f78f723ca1de4 Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Fri, 8 May 2009 10:51:41 +0800 Subject: x86, kexec: fix crashdump panic with CONFIG_KEXEC_JUMP Tim Starling reported that crashdump will panic with kernel compiled with CONFIG_KEXEC_JUMP due to null pointer deference in machine_kexec_32.c: machine_kexec(), when deferencing kexec_image. Refering to: http://bugzilla.kernel.org/show_bug.cgi?id=13265 This patch fixes the BUG via replacing global variable reference: kexec_image in machine_kexec() with local variable reference: image, which is more appropriate, and will not be null. Same BUG is in machine_kexec_64.c too, so fixed too in the same way. [ Impact: fix crash on kexec ] Reported-by: Tim Starling Signed-off-by: Huang Ying LKML-Reference: <1241751101.6259.85.camel@yhuang-dev.sh.intel.com> Signed-off-by: H. Peter Anvin --- arch/x86/kernel/machine_kexec_32.c | 4 ++-- arch/x86/kernel/machine_kexec_64.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c index e7368c1da01d..c1c429d00130 100644 --- a/arch/x86/kernel/machine_kexec_32.c +++ b/arch/x86/kernel/machine_kexec_32.c @@ -194,7 +194,7 @@ void machine_kexec(struct kimage *image) unsigned int preserve_context); #ifdef CONFIG_KEXEC_JUMP - if (kexec_image->preserve_context) + if (image->preserve_context) save_processor_state(); #endif @@ -253,7 +253,7 @@ void machine_kexec(struct kimage *image) image->preserve_context); #ifdef CONFIG_KEXEC_JUMP - if (kexec_image->preserve_context) + if (image->preserve_context) restore_processor_state(); #endif diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c index 89cea4d44679..84c3bf209e98 100644 --- a/arch/x86/kernel/machine_kexec_64.c +++ b/arch/x86/kernel/machine_kexec_64.c @@ -274,7 +274,7 @@ void machine_kexec(struct kimage *image) int save_ftrace_enabled; #ifdef CONFIG_KEXEC_JUMP - if (kexec_image->preserve_context) + if (image->preserve_context) save_processor_state(); #endif @@ -333,7 +333,7 @@ void machine_kexec(struct kimage *image) image->preserve_context); #ifdef CONFIG_KEXEC_JUMP - if (kexec_image->preserve_context) + if (image->preserve_context) restore_processor_state(); #endif -- cgit v1.2.2 From 33df4db04a79660150e1948e3296eeb451ac121b Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Thu, 7 May 2009 11:56:44 -0700 Subject: x86: xen, i386: reserve Xen pagetables The Xen pagetables are no longer implicitly reserved as part of the other i386_start_kernel reservations, so make sure we explicitly reserve them. This prevents them from being released into the general kernel free page pool and reused. [ Impact: fix Xen guest crash ] Also-Bisected-by: Bryan Donlan Signed-off-by: Jeremy Fitzhardinge Cc: Xen-devel Cc: Linus Torvalds LKML-Reference: <4A032EEC.30509@goop.org> Signed-off-by: Ingo Molnar --- arch/x86/xen/mmu.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 9842b1212407..e25a78e1113a 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1794,6 +1794,11 @@ __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(swapper_pg_dir))); + reserve_early(__pa(xen_start_info->pt_base), + __pa(xen_start_info->pt_base + + xen_start_info->nr_pt_frames * PAGE_SIZE), + "XEN PAGETABLES"); + return swapper_pg_dir; } #endif /* CONFIG_X86_64 */ -- cgit v1.2.2 From e5299926d7459d9fa7c7f856983147817aedb10e Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto Date: Fri, 8 May 2009 17:28:40 +0900 Subject: x86: MCE: make cmci_discover_lock irq-safe Lockdep reports the warning below when Li tries to offline one cpu: [ 110.835487] ================================= [ 110.835616] [ INFO: inconsistent lock state ] [ 110.835688] 2.6.30-rc4-00336-g8c9ed89 #52 [ 110.835757] --------------------------------- [ 110.835828] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. [ 110.835908] swapper/0 [HC1[1]:SC0[0]:HE0:SE1] takes: [ 110.835982] (cmci_discover_lock){?.+...}, at: [] cmci_clear+0x30/0x9b cmci_clear() can be called via smp_call_function_single(). It is better to disable interrupt while holding cmci_discover_lock, to turn it into an irq-safe lock - we can deadlock otherwise. [ Impact: fix possible deadlock in the MCE code ] Reported-by: Shaohua Li Signed-off-by: Hidetoshi Seto Cc: Andi Kleen Cc: Andrew Morton LKML-Reference: <4A03ED38.8000700@jp.fujitsu.com> Signed-off-by: Ingo Molnar Reported-by: Shaohua Li --- arch/x86/kernel/cpu/mcheck/mce_intel_64.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c index d6b72df89d69..cef3ee30744b 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c @@ -151,10 +151,11 @@ static void print_update(char *type, int *hdr, int num) static void cmci_discover(int banks, int boot) { unsigned long *owned = (void *)&__get_cpu_var(mce_banks_owned); + unsigned long flags; int hdr = 0; int i; - spin_lock(&cmci_discover_lock); + spin_lock_irqsave(&cmci_discover_lock, flags); for (i = 0; i < banks; i++) { u64 val; @@ -184,7 +185,7 @@ static void cmci_discover(int banks, int boot) WARN_ON(!test_bit(i, __get_cpu_var(mce_poll_banks))); } } - spin_unlock(&cmci_discover_lock); + spin_unlock_irqrestore(&cmci_discover_lock, flags); if (hdr) printk(KERN_CONT "\n"); } @@ -211,13 +212,14 @@ void cmci_recheck(void) */ void cmci_clear(void) { + unsigned long flags; int i; int banks; u64 val; if (!cmci_supported(&banks)) return; - spin_lock(&cmci_discover_lock); + spin_lock_irqsave(&cmci_discover_lock, flags); for (i = 0; i < banks; i++) { if (!test_bit(i, __get_cpu_var(mce_banks_owned))) continue; @@ -227,7 +229,7 @@ void cmci_clear(void) wrmsrl(MSR_IA32_MC0_CTL2 + i, val); __clear_bit(i, __get_cpu_var(mce_banks_owned)); } - spin_unlock(&cmci_discover_lock); + spin_unlock_irqrestore(&cmci_discover_lock, flags); } /* -- cgit v1.2.2 From cbec415991c0007f5c78fad76294373e8ac2d59a Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Fri, 1 May 2009 02:27:45 +0400 Subject: powerpc/fsl_soc: Remove mpc83xx_wdt_init, again commit b31a1d8b41513b96e9c7ec2f68c5734cef0b26a4 ("gianfar: Convert gianfar to an of_platform_driver"), possibly due merge issues, reintroduced completely unneded mpc83xx_wdt_init call, which I removed some time ago in commit 20d38e01d48019c578ab0ec1464454c0 ("powerpc/fsl_soc: remove mpc83xx_wdt code"). Remove it once again. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/fsl_soc.c | 46 ------------------------------------------- 1 file changed, 46 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index afe8dbc964aa..5c64ccd402e2 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -208,52 +208,6 @@ static int __init of_add_fixed_phys(void) arch_initcall(of_add_fixed_phys); #endif /* CONFIG_FIXED_PHY */ -#ifdef CONFIG_PPC_83xx -static int __init mpc83xx_wdt_init(void) -{ - struct resource r; - struct device_node *np; - struct platform_device *dev; - u32 freq = fsl_get_sys_freq(); - int ret; - - np = of_find_compatible_node(NULL, "watchdog", "mpc83xx_wdt"); - - if (!np) { - ret = -ENODEV; - goto nodev; - } - - memset(&r, 0, sizeof(r)); - - ret = of_address_to_resource(np, 0, &r); - if (ret) - goto err; - - dev = platform_device_register_simple("mpc83xx_wdt", 0, &r, 1); - if (IS_ERR(dev)) { - ret = PTR_ERR(dev); - goto err; - } - - ret = platform_device_add_data(dev, &freq, sizeof(freq)); - if (ret) - goto unreg; - - of_node_put(np); - return 0; - -unreg: - platform_device_unregister(dev); -err: - of_node_put(np); -nodev: - return ret; -} - -arch_initcall(mpc83xx_wdt_init); -#endif - static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type) { if (!phy_type) -- cgit v1.2.2 From 3ba8c7920552865a338e00512715786b54db4da0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Tue, 28 Apr 2009 14:54:07 +0200 Subject: IXP4xx: use "ENODEV" instead of "ENOSYS" in module initialization. ENOSYS makes modutils complain about missing kernel module support. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- arch/arm/mach-ixp4xx/ixp4xx_npe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c index 252310234903..7bb8e778e4b6 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c @@ -714,7 +714,7 @@ static int __init npe_init_module(void) } if (!found) - return -ENOSYS; + return -ENODEV; return 0; } -- cgit v1.2.2 From b74d446f1f337e3fe906169a3266cb65ffa4179e Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sat, 9 May 2009 15:35:10 +0600 Subject: x86: Fix false positive section mismatch warnings in the apic code [ Impact: reduce kernel image size a bit, annotate away warnings ] Signed-off-by: Sam Ravnborg [ modified and tested it ] Signed-off-by: Rakib Mullick Cc: Marcin Slusarz LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/es7000_32.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c index 1c11b819f245..302947775575 100644 --- a/arch/x86/kernel/apic/es7000_32.c +++ b/arch/x86/kernel/apic/es7000_32.c @@ -254,7 +254,7 @@ static int parse_unisys_oem(char *oemptr) } #ifdef CONFIG_ACPI -static int find_unisys_acpi_oem_table(unsigned long *oem_addr) +static int __init find_unisys_acpi_oem_table(unsigned long *oem_addr) { struct acpi_table_header *header = NULL; struct es7000_oem_table *table; @@ -285,7 +285,7 @@ static int find_unisys_acpi_oem_table(unsigned long *oem_addr) return 0; } -static void unmap_unisys_acpi_oem_table(unsigned long oem_addr) +static void __init unmap_unisys_acpi_oem_table(unsigned long oem_addr) { if (!oem_addr) return; @@ -306,7 +306,7 @@ static int es7000_check_dsdt(void) static int es7000_acpi_ret; /* Hook from generic ACPI tables.c */ -static int es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id) { unsigned long oem_addr = 0; int check_dsdt; @@ -717,7 +717,7 @@ struct apic apic_es7000_cluster = { .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, }; -struct apic apic_es7000 = { +struct apic __refdata apic_es7000 = { .name = "es7000", .probe = probe_es7000, -- cgit v1.2.2 From 19bca6ab75d8118ae970fcc656359ddb467ac763 Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Tue, 28 Apr 2009 12:45:30 +0200 Subject: KVM: SVM: Fix cross vendor migration issue with unusable bit AMDs VMCB does not have an explicit unusable segment descriptor field, so we emulate it by using "not present". This has to be setup before the fixups, because this field is used there. Signed-off-by: Andre Przywara Signed-off-by: Avi Kivity --- arch/x86/kvm/svm.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 1821c2078199..9184e32778ab 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -796,6 +796,11 @@ static void svm_get_segment(struct kvm_vcpu *vcpu, var->db = (s->attrib >> SVM_SELECTOR_DB_SHIFT) & 1; var->g = (s->attrib >> SVM_SELECTOR_G_SHIFT) & 1; + /* AMD's VMCB does not have an explicit unusable field, so emulate it + * for cross vendor migration purposes by "not present" + */ + var->unusable = !var->present || (var->type == 0); + switch (seg) { case VCPU_SREG_CS: /* @@ -827,8 +832,6 @@ static void svm_get_segment(struct kvm_vcpu *vcpu, var->type |= 0x1; break; } - - var->unusable = !var->present; } static int svm_get_cpl(struct kvm_vcpu *vcpu) -- cgit v1.2.2 From 334b8ad7b182fc14d720acd7729afda3ab4c7e3a Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Sun, 3 May 2009 16:34:21 +0300 Subject: KVM: Fix NX support reporting NX support is bit 20, not bit 1. Signed-off-by: Avi Kivity --- arch/x86/kvm/x86.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 7c1ce5ac6131..834a7bf25e48 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -1259,7 +1259,7 @@ static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function, bit(X86_FEATURE_CMOV) | bit(X86_FEATURE_PSE36) | bit(X86_FEATURE_MMX) | bit(X86_FEATURE_FXSR) | bit(X86_FEATURE_SYSCALL) | - (bit(X86_FEATURE_NX) && is_efer_nx()) | + (is_efer_nx() ? bit(X86_FEATURE_NX) : 0) | #ifdef CONFIG_X86_64 bit(X86_FEATURE_LM) | #endif -- cgit v1.2.2 From e286e86e6d2042d67d09244aa0e05ffef75c9d54 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Sun, 3 May 2009 18:50:55 +0300 Subject: KVM: Make EFER reads safe when EFER does not exist Some processors don't have EFER; don't oops if userspace wants us to read EFER when we check NX. Cc: stable@kernel.org Signed-off-by: Avi Kivity --- arch/x86/kvm/x86.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 834a7bf25e48..49079a46687b 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -1121,9 +1121,9 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu) static int is_efer_nx(void) { - u64 efer; + unsigned long long efer = 0; - rdmsrl(MSR_EFER, efer); + rdmsrl_safe(MSR_EFER, &efer); return efer & EFER_NX; } -- cgit v1.2.2 From 917a0153621572e88aeb2d5df025ad2e81027287 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 6 May 2009 21:36:16 -0700 Subject: x86: mtrr: Fix high_width computation when phys-addr is >= 44bit found one system where cpu address line is 44bits, mtrr printout is not right: [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0 00000000 mask FF0 00000000 write-back [ 0.000000] 1 base 10 00000000 mask FFF 80000000 write-back [ 0.000000] 2 base 0 80000000 mask FFF 80000000 uncachable [ 0.000000] 3 base 0 7F800000 mask FFF FF800000 uncachable Li Zefan and Frederic pointed out the high_width could be -4 some how. It turns out when phys_addr is 44bit, size_or_mask will be ffffffff,00000000 so ffs(size_or_mask) will be 0. Try to check low 32 bit, to get correct high_width. Signed-off-by: Yinghai Lu Also-analyzed-by: Frederic Weisbecker Also-analyzed-by: Li Zefan Cc: Jeremy Fitzhardinge Cc: Zhaolei Cc: Steven Rostedt Cc: Vegard Nossum Cc: Andrew Morton LKML-Reference: <4A026540.8060504@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mtrr/generic.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index 0b776c09aff3..d21d4fb161f7 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -275,7 +275,11 @@ static void __init print_mtrr_state(void) } printk(KERN_DEBUG "MTRR variable ranges %sabled:\n", mtrr_state.enabled & 2 ? "en" : "dis"); - high_width = ((size_or_mask ? ffs(size_or_mask) - 1 : 32) - (32 - PAGE_SHIFT) + 3) / 4; + if (size_or_mask & 0xffffffffUL) + high_width = ffs(size_or_mask & 0xffffffffUL) - 1; + else + high_width = ffs(size_or_mask>>32) + 32 - 1; + high_width = (high_width - (32 - PAGE_SHIFT) + 3) / 4; for (i = 0; i < num_var_ranges; ++i) { if (mtrr_state.var_ranges[i].mask_lo & (1 << 11)) printk(KERN_DEBUG " %u base %0*X%05X000 mask %0*X%05X000 %s\n", -- cgit v1.2.2 From 99f85a28a78e96d28907fe036e1671a218fee597 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Mon, 11 May 2009 14:21:10 +0300 Subject: KVM: SVM: Remove port 80 passthrough MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit KVM optimizes guest port 80 accesses by passthing them through to the host. Some AMD machines die on port 80 writes, allowing the guest to hard-lock the host. Remove the port passthrough to avoid the problem. Cc: stable@kernel.org Reported-by: Piotr Jaroszyński Tested-by: Piotr Jaroszyński Signed-off-by: Avi Kivity --- arch/x86/kvm/svm.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 9184e32778ab..1f8510c51d6e 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -411,7 +411,6 @@ static __init int svm_hardware_setup(void) iopm_va = page_address(iopm_pages); memset(iopm_va, 0xff, PAGE_SIZE * (1 << IOPM_ALLOC_ORDER)); - clear_bit(0x80, iopm_va); /* allow direct access to PC debug port */ iopm_base = page_to_pfn(iopm_pages) << PAGE_SHIFT; if (boot_cpu_has(X86_FEATURE_NX)) -- cgit v1.2.2 From 3c598766a2bae1b208470e7cc934ac462561e3cb Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 11 May 2009 16:49:28 +0100 Subject: x86: fix percpu_{to,from}_op() - the byte operand constraints were wrong for 32-bit - the to-op's input operands weren't properly parenthesized [ Impact: fix possible miscompilation or build failure ] Signed-off-by: Jan Beulich Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/percpu.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index aee103b26d01..02ecb30982a3 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -82,22 +82,22 @@ do { \ case 1: \ asm(op "b %1,"__percpu_arg(0) \ : "+m" (var) \ - : "ri" ((T__)val)); \ + : "qi" ((T__)(val))); \ break; \ case 2: \ asm(op "w %1,"__percpu_arg(0) \ : "+m" (var) \ - : "ri" ((T__)val)); \ + : "ri" ((T__)(val))); \ break; \ case 4: \ asm(op "l %1,"__percpu_arg(0) \ : "+m" (var) \ - : "ri" ((T__)val)); \ + : "ri" ((T__)(val))); \ break; \ case 8: \ asm(op "q %1,"__percpu_arg(0) \ : "+m" (var) \ - : "re" ((T__)val)); \ + : "re" ((T__)(val))); \ break; \ default: __bad_percpu_size(); \ } \ @@ -109,7 +109,7 @@ do { \ switch (sizeof(var)) { \ case 1: \ asm(op "b "__percpu_arg(1)",%0" \ - : "=r" (ret__) \ + : "=q" (ret__) \ : "m" (var)); \ break; \ case 2: \ -- cgit v1.2.2 From 72af2b363107df9cd67985ecb8495bbdff3c9857 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Mon, 11 May 2009 09:58:19 -0700 Subject: ARM: OMAP: Fix printing of reserved memory for frambuffer Print reserved memory only if it was actually reserved. Signed-off-by: Tomi Valkeinen Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/fb.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index ce6b4baeedec..3746222bed10 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -206,9 +206,10 @@ void __init omapfb_reserve_sdram(void) config_invalid = 1; return; } - if (rg.paddr) + if (rg.paddr) { reserve_bootmem(rg.paddr, rg.size, BOOTMEM_DEFAULT); - reserved += rg.size; + reserved += rg.size; + } omapfb_config.mem_desc.region[i] = rg; configured_regions++; } -- cgit v1.2.2 From 7b6c6c77732ca1d2498eda7eabb64f9648896e96 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Mon, 11 May 2009 17:03:00 -0400 Subject: x86, 32-bit: fix kernel_trap_sp() Use ®s->sp instead of regs for getting the top of stack in kernel mode. (on x86-64, regs->sp always points the top of stack) [ Impact: Oprofile decodes only stack for backtracing on i386 ] Signed-off-by: Masami Hiramatsu [ v2: rename the API to kernel_stack_pointer(), move variable inside ] Acked-by: Linus Torvalds Cc: systemtap@sources.redhat.com Cc: Harvey Harrison Cc: Jan Blunck Cc: Christoph Hellwig LKML-Reference: <20090511210300.17332.67549.stgit@localhost.localdomain> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/ptrace.h | 7 ++++--- arch/x86/oprofile/backtrace.c | 2 +- 2 files changed, 5 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h index e304b66abeea..624f133943ed 100644 --- a/arch/x86/include/asm/ptrace.h +++ b/arch/x86/include/asm/ptrace.h @@ -187,14 +187,15 @@ static inline int v8086_mode(struct pt_regs *regs) /* * X86_32 CPUs don't save ss and esp if the CPU is already in kernel mode - * when it traps. So regs will be the current sp. + * when it traps. The previous stack will be directly underneath the saved + * registers, and 'sp/ss' won't even have been saved. Thus the '®s->sp'. * * This is valid only for kernel mode traps. */ -static inline unsigned long kernel_trap_sp(struct pt_regs *regs) +static inline unsigned long kernel_stack_pointer(struct pt_regs *regs) { #ifdef CONFIG_X86_32 - return (unsigned long)regs; + return (unsigned long)(®s->sp); #else return regs->sp; #endif diff --git a/arch/x86/oprofile/backtrace.c b/arch/x86/oprofile/backtrace.c index 04df67f8a7ba..044897be021f 100644 --- a/arch/x86/oprofile/backtrace.c +++ b/arch/x86/oprofile/backtrace.c @@ -76,9 +76,9 @@ void x86_backtrace(struct pt_regs * const regs, unsigned int depth) { struct frame_head *head = (struct frame_head *)frame_pointer(regs); - unsigned long stack = kernel_trap_sp(regs); if (!user_mode_vm(regs)) { + unsigned long stack = kernel_stack_pointer(regs); if (depth) dump_trace(NULL, regs, (unsigned long *)stack, 0, &backtrace_ops, &depth); -- cgit v1.2.2 From 35e71f90687fd904b43e3427673827ac3e77b4d1 Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Thu, 16 Apr 2009 00:25:39 -0700 Subject: xtensa: Fix architecture specific Kconfig Move a misplace endmenu marker to enable platform options and disable PCI and automatic calibrating for the XT2K board. The on-board PCI bridge is somewhat broken, anyway, and the calibrating relies on some whacky usage of the serial port. Signed-off-by: Chris Zankel --- arch/xtensa/Kconfig | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index fa6dc4dd3b19..30d21a9e2ef5 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -137,6 +137,8 @@ config PCI source "drivers/pci/Kconfig" +endmenu + menu "Platform options" choice @@ -153,8 +155,6 @@ config XTENSA_PLATFORM_ISS config XTENSA_PLATFORM_XT2000 bool "XT2000" - select XTENSA_CALIBRATE_CCOUNT - select PCI help XT2000 is the name of Tensilica's feature-rich emulation platform. This hardware is capable of running a full Linux distribution. @@ -192,8 +192,6 @@ config CMDLINE source "mm/Kconfig" -endmenu - config HOTPLUG bool "Support for hot-pluggable devices" help -- cgit v1.2.2 From 7dbe5c542464a511f0ea6a14e3ff08874d7e21d5 Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Thu, 16 Apr 2009 00:28:09 -0700 Subject: xtensa: Fix checksum header file We need to add a "memory" dependency (barrier) in assembly macros that access (read or write) memory. Otherwise, the compiler might ill-optimize the order of memory accesses. Signed-off-by: Chris Zankel --- arch/xtensa/include/asm/checksum.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/xtensa/include/asm/checksum.h b/arch/xtensa/include/asm/checksum.h index f84d3f00774a..e4d831a30772 100644 --- a/arch/xtensa/include/asm/checksum.h +++ b/arch/xtensa/include/asm/checksum.h @@ -113,7 +113,8 @@ static __inline__ __sum16 ip_fast_csum(const void *iph, unsigned int ihl) are modified, we must also specify them as outputs, or gcc will assume they contain their original values. */ : "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (tmp), "=&r" (endaddr) - : "1" (iph), "2" (ihl)); + : "1" (iph), "2" (ihl) + : "memory"); return csum_fold(sum); } @@ -227,7 +228,8 @@ static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr, "1:\t" : "=r" (sum), "=&r" (__dummy) : "r" (saddr), "r" (daddr), - "r" (htonl(len)), "r" (htonl(proto)), "0" (sum)); + "r" (htonl(len)), "r" (htonl(proto)), "0" (sum) + : "memory"); return csum_fold(sum); } -- cgit v1.2.2 From 586411dcd1935f91796d5e8a29aa3cfdf01a01f4 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Mon, 11 May 2009 15:43:33 +0200 Subject: xtensa: always use correct stack pointer for stack traces Commit '28a0ce7 xtensa: use correct stack pointer for stack traces' changed the stack tracer from always reading the stack pointer register to always using the saved value in the task descriptor. The author was too dense to consider the fact that the saved stack value is stale for a running process und thus unusable for 'current'. What we do now is to use the stack pointer register (a1) for when the task is unknown - we can't help it then - or when the task is 'current'. For everything else use the saved stack pointer value contained in the task descriptor. Signed-off-by: Johannes Weiner Signed-off-by: Chris Zankel --- arch/xtensa/kernel/traps.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c index 9f0b71189e94..ba9ab9349782 100644 --- a/arch/xtensa/kernel/traps.c +++ b/arch/xtensa/kernel/traps.c @@ -369,6 +369,18 @@ void show_regs(struct pt_regs * regs) regs->syscall); } +static __always_inline unsigned long *stack_pointer(struct task_struct *task) +{ + unsigned long *sp; + + if (!task || task == current) + __asm__ __volatile__ ("mov %0, a1\n" : "=a"(sp)); + else + sp = (unsigned long *)task->thread.sp; + + return sp; +} + void show_trace(struct task_struct *task, unsigned long *sp) { unsigned long a0, a1, pc; @@ -377,7 +389,7 @@ void show_trace(struct task_struct *task, unsigned long *sp) if (sp) a1 = (unsigned long)sp; else - a1 = task->thread.sp; + a1 = (unsigned long)stack_pointer(task); sp_start = a1 & ~(THREAD_SIZE-1); sp_end = sp_start + THREAD_SIZE; @@ -420,7 +432,7 @@ void show_stack(struct task_struct *task, unsigned long *sp) unsigned long *stack; if (!sp) - sp = (unsigned long *)task->thread.sp; + sp = stack_pointer(task); stack = sp; printk("\nStack: "); -- cgit v1.2.2 From 1fb137c1e33cd188b40b3c0d7283412efeeb783f Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Mon, 11 May 2009 15:43:34 +0200 Subject: xtensa: register gpio chip before use Platform initialization sets up the LED heartbeat that is controlled via GPIO. Requesting the GPIO pins fails, however, as the chip is only initialized later by a device_initcall(). Fix this up by exporting the initialization function. Let the platform set up the chip before it starts using it. Signed-off-by: Johannes Weiner Signed-off-by: Chris Zankel --- arch/xtensa/platforms/s6105/setup.c | 3 +++ arch/xtensa/variants/s6000/gpio.c | 3 +-- arch/xtensa/variants/s6000/include/variant/gpio.h | 6 ++++++ 3 files changed, 10 insertions(+), 2 deletions(-) create mode 100644 arch/xtensa/variants/s6000/include/variant/gpio.h (limited to 'arch') diff --git a/arch/xtensa/platforms/s6105/setup.c b/arch/xtensa/platforms/s6105/setup.c index ae041d5027a2..855ddeadc43d 100644 --- a/arch/xtensa/platforms/s6105/setup.c +++ b/arch/xtensa/platforms/s6105/setup.c @@ -10,6 +10,8 @@ #include #include +#include + #include void platform_halt(void) @@ -47,6 +49,7 @@ void __init platform_setup(char **cmdline) void __init platform_init(bp_tag_t *first) { + s6_gpio_init(); gpio_request(GPIO_LED1_NGREEN, "led1_green"); gpio_request(GPIO_LED1_RED, "led1_red"); gpio_direction_output(GPIO_LED1_NGREEN, 1); diff --git a/arch/xtensa/variants/s6000/gpio.c b/arch/xtensa/variants/s6000/gpio.c index 33a8d952934c..79317fdcf14c 100644 --- a/arch/xtensa/variants/s6000/gpio.c +++ b/arch/xtensa/variants/s6000/gpio.c @@ -64,8 +64,7 @@ static struct gpio_chip gpiochip = { .exported = 0, /* no exporting to userspace */ }; -static int gpio_init(void) +int s6_gpio_init(void) { return gpiochip_add(&gpiochip); } -device_initcall(gpio_init); diff --git a/arch/xtensa/variants/s6000/include/variant/gpio.h b/arch/xtensa/variants/s6000/include/variant/gpio.h new file mode 100644 index 000000000000..8327f62167eb --- /dev/null +++ b/arch/xtensa/variants/s6000/include/variant/gpio.h @@ -0,0 +1,6 @@ +#ifndef _XTENSA_VARIANT_S6000_GPIO_H +#define _XTENSA_VARIANT_S6000_GPIO_H + +extern int s6_gpio_init(void); + +#endif /* _XTENSA_VARIANT_S6000_GPIO_H */ -- cgit v1.2.2 From d15f05eb8cc4ad59699c16b8ae834b85c6d39bfe Mon Sep 17 00:00:00 2001 From: Oskar Schirmer Date: Mon, 11 May 2009 15:43:35 +0200 Subject: xtensa: fix wrong extern declaration renamed in code using it The variable ccount_nsec has been renamed to nsec_per_ccount in arch/xtensa/kernel/time.c in 2b8aea74 (2007-08-05), but the fix failed to rename the variable in arch/xtensa/include/asm/timex.h as well. Signed-off-by: Oskar Schirmer Signed-off-by: Chris Zankel --- arch/xtensa/include/asm/timex.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/xtensa/include/asm/timex.h b/arch/xtensa/include/asm/timex.h index b83a8181d448..053bc4272106 100644 --- a/arch/xtensa/include/asm/timex.h +++ b/arch/xtensa/include/asm/timex.h @@ -39,9 +39,9 @@ #ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT extern unsigned long ccount_per_jiffy; -extern unsigned long ccount_nsec; +extern unsigned long nsec_per_ccount; #define CCOUNT_PER_JIFFY ccount_per_jiffy -#define NSEC_PER_CCOUNT ccount_nsec +#define NSEC_PER_CCOUNT nsec_per_ccount #else #define CCOUNT_PER_JIFFY (CONFIG_XTENSA_CPU_CLOCK*(1000000UL/HZ)) #define NSEC_PER_CCOUNT (1000UL / CONFIG_XTENSA_CPU_CLOCK) -- cgit v1.2.2 From b070a03f6490b0ac8d95c51b55a64e433d9160ab Mon Sep 17 00:00:00 2001 From: Oskar Schirmer Date: Mon, 11 May 2009 15:43:36 +0200 Subject: xtensa: implement ccount calibration for s6000 Calculate core frequency from timers at boot time instead of assuming a fixed frequency. This is useful as the true frequency is set up by the boot loader, thus variable. Signed-off-by: Oskar Schirmer Signed-off-by: Chris Zankel --- arch/xtensa/Kconfig | 1 + arch/xtensa/variants/s6000/Makefile | 1 + arch/xtensa/variants/s6000/delay.c | 27 +++++++++++++++++++++++++++ 3 files changed, 29 insertions(+) create mode 100644 arch/xtensa/variants/s6000/delay.c (limited to 'arch') diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index 30d21a9e2ef5..ebe228d02b08 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -80,6 +80,7 @@ config XTENSA_VARIANT_S6000 bool "s6000 - Stretch software configurable processor" select VARIANT_IRQ_SWITCH select ARCH_REQUIRE_GPIOLIB + select XTENSA_CALIBRATE_CCOUNT endchoice config XTENSA_UNALIGNED_USER diff --git a/arch/xtensa/variants/s6000/Makefile b/arch/xtensa/variants/s6000/Makefile index 03b3975468bd..d83f3805130c 100644 --- a/arch/xtensa/variants/s6000/Makefile +++ b/arch/xtensa/variants/s6000/Makefile @@ -1,3 +1,4 @@ # s6000 Makefile obj-y += irq.o gpio.o +obj-$(CONFIG_XTENSA_CALIBRATE_CCOUNT) += delay.o diff --git a/arch/xtensa/variants/s6000/delay.c b/arch/xtensa/variants/s6000/delay.c new file mode 100644 index 000000000000..54b2b573f166 --- /dev/null +++ b/arch/xtensa/variants/s6000/delay.c @@ -0,0 +1,27 @@ +#include +#include +#include +#include + +#define LOOPS 10 +void platform_calibrate_ccount(void) +{ + u32 uninitialized_var(a); + u32 uninitialized_var(u); + u32 b; + u32 tstamp = S6_REG_GREG1 + S6_GREG1_GLOBAL_TIMER; + int i = LOOPS+1; + do { + u32 t = u; + asm volatile( + "1: l32i %0, %2, 0 ;" + " beq %0, %1, 1b ;" + : "=&a"(u) : "a"(t), "a"(tstamp)); + b = xtensa_get_ccount(); + if (i == LOOPS) + a = b; + } while (--i >= 0); + b -= a; + nsec_per_ccount = (LOOPS * 10000) / b; + ccount_per_jiffy = b * (100000UL / (LOOPS * HZ)); +} -- cgit v1.2.2 From 866e514d6a584810dc3ae25364f823b890b7d312 Mon Sep 17 00:00:00 2001 From: Oskar Schirmer Date: Mon, 11 May 2009 15:43:37 +0200 Subject: xtensa: update s6105_defconfig for ccount calibration The previous patch enabled ccount calibration for the s6000 variant. This patch updates the defconfig for the s6105 platform to reflect this change. Signed-off-by: Oskar Schirmer Signed-off-by: Chris Zankel --- arch/xtensa/configs/s6105_defconfig | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/xtensa/configs/s6105_defconfig b/arch/xtensa/configs/s6105_defconfig index 6e1deff41590..768bee006037 100644 --- a/arch/xtensa/configs/s6105_defconfig +++ b/arch/xtensa/configs/s6105_defconfig @@ -115,7 +115,7 @@ CONFIG_XTENSA_VARIANT_S6000=y CONFIG_PREEMPT=y # CONFIG_MATH_EMULATION is not set # CONFIG_HIGHMEM is not set -# CONFIG_XTENSA_CALIBRATE_CCOUNT is not set +CONFIG_XTENSA_CALIBRATE_CCOUNT=y CONFIG_SERIAL_CONSOLE=y # CONFIG_XTENSA_ISS_NETWORK is not set @@ -131,7 +131,6 @@ CONFIG_SERIAL_CONSOLE=y # CONFIG_XTENSA_PLATFORM_ISS is not set # CONFIG_XTENSA_PLATFORM_XT2000 is not set CONFIG_XTENSA_PLATFORM_S6105=y -CONFIG_XTENSA_CPU_CLOCK=300 CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS1,38400 debug bootmem_debug loglevel=7" -- cgit v1.2.2 From 78f3cdfa2ac0aa2b72b3ee7e4b3c3e550230179f Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Tue, 21 Apr 2009 00:34:15 -0700 Subject: xtensa: Fix linker script to include .literal sections Fix resembles implementation from Marc Gauthier and Piet Denaly: In the Xtensa architecture, assembly generates literals which must always precede the code (the L32R instruction that loads them only uses negative PC-relative offsets). For any *.text section, literals are placed in a corresponding *.literal section. The linker script (vmlinux.lds) must place these in the correct order. It must also combine them, when the *.text section can be larger than L32R's 256 kB range. For example, this doesn't work: *(.literal) *(.text) because L32R instructions at the end of .text can't reach the literals. The linker can solve this if they are combined in parentheses, like this: *(.literal .text) because it is now allowed mix literals in .text to bring them in range. None of this is done by standard vmlinux.lds.h macros such as TEXT_TEXT and INIT_TEXT. To avoid replicating the logic of that header file, we instead post-process the generated linker script to convert *(xxx.text) to *(xxx.literal xxx.text) for the following text sections: .text .ref.text .*init.text .*exit.text .text.* using a sed script. To do this we must override the default rule for vmlinux.lds (see scripts/Makefile.build and the top-level Makefile) to insert this extra step. Signed-off-by: Marc Gauthier Signed-off-by: Pete Delaney Signed-off-by: Chris Zankel --- arch/xtensa/kernel/Makefile | 21 ++++++++++++++++++--- arch/xtensa/kernel/vmlinux.lds.S | 4 +--- 2 files changed, 19 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/xtensa/kernel/Makefile b/arch/xtensa/kernel/Makefile index 7419dbccf027..fe3186de6a33 100644 --- a/arch/xtensa/kernel/Makefile +++ b/arch/xtensa/kernel/Makefile @@ -4,15 +4,30 @@ extra-y := head.o vmlinux.lds - obj-y := align.o entry.o irq.o coprocessor.o process.o ptrace.o \ setup.o signal.o syscall.o time.o traps.o vectors.o platform.o \ pci-dma.o init_task.o io.o -## windowspill.o - obj-$(CONFIG_KGDB) += xtensa-stub.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_MODULES) += xtensa_ksyms.o module.o +# In the Xtensa architecture, assembly generates literals which must always +# precede the L32R instruction with a relative offset less than 256 kB. +# Therefore, the .text and .literal section must be combined in parenthesis +# in the linker script, such as: *(.literal .text). +# +# We need to post-process the generated vmlinux.lds scripts to convert +# *(xxx.text) to *(xxx.literal xxx.text) for the following text sections: +# .text .ref.text .*init.text .*exit.text .text.* +# +# Replicate rules in scripts/Makefile.build + +sed-y = -e 's/(\(\.[a-z]*it\|\.ref\|\)\.text)/(\1.literal \1.text)/g' \ + -e 's/(\(\.text\.[a-z]*\))/(\1.literal \1)/g' + +quiet_cmd__cpp_lds_S = LDS $@ + cmd__cpp_lds_S = $(CPP) $(cpp_flags) -D__ASSEMBLY__ $< | sed $(sed-y) >$@ +$(obj)/vmlinux.lds: $(src)/vmlinux.lds.S FORCE + $(call if_changed_dep,_cpp_lds_S) diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S index 5accf51053da..41c159cd872f 100644 --- a/arch/xtensa/kernel/vmlinux.lds.S +++ b/arch/xtensa/kernel/vmlinux.lds.S @@ -87,7 +87,7 @@ SECTIONS { /* The HEAD_TEXT section must be the first section! */ HEAD_TEXT - *(.literal .text) + TEXT_TEXT VMLINUX_SYMBOL(__sched_text_start) = .; *(.sched.literal .sched.text) VMLINUX_SYMBOL(__sched_text_end) = .; @@ -139,8 +139,6 @@ SECTIONS __init_begin = .; .init.text : { _sinittext = .; - *(.init.literal) *(.cpuinit.literal) - *(.devinit.literal) *(.meminit.literal) INIT_TEXT _einittext = .; } -- cgit v1.2.2 From 05dc7b613481c695bb4fc476c6fbb46364b63f62 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Tue, 12 May 2009 13:28:23 +0200 Subject: viocd: needs to depend on BLOCK Fix this build error when CONFIG_BLOCK is not set: drivers/cdrom/viocd.c: In function 'viocd_blk_open': drivers/cdrom/viocd.c:156: error: dereferencing pointer to incomplete type drivers/cdrom/viocd.c: In function 'viocd_blk_release': drivers/cdrom/viocd.c:162: error: dereferencing pointer to incomplete type drivers/cdrom/viocd.c: In function 'viocd_blk_ioctl': drivers/cdrom/viocd.c:170: error: dereferencing pointer to incomplete type drivers/cdrom/viocd.c: In function 'viocd_blk_media_changed': drivers/cdrom/viocd.c:176: error: dereferencing pointer to incomplete type ... Signed-off-by: Alexander Beregalov Signed-off-by: Jens Axboe --- arch/powerpc/platforms/iseries/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig index 647e87787437..47a20cfb4486 100644 --- a/arch/powerpc/platforms/iseries/Kconfig +++ b/arch/powerpc/platforms/iseries/Kconfig @@ -17,6 +17,7 @@ config VIODASD config VIOCD tristate "iSeries Virtual I/O CD support" + depends on BLOCK select VIOPATH help If you are running Linux on an IBM iSeries system and you want to -- cgit v1.2.2 From 6f733a349c2b70a83b5451fbe61ef2cf67d41cdf Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Mon, 11 May 2009 09:58:19 -0700 Subject: ARM: OMAP: GPIO de-bounce clocks don't affect module idle state GPIO de-bounce clocks don't have any impact on the module idle state, so the clock code should not wait for the module to enable after the de-bounce clocks are enabled. Problem found by Kevin Hilman . Signed-off-by: Paul Walmsley Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/clock34xx.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 6763b8f73028..017a30e9aa1d 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -2182,7 +2182,7 @@ static struct clk wkup_32k_fck = { static struct clk gpio1_dbck = { .name = "gpio1_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &wkup_32k_fck, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO1_SHIFT, @@ -2427,7 +2427,7 @@ static struct clk per_32k_alwon_fck = { static struct clk gpio6_dbck = { .name = "gpio6_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO6_SHIFT, @@ -2437,7 +2437,7 @@ static struct clk gpio6_dbck = { static struct clk gpio5_dbck = { .name = "gpio5_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO5_SHIFT, @@ -2447,7 +2447,7 @@ static struct clk gpio5_dbck = { static struct clk gpio4_dbck = { .name = "gpio4_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO4_SHIFT, @@ -2457,7 +2457,7 @@ static struct clk gpio4_dbck = { static struct clk gpio3_dbck = { .name = "gpio3_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO3_SHIFT, @@ -2467,7 +2467,7 @@ static struct clk gpio3_dbck = { static struct clk gpio2_dbck = { .name = "gpio2_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO2_SHIFT, -- cgit v1.2.2 From eaf9393bb79a9c7c8e708669f9581ca466122430 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Tue, 12 May 2009 11:20:02 -0700 Subject: ARM: OMAP2: Fix tusb6010 init error and compilation warning Fix "tusb6010 init error 5, -19" and compilation warning from function tusb6010_platform_retime "warning: 'sysclk_ps' is used uninitialized in this function". I suppose commit c094ba34b8f780885d029ce3c2715a194b780e5d was meant to test for zero fclk_ps instead of sysclk_ps. Signed-off-by: Jarkko Nikula Cc: Roel Kluin Tested-by: Kalle Valo Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/usb-tusb6010.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 8df55f40f4c0..8622c24cd270 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -187,7 +187,7 @@ int tusb6010_platform_retime(unsigned is_refclk) unsigned sysclk_ps; int status; - if (!refclk_psec || sysclk_ps == 0) + if (!refclk_psec || fclk_ps == 0) return -ENODEV; sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60; -- cgit v1.2.2 From c8a799b03a981b4b27d8fd7320c96cfbe781b2fb Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Tue, 12 May 2009 11:20:02 -0700 Subject: ARM: OMAP2: Fix SPI driver failure on 2420 when running multi-omap config SPI driver will do unhandled fault on OMAP2420 if trying to probe non-existing SPI busses. Register those additional busses runtime only for cpus having them. Signed-off-by: Jarkko Nikula Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/devices.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 496983ade97e..894cc355818a 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -354,10 +354,12 @@ static void omap_init_mcspi(void) platform_device_register(&omap2_mcspi1); platform_device_register(&omap2_mcspi2); #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) - platform_device_register(&omap2_mcspi3); + if (cpu_is_omap2430() || cpu_is_omap343x()) + platform_device_register(&omap2_mcspi3); #endif #ifdef CONFIG_ARCH_OMAP3 - platform_device_register(&omap2_mcspi4); + if (cpu_is_omap343x()) + platform_device_register(&omap2_mcspi4); #endif } -- cgit v1.2.2 From 4ea60b0c7a8487af5de736d394b147baf7691f3c Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 12 May 2009 11:20:03 -0700 Subject: ARM: OMAP2/3: Add name for musb clocks With the clkdev, musb_core.c needs to register clock with name "ick". Once all the platforms using the musb driver have been converted to use clockdev, the clock name does not need to be passed from the low-level init code. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/clock24xx.c | 2 +- arch/arm/mach-omap2/clock34xx.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index efc59c49341b..ff9b4c0b00ae 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -206,7 +206,7 @@ static struct omap_clk omap24xx_clks[] = { CLK(NULL, "aes_ick", &aes_ick, CK_243X | CK_242X), CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X), CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X), - CLK(NULL, "usbhs_ick", &usbhs_ick, CK_243X), + CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X), CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X), CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X), CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X), diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 0a14dca31e30..a0575393d0ea 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -157,7 +157,7 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck, CK_343X), CLK(NULL, "ssi_sst_fck", &ssi_sst_fck, CK_343X), CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X), - CLK(NULL, "hsotgusb_ick", &hsotgusb_ick, CK_343X), + CLK("musb_hdrc", "ick", &hsotgusb_ick, CK_343X), CLK(NULL, "sdrc_ick", &sdrc_ick, CK_343X), CLK(NULL, "gpmc_fck", &gpmc_fck, CK_343X), CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X), -- cgit v1.2.2 From 9aa7a7d5daa7e33d7e7656bffe76af67c1bf56d2 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 12 May 2009 13:19:39 -0700 Subject: alpha: unbreak percpu again Commit 9b8de7479d0dbab1ed98b5b015d44232c9d3d08e ("FRV: Fix the section attribute on UP DECLARE_PER_CPU()") cleaned up DECLARE/DEFINE_PER_CPU() macros and in the process made alpha percpu.h include include/asm-generic/percpu.h which breaks compilation due to duplicate definitions. Remove inclusion of generic asm helper file and define whatever necessary in alpha header proper. In the longer term, percpu definitions will be unified and all these little subtlties will be removed. Signed-off-by: Tejun Heo Cc: Ivan Kokshaysky Cc: David Howells Cc: Andrew Morton Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/percpu.h | 26 +++++++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h index e9e0bb5a23bf..06c5c7a4afd3 100644 --- a/arch/alpha/include/asm/percpu.h +++ b/arch/alpha/include/asm/percpu.h @@ -1,7 +1,9 @@ #ifndef __ALPHA_PERCPU_H #define __ALPHA_PERCPU_H + #include #include +#include /* * Determine the real variable name from the name visible in the @@ -73,6 +75,28 @@ extern unsigned long __per_cpu_offset[NR_CPUS]; #endif /* SMP */ -#include +#ifdef CONFIG_SMP +#define PER_CPU_BASE_SECTION ".data.percpu" +#else +#define PER_CPU_BASE_SECTION ".data" +#endif + +#ifdef CONFIG_SMP + +#ifdef MODULE +#define PER_CPU_SHARED_ALIGNED_SECTION "" +#else +#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned" +#endif +#define PER_CPU_FIRST_SECTION ".first" + +#else + +#define PER_CPU_SHARED_ALIGNED_SECTION "" +#define PER_CPU_FIRST_SECTION "" + +#endif + +#define PER_CPU_ATTRIBUTES #endif /* __ALPHA_PERCPU_H */ -- cgit v1.2.2 From 44408ad7368906c84000e87a99c14a16dbb867fd Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 12 May 2009 13:31:40 -0700 Subject: xen: use header for EXPORT_SYMBOL_GPL mmu.c needs to #include module.h to prevent these warnings: arch/x86/xen/mmu.c:239: warning: data definition has no type or storage class arch/x86/xen/mmu.c:239: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/x86/xen/mmu.c:239: warning: parameter names (without types) in function declaration [ Impact: cleanup ] Signed-off-by: Randy Dunlap Acked-by: Jeremy Fitzhardinge Signed-off-by: Andrew Morton LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/xen/mmu.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index e25a78e1113a..fba55b1a4021 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -42,6 +42,7 @@ #include #include #include +#include #include #include -- cgit v1.2.2 From aa512a27e9e8ed32f31b15eec67ab1ceca33839b Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 13 May 2009 13:52:19 -0400 Subject: x86/function-graph: fix constraint for recording old return value After upgrading from gcc 4.2.2 to 4.4.0, the function graph tracer broke. Investigating, I found that in the asm that replaces the return value, gcc was using the same register for the old value as it was for the new value. mov (addr), old mov new, (addr) But if old and new are the same register, we clobber new with old! I first thought this was a bug in gcc 4.4.0 and reported it: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=40132 Andrew Pinski responded (quickly), saying that it was correct gcc behavior and the code needed to denote old as an "early clobber". Instead of "=r"(old), we need "=&r"(old). [Impact: keep function graph tracer from breaking with gcc 4.4.0 ] Signed-off-by: Steven Rostedt --- arch/x86/kernel/ftrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index 18dfa30795c9..b79c5533c421 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -442,7 +442,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) _ASM_EXTABLE(1b, 4b) _ASM_EXTABLE(2b, 4b) - : [old] "=r" (old), [faulted] "=r" (faulted) + : [old] "=&r" (old), [faulted] "=r" (faulted) : [parent] "r" (parent), [return_hooker] "r" (return_hooker) : "memory" ); -- cgit v1.2.2 From fa0b5596a69795c2cc4c937b35ee1b7a40bf9462 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 13 May 2009 17:24:24 -0500 Subject: powerpc/83xx: Update defconfigs Signed-off-by: Kumar Gala --- arch/powerpc/configs/83xx/asp8347_defconfig | 104 +++++++++++++------ arch/powerpc/configs/83xx/mpc8313_rdb_defconfig | 114 +++++++++++++++------ arch/powerpc/configs/83xx/mpc8315_rdb_defconfig | 114 +++++++++++++++------ arch/powerpc/configs/83xx/mpc832x_mds_defconfig | 107 +++++++++++++++----- arch/powerpc/configs/83xx/mpc832x_rdb_defconfig | 113 +++++++++++++++------ arch/powerpc/configs/83xx/mpc834x_itx_defconfig | 108 ++++++++++++++------ arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig | 108 ++++++++++++++------ arch/powerpc/configs/83xx/mpc834x_mds_defconfig | 103 ++++++++++++++----- arch/powerpc/configs/83xx/mpc836x_mds_defconfig | 108 +++++++++++++++----- arch/powerpc/configs/83xx/mpc836x_rdk_defconfig | 96 +++++++++++++----- arch/powerpc/configs/83xx/mpc837x_mds_defconfig | 104 ++++++++++++++----- arch/powerpc/configs/83xx/mpc837x_rdb_defconfig | 111 +++++++++++++++------ arch/powerpc/configs/83xx/sbc834x_defconfig | 96 +++++++++++++----- arch/powerpc/configs/mpc83xx_defconfig | 115 ++++++++++++++++------ 14 files changed, 1115 insertions(+), 386 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig index fc4a39a40e72..278939713775 100644 --- a/arch/powerpc/configs/83xx/asp8347_defconfig +++ b/arch/powerpc/configs/83xx/asp8347_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:47 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:05 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y CONFIG_FSL_EMB_PERFMON=y # CONFIG_ALTIVEC is not set @@ -57,6 +58,7 @@ CONFIG_REDBOOT=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -74,6 +76,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -88,19 +99,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -110,16 +124,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -132,7 +149,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -148,18 +164,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -184,6 +193,8 @@ CONFIG_ASP834x=y CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -245,9 +256,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -295,7 +310,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -469,7 +483,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -499,13 +512,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -532,6 +552,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -565,6 +586,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -584,6 +607,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -594,11 +618,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -608,7 +633,6 @@ CONFIG_GIANFAR=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -759,12 +783,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -796,6 +817,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -810,11 +832,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -959,11 +984,11 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # # CONFIG_USB_LIBUSUAL is not set @@ -991,7 +1016,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1006,6 +1030,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1067,8 +1092,9 @@ CONFIG_RTC_DRV_DS1374=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1079,6 +1105,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1100,6 +1127,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1154,6 +1186,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1166,7 +1199,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1233,6 +1265,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1248,11 +1281,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1274,13 +1308,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1309,10 +1354,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1381,6 +1428,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig index 409d017621a8..c5c0fe71a438 100644 --- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:48 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:06 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,16 +123,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -183,6 +192,8 @@ CONFIG_MPC831x_RDB=y CONFIG_PPC_MPC831x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -295,7 +310,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -481,7 +495,6 @@ CONFIG_MTD_NAND_FSL_ELBC=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -512,13 +525,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -576,9 +597,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -600,6 +623,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y @@ -626,6 +650,7 @@ CONFIG_MD_RAID1=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -660,6 +685,8 @@ CONFIG_MII=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -697,6 +724,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -707,11 +735,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -721,6 +750,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -730,6 +760,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -737,7 +768,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -815,6 +845,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y @@ -827,6 +858,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -889,12 +921,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -914,7 +943,6 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y @@ -942,6 +970,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -957,12 +986,15 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -981,6 +1013,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set @@ -1077,7 +1110,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1135,11 +1167,11 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1181,7 +1213,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1228,6 +1259,7 @@ CONFIG_USB_ETH_RNDIS=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1296,8 +1328,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1308,6 +1341,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1329,6 +1363,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1383,6 +1422,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1395,7 +1435,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1427,6 +1466,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1442,11 +1482,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1464,6 +1505,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1493,9 +1537,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1503,17 +1550,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1544,10 +1593,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1616,6 +1667,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig index 03db97c6cf33..af4952feba36 100644 --- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:49 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:06 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,16 +123,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -183,6 +192,8 @@ CONFIG_MPC831x_RDB=y CONFIG_PPC_MPC831x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -295,7 +310,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -481,7 +495,6 @@ CONFIG_MTD_NAND_IDS=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -512,13 +525,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -576,9 +597,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -601,6 +624,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -687,6 +711,7 @@ CONFIG_MD_RAID1=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -721,6 +746,8 @@ CONFIG_MII=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -758,6 +785,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -768,11 +796,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -782,6 +811,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -791,6 +821,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -798,7 +829,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -876,6 +906,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y @@ -888,6 +919,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -950,12 +982,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -975,7 +1004,6 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y @@ -1003,6 +1031,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1018,12 +1047,15 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1042,6 +1074,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set @@ -1138,7 +1171,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1196,11 +1228,11 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1242,7 +1274,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1289,6 +1320,7 @@ CONFIG_USB_ETH_RNDIS=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1357,8 +1389,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1369,6 +1402,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1390,6 +1424,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1444,6 +1483,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1456,7 +1496,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1488,6 +1527,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1503,11 +1543,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1525,6 +1566,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1554,9 +1598,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1564,17 +1611,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1605,10 +1654,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1677,6 +1728,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig index fb17de53cc02..8c8f660b4fc7 100644 --- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:50 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:07 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,16 +123,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -183,6 +192,8 @@ CONFIG_MPC832x_MDS=y CONFIG_PPC_MPC832x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -245,9 +256,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -295,7 +310,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -411,13 +425,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -475,9 +496,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -499,6 +522,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -515,6 +539,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -548,6 +573,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -567,6 +594,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -577,14 +605,15 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -594,6 +623,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -603,6 +633,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -610,7 +641,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -692,6 +722,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -753,12 +784,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -790,6 +818,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -804,11 +833,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -906,7 +938,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -920,7 +951,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -988,8 +1019,9 @@ CONFIG_RTC_DRV_DS1374=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1000,6 +1032,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1021,6 +1054,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1064,6 +1102,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1076,7 +1115,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1106,6 +1144,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_DLM is not set CONFIG_UCC_FAST=y CONFIG_UCC=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1119,11 +1158,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1145,13 +1186,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1180,10 +1232,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1252,6 +1306,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig index a012ce235203..227dbba76795 100644 --- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:52 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:08 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,16 +123,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -183,6 +192,8 @@ CONFIG_MPC832x_RDB=y CONFIG_PPC_MPC832x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -245,9 +256,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -295,7 +310,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -413,13 +427,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -477,9 +499,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -501,6 +525,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -517,6 +542,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -551,6 +577,8 @@ CONFIG_MII=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -570,6 +598,7 @@ CONFIG_E1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -580,14 +609,15 @@ CONFIG_E1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -597,6 +627,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -606,6 +637,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -613,7 +645,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -691,6 +722,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y @@ -704,6 +736,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -768,12 +801,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -792,7 +822,6 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y @@ -820,6 +849,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -835,12 +865,15 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -859,6 +892,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set @@ -955,7 +989,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1012,11 +1045,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1058,7 +1091,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1074,6 +1106,7 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set @@ -1101,6 +1134,7 @@ CONFIG_MMC_SPI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1111,6 +1145,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1132,6 +1167,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1178,6 +1218,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1190,7 +1231,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1264,6 +1304,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_DLM is not set CONFIG_UCC_FAST=y CONFIG_UCC=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1277,11 +1318,13 @@ CONFIG_CRC_ITU_T=y CONFIG_CRC32=y CONFIG_CRC7=y # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1303,13 +1346,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1338,10 +1392,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1410,6 +1466,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig index 4bcc4a1ff308..24ee7fcac87e 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:53 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:09 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,16 +123,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -183,6 +192,8 @@ CONFIG_MPC834x_ITX=y CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -294,7 +309,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -350,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -362,7 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -465,7 +479,6 @@ CONFIG_MTD_PHYSMAP=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -496,13 +509,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -608,9 +629,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -633,6 +656,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -720,6 +744,7 @@ CONFIG_MD_RAID1=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -755,6 +780,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -765,11 +791,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -779,6 +806,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -788,6 +816,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -795,7 +824,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -853,6 +881,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y @@ -865,6 +894,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -927,12 +957,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set CONFIG_SENSORS_PCF8574=y # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -951,7 +978,6 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y @@ -1083,11 +1109,11 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1128,7 +1154,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1144,6 +1169,7 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1212,8 +1238,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1224,6 +1251,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1245,6 +1273,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1292,6 +1325,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1304,7 +1338,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1375,6 +1408,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1388,11 +1422,13 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1414,13 +1450,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1449,10 +1496,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1521,6 +1570,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig index 9ba5518ce8df..7f39543205a9 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:55 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:10 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,16 +123,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -183,6 +192,8 @@ CONFIG_MPC834x_ITX=y CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -294,7 +309,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -350,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -362,7 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -465,7 +479,6 @@ CONFIG_MTD_PHYSMAP=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -496,13 +509,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -560,9 +581,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -584,6 +607,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -600,6 +624,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -635,6 +660,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -645,11 +671,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -659,6 +686,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -668,6 +696,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -675,7 +704,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -733,6 +761,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y @@ -745,6 +774,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -807,12 +837,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set CONFIG_SENSORS_PCF8574=y # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -831,7 +858,6 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y @@ -963,11 +989,11 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1008,7 +1034,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1023,6 +1048,7 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1091,8 +1117,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1103,6 +1130,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1124,6 +1152,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1171,6 +1204,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1183,7 +1217,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1254,6 +1287,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1267,11 +1301,13 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1293,13 +1329,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1328,10 +1375,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1400,6 +1449,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig index 18e4bc0b3c11..1cd1fcac22c8 100644 --- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:56 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:11 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,16 +123,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -183,6 +192,8 @@ CONFIG_MPC834x_MDS=y CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -294,7 +309,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -350,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -362,7 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -410,13 +424,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -443,6 +464,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -476,6 +498,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -513,6 +537,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -523,11 +548,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -537,6 +563,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -546,6 +573,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -553,7 +581,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -694,12 +721,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -731,6 +755,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -745,11 +770,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -847,7 +875,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -861,7 +888,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -929,8 +956,9 @@ CONFIG_RTC_DRV_DS1374=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -941,6 +969,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -962,6 +991,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1005,6 +1039,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1017,7 +1052,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1045,6 +1079,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1058,11 +1093,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1084,13 +1121,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1119,10 +1167,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1191,6 +1241,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig index 76db8138eac7..ce5177393a0d 100644 --- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:58 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:12 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,16 +123,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -182,6 +191,8 @@ CONFIG_MPC836x_MDS=y # CONFIG_ASP834x is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -243,9 +254,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -271,6 +285,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -293,7 +308,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -349,6 +363,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -361,7 +376,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -464,7 +478,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -493,13 +506,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -557,9 +577,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -581,6 +603,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -597,6 +620,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -630,6 +654,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -649,6 +675,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -659,14 +686,15 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -676,6 +704,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -685,6 +714,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -692,7 +722,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -774,6 +803,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -835,12 +865,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -872,6 +899,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -886,11 +914,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -988,7 +1019,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1002,7 +1032,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -1070,8 +1100,9 @@ CONFIG_RTC_DRV_DS1374=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1082,6 +1113,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1103,6 +1135,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1147,6 +1184,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1159,7 +1197,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1189,6 +1226,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_DLM is not set CONFIG_UCC_FAST=y CONFIG_UCC=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1202,11 +1240,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1228,13 +1268,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1263,10 +1314,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1335,6 +1388,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig index 0dc11c44306b..7f1d1383a249 100644 --- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:01 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:13 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -57,6 +58,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -74,6 +76,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -88,19 +99,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -110,16 +124,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -132,7 +149,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -148,18 +164,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -183,6 +192,8 @@ CONFIG_MPC836x_RDK=y # CONFIG_ASP834x is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -243,9 +254,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -295,7 +310,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -475,7 +489,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -506,13 +519,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -539,6 +560,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -574,6 +596,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -584,14 +607,15 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -601,7 +625,6 @@ CONFIG_UCC_GETH=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -673,6 +696,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y @@ -686,6 +710,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set @@ -749,12 +774,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -774,7 +796,6 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set CONFIG_SPI_SPIDEV=y # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y @@ -924,6 +945,7 @@ CONFIG_FB_OF=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -956,7 +978,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_UWB is not set # CONFIG_MMC is not set @@ -967,6 +988,7 @@ CONFIG_HID_COMPAT=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -977,6 +999,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -998,6 +1021,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1052,6 +1080,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1064,7 +1093,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1095,6 +1123,7 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_UCC_SLOW=y CONFIG_UCC_FAST=y CONFIG_UCC=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1110,11 +1139,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1136,13 +1166,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1182,10 +1223,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1254,6 +1297,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig index e42f6b3917d2..bf636fd560ad 100644 --- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:59 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:12 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,20 +98,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,10 +123,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -120,6 +136,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -132,7 +149,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -148,18 +164,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -184,6 +193,8 @@ CONFIG_MPC837x_MDS=y CONFIG_PPC_MPC837x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -294,7 +309,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -350,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -362,7 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -410,13 +424,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -474,9 +495,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -499,6 +522,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -575,6 +599,7 @@ CONFIG_ATA_SFF=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -608,6 +633,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -627,6 +654,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -637,11 +665,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -651,6 +680,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -660,6 +690,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -667,7 +698,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -811,12 +841,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -848,6 +875,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -862,11 +890,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -964,7 +995,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -978,7 +1008,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -994,6 +1024,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1004,6 +1035,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1025,6 +1057,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1068,6 +1105,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1080,7 +1118,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1112,6 +1149,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1125,11 +1163,13 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1149,13 +1189,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1184,10 +1235,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1256,6 +1309,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig index 408022f79a50..fe6454eacbdb 100644 --- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:01 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:14 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,20 +98,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,10 +123,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -120,6 +136,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -132,7 +149,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -148,18 +164,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -184,6 +193,8 @@ CONFIG_MPC837x_RDB=y CONFIG_PPC_MPC837x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -294,7 +309,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -345,6 +359,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -357,7 +372,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -406,13 +420,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -469,9 +490,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -494,6 +517,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -563,7 +587,7 @@ CONFIG_MD_AUTODETECT=y CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=y -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=y # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set @@ -581,6 +605,7 @@ CONFIG_MD_RAID5_RESHAPE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -614,6 +639,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -633,6 +660,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -643,11 +671,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -657,7 +686,6 @@ CONFIG_GIANFAR=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -811,12 +839,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -848,6 +873,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -862,11 +888,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -976,15 +1005,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1050,11 +1081,11 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # # CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set @@ -1084,7 +1115,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1099,6 +1129,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1108,6 +1139,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1118,6 +1150,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1139,6 +1172,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1182,6 +1220,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1194,7 +1233,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1226,6 +1264,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1239,11 +1278,13 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1263,13 +1304,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1302,10 +1354,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1374,6 +1428,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig index a0c42fb65cb9..fe08f672cb27 100644 --- a/arch/powerpc/configs/83xx/sbc834x_defconfig +++ b/arch/powerpc/configs/83xx/sbc834x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:02 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:15 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -108,16 +122,19 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -130,7 +147,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -146,18 +162,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -182,6 +191,8 @@ CONFIG_SBC834x=y CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -242,9 +253,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -270,6 +284,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -292,7 +307,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -348,6 +362,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -360,7 +375,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -408,13 +422,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -441,6 +462,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -474,6 +496,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -493,6 +517,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -503,11 +528,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -517,7 +543,6 @@ CONFIG_GIANFAR=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -660,12 +685,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -697,6 +719,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -711,11 +734,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -813,7 +839,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_UWB is not set # CONFIG_MMC is not set @@ -824,6 +849,7 @@ CONFIG_HID_COMPAT=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -848,6 +874,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -891,6 +922,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -903,7 +935,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -919,6 +950,7 @@ CONFIG_RPCSEC_GSS_KRB5=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -932,11 +964,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -956,13 +990,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -991,10 +1036,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1063,6 +1110,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 45f03cad8db6..433c303eb82b 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:36 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:58 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -58,6 +59,7 @@ CONFIG_REDBOOT=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -89,20 +100,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -111,10 +125,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -122,6 +138,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -134,7 +151,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -150,18 +166,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -189,6 +198,8 @@ CONFIG_PPC_MPC834x=y CONFIG_PPC_MPC837x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -251,9 +262,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -281,6 +295,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -303,7 +318,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -359,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -371,7 +386,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -485,7 +499,6 @@ CONFIG_MTD_NAND_FSL_ELBC=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -516,13 +529,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -580,9 +600,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -605,6 +627,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -681,6 +704,7 @@ CONFIG_ATA_SFF=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -714,6 +738,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -733,6 +759,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -743,14 +770,15 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -760,6 +788,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -769,6 +798,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -776,7 +806,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -867,6 +896,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -932,12 +962,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -992,6 +1019,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1006,11 +1034,15 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1121,15 +1153,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1181,6 +1215,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_FHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set @@ -1195,11 +1230,11 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # # CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set @@ -1229,7 +1264,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1245,6 +1279,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1254,6 +1289,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1264,6 +1300,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1285,6 +1322,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1329,6 +1371,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1341,7 +1384,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1375,6 +1417,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_DLM is not set CONFIG_UCC_FAST=y CONFIG_UCC=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1388,11 +1431,13 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1412,13 +1457,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1448,10 +1504,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set @@ -1520,6 +1578,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # -- cgit v1.2.2 From 0ae0e7edf8c93c399b37d41e647ecc9ed13f0b9c Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 13 May 2009 17:24:50 -0500 Subject: powerpc/85xx: Update defconfigs Signed-off-by: Kumar Gala --- arch/powerpc/configs/85xx/ksi8560_defconfig | 86 ++++-- arch/powerpc/configs/85xx/mpc8540_ads_defconfig | 82 +++-- arch/powerpc/configs/85xx/mpc8560_ads_defconfig | 89 ++++-- arch/powerpc/configs/85xx/mpc85xx_cds_defconfig | 88 ++++-- arch/powerpc/configs/85xx/sbc8548_defconfig | 84 ++++-- arch/powerpc/configs/85xx/sbc8560_defconfig | 83 +++-- arch/powerpc/configs/85xx/socrates_defconfig | 385 ++++++++++++++++++------ arch/powerpc/configs/85xx/stx_gp3_defconfig | 105 +++++-- arch/powerpc/configs/85xx/tqm8540_defconfig | 100 ++++-- arch/powerpc/configs/85xx/tqm8541_defconfig | 101 +++++-- arch/powerpc/configs/85xx/tqm8548_defconfig | 64 +++- arch/powerpc/configs/85xx/tqm8555_defconfig | 101 +++++-- arch/powerpc/configs/85xx/tqm8560_defconfig | 101 +++++-- 13 files changed, 1118 insertions(+), 351 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig index 6479bb9f3f57..09146ddaa3ca 100644 --- a/arch/powerpc/configs/85xx/ksi8560_defconfig +++ b/arch/powerpc/configs/85xx/ksi8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:03 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:16 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -86,21 +97,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,10 +123,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -120,6 +136,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -127,7 +144,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -143,11 +159,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -163,6 +174,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set CONFIG_KSI8560=y # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -231,9 +243,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -264,17 +279,17 @@ CONFIG_PPC_PCI_CHOICE=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -330,6 +345,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -342,7 +358,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -444,7 +459,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -467,9 +481,13 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -502,6 +520,7 @@ CONFIG_IDE_PROC_FS=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -531,6 +550,8 @@ CONFIG_MDIO_BITBANG=y # CONFIG_MDIO_GPIO is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -544,6 +565,7 @@ CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_FCC=y CONFIG_FS_ENET_MDIO_FCC=y CONFIG_NETDEV_1000=y +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y CONFIG_NETDEV_10000=y @@ -552,7 +574,6 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -624,6 +645,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -663,6 +685,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set @@ -726,7 +749,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -739,7 +761,7 @@ CONFIG_USB_SUPPORT=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -753,6 +775,7 @@ CONFIG_USB_SUPPORT=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -763,6 +786,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -785,6 +809,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -829,6 +858,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -838,7 +868,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -866,6 +895,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -879,11 +909,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -901,6 +933,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -931,9 +966,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -941,17 +979,20 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1045,6 +1086,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig index 905e8a3388d6..7b43be7586b6 100644 --- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:05 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:17 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -89,21 +100,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -112,16 +126,19 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -129,7 +146,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -145,11 +161,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -165,6 +176,7 @@ CONFIG_MPC8540_ADS=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -233,9 +245,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -266,17 +281,17 @@ CONFIG_PPC_PCI_CHOICE=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -332,6 +347,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -344,7 +360,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -387,9 +402,13 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -404,6 +423,7 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -432,6 +452,8 @@ CONFIG_PHYLIB=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -441,6 +463,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y CONFIG_NETDEV_10000=y @@ -449,7 +472,6 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -607,7 +629,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -620,7 +641,7 @@ CONFIG_USB_SUPPORT=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -634,6 +655,7 @@ CONFIG_USB_SUPPORT=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -644,6 +666,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -665,6 +688,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -708,6 +736,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -717,7 +746,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -745,6 +773,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -758,11 +787,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -780,6 +811,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -809,9 +843,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -819,17 +856,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -922,6 +961,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig index 095e2ded6e8b..62adb71a5d4f 100644 --- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:09 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:17 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -90,21 +101,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -114,10 +128,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -125,6 +141,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -132,7 +149,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -148,11 +164,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -168,6 +179,7 @@ CONFIG_MPC8560_ADS=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -236,9 +248,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -264,6 +279,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set CONFIG_PCI_DEBUG=y # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -277,17 +293,17 @@ CONFIG_PCI_DEBUG=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -343,6 +359,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -355,7 +372,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -405,12 +421,16 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -437,6 +457,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -470,6 +491,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -493,6 +516,7 @@ CONFIG_E1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -503,10 +527,12 @@ CONFIG_E1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -516,6 +542,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -525,6 +552,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -532,7 +560,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -608,6 +635,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -651,6 +679,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -719,7 +748,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -733,7 +761,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -749,6 +777,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -759,6 +788,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -780,6 +810,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -823,6 +858,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -832,7 +868,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -860,6 +895,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -873,11 +909,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -895,6 +933,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -924,9 +965,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -934,17 +978,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1037,6 +1083,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig index f95961c04a20..41209e3a6545 100644 --- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig +++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:13 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:18 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -89,21 +100,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -113,16 +127,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -130,7 +147,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -146,11 +162,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -166,6 +177,7 @@ CONFIG_MPC85xx_CDS=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -234,9 +246,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -262,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -275,17 +291,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -341,6 +357,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -353,7 +370,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -402,18 +418,23 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y @@ -488,6 +509,7 @@ CONFIG_BLK_DEV_IDEDMA=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -521,6 +543,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -540,6 +564,7 @@ CONFIG_E1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -550,10 +575,12 @@ CONFIG_E1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -563,6 +590,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -572,6 +600,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -579,7 +608,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -750,7 +778,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -764,7 +791,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -780,6 +807,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -790,6 +818,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -811,6 +840,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -854,6 +888,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -863,7 +898,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -891,6 +925,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -904,11 +939,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -926,6 +963,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -955,9 +995,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -965,17 +1008,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1068,6 +1113,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig index e68e80987aa9..6c36c9c7abfd 100644 --- a/arch/powerpc/configs/85xx/sbc8548_defconfig +++ b/arch/powerpc/configs/85xx/sbc8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:15 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:19 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -89,20 +100,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -111,16 +125,19 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -128,7 +145,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -144,11 +160,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -164,6 +175,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -231,9 +243,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -258,6 +273,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -271,17 +287,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -337,6 +353,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -349,7 +366,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -396,12 +412,16 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -428,6 +448,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -461,6 +482,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -480,6 +503,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -490,10 +514,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -503,6 +529,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -512,6 +539,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -519,7 +547,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -692,6 +719,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -716,6 +744,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -759,6 +792,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -768,7 +802,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -784,6 +817,7 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -797,11 +831,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -821,13 +857,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -918,6 +965,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig index b1c766ef7e2e..4aaf1a6bdc7d 100644 --- a/arch/powerpc/configs/85xx/sbc8560_defconfig +++ b/arch/powerpc/configs/85xx/sbc8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:17 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:20 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -89,21 +100,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -111,16 +125,19 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -128,7 +145,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -144,11 +160,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -164,6 +175,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -231,9 +243,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -264,17 +279,17 @@ CONFIG_PPC_PCI_CHOICE=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -330,6 +345,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -342,7 +358,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -385,9 +400,13 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -402,6 +421,7 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -430,6 +450,8 @@ CONFIG_BROADCOM_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -439,6 +461,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y CONFIG_NETDEV_10000=y @@ -447,7 +470,6 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -603,7 +625,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -616,7 +637,7 @@ CONFIG_USB_SUPPORT=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -665,8 +686,9 @@ CONFIG_RTC_DRV_M48T59=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -691,6 +713,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -734,6 +761,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -743,7 +771,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -771,6 +798,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -784,11 +812,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -806,6 +836,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -834,9 +867,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -844,17 +880,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -958,6 +996,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/85xx/socrates_defconfig b/arch/powerpc/configs/85xx/socrates_defconfig index 0cc9048290a8..79984589db69 100644 --- a/arch/powerpc/configs/85xx/socrates_defconfig +++ b/arch/powerpc/configs/85xx/socrates_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26.2 -# Sat Oct 18 11:06:13 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:21 2009 # # CONFIG_PPC64 is not set @@ -15,15 +15,19 @@ CONFIG_PPC_85xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_E500=y +# CONFIG_PPC_E500MC is not set CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y +CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -33,6 +37,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -43,7 +48,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -54,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -71,54 +77,70 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -126,12 +148,10 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -145,13 +165,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -160,12 +178,14 @@ CONFIG_MPC85xx=y # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set +# CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set CONFIG_SOCRATES=y # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set +# CONFIG_TQM8548 is not set # CONFIG_TQM8555 is not set # CONFIG_TQM8560 is not set # CONFIG_SBC8548 is not set @@ -181,14 +201,16 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -202,6 +224,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -216,17 +240,24 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +CONFIG_MIGRATION=y +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -238,6 +269,7 @@ CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -245,6 +277,8 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_HAS_RAPIDIO is not set # @@ -256,15 +290,12 @@ CONFIG_PCI_LEGACY=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -315,6 +346,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -324,7 +356,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -339,27 +373,17 @@ CONFIG_CAN_BCM=y # CAN Device Drivers # # CONFIG_CAN_VCAN is not set -# CONFIG_CAN_OLD_DRIVERS is not set -# CONFIG_CAN_SLCAN is not set -CONFIG_CAN_SJA1000=y -CONFIG_CAN_SJA1000_MEM_OF=y -# CONFIG_CAN_EMS_PCI is not set -# CONFIG_CAN_IXXAT_PCI is not set -# CONFIG_CAN_PEAK_PCI is not set -# CONFIG_CAN_KVASER_PCI is not set -# CONFIG_CAN_MSCAN is not set # CONFIG_CAN_DEBUG_DEVICES is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -378,6 +402,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -458,15 +483,22 @@ CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_NAND_FSL_ELBC is not set +# CONFIG_MTD_NAND_FSL_UPM is not set CONFIG_MTD_NAND_SOCRATES=y # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_SPI=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -486,12 +518,24 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -533,6 +577,8 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -549,7 +595,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -572,6 +618,9 @@ CONFIG_MARVELL_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -581,22 +630,28 @@ CONFIG_MII=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -607,10 +662,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -619,7 +677,10 @@ CONFIG_GFAR_NAPI=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -668,17 +729,23 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -CONFIG_TOUCHSCREEN_TSC2003=y # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set # CONFIG_INPUT_MISC is not set # @@ -691,6 +758,7 @@ CONFIG_TOUCHSCREEN_TSC2003=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -715,16 +783,20 @@ CONFIG_SERIAL_8250_RSA=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -734,44 +806,62 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -785,33 +875,38 @@ CONFIG_SPI_MASTER=y # SPI Master Controller Drivers # # CONFIG_SPI_BITBANG is not set -CONFIG_SPI_SOCRATES=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y CONFIG_HWMON_VID=y +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -827,10 +922,15 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -849,22 +949,31 @@ CONFIG_SENSORS_W83781D=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -893,6 +1002,7 @@ CONFIG_DAB=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -914,10 +1024,6 @@ CONFIG_FB_BOTH_ENDIAN=y # # Frame buffer hardware drivers # -CONFIG_FB_MB862XX=y -# CONFIG_FB_MB862XX_PCI_GDC is not set -CONFIG_FB_MB862XX_LIME=y -# CONFIG_FB_PRE_INIT_FB is not set # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set @@ -936,6 +1042,7 @@ CONFIG_FB_MB862XX_LIME=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -944,9 +1051,16 @@ CONFIG_FB_MB862XX_LIME=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_FSL_DIU is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +CONFIG_FB_MB862XX=y +# CONFIG_FB_MB862XX_PCI_GDC is not set +CONFIG_FB_MB862XX_LIME=y +# CONFIG_FB_PRE_INIT_FB is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -974,10 +1088,6 @@ CONFIG_FONT_8x16=y # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set # CONFIG_LOGO is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -988,9 +1098,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1008,6 +1145,9 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1018,6 +1158,7 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -1031,6 +1172,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1038,20 +1181,20 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1067,7 +1210,6 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -1080,7 +1222,7 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1088,7 +1230,6 @@ CONFIG_USB_MON=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1098,7 +1239,14 @@ CONFIG_USB_MON=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1135,33 +1283,42 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set -CONFIG_RTC_DRV_RX8025=y +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # -CONFIG_RTC_DRV_PPC=y +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1170,17 +1327,20 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1189,6 +1349,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1208,15 +1373,13 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1236,25 +1399,27 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1286,25 +1451,28 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1321,7 +1489,32 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1330,13 +1523,16 @@ CONFIG_FRAME_WARN=1024 # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1374,6 +1570,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1403,8 +1603,15 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig index eb4ba7a5f41f..bd1bfcddbd0c 100644 --- a/arch/powerpc/configs/85xx/stx_gp3_defconfig +++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:18 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:22 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -90,21 +101,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -114,10 +128,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -126,6 +142,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -137,7 +154,6 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -153,11 +169,6 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -173,6 +184,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set CONFIG_STX_GP3=y # CONFIG_TQM8540 is not set @@ -241,9 +253,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -269,6 +284,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -282,17 +298,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -353,6 +369,7 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_HL is not set # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set @@ -389,6 +406,7 @@ CONFIG_IP_NF_FILTER=m # CONFIG_IP_NF_TARGET_LOG is not set # CONFIG_IP_NF_TARGET_ULOG is not set # CONFIG_IP_NF_MANGLE is not set +# CONFIG_IP_NF_TARGET_TTL is not set # CONFIG_IP_NF_RAW is not set # CONFIG_IP_NF_ARPTABLES is not set # CONFIG_IP_DCCP is not set @@ -406,6 +424,7 @@ CONFIG_IP_NF_FILTER=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -418,7 +437,6 @@ CONFIG_NET_PKTGEN=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -476,13 +494,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -591,9 +616,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -617,6 +644,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -633,6 +661,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -666,6 +695,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -687,6 +718,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -697,10 +729,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -710,6 +744,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -719,6 +754,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -726,7 +762,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -778,7 +813,6 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -837,6 +871,7 @@ CONFIG_PRINTER=m # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set @@ -903,12 +938,9 @@ CONFIG_I2C_ALGOBIT=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -964,6 +996,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -978,11 +1011,15 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1075,7 +1112,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1089,7 +1125,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -1116,6 +1152,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1137,6 +1174,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1186,6 +1228,7 @@ CONFIG_CRAMFS=m # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1197,7 +1240,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1253,6 +1295,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1266,12 +1309,13 @@ CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1289,6 +1333,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1319,9 +1366,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1329,17 +1379,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1433,6 +1485,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig index f4379b1cf841..767600145fb2 100644 --- a/arch/powerpc/configs/85xx/tqm8540_defconfig +++ b/arch/powerpc/configs/85xx/tqm8540_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:19 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:23 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -89,19 +100,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -111,16 +125,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -128,7 +145,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -144,11 +160,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -164,6 +175,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set CONFIG_TQM8540=y @@ -232,9 +244,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -259,6 +274,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_HAS_RAPIDIO is not set # @@ -270,17 +286,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -336,6 +352,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -348,7 +365,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -448,7 +464,6 @@ CONFIG_MTD_CFI_UTIL=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -477,19 +492,27 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y @@ -564,6 +587,7 @@ CONFIG_BLK_DEV_IDEDMA=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -597,6 +621,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -634,6 +660,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -644,10 +671,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -657,6 +686,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -666,6 +696,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -673,7 +704,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -754,6 +784,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -816,12 +847,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -853,6 +881,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -867,11 +896,14 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -955,7 +987,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -969,7 +1000,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -985,6 +1016,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -995,6 +1027,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1016,6 +1049,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1070,6 +1108,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1079,7 +1118,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1107,6 +1145,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1122,11 +1161,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1148,13 +1188,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1245,6 +1296,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig index b8669231c1fe..52fafc006dd0 100644 --- a/arch/powerpc/configs/85xx/tqm8541_defconfig +++ b/arch/powerpc/configs/85xx/tqm8541_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:20 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:23 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -90,19 +101,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -112,10 +126,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -123,6 +139,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -130,7 +147,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -146,11 +162,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -166,6 +177,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -235,9 +247,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -262,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_HAS_RAPIDIO is not set # @@ -273,17 +289,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -339,6 +355,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -351,7 +368,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -451,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -481,19 +496,27 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y @@ -568,6 +591,7 @@ CONFIG_BLK_DEV_IDEDMA=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -601,6 +625,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -639,6 +665,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -649,10 +676,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -662,6 +691,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -671,6 +701,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -678,7 +709,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -761,6 +791,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -825,12 +856,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -885,6 +913,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -899,11 +928,15 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -988,7 +1021,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1002,7 +1034,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -1018,6 +1050,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1028,6 +1061,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1049,6 +1083,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1103,6 +1142,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1112,7 +1152,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1140,6 +1179,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1155,11 +1195,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1181,13 +1222,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1278,6 +1330,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig index 43030fea2eee..8b4faae7a9a1 100644 --- a/arch/powerpc/configs/85xx/tqm8548_defconfig +++ b/arch/powerpc/configs/85xx/tqm8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc7 -# Mon Mar 16 09:03:28 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:24 2009 # # CONFIG_PPC64 is not set @@ -59,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -99,21 +100,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -123,10 +127,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -134,6 +140,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -146,7 +153,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -177,6 +183,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -246,6 +253,8 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -278,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -302,7 +312,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -358,6 +367,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -370,7 +380,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -514,6 +523,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # @@ -548,6 +558,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -581,6 +592,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -600,6 +613,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -610,6 +624,7 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set @@ -624,6 +639,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -633,6 +649,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -640,7 +657,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -785,7 +801,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -817,6 +832,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -831,11 +847,14 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -919,7 +938,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_UWB is not set # CONFIG_MMC is not set @@ -982,8 +1000,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1008,6 +1027,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1062,6 +1086,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1071,7 +1096,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1099,6 +1123,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1114,11 +1139,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1136,6 +1162,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1166,10 +1195,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1177,17 +1208,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1281,6 +1314,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig index d5a864d74461..170360934cec 100644 --- a/arch/powerpc/configs/85xx/tqm8555_defconfig +++ b/arch/powerpc/configs/85xx/tqm8555_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:21 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:25 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -90,19 +101,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -112,10 +126,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -123,6 +139,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -130,7 +147,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -146,11 +162,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -166,6 +177,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -235,9 +247,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -262,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_HAS_RAPIDIO is not set # @@ -273,17 +289,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -339,6 +355,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -351,7 +368,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -451,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -481,19 +496,27 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y @@ -568,6 +591,7 @@ CONFIG_BLK_DEV_IDEDMA=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -601,6 +625,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -639,6 +665,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -649,10 +676,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -662,6 +691,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -671,6 +701,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -678,7 +709,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -761,6 +791,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -825,12 +856,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -885,6 +913,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -899,11 +928,15 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -988,7 +1021,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1002,7 +1034,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -1018,6 +1050,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1028,6 +1061,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1049,6 +1083,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1103,6 +1142,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1112,7 +1152,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1140,6 +1179,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1155,11 +1195,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1181,13 +1222,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1278,6 +1330,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig index a25009174f37..f41cc2444d48 100644 --- a/arch/powerpc/configs/85xx/tqm8560_defconfig +++ b/arch/powerpc/configs/85xx/tqm8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:22 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:26 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -90,19 +101,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -112,10 +126,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -123,6 +139,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -130,7 +147,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -146,11 +162,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -166,6 +177,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -235,9 +247,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -262,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_HAS_RAPIDIO is not set # @@ -273,17 +289,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -339,6 +355,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -351,7 +368,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -451,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -481,19 +496,27 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y @@ -568,6 +591,7 @@ CONFIG_BLK_DEV_IDEDMA=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -601,6 +625,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -639,6 +665,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -649,10 +676,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -662,6 +691,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -671,6 +701,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -678,7 +709,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -761,6 +791,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -825,12 +856,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -885,6 +913,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -899,11 +928,15 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -988,7 +1021,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1002,7 +1034,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -1018,6 +1050,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1028,6 +1061,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1049,6 +1083,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1103,6 +1142,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1112,7 +1152,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1140,6 +1179,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1155,11 +1195,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1181,13 +1222,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1278,6 +1330,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # -- cgit v1.2.2 From 08af66b137d9213dfc051a222144adceb41dee4b Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 13 May 2009 17:26:51 -0500 Subject: powerpc/86xx: Update defconfigs Signed-off-by: Kumar Gala --- arch/powerpc/configs/86xx/gef_ppc9a_defconfig | 92 +++++++--- arch/powerpc/configs/86xx/gef_sbc310_defconfig | 92 +++++++--- arch/powerpc/configs/86xx/gef_sbc610_defconfig | 122 +++++++++---- arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig | 100 ++++++++--- arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig | 211 +++++++++-------------- arch/powerpc/configs/86xx/sbc8641d_defconfig | 114 ++++++++---- arch/powerpc/configs/mpc86xx_defconfig | 211 +++++++++-------------- 7 files changed, 556 insertions(+), 386 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig index df2c16337794..b6a23af57f46 100644 --- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig +++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc7 -# Fri Mar 13 15:36:11 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:31 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y @@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -72,6 +74,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set @@ -100,21 +103,24 @@ CONFIG_RELAY=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -123,10 +129,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -135,6 +143,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -148,7 +157,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -169,8 +177,6 @@ CONFIG_DEFAULT_IOSCHED="cfq" # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -189,6 +195,7 @@ CONFIG_GEF_PPC9A=y # CONFIG_GEF_SBC310 is not set # CONFIG_GEF_SBC610 is not set CONFIG_MPC8641=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -250,9 +257,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -281,6 +291,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set CONFIG_PCI_DEBUG=y # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -303,7 +314,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -383,9 +393,11 @@ CONFIG_BRIDGE_NETFILTER=y # CONFIG_NETFILTER_NETLINK_QUEUE is not set # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_HL is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set @@ -398,6 +410,7 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +CONFIG_NETFILTER_XT_MATCH_HL=m # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set @@ -456,11 +469,11 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m # CONFIG_IP6_NF_MATCH_MH is not set CONFIG_IP6_NF_MATCH_RT=m +# CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m # CONFIG_IP6_NF_TARGET_REJECT is not set CONFIG_IP6_NF_MANGLE=m -# CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_RAW=m # CONFIG_IP6_NF_SECURITY is not set # CONFIG_BRIDGE_NF_EBTABLES is not set @@ -495,6 +508,7 @@ CONFIG_LLC=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set CONFIG_WAN_ROUTER=m +# CONFIG_PHONET is not set CONFIG_NET_SCHED=y # @@ -545,7 +559,6 @@ CONFIG_NET_PKTGEN=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set @@ -686,6 +699,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # @@ -751,9 +765,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -776,6 +792,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -852,6 +869,7 @@ CONFIG_SATA_SIL=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -885,6 +903,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -904,6 +924,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -914,8 +935,8 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -929,7 +950,6 @@ CONFIG_GIANFAR=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -1056,6 +1076,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -1122,7 +1143,6 @@ CONFIG_DS1682=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1178,6 +1198,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1192,11 +1213,15 @@ CONFIG_HWMON=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1315,15 +1340,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1393,11 +1420,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1439,7 +1466,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1456,6 +1482,7 @@ CONFIG_USB_STORAGE=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1517,8 +1544,9 @@ CONFIG_RTC_DRV_RX8581=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1531,6 +1559,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set @@ -1552,6 +1581,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1609,6 +1643,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1621,7 +1656,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1682,6 +1716,7 @@ CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1697,11 +1732,12 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1719,6 +1755,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1747,9 +1786,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1758,17 +1800,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1790,6 +1834,7 @@ CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_ROOTPLUG is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +# CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y # @@ -1805,10 +1850,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1878,6 +1925,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig index bd236b3d915a..a66910e63345 100644 --- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc3 -# Wed Jan 28 23:05:34 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:29 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y @@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -72,6 +74,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set @@ -96,20 +99,23 @@ CONFIG_RELAY=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -118,10 +124,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -130,6 +138,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -143,7 +152,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -165,8 +173,6 @@ CONFIG_PPC_MSI_BITMAP=y # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -181,9 +187,11 @@ CONFIG_PPC_86xx=y # CONFIG_MPC8641_HPCN is not set # CONFIG_SBC8641D is not set # CONFIG_MPC8610_HPCD is not set +# CONFIG_GEF_PPC9A is not set CONFIG_GEF_SBC310=y # CONFIG_GEF_SBC610 is not set CONFIG_MPC8641=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -245,9 +253,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -275,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -288,7 +300,6 @@ CONFIG_PCI_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 @@ -298,7 +309,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -382,6 +392,7 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -394,7 +405,6 @@ CONFIG_NET_PKTGEN=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set @@ -493,7 +503,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -529,6 +538,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # @@ -594,9 +604,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -619,6 +631,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -641,6 +654,7 @@ CONFIG_SATA_SIL24=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -674,6 +688,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -693,6 +709,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -703,11 +720,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -717,7 +735,6 @@ CONFIG_GIANFAR=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -828,6 +845,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -894,7 +912,6 @@ CONFIG_DS1682=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -949,6 +966,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -963,11 +981,15 @@ CONFIG_HWMON=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1086,15 +1108,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1164,11 +1188,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1210,7 +1234,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1226,6 +1249,7 @@ CONFIG_USB_STORAGE=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1287,8 +1311,9 @@ CONFIG_RTC_DRV_RX8581=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1301,6 +1326,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set @@ -1322,6 +1348,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1382,6 +1413,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1394,7 +1426,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1455,6 +1486,7 @@ CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1470,11 +1502,12 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1494,13 +1527,25 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1530,10 +1575,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m # CONFIG_CRYPTO_TEST is not set @@ -1602,6 +1649,7 @@ CONFIG_CRYPTO_DES=y # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig index 1ab5abae00a2..c6a7fc82b69a 100644 --- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:26 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:30 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y @@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -72,10 +74,20 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -91,21 +103,24 @@ CONFIG_RELAY=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -114,10 +129,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -126,6 +143,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -139,7 +157,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -155,18 +172,11 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -181,8 +191,11 @@ CONFIG_PPC_86xx=y # CONFIG_MPC8641_HPCN is not set # CONFIG_SBC8641D is not set # CONFIG_MPC8610_HPCD is not set +# CONFIG_GEF_PPC9A is not set +# CONFIG_GEF_SBC310 is not set CONFIG_GEF_SBC610=y CONFIG_MPC8641=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -244,9 +257,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -275,6 +291,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set CONFIG_PCI_DEBUG=y # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_HAS_RAPIDIO=y @@ -298,7 +315,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -378,9 +394,11 @@ CONFIG_BRIDGE_NETFILTER=y # CONFIG_NETFILTER_NETLINK_QUEUE is not set # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_HL is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set @@ -393,6 +411,7 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +CONFIG_NETFILTER_XT_MATCH_HL=m # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set @@ -451,11 +470,11 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m # CONFIG_IP6_NF_MATCH_MH is not set CONFIG_IP6_NF_MATCH_RT=m +# CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m # CONFIG_IP6_NF_TARGET_REJECT is not set CONFIG_IP6_NF_MANGLE=m -# CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_RAW=m # CONFIG_IP6_NF_SECURITY is not set # CONFIG_BRIDGE_NF_EBTABLES is not set @@ -490,6 +509,7 @@ CONFIG_LLC=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set CONFIG_WAN_ROUTER=m +# CONFIG_PHONET is not set CONFIG_NET_SCHED=y # @@ -540,7 +560,6 @@ CONFIG_NET_PKTGEN=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set @@ -651,7 +670,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -682,13 +700,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -746,9 +771,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -771,6 +798,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -847,6 +875,7 @@ CONFIG_SATA_SIL=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -880,6 +909,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -899,6 +930,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -909,11 +941,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -923,7 +956,6 @@ CONFIG_GIANFAR=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -1050,6 +1082,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -1113,12 +1146,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # CONFIG_DS1682=y -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1174,6 +1204,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1188,11 +1219,15 @@ CONFIG_HWMON=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1311,15 +1346,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1389,11 +1426,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1435,7 +1472,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1452,6 +1488,7 @@ CONFIG_USB_STORAGE=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1513,8 +1550,9 @@ CONFIG_RTC_DRV_RX8581=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1527,6 +1565,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set @@ -1548,6 +1587,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1595,6 +1639,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1607,7 +1652,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1668,6 +1712,7 @@ CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1681,13 +1726,14 @@ CONFIG_CRC_CCITT=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1705,6 +1751,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1733,9 +1782,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1744,17 +1796,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1776,6 +1830,7 @@ CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_ROOTPLUG is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +# CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y # @@ -1791,10 +1846,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1864,6 +1921,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig index bbdf4bfc4327..cfd2efcc6bce 100644 --- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig +++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:24 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:28 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y @@ -55,6 +56,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -72,6 +74,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -87,21 +98,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -111,10 +125,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -122,6 +138,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -134,7 +151,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -150,18 +166,11 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -176,9 +185,13 @@ CONFIG_PPC_86xx=y # CONFIG_MPC8641_HPCN is not set # CONFIG_SBC8641D is not set CONFIG_MPC8610_HPCD=y +# CONFIG_GEF_PPC9A is not set +# CONFIG_GEF_SBC310 is not set # CONFIG_GEF_SBC610 is not set CONFIG_MPC8610=y # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -238,9 +251,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=12 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -269,6 +285,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set CONFIG_PCI_DEBUG=y # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -291,7 +308,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -364,6 +380,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -376,7 +393,6 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -492,7 +508,6 @@ CONFIG_MTD_NAND_FSL_ELBC=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -521,13 +536,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -632,9 +654,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -657,6 +681,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -733,6 +758,7 @@ CONFIG_PATA_ALI=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -747,6 +773,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set # CONFIG_TULIP is not set @@ -774,7 +802,6 @@ CONFIG_ULI526X=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -929,12 +956,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1049,6 +1073,7 @@ CONFIG_FB_FSL_DIU=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -1069,6 +1094,7 @@ CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y +CONFIG_SND_JACK=y # CONFIG_SND_SEQUENCER is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y @@ -1116,6 +1142,8 @@ CONFIG_SND_PCI=y # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1165,7 +1193,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1179,7 +1206,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -1247,8 +1274,9 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1259,6 +1287,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1279,6 +1308,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1323,6 +1357,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1337,7 +1372,6 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1409,6 +1443,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1422,11 +1457,13 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1444,6 +1481,9 @@ CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1474,9 +1514,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1484,17 +1527,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1589,6 +1634,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig index 92acfdf3540a..0bee3e303942 100644 --- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig +++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:25 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:28 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y @@ -56,6 +57,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -70,11 +72,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set CONFIG_AUDIT=y # CONFIG_AUDITSYSCALL is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -90,22 +102,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -115,10 +129,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -127,6 +143,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -140,7 +157,6 @@ CONFIG_MODVERSIONS=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -156,18 +172,11 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -182,8 +191,11 @@ CONFIG_PPC_86xx=y CONFIG_MPC8641_HPCN=y # CONFIG_SBC8641D is not set # CONFIG_MPC8610_HPCD is not set +# CONFIG_GEF_PPC9A is not set +# CONFIG_GEF_SBC310 is not set # CONFIG_GEF_SBC610 is not set CONFIG_MPC8641=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -245,9 +257,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -274,6 +289,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_HAS_RAPIDIO=y @@ -297,7 +313,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -385,6 +400,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -397,7 +413,6 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set @@ -451,13 +466,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -516,9 +538,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -541,6 +565,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -617,6 +642,7 @@ CONFIG_PATA_ALI=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -650,6 +676,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -669,6 +697,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -679,11 +708,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -693,6 +723,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -702,6 +733,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -709,7 +741,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -875,12 +906,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -933,7 +961,7 @@ CONFIG_VIDEO_MEDIA=m # # CONFIG_MEDIA_ATTACH is not set CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set CONFIG_MEDIA_TUNER_SIMPLE=m CONFIG_MEDIA_TUNER_TDA8290=m CONFIG_MEDIA_TUNER_TDA9887=m @@ -942,6 +970,7 @@ CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MC44S803=m # CONFIG_DVB_DYNAMIC_MINORS is not set CONFIG_DVB_CAPTURE_DRIVERS=y @@ -981,103 +1010,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # Supported DVB Frontends # - -# -# Customise DVB Frontends -# # CONFIG_DVB_FE_CUSTOMISE is not set - -# -# Multistandard (satellite) frontends -# -# CONFIG_DVB_STB0899 is not set -# CONFIG_DVB_STB6100 is not set - -# -# DVB-S (satellite) frontends -# -# CONFIG_DVB_CX24110 is not set -# CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_MT312 is not set -# CONFIG_DVB_S5H1420 is not set -# CONFIG_DVB_STV0288 is not set -# CONFIG_DVB_STB6000 is not set -# CONFIG_DVB_STV0299 is not set -# CONFIG_DVB_TDA8083 is not set -# CONFIG_DVB_TDA10086 is not set -# CONFIG_DVB_TDA8261 is not set -# CONFIG_DVB_VES1X93 is not set -# CONFIG_DVB_TUNER_ITD1000 is not set -# CONFIG_DVB_TUNER_CX24113 is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TUA6100 is not set -# CONFIG_DVB_CX24116 is not set -# CONFIG_DVB_SI21XX is not set - -# -# DVB-T (terrestrial) frontends -# -# CONFIG_DVB_SP8870 is not set -# CONFIG_DVB_SP887X is not set -# CONFIG_DVB_CX22700 is not set -# CONFIG_DVB_CX22702 is not set -# CONFIG_DVB_DRX397XD is not set -# CONFIG_DVB_L64781 is not set -# CONFIG_DVB_TDA1004X is not set -# CONFIG_DVB_NXT6000 is not set -# CONFIG_DVB_MT352 is not set -# CONFIG_DVB_ZL10353 is not set -# CONFIG_DVB_DIB3000MB is not set -# CONFIG_DVB_DIB3000MC is not set -# CONFIG_DVB_DIB7000M is not set -# CONFIG_DVB_DIB7000P is not set -# CONFIG_DVB_TDA10048 is not set - -# -# DVB-C (cable) frontends -# -# CONFIG_DVB_VES1820 is not set -# CONFIG_DVB_TDA10021 is not set -# CONFIG_DVB_TDA10023 is not set -# CONFIG_DVB_STV0297 is not set - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -# CONFIG_DVB_NXT200X is not set -# CONFIG_DVB_OR51211 is not set -# CONFIG_DVB_OR51132 is not set -# CONFIG_DVB_BCM3510 is not set -# CONFIG_DVB_LGDT330X is not set -# CONFIG_DVB_LGDT3304 is not set -# CONFIG_DVB_S5H1409 is not set -# CONFIG_DVB_AU8522 is not set -# CONFIG_DVB_S5H1411 is not set - -# -# ISDB-T (terrestrial) frontends -# -# CONFIG_DVB_S921 is not set - -# -# Digital terrestrial only tuners/PLL -# -# CONFIG_DVB_PLL is not set -# CONFIG_DVB_TUNER_DIB0070 is not set - -# -# SEC control devices for DVB-S -# -# CONFIG_DVB_LNBP21 is not set -# CONFIG_DVB_ISL6405 is not set -# CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_LGS8GL5 is not set - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set -# CONFIG_DVB_AF9013 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1157,6 +1090,8 @@ CONFIG_SND_PCI=y # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1211,15 +1146,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1292,11 +1229,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1338,7 +1275,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1354,6 +1290,7 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1415,8 +1352,9 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1427,6 +1365,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1449,6 +1388,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1504,6 +1448,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1519,7 +1464,6 @@ CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1590,6 +1534,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1604,11 +1549,12 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1626,6 +1572,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1656,9 +1605,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1666,17 +1618,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1707,10 +1661,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1779,6 +1735,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig index 04797e730c5a..c30a0c715873 100644 --- a/arch/powerpc/configs/86xx/sbc8641d_defconfig +++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:23 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:27 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y @@ -57,6 +58,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -71,10 +73,20 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -90,21 +102,24 @@ CONFIG_RELAY=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -113,10 +128,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -125,6 +142,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -138,7 +156,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -154,18 +171,11 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -180,8 +190,11 @@ CONFIG_PPC_86xx=y # CONFIG_MPC8641_HPCN is not set CONFIG_SBC8641D=y # CONFIG_MPC8610_HPCD is not set +# CONFIG_GEF_PPC9A is not set +# CONFIG_GEF_SBC310 is not set # CONFIG_GEF_SBC610 is not set CONFIG_MPC8641=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -243,9 +256,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -274,6 +290,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -296,7 +313,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -376,9 +392,11 @@ CONFIG_BRIDGE_NETFILTER=y # CONFIG_NETFILTER_NETLINK_QUEUE is not set # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_HL is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set @@ -391,6 +409,7 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +CONFIG_NETFILTER_XT_MATCH_HL=m # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set @@ -449,11 +468,11 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m # CONFIG_IP6_NF_MATCH_MH is not set CONFIG_IP6_NF_MATCH_RT=m +# CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m # CONFIG_IP6_NF_TARGET_REJECT is not set CONFIG_IP6_NF_MANGLE=m -# CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_RAW=m # CONFIG_IP6_NF_SECURITY is not set # CONFIG_BRIDGE_NF_EBTABLES is not set @@ -488,6 +507,7 @@ CONFIG_LLC=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set CONFIG_WAN_ROUTER=m +# CONFIG_PHONET is not set CONFIG_NET_SCHED=y # @@ -538,7 +558,6 @@ CONFIG_NET_PKTGEN=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set @@ -649,7 +668,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -678,13 +696,20 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -729,6 +754,7 @@ CONFIG_DM_ZERO=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -762,6 +788,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -781,6 +809,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -791,11 +820,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -805,7 +835,6 @@ CONFIG_GIANFAR=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -923,6 +952,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set @@ -985,12 +1015,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1022,6 +1049,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1036,11 +1064,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1145,7 +1176,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1159,7 +1189,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -1175,6 +1205,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1187,6 +1218,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set @@ -1227,6 +1259,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1269,8 +1306,13 @@ CONFIG_MINIX_FS=m # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=m +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1283,7 +1325,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1346,6 +1387,7 @@ CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1359,13 +1401,14 @@ CONFIG_CRC_CCITT=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1383,6 +1426,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1411,9 +1457,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1422,17 +1471,20 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1454,6 +1506,7 @@ CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +# CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y # @@ -1469,10 +1522,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1542,6 +1597,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig index adc756e1f252..5bb1b8eb0b49 100644 --- a/arch/powerpc/configs/mpc86xx_defconfig +++ b/arch/powerpc/configs/mpc86xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:39 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:00 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y @@ -57,6 +58,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -71,11 +73,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set CONFIG_AUDIT=y # CONFIG_AUDITSYSCALL is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -91,22 +103,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -116,10 +130,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -128,6 +144,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -141,7 +158,6 @@ CONFIG_MODVERSIONS=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -157,18 +173,11 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -183,9 +192,12 @@ CONFIG_PPC_86xx=y CONFIG_MPC8641_HPCN=y CONFIG_SBC8641D=y CONFIG_MPC8610_HPCD=y +# CONFIG_GEF_PPC9A is not set +# CONFIG_GEF_SBC310 is not set CONFIG_GEF_SBC610=y CONFIG_MPC8641=y CONFIG_MPC8610=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -247,9 +259,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -276,6 +291,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_HAS_RAPIDIO=y @@ -299,7 +315,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -387,6 +402,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -399,7 +415,6 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set @@ -454,13 +469,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -519,9 +541,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -544,6 +568,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -620,6 +645,7 @@ CONFIG_PATA_ALI=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -653,6 +679,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -672,6 +700,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -682,11 +711,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -696,6 +726,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -705,6 +736,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -712,7 +744,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -879,12 +910,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -963,7 +991,7 @@ CONFIG_VIDEO_MEDIA=m # # CONFIG_MEDIA_ATTACH is not set CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set CONFIG_MEDIA_TUNER_SIMPLE=m CONFIG_MEDIA_TUNER_TDA8290=m CONFIG_MEDIA_TUNER_TDA9887=m @@ -972,6 +1000,7 @@ CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MC44S803=m # CONFIG_DVB_DYNAMIC_MINORS is not set CONFIG_DVB_CAPTURE_DRIVERS=y @@ -1011,103 +1040,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # Supported DVB Frontends # - -# -# Customise DVB Frontends -# # CONFIG_DVB_FE_CUSTOMISE is not set - -# -# Multistandard (satellite) frontends -# -# CONFIG_DVB_STB0899 is not set -# CONFIG_DVB_STB6100 is not set - -# -# DVB-S (satellite) frontends -# -# CONFIG_DVB_CX24110 is not set -# CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_MT312 is not set -# CONFIG_DVB_S5H1420 is not set -# CONFIG_DVB_STV0288 is not set -# CONFIG_DVB_STB6000 is not set -# CONFIG_DVB_STV0299 is not set -# CONFIG_DVB_TDA8083 is not set -# CONFIG_DVB_TDA10086 is not set -# CONFIG_DVB_TDA8261 is not set -# CONFIG_DVB_VES1X93 is not set -# CONFIG_DVB_TUNER_ITD1000 is not set -# CONFIG_DVB_TUNER_CX24113 is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TUA6100 is not set -# CONFIG_DVB_CX24116 is not set -# CONFIG_DVB_SI21XX is not set - -# -# DVB-T (terrestrial) frontends -# -# CONFIG_DVB_SP8870 is not set -# CONFIG_DVB_SP887X is not set -# CONFIG_DVB_CX22700 is not set -# CONFIG_DVB_CX22702 is not set -# CONFIG_DVB_DRX397XD is not set -# CONFIG_DVB_L64781 is not set -# CONFIG_DVB_TDA1004X is not set -# CONFIG_DVB_NXT6000 is not set -# CONFIG_DVB_MT352 is not set -# CONFIG_DVB_ZL10353 is not set -# CONFIG_DVB_DIB3000MB is not set -# CONFIG_DVB_DIB3000MC is not set -# CONFIG_DVB_DIB7000M is not set -# CONFIG_DVB_DIB7000P is not set -# CONFIG_DVB_TDA10048 is not set - -# -# DVB-C (cable) frontends -# -# CONFIG_DVB_VES1820 is not set -# CONFIG_DVB_TDA10021 is not set -# CONFIG_DVB_TDA10023 is not set -# CONFIG_DVB_STV0297 is not set - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -# CONFIG_DVB_NXT200X is not set -# CONFIG_DVB_OR51211 is not set -# CONFIG_DVB_OR51132 is not set -# CONFIG_DVB_BCM3510 is not set -# CONFIG_DVB_LGDT330X is not set -# CONFIG_DVB_LGDT3304 is not set -# CONFIG_DVB_S5H1409 is not set -# CONFIG_DVB_AU8522 is not set -# CONFIG_DVB_S5H1411 is not set - -# -# ISDB-T (terrestrial) frontends -# -# CONFIG_DVB_S921 is not set - -# -# Digital terrestrial only tuners/PLL -# -# CONFIG_DVB_PLL is not set -# CONFIG_DVB_TUNER_DIB0070 is not set - -# -# SEC control devices for DVB-S -# -# CONFIG_DVB_LNBP21 is not set -# CONFIG_DVB_ISL6405 is not set -# CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_LGS8GL5 is not set - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set -# CONFIG_DVB_AF9013 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1187,6 +1120,8 @@ CONFIG_SND_PCI=y # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1241,15 +1176,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1322,11 +1259,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1368,7 +1305,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1385,6 +1321,7 @@ CONFIG_USB_STORAGE=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1446,8 +1383,9 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1458,6 +1396,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1480,6 +1419,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1535,6 +1479,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1550,7 +1495,6 @@ CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1621,6 +1565,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1635,11 +1580,12 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1657,6 +1603,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1687,9 +1636,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1697,17 +1649,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1738,10 +1692,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1810,6 +1766,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # -- cgit v1.2.2 From 25991b90d7087c9ced2a31cacae4cb4655348a41 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 13 May 2009 17:28:42 -0500 Subject: powerpc/embedded6xx: Update defconfigs Signed-off-by: Kumar Gala --- arch/powerpc/configs/c2k_defconfig | 128 +++++++++++++++++++--------- arch/powerpc/configs/ep8248e_defconfig | 74 +++++++++++----- arch/powerpc/configs/linkstation_defconfig | 96 ++++++++++++++++----- arch/powerpc/configs/mgcoge_defconfig | 74 +++++++++++----- arch/powerpc/configs/mpc7448_hpc2_defconfig | 91 +++++++++++++++----- arch/powerpc/configs/mpc8272_ads_defconfig | 77 ++++++++++++----- arch/powerpc/configs/pq2fads_defconfig | 90 +++++++++++++------ arch/powerpc/configs/prpmc2800_defconfig | 120 +++++++++++++++++++------- arch/powerpc/configs/storcenter_defconfig | 71 ++++++++++----- 9 files changed, 600 insertions(+), 221 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig index 5103319a7f56..9ffa8de92803 100644 --- a/arch/powerpc/configs/c2k_defconfig +++ b/arch/powerpc/configs/c2k_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:26 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:51 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -56,6 +57,7 @@ CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -70,12 +72,22 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_AUDIT_TREE=y + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 CONFIG_GROUP_SCHED=y @@ -92,23 +104,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -118,6 +134,7 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -133,6 +150,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -145,7 +163,6 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -161,18 +178,11 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -192,6 +202,8 @@ CONFIG_EMBEDDED6xx=y # CONFIG_PPC_PRPMC2800 is not set CONFIG_PPC_C2K=y CONFIG_MV64X60=y +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -268,9 +280,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -295,6 +310,7 @@ CONFIG_PCI_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set CONFIG_HOTPLUG_PCI=y # CONFIG_HOTPLUG_PCI_FAKE is not set @@ -315,15 +331,11 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 -CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -# CONFIG_NET_NS is not set -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -364,7 +376,7 @@ CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_LRO=m +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -403,9 +415,11 @@ CONFIG_BRIDGE_NETFILTER=y # CONFIG_NETFILTER_NETLINK_QUEUE is not set # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_HL is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set @@ -419,6 +433,7 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +CONFIG_NETFILTER_XT_MATCH_HL=m # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set @@ -508,11 +523,11 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m # CONFIG_IP6_NF_MATCH_MH is not set CONFIG_IP6_NF_MATCH_RT=m +# CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m # CONFIG_IP6_NF_TARGET_REJECT is not set CONFIG_IP6_NF_MANGLE=m -# CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_RAW=m # CONFIG_IP6_NF_SECURITY is not set CONFIG_BRIDGE_NF_EBTABLES=m @@ -544,6 +559,7 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set # CONFIG_TIPC is not set CONFIG_ATM=m CONFIG_ATM_CLIP=m @@ -566,6 +582,7 @@ CONFIG_LLC=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set CONFIG_NET_SCHED=y # @@ -612,6 +629,7 @@ CONFIG_NET_SCH_FIFO=y # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set @@ -638,7 +656,6 @@ CONFIG_BT_HCIBCM203X=m CONFIG_BT_HCIBFUSB=m CONFIG_BT_HCIVHCI=m # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set @@ -748,7 +765,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -846,9 +862,11 @@ CONFIG_MEGARAID_MM=m CONFIG_MEGARAID_MAILBOX=m # CONFIG_MEGARAID_LEGACY is not set CONFIG_MEGARAID_SAS=m +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -875,6 +893,7 @@ CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -891,6 +910,7 @@ CONFIG_SCSI_LPFC=m # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -924,6 +944,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -943,6 +965,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -957,6 +980,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -966,7 +990,6 @@ CONFIG_MV643XX_ETH=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -1084,6 +1107,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_NVRAM=m CONFIG_GEN_RTC=m # CONFIG_GEN_RTC_X is not set @@ -1150,12 +1174,9 @@ CONFIG_I2C_MV64XXX=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=m CONFIG_SENSORS_PCF8574=m # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -CONFIG_SENSORS_PCF8591=m # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1187,6 +1208,7 @@ CONFIG_SENSORS_DS1621=m # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set CONFIG_SENSORS_GL518SM=m # CONFIG_SENSORS_GL520SM is not set CONFIG_SENSORS_IT87=m @@ -1201,11 +1223,14 @@ CONFIG_SENSORS_LM87=m CONFIG_SENSORS_LM90=m # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set CONFIG_SENSORS_MAX1619=m # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +CONFIG_SENSORS_PCF8591=m # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set CONFIG_SENSORS_SMSC47M1=m @@ -1363,21 +1388,21 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y +CONFIG_USB_STORAGE_DATAFAB=m +CONFIG_USB_STORAGE_FREECOM=m +CONFIG_USB_STORAGE_ISD200=m # CONFIG_USB_STORAGE_USBAT is not set -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y +CONFIG_USB_STORAGE_SDDR09=m +CONFIG_USB_STORAGE_SDDR55=m +CONFIG_USB_STORAGE_JUMPSHOT=m # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set @@ -1402,7 +1427,7 @@ CONFIG_USB_SERIAL_BELKIN=m # CONFIG_USB_SERIAL_CH341 is not set CONFIG_USB_SERIAL_WHITEHEAT=m CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CP210X is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m @@ -1438,12 +1463,14 @@ CONFIG_USB_SERIAL_MCT_U232=m # CONFIG_USB_SERIAL_NAVMAN is not set CONFIG_USB_SERIAL_PL2303=m # CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set # CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set CONFIG_USB_SERIAL_SAFE=m CONFIG_USB_SERIAL_SAFE_PADDED=y # CONFIG_USB_SERIAL_SIEMENS_MPI is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set # CONFIG_USB_SERIAL_TI is not set CONFIG_USB_SERIAL_CYBERJACK=m CONFIG_USB_SERIAL_XIRCOM=m @@ -1466,7 +1493,6 @@ CONFIG_USB_LCD=m CONFIG_USB_LED=m # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1487,6 +1513,7 @@ CONFIG_USB_SPEEDTOUCH=m # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1516,6 +1543,7 @@ CONFIG_DMADEVICES=y # # DMA Devices # +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1524,6 +1552,7 @@ CONFIG_DMADEVICES=y # # CONFIG_EXT2_FS is not set CONFIG_EXT3_FS=m +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y @@ -1553,6 +1582,11 @@ CONFIG_QUOTACTL=y CONFIG_AUTOFS4_FS=m # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1612,6 +1646,7 @@ CONFIG_VXFS_FS=m # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1626,7 +1661,6 @@ CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_SUNRPC_XPRT_RDMA=m -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m # CONFIG_SMB_FS is not set @@ -1637,6 +1671,7 @@ CONFIG_CIFS=m CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y # CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_DFS_UPCALL is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1704,6 +1739,7 @@ CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +CONFIG_BINARY_PRINTF=y # # Library routines @@ -1719,12 +1755,15 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_CHECK_SIGNATURE=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1742,6 +1781,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1775,12 +1817,15 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1788,18 +1833,21 @@ CONFIG_TRACING=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1830,6 +1878,7 @@ CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set +# CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y # @@ -1845,10 +1894,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m # CONFIG_CRYPTO_TEST is not set @@ -1918,6 +1969,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig index add6419c15d9..04915c3a43f6 100644 --- a/arch/powerpc/configs/ep8248e_defconfig +++ b/arch/powerpc/configs/ep8248e_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:27 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:52 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -55,6 +56,7 @@ CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -71,6 +73,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -82,20 +93,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -104,10 +114,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -115,6 +127,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -122,7 +135,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -137,18 +149,11 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -167,6 +172,8 @@ CONFIG_8272=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -222,9 +229,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -250,6 +260,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -272,7 +283,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -353,6 +363,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -364,7 +375,6 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -468,7 +478,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -517,6 +526,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -550,6 +560,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -572,6 +584,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000 is not set # CONFIG_E1000E is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_R8169 is not set @@ -581,8 +594,8 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_JME is not set @@ -594,6 +607,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -603,6 +617,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -610,7 +625,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -662,6 +676,7 @@ CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set @@ -751,8 +766,10 @@ CONFIG_DAB=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -763,6 +780,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -780,6 +798,10 @@ CONFIG_INOTIFY_USER=y CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set +# +# Caches +# + # # CD-ROM/DVD Filesystems # @@ -894,6 +916,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -907,11 +930,11 @@ CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -927,6 +950,7 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set # CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -955,9 +979,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -965,16 +992,18 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1005,9 +1034,11 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set @@ -1071,6 +1102,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index 15900dcf0bfa..a4053ab9e244 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc6 -# Fri Mar 6 00:07:38 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:54 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -68,6 +70,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set @@ -100,21 +103,24 @@ CONFIG_NAMESPACES=y # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -124,10 +130,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -135,6 +143,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -147,7 +156,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -168,8 +176,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -191,6 +197,8 @@ CONFIG_LINKSTATION=y CONFIG_MPC10X_BRIDGE=y CONFIG_MPC10X_OPENPIC=y # CONFIG_MPC10X_STORE_GATHERING is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -250,9 +258,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -277,6 +288,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -299,7 +311,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -371,6 +382,7 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set +CONFIG_NETFILTER_XT_TARGET_HL=m # CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set @@ -379,6 +391,7 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_TRACE is not set # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set # CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set # CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set @@ -389,6 +402,7 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # CONFIG_NETFILTER_XT_MATCH_HELPER is not set +# CONFIG_NETFILTER_XT_MATCH_HL is not set # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set @@ -465,6 +479,7 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -477,7 +492,6 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -625,6 +639,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # @@ -690,9 +705,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -715,6 +732,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -791,6 +809,7 @@ CONFIG_PATA_SIL680=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -805,6 +824,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set CONFIG_TULIP=y @@ -833,6 +854,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -843,8 +865,8 @@ CONFIG_R8169=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -858,6 +880,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -867,6 +890,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -874,7 +898,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -985,6 +1008,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -1050,7 +1074,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1082,6 +1105,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1096,11 +1120,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1195,7 +1222,6 @@ CONFIG_HID=m # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1250,11 +1276,11 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -1290,7 +1316,7 @@ CONFIG_USB_SERIAL_CONSOLE=y # CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CP210X is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set CONFIG_USB_SERIAL_FTDI_SIO=y @@ -1314,11 +1340,13 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_SERIAL_NAVMAN is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set # CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_SIEMENS_MPI is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set @@ -1341,7 +1369,6 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1357,6 +1384,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1418,8 +1446,9 @@ CONFIG_RTC_DRV_RS5C372=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1430,6 +1459,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1455,6 +1485,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1507,6 +1542,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1524,7 +1560,6 @@ CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1584,6 +1619,7 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1597,15 +1633,18 @@ CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1623,6 +1662,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1652,9 +1694,12 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1662,17 +1707,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1703,10 +1750,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1776,6 +1825,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig index c58c38d5b7a6..31e1df665157 100644 --- a/arch/powerpc/configs/mgcoge_defconfig +++ b/arch/powerpc/configs/mgcoge_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:30 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:55 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -57,6 +58,7 @@ CONFIG_HIBERNATE_32=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -83,23 +94,25 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -108,10 +121,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -119,6 +134,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -126,7 +142,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -141,18 +156,11 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y CONFIG_PPC_CHRP=y # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -171,7 +179,9 @@ CONFIG_8272=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set CONFIG_PPC_NATIVE=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_IPIC is not set CONFIG_MPIC=y @@ -231,9 +241,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -260,6 +273,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -282,7 +296,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -344,6 +357,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -355,7 +369,6 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -464,7 +477,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -517,6 +529,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -551,6 +564,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -576,7 +591,6 @@ CONFIG_FS_ENET_HAS_SCC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -631,6 +645,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set @@ -720,8 +735,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -732,6 +749,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -750,6 +768,10 @@ CONFIG_INOTIFY_USER=y CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set +# +# Caches +# + # # CD-ROM/DVD Filesystems # @@ -872,6 +894,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -887,11 +910,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -907,6 +931,7 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set # CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -935,9 +960,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -945,16 +973,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -986,9 +1017,11 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set @@ -1052,6 +1085,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig index 38712e861c46..642ab67c8431 100644 --- a/arch/powerpc/configs/mpc7448_hpc2_defconfig +++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:33 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:56 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y @@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -71,6 +73,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -85,20 +96,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -108,16 +122,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -125,7 +142,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -141,18 +157,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -172,6 +181,8 @@ CONFIG_MPC7448HPC2=y # CONFIG_PPC_PRPMC2800 is not set # CONFIG_PPC_C2K is not set CONFIG_TSI108_BRIDGE=y +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y CONFIG_MPIC_WEIRD=y @@ -230,9 +241,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -255,6 +269,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -277,7 +292,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -333,6 +347,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -345,7 +360,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -392,12 +406,16 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -454,9 +472,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -479,6 +499,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -554,6 +575,7 @@ CONFIG_SATA_MV=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -587,6 +609,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -628,6 +652,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -639,10 +664,10 @@ CONFIG_NETDEV_1000=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_TSI108_ETH=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -652,6 +677,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -661,6 +687,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -668,7 +695,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -839,7 +865,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -853,7 +878,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -869,6 +894,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -879,6 +905,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -901,6 +928,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -944,6 +976,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -953,7 +986,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -985,6 +1017,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -998,11 +1031,13 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1024,13 +1059,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1122,6 +1168,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig index d85a43cb821f..cb966ca2ce89 100644 --- a/arch/powerpc/configs/mpc8272_ads_defconfig +++ b/arch/powerpc/configs/mpc8272_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:35 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:57 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -55,6 +56,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -71,6 +73,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -82,20 +93,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -105,10 +115,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -116,6 +128,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -123,7 +136,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -138,18 +150,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -169,6 +174,8 @@ CONFIG_PQ2_ADS_PCI_PIC=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -225,9 +232,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -253,6 +263,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -275,7 +286,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -356,6 +366,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -367,7 +378,6 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -472,7 +482,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -521,6 +530,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -554,6 +564,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -576,6 +588,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000 is not set # CONFIG_E1000E is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_R8169 is not set @@ -585,8 +598,8 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_JME is not set @@ -598,6 +611,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -607,6 +621,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -614,7 +629,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -668,7 +682,6 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -719,6 +732,7 @@ CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set @@ -809,8 +823,10 @@ CONFIG_DAB=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -821,6 +837,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -841,6 +858,10 @@ CONFIG_INOTIFY_USER=y CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set +# +# Caches +# + # # CD-ROM/DVD Filesystems # @@ -956,6 +977,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -971,11 +993,11 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -993,6 +1015,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1022,9 +1047,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1032,16 +1060,18 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1072,9 +1102,11 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set @@ -1138,6 +1170,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig index fdded96633a1..129d80860f2a 100644 --- a/arch/powerpc/configs/pq2fads_defconfig +++ b/arch/powerpc/configs/pq2fads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:42 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:02 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -55,6 +56,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -71,6 +73,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -81,22 +92,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -106,10 +119,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -117,6 +132,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -124,7 +140,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -139,18 +154,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -169,6 +177,8 @@ CONFIG_PQ2_ADS_PCI_PIC=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -225,9 +235,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -254,6 +267,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -276,7 +290,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -357,6 +370,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -368,7 +382,6 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -473,7 +486,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -498,10 +510,14 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -573,6 +589,7 @@ CONFIG_IDE_PROC_FS=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -606,6 +623,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -628,6 +647,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000 is not set # CONFIG_E1000E is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_R8169 is not set @@ -637,8 +657,8 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_JME is not set @@ -650,6 +670,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -659,6 +680,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -666,7 +688,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -720,7 +741,6 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -773,6 +793,7 @@ CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set @@ -868,7 +889,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_GADGET_MUSB_HDRC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set @@ -907,13 +928,16 @@ CONFIG_USB_ETH_RNDIS=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -924,6 +948,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -944,6 +969,10 @@ CONFIG_INOTIFY_USER=y CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set +# +# Caches +# + # # CD-ROM/DVD Filesystems # @@ -1059,6 +1088,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1074,11 +1104,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1096,6 +1127,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1125,9 +1159,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1135,16 +1172,18 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1175,9 +1214,11 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set @@ -1241,6 +1282,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig index e971db171138..e9f287f313fa 100644 --- a/arch/powerpc/configs/prpmc2800_defconfig +++ b/arch/powerpc/configs/prpmc2800_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:44 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:03 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y @@ -56,6 +57,7 @@ CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -70,9 +72,19 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -89,22 +101,26 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -114,16 +130,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,7 +150,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,18 +165,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -178,6 +189,8 @@ CONFIG_EMBEDDED6xx=y CONFIG_PPC_PRPMC2800=y # CONFIG_PPC_C2K is not set CONFIG_MV64X60=y +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -237,9 +250,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -262,6 +278,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -279,15 +296,11 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 -CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -# CONFIG_NET_NS is not set -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -318,7 +331,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -343,6 +356,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -355,7 +369,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -459,7 +472,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -489,19 +501,27 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y @@ -605,9 +625,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -630,6 +652,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -707,6 +730,7 @@ CONFIG_MACINTOSH_DRIVERS=y # CONFIG_MAC_EMUMOUSEBTN is not set # CONFIG_WINDFARM is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -740,6 +764,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -781,6 +807,7 @@ CONFIG_E1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -795,6 +822,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -804,6 +832,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -813,6 +842,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -820,7 +850,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -975,12 +1004,9 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1012,6 +1038,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1026,11 +1053,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1127,15 +1157,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y +CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1202,11 +1234,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # # CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set @@ -1236,7 +1268,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1252,6 +1283,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1313,8 +1345,9 @@ CONFIG_RTC_DRV_MAX6900=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1325,6 +1358,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1347,6 +1381,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1391,6 +1430,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1400,7 +1440,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1432,6 +1471,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1445,11 +1485,15 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1471,13 +1515,24 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1569,6 +1624,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig index 94903465ea12..bd4a8d435c50 100644 --- a/arch/powerpc/configs/storcenter_defconfig +++ b/arch/powerpc/configs/storcenter_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc6 -# Fri Mar 6 00:09:08 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:04 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -95,17 +97,17 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -115,16 +117,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -137,7 +142,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -158,8 +162,6 @@ CONFIG_DEFAULT_IOSCHED="cfq" # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -181,6 +183,8 @@ CONFIG_STORCENTER=y CONFIG_MPC10X_BRIDGE=y CONFIG_MPC10X_OPENPIC=y # CONFIG_MPC10X_STORE_GATHERING is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -239,9 +243,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -266,6 +273,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -288,7 +296,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=m # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -339,6 +346,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -351,7 +359,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -486,6 +493,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # @@ -500,6 +508,7 @@ CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y @@ -604,9 +613,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -628,6 +639,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y @@ -637,7 +649,7 @@ CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=y -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=y # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set @@ -655,6 +667,7 @@ CONFIG_MD_RAID5_RESHAPE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -671,6 +684,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -681,8 +695,8 @@ CONFIG_R8169=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -696,7 +710,6 @@ CONFIG_R8169=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -766,6 +779,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -831,7 +845,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -952,11 +965,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -997,7 +1010,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1013,6 +1025,7 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1074,8 +1087,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1086,6 +1100,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1112,6 +1127,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1166,6 +1186,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set CONFIG_EXPORTFS=m @@ -1231,6 +1252,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1246,11 +1268,11 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1272,13 +1294,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 -- cgit v1.2.2 From 2e15eedffaae555085071c68cb94b9eeed2245be Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 13 May 2009 17:29:08 -0500 Subject: powerpc/8xx: Update defconfigs Signed-off-by: Kumar Gala --- arch/powerpc/configs/adder875_defconfig | 65 ++++++++++++++++++-------- arch/powerpc/configs/ep88xc_defconfig | 63 +++++++++++++++++-------- arch/powerpc/configs/mgsuvd_defconfig | 72 +++++++++++++++++++++-------- arch/powerpc/configs/mpc866_ads_defconfig | 77 ++++++++++++++++++++++--------- arch/powerpc/configs/mpc885_ads_defconfig | 63 +++++++++++++++++-------- 5 files changed, 241 insertions(+), 99 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig index aaab5cc3751c..74f7f7c6fdc4 100644 --- a/arch/powerpc/configs/adder875_defconfig +++ b/arch/powerpc/configs/adder875_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:24 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:50 2009 # # CONFIG_PPC64 is not set @@ -53,6 +53,7 @@ CONFIG_GENERIC_BUG=y CONFIG_REDBOOT=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -70,6 +71,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -85,19 +95,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -CONFIG_COMPAT_BRK=y # CONFIG_BASE_FULL is not set # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -106,10 +116,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -117,13 +129,13 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -139,11 +151,6 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -233,9 +240,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -270,14 +280,11 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 -CONFIG_CONSISTENT_START=0xfd000000 -CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -328,6 +335,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -340,7 +348,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -439,7 +446,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -463,6 +469,7 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -491,6 +498,8 @@ CONFIG_DAVICOM_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -511,7 +520,6 @@ CONFIG_FS_ENET_MDIO_FEC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -558,7 +566,6 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -606,6 +613,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -675,6 +683,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -698,6 +707,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -742,6 +756,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -753,7 +768,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -785,6 +799,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -802,6 +817,7 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -819,6 +835,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -845,9 +864,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -855,17 +877,20 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig index b2fdfd9e183c..c2a439595f4d 100644 --- a/arch/powerpc/configs/ep88xc_defconfig +++ b/arch/powerpc/configs/ep88xc_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:28 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:53 2009 # # CONFIG_PPC64 is not set @@ -52,6 +52,7 @@ CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -69,6 +70,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -84,19 +94,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -CONFIG_COMPAT_BRK=y # CONFIG_BASE_FULL is not set # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -105,10 +115,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -116,13 +128,13 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -138,11 +150,6 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -233,9 +240,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -270,14 +280,11 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 -CONFIG_CONSISTENT_START=0xfd000000 -CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -328,6 +335,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -340,7 +348,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -439,7 +446,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -463,6 +469,7 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -491,6 +498,8 @@ CONFIG_LXT_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -511,7 +520,6 @@ CONFIG_FS_ENET_MDIO_FEC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -562,6 +570,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -631,6 +640,7 @@ CONFIG_DAB=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -654,6 +664,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -698,6 +713,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -709,7 +725,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -741,6 +756,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -758,6 +774,7 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -775,6 +792,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -801,9 +821,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -811,17 +834,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig index 297b5d5042be..24fa90792c54 100644 --- a/arch/powerpc/configs/mgsuvd_defconfig +++ b/arch/powerpc/configs/mgsuvd_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:32 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:55 2009 # # CONFIG_PPC64 is not set @@ -51,6 +51,7 @@ CONFIG_AUDIT_ARCH=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -68,6 +69,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 CONFIG_GROUP_SCHED=y @@ -82,20 +92,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y # CONFIG_BUG is not set CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y # CONFIG_BASE_FULL is not set CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -103,10 +116,12 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -114,6 +129,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -121,7 +137,6 @@ CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -137,11 +152,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -232,9 +242,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -268,14 +281,11 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 -CONFIG_CONSISTENT_START=0xfd000000 -CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -331,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -343,7 +354,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -447,7 +457,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -483,6 +492,7 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -511,6 +521,8 @@ CONFIG_FIXED_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -531,7 +543,6 @@ CONFIG_FS_ENET_HAS_SCC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -582,6 +593,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -651,6 +663,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -663,6 +676,7 @@ CONFIG_EXT2_FS_XATTR=y # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -685,6 +699,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -739,6 +758,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -750,7 +770,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -782,6 +801,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -797,11 +817,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -819,13 +840,25 @@ CONFIG_DEBUG_FS=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -917,6 +950,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig index 1793d08e9c01..3add6f62b21e 100644 --- a/arch/powerpc/configs/mpc866_ads_defconfig +++ b/arch/powerpc/configs/mpc866_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:38 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:00 2009 # # CONFIG_PPC64 is not set @@ -51,6 +51,7 @@ CONFIG_AUDIT_ARCH=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -68,6 +69,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -83,18 +93,18 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y # CONFIG_BUG is not set CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y # CONFIG_BASE_FULL is not set CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -103,10 +113,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -114,6 +126,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -121,7 +134,6 @@ CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -137,11 +149,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -232,9 +239,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -268,14 +278,11 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 -CONFIG_CONSISTENT_START=0xfd000000 -CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -331,6 +338,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -343,7 +351,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -379,9 +386,13 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -396,6 +407,7 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -424,6 +436,8 @@ CONFIG_FIXED_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -437,6 +451,7 @@ CONFIG_FS_ENET_HAS_SCC=y CONFIG_FS_ENET_HAS_FEC=y CONFIG_FS_ENET_MDIO_FEC=y CONFIG_NETDEV_1000=y +# CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set CONFIG_NETDEV_10000=y @@ -445,7 +460,6 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -492,7 +506,6 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -540,6 +553,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -622,7 +636,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -635,7 +648,7 @@ CONFIG_USB_SUPPORT=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -649,6 +662,7 @@ CONFIG_USB_SUPPORT=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -661,6 +675,7 @@ CONFIG_EXT2_FS_XATTR=y # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -682,6 +697,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -725,6 +745,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -736,7 +757,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -768,6 +788,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -782,11 +803,11 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -806,13 +827,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -903,6 +935,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig index 4b76321c0ec4..42e64ebc279d 100644 --- a/arch/powerpc/configs/mpc885_ads_defconfig +++ b/arch/powerpc/configs/mpc885_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:41 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:01 2009 # # CONFIG_PPC64 is not set @@ -52,6 +52,7 @@ CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -69,6 +70,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -84,19 +94,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -CONFIG_COMPAT_BRK=y # CONFIG_BASE_FULL is not set # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -105,10 +115,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -116,13 +128,13 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -138,11 +150,6 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -240,9 +247,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -277,14 +287,11 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 -CONFIG_CONSISTENT_START=0xfd000000 -CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -335,6 +342,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -347,7 +355,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -450,7 +457,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -474,6 +480,7 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -502,6 +509,8 @@ CONFIG_DAVICOM_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -522,7 +531,6 @@ CONFIG_FS_ENET_MDIO_FEC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -573,6 +581,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -642,6 +651,7 @@ CONFIG_DAB=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -665,6 +675,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -709,6 +724,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -720,7 +736,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -752,6 +767,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -769,6 +785,7 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -786,6 +803,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -812,9 +832,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -822,17 +845,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set -- cgit v1.2.2 From c34e6e8bdd99c746b7844c937c3a2529ef2c4437 Mon Sep 17 00:00:00 2001 From: "Kevin D. Kissell" Date: Tue, 31 Mar 2009 12:59:24 +0200 Subject: MIPS: SMTC: Bring set/clear/change_c0_## return value semantics uptodate. Signed-off-by: Kevin D. Kissell Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mipsregs.h | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 526f327475ce..1f7987793782 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -1484,14 +1484,15 @@ static inline unsigned int \ set_c0_##name(unsigned int set) \ { \ unsigned int res; \ + unsigned int new; \ unsigned int omt; \ unsigned long flags; \ \ local_irq_save(flags); \ omt = __dmt(); \ res = read_c0_##name(); \ - res |= set; \ - write_c0_##name(res); \ + new = res | set; \ + write_c0_##name(new); \ __emt(omt); \ local_irq_restore(flags); \ \ @@ -1502,14 +1503,15 @@ static inline unsigned int \ clear_c0_##name(unsigned int clear) \ { \ unsigned int res; \ + unsigned int new; \ unsigned int omt; \ unsigned long flags; \ \ local_irq_save(flags); \ omt = __dmt(); \ res = read_c0_##name(); \ - res &= ~clear; \ - write_c0_##name(res); \ + new = res & ~clear; \ + write_c0_##name(new); \ __emt(omt); \ local_irq_restore(flags); \ \ @@ -1517,9 +1519,10 @@ clear_c0_##name(unsigned int clear) \ } \ \ static inline unsigned int \ -change_c0_##name(unsigned int change, unsigned int new) \ +change_c0_##name(unsigned int change, unsigned int newbits) \ { \ unsigned int res; \ + unsigned int new; \ unsigned int omt; \ unsigned long flags; \ \ @@ -1527,9 +1530,9 @@ change_c0_##name(unsigned int change, unsigned int new) \ \ omt = __dmt(); \ res = read_c0_##name(); \ - res &= ~change; \ - res |= (new & change); \ - write_c0_##name(res); \ + new = res & ~change; \ + new |= (newbits & change); \ + write_c0_##name(new); \ __emt(omt); \ local_irq_restore(flags); \ \ -- cgit v1.2.2 From bcf11801e77946533767bbb368130220e241d824 Mon Sep 17 00:00:00 2001 From: "Kevin D. Kissell" Date: Tue, 31 Mar 2009 13:10:32 +0200 Subject: MIPS: SMTC: Fix xxx_clockevent_init() naming conflict for SMTC Commit 779e7d41ad004946603da139da99ba775f74cb1c created a name collision in SMTC builds. The attached patch corrects this in a a not-too-terribly-ugly manner. Note that the SMTC case has to come first, because CEVT_R4K will also be true. Signed-off-by: Kevin D. Kissell Signed-off-by: Ralf Baechle --- arch/mips/include/asm/time.h | 6 +++++- arch/mips/kernel/cevt-smtc.c | 2 +- 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h index 38a30d2ee959..e46f23f54a50 100644 --- a/arch/mips/include/asm/time.h +++ b/arch/mips/include/asm/time.h @@ -57,7 +57,11 @@ extern int r4k_clockevent_init(void); static inline int mips_clockevent_init(void) { -#ifdef CONFIG_CEVT_R4K +#ifdef CONFIG_MIPS_MT_SMTC + extern int smtc_clockevent_init(void); + + return smtc_clockevent_init(); +#elif CONFIG_CEVT_R4K return r4k_clockevent_init(); #else return -ENXIO; diff --git a/arch/mips/kernel/cevt-smtc.c b/arch/mips/kernel/cevt-smtc.c index 6d45e24db5bf..df6f5bc60572 100644 --- a/arch/mips/kernel/cevt-smtc.c +++ b/arch/mips/kernel/cevt-smtc.c @@ -245,7 +245,7 @@ irqreturn_t c0_compare_interrupt(int irq, void *dev_id) } -int __cpuinit mips_clockevent_init(void) +int __cpuinit smtc_clockevent_init(void) { uint64_t mips_freq = mips_hpt_frequency; unsigned int cpu = smp_processor_id(); -- cgit v1.2.2 From b7863ee144a99ff54fee90d851e24d73f38af661 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Tue, 31 Mar 2009 18:51:27 +0200 Subject: MIPS: Alchemy: Fix AU1100 interrupt numbers off-by-one Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-au1x00/au1000.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h index 62f91f50b5b5..87a16598ebc3 100644 --- a/arch/mips/include/asm/mach-au1x00/au1000.h +++ b/arch/mips/include/asm/mach-au1x00/au1000.h @@ -715,7 +715,7 @@ enum soc_au1500_ints { #ifdef CONFIG_SOC_AU1100 enum soc_au1100_ints { AU1100_FIRST_INT = MIPS_CPU_IRQ_BASE + 8, - AU1100_UART0_INT, + AU1100_UART0_INT = AU1100_FIRST_INT, AU1100_UART1_INT, AU1100_SD_INT, AU1100_UART3_INT, -- cgit v1.2.2 From d16797b304a4701a7d156f47773c6d2e456b64ee Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Tue, 31 Mar 2009 18:51:28 +0200 Subject: MIPS: Alchemy: Add missing Au1200 GPIO203 interrupt Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-au1x00/au1000.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h index 87a16598ebc3..854e95f1b07c 100644 --- a/arch/mips/include/asm/mach-au1x00/au1000.h +++ b/arch/mips/include/asm/mach-au1x00/au1000.h @@ -902,8 +902,8 @@ enum soc_au1200_ints { AU1000_RTC_MATCH0_INT, AU1000_RTC_MATCH1_INT, AU1000_RTC_MATCH2_INT, - - AU1200_NAND_INT = AU1200_FIRST_INT + 23, + AU1200_GPIO_203, + AU1200_NAND_INT, AU1200_GPIO_204, AU1200_GPIO_205, AU1200_GPIO_206, -- cgit v1.2.2 From 1d9c114dc1702306215439cd608047ab639700db Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Tue, 31 Mar 2009 18:44:36 +0200 Subject: MIPS: au1xxx-ide: Fix build with CONFIG_PM au1xxx_power_dev_t? is never defined; get rid of all PM stuff as well since it is not in the driver source anyway. Signed-off-by: Manuel Lauss Acked-by: Sergei Shtylyov Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-au1x00/au1xxx_ide.h | 17 ----------------- 1 file changed, 17 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h index 60638b8969ba..5656c72de6d3 100644 --- a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h @@ -46,20 +46,6 @@ #define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON 0 #endif -#ifdef CONFIG_PM -/* - * This will enable the device to be powered up when write() or read() - * is called. If this is not defined, the driver will return -EBUSY. - */ -#define WAKE_ON_ACCESS 1 - -typedef struct { - spinlock_t lock; /* Used to block on state transitions */ - au1xxx_power_dev_t *dev; /* Power Managers device structure */ - unsigned stopped; /* Used to signal device is stopped */ -} pm_state; -#endif - typedef struct { u32 tx_dev_id, rx_dev_id, target_dev_id; u32 tx_chan, rx_chan; @@ -72,9 +58,6 @@ typedef struct { #endif int irq; u32 regbase; -#ifdef CONFIG_PM - pm_state pm; -#endif } _auide_hwif; /******************************************************************************/ -- cgit v1.2.2 From 1291417eb61d1cd3fc69e295c2e9b83c5f6a8ff9 Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Mon, 30 Mar 2009 22:53:23 +0300 Subject: MIPS: IP32: Two symbols can become static The file arch/mips/mm/sc-rm7k.c needlessly defines two global symbols: rm7k_sc_ops rm7k_tcache_enabled This patch makes these symbols static. Signed-off-by: Dmitri Vorobiev Signed-off-by: Ralf Baechle --- arch/mips/mm/sc-rm7k.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/mm/sc-rm7k.c b/arch/mips/mm/sc-rm7k.c index e3abfb2d7e86..de69bfbf506e 100644 --- a/arch/mips/mm/sc-rm7k.c +++ b/arch/mips/mm/sc-rm7k.c @@ -29,7 +29,7 @@ extern unsigned long icache_way_size, dcache_way_size; #include -int rm7k_tcache_enabled; +static int rm7k_tcache_enabled; /* * Writeback and invalidate the primary cache dcache before DMA. @@ -121,7 +121,7 @@ static void rm7k_sc_disable(void) clear_c0_config(RM7K_CONF_SE); } -struct bcache_ops rm7k_sc_ops = { +static struct bcache_ops rm7k_sc_ops = { .bc_enable = rm7k_sc_enable, .bc_disable = rm7k_sc_disable, .bc_wback_inv = rm7k_sc_wback_inv, -- cgit v1.2.2 From 36a09d7848abf017ea11ea949372f46edc1350da Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Mon, 30 Mar 2009 22:53:24 +0300 Subject: MIPS: IP32: ip32_be_handler symbol is needlessly defined global The file arch/mips/sgi-ip32/ip32-berr.c needlessly defines the function ip32_be_handler() as global, and this patch makes it static. Signed-off-by: Dmitri Vorobiev Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip32/ip32-berr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/sgi-ip32/ip32-berr.c b/arch/mips/sgi-ip32/ip32-berr.c index a278e918a019..afc1cadbba37 100644 --- a/arch/mips/sgi-ip32/ip32-berr.c +++ b/arch/mips/sgi-ip32/ip32-berr.c @@ -16,7 +16,7 @@ #include #include -int ip32_be_handler(struct pt_regs *regs, int is_fixup) +static int ip32_be_handler(struct pt_regs *regs, int is_fixup) { int data = regs->cp0_cause & 4; -- cgit v1.2.2 From ae5373874a393d36d0fbc1a21c1b81e52736a4f2 Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Mon, 30 Mar 2009 22:53:25 +0300 Subject: MIPS: IP32: Fix needlessly global symbols in arch/mips/sgi-ip32/ip32-irq.c The following symbols are needlessly defined global: cpuerr_irq and memerr_irq. This patch makes the symbols static. Signed-off-by: Dmitri Vorobiev Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip32/ip32-irq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c index 83a0b3c359da..5c2bf111ca67 100644 --- a/arch/mips/sgi-ip32/ip32-irq.c +++ b/arch/mips/sgi-ip32/ip32-irq.c @@ -112,13 +112,13 @@ static void inline flush_mace_bus(void) extern irqreturn_t crime_memerr_intr(int irq, void *dev_id); extern irqreturn_t crime_cpuerr_intr(int irq, void *dev_id); -struct irqaction memerr_irq = { +static struct irqaction memerr_irq = { .handler = crime_memerr_intr, .flags = IRQF_DISABLED, .name = "CRIME memory error", }; -struct irqaction cpuerr_irq = { +static struct irqaction cpuerr_irq = { .handler = crime_cpuerr_intr, .flags = IRQF_DISABLED, .name = "CRIME CPU error", -- cgit v1.2.2 From 7fc7316aa82fb3874f69689bd36134afea9c8bfd Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 1 Apr 2009 16:11:53 +0200 Subject: MIPS: Print the actual detected I-cache associativity on bootup. Signed-off-by: Ralf Baechle --- arch/mips/mm/c-r4k.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 58d9075e86fe..171951d2305b 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -1041,7 +1041,7 @@ static void __cpuinit probe_pcache(void) printk("Primary instruction cache %ldkB, %s, %s, linesize %d bytes.\n", icache_size >> 10, - cpu_has_vtag_icache ? "VIVT" : "VIPT", + c->icache.flags & MIPS_CACHE_VTAG ? "VIVT" : "VIPT", way_string[c->icache.ways], c->icache.linesz); printk("Primary data cache %ldkB, %s, %s, %s, linesize %d bytes\n", -- cgit v1.2.2 From a575b8453944c5911a2a6f51d0096fffba82dd48 Mon Sep 17 00:00:00 2001 From: Zhang Le Date: Thu, 2 Apr 2009 15:41:45 +0800 Subject: MIPS: Add Loongson cpu-feature-overrides.h I have taken Wu Zhangjin's and Philippe Vachon's version as references, did a little modification and tested on 16K page size kernel. It works well. Unfornately although it already has defined cpu_has_dc_aliases as 1, 4k page size still not working. More work needed here. Signed-off-by: Zhang Le Signed-off-by: Ralf Baechle --- .../asm/mach-lemote/cpu-feature-overrides.h | 59 ++++++++++++++++++++++ 1 file changed, 59 insertions(+) create mode 100644 arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h (limited to 'arch') diff --git a/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h b/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h new file mode 100644 index 000000000000..550a10dc9dba --- /dev/null +++ b/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h @@ -0,0 +1,59 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2009 Wu Zhangjin + * Copyright (C) 2009 Philippe Vachon + * Copyright (C) 2009 Zhang Le + * + * reference: /proc/cpuinfo, + * arch/mips/kernel/cpu-probe.c(cpu_probe_legacy), + * arch/mips/kernel/proc.c(show_cpuinfo), + * loongson2f user manual. + */ + +#ifndef __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H + +#define cpu_dcache_line_size() 32 +#define cpu_icache_line_size() 32 +#define cpu_scache_line_size() 32 + + +#define cpu_has_32fpr 1 +#define cpu_has_3k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_4kex 1 +#define cpu_has_64bits 1 +#define cpu_has_cache_cdex_p 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_counter 1 +#define cpu_has_dc_aliases 1 +#define cpu_has_divec 0 +#define cpu_has_dsp 0 +#define cpu_has_ejtag 0 +#define cpu_has_fpu 1 +#define cpu_has_ic_fills_f_dc 0 +#define cpu_has_inclusive_pcaches 1 +#define cpu_has_llsc 1 +#define cpu_has_mcheck 0 +#define cpu_has_mdmx 0 +#define cpu_has_mips16 0 +#define cpu_has_mips32r1 0 +#define cpu_has_mips32r2 0 +#define cpu_has_mips3d 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 +#define cpu_has_mipsmt 0 +#define cpu_has_prefetch 0 +#define cpu_has_smartmips 0 +#define cpu_has_tlb 1 +#define cpu_has_tx39_cache 0 +#define cpu_has_userlocal 0 +#define cpu_has_vce 0 +#define cpu_has_vtag_icache 0 +#define cpu_has_watch 1 +#define cpu_icache_snoops_remote_store 1 + +#endif /* __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H */ -- cgit v1.2.2 From 592e527f5b7c17e9be8fc58a63c3f918827b4b92 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 6 Apr 2009 00:31:22 +0200 Subject: MIPS: Fix build error if CONFIG_CEVT_R4K is undefined. Introduced by 99aa5029937ee926e3b249369e208d7013cd381b. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/time.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h index e46f23f54a50..df6a430de5eb 100644 --- a/arch/mips/include/asm/time.h +++ b/arch/mips/include/asm/time.h @@ -61,7 +61,7 @@ static inline int mips_clockevent_init(void) extern int smtc_clockevent_init(void); return smtc_clockevent_init(); -#elif CONFIG_CEVT_R4K +#elif defined(CONFIG_CEVT_R4K) return r4k_clockevent_init(); #else return -ENXIO; -- cgit v1.2.2 From c7d16736b8759f45a49d318bf3a8ca7fed7b6962 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 16 Apr 2009 09:20:17 -0700 Subject: MIPS: Compat: Use generic 32-bit wrapers for sys_timerfd_{g,s}ettime The LTP timerfd01 test is failing (blocking forever) on the 32-bit ABIs. We need to use the compat_* wrappers for these system calls. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/kernel/scall64-n32.S | 4 ++-- arch/mips/kernel/scall64-o32.S | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index c2c16ef9218f..93cc672f4522 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -405,8 +405,8 @@ EXPORT(sysn32_call_table) PTR sys_eventfd PTR sys_fallocate PTR sys_timerfd_create - PTR sys_timerfd_gettime /* 5285 */ - PTR sys_timerfd_settime + PTR compat_sys_timerfd_gettime /* 5285 */ + PTR compat_sys_timerfd_settime PTR sys_signalfd4 PTR sys_eventfd2 PTR sys_epoll_create1 diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 002fac27021e..a5598b2339dd 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -525,8 +525,8 @@ sys_call_table: PTR sys_eventfd PTR sys32_fallocate /* 4320 */ PTR sys_timerfd_create - PTR sys_timerfd_gettime - PTR sys_timerfd_settime + PTR compat_sys_timerfd_gettime + PTR compat_sys_timerfd_settime PTR compat_sys_signalfd4 PTR sys_eventfd2 /* 4325 */ PTR sys_epoll_create1 -- cgit v1.2.2 From dfe99b9c4ef62fa6ea20fa06b6f5c9819039c52d Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Thu, 16 Apr 2009 02:22:21 +0900 Subject: MIPS: RBTX4939: Fix typo in system name Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/rbtx4939/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c index 011e1e332f47..4199c6fd4d1d 100644 --- a/arch/mips/txx9/rbtx4939/setup.c +++ b/arch/mips/txx9/rbtx4939/setup.c @@ -536,7 +536,7 @@ static void __init rbtx4939_setup(void) } struct txx9_board_vec rbtx4939_vec __initdata = { - .system = "Tothiba RBTX4939", + .system = "Toshiba RBTX4939", .prom_init = rbtx4939_prom_init, .mem_setup = rbtx4939_setup, .irq_setup = rbtx4939_irq_setup, -- cgit v1.2.2 From 6cec2a0ac57d2ebef495a46d7866ae86e8d0e508 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sat, 11 Apr 2009 23:31:50 +0900 Subject: MIPS: Do not include seccomp.h from compat.h The compat.h does not need seccomp.h since TIF_32BIT was moved to thread_info.h This fixes a build error of 64-bit kernel without CONFIG_SECCOMP. Signed-off-by: Atsushi Nemoto Acked-by: : David Daney Signed-off-by: Ralf Baechle --- arch/mips/include/asm/compat.h | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h index 6c5b40905dd6..f58aed354bfd 100644 --- a/arch/mips/include/asm/compat.h +++ b/arch/mips/include/asm/compat.h @@ -3,7 +3,6 @@ /* * Architecture specific compatibility types */ -#include #include #include #include -- cgit v1.2.2 From 5d57c31e5790d44905af0459a21086dbad167d26 Mon Sep 17 00:00:00 2001 From: Zhang Le Date: Wed, 15 Apr 2009 17:01:52 +0800 Subject: MIPS: Loongson 2 needs no hazard barriers. Quoting from Loongson2FUserGuide.pdf: 5.22.1 Hazards The processor detects most of the pipeline hazards in hardware, including CP0 hazards and load hazards. No NOP instructions are required to correct instruction sequences. Signed-off-by: Zhang Le Signed-off-by: Ralf Baechle --- arch/mips/include/asm/hazards.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h index a12d971db4f9..0eaf77ffbc4f 100644 --- a/arch/mips/include/asm/hazards.h +++ b/arch/mips/include/asm/hazards.h @@ -138,8 +138,9 @@ do { \ __instruction_hazard(); \ } while (0) -#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \ - defined(CONFIG_CPU_R5500) || defined(CONFIG_MACH_ALCHEMY) +#elif defined(CONFIG_MACH_ALCHEMY) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \ + defined(CONFIG_CPU_LOONGSON2) || defined(CONFIG_CPU_R10000) || \ + defined(CONFIG_CPU_R5500) /* * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer. -- cgit v1.2.2 From 47740eb887796608fb4c629aa6b8507a2fb6c0eb Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 19 Apr 2009 03:21:22 +0200 Subject: MIPS: Enable CLO / CLZ instructions via separate CPU property This is useful for IDT RC32332, RC32334 and NEC VR5500 processors which do not implement the full MIPS32 / MIPS64 architecture. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/bitops.h | 4 ++-- arch/mips/include/asm/cpu-features.h | 9 +++++++++ 2 files changed, 11 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h index bac4a960b24c..b1e9e97a9c78 100644 --- a/arch/mips/include/asm/bitops.h +++ b/arch/mips/include/asm/bitops.h @@ -567,7 +567,7 @@ static inline unsigned long __fls(unsigned long word) int num; if (BITS_PER_LONG == 32 && - __builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) { + __builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) { __asm__( " .set push \n" " .set mips32 \n" @@ -644,7 +644,7 @@ static inline int fls(int x) { int r; - if (__builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) { + if (__builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) { __asm__("clz %0, %1" : "=r" (x) : "r" (x)); return 32 - x; diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h index a0d14f85b781..c0047f861337 100644 --- a/arch/mips/include/asm/cpu-features.h +++ b/arch/mips/include/asm/cpu-features.h @@ -147,6 +147,15 @@ #define cpu_has_mips_r (cpu_has_mips32r1 | cpu_has_mips32r2 | \ cpu_has_mips64r1 | cpu_has_mips64r2) +/* + * MIPS32, MIPS64, VR5500, IDT32332, IDT32334 and maybe a few other + * pre-MIPS32/MIPS53 processors have CLO, CLZ. For 64-bit kernels + * cpu_has_clo_clz also indicates the availability of DCLO and DCLZ. + */ +# ifndef cpu_has_clo_clz +# define cpu_has_clo_clz cpu_has_mips_r +# endif + #ifndef cpu_has_dsp #define cpu_has_dsp (cpu_data[0].ases & MIPS_ASE_DSP) #endif -- cgit v1.2.2 From 4f29c057aa81c5440f06b716f768ba9f8a041fe9 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Fri, 23 Jan 2009 00:42:11 +0900 Subject: MIPS: Synchronize dma_map_page and dma_map_single Synchronize dma_map_page/dma_unmap_page and dma_map_single/dma_unmap_single. This will reduce unnecessary writebacks and invalidates. [Ralf: make dma_unmap_page an inline function.] Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/include/asm/dma-mapping.h | 9 +++++++-- arch/mips/mm/dma-default.c | 19 +------------------ 2 files changed, 8 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h index c64afb40cd06..d16afddb09a9 100644 --- a/arch/mips/include/asm/dma-mapping.h +++ b/arch/mips/include/asm/dma-mapping.h @@ -24,8 +24,13 @@ extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, enum dma_data_direction direction); extern dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset, size_t size, enum dma_data_direction direction); -extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address, - size_t size, enum dma_data_direction direction); + +static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address, + size_t size, enum dma_data_direction direction) +{ + dma_unmap_single(dev, dma_address, size, direction); +} + extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, enum dma_data_direction direction); extern void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c index bed56f1ac837..4fdb7f5216b9 100644 --- a/arch/mips/mm/dma-default.c +++ b/arch/mips/mm/dma-default.c @@ -209,7 +209,7 @@ dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long addr; addr = (unsigned long) page_address(page) + offset; - dma_cache_wback_inv(addr, size); + __dma_sync(addr, size, direction); } return plat_map_dma_mem_page(dev, page) + offset; @@ -217,23 +217,6 @@ dma_addr_t dma_map_page(struct device *dev, struct page *page, EXPORT_SYMBOL(dma_map_page); -void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - if (!plat_device_is_coherent(dev) && direction != DMA_TO_DEVICE) { - unsigned long addr; - - addr = dma_addr_to_virt(dma_address); - dma_cache_wback_inv(addr, size); - } - - plat_unmap_dma_mem(dev, dma_address); -} - -EXPORT_SYMBOL(dma_unmap_page); - void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, enum dma_data_direction direction) { -- cgit v1.2.2 From 740ebe4a54fae1705705ec87ce511b16ffb50659 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Fri, 3 Apr 2009 01:01:21 +0900 Subject: MIPS: TXx9: Fix possible overflow in clock calculations Addition of -fwrapv option in 2.6.29 discloses possible overflow with signed arithmetics. For example, result of "a * 6 / 12" (int a = 400000000) is 200000000 without -fwrapv but -157913941 with -fwrapv. Change some variable to unsigned to avoid such overflows. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/generic/setup_tx4927.c | 2 +- arch/mips/txx9/generic/setup_tx4938.c | 2 +- arch/mips/txx9/generic/setup_tx4939.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c index 914e93c62639..1093549df1a8 100644 --- a/arch/mips/txx9/generic/setup_tx4927.c +++ b/arch/mips/txx9/generic/setup_tx4927.c @@ -88,7 +88,7 @@ void __init tx4927_setup(void) { int i; __u32 divmode; - int cpuclk = 0; + unsigned int cpuclk = 0; u64 ccfg; txx9_reg_res_init(TX4927_REV_PCODE(), TX4927_REG_BASE, diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c index f0844f891f0b..3925219b8973 100644 --- a/arch/mips/txx9/generic/setup_tx4938.c +++ b/arch/mips/txx9/generic/setup_tx4938.c @@ -93,7 +93,7 @@ void __init tx4938_setup(void) { int i; __u32 divmode; - int cpuclk = 0; + unsigned int cpuclk = 0; u64 ccfg; txx9_reg_res_init(TX4938_REV_PCODE(), TX4938_REG_BASE, diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c index 7a25b573e9b0..c2bf150c8838 100644 --- a/arch/mips/txx9/generic/setup_tx4939.c +++ b/arch/mips/txx9/generic/setup_tx4939.c @@ -114,7 +114,7 @@ void __init tx4939_setup(void) int i; __u32 divmode; __u64 pcfg; - int cpuclk = 0; + unsigned int cpuclk = 0; txx9_reg_res_init(TX4939_REV_PCODE(), TX4939_REG_BASE, TX4939_REG_SIZE); -- cgit v1.2.2 From c52399bece85cd4b157dd772e9f20551f9f18d2f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 2 Apr 2009 14:07:10 +0200 Subject: MIPS: Cavium: Add support for 8k and 32k page sizes. Beyond the requirements of the architecture standard Cavium also supports 8k and 32k pages. Signed-off-by: Ralf Baechle Acked-by: David Daney --- arch/mips/Kconfig | 16 ++++++++++++---- arch/mips/include/asm/mipsregs.h | 11 +++++++++++ arch/mips/include/asm/page.h | 3 +++ arch/mips/include/asm/pgtable-64.h | 6 ++++++ arch/mips/include/asm/thread_info.h | 3 +++ arch/mips/lib/dump_tlb.c | 9 +++++++++ 6 files changed, 44 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 998e5db8cc0f..023aa2d46503 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1411,13 +1411,12 @@ config PAGE_SIZE_4KB config PAGE_SIZE_8KB bool "8kB" - depends on EXPERIMENTAL && CPU_R8000 + depends on (EXPERIMENTAL && CPU_R8000) || CPU_CAVIUM_OCTEON help Using 8kB page size will result in higher performance kernel at the price of higher memory consumption. This option is available - only on the R8000 processor. Not that at the time of this writing - this option is still high experimental; there are also issues with - compatibility of user applications. + only on R8000 and cnMIPS processors. Note that you will need a + suitable Linux distribution to support this. config PAGE_SIZE_16KB bool "16kB" @@ -1428,6 +1427,15 @@ config PAGE_SIZE_16KB all non-R3000 family processors. Note that you will need a suitable Linux distribution to support this. +config PAGE_SIZE_32KB + bool "32kB" + depends on CPU_CAVIUM_OCTEON + help + Using 32kB page size will result in higher performance kernel at + the price of higher memory consumption. This option is available + only on cnMIPS cores. Note that you will need a suitable Linux + distribution to support this. + config PAGE_SIZE_64KB bool "64kB" depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 1f7987793782..0ef30c81fea6 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -184,12 +184,19 @@ #else #define PM_4K 0x00000000 +#define PM_8K 0x00002000 #define PM_16K 0x00006000 +#define PM_32K 0x0000e000 #define PM_64K 0x0001e000 +#define PM_128K 0x0003e000 #define PM_256K 0x0007e000 +#define PM_512K 0x000fe000 #define PM_1M 0x001fe000 +#define PM_2M 0x003fe000 #define PM_4M 0x007fe000 +#define PM_8M 0x00ffe000 #define PM_16M 0x01ffe000 +#define PM_32M 0x03ffe000 #define PM_64M 0x07ffe000 #define PM_256M 0x1fffe000 #define PM_1G 0x7fffe000 @@ -201,8 +208,12 @@ */ #ifdef CONFIG_PAGE_SIZE_4KB #define PM_DEFAULT_MASK PM_4K +#elif defined(CONFIG_PAGE_SIZE_8KB) +#define PM_DEFAULT_MASK PM_8K #elif defined(CONFIG_PAGE_SIZE_16KB) #define PM_DEFAULT_MASK PM_16K +#elif defined(CONFIG_PAGE_SIZE_32KB) +#define PM_DEFAULT_MASK PM_32K #elif defined(CONFIG_PAGE_SIZE_64KB) #define PM_DEFAULT_MASK PM_64K #else diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h index fe7a88ea066e..9f946e4ca057 100644 --- a/arch/mips/include/asm/page.h +++ b/arch/mips/include/asm/page.h @@ -23,6 +23,9 @@ #ifdef CONFIG_PAGE_SIZE_16KB #define PAGE_SHIFT 14 #endif +#ifdef CONFIG_PAGE_SIZE_32KB +#define PAGE_SHIFT 15 +#endif #ifdef CONFIG_PAGE_SIZE_64KB #define PAGE_SHIFT 16 #endif diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h index 943515f0ef87..4ed9d1bba2ba 100644 --- a/arch/mips/include/asm/pgtable-64.h +++ b/arch/mips/include/asm/pgtable-64.h @@ -83,6 +83,12 @@ #define PMD_ORDER 0 #define PTE_ORDER 0 #endif +#ifdef CONFIG_PAGE_SIZE_32KB +#define PGD_ORDER 0 +#define PUD_ORDER aieeee_attempt_to_allocate_pud +#define PMD_ORDER 0 +#define PTE_ORDER 0 +#endif #ifdef CONFIG_PAGE_SIZE_64KB #define PGD_ORDER 0 #define PUD_ORDER aieeee_attempt_to_allocate_pud diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h index 676aa2ae1913..143a48136a4b 100644 --- a/arch/mips/include/asm/thread_info.h +++ b/arch/mips/include/asm/thread_info.h @@ -75,6 +75,9 @@ register struct thread_info *__current_thread_info __asm__("$28"); #ifdef CONFIG_PAGE_SIZE_16KB #define THREAD_SIZE_ORDER (0) #endif +#ifdef CONFIG_PAGE_SIZE_32KB +#define THREAD_SIZE_ORDER (0) +#endif #ifdef CONFIG_PAGE_SIZE_64KB #define THREAD_SIZE_ORDER (0) #endif diff --git a/arch/mips/lib/dump_tlb.c b/arch/mips/lib/dump_tlb.c index 779821cd54ab..3f69725556af 100644 --- a/arch/mips/lib/dump_tlb.c +++ b/arch/mips/lib/dump_tlb.c @@ -19,6 +19,15 @@ static inline const char *msk2str(unsigned int mask) case PM_16K: return "16kb"; case PM_64K: return "64kb"; case PM_256K: return "256kb"; +#ifdef CONFIG_CPU_CAVIUM_OCTEON + case PM_8K: return "8kb"; + case PM_32K: return "32kb"; + case PM_128K: return "128kb"; + case PM_512K: return "512kb"; + case PM_2M: return "2Mb"; + case PM_8M: return "8Mb"; + case PM_32M: return "32Mb"; +#endif #ifndef CONFIG_CPU_VR41XX case PM_1M: return "1Mb"; case PM_4M: return "4Mb"; -- cgit v1.2.2 From 237e5a3443e5531336b880bbaf3e7bac110330f7 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 20 Apr 2009 13:43:05 +0200 Subject: MIPS: Kconfig: Delete duplicate definition of RWSEM_GENERIC_SPINLOCK. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 023aa2d46503..09b1287a92ce 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1966,10 +1966,6 @@ config SECCOMP endmenu -config RWSEM_GENERIC_SPINLOCK - bool - default y - config LOCKDEP_SUPPORT bool default y -- cgit v1.2.2 From ad058e95f943e26205aa916b83b85ccb21bd4812 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Wed, 22 Apr 2009 08:01:48 +0200 Subject: MIPS: Alchemy: Timer build fix Fix breakage introduced by 8e19608e8b5c001e4a66ce482edc474f05fb7355. Signed-off-by: Manuel Lauss Signed-off-by: Ralf Baechle --- arch/mips/alchemy/common/time.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c index f58d4ffb8945..33fbae79af5e 100644 --- a/arch/mips/alchemy/common/time.c +++ b/arch/mips/alchemy/common/time.c @@ -44,7 +44,7 @@ extern int allow_au1k_wait; /* default off for CP0 Counter */ -static cycle_t au1x_counter1_read(void) +static cycle_t au1x_counter1_read(struct clocksource *cs) { return au_readl(SYS_RTCREAD); } -- cgit v1.2.2 From 1699e5c9c414f0e3b393eb87c4acfc319fe7a1c4 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 21 Apr 2009 23:31:12 +0200 Subject: MIPS: IP27: Fix clash with NMI_OFFSET from hardirq.h There was already a define for NMI_OFFSET in asm/sn/addr.h, which now clashes with linux/hardirq.h. Rename the one in sn/addr.h to fix IP27 builds.. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/include/asm/sn/addrs.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/sn/addrs.h b/arch/mips/include/asm/sn/addrs.h index fec9bdd34913..3a56d90abfa6 100644 --- a/arch/mips/include/asm/sn/addrs.h +++ b/arch/mips/include/asm/sn/addrs.h @@ -359,11 +359,11 @@ TO_NODE_UNCAC((nasid), LAUNCH_OFFSET(nasid, slice)) #define LAUNCH_SIZE(nasid) KLD_LAUNCH(nasid)->size -#define NMI_OFFSET(nasid, slice) \ +#define SN_NMI_OFFSET(nasid, slice) \ (KLD_NMI(nasid)->offset + \ KLD_NMI(nasid)->stride * (slice)) #define NMI_ADDR(nasid, slice) \ - TO_NODE_UNCAC((nasid), NMI_OFFSET(nasid, slice)) + TO_NODE_UNCAC((nasid), SN_NMI_OFFSET(nasid, slice)) #define NMI_SIZE(nasid) KLD_NMI(nasid)->size #define KLCONFIG_OFFSET(nasid) KLD_KLCONFIG(nasid)->offset -- cgit v1.2.2 From d0aab922b19aaaef13c946236cc71ab9b7f895ee Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 27 Apr 2009 15:31:34 +0200 Subject: MIPS: Make access_ok() sideeffect proof. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/uaccess.h | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h index 09ff5bb17445..42b9cec2ee96 100644 --- a/arch/mips/include/asm/uaccess.h +++ b/arch/mips/include/asm/uaccess.h @@ -104,11 +104,21 @@ #define __access_mask get_fs().seg -#define __access_ok(addr, size, mask) \ - (((signed long)((mask) & ((addr) | ((addr) + (size)) | __ua_size(size)))) == 0) +#define __access_ok(addr, size, mask) \ +({ \ + const volatile void __user *__up = addr; \ + unsigned long __addr = (unsigned long) __up; \ + unsigned long __size = size; \ + unsigned long __mask = mask; \ + unsigned long __ok; \ + \ + __ok = (signed long)(__mask & (__addr | (__addr + __size) | \ + __ua_size(__size))); \ + __ok == 0; \ +}) #define access_ok(type, addr, size) \ - likely(__access_ok((unsigned long)(addr), (size), __access_mask)) + likely(__access_ok((addr), (size), __access_mask)) /* * put_user: - Write a simple value into user space. -- cgit v1.2.2 From ed01b3d240b76dc1b93d08833832f9ce51a11f02 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 27 Apr 2009 16:46:21 +0200 Subject: MIPS: Make uaccess.h slightly more sparse friendly. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/uaccess.h | 39 +++++++++++++++++++++++++++------------ 1 file changed, 27 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h index 42b9cec2ee96..5c0876073f13 100644 --- a/arch/mips/include/asm/uaccess.h +++ b/arch/mips/include/asm/uaccess.h @@ -104,17 +104,17 @@ #define __access_mask get_fs().seg -#define __access_ok(addr, size, mask) \ -({ \ - const volatile void __user *__up = addr; \ - unsigned long __addr = (unsigned long) __up; \ - unsigned long __size = size; \ - unsigned long __mask = mask; \ - unsigned long __ok; \ - \ - __ok = (signed long)(__mask & (__addr | (__addr + __size) | \ - __ua_size(__size))); \ - __ok == 0; \ +#define __access_ok(addr, size, mask) \ +({ \ + unsigned long __addr = (unsigned long) (addr); \ + unsigned long __size = size; \ + unsigned long __mask = mask; \ + unsigned long __ok; \ + \ + __chk_user_ptr(addr); \ + __ok = (signed long)(__mask & (__addr | (__addr + __size) | \ + __ua_size(__size))); \ + __ok == 0; \ }) #define access_ok(type, addr, size) \ @@ -235,6 +235,7 @@ do { \ ({ \ int __gu_err; \ \ + __chk_user_ptr(ptr); \ __get_user_common((x), size, ptr); \ __gu_err; \ }) @@ -315,6 +316,7 @@ do { \ __typeof__(*(ptr)) __pu_val; \ int __pu_err = 0; \ \ + __chk_user_ptr(ptr); \ __pu_val = (x); \ switch (size) { \ case 1: __put_user_asm("sb", ptr); break; \ @@ -882,7 +884,20 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); __cu_len; \ }) -#define __copy_in_user(to, from, n) __copy_from_user(to, from, n) +#define __copy_in_user(to, from, n) \ +({ \ + void __user *__cu_to; \ + const void __user *__cu_from; \ + long __cu_len; \ + \ + might_sleep(); \ + __cu_to = (to); \ + __cu_from = (from); \ + __cu_len = (n); \ + __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ + __cu_len); \ + __cu_len; \ +}) #define copy_in_user(to, from, n) \ ({ \ -- cgit v1.2.2 From 01caec8396eff7d519e6d85c5a1c860e7d4714e5 Mon Sep 17 00:00:00 2001 From: Shane McDonald Date: Mon, 27 Apr 2009 23:50:21 -0600 Subject: MIPS: MSP71xx: Resolve multiple definition of plat_timer_setup There have been a number of compile problems with the msp71xx configuration ever since it was included in the linux-mips.org repository. This patch resolves the "multiple definition of plat_timer_setup" problem, and creates the required get_c0_compare_int function. This patch has been compile-tested against the current HEAD. Signed-off-by: Shane McDonald Signed-off-by: Ralf Baechle --- arch/mips/pmc-sierra/msp71xx/msp_time.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/mips/pmc-sierra/msp71xx/msp_time.c b/arch/mips/pmc-sierra/msp71xx/msp_time.c index 7cfeda5a651b..cca64e15f57f 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_time.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_time.c @@ -81,10 +81,7 @@ void __init plat_time_init(void) mips_hpt_frequency = cpu_rate/2; } -void __init plat_timer_setup(struct irqaction *irq) +unsigned int __init get_c0_compare_int(void) { -#ifdef CONFIG_IRQ_MSP_CIC - /* we are using the vpe0 counter for timer interrupts */ - setup_irq(MSP_INT_VPE0_TIMER, irq); -#endif + return MSP_INT_VPE0_TIMER; } -- cgit v1.2.2 From 005076a16bd4c5ea60905ff475e8af57d60578f1 Mon Sep 17 00:00:00 2001 From: Shane McDonald Date: Mon, 27 Apr 2009 23:52:25 -0600 Subject: MIPS: MSP71xx: Resolve use of non-existent GPIO routines in msp71xx reset There have been a number of compile problems with the msp71xx configuration ever since it was included in the linux-mips.org repository. This patch resolves compilation problems with attempting to reset the board using non-existent GPIO routines. This patch has been compile-tested against the current HEAD. Signed-off-by: Shane McDonald Signed-off-by: Ralf Baechle --- arch/mips/pmc-sierra/msp71xx/msp_setup.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/mips/pmc-sierra/msp71xx/msp_setup.c b/arch/mips/pmc-sierra/msp71xx/msp_setup.c index c93675615f5d..a54e85b3cf29 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_setup.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_setup.c @@ -21,7 +21,6 @@ #if defined(CONFIG_PMC_MSP7120_GW) #include -#include #define MSP_BOARD_RESET_GPIO 9 #endif @@ -88,11 +87,8 @@ void msp7120_reset(void) * as GPIO char driver may not be enabled and it would look up * data inRAM! */ - set_value_reg32(GPIO_CFG3_REG, - basic_mode_mask(MSP_BOARD_RESET_GPIO), - basic_mode(MSP_GPIO_OUTPUT, MSP_BOARD_RESET_GPIO)); - set_reg32(GPIO_DATA3_REG, - basic_data_mask(MSP_BOARD_RESET_GPIO)); + set_value_reg32(GPIO_CFG3_REG, 0xf000, 0x8000); + set_reg32(GPIO_DATA3_REG, 8); /* * In case GPIO9 doesn't reset the board (jumper configurable!) -- cgit v1.2.2 From ef41f4600f05a4e973c3ac72869c18269567b319 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 28 Apr 2009 14:17:54 +0200 Subject: MIPS: uaccess: Switch lock annotations to might_fault(). Signed-off-by: Ralf Baechle --- arch/mips/include/asm/checksum.h | 4 ++-- arch/mips/include/asm/uaccess.h | 37 +++++++++++++++++++++---------------- 2 files changed, 23 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/checksum.h b/arch/mips/include/asm/checksum.h index 290485ac5407..f2f7c6c264da 100644 --- a/arch/mips/include/asm/checksum.h +++ b/arch/mips/include/asm/checksum.h @@ -40,7 +40,7 @@ static inline __wsum csum_partial_copy_from_user(const void __user *src, void *dst, int len, __wsum sum, int *err_ptr) { - might_sleep(); + might_fault(); return __csum_partial_copy_user((__force void *)src, dst, len, sum, err_ptr); } @@ -53,7 +53,7 @@ static inline __wsum csum_and_copy_to_user(const void *src, void __user *dst, int len, __wsum sum, int *err_ptr) { - might_sleep(); + might_fault(); if (access_ok(VERIFY_WRITE, dst, len)) return __csum_partial_copy_user(src, (__force void *)dst, len, sum, err_ptr); diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h index 5c0876073f13..8de858f5449f 100644 --- a/arch/mips/include/asm/uaccess.h +++ b/arch/mips/include/asm/uaccess.h @@ -245,6 +245,7 @@ do { \ int __gu_err = -EFAULT; \ const __typeof__(*(ptr)) __user * __gu_ptr = (ptr); \ \ + might_fault(); \ if (likely(access_ok(VERIFY_READ, __gu_ptr, size))) \ __get_user_common((x), size, __gu_ptr); \ \ @@ -334,6 +335,7 @@ do { \ __typeof__(*(ptr)) __pu_val = (x); \ int __pu_err = -EFAULT; \ \ + might_fault(); \ if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) { \ switch (size) { \ case 1: __put_user_asm("sb", __pu_addr); break; \ @@ -708,10 +710,10 @@ extern size_t __copy_user(void *__to, const void *__from, size_t __n); const void *__cu_from; \ long __cu_len; \ \ - might_sleep(); \ __cu_to = (to); \ __cu_from = (from); \ __cu_len = (n); \ + might_fault(); \ __cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len); \ __cu_len; \ }) @@ -764,13 +766,14 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); const void *__cu_from; \ long __cu_len; \ \ - might_sleep(); \ __cu_to = (to); \ __cu_from = (from); \ __cu_len = (n); \ - if (access_ok(VERIFY_WRITE, __cu_to, __cu_len)) \ + if (access_ok(VERIFY_WRITE, __cu_to, __cu_len)) { \ + might_fault(); \ __cu_len = __invoke_copy_to_user(__cu_to, __cu_from, \ __cu_len); \ + } \ __cu_len; \ }) @@ -843,10 +846,10 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); const void __user *__cu_from; \ long __cu_len; \ \ - might_sleep(); \ __cu_to = (to); \ __cu_from = (from); \ __cu_len = (n); \ + might_fault(); \ __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ __cu_len); \ __cu_len; \ @@ -874,13 +877,14 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); const void __user *__cu_from; \ long __cu_len; \ \ - might_sleep(); \ __cu_to = (to); \ __cu_from = (from); \ __cu_len = (n); \ - if (access_ok(VERIFY_READ, __cu_from, __cu_len)) \ + if (access_ok(VERIFY_READ, __cu_from, __cu_len)) { \ + might_fault(); \ __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ __cu_len); \ + } \ __cu_len; \ }) @@ -890,10 +894,10 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); const void __user *__cu_from; \ long __cu_len; \ \ - might_sleep(); \ __cu_to = (to); \ __cu_from = (from); \ __cu_len = (n); \ + might_fault(); \ __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ __cu_len); \ __cu_len; \ @@ -905,14 +909,15 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); const void __user *__cu_from; \ long __cu_len; \ \ - might_sleep(); \ __cu_to = (to); \ __cu_from = (from); \ __cu_len = (n); \ if (likely(access_ok(VERIFY_READ, __cu_from, __cu_len) && \ - access_ok(VERIFY_WRITE, __cu_to, __cu_len))) \ + access_ok(VERIFY_WRITE, __cu_to, __cu_len))) { \ + might_fault(); \ __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ __cu_len); \ + } \ __cu_len; \ }) @@ -932,7 +937,7 @@ __clear_user(void __user *addr, __kernel_size_t size) { __kernel_size_t res; - might_sleep(); + might_fault(); __asm__ __volatile__( "move\t$4, %1\n\t" "move\t$5, $0\n\t" @@ -981,7 +986,7 @@ __strncpy_from_user(char *__to, const char __user *__from, long __len) { long res; - might_sleep(); + might_fault(); __asm__ __volatile__( "move\t$4, %1\n\t" "move\t$5, %2\n\t" @@ -1018,7 +1023,7 @@ strncpy_from_user(char *__to, const char __user *__from, long __len) { long res; - might_sleep(); + might_fault(); __asm__ __volatile__( "move\t$4, %1\n\t" "move\t$5, %2\n\t" @@ -1037,7 +1042,7 @@ static inline long __strlen_user(const char __user *s) { long res; - might_sleep(); + might_fault(); __asm__ __volatile__( "move\t$4, %1\n\t" __MODULE_JAL(__strlen_user_nocheck_asm) @@ -1067,7 +1072,7 @@ static inline long strlen_user(const char __user *s) { long res; - might_sleep(); + might_fault(); __asm__ __volatile__( "move\t$4, %1\n\t" __MODULE_JAL(__strlen_user_asm) @@ -1084,7 +1089,7 @@ static inline long __strnlen_user(const char __user *s, long n) { long res; - might_sleep(); + might_fault(); __asm__ __volatile__( "move\t$4, %1\n\t" "move\t$5, %2\n\t" @@ -1115,7 +1120,7 @@ static inline long strnlen_user(const char __user *s, long n) { long res; - might_sleep(); + might_fault(); __asm__ __volatile__( "move\t$4, %1\n\t" "move\t$5, %2\n\t" -- cgit v1.2.2 From 165533c3bd750042e7e140dff5bc2406a5104efe Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 28 Apr 2009 17:31:50 +0200 Subject: MIPS: IP27: Get rid of #ident. Gcc 4.4.0 doesn't like it. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/sn/nmi.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/sn/nmi.h b/arch/mips/include/asm/sn/nmi.h index 6b7b0b5f3729..1af49897d4e1 100644 --- a/arch/mips/include/asm/sn/nmi.h +++ b/arch/mips/include/asm/sn/nmi.h @@ -3,13 +3,13 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * + * Derived from IRIX , Revision 1.5. + * * Copyright (C) 1992 - 1997 Silicon Graphics, Inc. */ #ifndef __ASM_SN_NMI_H #define __ASM_SN_NMI_H -#ident "$Revision: 1.5 $" - #include /* -- cgit v1.2.2 From 05e41404470662a17699af9e6d91fc80ed91e757 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 28 Apr 2009 19:38:35 +0200 Subject: MIPS: Set compiler options only after the compiler prefix has ben set. Otherwise indigestable options might be passed to the host compiler. Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 8d544c7c9fe9..3d5626ee0a5c 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -14,8 +14,6 @@ KBUILD_DEFCONFIG := ip22_defconfig -cflags-y := -ffunction-sections - # # Select the object file format to substitute into the linker script. # @@ -50,6 +48,8 @@ ifneq ($(SUBARCH),$(ARCH)) endif endif +cflags-y := -ffunction-sections + ifdef CONFIG_32BIT ld-emul = $(32bit-emul) vmlinux-32 = vmlinux -- cgit v1.2.2 From 1a4ba061b3c93804027b4cc4c588cfad748d9fc2 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 28 Apr 2009 19:28:33 +0200 Subject: MIPS: Use -mno-check-zero-division I don't think that in 15 years of Linux/MIPS the zero division checking code generated by gcc by default has ever caught anything. Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 3d5626ee0a5c..26947ab85260 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -49,6 +49,7 @@ ifneq ($(SUBARCH),$(ARCH)) endif cflags-y := -ffunction-sections +cflags-y += $(call cc-option, -mno-check-zero-division) ifdef CONFIG_32BIT ld-emul = $(32bit-emul) -- cgit v1.2.2 From 5c5dd1d29120affb127955277bfba9f60e27a3fe Mon Sep 17 00:00:00 2001 From: Shane McDonald Date: Tue, 28 Apr 2009 17:00:27 -0600 Subject: MIPS: MSP71xx: Remove the RAMROOT functions The RAMROOT function was a successful but non-portable attempt to append the root filesystem to the end of the kernel image. The preferred and portable solution is to use an initramfs instead. Signed-off-by: Shane McDonald Signed-off-by: Ralf Baechle --- arch/mips/pmc-sierra/Kconfig | 12 ------- arch/mips/pmc-sierra/msp71xx/msp_prom.c | 60 +-------------------------------- 2 files changed, 1 insertion(+), 71 deletions(-) (limited to 'arch') diff --git a/arch/mips/pmc-sierra/Kconfig b/arch/mips/pmc-sierra/Kconfig index 90261b83db04..c139988bb85d 100644 --- a/arch/mips/pmc-sierra/Kconfig +++ b/arch/mips/pmc-sierra/Kconfig @@ -36,18 +36,6 @@ config PMC_MSP7120_FPGA endchoice -menu "Options for PMC-Sierra MSP chipsets" - depends on PMC_MSP - -config PMC_MSP_EMBEDDED_ROOTFS - bool "Root filesystem embedded in kernel image" - select MTD - select MTD_BLOCK - select MTD_PMC_MSP_RAMROOT - select MTD_RAM - -endmenu - config HYPERTRANSPORT bool "Hypertransport Support for PMC-Sierra Yosemite" depends on PMC_YOSEMITE diff --git a/arch/mips/pmc-sierra/msp71xx/msp_prom.c b/arch/mips/pmc-sierra/msp71xx/msp_prom.c index e5bd5481d8db..c317a3623ce9 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_prom.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_prom.c @@ -40,12 +40,6 @@ #include #include #include -#ifdef CONFIG_CRAMFS -#include -#endif -#ifdef CONFIG_SQUASHFS -#include -#endif #include #include @@ -435,10 +429,6 @@ struct prom_pmemblock *__init prom_getmdesc(void) char *str; unsigned int memsize; unsigned int heaptop; -#ifdef CONFIG_MTD_PMC_MSP_RAMROOT - void *ramroot_start; - unsigned long ramroot_size; -#endif int i; str = prom_getenv(memsz_env); @@ -506,19 +496,7 @@ struct prom_pmemblock *__init prom_getmdesc(void) i++; /* 3 */ mdesc[i].type = BOOT_MEM_RESERVED; mdesc[i].base = CPHYSADDR((u32)_text); -#ifdef CONFIG_MTD_PMC_MSP_RAMROOT - if (get_ramroot(&ramroot_start, &ramroot_size)) { - /* - * Rootfs in RAM -- follows kernel - * Combine rootfs image with kernel block so a - * page (4k) isn't wasted between memory blocks - */ - mdesc[i].size = CPHYSADDR(PAGE_ALIGN( - (u32)ramroot_start + ramroot_size)) - mdesc[i].base; - } else -#endif - mdesc[i].size = CPHYSADDR(PAGE_ALIGN( - (u32)_end)) - mdesc[i].base; + mdesc[i].size = CPHYSADDR(PAGE_ALIGN((u32)_end)) - mdesc[i].base; /* Remainder of RAM -- under memsize */ i++; /* 5 */ @@ -528,39 +506,3 @@ struct prom_pmemblock *__init prom_getmdesc(void) return &mdesc[0]; } - -/* rootfs functions */ -#ifdef CONFIG_MTD_PMC_MSP_RAMROOT -bool get_ramroot(void **start, unsigned long *size) -{ - extern char _end[]; - - /* Check for start following the end of the kernel */ - void *check_start = (void *)_end; - - /* Check for supported rootfs types */ -#ifdef CONFIG_CRAMFS - if (*(__u32 *)check_start == CRAMFS_MAGIC) { - /* Get CRAMFS size */ - *start = check_start; - *size = PAGE_ALIGN(((struct cramfs_super *) - check_start)->size); - - return true; - } -#endif -#ifdef CONFIG_SQUASHFS - if (*((unsigned int *)check_start) == SQUASHFS_MAGIC) { - /* Get SQUASHFS size */ - *start = check_start; - *size = PAGE_ALIGN(((struct squashfs_super_block *) - check_start)->bytes_used); - - return true; - } -#endif - - return false; -} -EXPORT_SYMBOL(get_ramroot); -#endif -- cgit v1.2.2 From 0b54352600b820a6d25f151cbd8975ed9b2aeb09 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 30 Apr 2009 02:16:19 +0200 Subject: MIPS: Fix sign-extension bug in 32-bit kernel on 32-bit hardware. Probably nobody does arithmetic on cp0 register values so this has never bitten. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mipsregs.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 0ef30c81fea6..32ef8bec5c85 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -728,8 +728,8 @@ do { \ ".set\tmips64\n\t" \ "dmfc0\t%M0, " #source "\n\t" \ "dsll\t%L0, %M0, 32\n\t" \ - "dsrl\t%M0, %M0, 32\n\t" \ - "dsrl\t%L0, %L0, 32\n\t" \ + "dsra\t%M0, %M0, 32\n\t" \ + "dsra\t%L0, %L0, 32\n\t" \ ".set\tmips0" \ : "=r" (__val)); \ else \ @@ -737,8 +737,8 @@ do { \ ".set\tmips64\n\t" \ "dmfc0\t%M0, " #source ", " #sel "\n\t" \ "dsll\t%L0, %M0, 32\n\t" \ - "dsrl\t%M0, %M0, 32\n\t" \ - "dsrl\t%L0, %L0, 32\n\t" \ + "dsra\t%M0, %M0, 32\n\t" \ + "dsra\t%L0, %L0, 32\n\t" \ ".set\tmips0" \ : "=r" (__val)); \ local_irq_restore(__flags); \ -- cgit v1.2.2 From bb86bf28aec6d0a207ae09f38a43e94133d4d6db Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 25 Apr 2009 11:25:34 +0200 Subject: MIPS: Fix highmem. Commit 351336929ccf222ae38ff0cb7a8dd5fd5c6236a0 (kernel.org) rsp. b3594a089f1c17ff919f8f78505c3f20e1f6f8ce (linux-mips.org): > From: Chris Dearman > Date: Wed, 19 Sep 2007 00:58:24 +0100 > Subject: [PATCH] [MIPS] Allow setting of the cache attribute at run time. > > Slightly tacky, but there is a precedent in the sparc archirecture code. introduces the variable _page_cachable_default, which defaults to zero and. is used to create the prototype PTE for __kmap_atomic in arch/mips/mm/init.c:kmap_init before initialization in arch/mips/mm/c-r4k.c:coherency_setup, so the default value of 0 will be used as the CCA of kmap atomic pages which on many processors is not a defined CCA value and may result in writes to kmap_atomic pages getting corrupted. Debugged by Jon Fraser (jfraser@broadcom.com). Signed-off-by: Ralf Baechle --- arch/mips/include/asm/fixmap.h | 3 +++ arch/mips/include/asm/highmem.h | 6 ++++-- arch/mips/mm/highmem.c | 25 +++++++++++++++++++------ arch/mips/mm/init.c | 26 -------------------------- 4 files changed, 26 insertions(+), 34 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/fixmap.h b/arch/mips/include/asm/fixmap.h index 9cc8522a394f..0f5caa1307f1 100644 --- a/arch/mips/include/asm/fixmap.h +++ b/arch/mips/include/asm/fixmap.h @@ -108,6 +108,9 @@ static inline unsigned long virt_to_fix(const unsigned long vaddr) return __virt_to_fix(vaddr); } +#define kmap_get_fixmap_pte(vaddr) \ + pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr)) + /* * Called from pgtable_init() */ diff --git a/arch/mips/include/asm/highmem.h b/arch/mips/include/asm/highmem.h index 4374ab2adc75..25adfb02923d 100644 --- a/arch/mips/include/asm/highmem.h +++ b/arch/mips/include/asm/highmem.h @@ -30,8 +30,6 @@ /* declarations for highmem.c */ extern unsigned long highstart_pfn, highend_pfn; -extern pte_t *kmap_pte; -extern pgprot_t kmap_prot; extern pte_t *pkmap_page_table; /* @@ -62,6 +60,10 @@ extern struct page *__kmap_atomic_to_page(void *ptr); #define flush_cache_kmaps() flush_cache_all() +extern void kmap_init(void); + +#define kmap_prot PAGE_KERNEL + #endif /* __KERNEL__ */ #endif /* _ASM_HIGHMEM_H */ diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c index 4481656d1065..2b1309b2580a 100644 --- a/arch/mips/mm/highmem.c +++ b/arch/mips/mm/highmem.c @@ -1,7 +1,12 @@ #include #include +#include #include +static pte_t *kmap_pte; + +unsigned long highstart_pfn, highend_pfn; + void *__kmap(struct page *page) { void *addr; @@ -14,6 +19,7 @@ void *__kmap(struct page *page) return addr; } +EXPORT_SYMBOL(__kmap); void __kunmap(struct page *page) { @@ -22,6 +28,7 @@ void __kunmap(struct page *page) return; kunmap_high(page); } +EXPORT_SYMBOL(__kunmap); /* * kmap_atomic/kunmap_atomic is significantly faster than kmap/kunmap because @@ -48,11 +55,12 @@ void *__kmap_atomic(struct page *page, enum km_type type) #ifdef CONFIG_DEBUG_HIGHMEM BUG_ON(!pte_none(*(kmap_pte - idx))); #endif - set_pte(kmap_pte-idx, mk_pte(page, kmap_prot)); + set_pte(kmap_pte-idx, mk_pte(page, PAGE_KERNEL)); local_flush_tlb_one((unsigned long)vaddr); return (void*) vaddr; } +EXPORT_SYMBOL(__kmap_atomic); void __kunmap_atomic(void *kvaddr, enum km_type type) { @@ -77,6 +85,7 @@ void __kunmap_atomic(void *kvaddr, enum km_type type) pagefault_enable(); } +EXPORT_SYMBOL(__kunmap_atomic); /* * This is the same as kmap_atomic() but can map memory that doesn't @@ -92,7 +101,7 @@ void *kmap_atomic_pfn(unsigned long pfn, enum km_type type) debug_kmap_atomic(type); idx = type + KM_TYPE_NR*smp_processor_id(); vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); - set_pte(kmap_pte-idx, pfn_pte(pfn, kmap_prot)); + set_pte(kmap_pte-idx, pfn_pte(pfn, PAGE_KERNEL)); flush_tlb_one(vaddr); return (void*) vaddr; @@ -111,7 +120,11 @@ struct page *__kmap_atomic_to_page(void *ptr) return pte_page(*pte); } -EXPORT_SYMBOL(__kmap); -EXPORT_SYMBOL(__kunmap); -EXPORT_SYMBOL(__kmap_atomic); -EXPORT_SYMBOL(__kunmap_atomic); +void __init kmap_init(void) +{ + unsigned long kmap_vstart; + + /* cache the first kmap pte */ + kmap_vstart = __fix_to_virt(FIX_KMAP_BEGIN); + kmap_pte = kmap_get_fixmap_pte(kmap_vstart); +} diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index d9348946a19e..c5511294a9ee 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -104,14 +104,6 @@ unsigned long setup_zero_pages(void) return 1UL << order; } -/* - * These are almost like kmap_atomic / kunmap_atmic except they take an - * additional address argument as the hint. - */ - -#define kmap_get_fixmap_pte(vaddr) \ - pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr)) - #ifdef CONFIG_MIPS_MT_SMTC static pte_t *kmap_coherent_pte; static void __init kmap_coherent_init(void) @@ -264,24 +256,6 @@ void copy_from_user_page(struct vm_area_struct *vma, } } -#ifdef CONFIG_HIGHMEM -unsigned long highstart_pfn, highend_pfn; - -pte_t *kmap_pte; -pgprot_t kmap_prot; - -static void __init kmap_init(void) -{ - unsigned long kmap_vstart; - - /* cache the first kmap pte */ - kmap_vstart = __fix_to_virt(FIX_KMAP_BEGIN); - kmap_pte = kmap_get_fixmap_pte(kmap_vstart); - - kmap_prot = PAGE_KERNEL; -} -#endif /* CONFIG_HIGHMEM */ - void __init fixrange_init(unsigned long start, unsigned long end, pgd_t *pgd_base) { -- cgit v1.2.2 From c21004cd5b4cb7d479514d470a62366e8307412c Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 30 Apr 2009 18:14:56 +0200 Subject: MIPS: Rewrite to work with gcc 4.4.0. The inline assembler used on 32-bit kernels was using the "h" constraint which was considered dangerous and removed for gcc 4.4.0. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/div64.h | 142 +++++++++++++++--------------------------- 1 file changed, 50 insertions(+), 92 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/div64.h b/arch/mips/include/asm/div64.h index d1d699105c11..dc5ea5736440 100644 --- a/arch/mips/include/asm/div64.h +++ b/arch/mips/include/asm/div64.h @@ -6,105 +6,63 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ -#ifndef _ASM_DIV64_H -#define _ASM_DIV64_H +#ifndef __ASM_DIV64_H +#define __ASM_DIV64_H -#include +#include -#if (_MIPS_SZLONG == 32) +#if BITS_PER_LONG == 64 -#include +#include /* * No traps on overflows for any of these... */ -#define do_div64_32(res, high, low, base) ({ \ - unsigned long __quot32, __mod32; \ - unsigned long __cf, __tmp, __tmp2, __i; \ - \ - __asm__(".set push\n\t" \ - ".set noat\n\t" \ - ".set noreorder\n\t" \ - "move %2, $0\n\t" \ - "move %3, $0\n\t" \ - "b 1f\n\t" \ - " li %4, 0x21\n" \ - "0:\n\t" \ - "sll $1, %0, 0x1\n\t" \ - "srl %3, %0, 0x1f\n\t" \ - "or %0, $1, %5\n\t" \ - "sll %1, %1, 0x1\n\t" \ - "sll %2, %2, 0x1\n" \ - "1:\n\t" \ - "bnez %3, 2f\n\t" \ - " sltu %5, %0, %z6\n\t" \ - "bnez %5, 3f\n" \ - "2:\n\t" \ - " addiu %4, %4, -1\n\t" \ - "subu %0, %0, %z6\n\t" \ - "addiu %2, %2, 1\n" \ - "3:\n\t" \ - "bnez %4, 0b\n\t" \ - " srl %5, %1, 0x1f\n\t" \ - ".set pop" \ - : "=&r" (__mod32), "=&r" (__tmp), \ - "=&r" (__quot32), "=&r" (__cf), \ - "=&r" (__i), "=&r" (__tmp2) \ - : "Jr" (base), "0" (high), "1" (low)); \ - \ - (res) = __quot32; \ - __mod32; }) - -#define do_div(n, base) ({ \ - unsigned long long __quot; \ - unsigned long __mod; \ - unsigned long long __div; \ - unsigned long __upper, __low, __high, __base; \ - \ - __div = (n); \ - __base = (base); \ - \ - __high = __div >> 32; \ - __low = __div; \ - __upper = __high; \ - \ - if (__high) \ - __asm__("divu $0, %z2, %z3" \ - : "=h" (__upper), "=l" (__high) \ - : "Jr" (__high), "Jr" (__base) \ - : GCC_REG_ACCUM); \ - \ - __mod = do_div64_32(__low, __upper, __low, __base); \ - \ - __quot = __high; \ - __quot = __quot << 32 | __low; \ - (n) = __quot; \ - __mod; }) - -#endif /* (_MIPS_SZLONG == 32) */ - -#if (_MIPS_SZLONG == 64) - -/* - * Hey, we're already 64-bit, no - * need to play games.. - */ -#define do_div(n, base) ({ \ - unsigned long __quot; \ - unsigned int __mod; \ - unsigned long __div; \ - unsigned int __base; \ - \ - __div = (n); \ - __base = (base); \ - \ - __mod = __div % __base; \ - __quot = __div / __base; \ - \ - (n) = __quot; \ - __mod; }) +#define __div64_32(n, base) \ +({ \ + unsigned long __cf, __tmp, __tmp2, __i; \ + unsigned long __quot32, __mod32; \ + unsigned long __high, __low; \ + unsigned long long __n; \ + \ + __high = *__n >> 32; \ + __low = __n; \ + __asm__( \ + " .set push \n" \ + " .set noat \n" \ + " .set noreorder \n" \ + " move %2, $0 \n" \ + " move %3, $0 \n" \ + " b 1f \n" \ + " li %4, 0x21 \n" \ + "0: \n" \ + " sll $1, %0, 0x1 \n" \ + " srl %3, %0, 0x1f \n" \ + " or %0, $1, %5 \n" \ + " sll %1, %1, 0x1 \n" \ + " sll %2, %2, 0x1 \n" \ + "1: \n" \ + " bnez %3, 2f \n" \ + " sltu %5, %0, %z6 \n" \ + " bnez %5, 3f \n" \ + "2: \n" \ + " addiu %4, %4, -1 \n" \ + " subu %0, %0, %z6 \n" \ + " addiu %2, %2, 1 \n" \ + "3: \n" \ + " bnez %4, 0b\n\t" \ + " srl %5, %1, 0x1f\n\t" \ + " .set pop" \ + : "=&r" (__mod32), "=&r" (__tmp), \ + "=&r" (__quot32), "=&r" (__cf), \ + "=&r" (__i), "=&r" (__tmp2) \ + : "Jr" (base), "0" (__high), "1" (__low)); \ + \ + (__n) = __quot32; \ + __mod32; \ +}) -#endif /* (_MIPS_SZLONG == 64) */ +#endif /* BITS_PER_LONG == 64 */ -#endif /* _ASM_DIV64_H */ +#endif /* __ASM_DIV64_H */ -- cgit v1.2.2 From d0ce9a5a47113eec041a0972a0b86134b8fd2828 Mon Sep 17 00:00:00 2001 From: Coly Li Date: Thu, 23 Apr 2009 03:06:06 +0800 Subject: MIPS: Cavium: Add struct clocksource * argument to octeon_cvmcount_read() This patch modifies parameter of octeon_cvmcount_read() from 'void' to 'struct clocksource *cs', which fixes compile warning for incompatible parameter type. Signed-off-by: Coly Li Cc: David Daney Cc: Ingo Molnar Reviewed-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/cavium-octeon/csrc-octeon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/cavium-octeon/csrc-octeon.c b/arch/mips/cavium-octeon/csrc-octeon.c index 70fd92c31657..96110f217dcd 100644 --- a/arch/mips/cavium-octeon/csrc-octeon.c +++ b/arch/mips/cavium-octeon/csrc-octeon.c @@ -38,7 +38,7 @@ void octeon_init_cvmcount(void) local_irq_restore(flags); } -static cycle_t octeon_cvmcount_read(void) +static cycle_t octeon_cvmcount_read(struct clocksource *cs) { return read_c0_cvmcount(); } -- cgit v1.2.2 From a6d5ff04e83b36e0d5c2c50ef4d18e9f38b5abc2 Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 5 May 2009 12:49:47 -0700 Subject: MIPS: Use force_sig when handling address errors. When init is started it is SIGNAL_UNKILLABLE. If it were to get an address error, we would try to send it SIGBUS, but it would be ignored and the faulting instruction restarted. This results in an endless loop. We need to use force_sig() instead so it will actually die and give us some useful information. Reported-by: Florian Fainelli Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/kernel/unaligned.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c index bf4c4a979abb..67bd626942ab 100644 --- a/arch/mips/kernel/unaligned.c +++ b/arch/mips/kernel/unaligned.c @@ -482,19 +482,19 @@ fault: return; die_if_kernel("Unhandled kernel unaligned access", regs); - send_sig(SIGSEGV, current, 1); + force_sig(SIGSEGV, current); return; sigbus: die_if_kernel("Unhandled kernel unaligned access", regs); - send_sig(SIGBUS, current, 1); + force_sig(SIGBUS, current); return; sigill: die_if_kernel("Unhandled kernel unaligned access or invalid instruction", regs); - send_sig(SIGILL, current, 1); + force_sig(SIGILL, current); } asmlinkage void do_ade(struct pt_regs *regs) -- cgit v1.2.2 From 5d81b83d03eb32085c569854695e102dde7af544 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Mon, 4 May 2009 23:51:54 +0200 Subject: MIPS: Sibyte: Fix locking in set_irq_affinity Locking of irq_desc is now done in irq_set_affinity; don't lock it again in chip specific set_affinity function. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/sibyte/bcm1480/irq.c | 7 ++----- arch/mips/sibyte/sb1250/irq.c | 7 ++----- 2 files changed, 4 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c index 352352b3cb2f..c147c4b35d3f 100644 --- a/arch/mips/sibyte/bcm1480/irq.c +++ b/arch/mips/sibyte/bcm1480/irq.c @@ -113,7 +113,6 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask) { int i = 0, old_cpu, cpu, int_on, k; u64 cur_ints; - struct irq_desc *desc = irq_desc + irq; unsigned long flags; unsigned int irq_dirty; @@ -127,8 +126,7 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask) cpu = cpu_logical_map(i); /* Protect against other affinity changers and IMR manipulation */ - spin_lock_irqsave(&desc->lock, flags); - spin_lock(&bcm1480_imr_lock); + spin_lock_irqsave(&bcm1480_imr_lock, flags); /* Swizzle each CPU's IMR (but leave the IP selection alone) */ old_cpu = bcm1480_irq_owner[irq]; @@ -153,8 +151,7 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask) ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING))); } } - spin_unlock(&bcm1480_imr_lock); - spin_unlock_irqrestore(&desc->lock, flags); + spin_unlock_irqrestore(&bcm1480_imr_lock, flags); } #endif diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c index c08ff582da6f..38cb998ade22 100644 --- a/arch/mips/sibyte/sb1250/irq.c +++ b/arch/mips/sibyte/sb1250/irq.c @@ -107,7 +107,6 @@ static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask) { int i = 0, old_cpu, cpu, int_on; u64 cur_ints; - struct irq_desc *desc = irq_desc + irq; unsigned long flags; i = cpumask_first(mask); @@ -121,8 +120,7 @@ static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask) cpu = cpu_logical_map(i); /* Protect against other affinity changers and IMR manipulation */ - spin_lock_irqsave(&desc->lock, flags); - spin_lock(&sb1250_imr_lock); + spin_lock_irqsave(&sb1250_imr_lock, flags); /* Swizzle each CPU's IMR (but leave the IP selection alone) */ old_cpu = sb1250_irq_owner[irq]; @@ -144,8 +142,7 @@ static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask) ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + R_IMR_INTERRUPT_MASK)); } - spin_unlock(&sb1250_imr_lock); - spin_unlock_irqrestore(&desc->lock, flags); + spin_unlock_irqrestore(&sb1250_imr_lock, flags); } #endif -- cgit v1.2.2 From be687518781f5aed86bcc152023b9fcb4d5c6b50 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 14 May 2009 10:23:09 -0600 Subject: powerpc/boot: add simpleImage.* to clean-files list Signed-off-by: Grant Likely --- arch/powerpc/boot/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 4458abb67c51..bff7f127ce1b 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -367,7 +367,7 @@ install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y)) clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \ zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \ zImage.iseries zImage.miboot zImage.pmac zImage.pseries \ - otheros.bld *.dtb + simpleImage.* otheros.bld *.dtb # clean up files cached by wrapper clean-kernel := vmlinux.strip vmlinux.bin -- cgit v1.2.2 From 514a30d95f3277b9abed6044272ea97431bb9658 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 14 May 2009 10:23:10 -0600 Subject: powerpc/virtex: Add uImage to the default images list It is common to use U-Boot on Xilinx Virtex platforms. This patch ensures that CONFIG_DEFAULT_UIMAGE is selected for virtex Signed-off-by: Grant Likely --- arch/powerpc/platforms/40x/Kconfig | 1 + arch/powerpc/platforms/44x/Kconfig | 1 + 2 files changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig index 14e027f5be66..f39c953d5353 100644 --- a/arch/powerpc/platforms/40x/Kconfig +++ b/arch/powerpc/platforms/40x/Kconfig @@ -153,6 +153,7 @@ config 405GPR config XILINX_VIRTEX bool + select DEFAULT_UIMAGE config XILINX_VIRTEX_II_PRO bool diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index bf5c7ff2e6e5..0d83a6a0397d 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -246,6 +246,7 @@ config IBM440EP_ERR42 # Xilinx specific config options. config XILINX_VIRTEX bool + select DEFAULT_UIMAGE # Xilinx Virtex 5 FXT FPGA architecture, selected by a Xilinx board above config XILINX_VIRTEX_5_FXT -- cgit v1.2.2 From ba10eedf5a3fba991563873d4cb65a067aa13f24 Mon Sep 17 00:00:00 2001 From: John Linn Date: Thu, 14 May 2009 10:23:11 -0600 Subject: powerpc/virtex: Fix duplicate level irq events. The interrupt controller was not handling level interrupts correctly such that duplicate interrupts were happening. This fixes the problem and adds edge type interrupts which are needed in Xilinx hardware. Signed-off-by: John Linn Signed-off-by: Grant Likely --- arch/powerpc/sysdev/xilinx_intc.c | 117 ++++++++++++++++++++++++++++++++++---- 1 file changed, 107 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c index a22e1a2df1af..c658b413c9b4 100644 --- a/arch/powerpc/sysdev/xilinx_intc.c +++ b/arch/powerpc/sysdev/xilinx_intc.c @@ -41,8 +41,32 @@ static struct irq_host *master_irqhost; +#define XILINX_INTC_MAXIRQS (32) + +/* The following table allows the interrupt type, edge or level, + * to be cached after being read from the device tree until the interrupt + * is mapped + */ +static int xilinx_intc_typetable[XILINX_INTC_MAXIRQS]; + +/* Map the interrupt type from the device tree to the interrupt types + * used by the interrupt subsystem + */ +static unsigned char xilinx_intc_map_senses[] = { + IRQ_TYPE_EDGE_RISING, + IRQ_TYPE_EDGE_FALLING, + IRQ_TYPE_LEVEL_HIGH, + IRQ_TYPE_LEVEL_LOW, +}; + /* - * IRQ Chip operations + * The interrupt controller is setup such that it doesn't work well with + * the level interrupt handler in the kernel because the handler acks the + * interrupt before calling the application interrupt handler. To deal with + * that, we use 2 different irq chips so that different functions can be + * used for level and edge type interrupts. + * + * IRQ Chip common (across level and edge) operations */ static void xilinx_intc_mask(unsigned int virq) { @@ -52,15 +76,54 @@ static void xilinx_intc_mask(unsigned int virq) out_be32(regs + XINTC_CIE, 1 << irq); } -static void xilinx_intc_unmask(unsigned int virq) +static int xilinx_intc_set_type(unsigned int virq, unsigned int flow_type) +{ + struct irq_desc *desc = get_irq_desc(virq); + + desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL); + desc->status |= flow_type & IRQ_TYPE_SENSE_MASK; + if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) + desc->status |= IRQ_LEVEL; + return 0; +} + +/* + * IRQ Chip level operations + */ +static void xilinx_intc_level_unmask(unsigned int virq) { int irq = virq_to_hw(virq); void * regs = get_irq_chip_data(virq); pr_debug("unmask: %d\n", irq); out_be32(regs + XINTC_SIE, 1 << irq); + + /* ack level irqs because they can't be acked during + * ack function since the handle_level_irq function + * acks the irq before calling the inerrupt handler + */ + out_be32(regs + XINTC_IAR, 1 << irq); } -static void xilinx_intc_ack(unsigned int virq) +static struct irq_chip xilinx_intc_level_irqchip = { + .typename = "Xilinx Level INTC", + .mask = xilinx_intc_mask, + .mask_ack = xilinx_intc_mask, + .unmask = xilinx_intc_level_unmask, + .set_type = xilinx_intc_set_type, +}; + +/* + * IRQ Chip edge operations + */ +static void xilinx_intc_edge_unmask(unsigned int virq) +{ + int irq = virq_to_hw(virq); + void *regs = get_irq_chip_data(virq); + pr_debug("unmask: %d\n", irq); + out_be32(regs + XINTC_SIE, 1 << irq); +} + +static void xilinx_intc_edge_ack(unsigned int virq) { int irq = virq_to_hw(virq); void * regs = get_irq_chip_data(virq); @@ -68,27 +131,60 @@ static void xilinx_intc_ack(unsigned int virq) out_be32(regs + XINTC_IAR, 1 << irq); } -static struct irq_chip xilinx_intc_irqchip = { - .typename = "Xilinx INTC", +static struct irq_chip xilinx_intc_edge_irqchip = { + .typename = "Xilinx Edge INTC", .mask = xilinx_intc_mask, - .unmask = xilinx_intc_unmask, - .ack = xilinx_intc_ack, + .unmask = xilinx_intc_edge_unmask, + .ack = xilinx_intc_edge_ack, + .set_type = xilinx_intc_set_type, }; /* * IRQ Host operations */ + +/** + * xilinx_intc_xlate - translate virq# from device tree interrupts property + */ +static int xilinx_intc_xlate(struct irq_host *h, struct device_node *ct, + u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, + unsigned int *out_flags) +{ + if ((intsize < 2) || (intspec[0] >= XILINX_INTC_MAXIRQS)) + return -EINVAL; + + /* keep a copy of the interrupt type til the interrupt is mapped + */ + xilinx_intc_typetable[intspec[0]] = xilinx_intc_map_senses[intspec[1]]; + + /* Xilinx uses 2 interrupt entries, the 1st being the h/w + * interrupt number, the 2nd being the interrupt type, edge or level + */ + *out_hwirq = intspec[0]; + *out_flags = xilinx_intc_map_senses[intspec[1]]; + + return 0; +} static int xilinx_intc_map(struct irq_host *h, unsigned int virq, irq_hw_number_t irq) { set_irq_chip_data(virq, h->host_data); - set_irq_chip_and_handler(virq, &xilinx_intc_irqchip, handle_level_irq); - set_irq_type(virq, IRQ_TYPE_NONE); + + if (xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_HIGH || + xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_LOW) { + set_irq_chip_and_handler(virq, &xilinx_intc_level_irqchip, + handle_level_irq); + } else { + set_irq_chip_and_handler(virq, &xilinx_intc_edge_irqchip, + handle_edge_irq); + } return 0; } static struct irq_host_ops xilinx_intc_ops = { .map = xilinx_intc_map, + .xlate = xilinx_intc_xlate, }; struct irq_host * __init @@ -116,7 +212,8 @@ xilinx_intc_init(struct device_node *np) out_be32(regs + XINTC_MER, 0x3UL); /* Turn on the Master Enable. */ /* Allocate and initialize an irq_host structure. */ - irq = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, 32, &xilinx_intc_ops, -1); + irq = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, XILINX_INTC_MAXIRQS, + &xilinx_intc_ops, -1); if (!irq) panic(__FILE__ ": Cannot allocate IRQ host\n"); irq->host_data = regs; -- cgit v1.2.2 From 93f1cc609c702a83e44da51cabdd353b20c24f79 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Thu, 30 Apr 2009 18:16:44 +0000 Subject: powerpc: Fix mktree build error on Mac OS X host The mktree utility defines some variables as "uint", although this is not a standard C type, and so cross-compiling on Mac OS X fails. Change this to "unsigned int". Signed-off-by: Timur Tabi Acked-by: Josh Boyer Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/boot/mktree.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/mktree.c b/arch/powerpc/boot/mktree.c index 45d06a8c7cd1..c2baae0a3d89 100644 --- a/arch/powerpc/boot/mktree.c +++ b/arch/powerpc/boot/mktree.c @@ -42,7 +42,7 @@ int main(int argc, char *argv[]) { int in_fd, out_fd; int nblks, i; - uint cksum, *cp; + unsigned int cksum, *cp; struct stat st; boot_block_t bt; @@ -90,7 +90,7 @@ int main(int argc, char *argv[]) cksum = 0; cp = (void *)&bt; - for (i=0; i Date: Wed, 6 May 2009 14:07:52 +0000 Subject: powerpc/iseries: Fix pci breakage due to bad dma_data initialization Commit 4fc665b88a79a45bae8bbf3a05563c27c7337c3d "powerpc: Merge 32 and 64-bit dma code" made changes to the PCI initialisation code that added an assignment to archdata.dma_data but only for 32 bit code. Commit 7eef440a545c7f812ed10b49d4a10a351df9cad6 "powerpc/pci: Cosmetic cleanups of pci-common.c" removed the conditional compilation. Unfortunately, the iSeries code setup the archdata.dma_data before that assignment was done - effectively overwriting the dma_data with NULL. Fix this up by moving the iSeries setup of dma_data into a pci_dma_dev_setup callback. Signed-off-by: Stephen Rothwell Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/iseries/iommu.h | 4 ---- arch/powerpc/platforms/iseries/iommu.c | 6 +++++- arch/powerpc/platforms/iseries/pci.c | 1 - 3 files changed, 5 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/iseries/iommu.h b/arch/powerpc/include/asm/iseries/iommu.h index c59ee7e4bed1..1b9692c60899 100644 --- a/arch/powerpc/include/asm/iseries/iommu.h +++ b/arch/powerpc/include/asm/iseries/iommu.h @@ -26,10 +26,6 @@ struct vio_dev; struct device_node; struct iommu_table; -/* Creates table for an individual device node */ -extern void iommu_devnode_init_iSeries(struct pci_dev *pdev, - struct device_node *dn); - /* Get table parameters from HV */ extern void iommu_table_getparms_iSeries(unsigned long busno, unsigned char slotno, unsigned char virtbus, diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c index ff43f1fd8343..40219823d9b0 100644 --- a/arch/powerpc/platforms/iseries/iommu.c +++ b/arch/powerpc/platforms/iseries/iommu.c @@ -174,9 +174,10 @@ static struct iommu_table *iommu_table_find(struct iommu_table * tbl) } -void iommu_devnode_init_iSeries(struct pci_dev *pdev, struct device_node *dn) +static void pci_dma_dev_setup_iseries(struct pci_dev *pdev) { struct iommu_table *tbl; + struct device_node *dn = pdev->sysdata; struct pci_dn *pdn = PCI_DN(dn); const u32 *lsn = of_get_property(dn, "linux,logical-slot-number", NULL); @@ -194,6 +195,8 @@ void iommu_devnode_init_iSeries(struct pci_dev *pdev, struct device_node *dn) kfree(tbl); pdev->dev.archdata.dma_data = pdn->iommu_table; } +#else +#define pci_dma_dev_setup_iseries NULL #endif static struct iommu_table veth_iommu_table; @@ -251,5 +254,6 @@ void iommu_init_early_iSeries(void) ppc_md.tce_build = tce_build_iSeries; ppc_md.tce_free = tce_free_iSeries; + ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_iseries; set_pci_dma_ops(&dma_iommu_ops); } diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c index 02a634faedbe..21cddc30220b 100644 --- a/arch/powerpc/platforms/iseries/pci.c +++ b/arch/powerpc/platforms/iseries/pci.c @@ -444,7 +444,6 @@ void __init iSeries_pcibios_fixup_resources(struct pci_dev *pdev) pdev->sysdata = node; allocate_device_bars(pdev); iseries_device_information(pdev, bus, *sub_bus); - iommu_devnode_init_iSeries(pdev, node); } /* -- cgit v1.2.2 From e5fc948b11a9d0aee1cabe7c82726bc36d496875 Mon Sep 17 00:00:00 2001 From: Maynard Johnson Date: Thu, 7 May 2009 05:48:32 +0000 Subject: powerpc: Fix oprofile sampling of marked events on POWER7 Description ----------- Change ppc64 oprofile kernel driver to use the SLOT bits (MMCRA[37:39]only on older processors where those bits are defined. Background ---------- The performance monitor unit of the 64-bit POWER processor family has the ability to collect accurate instruction-level samples when profiling on marked events (i.e., "PM_MRK_"). In processors prior to POWER6, the MMCRA register contained "slot information" that the oprofile kernel driver used to adjust the value latched in the SIAR at the time of a PMU interrupt. But as of POWER6, these slot bits in MMCRA are no longer necessary for oprofile to use, since the SIAR itself holds the accurate sampled instruction address. With POWER6, these MMCRA slot bits were zero'ed out by hardware so oprofile's use of these slot bits was, in effect, a NOP. But with POWER7, these bits are no longer zero'ed out; however, they serve some other purpose rather than slot information. Thus, using these bits on POWER7 to adjust the SIAR value results in samples being attributed to the wrong instructions. The attached patch changes the oprofile kernel driver to ignore these slot bits on all newer processors starting with POWER6. Signed-off-by: Maynard Johnson Signed-off-by: Michael Wolf Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/oprofile/op_model_power4.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c index 3e3d91f536e0..80774092db77 100644 --- a/arch/powerpc/oprofile/op_model_power4.c +++ b/arch/powerpc/oprofile/op_model_power4.c @@ -26,6 +26,7 @@ static unsigned long reset_value[OP_MAX_COUNTER]; static int oprofile_running; +static int use_slot_nums; /* mmcr values are set in power4_reg_setup, used in power4_cpu_setup */ static u32 mmcr0_val; @@ -61,6 +62,12 @@ static int power4_reg_setup(struct op_counter_config *ctr, else mmcr0_val |= MMCR0_PROBLEM_DISABLE; + if (__is_processor(PV_POWER4) || __is_processor(PV_POWER4p) || + __is_processor(PV_970) || __is_processor(PV_970FX) || + __is_processor(PV_970MP) || __is_processor(PV_970GX) || + __is_processor(PV_POWER5) || __is_processor(PV_POWER5p)) + use_slot_nums = 1; + return 0; } @@ -206,7 +213,7 @@ static unsigned long get_pc(struct pt_regs *regs) mmcra = mfspr(SPRN_MMCRA); - if (mmcra & MMCRA_SAMPLE_ENABLE) { + if (use_slot_nums && (mmcra & MMCRA_SAMPLE_ENABLE)) { slot = ((mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT); if (slot > 1) pc += 4 * (slot - 1); -- cgit v1.2.2 From 31207dab7d2e63795eb15823947bd2f7025b08e2 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 8 May 2009 12:08:20 +0000 Subject: powerpc/mpic: Fix incorrect allocation of interrupt rev-map Before when we were setting up the irq host map for mpic we passed in just isu_size for the size of the linear map. However, for a number of mpic implementations we have no isu (thus pass in 0) and will end up with a no linear map (size = 0). This causes us to always call irq_find_mapping() from mpic_get_irq(). By moving the allocation of the host map to after we've determined the number of sources we can actually benefit from having a linear map for the non-isu users that covers all the interrupt sources. Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/sysdev/mpic.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 21b956701596..0efc12d1a3d7 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -1057,13 +1057,6 @@ struct mpic * __init mpic_alloc(struct device_node *node, memset(mpic, 0, sizeof(struct mpic)); mpic->name = name; - mpic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR, - isu_size, &mpic_host_ops, - flags & MPIC_LARGE_VECTORS ? 2048 : 256); - if (mpic->irqhost == NULL) - return NULL; - - mpic->irqhost->host_data = mpic; mpic->hc_irq = mpic_irq_chip; mpic->hc_irq.typename = name; if (flags & MPIC_PRIMARY) @@ -1213,6 +1206,15 @@ struct mpic * __init mpic_alloc(struct device_node *node, mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1); mpic->isu_mask = (1 << mpic->isu_shift) - 1; + mpic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR, + isu_size ? isu_size : mpic->num_sources, + &mpic_host_ops, + flags & MPIC_LARGE_VECTORS ? 2048 : 256); + if (mpic->irqhost == NULL) + return NULL; + + mpic->irqhost->host_data = mpic; + /* Display version */ switch (greg_feature & MPIC_GREG_FEATURE_VERSION_MASK) { case 1: -- cgit v1.2.2 From 49a849652513235a244dfbf5e58c54f796bd1148 Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Fri, 8 May 2009 12:19:27 +0000 Subject: powerpc: Allow mem=x cmdline to work with 4G+ We're currently choking on mem=4g (and above) due to memory_limit being specified as an unsigned long. Make memory_limit phys_addr_t to fix this. Signed-off-by: Becky Bruce Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/system.h | 2 +- arch/powerpc/kernel/machine_kexec.c | 4 ++-- arch/powerpc/kernel/prom.c | 8 ++++---- arch/powerpc/mm/mem.c | 2 +- 4 files changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h index f612798e1c93..2b2420a49884 100644 --- a/arch/powerpc/include/asm/system.h +++ b/arch/powerpc/include/asm/system.h @@ -212,7 +212,7 @@ extern struct task_struct *_switch(struct thread_struct *prev, extern unsigned int rtas_data; extern int mem_init_done; /* set on boot once kmalloc can be called */ extern int init_bootmem_done; /* set on !NUMA once bootmem is available */ -extern unsigned long memory_limit; +extern phys_addr_t memory_limit; extern unsigned long klimit; extern void *alloc_maybe_bootmem(size_t size, gfp_t mask); diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index d59e2b1bdcba..bb3d893a8353 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -125,8 +125,8 @@ void __init reserve_crashkernel(void) /* Crash kernel trumps memory limit */ if (memory_limit && memory_limit <= crashk_res.end) { memory_limit = crashk_res.end + 1; - printk("Adjusted memory limit for crashkernel, now 0x%lx\n", - memory_limit); + printk("Adjusted memory limit for crashkernel, now 0x%llx\n", + (unsigned long long)memory_limit); } printk(KERN_INFO "Reserving %ldMB of memory at %ldMB " diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 5ec6a9e23933..ce01ff2474da 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -426,7 +426,7 @@ static int __init early_parse_mem(char *p) return 1; memory_limit = PAGE_ALIGN(memparse(p, &p)); - DBG("memory limit = 0x%lx\n", memory_limit); + DBG("memory limit = 0x%llx\n", (unsigned long long)memory_limit); return 0; } @@ -1160,7 +1160,7 @@ static inline void __init phyp_dump_reserve_mem(void) {} void __init early_init_devtree(void *params) { - unsigned long limit; + phys_addr_t limit; DBG(" -> early_init_devtree(%p)\n", params); @@ -1204,7 +1204,7 @@ void __init early_init_devtree(void *params) limit = memory_limit; if (! limit) { - unsigned long memsize; + phys_addr_t memsize; /* Ensure that total memory size is page-aligned, because * otherwise mark_bootmem() gets upset. */ @@ -1218,7 +1218,7 @@ void __init early_init_devtree(void *params) lmb_analyze(); lmb_dump_all(); - DBG("Phys. mem: %lx\n", lmb_phys_mem_size()); + DBG("Phys. mem: %llx\n", lmb_phys_mem_size()); /* We may need to relocate the flat tree, do it now. * FIXME .. and the initrd too? */ diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index f668fa9ba804..d0602a76bf7f 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -57,7 +57,7 @@ int init_bootmem_done; int mem_init_done; -unsigned long memory_limit; +phys_addr_t memory_limit; #ifdef CONFIG_HIGHMEM pte_t *kmap_pte; -- cgit v1.2.2 From 37cd8ed90fc5b11941110d2d0cea6807f86d4787 Mon Sep 17 00:00:00 2001 From: Gerhard Stenzel Date: Wed, 13 May 2009 05:50:46 +0000 Subject: powerpc/cell: Make ptcal more reliable There have been a series of checkstops on QS21 related to ptcal being set up incorrectly. On systems that only have memory on a single node, ptcal fails when it gets a pointer to memory on the remote node. Moreover, agressive prefetching in memcpy and other functions may accidentally touch the first cache line of the page that we reserve for ptcal, which causes an ECC checkstop. We now allocate pages only from the specified node, moves the ptcal area into the middle of the allocated page to avoid potential prefetch problems and prints the address of the ptcal area to facilitate diagnostics. Signed-off-by: Gerhard Stenzel Signed-off-by: Arnd Bergmann Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/cell/ras.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c index 5f961c464cc4..296b5268754e 100644 --- a/arch/powerpc/platforms/cell/ras.c +++ b/arch/powerpc/platforms/cell/ras.c @@ -122,12 +122,23 @@ static int __init cbe_ptcal_enable_on_node(int nid, int order) area->nid = nid; area->order = order; - area->pages = alloc_pages_node(area->nid, GFP_KERNEL, area->order); + area->pages = alloc_pages_node(area->nid, GFP_KERNEL | GFP_THISNODE, + area->order); - if (!area->pages) + if (!area->pages) { + printk(KERN_WARNING "%s: no page on node %d\n", + __func__, area->nid); goto out_free_area; + } - addr = __pa(page_address(area->pages)); + /* + * We move the ptcal area to the middle of the allocated + * page, in order to avoid prefetches in memcpy and similar + * functions stepping on it. + */ + addr = __pa(page_address(area->pages)) + (PAGE_SIZE >> 1); + printk(KERN_DEBUG "%s: enabling PTCAL on node %d address=0x%016lx\n", + __func__, area->nid, addr); ret = -EIO; if (rtas_call(ptcal_start_tok, 3, 1, NULL, area->nid, -- cgit v1.2.2 From b173f03d7c48d3346541f26e0b29690dbadca279 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 14 May 2009 18:34:06 +0000 Subject: powerpc/pseries: Really fix the oprofile CPU type on pseries My previous pach for fixing the oprofile CPU type got somewhat mismerged (by my fault) when it collided with another related patch. This should finally (fingers crossed) fix the whole thing. We make sure we keep the -old- oprofile type and CPU type whenever one of them was specified in the first pass through the function. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/cputable.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index f9c40f869c6e..3e33fb933d99 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -1836,7 +1836,7 @@ static void __init setup_cpu_spec(unsigned long offset, struct cpu_spec *s) * and, in that case, keep the current value for * oprofile_cpu_type. */ - if (old.oprofile_cpu_type == NULL) { + if (old.oprofile_cpu_type != NULL) { t->oprofile_cpu_type = old.oprofile_cpu_type; t->oprofile_type = old.oprofile_type; } -- cgit v1.2.2 From ad892a63f64888a7b05eb2046febbcfbdd54dfcc Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 14 May 2009 20:16:47 +0000 Subject: powerpc: Fix PCI ROM access A couple of issues crept in since about 2.6.27 related to accessing PCI device ROMs on various powerpc machines. First, historically, we don't allocate the ROM resource in the resource tree. I'm not entirely certain of why, I susepct they often contained garbage on x86 but it's hard to tell. This causes the current generic code to always call pci_assign_resource() when trying to access the said ROM from sysfs, which will try to re-assign some new address regardless of what the ROM BAR was already set to at boot time. This can be a problem on hypervisor platforms like pSeries where we aren't supposed to move PCI devices around (and in fact probably can't). Second, our code that generates the PCI tree from the OF device-tree (instead of doing config space probing) which we mostly use on pseries at the moment, didn't set the (new) flag IORESOURCE_SIZEALIGN on any resource. That means that any attempt at re-assigning such a resource with pci_assign_resource() would fail due to resource_alignment() returning 0. This fixes this by doing these two things: - The code that calculates resource flags based on the OF device-node is improved to set IORESOURCE_SIZEALIGN on any valid BAR, and while at it also set IORESOURCE_READONLY for ROMs since we were lacking that too - We now allocate ROM resources as part of the resource tree. However to limit the chances of nasty conflicts due to busted firmwares, we only do it on the second pass of our two-passes allocation scheme, so that all valid and enabled BARs get precedence. This brings pSeries back the ability to access PCI ROMs via sysfs (and thus initialize various video cards from X etc...). Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/pci-common.c | 21 ++++++++++++++------- arch/powerpc/kernel/pci_64.c | 15 ++++++++++++--- 2 files changed, 26 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 9c69e7e145c5..4fee63cb53ff 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1366,12 +1366,17 @@ static void __init pcibios_allocate_resources(int pass) for_each_pci_dev(dev) { pci_read_config_word(dev, PCI_COMMAND, &command); - for (idx = 0; idx < 6; idx++) { + for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) { r = &dev->resource[idx]; if (r->parent) /* Already allocated */ continue; if (!r->flags || (r->flags & IORESOURCE_UNSET)) continue; /* Not assigned at all */ + /* We only allocate ROMs on pass 1 just in case they + * have been screwed up by firmware + */ + if (idx == PCI_ROM_RESOURCE ) + disabled = 1; if (r->flags & IORESOURCE_IO) disabled = !(command & PCI_COMMAND_IO); else @@ -1382,17 +1387,19 @@ static void __init pcibios_allocate_resources(int pass) if (pass) continue; r = &dev->resource[PCI_ROM_RESOURCE]; - if (r->flags & IORESOURCE_ROM_ENABLE) { + if (r->flags) { /* Turn the ROM off, leave the resource region, * but keep it unregistered. */ u32 reg; - pr_debug("PCI: Switching off ROM of %s\n", - pci_name(dev)); - r->flags &= ~IORESOURCE_ROM_ENABLE; pci_read_config_dword(dev, dev->rom_base_reg, ®); - pci_write_config_dword(dev, dev->rom_base_reg, - reg & ~PCI_ROM_ADDRESS_ENABLE); + if (reg & PCI_ROM_ADDRESS_ENABLE) { + pr_debug("PCI: Switching off ROM of %s\n", + pci_name(dev)); + r->flags &= ~IORESOURCE_ROM_ENABLE; + pci_write_config_dword(dev, dev->rom_base_reg, + reg & ~PCI_ROM_ADDRESS_ENABLE); + } } } } diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index be574fc0d92f..96edb6f8babb 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -64,7 +64,7 @@ static u32 get_int_prop(struct device_node *np, const char *name, u32 def) return def; } -static unsigned int pci_parse_of_flags(u32 addr0) +static unsigned int pci_parse_of_flags(u32 addr0, int bridge) { unsigned int flags = 0; @@ -75,8 +75,17 @@ static unsigned int pci_parse_of_flags(u32 addr0) if (addr0 & 0x40000000) flags |= IORESOURCE_PREFETCH | PCI_BASE_ADDRESS_MEM_PREFETCH; + /* Note: We don't know whether the ROM has been left enabled + * by the firmware or not. We mark it as disabled (ie, we do + * not set the IORESOURCE_ROM_ENABLE flag) for now rather than + * do a config space read, it will be force-enabled if needed + */ + if (!bridge && (addr0 & 0xff) == 0x30) + flags |= IORESOURCE_READONLY; } else if (addr0 & 0x01000000) flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO; + if (flags) + flags |= IORESOURCE_SIZEALIGN; return flags; } @@ -95,7 +104,7 @@ static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev) return; pr_debug(" parse addresses (%d bytes) @ %p\n", proplen, addrs); for (; proplen >= 20; proplen -= 20, addrs += 5) { - flags = pci_parse_of_flags(addrs[0]); + flags = pci_parse_of_flags(addrs[0], 0); if (!flags) continue; base = of_read_number(&addrs[1], 2); @@ -293,7 +302,7 @@ void __devinit of_scan_pci_bridge(struct device_node *node, } i = 1; for (; len >= 32; len -= 32, ranges += 8) { - flags = pci_parse_of_flags(ranges[0]); + flags = pci_parse_of_flags(ranges[0], 1); size = of_read_number(&ranges[6], 2); if (flags == 0 || size == 0) continue; -- cgit v1.2.2 From f492ec9f02908579353e31949855f86909a5af14 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 14 May 2009 13:01:59 -0700 Subject: ASoC: DaVinci EVM board support buildfixes This is a build fix, resyncing the DaVinci EVM ASoC board code with the version in the DaVinci tree. That resync includes support for the DM355 EVM, although that board isn't yet in mainline. (NOTE: also includes a bugfix to the platform_add_resources call, recently sent by Chaithrika U S but not yet merged into the DaVinci tree.) Signed-off-by: David Brownell Signed-off-by: Mark Brown --- arch/arm/mach-davinci/include/mach/asp.h | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 arch/arm/mach-davinci/include/mach/asp.h (limited to 'arch') diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h new file mode 100644 index 000000000000..e0abc437d796 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/asp.h @@ -0,0 +1,25 @@ +/* + * - DaVinci Audio Serial Port support + */ +#ifndef __ASM_ARCH_DAVINCI_ASP_H +#define __ASM_ARCH_DAVINCI_ASP_H + +#include + +/* Bases of register banks */ +#define DAVINCI_ASP0_BASE 0x01E02000 +#define DAVINCI_ASP1_BASE 0x01E04000 + +/* EDMA channels */ +#define DAVINCI_DMA_ASP0_TX 2 +#define DAVINCI_DMA_ASP0_RX 3 +#define DAVINCI_DMA_ASP1_TX 8 +#define DAVINCI_DMA_ASP1_RX 9 + +/* Interrupts */ +#define DAVINCI_ASP0_RX_INT IRQ_MBRINT +#define DAVINCI_ASP0_TX_INT IRQ_MBXINT +#define DAVINCI_ASP1_RX_INT IRQ_MBRINT +#define DAVINCI_ASP1_TX_INT IRQ_MBXINT + +#endif /* __ASM_ARCH_DAVINCI_ASP_H */ -- cgit v1.2.2 From ceec1c33c36e4783cba41416f327f4bbc05218c3 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 17 Apr 2009 12:29:22 +0100 Subject: [ARM] nwfpe: Add decleration for ExtendedCPDO Add header file decleration for 'ExtendedCPDO' in fpa11.h to stop the following sparse warning: extended_cpdo.c:90:14: warning: symbol 'ExtendedCPDO' was not declared. Should it be static? Signed-off-by: Ben Dooks --- arch/arm/nwfpe/fpa11.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/nwfpe/fpa11.h b/arch/arm/nwfpe/fpa11.h index 386cbd13eaf4..d3a6f9298e9e 100644 --- a/arch/arm/nwfpe/fpa11.h +++ b/arch/arm/nwfpe/fpa11.h @@ -114,4 +114,8 @@ extern unsigned int SingleCPDO(struct roundingData *roundData, extern unsigned int DoubleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd); +/* extneded_cpdo.c */ +extern unsigned int ExtendedCPDO(struct roundingData *roundData, + const unsigned int opcode, FPREG * rFd); + #endif -- cgit v1.2.2 From 3ea385f061d08a9509a884e347ad1007bb6c3c66 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 17 Apr 2009 12:21:56 +0100 Subject: [ARM] nwfpe: fix 'floatx80_is_nan' sparse warning The symbol 'floatx80_is_nan' prototype was defined locally in fpa11_cprt.c when it was built outside the file in softfloat-specialisze. Move this into softfloat.h to fix the following sparse warning: softfloat-specialize:276:6: warning: symbol 'floatx80_is_nan' was not declared. Should it be static? Signed-off-by: Ben Dooks --- arch/arm/nwfpe/fpa11_cprt.c | 4 ---- arch/arm/nwfpe/softfloat.h | 2 ++ 2 files changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/nwfpe/fpa11_cprt.c b/arch/arm/nwfpe/fpa11_cprt.c index 9843dc533047..31c4eeec18b0 100644 --- a/arch/arm/nwfpe/fpa11_cprt.c +++ b/arch/arm/nwfpe/fpa11_cprt.c @@ -27,10 +27,6 @@ #include "fpmodule.inl" #include "softfloat.h" -#ifdef CONFIG_FPE_NWFPE_XP -extern flag floatx80_is_nan(floatx80); -#endif - unsigned int PerformFLT(const unsigned int opcode); unsigned int PerformFIX(const unsigned int opcode); diff --git a/arch/arm/nwfpe/softfloat.h b/arch/arm/nwfpe/softfloat.h index 260fe29d73f5..13e479c5da57 100644 --- a/arch/arm/nwfpe/softfloat.h +++ b/arch/arm/nwfpe/softfloat.h @@ -226,6 +226,8 @@ char floatx80_le_quiet( floatx80, floatx80 ); char floatx80_lt_quiet( floatx80, floatx80 ); char floatx80_is_signaling_nan( floatx80 ); +extern flag floatx80_is_nan(floatx80); + #endif static inline flag extractFloat32Sign(float32 a) -- cgit v1.2.2 From 33ab1979bc9f719213bc3f392c8fd9d012e4f4e9 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Wed, 11 Feb 2009 18:46:32 -0600 Subject: kgdb,i386: use address that SP register points to in the exception frame The treatment of the SP register is different on x86_64 and i386. This is a regression fix that lived outside the mainline kernel from 2.6.27 to now. The regression was a result of the original merge consolidation of the i386 and x86_64 archs to x86. The incorrectly reported SP on i386 prevented stack tracebacks from working correctly in gdb. Signed-off-by: Jason Wessel --- arch/x86/kernel/kgdb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c index eedfaebe1063..b1f4dffb919e 100644 --- a/arch/x86/kernel/kgdb.c +++ b/arch/x86/kernel/kgdb.c @@ -88,6 +88,7 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) gdb_regs[GDB_SS] = __KERNEL_DS; gdb_regs[GDB_FS] = 0xFFFF; gdb_regs[GDB_GS] = 0xFFFF; + gdb_regs[GDB_SP] = (int)®s->sp; #else gdb_regs[GDB_R8] = regs->r8; gdb_regs[GDB_R9] = regs->r9; @@ -100,8 +101,8 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) gdb_regs32[GDB_PS] = regs->flags; gdb_regs32[GDB_CS] = regs->cs; gdb_regs32[GDB_SS] = regs->ss; -#endif gdb_regs[GDB_SP] = regs->sp; +#endif } /** -- cgit v1.2.2 From f36dd6e7c0c04a056d3441185a17e5d4e3723192 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 7 May 2009 15:07:47 +0200 Subject: [ARM] S3C64XX: GPIO include cleanup Cleanup arm/plat-s3c64xx/include/plat/gpio-bank-h.h include file. Using shift-left operation with value >32 is a bad habit. Reviewed-by: Kyungmin Park Signed-off-by: Marek Szyprowski Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h index 81549516572f..2ba1767512d7 100644 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h +++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h @@ -61,14 +61,14 @@ #define S3C64XX_GPH7_ADDR_CF1 (0x06 << 28) #define S3C64XX_GPH7_EINT_G6_7 (0x07 << 28) -#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 32) -#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 32) -#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 32) -#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 32) -#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 32) - -#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 36) -#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 36) -#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 36) -#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 36) +#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 0) +#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 0) +#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 0) +#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 0) +#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 0) +#define S3C64XX_GPH9_OUTPUT (0x01 << 4) +#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 4) +#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 4) +#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 4) +#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 4) -- cgit v1.2.2 From beb9f4ed22ee618ffcf5064ff7d5ca4cfc83104b Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 7 May 2009 15:07:41 +0200 Subject: [ARM] S3C64XX: fix GPIO debug Fix compilation bug when debug was enabled Reviewed-by: Kyungmin Park Signed-off-by: Marek Szyprowski Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/gpiolib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c index ee9188add8fb..78ee52cffc9e 100644 --- a/arch/arm/plat-s3c64xx/gpiolib.c +++ b/arch/arm/plat-s3c64xx/gpiolib.c @@ -57,7 +57,7 @@ #if 1 #define gpio_dbg(x...) do { } while(0) #else -#define gpio_dbg(x...) printk(KERN_DEBUG ## x) +#define gpio_dbg(x...) printk(KERN_DEBUG x) #endif /* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where -- cgit v1.2.2 From 871fcd7cf791b853ae044f813db94caefbf66725 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 15 May 2009 14:20:53 +0100 Subject: [ARM] S3C24XX: Fix unused code warning in arch/arm/plat-s3c24xx/dma.c Fix unused code warning in arch/arm/plat-s3c24xx/dma.c if there is no PM support enabled. The function to_dma_chan() should be marked inline so that the compiler will eliminate it without warning if it isn't used. arch/arm/plat-s3c24xx/dma.c:1239: warning: 'to_dma_chan' defined but not used Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index aee2aeb46c60..07326f632361 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -1235,7 +1235,7 @@ int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *d EXPORT_SYMBOL(s3c2410_dma_getposition); -static struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev) +static inline struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev) { return container_of(dev, struct s3c2410_dma_chan, dev); } -- cgit v1.2.2 From a8af6de00fafed316fea8f39d87c7e8e19ec1ea0 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 15 May 2009 14:57:09 +0100 Subject: [ARM] S3C2410: mach-bast.c registering i2c data too early The BAST support code is calling s3c_i2c0_set_platdata() from the map_io() entry, instead of the bast_init() code. This causes the registration to fail due to kmalloc() not being available at the time. This fixes the following error: s3c_i2c0_set_platdata: no memory for platform data Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/mach-bast.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 4389c160f7d0..8637dea5e150 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -588,8 +588,6 @@ static void __init bast_map_io(void) s3c_device_nand.dev.platform_data = &bast_nand_info; - s3c_i2c0_set_platdata(&bast_i2c_info); - s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs)); @@ -602,6 +600,7 @@ static void __init bast_init(void) sysdev_class_register(&bast_pm_sysclass); sysdev_register(&bast_pm_sysdev); + s3c_i2c0_set_platdata(&bast_i2c_info); s3c24xx_fb_set_platdata(&bast_fb_info); platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices)); -- cgit v1.2.2 From 3ac19bb443255579b30f05af5e688b6c73b1bb91 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 15 May 2009 15:21:57 +0100 Subject: [ARM] S3C: Do not set clk->owner field if unset The s3c24xx_register_clock() function has been doing a test on clk->owner to see if it is NULL, and then setting itself as the owner if clk->owner == NULL. This is not needed, arch/arm/plat-s3c/clock.c cannot be compiled as a module, and even if it was, it should not be playing with this field if it being registered from somewhere else. The best course of action is to remove this bit of code completely. Signed-off-by: Ben Dooks --- arch/arm/plat-s3c/clock.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c/clock.c b/arch/arm/plat-s3c/clock.c index b6be76e2fe51..4d01ef1a25dd 100644 --- a/arch/arm/plat-s3c/clock.c +++ b/arch/arm/plat-s3c/clock.c @@ -306,8 +306,6 @@ struct clk s3c24xx_uclk = { int s3c24xx_register_clock(struct clk *clk) { - clk->owner = THIS_MODULE; - if (clk->enable == NULL) clk->enable = clk_null_enable; -- cgit v1.2.2 From b4ecc126991b30fe5f9a59dfacda046aeac124b2 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Wed, 13 May 2009 17:16:55 -0700 Subject: x86: Fix performance regression caused by paravirt_ops on native kernels Xiaohui Xin and some other folks at Intel have been looking into what's behind the performance hit of paravirt_ops when running native. It appears that the hit is entirely due to the paravirtualized spinlocks introduced by: | commit 8efcbab674de2bee45a2e4cdf97de16b8e609ac8 | Date: Mon Jul 7 12:07:51 2008 -0700 | | paravirt: introduce a "lock-byte" spinlock implementation The extra call/return in the spinlock path is somehow causing an increase in the cycles/instruction of somewhere around 2-7% (seems to vary quite a lot from test to test). The working theory is that the CPU's pipeline is getting upset about the call->call->locked-op->return->return, and seems to be failing to speculate (though I haven't seen anything definitive about the precise reasons). This doesn't entirely make sense, because the performance hit is also visible on unlock and other operations which don't involve locked instructions. But spinlock operations clearly swamp all the other pvops operations, even though I can't imagine that they're nearly as common (there's only a .05% increase in instructions executed). If I disable just the pv-spinlock calls, my tests show that pvops is identical to non-pvops performance on native (my measurements show that it is actually about .1% faster, but Xiaohui shows a .05% slowdown). Summary of results, averaging 10 runs of the "mmperf" test, using a no-pvops build as baseline: nopv Pv-nospin Pv-spin CPU cycles 100.00% 99.89% 102.18% instructions 100.00% 100.10% 100.15% CPI 100.00% 99.79% 102.03% cache ref 100.00% 100.84% 100.28% cache miss 100.00% 90.47% 88.56% cache miss rate 100.00% 89.72% 88.31% branches 100.00% 99.93% 100.04% branch miss 100.00% 103.66% 107.72% branch miss rt 100.00% 103.73% 107.67% wallclock 100.00% 99.90% 102.20% The clear effect here is that the 2% increase in CPI is directly reflected in the final wallclock time. (The other interesting effect is that the more ops are out of line calls via pvops, the lower the cache access and miss rates. Not too surprising, but it suggests that the non-pvops kernel is over-inlined. On the flipside, the branch misses go up correspondingly...) So, what's the fix? Paravirt patching turns all the pvops calls into direct calls, so _spin_lock etc do end up having direct calls. For example, the compiler generated code for paravirtualized _spin_lock is: <_spin_lock+0>: mov %gs:0xb4c8,%rax <_spin_lock+9>: incl 0xffffffffffffe044(%rax) <_spin_lock+15>: callq *0xffffffff805a5b30 <_spin_lock+22>: retq The indirect call will get patched to: <_spin_lock+0>: mov %gs:0xb4c8,%rax <_spin_lock+9>: incl 0xffffffffffffe044(%rax) <_spin_lock+15>: callq <__ticket_spin_lock> <_spin_lock+20>: nop; nop /* or whatever 2-byte nop */ <_spin_lock+22>: retq One possibility is to inline _spin_lock, etc, when building an optimised kernel (ie, when there's no spinlock/preempt instrumentation/debugging enabled). That will remove the outer call/return pair, returning the instruction stream to a single call/return, which will presumably execute the same as the non-pvops case. The downsides arel 1) it will replicate the preempt_disable/enable code at eack lock/unlock callsite; this code is fairly small, but not nothing; and 2) the spinlock definitions are already a very heavily tangled mass of #ifdefs and other preprocessor magic, and making any changes will be non-trivial. The other obvious answer is to disable pv-spinlocks. Making them a separate config option is fairly easy, and it would be trivial to enable them only when Xen is enabled (as the only non-default user). But it doesn't really address the common case of a distro build which is going to have Xen support enabled, and leaves the open question of whether the native performance cost of pv-spinlocks is worth the performance improvement on a loaded Xen system (10% saving of overall system CPU when guests block rather than spin). Still it is a reasonable short-term workaround. [ Impact: fix pvops performance regression when running native ] Analysed-by: "Xin Xiaohui" Analysed-by: "Li Xin" Analysed-by: "Nakajima Jun" Signed-off-by: Jeremy Fitzhardinge Acked-by: H. Peter Anvin Cc: Nick Piggin Cc: Xen-devel LKML-Reference: <4A0B62F7.5030802@goop.org> [ fixed the help text ] Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 13 +++++++++++++ arch/x86/include/asm/paravirt.h | 2 +- arch/x86/include/asm/spinlock.h | 4 ++-- arch/x86/kernel/Makefile | 3 ++- arch/x86/kernel/paravirt.c | 2 ++ arch/x86/xen/Makefile | 5 +++-- arch/x86/xen/xen-ops.h | 19 +++++++++++++++---- 7 files changed, 38 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index df9e885eee14..a6efe0a2e9ae 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -498,6 +498,19 @@ config PARAVIRT over full virtualization. However, when run without a hypervisor the kernel is theoretically slower and slightly larger. +config PARAVIRT_SPINLOCKS + bool "Paravirtualization layer for spinlocks" + depends on PARAVIRT && SMP && EXPERIMENTAL + ---help--- + Paravirtualized spinlocks allow a pvops backend to replace the + spinlock implementation with something virtualization-friendly + (for example, block the virtual CPU rather than spinning). + + Unfortunately the downside is an up to 5% performance hit on + native kernels, with various workloads. + + If you are unsure how to answer this question, answer N. + config PARAVIRT_CLOCK bool default n diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h index 378e3691c08c..a53da004e08e 100644 --- a/arch/x86/include/asm/paravirt.h +++ b/arch/x86/include/asm/paravirt.h @@ -1443,7 +1443,7 @@ u64 _paravirt_ident_64(u64); #define paravirt_nop ((void *)_paravirt_nop) -#ifdef CONFIG_SMP +#if defined(CONFIG_SMP) && defined(CONFIG_PARAVIRT_SPINLOCKS) static inline int __raw_spin_is_locked(struct raw_spinlock *lock) { diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h index e5e6caffec87..b7e5db876399 100644 --- a/arch/x86/include/asm/spinlock.h +++ b/arch/x86/include/asm/spinlock.h @@ -172,7 +172,7 @@ static inline int __ticket_spin_is_contended(raw_spinlock_t *lock) return (((tmp >> TICKET_SHIFT) - tmp) & ((1 << TICKET_SHIFT) - 1)) > 1; } -#ifndef CONFIG_PARAVIRT +#ifndef CONFIG_PARAVIRT_SPINLOCKS static inline int __raw_spin_is_locked(raw_spinlock_t *lock) { @@ -206,7 +206,7 @@ static __always_inline void __raw_spin_lock_flags(raw_spinlock_t *lock, __raw_spin_lock(lock); } -#endif +#endif /* CONFIG_PARAVIRT_SPINLOCKS */ static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock) { diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 145cce75cda7..88d1bfc847d3 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -89,7 +89,8 @@ obj-$(CONFIG_DEBUG_NX_TEST) += test_nx.o obj-$(CONFIG_VMI) += vmi_32.o vmiclock_32.o obj-$(CONFIG_KVM_GUEST) += kvm.o obj-$(CONFIG_KVM_CLOCK) += kvmclock.o -obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_$(BITS).o paravirt-spinlocks.o +obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_$(BITS).o +obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= paravirt-spinlocks.o obj-$(CONFIG_PARAVIRT_CLOCK) += pvclock.o obj-$(CONFIG_PCSPKR_PLATFORM) += pcspeaker.o diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c index 8e45f4464880..9faf43bea336 100644 --- a/arch/x86/kernel/paravirt.c +++ b/arch/x86/kernel/paravirt.c @@ -134,7 +134,9 @@ static void *get_call_destination(u8 type) .pv_irq_ops = pv_irq_ops, .pv_apic_ops = pv_apic_ops, .pv_mmu_ops = pv_mmu_ops, +#ifdef CONFIG_PARAVIRT_SPINLOCKS .pv_lock_ops = pv_lock_ops, +#endif }; return *((void **)&tmpl + type); } diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile index 3b767d03fd6a..172438f86a02 100644 --- a/arch/x86/xen/Makefile +++ b/arch/x86/xen/Makefile @@ -9,5 +9,6 @@ obj-y := enlighten.o setup.o multicalls.o mmu.o irq.o \ time.o xen-asm.o xen-asm_$(BITS).o \ grant-table.o suspend.o -obj-$(CONFIG_SMP) += smp.o spinlock.o -obj-$(CONFIG_XEN_DEBUG_FS) += debugfs.o \ No newline at end of file +obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= spinlock.o +obj-$(CONFIG_XEN_DEBUG_FS) += debugfs.o diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 20139464943c..ca6596b05d53 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -62,15 +62,26 @@ void xen_setup_vcpu_info_placement(void); #ifdef CONFIG_SMP void xen_smp_init(void); -void __init xen_init_spinlocks(void); -__cpuinit void xen_init_lock_cpu(int cpu); -void xen_uninit_lock_cpu(int cpu); - extern cpumask_var_t xen_cpu_initialized_map; #else static inline void xen_smp_init(void) {} #endif +#ifdef CONFIG_PARAVIRT_SPINLOCKS +void __init xen_init_spinlocks(void); +__cpuinit void xen_init_lock_cpu(int cpu); +void xen_uninit_lock_cpu(int cpu); +#else +static inline void xen_init_spinlocks(void) +{ +} +static inline void xen_init_lock_cpu(int cpu) +{ +} +static inline void xen_uninit_lock_cpu(int cpu) +{ +} +#endif /* Declare an asm function, along with symbols needed to make it inlineable */ -- cgit v1.2.2 From e102657ed16bbed49820d9c58509220fc8d9289a Mon Sep 17 00:00:00 2001 From: Vikram Pandita Date: Sat, 16 May 2009 08:28:16 -0700 Subject: ARM: OMAP3: Fix number of GPIO lines for 34xx As per 3430 TRM, there are 6 banks [0 to 191] Signed-off-by: Tom Rix Signed-off-by: Vikram Pandita Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 17d7afe42b83..ee0b21f5b094 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -307,7 +307,7 @@ static inline int gpio_valid(int gpio) return 0; if (cpu_is_omap24xx() && gpio < 128) return 0; - if (cpu_is_omap34xx() && gpio < 160) + if (cpu_is_omap34xx() && gpio < 192) return 0; return -1; } -- cgit v1.2.2 From 8dbe43930a4e9bede88eb67a9c613773a2747caf Mon Sep 17 00:00:00 2001 From: Kalle Jokiniemi Date: Sat, 16 May 2009 08:28:17 -0700 Subject: ARM: OMAP3: Fix HW SAVEANDRESTORE shift define The OMAP3430ES2_SAVEANDRESTORE_SHIFT macro is used by powerdomain code in "1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT" manner, but the definition was also (1 << 4), meaning we actually modified bit 16. So the definition needs to be 4. This fixes also a cold reset HW bug in OMAP3430 ES3.x where some of the efuse bits are not isolated during wake-up from off mode. This can cause randomish cold resets with off mode. Enabling the USBTLL hardware SAVEANDRESTORE causes the core power up assert to be delayed in a way that we will not get faulty values when boot ROM is reading the unisolated registers. Signed-off-by: Kalle Jokiniemi Acked-by: Kevin Hilman Acked-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/prm-regbits-34xx.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h index c6a7940f4287..9fd03a2ec95c 100644 --- a/arch/arm/mach-omap2/prm-regbits-34xx.h +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h @@ -409,7 +409,7 @@ /* PM_PREPWSTST_CAM specific bits */ /* PM_PWSTCTRL_USBHOST specific bits */ -#define OMAP3430ES2_SAVEANDRESTORE_SHIFT (1 << 4) +#define OMAP3430ES2_SAVEANDRESTORE_SHIFT 4 /* RM_RSTST_PER specific bits */ -- cgit v1.2.2 From 005187eecaa400b4b43d9f640fbde9fcc50f37c1 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Sat, 16 May 2009 08:28:17 -0700 Subject: ARM: OMAP2/3: Change omapfb to use clkdev for dispc and rfbi, v2 This makes the framebuffer work on omap3. Also fix the clk_get usage for checkpatch.pl "ERROR: do not use assignment in if condition". Cc: Imre Deak Cc: linux-fbdev-devel@lists.sourceforge.net Acked-by: Krzysztof Helt Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/clock24xx.c | 8 ++++---- arch/arm/mach-omap2/clock34xx.c | 10 +++++----- 2 files changed, 9 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index ff9b4c0b00ae..e4cef333e291 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -103,10 +103,10 @@ static struct omap_clk omap24xx_clks[] = { CLK(NULL, "mdm_ick", &mdm_ick, CK_243X), CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X), /* DSS domain clocks */ - CLK(NULL, "dss_ick", &dss_ick, CK_243X | CK_242X), - CLK(NULL, "dss1_fck", &dss1_fck, CK_243X | CK_242X), - CLK(NULL, "dss2_fck", &dss2_fck, CK_243X | CK_242X), - CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_243X | CK_242X), + CLK("omapfb", "ick", &dss_ick, CK_243X | CK_242X), + CLK("omapfb", "dss1_fck", &dss1_fck, CK_243X | CK_242X), + CLK("omapfb", "dss2_fck", &dss2_fck, CK_243X | CK_242X), + CLK("omapfb", "tv_fck", &dss_54m_fck, CK_243X | CK_242X), /* L3 domain clocks */ CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X), CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X), diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index a0575393d0ea..ba05aa42bd8e 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -197,11 +197,11 @@ static struct omap_clk omap34xx_clks[] = { CLK("omap_rng", "ick", &rng_ick, CK_343X), CLK(NULL, "sha11_ick", &sha11_ick, CK_343X), CLK(NULL, "des1_ick", &des1_ick, CK_343X), - CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck, CK_343X), - CLK(NULL, "dss_tv_fck", &dss_tv_fck, CK_343X), - CLK(NULL, "dss_96m_fck", &dss_96m_fck, CK_343X), - CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck, CK_343X), - CLK(NULL, "dss_ick", &dss_ick, CK_343X), + CLK("omapfb", "dss1_fck", &dss1_alwon_fck, CK_343X), + CLK("omapfb", "tv_fck", &dss_tv_fck, CK_343X), + CLK("omapfb", "video_fck", &dss_96m_fck, CK_343X), + CLK("omapfb", "dss2_fck", &dss2_alwon_fck, CK_343X), + CLK("omapfb", "ick", &dss_ick, CK_343X), CLK(NULL, "cam_mclk", &cam_mclk, CK_343X), CLK(NULL, "cam_ick", &cam_ick, CK_343X), CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X), -- cgit v1.2.2 From ff05c0330b9880f9ccbb7fa40f2ed3b5842f5693 Mon Sep 17 00:00:00 2001 From: Hartley Sweeten Date: Thu, 7 May 2009 18:41:47 +0100 Subject: [ARM] 5509/1: ep93xx: clkdev enable UARTS Fix the clkdev API support for the ep93xx uart clocks. The uarts available in the ep93xx have individual clock controls. The current implementation assumes that the bootloader has enabled the clocks before the kernel has booted. It also assumes that the bootloader has set the UARTBAUD bit indicating that the uarts are running off the 14.7456MHz external crystal. This fixes both issues. It also allows the uart clocks to be stopped when there are no users. Tested-by: Matthias Kaehlcke Cc: Ryan Mallon Signed-off-by: H Hartley Sweeten Signed-off-by: Russell King --- arch/arm/mach-ep93xx/clock.c | 69 ++++++++++++++++++++++--- arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h | 5 +- 2 files changed, 65 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index e8ebeaea6c48..b2eede5531c8 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -21,15 +21,50 @@ #include #include + +/* + * The EP93xx has two external crystal oscillators. To generate the + * required high-frequency clocks, the processor uses two phase-locked- + * loops (PLLs) to multiply the incoming external clock signal to much + * higher frequencies that are then divided down by programmable dividers + * to produce the needed clocks. The PLLs operate independently of one + * another. + */ +#define EP93XX_EXT_CLK_RATE 14745600 +#define EP93XX_EXT_RTC_RATE 32768 + + struct clk { unsigned long rate; int users; + int sw_locked; u32 enable_reg; u32 enable_mask; + + unsigned long (*get_rate)(struct clk *clk); }; -static struct clk clk_uart = { - .rate = 14745600, + +static unsigned long get_uart_rate(struct clk *clk); + + +static struct clk clk_uart1 = { + .sw_locked = 1, + .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG, + .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U1EN, + .get_rate = get_uart_rate, +}; +static struct clk clk_uart2 = { + .sw_locked = 1, + .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG, + .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U2EN, + .get_rate = get_uart_rate, +}; +static struct clk clk_uart3 = { + .sw_locked = 1, + .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG, + .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U3EN, + .get_rate = get_uart_rate, }; static struct clk clk_pll1; static struct clk clk_f; @@ -95,9 +130,9 @@ static struct clk clk_m2m1 = { { .dev_id = dev, .con_id = con, .clk = ck } static struct clk_lookup clocks[] = { - INIT_CK("apb:uart1", NULL, &clk_uart), - INIT_CK("apb:uart2", NULL, &clk_uart), - INIT_CK("apb:uart3", NULL, &clk_uart), + INIT_CK("apb:uart1", NULL, &clk_uart1), + INIT_CK("apb:uart2", NULL, &clk_uart2), + INIT_CK("apb:uart3", NULL, &clk_uart3), INIT_CK(NULL, "pll1", &clk_pll1), INIT_CK(NULL, "fclk", &clk_f), INIT_CK(NULL, "hclk", &clk_h), @@ -125,6 +160,8 @@ int clk_enable(struct clk *clk) u32 value; value = __raw_readl(clk->enable_reg); + if (clk->sw_locked) + __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); __raw_writel(value | clk->enable_mask, clk->enable_reg); } @@ -138,13 +175,29 @@ void clk_disable(struct clk *clk) u32 value; value = __raw_readl(clk->enable_reg); + if (clk->sw_locked) + __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); __raw_writel(value & ~clk->enable_mask, clk->enable_reg); } } EXPORT_SYMBOL(clk_disable); +static unsigned long get_uart_rate(struct clk *clk) +{ + u32 value; + + value = __raw_readl(EP93XX_SYSCON_CLOCK_CONTROL); + if (value & EP93XX_SYSCON_CLOCK_UARTBAUD) + return EP93XX_EXT_CLK_RATE; + else + return EP93XX_EXT_CLK_RATE / 2; +} + unsigned long clk_get_rate(struct clk *clk) { + if (clk->get_rate) + return clk->get_rate(clk); + return clk->rate; } EXPORT_SYMBOL(clk_get_rate); @@ -162,7 +215,7 @@ static unsigned long calc_pll_rate(u32 config_word) unsigned long long rate; int i; - rate = 14745600; + rate = EP93XX_EXT_CLK_RATE; rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD */ rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD */ do_div(rate, (config_word & 0x1f) + 1); /* X2IPD */ @@ -195,7 +248,7 @@ static int __init ep93xx_clock_init(void) value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1); if (!(value & 0x00800000)) { /* PLL1 bypassed? */ - clk_pll1.rate = 14745600; + clk_pll1.rate = EP93XX_EXT_CLK_RATE; } else { clk_pll1.rate = calc_pll_rate(value); } @@ -206,7 +259,7 @@ static int __init ep93xx_clock_init(void) value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2); if (!(value & 0x00080000)) { /* PLL2 bypassed? */ - clk_pll2.rate = 14745600; + clk_pll2.rate = EP93XX_EXT_CLK_RATE; } else if (value & 0x00040000) { /* PLL2 enabled? */ clk_pll2.rate = calc_pll_rate(value); } else { diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h index f66be12b856e..1732de7629a5 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h @@ -159,7 +159,10 @@ #define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20) #define EP93XX_SYSCON_CLOCK_SET2 EP93XX_SYSCON_REG(0x24) #define EP93XX_SYSCON_DEVICE_CONFIG EP93XX_SYSCON_REG(0x80) -#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE 0x00800000 +#define EP93XX_SYSCON_DEVICE_CONFIG_U3EN (1<<24) +#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE (1<<23) +#define EP93XX_SYSCON_DEVICE_CONFIG_U2EN (1<<20) +#define EP93XX_SYSCON_DEVICE_CONFIG_U1EN (1<<18) #define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0) #define EP93XX_WATCHDOG_BASE (EP93XX_APB_VIRT_BASE + 0x00140000) -- cgit v1.2.2 From 776abac81764847338a6a02c34609d4b8dfb4918 Mon Sep 17 00:00:00 2001 From: Ricardo Martins Date: Mon, 11 May 2009 00:15:08 +0100 Subject: [ARM] 5513/1: Eurotech VIPER SBC: fix compilation error Compilation for this board yields the following errors: arch/arm/mach-pxa/viper.c:511: error: 'FFUART' undeclared here (not in a function) arch/arm/mach-pxa/viper.c:520: error: 'BTUART' undeclared here (not in a function) arch/arm/mach-pxa/viper.c:529: error: 'STUART' undeclared here (not in a function) Fix them by including the necessary header. Signed-off-by: Ricardo Martins Signed-off-by: Russell King --- arch/arm/mach-pxa/viper.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 0e65344e9f53..dd031cc41847 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -46,6 +46,7 @@ #include #include #include +#include #include #include -- cgit v1.2.2 From 826681043d7184b4d650cab5b007b9a86b628eb5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 17 May 2009 16:20:18 +0100 Subject: [ARM] smp: fix cpumask usage in ARM SMP code The ARM SMP code wasn't properly updated for the cpumask changes, which results in smp_timer_broadcast() broadcasting ticks to non-online CPUs. Signed-off-by: Russell King --- arch/arm/common/gic.c | 4 +-- arch/arm/include/asm/hardware/gic.h | 2 +- arch/arm/include/asm/smp.h | 12 +++----- arch/arm/kernel/smp.c | 46 +++++++++++-------------------- arch/arm/mach-realview/include/mach/smp.h | 6 ++-- arch/arm/mach-realview/platsmp.c | 4 +-- 6 files changed, 28 insertions(+), 46 deletions(-) (limited to 'arch') diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index c6884ba1d5ed..3e1714c6523f 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -253,9 +253,9 @@ void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base) } #ifdef CONFIG_SMP -void gic_raise_softirq(cpumask_t cpumask, unsigned int irq) +void gic_raise_softirq(const struct cpumask *mask, unsigned int irq) { - unsigned long map = *cpus_addr(cpumask); + unsigned long map = *cpus_addr(*mask); /* this always happens on GIC0 */ writel(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT); diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h index 4924914af188..7f34333bb545 100644 --- a/arch/arm/include/asm/hardware/gic.h +++ b/arch/arm/include/asm/hardware/gic.h @@ -36,7 +36,7 @@ void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start); void gic_cpu_init(unsigned int gic_nr, void __iomem *base); void gic_cascade_irq(unsigned int gic_nr, unsigned int irq); -void gic_raise_softirq(cpumask_t cpumask, unsigned int irq); +void gic_raise_softirq(const struct cpumask *mask, unsigned int irq); #endif #endif diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index fad70da5911d..5995935338e1 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -53,17 +53,12 @@ extern void smp_store_cpu_info(unsigned int cpuid); /* * Raise an IPI cross call on CPUs in callmap. */ -extern void smp_cross_call(cpumask_t callmap); - -/* - * Broadcast a timer interrupt to the other CPUs. - */ -extern void smp_send_timer(void); +extern void smp_cross_call(const struct cpumask *mask); /* * Broadcast a clock event to other CPUs. */ -extern void smp_timer_broadcast(cpumask_t mask); +extern void smp_timer_broadcast(const struct cpumask *mask); /* * Boot a secondary CPU, and assign it the specified idle task. @@ -102,7 +97,8 @@ extern int platform_cpu_kill(unsigned int cpu); extern void platform_cpu_enable(unsigned int cpu); extern void arch_send_call_function_single_ipi(int cpu); -extern void arch_send_call_function_ipi(cpumask_t mask); +extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); +#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask /* * Local timer interrupt handling function (can be IPI'ed). diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 7801aac3c043..6014dfd22af4 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -326,14 +326,14 @@ void __init smp_prepare_boot_cpu(void) per_cpu(cpu_data, cpu).idle = current; } -static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg) +static void send_ipi_message(const struct cpumask *mask, enum ipi_msg_type msg) { unsigned long flags; unsigned int cpu; local_irq_save(flags); - for_each_cpu_mask(cpu, callmap) { + for_each_cpu(cpu, mask) { struct ipi_data *ipi = &per_cpu(ipi_data, cpu); spin_lock(&ipi->lock); @@ -344,19 +344,19 @@ static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg) /* * Call the platform specific cross-CPU call function. */ - smp_cross_call(callmap); + smp_cross_call(mask); local_irq_restore(flags); } -void arch_send_call_function_ipi(cpumask_t mask) +void arch_send_call_function_ipi_mask(const struct cpumask *mask) { send_ipi_message(mask, IPI_CALL_FUNC); } void arch_send_call_function_single_ipi(int cpu) { - send_ipi_message(cpumask_of_cpu(cpu), IPI_CALL_FUNC_SINGLE); + send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE); } void show_ipi_list(struct seq_file *p) @@ -498,17 +498,10 @@ asmlinkage void __exception do_IPI(struct pt_regs *regs) void smp_send_reschedule(int cpu) { - send_ipi_message(cpumask_of_cpu(cpu), IPI_RESCHEDULE); + send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE); } -void smp_send_timer(void) -{ - cpumask_t mask = cpu_online_map; - cpu_clear(smp_processor_id(), mask); - send_ipi_message(mask, IPI_TIMER); -} - -void smp_timer_broadcast(cpumask_t mask) +void smp_timer_broadcast(const struct cpumask *mask) { send_ipi_message(mask, IPI_TIMER); } @@ -517,7 +510,7 @@ void smp_send_stop(void) { cpumask_t mask = cpu_online_map; cpu_clear(smp_processor_id(), mask); - send_ipi_message(mask, IPI_CPU_STOP); + send_ipi_message(&mask, IPI_CPU_STOP); } /* @@ -528,20 +521,17 @@ int setup_profiling_timer(unsigned int multiplier) return -EINVAL; } -static int -on_each_cpu_mask(void (*func)(void *), void *info, int wait, cpumask_t mask) +static void +on_each_cpu_mask(void (*func)(void *), void *info, int wait, + const struct cpumask *mask) { - int ret = 0; - preempt_disable(); - ret = smp_call_function_mask(mask, func, info, wait); - if (cpu_isset(smp_processor_id(), mask)) + smp_call_function_many(mask, func, info, wait); + if (cpumask_test_cpu(smp_processor_id(), mask)) func(info); preempt_enable(); - - return ret; } /**********************************************************************/ @@ -602,20 +592,17 @@ void flush_tlb_all(void) void flush_tlb_mm(struct mm_struct *mm) { - cpumask_t mask = mm->cpu_vm_mask; - - on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, mask); + on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask); } void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) { - cpumask_t mask = vma->vm_mm->cpu_vm_mask; struct tlb_args ta; ta.ta_vma = vma; ta.ta_start = uaddr; - on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, mask); + on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask); } void flush_tlb_kernel_page(unsigned long kaddr) @@ -630,14 +617,13 @@ void flush_tlb_kernel_page(unsigned long kaddr) void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { - cpumask_t mask = vma->vm_mm->cpu_vm_mask; struct tlb_args ta; ta.ta_vma = vma; ta.ta_start = start; ta.ta_end = end; - on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, mask); + on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask); } void flush_tlb_kernel_range(unsigned long start, unsigned long end) diff --git a/arch/arm/mach-realview/include/mach/smp.h b/arch/arm/mach-realview/include/mach/smp.h index 515819efd046..e2ff53402f8c 100644 --- a/arch/arm/mach-realview/include/mach/smp.h +++ b/arch/arm/mach-realview/include/mach/smp.h @@ -15,15 +15,15 @@ /* * We use IRQ1 as the IPI */ -static inline void smp_cross_call(cpumask_t callmap) +static inline void smp_cross_call(const struct cpumask *mask) { - gic_raise_softirq(callmap, 1); + gic_raise_softirq(mask, 1); } /* * Do nothing on MPcore. */ -static inline void smp_cross_call_done(cpumask_t callmap) +static inline void smp_cross_call_done(const struct cpumask *mask) { } diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index ea3c75595fa9..a5730466dff5 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -82,7 +82,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu) * to get this processor out of WFI in the BootMonitor - make * sure that we are no longer being sent this soft interrupt */ - smp_cross_call_done(cpumask_of_cpu(cpu)); + smp_cross_call_done(cpumask_of(cpu)); /* * if any interrupts are already enabled for the primary @@ -136,7 +136,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) * Use smp_cross_call() for this, since there's little * point duplicating the code here */ - smp_cross_call(cpumask_of_cpu(cpu)); + smp_cross_call(cpumask_of(cpu)); timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { -- cgit v1.2.2 From 78d236c2b30d4712c1fd8c9768b163c94b39e77d Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 17 May 2009 16:23:45 +0100 Subject: [ARM] realview: remove useless smp_cross_call_done() smp_cross_call_done() is a no-op for MPCore, and since it's only used by platform code, there's no point in having it unless it's doing something. Signed-off-by: Russell King --- arch/arm/mach-realview/include/mach/smp.h | 7 ------- arch/arm/mach-realview/platsmp.c | 7 ------- 2 files changed, 14 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-realview/include/mach/smp.h b/arch/arm/mach-realview/include/mach/smp.h index e2ff53402f8c..dd53892d44a7 100644 --- a/arch/arm/mach-realview/include/mach/smp.h +++ b/arch/arm/mach-realview/include/mach/smp.h @@ -20,11 +20,4 @@ static inline void smp_cross_call(const struct cpumask *mask) gic_raise_softirq(mask, 1); } -/* - * Do nothing on MPcore. - */ -static inline void smp_cross_call_done(const struct cpumask *mask) -{ -} - #endif diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index a5730466dff5..b037fd6c82dc 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -77,13 +77,6 @@ void __cpuinit platform_secondary_init(unsigned int cpu) { trace_hardirqs_off(); - /* - * the primary core may have used a "cross call" soft interrupt - * to get this processor out of WFI in the BootMonitor - make - * sure that we are no longer being sent this soft interrupt - */ - smp_cross_call_done(cpumask_of(cpu)); - /* * if any interrupts are already enabled for the primary * core (e.g. timer irq), then they will not have been enabled -- cgit v1.2.2 From ee348d5a1d810bc9958cabb7c27302aab235d36e Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 17 May 2009 17:00:47 +0100 Subject: [ARM] realview: fix broadcast tick support Having discussed broadcast tick support with Thomas Glexiner, the broadcast tick devices should be registered with a higher rating than the global tick device, and it should have the ONESHOT and PERIODIC feature flags set. Signed-off-by: Russell King Acked-by: Thomas Glexiner --- arch/arm/mach-realview/core.c | 8 -------- arch/arm/mach-realview/localtimer.c | 6 ++++-- arch/arm/mach-realview/platsmp.c | 6 ++---- 3 files changed, 6 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 942e1a7eb9b2..076acbc50706 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -750,14 +750,6 @@ void __init realview_timer_init(unsigned int timer_irq) { u32 val; -#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST - /* - * The dummy clock device has to be registered before the main device - * so that the latter will broadcast the clock events - */ - local_timer_setup(); -#endif - /* * set clock frequency: * REALVIEW_REFCLK is 32KHz diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c index d0d39adf6407..1c01d13460f0 100644 --- a/arch/arm/mach-realview/localtimer.c +++ b/arch/arm/mach-realview/localtimer.c @@ -189,8 +189,10 @@ void __cpuinit local_timer_setup(void) struct clock_event_device *clk = &per_cpu(local_clockevent, cpu); clk->name = "dummy_timer"; - clk->features = CLOCK_EVT_FEAT_DUMMY; - clk->rating = 200; + clk->features = CLOCK_EVT_FEAT_ONESHOT | + CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_DUMMY; + clk->rating = 400; clk->mult = 1; clk->set_mode = dummy_timer_set_mode; clk->broadcast = smp_timer_broadcast; diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index b037fd6c82dc..30a9c68591f6 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -217,11 +217,9 @@ void __init smp_prepare_cpus(unsigned int max_cpus) if (max_cpus > ncores) max_cpus = ncores; -#ifdef CONFIG_LOCAL_TIMERS +#if defined(CONFIG_LOCAL_TIMERS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) /* - * Enable the local timer for primary CPU. If the device is - * dummy (!CONFIG_LOCAL_TIMERS), it was already registers in - * realview_timer_init + * Enable the local timer or broadcast device for the boot CPU. */ local_timer_setup(); #endif -- cgit v1.2.2 From af3e4aca47d2e05a545a5e10ba5c7193e0b665e0 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Thu, 30 Apr 2009 10:59:19 +0000 Subject: powerpc: Do not assert pte_locked for hugepage PTE entries With CONFIG_DEBUG_VM, an assertion is made when changing the protection flags of a PTE that the PTE is locked. Huge pages use a different pagetable format and the assertion is bogus and will always trigger with a bug looking something like Unable to handle kernel paging request for data at address 0xf1a00235800006f8 Faulting instruction address: 0xc000000000034a80 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=32 NUMA Maple Modules linked in: dm_snapshot dm_mirror dm_region_hash dm_log dm_mod loop evdev ext3 jbd mbcache sg sd_mod ide_pci_generic pata_amd ata_generic ipr libata tg3 libphy scsi_mod windfarm_pid windfarm_smu_sat windfarm_max6690_sensor windfarm_lm75_sensor windfarm_cpufreq_clamp windfarm_core i2c_powermac NIP: c000000000034a80 LR: c000000000034b18 CTR: 0000000000000003 REGS: c000000003037600 TRAP: 0300 Not tainted (2.6.30-rc3-autokern1) MSR: 9000000000009032 CR: 28002484 XER: 200fffff DAR: f1a00235800006f8, DSISR: 0000000040010000 TASK = c0000002e54cc740[2960] 'map_high_trunca' THREAD: c000000003034000 CPU: 2 GPR00: 4000000000000000 c000000003037880 c000000000895d30 c0000002e5a2e500 GPR04: 00000000a0000000 c0000002edc40880 0000005700000393 0000000000000001 GPR08: f000000011ac0000 01a00235800006e8 00000000000000f5 f1a00235800006e8 GPR12: 0000000028000484 c0000000008dd780 0000000000001000 0000000000000000 GPR16: fffffffffffff000 0000000000000000 00000000a0000000 c000000003037a20 GPR20: c0000002e5f4ece8 0000000000001000 c0000002edc40880 0000000000000000 GPR24: c0000002e5f4ece8 0000000000000000 00000000a0000000 c0000002e5f4ece8 GPR28: 0000005700000393 c0000002e5a2e500 00000000a0000000 c000000003037880 NIP [c000000000034a80] .assert_pte_locked+0xa4/0xd0 LR [c000000000034b18] .ptep_set_access_flags+0x6c/0xb4 Call Trace: [c000000003037880] [c000000003037990] 0xc000000003037990 (unreliable) [c000000003037910] [c000000000034b18] .ptep_set_access_flags+0x6c/0xb4 [c0000000030379b0] [c00000000014bef8] .hugetlb_cow+0x124/0x674 [c000000003037b00] [c00000000014c930] .hugetlb_fault+0x4e8/0x6f8 [c000000003037c00] [c00000000013443c] .handle_mm_fault+0xac/0x828 [c000000003037cf0] [c0000000000340a8] .do_page_fault+0x39c/0x584 [c000000003037e30] [c0000000000057b0] handle_page_fault+0x20/0x5c Instruction dump: 7d29582a 7d200074 7800d182 0b000000 3c004000 3960ffff 780007c6 796b00c4 7d290214 7929a302 1d290068 7d6b4a14 <800b0010> 7c000074 7800d182 0b000000 This patch fixes the problem by not asseting the PTE is locked for VMAs backed by huge pages. Signed-off-by: Mel Gorman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/pgtable.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c index f5c6fd42265c..ae1d67cc090c 100644 --- a/arch/powerpc/mm/pgtable.c +++ b/arch/powerpc/mm/pgtable.c @@ -219,7 +219,8 @@ int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address, entry = do_dcache_icache_coherency(entry); changed = !pte_same(*(ptep), entry); if (changed) { - assert_pte_locked(vma->vm_mm, address); + if (!(vma->vm_flags & VM_HUGETLB)) + assert_pte_locked(vma->vm_mm, address); __ptep_set_access_flags(ptep, entry); flush_tlb_page_nohash(vma, address); } -- cgit v1.2.2 From 021376a3b655364c92c10be544a3319946a792e8 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 13 May 2009 20:30:24 +0000 Subject: powerpc/ftrace: Use pr_devel() in ftrace.c pr_debug() can now result in code being generated even when #DEBUG is not defined. That's not really desirable in the ftrace code which we want to be snappy. With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 3334 672 4 4010 faa arch/powerpc/kernel/ftrace.o size after: text data bss dec hex filename 2616 360 4 2980 ba4 arch/powerpc/kernel/ftrace.o Signed-off-by: Michael Ellerman Acked-by: Steven Rostedt Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/ftrace.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c index 70e2a736be1f..5b078ee391fc 100644 --- a/arch/powerpc/kernel/ftrace.c +++ b/arch/powerpc/kernel/ftrace.c @@ -157,7 +157,7 @@ __ftrace_make_nop(struct module *mod, * 0xe8, 0x4c, 0x00, 0x28, ld r2,40(r12) */ - pr_debug("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc); + pr_devel("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc); /* Find where the trampoline jumps to */ if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) { @@ -165,7 +165,7 @@ __ftrace_make_nop(struct module *mod, return -EFAULT; } - pr_debug(" %08x %08x", jmp[0], jmp[1]); + pr_devel(" %08x %08x", jmp[0], jmp[1]); /* verify that this is what we expect it to be */ if (((jmp[0] & 0xffff0000) != 0x3d820000) || @@ -181,18 +181,18 @@ __ftrace_make_nop(struct module *mod, offset = ((unsigned)((unsigned short)jmp[0]) << 16) + (int)((short)jmp[1]); - pr_debug(" %x ", offset); + pr_devel(" %x ", offset); /* get the address this jumps too */ tramp = mod->arch.toc + offset + 32; - pr_debug("toc: %lx", tramp); + pr_devel("toc: %lx", tramp); if (probe_kernel_read(jmp, (void *)tramp, 8)) { printk(KERN_ERR "Failed to read %lx\n", tramp); return -EFAULT; } - pr_debug(" %08x %08x\n", jmp[0], jmp[1]); + pr_devel(" %08x %08x\n", jmp[0], jmp[1]); ptr = ((unsigned long)jmp[0] << 32) + jmp[1]; @@ -269,7 +269,7 @@ __ftrace_make_nop(struct module *mod, * 0x4e, 0x80, 0x04, 0x20 bctr */ - pr_debug("ip:%lx jumps to %lx", ip, tramp); + pr_devel("ip:%lx jumps to %lx", ip, tramp); /* Find where the trampoline jumps to */ if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) { @@ -277,7 +277,7 @@ __ftrace_make_nop(struct module *mod, return -EFAULT; } - pr_debug(" %08x %08x ", jmp[0], jmp[1]); + pr_devel(" %08x %08x ", jmp[0], jmp[1]); /* verify that this is what we expect it to be */ if (((jmp[0] & 0xffff0000) != 0x3d600000) || @@ -293,7 +293,7 @@ __ftrace_make_nop(struct module *mod, if (tramp & 0x8000) tramp -= 0x10000; - pr_debug(" %lx ", tramp); + pr_devel(" %lx ", tramp); if (tramp != addr) { printk(KERN_ERR @@ -402,7 +402,7 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) /* ld r2,40(r1) */ op[1] = 0xe8410028; - pr_debug("write to %lx\n", rec->ip); + pr_devel("write to %lx\n", rec->ip); if (probe_kernel_write((void *)ip, op, MCOUNT_INSN_SIZE * 2)) return -EPERM; @@ -442,7 +442,7 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) return -EINVAL; } - pr_debug("write to %lx\n", rec->ip); + pr_devel("write to %lx\n", rec->ip); if (probe_kernel_write((void *)ip, &op, MCOUNT_INSN_SIZE)) return -EPERM; -- cgit v1.2.2 From c3cf8667ed7db58c1960958cbb0a9098d513cc60 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 15 May 2009 04:33:54 +0000 Subject: powerpc/ftrace: Fix constraint to be early clobber After upgrading my distcc boxes from gcc 4.2.2 to 4.4.0, the function graph tracer broke. This was discovered on my x86 boxes. The issue is that gcc used the same register for an output as it did for an input in an asm statement. I first thought this was a bug in gcc and reported it. I was notified that gcc was correct and that the output had to be flagged as an "early clobber". I noticed that powerpc had the same issue and this patch fixes it. Signed-off-by: Steven Rostedt Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/ftrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c index 5b078ee391fc..2d182f119d1d 100644 --- a/arch/powerpc/kernel/ftrace.c +++ b/arch/powerpc/kernel/ftrace.c @@ -594,7 +594,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) PPC_LONG "2b,4b\n" ".previous" - : [old] "=r" (old), [faulted] "=r" (faulted) + : [old] "=&r" (old), [faulted] "=r" (faulted) : [parent] "r" (parent), [return_hooker] "r" (return_hooker) : "memory" ); -- cgit v1.2.2 From dc892288f42661a140124ecbf9d44850a95de222 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Fri, 15 May 2009 08:01:59 +0000 Subject: powerpc/ps3: Update ps3_defconfig Refresh and set these options: CONFIG_SYSFS_DEPRECATED_V2: y -> n CONFIG_INPUT_JOYSTICK: y -> n CONFIG_HID_SONY: n -> m CONFIG_RTC_DRV_PS3: - -> m Signed-off-by: Geoff Levand Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/ps3_defconfig | 105 ++++++++++++++++++++++--------------- 1 file changed, 62 insertions(+), 43 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig index ac14f5245d2a..e28e65e7a0e1 100644 --- a/arch/powerpc/configs/ps3_defconfig +++ b/arch/powerpc/configs/ps3_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc8 -# Fri Mar 13 09:28:45 2009 +# Linux kernel version: 2.6.30-rc5 +# Fri May 15 10:37:00 2009 # CONFIG_PPC64=y # # Processor support # +CONFIG_PPC_BOOK3S=y # CONFIG_POWER4_ONLY is not set CONFIG_POWER3=y CONFIG_POWER4=y @@ -55,9 +56,11 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -72,6 +75,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set @@ -88,8 +92,7 @@ CONFIG_CLASSIC_RCU=y CONFIG_LOG_BUF_SHIFT=17 # CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set @@ -99,6 +102,9 @@ CONFIG_NAMESPACES=y # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -107,6 +113,7 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -138,6 +145,7 @@ CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -150,7 +158,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y @@ -172,7 +179,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y # CONFIG_PPC_PSERIES is not set # CONFIG_PPC_ISERIES is not set # CONFIG_PPC_PMAC is not set @@ -209,6 +215,7 @@ CONFIG_SPU_FS_64K_LS=y # CONFIG_SPU_TRACE is not set CONFIG_SPU_BASE=y # CONFIG_PQ2ADS is not set +# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -279,11 +286,14 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ARCH_MEMORY_PROBE=y CONFIG_PPC_HAS_HASH_64K=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_SCHED_SMT=y CONFIG_PROC_DEVICETREE=y @@ -316,7 +326,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -389,6 +398,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -396,6 +406,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set @@ -419,11 +430,9 @@ CONFIG_BT_HCIBTUSB=m # CONFIG_BT_HCIBFUSB is not set # CONFIG_BT_HCIVHCI is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y CONFIG_CFG80211=m # CONFIG_CFG80211_REG_DEBUG is not set -CONFIG_NL80211=y # CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y # CONFIG_WIRELESS_EXT_SYSFS is not set @@ -602,6 +611,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set CONFIG_MD=y # CONFIG_BLK_DEV_MD is not set @@ -616,6 +626,7 @@ CONFIG_BLK_DEV_DM=m # CONFIG_DM_UEVENT is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -625,6 +636,8 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=m +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -646,12 +659,13 @@ CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE=y CONFIG_WLAN_80211=y # CONFIG_LIBERTAS is not set # CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_AT76C50X_USB is not set # CONFIG_USB_ZD1201 is not set # CONFIG_USB_NET_RNDIS_WLAN is not set # CONFIG_RTL8187 is not set # CONFIG_MAC80211_HWSIM is not set # CONFIG_P54_COMMON is not set -# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_AR9170_USB is not set # CONFIG_HOSTAP is not set # CONFIG_B43 is not set # CONFIG_B43LEGACY is not set @@ -673,6 +687,7 @@ CONFIG_USB_PEGASUS=m CONFIG_USB_USBNET=m CONFIG_USB_NET_AX8817X=m # CONFIG_USB_NET_CDCETHER is not set +# CONFIG_USB_NET_CDC_EEM is not set # CONFIG_USB_NET_DM9601 is not set # CONFIG_USB_NET_SMSC95XX is not set # CONFIG_USB_NET_GL620A is not set @@ -724,28 +739,7 @@ CONFIG_INPUT_EVDEV=m # # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_JOYSTICK=y -# CONFIG_JOYSTICK_ANALOG is not set -# CONFIG_JOYSTICK_A3D is not set -# CONFIG_JOYSTICK_ADI is not set -# CONFIG_JOYSTICK_COBRA is not set -# CONFIG_JOYSTICK_GF2K is not set -# CONFIG_JOYSTICK_GRIP is not set -# CONFIG_JOYSTICK_GRIP_MP is not set -# CONFIG_JOYSTICK_GUILLEMOT is not set -# CONFIG_JOYSTICK_INTERACT is not set -# CONFIG_JOYSTICK_SIDEWINDER is not set -# CONFIG_JOYSTICK_TMDC is not set -# CONFIG_JOYSTICK_IFORCE is not set -# CONFIG_JOYSTICK_WARRIOR is not set -# CONFIG_JOYSTICK_MAGELLAN is not set -# CONFIG_JOYSTICK_SPACEORB is not set -# CONFIG_JOYSTICK_SPACEBALL is not set -# CONFIG_JOYSTICK_STINGER is not set -# CONFIG_JOYSTICK_TWIDJOY is not set -# CONFIG_JOYSTICK_ZHENHUA is not set -# CONFIG_JOYSTICK_JOYDUMP is not set -# CONFIG_JOYSTICK_XPAD is not set +# CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -864,6 +858,7 @@ CONFIG_FB_PS3_DEFAULT_SIZE_M=9 # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -934,15 +929,17 @@ CONFIG_USB_HIDDEV=y # # Special HID drivers # -# CONFIG_HID_COMPAT is not set # CONFIG_HID_A4TECH is not set # CONFIG_HID_APPLE is not set # CONFIG_HID_BELKIN is not set # CONFIG_HID_CHERRY is not set # CONFIG_HID_CHICONY is not set # CONFIG_HID_CYPRESS is not set +# CONFIG_DRAGONRISE_FF is not set # CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set # CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MICROSOFT is not set # CONFIG_HID_MONTEREY is not set @@ -950,7 +947,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_HID_PANTHERLORD is not set # CONFIG_HID_PETALYNX is not set # CONFIG_HID_SAMSUNG is not set -# CONFIG_HID_SONY is not set +CONFIG_HID_SONY=m # CONFIG_HID_SUNPLUS is not set # CONFIG_GREENASIA_FF is not set # CONFIG_HID_TOPSEED is not set @@ -1012,11 +1009,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -1058,7 +1055,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1074,6 +1070,7 @@ CONFIG_USB_STORAGE=m # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1113,8 +1110,10 @@ CONFIG_RTC_INTF_DEV=y # # on-CPU RTC drivers # -CONFIG_RTC_DRV_PPC=m +# CONFIG_RTC_DRV_GENERIC is not set +CONFIG_RTC_DRV_PS3=m # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1125,6 +1124,7 @@ CONFIG_EXT2_FS=m # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=m +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1160,6 +1160,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1211,6 +1216,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1223,7 +1229,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1283,6 +1288,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +CONFIG_BINARY_PRINTF=y # # Library routines @@ -1296,15 +1302,16 @@ CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1322,6 +1329,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1357,12 +1367,15 @@ CONFIG_DEBUG_LIST=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1371,18 +1384,21 @@ CONFIG_TRACING=y # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1415,10 +1431,12 @@ CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=m CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1487,6 +1505,7 @@ CONFIG_CRYPTO_SALSA20=m # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set CONFIG_CRYPTO_LZO=m # -- cgit v1.2.2 From 0e337b42d620ca7c45fe64e64dd71957c56216c9 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sun, 17 May 2009 18:29:03 +0000 Subject: powerpc: Explicit alignment for .data.cacheline_aligned I don't think anything guarantees that the objects in data.page_aligned are a multiple of PAGE_SIZE, thus the section may end on any boundary. So the following section, .data.cacheline_aligned needs an explicit alignment. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/vmlinux.lds.S | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index a047a6cfca4d..8ef8a14abc95 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -264,6 +264,7 @@ SECTIONS *(.data.page_aligned) } + . = ALIGN(L1_CACHE_BYTES); .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) { *(.data.cacheline_aligned) } -- cgit v1.2.2 From eb33575cf67d3f35fa2510210ef92631266e2465 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Wed, 13 May 2009 17:34:48 +0100 Subject: [ARM] Double check memmap is actually valid with a memmap has unexpected holes V2 pfn_valid() is meant to be able to tell if a given PFN has valid memmap associated with it or not. In FLATMEM, it is expected that holes always have valid memmap as long as there is valid PFNs either side of the hole. In SPARSEMEM, it is assumed that a valid section has a memmap for the entire section. However, ARM and maybe other embedded architectures in the future free memmap backing holes to save memory on the assumption the memmap is never used. The page_zone linkages are then broken even though pfn_valid() returns true. A walker of the full memmap must then do this additional check to ensure the memmap they are looking at is sane by making sure the zone and PFN linkages are still valid. This is expensive, but walkers of the full memmap are extremely rare. This was caught before for FLATMEM and hacked around but it hits again for SPARSEMEM because the page_zone linkages can look ok where the PFN linkages are totally screwed. This looks like a hatchet job but the reality is that any clean solution would end up consumning all the memory saved by punching these unexpected holes in the memmap. For example, we tried marking the memmap within the section invalid but the section size exceeds the size of the hole in most cases so pfn_valid() starts returning false where valid memmap exists. Shrinking the size of the section would increase memory consumption offsetting the gains. This patch identifies when an architecture is punching unexpected holes in the memmap that the memory model cannot automatically detect and sets ARCH_HAS_HOLES_MEMORYMODEL. At the moment, this is restricted to EP93xx which is the model sub-architecture this has been reported on but may expand later. When set, walkers of the full memmap must call memmap_valid_within() for each PFN and passing in what it expects the page and zone to be for that PFN. If it finds the linkages to be broken, it assumes the memmap is invalid for that PFN. Signed-off-by: Mel Gorman Signed-off-by: Russell King --- arch/arm/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e60ec54df334..9d02cdb15b23 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -273,6 +273,7 @@ config ARCH_EP93XX select HAVE_CLK select COMMON_CLKDEV select ARCH_REQUIRE_GPIOLIB + select ARCH_HAS_HOLES_MEMORYMODEL help This enables support for the Cirrus EP93xx series of CPUs. @@ -976,10 +977,9 @@ config OABI_COMPAT UNPREDICTABLE (in fact it can be predicted that it won't work at all). If in doubt say Y. -config ARCH_FLATMEM_HAS_HOLES +config ARCH_HAS_HOLES_MEMORYMODEL bool - default y - depends on FLATMEM + default n # Discontigmem is deprecated config ARCH_DISCONTIGMEM_ENABLE -- cgit v1.2.2 From 8190b37f6483fedc530110d8c7d710d1c0317ba4 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Tue, 12 May 2009 13:36:46 -0700 Subject: [ARM] mach-l7200: fix spelling of SYS_CLOCK_OFF Signed-off-by: Pavel Roskin Signed-off-by: Andrew Morton Signed-off-by: Russell King --- arch/arm/mach-l7200/include/mach/sys-clock.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-l7200/include/mach/sys-clock.h b/arch/arm/mach-l7200/include/mach/sys-clock.h index 2d7722be60ea..e9729a35751d 100644 --- a/arch/arm/mach-l7200/include/mach/sys-clock.h +++ b/arch/arm/mach-l7200/include/mach/sys-clock.h @@ -18,7 +18,7 @@ /* IO_START and IO_BASE are defined in hardware.h */ -#define SYS_CLOCK_START (IO_START + SYS_CLCOK_OFF) /* Physical address */ +#define SYS_CLOCK_START (IO_START + SYS_CLOCK_OFF) /* Physical address */ #define SYS_CLOCK_BASE (IO_BASE + SYS_CLOCK_OFF) /* Virtual address */ /* Define the interface to the SYS_CLOCK */ -- cgit v1.2.2 From 3026589c1bc17b0c389b95afec127e92e2a745e2 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 11 May 2009 09:24:47 +0200 Subject: microblaze: Update Microblaze defconfig Signed-off-by: Michal Simek --- arch/microblaze/configs/nommu_defconfig | 50 +++++++++++++++++++++------------ 1 file changed, 32 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig index beb7ecd72793..4ef6af0a8f31 100644 --- a/arch/microblaze/configs/nommu_defconfig +++ b/arch/microblaze/configs/nommu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Tue Mar 24 10:23:20 2009 +# Linux kernel version: 2.6.30-rc5 +# Mon May 11 09:01:02 2009 # CONFIG_MICROBLAZE=y # CONFIG_SWAP is not set @@ -32,6 +32,7 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set @@ -63,6 +64,7 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -80,6 +82,8 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -92,7 +96,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -166,6 +169,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1 # # Exectuable file formats @@ -180,7 +185,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -232,6 +236,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -244,7 +249,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -379,6 +383,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -388,6 +393,7 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set # CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set @@ -405,7 +411,6 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -455,6 +460,7 @@ CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set @@ -525,7 +531,7 @@ CONFIG_USB_SUPPORT=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -538,6 +544,7 @@ CONFIG_USB_SUPPORT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -562,6 +569,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -601,8 +613,13 @@ CONFIG_CRAMFS=y # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -614,7 +631,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -647,6 +663,9 @@ CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y @@ -678,15 +697,8 @@ CONFIG_DEBUG_SG=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_PAGE_POISONING is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_EARLY_PRINTK=y CONFIG_HEART_BEAT=y @@ -777,6 +789,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -784,6 +797,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -797,8 +811,8 @@ CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y -- cgit v1.2.2 From 7b7210d7a9d260becef4dba98b9075e2c9b41f93 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 14 May 2009 13:35:52 +0200 Subject: microblaze: Fix kind-of-intr checking against number of interrupts + Fix typographic fault. Signed-off-by: Michal Simek --- arch/microblaze/kernel/intc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c index a69d3e3c2fd4..b15605299a57 100644 --- a/arch/microblaze/kernel/intc.c +++ b/arch/microblaze/kernel/intc.c @@ -137,8 +137,8 @@ void __init init_IRQ(void) intr_type = *(int *) of_get_property(intc, "xlnx,kind-of-intr", NULL); - if (intr_type >= (1 << nr_irq)) - printk(KERN_INFO " ERROR: Mishmash in king-of-intr param\n"); + if (intr_type >= (1 << (nr_irq + 1))) + printk(KERN_INFO " ERROR: Mismatch in kind-of-intr param\n"); #ifdef CONFIG_SELFMOD_INTC selfmod_function((int *) arr_func, intc_baseaddr); -- cgit v1.2.2 From 818bc814447a35350ae90a329133e474bf1a2bd7 Mon Sep 17 00:00:00 2001 From: Daniel Ribeiro Date: Sat, 2 May 2009 15:05:59 -0300 Subject: [ARM] pxa: save/restore PGSR on suspend/resume. Signed-off-by: Daniel Ribeiro Signed-off-by: Eric Miao --- arch/arm/mach-pxa/mfp-pxa2xx.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index 7ffb91d64c39..6ae50604170d 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -322,6 +322,7 @@ static inline void pxa27x_mfp_init(void) {} #ifdef CONFIG_PM static unsigned long saved_gafr[2][4]; static unsigned long saved_gpdr[4]; +static unsigned long saved_pgsr[4]; static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state) { @@ -332,6 +333,7 @@ static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state) saved_gafr[0][i] = GAFR_L(i); saved_gafr[1][i] = GAFR_U(i); saved_gpdr[i] = GPDR(i * 32); + saved_pgsr[i] = PGSR(i); GPDR(i * 32) = gpdr_lpm[i]; } @@ -346,6 +348,7 @@ static int pxa2xx_mfp_resume(struct sys_device *d) GAFR_L(i) = saved_gafr[0][i]; GAFR_U(i) = saved_gafr[1][i]; GPDR(i * 32) = saved_gpdr[i]; + PGSR(i) = saved_pgsr[i]; } PSSR = PSSR_RDH | PSSR_PH; return 0; -- cgit v1.2.2 From 216e3b7abbd05c35d2d1a3f86629ade485351f0d Mon Sep 17 00:00:00 2001 From: Daniel Ribeiro Date: Tue, 5 May 2009 22:43:18 -0300 Subject: [ARM] pxa: allow gpio_reset drive high during normal work I want to reuse tosa/spitz gpio_reset code, but my board needs the reset gpio to be driven high during normal operation. Signed-off-by: Daniel Ribeiro Acked-by: Dmitry Eremin-Solenikov Signed-off-by: Eric Miao --- arch/arm/mach-pxa/include/mach/reset.h | 5 +++-- arch/arm/mach-pxa/reset.c | 4 ++-- arch/arm/mach-pxa/spitz.c | 2 +- arch/arm/mach-pxa/tosa.c | 2 +- 4 files changed, 7 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/include/mach/reset.h index 31e6a7b6ad80..b6c10556fbc7 100644 --- a/arch/arm/mach-pxa/include/mach/reset.h +++ b/arch/arm/mach-pxa/include/mach/reset.h @@ -13,8 +13,9 @@ extern void clear_reset_status(unsigned int mask); /** * init_gpio_reset() - register GPIO as reset generator * @gpio: gpio nr - * @output: set gpio as out/low instead of input during normal work + * @output: set gpio as output instead of input during normal work + * @level: output level */ -extern int init_gpio_reset(int gpio, int output); +extern int init_gpio_reset(int gpio, int output, int level); #endif /* __ASM_ARCH_RESET_H */ diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c index df29d45fb4e7..01e9d643394a 100644 --- a/arch/arm/mach-pxa/reset.c +++ b/arch/arm/mach-pxa/reset.c @@ -20,7 +20,7 @@ static void do_hw_reset(void); static int reset_gpio = -1; -int init_gpio_reset(int gpio, int output) +int init_gpio_reset(int gpio, int output, int level) { int rc; @@ -31,7 +31,7 @@ int init_gpio_reset(int gpio, int output) } if (output) - rc = gpio_direction_output(gpio, 0); + rc = gpio_direction_output(gpio, level); else rc = gpio_direction_input(gpio); if (rc) { diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index c18e34acafcb..cdacea09abfa 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -731,7 +731,7 @@ static void spitz_restart(char mode, const char *cmd) static void __init common_init(void) { - init_gpio_reset(SPITZ_GPIO_ON_RESET, 1); + init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0); pm_power_off = spitz_poweroff; arm_pm_restart = spitz_restart; diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index afac5b6d3d78..a0bd46ef5d30 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -897,7 +897,7 @@ static void __init tosa_init(void) gpio_set_wake(MFP_PIN_GPIO1, 1); /* We can't pass to gpio-keys since it will drop the Reset altfunc */ - init_gpio_reset(TOSA_GPIO_ON_RESET, 0); + init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0); pm_power_off = tosa_poweroff; arm_pm_restart = tosa_restart; -- cgit v1.2.2 From 866bd435819df8d97767c407f8828a7a2ff971e6 Mon Sep 17 00:00:00 2001 From: Timothy Clacy Date: Thu, 7 May 2009 19:40:33 +0200 Subject: [ARM] pxa: enable GPIO receivers after configuring pins 'mach-pxa' platforms currently rely on a bootloader to setup GPIO pins and clear RDH (to enable inputs). A kernel loaded by a 'minimal' bootloader, that doesn't touch any pins, will not function correctly; inputs will remain disabled, even after the pins are configured. The following change fixes the issue and has been verified on Gumstix Verdex XL6P and a custom PXA270 platform. Signed-off-by: Timothy Clacy Signed-off-by: Eric Miao --- arch/arm/mach-pxa/mfp-pxa2xx.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index 6ae50604170d..cf6b720c055f 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -377,6 +377,9 @@ static int __init pxa2xx_mfp_init(void) if (cpu_is_pxa27x()) pxa27x_mfp_init(); + /* clear RDH bit to enable GPIO receivers after reset/sleep exit */ + PSSR = PSSR_RDH; + /* initialize gafr_run[], pgsr_lpm[] from existing values */ for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) gpdr_lpm[i] = GPDR(i * 32); -- cgit v1.2.2 From a81b38688f50f51123490d45d51f4a10e8dc1184 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Fri, 15 May 2009 10:11:22 +0400 Subject: [ARM] pxa/spitz: provide spitz_ohci_exit() that unregisters USB_HOST GPIO Currently spitz_ohci_init() that requests GPIO doesn't have corresponding spitz_ohci_exit() which will gpio_free(). This causes minor problems e.g. during resume when the OHCI device can't be resumed. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Eric Miao --- arch/arm/mach-pxa/spitz.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index cdacea09abfa..5a45fe340a10 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -531,9 +531,15 @@ static int spitz_ohci_init(struct device *dev) return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1); } +static void spitz_ohci_exit(struct device *dev) +{ + gpio_free(SPITZ_GPIO_USB_HOST); +} + static struct pxaohci_platform_data spitz_ohci_platform_data = { .port_mode = PMM_NPS_MODE, .init = spitz_ohci_init, + .exit = spitz_ohci_exit, .flags = ENABLE_PORT_ALL | NO_OC_PROTECTION, .power_budget = 150, }; -- cgit v1.2.2 From 982db66352d31892f624390cfb64a1cea5df765a Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Mon, 18 May 2009 17:29:30 +0100 Subject: [ARM] 5518/1: versatile: don't put clock lookups in __initdata Remove the __initdata annotation for the clock lookups, since they will be needed when loading modules which use clk_get(). Signed-off-by: Rabin Vincent Signed-off-by: Russell King --- arch/arm/mach-versatile/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 1f929c391af7..b3bebcc5623b 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -413,7 +413,7 @@ static struct clk ref24_clk = { .rate = 24000000, }; -static struct clk_lookup lookups[] __initdata = { +static struct clk_lookup lookups[] = { { /* UART0 */ .dev_id = "dev:f1", .clk = &ref24_clk, -- cgit v1.2.2 From a93ea9b357a4d4fce9a1f65bf9c152fb67c30716 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Mon, 18 May 2009 17:26:08 +0100 Subject: [ARM] 5517/1: integrator: don't put clock lookups in __initdata Remove the __initdata annotation for the clock lookups, since they will be needed when loading modules which use clk_get(). Signed-off-by: Rabin Vincent Signed-off-by: Russell King --- arch/arm/mach-integrator/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 6f8872913073..a0f60e55da6a 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -121,7 +121,7 @@ static struct clk uartclk = { .rate = 14745600, }; -static struct clk_lookup lookups[] __initdata = { +static struct clk_lookup lookups[] = { { /* UART0 */ .dev_id = "mb:16", .clk = &uartclk, -- cgit v1.2.2 From ff71338ed31398384b2e5992623d52f9aaba1da1 Mon Sep 17 00:00:00 2001 From: Daniel Ribeiro Date: Fri, 15 May 2009 06:33:50 -0300 Subject: [ARM] pxa/ezx: fix pin configuration for low power mode Fix LPM configuration on ezx.c Signed-off-by: Daniel Ribeiro Signed-off-by: Eric Miao --- arch/arm/mach-pxa/ezx.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index 92ba16e1b6fc..7db966dc29ce 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -111,9 +111,9 @@ static unsigned long ezx_pin_config[] __initdata = { GPIO25_SSP1_TXD, GPIO26_SSP1_RXD, GPIO24_GPIO, /* pcap chip select */ - GPIO1_GPIO, /* pcap interrupt */ - GPIO4_GPIO, /* WDI_AP */ - GPIO55_GPIO, /* SYS_RESTART */ + GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* pcap interrupt */ + GPIO4_GPIO | MFP_LPM_DRIVE_HIGH, /* WDI_AP */ + GPIO55_GPIO | MFP_LPM_DRIVE_HIGH, /* SYS_RESTART */ /* MMC */ GPIO32_MMC_CLK, @@ -144,20 +144,20 @@ static unsigned long ezx_pin_config[] __initdata = { #if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680) static unsigned long gen1_pin_config[] __initdata = { /* flip / lockswitch */ - GPIO12_GPIO, + GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH, /* bluetooth (bcm2035) */ - GPIO14_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */ + GPIO14_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */ GPIO48_GPIO, /* RESET */ GPIO28_GPIO, /* WAKEUP */ /* Neptune handshake */ - GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */ - GPIO57_GPIO, /* AP_RDY */ - GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */ - GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI2 */ - GPIO82_GPIO, /* RESET */ - GPIO99_GPIO, /* TC_MM_EN */ + GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */ + GPIO57_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */ + GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI */ + GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI2 */ + GPIO82_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */ + GPIO99_GPIO | MFP_LPM_DRIVE_HIGH, /* TC_MM_EN */ /* sound */ GPIO52_SSP3_SCLK, @@ -199,21 +199,21 @@ static unsigned long gen1_pin_config[] __initdata = { defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6) static unsigned long gen2_pin_config[] __initdata = { /* flip / lockswitch */ - GPIO15_GPIO, + GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH, /* EOC */ - GPIO10_GPIO, + GPIO10_GPIO | WAKEUP_ON_EDGE_RISE, /* bluetooth (bcm2045) */ - GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */ + GPIO13_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */ GPIO37_GPIO, /* RESET */ GPIO57_GPIO, /* WAKEUP */ /* Neptune handshake */ - GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */ - GPIO96_GPIO, /* AP_RDY */ - GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */ - GPIO116_GPIO, /* RESET */ + GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */ + GPIO96_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */ + GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* WDI */ + GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */ GPIO41_GPIO, /* BP_FLASH */ /* sound */ -- cgit v1.2.2 From 950312ce22696ddfa42a957bdadaa9c24151e679 Mon Sep 17 00:00:00 2001 From: Andrew Randrianasulu Date: Thu, 14 May 2009 11:29:27 -0700 Subject: MIPS: IP32: Fix hang on shutdown in power button interrupt handler. The hang was caused by the use of disable_irq() from the interrupt handler itself. Fixed by the use of disable_irq_nosync(). The issue was triggered by: commit 3aa551c9b4c40018f0e261a178e3d25478dc04a9 Author: Thomas Gleixner Date: Mon Mar 23 18:28:15 2009 +0100 genirq: add threaded interrupt handler support Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip32/ip32-reset.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/sgi-ip32/ip32-reset.c b/arch/mips/sgi-ip32/ip32-reset.c index b6cab089561e..667da932b7b2 100644 --- a/arch/mips/sgi-ip32/ip32-reset.c +++ b/arch/mips/sgi-ip32/ip32-reset.c @@ -145,7 +145,7 @@ static irqreturn_t ip32_rtc_int(int irq, void *dev_id) "%s: RTC IRQ without RTC_IRQF\n", __func__); } /* Wait until interrupt goes away */ - disable_irq(MACEISA_RTC_IRQ); + disable_irq_nosync(MACEISA_RTC_IRQ); init_timer(&debounce_timer); debounce_timer.function = debounce; debounce_timer.expires = jiffies + 50; -- cgit v1.2.2 From 7e9e05cad94217498e4d9bd6ef7137b4e9e7ed64 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 16 May 2009 12:23:45 +0100 Subject: MIPS: IP22: Fix hang in power button interrupt handler The hang was caused by the use of disable_irq() from the interrupt handler itself. Fixed by the use of disable_irq_nosync(). The issue was triggered by: commit 3aa551c9b4c40018f0e261a178e3d25478dc04a9 Author: Thomas Gleixner Date: Mon Mar 23 18:28:15 2009 +0100 genirq: add threaded interrupt handler support Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip22/ip22-reset.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/sgi-ip22/ip22-reset.c b/arch/mips/sgi-ip22/ip22-reset.c index 4ad5c3393fd3..45b6694c2079 100644 --- a/arch/mips/sgi-ip22/ip22-reset.c +++ b/arch/mips/sgi-ip22/ip22-reset.c @@ -148,7 +148,7 @@ static irqreturn_t panel_int(int irq, void *dev_id) if (sgint->istat1 & SGINT_ISTAT1_PWR) { /* Wait until interrupt goes away */ - disable_irq(SGI_PANEL_IRQ); + disable_irq_nosync(SGI_PANEL_IRQ); init_timer(&debounce_timer); debounce_timer.function = debounce; debounce_timer.expires = jiffies + 5; -- cgit v1.2.2 From 195d1a96ae5fdfbedb8dc4b97afee578921fa99e Mon Sep 17 00:00:00 2001 From: peter fuerst Date: Sun, 17 May 2009 23:49:45 +0200 Subject: MIPS: IP28: Change to build with -mr10k-cache-barrier=store Richard Sandiford's new code for inserting the cache-barriers, for GCC 4.3 and above and already incorporated in the current GCC-release, uses a slightly different option-syntax. Signed-off-by: peter fuerst Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 26947ab85260..c4cae9e6b802 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -473,12 +473,12 @@ endif # Simplified: what IP22 does at 128MB+ in ksegN, IP28 does at 512MB+ in xkphys # ifdef CONFIG_SGI_IP28 - ifeq ($(call cc-option-yn,-mr10k-cache-barrier=1), n) - $(error gcc doesn't support needed option -mr10k-cache-barrier=1) + ifeq ($(call cc-option-yn,-mr10k-cache-barrier=store), n) + $(error gcc doesn't support needed option -mr10k-cache-barrier=store) endif endif core-$(CONFIG_SGI_IP28) += arch/mips/sgi-ip22/ -cflags-$(CONFIG_SGI_IP28) += -mr10k-cache-barrier=1 -I$(srctree)/arch/mips/include/asm/mach-ip28 +cflags-$(CONFIG_SGI_IP28) += -mr10k-cache-barrier=store -I$(srctree)/arch/mips/include/asm/mach-ip28 load-$(CONFIG_SGI_IP28) += 0xa800000020004000 # -- cgit v1.2.2 From a5e696e5d0f1377ff6beb10d2f40edb6a3d1de18 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 20 May 2009 16:12:32 +1000 Subject: MIPS: 64-bit: Fix system lockup. The address range size calculation inside local_flush_tlb_kernel_range() is being truncated by a too small size variable holder on 64-bit systems. The truncated size can result in an erroneous tlbsize check that means we sit spinning inside a loop trying to flush a hige number of TLB entries. This is for all intents and purposes a system hang. Fix by using an appropriately sized valiable to hold the size. [Ralf: Greg's original patch submission identified the issue and fixed one instance in tlb-r4k.c but there there were several more. For consistency I also modified tlb-r3k.c even though that file is only used on 32-bit.] Signed-off-by: Greg Ungerer Signed-off-by: Ralf Baechle --- arch/mips/mm/tlb-r3k.c | 6 ++---- arch/mips/mm/tlb-r4k.c | 6 ++---- arch/mips/mm/tlb-r8k.c | 3 +-- 3 files changed, 5 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c index f0cf46adb978..1c0048a6f5cf 100644 --- a/arch/mips/mm/tlb-r3k.c +++ b/arch/mips/mm/tlb-r3k.c @@ -82,8 +82,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, int cpu = smp_processor_id(); if (cpu_context(cpu, mm) != 0) { - unsigned long flags; - int size; + unsigned long size, flags; #ifdef DEBUG_TLB printk("[tlbrange<%lu,0x%08lx,0x%08lx>]", @@ -121,8 +120,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) { - unsigned long flags; - int size; + unsigned long size, flags; #ifdef DEBUG_TLB printk("[tlbrange<%lu,0x%08lx,0x%08lx>]", start, end); diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index 9619f66e531e..892be426787c 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -117,8 +117,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, int cpu = smp_processor_id(); if (cpu_context(cpu, mm) != 0) { - unsigned long flags; - int size; + unsigned long size, flags; ENTER_CRITICAL(flags); size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; @@ -160,8 +159,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) { - unsigned long flags; - int size; + unsigned long size, flags; ENTER_CRITICAL(flags); size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; diff --git a/arch/mips/mm/tlb-r8k.c b/arch/mips/mm/tlb-r8k.c index 4f01a3be215c..4ec95cc2df2f 100644 --- a/arch/mips/mm/tlb-r8k.c +++ b/arch/mips/mm/tlb-r8k.c @@ -111,8 +111,7 @@ out_restore: /* Usable for KV1 addresses only! */ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) { - unsigned long flags; - int size; + unsigned long size, flags; size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; size = (size + 1) >> 1; -- cgit v1.2.2 From 385aa9e7012d35b017981e67b3464aef4e1e7108 Mon Sep 17 00:00:00 2001 From: Thomas Reitmayr Date: Tue, 19 May 2009 19:35:26 +0200 Subject: [ARM] Kirkwood: Correct MPP for SATA activity/presence LEDs of QNAP TS-119/TS-219. For the QNAP TS-119 and TS-219 the wrong MPPs were used for the SATA activity/presence LEDs. The new settings make these LEDs work as expected. Signed-off-by: Thomas Reitmayr Tested-by: Martin Michlmayr Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/ts219-setup.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index dda5743cf3e0..01aa213c0a6f 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -142,6 +142,8 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = { MPP1_SPI_MOSI, MPP2_SPI_SCK, MPP3_SPI_MISO, + MPP4_SATA1_ACTn, + MPP5_SATA0_ACTn, MPP8_TW_SDA, MPP9_TW_SCK, MPP10_UART0_TXD, @@ -150,10 +152,6 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = { MPP14_UART1_RXD, /* PIC controller */ MPP15_GPIO, /* USB Copy button */ MPP16_GPIO, /* Reset button */ - MPP20_SATA1_ACTn, - MPP21_SATA0_ACTn, - MPP22_SATA1_PRESENTn, - MPP23_SATA0_PRESENTn, 0 }; -- cgit v1.2.2 From 85bc26211c6a2c6e82c2403697f8ce44e9587215 Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Tue, 19 May 2009 12:30:52 +0200 Subject: [ARM] Orion: Remove explicit name for platform device resources Remove explicit names from platform device resources since they will automatically be named after the platform device they're associated with. Signed-off-by: Martin Michlmayr Acked-by: Russell King Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/common.c | 2 -- arch/arm/mach-mv78xx0/common.c | 4 ---- arch/arm/mach-orion5x/common.c | 2 -- 3 files changed, 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index eeb00240d784..3fab82a4c8fc 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -386,12 +386,10 @@ static struct mv64xxx_i2c_pdata kirkwood_i2c_pdata = { static struct resource kirkwood_i2c_resources[] = { { - .name = "i2c", .start = I2C_PHYS_BASE, .end = I2C_PHYS_BASE + 0x1f, .flags = IORESOURCE_MEM, }, { - .name = "i2c", .start = IRQ_KIRKWOOD_TWSI, .end = IRQ_KIRKWOOD_TWSI, .flags = IORESOURCE_IRQ, diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 9ba595083dab..0d88eea6a09c 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -532,12 +532,10 @@ static struct mv64xxx_i2c_pdata mv78xx0_i2c_0_pdata = { static struct resource mv78xx0_i2c_0_resources[] = { { - .name = "i2c 0 base", .start = I2C_0_PHYS_BASE, .end = I2C_0_PHYS_BASE + 0x1f, .flags = IORESOURCE_MEM, }, { - .name = "i2c 0 irq", .start = IRQ_MV78XX0_I2C_0, .end = IRQ_MV78XX0_I2C_0, .flags = IORESOURCE_IRQ, @@ -567,12 +565,10 @@ static struct mv64xxx_i2c_pdata mv78xx0_i2c_1_pdata = { static struct resource mv78xx0_i2c_1_resources[] = { { - .name = "i2c 1 base", .start = I2C_1_PHYS_BASE, .end = I2C_1_PHYS_BASE + 0x1f, .flags = IORESOURCE_MEM, }, { - .name = "i2c 1 irq", .start = IRQ_MV78XX0_I2C_1, .end = IRQ_MV78XX0_I2C_1, .flags = IORESOURCE_IRQ, diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 6af99ddabdfb..a51fb9dd65a7 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -248,12 +248,10 @@ static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = { static struct resource orion5x_i2c_resources[] = { { - .name = "i2c base", .start = I2C_PHYS_BASE, .end = I2C_PHYS_BASE + 0x1f, .flags = IORESOURCE_MEM, }, { - .name = "i2c irq", .start = IRQ_ORION5X_I2C, .end = IRQ_ORION5X_I2C, .flags = IORESOURCE_IRQ, -- cgit v1.2.2 From 37869fa2da1a952ed736858f8b9e45c0b9131ae9 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 20 May 2009 14:30:06 +0000 Subject: sh: ap325 camera without i2c driver fix This patch fixes the ap325rxa ncm03j camera code to handle the case where no i2c driver is present. Without this fix i2c_transfer() may be passed NULL as adapter which results in a crash. Triggered when i2c-sh_mobile.c failed to probe() due to missing MSTP clocks. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/board-ap325rxa.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c index 39e46919df14..f2a29641b6a3 100644 --- a/arch/sh/boards/board-ap325rxa.c +++ b/arch/sh/boards/board-ap325rxa.c @@ -263,6 +263,9 @@ static int camera_probe(void) struct i2c_msg msg; int ret; + if (!a) + return -ENODEV; + camera_power(1); msg.addr = 0x6e; msg.buf = camera_ncm03j_magic; -- cgit v1.2.2 From 6eb0ac03899a1363ba176abe0830a9e6698c0503 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 21 May 2009 19:10:23 +0000 Subject: powerpc/maple: Add a quirk to disable MSI for IPR on Bimini Something in the HW or FW setup is busted and MSIs aren't working with IPR on Bimini, so until we figure out exaxtly what's up, we quirk them out Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/maple/pci.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index 301855263b81..04296ffff8bf 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -592,3 +592,17 @@ int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel) } return irq; } + +static void __devinit quirk_ipr_msi(struct pci_dev *dev) +{ + /* Something prevents MSIs from the IPR from working on Bimini, + * and the driver has no smarts to recover. So disable MSI + * on it for now. */ + + if (machine_is(maple)) { + dev->no_msi = 1; + dev_info(&dev->dev, "Quirk disabled MSI\n"); + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN, + quirk_ipr_msi); -- cgit v1.2.2 From 88dff4936c0a5fa53080cca68dc963a8a2a674b0 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 22 May 2009 11:35:50 +0800 Subject: x86: DMI match for the Sony VGN-Z540N as it needs BIOS reboot x86: DMI match for the Sony VGN-Z540N as it needs BIOS reboot, see: http://bugzilla.kernel.org/show_bug.cgi?id=12901 [ Impact: fix hung reboot on certain systems ] Signed-off-by: Zhang Rui Cc: Len Brown LKML-Reference: <1242963350.32574.53.camel@rzhang-dt> Signed-off-by: Ingo Molnar --- arch/x86/kernel/reboot.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 1340dad417f4..667188e0b5a0 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -232,6 +232,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Dell DXP061"), }, }, + { /* Handle problems with rebooting on Sony VGN-Z540N */ + .callback = set_bios_reboot, + .ident = "Sony VGN-Z540N", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-Z540N"), + }, + }, { } }; -- cgit v1.2.2 From 0e1b74df992c1ef92213ab26f952befda2087f59 Mon Sep 17 00:00:00 2001 From: Mingwei Wang Date: Wed, 20 May 2009 16:49:57 +0800 Subject: [ARM] pxa: fix the incorrectly defined drive strength macros for pxa{168,910} Signed-off-by: Mingwei Wang Signed-off-by: Eric Miao --- arch/arm/mach-mmp/include/mach/mfp-pxa168.h | 5 +++++ arch/arm/mach-mmp/include/mach/mfp-pxa910.h | 5 +++++ arch/arm/mach-mmp/include/mach/mfp.h | 9 +++------ 3 files changed, 13 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h index d0bdb6e3682b..2e914649b9e4 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h @@ -3,6 +3,11 @@ #include +#define MFP_DRIVE_VERY_SLOW (0x0 << 13) +#define MFP_DRIVE_SLOW (0x1 << 13) +#define MFP_DRIVE_MEDIUM (0x2 << 13) +#define MFP_DRIVE_FAST (0x3 << 13) + /* GPIO */ #define GPIO0_GPIO MFP_CFG(GPIO0, AF5) #define GPIO1_GPIO MFP_CFG(GPIO1, AF5) diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h index 48a1cbc7c56b..d97de36c50ad 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h @@ -3,6 +3,11 @@ #include +#define MFP_DRIVE_VERY_SLOW (0x0 << 13) +#define MFP_DRIVE_SLOW (0x2 << 13) +#define MFP_DRIVE_MEDIUM (0x4 << 13) +#define MFP_DRIVE_FAST (0x8 << 13) + /* UART2 */ #define GPIO47_UART2_RXD MFP_CFG(GPIO47, AF6) #define GPIO48_UART2_TXD MFP_CFG(GPIO48, AF6) diff --git a/arch/arm/mach-mmp/include/mach/mfp.h b/arch/arm/mach-mmp/include/mach/mfp.h index 277ea4cd0f9f..62e510e80a58 100644 --- a/arch/arm/mach-mmp/include/mach/mfp.h +++ b/arch/arm/mach-mmp/include/mach/mfp.h @@ -12,16 +12,13 @@ * possible, we make the following compromise: * * 1. SLEEP_OE_N will always be programmed to '1' (by MFP_LPM_FLOAT) - * 2. DRIVE strength definitions redefined to include the reserved bit10 + * 2. DRIVE strength definitions redefined to include the reserved bit + * - the reserved bit differs between pxa168 and pxa910, and the + * MFP_DRIVE_* macros are individually defined in mfp-pxa{168,910}.h * 3. Override MFP_CFG() and MFP_CFG_DRV() * 4. Drop the use of MFP_CFG_LPM() and MFP_CFG_X() */ -#define MFP_DRIVE_VERY_SLOW (0x0 << 13) -#define MFP_DRIVE_SLOW (0x2 << 13) -#define MFP_DRIVE_MEDIUM (0x4 << 13) -#define MFP_DRIVE_FAST (0x8 << 13) - #undef MFP_CFG #undef MFP_CFG_DRV #undef MFP_CFG_LPM -- cgit v1.2.2 From f5c81a327015844eb91087dd102648b5d984f33c Mon Sep 17 00:00:00 2001 From: Coly Li Date: Thu, 23 Apr 2009 03:04:45 +0800 Subject: [ARM] pxa: add parameter to clksrc_read() for pxa168/910 This patch modifies parameter of clksrc_read() from 'void' to 'struct clocksource *cs', which fixes compile warning for incompatible parameter type. Signed-off-by: Coly Li Cc: Thomas Gleixner Signed-off-by: Eric Miao --- arch/arm/mach-mmp/time.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index b03a6eda7419..a8400bb891e7 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -136,7 +136,7 @@ static struct clock_event_device ckevt = { .set_mode = timer_set_mode, }; -static cycle_t clksrc_read(void) +static cycle_t clksrc_read(struct clocksource *cs) { return timer_read(); } -- cgit v1.2.2 From 6ec04f434d29aed33608e0ca4d8b100190e71e96 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 22 May 2009 01:39:10 +0200 Subject: [ARM] pxa/palm: fix PalmLD/T5/TX AC97 MFP Signed-off-by: Marek Vasut Signed-off-by: Eric Miao --- arch/arm/mach-pxa/palmld.c | 2 ++ arch/arm/mach-pxa/palmt5.c | 1 + arch/arm/mach-pxa/palmtx.c | 1 + 3 files changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index 1cec1806f002..471a853e548b 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -62,6 +62,8 @@ static unsigned long palmld_pin_config[] __initdata = { GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, + GPIO89_AC97_SYSCLK, + GPIO95_AC97_nRESET, /* IrDA */ GPIO108_GPIO, /* ir disable */ diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 30662363907b..05bf979b78a6 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -64,6 +64,7 @@ static unsigned long palmt5_pin_config[] __initdata = { GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, + GPIO89_AC97_SYSCLK, GPIO95_AC97_nRESET, /* IrDA */ diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index e2d44b1a8a9b..e99a893c58a7 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -65,6 +65,7 @@ static unsigned long palmtx_pin_config[] __initdata = { GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, + GPIO89_AC97_SYSCLK, GPIO95_AC97_nRESET, /* IrDA */ -- cgit v1.2.2 From 63d3892379f93b73ef905fb3449f4e4438a53b40 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Thu, 21 May 2009 05:50:01 +0800 Subject: MIPS: Fix sparse warning in incompatiable argument type of clear_user. The type of the second argument of access_ok should be (void __user *). The unnecessary conversion of the clear_user address argument was causing sparse to emit warnings on the __chk_user_ptr check. Signed-off-by: Wu Zhangjin Signed-off-by: Ralf Baechle --- arch/mips/include/asm/uaccess.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h index 8de858f5449f..c2d53c18fd36 100644 --- a/arch/mips/include/asm/uaccess.h +++ b/arch/mips/include/asm/uaccess.h @@ -956,7 +956,7 @@ __clear_user(void __user *addr, __kernel_size_t size) void __user * __cl_addr = (addr); \ unsigned long __cl_size = (n); \ if (__cl_size && access_ok(VERIFY_WRITE, \ - ((unsigned long)(__cl_addr)), __cl_size)) \ + __cl_addr, __cl_size)) \ __cl_size = __clear_user(__cl_addr, __cl_size); \ __cl_size; \ }) -- cgit v1.2.2 From 63c901c7e6fb878805cd2f8f14fa3eee8c03ee84 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 22 May 2009 10:48:17 +0100 Subject: MIPS: IP32: Fix build error due to uninitialized variable. CC arch/mips/sgi-ip32/ip32-reset.o cc1: warnings being treated as errors arch/mips/sgi-ip32/ip32-reset.c: In function 'debounce': arch/mips/sgi-ip32/ip32-reset.c:97: error: 'reg_a' is used uninitialized in this function The issues is old but due to the volatile keyword gcc older than 4.4 did not warn about this obvious bug. Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip32/ip32-reset.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/mips/sgi-ip32/ip32-reset.c b/arch/mips/sgi-ip32/ip32-reset.c index 667da932b7b2..cc549a9a99e8 100644 --- a/arch/mips/sgi-ip32/ip32-reset.c +++ b/arch/mips/sgi-ip32/ip32-reset.c @@ -94,6 +94,7 @@ static void debounce(unsigned long data) volatile unsigned char reg_a, reg_c, xctrl_a; reg_c = CMOS_READ(RTC_INTR_FLAGS); + reg_a = CMOS_READ(RTC_REG_A); CMOS_WRITE(reg_a | DS_REGA_DV0, RTC_REG_A); wbflush(); xctrl_a = CMOS_READ(DS_B1_XCTRL4A); -- cgit v1.2.2 From d2f82c2f70d56ba4623de25edb383fec01f43b89 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 22 May 2009 10:58:43 +0100 Subject: MIPS: IP32: Remove unnecessary if not even harmful volatile keywords. They are unneeded and as the issue fixed in lmo commit 63f7ec59053e3f850ab67a9938e631bcba64c6ce shows even harmful. Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip32/ip32-reset.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/mips/sgi-ip32/ip32-reset.c b/arch/mips/sgi-ip32/ip32-reset.c index cc549a9a99e8..9b95d80ebc6e 100644 --- a/arch/mips/sgi-ip32/ip32-reset.c +++ b/arch/mips/sgi-ip32/ip32-reset.c @@ -53,7 +53,7 @@ static inline void ip32_machine_halt(void) static void ip32_machine_power_off(void) { - volatile unsigned char reg_a, xctrl_a, xctrl_b; + unsigned char reg_a, xctrl_a, xctrl_b; disable_irq(MACEISA_RTC_IRQ); reg_a = CMOS_READ(RTC_REG_A); @@ -91,7 +91,7 @@ static void blink_timeout(unsigned long data) static void debounce(unsigned long data) { - volatile unsigned char reg_a, reg_c, xctrl_a; + unsigned char reg_a, reg_c, xctrl_a; reg_c = CMOS_READ(RTC_INTR_FLAGS); reg_a = CMOS_READ(RTC_REG_A); @@ -138,7 +138,7 @@ static inline void ip32_power_button(void) static irqreturn_t ip32_rtc_int(int irq, void *dev_id) { - volatile unsigned char reg_c; + unsigned char reg_c; reg_c = CMOS_READ(RTC_INTR_FLAGS); if (!(reg_c & RTC_IRQF)) { -- cgit v1.2.2 From bca23dba760d6705c013f89113c46570378fb626 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Thu, 21 May 2009 11:46:16 -0700 Subject: x86, setup: revert ACPI 3 E820 extended attributes support Remove ACPI 3 E820 extended memory attributes support. At least one vendor actively set all the flags to zero, but left ECX on return at 24. This bug may be present in other BIOSes. The breakage functionally means the ACPI 3 flags are probably completely useless, and that no OS any time soon is going to rely on their existence. Therefore, drop support completely. We may want to revisit this question in the future, if we find ourselves actually needing the flags. This reverts all or part of the following checkins: cd670599b7b00d9263f6f11a05c0edeb9cbedaf3 c549e71d073a6e9a4847497344db28a784061455 However, retain the part from the latter commit that copies e820 into a temporary buffer; that is an unrelated BIOS workaround. Put in a comment to explain that part. See https://bugzilla.redhat.com/show_bug.cgi?id=499396 for some additional information. [ Impact: detect all memory on affected machines ] Reported-by: Thomas J. Baker Signed-off-by: H. Peter Anvin Acked-by: Len Brown Cc: Chuck Ebbert Cc: Kyle McMartin Cc: Matt Domsch --- arch/x86/boot/memory.c | 29 +++++++++++++---------------- 1 file changed, 13 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/x86/boot/memory.c b/arch/x86/boot/memory.c index 5054c2ddd1a0..74b3d2ba84e9 100644 --- a/arch/x86/boot/memory.c +++ b/arch/x86/boot/memory.c @@ -17,11 +17,6 @@ #define SMAP 0x534d4150 /* ASCII "SMAP" */ -struct e820_ext_entry { - struct e820entry std; - u32 ext_flags; -} __attribute__((packed)); - static int detect_memory_e820(void) { int count = 0; @@ -29,13 +24,21 @@ static int detect_memory_e820(void) u32 size, id, edi; u8 err; struct e820entry *desc = boot_params.e820_map; - static struct e820_ext_entry buf; /* static so it is zeroed */ + static struct e820entry buf; /* static so it is zeroed */ /* - * Set this here so that if the BIOS doesn't change this field - * but still doesn't change %ecx, we're still okay... + * Note: at least one BIOS is known which assumes that the + * buffer pointed to by one e820 call is the same one as + * the previous call, and only changes modified fields. Therefore, + * we use a temporary buffer and copy the results entry by entry. + * + * This routine deliberately does not try to account for + * ACPI 3+ extended attributes. This is because there are + * BIOSes in the field which report zero for the valid bit for + * all ranges, and we don't currently make any use of the + * other attribute bits. Revisit this if we see the extended + * attribute bits deployed in a meaningful way in the future. */ - buf.ext_flags = 1; do { size = sizeof buf; @@ -66,13 +69,7 @@ static int detect_memory_e820(void) break; } - /* ACPI 3.0 added the extended flags support. If bit 0 - in the extended flags is zero, we're supposed to simply - ignore the entry -- a backwards incompatible change! */ - if (size > 20 && !(buf.ext_flags & 1)) - continue; - - *desc++ = buf.std; + *desc++ = buf; count++; } while (next && count < ARRAY_SIZE(boot_params.e820_map)); -- cgit v1.2.2 From 0c752a93353d9b17dbe148312d732fbe06d235e1 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Fri, 22 May 2009 12:17:45 -0700 Subject: x86: introduce noxsave boot parameter Introduce "noxsave" boot parameter which will disable the cpu's xsave/xrstor capabilities. Useful for debugging and working around xsave related issues. [ Impact: make it possible to debug problems in the field ] Signed-off-by: Suresh Siddha Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/common.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index c1caefc82e62..77848d9fca68 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -114,6 +114,13 @@ DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = { } }; EXPORT_PER_CPU_SYMBOL_GPL(gdt_page); +static int __init x86_xsave_setup(char *s) +{ + setup_clear_cpu_cap(X86_FEATURE_XSAVE); + return 1; +} +__setup("noxsave", x86_xsave_setup); + #ifdef CONFIG_X86_32 static int cachesize_override __cpuinitdata = -1; static int disable_x86_serial_nr __cpuinitdata = 1; -- cgit v1.2.2 From 0b827537e339c084ac9384df588969d400be9e0d Mon Sep 17 00:00:00 2001 From: "venkatesh.pallipadi@intel.com" Date: Fri, 22 May 2009 13:23:37 -0700 Subject: x86: bugfix wbinvd() model check instead of family check wbinvd is supported on all CPUs 486 or later. But, pageattr.c is checking x86_model >= 4 before wbinvd(), which looks like an oversight bug. It was first introduced at one place by changeset d7c8f21a8cad0228c7c5ce2bb6dbd95d1ee49d13 and got copied over to second place in the same file later. [ Impact: fix missing cache flush on early-model CPUs, potential data corruption ] Signed-off-by: Venkatesh Pallipadi Signed-off-by: H. Peter Anvin --- arch/x86/mm/pageattr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 797f9f107cb6..2cc019a3f71b 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -153,7 +153,7 @@ static void __cpa_flush_all(void *arg) */ __flush_tlb_all(); - if (cache && boot_cpu_data.x86_model >= 4) + if (cache && boot_cpu_data.x86 >= 4) wbinvd(); } @@ -218,7 +218,7 @@ static void cpa_flush_array(unsigned long *start, int numpages, int cache, /* 4M threshold */ if (numpages >= 1024) { - if (boot_cpu_data.x86_model >= 4) + if (boot_cpu_data.x86 >= 4) wbinvd(); return; } -- cgit v1.2.2 From 0af48f42df15b97080b450d24219dd95db7b929a Mon Sep 17 00:00:00 2001 From: "venkatesh.pallipadi@intel.com" Date: Fri, 22 May 2009 13:23:38 -0700 Subject: x86: cpa_flush_array wbinvd should be done on all CPUs cpa_flush_array seems to prefer wbinvd() over clflush at 4M threshold. clflush needs to be done on only one CPU as per instruction definition. wbinvd() however, should be done on all CPUs. [ Impact: fix missing flush which could cause data corruption ] Signed-off-by: Venkatesh Pallipadi Signed-off-by: Suresh Siddha Signed-off-by: H. Peter Anvin --- arch/x86/mm/pageattr.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 2cc019a3f71b..0f9052bcec4b 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -204,6 +204,11 @@ static void cpa_flush_range(unsigned long start, int numpages, int cache) } } +static void wbinvd_local(void *unused) +{ + wbinvd(); +} + static void cpa_flush_array(unsigned long *start, int numpages, int cache, int in_flags, struct page **pages) { @@ -219,7 +224,8 @@ static void cpa_flush_array(unsigned long *start, int numpages, int cache, /* 4M threshold */ if (numpages >= 1024) { if (boot_cpu_data.x86 >= 4) - wbinvd(); + on_each_cpu(wbinvd_local, NULL, 1); + return; } /* -- cgit v1.2.2 From a49a018a6ea6d73742a81d673fe5ec4a7d2137b3 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Fri, 22 May 2009 16:53:40 -0400 Subject: [ARM] add coherent DMA mask for mv643xx_eth Since commit eb0519b5a1cf, mv643xx_eth is non functional on ARM because the platform device declaration does not include any coherent DMA mask and coherent memory allocations fail. Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/common.c | 6 ++++++ arch/arm/mach-loki/common.c | 6 ++++++ arch/arm/mach-mv78xx0/common.c | 12 ++++++++++++ arch/arm/mach-orion5x/common.c | 3 +++ 4 files changed, 27 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 3fab82a4c8fc..be1ca28fed3f 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -144,6 +144,9 @@ static struct platform_device kirkwood_ge00 = { .id = 0, .num_resources = 1, .resource = kirkwood_ge00_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) @@ -202,6 +205,9 @@ static struct platform_device kirkwood_ge01 = { .id = 1, .num_resources = 1, .resource = kirkwood_ge01_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) diff --git a/arch/arm/mach-loki/common.c b/arch/arm/mach-loki/common.c index c0d2d9d12e74..818f19d7ab1f 100644 --- a/arch/arm/mach-loki/common.c +++ b/arch/arm/mach-loki/common.c @@ -82,6 +82,9 @@ static struct platform_device loki_ge0 = { .id = 0, .num_resources = 1, .resource = loki_ge0_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init loki_ge0_init(struct mv643xx_eth_platform_data *eth_data) @@ -136,6 +139,9 @@ static struct platform_device loki_ge1 = { .id = 1, .num_resources = 1, .resource = loki_ge1_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init loki_ge1_init(struct mv643xx_eth_platform_data *eth_data) diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 0d88eea6a09c..1b22e4af8791 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -321,6 +321,9 @@ static struct platform_device mv78xx0_ge00 = { .id = 0, .num_resources = 1, .resource = mv78xx0_ge00_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data) @@ -375,6 +378,9 @@ static struct platform_device mv78xx0_ge01 = { .id = 1, .num_resources = 1, .resource = mv78xx0_ge01_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data) @@ -429,6 +435,9 @@ static struct platform_device mv78xx0_ge10 = { .id = 2, .num_resources = 1, .resource = mv78xx0_ge10_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data) @@ -496,6 +505,9 @@ static struct platform_device mv78xx0_ge11 = { .id = 3, .num_resources = 1, .resource = mv78xx0_ge11_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data) diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index a51fb9dd65a7..b1c7778d9f96 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -188,6 +188,9 @@ static struct platform_device orion5x_eth = { .id = 0, .num_resources = 1, .resource = orion5x_eth_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data) -- cgit v1.2.2 From 14f0aa359365e8a93a77b71e3b840274b9b4dcb1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 23 May 2009 11:36:20 +0100 Subject: [ARM] disable NX support for OABI-supporting kernels Our signal syscall restart handling for these kernels still uses the userspace stack to build code for restarting the syscall. Unfortunately, fixing this is non-trivial, and so for the time being, we resolve the problem by disabling NX support. Signed-off-by: Russell King --- arch/arm/kernel/elf.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c index d4a0da1e48f4..950391f194c4 100644 --- a/arch/arm/kernel/elf.c +++ b/arch/arm/kernel/elf.c @@ -78,6 +78,15 @@ int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack) return 1; if (cpu_architecture() < CPU_ARCH_ARMv6) return 1; +#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT) + /* + * If we have support for OABI programs, we can never allow NX + * support - our signal syscall restart mechanism relies upon + * being able to execute code placed on the user stack. + */ + return 1; +#else return 0; +#endif } EXPORT_SYMBOL(arm_elf_read_implies_exec); -- cgit v1.2.2 From 71c9d8b68b299bef614afc7907393564a9f1476f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 25 May 2009 12:01:59 +0900 Subject: x86: Remove remap percpu allocator for the time being Remap percpu allocator has subtle bug when combined with page attribute changing. Remap percpu allocator aliases PMD pages for the first chunk and as pageattr doesn't know about the alias it ends up updating page attributes of the original mapping thus leaving the alises in inconsistent state which might lead to subtle data corruption. Please read the following threads for more information: http://thread.gmane.org/gmane.linux.kernel/835783 The following is the proposed fix which teaches pageattr about percpu aliases. http://thread.gmane.org/gmane.linux.kernel/837157 However, the above changes are deemed too pervasive for upstream inclusion for 2.6.30 release, so this patch essentially disables the remap allocator for the time being. Signed-off-by: Tejun Heo LKML-Reference: <4A1A0A27.4050301@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/setup_percpu.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index 3a97a4cf1872..8f0e13be36b3 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -160,8 +160,10 @@ static ssize_t __init setup_pcpu_remap(size_t static_size) /* * If large page isn't supported, there's no benefit in doing * this. Also, on non-NUMA, embedding is better. + * + * NOTE: disabled for now. */ - if (!cpu_has_pse || !pcpu_need_numa()) + if (true || !cpu_has_pse || !pcpu_need_numa()) return -EINVAL; /* -- cgit v1.2.2 From a8cd0244e9cebcf9b358d24c7e7410062f3665cb Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Sun, 24 May 2009 22:15:25 +0300 Subject: KVM: Make paravirt tlb flush also reload the PAE PDPTRs The paravirt tlb flush may be used not only to flush TLBs, but also to reload the four page-directory-pointer-table entries, as it is used as a replacement for reloading CR3. Change the code to do the entire CR3 reloading dance instead of simply flushing the TLB. Cc: stable@kernel.org Signed-off-by: Avi Kivity --- arch/x86/kvm/mmu.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index b6caf1329b1b..32cf11e5728a 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -2897,8 +2897,7 @@ static int kvm_pv_mmu_write(struct kvm_vcpu *vcpu, static int kvm_pv_mmu_flush_tlb(struct kvm_vcpu *vcpu) { - kvm_x86_ops->tlb_flush(vcpu); - set_bit(KVM_REQ_MMU_SYNC, &vcpu->requests); + kvm_set_cr3(vcpu, vcpu->arch.cr3); return 1; } -- cgit v1.2.2 From a2edf57f510cce6a389cc14e58c6ad0a4296d6f9 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Sun, 24 May 2009 22:19:00 +0300 Subject: KVM: Fix PDPTR reloading on CR4 writes The processor is documented to reload the PDPTRs while in PAE mode if any of the CR4 bits PSE, PGE, or PAE change. Linux relies on this behaviour when zapping the low mappings of PAE kernels during boot. The code already handled changes to CR4.PAE; augment it to also notice changes to PSE and PGE. This triggered while booting an F11 PAE kernel; the futex initialization code runs before any CR3 reloads and writes to a NULL pointer; the futex subsystem ended up uninitialized, killing PI futexes and pulseaudio which uses them. Cc: stable@kernel.org Signed-off-by: Avi Kivity --- arch/x86/kvm/x86.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 49079a46687b..3944e917e794 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -338,6 +338,9 @@ EXPORT_SYMBOL_GPL(kvm_lmsw); void kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4) { + unsigned long old_cr4 = vcpu->arch.cr4; + unsigned long pdptr_bits = X86_CR4_PGE | X86_CR4_PSE | X86_CR4_PAE; + if (cr4 & CR4_RESERVED_BITS) { printk(KERN_DEBUG "set_cr4: #GP, reserved bits\n"); kvm_inject_gp(vcpu, 0); @@ -351,7 +354,8 @@ void kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4) kvm_inject_gp(vcpu, 0); return; } - } else if (is_paging(vcpu) && !is_pae(vcpu) && (cr4 & X86_CR4_PAE) + } else if (is_paging(vcpu) && (cr4 & X86_CR4_PAE) + && ((cr4 ^ old_cr4) & pdptr_bits) && !load_pdptrs(vcpu, vcpu->arch.cr3)) { printk(KERN_DEBUG "set_cr4: #GP, pdptrs reserved bits\n"); kvm_inject_gp(vcpu, 0); -- cgit v1.2.2 From 8e35961b57da14cb64cb0e4e1b7e3aabda6396fe Mon Sep 17 00:00:00 2001 From: Hideo Saito Date: Sun, 24 May 2009 15:33:34 +0000 Subject: powerpc/mm: Fix broken MMU PID stealing on !SMP The recent rework of the MMU PID handling for non-hash CPUs has a subtle bug in the !SMP "optimized" variant of the PID stealing function. It clears the PID in the mm context before it calls local_flush_tlb_mm(). However, the later will not flush anything if the PID in the context is clear... Signed-off-by: Hideo Saito Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/mmu_context_nohash.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c index a70e311bd457..030d0005b4d2 100644 --- a/arch/powerpc/mm/mmu_context_nohash.c +++ b/arch/powerpc/mm/mmu_context_nohash.c @@ -127,12 +127,12 @@ static unsigned int steal_context_up(unsigned int id) pr_debug("[%d] steal context %d from mm @%p\n", cpu, id, mm); - /* Mark this mm has having no context anymore */ - mm->context.id = MMU_NO_CONTEXT; - /* Flush the TLB for that context */ local_flush_tlb_mm(mm); + /* Mark this mm has having no context anymore */ + mm->context.id = MMU_NO_CONTEXT; + /* XXX This clear should ultimately be part of local_flush_tlb_mm */ __clear_bit(id, stale_map[cpu]); -- cgit v1.2.2 From 46176b4f6bac19454b7b5c35f68594b85850a600 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 26 May 2009 14:42:40 +0900 Subject: x86, relocs: ignore R_386_NONE in kernel relocation entries For relocatable 32bit kernels, boot/compressed/relocs.c processes relocation entries in the kernel image and appends it to the kernel image such that boot/compressed/head_32.S can relocate the kernel. The kernel image is one statically linked object and only uses two relocation types - R_386_PC32 and R_386_32, of the two only the latter needs massaging during kernel relocation and thus handled by relocs. R_386_PC32 is ignored and all other relocation types are considered error. When the target of a relocation resides in a discarded section, binutils doesn't throw away the relocation record but nullifies it by changing it to R_386_NONE, which unfortunately makes relocs fail. The problem was triggered by yet out-of-tree x86 stack unwind patches but given the binutils behavior, ignoring R_386_NONE is the right thing to do. The problem has been tracked down to binutils behavior by Jan Beulich. [ Impact: fix build with certain binutils by ignoring R_386_NONE ] Signed-off-by: Tejun Heo Cc: Jan Beulich Cc: Ingo Molnar LKML-Reference: <4A1B8150.40702@kernel.org> Signed-off-by: H. Peter Anvin --- arch/x86/boot/compressed/relocs.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/boot/compressed/relocs.c b/arch/x86/boot/compressed/relocs.c index 857e492c571e..bbeb0c3fbd90 100644 --- a/arch/x86/boot/compressed/relocs.c +++ b/arch/x86/boot/compressed/relocs.c @@ -504,8 +504,11 @@ static void walk_relocs(void (*visit)(Elf32_Rel *rel, Elf32_Sym *sym)) if (sym->st_shndx == SHN_ABS) { continue; } - if (r_type == R_386_PC32) { - /* PC relative relocations don't need to be adjusted */ + if (r_type == R_386_NONE || r_type == R_386_PC32) { + /* + * NONE can be ignored and and PC relative + * relocations don't need to be adjusted. + */ } else if (r_type == R_386_32) { /* Visit relocations that need to be adjusted */ -- cgit v1.2.2 From 4319503779060120fa5de9b8fde056603bb6e0fd Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Fri, 6 Mar 2009 20:24:57 +0000 Subject: [CPUFREQ] add atom family to p4-clockmod Some atom procs don't do freq scaling (such as the atom 330 on my own littlefalls2 board). By adding the atom family here, we at least get the benefit of passive cooling in a thermal emergency. Not sure how to see that its actually helping any, but the driver does bind and claim its functioning on my atom 330. Signed-off-by: Jarod Wilson Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/p4-clockmod.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c index 6ac55bd341ae..869615193720 100644 --- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c +++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c @@ -168,6 +168,7 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) case 0x0E: /* Core */ case 0x0F: /* Core Duo */ case 0x16: /* Celeron Core */ + case 0x1C: /* Atom */ p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE); case 0x0D: /* Pentium M (Dothan) */ -- cgit v1.2.2 From d38e73e8dad454a5916f446b0d3523c1161ae95a Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Thu, 23 Apr 2009 13:36:12 -0400 Subject: [CPUFREQ] powernow-k7 build fix when ACPI=n MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit arch/x86/kernel/cpu/cpufreq/powernow-k7.c:172: warning: 'invalidate_entry' defined but not used Reported-by: Toralf Förster Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/powernow-k7.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c index 3c28ccd49742..a8363e5be4ef 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c @@ -168,10 +168,12 @@ static int check_powernow(void) return 1; } +#ifdef CONFIG_X86_POWERNOW_K7_ACPI static void invalidate_entry(unsigned int entry) { powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID; } +#endif static int get_ranges(unsigned char *pst) { -- cgit v1.2.2 From df1829770db415dc5a5ed5ada3bd70176c6f0a01 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Wed, 22 Apr 2009 13:48:32 +0200 Subject: [CPUFREQ] powernow-k8 cleanup msg if BIOS does not export ACPI _PSS cpufreq data - Make the message shorter and easier to grep for - Use printk_once instead of WARN_ONCE (functionality of these was mixed) Signed-off-by: Thomas Renninger Cc: Langsdorf, Mark Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index 4709ead2db52..feef10c085a1 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -1215,13 +1215,16 @@ static int powernowk8_verify(struct cpufreq_policy *pol) return cpufreq_frequency_table_verify(pol, data->powernow_table); } +static const char ACPI_PSS_BIOS_BUG_MSG[] = + KERN_ERR FW_BUG PFX "No compatible ACPI _PSS objects found.\n" + KERN_ERR FW_BUG PFX "Try again with latest BIOS.\n"; + /* per CPU init entry point to the driver */ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) { struct powernow_k8_data *data; cpumask_t oldmask; int rc; - static int print_once; if (!cpu_online(pol->cpu)) return -ENODEV; @@ -1244,19 +1247,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) * an UP version, and is deprecated by AMD. */ if (num_online_cpus() != 1) { - /* - * Replace this one with print_once as soon as such a - * thing gets introduced - */ - if (!print_once) { - WARN_ONCE(1, KERN_ERR FW_BUG PFX "Your BIOS " - "does not provide ACPI _PSS objects " - "in a way that Linux understands. " - "Please report this to the Linux ACPI" - " maintainers and complain to your " - "BIOS vendor.\n"); - print_once++; - } + printk_once(ACPI_PSS_BIOS_BUG_MSG); goto err_out; } if (pol->cpu != 0) { -- cgit v1.2.2 From ca446d06351992e4f1a7c1e5e99870ab4ec5188f Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Wed, 22 Apr 2009 13:48:33 +0200 Subject: [CPUFREQ] powernow-k8: determine exact CPU frequency for HW Pstates Slightly modified by trenn@suse.de -> only do this on fam 10h and fam 11h. Currently powernow-k8 determines CPU frequency from ACPI PSS objects, but according to AMD family 11h BKDG this frequency is just a rounded value: "CoreFreq (MHz) = The CPU COF specified by MSRC001_00[6B:64][CpuFid] rounded to the nearest 100 Mhz." As a consequnce powernow-k8 reports wrong CPU frequency on some systems, e.g. on Turion X2 Ultra: powernow-k8: Found 1 AMD Turion(tm)X2 Ultra DualCore Mobile ZM-82 processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : pstate 0 (2200 MHz) powernow-k8: 1 : pstate 1 (1100 MHz) powernow-k8: 2 : pstate 2 (600 MHz) But this is wrong as frequency for Pstate2 is 550 MHz. x86info reports it correctly: #x86info -a |grep Pstate ... Pstate-0: fid=e, did=0, vid=24 (2200MHz) Pstate-1: fid=e, did=1, vid=30 (1100MHz) Pstate-2: fid=e, did=2, vid=3c (550MHz) (current) Solution is to determine the frequency directly from Pstate MSRs instead of using rounded values from ACPI table. Signed-off-by: Andreas Herrmann Signed-off-by: Thomas Renninger Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index feef10c085a1..f6b32d112357 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -649,6 +649,20 @@ static void print_basics(struct powernow_k8_data *data) data->batps); } +static u32 freq_from_fid_did(u32 fid, u32 did) +{ + u32 mhz = 0; + + if (boot_cpu_data.x86 == 0x10) + mhz = (100 * (fid + 0x10)) >> did; + else if (boot_cpu_data.x86 == 0x11) + mhz = (100 * (fid + 8)) >> did; + else + BUG(); + + return mhz * 1000; +} + static int fill_powernow_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid) { @@ -923,8 +937,13 @@ static int fill_powernow_table_pstate(struct powernow_k8_data *data, powernow_table[i].index = index; - powernow_table[i].frequency = - data->acpi_data.states[i].core_frequency * 1000; + /* Frequency may be rounded for these */ + if (boot_cpu_data.x86 == 0x10 || boot_cpu_data.x86 == 0x11) { + powernow_table[i].frequency = + freq_from_fid_did(lo & 0x3f, (lo >> 6) & 7); + } else + powernow_table[i].frequency = + data->acpi_data.states[i].core_frequency * 1000; } return 0; } -- cgit v1.2.2 From 2171787be2e71ff71159857bfeb21398b61eb615 Mon Sep 17 00:00:00 2001 From: "Pallipadi, Venkatesh" Date: Tue, 26 May 2009 10:33:35 -0700 Subject: x86: avoid back to back on_each_cpu in cpa_flush_array Cleanup cpa_flush_array() to avoid back to back on_each_cpu() calls. [ Impact: optimizes fix 0af48f42df15b97080b450d24219dd95db7b929a ] Signed-off-by: Venkatesh Pallipadi Signed-off-by: H. Peter Anvin --- arch/x86/mm/pageattr.c | 17 +++-------------- 1 file changed, 3 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 0f9052bcec4b..e17efed088c5 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -204,30 +204,19 @@ static void cpa_flush_range(unsigned long start, int numpages, int cache) } } -static void wbinvd_local(void *unused) -{ - wbinvd(); -} - static void cpa_flush_array(unsigned long *start, int numpages, int cache, int in_flags, struct page **pages) { unsigned int i, level; + unsigned long do_wbinvd = cache && numpages >= 1024; /* 4M threshold */ BUG_ON(irqs_disabled()); - on_each_cpu(__cpa_flush_range, NULL, 1); + on_each_cpu(__cpa_flush_all, (void *) do_wbinvd, 1); - if (!cache) + if (!cache || do_wbinvd) return; - /* 4M threshold */ - if (numpages >= 1024) { - if (boot_cpu_data.x86 >= 4) - on_each_cpu(wbinvd_local, NULL, 1); - - return; - } /* * We only need to flush on one CPU, * clflush is a MESI-coherent instruction that -- cgit v1.2.2 From 84532a0fc3d5811dca8e3726fe4d372ea87bd7c6 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 27 May 2009 13:33:14 +1000 Subject: Revert "powerpc: Rework dma-noncoherent to use generic vmalloc layer" This reverts commit 33f00dcedb0e22cdb156a23632814fc580fcfcf8. While it was a good idea to try to use the mm/vmalloc.c allocator instead of our own (in fact, ours is itself a dup on an old variant of the vmalloc one), unfortunately, the approach is terminally busted since dma_alloc_coherent() can be called at interrupt time or in atomic contexts and there's little chances we'll make the code in mm/vmalloc.c cope with\ that :-( Until we can get the generic code to forbid that idiocy and fix all drivers abusing it, we pretty much have no choice but revert to our custom virtual space allocator. There's also a problem with SMP safety since freeing such mapping would require an IPI which cannot be done at interrupt time. However, right now, I don't think we support any platform that is both SMP and has non-coherent DMA (don't laugh, I know such things do exist !) so we can sort that out later. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/Kconfig | 25 +++ arch/powerpc/lib/dma-noncoherent.c | 303 ++++++++++++++++++++++++++++++------- 2 files changed, 271 insertions(+), 57 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index a0d1146a0578..3bb43adce44d 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -868,6 +868,31 @@ config TASK_SIZE default "0x80000000" if PPC_PREP || PPC_8xx default "0xc0000000" +config CONSISTENT_START_BOOL + bool "Set custom consistent memory pool address" + depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE + help + This option allows you to set the base virtual address + of the consistent memory pool. This pool of virtual + memory is used to make consistent memory allocations. + +config CONSISTENT_START + hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL + default "0xfd000000" if (NOT_COHERENT_CACHE && 8xx) + default "0xff100000" if NOT_COHERENT_CACHE + +config CONSISTENT_SIZE_BOOL + bool "Set custom consistent memory pool size" + depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE + help + This option allows you to set the size of the + consistent memory pool. This pool of virtual memory + is used to make consistent memory allocations. + +config CONSISTENT_SIZE + hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL + default "0x00200000" if NOT_COHERENT_CACHE + config PIN_TLB bool "Pinned Kernel TLBs (860 ONLY)" depends on ADVANCED_OPTIONS && 8xx diff --git a/arch/powerpc/lib/dma-noncoherent.c b/arch/powerpc/lib/dma-noncoherent.c index 005a28d380af..b7dc4c19f582 100644 --- a/arch/powerpc/lib/dma-noncoherent.c +++ b/arch/powerpc/lib/dma-noncoherent.c @@ -29,10 +29,120 @@ #include #include #include -#include #include +/* + * This address range defaults to a value that is safe for all + * platforms which currently set CONFIG_NOT_COHERENT_CACHE. It + * can be further configured for specific applications under + * the "Advanced Setup" menu. -Matt + */ +#define CONSISTENT_BASE (CONFIG_CONSISTENT_START) +#define CONSISTENT_END (CONFIG_CONSISTENT_START + CONFIG_CONSISTENT_SIZE) +#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT) + +/* + * This is the page table (2MB) covering uncached, DMA consistent allocations + */ +static pte_t *consistent_pte; +static DEFINE_SPINLOCK(consistent_lock); + +/* + * VM region handling support. + * + * This should become something generic, handling VM region allocations for + * vmalloc and similar (ioremap, module space, etc). + * + * I envisage vmalloc()'s supporting vm_struct becoming: + * + * struct vm_struct { + * struct vm_region region; + * unsigned long flags; + * struct page **pages; + * unsigned int nr_pages; + * unsigned long phys_addr; + * }; + * + * get_vm_area() would then call vm_region_alloc with an appropriate + * struct vm_region head (eg): + * + * struct vm_region vmalloc_head = { + * .vm_list = LIST_HEAD_INIT(vmalloc_head.vm_list), + * .vm_start = VMALLOC_START, + * .vm_end = VMALLOC_END, + * }; + * + * However, vmalloc_head.vm_start is variable (typically, it is dependent on + * the amount of RAM found at boot time.) I would imagine that get_vm_area() + * would have to initialise this each time prior to calling vm_region_alloc(). + */ +struct ppc_vm_region { + struct list_head vm_list; + unsigned long vm_start; + unsigned long vm_end; +}; + +static struct ppc_vm_region consistent_head = { + .vm_list = LIST_HEAD_INIT(consistent_head.vm_list), + .vm_start = CONSISTENT_BASE, + .vm_end = CONSISTENT_END, +}; + +static struct ppc_vm_region * +ppc_vm_region_alloc(struct ppc_vm_region *head, size_t size, gfp_t gfp) +{ + unsigned long addr = head->vm_start, end = head->vm_end - size; + unsigned long flags; + struct ppc_vm_region *c, *new; + + new = kmalloc(sizeof(struct ppc_vm_region), gfp); + if (!new) + goto out; + + spin_lock_irqsave(&consistent_lock, flags); + + list_for_each_entry(c, &head->vm_list, vm_list) { + if ((addr + size) < addr) + goto nospc; + if ((addr + size) <= c->vm_start) + goto found; + addr = c->vm_end; + if (addr > end) + goto nospc; + } + + found: + /* + * Insert this entry _before_ the one we found. + */ + list_add_tail(&new->vm_list, &c->vm_list); + new->vm_start = addr; + new->vm_end = addr + size; + + spin_unlock_irqrestore(&consistent_lock, flags); + return new; + + nospc: + spin_unlock_irqrestore(&consistent_lock, flags); + kfree(new); + out: + return NULL; +} + +static struct ppc_vm_region *ppc_vm_region_find(struct ppc_vm_region *head, unsigned long addr) +{ + struct ppc_vm_region *c; + + list_for_each_entry(c, &head->vm_list, vm_list) { + if (c->vm_start == addr) + goto out; + } + c = NULL; + out: + return c; +} + /* * Allocate DMA-coherent memory space and return both the kernel remapped * virtual and bus address for that space. @@ -41,21 +151,21 @@ void * __dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) { struct page *page; + struct ppc_vm_region *c; unsigned long order; - int i; - unsigned int nr_pages = PAGE_ALIGN(size)>>PAGE_SHIFT; - unsigned int array_size = nr_pages * sizeof(struct page *); - struct page **pages; - struct page *end; u64 mask = 0x00ffffff, limit; /* ISA default */ - struct vm_struct *area; - BUG_ON(!mem_init_done); + if (!consistent_pte) { + printk(KERN_ERR "%s: not initialised\n", __func__); + dump_stack(); + return NULL; + } + size = PAGE_ALIGN(size); limit = (mask + 1) & ~mask; - if (limit && size >= limit) { - printk(KERN_WARNING "coherent allocation too big (requested " - "%#x mask %#Lx)\n", size, mask); + if ((limit && size >= limit) || size >= (CONSISTENT_END - CONSISTENT_BASE)) { + printk(KERN_WARNING "coherent allocation too big (requested %#x mask %#Lx)\n", + size, mask); return NULL; } @@ -68,8 +178,6 @@ __dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) if (!page) goto no_page; - end = page + (1 << order); - /* * Invalidate any data that might be lurking in the * kernel direct-mapped region for device DMA. @@ -80,59 +188,48 @@ __dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) flush_dcache_range(kaddr, kaddr + size); } - split_page(page, order); - /* - * Set the "dma handle" + * Allocate a virtual address in the consistent mapping region. */ - *handle = page_to_phys(page); - - area = get_vm_area_caller(size, VM_IOREMAP, - __builtin_return_address(1)); - if (!area) - goto out_free_pages; - - if (array_size > PAGE_SIZE) { - pages = vmalloc(array_size); - area->flags |= VM_VPAGES; - } else { - pages = kmalloc(array_size, GFP_KERNEL); - } - if (!pages) - goto out_free_area; + c = ppc_vm_region_alloc(&consistent_head, size, + gfp & ~(__GFP_DMA | __GFP_HIGHMEM)); + if (c) { + unsigned long vaddr = c->vm_start; + pte_t *pte = consistent_pte + CONSISTENT_OFFSET(vaddr); + struct page *end = page + (1 << order); - area->pages = pages; - area->nr_pages = nr_pages; + split_page(page, order); - for (i = 0; i < nr_pages; i++) - pages[i] = page + i; + /* + * Set the "dma handle" + */ + *handle = page_to_phys(page); - if (map_vm_area(area, pgprot_noncached(PAGE_KERNEL), &pages)) - goto out_unmap; + do { + BUG_ON(!pte_none(*pte)); - /* - * Free the otherwise unused pages. - */ - page += nr_pages; - while (page < end) { - __free_page(page); - page++; + SetPageReserved(page); + set_pte_at(&init_mm, vaddr, + pte, mk_pte(page, pgprot_noncached(PAGE_KERNEL))); + page++; + pte++; + vaddr += PAGE_SIZE; + } while (size -= PAGE_SIZE); + + /* + * Free the otherwise unused pages. + */ + while (page < end) { + __free_page(page); + page++; + } + + return (void *)c->vm_start; } - return area->addr; -out_unmap: - vunmap(area->addr); - if (array_size > PAGE_SIZE) - vfree(pages); - else - kfree(pages); - goto out_free_pages; -out_free_area: - free_vm_area(area); -out_free_pages: if (page) __free_pages(page, order); -no_page: + no_page: return NULL; } EXPORT_SYMBOL(__dma_alloc_coherent); @@ -142,11 +239,103 @@ EXPORT_SYMBOL(__dma_alloc_coherent); */ void __dma_free_coherent(size_t size, void *vaddr) { - vfree(vaddr); + struct ppc_vm_region *c; + unsigned long flags, addr; + pte_t *ptep; + + size = PAGE_ALIGN(size); + + spin_lock_irqsave(&consistent_lock, flags); + + c = ppc_vm_region_find(&consistent_head, (unsigned long)vaddr); + if (!c) + goto no_area; + + if ((c->vm_end - c->vm_start) != size) { + printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n", + __func__, c->vm_end - c->vm_start, size); + dump_stack(); + size = c->vm_end - c->vm_start; + } + + ptep = consistent_pte + CONSISTENT_OFFSET(c->vm_start); + addr = c->vm_start; + do { + pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep); + unsigned long pfn; + + ptep++; + addr += PAGE_SIZE; + if (!pte_none(pte) && pte_present(pte)) { + pfn = pte_pfn(pte); + + if (pfn_valid(pfn)) { + struct page *page = pfn_to_page(pfn); + ClearPageReserved(page); + + __free_page(page); + continue; + } + } + + printk(KERN_CRIT "%s: bad page in kernel page table\n", + __func__); + } while (size -= PAGE_SIZE); + + flush_tlb_kernel_range(c->vm_start, c->vm_end); + + list_del(&c->vm_list); + + spin_unlock_irqrestore(&consistent_lock, flags); + + kfree(c); + return; + + no_area: + spin_unlock_irqrestore(&consistent_lock, flags); + printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n", + __func__, vaddr); + dump_stack(); } EXPORT_SYMBOL(__dma_free_coherent); +/* + * Initialise the consistent memory allocation. + */ +static int __init dma_alloc_init(void) +{ + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + pte_t *pte; + int ret = 0; + + do { + pgd = pgd_offset(&init_mm, CONSISTENT_BASE); + pud = pud_alloc(&init_mm, pgd, CONSISTENT_BASE); + pmd = pmd_alloc(&init_mm, pud, CONSISTENT_BASE); + if (!pmd) { + printk(KERN_ERR "%s: no pmd tables\n", __func__); + ret = -ENOMEM; + break; + } + + pte = pte_alloc_kernel(pmd, CONSISTENT_BASE); + if (!pte) { + printk(KERN_ERR "%s: no pte tables\n", __func__); + ret = -ENOMEM; + break; + } + + consistent_pte = pte; + } while (0); + + return ret; +} + +core_initcall(dma_alloc_init); + /* * make an area consistent. */ -- cgit v1.2.2 From 7a1450fdf4c69961f3926352fd8bc4ea19676756 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 26 May 2009 04:55:38 -0400 Subject: Blackfin: hook up preadv/pwritev syscalls Signed-off-by: Mike Frysinger --- arch/blackfin/include/asm/unistd.h | 4 +++- arch/blackfin/mach-common/entry.S | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h index 1e57b636e0bc..cf5066d3efd2 100644 --- a/arch/blackfin/include/asm/unistd.h +++ b/arch/blackfin/include/asm/unistd.h @@ -378,8 +378,10 @@ #define __NR_dup3 363 #define __NR_pipe2 364 #define __NR_inotify_init1 365 +#define __NR_preadv 366 +#define __NR_pwritev 367 -#define __NR_syscall 366 +#define __NR_syscall 368 #define NR_syscalls __NR_syscall /* Old optional stuff no one actually uses */ diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 21e65a339a22..a063a434f7e3 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -1581,6 +1581,8 @@ ENTRY(_sys_call_table) .long _sys_dup3 .long _sys_pipe2 .long _sys_inotify_init1 /* 365 */ + .long _sys_preadv + .long _sys_pwritev .rept NR_syscalls-(.-_sys_call_table)/4 .long _sys_ni_syscall -- cgit v1.2.2 From 6b50520b2fd9bf521f9c947b5f6999bad273a51d Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 19 May 2009 10:03:22 -0400 Subject: Blackfin: ignore generated vmlinux.lds Signed-off-by: Mike Frysinger --- arch/blackfin/kernel/.gitignore | 1 + 1 file changed, 1 insertion(+) create mode 100644 arch/blackfin/kernel/.gitignore (limited to 'arch') diff --git a/arch/blackfin/kernel/.gitignore b/arch/blackfin/kernel/.gitignore new file mode 100644 index 000000000000..c5f676c3c224 --- /dev/null +++ b/arch/blackfin/kernel/.gitignore @@ -0,0 +1 @@ +vmlinux.lds -- cgit v1.2.2 From 2ec10ea91bf3688013b00638f29df4f8f6b5c18b Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 20 May 2009 19:45:39 -0400 Subject: Blackfin: drop unneeded asm/.gitignore We don't create a include/asm/mach/ symlink anymore, so we don't need the .gitignore for it. Signed-off-by: Mike Frysinger --- arch/blackfin/include/asm/.gitignore | 1 - 1 file changed, 1 deletion(-) delete mode 100644 arch/blackfin/include/asm/.gitignore (limited to 'arch') diff --git a/arch/blackfin/include/asm/.gitignore b/arch/blackfin/include/asm/.gitignore deleted file mode 100644 index 7858564a4466..000000000000 --- a/arch/blackfin/include/asm/.gitignore +++ /dev/null @@ -1 +0,0 @@ -+mach -- cgit v1.2.2 From add8a5050a52f1bd1be6b97be86fdd1cfbea2d1d Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 26 May 2009 05:03:52 -0400 Subject: Blackfin: fix strncmp.o build error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix some more fallout of the string changes: CC arch/blackfin/lib/strncmp.o In file included from include/linux/bitmap.h:9, from include/linux/nodemask.h:90, from include/linux/mmzone.h:17, from include/linux/gfp.h:5, from include/linux/kmod.h:23, from include/linux/module.h:14, from arch/blackfin/lib/strncmp.c:14: include/linux/string.h: In function ‘strstarts’: include/linux/string.h:132: error: implicit declaration of function ‘strncmp’ make[1]: *** [arch/blackfin/lib/strncmp.o] Error 1 Signed-off-by: Mike Frysinger CC: Rusty Russell --- arch/blackfin/lib/strncmp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/lib/strncmp.c b/arch/blackfin/lib/strncmp.c index 2aaae78a68e0..46518b1d2983 100644 --- a/arch/blackfin/lib/strncmp.c +++ b/arch/blackfin/lib/strncmp.c @@ -8,9 +8,8 @@ #define strncmp __inline_strncmp #include -#undef strncmp - #include +#undef strncmp int strncmp(const char *cs, const char *ct, size_t count) { -- cgit v1.2.2 From b16e7766d6436835f473ba823ad04fbdfe5e9cbd Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 27 May 2009 13:36:10 +1000 Subject: powerpc: Move dma-noncoherent.c from arch/powerpc/lib to arch/powerpc/mm (pre-requisite to make the next patches more palatable) Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/lib/Makefile | 1 - arch/powerpc/lib/dma-noncoherent.c | 426 ------------------------------------- arch/powerpc/mm/Makefile | 1 + arch/powerpc/mm/dma-noncoherent.c | 426 +++++++++++++++++++++++++++++++++++++ 4 files changed, 427 insertions(+), 427 deletions(-) delete mode 100644 arch/powerpc/lib/dma-noncoherent.c create mode 100644 arch/powerpc/mm/dma-noncoherent.c (limited to 'arch') diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 8db35278a4b4..29b742b90f1f 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -18,7 +18,6 @@ obj-$(CONFIG_PPC64) += copypage_64.o copyuser_64.o \ memcpy_64.o usercopy_64.o mem_64.o string.o obj-$(CONFIG_XMON) += sstep.o obj-$(CONFIG_KPROBES) += sstep.o -obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o ifeq ($(CONFIG_PPC64),y) obj-$(CONFIG_SMP) += locks.o diff --git a/arch/powerpc/lib/dma-noncoherent.c b/arch/powerpc/lib/dma-noncoherent.c deleted file mode 100644 index b7dc4c19f582..000000000000 --- a/arch/powerpc/lib/dma-noncoherent.c +++ /dev/null @@ -1,426 +0,0 @@ -/* - * PowerPC version derived from arch/arm/mm/consistent.c - * Copyright (C) 2001 Dan Malek (dmalek@jlc.net) - * - * Copyright (C) 2000 Russell King - * - * Consistent memory allocators. Used for DMA devices that want to - * share uncached memory with the processor core. The function return - * is the virtual address and 'dma_handle' is the physical address. - * Mostly stolen from the ARM port, with some changes for PowerPC. - * -- Dan - * - * Reorganized to get rid of the arch-specific consistent_* functions - * and provide non-coherent implementations for the DMA API. -Matt - * - * Added in_interrupt() safe dma_alloc_coherent()/dma_free_coherent() - * implementation. This is pulled straight from ARM and barely - * modified. -Matt - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include - -#include - -/* - * This address range defaults to a value that is safe for all - * platforms which currently set CONFIG_NOT_COHERENT_CACHE. It - * can be further configured for specific applications under - * the "Advanced Setup" menu. -Matt - */ -#define CONSISTENT_BASE (CONFIG_CONSISTENT_START) -#define CONSISTENT_END (CONFIG_CONSISTENT_START + CONFIG_CONSISTENT_SIZE) -#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT) - -/* - * This is the page table (2MB) covering uncached, DMA consistent allocations - */ -static pte_t *consistent_pte; -static DEFINE_SPINLOCK(consistent_lock); - -/* - * VM region handling support. - * - * This should become something generic, handling VM region allocations for - * vmalloc and similar (ioremap, module space, etc). - * - * I envisage vmalloc()'s supporting vm_struct becoming: - * - * struct vm_struct { - * struct vm_region region; - * unsigned long flags; - * struct page **pages; - * unsigned int nr_pages; - * unsigned long phys_addr; - * }; - * - * get_vm_area() would then call vm_region_alloc with an appropriate - * struct vm_region head (eg): - * - * struct vm_region vmalloc_head = { - * .vm_list = LIST_HEAD_INIT(vmalloc_head.vm_list), - * .vm_start = VMALLOC_START, - * .vm_end = VMALLOC_END, - * }; - * - * However, vmalloc_head.vm_start is variable (typically, it is dependent on - * the amount of RAM found at boot time.) I would imagine that get_vm_area() - * would have to initialise this each time prior to calling vm_region_alloc(). - */ -struct ppc_vm_region { - struct list_head vm_list; - unsigned long vm_start; - unsigned long vm_end; -}; - -static struct ppc_vm_region consistent_head = { - .vm_list = LIST_HEAD_INIT(consistent_head.vm_list), - .vm_start = CONSISTENT_BASE, - .vm_end = CONSISTENT_END, -}; - -static struct ppc_vm_region * -ppc_vm_region_alloc(struct ppc_vm_region *head, size_t size, gfp_t gfp) -{ - unsigned long addr = head->vm_start, end = head->vm_end - size; - unsigned long flags; - struct ppc_vm_region *c, *new; - - new = kmalloc(sizeof(struct ppc_vm_region), gfp); - if (!new) - goto out; - - spin_lock_irqsave(&consistent_lock, flags); - - list_for_each_entry(c, &head->vm_list, vm_list) { - if ((addr + size) < addr) - goto nospc; - if ((addr + size) <= c->vm_start) - goto found; - addr = c->vm_end; - if (addr > end) - goto nospc; - } - - found: - /* - * Insert this entry _before_ the one we found. - */ - list_add_tail(&new->vm_list, &c->vm_list); - new->vm_start = addr; - new->vm_end = addr + size; - - spin_unlock_irqrestore(&consistent_lock, flags); - return new; - - nospc: - spin_unlock_irqrestore(&consistent_lock, flags); - kfree(new); - out: - return NULL; -} - -static struct ppc_vm_region *ppc_vm_region_find(struct ppc_vm_region *head, unsigned long addr) -{ - struct ppc_vm_region *c; - - list_for_each_entry(c, &head->vm_list, vm_list) { - if (c->vm_start == addr) - goto out; - } - c = NULL; - out: - return c; -} - -/* - * Allocate DMA-coherent memory space and return both the kernel remapped - * virtual and bus address for that space. - */ -void * -__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) -{ - struct page *page; - struct ppc_vm_region *c; - unsigned long order; - u64 mask = 0x00ffffff, limit; /* ISA default */ - - if (!consistent_pte) { - printk(KERN_ERR "%s: not initialised\n", __func__); - dump_stack(); - return NULL; - } - - size = PAGE_ALIGN(size); - limit = (mask + 1) & ~mask; - if ((limit && size >= limit) || size >= (CONSISTENT_END - CONSISTENT_BASE)) { - printk(KERN_WARNING "coherent allocation too big (requested %#x mask %#Lx)\n", - size, mask); - return NULL; - } - - order = get_order(size); - - if (mask != 0xffffffff) - gfp |= GFP_DMA; - - page = alloc_pages(gfp, order); - if (!page) - goto no_page; - - /* - * Invalidate any data that might be lurking in the - * kernel direct-mapped region for device DMA. - */ - { - unsigned long kaddr = (unsigned long)page_address(page); - memset(page_address(page), 0, size); - flush_dcache_range(kaddr, kaddr + size); - } - - /* - * Allocate a virtual address in the consistent mapping region. - */ - c = ppc_vm_region_alloc(&consistent_head, size, - gfp & ~(__GFP_DMA | __GFP_HIGHMEM)); - if (c) { - unsigned long vaddr = c->vm_start; - pte_t *pte = consistent_pte + CONSISTENT_OFFSET(vaddr); - struct page *end = page + (1 << order); - - split_page(page, order); - - /* - * Set the "dma handle" - */ - *handle = page_to_phys(page); - - do { - BUG_ON(!pte_none(*pte)); - - SetPageReserved(page); - set_pte_at(&init_mm, vaddr, - pte, mk_pte(page, pgprot_noncached(PAGE_KERNEL))); - page++; - pte++; - vaddr += PAGE_SIZE; - } while (size -= PAGE_SIZE); - - /* - * Free the otherwise unused pages. - */ - while (page < end) { - __free_page(page); - page++; - } - - return (void *)c->vm_start; - } - - if (page) - __free_pages(page, order); - no_page: - return NULL; -} -EXPORT_SYMBOL(__dma_alloc_coherent); - -/* - * free a page as defined by the above mapping. - */ -void __dma_free_coherent(size_t size, void *vaddr) -{ - struct ppc_vm_region *c; - unsigned long flags, addr; - pte_t *ptep; - - size = PAGE_ALIGN(size); - - spin_lock_irqsave(&consistent_lock, flags); - - c = ppc_vm_region_find(&consistent_head, (unsigned long)vaddr); - if (!c) - goto no_area; - - if ((c->vm_end - c->vm_start) != size) { - printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n", - __func__, c->vm_end - c->vm_start, size); - dump_stack(); - size = c->vm_end - c->vm_start; - } - - ptep = consistent_pte + CONSISTENT_OFFSET(c->vm_start); - addr = c->vm_start; - do { - pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep); - unsigned long pfn; - - ptep++; - addr += PAGE_SIZE; - - if (!pte_none(pte) && pte_present(pte)) { - pfn = pte_pfn(pte); - - if (pfn_valid(pfn)) { - struct page *page = pfn_to_page(pfn); - ClearPageReserved(page); - - __free_page(page); - continue; - } - } - - printk(KERN_CRIT "%s: bad page in kernel page table\n", - __func__); - } while (size -= PAGE_SIZE); - - flush_tlb_kernel_range(c->vm_start, c->vm_end); - - list_del(&c->vm_list); - - spin_unlock_irqrestore(&consistent_lock, flags); - - kfree(c); - return; - - no_area: - spin_unlock_irqrestore(&consistent_lock, flags); - printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n", - __func__, vaddr); - dump_stack(); -} -EXPORT_SYMBOL(__dma_free_coherent); - -/* - * Initialise the consistent memory allocation. - */ -static int __init dma_alloc_init(void) -{ - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *pte; - int ret = 0; - - do { - pgd = pgd_offset(&init_mm, CONSISTENT_BASE); - pud = pud_alloc(&init_mm, pgd, CONSISTENT_BASE); - pmd = pmd_alloc(&init_mm, pud, CONSISTENT_BASE); - if (!pmd) { - printk(KERN_ERR "%s: no pmd tables\n", __func__); - ret = -ENOMEM; - break; - } - - pte = pte_alloc_kernel(pmd, CONSISTENT_BASE); - if (!pte) { - printk(KERN_ERR "%s: no pte tables\n", __func__); - ret = -ENOMEM; - break; - } - - consistent_pte = pte; - } while (0); - - return ret; -} - -core_initcall(dma_alloc_init); - -/* - * make an area consistent. - */ -void __dma_sync(void *vaddr, size_t size, int direction) -{ - unsigned long start = (unsigned long)vaddr; - unsigned long end = start + size; - - switch (direction) { - case DMA_NONE: - BUG(); - case DMA_FROM_DEVICE: - /* - * invalidate only when cache-line aligned otherwise there is - * the potential for discarding uncommitted data from the cache - */ - if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1))) - flush_dcache_range(start, end); - else - invalidate_dcache_range(start, end); - break; - case DMA_TO_DEVICE: /* writeback only */ - clean_dcache_range(start, end); - break; - case DMA_BIDIRECTIONAL: /* writeback and invalidate */ - flush_dcache_range(start, end); - break; - } -} -EXPORT_SYMBOL(__dma_sync); - -#ifdef CONFIG_HIGHMEM -/* - * __dma_sync_page() implementation for systems using highmem. - * In this case, each page of a buffer must be kmapped/kunmapped - * in order to have a virtual address for __dma_sync(). This must - * not sleep so kmap_atomic()/kunmap_atomic() are used. - * - * Note: yes, it is possible and correct to have a buffer extend - * beyond the first page. - */ -static inline void __dma_sync_page_highmem(struct page *page, - unsigned long offset, size_t size, int direction) -{ - size_t seg_size = min((size_t)(PAGE_SIZE - offset), size); - size_t cur_size = seg_size; - unsigned long flags, start, seg_offset = offset; - int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE; - int seg_nr = 0; - - local_irq_save(flags); - - do { - start = (unsigned long)kmap_atomic(page + seg_nr, - KM_PPC_SYNC_PAGE) + seg_offset; - - /* Sync this buffer segment */ - __dma_sync((void *)start, seg_size, direction); - kunmap_atomic((void *)start, KM_PPC_SYNC_PAGE); - seg_nr++; - - /* Calculate next buffer segment size */ - seg_size = min((size_t)PAGE_SIZE, size - cur_size); - - /* Add the segment size to our running total */ - cur_size += seg_size; - seg_offset = 0; - } while (seg_nr < nr_segs); - - local_irq_restore(flags); -} -#endif /* CONFIG_HIGHMEM */ - -/* - * __dma_sync_page makes memory consistent. identical to __dma_sync, but - * takes a struct page instead of a virtual address - */ -void __dma_sync_page(struct page *page, unsigned long offset, - size_t size, int direction) -{ -#ifdef CONFIG_HIGHMEM - __dma_sync_page_highmem(page, offset, size, direction); -#else - unsigned long start = (unsigned long)page_address(page) + offset; - __dma_sync((void *)start, size, direction); -#endif -} -EXPORT_SYMBOL(__dma_sync_page); diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index 17290bcedc5e..b746f4ca4209 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -26,3 +26,4 @@ obj-$(CONFIG_NEED_MULTIPLE_NODES) += numa.o obj-$(CONFIG_PPC_MM_SLICES) += slice.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_PPC_SUBPAGE_PROT) += subpage-prot.o +obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o diff --git a/arch/powerpc/mm/dma-noncoherent.c b/arch/powerpc/mm/dma-noncoherent.c new file mode 100644 index 000000000000..b7dc4c19f582 --- /dev/null +++ b/arch/powerpc/mm/dma-noncoherent.c @@ -0,0 +1,426 @@ +/* + * PowerPC version derived from arch/arm/mm/consistent.c + * Copyright (C) 2001 Dan Malek (dmalek@jlc.net) + * + * Copyright (C) 2000 Russell King + * + * Consistent memory allocators. Used for DMA devices that want to + * share uncached memory with the processor core. The function return + * is the virtual address and 'dma_handle' is the physical address. + * Mostly stolen from the ARM port, with some changes for PowerPC. + * -- Dan + * + * Reorganized to get rid of the arch-specific consistent_* functions + * and provide non-coherent implementations for the DMA API. -Matt + * + * Added in_interrupt() safe dma_alloc_coherent()/dma_free_coherent() + * implementation. This is pulled straight from ARM and barely + * modified. -Matt + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +/* + * This address range defaults to a value that is safe for all + * platforms which currently set CONFIG_NOT_COHERENT_CACHE. It + * can be further configured for specific applications under + * the "Advanced Setup" menu. -Matt + */ +#define CONSISTENT_BASE (CONFIG_CONSISTENT_START) +#define CONSISTENT_END (CONFIG_CONSISTENT_START + CONFIG_CONSISTENT_SIZE) +#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT) + +/* + * This is the page table (2MB) covering uncached, DMA consistent allocations + */ +static pte_t *consistent_pte; +static DEFINE_SPINLOCK(consistent_lock); + +/* + * VM region handling support. + * + * This should become something generic, handling VM region allocations for + * vmalloc and similar (ioremap, module space, etc). + * + * I envisage vmalloc()'s supporting vm_struct becoming: + * + * struct vm_struct { + * struct vm_region region; + * unsigned long flags; + * struct page **pages; + * unsigned int nr_pages; + * unsigned long phys_addr; + * }; + * + * get_vm_area() would then call vm_region_alloc with an appropriate + * struct vm_region head (eg): + * + * struct vm_region vmalloc_head = { + * .vm_list = LIST_HEAD_INIT(vmalloc_head.vm_list), + * .vm_start = VMALLOC_START, + * .vm_end = VMALLOC_END, + * }; + * + * However, vmalloc_head.vm_start is variable (typically, it is dependent on + * the amount of RAM found at boot time.) I would imagine that get_vm_area() + * would have to initialise this each time prior to calling vm_region_alloc(). + */ +struct ppc_vm_region { + struct list_head vm_list; + unsigned long vm_start; + unsigned long vm_end; +}; + +static struct ppc_vm_region consistent_head = { + .vm_list = LIST_HEAD_INIT(consistent_head.vm_list), + .vm_start = CONSISTENT_BASE, + .vm_end = CONSISTENT_END, +}; + +static struct ppc_vm_region * +ppc_vm_region_alloc(struct ppc_vm_region *head, size_t size, gfp_t gfp) +{ + unsigned long addr = head->vm_start, end = head->vm_end - size; + unsigned long flags; + struct ppc_vm_region *c, *new; + + new = kmalloc(sizeof(struct ppc_vm_region), gfp); + if (!new) + goto out; + + spin_lock_irqsave(&consistent_lock, flags); + + list_for_each_entry(c, &head->vm_list, vm_list) { + if ((addr + size) < addr) + goto nospc; + if ((addr + size) <= c->vm_start) + goto found; + addr = c->vm_end; + if (addr > end) + goto nospc; + } + + found: + /* + * Insert this entry _before_ the one we found. + */ + list_add_tail(&new->vm_list, &c->vm_list); + new->vm_start = addr; + new->vm_end = addr + size; + + spin_unlock_irqrestore(&consistent_lock, flags); + return new; + + nospc: + spin_unlock_irqrestore(&consistent_lock, flags); + kfree(new); + out: + return NULL; +} + +static struct ppc_vm_region *ppc_vm_region_find(struct ppc_vm_region *head, unsigned long addr) +{ + struct ppc_vm_region *c; + + list_for_each_entry(c, &head->vm_list, vm_list) { + if (c->vm_start == addr) + goto out; + } + c = NULL; + out: + return c; +} + +/* + * Allocate DMA-coherent memory space and return both the kernel remapped + * virtual and bus address for that space. + */ +void * +__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) +{ + struct page *page; + struct ppc_vm_region *c; + unsigned long order; + u64 mask = 0x00ffffff, limit; /* ISA default */ + + if (!consistent_pte) { + printk(KERN_ERR "%s: not initialised\n", __func__); + dump_stack(); + return NULL; + } + + size = PAGE_ALIGN(size); + limit = (mask + 1) & ~mask; + if ((limit && size >= limit) || size >= (CONSISTENT_END - CONSISTENT_BASE)) { + printk(KERN_WARNING "coherent allocation too big (requested %#x mask %#Lx)\n", + size, mask); + return NULL; + } + + order = get_order(size); + + if (mask != 0xffffffff) + gfp |= GFP_DMA; + + page = alloc_pages(gfp, order); + if (!page) + goto no_page; + + /* + * Invalidate any data that might be lurking in the + * kernel direct-mapped region for device DMA. + */ + { + unsigned long kaddr = (unsigned long)page_address(page); + memset(page_address(page), 0, size); + flush_dcache_range(kaddr, kaddr + size); + } + + /* + * Allocate a virtual address in the consistent mapping region. + */ + c = ppc_vm_region_alloc(&consistent_head, size, + gfp & ~(__GFP_DMA | __GFP_HIGHMEM)); + if (c) { + unsigned long vaddr = c->vm_start; + pte_t *pte = consistent_pte + CONSISTENT_OFFSET(vaddr); + struct page *end = page + (1 << order); + + split_page(page, order); + + /* + * Set the "dma handle" + */ + *handle = page_to_phys(page); + + do { + BUG_ON(!pte_none(*pte)); + + SetPageReserved(page); + set_pte_at(&init_mm, vaddr, + pte, mk_pte(page, pgprot_noncached(PAGE_KERNEL))); + page++; + pte++; + vaddr += PAGE_SIZE; + } while (size -= PAGE_SIZE); + + /* + * Free the otherwise unused pages. + */ + while (page < end) { + __free_page(page); + page++; + } + + return (void *)c->vm_start; + } + + if (page) + __free_pages(page, order); + no_page: + return NULL; +} +EXPORT_SYMBOL(__dma_alloc_coherent); + +/* + * free a page as defined by the above mapping. + */ +void __dma_free_coherent(size_t size, void *vaddr) +{ + struct ppc_vm_region *c; + unsigned long flags, addr; + pte_t *ptep; + + size = PAGE_ALIGN(size); + + spin_lock_irqsave(&consistent_lock, flags); + + c = ppc_vm_region_find(&consistent_head, (unsigned long)vaddr); + if (!c) + goto no_area; + + if ((c->vm_end - c->vm_start) != size) { + printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n", + __func__, c->vm_end - c->vm_start, size); + dump_stack(); + size = c->vm_end - c->vm_start; + } + + ptep = consistent_pte + CONSISTENT_OFFSET(c->vm_start); + addr = c->vm_start; + do { + pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep); + unsigned long pfn; + + ptep++; + addr += PAGE_SIZE; + + if (!pte_none(pte) && pte_present(pte)) { + pfn = pte_pfn(pte); + + if (pfn_valid(pfn)) { + struct page *page = pfn_to_page(pfn); + ClearPageReserved(page); + + __free_page(page); + continue; + } + } + + printk(KERN_CRIT "%s: bad page in kernel page table\n", + __func__); + } while (size -= PAGE_SIZE); + + flush_tlb_kernel_range(c->vm_start, c->vm_end); + + list_del(&c->vm_list); + + spin_unlock_irqrestore(&consistent_lock, flags); + + kfree(c); + return; + + no_area: + spin_unlock_irqrestore(&consistent_lock, flags); + printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n", + __func__, vaddr); + dump_stack(); +} +EXPORT_SYMBOL(__dma_free_coherent); + +/* + * Initialise the consistent memory allocation. + */ +static int __init dma_alloc_init(void) +{ + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + pte_t *pte; + int ret = 0; + + do { + pgd = pgd_offset(&init_mm, CONSISTENT_BASE); + pud = pud_alloc(&init_mm, pgd, CONSISTENT_BASE); + pmd = pmd_alloc(&init_mm, pud, CONSISTENT_BASE); + if (!pmd) { + printk(KERN_ERR "%s: no pmd tables\n", __func__); + ret = -ENOMEM; + break; + } + + pte = pte_alloc_kernel(pmd, CONSISTENT_BASE); + if (!pte) { + printk(KERN_ERR "%s: no pte tables\n", __func__); + ret = -ENOMEM; + break; + } + + consistent_pte = pte; + } while (0); + + return ret; +} + +core_initcall(dma_alloc_init); + +/* + * make an area consistent. + */ +void __dma_sync(void *vaddr, size_t size, int direction) +{ + unsigned long start = (unsigned long)vaddr; + unsigned long end = start + size; + + switch (direction) { + case DMA_NONE: + BUG(); + case DMA_FROM_DEVICE: + /* + * invalidate only when cache-line aligned otherwise there is + * the potential for discarding uncommitted data from the cache + */ + if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1))) + flush_dcache_range(start, end); + else + invalidate_dcache_range(start, end); + break; + case DMA_TO_DEVICE: /* writeback only */ + clean_dcache_range(start, end); + break; + case DMA_BIDIRECTIONAL: /* writeback and invalidate */ + flush_dcache_range(start, end); + break; + } +} +EXPORT_SYMBOL(__dma_sync); + +#ifdef CONFIG_HIGHMEM +/* + * __dma_sync_page() implementation for systems using highmem. + * In this case, each page of a buffer must be kmapped/kunmapped + * in order to have a virtual address for __dma_sync(). This must + * not sleep so kmap_atomic()/kunmap_atomic() are used. + * + * Note: yes, it is possible and correct to have a buffer extend + * beyond the first page. + */ +static inline void __dma_sync_page_highmem(struct page *page, + unsigned long offset, size_t size, int direction) +{ + size_t seg_size = min((size_t)(PAGE_SIZE - offset), size); + size_t cur_size = seg_size; + unsigned long flags, start, seg_offset = offset; + int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE; + int seg_nr = 0; + + local_irq_save(flags); + + do { + start = (unsigned long)kmap_atomic(page + seg_nr, + KM_PPC_SYNC_PAGE) + seg_offset; + + /* Sync this buffer segment */ + __dma_sync((void *)start, seg_size, direction); + kunmap_atomic((void *)start, KM_PPC_SYNC_PAGE); + seg_nr++; + + /* Calculate next buffer segment size */ + seg_size = min((size_t)PAGE_SIZE, size - cur_size); + + /* Add the segment size to our running total */ + cur_size += seg_size; + seg_offset = 0; + } while (seg_nr < nr_segs); + + local_irq_restore(flags); +} +#endif /* CONFIG_HIGHMEM */ + +/* + * __dma_sync_page makes memory consistent. identical to __dma_sync, but + * takes a struct page instead of a virtual address + */ +void __dma_sync_page(struct page *page, unsigned long offset, + size_t size, int direction) +{ +#ifdef CONFIG_HIGHMEM + __dma_sync_page_highmem(page, offset, size, direction); +#else + unsigned long start = (unsigned long)page_address(page) + offset; + __dma_sync((void *)start, size, direction); +#endif +} +EXPORT_SYMBOL(__dma_sync_page); -- cgit v1.2.2 From f637a49e507c88354ab32b5d914e06acfb7ee00d Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 27 May 2009 13:44:50 +1000 Subject: powerpc: Minor cleanups of kernel virt address space definitions Make FIXADDR_TOP a compile time constant and cleanup a couple of definitions relative to the layout of the kernel address space on ppc32. We also print out that layout at boot time for debugging purposes. This is a pre-requisite for properly fixing non-coherent DMA allocactions. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/fixmap.h | 4 ++-- arch/powerpc/include/asm/pgtable-ppc32.h | 22 ++++++++++++++++++++-- arch/powerpc/mm/init_32.c | 8 ++------ arch/powerpc/mm/mem.c | 13 +++++++++++++ arch/powerpc/mm/pgtable_32.c | 2 -- 5 files changed, 37 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/fixmap.h b/arch/powerpc/include/asm/fixmap.h index d60fd18f428c..f1f4e23a84e9 100644 --- a/arch/powerpc/include/asm/fixmap.h +++ b/arch/powerpc/include/asm/fixmap.h @@ -14,8 +14,6 @@ #ifndef _ASM_FIXMAP_H #define _ASM_FIXMAP_H -extern unsigned long FIXADDR_TOP; - #ifndef __ASSEMBLY__ #include #include @@ -24,6 +22,8 @@ extern unsigned long FIXADDR_TOP; #include #endif +#define FIXADDR_TOP ((unsigned long)(-PAGE_SIZE)) + /* * Here we define all the compile-time 'special' virtual * addresses. The point is to have a constant address at diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h index ba45c997830f..28fe9d4bae35 100644 --- a/arch/powerpc/include/asm/pgtable-ppc32.h +++ b/arch/powerpc/include/asm/pgtable-ppc32.h @@ -10,7 +10,7 @@ extern unsigned long va_to_phys(unsigned long address); extern pte_t *va_to_pte(unsigned long address); -extern unsigned long ioremap_bot, ioremap_base; +extern unsigned long ioremap_bot; #ifdef CONFIG_44x extern int icache_44x_need_flush; @@ -55,9 +55,27 @@ extern int icache_44x_need_flush; #define pgd_ERROR(e) \ printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) +/* + * This is the bottom of the PKMAP area with HIGHMEM or an arbitrary + * value (for now) on others, from where we can start layout kernel + * virtual space that goes below PKMAP and FIXMAP + */ +#ifdef CONFIG_HIGHMEM +#define KVIRT_TOP PKMAP_BASE +#else +#define KVIRT_TOP (0xfe000000UL) /* for now, could be FIXMAP_BASE ? */ +#endif + +/* + * ioremap_bot starts at that address. Early ioremaps move down from there, + * until mem_init() at which point this becomes the top of the vmalloc + * and ioremap space + */ +#define IOREMAP_TOP KVIRT_TOP + /* * Just any arbitrary offset to the start of the vmalloc VM area: the - * current 64MB value just means that there will be a 64MB "hole" after the + * current 16MB value just means that there will be a 64MB "hole" after the * physical memory until the kernel virtual memory starts. That means that * any out-of-bounds memory accesses will hopefully be caught. * The vmalloc() routines leaves a hole of 4kB between each vmalloced diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 666a5e8a5be1..3de6a0d93824 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -168,12 +168,8 @@ void __init MMU_init(void) ppc_md.progress("MMU:mapin", 0x301); mapin_ram(); -#ifdef CONFIG_HIGHMEM - ioremap_base = PKMAP_BASE; -#else - ioremap_base = 0xfe000000UL; /* for now, could be 0xfffff000 */ -#endif /* CONFIG_HIGHMEM */ - ioremap_bot = ioremap_base; + /* Initialize early top-down ioremap allocator */ + ioremap_bot = IOREMAP_TOP; /* Map in I/O resources */ if (ppc_md.progress) diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index d0602a76bf7f..d3a4e67561fa 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -380,6 +380,19 @@ void __init mem_init(void) bsssize >> 10, initsize >> 10); +#ifdef CONFIG_PPC32 + pr_info("Kernel virtual memory layout:\n"); + pr_info(" * 0x%08lx..0x%08lx : fixmap\n", FIXADDR_START, FIXADDR_TOP); +#ifdef CONFIG_HIGHMEM + pr_info(" * 0x%08lx..0x%08lx : highmem PTEs\n", + PKMAP_BASE, PKMAP_ADDR(LAST_PKMAP)); +#endif /* CONFIG_HIGHMEM */ + pr_info(" * 0x%08lx..0x%08lx : early ioremap\n", + ioremap_bot, IOREMAP_TOP); + pr_info(" * 0x%08lx..0x%08lx : vmalloc & ioremap\n", + VMALLOC_START, VMALLOC_END); +#endif /* CONFIG_PPC32 */ + mem_init_done = 1; } diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index 430d0908fa50..5422169626ba 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -399,8 +399,6 @@ void kernel_map_pages(struct page *page, int numpages, int enable) #endif /* CONFIG_DEBUG_PAGEALLOC */ static int fixmaps; -unsigned long FIXADDR_TOP = (-PAGE_SIZE); -EXPORT_SYMBOL(FIXADDR_TOP); void __set_fixmap (enum fixed_addresses idx, phys_addr_t phys, pgprot_t flags) { -- cgit v1.2.2 From 8b31e49d1d75729c1da9009664ba52abd1adc628 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 27 May 2009 13:50:33 +1000 Subject: powerpc: Fix up dma_alloc_coherent() on platforms without cache coherency. The implementation we just revived has issues, such as using a Kconfig-defined virtual address area in kernel space that nothing actually carves out (and thus will overlap whatever is there), or having some dependencies on being self contained in a single PTE page which adds unnecessary constraints on the kernel virtual address space. This fixes it by using more classic PTE accessors and automatically locating the area for consistent memory, carving an appropriate hole in the kernel virtual address space, leaving only the size of that area as a Kconfig option. It also brings some dma-mask related fixes from the ARM implementation which was almost identical initially but grew its own fixes. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/Kconfig | 13 ---- arch/powerpc/include/asm/dma-mapping.h | 6 +- arch/powerpc/include/asm/pgtable-ppc32.h | 4 ++ arch/powerpc/kernel/dma.c | 2 +- arch/powerpc/mm/dma-noncoherent.c | 108 ++++++++++++------------------- arch/powerpc/mm/mem.c | 4 ++ 6 files changed, 54 insertions(+), 83 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 3bb43adce44d..cdc9a6ff4be8 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -868,19 +868,6 @@ config TASK_SIZE default "0x80000000" if PPC_PREP || PPC_8xx default "0xc0000000" -config CONSISTENT_START_BOOL - bool "Set custom consistent memory pool address" - depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE - help - This option allows you to set the base virtual address - of the consistent memory pool. This pool of virtual - memory is used to make consistent memory allocations. - -config CONSISTENT_START - hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL - default "0xfd000000" if (NOT_COHERENT_CACHE && 8xx) - default "0xff100000" if NOT_COHERENT_CACHE - config CONSISTENT_SIZE_BOOL bool "Set custom consistent memory pool size" depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h index c69f2b5f0cc4..cb448d68452c 100644 --- a/arch/powerpc/include/asm/dma-mapping.h +++ b/arch/powerpc/include/asm/dma-mapping.h @@ -26,7 +26,9 @@ * allocate the space "normally" and use the cache management functions * to ensure it is consistent. */ -extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp); +struct device; +extern void *__dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *handle, gfp_t gfp); extern void __dma_free_coherent(size_t size, void *vaddr); extern void __dma_sync(void *vaddr, size_t size, int direction); extern void __dma_sync_page(struct page *page, unsigned long offset, @@ -37,7 +39,7 @@ extern void __dma_sync_page(struct page *page, unsigned long offset, * Cache coherent cores. */ -#define __dma_alloc_coherent(gfp, size, handle) NULL +#define __dma_alloc_coherent(dev, gfp, size, handle) NULL #define __dma_free_coherent(size, addr) ((void)0) #define __dma_sync(addr, size, rw) ((void)0) #define __dma_sync_page(pg, off, sz, rw) ((void)0) diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h index 28fe9d4bae35..c9ff9d75990e 100644 --- a/arch/powerpc/include/asm/pgtable-ppc32.h +++ b/arch/powerpc/include/asm/pgtable-ppc32.h @@ -71,7 +71,11 @@ extern int icache_44x_need_flush; * until mem_init() at which point this becomes the top of the vmalloc * and ioremap space */ +#ifdef CONFIG_NOT_COHERENT_CACHE +#define IOREMAP_TOP ((KVIRT_TOP - CONFIG_CONSISTENT_SIZE) & PAGE_MASK) +#else #define IOREMAP_TOP KVIRT_TOP +#endif /* * Just any arbitrary offset to the start of the vmalloc VM area: the diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c index 53c7788cba78..6b02793dc75b 100644 --- a/arch/powerpc/kernel/dma.c +++ b/arch/powerpc/kernel/dma.c @@ -32,7 +32,7 @@ void *dma_direct_alloc_coherent(struct device *dev, size_t size, { void *ret; #ifdef CONFIG_NOT_COHERENT_CACHE - ret = __dma_alloc_coherent(size, dma_handle, flag); + ret = __dma_alloc_coherent(dev, size, dma_handle, flag); if (ret == NULL) return NULL; *dma_handle += get_dma_direct_offset(dev); diff --git a/arch/powerpc/mm/dma-noncoherent.c b/arch/powerpc/mm/dma-noncoherent.c index b7dc4c19f582..36692f5c9a76 100644 --- a/arch/powerpc/mm/dma-noncoherent.c +++ b/arch/powerpc/mm/dma-noncoherent.c @@ -32,20 +32,21 @@ #include +#include "mmu_decl.h" + /* * This address range defaults to a value that is safe for all * platforms which currently set CONFIG_NOT_COHERENT_CACHE. It * can be further configured for specific applications under * the "Advanced Setup" menu. -Matt */ -#define CONSISTENT_BASE (CONFIG_CONSISTENT_START) -#define CONSISTENT_END (CONFIG_CONSISTENT_START + CONFIG_CONSISTENT_SIZE) +#define CONSISTENT_BASE (IOREMAP_TOP) +#define CONSISTENT_END (CONSISTENT_BASE + CONFIG_CONSISTENT_SIZE) #define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT) /* * This is the page table (2MB) covering uncached, DMA consistent allocations */ -static pte_t *consistent_pte; static DEFINE_SPINLOCK(consistent_lock); /* @@ -148,22 +149,38 @@ static struct ppc_vm_region *ppc_vm_region_find(struct ppc_vm_region *head, unsi * virtual and bus address for that space. */ void * -__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) +__dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp) { struct page *page; struct ppc_vm_region *c; unsigned long order; - u64 mask = 0x00ffffff, limit; /* ISA default */ + u64 mask = ISA_DMA_THRESHOLD, limit; - if (!consistent_pte) { - printk(KERN_ERR "%s: not initialised\n", __func__); - dump_stack(); - return NULL; + if (dev) { + mask = dev->coherent_dma_mask; + + /* + * Sanity check the DMA mask - it must be non-zero, and + * must be able to be satisfied by a DMA allocation. + */ + if (mask == 0) { + dev_warn(dev, "coherent DMA mask is unset\n"); + goto no_page; + } + + if ((~mask) & ISA_DMA_THRESHOLD) { + dev_warn(dev, "coherent DMA mask %#llx is smaller " + "than system GFP_DMA mask %#llx\n", + mask, (unsigned long long)ISA_DMA_THRESHOLD); + goto no_page; + } } + size = PAGE_ALIGN(size); limit = (mask + 1) & ~mask; - if ((limit && size >= limit) || size >= (CONSISTENT_END - CONSISTENT_BASE)) { + if ((limit && size >= limit) || + size >= (CONSISTENT_END - CONSISTENT_BASE)) { printk(KERN_WARNING "coherent allocation too big (requested %#x mask %#Lx)\n", size, mask); return NULL; @@ -171,6 +188,7 @@ __dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) order = get_order(size); + /* Might be useful if we ever have a real legacy DMA zone... */ if (mask != 0xffffffff) gfp |= GFP_DMA; @@ -195,7 +213,6 @@ __dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) gfp & ~(__GFP_DMA | __GFP_HIGHMEM)); if (c) { unsigned long vaddr = c->vm_start; - pte_t *pte = consistent_pte + CONSISTENT_OFFSET(vaddr); struct page *end = page + (1 << order); split_page(page, order); @@ -206,13 +223,10 @@ __dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) *handle = page_to_phys(page); do { - BUG_ON(!pte_none(*pte)); - SetPageReserved(page); - set_pte_at(&init_mm, vaddr, - pte, mk_pte(page, pgprot_noncached(PAGE_KERNEL))); + map_page(vaddr, page_to_phys(page), + pgprot_noncached(PAGE_KERNEL)); page++; - pte++; vaddr += PAGE_SIZE; } while (size -= PAGE_SIZE); @@ -241,8 +255,7 @@ void __dma_free_coherent(size_t size, void *vaddr) { struct ppc_vm_region *c; unsigned long flags, addr; - pte_t *ptep; - + size = PAGE_ALIGN(size); spin_lock_irqsave(&consistent_lock, flags); @@ -258,29 +271,26 @@ void __dma_free_coherent(size_t size, void *vaddr) size = c->vm_end - c->vm_start; } - ptep = consistent_pte + CONSISTENT_OFFSET(c->vm_start); addr = c->vm_start; do { - pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep); + pte_t *ptep; unsigned long pfn; - ptep++; - addr += PAGE_SIZE; - - if (!pte_none(pte) && pte_present(pte)) { - pfn = pte_pfn(pte); - + ptep = pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(addr), + addr), + addr), + addr); + if (!pte_none(*ptep) && pte_present(*ptep)) { + pfn = pte_pfn(*ptep); + pte_clear(&init_mm, addr, ptep); if (pfn_valid(pfn)) { struct page *page = pfn_to_page(pfn); - ClearPageReserved(page); + ClearPageReserved(page); __free_page(page); - continue; } } - - printk(KERN_CRIT "%s: bad page in kernel page table\n", - __func__); + addr += PAGE_SIZE; } while (size -= PAGE_SIZE); flush_tlb_kernel_range(c->vm_start, c->vm_end); @@ -300,42 +310,6 @@ void __dma_free_coherent(size_t size, void *vaddr) } EXPORT_SYMBOL(__dma_free_coherent); -/* - * Initialise the consistent memory allocation. - */ -static int __init dma_alloc_init(void) -{ - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *pte; - int ret = 0; - - do { - pgd = pgd_offset(&init_mm, CONSISTENT_BASE); - pud = pud_alloc(&init_mm, pgd, CONSISTENT_BASE); - pmd = pmd_alloc(&init_mm, pud, CONSISTENT_BASE); - if (!pmd) { - printk(KERN_ERR "%s: no pmd tables\n", __func__); - ret = -ENOMEM; - break; - } - - pte = pte_alloc_kernel(pmd, CONSISTENT_BASE); - if (!pte) { - printk(KERN_ERR "%s: no pte tables\n", __func__); - ret = -ENOMEM; - break; - } - - consistent_pte = pte; - } while (0); - - return ret; -} - -core_initcall(dma_alloc_init); - /* * make an area consistent. */ diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index d3a4e67561fa..579382c163a9 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -387,6 +387,10 @@ void __init mem_init(void) pr_info(" * 0x%08lx..0x%08lx : highmem PTEs\n", PKMAP_BASE, PKMAP_ADDR(LAST_PKMAP)); #endif /* CONFIG_HIGHMEM */ +#ifdef CONFIG_NOT_COHERENT_CACHE + pr_info(" * 0x%08lx..0x%08lx : consistent mem\n", + IOREMAP_TOP, IOREMAP_TOP + CONFIG_CONSISTENT_SIZE); +#endif /* CONFIG_NOT_COHERENT_CACHE */ pr_info(" * 0x%08lx..0x%08lx : early ioremap\n", ioremap_bot, IOREMAP_TOP); pr_info(" * 0x%08lx..0x%08lx : vmalloc & ioremap\n", -- cgit v1.2.2 From 67a433ce278b98f47272726a22537fab7fd99de9 Mon Sep 17 00:00:00 2001 From: Paulius Zaleckas Date: Thu, 28 May 2009 16:42:25 +0300 Subject: Gemini: Fix SRAM/ROM location after memory swap Signed-off-by: Paulius Zaleckas --- arch/arm/mach-gemini/include/mach/hardware.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-gemini/include/mach/hardware.h b/arch/arm/mach-gemini/include/mach/hardware.h index de6752674c05..213a4fcfeb1c 100644 --- a/arch/arm/mach-gemini/include/mach/hardware.h +++ b/arch/arm/mach-gemini/include/mach/hardware.h @@ -15,10 +15,9 @@ /* * Memory Map definitions */ -/* FIXME: Does it really swap SRAM like this? */ #ifdef CONFIG_GEMINI_MEM_SWAP # define GEMINI_DRAM_BASE 0x00000000 -# define GEMINI_SRAM_BASE 0x20000000 +# define GEMINI_SRAM_BASE 0x70000000 #else # define GEMINI_SRAM_BASE 0x00000000 # define GEMINI_DRAM_BASE 0x10000000 -- cgit v1.2.2 From bac4e960b5ce2453d862beaf20e59aa68af3b43a Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 25 May 2009 20:58:00 +0100 Subject: [ARM] barriers: improve xchg, bitops and atomic SMP barriers Mathieu Desnoyers pointed out that the ARM barriers were lacking: - cmpxchg, xchg and atomic add return need memory barriers on architectures which can reorder the relative order in which memory read/writes can be seen between CPUs, which seems to include recent ARM architectures. Those barriers are currently missing on ARM. - test_and_xxx_bit were missing SMP barriers. So put these barriers in. Provide separate atomic_add/atomic_sub operations which do not require barriers. Reported-Reviewed-and-Acked-by: Mathieu Desnoyers Signed-off-by: Russell King --- arch/arm/include/asm/assembler.h | 13 +++++++++ arch/arm/include/asm/atomic.h | 61 ++++++++++++++++++++++++++++++++++------ arch/arm/include/asm/system.h | 3 ++ arch/arm/kernel/entry-armv.S | 5 +--- arch/arm/lib/bitops.h | 2 ++ 5 files changed, 71 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 6116e4893c0a..15f8a092b700 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -114,3 +114,16 @@ .align 3; \ .long 9999b,9001f; \ .previous + +/* + * SMP data memory barrier + */ + .macro smp_dmb +#ifdef CONFIG_SMP +#if __LINUX_ARM_ARCH__ >= 7 + dmb +#elif __LINUX_ARM_ARCH__ == 6 + mcr p15, 0, r0, c7, c10, 5 @ dmb +#endif +#endif + .endm diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h index ee99723b3a6c..16b52f397983 100644 --- a/arch/arm/include/asm/atomic.h +++ b/arch/arm/include/asm/atomic.h @@ -44,11 +44,29 @@ static inline void atomic_set(atomic_t *v, int i) : "cc"); } +static inline void atomic_add(int i, atomic_t *v) +{ + unsigned long tmp; + int result; + + __asm__ __volatile__("@ atomic_add\n" +"1: ldrex %0, [%2]\n" +" add %0, %0, %3\n" +" strex %1, %0, [%2]\n" +" teq %1, #0\n" +" bne 1b" + : "=&r" (result), "=&r" (tmp) + : "r" (&v->counter), "Ir" (i) + : "cc"); +} + static inline int atomic_add_return(int i, atomic_t *v) { unsigned long tmp; int result; + smp_mb(); + __asm__ __volatile__("@ atomic_add_return\n" "1: ldrex %0, [%2]\n" " add %0, %0, %3\n" @@ -59,14 +77,34 @@ static inline int atomic_add_return(int i, atomic_t *v) : "r" (&v->counter), "Ir" (i) : "cc"); + smp_mb(); + return result; } +static inline void atomic_sub(int i, atomic_t *v) +{ + unsigned long tmp; + int result; + + __asm__ __volatile__("@ atomic_sub\n" +"1: ldrex %0, [%2]\n" +" sub %0, %0, %3\n" +" strex %1, %0, [%2]\n" +" teq %1, #0\n" +" bne 1b" + : "=&r" (result), "=&r" (tmp) + : "r" (&v->counter), "Ir" (i) + : "cc"); +} + static inline int atomic_sub_return(int i, atomic_t *v) { unsigned long tmp; int result; + smp_mb(); + __asm__ __volatile__("@ atomic_sub_return\n" "1: ldrex %0, [%2]\n" " sub %0, %0, %3\n" @@ -77,6 +115,8 @@ static inline int atomic_sub_return(int i, atomic_t *v) : "r" (&v->counter), "Ir" (i) : "cc"); + smp_mb(); + return result; } @@ -84,6 +124,8 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new) { unsigned long oldval, res; + smp_mb(); + do { __asm__ __volatile__("@ atomic_cmpxchg\n" "ldrex %1, [%2]\n" @@ -95,6 +137,8 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new) : "cc"); } while (res); + smp_mb(); + return oldval; } @@ -135,6 +179,7 @@ static inline int atomic_add_return(int i, atomic_t *v) return val; } +#define atomic_add(i, v) (void) atomic_add_return(i, v) static inline int atomic_sub_return(int i, atomic_t *v) { @@ -148,6 +193,7 @@ static inline int atomic_sub_return(int i, atomic_t *v) return val; } +#define atomic_sub(i, v) (void) atomic_sub_return(i, v) static inline int atomic_cmpxchg(atomic_t *v, int old, int new) { @@ -187,10 +233,8 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) } #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) -#define atomic_add(i, v) (void) atomic_add_return(i, v) -#define atomic_inc(v) (void) atomic_add_return(1, v) -#define atomic_sub(i, v) (void) atomic_sub_return(i, v) -#define atomic_dec(v) (void) atomic_sub_return(1, v) +#define atomic_inc(v) atomic_add(1, v) +#define atomic_dec(v) atomic_sub(1, v) #define atomic_inc_and_test(v) (atomic_add_return(1, v) == 0) #define atomic_dec_and_test(v) (atomic_sub_return(1, v) == 0) @@ -200,11 +244,10 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) #define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0) -/* Atomic operations are already serializing on ARM */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() +#define smp_mb__before_atomic_dec() smp_mb() +#define smp_mb__after_atomic_dec() smp_mb() +#define smp_mb__before_atomic_inc() smp_mb() +#define smp_mb__after_atomic_inc() smp_mb() #include #endif diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index bd4dc8ed53d5..7fce8f3b391d 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -248,6 +248,8 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size unsigned int tmp; #endif + smp_mb(); + switch (size) { #if __LINUX_ARM_ARCH__ >= 6 case 1: @@ -307,6 +309,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size __bad_xchg(ptr, size), ret = 0; break; } + smp_mb(); return ret; } diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index d662a2f1fd85..83b1da6b7baa 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -815,10 +815,7 @@ __kuser_helper_start: */ __kuser_memory_barrier: @ 0xffff0fa0 - -#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_SMP) - mcr p15, 0, r0, c7, c10, 5 @ dmb -#endif + smp_dmb usr_ret lr .align 5 diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h index 2e787d40d599..c7f2627385e7 100644 --- a/arch/arm/lib/bitops.h +++ b/arch/arm/lib/bitops.h @@ -18,12 +18,14 @@ mov r2, #1 add r1, r1, r0, lsr #3 @ Get byte offset mov r3, r2, lsl r3 @ create mask + smp_dmb 1: ldrexb r2, [r1] ands r0, r2, r3 @ save old value of bit \instr r2, r2, r3 @ toggle bit strexb ip, r2, [r1] cmp ip, #0 bne 1b + smp_dmb cmp r0, #0 movne r0, #1 2: mov pc, lr -- cgit v1.2.2 From ecd322c9b3e4ac70f9f108badde3eb6b99c7993d Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Thu, 28 May 2009 16:07:39 -0400 Subject: [ARM] Add cmpxchg support for ARMv6+ systems (v5) Add cmpxchg/cmpxchg64 support for ARMv6K and ARMv7 systems (original patch from Catalin Marinas ) The cmpxchg and cmpxchg64 functions can be implemented using the LDREX*/STREX* instructions. Since operand lengths other than 32bit are required, the full implementations are only available if the ARMv6K extensions are present (for the LDREXB, LDREXH and LDREXD instructions). For ARMv6, only 32-bits cmpxchg is available. Mathieu : Make cmpxchg_local always available with best implementation for all type sizes (1, 2, 4 bytes). Make cmpxchg64_local always available. Use "Ir" constraint for "old" operand, like atomic.h atomic_cmpxchg does. Change since v3 : - Add "memory" clobbers (thanks to Nicolas Pitre) - removed __asmeq(), only needed for old compilers, very unlikely on ARMv6+. Note : ARMv7-M should eventually be ifdefed-out of cmpxchg64. But it's not supported by the Linux kernel currently. Put back arm < v6 cmpxchg support. Signed-off-by: Mathieu Desnoyers CC: Catalin Marinas CC: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/include/asm/system.h | 173 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 173 insertions(+) (limited to 'arch') diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 7fce8f3b391d..d65b2f5bf41f 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -319,6 +319,12 @@ extern void enable_hlt(void); #include +#if __LINUX_ARM_ARCH__ < 6 + +#ifdef CONFIG_SMP +#error "SMP is not supported on this platform" +#endif + /* * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make * them available. @@ -332,6 +338,173 @@ extern void enable_hlt(void); #include #endif +#else /* __LINUX_ARM_ARCH__ >= 6 */ + +extern void __bad_cmpxchg(volatile void *ptr, int size); + +/* + * cmpxchg only support 32-bits operands on ARMv6. + */ + +static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, + unsigned long new, int size) +{ + unsigned long oldval, res; + + switch (size) { +#ifdef CONFIG_CPU_32v6K + case 1: + do { + asm volatile("@ __cmpxchg1\n" + " ldrexb %1, [%2]\n" + " mov %0, #0\n" + " teq %1, %3\n" + " strexbeq %0, %4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (ptr), "Ir" (old), "r" (new) + : "memory", "cc"); + } while (res); + break; + case 2: + do { + asm volatile("@ __cmpxchg1\n" + " ldrexh %1, [%2]\n" + " mov %0, #0\n" + " teq %1, %3\n" + " strexheq %0, %4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (ptr), "Ir" (old), "r" (new) + : "memory", "cc"); + } while (res); + break; +#endif /* CONFIG_CPU_32v6K */ + case 4: + do { + asm volatile("@ __cmpxchg4\n" + " ldrex %1, [%2]\n" + " mov %0, #0\n" + " teq %1, %3\n" + " strexeq %0, %4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (ptr), "Ir" (old), "r" (new) + : "memory", "cc"); + } while (res); + break; + default: + __bad_cmpxchg(ptr, size); + oldval = 0; + } + + return oldval; +} + +static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old, + unsigned long new, int size) +{ + unsigned long ret; + + smp_mb(); + ret = __cmpxchg(ptr, old, new, size); + smp_mb(); + + return ret; +} + +#define cmpxchg(ptr,o,n) \ + ((__typeof__(*(ptr)))__cmpxchg_mb((ptr), \ + (unsigned long)(o), \ + (unsigned long)(n), \ + sizeof(*(ptr)))) + +static inline unsigned long __cmpxchg_local(volatile void *ptr, + unsigned long old, + unsigned long new, int size) +{ + unsigned long ret; + + switch (size) { +#ifndef CONFIG_CPU_32v6K + case 1: + case 2: + ret = __cmpxchg_local_generic(ptr, old, new, size); + break; +#endif /* !CONFIG_CPU_32v6K */ + default: + ret = __cmpxchg(ptr, old, new, size); + } + + return ret; +} + +#define cmpxchg_local(ptr,o,n) \ + ((__typeof__(*(ptr)))__cmpxchg_local((ptr), \ + (unsigned long)(o), \ + (unsigned long)(n), \ + sizeof(*(ptr)))) + +#ifdef CONFIG_CPU_32v6K + +/* + * Note : ARMv7-M (currently unsupported by Linux) does not support + * ldrexd/strexd. If ARMv7-M is ever supported by the Linux kernel, it should + * not be allowed to use __cmpxchg64. + */ +static inline unsigned long long __cmpxchg64(volatile void *ptr, + unsigned long long old, + unsigned long long new) +{ + register unsigned long long oldval asm("r0"); + register unsigned long long __old asm("r2") = old; + register unsigned long long __new asm("r4") = new; + unsigned long res; + + do { + asm volatile( + " @ __cmpxchg8\n" + " ldrexd %1, %H1, [%2]\n" + " mov %0, #0\n" + " teq %1, %3\n" + " teqeq %H1, %H3\n" + " strexdeq %0, %4, %H4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (ptr), "Ir" (__old), "r" (__new) + : "memory", "cc"); + } while (res); + + return oldval; +} + +static inline unsigned long long __cmpxchg64_mb(volatile void *ptr, + unsigned long long old, + unsigned long long new) +{ + unsigned long long ret; + + smp_mb(); + ret = __cmpxchg64(ptr, old, new); + smp_mb(); + + return ret; +} + +#define cmpxchg64(ptr,o,n) \ + ((__typeof__(*(ptr)))__cmpxchg64_mb((ptr), \ + (unsigned long long)(o), \ + (unsigned long long)(n))) + +#define cmpxchg64_local(ptr,o,n) \ + ((__typeof__(*(ptr)))__cmpxchg64((ptr), \ + (unsigned long long)(o), \ + (unsigned long long)(n))) + +#else /* !CONFIG_CPU_32v6K */ + +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) + +#endif /* CONFIG_CPU_32v6K */ + +#endif /* __LINUX_ARM_ARCH__ >= 6 */ + #endif /* __ASSEMBLY__ */ #define arch_align_stack(x) (x) -- cgit v1.2.2 From 6daad5c6c586bf07528ae5b39e801b204468f907 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 29 May 2009 10:15:08 +0100 Subject: [ARM] update mach-types Signed-off-by: Russell King --- arch/arm/tools/mach-types | 131 ++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 122 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 945e0d237a1d..fec64678a63a 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Mon Mar 23 20:09:01 2009 +# Last update: Fri May 29 10:14:20 2009 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -916,7 +916,7 @@ nxdb500 MACH_NXDB500 NXDB500 905 apf9328 MACH_APF9328 APF9328 906 omap_wipoq MACH_OMAP_WIPOQ OMAP_WIPOQ 907 omap_twip MACH_OMAP_TWIP OMAP_TWIP 908 -palmt650 MACH_PALMT650 PALMT650 909 +treo650 MACH_TREO650 TREO650 909 acumen MACH_ACUMEN ACUMEN 910 xp100 MACH_XP100 XP100 911 fs2410 MACH_FS2410 FS2410 912 @@ -1232,7 +1232,7 @@ ql202b MACH_QL202B QL202B 1226 vpac270 MACH_VPAC270 VPAC270 1227 rd129 MACH_RD129 RD129 1228 htcwizard MACH_HTCWIZARD HTCWIZARD 1229 -xscale_treo680 MACH_XSCALE_TREO680 XSCALE_TREO680 1230 +treo680 MACH_TREO680 TREO680 1230 tecon_tmezon MACH_TECON_TMEZON TECON_TMEZON 1231 zylonite MACH_ZYLONITE ZYLONITE 1233 gene1270 MACH_GENE1270 GENE1270 1234 @@ -1418,10 +1418,10 @@ looxc550 MACH_LOOXC550 LOOXC550 1417 cnty_titan MACH_CNTY_TITAN CNTY_TITAN 1418 app3xx MACH_APP3XX APP3XX 1419 sideoatsgrama MACH_SIDEOATSGRAMA SIDEOATSGRAMA 1420 -palmtreo700p MACH_PALMTREO700P PALMTREO700P 1421 -palmtreo700w MACH_PALMTREO700W PALMTREO700W 1422 -palmtreo750 MACH_PALMTREO750 PALMTREO750 1423 -palmtreo755p MACH_PALMTREO755P PALMTREO755P 1424 +treo700p MACH_TREO700P TREO700P 1421 +treo700w MACH_TREO700W TREO700W 1422 +treo750 MACH_TREO750 TREO750 1423 +treo755p MACH_TREO755P TREO755P 1424 ezreganut9200 MACH_EZREGANUT9200 EZREGANUT9200 1425 sarge MACH_SARGE SARGE 1426 a696 MACH_A696 A696 1427 @@ -1721,7 +1721,7 @@ sapphire MACH_SAPPHIRE SAPPHIRE 1729 csb637xo MACH_CSB637XO CSB637XO 1730 evisiong MACH_EVISIONG EVISIONG 1731 stmp37xx MACH_STMP37XX STMP37XX 1732 -stmp378x MACH_STMP38XX STMP38XX 1733 +stmp378x MACH_STMP378X STMP378X 1733 tnt MACH_TNT TNT 1734 tbxt MACH_TBXT TBXT 1735 playmate MACH_PLAYMATE PLAYMATE 1736 @@ -1817,7 +1817,7 @@ smdkc100 MACH_SMDKC100 SMDKC100 1826 tavorevb MACH_TAVOREVB TAVOREVB 1827 saar MACH_SAAR SAAR 1828 deister_eyecam MACH_DEISTER_EYECAM DEISTER_EYECAM 1829 -at91sam9m10ek MACH_AT91SAM9M10EK AT91SAM9M10EK 1830 +at91sam9m10g45ek MACH_AT91SAM9M10G45EK AT91SAM9M10G45EK 1830 linkstation_produo MACH_LINKSTATION_PRODUO LINKSTATION_PRODUO 1831 hit_b0 MACH_HIT_B0 HIT_B0 1832 adx_rmu MACH_ADX_RMU ADX_RMU 1833 @@ -2132,3 +2132,116 @@ apollo MACH_APOLLO APOLLO 2141 at91cap9stk MACH_AT91CAP9STK AT91CAP9STK 2142 spc300 MACH_SPC300 SPC300 2143 eko MACH_EKO EKO 2144 +ccw9m2443 MACH_CCW9M2443 CCW9M2443 2145 +ccw9m2443js MACH_CCW9M2443JS CCW9M2443JS 2146 +m2m_router_device MACH_M2M_ROUTER_DEVICE M2M_ROUTER_DEVICE 2147 +str9104nas MACH_STAR9104NAS STAR9104NAS 2148 +pca100 MACH_PCA100 PCA100 2149 +z3_dm365_mod_01 MACH_Z3_DM365_MOD_01 Z3_DM365_MOD_01 2150 +hipox MACH_HIPOX HIPOX 2151 +omap3_piteds MACH_OMAP3_PITEDS OMAP3_PITEDS 2152 +bm150r MACH_BM150R BM150R 2153 +tbone MACH_TBONE TBONE 2154 +merlin MACH_MERLIN MERLIN 2155 +falcon MACH_FALCON FALCON 2156 +davinci_da850_evm MACH_DAVINCI_DA850_EVM DAVINCI_DA850_EVM 2157 +s5p6440 MACH_S5P6440 S5P6440 2158 +at91sam9g10ek MACH_AT91SAM9G10EK AT91SAM9G10EK 2159 +omap_4430sdp MACH_OMAP_4430SDP OMAP_4430SDP 2160 +lpc313x MACH_LPC313X LPC313X 2161 +magx_zn5 MACH_MAGX_ZN5 MAGX_ZN5 2162 +magx_em30 MACH_MAGX_EM30 MAGX_EM30 2163 +magx_ve66 MACH_MAGX_VE66 MAGX_VE66 2164 +meesc MACH_MEESC MEESC 2165 +otc570 MACH_OTC570 OTC570 2166 +bcu2412 MACH_BCU2412 BCU2412 2167 +beacon MACH_BEACON BEACON 2168 +actia_tgw MACH_ACTIA_TGW ACTIA_TGW 2169 +e4430 MACH_E4430 E4430 2170 +ql300 MACH_QL300 QL300 2171 +btmavb101 MACH_BTMAVB101 BTMAVB101 2172 +btmawb101 MACH_BTMAWB101 BTMAWB101 2173 +sq201 MACH_SQ201 SQ201 2174 +quatro45xx MACH_QUATRO45XX QUATRO45XX 2175 +openpad MACH_OPENPAD OPENPAD 2176 +tx25 MACH_TX25 TX25 2177 +omap3_torpedo MACH_OMAP3_TORPEDO OMAP3_TORPEDO 2178 +htcraphael_k MACH_HTCRAPHAEL_K HTCRAPHAEL_K 2179 +lal43 MACH_LAL43 LAL43 2181 +htcraphael_cdma500 MACH_HTCRAPHAEL_CDMA500 HTCRAPHAEL_CDMA500 2182 +anw6410 MACH_ANW6410 ANW6410 2183 +htcprophet MACH_HTCPROPHET HTCPROPHET 2185 +cfa_10022 MACH_CFA_10022 CFA_10022 2186 +imx27_visstrim_m10 MACH_IMX27_VISSTRIM_M10 IMX27_VISSTRIM_M10 2187 +px2imx27 MACH_PX2IMX27 PX2IMX27 2188 +stm3210e_eval MACH_STM3210E_EVAL STM3210E_EVAL 2189 +dvs10 MACH_DVS10 DVS10 2190 +portuxg20 MACH_PORTUXG20 PORTUXG20 2191 +arm_spv MACH_ARM_SPV ARM_SPV 2192 +smdkc110 MACH_SMDKC110 SMDKC110 2193 +cabespresso MACH_CABESPRESSO CABESPRESSO 2194 +hmc800 MACH_HMC800 HMC800 2195 +sholes MACH_SHOLES SHOLES 2196 +btmxc31 MACH_BTMXC31 BTMXC31 2197 +dt501 MACH_DT501 DT501 2198 +ktx MACH_KTX KTX 2199 +omap3517evm MACH_OMAP3517EVM OMAP3517EVM 2200 +netspace_v2 MACH_NETSPACE_V2 NETSPACE_V2 2201 +netspace_max_v2 MACH_NETSPACE_MAX_V2 NETSPACE_MAX_V2 2202 +d2net_v2 MACH_D2NET_V2 D2NET_V2 2203 +net2big_v2 MACH_NET2BIG_V2 NET2BIG_V2 2204 +net4big_v2 MACH_NET4BIG_V2 NET4BIG_V2 2205 +net5big_v2 MACH_NET5BIG_V2 NET5BIG_V2 2206 +endb2443 MACH_ENDB2443 ENDB2443 2207 +inetspace_v2 MACH_INETSPACE_V2 INETSPACE_V2 2208 +tros MACH_TROS TROS 2209 +pelco_homer MACH_PELCO_HOMER PELCO_HOMER 2210 +ofsp8 MACH_OFSP8 OFSP8 2211 +at91sam9g45ekes MACH_AT91SAM9G45EKES AT91SAM9G45EKES 2212 +guf_cupid MACH_GUF_CUPID GUF_CUPID 2213 +eab1r MACH_EAB1R EAB1R 2214 +desirec MACH_DESIREC DESIREC 2215 +cordoba MACH_CORDOBA CORDOBA 2216 +irvine MACH_IRVINE IRVINE 2217 +sff772 MACH_SFF772 SFF772 2218 +pelco_milano MACH_PELCO_MILANO PELCO_MILANO 2219 +pc7302 MACH_PC7302 PC7302 2220 +bip6000 MACH_BIP6000 BIP6000 2221 +silvermoon MACH_SILVERMOON SILVERMOON 2222 +vc0830 MACH_VC0830 VC0830 2223 +dt430 MACH_DT430 DT430 2224 +ji42pf MACH_JI42PF JI42PF 2225 +gnet_ksm MACH_GNET_KSM GNET_KSM 2226 +gnet_sgm MACH_GNET_SGM GNET_SGM 2227 +gnet_sgr MACH_GNET_SGR GNET_SGR 2228 +omap3_icetekevm MACH_OMAP3_ICETEKEVM OMAP3_ICETEKEVM 2229 +pnp MACH_PNP PNP 2230 +ctera_2bay_k MACH_CTERA_2BAY_K CTERA_2BAY_K 2231 +ctera_2bay_u MACH_CTERA_2BAY_U CTERA_2BAY_U 2232 +sas_c MACH_SAS_C SAS_C 2233 +vma2315 MACH_VMA2315 VMA2315 2234 +vcs MACH_VCS VCS 2235 +spear600 MACH_SPEAR600 SPEAR600 2236 +spear300 MACH_SPEAR300 SPEAR300 2237 +spear1300 MACH_SPEAR1300 SPEAR1300 2238 +lilly1131 MACH_LILLY1131 LILLY1131 2239 +arvoo_ax301 MACH_ARVOO_AX301 ARVOO_AX301 2240 +mapphone MACH_MAPPHONE MAPPHONE 2241 +legend MACH_LEGEND LEGEND 2242 +salsa MACH_SALSA SALSA 2243 +lounge MACH_LOUNGE LOUNGE 2244 +vision MACH_VISION VISION 2245 +vmb20 MACH_VMB20 VMB20 2246 +hy2410 MACH_HY2410 HY2410 2247 +hy9315 MACH_HY9315 HY9315 2248 +bullwinkle MACH_BULLWINKLE BULLWINKLE 2249 +arm_ultimator2 MACH_ARM_ULTIMATOR2 ARM_ULTIMATOR2 2250 +vs_v210 MACH_VS_V210 VS_V210 2252 +vs_v212 MACH_VS_V212 VS_V212 2253 +hmt MACH_HMT HMT 2254 +suen3 MACH_SUEN3 SUEN3 2255 +vesper MACH_VESPER VESPER 2256 +str9 MACH_STR9 STR9 2257 +omap3_wl_ff MACH_OMAP3_WL_FF OMAP3_WL_FF 2258 +simcom MACH_SIMCOM SIMCOM 2259 +mcwebio MACH_MCWEBIO MCWEBIO 2260 -- cgit v1.2.2 From c3dc5bec05a2ae03a72ef82e321d77fb549d951c Mon Sep 17 00:00:00 2001 From: Oskar Schirmer Date: Thu, 28 May 2009 14:34:31 -0700 Subject: flat: fix data sections alignment The flat loader uses an architecture's flat_stack_align() to align the stack but assumes word-alignment is enough for the data sections. However, on the Xtensa S6000 we have registers up to 128bit width which can be used from userspace and therefor need userspace stack and data-section alignment of at least this size. This patch drops flat_stack_align() and uses the same alignment that is required for slab caches, ARCH_SLAB_MINALIGN, or wordsize if it's not defined by the architecture. It also fixes m32r which was obviously kaput, aligning an uninitialized stack entry instead of the stack pointer. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Oskar Schirmer Cc: David Howells Cc: Russell King Cc: Bryan Wu Cc: Geert Uytterhoeven Acked-by: Paul Mundt Cc: Greg Ungerer Signed-off-by: Johannes Weiner Acked-by: Mike Frysinger Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/include/asm/flat.h | 3 --- arch/blackfin/include/asm/flat.h | 1 - arch/h8300/include/asm/flat.h | 1 - arch/m32r/include/asm/flat.h | 1 - arch/m68k/include/asm/flat.h | 1 - arch/sh/include/asm/flat.h | 1 - 6 files changed, 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/flat.h b/arch/arm/include/asm/flat.h index 1d77e51907f6..59426a4595c9 100644 --- a/arch/arm/include/asm/flat.h +++ b/arch/arm/include/asm/flat.h @@ -5,9 +5,6 @@ #ifndef __ARM_FLAT_H__ #define __ARM_FLAT_H__ -/* An odd number of words will be pushed after this alignment, so - deliberately misalign the value. */ -#define flat_stack_align(sp) sp = (void *)(((unsigned long)(sp) - 4) | 4) #define flat_argvp_envp_on_stack() 1 #define flat_old_ram_flag(flags) (flags) #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) diff --git a/arch/blackfin/include/asm/flat.h b/arch/blackfin/include/asm/flat.h index e70074e05f4e..733a178d782d 100644 --- a/arch/blackfin/include/asm/flat.h +++ b/arch/blackfin/include/asm/flat.h @@ -10,7 +10,6 @@ #include -#define flat_stack_align(sp) /* nothing needed */ #define flat_argvp_envp_on_stack() 0 #define flat_old_ram_flag(flags) (flags) diff --git a/arch/h8300/include/asm/flat.h b/arch/h8300/include/asm/flat.h index 2a873508a9a1..bd12b31b90e6 100644 --- a/arch/h8300/include/asm/flat.h +++ b/arch/h8300/include/asm/flat.h @@ -5,7 +5,6 @@ #ifndef __H8300_FLAT_H__ #define __H8300_FLAT_H__ -#define flat_stack_align(sp) /* nothing needed */ #define flat_argvp_envp_on_stack() 1 #define flat_old_ram_flag(flags) 1 #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) diff --git a/arch/m32r/include/asm/flat.h b/arch/m32r/include/asm/flat.h index d851cf0c4aa5..5d711c4688fb 100644 --- a/arch/m32r/include/asm/flat.h +++ b/arch/m32r/include/asm/flat.h @@ -12,7 +12,6 @@ #ifndef __ASM_M32R_FLAT_H #define __ASM_M32R_FLAT_H -#define flat_stack_align(sp) (*sp += (*sp & 3 ? (4 - (*sp & 3)): 0)) #define flat_argvp_envp_on_stack() 0 #define flat_old_ram_flag(flags) (flags) #define flat_set_persistent(relval, p) 0 diff --git a/arch/m68k/include/asm/flat.h b/arch/m68k/include/asm/flat.h index 814b5174a8e0..a0e290793978 100644 --- a/arch/m68k/include/asm/flat.h +++ b/arch/m68k/include/asm/flat.h @@ -5,7 +5,6 @@ #ifndef __M68KNOMMU_FLAT_H__ #define __M68KNOMMU_FLAT_H__ -#define flat_stack_align(sp) /* nothing needed */ #define flat_argvp_envp_on_stack() 1 #define flat_old_ram_flag(flags) (flags) #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) diff --git a/arch/sh/include/asm/flat.h b/arch/sh/include/asm/flat.h index d3b2b4f109e3..5d84df5e27f6 100644 --- a/arch/sh/include/asm/flat.h +++ b/arch/sh/include/asm/flat.h @@ -12,7 +12,6 @@ #ifndef __ASM_SH_FLAT_H #define __ASM_SH_FLAT_H -#define flat_stack_align(sp) /* nothing needed */ #define flat_argvp_envp_on_stack() 0 #define flat_old_ram_flag(flags) (flags) #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) -- cgit v1.2.2 From 32b154c0b0bae2879bf4e549d861caf1759a3546 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Thu, 28 May 2009 14:34:37 -0700 Subject: x86: ignore VM_LOCKED when determining if hugetlb-backed page tables can be shared or not Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13302 On x86 and x86-64, it is possible that page tables are shared beween shared mappings backed by hugetlbfs. As part of this, page_table_shareable() checks a pair of vma->vm_flags and they must match if they are to be shared. All VMA flags are taken into account, including VM_LOCKED. The problem is that VM_LOCKED is cleared on fork(). When a process with a shared memory segment forks() to exec() a helper, there will be shared VMAs with different flags. The impact is that the shared segment is sometimes considered shareable and other times not, depending on what process is checking. What happens is that the segment page tables are being shared but the count is inaccurate depending on the ordering of events. As the page tables are freed with put_page(), bad pmd's are found when some of the children exit. The hugepage counters also get corrupted and the Total and Free count will no longer match even when all the hugepage-backed regions are freed. This requires a reboot of the machine to "fix". This patch addresses the problem by comparing all flags except VM_LOCKED when deciding if pagetables should be shared or not for hugetlbfs-backed mapping. Signed-off-by: Mel Gorman Acked-by: Hugh Dickins Cc: Ingo Molnar Cc: Cc: Lee Schermerhorn Cc: KOSAKI Motohiro Cc: Cc: Eric B Munson Cc: Adam Litke Cc: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86/mm/hugetlbpage.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c index 8f307d914c2e..f46c340727b8 100644 --- a/arch/x86/mm/hugetlbpage.c +++ b/arch/x86/mm/hugetlbpage.c @@ -26,12 +26,16 @@ static unsigned long page_table_shareable(struct vm_area_struct *svma, unsigned long sbase = saddr & PUD_MASK; unsigned long s_end = sbase + PUD_SIZE; + /* Allow segments to share if only one is marked locked */ + unsigned long vm_flags = vma->vm_flags & ~VM_LOCKED; + unsigned long svm_flags = svma->vm_flags & ~VM_LOCKED; + /* * match the virtual addresses, permission and the alignment of the * page table page. */ if (pmd_index(addr) != pmd_index(saddr) || - vma->vm_flags != svma->vm_flags || + vm_flags != svm_flags || sbase < svma->vm_start || svma->vm_end < s_end) return 0; -- cgit v1.2.2 From 6373fffc5d555caf3acf7c5796cec9820aaf7479 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 29 May 2009 16:12:02 -0700 Subject: sparc64: Fix section attribute warnings. CSUM copy to/from user assembler was missing allocatable and executable attributes for .fixup Signed-off-by: David S. Miller --- arch/sparc/lib/csum_copy_from_user.S | 2 +- arch/sparc/lib/csum_copy_to_user.S | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc/lib/csum_copy_from_user.S b/arch/sparc/lib/csum_copy_from_user.S index a22eddbe5dba..e0304e6a2242 100644 --- a/arch/sparc/lib/csum_copy_from_user.S +++ b/arch/sparc/lib/csum_copy_from_user.S @@ -5,7 +5,7 @@ #define EX_LD(x) \ 98: x; \ - .section .fixup; \ + .section .fixup, "ax"; \ .align 4; \ 99: retl; \ mov -1, %o0; \ diff --git a/arch/sparc/lib/csum_copy_to_user.S b/arch/sparc/lib/csum_copy_to_user.S index d5b12f441f02..afd01acc587c 100644 --- a/arch/sparc/lib/csum_copy_to_user.S +++ b/arch/sparc/lib/csum_copy_to_user.S @@ -5,7 +5,7 @@ #define EX_ST(x) \ 98: x; \ - .section .fixup; \ + .section .fixup,"ax"; \ .align 4; \ 99: retl; \ mov -1, %o0; \ -- cgit v1.2.2 From 61c8c67e3ad67ea1d1360f2e88688bd942834756 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 26 May 2009 14:58:39 -0700 Subject: acpi-cpufreq: fix printk typo and indentation Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 208ecf6643df..54b6de2cd947 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -693,8 +693,8 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE && policy->cpuinfo.transition_latency > 20 * 1000) { policy->cpuinfo.transition_latency = 20 * 1000; - printk_once(KERN_INFO "Capping off P-state tranision" - " latency at 20 uS\n"); + printk_once(KERN_INFO + "P-state transition latency capped at 20 uS\n"); } /* table init */ -- cgit v1.2.2 From 60e59f68824102c87e64c5f51c4e57c0b8a61e46 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sun, 24 May 2009 20:34:10 +0000 Subject: powerpc/pmac: Update PowerMac 32-bit defconfig This mostly adds back AppleTouch support and adds CONFIG_HIGHMEM by default. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/pmac32_defconfig | 278 ++++++++++++++++++++++++---------- 1 file changed, 195 insertions(+), 83 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig index 5339bb44cce9..ea8870a34482 100644 --- a/arch/powerpc/configs/pmac32_defconfig +++ b/arch/powerpc/configs/pmac32_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Tue Nov 11 19:36:51 2008 +# Linux kernel version: 2.6.30-rc7 +# Mon May 25 14:53:25 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y @@ -43,7 +44,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -52,12 +53,14 @@ CONFIG_OF=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set CONFIG_HIBERNATE_32=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -72,14 +75,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -88,23 +101,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -114,10 +131,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y @@ -127,10 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -138,11 +157,8 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set -CONFIG_LSF=y CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -158,14 +174,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y CONFIG_FREEZER=y # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -178,7 +191,9 @@ CONFIG_PPC_PMAC=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set CONFIG_PPC_NATIVE=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -212,11 +227,12 @@ CONFIG_CPU_FREQ_PMAC=y CONFIG_PPC601_SYNC_FIX=y # CONFIG_TAU is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options # -# CONFIG_HIGHMEM is not set +CONFIG_HIGHMEM=y CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -239,6 +255,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -250,12 +267,17 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_MIGRATION is not set -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -288,6 +310,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set CONFIG_PCCARD=m # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=m @@ -397,6 +421,8 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set +CONFIG_NETFILTER_XT_TARGET_HL=m +# CONFIG_NETFILTER_XT_TARGET_LED is not set CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -405,6 +431,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set CONFIG_NETFILTER_XT_MATCH_COMMENT=m # CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -415,6 +442,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -478,17 +506,15 @@ CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m +CONFIG_IP_DCCP_CCID3=y # CONFIG_IP_DCCP_CCID3_DEBUG is not set CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +CONFIG_IP_DCCP_TFRC_LIB=y # # DCCP Kernel Hacking @@ -508,13 +534,16 @@ CONFIG_IP_DCCP_TFRC_LIB=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set CONFIG_IRDA=m @@ -577,8 +606,6 @@ CONFIG_BT_HIDP=m # # Bluetooth device drivers # -CONFIG_BT_HCIUSB=m -# CONFIG_BT_HCIUSB_SCO is not set # CONFIG_BT_HCIBTUSB is not set # CONFIG_BT_HCIUART is not set CONFIG_BT_HCIBCM203X=m @@ -590,31 +617,27 @@ CONFIG_BT_HCIBFUSB=m # CONFIG_BT_HCIBTUART is not set # CONFIG_BT_HCIVHCI is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y CONFIG_CFG80211=m -CONFIG_NL80211=y +# CONFIG_CFG80211_REG_DEBUG is not set CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set CONFIG_MAC80211=m # # Rate control algorithm selection # -CONFIG_MAC80211_RC_PID=y -# CONFIG_MAC80211_RC_MINSTREL is not set -CONFIG_MAC80211_RC_DEFAULT_PID=y -# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set -CONFIG_MAC80211_RC_DEFAULT="pid" +CONFIG_MAC80211_RC_MINSTREL=y +# CONFIG_MAC80211_RC_DEFAULT_PID is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel" # CONFIG_MAC80211_MESH is not set CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set # CONFIG_MAC80211_DEBUG_MENU is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -662,17 +685,27 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set @@ -684,7 +717,6 @@ CONFIG_BLK_DEV_IDECS=m CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -CONFIG_BLK_DEV_IDESCSI=y # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -714,6 +746,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set @@ -728,7 +761,6 @@ CONFIG_BLK_DEV_SL82C105=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDE_PMAC=y CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y -CONFIG_BLK_DEV_IDEDMA_PMAC=y CONFIG_BLK_DEV_IDEDMA=y # @@ -772,6 +804,7 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -791,8 +824,12 @@ CONFIG_SCSI_AIC7XXX_OLD=m # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -822,6 +859,7 @@ CONFIG_SCSI_MAC53C94=y # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m @@ -881,6 +919,7 @@ CONFIG_THERM_ADT746X=m # CONFIG_ANSLCD is not set CONFIG_PMAC_RACKMETER=m CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -898,6 +937,8 @@ CONFIG_BMAC=y CONFIG_SUNGEM=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -913,7 +954,6 @@ CONFIG_PCNET32=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -923,6 +963,7 @@ CONFIG_PCNET32=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set @@ -935,6 +976,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -945,18 +987,20 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -966,6 +1010,7 @@ CONFIG_NETDEV_10000=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -974,20 +1019,11 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set CONFIG_WLAN_80211=y # CONFIG_PCMCIA_RAYCS is not set -# CONFIG_IPW2100 is not set -# CONFIG_IPW2200 is not set # CONFIG_LIBERTAS is not set # CONFIG_LIBERTAS_THINFIRM is not set # CONFIG_AIRO is not set -CONFIG_HERMES=m -CONFIG_APPLE_AIRPORT=m -# CONFIG_PLX_HERMES is not set -# CONFIG_TMD_HERMES is not set -# CONFIG_NORTEL_HERMES is not set -CONFIG_PCI_HERMES=m -CONFIG_PCMCIA_HERMES=m -# CONFIG_PCMCIA_SPECTRUM is not set # CONFIG_ATMEL is not set +# CONFIG_AT76C50X_USB is not set # CONFIG_AIRO_CS is not set # CONFIG_PCMCIA_WL3501 is not set CONFIG_PRISM54=m @@ -997,15 +1033,17 @@ CONFIG_PRISM54=m # CONFIG_RTL8187 is not set # CONFIG_ADM8211 is not set # CONFIG_MAC80211_HWSIM is not set +# CONFIG_MWL8K is not set CONFIG_P54_COMMON=m # CONFIG_P54_USB is not set # CONFIG_P54_PCI is not set +CONFIG_P54_LEDS=y # CONFIG_ATH5K is not set # CONFIG_ATH9K is not set -# CONFIG_IWLCORE is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_IWLAGN is not set -# CONFIG_IWL3945 is not set +# CONFIG_AR9170_USB is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_IWLWIFI is not set # CONFIG_HOSTAP is not set CONFIG_B43=m CONFIG_B43_PCI_AUTOSELECT=y @@ -1025,6 +1063,19 @@ CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y # CONFIG_B43LEGACY_PIO_MODE is not set # CONFIG_ZD1211RW is not set # CONFIG_RT2X00 is not set +CONFIG_HERMES=m +CONFIG_HERMES_CACHE_FW_ON_INIT=y +CONFIG_APPLE_AIRPORT=m +# CONFIG_PLX_HERMES is not set +# CONFIG_TMD_HERMES is not set +# CONFIG_NORTEL_HERMES is not set +CONFIG_PCI_HERMES=m +CONFIG_PCMCIA_HERMES=m +# CONFIG_PCMCIA_SPECTRUM is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -1036,6 +1087,7 @@ CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y CONFIG_USB_USBNET=m CONFIG_USB_NET_AX8817X=m CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_CDC_EEM is not set # CONFIG_USB_NET_DM9601 is not set # CONFIG_USB_NET_SMSC95XX is not set # CONFIG_USB_NET_GL620A is not set @@ -1099,7 +1151,7 @@ CONFIG_INPUT_KEYBOARD=y CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_APPLETOUCH is not set +CONFIG_MOUSE_APPLETOUCH=y # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set @@ -1150,10 +1202,13 @@ CONFIG_SERIAL_PMACZILOG_TTYS=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_NVRAM=y CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -1232,12 +1287,9 @@ CONFIG_I2C_POWERMAC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1259,11 +1311,11 @@ CONFIG_BATTERY_PMU=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y CONFIG_SSB=m CONFIG_SSB_SPROM=y CONFIG_SSB_PCIHOST_POSSIBLE=y @@ -1281,18 +1333,13 @@ CONFIG_SSB_DRIVER_PCICORE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1390,6 +1437,7 @@ CONFIG_FB_ATY_BACKLIGHT=y # CONFIG_FB_KYRO is not set CONFIG_FB_3DFX=y # CONFIG_FB_3DFX_ACCEL is not set +CONFIG_FB_3DFX_I2C=y # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set @@ -1399,12 +1447,14 @@ CONFIG_FB_3DFX=y # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_ILI9320 is not set # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_CORGI is not set +CONFIG_BACKLIGHT_GENERIC=y # # Display device support @@ -1444,11 +1494,13 @@ CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_HRTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y CONFIG_SND_DRIVERS=y CONFIG_SND_DUMMY=m # CONFIG_SND_VIRMIDI is not set @@ -1486,6 +1538,8 @@ CONFIG_SND_PCI=y # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1551,28 +1605,31 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y +CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_TOPSEED=y # CONFIG_THRUSTMASTER_FF is not set # CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y @@ -1603,6 +1660,7 @@ CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_HCD_PPC_OF is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -1625,24 +1683,23 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set -CONFIG_USB_STORAGE_ONETOUCH=y +CONFIG_USB_STORAGE_ONETOUCH=m # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1665,7 +1722,7 @@ CONFIG_USB_EZUSB=y # CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CP210X is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set @@ -1701,15 +1758,19 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y # CONFIG_USB_SERIAL_NAVMAN is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set # CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set # CONFIG_USB_SERIAL_DEBUG is not set # @@ -1726,7 +1787,6 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set CONFIG_USB_APPLEDISPLAY=m @@ -1738,6 +1798,11 @@ CONFIG_USB_APPLEDISPLAY=m # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1748,7 +1813,9 @@ CONFIG_LEDS_CLASS=y # LED drivers # # CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1759,11 +1826,16 @@ CONFIG_LEDS_TRIGGER_IDE_DISK=y # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1774,6 +1846,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set @@ -1783,7 +1856,9 @@ CONFIG_EXT4_FS_XATTR=y # CONFIG_EXT4_FS_POSIX_ACL is not set # CONFIG_EXT4_FS_SECURITY is not set CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -1792,6 +1867,7 @@ CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1800,6 +1876,11 @@ CONFIG_INOTIFY_USER=y CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1831,10 +1912,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set CONFIG_HFS_FS=m @@ -1843,6 +1921,7 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1851,6 +1930,7 @@ CONFIG_HFSPLUS_FS=m # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1868,7 +1948,6 @@ CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1940,11 +2019,13 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_CRC_T10DIF=y @@ -1954,15 +2035,18 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1973,13 +2057,16 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set @@ -1994,6 +2081,7 @@ CONFIG_SCHEDSTATS=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_HIGHMEM is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set @@ -2001,6 +2089,7 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -2009,7 +2098,14 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -2017,12 +2113,19 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_CODE_PATCHING_SELFTEST is not set @@ -2033,6 +2136,7 @@ CONFIG_XMON_DEFAULT=y CONFIG_XMON_DISASSEMBLY=y CONFIG_DEBUGGER=y CONFIG_IRQSTACKS=y +# CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set CONFIG_BOOTX_TEXT=y # CONFIG_PPC_EARLY_DEBUG is not set @@ -2051,13 +2155,20 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set @@ -2127,6 +2238,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # -- cgit v1.2.2 From eb5f4ca9536ba297c98721ecbbdf41ec5b987bd5 Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Mon, 1 Jun 2009 09:19:37 +0100 Subject: [ARM] 5534/1: kmalloc must return a cache line aligned buffer Define ARCH_KMALLOC_MINALIGN in asm/cache.h At the request of Russell also move ARCH_SLAB_MINALIGN to this file. Signed-off-by: Martin Fuzzey Signed-off-by: Russell King --- arch/arm/include/asm/cache.h | 16 ++++++++++++++++ arch/arm/include/asm/page.h | 7 ------- 2 files changed, 16 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/cache.h b/arch/arm/include/asm/cache.h index cb7a9e97fd7e..feaa75f0013e 100644 --- a/arch/arm/include/asm/cache.h +++ b/arch/arm/include/asm/cache.h @@ -7,4 +7,20 @@ #define L1_CACHE_SHIFT 5 #define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) +/* + * Memory returned by kmalloc() may be used for DMA, so we must make + * sure that all such allocations are cache aligned. Otherwise, + * unrelated code may cause parts of the buffer to be read into the + * cache before the transfer is done, causing old data to be seen by + * the CPU. + */ +#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES + +/* + * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers. + */ +#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5) +#define ARCH_SLAB_MINALIGN 8 +#endif + #endif diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index e6eb8a67b807..7b522770f29d 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -202,13 +202,6 @@ typedef struct page *pgtable_t; (((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \ VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) -/* - * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers. - */ -#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5) -#define ARCH_SLAB_MINALIGN 8 -#endif - #include #endif -- cgit v1.2.2 From 1946d6ef9d7bd4ba97094fe6eb68a9b877bde6b7 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 1 Jun 2009 12:50:33 +0100 Subject: [ARM] ARMv7 errata: only apply fixes when running on applicable CPU Currently, whenever an erratum workaround is enabled, it will be applied whether or not the erratum is relevent for the CPU. This patch changes this - we check the variant and revision fields in the main ID register to determine which errata to apply. We also avoid re-applying erratum 460075 if it has already been applied. Applying this fix in non-secure mode results in the kernel failing to boot (or even do anything.) This fixes booting on some ARMv7 based platforms which otherwise silently fail. Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/proc-v7.S | 36 +++++++++++++++++++++++++----------- 1 file changed, 25 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 3397f1e64d76..a08d9d2380d3 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -184,23 +184,37 @@ __v7_setup: stmia r12, {r0-r5, r7, r9, r11, lr} bl v7_flush_dcache_all ldmia r12, {r0-r5, r7, r9, r11, lr} + + mrc p15, 0, r0, c0, c0, 0 @ read main ID register + and r10, r0, #0xff000000 @ ARM? + teq r10, #0x41000000 + bne 2f + and r5, r0, #0x00f00000 @ variant + and r6, r0, #0x0000000f @ revision + orr r0, r6, r5, lsr #20-4 @ combine variant and revision + #ifdef CONFIG_ARM_ERRATA_430973 - mrc p15, 0, r10, c1, c0, 1 @ read aux control register - orr r10, r10, #(1 << 6) @ set IBE to 1 - mcr p15, 0, r10, c1, c0, 1 @ write aux control register + teq r5, #0x00100000 @ only present in r1p* + mrceq p15, 0, r10, c1, c0, 1 @ read aux control register + orreq r10, r10, #(1 << 6) @ set IBE to 1 + mcreq p15, 0, r10, c1, c0, 1 @ write aux control register #endif #ifdef CONFIG_ARM_ERRATA_458693 - mrc p15, 0, r10, c1, c0, 1 @ read aux control register - orr r10, r10, #(1 << 5) @ set L1NEON to 1 - orr r10, r10, #(1 << 9) @ set PLDNOP to 1 - mcr p15, 0, r10, c1, c0, 1 @ write aux control register + teq r0, #0x20 @ only present in r2p0 + mrceq p15, 0, r10, c1, c0, 1 @ read aux control register + orreq r10, r10, #(1 << 5) @ set L1NEON to 1 + orreq r10, r10, #(1 << 9) @ set PLDNOP to 1 + mcreq p15, 0, r10, c1, c0, 1 @ write aux control register #endif #ifdef CONFIG_ARM_ERRATA_460075 - mrc p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register - orr r10, r10, #(1 << 22) @ set the Write Allocate disable bit - mcr p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register + teq r0, #0x20 @ only present in r2p0 + mrceq p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register + tsteq r10, #1 << 22 + orreq r10, r10, #(1 << 22) @ set the Write Allocate disable bit + mcreq p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register #endif - mov r10, #0 + +2: mov r10, #0 #ifdef HARVARD_CACHE mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate #endif -- cgit v1.2.2 From 6b4bfb87b638a4f114dfb6f72f4ac1be88a4ebe4 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Tue, 26 May 2009 22:31:46 +0530 Subject: mx[23]: don't put clock lookups in __initdata MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Remove the __initdata annotation for the clock lookups, since they will be needed when loading modules which use clk_get(). Tested-by: Agustín Ferrín Pozuelo Signed-off-by: Rabin Vincent Signed-off-by: Sascha Hauer --- arch/arm/mach-mx2/clock_imx21.c | 2 +- arch/arm/mach-mx2/clock_imx27.c | 2 +- arch/arm/mach-mx3/clock-imx35.c | 2 +- arch/arm/mach-mx3/clock.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c index 999d013e06e3..e4b08ca804ea 100644 --- a/arch/arm/mach-mx2/clock_imx21.c +++ b/arch/arm/mach-mx2/clock_imx21.c @@ -890,7 +890,7 @@ static struct clk clko_clk = { .con_id = n, \ .clk = &c, \ }, -static struct clk_lookup lookups[] __initdata = { +static struct clk_lookup lookups[] = { /* It's unlikely that any driver wants one of them directly: _REGISTER_CLOCK(NULL, "ckih", ckih_clk) _REGISTER_CLOCK(NULL, "ckil", ckil_clk) diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c index 3f7280c490f0..2c971442f3f2 100644 --- a/arch/arm/mach-mx2/clock_imx27.c +++ b/arch/arm/mach-mx2/clock_imx27.c @@ -621,7 +621,7 @@ DEFINE_CLOCK1(csi_clk, 0, 0, 0, parent, &csi_clk1, &per4_clk); .clk = &c, \ }, -static struct clk_lookup lookups[] __initdata = { +static struct clk_lookup lookups[] = { _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c index 53a112d4e04a..3c1e06f56dd6 100644 --- a/arch/arm/mach-mx3/clock-imx35.c +++ b/arch/arm/mach-mx3/clock-imx35.c @@ -404,7 +404,7 @@ DEFINE_CLOCK(gpu2d_clk, 0, CCM_CGR3, 4, NULL, NULL); .clk = &c, \ }, -static struct clk_lookup lookups[] __initdata = { +static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "asrc", asrc_clk) _REGISTER_CLOCK(NULL, "ata", ata_clk) _REGISTER_CLOCK(NULL, "audmux", audmux_clk) diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c index 9957a11533a4..a68fcf981edf 100644 --- a/arch/arm/mach-mx3/clock.c +++ b/arch/arm/mach-mx3/clock.c @@ -516,7 +516,7 @@ DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk); .clk = &c, \ }, -static struct clk_lookup lookups[] __initdata = { +static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "emi", emi_clk) _REGISTER_CLOCK(NULL, "cspi", cspi1_clk) _REGISTER_CLOCK(NULL, "cspi", cspi2_clk) -- cgit v1.2.2 From d81e77f041881d8d91c767b8c84f9068290b10c6 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Mon, 25 May 2009 16:50:10 +0000 Subject: [ARM] pxa/imote2: fix UCAM sensor board ADC model number Signed-off-by: Jonathan Cameron Signed-off-by: Eric Miao --- arch/arm/mach-pxa/imote2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c index 2121309b2474..2b27336c29f1 100644 --- a/arch/arm/mach-pxa/imote2.c +++ b/arch/arm/mach-pxa/imote2.c @@ -412,7 +412,7 @@ static struct platform_device imote2_flash_device = { */ static struct i2c_board_info __initdata imote2_i2c_board_info[] = { { /* UCAM sensor board */ - .type = "max1238", + .type = "max1239", .addr = 0x35, }, { /* ITS400 Sensor board only */ .type = "max1363", -- cgit v1.2.2 From 1257629b0712a0a68a24c532a05a4cd23e3f7565 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 26 May 2009 22:03:32 +0200 Subject: [ARM] pxa: fix pxa27x_udc default pullup GPIO Currently, pxa27x_udc tries to use GPIO 0 as D+ pullup if not explicitly configured. Default to an invalid GPIO (-1) instead. Signed-off-by: Philipp Zabel Acked-by: Robert Jarzmik Signed-off-by: Eric Miao --- arch/arm/mach-pxa/devices.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index d245e59c51b1..29970f703f3c 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -72,7 +72,10 @@ void __init pxa_set_mci_info(struct pxamci_platform_data *info) } -static struct pxa2xx_udc_mach_info pxa_udc_info; +static struct pxa2xx_udc_mach_info pxa_udc_info = { + .gpio_pullup = -1, + .gpio_vbus = -1, +}; void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info) { -- cgit v1.2.2 From 75e613cdc7bb2ba3795b1bc3ddf19476c767ba68 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 3 Jun 2009 00:13:13 -0700 Subject: x86/pci: fix mmconfig detection with 32bit near 4g Pascal reported and bisected a commit: | x86/PCI: don't call e820_all_mapped with -1 in the mmconfig case which broke one system system. ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255 PCI: MCFG area at f0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG for extended config space it didn't have PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 anymore, and try to use 0xf000000 - 0xffffffff for mmconfig For 32bit, mcfg_res->end could be 32bit only (if 64 resources aren't used) So use end - 1 to pass the value in mcfg->end to avoid overflow. We don't need to worry about the e820 path, they are always 64 bit. Reported-by: Pascal Terjan Bisected-by: Pascal Terjan Tested-by: Pascal Terjan Signed-off-by: Yinghai Lu Cc: stable@kernel.org Signed-off-by: Jesse Barnes --- arch/x86/pci/mmconfig-shared.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c index 5fa10bb9604f..8766b0e216c5 100644 --- a/arch/x86/pci/mmconfig-shared.c +++ b/arch/x86/pci/mmconfig-shared.c @@ -375,7 +375,7 @@ static acpi_status __init check_mcfg_resource(struct acpi_resource *res, if (!fixmem32) return AE_OK; if ((mcfg_res->start >= fixmem32->address) && - (mcfg_res->end <= (fixmem32->address + + (mcfg_res->end < (fixmem32->address + fixmem32->address_length))) { mcfg_res->flags = 1; return AE_CTRL_TERMINATE; @@ -392,7 +392,7 @@ static acpi_status __init check_mcfg_resource(struct acpi_resource *res, return AE_OK; if ((mcfg_res->start >= address.minimum) && - (mcfg_res->end <= (address.minimum + address.address_length))) { + (mcfg_res->end < (address.minimum + address.address_length))) { mcfg_res->flags = 1; return AE_CTRL_TERMINATE; } @@ -418,7 +418,7 @@ static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used) struct resource mcfg_res; mcfg_res.start = start; - mcfg_res.end = end; + mcfg_res.end = end - 1; mcfg_res.flags = 0; acpi_get_devices("PNP0C01", find_mboard_resource, &mcfg_res, NULL); -- cgit v1.2.2 From 2cb7878a3a4341d1faa208de962d66f0817d3e7a Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Wed, 3 Jun 2009 14:52:24 +0930 Subject: lguest: fix 'unhandled trap 13' with CONFIG_CC_STACKPROTECTOR We don't set up the canary; let's disable stack protector on boot.c so we can get into lguest_init, then set it up. As a side effect, switch_to_new_gdt() sets up %fs for us properly too. Signed-off-by: Rusty Russell Acked-by: Tejun Heo Signed-off-by: Linus Torvalds --- arch/x86/lguest/Makefile | 1 + arch/x86/lguest/boot.c | 17 +++++++++++++---- 2 files changed, 14 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/lguest/Makefile b/arch/x86/lguest/Makefile index 27f0c9ed7f60..94e0e54056a9 100644 --- a/arch/x86/lguest/Makefile +++ b/arch/x86/lguest/Makefile @@ -1 +1,2 @@ obj-y := i386_head.o boot.o +CFLAGS_boot.o := $(call cc-option, -fno-stack-protector) diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index ca7ec44bafc3..33a93b417396 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -67,6 +67,7 @@ #include #include #include +#include #include /* for struct machine_ops */ /*G:010 Welcome to the Guest! @@ -1088,13 +1089,21 @@ __init void lguest_init(void) * lguest_init() where the rest of the fairly chaotic boot setup * occurs. */ + /* The stack protector is a weird thing where gcc places a canary + * value on the stack and then checks it on return. This file is + * compiled with -fno-stack-protector it, so we got this far without + * problems. The value of the canary is kept at offset 20 from the + * %gs register, so we need to set that up before calling C functions + * in other files. */ + setup_stack_canary_segment(0); + /* We could just call load_stack_canary_segment(), but we might as + * call switch_to_new_gdt() which loads the whole table and sets up + * the per-cpu segment descriptor register %fs as well. */ + switch_to_new_gdt(0); + /* As described in head_32.S, we map the first 128M of memory. */ max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT; - /* Load the %fs segment register (the per-cpu segment register) with - * the normal data segment to get through booting. */ - asm volatile ("mov %0, %%fs" : : "r" (__KERNEL_DS) : "memory"); - /* The Host<->Guest Switcher lives at the top of our address space, and * the Host told us how big it is when we made LGUEST_INIT hypercall: * it put the answer in lguest_data.reserve_mem */ -- cgit v1.2.2 From 2c701b10283b58937201004276319ef9d9051b5d Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Fri, 5 Jun 2009 12:37:07 -0400 Subject: [CPUFREQ] powernow-k8: check space_id of _PCT registers to be FFH The powernow-k8 driver checks to see that the Performance Control/Status Registers are declared as FFH (functional fixed hardware) by the BIOS. However, this check got broken in the commit: 0e64a0c982c06a6b8f5e2a7f29eb108fdf257b2f [CPUFREQ] checkpatch cleanups for powernow-k8 Fix based on an original patch from Naga Chumbalkar. Signed-off-by: Naga Chumbalkar Cc: Mark Langsdorf Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index f6b32d112357..35dc8fbe92bd 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -835,7 +835,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) { struct cpufreq_frequency_table *powernow_table; int ret_val = -ENODEV; - acpi_integer space_id; + acpi_integer control, status; if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) { dprintk("register performance failed: bad ACPI data\n"); @@ -848,12 +848,13 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) goto err_out; } - space_id = data->acpi_data.control_register.space_id; - if ((space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) || - (space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) { + control = data->acpi_data.control_register.space_id; + status = data->acpi_data.status_register.space_id; + + if ((control != ACPI_ADR_SPACE_FIXED_HARDWARE) || + (status != ACPI_ADR_SPACE_FIXED_HARDWARE)) { dprintk("Invalid control/status registers (%x - %x)\n", - data->acpi_data.control_register.space_id, - space_id); + control, status); goto err_out; } -- cgit v1.2.2 From e082f188f774544bc2c2edf51176157503c98fe4 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 2 Jun 2009 19:05:28 +0100 Subject: MIPS: Sibyte: Honor CONFIG_CMDLINE Original patch by Imre Kaloz . Signed-off-by: Ralf Baechle --- arch/mips/sibyte/cfe/setup.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/mips/sibyte/cfe/setup.c b/arch/mips/sibyte/cfe/setup.c index 3de30f79db3f..eb5396cf81bb 100644 --- a/arch/mips/sibyte/cfe/setup.c +++ b/arch/mips/sibyte/cfe/setup.c @@ -288,13 +288,7 @@ void __init prom_init(void) */ cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE); if (cfe_getenv("LINUX_CMDLINE", arcs_cmdline, CL_SIZE) < 0) { - if (argc < 0) { - /* - * It's OK for direct boot to not provide a - * command line - */ - strcpy(arcs_cmdline, "root=/dev/ram0 "); - } else { + if (argc >= 0) { /* The loader should have set the command line */ /* too early for panic to do any good */ printk("LINUX_CMDLINE not defined in cfe."); -- cgit v1.2.2 From c9d89d97f0d174b9154820dd5c6726d1c794cd99 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Tue, 2 Jun 2009 23:15:10 +0900 Subject: MIPS: Kconfig: Remove "Support for" from Cavium system type Signed-off-by: Yoichi Yuasa Acked-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 09b1287a92ce..28119e641f19 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -593,7 +593,7 @@ config WR_PPMC board, which is based on GT64120 bridge chip. config CAVIUM_OCTEON_SIMULATOR - bool "Support for the Cavium Networks Octeon Simulator" + bool "Cavium Networks Octeon Simulator" select CEVT_R4K select 64BIT_PHYS_ADDR select DMA_COHERENT @@ -607,7 +607,7 @@ config CAVIUM_OCTEON_SIMULATOR hardware. config CAVIUM_OCTEON_REFERENCE_BOARD - bool "Support for the Cavium Networks Octeon reference board" + bool "Cavium Networks Octeon reference board" select CEVT_R4K select 64BIT_PHYS_ADDR select DMA_COHERENT -- cgit v1.2.2 From e25bfc9243f2eab12a2ce92b7f4b8a2e3e6949a6 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Tue, 2 Jun 2009 23:17:07 +0900 Subject: MIPS: Cobalt: PCI bus is always required to obtain the board ID Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 28119e641f19..25f3b0a11ca8 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -72,6 +72,7 @@ config MIPS_COBALT select IRQ_CPU select IRQ_GT641XX select PCI_GT64XXX_PCI0 + select PCI select SYS_HAS_CPU_NEVADA select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL -- cgit v1.2.2 From 3a553147eaad5d4de90ab1f695aa13ddbea684ec Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Thu, 4 Jun 2009 18:05:49 +0530 Subject: MIPS: ioctl.h: Fix headers_check warnings Make ioctl.h compatible with asm-generic/ioctl.h and userspace fix the following 'make headers_check' warning: usr/include/asm-mips/ioctl.h:64: extern's make no sense in userspace Signed-off-by: Jaswinder Singh Rajput Signed-off-by: Ralf Baechle --- arch/mips/include/asm/ioctl.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/mips/include/asm/ioctl.h b/arch/mips/include/asm/ioctl.h index 85067e248a83..916163401b2c 100644 --- a/arch/mips/include/asm/ioctl.h +++ b/arch/mips/include/asm/ioctl.h @@ -60,12 +60,16 @@ ((nr) << _IOC_NRSHIFT) | \ ((size) << _IOC_SIZESHIFT)) +#ifdef __KERNEL__ /* provoke compile error for invalid uses of size argument */ extern unsigned int __invalid_size_argument_for_IOC; #define _IOC_TYPECHECK(t) \ ((sizeof(t) == sizeof(t[1]) && \ sizeof(t) < (1 << _IOC_SIZEBITS)) ? \ sizeof(t) : __invalid_size_argument_for_IOC) +#else +#define _IOC_TYPECHECK(t) (sizeof(t)) +#endif /* used to create numbers */ #define _IO(type, nr) _IOC(_IOC_NONE, (type), (nr), 0) -- cgit v1.2.2 From 5636919b5c909fee54a6ef5226475ecae012ad02 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 28 Feb 2009 09:44:28 +0000 Subject: MIPS: Outline udelay and fix a few issues. Outlining fixes the issue were on certain CPUs such as the R10000 family the delay loop would need an extra cycle if it overlaps a cacheline boundary. The rewrite also fixes build errors with GCC 4.4 which was changed in way incompatible with the kernel's inline assembly. Relying on pure C for computation of the delay value removes the need for explicit. The price we pay is a slight slowdown of the computation - to be fixed on another day. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/cpu-info.h | 4 +- arch/mips/include/asm/delay.h | 92 +++------------------------------------- arch/mips/kernel/proc.c | 2 +- arch/mips/lib/Makefile | 4 +- arch/mips/lib/delay.c | 56 ++++++++++++++++++++++++ 5 files changed, 66 insertions(+), 92 deletions(-) create mode 100644 arch/mips/lib/delay.c (limited to 'arch') diff --git a/arch/mips/include/asm/cpu-info.h b/arch/mips/include/asm/cpu-info.h index 744cd8fb107f..126044308dec 100644 --- a/arch/mips/include/asm/cpu-info.h +++ b/arch/mips/include/asm/cpu-info.h @@ -39,8 +39,8 @@ struct cache_desc { #define MIPS_CACHE_PINDEX 0x00000020 /* Physically indexed cache */ struct cpuinfo_mips { - unsigned long udelay_val; - unsigned long asid_cache; + unsigned int udelay_val; + unsigned int asid_cache; /* * Capability and feature descriptor structure for MIPS CPU diff --git a/arch/mips/include/asm/delay.h b/arch/mips/include/asm/delay.h index b0bccd2c4ed5..a07e51b2be13 100644 --- a/arch/mips/include/asm/delay.h +++ b/arch/mips/include/asm/delay.h @@ -11,94 +11,12 @@ #ifndef _ASM_DELAY_H #define _ASM_DELAY_H -#include -#include +extern void __delay(unsigned int loops); +extern void __ndelay(unsigned int ns); +extern void __udelay(unsigned int us); -#include -#include - -static inline void __delay(unsigned long loops) -{ - if (sizeof(long) == 4) - __asm__ __volatile__ ( - " .set noreorder \n" - " .align 3 \n" - "1: bnez %0, 1b \n" - " subu %0, 1 \n" - " .set reorder \n" - : "=r" (loops) - : "0" (loops)); - else if (sizeof(long) == 8 && !DADDI_WAR) - __asm__ __volatile__ ( - " .set noreorder \n" - " .align 3 \n" - "1: bnez %0, 1b \n" - " dsubu %0, 1 \n" - " .set reorder \n" - : "=r" (loops) - : "0" (loops)); - else if (sizeof(long) == 8 && DADDI_WAR) - __asm__ __volatile__ ( - " .set noreorder \n" - " .align 3 \n" - "1: bnez %0, 1b \n" - " dsubu %0, %2 \n" - " .set reorder \n" - : "=r" (loops) - : "0" (loops), "r" (1)); -} - - -/* - * Division by multiplication: you don't have to worry about - * loss of precision. - * - * Use only for very small delays ( < 1 msec). Should probably use a - * lookup table, really, as the multiplications take much too long with - * short delays. This is a "reasonable" implementation, though (and the - * first constant multiplications gets optimized away if the delay is - * a constant) - */ - -static inline void __udelay(unsigned long usecs, unsigned long lpj) -{ - unsigned long hi, lo; - - /* - * The rates of 128 is rounded wrongly by the catchall case - * for 64-bit. Excessive precission? Probably ... - */ -#if defined(CONFIG_64BIT) && (HZ == 128) - usecs *= 0x0008637bd05af6c7UL; /* 2**64 / (1000000 / HZ) */ -#elif defined(CONFIG_64BIT) - usecs *= (0x8000000000000000UL / (500000 / HZ)); -#else /* 32-bit junk follows here */ - usecs *= (unsigned long) (((0x8000000000000000ULL / (500000 / HZ)) + - 0x80000000ULL) >> 32); -#endif - - if (sizeof(long) == 4) - __asm__("multu\t%2, %3" - : "=h" (usecs), "=l" (lo) - : "r" (usecs), "r" (lpj) - : GCC_REG_ACCUM); - else if (sizeof(long) == 8 && !R4000_WAR) - __asm__("dmultu\t%2, %3" - : "=h" (usecs), "=l" (lo) - : "r" (usecs), "r" (lpj) - : GCC_REG_ACCUM); - else if (sizeof(long) == 8 && R4000_WAR) - __asm__("dmultu\t%3, %4\n\tmfhi\t%0" - : "=r" (usecs), "=h" (hi), "=l" (lo) - : "r" (usecs), "r" (lpj) - : GCC_REG_ACCUM); - - __delay(usecs); -} - -#define __udelay_val cpu_data[raw_smp_processor_id()].udelay_val - -#define udelay(usecs) __udelay((usecs), __udelay_val) +#define ndelay(ns) __udelay(ns) +#define udelay(us) __udelay(us) /* make sure "usecs *= ..." in udelay do not overflow. */ #if HZ >= 1000 diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c index 26760cad8b69..e0a4ac18fa07 100644 --- a/arch/mips/kernel/proc.c +++ b/arch/mips/kernel/proc.c @@ -42,7 +42,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, fmt, __cpu_name[n], (version >> 4) & 0x0f, version & 0x0f, (fp_vers >> 4) & 0x0f, fp_vers & 0x0f); - seq_printf(m, "BogoMIPS\t\t: %lu.%02lu\n", + seq_printf(m, "BogoMIPS\t\t: %u.%02u\n", cpu_data[n].udelay_val / (500000/HZ), (cpu_data[n].udelay_val / (5000/HZ)) % 100); seq_printf(m, "wait instruction\t: %s\n", cpu_wait ? "yes" : "no"); diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index c13c7ad2cdae..2adead5a8a37 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -2,8 +2,8 @@ # Makefile for MIPS-specific library files.. # -lib-y += csum_partial.o memcpy.o memcpy-inatomic.o memset.o strlen_user.o \ - strncpy_user.o strnlen_user.o uncached.o +lib-y += csum_partial.o delay.o memcpy.o memcpy-inatomic.o memset.o \ + strlen_user.o strncpy_user.o strnlen_user.o uncached.o obj-y += iomap.o obj-$(CONFIG_PCI) += iomap-pci.o diff --git a/arch/mips/lib/delay.c b/arch/mips/lib/delay.c new file mode 100644 index 000000000000..f69c6b569eb3 --- /dev/null +++ b/arch/mips/lib/delay.c @@ -0,0 +1,56 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 by Waldorf Electronics + * Copyright (C) 1995 - 2000, 01, 03 by Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2007 Maciej W. Rozycki + */ +#include +#include +#include + +#include +#include + +inline void __delay(unsigned int loops) +{ + __asm__ __volatile__ ( + " .set noreorder \n" + " .align 3 \n" + "1: bnez %0, 1b \n" + " subu %0, 1 \n" + " .set reorder \n" + : "=r" (loops) + : "0" (loops)); +} +EXPORT_SYMBOL(__delay); + +/* + * Division by multiplication: you don't have to worry about + * loss of precision. + * + * Use only for very small delays ( < 1 msec). Should probably use a + * lookup table, really, as the multiplications take much too long with + * short delays. This is a "reasonable" implementation, though (and the + * first constant multiplications gets optimized away if the delay is + * a constant) + */ + +void __udelay(unsigned long us) +{ + unsigned int lpj = current_cpu_data.udelay_val; + + __delay((us * 0x000010c7 * HZ * lpj) >> 32); +} +EXPORT_SYMBOL(__udelay); + +void __ndelay(unsigned long ns) +{ + unsigned int lpj = current_cpu_data.udelay_val; + + __delay((us * 0x00000005 * HZ * lpj) >> 32); +} +EXPORT_SYMBOL(__ndelay); -- cgit v1.2.2 From eaa958402ea40851097d051f52ba1bb7a885efe9 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 6 Jun 2009 14:51:36 -0700 Subject: cpumask: alloc zeroed cpumask for static cpumask_var_ts These are defined as static cpumask_var_t so if MAXSMP is not used, they are cleared already. Avoid surprises when MAXSMP is enabled. Signed-off-by: Yinghai Lu Signed-off-by: Rusty Russell --- arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 2 +- arch/x86/kernel/cpu/cpufreq/powernow-k7.c | 2 +- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 2 +- arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c | 2 +- arch/x86/kernel/cpu/mcheck/mce_64.c | 2 +- arch/x86/kernel/tlb_uv.c | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 54b6de2cd947..752e8c6b2c7e 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -550,7 +550,7 @@ static int __init acpi_cpufreq_early_init(void) return -ENOMEM; } for_each_possible_cpu(i) { - if (!alloc_cpumask_var_node( + if (!zalloc_cpumask_var_node( &per_cpu_ptr(acpi_perf_data, i)->shared_cpu_map, GFP_KERNEL, cpu_to_node(i))) { diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c index a8363e5be4ef..d47c775eb0ab 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c @@ -322,7 +322,7 @@ static int powernow_acpi_init(void) goto err0; } - if (!alloc_cpumask_var(&acpi_processor_perf->shared_cpu_map, + if (!zalloc_cpumask_var(&acpi_processor_perf->shared_cpu_map, GFP_KERNEL)) { retval = -ENOMEM; goto err05; diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index 35dc8fbe92bd..cf52215d9eb1 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -887,7 +887,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) /* notify BIOS that we exist */ acpi_processor_notify_smm(THIS_MODULE); - if (!alloc_cpumask_var(&data->acpi_data.shared_cpu_map, GFP_KERNEL)) { + if (!zalloc_cpumask_var(&data->acpi_data.shared_cpu_map, GFP_KERNEL)) { printk(KERN_ERR PFX "unable to alloc powernow_k8_data cpumask\n"); ret_val = -ENOMEM; diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c index c9f1fdc02830..55c831ed71ce 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c @@ -471,7 +471,7 @@ static int centrino_target (struct cpufreq_policy *policy, if (unlikely(!alloc_cpumask_var(&saved_mask, GFP_KERNEL))) return -ENOMEM; - if (unlikely(!alloc_cpumask_var(&covered_cpus, GFP_KERNEL))) { + if (unlikely(!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL))) { free_cpumask_var(saved_mask); return -ENOMEM; } diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c index 6fb0b359d2a5..09dd1d414fc3 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_64.c @@ -1163,7 +1163,7 @@ static __init int mce_init_device(void) if (!mce_available(&boot_cpu_data)) return -EIO; - alloc_cpumask_var(&mce_device_initialized, GFP_KERNEL); + zalloc_cpumask_var(&mce_device_initialized, GFP_KERNEL); err = mce_init_banks(); if (err) diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c index ed0c33761e6d..8c7b03b0cfcb 100644 --- a/arch/x86/kernel/tlb_uv.c +++ b/arch/x86/kernel/tlb_uv.c @@ -832,7 +832,7 @@ static int __init uv_bau_init(void) return 0; for_each_possible_cpu(cur_cpu) - alloc_cpumask_var_node(&per_cpu(uv_flush_tlb_mask, cur_cpu), + zalloc_cpumask_var_node(&per_cpu(uv_flush_tlb_mask, cur_cpu), GFP_KERNEL, cpu_to_node(cur_cpu)); uv_bau_retry_limit = 1; -- cgit v1.2.2