aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host
Commit message (Collapse)AuthorAge
...
* ENGR00278646-1 mmc: sdhci: add hooks for platform specific tuningDong Aisheng2014-04-16
| | | | | | | | | The tuning of some platforms may not follow the standard host control spec v3.0, e.g. Freescale uSDHC on i.MX6Q/DL. Add a hook here to allow execute platform specific tuning instead of standard host controller tuning. Signed-off-by: Dong Aisheng <b29396@freescale.com>
* ENGR00278504-2 mmc: sdhci-esdhc-imx: add broken auto cmd23 for imx6qDong Aisheng2014-04-16
| | | | | | | | | | | | The auto cmd23 can not work well on imx6q with an eMMC cards. The error message is: mmc0: Timeout waiting for hardware interrupt The root cause is still unkown. This is a workaround and the quirk will be removed once we find the root cause and fix the issue later. Signed-off-by: Dong Aisheng <b29396@freescale.com>
* ENGR00278504-1 mmc: sdhci: add quirk for broken auto cmd23Dong Aisheng2014-04-16
| | | | | | | The auto cmd23 function on some platforms may not work well, add a quirk to allow them to work without auto cmd23. Signed-off-by: Dong Aisheng <b29396@freescale.com>
* mmc: sdhci: improve card removal check in sdhci_card_event()Shawn Guo2014-04-16
| | | | | | | | | | | | | | | | | | | | | | | | | | Commit 9668d765eab78d58e656177db2acb57c249b9c01 upstream. The following error randomly appears on an imx6q board where gpio is used to implement card-detection when mounting EXT4 rootfs during boot. mmc1: Card removed during transfer! mmc1: Resetting controller. mmcblk0: unknown error -123 sending read/write command, card status 0x900 end_request: I/O error, dev mmcblk0, sector 106744 EXT4-fs error (device mmcblk0p2): ext4_find_entry:1312: inode #5011: comm swapper/0: reading directory lblock 0 It turns out that the error message comes from the card removal check in function sdhci_card_event(). While we have a well implemented function sdhci_do_get_cd() handling all the possible cases of CD, the current code only checks controller internal CD case. That causes problem for other CD cases like gpio on above imx6q board. Improve the check by using sdhci_do_get_cd() to cover all possible CD cases, so that above error on the imx6q board gets fixed. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
* mmc: sdhci: request irq after sdhci_init() is calledShawn Guo2014-04-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Generally request_irq() should be called after hardware has been initialized into a sane state. However, sdhci driver currently calls request_irq() before sdhci_init(). At least, the following kernel panic seen on i.MX6 is caused by that. The sdhci controller on i.MX6 may have noisy glitch on DAT1 line, which will trigger SDIO interrupt handling once request_irq() is called. But at this point, the SDIO interrupt handler host->sdio_irq_thread has not been registered yet. Thus, we see the NULL pointer access with wake_up_process(host->sdio_irq_thread) in mmc_signal_sdio_irq(). sdhci-pltfm: SDHCI platform and OF driver helper mmc0: no vqmmc regulator found mmc0: no vmmc regulator found Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = 80004000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0+ #3 task: 9f860000 ti: 9f862000 task.ti: 9f862000 PC is at wake_up_process+0xc/0x44 LR is at sdhci_irq+0x378/0x93c ... Backtrace: [<8004f75c>] (wake_up_process+0x0/0x44) from [<803fb698>] (sdhci_irq+0x378/0x93c) r4:9fa68000 r3:00000001 [<803fb320>] (sdhci_irq+0x0/0x93c) from [<80075154>] (handle_irq_event_percpu+0x54/0x19c) [<80075100>] (handle_irq_event_percpu+0x0/0x19c) from [<800752ec>] (handle_irq_event+0x50/0x70) [<8007529c>] (handle_irq_event+0x0/0x70) from [<80078324>] (handle_fasteoi_irq+0x9c/0x170) r5:00000001 r4:9f807900 [<80078288>] (handle_fasteoi_irq+0x0/0x170) from [<80074ac0>] (generic_handle_irq+0x28/0x38) r5:8071fd64 r4:00000036 [<80074a98>] (generic_handle_irq+0x0/0x38) from [<8000ee34>] (handle_IRQ+0x54/0xb4) r4:8072ab78 r3:00000140 [<8000ede0>] (handle_IRQ+0x0/0xb4) from [<80008600>] (gic_handle_irq+0x30/0x64) r8:00000036 r7:a080e100 r6:9f863cd0 r5:8072acbc r4:a080e10c r3:00000000 [<800085d0>] (gic_handle_irq+0x0/0x64) from [<8000e0c0>] (__irq_svc+0x40/0x54) ... ---[ end trace e9af3588936b63f0 ]--- Kernel panic - not syncing: Fatal exception in interrupt Fix the panic by simply reverse the calling sequence between request_irq() and sdhci_init(). Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
* mmc: atmel-mci: fix timeout errors in SDIO mode when using DMALudovic Desroches2014-02-13
| | | | | | | | | | | | | | | | commit 66b512eda74d59b17eac04c4da1b38d82059e6c9 upstream. With some SDIO devices, timeout errors can happen when reading data. To solve this issue, the DMA transfer has to be activated before sending the command to the device. This order is incorrect in PDC mode. So we have to take care if we are using DMA or PDC to know when to send the MMC command. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mmc: atmel-mci: fix oops in atmci_tasklet_funcRodolfo Giometti2013-12-04
| | | | | | | | | | | | | | commit fbd986cd420d1deeabf1039ec4e74075a5639db5 upstream. In some cases, a NULL pointer dereference happens because data is NULL when STATE_END_REQUEST case is reached in atmci_tasklet_func. Signed-off-by: Rodolfo Giometti <giometti@enneenne.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mmc: atmel-mci: abort transfer on timeout errorLudovic Desroches2013-12-04
| | | | | | | | | | | | | | | commit c1fa3426aa5c782724c97394303d52228206eda4 upstream. When a software timeout occurs, the transfer is not stopped. In DMA case, it causes DMA channel to be stuck because the transfer is still active causing following transfers to be queued but not computed. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Reported-by: Alexander Morozov <etesial@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mmc: tmio_mmc_dma: fix PIO fallback on SDHISergei Shtylyov2013-09-26
| | | | | | | | | | | | | | | | | | | | commit f936f9b67b7f8c2eae01dd303a0e90bd777c4679 upstream. I'm testing SH-Mobile SDHI driver in DMA mode with a new DMA controller using 'bonnie++' and getting DMA error after which the tmio_mmc_dma.c code falls back to PIO but all commands time out after that. It turned out that the fallback code calls tmio_mmc_enable_dma() with RX/TX channels already freed and pointers to them cleared, so that the function bails out early instead of clearing the DMA bit in the CTL_DMA_ENABLE register. The regression was introduced by commit 162f43e31c5a376ec16336e5d0ac973373d54c89 (mmc: tmio: fix a deadlock). Moving tmio_mmc_enable_dma() calls to the top of the PIO fallback code in tmio_mmc_start_dma_{rx|tx}() helps. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mmc: omap_hsmmc: Skip platform_get_resource_byname() for dt caseSantosh Shilimkar2013-05-26
| | | | | | | | | | | | | MMC driver probe will abort for DT case because of failed platform_get_resource_byname() lookup. Fix it by skipping resource lookup byname for device tree build. Issue is hidden because hwmod populates the IO resources which helps to succeed platform_get_resource_byname() and probe. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: omap_hsmmc: convert to dma_request_slave_channel_compatMatt Porter2013-05-26
| | | | | | | | | | | | Convert dmaengine channel requests to use dma_request_slave_channel_compat(). This supports platforms booting with or without DT populated. Signed-off-by: Matt Porter <mporter@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: omap_hsmmc: Fix the DT pbias workaround for MMC controllers 2 to 5Tony Lindgren2013-05-26
| | | | | | | | | | | | | | | | Otherwise SDIO cards won't necessarily work when booted with device tree as we will never power down the SDIO cards. This means the SDIO card reset does not happen which at least some WLAN controllers expect to happen with ifconfig wlan0 down. The PBIAS voltage is only available for the first controller instance, so let's limit the PBIAS workaround to the first controller only. Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sdhci-pci: add more device idsAdrian Hunter2013-05-26
| | | | | | | Add three more PCI device ids. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sdhci-acpi: add more device idsAdrian Hunter2013-05-26
| | | | | | | | | Add three more ACPI HIDs. Also, as some devices must be further distinguished by ACPI UID, slot information is now associated with HID and UID. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sdhci-acpi: fix initial runtime pm statusAdrian Hunter2013-05-26
| | | | | | | Initial runtime pm status is active. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: atmel-mci: convert to dma_request_slave_channel_compat()Ludovic Desroches2013-05-26
| | | | | | | | | | Use generic DMA DT helper. Platforms booting with or without DT populated are both supported. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sdhci-esdhc-imx: fix multiblock reads on i.MX53Lucas Stach2013-05-26
| | | | | | | | | | | | | | | | | | | The eSDHC controller on the i.MX53 needs an additional, non spec compliant CMD12 after a multiblock read with a predefined number of blocks. Otherwise the internal state machine won't go back to the idle state. This commit effectively reverts 5b6b0ad6 (mmc: sdhci-esdhc-imx: fix for mmc cards on i.MX5), which fixed part of the problem by making multiblock reads work, however this fix was not sufficient when multi- and singleblock reads got intermixed. This implements the recommended workaround (Freescale i.MX Reference Manual, section 29.6.8 "Multi-block Read") by manually sending a CMD12 with the RSPTYP bits cleared. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: sdhci-esdhc-imx: Fix SDIO interruptsMartin Fuzzey2013-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently SDIO interrupts do not work on i.MX53 and maybe others. This was observed with a Marvell 8787 based SDIO wifi adapter using the mwifiex driver and firmware from the Marvell git repository. The symptom was a timeout after firmware download. Observing the SDIO_DAT1 line showed that an interrupt was requested (level 0) but no interrupt was generated in software, the line stayed low until a timeout ocurred and the card was reset. There is a Freescale errata ENGcm11186 "eSDHC misses SDIO interrupt when CINT is disabled" The workaround suggested by this errata is already implemented and involves clearing and then setting the D3CD bit in the host control register [see esdhc_writel_le()] However, when esdhc_writeb_le() is later used to write to SDHCI_HOST_CONTROL it always resets the D3CD bit. To fix this simply add the D3CD bit to the set of bits not modified by esdhc_writeb_le(). Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds2013-05-15
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM fixes from Russell King: "A small number of fixes for stuff from the last merge window, and in one case (IRQ time accounting) the previous merge window." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7720/1: ARM v6/v7 cmpxchg64 shouldn't clear upper 32 bits of the old/new value ARM: 7715/1: MCPM: adapt to GIC changes after upstream merge ARM: 7714/1: mmc: mmci: Ensure return value of regulator_enable() is checked ARM: 7712/1: Remove trailing whitespace in arch/arm/Makefile ARM: 7711/1: dove: fix Dove cpu type from V7 to PJ4 ARM: finally enable IRQ time accounting config
| * ARM: 7714/1: mmc: mmci: Ensure return value of regulator_enable() is checkedLee Jones2013-05-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch suppresses the warning below: drivers/mmc/host/mmci.c: In function ‘mmci_set_ios’: drivers/mmc/host/mmci.c:1165:20: warning: ignoring return value of ‘regulator_enable’, declared with attribute warn_unused_result [-Wunused-result] Cc: Chris Ball <cjb@laptop.org> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge tag 'dt-for-linus-2' of ↵Linus Torvalds2013-05-07
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree updates (part 2) from Arnd Bergmann: "These are mostly new device tree bindings for existing drivers, as well as changes to the device tree source files to add support for those devices, and a couple of new boards, most notably Samsung's Exynos5 based Chromebook. The changes depend on earlier platform specific updates and touch the usual platforms: omap, exynos, tegra, mxs, mvebu and davinci." * tag 'dt-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits) ARM: exynos: dts: cros5250: add EC device ARM: dts: Add sbs-battery for exynos5250-snow ARM: dts: Add i2c-arbitrator bus for exynos5250-snow ARM: dts: add mshc controller node for Exynos4x12 SoCs ARM: dts: Add chip-id controller node on Exynos4/5 SoC ARM: EXYNOS: Create virtual I/O mapping for Chip-ID controller using device tree ARM: davinci: da850-evm: add SPI flash support ARM: davinci: da850: override SPI DT node device name ARM: davinci: da850: add SPI1 DT node spi/davinci: add DT binding documentation spi/davinci: no wildcards in DT compatible property ARM: dts: mvebu: Convert mvebu device tree files to 64 bits ARM: dts: mvebu: introduce internal-regs node ARM: dts: mvebu: Convert all the mvebu files to use the range property ARM: dts: mvebu: move all peripherals inside soc ARM: dts: mvebu: fix cpus section indentation ARM: davinci: da850: add EHRPWM & ECAP DT node ARM/dts: OMAP3: fix pinctrl-single configuration ARM: dts: Add OMAP3430 SDP NOR flash memory binding ARM: dts: Add NOR flash bindings for OMAP2420 H4 ...
| * \ Merge tag 'davinci-for-v3.10/dt-2-v2' of ↵Olof Johansson2013-04-18
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt2 From Sekhar Nori: v3.10 DT updates for DaVinci This set of patches adds support for PWMs and SPI controller present on DA850 and for SPI flash present on DA850 EVM. * tag 'davinci-for-v3.10/dt-2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci: da850-evm: add SPI flash support ARM: davinci: da850: override SPI DT node device name ARM: davinci: da850: add SPI1 DT node spi/davinci: add DT binding documentation spi/davinci: no wildcards in DT compatible property ARM: davinci: da850: add EHRPWM & ECAP DT node ARM: davinci: da850: override mmc DT node device name ARM: davinci: da850: add mmc DT entries mmc: davinci_mmc: add DT support ARM: davinci: da850: add tps6507x regulator DT data ARM: regulator: add tps6507x device tree data ARM: davinci: remove test for undefined Kconfig macro ARM: davinci: mmc: derive version information from device name ARM: davinci: da850: add ECAP & EHRPWM clock nodes ARM: davinci: clk framework support for enable/disable functionality Signed-off-by: Olof Johansson <olof@lixom.net>
| * \ \ Merge tag 'dt-exynos-for-v3.10' of ↵Olof Johansson2013-04-13
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt2 update device tree for exynos4 and exynos5 * tag 'dt-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (125 commits) ARM: dts: add PDMA0 changes for exynos5440 ARM: dts: Add cpufreq controller node for Exynos5440 SoC ARM: dts: Fix gmac clock ids due to changes in Exynos5440 ARM: dts: add device tree file for SD5v1 board ARM: dts: update bootargs to boot from sda2 for exynos5440-ssdk5440 ARM: dts: add PMU support in exynos5440 ARM: dts: Add node for GMAC for exynos5440 ARM: dts: list the interrupts generated by pin-controller on Exynos5440 ARM: dts: Add FIMD DT binding Documentation ARM: dts: Add FIMD node and display timing node to exynos4412-origen.dts ARM: dts: Add FIMD node to exynos4 ARM: dts: Add SYSREG block node for S5P/Exynos4 SoC series ARM: dts: Add display timing node to exynos5250-smdk5250.dts ARM: dts: Add FIMD node to exynos5 ARM: dts: Add virtual GIC DT bindings for exynos5440 ARM: dts: Document usb clocks in samsung,exynos4210-ehci/ohci bindings ARM: dts: add usb 2.0 clock references to exynos5250 device tree ARM: dts: Add architected timer nodes for exynos5250 ARM: dts: Declare the gic as a15 compatible for exynos5250 ARM: dts: Add HDMI HPD and regulator node for Arndale board ... Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | | mmc: mxs-mmc: move to use generic DMA helperShawn Guo2013-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the generic DMA device tree helper supported by mxs-dma driver, client devices only need to call dma_request_slave_channel() for requesting a DMA channel from dmaengine. Since mxs is a DT only platform now, along with the changes, the non-DT case checking in probe function also gets cleaned up. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Chris Ball <cjb@laptop.org> Cc: linux-mmc@vger.kernel.org Reviewed-by: Arnd Bergmann <arnd@arndb.de>
* | | | | Merge tag 'mmc-updates-for-3.10-rc1' of ↵Linus Torvalds2013-05-04
|\ \ \ \ \ | |_|_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC update from Chris Ball: "MMC highlights for 3.10: Core: - Introduce MMC_CAP2_NO_PRESCAN_POWERUP to allow skipping mmc_power_up() at boot/initialization time if it's already happened, for performance (faster boot time) reasons. - Fix a bit width test failure that resulted in old eMMC cards being put into 1-bit mode when 4-bit mode was available. - Expose fwrev/hwrev for MMCv4 parts. - Improve card removal logic in the case where the card's removed slowly; we were missing card removal events if the card retained contact with the slot pads for long enough to reply to a CMD13 while being removed. Drivers: - davinci_mmc: Support using PIO instead of DMA. - dw_mmc: Add support for Exynos4412. - mxcmmc: DT support, use slot-gpio API. - mxs-mmc: Add broken-cd/cd-inverted/non-removable DT property support. - sdhci-sirf: New sdhci-pltfm driver for CSR SiRF SoCs: SiRFprimaII: unicore ARM Cortex-A9 SiRFatlas6: unicore ARM Cortex-A9 SiRFmarco: dual core ARM Cortex-A9 SMP - sdhci-tegra: Add support for Tegra114 platforms, use mmc_of_parse()" * tag 'mmc-updates-for-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (66 commits) mmc: sdhci-tegra: fix MODULE_DEVICE_TABLE mmc: core: fix init controller performance regression, updated patch mmc: mxcmmc: enable DMA support on mpc512x mmc: mxcmmc: constify mxcmci_devtype mmc: mxcmmc: use slot-gpio API for write-protect detection mmc: mxcmmc: add mpc512x SDHC support mmc: mxcmmc: fix race conditions for host->req and host->data access mmc: mxcmmc: DT support mmc: dw_mmc: let device core setup the default pin configuration mmc: mxs-mmc: add broken-cd property mmc: mxs-mmc: add non-removable property mmc: mxs-mmc: add cd-inverted property mmc: core: call pm_runtime_put_noidle in pm_runtime_get_sync failed case mmc: mxcmmc: Fix bug when card is present during boot mmc: core: fix performance regression initializing MMC host controllers Revert "mmc: core: wait while adding MMC host to ensure root mounts successfully" mmc: atmel-mci: pio hang on block errors mmc: core: Fix bit width test failing on old eMMC cards mmc: dw_mmc: Use pr_info instead of printk mmc: dw_mmc: Check return value of regulator_enable ...
| * | | | mmc: sdhci-tegra: fix MODULE_DEVICE_TABLEArnd Bergmann2013-04-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The symbol referenced in MODULE_DEVICE_TABLE must match the actual table, otherwise we get a build error like: sdhci-tegra.c:206:34: error: '__mod_of_device_table' aliased to undefined symbol 'sdhci_dt_ids' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Stephen Warren <swarren@nvidia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | mmc: core: fix init controller performance regression, updated patchAdrian Hunter2013-04-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add MMC_CAP2_NO_PRESCAN_POWERUP to sdhci-pci.c also, use mmc_power_off() for MMC_CAP2_NO_PRESCAN_POWERUP. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> [cjb: previously applied v1 of this patch instead of v4] Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | mmc: mxcmmc: enable DMA support on mpc512xAnatolij Gustschin2013-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add SDHC DMA channel description to the mpc512x device tree to enable slave channel requesting in the mxcmmc driver. mpc512x DMA engine doesn't support endianness conversion when reading/writing data from peripheral's FIFO, so we have to swap data buffers before each DMA write and after each DMA read transfer manually. Since chained SDHC DMA transfers are not supported on mpc512x, limit 'max_segs' tunable parameter to one and initialise it to 64 only when running on i.MX platforms. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | mmc: mxcmmc: constify mxcmci_devtypeAnatolij Gustschin2013-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mxcmci_devtype struct contains constant data, so constify this struct. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | mmc: mxcmmc: use slot-gpio API for write-protect detectionAnatolij Gustschin2013-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | slot-gpio API suppors read-only detection when "wp-gpios" property is present in the device tree mmc node. Use this API for write-protect detection. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | mmc: mxcmmc: add mpc512x SDHC supportAnatolij Gustschin2013-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SDHC controller on mpc512x is compatible with i.MX31 SDHC, so the mxcmmc driver can be used on mpc512x, too. Extend the driver to support mpc512x as well. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | mmc: mxcmmc: fix race conditions for host->req and host->data accessAnatolij Gustschin2013-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mxcmci_dma_callback() is invoked by DMA drivers in soft-irq context and can be interrupted by the mxcmci_irq() interrupt which can finish the mmc request or data transfer and set host->req or host->data pointers to NULL. Then mxcmci_data_done() crashes with a null pointer dereferences. Protect all accesses to host->req and host->data by spin locks. Also check host->data pointer in mxcmci_watchdog() before dereferencing it. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | mmc: mxcmmc: DT supportMarkus Pargmann2013-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding devicetree support for imx21-mmc and imx31-mmc. Based on generic gpio helper functions by Guennadi and generic DMA devicetree bindings. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | mmc: dw_mmc: let device core setup the default pin configurationThomas Abraham2013-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With device core now able to setup the default pin configuration, the pin configuration code based on the deprecated Samsung specific gpio bindings is removed. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | mmc: mxs-mmc: add broken-cd propertyHector Palacios2013-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to bindings documentation for mmc, the property 'broken-cd' can be used to indicate card-detection is not available and polling must be used instead. This patch retrieves this property and sets a custom flag. On the get_cd() hook, it returns 1 if the flag is set, to always assume the card is present. Signed-off-by: Hector Palacios <hector.palacios@digi.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | mmc: mxs-mmc: add non-removable propertyMarc Kleine-Budde2013-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some boards have non removable cards like eMMC. Handle such case. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | mmc: mxs-mmc: add cd-inverted propertyMarc Kleine-Budde2013-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The card-detect GPIO is inverted on some boards. Handle such case. Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | mmc: mxcmmc: Fix bug when card is present during bootAlexander Shiyan2013-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes bug when card is present during boot. Bug was introduced due commit "mmc: mxcmmc: fix bug that may block a data transfer forever". When a card is present "mxcmci_setup_data" function is executed, but the timer is not initialized. ... i.MX SDHC driver mmc0: SD Status: Invalid Allocation Unit size. mmc0: new SD card at address b368 mmcblk0: mmc0:b368 SDC 1.91 GiB ------------[ cut here ]------------ kernel BUG at kernel/timer.c:729! Internal error: Oops - BUG: 0 [#1] PREEMPT ARM CPU: 0 Not tainted (3.9.0-rc5-next-20130404 #2) PC is at mod_timer+0x168/0x198 LR is at mxcmci_request+0x21c/0x328 ... Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | mmc: core: fix performance regression initializing MMC host controllersAdrian Hunter2013-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit fa5501890d8974301042e0202d342a6cbe8609f4 introduced a performance regression by adding mmc_power_up() to mmc_start_host(). mmc_power_up() is not necessary to host controller initialization, it is part of card initialization and is performed anyway asynchronously. This patch allows a driver to leave the power up in asynchronous code (as it was before). On my current target platform this reduces driver initialization from: [ 1.313220] initcall sdhci_acpi_driver_init+0x0/0x12 returned 0 after 102008 usecs to this: [ 1.217209] initcall sdhci_acpi_driver_init+0x0/0x12 returned 0 after 8331 usecs Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | mmc: atmel-mci: pio hang on block errorsTerry Barnaby2013-04-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver is doing, by default, multi-block reads. When a block error occurs, card/block.c instigates a single block read: "mmcblk0: retrying using single block read". It leaves the sg chain intact and just changes the length attribute for the first sg entry and the overall sg_len parameter. When atmci_read_data_pio is called to read the single block of data it ignores the sg_len and expects to read more than 512 bytes as it sees there are multiple items in the sg list. No more data comes as the controller has only been commanded to get one block. Signed-off-by: Terry Barnaby <terry@beam.ltd.uk> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: stable <stable@vger.kernel.org> # 3.2+ Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | mmc: dw_mmc: Use pr_info instead of printkSachin Kamat2013-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pr_info(... is preferred to printk(KERN_INFO ... Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | mmc: dw_mmc: Check return value of regulator_enableSachin Kamat2013-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | regulator_enable() is declared with __must_check attribute. Hence check the return value to ensure that the regulator is enabled. Fixes the following warning: drivers/mmc/host/dw_mmc.c:2461:19: warning: ignoring return value of ‘regulator_enable’, declared with attribute warn_unused_result [-Wunused-result] drivers/mmc/host/dw_mmc.c: In function ‘dw_mci_init_slot’: drivers/mmc/host/dw_mmc.c:1994:19: warning: ignoring return value of ‘regulator_enable’, declared with attribute warn_unused_result [-Wunused-result] Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | mmc: sdhci-spear: add CONFIG_PM_SLEEP to suspend/resume functionsJingoo Han2013-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/mmc/host/sdhci-spear.c:295:12: warning: 'sdhci_suspend' defined but not used [-Wunused-function] drivers/mmc/host/sdhci-spear.c:308:12: warning: 'sdhci_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | mmc: dw_mmc: control the power-enable registerJaehoon Chung2013-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When card is power-on/off, need to control the power-enable register. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | mmc: sdhci-pxav3: controller should use SDCLK for timeout calculationKevin Liu2013-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sdhci-pxav3 host controller used SDCLK for data timeout. Signed-off-by: Kevin Liu <kliu5@marvell.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | mmc: sdhci-pxav3: enhance device tree parser codeKevin Liu2013-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. seperate device tree parsing from platform data handling which can make further work easy when platform data can be removed. 2. add calling mmc_of_parse which can parse more of property and pxav3_get_mmc_pdata can be shrinked a lot. Signed-off-by: Kevin Liu <kliu5@marvell.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | mmc: sdhci-pxav3: remove cd-broken quirk for permanently present cardKevin Liu2013-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Flag PXA_FLAG_CARD_PERMANENT is set in sdhci_pxa_platdata flags to indicate that the card is always wired to host, like on-chip emmc, which is permanently present and don't need detection. So only MMC_CAP_NONREMOVABLE should be set for this case. But current code also sets SDHCI_QUIRK_BROKEN_CARD_DETECTION, which doesn't make sense. Signed-off-by: Kevin Liu <kliu5@marvell.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | mmc: sdhci-pxav3: transfer sdhci_pltfm_data as args to sdhci_pltfm_initKevin Liu2013-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sdhci_pltfm_init can set host->ops and host->quirks if sdhci_pltfm_data is transfered as arguments. Then no need to set them manually in sdhci_pxav3_probe. Signed-off-by: Kevin Liu <kliu5@marvell.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | mmc: dw_mmc: fix fifo access for 64-bitSeungwon Jeon2013-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mci_writew causes a failure of fifo access for 64-bit. mci_writeq is correct. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | | | mmc: mvsdio: use dev_*() API instead of pr_*() APIThomas Petazzoni2013-03-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mvsdio driver was already using some dev_*() functions to print some messages, but still using pr_*() functions for some others. This patch converts all messages to use dev_*() functions. Many of the pr_*() function calls were printing the output of mmc_hostname() to preprend the message with an identifier for the device. Since the dev_*() functions do that automatically, this patch also gets rid of those string prefixes. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Chris Ball <cjb@laptop.org>
generated by cgit v1.2.2 (git 2.25.0) at 2025-08-14 22:23:11 -0400