3 files changed, 3 insertions, 3 deletions

diff --git a/Documentation/input/joystick-parport.txt b/Documentation/input/joystick-parport.txt
index 1c856f32ff2c..56870c70a796 100644
--- a/Documentation/input/joystick-parport.txt
+++ b/Documentation/input/joystick-parport.txt
@@ -272,7 +272,7 @@ if you want to use gamecon.c.
 
   Also, the connection is a bit more complex. You'll need a bunch of diodes,
 and one pullup resistor. First, you connect the Directions and the button
-the same as for db9, however with the diodes inbetween.
+the same as for db9, however with the diodes between.
 
             Diodes
 (pin 2) -----|<|----> Up
diff --git a/Documentation/input/rotary-encoder.txt b/Documentation/input/rotary-encoder.txt
index 8b4129de1d2d..943e8f6f2b15 100644
--- a/Documentation/input/rotary-encoder.txt
+++ b/Documentation/input/rotary-encoder.txt
@@ -46,7 +46,7 @@ c) Falling edge on channel A, channel B in high state
 
 d) Falling edge on channel B, channel A in low state
         Parking position. If the encoder enters this state, a full transition
-        should have happend, unless it flipped back on half the way. The
+        should have happened, unless it flipped back on half the way. The
         'armed' state tells us about that.
 
 2. Platform requirements
diff --git a/Documentation/input/walkera0701.txt b/Documentation/input/walkera0701.txt
index 8f4289efc5c4..561385d38482 100644
--- a/Documentation/input/walkera0701.txt
+++ b/Documentation/input/walkera0701.txt
@@ -77,7 +77,7 @@ pulse length:
 
 24 bin+oct values + 1 bin value = 24*4+1 bits  = 97 bits
 
-(Warning, pulses on ACK ar inverted by transistor, irq is rised up on sync
+(Warning, pulses on ACK are inverted by transistor, irq is raised up on sync
 to bin change or octal value to bin change).
 
 Binary data representations: