From 9d5b5ed796d7afd7e8d2ac4b4fb77c6a49463f4b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Petr=20=C5=A0tetiar?= Date: Tue, 3 Nov 2015 11:25:28 +0100 Subject: USB: qcserial: Add support for Quectel EC20 Mini PCIe module MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It seems like this device has same vendor and product IDs as G2K devices, but it has different number of interfaces(4 vs 5) and also different interface layout which makes it currently unusable: usbcore: registered new interface driver qcserial usbserial: USB Serial support registered for Qualcomm USB modem usb 2-1.2: unknown number of interfaces: 5 lsusb output: Bus 002 Device 003: ID 05c6:9215 Qualcomm, Inc. Acer Gobi 2000 Wireless Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x05c6 Qualcomm, Inc. idProduct 0x9215 Acer Gobi 2000 Wireless Modem bcdDevice 2.32 iManufacturer 1 Quectel iProduct 2 Quectel LTE Module iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 209 bNumInterfaces 5 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 500mA Signed-off-by: Petr Štetiar Cc: stable [johan: rename define and add comment ] Signed-off-by: Johan Hovold --- drivers/usb/serial/qcserial.c | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) (limited to 'drivers/usb/serial/qcserial.c') diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 5022fcfa0260..0e46af0d0cb4 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -22,6 +22,8 @@ #define DRIVER_AUTHOR "Qualcomm Inc" #define DRIVER_DESC "Qualcomm USB Serial driver" +#define QUECTEL_EC20_PID 0x9215 + /* standard device layouts supported by this driver */ enum qcserial_layouts { QCSERIAL_G2K = 0, /* Gobi 2000 */ @@ -171,6 +173,38 @@ static const struct usb_device_id id_table[] = { }; MODULE_DEVICE_TABLE(usb, id_table); +static int handle_quectel_ec20(struct device *dev, int ifnum) +{ + int altsetting = 0; + + /* + * Quectel EC20 Mini PCIe LTE module layout: + * 0: DM/DIAG (use libqcdm from ModemManager for communication) + * 1: NMEA + * 2: AT-capable modem port + * 3: Modem interface + * 4: NDIS + */ + switch (ifnum) { + case 0: + dev_dbg(dev, "Quectel EC20 DM/DIAG interface found\n"); + break; + case 1: + dev_dbg(dev, "Quectel EC20 NMEA GPS interface found\n"); + break; + case 2: + case 3: + dev_dbg(dev, "Quectel EC20 Modem port found\n"); + break; + case 4: + /* Don't claim the QMI/net interface */ + altsetting = -1; + break; + } + + return altsetting; +} + static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) { struct usb_host_interface *intf = serial->interface->cur_altsetting; @@ -240,6 +274,12 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) altsetting = -1; break; case QCSERIAL_G2K: + /* handle non-standard layouts */ + if (nintf == 5 && id->idProduct == QUECTEL_EC20_PID) { + altsetting = handle_quectel_ec20(dev, ifnum); + goto done; + } + /* * Gobi 2K+ USB layout: * 0: QMI/net -- cgit v1.2.2 From 59536da34513c594af2a6fd35ba65ea45b6960a1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Mon, 16 Nov 2015 13:15:46 +0100 Subject: USB: qcserial: Fix support for HP lt4112 LTE/HSPA+ Gobi 4G Modem MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The DEVICE_HWI type was added under the faulty assumption that Huawei devices based on Qualcomm chipsets and firmware use the static USB interface numbering known from Gobi devices. But this model does not apply to Huawei devices like the HP branded lt4112 (Huawei me906e). Huawei firmwares will dynamically assign interface numbers. Functions are renumbered when the firmware is reconfigured. Fix by changing the DEVICE_HWI type to use a simplified version of Huawei's subclass + protocol scheme: Blacklisting known network interface combinations and assuming the rest are serial. Reported-and-tested-by: Muri Nicanor Tested-by: Martin Hauke Cc: Fixes: e7181d005e84 ("USB: qcserial: Add support for HP lt4112 LTE/HSPA+ Gobi 4G Modem") Signed-off-by: Bjørn Mork Signed-off-by: Johan Hovold --- drivers/usb/serial/qcserial.c | 54 +++++++++++++++++++++++++++---------------- 1 file changed, 34 insertions(+), 20 deletions(-) (limited to 'drivers/usb/serial/qcserial.c') diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 0e46af0d0cb4..9919d2a9faf2 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -215,6 +215,10 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) int altsetting = -1; bool sendsetup = false; + /* we only support vendor specific functions */ + if (intf->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC) + goto done; + nintf = serial->dev->actconfig->desc.bNumInterfaces; dev_dbg(dev, "Num Interfaces = %d\n", nintf); ifnum = intf->desc.bInterfaceNumber; @@ -341,29 +345,39 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) break; case QCSERIAL_HWI: /* - * Huawei layout: - * 0: AT-capable modem port - * 1: DM/DIAG - * 2: AT-capable modem port - * 3: CCID-compatible PCSC interface - * 4: QMI/net - * 5: NMEA + * Huawei devices map functions by subclass + protocol + * instead of interface numbers. The protocol identify + * a specific function, while the subclass indicate a + * specific firmware source + * + * This is a blacklist of functions known to be + * non-serial. The rest are assumed to be serial and + * will be handled by this driver */ - switch (ifnum) { - case 0: - case 2: - dev_dbg(dev, "Modem port found\n"); - break; - case 1: - dev_dbg(dev, "DM/DIAG interface found\n"); - break; - case 5: - dev_dbg(dev, "NMEA GPS interface found\n"); - break; - default: - /* don't claim any unsupported interface */ + switch (intf->desc.bInterfaceProtocol) { + /* QMI combined (qmi_wwan) */ + case 0x07: + case 0x37: + case 0x67: + /* QMI data (qmi_wwan) */ + case 0x08: + case 0x38: + case 0x68: + /* QMI control (qmi_wwan) */ + case 0x09: + case 0x39: + case 0x69: + /* NCM like (huawei_cdc_ncm) */ + case 0x16: + case 0x46: + case 0x76: altsetting = -1; break; + default: + dev_dbg(dev, "Huawei type serial port found (%02x/%02x/%02x)\n", + intf->desc.bInterfaceClass, + intf->desc.bInterfaceSubClass, + intf->desc.bInterfaceProtocol); } break; default: -- cgit v1.2.2