aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
...
* mtd: mxc_nand: fix unbalanced enable for IRQEric Bénard2010-08-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * preset should be done before sending the reset command * without this, I get the following error on an i.MX35 : [ 0.900000] ------------[ cut here ]------------ [ 0.900000] WARNING: at kernel/irq/manage.c:290 __enable_irq+0x4c/0x88() [ 0.900000] Unbalanced enable for IRQ 33 [ 0.900000] Modules linked in: [ 0.900000] [<c002ffb8>] (unwind_backtrace+0x0/0xf0) from [<c02f7d0c>] (dump_stack+0x18/0x1c) [ 0.900000] [<c02f7d0c>] (dump_stack+0x18/0x1c) from [<c0049a44>] (warn_slowpath_common+0x54/0x6c) [ 0.900000] [<c0049a44>] (warn_slowpath_common+0x54/0x6c) from [<c0049b00>] (warn_slowpath_fmt+0x38/0x40) [ 0.900000] [<c0049b00>] (warn_slowpath_fmt+0x38/0x40) from [<c008f65c>] (__enable_irq+0x4c/0x88) [ 0.900000] [<c008f65c>] (__enable_irq+0x4c/0x88) from [<c008fca0>] (enable_irq+0x54/0x98) [ 0.900000] [<c008fca0>] (enable_irq+0x54/0x98) from [<c021e618>] (wait_op_done+0x40/0x134) [ 0.900000] [<c021e618>] (wait_op_done+0x40/0x134) from [<c021e808>] (send_cmd+0x30/0x38) [ 0.900000] [<c021e808>] (send_cmd+0x30/0x38) from [<c021eb8c>] (mxc_nand_command+0x26c/0x328) [ 0.900000] [<c021eb8c>] (mxc_nand_command+0x26c/0x328) from [<c021aa60>] (nand_scan_ident+0x188/0x6c0) [ 0.900000] [<c021aa60>] (nand_scan_ident+0x188/0x6c0) from [<c001a9cc>] (mxcnd_probe+0x2b8/0x3d0) [ 0.900000] [<c001a9cc>] (mxcnd_probe+0x2b8/0x3d0) from [<c01f9e88>] (platform_drv_probe+0x20/0x24) [ 0.900000] [<c01f9e88>] (platform_drv_probe+0x20/0x24) from [<c01f8c38>] (driver_probe_device+0xb0/0x164) [ 0.900000] [<c01f8c38>] (driver_probe_device+0xb0/0x164) from [<c01f8d54>] (__driver_attach+0x68/0x8c) [ 0.900000] [<c01f8d54>] (__driver_attach+0x68/0x8c) from [<c01f8348>] (bus_for_each_dev+0x50/0x84) [ 0.900000] [<c01f8348>] (bus_for_each_dev+0x50/0x84) from [<c01f8a9c>] (driver_attach+0x20/0x28) [ 0.900000] [<c01f8a9c>] (driver_attach+0x20/0x28) from [<c01f7c00>] (bus_add_driver+0x144/0x2dc) [ 0.900000] [<c01f7c00>] (bus_add_driver+0x144/0x2dc) from [<c01f906c>] (driver_register+0xb0/0x13c) [ 0.900000] [<c01f906c>] (driver_register+0xb0/0x13c) from [<c01fa13c>] (platform_driver_register+0x4c/0x60) [ 0.900000] [<c01fa13c>] (platform_driver_register+0x4c/0x60) from [<c01fa170>] (platform_driver_probe+0x20/0xa0) [ 0.900000] [<c01fa170>] (platform_driver_probe+0x20/0xa0) from [<c001a708>] (mxc_nd_init+0x18/0x24) [ 0.900000] [<c001a708>] (mxc_nd_init+0x18/0x24) from [<c002938c>] (do_one_initcall+0x64/0x1bc) [ 0.900000] [<c002938c>] (do_one_initcall+0x64/0x1bc) from [<c00084c4>] (kernel_init+0xe8/0x1ac) [ 0.900000] [<c00084c4>] (kernel_init+0xe8/0x1ac) from [<c002aee8>] (kernel_thread_exit+0x0/0x8) [ 0.900000] ---[ end trace 8bf72ac6ba089a19 ]--- [ 1.140000] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bit) Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: tests: return -1 if verify failedRoel Kluin2010-08-02
| | | | | | Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: sm_common: remove casts from voidKulikov Vasiliy2010-08-02
| | | | | | | | Remove unnesessary casts from void*. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: r852: remove casts from voidKulikov Vasiliy2010-08-02
| | | | | | | | Remove unnesessary casts from void*. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nandsim: remove casts from voidKulikov Vasiliy2010-08-02
| | | | | | | | Remove unnesessary casts from void*. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: dataflash: remove casts from voidKulikov Vasiliy2010-08-02
| | | | | | | | Remove unnesessary casts from void*. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: r852: remove casts from voidKulikov Vasiliy2010-08-02
| | | | | | | | Remove unnesessary casts from void*. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: cfi_probe: print manufacturer and id of probed chipGuillaume LECERF2010-08-02
| | | | | | Signed-off-by: Guillaume LECERF <glecerf@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: edit macro flag for BBT scan of last page in blockBrian Norris2010-08-02
| | | | | | | | | | | | NAND_BB_LAST_PAGE used to be in nand.h, but it pertained to bad block management and so belongs next to NAND_BBT_SCAN2NDPAGE in bbm.h. Also, its previous flag value (0x00000400) conflicted with NAND_BBT_SCANALLPAGES so I changed its value to 0x00008000. All uses of the name were modified to provide consistency with other "NAND_BBT_*" flags. Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: mtdconcat: fix bug with uninitialized lock and unlock functionsMartin Krause2010-08-02
| | | | | | | | | | | Test if a lock or unlock function is present (pointer not NULL) before calling it, to prevent a kernel dump. Artem: removed extra blank lines Signed-off-by: Martin Krause <martin.krause@tqs.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand_ids: add two entries for NAND chipsBrian Norris2010-08-02
| | | | | | | | | | | | | Included the basic size info for NAND chips with ID of 0xAD or 0xD7. The first can be found in Hynix HY27SF161G2M, while the second can be found in Micron MT29F64G08 and the Samsung K9LBG08U0D (among others). Also, some 64 Gbit (or larger) chips identify as 0xD7 because they contain multiple smaller 32 Gbit chips. I assume it's safe to classify these under the 32 Gbit listing. Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: mxc_nand: remove unused variableUwe Kleine-König2010-08-02
| | | | | | | | | | | | | This fixes: drivers/mtd/nand/mxc_nand.c: In function 'mxcnd_resume': drivers/mtd/nand/mxc_nand.c:901: warning: unused variable 'host' Removing this variable was missed in 9c14b153e6af. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: physmap: use resource_size()H Hartley Sweeten2010-08-02
| | | | | | Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: add an ioctl to query the lock status of a flash sectorRichard Cochran2010-08-02
| | | | | | | | | | This patchs adds a way for user space programs to find out whether a flash sector is locked. An optional driver method in the mtd_info struct provides the information. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: denali: add Kconfig dependencyKarl Beldan2010-08-02
| | | | | | Signed-off-by: Karl Beldan <karl.beldan@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: m25p80: Add support for Macronix 25L8005Martin Michlmayr2010-08-02
| | | | | | | | Add support for Macronix 25L8005. Tested on a HP t5325 Thin Client. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: return success on blktrans_ioctlDan Carpenter2010-08-02
| | | | | | | | | There was a break missing so we returned -ENOTTY on success instead of zero. This was introduced by 048d8719956: "mtd: blktrans: Hotplug fixes" Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: remove redundant dependency checks in Kconfig filesKyle Spaans2010-08-02
| | | | | | | | | Look for dependency checks for "FOO" when inside of an "if FOO" block and remove them. Signed-off-by: Kyle Spaans <kspaans@uwaterloo.ca> Reviewed-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: mxc_nand: fix OOB accesses on i.MX27Sascha Hauer2010-08-02
| | | | | | | | | | | | | The OOB handling in the mxc_nand driver is broken for v1 type controllers (i.MX27/31) with 512 byte page size. This perhaps did not show up because ubi does not use OOB. Update the driver to always read/write a whole page even if only OOB is requested. With this patch the driver passes the mtd_oobtest on i.MX27 with 512 byte page size. Also tested with 2048 byte page size and on i.MX35 (v2 type controller) Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: sst25l: check for null consistentlyDan Carpenter2010-08-02
| | | | | | | | | | The rest of the function assumes that "data" can be null. I don't know the code well enough to say whether it can actually be null, but there is no harm in checking here. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* drivers/mtd/maps: introduce missing kfreeJulia Lawall2010-06-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Error handling code following a kmalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* of/mtd: nand: fix build breakage in driversAnatolij Gustschin2010-06-03
| | | | | | | | Fixes build errors in drivers caused by the OF device_node pointer being moved into struct device Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* jffs2: Fix NFS race by using insert_inode_locked()David Woodhouse2010-06-03
| | | | | | | | | New inodes need to be locked as we're creating them, so they don't get used by other things (like NFSd) before they're ready. Pointed out by Al Viro. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* jffs2: Fix in-core inode leaks on error pathsDavid Woodhouse2010-06-03
| | | | | | Pointed out by Al Viro. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: Fix NAND submenuMaxim Levitsky2010-06-03
| | | | | | | | Move MTD_NAND_ECC and MTD_NAND_ECC_SMC above NAND memuconfig, to unbreak display in xconfig. This shouldn't change any dependencies. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd/r852: update card detect early.Maxim Levitsky2010-06-02
| | | | | | | | This turns out to be the reason for DMA timeouts on resume, if card was inserted while system was suspended Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd/r852: Fixes in case of DMA timeoutMaxim Levitsky2010-06-02
| | | | | | | | | | | | | | * Don't call complete on dma completion * do a INIT_COMPLETE before using it each time * Report DMA read error via ecc 'correct' I finally managed to make my system do suspend to ram propertly, and I see that if card was inserted during suspend (while system was off), I get dma timeouts on resume. Simple card reinsert solves the issue. This patch solves a crash that would happen otherwise Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd/r852: register IRQ as last stepMaxim Levitsky2010-06-02
| | | | | | | | Otherwise, if it fires right away, it might access uninitialized spinlock Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* drivers/mtd: Use memdup_userJulia Lawall2010-05-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use memdup_user when user data is immediately copied into the allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* docbook: make mtd nand module init staticH Hartley Sweeten2010-05-21
| | | | | | | | In the example the module_init function should be static. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* Merge git://git.infradead.org/mtd-2.6Linus Torvalds2010-05-21
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/mtd-2.6: (154 commits) mtd: cfi_cmdset_0002: use AMD standard command-set with Winbond flash chips mtd: cfi_cmdset_0002: Fix MODULE_ALIAS and linkage for new 0701 commandset ID mtd: mxc_nand: Remove duplicate NAND_CMD_RESET case value mtd: update gfp/slab.h includes jffs2: Stop triggering block erases from jffs2_write_super() jffs2: Rename jffs2_erase_pending_trigger() to jffs2_dirty_trigger() jffs2: Use jffs2_garbage_collect_trigger() to trigger pending erases jffs2: Require jffs2_garbage_collect_trigger() to be called with lock held jffs2: Wake GC thread when there are blocks to be erased jffs2: Erase pending blocks in GC pass, avoid invalid -EIO return jffs2: Add 'work_done' return value from jffs2_erase_pending_blocks() mtd: mtdchar: Do not corrupt backing device of device node inode mtd/maps/pcmciamtd: Fix printk format for ssize_t in debug messages drivers/mtd: Use kmemdup mtd: cfi_cmdset_0002: Fix argument order in bootloc warning mtd: nand: add Toshiba TC58NVG0 device ID pcmciamtd: add another ID pcmciamtd: coding style cleanups pcmciamtd: fixing obvious errors mtd: chips: add SST39WF160x NOR-flashes ... Trivial conflicts due to dev_node removal in drivers/mtd/maps/pcmciamtd.c
| * mtd: cfi_cmdset_0002: use AMD standard command-set with Winbond flash chipsGuillaume LECERF2010-05-20
| | | | | | | | | | | | | | | | | | | | | | | | Tested with W19L320SBT9C [1]. [1] http://www.datasheetarchive.com/pdf-datasheets/Datasheets-40/DSA-795343.pdf [dwmw2: Fix MODULE_ALIAS and linkage] Signed-off-by: Obinou <obconseil@gmail.com> Signed-off-by: Guillaume LECERF <glecerf@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: cfi_cmdset_0002: Fix MODULE_ALIAS and linkage for new 0701 commandset IDDavid Woodhouse2010-05-20
| | | | | | | | | | Signed-off-by: Guillaume LECERF <glecerf@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: mxc_nand: Remove duplicate NAND_CMD_RESET case valueDavid Woodhouse2010-05-20
| | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 66803762 ("mtd: mxc_nand: add RESET command support"). Support for NAND_CMD_RESET was added separately in commit d4840180 ("mtd: mxc_nand: set NFC registers after reset"), causing a build error: drivers/mtd/nand/mxc_nand.c: In function 'mxc_nand_command': drivers/mtd/nand/mxc_nand.c:689: error: duplicate case value drivers/mtd/nand/mxc_nand.c:606: error: previously used here Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: update gfp/slab.h includesTejun Heo2010-05-19
| | | | | | | | | | | | | | | | Implicit slab.h inclusion via percpu.h is about to go away. Make sure gfp.h or slab.h is included as necessary. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * jffs2: Stop triggering block erases from jffs2_write_super()Joakim Tjernlund2010-05-19
| | | | | | | | | | | | | | | | | | | | | | This is the culmination of this sequence of patches. By moving the block erasing from jffs2_write_super() into the GC code, we avoid huge latencies on unmount where it waits for _all_ pending blocks to be erased, and we allow better control for time-critical tasks by stopping the GC thread. Signed-off-by: Joakim Tjernlund <joakim.tjernlund@transmode.se> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * jffs2: Rename jffs2_erase_pending_trigger() to jffs2_dirty_trigger()Joakim Tjernlund2010-05-19
| | | | | | | | | | | | | | | | | | Now that we do erases from GC and trigger the GC thread to do them instead of using kupdated, this function is misnamed. It's only used for triggering wbuf flush on NAND flash now. Rename it accordingly. Signed-off-by: Joakim Tjernlund <joakim.tjernlund@transmode.se> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * jffs2: Use jffs2_garbage_collect_trigger() to trigger pending erasesDavid Woodhouse2010-05-19
| | | | | | | | | | | | This is now done in a GC pass; we don't need to trigger kupdated to do it. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * jffs2: Require jffs2_garbage_collect_trigger() to be called with lock heldDavid Woodhouse2010-05-19
| | | | | | | | | | | | | | | | We're about to call this from a bunch of places which already hold c->erase_completion_lock, so add an assertion and change its existing callers to do the same. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * jffs2: Wake GC thread when there are blocks to be erasedJoakim Tjernlund2010-05-19
| | | | | | | | | | | | | | | | | | Now that we trigger block erases from jffs2_garbage_collect_pass(), adjust jffs2_thread_should_wake() to return 1 when there are blocks to erase. Signed-off-by: Joakim Tjernlund <joakim.tjernlund@transmode.se> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * jffs2: Erase pending blocks in GC pass, avoid invalid -EIO returnDavid Woodhouse2010-05-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | jffs2_garbage_collect_pass() would previously return -EAGAIN if it couldn't find anything to garbage collect from, and there were blocks on the erase_pending_list. If the blocks were actually in the process of being erased, though, then they wouldn't be on that list. Check for nr_erasing_blocks being non-zero instead. Fix jffs2_reserve_space() to wait for the in-progress erases to complete, when jffs2_garbage_collect_pass() returns -EAGAIN. And fix jffs2_erase_succeeded() to actually wake up the erase_wait wq that jffs2_reserve_space() is now using. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * jffs2: Add 'work_done' return value from jffs2_erase_pending_blocks()Joakim Tjernlund2010-05-19
| | | | | | | | | | | | | | | | We're about to start calling this from the jffs2_garbage_collect_pass(), and we'll want to know whether it actually did anything or not. Signed-off-by: Joakim Tjernlund <joakim.tjernlund@transmode.se> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: mtdchar: Do not corrupt backing device of device node inodeKirill A. Shutemov2010-05-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We cannot modify file->f_mapping->backing_dev_info, because it will corrupt backing device of device node inode, since file->f_mapping is equal to inode->i_mapping (see __dentry_open() in fs/open.c). Let's introduce separate inode for MTD device with appropriate backing device. [dwmw2: Refactor to keep it all entirely within mtdchar.c; use iget_locked()] Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd/maps/pcmciamtd: Fix printk format for ssize_t in debug messagesDavid Woodhouse2010-05-17
| | | | | | | | Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * drivers/mtd: Use kmemdupJulia Lawall2010-05-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use kmemdup when some other buffer is immediately copied into the allocated region. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; statement S; @@ - to = \(kmalloc\|kzalloc\)(size,flag); + to = kmemdup(from,size,flag); if (to==NULL || ...) S - memcpy(to, from, size); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: cfi_cmdset_0002: Fix argument order in bootloc warningDavid Woodhouse2010-05-14
| | | | | | | | | | | | | | Doh. Pointed out by Guillaume LECERF <glecerf@gmail.com> since I managed to miss it in my test builds. S'what I get for hacking at 2am, I suppose. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: nand: add Toshiba TC58NVG0 device IDFlorian Fainelli2010-05-13
| | | | | | | | | | | | | | | | This NAND flash part advertises 0xD1 as an identifier but is still a working 128MBytes x 8bits 3.3V NAND part. Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * pcmciamtd: add another IDDominik Brodowski2010-05-13
| | | | | | | | | | | | Reported-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * pcmciamtd: coding style cleanupsAlexander Kurz2010-05-13
| | | | | | | | | | | | Signed-off-by: Alexander Kurz <linux@kbdbabel.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * pcmciamtd: fixing obvious errorsAlexander Kurz2010-05-13
| | | | | | | | | | | | | | | | | | | | | | | | | | After fixing the obvious errors, the driver will now compile again on v2.6.34-rc3. First tests with two 4MB flash cards including erase- and write test with one of the cards where successful. Also, add two new PCMCIA_DEVICE_PROD_IDs. [linux@dominikbrodowski.net: clean up commit message] Signed-off-by: Alexander Kurz <linux@kbdbabel.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
generated by cgit v1.2.2 (git 2.25.0) at 2025-02-23 22:10:49 -0500