aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/ulp/srp
Commit message (Collapse)AuthorAge
* IB/srp: Sync buffer before posting sendDavid Dillow2010-10-25
| | | | | | | | srp_send_tsk_mgmt() was missing the proper DMA sync calls before posting the buffer to the device. Signed-off-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/srp: Use list_first_entry()Bart Van Assche2010-10-25
| | | | | | | | | | Use the list_first_entry() macro in ib_srp instead of open-coding the equivalent, which makes the source code slightly more descriptive. The list_first_entry() macro itself was introduced in kernel 2.6.22. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/srp: Reduce number of BUSY conditionsBart Van Assche2010-10-25
| | | | | | | | | | | | | As proposed by the SRP (draft) standard, ib_srp reserves one ring element for SRP_TSK_MGMT requests. This patch makes sure that the SCSI mid-layer never tries to queue more than (SRP request limit) - 1 SCSI commands to ib_srp. This improves performance for targets whose request limit is less than or equal to SRP_NORMAL_REQ_SQ_SIZE by reducing the number of BUSY responses reported by ib_srp to the SCSI mid-layer. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/srp: Eliminate two forward declarationsDavid Dillow2010-10-25
| | | | | Signed-off-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/srp: Implement SRP_CRED_REQ and SRP_AER_REQDavid Dillow2010-10-23
| | | | | | | | | | | | | | | | | This patch adds support for SRP_CRED_REQ to avoid a lockup by targets that use that mechanism to return credits to the initiator. This prevents a lockup observed in the field where we would never add the credits from the SRP_CRED_REQ to our current count, and would therefore never send another command to the target. Minimal support for SRP_AER_REQ is also added, as these messages can also be used to convey additional credits to the initiator. Based upon extensive debugging and code by Bart Van Assche and a bug report by Chris Worley. Signed-off-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/srp: Preparation for transmit ring response allocationBart Van Assche2010-10-23
| | | | | | | | | | | | | The transmit ring in ib_srp (srp_target.tx_ring) is currently only used for allocating requests sent by the initiator to the target. This patch prepares using that ring for allocation of both requests and responses. Also, this patch differentiates the uses of SRP_SQ_SIZE, increases the size of the IB send completion queue by one element and reserves one transmit ring slot for SRP_TSK_MGMT requests. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/srp: Export req_lim via sysfsBart Van Assche2010-08-04
| | | | | | | | Export req_lim via sysfs for debugging. Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com> Acked-by: David Dillow <dave@thedillows.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/srp: Make receive buffer handling more robustBart Van Assche2010-08-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current strategy in ib_srp for posting receive buffers is: * Post one buffer after channel establishment. * Post one buffer before sending an SRP_CMD or SRP_TSK_MGMT to the target. As a result, only the first non-SRP_RSP information unit from the target will be processed. If that first information unit is an SRP_T_LOGOUT, it will be processed. On the other hand, if the initiator receives an SRP_CRED_REQ or SRP_AER_REQ before it receives a SRP_T_LOGOUT, the SRP_T_LOGOUT won't be processed. We can fix this inconsistency by changing the strategy for posting receive buffers to: * Post all receive buffers after channel establishment. * After a receive buffer has been consumed and processed, post it again. A side effect is that the ib_post_recv() call is moved out of the SCSI command processing path. Since __srp_post_recv() is not called directly any more, get rid of it and move the code directly into srp_post_recv(). Also, move srp_post_recv() up in the file to avoid a forward declaration. Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com> Acked-by: David Dillow <dave@thedillows.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/srp: Use print_hex_dump()Bart Van Assche2010-08-04
| | | | | | | | Replace an open-coded dump of the receive buffer with a call to print_hex_dump(). Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/srp: Clean up error path in srp_create_target_ib()Roland Dreier2010-03-02
| | | | | | | Instead of repeating the error unwinding steps in each place an error can be detected, use the common idiom of gotos into an error flow. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/srp: Split send and recieve CQs to reduce number of interruptsBart Van Assche2010-03-02
| | | | | | | | | | | | We can reduce the number of IB interrupts from two interrupts per srp_queuecommand() call to one by using separate CQs for send and receive completions and processing send completions by polling every time a TX IU is allocated. Receive completion events still trigger an interrupt. Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* infiniband: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers2009-01-06
| | | | | | Acked-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* net: replace %p6 with %pI6Harvey Harrison2008-10-29
| | | | | Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* infiniband: use %p6 for printing message idsHarvey Harrison2008-10-29
| | | | | Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vfs: Use const for kernel parser tableSteven Whitehouse2008-10-13
| | | | | | | | | | | | | | This is a much better version of a previous patch to make the parser tables constant. Rather than changing the typedef, we put the "const" in all the various places where its required, allowing the __initconst exception for nfsroot which was the cause of the previous trouble. This was posted for review some time ago and I believe its been in -mm since then. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Alexander Viro <aviro@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* RDMA: Remove subversion $Id tagsRoland Dreier2008-07-15
| | | | | | They don't get updated by git and so they're worse than useless. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/srp: Remove use of cached P_Key/GID queriesRoland Dreier2008-07-15
| | | | | | | | | | | The SRP initiator is currently using ib_find_cached_pkey() and ib_get_cached_gid() in situations where the uncached ib_find_pkey() and ib_query_gid() functions serve just as well: sleeping is allowed and performance is not an issue. Since we want to eliminate the cached operations in the long term, convert SRP to use the uncached variants. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* SCSI: convert struct class_device to struct deviceTony Jones2008-04-19
| | | | | | | | | | | | | It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* IB: rename "dev" to "srp_dev" in srp_host structureGreg Kroah-Hartman2008-04-19
| | | | | | | | | | | | | | | | This sets us up to be able to convert the srp_host to use a struct device instead of a class_device. Based on a original patch from Tony Jones, but split up into this piece by Greg. Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Reviewed-by: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* IB/srp: Enforce protocol limit on srp_sg_tablesizeDavid Dillow2008-04-17
| | | | | | | | | | | | | | The current SRP initiator will allow unlimited s/g entries in the indirect descriptors lists, but the entry count field in the SRP_CMD request is 8 bits, so setting srp_sg_tablesize too large will open the possibility of wrapping the count and generating invalid requests. Clamp srp_sg_tablesize to the protocol limits to prevent surprises. Reported by Martin W. Schlining III <mschlining@datadirectnet.com>. Signed-off-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/srp: Retry stale connectionsDavid Dillow2008-02-04
| | | | | | | | | | | | | | | When a host just goes away (crash, power loss, etc.) without tearing down its IB connections, it can get stale connection errors when it tries to reconnect to targets upon rebooting. Retrying the connection a few times will prevent sysadmins from playing the "which disk(s) went missing?" game. This would have made things slightly quicker when tracking down some of the recent bugs, but it also helps quite a bit when you've got a large number of targets hanging off a wedged server. Signed-off-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* [SCSI] remove use_sg_chainingJames Bottomley2008-01-30
| | | | | | | | | | | With the sg table code, every SCSI driver is now either chain capable or broken (or has sg_tablesize set so chaining is never activated), so there's no need to have a check in the host template. Also tidy up the code by moving the scatterlist size defines into the SCSI includes and permit the last entry of the scatterlist pools not to be a power of two. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* IB/srp: Add identifying information to log messagesDavid Dillow2008-01-25
| | | | | | | | | | | | | When you have multiple targets, it gets really confusing when you try to track down who did a reset when there is no identifying information in the log message, especially when the same extension ID is mapped through two different local IB ports. So, add an identifier that can be used to track back to which local IB port/remote target pair is the one having problems. Signed-off-by: David Dillow <dillowda@ornl.gov> Acked-by: Pete Wyckoff <pw@osc.edu> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/srp: Enable SG list chainingDavid Dillow2008-01-25
| | | | | | | | | | | | | | | | | | | By default, the SCSI mid-layer seems to send down 512KB requests (sg_tablesize = 256), with some requests occasionally combined. By allowing the mid-layer to chain requests, we can easily grow to 1024KB or larger -- I've tested 4096KB I/O requests with no problems. I looked through the DMA paths on the hardware drivers to ensure they could take advantage of the SG chaining, and it seems that every one except ipath uses the system's DMA routines, which have been converted to handle chaining. ipath looks like it should be OK, but I have no way to test it. Signed-off-by: David Dillow <dillowda@ornl.gov> [ Tested on ipath. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/srp: Respect target credit limitDavid Dillow2008-01-25
| | | | | | | | | | | | | | | | | | | The current SRP initiator will send requests even if it has no credits available. The results of sending extra requests are vendor specific, but on some devices, overrunning credits will cost 85% of peak performance -- e.g. 100 MB/s vs 720 MB/s. Other devices may just drop the requests. This patch will tell the SCSI midlayer to queue requests if there are fewer than two credits remaining, and will not issue a task management request if there are no credits remaining. The mid-layer will retry the queued command once an outstanding command completes. The patch also removes the unlikely() in __srp_get_tx_iu(), as it is not at all unlikely to hit this limit under heavy load. Signed-off-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/srp: Release transport before removing hostDave Dillow2008-01-08
| | | | | | | | | | | The documented call sequence for removing a host is to call the transport xxx_remove_host() prior to scsi_remove_host(). The SRP transport used to crash when that order was followed, but as it is now fixed, use the documented order. Signed-off-by: David Dillow <dillowda@ornl.gov> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/srp: Fix list corruption/oops on module reloadDavid Dillow2008-01-03
| | | | | | | | | Add a missing call to srp_remove_host() in srp_remove_one() so that we don't leak SRP transport class list entries. Tested-by: David Dillow <dillowda@ornl.gov> Acked-by: FUJITA Tomonori <tomof@acm.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2007-10-15
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (207 commits) [SCSI] gdth: fix CONFIG_ISA build failure [SCSI] esp_scsi: remove __dev{init,exit} [SCSI] gdth: !use_sg cleanup and use of scsi accessors [SCSI] gdth: Move members from SCp to gdth_cmndinfo, stage 2 [SCSI] gdth: Setup proper per-command private data [SCSI] gdth: Remove gdth_ctr_tab[] [SCSI] gdth: switch to modern scsi host registration [SCSI] gdth: gdth_interrupt() gdth_get_status() & gdth_wait() fixes [SCSI] gdth: clean up host private data [SCSI] gdth: Remove virt hosts [SCSI] gdth: Reorder scsi_host_template intitializers [SCSI] gdth: kill gdth_{read,write}[bwl] wrappers [SCSI] gdth: Remove 2.4.x support, in-kernel changelog [SCSI] gdth: split out pci probing [SCSI] gdth: split out eisa probing [SCSI] gdth: split out isa probing gdth: Make one abuse of scsi_cmnd less obvious [SCSI] NCR5380: Use scsi_eh API for REQUEST_SENSE invocation [SCSI] usb storage: use scsi_eh API in REQUEST_SENSE execution [SCSI] scsi_error: Refactoring scsi_error to facilitate in synchronous REQUEST_SENSE ...
| * [SCSI] transport_srp: add rport roles attributeFUJITA Tomonori2007-10-12
| | | | | | | | | | | | | | | | | | | | This adds a 'roles' attribute to rport like transport_fc. The role can be initiator or target. That is, the initiator driver creates target remote ports and the target driver creates initiator remote ports. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] ib_srp: convert to use the srp transport classFUJITA Tomonori2007-10-12
| | | | | | | | | | | | | | | | | | | | This converts ib_srp to use the srp transport class. I don't have ib hardware so I've not tested this patch. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* | IB/srp: Add QoS support through service IDSean Hefty2007-10-09
| | | | | | | | | | | | | | | | Provide the target service ID when performing a path record query to support optional QoS capability. QoS requires support from the SA. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* | IB/srp: Add OUI for new Cisco targetsRaghava Kondapalli2007-08-03
| | | | | | | | | | | | | | New Cisco IB SRP targets use the Cisco OUI 00-1b-0d but still need the Topspin workarounds. Add this OUI to srp_target_is_topspin(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
* | IB/srp: Wrap OUI checking for workarounds in helper functionsRoland Dreier2007-08-03
|/ | | | | | | | | Wrap the checking for Mellanox and Topspin OUIs to decide whether to use a workaround into helper functions. This will make it cleaner to add a new OUI to check (as we need to do now that some targets with a Cisco OUI still need the Topspin workarounds). Signed-off-by: Roland Dreier <rolandd@cisco.com>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2007-07-15
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (166 commits) [SCSI] ibmvscsi: convert to use the data buffer accessors [SCSI] dc395x: convert to use the data buffer accessors [SCSI] ncr53c8xx: convert to use the data buffer accessors [SCSI] sym53c8xx: convert to use the data buffer accessors [SCSI] ppa: coding police and printk levels [SCSI] aic7xxx_old: remove redundant GFP_ATOMIC from kmalloc [SCSI] i2o: remove redundant GFP_ATOMIC from kmalloc from device.c [SCSI] remove the dead CYBERSTORMIII_SCSI option [SCSI] don't build scsi_dma_{map,unmap} for !HAS_DMA [SCSI] Clean up scsi_add_lun a bit [SCSI] 53c700: Remove printk, which triggers because of low scsi clock on SNI RMs [SCSI] sni_53c710: Cleanup [SCSI] qla4xxx: Fix underrun/overrun conditions [SCSI] megaraid_mbox: use mutex instead of semaphore [SCSI] aacraid: add 51245, 51645 and 52245 adapters to documentation. [SCSI] qla2xxx: update version to 8.02.00-k1. [SCSI] qla2xxx: add support for NPIV [SCSI] stex: use resid for xfer len information [SCSI] Add Brownie 1200U3P to blacklist [SCSI] scsi.c: convert to use the data buffer accessors ...
| * [SCSI] ib_srp: convert to use the data buffer accessorsFUJITA Tomonori2007-06-07
| | | | | | | | | | | | | | | | | | | | | | | | | | - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Roland Dreier <rdreier@cisco.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* | IB: Use menuconfig for InfiniBand menuJan Engelhardt2007-07-09
|/ | | | | | | | | | Change Kconfig objects from "menu, config" into "menuconfig" so that the user can disable the whole feature without having to enter the menu first. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB: Add CQ comp_vector supportMichael S. Tsirkin2007-05-07
| | | | | | | | | | | | | | | | | | | | | Add a num_comp_vectors member to struct ib_device and extend ib_create_cq() to pass in a comp_vector parameter -- this parallels the userspace libibverbs API. Update all hardware drivers to set num_comp_vectors to 1 and have all ULPs pass 0 for the comp_vector value. Pass the value of num_comp_vectors to userspace rather than hard-coding a value of 1. We want multiple CQ event vector support (via MSI-X or similar for adapters that can generate multiple interrupts), but it's not clear how many vectors we want, or how we want to deal with policy issues such as how to decide which vector to use or how to set up interrupt affinity. This patch is useful for experimenting, since no core changes will be necessary when updating a driver to support multiple vectors, and we know that we want to make at least these changes anyway. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/srp: Set proc_nameRoland Dreier2007-05-07
| | | | Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/srp: Add orig_dgid sysfs attribute to scsi_hostIshai Rabinovitz2007-05-07
| | | | | | | | | | Add an orig_dgid attribute in sysfs for SRP scsi_hosts, so that userspace can tell what the original dgid value written to the add_target file was, even if the connection is redirected to a different port while connecting. Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/srp: Don't wait for response when QP is in error state.Ishai Rabinovitz2007-02-04
| | | | | | | | | | | | | | | When there is a call to send_tsk_mgmt SRP posts a send and waits for 5 seconds to get a response. When the QP is in the error state it is obvious that there will be no response so it is quite useless to wait. In fact, the timeout causes SRP to wait a long time to reconnect when a QP error occurs. (Each abort and each reset_device calls send_tsk_mgmt, which waits for the timeout). The following patch solves this problem by identifying the failure and returning an immediate error code. Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/srp: Check match_strdup() returnIshai Rabinovitz2007-01-22
| | | | | | | | Checks if the kmalloc in match_strdup() was successful, and bail out on looking at the token if it failed. Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/srp: Fix FMR mapping for 32-bit kernels and addresses above 4GRoland Dreier2006-12-15
| | | | | | | | | | | | | | | | struct srp_device.fmr_page_mask was unsigned long, which means that the top part of addresses above 4G was being chopped off on 32-bit architectures. Of course nothing good happens when data from SRP targets is DMAed to the wrong place. Fix this by changing fmr_page_mask to u64, to match the addresses actually used by IB devices. Thanks to Brian Cain <Brian.Cain@ge.com> and David McMillen <davem@systemfabricworks.com> for help diagnosing the bug and testing the fix. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/srp: Use new verbs IB DMA mapping functionsRalph Campbell2006-12-12
| | | | | | | | Convert SRP to use the new verbs DMA mapping functions for kernel verbs consumers. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* Merge branch 'master' of ↵David Howells2006-12-05
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/infiniband/core/iwcm.c drivers/net/chelsio/cxgb2.c drivers/net/wireless/bcm43xx/bcm43xx_main.c drivers/net/wireless/prism54/islpci_eth.c drivers/usb/core/hub.h drivers/usb/input/hid-core.c net/core/netpoll.c Fix up merge failures with Linus's head and fix new compilation failures. Signed-Off-By: David Howells <dhowells@redhat.com>
| * IB/srp: Fix memory leak on reconnectVu Pham2006-11-29
| | | | | | | | | | | | | | | | | | SRP reallocates the IU buffers for tx_ring and rx_ring without freeing the old buffers when it reconnects to a target. Fix this by keeping the old IU buffers around. Signed-off-by: Vu Pham <vu@mellanox.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * IB/srp: Increase supported CDB sizeArne Redlich2006-11-29
| | | | | | | | | | | | | | | | | | Set the Scsi_Host's max_cmd_len from 12 (default) to 16 for SRP. Otherwise scsi_dispatch_cmd() won't pass down certain commands such as READ CAPACITY 16, required for supporting disks > 2TB. Signed-off-by: Arne Redlich <arne.redlich@xiranet.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* | WorkStruct: make allyesconfigDavid Howells2006-11-22
|/ | | | | | Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
* IB/srp: Enable multiple connections to the same targetIshai Rabinovitz2006-10-10
| | | | | | | | | | | | | | | | | | | Enable multiple concurrent connections to the same SRP target: 1) Use port GUID instead of node GUID in the initiator port identifier. This allows connections to be made from multiple HCA ports at the same time. 2) Let the user specify the identifier extention when adding the device. This allows userspace to make multiple connections even from the same port, if it wants too. Without this, only one connection can be made from any given HCA, even if it has multiple ports, because we don't use multi-channel mode, so targets will only allow one connection from a given initiator port ID. Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/srp: Remove redundant memset()Ishai Rabinovitz2006-10-10
| | | | | | | | | scsi_host_alloc() already allocates with kzalloc(), so the struct Scsi_Host is zeroed out, including the private data portion. Remove the redundant memset that zeros this out again in the SRP initiator. Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/sa: Require SA registrationMichael S. Tsirkin2006-09-22
| | | | | | | | | | Require users to register with SA module, to prevent the sa_query module text from going away while an SA query callback is still running. Update all in-tree users for the new interface. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
generated by cgit v1.2.2 (git 2.25.0) at 2025-02-05 09:30:53 -0500