aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* [ARM] Allow r2 to be passed through the decompressor to the kernelRussell King2006-01-12
| | | | | | | | | | | | | | | | This is part of a patch from Marc Singer to allow r2 to be passed to the kernel. Marc's original comments follow: This revised R2 (atags pointer) patch incorporates comments from Nico Pitre and Ben Dooks. It modifies the head.S files such that the R2 value set by the bootloader is conveyed to the kernel startup code. The kernel head.S heuristically validates the pointer. It will set R2 to zero if it believes the pointer is invalid. Presently, it requires that the ATAGS list reside in the first 16KiB of physical RAM. Relaxing this contraint may be both desirable as well as tricky. Signed-off-by: Marc Singer <elf@buici.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3256/1: Make the function-returning ldm's use sp as the base registerCatalin Marinas2006-01-12
| | | | | | | | | | | | | | | | | | Patch from Catalin Marinas If the low interrupt latency mode is enabled for the CPU (from ARMv6 onwards), the ldm/stm instructions are no longer atomic. An ldm instruction restoring the sp and pc registers can be interrupted immediately after sp was updated but before the pc. If this happens, the CPU restores the base register to the value before the ldm instruction but if the base register is not sp, the interrupt routine will corrupt the stack and the restarted ldm instruction will load garbage. Note that future ARM cores might always run in the low interrupt latency mode. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3237/1: PXA I2C driver updatesRichard Purdie2006-01-12
| | | | | | | | | | | | | | | | Patch from Richard Purdie This patch adds a check to see if the pxa i2c interface is enabled before allowing it to be used and resets it if found to be disabled. This automatically restores the interface if the device has been suspended and resumed without causing any suspend/resume call ordering issues. The patch also fixes a build warning and adds an appropriate module licence (the module is gpl according to the header). Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3234/1: Update cpu_architecture() to deal with the new ID formatCatalin Marinas2006-01-12
| | | | | | | | | | Patch from Catalin Marinas Since ARM1176, the CPU ID format has changed and it will also be used for future ARM architectures. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3209/1: Configurable DMA-consistent memory regionKevin Hilman2006-01-12
| | | | | | | | | Patch from Kevin Hilman This patch increase available DMA-consistent memory allocated by dma_coherent_alloc(). The default remains at 2M (defined in asm/memory.h) and each platform has the ability to override in asm/arch-foo/memory.h. Signed-off-by: Kevin Hilman <kevin@hilman.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3252/1: help gcc do the best with ___arch__swab32Nicolas Pitre2006-01-10
| | | | | | | | | | | | | Patch from Nicolas Pitre Depending on your gcc version, the current C-only implementation would produce suboptimal code, ranging from a bad register selection forcing an additional mov instruction to a failure to merge the eor and the ror in a single instruction. With a little help gcc always produces the best code. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3250/1: Change pxa2xx PCMCIA drivers to use platform_device_allocRichard Purdie2006-01-10
| | | | | | | | | | Patch from Richard Purdie Change mainstone and sharpsl pxa2xx pcmcia drivers to use platform_device_alloc which fixes a memory leak. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3247/1: AT91RM9200 support for 2.6 (Cogent CSB337 & CSB637 boards) (PatchAndrew Victor2006-01-10
| | | | | | | | | | | | | | #3244) Patch from Andrew Victor This patch adds support to the 2.6 kernel series for the Atmel AT91RM9200 processor. This patch is the support for the Cogent CSB337 and CSB637 boards. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3243/2: AT91RM9200 support for 2.6 (Atmel DK & EK boards)Andrew Victor2006-01-10
| | | | | | | | | | | | Patch from Andrew Victor This patch adds support to the 2.6 kernel series for the Atmel AT91RM9200 processor. This patch is the support for Atmel's DK and EK boards. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3242/2: AT91RM9200 support for 2.6 (Serial)Andrew Victor2006-01-10
| | | | | | | | | | | | | | Patch from Andrew Victor This patch adds support to the 2.6 kernel series for the Atmel AT91RM9200 processor. This patch is the Serial driver. This version uses the newly re-written GPL'ed hardware headers. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds2006-01-09
|\
| * [PATCH] drivers/*rest*: Replace pci_module_init() with pci_register_driver()Richard Knutsson2006-01-09
| | | | | | | | | | | | | | Replace obsolete pci_module_init() with pci_register_driver(). Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] drivers/sound/oss: Replace pci_module_init() with pci_register_driver()Greg Kroah-Hartman2006-01-09
| | | | | | | | | | | | | | Replace obsolete pci_module_init() with pci_register_driver(). Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
| * [PATCH] drivers/block: Replace pci_module_init() with pci_register_driver()Richard Knutsson2006-01-09
| | | | | | | | | | | | | | Replace obsolete pci_module_init() with pci_register_driver(). Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] arch: Replace pci_module_init() with pci_register_driver()Richard Knutsson2006-01-09
| | | | | | | | | | | | | | Replace obsolete pci_module_init() with pci_register_driver(). Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] PCI Error Recovery: documentationlinas@austin.ibm.com2006-01-09
| | | | | | | | | | | | | | | | | | | | | | Various PCI bus errors can be signaled by newer PCI controllers. Recovering from those errors requires an infrastructure to notify affected device drivers of the error, and a way of walking through a reset sequence. This patch adds documentation describing the current error recovery proposal. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] PCI Error Recovery: header file patchlinas2006-01-09
| | | | | | | | | | | | | | | | | | | | | | | | Various PCI bus errors can be signaled by newer PCI controllers. Recovering from those errors requires an infrastructure to notify affected device drivers of the error, and a way of walking through a reset sequence. This patch adds a set of callbacks to be used by error recovery routines to notify device drivers of the various stages of recovery. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] PCI: update Toshiba ohci quirk DMI tableJesse Barnes2006-01-09
| | | | | | | | | | | | | | | | | | | | | | | | | | I upgraded my Toshiba Satellite BIOS recently to see if it would fix an ACPI related problem I have (http://bugzilla.kernel.org/show_bug.cgi?id=5727). Unfortunately, it didn't, and moreover, Toshiba chose to change the system version in the DMI table with the update, causing the OHCI1394 related quirk to break. This patch updates the DMI table for the quirk to include Toshiba's new version name for this machine; I've tested it and it seems to work fine. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] PCI: drivers/pci: some cleanupsAdrian Bunk2006-01-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch contains the following cleanups: - hotplug/pciehp_core.c: make the needlessly global hpdriver_context static - #if 0 the following unused functions: - pci.c: pci_bus_max_busnr() - pci.c: pci_max_busnr() - proc.c: pci_proc_attach_bus() - remove.c: pci_remove_device_safe Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] acpiphp: only size new busKristen Accardi2006-01-09
| | | | | | | | | | | | | | Only size the bus that has been added. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] PCI Hotplug: fix up the sysfs file in the compaq pci hotplug driverGreg Kroah-Hartman2006-01-09
| | | | | | | | | | | | | | | | | | | | | | | | The Compaq PCI Hotplug driver was creating 2 sysfs files that contained nothing but debug information, and had way more than "one value" in them. This patch converts the code to use debugfs for these files instead. Compile tested only. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] PCI: Reduce nr of ptr derefs in drivers/pci/hotplug/pciehp_core.cJesper Juhl2006-01-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Here's a small patch to reduce the nr. of pointer dereferences in drivers/pci/hotplug/pciehp_core.c Benefits: - micro speed optimization due to fewer pointer derefs - generated code is slightly smaller - small line length cleanup - better readability Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] PCI: Reduce nr of ptr derefs in drivers/pci/hotplug/pciehprm_acpi.cJesper Juhl2006-01-09
| | | | | | | | | | | | | | | | | | | | | | | | | | Here's a small patch to reduce the nr. of pointer dereferences in drivers/pci/hotplug/pciehprm_acpi.c Benefits: - micro speed optimization due to fewer pointer derefs - generated code is slightly smaller - better readability Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] PCI: Reduce nr of ptr derefs in drivers/pci/hotplug/rpaphp_pci.cJesper Juhl2006-01-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Here's a small patch to reduce the nr. of pointer dereferences in drivers/pci/hotplug/rpaphp_pci.c Benefits: - micro speed optimization due to fewer pointer derefs - generated code should be slightly smaller - better readability note: due to lack of both hardware and cross-compile tools this patch is, unfortunately, completely untested. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] PCI: Reduce nr of ptr derefs in drivers/pci/hotplug/cpqphp_core.cJesper Juhl2006-01-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Here's a small patch to reduce the nr of pointer dereferences in drivers/pci/hotplug/cpqphp_core.c Benefits of this patch: - micro speed optimization due to fewer pointer derefs - generated code is slightly smaller - tiny line length and whitespace cleanup - better readability Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] PCI: document sysfs rom file interfaceJesse Barnes2006-01-09
| | | | | | | | | | | | | | | | | | | | | | | | idr gently pointed out today that not only is the sysfs rom file interface somewhat unintuitive (despite my efforts and initial implementation), but it's also undocumented! This patch to Documentation/filesystems/sysfs-pci.txt corrects the latter problem; the former is a userland ABI now though, so we're stuck with it for awhile at least. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] PCI: Export pci_cfg_space_sizeBenjamin Herrenschmidt2006-01-09
| | | | | | | | | | | | | | | | | | | | The powerpc PCI code sets up the PCI tree without doing config space accesses in most cases, from the firmware tree. However, it still wants to call pci_cfg_space_size() under some conditions, thus it needs to be made non-static (though I don't see a point to export it to modules). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] PCI: use bus numbers sparsely, if necessaryDominik Brodowski2006-01-09
| | | | | | | | | | | | | | | | | | | | | | | | | | Add a warning if a child bus may be inaccessible because the parent bridge has wrong secondary or subordinate bus numbers. Note that this may or may not happen on "transparent" bridges, as can be seen in bug #5557. Also, if we do not fix up the assignment of bus numbers, try to make use of the bus number space available. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] pciehp: allow bridged card hotplugRajesh Shah2006-01-09
| | | | | | | | | | | | | | | | This patch fixes bugs in the pciehp driver that prevent hot-add of a card with PCI bridges on it. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] pciehp: handle sticky power-fault statusThomas Schaefer2006-01-09
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch disables power fault, MRL sensor and presence detection interrupts when a PCIe slot is powered-off and enables those interrupts when it is powered-on again. This is necessary to prevent the associated events from causing an endless cycle of interrupts due to the power-fault bit, which stays set till power is restored to the slot. Signed-off-by: Thomas Schaefer <thomas.schaefer@kontron.com> Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] PCI Quirk: 1K I/O space granularity on Intel P64H2Daniel Yeisley2006-01-09
| | | | | | | | | | | | | | | | | | | | | | | | | | I've implemented a quirk to take advantage of the 1KB I/O space granularity option on the Intel P64H2 PCI Bridge. I had to change probe.c because it sets the resource start and end to be aligned on 4k boundaries (after the quirk sets them to 1k boundaries). I've tested this patch on a Unisys ES7000-600 both with and without the 1KB option enabled. I also tested this on a 2 processor Dell box that doesn't have a P64H2 to make sure there were no negative affects there. Signed-off-by: Dan Yeisley <dan.yeisley@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] shpchp: Implement get_address callbackKenji Kaneshige2006-01-09
| | | | | | | | | | | | | | | | | | | | | | | | The following patch implements .get_address callback of hotplug_slot_ops for SHPCHP driver. With this patch, we can see bus address of hotplug slots as follows: $ cat address 0000:0b:01 Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] PCI Hotplug/powerpc: more removal of duplicated codelinas@austin.ibm.com2006-01-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The RPAPHP code contains two routines that appear to be gratuitous copies of very similar pci code. In particular, rpaphp_claim_resource ~~ pci_claim_resource (there is a minor, non-functional difference) rpadlpar_claim_one_bus == pcibios_claim_one_bus (the code is identical) This patch removes the rpaphp versions of the code. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Acked-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] PCI Hotplug/powerpc: remove duplicated codelinas@austin.ibm.com2006-01-09
| | | | | | | | | | | | | | | | | | The RPAPHP code contains a routine that duplicates some existing code. This patch removes the rpaphp version of the code. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Acked-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] PCI: irq.c: trivial printk and DBG updatesDaniel Marjamäki2006-01-09
| | | | | | | | | | | | | | Updated printk and DBG with appropriate KERN_*. Signed-off-by: Daniel Marjamäki <daniel.marjamaki@comhem.se> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] shpchp: fix improper wait for command completionKenji Kaneshige2006-01-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current SHPCHP driver uses msleep_interruptible() function to wait for a command completion event. But I think this would cause an unnecessary long wait until timeout, if command completion interrupt came before task state was changed to TASK_INTERRUPTIBLE. This patch fixes this issue. With this patch, command completion becomes faster as follows: o Without this patch # time echo 1 > power real 0m4.708s user 0m0.000s sys 0m0.524s o With this patch # time echo 1 > power real 0m2.221s user 0m0.000s sys 0m0.532s Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] shpchp: fix improper write to Command Completion Detect bitKenji Kaneshige2006-01-09
| | | | | | | | | | | | | | | | | | | | Current SHPCHP driver writes a '0' to the Command Completion Detect bit to clear the Command Complete Interrupt Pending. But according to the SHPC spec (See 4.7.3.1 System Interrupts), SHPCHP driver must write '1'. This patch fixes this bug. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] shpchp: fix improper mmio mappingKenji Kaneshige2006-01-09
| | | | | | | | | | | | | | | | Current SHPCHP driver seems not to map MMIO region properly. This patch fixes this bug. This patch also cleanup the code. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] shpchp: fix improper reference to Mode 1 ECC Capability" bitKenji Kaneshige2006-01-09
| | | | | | | | | | | | | | | | | | | | The hpc_get_mode1_ECC_cap() function of SHPCHP driver seems to refer the wrong bit for refering the "Mode 1 ECC Capability" bit. This bug seems not to cause any problem so far. But I think this should be fixed. This patch fixes this bug. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] shpchp: fix improper reference to Slot Avail RegsisterKenji Kaneshige2006-01-09
| | | | | | | | | | | | | | | | | | | | The hpc_get_max_bus_speed() function of the SHPCHP driver seems to refer wrong bits in the "Slot Avail Register I" and "Slot Avail Register II". This patch fixes this bug. And this also cleanup the code. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] shpchp: replace pci_find_slot() with pci_get_slot()Kenji Kaneshige2006-01-09
| | | | | | | | | | | | | | | | | | This patch replaces pci_find_slot() with pci_get_slot() in the SHPCHP driver. This enables SHPCHP driver to work on multiple PCI segment systems. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] PCI Hotplug: cpqphp_ctrl.c: remove dead codeAdrian Bunk2006-01-09
| | | | | | | | | | | | | | | | The Coverity checker spotted that we already did return -ENOMEM if (!p_mem_node). Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] PCI Hotplug: ibmphp_pci.c copy-n-paste fixJordan, William P2006-01-09
| | | | | | | | | | | | | | | | I noticed what appears to be a cut/paste error in drivers/pci/hotplug/ibmphp_pci.c: Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] PCIE: make bus_id for PCI Express devices uniqueSergey Vlasov2006-01-09
| | | | | | | | | | | | | | | | | | The bus_id string must be unique for all devices of that bus in the system, not just for devices with the same parent - otherwise multiple symlinks with identical names appear in /sys/bus/pci_express/devices. Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] PCI: arch/i386/pci/acpi.c: use for_each_pci_devHanna Linder2006-01-09
| | | | | | | | | | | | | | | | | | Signed-off-by: Hanna Linder <hannal@us.ibm.com> Signed-off-by: Maximilian Attems <janitor@sternwelten.at> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] PCI: arch: pci_find_device remove (frv/mb93090-mb00/pci-irq.c)Jiri Slaby2006-01-09
| | | | | | | | | | | | Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] PCI: pci_find_device remove (sparc64/kernel/ebus.c)Jiri Slaby2006-01-09
| | | | | | | | | | | | Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] PCI: pci_find_device remove (frv/mb93090-mb00/pci-frv.c)Jiri Slaby2006-01-09
| | | | | | | | | | | | Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] PCI: pci_find_device remove (ppc/platforms/85xx/mpc85xx_cds_common.c)Jiri Slaby2006-01-09
| | | | | | | | | | | | Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] PCI: pci_find_device remove (ppc/kernel/pci.c)Jiri Slaby2006-01-09
| | | | | | | | | | | | | | | | Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> arch/ppc/kernel/pci.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-)