aboutsummaryrefslogtreecommitdiffstats
path: root/arch
Commit message (Collapse)AuthorAge
* OMAP: PM counter infrastructure.Peter 'p2' De Schrijver2009-09-02
| | | | | | | | | | | This patch provides the infrastructure to count how many times a powerdomain entered a given power state (on, inactive, retention, off). A number of functions are provided which will be called by the chip specific powerdomain and clockdomain code whenever a transition might have happened. Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP3: update OMAP3 Beagle defconfigPaul Walmsley2009-08-28
| | | | | | | | | | | | | | Update the OMAP3 Beagle defconfig to add EHCI, MMC, TWL4030 GPIO support. Beagle can again use MMC rootfs after this patch. Tested on BeagleBoard rev C2. Patch updated to enable PM and OTG options as suggested by Eric Witcher <ewitcher@mindspring.com>. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jason Kridner <jkridner@beagleboard.org> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP3: beagle: add missing twl4030 usb platform_dataFelipe Balbi2009-08-28
| | | | | | | without it twl4030_usb driver will not probe. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP3: Zoom2: Update board defconfigVikram Pandita2009-08-28
| | | | | | | | | | | Update defconfig for Zoom2 to include TWL4030 core TWL4030 drivers (bci, gpio, keypad, usb, mmc) Also sync the defconfig after issuing a menuconfig Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP3: Zoom2: Add TWL4030 supportVikram Pandita2009-08-28
| | | | | | | | | | | | | Add TWL4030 CORE and TWL4030 drivers to Zoom2 board file TWL drivers enabled are: bci madc usb keypad mmc Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP3: MMC: Add mux for pinsVikram Pandita2009-08-28
| | | | | | | | | | For OMAP3 add MMC1 MMC2 pin mux MMC3 mux is not added as there are multiple configurations possible, so the muxing is left to be done in board file. Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Chikkature Rajashekar <madhu.cr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP3: rx51_defconfig: add twl4030 to rx51 default configurationTimo Kokkonen2009-08-28
| | | | | | | twl4030 watchdog will be compiled as a module by default. Signed-off-by: Atal Shargorodsky <ext-atal.shargorodsky@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP3: 3430SDP: Fix defconfigSergio Aguirre2009-08-28
| | | | | | | | | | | | | | | This patch makes the SDP boot again with the defconfig. Changes done: - Removes other selected boards. - Sets the Low Level debug output for UART1. - Disables some paripherals from other boards. Tested on a SDP3430-VE5.1.0 (OMAP3430 ES3.1) Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP2/3: Pass irqflags to 8250 driverVikram Pandita2009-08-28
| | | | | | | | | | | Pass irqflags to 8250 driver with platform_data. At least Zoom2 has IRQF_TRIGGER_RISING requirement for the 8250 GPIO irq. This patch is dependent on 8250 driver changes getting accepted upstream: http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commit;h=7053133124d5cdf207c1168c7a0c582a18e12ea7 Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP: iommu: add initial debugfs supportHiroshi DOYU2009-08-28
| | | | | | | | | | | | | | | | | | | This enables to peek the following data. $ /debug/iommu/isp# ls mem nr_tlb_entries regs mmap pagetable tlb $ /debug/iommu/isp# head pagetable L: da: pa: ----------------------------------------- 2: 00001000 8ae4a002 2: 00002000 8e7bb002 2: 00003000 8ae49002 2: 00004000 8ae65002 ..... Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP: iommu: fix wrong argument in flush_cache_vmap()Hiroshi DOYU2009-08-28
| | | | | | | | | The second argument should be the end address, not the length. Actually there will not be any effect on the behavior of this driver since flush_cache_vmap() calls flush_cache_all() in the end. Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP2: n8x0: add n8x0_defconfigKalle Valo2009-08-28
| | | | | | | Add defconfig file for OMAP2 N800 and N810 devices. Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP2: add board file for Nokia N800 and N810Kalle Valo2009-08-28
| | | | | | | | | | Add board file for Nokia N800 and N810 devices. Currently only serial ports, onenand and spi are configured, more to come later. Tested on Nokia N800. Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP2: compile usb-tusb6010.cKalle Valo2009-08-28
| | | | | | | | For some reason usb-tusb6010.c was't compiled, add it to Makefile and Kconfig. This is prepraration for upcoming n8x0 support. Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP1: AMS_DELTA: add modem supportJanusz Krzysztofik2009-08-28
| | | | | | | | | | | | | | This patch adds support for modem device found on Amstrad E3 (Delta) board. Based on earlier patch by Jonathan McDowell, available at http://the.earth.li/pub/e3/2.6.19/ams-delta-modem.patch. Modified after Ladislav Michl's arch/arm/mach-omap1/board-voiceblue.c. This patch is dependent on 8250 driver changes getting accepted upstream: http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commit;h=7053133124d5cdf207c1168c7a0c582a18e12ea7 Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP: GPIO: Avoid generating extra IRQsEero Nurkkala2009-08-28
| | | | | | | | | | | It is possible for GPIO IRQ lines configured with falling edge triggering only to get IRQs at the rising edge upon the exit of offmode. And vice versa. Prevent such IRQs to arrive by generating the IRQ obeying the detection scheme. Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP: Remove omap boot parsing codeRoger Quadros2009-08-28
| | | | | | | | | Remove left over code for parsing omap boot tags. This is no longer used. see commit fc0ef1bfa1353e048e055374a09c75320d22231b Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idleKalle Valo2009-08-28
| | | | | | | | | | | | | | | | OMAP tags are deprecrated so drop them. Drop UART config data which decides which UARTs to enable during boot. This is no longer necessary since serial core code disables clocks after inactivity. Background: with new UART idle code, all on-chip UARTs are idled using a configurable inactivity timer (default 5 seconds.) After the inactivity timer, UART clocks are disabled automatically. Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP: remove OMAP_TAG_SERIAL_CONSOLEKalle Valo2009-08-28
| | | | | | | | Omap tags are deprecated and remove OMAP_TAG_SERIAL_CONSOLE. Console must be enabled with the console boot parameter instead. Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP: Remove ifdefs for io.hTony Lindgren2009-08-28
| | | | | | Remove ifdefs for io.h Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP: Rename OMAP_MPUIO_BASE to OMAP1_MPUIO_BASETony Lindgren2009-08-28
| | | | | | Rename OMAP_MPUIO_BASE to OMAP1_MPUIO_BASE Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS insteadTony Lindgren2009-08-28
| | | | | | | | | | | Search and replace OMAP_IO_ADDRESS with OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS, and convert omap_read/write into a functions instead of a macros. Also rename OMAP_MPUIO_VBASE to OMAP1_MPUIO_VBASE. In the long run, most code should use ioremap + __raw_read/write instead. Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'merge' of ↵Linus Torvalds2009-08-26
|\ | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/ps3: Update ps3_defconfig powerpc/ps3: Add missing check for PS3 to rtc-ps3 platform device registration
| * powerpc/ps3: Update ps3_defconfigGeoff Levand2009-08-26
| | | | | | | | | | | | | | | | | | | | | | Update ps3_defconfig. o Refresh for 2.6.31. o Remove MTD support. o Add more HID drivers. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * powerpc/ps3: Add missing check for PS3 to rtc-ps3 platform device registrationGeert Uytterhoeven2009-08-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | On non-PS3, we get: | kernel BUG at drivers/rtc/rtc-ps3.c:36! because the rtc-ps3 platform device is registered unconditionally in a kernel with builtin support for PS3. Reported-by: Sachin Sant <sachinp@in.ibm.com> Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* | m68k,m68knommu: Wire up rt_tgsigqueueinfo and perf_counter_openGeert Uytterhoeven2009-08-26
| | | | | | | | | | Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@uclinux.org>
* | m68k: Fix redefinition of pgprot_noncachedAlexey Dobriyan2009-08-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arch/m68k/include/asm/pgtable_mm.h:148:1: warning: "pgprot_noncached" redefined In file included from arch/m68k/include/asm/pgtable_mm.h:138, from arch/m68k/include/asm/pgtable.h:4, from include/linux/mm.h:40, from include/linux/pagemap.h:7, from include/linux/blkdev.h:12, from arch/m68k/emu/nfblock.c:17: include/asm-generic/pgtable.h:133:1: warning: this is the location of the previous definition pgprot_noncached() should be defined _before_ including asm-generic/pgtable.h Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
* | arch/m68k/include/asm/motorola_pgalloc.h: fix kunmap argAndrew Morton2009-08-26
| | | | | | | | | | | | | | | | | | | | arch/m68k/include/asm/motorola_pgalloc.h: In function 'pte_alloc_one': arch/m68k/include/asm/motorola_pgalloc.h:44: warning: passing argument 1 of 'kunmap' from incompatible pointer type Also, remove unneeded test for kmap() failure. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
* | m68k: cnt reaches -1, not 0Roel Kluin2009-08-26
|/ | | | | | | | | With the postfix decrement cnt reaches -1 rather than 0. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds2009-08-26
|\ | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Validate linear D-TLB misses. sparc64: Update defconfig. sparc32: Update defconfig. sparc32: Kill trap table freeing code. sparc: sys32.S incorrect compat-layer splice() system call sparc: Use page_fault_out_of_memory() for VM_FAULT_OOM. sparc64: Sign extend length arg to truncate syscalls when compat. sparc: Fix cleanup crash in bbc_envctrl_cleanup()
| * sparc64: Validate linear D-TLB misses.David S. Miller2009-08-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When page alloc debugging is not enabled, we essentially accept any virtual address for linear kernel TLB misses. But with kgdb, kernel address probing, and other facilities we can try to access arbitrary crap. So, make sure the address we miss on will translate to physical memory that actually exists. In order to make this work we have to embed the valid address bitmap into the kernel image. And in order to make that less expensive we make an adjustment, in that the max physical memory address is decreased to "1 << 41", even on the chips that support a 42-bit physical address space. We can do this because bit 41 indicates "I/O space" and thus covers non-memory ranges. The result of this is that: 1) kpte_linear_bitmap shrinks from 2K to 1K in size 2) we need 64K more for the valid address bitmap We can't let the valid address bitmap be dynamically allocated once we start using it to validate TLB misses, otherwise we have crazy issues to deal with wrt. recursive TLB misses and such. If we're in a TLB miss it could be the deepest trap level that's legal inside of the cpu. So if we TLB miss referencing the bitmap, the cpu will be out of trap levels and enter RED state. To guard against out-of-range accesses to the bitmap, we have to check to make sure no bits in the physical address above bit 40 are set. We could export and use last_valid_pfn for this check, but that's just an unnecessary extra memory reference. On the plus side of all this, since we load all of these translations into the special 4MB mapping TSB, and we check the TSB first for TLB misses, there should be absolutely no real cost for these new checks in the TLB miss path. Reported-by: heyongli@gmail.com Signed-off-by: David S. Miller <davem@davemloft.net>
| * sparc64: Update defconfig.David S. Miller2009-08-19
| | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * sparc32: Update defconfig.David S. Miller2009-08-19
| | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * sparc32: Kill trap table freeing code.David S. Miller2009-08-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Normally, srmmu uses different trap table register values to allow determination of the cpu we're on. All of the trap tables have identical content, they just sit at different offsets from the first trap table, and the offset shifted down and masked out determines the cpu we are on. The code tries to free them up when they aren't actually used (don't have all 4 cpus, we're on sun4d, etc.) but that causes problems. For one thing it triggers false positives in the DMA debugging code. And fixing that up while preserving this relative offset thing isn't trivial. So just kill the freeing code, it costs us at most 3 pages, big deal... Signed-off-by: David S. Miller <davem@davemloft.net>
| * sparc: sys32.S incorrect compat-layer splice() system callMathieu Desnoyers2009-08-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I think arch/sparc/kernel/sys32.S has an incorrect splice definition: SIGN2(sys32_splice, sys_splice, %o0, %o1) The splice() prototype looks like : long splice(int fd_in, loff_t *off_in, int fd_out, loff_t *off_out, size_t len, unsigned int flags); So I think we should have : SIGN2(sys32_splice, sys_splice, %o0, %o2) Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sparc: Use page_fault_out_of_memory() for VM_FAULT_OOM.David S. Miller2009-08-02
| | | | | | | | | | | | As noted by Nick Piggin. Signed-off-by: David S. Miller <davem@davemloft.net>
| * sparc64: Sign extend length arg to truncate syscalls when compat.David S. Miller2009-07-27
| | | | | | | | | | | | | | | | | | The first thing sys_truncate() and sys_ftruncate() do is sign extend the unsigned length arg to a signed type. Thanks to Benjamin Herrenschmidt for the tip. Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'timers-fixes-for-linus' of ↵Linus Torvalds2009-08-25
|\ \ | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: clockevent: Prevent dead lock on clockevents_lock timers: Drop write permission on /proc/timer_list
| * | clockevent: Prevent dead lock on clockevents_lockSuresh Siddha2009-08-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently clockevents_notify() is called with interrupts enabled at some places and interrupts disabled at some other places. This results in a deadlock in this scenario. cpu A holds clockevents_lock in clockevents_notify() with irqs enabled cpu B waits for clockevents_lock in clockevents_notify() with irqs disabled cpu C doing set_mtrr() which will try to rendezvous of all the cpus. This will result in C and A come to the rendezvous point and waiting for B. B is stuck forever waiting for the spinlock and thus not reaching the rendezvous point. Fix the clockevents code so that clockevents_lock is taken with interrupts disabled and thus avoid the above deadlock. Also call lapic_timer_propagate_broadcast() on the destination cpu so that we avoid calling smp_call_function() in the clockevents notifier chain. This issue left us wondering if we need to change the MTRR rendezvous logic to use stop machine logic (instead of smp_call_function) or add a check in spinlock debug code to see if there are other spinlocks which gets taken under both interrupts enabled/disabled conditions. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: "Pallipadi Venkatesh" <venkatesh.pallipadi@intel.com> Cc: "Brown Len" <len.brown@intel.com> LKML-Reference: <1250544899.2709.210.camel@sbs-t61.sc.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | | Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds2009-08-25
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Fix build with older binutils and consolidate linker script x86: Fix an incorrect argument of reserve_bootmem() x86: add vmlinux.lds to targets in arch/x86/boot/compressed/Makefile xen: rearrange things to fix stackprotector x86: make sure load_percpu_segment has no stackprotector i386: Fix section mismatches for init code with !HOTPLUG_CPU x86, pat: Allow ISA memory range uncacheable mapping requests
| * | | x86: Fix build with older binutils and consolidate linker scriptJan Beulich2009-08-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | binutils prior to 2.17 can't deal with the currently possible situation of a new segment following the per-CPU segment, but that new segment being empty - objcopy misplaces the .bss (and perhaps also the .brk) sections outside of any segment. However, the current ordering of sections really just appears to be the effect of cumulative unrelated changes; re-ordering things allows to easily guarantee that the segment following the per-CPU one is non-empty, and at once eliminates the need for the bogus data.init2 segment. Once touching this code, also use the various data section helper macros from include/asm-generic/vmlinux.lds.h. -v2: fix !SMP builds. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: <sam@ravnborg.org> LKML-Reference: <4A94085D02000078000119A5@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | | x86: Fix an incorrect argument of reserve_bootmem()Amerigo Wang2009-08-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This line looks suspicious, because if this is true, then the 'flags' parameter of function reserve_bootmem_generic() will be unused when !CONFIG_NUMA. I don't think this is what we want. Signed-off-by: WANG Cong <amwang@redhat.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: akpm@linux-foundation.org LKML-Reference: <20090821083709.5098.52505.sendpatchset@localhost.localdomain> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | | x86: add vmlinux.lds to targets in arch/x86/boot/compressed/MakefileJan Beulich2009-08-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The absence of vmlinux.lds here keeps .vmlinux.lds.cmd from being included, which in turn leads to it and all its dependents always getting rebuilt independent of whether they are already up-to-date. Signed-off-by: Jan Beulich <jbeulich@novell.com> LKML-Reference: <4A8D84670200007800010D31@vpn.id2.novell.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
| * | | Merge branch 'bugfix' of ↵Ingo Molnar2009-08-20
| |\ \ \ | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen into x86/urgent
| | * | | xen: rearrange things to fix stackprotectorJeremy Fitzhardinge2009-08-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure the stack-protector segment registers are properly set up before calling any functions which may have stack-protection compiled into them. [ Impact: prevent Xen early-boot crash when stack-protector is enabled ] Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
| | * | | x86: make sure load_percpu_segment has no stackprotectorJeremy Fitzhardinge2009-08-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | load_percpu_segment() is used to set up the per-cpu segment registers, which are also used for -fstack-protector. Make sure that the load_percpu_segment() function doesn't have stackprotector enabled. [ Impact: allow percpu setup before calling stack-protected functions ] Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
| * | | | i386: Fix section mismatches for init code with !HOTPLUG_CPUJan Beulich2009-08-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 0e83815be719d3391bf5ea24b7fe696c07dbd417 changed the section the initial_code variable gets allocated in, in an attempt to address a section conflict warning. This, however created a new section conflict when building without HOTPLUG_CPU. The apparently only (reasonable) way to address this is to always use __REFDATA. Once at it, also fix a second section mismatch when not using HOTPLUG_CPU. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <4A8AE7CD020000780001054B@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | | | x86, pat: Allow ISA memory range uncacheable mapping requestsSuresh Siddha2009-08-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Max Vozeler reported: > Bug 13877 - bogl-term broken with CONFIG_X86_PAT=y, works with =n > > strace of bogl-term: > 814 mmap2(NULL, 65536, PROT_READ|PROT_WRITE, MAP_SHARED, 4, 0) > = -1 EAGAIN (Resource temporarily unavailable) > 814 write(2, "bogl: mmaping /dev/fb0: Resource temporarily unavailable\n", > 57) = 57 PAT code maps the ISA memory range as WB in the PAT attribute, so that fixed range MTRR registers define the actual memory type (UC/WC/WT etc). But the upper level is_new_memtype_allowed() API checks are failing, as the request here is for UC and the return tracked type is WB (Tracked type is WB as MTRR type for this legacy range potentially will be different for each 4k page). Fix is_new_memtype_allowed() by always succeeding the ISA address range checks, as the null PAT (WB) and def MTRR fixed range register settings satisfy the memory type needs of the applications that map the ISA address range. Reported-and-Tested-by: Max Vozeler <xam@debian.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
* | | | | Merge branch 'fixes' of git://git.marvell.com/orionLinus Torvalds2009-08-24
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'fixes' of git://git.marvell.com/orion: [ARM] Orion NAND: Make asm volatile avoid GCC pushing ldrd out of the loop [ARM] Kirkwood: enable eSATA on QNAP TS-219P [ARM] Kirkwood: __init requires linux/init.h
| * | | | | [ARM] Kirkwood: enable eSATA on QNAP TS-219PJohn Holland2009-08-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Initialize PCI/PCIe on the QNAP TS-119, TS-219 and TS-219P hardware allowing the use of the discrete eSATA controller connected to the PCIe bus in the TS-219P. Signed-off-by: John Holland <john.holland@cellent-fs.de> Tested-by: Thomas Reitmayr <treitmayr@devbase.at> Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
generated by cgit v1.2.2 (git 2.25.0) at 2025-02-04 20:08:35 -0500