1 files changed, 165 insertions, 0 deletions

diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h
new file mode 100644
index 000000000000..753cd5ce6949
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/usb.h
@@ -0,0 +1,165 @@
+/*
+ * FIXME correct answer depends on hmc_mode,
+ * as does (on omap1) any nonzero value for config->otg port number
+ */
+#ifdef  CONFIG_USB_GADGET_OMAP
+#define is_usb0_device(config)  1
+#else
+#define is_usb0_device(config)  0
+#endif
+
+struct omap_usb_config {
+        /* Configure drivers according to the connectors on your board:
+         *  - "A" connector (rectagular)
+         *      ... for host/OHCI use, set "register_host".
+         *  - "B" connector (squarish) or "Mini-B"
+         *      ... for device/gadget use, set "register_dev".
+         *  - "Mini-AB" connector (very similar to Mini-B)
+         *      ... for OTG use as device OR host, initialize "otg"
+         */
+        unsigned        register_host:1;
+        unsigned        register_dev:1;
+        u8              otg;    /* port number, 1-based:  usb1 == 2 */
+
+        u8              hmc_mode;
+
+        /* implicitly true if otg:  host supports remote wakeup? */
+        u8              rwc;
+
+        /* signaling pins used to talk to transceiver on usbN:
+         *  0 == usbN unused
+         *  2 == usb0-only, using internal transceiver
+         *  3 == 3 wire bidirectional
+         *  4 == 4 wire bidirectional
+         *  6 == 6 wire unidirectional (or TLL)
+         */
+        u8              pins[3];
+
+        struct platform_device *udc_device;
+        struct platform_device *ohci_device;
+        struct platform_device *otg_device;
+
+        u32 (*usb0_init)(unsigned nwires, unsigned is_device);
+        u32 (*usb1_init)(unsigned nwires);
+        u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
+
+        int (*ocpi_enable)(void);
+};
+
+void omap_otg_init(struct omap_usb_config *config);
+
+#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE)
+void omap1_usb_init(struct omap_usb_config *pdata);
+#else
+static inline void omap1_usb_init(struct omap_usb_config *pdata)
+{
+}
+#endif
+
+#define OMAP1_OTG_BASE                  0xfffb0400
+#define OMAP1_UDC_BASE                  0xfffb4000
+#define OMAP1_OHCI_BASE                 0xfffba000
+
+#define OMAP2_OHCI_BASE                 0x4805e000
+#define OMAP2_UDC_BASE                  0x4805e200
+#define OMAP2_OTG_BASE                  0x4805e300
+#define OTG_BASE                        OMAP1_OTG_BASE
+#define UDC_BASE                        OMAP1_UDC_BASE
+#define OMAP_OHCI_BASE                  OMAP1_OHCI_BASE
+
+/*
+ * OTG and transceiver registers, for OMAPs starting with ARM926
+ */
+#define OTG_REV                         (OTG_BASE + 0x00)
+#define OTG_SYSCON_1                    (OTG_BASE + 0x04)
+#       define   USB2_TRX_MODE(w)       (((w)>>24)&0x07)
+#       define   USB1_TRX_MODE(w)       (((w)>>20)&0x07)
+#       define   USB0_TRX_MODE(w)       (((w)>>16)&0x07)
+#       define   OTG_IDLE_EN            (1 << 15)
+#       define   HST_IDLE_EN            (1 << 14)
+#       define   DEV_IDLE_EN            (1 << 13)
+#       define   OTG_RESET_DONE         (1 << 2)
+#       define   OTG_SOFT_RESET         (1 << 1)
+#define OTG_SYSCON_2                    (OTG_BASE + 0x08)
+#       define   OTG_EN                 (1 << 31)
+#       define   USBX_SYNCHRO           (1 << 30)
+#       define   OTG_MST16              (1 << 29)
+#       define   SRP_GPDATA             (1 << 28)
+#       define   SRP_GPDVBUS            (1 << 27)
+#       define   SRP_GPUVBUS(w)         (((w)>>24)&0x07)
+#       define   A_WAIT_VRISE(w)        (((w)>>20)&0x07)
+#       define   B_ASE_BRST(w)          (((w)>>16)&0x07)
+#       define   SRP_DPW                (1 << 14)
+#       define   SRP_DATA               (1 << 13)
+#       define   SRP_VBUS               (1 << 12)
+#       define   OTG_PADEN              (1 << 10)
+#       define   HMC_PADEN              (1 << 9)
+#       define   UHOST_EN               (1 << 8)
+#       define   HMC_TLLSPEED           (1 << 7)
+#       define   HMC_TLLATTACH          (1 << 6)
+#       define   OTG_HMC(w)             (((w)>>0)&0x3f)
+#define OTG_CTRL                        (OTG_BASE + 0x0c)
+#       define   OTG_USB2_EN            (1 << 29)
+#       define   OTG_USB2_DP            (1 << 28)
+#       define   OTG_USB2_DM            (1 << 27)
+#       define   OTG_USB1_EN            (1 << 26)
+#       define   OTG_USB1_DP            (1 << 25)
+#       define   OTG_USB1_DM            (1 << 24)
+#       define   OTG_USB0_EN            (1 << 23)
+#       define   OTG_USB0_DP            (1 << 22)
+#       define   OTG_USB0_DM            (1 << 21)
+#       define   OTG_ASESSVLD           (1 << 20)
+#       define   OTG_BSESSEND           (1 << 19)
+#       define   OTG_BSESSVLD           (1 << 18)
+#       define   OTG_VBUSVLD            (1 << 17)
+#       define   OTG_ID                 (1 << 16)
+#       define   OTG_DRIVER_SEL         (1 << 15)
+#       define   OTG_A_SETB_HNPEN       (1 << 12)
+#       define   OTG_A_BUSREQ           (1 << 11)
+#       define   OTG_B_HNPEN            (1 << 9)
+#       define   OTG_B_BUSREQ           (1 << 8)
+#       define   OTG_BUSDROP            (1 << 7)
+#       define   OTG_PULLDOWN           (1 << 5)
+#       define   OTG_PULLUP             (1 << 4)
+#       define   OTG_DRV_VBUS           (1 << 3)
+#       define   OTG_PD_VBUS            (1 << 2)
+#       define   OTG_PU_VBUS            (1 << 1)
+#       define   OTG_PU_ID              (1 << 0)
+#define OTG_IRQ_EN                      (OTG_BASE + 0x10)       /* 16-bit */
+#       define   DRIVER_SWITCH          (1 << 15)
+#       define   A_VBUS_ERR             (1 << 13)
+#       define   A_REQ_TMROUT           (1 << 12)
+#       define   A_SRP_DETECT           (1 << 11)
+#       define   B_HNP_FAIL             (1 << 10)
+#       define   B_SRP_TMROUT           (1 << 9)
+#       define   B_SRP_DONE             (1 << 8)
+#       define   B_SRP_STARTED          (1 << 7)
+#       define   OPRT_CHG               (1 << 0)
+#define OTG_IRQ_SRC                     (OTG_BASE + 0x14)       /* 16-bit */
+        // same bits as in IRQ_EN
+#define OTG_OUTCTRL                     (OTG_BASE + 0x18)       /* 16-bit */
+#       define   OTGVPD                 (1 << 14)
+#       define   OTGVPU                 (1 << 13)
+#       define   OTGPUID                (1 << 12)
+#       define   USB2VDR                (1 << 10)
+#       define   USB2PDEN               (1 << 9)
+#       define   USB2PUEN               (1 << 8)
+#       define   USB1VDR                (1 << 6)
+#       define   USB1PDEN               (1 << 5)
+#       define   USB1PUEN               (1 << 4)
+#       define   USB0VDR                (1 << 2)
+#       define   USB0PDEN               (1 << 1)
+#       define   USB0PUEN               (1 << 0)
+#define OTG_TEST                        (OTG_BASE + 0x20)       /* 16-bit */
+#define OTG_VENDOR_CODE                 (OTG_BASE + 0xfc)       /* 16-bit */
+
+/*-------------------------------------------------------------------------*/
+
+/* OMAP1 */
+#define USB_TRANSCEIVER_CTRL            (0xfffe1000 + 0x0064)
+#       define  CONF_USB2_UNI_R         (1 << 8)
+#       define  CONF_USB1_UNI_R         (1 << 7)
+#       define  CONF_USB_PORT0_R(x)     (((x)>>4)&0x7)
+#       define  CONF_USB0_ISOLATE_R     (1 << 3)
+#       define  CONF_USB_PWRDN_DM_R     (1 << 2)
+#       define  CONF_USB_PWRDN_DP_R     (1 << 1)