From dca3f53c02e325bb19dfc05b1571b9a706226fea Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Thu, 4 Aug 2016 12:11:55 +0200 Subject: sctp: Export struct sctp_info to userspace This is required to correctly interpret INET_DIAG_INFO messages exported by sctp_diag module. Signed-off-by: Phil Sutter Signed-off-by: David S. Miller --- include/linux/sctp.h | 64 ---------------------------------------------------- 1 file changed, 64 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sctp.h b/include/linux/sctp.h index de1f64318fc4..fcb4c3646173 100644 --- a/include/linux/sctp.h +++ b/include/linux/sctp.h @@ -705,70 +705,6 @@ typedef struct sctp_auth_chunk { sctp_authhdr_t auth_hdr; } __packed sctp_auth_chunk_t; -struct sctp_info { - __u32 sctpi_tag; - __u32 sctpi_state; - __u32 sctpi_rwnd; - __u16 sctpi_unackdata; - __u16 sctpi_penddata; - __u16 sctpi_instrms; - __u16 sctpi_outstrms; - __u32 sctpi_fragmentation_point; - __u32 sctpi_inqueue; - __u32 sctpi_outqueue; - __u32 sctpi_overall_error; - __u32 sctpi_max_burst; - __u32 sctpi_maxseg; - __u32 sctpi_peer_rwnd; - __u32 sctpi_peer_tag; - __u8 sctpi_peer_capable; - __u8 sctpi_peer_sack; - __u16 __reserved1; - - /* assoc status info */ - __u64 sctpi_isacks; - __u64 sctpi_osacks; - __u64 sctpi_opackets; - __u64 sctpi_ipackets; - __u64 sctpi_rtxchunks; - __u64 sctpi_outofseqtsns; - __u64 sctpi_idupchunks; - __u64 sctpi_gapcnt; - __u64 sctpi_ouodchunks; - __u64 sctpi_iuodchunks; - __u64 sctpi_oodchunks; - __u64 sctpi_iodchunks; - __u64 sctpi_octrlchunks; - __u64 sctpi_ictrlchunks; - - /* primary transport info */ - struct sockaddr_storage sctpi_p_address; - __s32 sctpi_p_state; - __u32 sctpi_p_cwnd; - __u32 sctpi_p_srtt; - __u32 sctpi_p_rto; - __u32 sctpi_p_hbinterval; - __u32 sctpi_p_pathmaxrxt; - __u32 sctpi_p_sackdelay; - __u32 sctpi_p_sackfreq; - __u32 sctpi_p_ssthresh; - __u32 sctpi_p_partial_bytes_acked; - __u32 sctpi_p_flight_size; - __u16 sctpi_p_error; - __u16 __reserved2; - - /* sctp sock info */ - __u32 sctpi_s_autoclose; - __u32 sctpi_s_adaptation_ind; - __u32 sctpi_s_pd_point; - __u8 sctpi_s_nodelay; - __u8 sctpi_s_disable_fragments; - __u8 sctpi_s_v4mapped; - __u8 sctpi_s_frag_interleave; - __u32 sctpi_s_type; - __u32 __reserved3; -}; - struct sctp_infox { struct sctp_info *sctpinfo; struct sctp_association *asoc; -- cgit v1.2.2 From 479ffcccefd7b04442b0e949f8779b0612e8c75f Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Fri, 5 Aug 2016 00:11:12 +0200 Subject: bpf: fix checksum fixups on bpf_skb_store_bytes bpf_skb_store_bytes() invocations above L2 header need BPF_F_RECOMPUTE_CSUM flag for updates, so that CHECKSUM_COMPLETE will be fixed up along the way. Where we ran into an issue with bpf_skb_store_bytes() is when we did a single-byte update on the IPv6 hoplimit despite using BPF_F_RECOMPUTE_CSUM flag; simple ping via ICMPv6 triggered a hw csum failure as a result. The underlying issue has been tracked down to a buffer alignment issue. Meaning, that csum_partial() computations via skb_postpull_rcsum() and skb_postpush_rcsum() pair invoked had a wrong result since they operated on an odd address for the hoplimit, while other computations were done on an even address. This mix doesn't work as-is with skb_postpull_rcsum(), skb_postpush_rcsum() pair as it always expects at least half-word alignment of input buffers, which is normally the case. Thus, instead of these helpers using csum_sub() and (implicitly) csum_add(), we need to use csum_block_sub(), csum_block_add(), respectively. For unaligned offsets, they rotate the sum to align it to a half-word boundary again, otherwise they work the same as csum_sub() and csum_add(). Adding __skb_postpull_rcsum(), __skb_postpush_rcsum() variants that take the offset as an input and adapting bpf_skb_store_bytes() to them fixes the hw csum failures again. The skb_postpull_rcsum(), skb_postpush_rcsum() helpers use a 0 constant for offset so that the compiler optimizes the offset & 1 test away and generates the same code as with csum_sub()/_add(). Fixes: 608cd71a9c7c ("tc: bpf: generalize pedit action") Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- include/linux/skbuff.h | 52 ++++++++++++++++++++++++++++++++------------------ 1 file changed, 33 insertions(+), 19 deletions(-) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 6f0b3e0adc73..0f665cb26b50 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -2847,6 +2847,18 @@ static inline int skb_linearize_cow(struct sk_buff *skb) __skb_linearize(skb) : 0; } +static __always_inline void +__skb_postpull_rcsum(struct sk_buff *skb, const void *start, unsigned int len, + unsigned int off) +{ + if (skb->ip_summed == CHECKSUM_COMPLETE) + skb->csum = csum_block_sub(skb->csum, + csum_partial(start, len, 0), off); + else if (skb->ip_summed == CHECKSUM_PARTIAL && + skb_checksum_start_offset(skb) < 0) + skb->ip_summed = CHECKSUM_NONE; +} + /** * skb_postpull_rcsum - update checksum for received skb after pull * @skb: buffer to update @@ -2857,36 +2869,38 @@ static inline int skb_linearize_cow(struct sk_buff *skb) * update the CHECKSUM_COMPLETE checksum, or set ip_summed to * CHECKSUM_NONE so that it can be recomputed from scratch. */ - static inline void skb_postpull_rcsum(struct sk_buff *skb, const void *start, unsigned int len) { - if (skb->ip_summed == CHECKSUM_COMPLETE) - skb->csum = csum_sub(skb->csum, csum_partial(start, len, 0)); - else if (skb->ip_summed == CHECKSUM_PARTIAL && - skb_checksum_start_offset(skb) < 0) - skb->ip_summed = CHECKSUM_NONE; + __skb_postpull_rcsum(skb, start, len, 0); } -unsigned char *skb_pull_rcsum(struct sk_buff *skb, unsigned int len); +static __always_inline void +__skb_postpush_rcsum(struct sk_buff *skb, const void *start, unsigned int len, + unsigned int off) +{ + if (skb->ip_summed == CHECKSUM_COMPLETE) + skb->csum = csum_block_add(skb->csum, + csum_partial(start, len, 0), off); +} +/** + * skb_postpush_rcsum - update checksum for received skb after push + * @skb: buffer to update + * @start: start of data after push + * @len: length of data pushed + * + * After doing a push on a received packet, you need to call this to + * update the CHECKSUM_COMPLETE checksum. + */ static inline void skb_postpush_rcsum(struct sk_buff *skb, const void *start, unsigned int len) { - /* For performing the reverse operation to skb_postpull_rcsum(), - * we can instead of ... - * - * skb->csum = csum_add(skb->csum, csum_partial(start, len, 0)); - * - * ... just use this equivalent version here to save a few - * instructions. Feeding csum of 0 in csum_partial() and later - * on adding skb->csum is equivalent to feed skb->csum in the - * first place. - */ - if (skb->ip_summed == CHECKSUM_COMPLETE) - skb->csum = csum_partial(start, len, skb->csum); + __skb_postpush_rcsum(skb, start, len, 0); } +unsigned char *skb_pull_rcsum(struct sk_buff *skb, unsigned int len); + /** * skb_push_rcsum - push skb and update receive checksum * @skb: buffer to update -- cgit v1.2.2 From 59bcb7972fc5d53a621ee6b2c3cf1654cebb3dc5 Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Mon, 8 Aug 2016 21:57:42 -0400 Subject: qed: Add dcbx app support for IEEE Selection Field. MFW now supports the Selection field for IEEE mode. Add driver changes to use the newer MFW masks to read/write the port-id value. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- include/linux/qed/qed_if.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/qed/qed_if.h b/include/linux/qed/qed_if.h index b1e3c57c7117..d6c4177df7cb 100644 --- a/include/linux/qed/qed_if.h +++ b/include/linux/qed/qed_if.h @@ -70,8 +70,16 @@ struct qed_dbcx_pfc_params { u8 max_tc; }; +enum qed_dcbx_sf_ieee_type { + QED_DCBX_SF_IEEE_ETHTYPE, + QED_DCBX_SF_IEEE_TCP_PORT, + QED_DCBX_SF_IEEE_UDP_PORT, + QED_DCBX_SF_IEEE_TCP_UDP_PORT +}; + struct qed_app_entry { bool ethtype; + enum qed_dcbx_sf_ieee_type sf_ieee; bool enabled; u8 prio; u16 proto_id; -- cgit v1.2.2 From fd837b08d98c0c9f4f31998f2ed55b9d8694082c Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Mon, 8 Aug 2016 17:29:28 +0100 Subject: KVM: arm64: ITS: return 1 on successful MSI injection According to the KVM API documentation a successful MSI injection should return a value > 0 on success. Return possible errors in vgic_its_trigger_msi() and report a successful injection back to userland, while also reporting the case where the MSI could not be delivered due to the guest not having the LPI mapped, for instance. Signed-off-by: Andre Przywara Reviewed-by: Eric Auger Reviewed-by: Christoffer Dall Signed-off-by: Christoffer Dall --- include/linux/irqchip/arm-gic-v3.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h index 56b0b7ec66aa..99ac022edc60 100644 --- a/include/linux/irqchip/arm-gic-v3.h +++ b/include/linux/irqchip/arm-gic-v3.h @@ -337,6 +337,7 @@ */ #define E_ITS_MOVI_UNMAPPED_INTERRUPT 0x010107 #define E_ITS_MOVI_UNMAPPED_COLLECTION 0x010109 +#define E_ITS_INT_UNMAPPED_INTERRUPT 0x010307 #define E_ITS_CLEAR_UNMAPPED_INTERRUPT 0x010507 #define E_ITS_MAPD_DEVICE_OOR 0x010801 #define E_ITS_MAPC_PROCNUM_OOR 0x010902 -- cgit v1.2.2 From 1766e7b3763a0707c2fda9689a7866dceed07b7a Mon Sep 17 00:00:00 2001 From: David Lechner Date: Wed, 10 Aug 2016 18:49:27 +0530 Subject: mfd: da8xx-cfgchip: New header file for CFGCHIP registers Create a new header file for TI DA8XX SoC CFGCHIPx registers. This will be used by a number of planned drivers including a new USB PHY driver and common clock framework drivers. The same defines *will* be removed from the platform_data header, once all the users start using the new syscon device header. This also fixes the following compiler error caused due to a dependent patch not merged. drivers/phy/phy-da8xx-usb.c:19:37: fatal error: linux/mfd/da8xx-cfgchip.h: No such file or directory #include Signed-off-by: David Lechner Acked-by: Lee Jones Reported-by: Arnd Bergmann Signed-off-by: Kishon Vijay Abraham I --- include/linux/mfd/da8xx-cfgchip.h | 153 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 153 insertions(+) create mode 100644 include/linux/mfd/da8xx-cfgchip.h (limited to 'include/linux') diff --git a/include/linux/mfd/da8xx-cfgchip.h b/include/linux/mfd/da8xx-cfgchip.h new file mode 100644 index 000000000000..304985e288d2 --- /dev/null +++ b/include/linux/mfd/da8xx-cfgchip.h @@ -0,0 +1,153 @@ +/* + * TI DaVinci DA8xx CHIPCFGx registers for syscon consumers. + * + * Copyright (C) 2016 David Lechner + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_MFD_DA8XX_CFGCHIP_H +#define __LINUX_MFD_DA8XX_CFGCHIP_H + +#include + +/* register offset (32-bit registers) */ +#define CFGCHIP(n) ((n) * 4) + +/* CFGCHIP0 (PLL0/EDMA3_0) register bits */ +#define CFGCHIP0_PLL_MASTER_LOCK BIT(4) +#define CFGCHIP0_EDMA30TC1DBS(n) ((n) << 2) +#define CFGCHIP0_EDMA30TC1DBS_MASK CFGCHIP0_EDMA30TC1DBS(0x3) +#define CFGCHIP0_EDMA30TC1DBS_16 CFGCHIP0_EDMA30TC1DBS(0x0) +#define CFGCHIP0_EDMA30TC1DBS_32 CFGCHIP0_EDMA30TC1DBS(0x1) +#define CFGCHIP0_EDMA30TC1DBS_64 CFGCHIP0_EDMA30TC1DBS(0x2) +#define CFGCHIP0_EDMA30TC0DBS(n) ((n) << 0) +#define CFGCHIP0_EDMA30TC0DBS_MASK CFGCHIP0_EDMA30TC0DBS(0x3) +#define CFGCHIP0_EDMA30TC0DBS_16 CFGCHIP0_EDMA30TC0DBS(0x0) +#define CFGCHIP0_EDMA30TC0DBS_32 CFGCHIP0_EDMA30TC0DBS(0x1) +#define CFGCHIP0_EDMA30TC0DBS_64 CFGCHIP0_EDMA30TC0DBS(0x2) + +/* CFGCHIP1 (eCAP/HPI/EDMA3_1/eHRPWM TBCLK/McASP0 AMUTEIN) register bits */ +#define CFGCHIP1_CAP2SRC(n) ((n) << 27) +#define CFGCHIP1_CAP2SRC_MASK CFGCHIP1_CAP2SRC(0x1f) +#define CFGCHIP1_CAP2SRC_ECAP_PIN CFGCHIP1_CAP2SRC(0x0) +#define CFGCHIP1_CAP2SRC_MCASP0_TX CFGCHIP1_CAP2SRC(0x1) +#define CFGCHIP1_CAP2SRC_MCASP0_RX CFGCHIP1_CAP2SRC(0x2) +#define CFGCHIP1_CAP2SRC_EMAC_C0_RX_THRESHOLD CFGCHIP1_CAP2SRC(0x7) +#define CFGCHIP1_CAP2SRC_EMAC_C0_RX CFGCHIP1_CAP2SRC(0x8) +#define CFGCHIP1_CAP2SRC_EMAC_C0_TX CFGCHIP1_CAP2SRC(0x9) +#define CFGCHIP1_CAP2SRC_EMAC_C0_MISC CFGCHIP1_CAP2SRC(0xa) +#define CFGCHIP1_CAP2SRC_EMAC_C1_RX_THRESHOLD CFGCHIP1_CAP2SRC(0xb) +#define CFGCHIP1_CAP2SRC_EMAC_C1_RX CFGCHIP1_CAP2SRC(0xc) +#define CFGCHIP1_CAP2SRC_EMAC_C1_TX CFGCHIP1_CAP2SRC(0xd) +#define CFGCHIP1_CAP2SRC_EMAC_C1_MISC CFGCHIP1_CAP2SRC(0xe) +#define CFGCHIP1_CAP2SRC_EMAC_C2_RX_THRESHOLD CFGCHIP1_CAP2SRC(0xf) +#define CFGCHIP1_CAP2SRC_EMAC_C2_RX CFGCHIP1_CAP2SRC(0x10) +#define CFGCHIP1_CAP2SRC_EMAC_C2_TX CFGCHIP1_CAP2SRC(0x11) +#define CFGCHIP1_CAP2SRC_EMAC_C2_MISC CFGCHIP1_CAP2SRC(0x12) +#define CFGCHIP1_CAP1SRC(n) ((n) << 22) +#define CFGCHIP1_CAP1SRC_MASK CFGCHIP1_CAP1SRC(0x1f) +#define CFGCHIP1_CAP1SRC_ECAP_PIN CFGCHIP1_CAP1SRC(0x0) +#define CFGCHIP1_CAP1SRC_MCASP0_TX CFGCHIP1_CAP1SRC(0x1) +#define CFGCHIP1_CAP1SRC_MCASP0_RX CFGCHIP1_CAP1SRC(0x2) +#define CFGCHIP1_CAP1SRC_EMAC_C0_RX_THRESHOLD CFGCHIP1_CAP1SRC(0x7) +#define CFGCHIP1_CAP1SRC_EMAC_C0_RX CFGCHIP1_CAP1SRC(0x8) +#define CFGCHIP1_CAP1SRC_EMAC_C0_TX CFGCHIP1_CAP1SRC(0x9) +#define CFGCHIP1_CAP1SRC_EMAC_C0_MISC CFGCHIP1_CAP1SRC(0xa) +#define CFGCHIP1_CAP1SRC_EMAC_C1_RX_THRESHOLD CFGCHIP1_CAP1SRC(0xb) +#define CFGCHIP1_CAP1SRC_EMAC_C1_RX CFGCHIP1_CAP1SRC(0xc) +#define CFGCHIP1_CAP1SRC_EMAC_C1_TX CFGCHIP1_CAP1SRC(0xd) +#define CFGCHIP1_CAP1SRC_EMAC_C1_MISC CFGCHIP1_CAP1SRC(0xe) +#define CFGCHIP1_CAP1SRC_EMAC_C2_RX_THRESHOLD CFGCHIP1_CAP1SRC(0xf) +#define CFGCHIP1_CAP1SRC_EMAC_C2_RX CFGCHIP1_CAP1SRC(0x10) +#define CFGCHIP1_CAP1SRC_EMAC_C2_TX CFGCHIP1_CAP1SRC(0x11) +#define CFGCHIP1_CAP1SRC_EMAC_C2_MISC CFGCHIP1_CAP1SRC(0x12) +#define CFGCHIP1_CAP0SRC(n) ((n) << 17) +#define CFGCHIP1_CAP0SRC_MASK CFGCHIP1_CAP0SRC(0x1f) +#define CFGCHIP1_CAP0SRC_ECAP_PIN CFGCHIP1_CAP0SRC(0x0) +#define CFGCHIP1_CAP0SRC_MCASP0_TX CFGCHIP1_CAP0SRC(0x1) +#define CFGCHIP1_CAP0SRC_MCASP0_RX CFGCHIP1_CAP0SRC(0x2) +#define CFGCHIP1_CAP0SRC_EMAC_C0_RX_THRESHOLD CFGCHIP1_CAP0SRC(0x7) +#define CFGCHIP1_CAP0SRC_EMAC_C0_RX CFGCHIP1_CAP0SRC(0x8) +#define CFGCHIP1_CAP0SRC_EMAC_C0_TX CFGCHIP1_CAP0SRC(0x9) +#define CFGCHIP1_CAP0SRC_EMAC_C0_MISC CFGCHIP1_CAP0SRC(0xa) +#define CFGCHIP1_CAP0SRC_EMAC_C1_RX_THRESHOLD CFGCHIP1_CAP0SRC(0xb) +#define CFGCHIP1_CAP0SRC_EMAC_C1_RX CFGCHIP1_CAP0SRC(0xc) +#define CFGCHIP1_CAP0SRC_EMAC_C1_TX CFGCHIP1_CAP0SRC(0xd) +#define CFGCHIP1_CAP0SRC_EMAC_C1_MISC CFGCHIP1_CAP0SRC(0xe) +#define CFGCHIP1_CAP0SRC_EMAC_C2_RX_THRESHOLD CFGCHIP1_CAP0SRC(0xf) +#define CFGCHIP1_CAP0SRC_EMAC_C2_RX CFGCHIP1_CAP0SRC(0x10) +#define CFGCHIP1_CAP0SRC_EMAC_C2_TX CFGCHIP1_CAP0SRC(0x11) +#define CFGCHIP1_CAP0SRC_EMAC_C2_MISC CFGCHIP1_CAP0SRC(0x12) +#define CFGCHIP1_HPIBYTEAD BIT(16) +#define CFGCHIP1_HPIENA BIT(15) +#define CFGCHIP0_EDMA31TC0DBS(n) ((n) << 13) +#define CFGCHIP0_EDMA31TC0DBS_MASK CFGCHIP0_EDMA31TC0DBS(0x3) +#define CFGCHIP0_EDMA31TC0DBS_16 CFGCHIP0_EDMA31TC0DBS(0x0) +#define CFGCHIP0_EDMA31TC0DBS_32 CFGCHIP0_EDMA31TC0DBS(0x1) +#define CFGCHIP0_EDMA31TC0DBS_64 CFGCHIP0_EDMA31TC0DBS(0x2) +#define CFGCHIP1_TBCLKSYNC BIT(12) +#define CFGCHIP1_AMUTESEL0(n) ((n) << 0) +#define CFGCHIP1_AMUTESEL0_MASK CFGCHIP1_AMUTESEL0(0xf) +#define CFGCHIP1_AMUTESEL0_LOW CFGCHIP1_AMUTESEL0(0x0) +#define CFGCHIP1_AMUTESEL0_BANK_0 CFGCHIP1_AMUTESEL0(0x1) +#define CFGCHIP1_AMUTESEL0_BANK_1 CFGCHIP1_AMUTESEL0(0x2) +#define CFGCHIP1_AMUTESEL0_BANK_2 CFGCHIP1_AMUTESEL0(0x3) +#define CFGCHIP1_AMUTESEL0_BANK_3 CFGCHIP1_AMUTESEL0(0x4) +#define CFGCHIP1_AMUTESEL0_BANK_4 CFGCHIP1_AMUTESEL0(0x5) +#define CFGCHIP1_AMUTESEL0_BANK_5 CFGCHIP1_AMUTESEL0(0x6) +#define CFGCHIP1_AMUTESEL0_BANK_6 CFGCHIP1_AMUTESEL0(0x7) +#define CFGCHIP1_AMUTESEL0_BANK_7 CFGCHIP1_AMUTESEL0(0x8) + +/* CFGCHIP2 (USB PHY) register bits */ +#define CFGCHIP2_PHYCLKGD BIT(17) +#define CFGCHIP2_VBUSSENSE BIT(16) +#define CFGCHIP2_RESET BIT(15) +#define CFGCHIP2_OTGMODE(n) ((n) << 13) +#define CFGCHIP2_OTGMODE_MASK CFGCHIP2_OTGMODE(0x3) +#define CFGCHIP2_OTGMODE_NO_OVERRIDE CFGCHIP2_OTGMODE(0x0) +#define CFGCHIP2_OTGMODE_FORCE_HOST CFGCHIP2_OTGMODE(0x1) +#define CFGCHIP2_OTGMODE_FORCE_DEVICE CFGCHIP2_OTGMODE(0x2) +#define CFGCHIP2_OTGMODE_FORCE_HOST_VBUS_LOW CFGCHIP2_OTGMODE(0x3) +#define CFGCHIP2_USB1PHYCLKMUX BIT(12) +#define CFGCHIP2_USB2PHYCLKMUX BIT(11) +#define CFGCHIP2_PHYPWRDN BIT(10) +#define CFGCHIP2_OTGPWRDN BIT(9) +#define CFGCHIP2_DATPOL BIT(8) +#define CFGCHIP2_USB1SUSPENDM BIT(7) +#define CFGCHIP2_PHY_PLLON BIT(6) +#define CFGCHIP2_SESENDEN BIT(5) +#define CFGCHIP2_VBDTCTEN BIT(4) +#define CFGCHIP2_REFFREQ(n) ((n) << 0) +#define CFGCHIP2_REFFREQ_MASK CFGCHIP2_REFFREQ(0xf) +#define CFGCHIP2_REFFREQ_12MHZ CFGCHIP2_REFFREQ(0x1) +#define CFGCHIP2_REFFREQ_24MHZ CFGCHIP2_REFFREQ(0x2) +#define CFGCHIP2_REFFREQ_48MHZ CFGCHIP2_REFFREQ(0x3) +#define CFGCHIP2_REFFREQ_19_2MHZ CFGCHIP2_REFFREQ(0x4) +#define CFGCHIP2_REFFREQ_38_4MHZ CFGCHIP2_REFFREQ(0x5) +#define CFGCHIP2_REFFREQ_13MHZ CFGCHIP2_REFFREQ(0x6) +#define CFGCHIP2_REFFREQ_26MHZ CFGCHIP2_REFFREQ(0x7) +#define CFGCHIP2_REFFREQ_20MHZ CFGCHIP2_REFFREQ(0x8) +#define CFGCHIP2_REFFREQ_40MHZ CFGCHIP2_REFFREQ(0x9) + +/* CFGCHIP3 (EMAC/uPP/PLL1/ASYNC3/PRU/DIV4.5/EMIFA) register bits */ +#define CFGCHIP3_RMII_SEL BIT(8) +#define CFGCHIP3_UPP_TX_CLKSRC BIT(6) +#define CFGCHIP3_PLL1_MASTER_LOCK BIT(5) +#define CFGCHIP3_ASYNC3_CLKSRC BIT(4) +#define CFGCHIP3_PRUEVTSEL BIT(3) +#define CFGCHIP3_DIV45PENA BIT(2) +#define CFGCHIP3_EMA_CLKSRC BIT(1) + +/* CFGCHIP4 (McASP0 AMUNTEIN) register bits */ +#define CFGCHIP4_AMUTECLR0 BIT(0) + +#endif /* __LINUX_MFD_DA8XX_CFGCHIP_H */ -- cgit v1.2.2 From 952fcfd08c8109951622579d0ae7b9cd6cafd688 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Fri, 12 Aug 2016 16:10:33 +0200 Subject: net: remove type_check from dev_get_nest_level() The idea for type_check in dev_get_nest_level() was to count the number of nested devices of the same type (currently, only macvlan or vlan devices). This prevented the false positive lockdep warning on configurations such as: eth0 <--- macvlan0 <--- vlan0 <--- macvlan1 However, this doesn't prevent a warning on a configuration such as: eth0 <--- macvlan0 <--- vlan0 eth1 <--- vlan1 <--- macvlan1 In this case, all the locks end up with a nesting subclass of 1, so lockdep thinks that there is still a deadlock: - in the first case we have (macvlan_netdev_addr_lock_key, 1) and then take (vlan_netdev_xmit_lock_key, 1) - in the second case, we have (vlan_netdev_xmit_lock_key, 1) and then take (macvlan_netdev_addr_lock_key, 1) By removing the linktype check in dev_get_nest_level() and always incrementing the nesting depth, lockdep considers this configuration valid. Signed-off-by: Sabrina Dubroca Signed-off-by: David S. Miller --- include/linux/netdevice.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 076df5360ba5..3a788bf0affd 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -3891,8 +3891,7 @@ void netdev_default_l2upper_neigh_destroy(struct net_device *dev, extern u8 netdev_rss_key[NETDEV_RSS_KEY_LEN] __read_mostly; void netdev_rss_key_fill(void *buffer, size_t len); -int dev_get_nest_level(struct net_device *dev, - bool (*type_check)(const struct net_device *dev)); +int dev_get_nest_level(struct net_device *dev); int skb_checksum_help(struct sk_buff *skb); struct sk_buff *__skb_gso_segment(struct sk_buff *skb, netdev_features_t features, bool tx_path); -- cgit v1.2.2 From b2f0c09664b72b2f8c581383a9337ac3092e42c8 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 11 Jul 2016 13:50:01 +0200 Subject: iio: sw-trigger: Fix config group initialization Use the IS_ENABLED() helper macro to ensure that the configfs group is initialized either when configfs is built-in or when configfs is built as a module. Otherwise software trigger creation will result in undefined behaviour when configfs is built as a mdoule since the configfs group for the trigger is not properly initialized. Fixes: b662f809d410 ("iio: core: Introduce IIO software triggers") Signed-off-by: Lars-Peter Clausen Acked-by: Daniel Baluta Cc: Signed-off-by: Jonathan Cameron --- include/linux/iio/sw_trigger.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/iio/sw_trigger.h b/include/linux/iio/sw_trigger.h index 5198f8ed08a4..c97eab67558f 100644 --- a/include/linux/iio/sw_trigger.h +++ b/include/linux/iio/sw_trigger.h @@ -62,7 +62,7 @@ void iio_swt_group_init_type_name(struct iio_sw_trigger *t, const char *name, struct config_item_type *type) { -#ifdef CONFIG_CONFIGFS_FS +#if IS_ENABLED(CONFIG_CONFIGFS_FS) config_group_init_type_name(&t->group, name, type); #endif } -- cgit v1.2.2 From 7afafc8a44bf0ab841b17d450b02aedb3a138985 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Tue, 16 Aug 2016 10:59:35 +0300 Subject: block: Fix secure erase Commit 288dab8a35a0 ("block: add a separate operation type for secure erase") split REQ_OP_SECURE_ERASE from REQ_OP_DISCARD without considering all the places REQ_OP_DISCARD was being used to mean either. Fix those. Signed-off-by: Adrian Hunter Fixes: 288dab8a35a0 ("block: add a separate operation type for secure erase") Signed-off-by: Jens Axboe --- include/linux/bio.h | 10 ++++++++-- include/linux/blkdev.h | 6 ++++-- 2 files changed, 12 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/bio.h b/include/linux/bio.h index 59ffaa68b11b..23ddf4b46a9b 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -71,7 +71,8 @@ static inline bool bio_has_data(struct bio *bio) { if (bio && bio->bi_iter.bi_size && - bio_op(bio) != REQ_OP_DISCARD) + bio_op(bio) != REQ_OP_DISCARD && + bio_op(bio) != REQ_OP_SECURE_ERASE) return true; return false; @@ -79,7 +80,9 @@ static inline bool bio_has_data(struct bio *bio) static inline bool bio_no_advance_iter(struct bio *bio) { - return bio_op(bio) == REQ_OP_DISCARD || bio_op(bio) == REQ_OP_WRITE_SAME; + return bio_op(bio) == REQ_OP_DISCARD || + bio_op(bio) == REQ_OP_SECURE_ERASE || + bio_op(bio) == REQ_OP_WRITE_SAME; } static inline bool bio_is_rw(struct bio *bio) @@ -199,6 +202,9 @@ static inline unsigned bio_segments(struct bio *bio) if (bio_op(bio) == REQ_OP_DISCARD) return 1; + if (bio_op(bio) == REQ_OP_SECURE_ERASE) + return 1; + if (bio_op(bio) == REQ_OP_WRITE_SAME) return 1; diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 2c210b6a7bcf..e79055c8b577 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -882,7 +882,7 @@ static inline unsigned int blk_rq_cur_sectors(const struct request *rq) static inline unsigned int blk_queue_get_max_sectors(struct request_queue *q, int op) { - if (unlikely(op == REQ_OP_DISCARD)) + if (unlikely(op == REQ_OP_DISCARD || op == REQ_OP_SECURE_ERASE)) return min(q->limits.max_discard_sectors, UINT_MAX >> 9); if (unlikely(op == REQ_OP_WRITE_SAME)) @@ -913,7 +913,9 @@ static inline unsigned int blk_rq_get_max_sectors(struct request *rq, if (unlikely(rq->cmd_type != REQ_TYPE_FS)) return q->limits.max_hw_sectors; - if (!q->limits.chunk_sectors || (req_op(rq) == REQ_OP_DISCARD)) + if (!q->limits.chunk_sectors || + req_op(rq) == REQ_OP_DISCARD || + req_op(rq) == REQ_OP_SECURE_ERASE) return blk_queue_get_max_sectors(q, req_op(rq)); return min(blk_max_size_offset(q, offset), -- cgit v1.2.2 From 4fe0d154880bb6eb833cbe84fa6f385f400f0b9c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 11 Aug 2016 07:11:04 -0700 Subject: PCI: Use positive flags in pci_alloc_irq_vectors() Instead of passing negative flags like PCI_IRQ_NOMSI to prevent use of certain interrupt types, pass positive flags like PCI_IRQ_LEGACY, PCI_IRQ_MSI, etc., to specify the acceptable interrupt types. This is based on a number of pending driver conversions that just happend to be a whole more obvious to read this way, and given that we have no users in the tree yet it can still easily be done. I've also added a PCI_IRQ_ALL_TYPES catchall to keep the case of accepting all interrupt types very simple. [bhelgaas: changelog, fix PCI_IRQ_AFFINITY doc typo, remove mention of PCI_IRQ_NOLEGACY] Signed-off-by: Christoph Hellwig Signed-off-by: Bjorn Helgaas Reviewed-by: Alexander Gordeev --- include/linux/pci.h | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index 2599a980340f..fbc1fa625c3e 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1251,10 +1251,12 @@ resource_size_t pcibios_iov_resource_alignment(struct pci_dev *dev, int resno); int pci_set_vga_state(struct pci_dev *pdev, bool decode, unsigned int command_bits, u32 flags); -#define PCI_IRQ_NOLEGACY (1 << 0) /* don't use legacy interrupts */ -#define PCI_IRQ_NOMSI (1 << 1) /* don't use MSI interrupts */ -#define PCI_IRQ_NOMSIX (1 << 2) /* don't use MSI-X interrupts */ -#define PCI_IRQ_NOAFFINITY (1 << 3) /* don't auto-assign affinity */ +#define PCI_IRQ_LEGACY (1 << 0) /* allow legacy interrupts */ +#define PCI_IRQ_MSI (1 << 1) /* allow MSI interrupts */ +#define PCI_IRQ_MSIX (1 << 2) /* allow MSI-X interrupts */ +#define PCI_IRQ_AFFINITY (1 << 3) /* auto-assign affinity */ +#define PCI_IRQ_ALL_TYPES \ + (PCI_IRQ_LEGACY | PCI_IRQ_MSI | PCI_IRQ_MSIX) /* kmem_cache style wrapper around pci_alloc_consistent() */ -- cgit v1.2.2 From aca300183ed4f723837f6619facff0890c46d313 Mon Sep 17 00:00:00 2001 From: Liping Zhang Date: Sat, 13 Aug 2016 23:13:02 +0800 Subject: netfilter: nfnetlink_acct: report overquota to the right netns We should report the over quota message to the right net namespace instead of the init netns. Signed-off-by: Liping Zhang Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/nfnetlink_acct.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netfilter/nfnetlink_acct.h b/include/linux/netfilter/nfnetlink_acct.h index 80ca889b164e..664da0048625 100644 --- a/include/linux/netfilter/nfnetlink_acct.h +++ b/include/linux/netfilter/nfnetlink_acct.h @@ -15,6 +15,6 @@ struct nf_acct; struct nf_acct *nfnl_acct_find_get(struct net *net, const char *filter_name); void nfnl_acct_put(struct nf_acct *acct); void nfnl_acct_update(const struct sk_buff *skb, struct nf_acct *nfacct); -extern int nfnl_acct_overquota(const struct sk_buff *skb, - struct nf_acct *nfacct); +int nfnl_acct_overquota(struct net *net, const struct sk_buff *skb, + struct nf_acct *nfacct); #endif /* _NFNL_ACCT_H */ -- cgit v1.2.2 From 112dc0c8069e5554e0ad29c58228f1e6ca49e13d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 11 Aug 2016 11:50:22 +0200 Subject: locking/barriers: Suppress sparse warnings in lockless_dereference() After Peter's commit: 331b6d8c7afc ("locking/barriers: Validate lockless_dereference() is used on a pointer type") ... we get a lot of sparse warnings (one for every rcu_dereference, and more) since the expression here is assigning to the wrong address space. Instead of validating that 'p' is a pointer this way, instead make it fail compilation when it's not by using sizeof(*(p)). This will not cause any sparse warnings (tested, likely since the address space is irrelevant for sizeof), and will fail compilation when 'p' isn't a pointer type. Tested-by: Paul E. McKenney Signed-off-by: Johannes Berg Signed-off-by: Peter Zijlstra (Intel) Cc: Andrew Morton Cc: Chris Wilson Cc: Daniel Vetter Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Fixes: 331b6d8c7afc ("locking/barriers: Validate lockless_dereference() is used on a pointer type") Link: http://lkml.kernel.org/r/1470909022-687-2-git-send-email-johannes@sipsolutions.net Signed-off-by: Ingo Molnar --- include/linux/compiler.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/compiler.h b/include/linux/compiler.h index 1bb954842725..436aa4e42221 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -527,13 +527,13 @@ static __always_inline void __write_once_size(volatile void *p, void *res, int s * object's lifetime is managed by something other than RCU. That * "something other" might be reference counting or simple immortality. * - * The seemingly unused void * variable is to validate @p is indeed a pointer - * type. All pointer types silently cast to void *. + * The seemingly unused size_t variable is to validate @p is indeed a pointer + * type by making sure it can be dereferenced. */ #define lockless_dereference(p) \ ({ \ typeof(p) _________p1 = READ_ONCE(p); \ - __maybe_unused const void * const _________p2 = _________p1; \ + size_t __maybe_unused __size_of_ptr = sizeof(*(p)); \ smp_read_barrier_depends(); /* Dependency order vs. p above. */ \ (_________p1); \ }) -- cgit v1.2.2 From 7a665d2f60b457c0d77b3e4f01e21c55ffc57069 Mon Sep 17 00:00:00 2001 From: Daniel Verkamp Date: Tue, 28 Jun 2016 11:20:23 -0700 Subject: nvme-fabrics: change NQN UUID to big-endian format NVM Express 1.2.1 section 7.9, NVMe Qualified Names, specifies that the UUID format of NQN uses a UUID based on RFC 4122. RFC 4122 specifies that the UUID is encoded in big-endian byte order. Switch the NVMe over Fabrics host ID field from little-endian UUID to big-endian UUID to match the specification. Signed-off-by: Daniel Verkamp Reviewed-by: Jay Freyensee Signed-off-by: Sagi Grimberg --- include/linux/nvme.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/nvme.h b/include/linux/nvme.h index d8b37bab2887..7676557ce357 100644 --- a/include/linux/nvme.h +++ b/include/linux/nvme.h @@ -794,7 +794,7 @@ struct nvmf_connect_command { }; struct nvmf_connect_data { - uuid_le hostid; + uuid_be hostid; __le16 cntlid; char resv4[238]; char subsysnqn[NVMF_NQN_FIELD_LEN]; -- cgit v1.2.2 From c0678b2d6648ab65b68703044709e367799ba9f9 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 15 Aug 2016 15:52:23 -0700 Subject: include/linux: fix excess fence.h kernel-doc notation Fix excess fields in kernel-doc notation in after some struct fields were removed. Fixes these kernel-doc warnings: ..//include/linux/fence.h:85: warning: Excess struct/union/enum/typedef member 'child_list' description in 'fence' ..//include/linux/fence.h:85: warning: Excess struct/union/enum/typedef member 'active_list' description in 'fence' Fixes: 0431b9065f28 ("staging/android: bring struct sync_pt back") Cc: Daniel Vetter Cc: Sumit Semwal Cc: Luis de Bethencourt Signed-off-by: Randy Dunlap Reviewed-by: Gustavo Padovan Signed-off-by: Greg Kroah-Hartman --- include/linux/fence.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fence.h b/include/linux/fence.h index 8cc719a63728..2ac6fa5f4712 100644 --- a/include/linux/fence.h +++ b/include/linux/fence.h @@ -49,8 +49,6 @@ struct fence_cb; * @timestamp: Timestamp when the fence was signaled. * @status: Optional, only valid if < 0, must be set before calling * fence_signal, indicates that the fence has completed with an error. - * @child_list: list of children fences - * @active_list: list of active fences * * the flags member must be manipulated and read using the appropriate * atomic ops (bit_*), so taking the spinlock will not be needed most -- cgit v1.2.2 From 7175cce1c3f1d8c8840d2004f78f96a3904249b5 Mon Sep 17 00:00:00 2001 From: Vignesh R Date: Wed, 17 Aug 2016 17:43:01 +0530 Subject: iio: adc: ti_am335x_adc: Increase timeout value waiting for ADC sample Now that open delay and sample delay for each channel is configurable via DT, the default IDLE_TIMEOUT value is not enough as this is calculated based on hardcoded macros. This results in driver returning EBUSY sometimes. Fix this by increasing the timeout value based on maximum value possible to open delay and sample delays for each channel. Fixes: 5dc11e810676e ("iio: adc: ti_am335x_adc: make sample delay, open delay, averaging DT parameters") Signed-off-by: Vignesh R Acked-by: Lee Jones Cc: Signed-off-by: Jonathan Cameron --- include/linux/mfd/ti_am335x_tscadc.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h index 2567a87872b0..7f55b8b41032 100644 --- a/include/linux/mfd/ti_am335x_tscadc.h +++ b/include/linux/mfd/ti_am335x_tscadc.h @@ -138,16 +138,16 @@ /* * time in us for processing a single channel, calculated as follows: * - * num cycles = open delay + (sample delay + conv time) * averaging + * max num cycles = open delay + (sample delay + conv time) * averaging * - * num cycles: 152 + (1 + 13) * 16 = 376 + * max num cycles: 262143 + (255 + 13) * 16 = 266431 * * clock frequency: 26MHz / 8 = 3.25MHz * clock period: 1 / 3.25MHz = 308ns * - * processing time: 376 * 308ns = 116us + * max processing time: 266431 * 308ns = 83ms(approx) */ -#define IDLE_TIMEOUT 116 /* microsec */ +#define IDLE_TIMEOUT 83 /* milliseconds */ #define TSCADC_CELLS 2 -- cgit v1.2.2 From 87904c3e82319cf2bad8d656d79c5030dab9490e Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Aug 2016 16:00:53 +0200 Subject: drm/tegra: dsi: Enhance runtime power management The MIPI DSI output on Tegra SoCs requires some external logic to calibrate the MIPI pads before a video signal can be transmitted. This MIPI calibration logic requires to be powered on while the MIPI pads are being used, which is currently done as part of the DSI driver's probe implementation. This is suboptimal because it will leave the MIPI calibration logic powered up even if the DSI output is never used. On Tegra114 and earlier this behaviour also causes the driver to hang while trying to power up the MIPI calibration logic because the power partition that contains the MIPI calibration logic will be powered on by the display controller at output pipeline configuration time. Thus the power up sequence for the MIPI calibration logic happens before it's power partition is guaranteed to be enabled. Fix this by splitting up the API into a request/free pair of functions that manage the runtime dependency between the DSI and the calibration modules (no registers are accessed) and a set of enable, calibrate and disable functions that program the MIPI calibration logic at points in time where the power partition is really enabled. While at it, make sure that the runtime power management also works in ganged mode, which is currently also broken. Reported-by: Jonathan Hunter Tested-by: Jonathan Hunter Signed-off-by: Thierry Reding --- include/linux/host1x.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/host1x.h b/include/linux/host1x.h index d2ba7d334039..1ffbf2a8cb99 100644 --- a/include/linux/host1x.h +++ b/include/linux/host1x.h @@ -304,6 +304,8 @@ struct tegra_mipi_device; struct tegra_mipi_device *tegra_mipi_request(struct device *device); void tegra_mipi_free(struct tegra_mipi_device *device); +int tegra_mipi_enable(struct tegra_mipi_device *device); +int tegra_mipi_disable(struct tegra_mipi_device *device); int tegra_mipi_calibrate(struct tegra_mipi_device *device); #endif -- cgit v1.2.2 From 101b29a204f87c99377faa53bd378f101ebb1824 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 25 Aug 2016 15:16:45 -0700 Subject: byteswap: don't use __builtin_bswap*() with sparse Although sparse declares __builtin_bswap*(), it can't actually do constant folding inside them (yet). As such, things like switch (protocol) { case htons(ETH_P_IP): break; } which we do all over the place cause sparse to warn that it expects a constant instead of a function call. Disable __HAVE_BUILTIN_BSWAP*__ if __CHECKER__ is defined to avoid this. Fixes: 7322dd755e7d ("byteswap: try to avoid __builtin_constant_p gcc bug") Link: http://lkml.kernel.org/r/1470914102-26389-1-git-send-email-johannes@sipsolutions.net Signed-off-by: Johannes Berg Acked-by: Arnd Bergmann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/compiler-gcc.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index e2949397c19b..8dbc8929a6a0 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -242,7 +242,11 @@ */ #define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0) -#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP +/* + * sparse (__CHECKER__) pretends to be gcc, but can't do constant + * folding in __builtin_bswap*() (yet), so don't set these for it. + */ +#if defined(CONFIG_ARCH_USE_BUILTIN_BSWAP) && !defined(__CHECKER__) #if GCC_VERSION >= 40400 #define __HAVE_BUILTIN_BSWAP32__ #define __HAVE_BUILTIN_BSWAP64__ @@ -250,7 +254,7 @@ #if GCC_VERSION >= 40800 #define __HAVE_BUILTIN_BSWAP16__ #endif -#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */ +#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP && !__CHECKER__ */ #if GCC_VERSION >= 50000 #define KASAN_ABI_VERSION 4 -- cgit v1.2.2 From e7d316a02f683864a12389f8808570e37fb90aa3 Mon Sep 17 00:00:00 2001 From: Subash Abhinov Kasiviswanathan Date: Thu, 25 Aug 2016 15:16:51 -0700 Subject: sysctl: handle error writing UINT_MAX to u32 fields We have scripts which write to certain fields on 3.18 kernels but this seems to be failing on 4.4 kernels. An entry which we write to here is xfrm_aevent_rseqth which is u32. echo 4294967295 > /proc/sys/net/core/xfrm_aevent_rseqth Commit 230633d109e3 ("kernel/sysctl.c: detect overflows when converting to int") prevented writing to sysctl entries when integer overflow occurs. However, this does not apply to unsigned integers. Heinrich suggested that we introduce a new option to handle 64 bit limits and set min as 0 and max as UINT_MAX. This might not work as it leads to issues similar to __do_proc_doulongvec_minmax. Alternatively, we would need to change the datatype of the entry to 64 bit. static int __do_proc_doulongvec_minmax(void *data, struct ctl_table { i = (unsigned long *) data; //This cast is causing to read beyond the size of data (u32) vleft = table->maxlen / sizeof(unsigned long); //vleft is 0 because maxlen is sizeof(u32) which is lesser than sizeof(unsigned long) on x86_64. Introduce a new proc handler proc_douintvec. Individual proc entries will need to be updated to use the new handler. [akpm@linux-foundation.org: coding-style fixes] Fixes: 230633d109e3 ("kernel/sysctl.c:detect overflows when converting to int") Link: http://lkml.kernel.org/r/1471479806-5252-1-git-send-email-subashab@codeaurora.org Signed-off-by: Subash Abhinov Kasiviswanathan Cc: Heinrich Schuchardt Cc: Kees Cook Cc: "David S. Miller" Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sysctl.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h index 697e160c78d0..a4f7203a9017 100644 --- a/include/linux/sysctl.h +++ b/include/linux/sysctl.h @@ -42,6 +42,8 @@ extern int proc_dostring(struct ctl_table *, int, void __user *, size_t *, loff_t *); extern int proc_dointvec(struct ctl_table *, int, void __user *, size_t *, loff_t *); +extern int proc_douintvec(struct ctl_table *, int, + void __user *, size_t *, loff_t *); extern int proc_dointvec_minmax(struct ctl_table *, int, void __user *, size_t *, loff_t *); extern int proc_dointvec_jiffies(struct ctl_table *, int, -- cgit v1.2.2 From 17de0a9ff3df8f54f2f47746d118112d4e61d973 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 29 Aug 2016 11:33:58 +1000 Subject: iomap: don't set FIEMAP_EXTENT_MERGED for extent based filesystems Filesystems like XFS that use extents should not set the FIEMAP_EXTENT_MERGED flag in the fiemap extent structures. To allow for both behaviors for the upcoming gfs2 usage split the iomap type field into type and flags, and only set FIEMAP_EXTENT_MERGED if the IOMAP_F_MERGED flag is set. The flags field will also come in handy for future features such as shared extents on reflink-enabled file systems. Reported-by: Andreas Gruenbacher Signed-off-by: Christoph Hellwig Acked-by: Darrick J. Wong Signed-off-by: Dave Chinner --- include/linux/iomap.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/iomap.h b/include/linux/iomap.h index 3267df461012..3d70ece10313 100644 --- a/include/linux/iomap.h +++ b/include/linux/iomap.h @@ -18,6 +18,11 @@ struct vm_fault; #define IOMAP_MAPPED 0x03 /* blocks allocated @blkno */ #define IOMAP_UNWRITTEN 0x04 /* blocks allocated @blkno in unwritten state */ +/* + * Flags for iomap mappings: + */ +#define IOMAP_F_MERGED 0x01 /* contains multiple blocks/extents */ + /* * Magic value for blkno: */ @@ -27,7 +32,8 @@ struct iomap { sector_t blkno; /* 1st sector of mapping, 512b units */ loff_t offset; /* file offset of mapping, bytes */ u64 length; /* length of mapping, bytes */ - int type; /* type of mapping */ + u16 type; /* type of mapping */ + u16 flags; /* flags for mapping */ struct block_device *bdev; /* block device for I/O */ }; -- cgit v1.2.2 From 2fb04fdf30192ff1e2b5834e9b7745889ea8bbcb Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 27 Aug 2016 17:33:03 +0100 Subject: net: smc91x: fix SMC accesses Commit b70661c70830 ("net: smc91x: use run-time configuration on all ARM machines") broke some ARM platforms through several mistakes. Firstly, the access size must correspond to the following rule: (a) at least one of 16-bit or 8-bit access size must be supported (b) 32-bit accesses are optional, and may be enabled in addition to the above. Secondly, it provides no emulation of 16-bit accesses, instead blindly making 16-bit accesses even when the platform specifies that only 8-bit is supported. Reorganise smc91x.h so we can make use of the existing 16-bit access emulation already provided - if 16-bit accesses are supported, use 16-bit accesses directly, otherwise if 8-bit accesses are supported, use the provided 16-bit access emulation. If neither, BUG(). This exactly reflects the driver behaviour prior to the commit being fixed. Since the conversion incorrectly cut down the available access sizes on several platforms, we also need to go through every platform and fix up the overly-restrictive access size: Arnd assumed that if a platform can perform 32-bit, 16-bit and 8-bit accesses, then only a 32-bit access size needed to be specified - not so, all available access sizes must be specified. This likely fixes some performance regressions in doing this: if a platform does not support 8-bit accesses, 8-bit accesses have been emulated by performing a 16-bit read-modify-write access. Tested on the Intel Assabet/Neponset platform, which supports only 8-bit accesses, which was broken by the original commit. Fixes: b70661c70830 ("net: smc91x: use run-time configuration on all ARM machines") Signed-off-by: Russell King Tested-by: Robert Jarzmik Signed-off-by: David S. Miller --- include/linux/smc91x.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/smc91x.h b/include/linux/smc91x.h index 76199b75d584..e302c447e057 100644 --- a/include/linux/smc91x.h +++ b/include/linux/smc91x.h @@ -1,6 +1,16 @@ #ifndef __SMC91X_H__ #define __SMC91X_H__ +/* + * These bits define which access sizes a platform can support, rather + * than the maximal access size. So, if your platform can do 16-bit + * and 32-bit accesses to the SMC91x device, but not 8-bit, set both + * SMC91X_USE_16BIT and SMC91X_USE_32BIT. + * + * The SMC91x driver requires at least one of SMC91X_USE_8BIT or + * SMC91X_USE_16BIT to be supported - just setting SMC91X_USE_32BIT is + * an invalid configuration. + */ #define SMC91X_USE_8BIT (1 << 0) #define SMC91X_USE_16BIT (1 << 1) #define SMC91X_USE_32BIT (1 << 2) -- cgit v1.2.2 From 0d025d271e55f3de21f0aaaf54b42d20404d2b23 Mon Sep 17 00:00:00 2001 From: Josh Poimboeuf Date: Tue, 30 Aug 2016 08:04:16 -0500 Subject: mm/usercopy: get rid of CONFIG_DEBUG_STRICT_USER_COPY_CHECKS There are three usercopy warnings which are currently being silenced for gcc 4.6 and newer: 1) "copy_from_user() buffer size is too small" compile warning/error This is a static warning which happens when object size and copy size are both const, and copy size > object size. I didn't see any false positives for this one. So the function warning attribute seems to be working fine here. Note this scenario is always a bug and so I think it should be changed to *always* be an error, regardless of CONFIG_DEBUG_STRICT_USER_COPY_CHECKS. 2) "copy_from_user() buffer size is not provably correct" compile warning This is another static warning which happens when I enable __compiletime_object_size() for new compilers (and CONFIG_DEBUG_STRICT_USER_COPY_CHECKS). It happens when object size is const, but copy size is *not*. In this case there's no way to compare the two at build time, so it gives the warning. (Note the warning is a byproduct of the fact that gcc has no way of knowing whether the overflow function will be called, so the call isn't dead code and the warning attribute is activated.) So this warning seems to only indicate "this is an unusual pattern, maybe you should check it out" rather than "this is a bug". I get 102(!) of these warnings with allyesconfig and the __compiletime_object_size() gcc check removed. I don't know if there are any real bugs hiding in there, but from looking at a small sample, I didn't see any. According to Kees, it does sometimes find real bugs. But the false positive rate seems high. 3) "Buffer overflow detected" runtime warning This is a runtime warning where object size is const, and copy size > object size. All three warnings (both static and runtime) were completely disabled for gcc 4.6 with the following commit: 2fb0815c9ee6 ("gcc4: disable __compiletime_object_size for GCC 4.6+") That commit mistakenly assumed that the false positives were caused by a gcc bug in __compiletime_object_size(). But in fact, __compiletime_object_size() seems to be working fine. The false positives were instead triggered by #2 above. (Though I don't have an explanation for why the warnings supposedly only started showing up in gcc 4.6.) So remove warning #2 to get rid of all the false positives, and re-enable warnings #1 and #3 by reverting the above commit. Furthermore, since #1 is a real bug which is detected at compile time, upgrade it to always be an error. Having done all that, CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is no longer needed. Signed-off-by: Josh Poimboeuf Cc: Kees Cook Cc: Thomas Gleixner Cc: Ingo Molnar Cc: "H . Peter Anvin" Cc: Andy Lutomirski Cc: Steven Rostedt Cc: Brian Gerst Cc: Peter Zijlstra Cc: Frederic Weisbecker Cc: Byungchul Park Cc: Nilay Vaish Signed-off-by: Linus Torvalds --- include/linux/compiler-gcc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index 8dbc8929a6a0..573c5a18908f 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -158,7 +158,7 @@ #define __compiler_offsetof(a, b) \ __builtin_offsetof(a, b) -#if GCC_VERSION >= 40100 && GCC_VERSION < 40600 +#if GCC_VERSION >= 40100 # define __compiletime_object_size(obj) __builtin_object_size(obj, 0) #endif -- cgit v1.2.2 From 5db4f7f80d165fc9725f356e99feec409e446baa Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 16 Aug 2016 15:06:54 +0300 Subject: Revert "tty/serial/8250: use mctrl_gpio helpers" Serial console is broken in v4.8-rcX. Mika and I independently bisected down to commit 4ef03d328769 ("tty/serial/8250: use mctrl_gpio helpers"). Since neither author nor anyone else didn't propose a solution we better revert it for now. This reverts commit 4ef03d328769eddbfeca1f1c958fdb181a69c341. Link: https://lkml.kernel.org/r/20160809130229.GN1729@lahna.fi.intel.com Signed-off-by: Andy Shevchenko Tested-by: Heikki Krogerus Tested-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_8250.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index 923266cd294a..48ec7651989b 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -111,7 +111,6 @@ struct uart_8250_port { * if no_console_suspend */ unsigned char probe; - struct mctrl_gpios *gpios; #define UART_PROBE_RSA (1 << 0) /* -- cgit v1.2.2 From cd81a9170e69e018bbaba547c1fd85a585f5697a Mon Sep 17 00:00:00 2001 From: Mateusz Guzik Date: Tue, 23 Aug 2016 16:20:38 +0200 Subject: mm: introduce get_task_exe_file For more convenient access if one has a pointer to the task. As a minor nit take advantage of the fact that only task lock + rcu are needed to safely grab ->exe_file. This saves mm refcount dance. Use the helper in proc_exe_link. Signed-off-by: Mateusz Guzik Acked-by: Konstantin Khlebnikov Acked-by: Richard Guy Briggs Cc: # 4.3.x Signed-off-by: Paul Moore --- include/linux/mm.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index 8f468e0d2534..004c73a988b7 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1987,6 +1987,7 @@ extern void mm_drop_all_locks(struct mm_struct *mm); extern void set_mm_exe_file(struct mm_struct *mm, struct file *new_exe_file); extern struct file *get_mm_exe_file(struct mm_struct *mm); +extern struct file *get_task_exe_file(struct task_struct *task); extern bool may_expand_vm(struct mm_struct *, vm_flags_t, unsigned long npages); extern void vm_stat_account(struct mm_struct *, vm_flags_t, long npages); -- cgit v1.2.2 From 2a3a2a3f35249412e35fbb48b743348c40373409 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Thu, 1 Sep 2016 11:11:59 +0200 Subject: ovl: don't cache acl on overlay layer Some operations (setxattr/chmod) can make the cached acl stale. We either need to clear overlay's acl cache for the affected inode or prevent acl caching on the overlay altogether. Preventing caching has the following advantages: - no double caching, less memory used - overlay cache doesn't go stale when fs clears it's own cache Possible disadvantage is performance loss. If that becomes a problem get_acl() can be optimized for overlayfs. This patch disables caching by pre setting i_*acl to a value that - has bit 0 set, so is_uncached_acl() will return true - is not equal to ACL_NOT_CACHED, so get_acl() will not overwrite it The constant -3 was chosen for this purpose. Fixes: 39a25b2b3762 ("ovl: define ->get_acl() for overlay inodes") Signed-off-by: Miklos Szeredi --- include/linux/fs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 3523bf62f328..901e25d495cc 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -574,6 +574,7 @@ static inline void mapping_allow_writable(struct address_space *mapping) struct posix_acl; #define ACL_NOT_CACHED ((void *)(-1)) +#define ACL_DONT_CACHE ((void *)(-3)) static inline struct posix_acl * uncached_acl_sentinel(struct task_struct *task) -- cgit v1.2.2 From 6aa303defb7454a2520c4ddcdf6b081f62a15890 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Thu, 1 Sep 2016 16:14:55 -0700 Subject: mm, vmscan: only allocate and reclaim from zones with pages managed by the buddy allocator Firmware Assisted Dump (FA_DUMP) on ppc64 reserves substantial amounts of memory when booting a secondary kernel. Srikar Dronamraju reported that multiple nodes may have no memory managed by the buddy allocator but still return true for populated_zone(). Commit 1d82de618ddd ("mm, vmscan: make kswapd reclaim in terms of nodes") was reported to cause kswapd to spin at 100% CPU usage when fadump was enabled. The old code happened to deal with the situation of a populated node with zero free pages by co-incidence but the current code tries to reclaim populated zones without realising that is impossible. We cannot just convert populated_zone() as many existing users really need to check for present_pages. This patch introduces a managed_zone() helper and uses it in the few cases where it is critical that the check is made for managed pages -- zonelist construction and page reclaim. Link: http://lkml.kernel.org/r/20160831195104.GB8119@techsingularity.net Signed-off-by: Mel Gorman Reported-by: Srikar Dronamraju Tested-by: Srikar Dronamraju Acked-by: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmzone.h | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index d572b78b65e1..7f2ae99e5daf 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -828,9 +828,21 @@ unsigned long __init node_memmap_size_bytes(int, unsigned long, unsigned long); */ #define zone_idx(zone) ((zone) - (zone)->zone_pgdat->node_zones) -static inline int populated_zone(struct zone *zone) +/* + * Returns true if a zone has pages managed by the buddy allocator. + * All the reclaim decisions have to use this function rather than + * populated_zone(). If the whole zone is reserved then we can easily + * end up with populated_zone() && !managed_zone(). + */ +static inline bool managed_zone(struct zone *zone) +{ + return zone->managed_pages; +} + +/* Returns true if a zone has memory */ +static inline bool populated_zone(struct zone *zone) { - return (!!zone->present_pages); + return zone->present_pages; } extern int movable_zone; -- cgit v1.2.2 From 7e932159901183283cd82d797bc9a7c681e48e9c Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 1 Sep 2016 16:15:01 -0700 Subject: treewide: remove references to the now unnecessary DEFINE_PCI_DEVICE_TABLE It's been eliminated from the sources, remove it from everywhere else. Link: http://lkml.kernel.org/r/076eff466fd7edb550c25c8b25d76924ca0eba62.1472660229.git.joe@perches.com Signed-off-by: Joe Perches Cc: "James E.J. Bottomley" Cc: "Martin K. Petersen" Cc: Bjorn Helgaas Cc: Andy Whitcroft Cc: Jonathan Corbet Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/pci.h | 9 --------- 1 file changed, 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index fbc1fa625c3e..0ab835965669 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -682,15 +682,6 @@ struct pci_driver { #define to_pci_driver(drv) container_of(drv, struct pci_driver, driver) -/** - * DEFINE_PCI_DEVICE_TABLE - macro used to describe a pci device table - * @_table: device table name - * - * This macro is deprecated and should not be used in new code. - */ -#define DEFINE_PCI_DEVICE_TABLE(_table) \ - const struct pci_device_id _table[] - /** * PCI_DEVICE - macro used to describe a specific pci device * @vend: the 16 bit PCI Vendor ID -- cgit v1.2.2 From c11600e4fed67ae4cd6a8096936afd445410e8ed Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Thu, 1 Sep 2016 16:15:07 -0700 Subject: mm, mempolicy: task->mempolicy must be NULL before dropping final reference KASAN allocates memory from the page allocator as part of kmem_cache_free(), and that can reference current->mempolicy through any number of allocation functions. It needs to be NULL'd out before the final reference is dropped to prevent a use-after-free bug: BUG: KASAN: use-after-free in alloc_pages_current+0x363/0x370 at addr ffff88010b48102c CPU: 0 PID: 15425 Comm: trinity-c2 Not tainted 4.8.0-rc2+ #140 ... Call Trace: dump_stack kasan_object_err kasan_report_error __asan_report_load2_noabort alloc_pages_current <-- use after free depot_save_stack save_stack kasan_slab_free kmem_cache_free __mpol_put <-- free do_exit This patch sets current->mempolicy to NULL before dropping the final reference. Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1608301442180.63329@chino.kir.corp.google.com Fixes: cd11016e5f52 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") Signed-off-by: David Rientjes Reported-by: Vegard Nossum Acked-by: Andrey Ryabinin Cc: Alexander Potapenko Cc: Dmitry Vyukov Cc: [4.6+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mempolicy.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h index 4429d255c8ab..5e5b2969d931 100644 --- a/include/linux/mempolicy.h +++ b/include/linux/mempolicy.h @@ -195,6 +195,7 @@ static inline bool vma_migratable(struct vm_area_struct *vma) } extern int mpol_misplaced(struct page *, struct vm_area_struct *, unsigned long); +extern void mpol_put_task_policy(struct task_struct *); #else @@ -297,5 +298,8 @@ static inline int mpol_misplaced(struct page *page, struct vm_area_struct *vma, return -1; /* no node preference */ } +static inline void mpol_put_task_policy(struct task_struct *task) +{ +} #endif /* CONFIG_NUMA */ #endif -- cgit v1.2.2 From 3feab13c919f99b0a17d0ca22ae00cf90f5d3fd1 Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Tue, 16 Aug 2016 16:59:52 +0100 Subject: ACPI / drivers: fix typo in ACPI_DECLARE_PROBE_ENTRY macro When the ACPI_DECLARE_PROBE_ENTRY macro was added in commit e647b532275b ("ACPI: Add early device probing infrastructure"), a stub macro adding an unused entry was added for the !CONFIG_ACPI Kconfig option case to make sure kernel code making use of the macro did not require to be guarded within CONFIG_ACPI in order to be compiled. The stub macro was never used since all kernel code that defines ACPI_DECLARE_PROBE_ENTRY entries is currently guarded within CONFIG_ACPI; it contains a typo that should be nonetheless fixed. Fix the typo in the stub (ie !CONFIG_ACPI) ACPI_DECLARE_PROBE_ENTRY() macro so that it can actually be used if needed. Signed-off-by: Lorenzo Pieralisi Fixes: e647b532275b (ACPI: Add early device probing infrastructure) Cc: 4.4+ # 4.4+ Signed-off-by: Rafael J. Wysocki --- include/linux/acpi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 4d8452c2384b..c5eaf2f80a4c 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -1056,7 +1056,7 @@ static inline struct fwnode_handle *acpi_get_next_subnode(struct device *dev, return NULL; } -#define ACPI_DECLARE_PROBE_ENTRY(table, name, table_id, subtable, validate, data, fn) \ +#define ACPI_DECLARE_PROBE_ENTRY(table, name, table_id, subtable, valid, data, fn) \ static const void * __acpi_table_##name[] \ __attribute__((unused)) \ = { (void *) table_id, \ -- cgit v1.2.2