aboutsummaryrefslogtreecommitdiffstats
path: root/tools/lib
Commit message (Collapse)AuthorAge
...
| * | | libbpf: optimize barrier for XDP socket ringsMagnus Karlsson2019-04-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The full memory barrier in the XDP socket rings on the consumer side between the load of the data and the store of the consumer ring is there to protect the store from being executed before the load of the data. If this was allowed to happen, the producer might overwrite the data field with a new entry before the consumer got the chance to read it. On x86, stores are guaranteed not to be reordered with older loads, so it does not need a full memory barrier here. A compile time barrier would be enough. This patch introdcues a new primitive in libbpf_util.h that implements a new barrier type (libbpf_smp_rwmb) hindering stores to be reordered with older loads. It is then used in the XDP socket ring access code in libbpf to improve performance. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
| * | | libbpf: remove dependency on barrier.h in xsk.hMagnus Karlsson2019-04-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The use of smp_rmb() and smp_wmb() creates a Linux header dependency on barrier.h that is unnecessary in most parts. This patch implements the two small defines that are needed from barrier.h. As a bonus, the new implementations are faster than the default ones as they default to sfence and lfence for x86, while we only need a compiler barrier in our case. Just as it is when the same ring access code is compiled in the kernel. Fixes: 1cad07884239 ("libbpf: add support for using AF_XDP sockets") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
| * | | libbpf: remove likely/unlikely in xsk.hMagnus Karlsson2019-04-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the use of likely and unlikely in xsk.h since they create a dependency on Linux headers as reported by several users. There have also been reports that the use of these decreases performance as the compiler puts the code on two different cache lines instead of on a single one. All in all, I think we are better off without them. Fixes: 1cad07884239 ("libbpf: add support for using AF_XDP sockets") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
| * | | libbpf: fix XDP socket ring buffer memory orderingMagnus Karlsson2019-04-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ring buffer code of XDP sockets is missing a memory barrier on the consumer side between the load of the data and the write that signals that it is ok for the producer to put new data into the buffer. On architectures that does not guarantee that stores are not reordered with older loads, the producer might put data into the ring before the consumer had the chance to read it. As IA does guarantee this ordering, it would only need a compiler barrier here, but there are no primitives in barrier.h for this specific case (hinder writes to be ordered before older reads) so I had to add a smp_mb() here which will translate into a run-time synch operation on IA. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
| * | | libbpf: fix printf formatter for ptrdiff_t argumentAndrii Nakryiko2019-04-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using %ld for printing out value of ptrdiff_t type is not portable between 32-bit and 64-bit archs. This is causing compilation errors for libbpf on 32-bit platform (discovered as part of an effort to integrate libbpf into systemd ([0])). Proper formatter is %td, which is used in this patch. v2->v1: - add Reported-by - provide more context on how this issue was discovered [0] https://github.com/systemd/systemd/pull/12151 Reported-by: Evgeny Vereshchagin <evvers@ya.ru> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@fb.com> Cc: Yonghong Song <yhs@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
| * | | btf: add support for VAR and DATASEC in btf_dedup()Andrii Nakryiko2019-04-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for VAR and DATASEC in btf_dedup(). VAR/DATASEC are never deduplicated, but they need to be processed anyway as types they refer to might need to be remapped due to deduplication and compaction. Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Yonghong Song <yhs@fb.com> Cc: Alexei Starovoitov <ast@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| * | | libbpf: Support sysctl hookAndrey Ignatov2019-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support BPF_PROG_TYPE_CGROUP_SYSCTL program in libbpf: identifying program and attach types by section name, probe. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
| * | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller2019-04-11
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Daniel Borkmann says: ==================== pull-request: bpf-next 2019-04-12 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Improve BPF verifier scalability for large programs through two optimizations: i) remove verifier states that are not useful in pruning, ii) stop walking parentage chain once first LIVE_READ is seen. Combined gives approx 20x speedup. Increase limits for accepting large programs under root, and add various stress tests, from Alexei. 2) Implement global data support in BPF. This enables static global variables for .data, .rodata and .bss sections to be properly handled which allows for more natural program development. This also opens up the possibility to optimize program workflow by compiling ELFs only once and later only rewriting section data before reload, from Daniel and with test cases and libbpf refactoring from Joe. 3) Add config option to generate BTF type info for vmlinux as part of the kernel build process. DWARF debug info is converted via pahole to BTF. Latter relies on libbpf and makes use of BTF deduplication algorithm which results in 100x savings compared to DWARF data. Resulting .BTF section is typically about 2MB in size, from Andrii. 4) Add BPF verifier support for stack access with variable offset from helpers and add various test cases along with it, from Andrey. 5) Extend bpf_skb_adjust_room() growth BPF helper to mark inner MAC header so that L2 encapsulation can be used for tc tunnels, from Alan. 6) Add support for input __sk_buff context in BPF_PROG_TEST_RUN so that users can define a subset of allowed __sk_buff fields that get fed into the test program, from Stanislav. 7) Add bpf fs multi-dimensional array tests for BTF test suite and fix up various UBSAN warnings in bpftool, from Yonghong. 8) Generate a pkg-config file for libbpf, from Luca. 9) Dump program's BTF id in bpftool, from Prashant. 10) libbpf fix to use smaller BPF log buffer size for AF_XDP's XDP program, from Magnus. 11) kallsyms related fixes for the case when symbols are not present in BPF selftests and samples, from Daniel ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | libbpf: add support for ctx_{size, }_{in, out} in BPF_PROG_TEST_RUNStanislav Fomichev2019-04-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support recently introduced input/output context for test runs. We extend only bpf_prog_test_run_xattr. bpf_prog_test_run is unextendable and left as is. Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| | * | | libbpf: Fix build with gcc-8Andrey Ignatov2019-04-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reported in [1]. With gcc 8.3.0 the following error is issued: cc -Ibpf@sta -I. -I.. -I.././include -I.././include/uapi -fdiagnostics-color=always -fsanitize=address,undefined -fno-omit-frame-pointer -pipe -D_FILE_OFFSET_BITS=64 -Wall -Winvalid-pch -Werror -g -fPIC -g -O2 -Werror -Wall -Wno-pointer-arith -Wno-sign-compare -MD -MQ 'bpf@sta/src_libbpf.c.o' -MF 'bpf@sta/src_libbpf.c.o.d' -o 'bpf@sta/src_libbpf.c.o' -c ../src/libbpf.c ../src/libbpf.c: In function 'bpf_object__elf_collect': ../src/libbpf.c:947:18: error: 'map_def_sz' may be used uninitialized in this function [-Werror=maybe-uninitialized] if (map_def_sz <= sizeof(struct bpf_map_def)) { ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/libbpf.c:827:18: note: 'map_def_sz' was declared here int i, map_idx, map_def_sz, nr_syms, nr_maps = 0, nr_maps_glob = 0; ^~~~~~~~~~ According to [2] -Wmaybe-uninitialized is enabled by -Wall. Same error is generated by clang's -Wconditional-uninitialized. [1] https://github.com/libbpf/libbpf/pull/29#issuecomment-481902601 [2] https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html Fixes: d859900c4c56 ("bpf, libbpf: support global data/bss/rodata sections") Reported-by: Evgeny Vereshchagin <evvers@ya.ru> Signed-off-by: Andrey Ignatov <rdna@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| | * | | libbpf: fix crash in XDP socket part with new larger BPF_LOG_BUF_SIZEMagnus Karlsson2019-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit da11b417583e ("libbpf: teach libbpf about log_level bit 2"), the BPF_LOG_BUF_SIZE was increased to 16M. The XDP socket part of libbpf allocated the log_buf on the stack, but for the new 16M buffer size this is not going to work. Change the code so it uses a 16K buffer instead. Fixes: da11b417583e ("libbpf: teach libbpf about log_level bit 2") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| | * | | bpf, bpftool: fix a few ubsan warningsYonghong Song2019-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The issue is reported at https://github.com/libbpf/libbpf/issues/28. Basically, per C standard, for void *memcpy(void *dest, const void *src, size_t n) if "dest" or "src" is NULL, regardless of whether "n" is 0 or not, the result of memcpy is undefined. clang ubsan reported three such instances in bpf.c with the following pattern: memcpy(dest, 0, 0). Although in practice, no known compiler will cause issues when copy size is 0. Let us still fix the issue to silence ubsan warnings. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| | * | | bpf, libbpf: add support for BTF Var and DataSecDaniel Borkmann2019-04-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds libbpf support for BTF Var and DataSec kinds. Main point here is that libbpf needs to do some preparatory work before the whole BTF object can be loaded into the kernel, that is, fixing up of DataSec size taken from the ELF section size and non-static variable offset which needs to be taken from the ELF's string section. Upstream LLVM doesn't fix these up since at time of BTF emission it is too early in the compilation process thus this information isn't available yet, hence loader needs to take care of it. Note, deduplication handling has not been in the scope of this work and needs to be addressed in a future commit. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://reviews.llvm.org/D59441 Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
| | * | | bpf, libbpf: support global data/bss/rodata sectionsDaniel Borkmann2019-04-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This work adds BPF loader support for global data sections to libbpf. This allows to write BPF programs in more natural C-like way by being able to define global variables and const data. Back at LPC 2018 [0] we presented a first prototype which implemented support for global data sections by extending BPF syscall where union bpf_attr would get additional memory/size pair for each section passed during prog load in order to later add this base address into the ldimm64 instruction along with the user provided offset when accessing a variable. Consensus from LPC was that for proper upstream support, it would be more desirable to use maps instead of bpf_attr extension as this would allow for introspection of these sections as well as potential live updates of their content. This work follows this path by taking the following steps from loader side: 1) In bpf_object__elf_collect() step we pick up ".data", ".rodata", and ".bss" section information. 2) If present, in bpf_object__init_internal_map() we add maps to the obj's map array that corresponds to each of the present sections. Given section size and access properties can differ, a single entry array map is created with value size that is corresponding to the ELF section size of .data, .bss or .rodata. These internal maps are integrated into the normal map handling of libbpf such that when user traverses all obj maps, they can be differentiated from user-created ones via bpf_map__is_internal(). In later steps when we actually create these maps in the kernel via bpf_object__create_maps(), then for .data and .rodata sections their content is copied into the map through bpf_map_update_elem(). For .bss this is not necessary since array map is already zero-initialized by default. Additionally, for .rodata the map is frozen as read-only after setup, such that neither from program nor syscall side writes would be possible. 3) In bpf_program__collect_reloc() step, we record the corresponding map, insn index, and relocation type for the global data. 4) And last but not least in the actual relocation step in bpf_program__relocate(), we mark the ldimm64 instruction with src_reg = BPF_PSEUDO_MAP_VALUE where in the first imm field the map's file descriptor is stored as similarly done as in BPF_PSEUDO_MAP_FD, and in the second imm field (as ldimm64 is 2-insn wide) we store the access offset into the section. Given these maps have only single element ldimm64's off remains zero in both parts. 5) On kernel side, this special marked BPF_PSEUDO_MAP_VALUE load will then store the actual target address in order to have a 'map-lookup'-free access. That is, the actual map value base address + offset. The destination register in the verifier will then be marked as PTR_TO_MAP_VALUE, containing the fixed offset as reg->off and backing BPF map as reg->map_ptr. Meaning, it's treated as any other normal map value from verification side, only with efficient, direct value access instead of actual call to map lookup helper as in the typical case. Currently, only support for static global variables has been added, and libbpf rejects non-static global variables from loading. This can be lifted until we have proper semantics for how BPF will treat multi-object BPF loads. From BTF side, libbpf will set the value type id of the types corresponding to the ".bss", ".data" and ".rodata" names which LLVM will emit without the object name prefix. The key type will be left as zero, thus making use of the key-less BTF option in array maps. Simple example dump of program using globals vars in each section: # bpftool prog [...] 6784: sched_cls name load_static_dat tag a7e1291567277844 gpl loaded_at 2019-03-11T15:39:34+0000 uid 0 xlated 1776B jited 993B memlock 4096B map_ids 2238,2237,2235,2236,2239,2240 # bpftool map show id 2237 2237: array name test_glo.bss flags 0x0 key 4B value 64B max_entries 1 memlock 4096B # bpftool map show id 2235 2235: array name test_glo.data flags 0x0 key 4B value 64B max_entries 1 memlock 4096B # bpftool map show id 2236 2236: array name test_glo.rodata flags 0x80 key 4B value 96B max_entries 1 memlock 4096B # bpftool prog dump xlated id 6784 int load_static_data(struct __sk_buff * skb): ; int load_static_data(struct __sk_buff *skb) 0: (b7) r6 = 0 ; test_reloc(number, 0, &num0); 1: (63) *(u32 *)(r10 -4) = r6 2: (bf) r2 = r10 ; int load_static_data(struct __sk_buff *skb) 3: (07) r2 += -4 ; test_reloc(number, 0, &num0); 4: (18) r1 = map[id:2238] 6: (18) r3 = map[id:2237][0]+0 <-- direct addr in .bss area 8: (b7) r4 = 0 9: (85) call array_map_update_elem#100464 10: (b7) r1 = 1 ; test_reloc(number, 1, &num1); [...] ; test_reloc(string, 2, str2); 120: (18) r8 = map[id:2237][0]+16 <-- same here at offset +16 122: (18) r1 = map[id:2239] 124: (18) r3 = map[id:2237][0]+16 126: (b7) r4 = 0 127: (85) call array_map_update_elem#100464 128: (b7) r1 = 120 ; str1[5] = 'x'; 129: (73) *(u8 *)(r9 +5) = r1 ; test_reloc(string, 3, str1); 130: (b7) r1 = 3 131: (63) *(u32 *)(r10 -4) = r1 132: (b7) r9 = 3 133: (bf) r2 = r10 ; int load_static_data(struct __sk_buff *skb) 134: (07) r2 += -4 ; test_reloc(string, 3, str1); 135: (18) r1 = map[id:2239] 137: (18) r3 = map[id:2235][0]+16 <-- direct addr in .data area 139: (b7) r4 = 0 140: (85) call array_map_update_elem#100464 141: (b7) r1 = 111 ; __builtin_memcpy(&str2[2], "hello", sizeof("hello")); 142: (73) *(u8 *)(r8 +6) = r1 <-- further access based on .bss data 143: (b7) r1 = 108 144: (73) *(u8 *)(r8 +5) = r1 [...] For Cilium use-case in particular, this enables migrating configuration constants from Cilium daemon's generated header defines into global data sections such that expensive runtime recompilations with LLVM can be avoided altogether. Instead, the ELF file becomes effectively a "template", meaning, it is compiled only once (!) and the Cilium daemon will then rewrite relevant configuration data from the ELF's .data or .rodata sections directly instead of recompiling the program. The updated ELF is then loaded into the kernel and atomically replaces the existing program in the networking datapath. More info in [0]. Based upon recent fix in LLVM, commit c0db6b6bd444 ("[BPF] Don't fail for static variables"). [0] LPC 2018, BPF track, "ELF relocation for static data in BPF", http://vger.kernel.org/lpc-bpf2018.html#session-3 Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
| | * | | bpf, libbpf: refactor relocation handlingJoe Stringer2019-04-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adjust the code for relocations slightly with no functional changes, so that upcoming patches that will introduce support for relocations into the .data, .rodata and .bss sections can be added independent of these changes. Signed-off-by: Joe Stringer <joe@wand.net.nz> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
| | * | | libbpf: Ignore -Wformat-nonliteral warningAndrey Ignatov2019-04-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | vsprintf() in __base_pr() uses nonliteral format string and it breaks compilation for those who provide corresponding extra CFLAGS, e.g.: https://github.com/libbpf/libbpf/issues/27 If libbpf is built with the flags from PR: libbpf.c:68:26: error: format string is not a string literal [-Werror,-Wformat-nonliteral] return vfprintf(stderr, format, args); ^~~~~~ 1 error generated. Ignore this warning since the use case in libbpf.c is legit. Signed-off-by: Andrey Ignatov <rdna@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
| | * | | libbpf: teach libbpf about log_level bit 2Alexei Starovoitov2019-04-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow bpf_prog_load_xattr() to specify log_level for program loading. Teach libbpf to accept log_level with bit 2 set. Increase default BPF_LOG_BUF_SIZE from 256k to 16M. There is no downside to increase it to a maximum allowed by old kernels. Existing 256k limit caused ENOSPC errors and users were not able to see verifier error which is printed at the end of the verifier log. If ENOSPC is hit, double the verifier log and try again to capture the verifier error. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| | * | | tools/bpf: generate pkg-config file for libbpfLuca Boccassi2019-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Generate a libbpf.pc file at build time so that users can rely on pkg-config to find the library, its CFLAGS and LDFLAGS. Signed-off-by: Luca Boccassi <bluca@debian.org> Acked-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* | | | | Merge branch 'perf-core-for-linus' of ↵Linus Torvalds2019-05-06
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "The main kernel changes were: - add support for Intel's "adaptive PEBS v4" - which embedds LBS data in PEBS records and can thus batch up and reduce the IRQ (NMI) rate significantly - reducing overhead and making call-graph profiling less intrusive. - add Intel CPU core and uncore support updates for Tremont, Icelake, - extend the x86 PMU constraints scheduler with 'constraint ranges' to better support Icelake hw constraints, - make x86 call-chain support work better with CONFIG_FRAME_POINTER=y - misc other changes Tooling changes: - updates to the main tools: 'perf record', 'perf trace', 'perf stat' - updated Intel and S/390 vendor events - libtraceevent updates - misc other updates and fixes" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (69 commits) perf/x86: Make perf callchains work without CONFIG_FRAME_POINTER watchdog: Fix typo in comment perf/x86/intel: Add Tremont core PMU support perf/x86/intel/uncore: Add Intel Icelake uncore support perf/x86/msr: Add Icelake support perf/x86/intel/rapl: Add Icelake support perf/x86/intel/cstate: Add Icelake support perf/x86/intel: Add Icelake support perf/x86: Support constraint ranges perf/x86/lbr: Avoid reading the LBRs when adaptive PEBS handles them perf/x86/intel: Support adaptive PEBS v4 perf/x86/intel/ds: Extract code of event update in short period perf/x86/intel: Extract memory code PEBS parser for reuse perf/x86: Support outputting XMM registers perf/x86/intel: Force resched when TFA sysctl is modified perf/core: Add perf_pmu_resched() as global function perf/headers: Fix stale comment for struct perf_addr_filter perf/core: Make perf_swevent_init_cpu() static perf/x86: Add sanity checks to x86_schedule_events() perf/x86: Optimize x86_schedule_events() ...
| * | | | | Merge branch 'linus' into perf/core, to pick up fixesIngo Molnar2019-04-16
| |\| | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | | | | tools lib traceevent: Rename input arguments and local variables of ↵Tzvetomir Stoyanov2019-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | libtraceevent from pevent to tep "pevent" to "tep" renaming of: - all "pevent" input arguments of libtraceevent internal functions. - all local "pevent" variables of libtraceevent. This makes the implementation consistent with the chosen naming convention, tep (trace event parser), and will avoid any confusion with the old pevent name Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/linux-trace-devel/20190401132111.13727-5-tstoyanov@vmware.com Link: http://lkml.kernel.org/r/20190401164344.944953447@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| * | | | | perf tools, tools lib traceevent: Rename "pevent" member of struct ↵Tzvetomir Stoyanov2019-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tep_event_filter to "tep" The member "pevent" of the struct tep_event_filter is renamed to "tep". This makes the struct consistent with the chosen naming convention: tep (trace event parser), instead of the old pevent. Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/linux-trace-devel/20190401132111.13727-4-tstoyanov@vmware.com Link: http://lkml.kernel.org/r/20190401164344.785896189@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| * | | | | perf tools, tools lib traceevent: Rename "pevent" member of struct tep_event ↵Tzvetomir Stoyanov2019-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | to "tep" The member "pevent" of the struct tep_event is renamed to "tep". This makes the struct consistent with the chosen naming convention: tep (trace event parser), instead of the old pevent. Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/linux-trace-devel/20190401132111.13727-3-tstoyanov@vmware.com Link: http://lkml.kernel.org/r/20190401164344.627724996@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| * | | | | tools lib traceevent: Rename input arguments of libtraceevent APIs from ↵Tzvetomir Stoyanov2019-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pevent to tep Input arguments of libtraceevent APIs are renamed from "struct tep_handle *pevent" to "struct tep_handle *tep". This makes the API consistent with the chosen naming convention: tep (trace event parser), instead of the old pevent. Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/linux-trace-devel/20190401132111.13727-2-tstoyanov@vmware.com Link: http://lkml.kernel.org/r/20190401164344.465573837@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| * | | | | tools tools, tools lib traceevent: Make traceevent APIs more consistentTzvetomir Stoyanov2019-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename some traceevent APIs for consistency: tep_pid_is_registered() to tep_is_pid_registered() tep_file_bigendian() to tep_is_file_bigendian() to make the names and return values consistent with other tep_is_... APIs tep_data_lat_fmt() to tep_data_latency_format() to make the name more descriptive tep_host_bigendian() to tep_is_bigendian() tep_set_host_bigendian() to tep_set_local_bigendian() tep_is_host_bigendian() to tep_is_local_bigendian() "host" can be confused with VMs, and "local" is about the local machine. All tep_is_..._bigendian(struct tep_handle *tep) APIs return the saved data in the tep handle, while tep_is_bigendian() returns the running machine's endianness. All tep_is_... functions are modified to return bool value, instead of int. Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20190327141946.4353-2-tstoyanov@vmware.com Link: http://lkml.kernel.org/r/20190401164344.288624897@goodmis.org [ Removed some extra parenthesis around return statements ] Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| * | | | | tools lib traceevent: Remove call to exit() from tep_filter_add_filter_str()Tzvetomir Stoyanov2019-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes call to exit() from tep_filter_add_filter_str(). A library function should not force the application to exit. In the current implementation tep_filter_add_filter_str() calls exit() when a special "test_filters" mode is set, used only for debugging purposes. When this mode is set and a filter is added - its string is printed to the console and exit() is called. This patch changes the logic - when in "test_filters" mode, the filter string is still printed, but the exit() is not called. It is up to the application to track when "test_filters" mode is set and to call exit, if needed. Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20190326154328.28718-9-tstoyanov@vmware.com Link: http://lkml.kernel.org/r/20190401164344.121717482@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| * | | | | tools lib traceevent: Remove tep filter trivial APIsTzvetomir Stoyanov2019-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes trivial filter tep APIs: enum tep_filter_trivial_type tep_filter_event_has_trivial() tep_update_trivial() tep_filter_clear_trivial() Trivial filters is an optimization, used only in the first version of KernelShark. The API is deprecated, the next KernelShark release does not use it. Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20190326154328.28718-4-tstoyanov@vmware.com Link: http://lkml.kernel.org/r/20190401164343.968458918@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| * | | | | tools lib traceevent: Removed unneeded !! and return parenthesisSteven Rostedt (VMware)2019-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As return is not a function we do not need parenthesis around the return value. Also, a function returning bool does not need to add !!. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: http://lkml.kernel.org/r/20190401164343.817886725@goodmis.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| * | | | | tools lib traceevent: Implement new traceevent APIs for accessing struct ↵Tzvetomir Stoyanov2019-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tep_handler fields As struct tep_handler definition is not exposed as part of libtraceevent API, its fields cannot be accessed directly by the library users. This patch implements new APIs, which can be used to access the struct tep_handler fields: tep_get_event() - retrieves an event pointer at a specific index tep_get_first_event() - is modified to use tep_get_event() tep_clear_flag() - clears a tep handle flag tep_test_flag() - test if a given flag is set tep_get_header_timestamp_size() - returns the size of the timestamp stored in the header. tep_get_cpus() - returns the number of CPUs tep_is_old_format() - returns true if data was created by an older kernel with the old data format tep_set_print_raw() - have the output print in the raw format tep_set_test_filters() - debugging utility for testing tep filters Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/linux-trace-devel/20190325145017.30246-4-tstoyanov@vmware.com Link: http://lkml.kernel.org/r/20190401164343.679629539@goodmis.org [ Renamed some newly added "pevent" to "tep" ] Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| * | | | | tools lib traceevent: Coding style fixesTzvetomir Stoyanov2019-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixed few coding style problems in event-parse-api.c Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/linux-trace-devel/20190325145017.30246-3-tstoyanov@vmware.com Link: http://lkml.kernel.org/r/20190401164343.537086316@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| * | | | | tools lib traceevent: Change description of few APIsTzvetomir Stoyanov2019-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | APIs descriptions should describe the purpose of the function, its parameters and return value. While working on man pages implementation, I noticed mismatches in the descriptions of few APIs. This patch changes the description of these APIs, making them consistent with the man pages: - tep_print_num_field() - tep_print_func_field() - tep_get_header_page_size() - tep_get_long_size() - tep_set_long_size() - tep_get_page_size() - tep_set_page_size() Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/linux-trace-devel/20190325145017.30246-2-tstoyanov@vmware.com Link: http://lkml.kernel.org/r/20190401164343.396759247@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| * | | | | tools lib traceevent: Add more debugging to see various internal ring buffer ↵Steven Rostedt (Red Hat)2019-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | entries When trace-cmd report --debug is set, show the internal ring buffer entries like time-extends and padding. This requires adding new kbuffer API to retrieve these items. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: http://lkml.kernel.org/r/20190401164343.257591565@goodmis.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| * | | | | tools lib traceevent: Implement a new API, tep_list_events_copy()Tzvetomir Stoyanov2019-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Existing API tep_list_events() is not thread safe, it uses the internal array sort_events to keep cache of the sorted events and reuses it. This patch implements a new API, tep_list_events_copy(), which allocates new sorted array each time it is called. It could be used when a sorted events functionality is needed in thread safe use cases. It is up to the caller to free the array. Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/linux-trace-devel/20181218133013.31094-1-tstoyanov@vmware.com Link: http://lkml.kernel.org/r/20190401164343.117437443@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| * | | | | tools lib traceevent: Add mono clocks to be parsed in secondsSteven Rostedt (VMware)2019-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mono clocks can display in seconds instead of whole numbers: trace-cmd-521 [001] 99176715281005: sched_waking: comm=kworker/u16:2 pid=32118 prio=120 target_cpu=002 trace-cmd-521 [001] 99176715286349: sched_wake_idle_without_ipi: cpu=2 trace-cmd-521 [001] 99176715288047: sched_wakeup: kworker/u16:2:32118 [120] success=1 CPU:002 trace-cmd-521 [001] 99176715290022: sched_waking: comm=trace-cmd pid=523 prio=120 target_cpu=000 trace-cmd-521 [001] 99176715292332: sched_wake_idle_without_ipi: cpu=0 trace-cmd-521 [001] 99176715292855: sched_wakeup: trace-cmd:523 [120] success=1 CPU:000 trace-cmd-521 [001] 99176715300697: sched_stat_runtime: comm=trace-cmd pid=521 runtime=80233 [ns] vruntime=66705540554 [ns Break it up in seconds: trace-cmd-521 [001] 99176.715281: sched_waking: comm=kworker/u16:2 pid=32118 prio=120 target_cpu=002 trace-cmd-521 [001] 99176.715286: sched_wake_idle_without_ipi: cpu=2 trace-cmd-521 [001] 99176.715288: sched_wakeup: kworker/u16:2:32118 [120] success=1 CPU:002 trace-cmd-521 [001] 99176.715290: sched_waking: comm=trace-cmd pid=523 prio=120 target_cpu=000 trace-cmd-521 [001] 99176.715292: sched_wake_idle_without_ipi: cpu=0 trace-cmd-521 [001] 99176.715293: sched_wakeup: trace-cmd:523 [120] success=1 CPU:000 trace-cmd-521 [001] 99176.715301: sched_stat_runtime: comm=trace-cmd pid=521 runtime=80233 [ns] vruntime=66705540554 [ns] Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: http://lkml.kernel.org/r/20190401164342.976554023@goodmis.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| * | | | | tools lib traceevent: Handle trace_printk() "%px"Steven Rostedt (VMware)2019-04-01
| | |/ / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With security updates, %p in the kernel is hashed to protect true kernel locations. But trace_printk() is not allowed in production systems, and when a pointer is used, there are many times that the actual address is needed. "%px" produces the real address. But libtraceevent does not know how to handle that extension. Add it. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: http://lkml.kernel.org/r/20190401164342.837312153@goodmis.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* | | | | Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds2019-05-05
|\ \ \ \ \ | |_|_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "I'd like to apologize for this very late pull request: I was dithering through the week whether to send the fixes, and then yesterday Jiri's crash fix for a regression introduced in this cycle clearly marked perf/urgent as 'must merge now'. Most of the commits are tooling fixes, plus there's three kernel fixes via four commits: - race fix in the Intel PEBS code - fix an AUX bug and roll back a previous attempt - fix AMD family 17h generic HW cache-event perf counters The largest diffstat contribution comes from the AMD fix - a new event table is introduced, which is a fairly low risk change but has a large linecount" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Fix race in intel_pmu_disable_event() perf/x86/intel/pt: Remove software double buffering PMU capability perf/ring_buffer: Fix AUX software double buffering perf tools: Remove needless asm/unistd.h include fixing build in some places tools arch uapi: Copy missing unistd.h headers for arc, hexagon and riscv tools build: Add -ldl to the disassembler-four-args feature test perf cs-etm: Always allocate memory for cs_etm_queue::prev_packet perf cs-etm: Don't check cs_etm_queue::prev_packet validity perf report: Report OOM in status line in the GTK UI perf bench numa: Add define for RUSAGE_THREAD if not present tools lib traceevent: Change tag string for error perf annotate: Fix build on 32 bit for BPF annotation tools uapi x86: Sync vmx.h with the kernel perf bpf: Return value with unlocking in perf_env__find_btf() MAINTAINERS: Include vendor specific files under arch/*/events/* perf/x86/amd: Update generic hardware cache events for Family 17h
| * | | | tools lib traceevent: Change tag string for errorLeo Yan2019-05-02
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The traceevent lib is used by the perf tool, and when executing perf test -v 6 it outputs error log on the ARM64 platform: running test 33 '*:*'trace-cmd: No such file or directory [...] trace-cmd: Invalid argument The trace event parsing code originally came from trace-cmd so it keeps the tag string "trace-cmd" for errors, this easily introduces the impression that the perf tool launches trace-cmd command for trace event parsing, but in fact the related parsing is accomplished by the traceevent lib. This patch changes the tag string to "libtraceevent" so that we can avoid confusion and let users to more easily connect the error with traceevent lib. Signed-off-by: Leo Yan <leo.yan@linaro.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20190424013802.27569-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller2019-04-26
|\ \ \ \ | |/ / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Alexei Starovoitov says: ==================== pull-request: bpf 2019-04-25 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) the bpf verifier fix to properly mark registers in all stack frames, from Paul. 2) preempt_enable_no_resched->preempt_enable fix, from Peter. 3) other misc fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | libbpf: add binary to gitignoreMatteo Croce2019-04-25
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some binaries are generated when building libbpf from tools/lib/bpf/, namely libbpf.so.0.0.2 and libbpf.so.0. Add them to the local .gitignore. Signed-off-by: Matteo Croce <mcroce@redhat.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* / | tools lib traceevent: Fix missing equality check for strcmpRikard Falkeborn2019-04-16
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There was a missing comparison with 0 when checking if type is "s64" or "u64". Therefore, the body of the if-statement was entered if "type" was "u64" or not "s64", which made the first strcmp() redundant since if type is "u64", it's not "s64". If type is "s64", the body of the if-statement is not entered but since the remainder of the function consists of if-statements which will not be entered if type is "s64", we will just return "val", which is correct, albeit at the cost of a few more calls to strcmp(), i.e., it will behave just as if the if-statement was entered. If type is neither "s64" or "u64", the body of the if-statement will be entered incorrectly and "val" returned. This means that any type that is checked after "s64" and "u64" is handled the same way as "s64" and "u64", i.e., the limiting of "val" to fit in for example "s8" is never reached. This was introduced in the kernel tree when the sources were copied from trace-cmd in commit f7d82350e597 ("tools/events: Add files to create libtraceevent.a"), and in the trace-cmd repo in 1cdbae6035cei ("Implement typecasting in parser") when the function was introduced, i.e., it has always behaved the wrong way. Detected by cppcheck. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Fixes: f7d82350e597 ("tools/events: Add files to create libtraceevent.a") Link: http://lkml.kernel.org/r/20190409091529.2686-1-rikard.falkeborn@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller2019-03-30
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Daniel Borkmann says: ==================== pull-request: bpf 2019-03-29 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Bug fix in BTF deduplication that was mishandling an equivalence comparison, from Andrii. 2) libbpf Makefile fixes to properly link against libelf for the shared object and to actually export AF_XDP's xsk.h header, from Björn. 3) Fix use after free in bpf inode eviction, from Daniel. 4) Fix a bug in skb creation out of cpumap redirect, from Jesper. 5) Remove an unnecessary and triggerable WARN_ONCE() in max number of call stack frames checking in verifier, from Paul. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * bpf, libbpf: fix quiet install_headersDaniel Borkmann2019-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Both btf.h and xsk.h headers are not installed quietly due to missing '\' for the call to QUIET_INSTALL. Lets fix it. Before: # make install_headers INSTALL headers if [ ! -d '''/usr/local/include/bpf' ]; then install -d -m 755 '''/usr/local/include/bpf'; fi; install btf.h -m 644 '''/usr/local/include/bpf'; if [ ! -d '''/usr/local/include/bpf' ]; then install -d -m 755 '''/usr/local/include/bpf'; fi; install xsk.h -m 644 '''/usr/local/include/bpf'; # ls /usr/local/include/bpf/ bpf.h btf.h libbpf.h xsk.h After: # make install_headers INSTALL headers # ls /usr/local/include/bpf/ bpf.h btf.h libbpf.h xsk.h Fixes: a493f5f9d8c2 ("libbpf: Install btf.h with libbpf") Fixes: 379e2014c95b ("libbpf: add xsk.h to install_headers target") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com>
| * libbpf: add libelf dependency to shared library buildBjörn Töpel2019-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DPDK project is moving forward with its AF_XDP PMD, and during that process some libbpf issues surfaced [1]: When libbpf was built as a shared library, libelf was not included in the linking phase. Since libelf is an internal depedency to libbpf, libelf should be included. This patch adds '-lelf' to resolve that. [1] https://patches.dpdk.org/patch/50704/#93571 Fixes: 1b76c13e4b36 ("bpf tools: Introduce 'bpf' library and add bpf feature check") Suggested-by: Luca Boccassi <bluca@debian.org> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| * libbpf: add xsk.h to install_headers targetBjörn Töpel2019-03-28
| | | | | | | | | | | | | | | | | | | | | | The xsk.h header file was missing from the install_headers target in the Makefile. This patch simply adds xsk.h to the set of installed headers. Fixes: 1cad07884239 ("libbpf: add support for using AF_XDP sockets") Reported-by: Bruce Richardson <bruce.richardson@intel.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| * libbpf: fix btf_dedup equivalence check handling of different kindsAndrii Nakryiko2019-03-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | btf_dedup_is_equiv() used to compare btf_type->info fields, before doing kind-specific equivalence check. This comparsion implicitly verified that candidate and canonical types are of the same kind. With enum fwd resolution logic this check couldn't be done generically anymore, as for enums info contains vlen, which differs between enum fwd and fully-defined enum, so this check was subsumed by kind-specific equivalence checks. This change caused btf_dedup_is_equiv() to let through VOID vs other types check to reach switch, which was never meant to be handing VOID kind, as VOID kind is always pre-resolved to itself and is only equivalent to itself, which is checked early in btf_dedup_is_equiv(). This change adds back BTF kind equality check in place of more generic btf_type->info check, still defering further kind-specific checks to a per-kind switch. Fixes: 9768095ba97c ("btf: resolve enum fwds in btf_dedup") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2019-03-27
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: "Fixes here and there, a couple new device IDs, as usual: 1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei. 2) Fix 64-bit division in iwlwifi, from Arnd Bergmann. 3) Fix documentation for some eBPF helpers, from Quentin Monnet. 4) Some UAPI bpf header sync with tools, also from Quentin Monnet. 5) Set descriptor ownership bit at the right time for jumbo frames in stmmac driver, from Aaro Koskinen. 6) Set IFF_UP properly in tun driver, from Eric Dumazet. 7) Fix load/store doubleword instruction generation in powerpc eBPF JIT, from Naveen N. Rao. 8) nla_nest_start() return value checks all over, from Kangjie Lu. 9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this merge window. From Marcelo Ricardo Leitner and Xin Long. 10) Fix memory corruption with large MTUs in stmmac, from Aaro Koskinen. 11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric Dumazet. 12) Fix topology subscription cancellation in tipc, from Erik Hugne. 13) Memory leak in genetlink error path, from Yue Haibing. 14) Valid control actions properly in packet scheduler, from Davide Caratti. 15) Even if we get EEXIST, we still need to rehash if a shrink was delayed. From Herbert Xu. 16) Fix interrupt mask handling in interrupt handler of r8169, from Heiner Kallweit. 17) Fix leak in ehea driver, from Wen Yang" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits) dpaa2-eth: fix race condition with bql frame accounting chelsio: use BUG() instead of BUG_ON(1) net: devlink: skip info_get op call if it is not defined in dumpit net: phy: bcm54xx: Encode link speed and activity into LEDs tipc: change to check tipc_own_id to return in tipc_net_stop net: usb: aqc111: Extend HWID table by QNAP device net: sched: Kconfig: update reference link for PIE net: dsa: qca8k: extend slave-bus implementations net: dsa: qca8k: remove leftover phy accessors dt-bindings: net: dsa: qca8k: support internal mdio-bus dt-bindings: net: dsa: qca8k: fix example net: phy: don't clear BMCR in genphy_soft_reset bpf, libbpf: clarify bump in libbpf version info bpf, libbpf: fix version info and add it to shared object rxrpc: avoid clang -Wuninitialized warning tipc: tipc clang warning net: sched: fix cleanup NULL pointer exception in act_mirr r8169: fix cable re-plugging issue net: ethernet: ti: fix possible object reference leak net: ibm: fix possible object reference leak ...
| * bpf, libbpf: clarify bump in libbpf version infoDaniel Borkmann2019-03-24
| | | | | | | | | | | | | | | | | | | | | | | | The current documentation suggests that we would need to bump the libbpf version on every change. Lets clarify this a bit more and reflect what we do today in practice, that is, bumping it once per development cycle. Fixes: 76d1b894c515 ("libbpf: Document API and ABI conventions") Reported-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
| * bpf, libbpf: fix version info and add it to shared objectDaniel Borkmann2019-03-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Even though libbpf's versioning script for the linker (libbpf.map) is pointing to 0.0.2, the BPF_EXTRAVERSION in the Makefile has not been updated along with it and is therefore still on 0.0.1. While fixing up, I also noticed that the generated shared object versioning information is missing, typical convention is to have a linker name (libbpf.so), soname (libbpf.so.0) and real name (libbpf.so.0.0.2) for library management. This is based upon the LIBBPF_VERSION as well. The build will then produce the following bpf libraries: # ll libbpf* libbpf.a libbpf.so -> libbpf.so.0.0.2 libbpf.so.0 -> libbpf.so.0.0.2 libbpf.so.0.0.2 # readelf -d libbpf.so.0.0.2 | grep SONAME 0x000000000000000e (SONAME) Library soname: [libbpf.so.0] And install them accordingly: # rm -rf /tmp/bld; mkdir /tmp/bld; make -j$(nproc) O=/tmp/bld install Auto-detecting system features: ... libelf: [ on ] ... bpf: [ on ] CC /tmp/bld/libbpf.o CC /tmp/bld/bpf.o CC /tmp/bld/nlattr.o CC /tmp/bld/btf.o CC /tmp/bld/libbpf_errno.o CC /tmp/bld/str_error.o CC /tmp/bld/netlink.o CC /tmp/bld/bpf_prog_linfo.o CC /tmp/bld/libbpf_probes.o CC /tmp/bld/xsk.o LD /tmp/bld/libbpf-in.o LINK /tmp/bld/libbpf.a LINK /tmp/bld/libbpf.so.0.0.2 LINK /tmp/bld/test_libbpf INSTALL /tmp/bld/libbpf.a INSTALL /tmp/bld/libbpf.so.0.0.2 # ll /usr/local/lib64/libbpf.* /usr/local/lib64/libbpf.a /usr/local/lib64/libbpf.so -> libbpf.so.0.0.2 /usr/local/lib64/libbpf.so.0 -> libbpf.so.0.0.2 /usr/local/lib64/libbpf.so.0.0.2 Fixes: 1bf4b05810fe ("tools: bpftool: add probes for eBPF program types") Fixes: 1b76c13e4b36 ("bpf tools: Introduce 'bpf' library and add bpf feature check") Reported-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller2019-03-16
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Daniel Borkmann says: ==================== pull-request: bpf 2019-03-16 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a umem memory leak on cleanup in AF_XDP, from Björn. 2) Fix BTF to properly resolve forward-declared enums into their corresponding full enum definition types during deduplication, from Andrii. 3) Fix libbpf to reject invalid flags in xsk_socket__create(), from Magnus. 4) Fix accessing invalid pointer returned from bpf_tcp_sock() and bpf_sk_fullsock() after bpf_sk_release() was called, from Martin. 5) Fix generation of load/store DW instructions in PPC JIT, from Naveen. 6) Various fixes in BPF helper function documentation in bpf.h UAPI header used to bpf-helpers(7) man page, from Quentin. 7) Fix segfault in BPF test_progs when prog loading failed, from Yonghong. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * btf: resolve enum fwds in btf_dedupAndrii Nakryiko2019-03-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GCC and clang support enum forward declarations as an extension. Such forward-declared enums will be represented as normal BTF_KIND_ENUM types with vlen=0. This patch adds ability to resolve such enums to their corresponding fully defined enums. This helps to avoid duplicated BTF type graphs which only differ by some types referencing forward-declared enum vs full enum. One such example in kernel is enum irqchip_irq_state, defined in include/linux/interrupt.h and forward-declared in include/linux/irq.h. This causes entire struct task_struct and all referenced types to be duplicated in btf_dedup output. This patch eliminates such duplication cases. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
generated by cgit v1.2.2 (git 2.25.0) at 2025-07-29 03:50:54 -0400