aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet
Commit message (Collapse)AuthorAge
...
| | * | | | | | | ixgbe: Enable support for recognizing PCI-e Gen3 link speedJacob Keller2013-04-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for displaying PCIe Gen3 link speed, which was previously missing from the driver. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| | * | | | | | | ixgbe: Drop check for PAGE_SIZE from ixgbe_xmit_frame_ringAlexander Duyck2013-04-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The check for PAGE_SIZE is pointless now that the default configuration is to allocate 32K for all buffers. Since the Tx descriptor limit is 16K we can just drop the check and always compare the descriptors to the maximum size supported. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| | * | | | | | | ixgbe: don't do arithmetic operations on bitmasksEmil Tantilov2013-04-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make the calculation of eerd consistent between the read and write functions by using | instead of + for IXGBE_EEPROM_RW_REG_START Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| | * | | | | | | ixgbe: Mask off check of frag_off as we only want fragment offsetAlexander Duyck2013-04-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We were incorrectly checking the entire frag_off field when we only wanted the fragment offset. As a result we were not pulling in TCP headers when the DNF flag was set. To correct that we will now check for frag off using the IP_OFFSET mask. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | | | | | | | fec: Remove unneeded asm header filesFabio Estevam2013-04-18
| |/ / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is nothing in the driver that requires <asm/coldfire.h> and <asm/mcfsim.h>. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | atl1: Protect atl1_suspend with CONFIG_PM_SLEEPFabio Estevam2013-04-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 7b7a2bbb690 (atl1: Remove unneeded PM_OPS definitions) removed the definition of atl1_suspend for the !CONFIG_PM_SLEEP case. So only call atl1_suspend() when CONFIG_PM_SLEEP is defined and fix the following build error from randconfig: drivers/net/ethernet/atheros/atlx/atl1.c: In function 'atl1_shutdown': drivers/net/ethernet/atheros/atlx/atl1.c:2888:2: error: implicit declaration of function 'atl1_suspend' [-Werror=implicit-function-declaration] Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | fec: Use SIMPLE_DEV_PM_OPSFabio Estevam2013-04-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using SIMPLE_DEV_PM_OPS can make the code smaller and simpler. Also change CONFIG_PM to CONFIG_PM_SLEEP. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | pch_gbe: minor: report the actual error on MTU changeVeaceslav Falico2013-04-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we can't _up() after changing the MTU, report the actual error instead of -ENOMEM. It can be really misleading cause pch_gbe is usually used in scenarios where the memory amount is really small, and thus hiding the real cause. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | tlan: cancel work at remove pathDevendra Naga2013-04-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | the work has been scheduled from interrupt, and not been cancelled when the driver is unloaded, which doesn't remove the work item from the global workqueue. call the cancel_work_sync when the driver is removed (rmmod'ed). Cc: Sriram <srk@ti.com> Cc: Cyril Chemparathy <cyril@ti.com> Cc: Vinay Hegde <vinay.hegde@ti.com> Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | ks8851: Remove unneeded PM_OPS definitionsFabio Estevam2013-04-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SIMPLE_DEV_PM_OPS macro can handle !CONFIG_PM_SLEEP case nicely, so there is no need to define PM_OPS for both CONFIG_PM_SLEEP and !CONFIG_PM_SLEEP cases. Remove the unneeded definitions. Cc: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | xgmac: Remove unneeded PM_OPS definitionsFabio Estevam2013-04-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SIMPLE_DEV_PM_OPS macro can handle !CONFIG_PM_SLEEP case nicely, so there is no need to define PM_OPS for both CONFIG_PM_SLEEP and !CONFIG_PM_SLEEP cases. Remove the unneeded definitions. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | tg3: Remove unneeded PM_OPS definitionsFabio Estevam2013-04-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SIMPLE_DEV_PM_OPS macro can handle !CONFIG_PM_SLEEP case nicely, so there is no need to define PM_OPS for both CONFIG_PM_SLEEP and !CONFIG_PM_SLEEP cases. Remove the unneeded definitions. Cc: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | atl1: Remove unneeded PM_OPS definitionsFabio Estevam2013-04-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SIMPLE_DEV_PM_OPS macro can handle !CONFIG_PM_SLEEP case nicely, so there is no need to define PM_OPS for both CONFIG_PM_SLEEP and !CONFIG_PM_SLEEP cases. Remove the unneeded definitions. Cc: Jay Cliburn <jcliburn@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | sis900: check for DMA map errorsDenis Kirjanov2013-04-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The first backtrace appears on tx path with DMA mapping operations debug enabled. [ 345.637919] ------------[ cut here ]------------ [ 345.637971] WARNING: at lib/dma-debug.c:937 check_unmap+0x4df/0x910() [ 345.637977] Hardware name: System Name [ 345.637987] sis900 0000:00:01.1: DMA-API: device driver failed to check map error[device address=0x000000000d4aed02] [si ze=60 bytes] [mapped as single] [ 345.637993] Modules linked in: bridge stp llc dmfe sundance 3c59x sis900 [ 345.638022] Pid: 0, comm: swapper Not tainted 3.9.0-rc6+ #4 [ 345.638028] Call Trace: [ 345.638042] [<c122097f>] ? check_unmap+0x4df/0x910 [ 345.638059] [<c102b19c>] warn_slowpath_common+0x7c/0xa0 [ 345.638070] [<c122097f>] ? check_unmap+0x4df/0x910 [ 345.638081] [<c102b23e>] warn_slowpath_fmt+0x2e/0x30 [ 345.638092] [<c122097f>] check_unmap+0x4df/0x910 [ 345.638107] [<c100bfeb>] ? save_stack_trace+0x2b/0x50 [ 345.638120] [<c107238e>] ? mark_lock+0x31e/0x5d0 [ 345.638132] [<c1072b2c>] ? __lock_acquire+0x4ec/0x7d0 [ 345.638143] [<c1220f6d>] debug_dma_unmap_page+0x6d/0x80 [ 345.638166] [<cf834dec>] sis900_interrupt+0x49c/0x860 [sis900] [ 345.638195] [<c1094b73>] handle_irq_event_percpu+0x43/0x1c0 [ 345.638206] [<c1094d1e>] ? handle_irq_event+0x2e/0x60 [ 345.638217] [<c1094d27>] handle_irq_event+0x37/0x60 [ 345.638235] [<c10973f0>] ? irq_set_chip_data+0x40/0x40 [ 345.638246] [<c1097442>] handle_level_irq+0x52/0xa0 [ 345.638251] <IRQ> [<c1003629>] ? do_IRQ+0x39/0xa0 [ 345.638293] [<c1484631>] ? common_interrupt+0x31/0x36 [ 345.638347] [<d08c2c52>] ? br_flood_forward+0x12/0x20 [bridge] [ 345.638364] [<d08c2d40>] ? br_dev_queue_push_xmit+0x60/0x60 [bridge] [ 345.638381] [<d08c3b2b>] ? br_handle_frame_finish+0x25b/0x280 [bridge] [ 345.638399] [<d08c3ce3>] ? br_handle_frame+0x193/0x290 [bridge] [ 345.638416] [<d08c3b50>] ? br_handle_frame_finish+0x280/0x280 [bridge] [ 345.638431] [<c13b3c87>] ? __netif_receive_skb_core+0x1d7/0x710 [ 345.638442] [<c13b3b19>] ? __netif_receive_skb_core+0x69/0x710 [ 345.638454] [<c13b41e1>] ? __netif_receive_skb+0x21/0x70 [ 345.638464] [<c13b42b5>] ? process_backlog+0x85/0x130 [ 345.638476] [<c13b4bbb>] ? net_rx_action+0xfb/0x1d0 [ 345.638497] [<c1032768>] ? __do_softirq+0xa8/0x1f0 [ 345.638527] [<c147daad>] ? _raw_spin_unlock+0x1d/0x20 [ 345.638538] [<c10038c0>] ? handle_irq+0x20/0xd0 [ 345.638550] [<c1032f27>] ? irq_exit+0x97/0xa0 [ 345.638560] [<c1003632>] ? do_IRQ+0x42/0xa0 [ 345.638580] [<c104d003>] ? hrtimer_start+0x23/0x30 [ 345.638580] [<c1484631>] ? common_interrupt+0x31/0x36 [ 345.638580] [<c1008703>] ? default_idle+0x33/0xc0 [ 345.638580] [<c10086ac>] ? cpu_idle+0x4c/0x70 [ 345.638580] [<c14787e0>] ? rest_init+0xa0/0xb0 [ 345.638580] [<c1478740>] ? reciprocal_value+0x50/0x50 [ 345.638580] [<c16b5bcf>] ? start_kernel+0x28f/0x320 [ 345.638580] [<c16b54e0>] ? repair_env_string+0x60/0x60 [ 345.638580] [<c16b5269>] ? i386_start_kernel+0x39/0xa0 [ 345.638580] ---[ end trace a244264b69b8a7ae ]--- [ 345.638580] Mapped at: [ 345.638580] [<c1221c65>] debug_dma_map_page+0x65/0x110 [ 345.638580] [<cf8355a9>] sis900_start_xmit+0x129/0x210 [sis900] [ 345.638580] [<c13b2527>] dev_hard_start_xmit+0x1b7/0x530 [ 345.638580] [<c13cc32e>] sch_direct_xmit+0x8e/0x280 [ 345.638580] [<c13b4e39>] dev_queue_xmit+0x1a9/0x5b0 Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | net/macb: fix error return code in macb_probe()Nicolas Ferre2013-04-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Original-idea-by: <yongjun_wei@trendmicro.com.cn> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | ucc_geth: Convert ugeth_<level> to pr_<level>Joe Perches2013-04-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove unnecessary macros that duplicate generic kernel functions. When a struct net_device is available: Convert printks to netdev_<level> Convert netif_msg_<foo> and ugeth_<level> to netif_<level> Add pr_fmt. Standardize on newlines at end of format. Remove some duplicated newlines from output. Coalesce formats. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | gianfar: Use netdev_<level> when possibleJoe Perches2013-04-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use a more current logging style. Convert pr_<level> to netdev_<level> when a struct net_device is available. Add pr_fmt and neaten other formats too. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | fec: Convert printks to netdev_<level>Joe Perches2013-04-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use a more current logging message style. Convert the printks where a struct net_device is available to netdev_<level>. Convert the other printks to pr_<level> and add pr_fmt where appropriate. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | fec: Fix PHC device logFabio Estevam2013-04-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently when booting a mx6 device we get the following on boot: registered PHC device on eth%d Fix it by printing the network device name only after it gets registered, so that the following can be read now: fec 2188000.ethernet eth0: registered PHC device 0 Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | ethernet/fec: Add Vybrid family fec supportJingchang Lu2013-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Freescale Vybrid platform implentments MAC-ENET core providing compatibility with half- or full-duplex 10/100 Mbit/s Ethernet LANs. Signed-off-by: Jingchang Lu <b35083@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | net/at91_ether: fix error return code in at91ether_probe()Wei Yongjun2013-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | net: mv643xx_eth: remove deprecated inet_lro supportSebastian Hesselbarth2013-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With recent support for GRO, there is no need to keep both LRO and GRO. This patch therefore removes the deprecated inet_lro support from mv643xx_eth. This is work is based on an experimental patch provided by Eric Dumazet and Willy Tarreau. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Based-on-patch-by: Eric Dumazet <eric.dumazet@gmail.com> Based-on-patch-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | net: ethernet: stmicro: stmmac: use devm_ioremap_resource()Silviu-Mihai Popescu2013-04-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert use of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. This was found with coccinelle. Signed-off-by: Silviu-Mihai Popescu <silviupopescu1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | be2net: remove unused variable 'sge'Ivan Vecera2013-04-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | net: mv643xx_eth: Add GRO supportSebastian Hesselbarth2013-04-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds GRO support to mv643xx_eth by making it invoke napi_gro_receive instead of netif_receive_skb. Signed-off-by: Soeren Moch <smoch@web.de> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | net: mv643xx_eth: use managed devm_kzallocSebastian Hesselbarth2013-04-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves shared private data kzalloc to managed devm_kzalloc and cleans now unneccessary kfree and error handling. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | net: mv643xx_eth: add shared clk and cleanup existing clk handlingSebastian Hesselbarth2013-04-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds an optional shared block clock to avoid lockups on clock gated controllers. Besides the new clock, clock handling for existing clocks is cleaned up and moved to devm_clk_get. Device tree binding documentation is updated for the new clocks property. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | net/mlx4_en: set correct MTU in SRIOVEugenia Emantayev2013-04-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When setting MTU in SRIOV mode add ETH, VLAN and FCS header length to the maximum MTU obtained from QUERY_DEV_CAP. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | net/mlx4_core: Translate guest B0 steering rules to DMFSHadar Hen Zion2013-04-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The different steering modes are global to the device, with DMFS being introduced after SRIOV was merged. Hence, SRIOV guests running legacy / older Linux kernels or non-Linux drivers may provide B0 steering directives when the hypervisor is using DMFS and fail. Under B0 only L2 steering rules are allowed, hence B0 is a subset of DMFS. Use this fact to enable such legacy guests to run by modifying the SRIOV B0 steering wrapper to translate guest B0 directives to DMFS ones when the device uses DMFS. The translated B0 rule has to be kept in the resource tracker as a B0 object to allow for lookup in case of detach. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | net/mlx4_core: Add helper function to translate B0 steering rules to DMFSHadar Hen Zion2013-04-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A pre-step for supporting guests that use B0 steering over a hypervisor that runs in DMFS (device managed flow steering mode). Add helper function which allows to translate L2 attachments / detachments provided in B0 mode to DMFS rules. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | bnx2: make cnic_probe staticstephen hemminger2013-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | tg3: Use bool not intJoe Perches2013-04-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using bool can make code more readable. Convert uses and tests of int to bool. This also makes a comparison of tg3->link_up (itself bool) a bool comparison instead of int. Reorder stack variable declarations to make bool fit declaration holes where appropriate. $ size drivers/net/ethernet/broadcom/tg3.o* text data bss dec hex filename 169958 27249 58896 256103 3e867 drivers/net/ethernet/broadcom/tg3.o.new 169968 27249 58896 256113 3e871 drivers/net/ethernet/broadcom/tg3.o.old Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | tg3: Update version to 3.131Nithin Sujir2013-04-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | tg3: Reset the phy to allow modified EEE settings to take effectNithin Sujir2013-04-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When LFA is enabled, we don't reset the phy. But EEE settings changes don't take effect until the phy is reset. Add a phy reset when we detect a changed EEE setting. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | tg3: Pull the phy advertised speed and flow control settings on driver loadNithin Sujir2013-04-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Normally on driver load, we set the default settings for speed and flow control. However, if the default setting is not compatible with the current link state, we would autonegotiate and cause a link flap. To avoid this, we pull the current advertised settings into the config. A second scenario is if a user changes the speed/duplex/fc settings when the interface is down. In this case we must not pull the settings from the phy and overwrite user settings. We avoid that by checking the USER_CONFIGURED flag. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | tg3: Add support for link flap avoidanceNithin Sujir2013-04-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch and the following two patches add support for link flap avoidance by maintaining the link on power down. This feature is required for management capable devices to have the management connection uninterrupted on driver reload, reboot and interface up/down. The other pros of this feature are - It speeds up boot up time by several seconds as DHCP addresses can be acquired faster. - It avoids lengthy Spanning Tree delay. On powerup the hardware brings up the phy with default settings. If the link is not up, the management software configures the phy to gigabit and starts autonegotiate. Subsequently, as long as the link is up, the driver and management refrain from resetting and/or changing any configuration that the link depends on. The LNK_FLAP_AVOID setting is an NVRAM user configurable bit and is disabled by default. If this setting is enabled, we skip powering down the phy and resetting it. A second NVRAM setting is 1G_ON_VAUX_OK (off by default). This adds support for gigabit link speed when device is on auxiliary power. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | tg3: Add SGMII phy support for 5719/5718 serdesMichael Chan2013-04-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | tg3: Add tg3_clear_mac_status() common functionMichael Chan2013-04-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Refactor for use in the next patch that adds sgmii phy support. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | tg3: Add a warning during link settings change if mgmt enabledNithin Sujir2013-04-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the user executes certain ethtool commands such as -s, -A, -G, -L, -r a phy reset or autonegotiate is performed which results in management traffic being interrupted. Add a warning in these cases. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | tg3: Remove unnecessary phy reset during ethtool commandsNithin Sujir2013-04-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current code unnecessarily resets the phy when we use ethtool to change the ring parameters or flow control settings. Remove the phy reset. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | tg3: Fix NVRAM size detection for the STM45PE20 pinstrap on 5762 devicesMichael Chan2013-04-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The STM45PE20 pinstrap on 5762 devices supports multiple sizes. So treat it just like the ST45_USPT and the size will be read from 0xf0 via tg3_get_nvram_size(). Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | tg3: Fix flow control settings not propagated to hardwareNithin Sujir2013-04-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In tg3_setup_copper_phy(), if autonegotiation is disabled, we need to relink only if the speed or duplex does not match the configured setting. If flow control does not match, a relink is not necessary as flow control is not a PHY setting. Later on, we'll call tg3_setup_flow_ctrl() to set up the MAC to the desired flow control settings if we're in full duplex mode. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | stmmac: prefetch all dma_erx when use extend_descGiuseppe CAVALLARO2013-04-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is to prefetch, in the stmmac_rx, the whole dma_erx descriptor in case of using the extended descriptors. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | stmmac: review private structure fieldsGiuseppe CAVALLARO2013-04-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | recently many new supports have been added in the stmmac driver w/o taking care about where each new field had to be placed inside the private structure for guaranteeing the best cache usage. This is what I wanted in the beginning, so this patch reorganizes all the fields in order to keep adjacent fields for cache effect. I have also tried to optimize them by using pahole. V2: do not abuse with ____cacheline_aligned_in_smp and keep fields that potentially could stay in the same cache-line for better usage in SMP systems. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | stmmac: code tidy-upGiuseppe CAVALLARO2013-04-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch tidies up the code. I have run Linden (and verified with checkpatch) many part of the driver trying to reorganize some sections respecting the codying-style rules in the points where it was not done. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | stmmac: improve/review and fix kernel-docGiuseppe CAVALLARO2013-04-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | this patch reviews/improves and adds some fixes in the code doc. Also kernel-doc passes w/o any warnings. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | stmmac: modified pcs mode support for SGMIIByungho An2013-04-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch modifies the pcs mode support for SGMII. Even though SGMII does auto-negotiation with phy, it needs stmmac_init_phy and stmmac_mdio_register function for initializing phy. Signed-off-by: Byungho An <bh74.an@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | net: mvmdio: get and enable optional clockSebastian Hesselbarth2013-04-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Marvell mdio driver uses internal registers that can be clock gated on some SoCs. This patch just adds optional clock handling, to allow to pass and enable the corresponding clock. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | net: ks8851: Use dev_pm_opsLars-Peter Clausen2013-04-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use dev_pm_ops instead of the deprecated legacy suspend/resume callbacks. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | net: ks8851: Use module_spi_driverLars-Peter Clausen2013-04-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By using module_spi_driver we can eliminate a few lines of boilerplate code. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.2 (git 2.25.0) at 2025-03-24 07:34:10 -0400