1 files changed, 6 insertions, 6 deletions

diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index a32f220648c0..a1cc2d498a1c 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -1884,9 +1884,8 @@ static int wl3501_probe(struct pcmcia_device *p_dev)
         struct wl3501_card *this;
 
         /* The io structure describes IO port mapping */
-        p_dev->io.NumPorts1     = 16;
-        p_dev->io.Attributes1   = IO_DATA_PATH_WIDTH_8;
-        p_dev->io.IOAddrLines   = 5;
+        p_dev->resource[0]->end = 16;
+        p_dev->resource[0]->flags       = IO_DATA_PATH_WIDTH_8;
 
         /* General socket configuration */
         p_dev->conf.Attributes  = CONF_ENABLE_IRQ;
@@ -1932,13 +1931,14 @@ static int wl3501_config(struct pcmcia_device *link)
         /* Try allocating IO ports.  This tries a few fixed addresses.  If you
          * want, you can also read the card's config table to pick addresses --
          * see the serial driver for an example. */
+        link->io_lines = 5;
 
         for (j = 0x280; j < 0x400; j += 0x20) {
                 /* The '^0x300' is so that we probe 0x300-0x3ff first, then
                  * 0x200-0x2ff, and so on, because this seems safer */
-                link->io.BasePort1 = j;
-                link->io.BasePort2 = link->io.BasePort1 + 0x10;
-                i = pcmcia_request_io(link, &link->io);
+                link->resource[0]->start = j;
+                link->resource[1]->start = link->resource[0]->start + 0x10;
+                i = pcmcia_request_io(link);
                 if (i == 0)
                         break;
         }