aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
Commit message (Collapse)AuthorAge
...
| | | * | | | | | | | | iwlwifi: mvm: the SCD byte count is a TLV flagEmmanuel Grumbach2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SCD byte count layout is decided by the configuration done in fw, it is then logical to export it as a TLV flag and not per HW SKU. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: fix indirect write bugAmnon Paz2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a bug in writing to indirect (periphery) registers; although writes seem successful the data is not written to the desired address). Also fix address mask for HBUS_TARG_PRPH_RADDR and HBUS_TARG_PRPH_WADDR registers. Signed-off-by: Amnon Paz <amnonX.paz@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: move firmware restart debugfs hook to op_modeEmmanuel Grumbach2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows to test fw restart flow. The hook in transport layer doesn't really make the fw assert. Moving this hook to the op_mode allows to use the fw API to actually send a host command that will make the fw assert. Change the restart_fw module parameter to be a boolean on the way. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: mvm: update firmware API - MAC ID in RXEmmanuel Grumbach2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The firmware tells the driver to what MACs the received frame belongs (based on the time slot in which it was received). Note that there can be several MACs if they share the same binding. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: mvm: export last bt_notif through debugfsEmmanuel Grumbach2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This will allow to track how BT core updates the driver. This is required to debug the BT Coexistence mechanism. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: mvm: update SMPS when BT gets activeEmmanuel Grumbach2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When BT traffic load gets higher, we want to avoid using the shared antenna. In order to do so, we need to tell the AP that we don't support MIMO any more, or at least not all the time: in short, use the SMPS to achieve this. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: mvm: handle BT-coex notificationEmmanuel Grumbach2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BT-Coex notification is sent by the fw when there are updates wrt. BT activity. Driver action might be taken based on the info in this notification. For now, update the Ack/Cts_kill_msk if HID / SCO / A2DP profiles are active. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: mvm: begin basic BT-Coex implementationEmmanuel Grumbach2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Send the PRIO table before the calibrations. This table tells the fw what priority to give to what (WiFi / BT) according to events. Send a hardcoded BT_COEX command to the fw to enable basic BT coexistence. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: mvm: add BT Coex FW APIEmmanuel Grumbach2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the API to tell the fw to handle the BT Coexistence. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: mvm: add CARD_STATE_NOTIFICATION to the cmd stringsEmmanuel Grumbach2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Then the transport can print it nicely in its debug prints. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: export symbols only conditionallyJohannes Berg2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If all the pieces of iwlwifi are built into the kernel then there's no need for it to export its symbols to other modules, so prevent that. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: allow selecting only MVM driverJohannes Berg2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we have two drivers (DVM and MVM) stop selecting the DVM one (but make it default) and allow enabling only the MVM driver if so desired. Add a warning for the case of having neither DVM nor MVM enabled -- that's useless. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: mvm: Change NVM default section read sizeDor Shaish2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Dor Shaish <dor.shaish@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: mvm: don't read system time when modifying AP/GO MACJohannes Berg2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When modifying a MAC, we update its beacon system time which is taken as a base to calculate TBTT. The firmware doesn't use the new timestamp because the time is never used after the MAC and broadcast station were added, but it is safer to not rely on this and avoids the overhead of reading the register every time the MAC is updated. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: make device configuration bus agnosticEmmanuel Grumbach2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Newer devices can work on different buses. This means that their configuration can be shared between different buses. Hence the configuration structures should exported to all the buses and not only to PCIE. Change this. Note that this requires all the fields to be the same amongst the buses. If differences will appear, we can always define a part that is bus dependent. Today, this is not needed. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: dvm: pad iwl_compressed_ba_respEmmanuel Grumbach2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All the data coming from the fw must have a length that is multiple of 4. This doesn't change anything to the way we handle the notification. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: mvm: advertise VHT capabilitiesEytan Lifshitz2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the NVM parsing functions to add VHT capabilities; they are only added for 5 GHz, of course. This assumes that all devices with NVM reading (rather than EEPROM) that support 5 GHz have VHT, which is true right now. Signed-off-by: Eytan Lifshitz <eytan.lifshitz@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: mvm: set up initial SMPS/NSS station infoJohannes Berg2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a station is added, we need to tell the firmware what the SMPS settings and number of streams are. After having the initial data, the firmware will track future changes by itself. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: mvm: implement remote wakeJohannes Berg2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With remote wake, the firmware creates a TCP connection and sends some configurable data on it, until a special TCP data packet from the server is received that triggers a wakeup. The configuration is a bit tricky because it is based on packet pattern matching but this is hidden in the driver and the exposed API in cfg80211 is just based on the required TCP connection parameters. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: convert to use simple_open()Wei Yongjun2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This removes an open coded simple_open() function and replaces file operations references to the function with simple_open() instead. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: use __get_str in tracingJohannes Berg2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of using (char *)__get_dynamic_array use __get_str. The latter is actually a macro that expands to the former in the code, but trace-cmd in userspace can parse __get_str only. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: support DSSS/CCK mode in 40 MHzJohannes Berg2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All hardware after 4965 supports this. It's likely that it wasn't set because for 4965 it was irrelevant (HT is only supported on 5 GHz there) and then never updated. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: mvm: support IEEE80211_AMPDU_TX_STOP_FLUSHEmmanuel Grumbach2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mac80211 tells us when we need to dump the frames from the AGG queue instead of releasing them as single MPDUs. Being able to differentiate between the different cases (IEEE80211_AMPDU_TX_STOP_*) allows us to handle races better. When the station is removed, mac80211 asks to flush and removes the station right away. This allows to avoid a case where we still have frames in AGG queues, but the station has been remove already. Note that we can have frames on the shared queues, but this is not a problem: the station in the fw will be kept until all the frames on the shared queues have been drained. AGG queues are a special case since they are dynamically allocated. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: mvm: Add support for additional addressesIlan Peer2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the number of addresses (max 5) from the NVM instead of limiting to 2 artificially. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: disable greenfield transmissions as a workaroundBeni Lev2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's a bug that causes the rate scaling to get stuck when it has to use single-stream rates with a peer that can do GF and SGI; the two are incompatible so we can't use them together, but that causes the algorithm to not work at all, it always rejects updates. Disable greenfield for now to prevent that problem. The MVM driver currently only works on devices that don't support greenfield anyway, but better be safe and not allow us to forget about this. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: 7000: disable HT greenfield supportBeni Lev2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 7000 series devices don't support HT greenfield mode so don't advertise or use it. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: mvm: Update MAC context filter flagsIlan Peer2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. For P2P Device filter in only probe requests. 2. For station mode filter in all group cast frames, and in addition beacons as long as we are not associated. 3. For AP/GO filter in all group cast and in addition probe requests. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: mvm: don't use cts to selfDor Shaish2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current fw doesn't currently support cts to self. There is a bug in the fw that prevents us from using cts to self. Use full protection (including RTS) for now. Signed-off-by: Dor Shaish <dor.shaish@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: mvm: free AGG queue when we STA is removedEmmanuel Grumbach2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we stop an AGG session, we need to look at the sequence numbers in in the private area of the ieee80211_sta struct. This allows us to know is the queue is empty. To get access to this private area, we use fw_id_to_mac_id that maps sta_id (index of the STA in fw table) to ieee80211_sta. When the STA exists in fw, but not in mac80211, we set an ERR ptr in fw_id_to_mac_id. But if we first set an ERR ptr to fw_id_to_mac_id, and only then flush the queues, then we won't be able to access the sequence numbers in ieee80211_sta from the reclaim flow. This means that we will never be able to release an AGG queue when a station is deleted. So first, flush the queue. That will let the reclaim flow call iwl_mvm_check_ratid_empty which will disable the AGG queue as needed, and only then, remove the mapping in fw_id_to_mac_id. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: mvm: respect disable Tx AGG parameterEmmanuel Grumbach2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We didn't check that we allowed to start Tx AGG. This can possibly be avoided by a module parameter. Fix that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | iwlwifi: a few fixes in licenseEmmanuel Grumbach2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 7000.c was released as GPL only by mistake: it should be dual licensed - GPL / BSD. The file that contains the license in the kernel is COPYING and not LICENSE.GPL. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | Merge remote-tracking branch 'iwlwifi-fixes/master' into HEADJohannes Berg2013-03-06
| | | |\ \ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is needed to resolve some conflicts that would otherwise happen between wireless-next and the code here. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * | \ \ \ \ \ \ \ \ \ Merge branch 'for-john' of ↵John W. Linville2013-03-08
| | |\ \ \ \ \ \ \ \ \ \ \ | | | | |_|_|_|_|_|_|/ / / | | | |/| | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
| | | * | | | | | | | | | mac80211: Allow drivers to differentiate between ROC typesIlan Peer2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some devices can handle remain on channel requests differently based on the request type/priority. Add support to differentiate between different ROC types, i.e., indicate that the ROC is required for sending managment frames. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | | wireless: move sequence number arithmetic to ieee80211.hJohannes Berg2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the sequence number arithmetic code from mac80211 to ieee80211.h so others can use it. Also rename the functions from _seq to _sn, they operate on the sequence number, not the sequence_control field. Also move macros to convert the sequence control to/from the sequence number value from various drivers. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | | * | | | | | | | | | cfg80211: comprehensively check station changesJohannes Berg2013-03-06
| | | |/ / / / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The station change API isn't being checked properly before drivers are called, and as a result it is difficult to see what should be allowed and what not. In order to comprehensively check the API parameters parse everything first, and then have the driver call a function (cfg80211_check_station_change()) with the additionally information about the kind of station that is being changed; this allows the function to make better decisions than the old code could. While at it, also add a few checks, particularly in mesh and clarify the TDLS station lifetime in documentation. To be able to reduce a few checks, ignore any flag set bits when the mask isn't set, they shouldn't be applied then. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * | | | | | | | | | mwifiex: add WOWLAN supportAmitkumar Karwar2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently 'magic-packet' and 'patterns' options in 'iw wowlan' command are supported. Appropriate packet filters for wowlan are configured in firmware based on provided patterns and/or magic-packet option. For examples, wake-on ARP request for 192.168.0.100: iw phy0 wowlan enable patterns ff:ff:ff:ff:ff:ff 20+08:06 46+c0:a8:00:64 wake-on RX packets sent from IP address 192.168.0.88: iw phy0 wowlan enable patterns 34+c0:a8:00:58 wake-on RX packets with TCP destination port 80 iw phy0 wowlan enable patterns 44+50 wake-on MagicPacket: iw phy0 wowlan enable magic-packet wake-on MagicPacket or patterns: iw phy0 wowlan enable magic-packet patterns 12+00:11:22:33:44:55 18+00:50:43:21 wake-on IPv4 multicast packets: iw phy0 wowlan enable patterns 01:00:5e wake-on IPv6 multicast packets: iw phy0 wowlan enable patterns 33:33 disable all wowlan options iw phy0 wowlan disable Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | | | | | | | | | mwifiex: add "ethtool wol" command supportAmitkumar Karwar2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Host sleep wakeup condition is configured using this command. Supports Wake-on: pumb For examples: wake-on any unicast packets: ethtool -s mlan0 wol u wake-on multicast/broadcast packet: ethtool -s mlan0 wol mb wake-on unicast packets and MAC events: ethtool -s mlan0 wol pu wake-on unicast/multicast/broadcast packets and MAC events: ethtool -s mlan0 wol pmbu disable all wake-on options: ethtool -s mlan0 wol d Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | | | | | | | | | mwifiex: shorten the host sleep configuration macro namesAmitkumar Karwar2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As we are adding a few more macros in this category in next patch, this cleanup work is required. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | | | | | | | | | mwifiex: modify skb->truesize for PCIE RxAvinash Patil2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We allocate SKB buffers of 4K size to make sure that we process RX AMSDU of 4K. So when skb->len is lesser than 4K; we should modify skb->truesize. This resolves an issue where kernel has allocated packets with 2K assumption and starts dropping packets for large size data transfer. This fix is already present for USB; extend it to PCIE. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | | | | | | | | | mwifiex: avoid [-Wmaybe-uninitialized] warnings in pcie.cBing Zhao2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/net/wireless/mwifiex/pcie.c:1157:9: warning: 'desc2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/net/wireless/mwifiex/pcie.c:1048:31: note: 'desc2' was declared here drivers/net/wireless/mwifiex/pcie.c:1159:9: warning: 'desc' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/net/wireless/mwifiex/pcie.c:1047:32: note: 'desc' was declared here Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | | | | | | | | | mwifiex: fix [-Wunused-function] warnings on pcie suspend/resumeBing Zhao2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/net/wireless/mwifiex/pcie.c:204:12: warning: 'mwifiex_pcie_resume' defined but not used [-Wunused-function] drivers/net/wireless/mwifiex/pcie.c:166:12: warning: 'mwifiex_pcie_suspend' defined but not used [-Wunused-function] The suspend/resume handlers ought to be under CONFIG_PM directive. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | | | | | | | | | mwifiex: remove static forward declarations in pcie.cBing Zhao2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | move functions up just to avoid static forward declaration for mwifiex_pcie_resume. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | | | | | | | | | ath9k: Report rx-crc-errors in ethtool stats.Ben Greear2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | | | | | | | | | ath9k: Report txerr-filtered errors in debugfs.Ben Greear2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | | | | | | | | | b43: HT-PHY: make it BCMA-onlyRafał Miłecki2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | HT-PHY was found only on BCM4331 which is a BCMA-based chipset. This is reallly unlikely we will ever see HT-PHY on SSB thus make the whole code BCMA specific. This will allow us to call various BCMA-specific functions directly (without extra checks). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | | | | | | | | | ath9k_hw: Fix fixed antenna for AR9462Sujith Manoharan2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the RX chainmask is set to 0x2 for AR9462, certain values from chain1 have to be programmed for chain0 also. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | | | | | | | | | ath9k_hw: Update initvals for AR9462Sujith Manoharan2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | | | | | | | | | ath9k_hw: Use helper functions to simplify HW resetSujith Manoharan2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | | | | | | | | | ath9k_hw: Remove CHANNEL_CW_INTSujith Manoharan2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This flag is used for indicating channel interference and we currently do nothing with it, so remove it. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.2 (git 2.25.0) at 2025-04-18 09:52:13 -0400