aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial
Commit message (Collapse)AuthorAge
...
| * tty: msm_serial: remove static clk rate setting in probeSrinivas Kandagatla2016-04-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The issue with setting up a fixed clock rate at probe is that it would overwrite the console rate set by the bootloader for its console device. This would result in serial out corruption or missing log when we system is booted with earlycon. This is not a issue if we boot system without earlycon. This setup is at least not required with the mainline driver, this code used to be required because the clk_enable() call would fail if clk_set_rate() wasn't called first. Originally the issue was noticed on DB410c which is based on APQ8016 chipset. Without this patch the console log with earlycon would look like: ... [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 ����+HH��0.699378] console [ttyMSM0] enabled [ 0.699378] console [ttyMSM0] enabled [ 0.702003] bootconsole [uart0] disabled [ 0.702003] bootconsole [uart0] disabled ... with this patch I can see all the skipped lines on the console Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Andy Gross <andy.gross@linaro.org> Tested-by: Pramod Gurav <gpramod@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * serial: core: Prevent unsafe uart port access, part 3Peter Hurley2016-04-30
| | | | | | | | | | | | | | | | | | | | For tty operations which may expect uart port to have been removed but still have other necessary work to accomplish, check for NULL uart port; specifically uart_close(), uart_hangup() and sub-functions (uart_shutdown() and uart_port_shutdown()). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * serial: core: Prevent unsafe uart port access, part 2Peter Hurley2016-04-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For serial core operations not already excluded by holding port->mutex, use reference counting to protect deferencing the state->uart_port. Introduce helper functions, uart_port_ref() and uart_port_deref(), to wrap uart_port access, and helper macros, uart_port_lock() and uart_port_unlock(), to wrap combination uart_port access with uart port lock sections. Port removal in uart_remove_one_port() waits for reference count to drop to zero before detaching the uart port from struct uart_state. For functions only reading the tx circular buffer indexes (where the uart port lock is claimed to prevent concurrent users), a NULL uart port is simply ignored and the operation completes normally. For functions change the tx circular buffer indexes (where the uart port lock is claimed to prevent concurrent users), the operation is aborted if the uart port is NULL (ie., has been detached). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * serial: core: Prevent unsafe uart port access, part 1Peter Hurley2016-04-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | uart_remove_one_port() may race with every serial core operation requiring a valid dereference of state->uart_port. In particular, uart_remove_one_port() may unlink the uart port concurrently with any serial core operation that may dereference same. Ensure safe dereference for those operations that already claim the port->mutex, and extend that guarantee for trivial cases, such as the ioctl handlers. Introduce the uart_port_check() helper which asserts port->mutex is held (only when lockdep is on). For ioctls, return -EIO as if the port has been hung up (since it has). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * serial: core: Expand port mutex section in uart_poll_init()Peter Hurley2016-04-30
| | | | | | | | | | | | | | | | | | Prepare uart_poll_init() to safely dereference uart port; expand the port mutex section to guarantee uart port remains valid until uart_poll_init() completes. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * tty: Replace ASYNC_INITIALIZED bit and update atomicallyPeter Hurley2016-04-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace ASYNC_INITIALIZED bit in the tty_port::flags field with TTY_PORT_INITIALIZED bit in the tty_port::iflags field. Introduce helpers tty_port_set_initialized() and tty_port_initialized() to abstract atomic bit ops. Note: the transforms for test_and_set_bit() and test_and_clear_bit() are unnecessary as the state transitions are already mutually exclusive; the tty lock prevents concurrent open/close/hangup. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * tty: Replace ASYNC_SUSPENDED bit and update atomicallyPeter Hurley2016-04-30
| | | | | | | | | | | | | | | | | | | | Replace ASYNC_SUSPENDED bit in the tty_port::flags field with TTY_PORT_SUSPENDED bit in the tty_port::iflags field. Introduce helpers tty_port_set_suspended() and tty_port_suspended() to abstract atomic bit ops. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * tty: Replace ASYNC_NORMAL_ACTIVE bit and update atomicallyPeter Hurley2016-04-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace ASYNC_NORMAL_ACTIVE bit in the tty_port::flags field with TTY_PORT_ACTIVE bit in the tty_port::iflags field. Introduce helpers tty_port_set_active() and tty_port_active() to abstract atomic bit ops. Extract state changes from port lock sections, as this usage is broken and confused; the state transitions are protected by the tty lock (which mutually excludes parallel open/close/hangup), and no user tests the active state while holding the port lock. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * tty: Replace TTY_THROTTLED bit tests with tty_throttled()Peter Hurley2016-04-30
| | | | | | | | | | | | | | Abstract TTY_THROTTLED bit tests with tty_throttled(). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * tty: Replace TTY_IO_ERROR bit tests with tty_io_error()Peter Hurley2016-04-30
| | | | | | | | | | | | | | | | | | Abstract TTY_IO_ERROR status test treewide with tty_io_error(). NB: tty->flags uses atomic bit ops; replace non-atomic bit test with test_bit(). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * tty: amba-pl011: Use 32-bit accesses for SBSA UARTChristopher Covington2016-04-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Version 2 of the Server Base System Architecture (SBSAv2) describes UART hardware registers as 32 bits wide, giving no guidance on access sizes. The SBSA UART driver previously assumed partial-length 16 and 8 bit accesses would work. But the SBSAv2 UART hardware on the Qualcomm Technologies QDF2432 only supports full-length 32 bit register accesses, so use those exclusively. This is compatible with SBSAv3, which explicitly requires UART hardware support 32 (and 16 and sometimes 8) bit accesses. Tested on Juno, Midway, QDF2432, Seattle, and X-Gene 1. Tested-by: Mark Langsdorf <mlangsdo@redhat.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * tty/serial: atmel: fix hardware handshake selectionAlexandre Belloni2016-04-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 1cf6e8fc8341 ("tty/serial: at91: fix RTS line management when hardware handshake is enabled") actually allowed to enable hardware handshaking. Before, the CRTSCTS flags was silently ignored. As the DMA controller can't drive RTS (as explain in the commit message). Ensure that hardware flow control stays disabled when DMA is used and FIFOs are not available. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Fixes: 1cf6e8fc8341 ("tty/serial: at91: fix RTS line management when hardware handshake is enabled") Cc: stable <stable@vger.kernel.org> # v4.0+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * serial: 8250_pci: fix divide error bug if baud rate is 0David Müller2016-04-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 21947ba654a6 ("serial: 8250_pci: replace switch-case by formula"), the 8250 driver crashes in the byt_set_termios() function with a divide error. This is caused by the fact that a baud rate of 0 (B0) is not handled properly. Fix it by falling back to B9600 in this case. Signed-off-by: David Müller <d.mueller@elsoft.ch> Fixes: 21947ba654a6 ("serial: 8250_pci: replace switch-case by formula") Cc: stable@vger.kernel.org Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge tag 'dmaengine-4.7-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2016-05-19
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull dmaengine updates from Vinod Koul: "This time round the update brings in following changes: - new tegra driver for ADMA device - support for Xilinx AXI Direct Memory Access Engine and Xilinx AXI Central Direct Memory Access Engine and few updates to this driver - new cyclic capability to sun6i and few updates - slave-sg support in bcm2835 - updates to many drivers like designware, hsu, mv_xor, pxa, edma, qcom_hidma & bam" * tag 'dmaengine-4.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (84 commits) dmaengine: ioatdma: disable relaxed ordering for ioatdma dmaengine: of_dma: approximate an average distribution dmaengine: core: Use IS_ENABLED() instead of checking for built-in or module dmaengine: edma: Re-evaluate errors when ccerr is triggered w/o error event dmaengine: qcom_hidma: add support for object hierarchy dmaengine: qcom_hidma: add debugfs hooks dmaengine: qcom_hidma: implement lower level hardware interface dmaengine: vdma: Add clock support Documentation: DT: vdma: Add clock support for dmas dmaengine: vdma: Add config structure to differentiate dmas MAINTAINERS: Update Tegra DMA maintainers dmaengine: tegra-adma: Add support for Tegra210 ADMA Documentation: DT: Add binding documentation for NVIDIA ADMA dmaengine: vdma: Add Support for Xilinx AXI Central Direct Memory Access Engine Documentation: DT: vdma: update binding doc for AXI CDMA dmaengine: vdma: Add Support for Xilinx AXI Direct Memory Access Engine Documentation: DT: vdma: update binding doc for AXI DMA dmaengine: vdma: Rename xilinx_vdma_ prefix to xilinx_dma dmaengine: slave means at least one of DMA_SLAVE, DMA_CYCLIC dmaengine: mv_xor: Allow selecting mv_xor for mvebu only compatible SoC ...
| * | dmaengine: dw: rename masters to reflect actual topologyAndy Shevchenko2016-04-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The source and destination masters are reflecting buses or their layers to where the different devices can be connected. The patch changes the master names to reflect which one is related to which independently on the transfer direction. The outcome of the change is that the memory data width is now always limited by a data width of the master which is dedicated to communicate to memory. The patch will not break anything since all current users have the same data width for all masters. Though it would be nice to revisit avr32 platforms to check what is the actual hardware topology in use there. It seems that it has one bus and two masters on it as stated by Table 8-2, that's why everything works independently on the master in use. The purpose of the sequential patch is to fix the driver for configuration of more than one bus. The change is done in the assumption that src_master and dst_master are reflecting a connection to the memory and peripheral correspondently on avr32 and otherwise on the rest. Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* | | Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2016-05-19
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for 4.7. Here's the summary of the changes: - ATH79: Support for DTB passuing using the UHI boot protocol - ATH79: Remove support for builtin DTB. - ATH79: Add zboot debug serial support. - ATH79: Add initial support for Dragino MS14 (Dragine 2), Onion Omega and DPT-Module. - ATH79: Update devicetree clock support for AR9132 and AR9331. - ATH79: Cleanup the DT code. - ATH79: Support newer SOCs in ath79_ddr_ctrl_init. - ATH79: Fix regression in PCI window initialization. - BCM47xx: Move SPROM driver to drivers/firmware/ - BCM63xx: Enable partition parser in defconfig. - BMIPS: BMIPS5000 has I cache filing from D cache - BMIPS: BMIPS: Add cpu-feature-overrides.h - BMIPS: Add Whirlwind support - BMIPS: Adjust mips-hpt-frequency for BCM7435 - BMIPS: Remove maxcpus from BCM97435SVMB DTS - BMIPS: Add missing 7038 L1 register cells to BCM7435 - BMIPS: Various tweaks to initialization code. - BMIPS: Enable partition parser in defconfig. - BMIPS: Cache tweaks. - BMIPS: Add UART, I2C and SATA devices to DT. - BMIPS: Add BCM6358 and BCM63268support - BMIPS: Add device tree example for BCM6358. - BMIPS: Improve Improve BCM6328 and BCM6368 device trees - Lantiq: Add support for device tree file from boot loader - Lantiq: Allow build with no built-in DT. - Loongson 3: Reserve 32MB for RS780E integrated GPU. - Loongson 3: Fix build error after ld-version.sh modification - Loongson 3: Move chipset ACPI code from drivers to arch. - Loongson 3: Speedup irq processing. - Loongson 3: Add basic Loongson 3A support. - Loongson 3: Set cache flush handlers to nop. - Loongson 3: Invalidate special TLBs when needed. - Loongson 3: Fast TLB refill handler. - MT7620: Fallback strategy for invalid syscfg0. - Netlogic: Fix CP0_EBASE redefinition warnings - Octeon: Initialization fixes - Octeon: Add DTS files for the D-Link DSR-1000N and EdgeRouter Lite - Octeon: Enable add Octeon-drivers in cavium_octeon_defconfig - Octeon: Correctly handle endian-swapped initramfs images. - Octeon: Support CN73xx, CN75xx and CN78xx. - Octeon: Remove dead code from cvmx-sysinfo. - Octeon: Extend number of supported CPUs past 32. - Octeon: Remove some code limiting NR_IRQS to 255. - Octeon: Simplify octeon_irq_ciu_gpio_set_type. - Octeon: Mark some functions __init in smp.c - Octeon: Octeon: Add Octeon III CN7xxx interface detection - PIC32: Add serial driver and bindings for it. - PIC32: Add PIC32 deadman timer driver and bindings. - PIC32: Add PIC32 clock timer driver and bindings. - Pistachio: Determine SoC revision during boot - Sibyte: Fix Kconfig dependencies of SIBYTE_BUS_WATCHER. - Sibyte: Strip redundant comments from bcm1480_regs.h. - Panic immediately if panic_on_oops is set. - module: fix incorrect IS_ERR_VALUE macro usage. - module: Make consistent use of pr_* - Remove no longer needed work_on_cpu() call. - Remove CONFIG_IPV6_PRIVACY from defconfigs. - Fix registers of non-crashing CPUs in dumps. - Handle MIPSisms in new vmcore_elf32_check_arch. - Select CONFIG_HANDLE_DOMAIN_IRQ and make it work. - Allow RIXI to be used on non-R2 or R6 cores. - Reserve nosave data for hibernation - Fix siginfo.h to use strict POSIX types. - Don't unwind user mode with EVA. - Fix watchpoint restoration - Ptrace watchpoints for R6. - Sync icache when it fills from dcache - I6400 I-cache fills from dcache. - Various MSA fixes. - Cleanup MIPS_CPU_* definitions. - Signal: Move generic copy_siginfo to signal.h - Signal: Fix uapi include in exported asm/siginfo.h - Timer fixes for sake of KVM. - XPA TLB refill fixes. - Treat perf counter feature - Update John Crispin's email address - Add PIC32 watchdog and bindings. - Handle R10000 LL/SC bug in set_pte() - cpufreq: Various fixes for Longson1. - R6: Fix R2 emulation. - mathemu: Cosmetic fix to ADDIUPC emulation, plenty of other small fixes - ELF: ABI and FP fixes. - Allow for relocatable kernel and use that to support KASLR. - Fix CPC_BASE_ADDR mask - Plenty fo smp-cps, CM, R6 and M6250 fixes. - Make reset_control_ops const. - Fix kernel command line handling of leading whitespace. - Cleanups to cache handling. - Add brcm, bcm6345-l1-intc device tree bindings. - Use generic clkdev.h header - Remove CLK_IS_ROOT usage. - Misc small cleanups. - CM: Fix compilation error when !MIPS_CM - oprofile: Fix a preemption issue - Detect DSP ASE v3 support:1" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (275 commits) MIPS: pic32mzda: fix getting timer clock rate. MIPS: ath79: fix regression in PCI window initialization MIPS: ath79: make ath79_ddr_ctrl_init() compatible for newer SoCs MIPS: Fix VZ probe gas errors with binutils <2.24 MIPS: perf: Fix I6400 event numbers MIPS: DEC: Export `ioasic_ssr_lock' to modules MIPS: MSA: Fix a link error on `_init_msa_upper' with older GCC MIPS: CM: Fix compilation error when !MIPS_CM MIPS: Fix genvdso error on rebuild USB: ohci-jz4740: Remove obsolete driver MIPS: JZ4740: Probe OHCI platform device via DT MIPS: JZ4740: Qi LB60: Remove support for AVT2 variant MIPS: pistachio: Determine SoC revision during boot MIPS: BMIPS: Adjust mips-hpt-frequency for BCM7435 mips: mt7620: fallback to SDRAM when syscfg0 does not have a valid value for the memory type MIPS: Prevent "restoration" of MSA context in non-MSA kernels MIPS: cevt-r4k: Dynamically calculate min_delta_ns MIPS: malta-time: Take seconds into account MIPS: malta-time: Start GIC count before syncing to RTC MIPS: Force CPUs to lose FP context during mode switches ...
| * | | serial: pic32_uart: Add PIC32 UART driverAndrei Pistirica2016-05-13
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds UART and a serial console driver for Microchip PIC32 class devices. [ralf@linux-mips.org: Resolved merge conflict.] Signed-off-by: Andrei Pistirica <andrei.pistirica@microchip.com> Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Reviewed-by: Alan Cox <alan@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-serial@vger.kernel.org Cc: linux-api@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12101/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | | Merge tag 'gpio-v4.7-1' of ↵Linus Torvalds2016-05-17
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for kernel cycle v4.7: Core infrastructural changes: - Support for natively single-ended GPIO driver stages. This means that if the hardware has registers to configure open drain or open source configuration, we use that rather than (as we did before) try to emulate it by switching the line to an input to get high impedance. This is also documented throughly in Documentation/gpio/driver.txt for those of you who did not understand one word of what I just wrote. - Start to do away with the unnecessarily complex and unitelligible ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB, another evolutional artifact from the time when the GPIO subsystem was unmaintained. Archs can now just select GPIOLIB and be done with it, cleanups to arches will trickle in for the next kernel. Some minor archs ACKed the changes immediately so these are included in this pull request. - Advancing the use of the data pointer inside the GPIO device for storing driver data by switching the PowerPC, Super-H Unicore and a few other subarches or subsystem drivers in ALSA SoC, Input, serial, SSB, staging etc to use it. - The initialization now reads the input/output state of the GPIO lines, so that each GPIO descriptor knows - if this callback is implemented - whether the line is input or output. This also reflects nicely in userspace "lsgpio". - It is now possible to name GPIO producer names, line names, from the device tree. (Platform data has been supported for a while). I bet we will get a similar mechanism for ACPI one of those days. This makes is possible to get sensible producer names for e.g. GPIO rails in "lsgpio" in userspace. New drivers: - New driver for the Loongson1. - The XLP driver now supports Broadcom Vulcan ARM64. - The IT87 driver now supports IT8620 and IT8628. - The PCA953X driver now supports Galileo Gen2. Driver improvements: - MCP23S08 was switched to use the gpiolib irqchip helpers and now also suppors level-triggered interrupts. - 74x164 and RCAR now supports the .set_multiple() callback - AMDPT was converted to use generic GPIO. - TC3589x, TPS65218, SX150X, F7188X, MENZ127, VX855, WM831X, WM8994 support the new single ended callback for open drain and in some cases open source. - Implement the .get_direction() callback for a few more drivers like PL061, Xgene. Cleanups: - Paul Gortmaker combed through the drivers and de-modularized those who are not really modules. - Move the GPIO poweroff DT bindings to the power subdir where they belong. - Rename gpio-generic.c to gpio-mmio.c, which is much more to the point. That's what it is handling, nothing more, nothing less" * tag 'gpio-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (126 commits) MIPS: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB gpio: zevio: make it explicitly non-modular gpio: timberdale: make it explicitly non-modular gpio: stmpe: make it explicitly non-modular gpio: sodaville: make it explicitly non-modular pinctrl: sh-pfc: Let gpio_chip.to_irq() return zero on error gpio: dwapb: Add ACPI device ID for DWAPB GPIO controller on X-Gene platforms gpio: dt-bindings: add wd,mbl-gpio bindings gpio: of: make it possible to name GPIO lines gpio: make gpiod_to_irq() return negative for NO_IRQ gpio: xgene: implement .get_direction() gpio: xgene: Enable ACPI support for X-Gene GFC GPIO driver gpio: tegra: Implement gpio_get_direction callback gpio: set up initial state from .get_direction() gpio: rename gpio-generic.c into gpio-mmio.c gpio: generic: fix GPIO_GENERIC_PLATFORM is set to module case gpio: dwapb: add gpio-signaled acpi event support gpio: dwapb: convert device node to fwnode gpio: dwapb: remove name from dwapb_port_property gpio/qoriq: select IRQ_DOMAIN ...
| * | | serial: sc16is7xx: use gpiochip data pointerLinus Walleij2016-04-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Jiri Slaby <jslaby@suse.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | serial: max310x: use gpiochip data pointerLinus Walleij2016-04-26
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Jiri Slaby <jslaby@suse.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | | Merge branch 'for-linus' of ↵Linus Torvalds2016-05-17
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (21 commits) gitignore: fix wording mfd: ab8500-debugfs: fix "between" in printk memstick: trivial fix of spelling mistake on management cpupowerutils: bench: fix "average" treewide: Fix typos in printk IB/mlx4: printk fix pinctrl: sirf/atlas7: fix printk spelling serial: mctrl_gpio: Grammar s/lines GPIOs/line GPIOs/, /sets/set/ w1: comment spelling s/minmum/minimum/ Blackfin: comment spelling s/divsor/divisor/ metag: Fix misspellings in comments. ia64: Fix misspellings in comments. hexagon: Fix misspellings in comments. tools/perf: Fix misspellings in comments. cris: Fix misspellings in comments. c6x: Fix misspellings in comments. blackfin: Fix misspelling of 'register' in comment. avr32: Fix misspelling of 'definitions' in comment. treewide: Fix typos in printk Doc: treewide : Fix typos in DocBook/filesystem.xml ...
| * | serial: mctrl_gpio: Grammar s/lines GPIOs/line GPIOs/, /sets/set/Geert Uytterhoeven2016-04-18
| |/ | | | | | | | | Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | Revert "serial: 8250: Add hardware dependency to RT288X option"Greg Kroah-Hartman2016-04-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 8d2acdb9fc3a544ab0442634531834d6007b5467. It's causing problems, and somehow I missed that Peter didn't like it at all :( So revert it for now until it gets sorted out. Reported-by: Mason <slash.tmp@free.fr> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Jean Delvare <jdelvare@suse.de> Cc: Mans Rullgard <mans@mansr.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: John Crispin <blogic@openwrt.org> Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
* | tty/serial/8250: fix RS485 half-duplex RXYegor Yefremov2016-04-19
| | | | | | | | | | | | | | | | | | | | | | | | When in half-duplex mode RX will be disabled before TX, but not enabled after deactivating transmitter. This patch enables UART_IER_RLSI and UART_IER_RDI interrupts after TX is over. Cc: Matwey V. Kornilov <matwey@sai.msu.ru> Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Fixes: e490c9144cfa ("tty: Add software emulated RS485 support for 8250") Acked-by: Matwey V. Kornilov <matwey@sai.msu.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Revert "serial-uartlite: Constify uartlite_be/uartlite_le"Sudip Mukherjee2016-04-19
|/ | | | | | | | | | | | | | | | | | | | This reverts commit 2905697a82eaf20606ced164d853b52d1b94aaa8. The commit introduced two build warnings: drivers/tty/serial/uartlite.c: In function ‘ulite_request_port’: drivers/tty/serial/uartlite.c:348:21: warning: assignment discards ‘const’ qualifier from pointer target type port->private_data = &uartlite_be; ^ drivers/tty/serial/uartlite.c:354:22: warning: assignment discards ‘const’ qualifier from pointer target type port->private_data = &uartlite_le; ^ Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Cc: Maarten Brock <m.brock@vanmierlo.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250: describe CONFIG_SERIAL_8250_RSAMaciej S. Szmigiero2016-03-07
| | | | | | | | | CONFIG_SERIAL_8250_RSA has waited for a long time to have meaningful help text so let's finally describe what this option actually does. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: samsung: optimize UART rx fifo access routineYoungmin Nam2016-03-07
| | | | | | | | | | | | | | This patch optimizes UART rx fifo access routine by reading UART SFR when necessary. At first, the "fifocnt" variable will be initialized as Rx FIFO count. So we don't need to access UFSTAT(FIFO status) register every time to check FIFO count because we know that count with "fifocnt". After all data were read out from Rx FIFO, the "fifocnt" will be set as 0. Lastly, UFSTAT will be accessed again to check whether the data remains by any chance. Signed-off-by: Youngmin Nam <ym0914@gmail.com> Reviewed-by: Jung-Ick Guack <ji.guack@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: pl011: add mark/space parity supportEd Spiridonov2016-03-07
| | | | | | | | PL011 UART has hardware mark/space parity ability, this trivial patch adds support for it. Tested on Raspberry Pi v1, v2 (BCM2835 and BCM2836) Signed-off-by: Ed Spiridonov <edo.rus@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty: serial: 8250: add MOXA Smartio MUE boards supportMathieu OTHACEHE2016-03-07
| | | | | | | | | | | | | | | | | | | | | | | | | | Add support for : - CP-102E: 2 ports RS232 PCIE card - CP-102EL: 2 ports RS232 PCIE card - CP-132EL: 2 ports RS422/485 PCIE card - CP-114EL: 4 ports RS232/422/485 PCIE card - CP-104EL-A: 4 ports RS232 PCIE card - CP-168EL-A: 8 ports RS232 PCIE card - CP-118EL-A: 8 ports RS232/422/485 PCIE card - CP-118E-A: 8 ports RS422/485 PCIE card - CP-138E-A: 8 ports RS422/485 PCIE card - CP-134EL-A: 4 ports RS422/485 PCIE card - CP-116E-A (A): 8 ports RS232/422/485 PCIE card - CP-116E-A (B): 8 ports RS232/422/485 PCIE card This patch is based on information extracted from vendor mxupcie driver available on MOXA website. I was able to test it on a CP-168EL-A on PC. Signed-off-by: Mathieu OTHACEHE <m.othacehe@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250: convert drivers to use up_to_u8250p()Andy Shevchenko2016-03-07
| | | | | | | | up_to_u8250p() casts struct uart_port * to struct uart_8250_port *. Update code to use it instead of open coded variant. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250/mediatek: fix building with SERIAL_8250=mArnd Bergmann2016-03-07
| | | | | | | | | | | | | | | | | | | | | | | | The Mediatek 8250 driver has a 'bool' Kconfig symbol, but that breaks when SERIAL_8250 is a loadable module: drivers/tty/built-in.o: In function `mtk8250_set_termios': :(.text+0x1bee8): undefined reference to `serial8250_do_set_termios' :(.text+0x1bf10): undefined reference to `uart_get_baud_rate' :(.text+0x1c09c): undefined reference to `uart_get_divisor' drivers/tty/built-in.o: In function `mtk8250_do_pm': :(.text+0x1c0d0): undefined reference to `serial8250_do_pm' drivers/tty/built-in.o: In function `mtk8250_probe': :(.text+0x1c2e4): undefined reference to `serial8250_register_8250_port' serial/8250/8250_mtk.c:287:242: error: data definition has no type or storage class [-Werror] serial/8250/8250_mtk.c:287:122: error: 'mtk8250_platform_driver_init' defined but not used [-Werror=unused-function] This changes the symbol to a 'tristate', so the dependency on SERIAL_8250 also works when that is set to 'm'. To actually build the driver, we also need to include <linux/module.h>. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250/ingenic: fix building with SERIAL_8250=mArnd Bergmann2016-03-07
| | | | | | | | | | | | | | | | | | The Ingenic 8250 driver has a 'bool' Kconfig symbol, but that breaks when SERIAL_8250 is a loadable module: drivers/tty/built-in.o: In function `ingenic_uart_probe': 8250_ingenic.c:(.text+0x1c1a0): undefined reference to `serial8250_register_8250_port' This changes the symbol to a 'tristate', plus a dependency on SERIAL_8250, which makes it work again. Unlike the other soc-specific backends, this one has no dependency on an architecture or a platform. I'm adding a dependency on MIPS || COMPILE_TEST as well here, to avoid showing the driver on architectures that are not interested in it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250/uniphier: fix modular buildArnd Bergmann2016-03-07
| | | | | | | | | | | | | | The newly added uniphier serial port driver fails to build as a loadable module when the base 8250 driver is built-in and its console support enabled: ERROR: "early_serial8250_setup" [drivers/tty/serial/8250/8250_uniphier.ko] undefined! This changes the driver to only provide the early console support if it is built-in itself as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert "drivers/tty/serial: make 8250/8250_ingenic.c explicitly non-modular"Arnd Bergmann2016-03-07
| | | | | | | | | | | | | | | This reverts commit cafe1ac64023 ("drivers/tty: make serial 8250_ingenic.c explicitly non-modular"), which attempted to remove dead code but did not have the desired effect when the main 8250 driver was a loadable module itself. This would normally result in a link error, but as the entire drivers/tty/serial/8250/ directory is only entered when CONFIG_SERIAL_8250 is set, we never notice that the driver does not get built in this configuration. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert "drivers/tty/serial: make 8250/8250_mtk.c explicitly non-modular"Arnd Bergmann2016-03-07
| | | | | | | | | | | | | | | | This reverts commit d72d391c126e ("drivers/tty/serial: make 8250/8250_mtk.c explicitly non-modular"), which intended to remove dead code but did not have the desired effect when the main 8250 driver was a module itself. This would normally result in a link error, but as the entire drivers/tty/serial/8250/ directory is only entered when CONFIG_SERIAL_8250 is set, we never notice that the driver does not get built in this configuration. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: mvebu-uart: initial support for Armada-3700 serial portWilson Ding2016-03-07
| | | | | | | | | | | | | | | | | | | | | | | | Armada-3700's uart is a simple serial port, which doesn't support. Configuring the modem control lines. The uart port has a 32 bytes Tx FIFO and a 64 bytes Rx FIFO The uart driver implements the uart core operations. It also support the system (early) console based on Armada-3700's serial port. Known Issue: The uart driver currently doesn't support clock programming, which means the baud-rate stays with the default value configured by the bootloader at boot time [gregory.clement@free-electrons.com: Rewrite many part which are too long to enumerate] Signed-off-by: Wilson Ding <dingwei@marvell.com> Signed-off-by: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: mctrl_gpio: Add missing module licenseRomain Izard2016-03-07
| | | | | | | | | | As the mctrl_gpio driver can be built as a module, it needs to have its license specified with MODULE_LICENSE. Otherwise, it cannot access required symbols exported through EXPORT_SYMBOL_GPL. Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: ifx6x60: avoid uninitialized variable useArnd Bergmann2016-03-07
| | | | | | | | | | | | | | | | | | | | | | | | | | gcc warns about a potential use of an uninitialized variable in this driver: drivers/tty/serial/ifx6x60.c: In function 'ifx_spi_complete': drivers/tty/serial/ifx6x60.c:713:6: warning: 'more' may be used uninitialized in this function [-Wmaybe-uninitialized] if (more || ifx_dev->spi_more || queue_length > 0 || Unlike a lot of other such warnings, this one is correct and describes an actual problem in the handling of the "IFX_SPI_HEADER_F" result code. This appears to be a result from a restructuring of the driver that dates back to before it was merged in the kernel, so it's impossible to know where it went wrong. I also don't know what that result code means, so I have no idea if setting 'more' to zero is the correct solution, but at least it makes the behavior reproducible rather than depending on whatever happens to be on the kernel stack. This patch initializes the 'more' variable to zero in each of the three code paths that could result in undefined behavior before, which is more explicit than initializing it at the start of the function. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty/serial: at91: fix bad offset for UART timeout registerLudovic Desroches2016-03-07
| | | | | | | | | | | | | With SAMA5D2, the UART has hw timeout but the offset of the register to define this value is not the same as the one for USART. When using the new UART, the value of this register was 0 so we never get timeout irqs. It involves that when using DMA, we were stuck until the execution of the dma callback which happens when a buffer is full (so after receiving 2048 bytes). Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty/serial: at91: restore dynamic driver bindingRomain Izard2016-03-07
| | | | | | | | | | | | | | | | | | | | | | | | | In commit c39dfebc7798956fd2140ae6321786ff35da30c3, the modular support code for atmel_serial was removed, as the driver cannot be built as a module. Because no use case was proposed, the dynamic driver binding support was removed as well. The atmel_serial driver can manage up to 7 serial controllers, which are multiplexed with other functions. For example, in the Atmel SAMA5D2, the Flexcom controllers can work as USART, SPI or I2C controllers, and on all Atmel devices serial lines can be reconfigured as GPIOs. My use case uses GPIOs to transfer a firmware update using a custom protocol on the lines used as a serial port during the normal life of the device. If it is not possible to unbind the atmel_serial driver, the GPIO lines remain reserved and prevent this case from working. This patch reinstates the atmel_serial_remove function, and fixes it as it failed to clear the "clk" field on removal, triggering an oops when a device was bound again after being unbound. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250: Add hardware dependency to RT288X optionJean Delvare2016-03-07
| | | | | | | | | | | | Kconfig option SERIAL_8250_RT288X seems to be only relevant on MIPS platforms, so do not present it on other architectures, unless build-testing. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Mans Rullgard <mans@mansr.com> Cc: Jiri Slaby <jslaby@suse.com> Acked-by: John Crispin <blogic@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial-uartlite: Configure for rising edge irq trigger.Maarten Brock2016-03-07
| | | | | | | This device generates a short rising pulse on the interrupt request line. Signed-off-by: Maarten Brock <m.brock@vanmierlo.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial-uartlite: Spinlock inside the loop.Maarten Brock2016-03-07
| | | | | | | Better to hold the spinlock as short as possible. Signed-off-by: Maarten Brock <m.brock@vanmierlo.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial-uartlite: Constify uartlite_be/uartlite_leMaarten Brock2016-03-07
| | | | | | | Made uartlite_be and uartlite_le constants. Signed-off-by: Maarten Brock <m.brock@vanmierlo.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial-uartlite: Enlarge maximum nr of devices to 16.Maarten Brock2016-03-07
| | | | | | | | This device is ideal to use when you need a lot of uarts in your FPGA. Try not to force all those users to patch their kernel. Signed-off-by: Maarten Brock <m.brock@vanmierlo.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250_pci: all known Braswell ports are 1 channelAndy Shevchenko2016-03-07
| | | | | | | | | | There is no need to have channel offset defined since all BayTrail and Braswell ports are 1 channel. Remove unneeded definition. While here, remove comment which has no value. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250_pci: convert to pcim_*() APIAndy Shevchenko2016-03-07
| | | | | | | | The managed API provides a better approach to help with acquiring and releasing resources. Besides that error handling becomes simpler. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250_dw: remove leftover definitionsAndy Shevchenko2016-03-07
| | | | | | | | The clocks are managed through clk-fractional-divider.c module, and thus CLK framework takes care about it. Remove letfovers from this driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250_dw: remove redundant 'else' keywordAndy Shevchenko2016-03-07
| | | | | | | | When the main branch contains return statement the 'else' keyword is not needed. Remove it here. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: xuartps: Enable OF earlycon supportMichal Simek2016-03-07
| | | | | | | | | | | | Support early console setup via DT for all listed compatible strings. Remove EARLYCON_DECLARE which was done by: "Use common framework for earlycon declarations" (sha1: 2eaa790989e03900298ad24f77f1086dbbc1aebd) when OF_EARLYCON_DECLARE is defined. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.2 (git 2.25.0) at 2025-03-30 20:29:53 -0400