aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel
Commit message (Collapse)AuthorAge
...
* | ixgbe: Fix flow control for Xeon D KR backplaneMark Rustad2016-04-04
| | | | | | | | | | | | | | | | | | | | Xeon D KR backplane is different from other backplanes, in that we can't use auto-negotiation to determine the mode. Instead, use whatever the user configured. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbevf: Add support for generic Tx checksumsAlexander Duyck2016-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for generic Tx checksums to the ixgbevf driver. It turns out this is actually pretty easy after going over the datasheet as we were doing a number of steps we didn't need to. In order to perform a Tx checksum for an L4 header we need to fill in the following fields in the Tx descriptor: MACLEN (maximum of 127), retrieved from: skb_network_offset() IPLEN (maximum of 511), retrieved from: skb_checksum_start_offset() - skb_network_offset() TUCMD.L4T indicates offset and if checksum or crc32c, based on: skb->csum_offset The added advantage to doing this is that we can support inner checksum offloads for tunnels and MPLS while still being able to transparently insert VLAN tags. I also took the opportunity to clean-up many of the feature flag configuration bits to make them a bit more consistent between drivers. In the case of the VF drivers this meant adding support for SCTP CRCs, and inner checksum offloads for MPLS and various tunnel types. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: Add support for generic Tx checksumsAlexander Duyck2016-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for generic Tx checksums to the ixgbe driver. It turns out this is actually pretty easy after going over the datasheet as we were doing a number of steps we didn't need to. In order to perform a Tx checksum for an L4 header we need to fill in the following fields in the Tx descriptor: MACLEN (maximum of 127), retrieved from: skb_network_offset() IPLEN (maximum of 511), retrieved from: skb_checksum_start_offset() - skb_network_offset() TUCMD.L4T indicates offset and if checksum or crc32c, based on: skb->csum_offset The added advantage to doing this is that we can support inner checksum offloads for tunnels and MPLS while still being able to transparently insert VLAN tags. I also took the opportunity to clean-up many of the feature flag configuration bits to make them a bit more consistent between drivers. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: use eth_platform_get_mac_address()Sowmini Varadhan2016-04-04
| | | | | | | | | | | | | | | | | | | | | | This commit converts commit c762dff24c06 ("ixgbe: Look up MAC address in Open Firmware or IDPROM") to use eth_platform_get_mac_address() added by commit c7f5d105495a ("net: Add eth_platform_get_mac_address() helper.") Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: Make all unchanging ops structures constMark Rustad2016-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | The source for the ops structure contents are const, so make them so. Copy them in place with structure assignments instead of memcpys. Make the mbx_ops accessed by reference instead of making a copy of the source structure. Update copyright date on the touched files. Reported-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: Avoid adding VLAN 0 twice to VLVF and VFTAAlexander Duyck2016-04-04
| | | | | | | | | | | | | | | | | | | | We were adding VLAN 0 twice each time we restored the VLAN configuration. Instead of doing it twice we can just start working through the active VLANs from ID 1 on and skip the double write. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: Do not allow PF to add VLVF entry unless it actually needs itAlexander Duyck2016-04-04
| | | | | | | | | | | | | | | | | | | | | | | | While doing the work on igb I realized there were a few cases where we were still adding VLANs to the VLVF entries for the PF when they were not needed. This patch cleans that up so that the only time we add a PF entry to the VLVF is either for VLAN 0 or if the PF has requested a VLAN that a VF is already using. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: Extend trust to allow guest to set unicast addresschas williams2016-04-04
| | | | | | | | | | | | | | | | | | | | | | When running certain routing protocols like VRRP, VF guests need the ability to set the unicast address of the interface. Extend the new ndo trust feature to let the hypervisor trust a guest to set/update its own unicast address. Signed-off-by: Chas Williams <3chas3@gmail.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbevf: use bit operations for setting and checking resetsEmil Tantilov2016-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the reset flags to adapter->state in order to make use of bit operations. This is an alternative patch to the one previously submitted by John Greene. Suggested-by: Alexander Duyck <aduyck@mirantis.com> Reported-by: Scott Otto <otts62@yahoo.com> Reported-by: John Greene <jogreene@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: on recv increment rx.ring->stats.yieldsPavel Tikhomirov2016-04-04
|/ | | | | | | | | | | | | | | | | It seem to be non intentionally changed to Tx in commit adc810900a70 ("ixgbe: Refactor busy poll socket code to address multiple issues") Lock is taken from ixgbe_low_latency_recv, and there under this lock we use ixgbe_clean_rx_irq so it looks wrong for me to increment Tx counter. Yield stats can be shown through ethtool: ethtool -S enp129s0 | grep yield Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Fix cls_u32 offload support for L4 portsSridhar Samudrala2016-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix support for 16 bit source/dest port matches in ixgbe model. u32 uses a single 32-bit key value for both source and destination ports starting at offset 0. So replace the 2 functions with a single function that takes this key value/mask to program both source and dest ports. Verified with the following filter: #tc qdisc add dev p4p1 ingress #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1: u32 divisor 1 #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:10 u32 ht 800: link 1: \ offset at 0 mask 0f00 shift 6 plus 0 eat match ip protocol 6 ff #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1:0:10 u32 ht 1: \ match tcp src 1024 ffff match tcp dst 80 ffff action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1:0:11 u32 ht 1: \ match tcp src 1025 ffff action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1:0:12 u32 ht 1: \ match tcp dst 81 ffff action drop Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Fix cls_u32 offload support for fields with masksSridhar Samudrala2016-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | Remove the incorrect check for mask in ixgbe_configure_clsu32 and drop the 'mask' field that is not required in struct ixgbe_mat_field Verified with the following filters: #tc qdisc add dev p4p1 ingress #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:1 u32 ht 800: \ match ip dst 10.0.0.1/8 match ip src 10.0.0.2/8 action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:2 u32 ht 800: \ match ip dst 11.0.0.1/16 match ip src 11.0.0.2/16 action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:3 u32 ht 800: \ match ip dst 12.0.0.1/24 match ip src 12.0.0.2/24 action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:4 u32 ht 800: \ match ip dst 13.0.0.1/32 match ip src 13.0.0.2/32 action drop Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: fix error handling in TC cls_u32 offload routinesSridhar Samudrala2016-03-30
| | | | | | | | | | | | | Check for handle ids when adding/deleting hash nodes OR adding/deleting filter entries and limit them to max number of links or header nodes supported(IXGBE_MAX_LINK_HANDLE). Start from bit 0 when setting hash table bit-map.(adapter->tables) Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: make __ixgbe_setup_tc staticEmil Tantilov2016-03-30
| | | | | | | | | | | This function is only used in ixgbe_main.c Resolves a "missing prototype" warning when building the driver with W=1 Reported-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbevf: fix error code path when setting MAC addressEmil Tantilov2016-03-30
| | | | | | | | | | | Return error when a MAC address change is rejected by the PF. This will prevent the user from modifying the MAC address when that operation is not permitted. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbevf: call ndo_stop() instead of dev_close() when running offline selftestStefan Assmann2016-03-30
| | | | | | | | | | | | | | Calling dev_close() causes IFF_UP to be cleared which will remove the interfaces routes and some addresses. That's probably not what the user intended when running the offline selftest. Besides this does not happen if the interface is brought down before the test, so the current behaviour is inconsistent. Instead call the net_device_ops ndo_stop function directly and avoid touching IFF_UP at all. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: call ndo_stop() instead of dev_close() when running offline selftestStefan Assmann2016-03-30
| | | | | | | | | | | | | | Calling dev_close() causes IFF_UP to be cleared which will remove the interfaces routes and some addresses. That's probably not what the user intended when running the offline selftest. Besides this does not happen if the interface is brought down before the test, so the current behaviour is inconsistent. Instead call the net_device_ops ndo_stop function directly and avoid touching IFF_UP at all. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Use udelay to avoid sleeping while atomicMark Rustad2016-03-30
| | | | | | | | | Use udelay instead of usleep_range because this can be called while a lock is held. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Fix ATR so that it correctly handles IPv6 extension headersAlexander Duyck2016-03-30
| | | | | | | | | | | | | | | | | | | | | The ATR code was assuming that it would be able to use tcp_hdr for every TCP frame that came through. However this isn't the case as it is possible for a frame to arrive that is TCP but sent through something like a raw socket. As a result the driver was setting up bad filters in which tcp_hdr was really pointing to the network header so the data was all invalid. In order to correct this I have added a bit of parsing logic that will determine the TCP header location based off of the network header and either the offset in the case of the IPv4 header, or a walk through the IPv6 extension headers until it encounters the header that indicates IPPROTO_TCP. In addition I have added checks to verify that the lowest protocol provided is recognized as IPv4 or IPv6 to help mitigate raw sockets using ETH_P_ALL from having ATR applied to them. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Store VXLAN port number in network orderAlexander Duyck2016-03-30
| | | | | | | | | | | | | | | | | | | | The VXLAN port number should be stored in network order instead of in host order as it is accessed from the hot-path in ATR. This way we can avoid having to do any byte swaps in order to validate the port number. I moved the vxlan_port value into a hole in the read-mostly region of the adapter struct. This way it should be in a warm cache-line instead of in some isolated region in memory when it needs to be accessed. In addition I went through and stripped a bunch of unneeded ifdef flags since having an extra variable present doesn't really hurt anything and makes the code easier to read. I also went through and dropped the NETIF_F_RXCSUM flag which was being set in hw_encap_features but provides no value as the flag is not evaluated in the Rx path. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Fix for RAR0 not being set to default MAC addrTushar Dave2016-03-30
| | | | | | | | | | | | | commit c9f53e63c208 ("ixgbe: Refactor MAC address configuration code") introduced code that doesn't set HW register RAR0 to default mac address but FF:FF:FF:FF:FF:FF. Due to this, ixgbe HW discards all incoming packets that doesn't have destination mac address equals to FF:FF:FF:FF:FF:FF. This commit sets RAR0 correctly to default HW mac address. Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Tested-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* Merge tag 'for-linus' of ↵Linus Torvalds2016-03-22
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull more rdma updates from Doug Ledford: "Round two of 4.6 merge window patches. This is a monster pull request. I held off on the hfi1 driver updates (the hfi1 driver is intimately tied to the qib driver and the new rdmavt software library that was created to help both of them) in my first pull request. The hfi1/qib/rdmavt update is probably 90% of this pull request. The hfi1 driver is being left in staging so that it can be fixed up in regards to the API that Al and yourself didn't like. Intel has agreed to do the work, but in the meantime, this clears out 300+ patches in the backlog queue and brings my tree and their tree closer to sync. This also includes about 10 patches to the core and a few to mlx5 to create an infrastructure for configuring SRIOV ports on IB devices. That series includes one patch to the net core that we sent to netdev@ and Dave Miller with each of the three revisions to the series. We didn't get any response to the patch, so we took that as implicit approval. Finally, this series includes Intel's new iWARP driver for their x722 cards. It's not nearly the beast as the hfi1 driver. It also has a linux-next merge issue, but that has been resolved and it now passes just fine. Summary: - A few minor core fixups needed for the next patch series - The IB SRIOV series. This has bounced around for several versions. Of note is the fact that the first patch in this series effects the net core. It was directed to netdev and DaveM for each iteration of the series (three versions total). Dave did not object, but did not respond either. I've taken this as permission to move forward with the series. - The new Intel X722 iWARP driver - A huge set of updates to the Intel hfi1 driver. Of particular interest here is that we have left the driver in staging since it still has an API that people object to. Intel is working on a fix, but getting these patches in now helps keep me sane as the upstream and Intel's trees were over 300 patches apart" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (362 commits) IB/ipoib: Allow mcast packets from other VFs IB/mlx5: Implement callbacks for manipulating VFs net/mlx5_core: Implement modify HCA vport command net/mlx5_core: Add VF param when querying vport counter IB/ipoib: Add ndo operations for configuring VFs IB/core: Add interfaces to control VF attributes IB/core: Support accessing SA in virtualized environment IB/core: Add subnet prefix to port info IB/mlx5: Fix decision on using MAD_IFC net/core: Add support for configuring VF GUIDs IB/{core, ulp} Support above 32 possible device capability flags IB/core: Replace setting the zero values in ib_uverbs_ex_query_device net/mlx5_core: Introduce offload arithmetic hardware capabilities net/mlx5_core: Refactor device capability function net/mlx5_core: Fix caching ATOMIC endian mode capability ib_srpt: fix a WARN_ON() message i40iw: Replace the obsolete crypto hash interface with shash IB/hfi1: Add SDMA cache eviction algorithm IB/hfi1: Switch to using the pin query function IB/hfi1: Specify mm when releasing pages ...
| * i40e: Add support for client interface for IWARP driverAnjali Singhai Jain2016-02-29
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds a Client interface for i40iw driver support. Also expands the Virtchannel to support messages from i40evf driver on behalf of i40iwvf driver. This client API is used by the i40iw and i40iwvf driver to access the core driver resources brokered by the i40e driver. Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2016-03-19
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: "Highlights: 1) Support more Realtek wireless chips, from Jes Sorenson. 2) New BPF types for per-cpu hash and arrap maps, from Alexei Starovoitov. 3) Make several TCP sysctls per-namespace, from Nikolay Borisov. 4) Allow the use of SO_REUSEPORT in order to do per-thread processing of incoming TCP/UDP connections. The muxing can be done using a BPF program which hashes the incoming packet. From Craig Gallek. 5) Add a multiplexer for TCP streams, to provide a messaged based interface. BPF programs can be used to determine the message boundaries. From Tom Herbert. 6) Add 802.1AE MACSEC support, from Sabrina Dubroca. 7) Avoid factorial complexity when taking down an inetdev interface with lots of configured addresses. We were doing things like traversing the entire address less for each address removed, and flushing the entire netfilter conntrack table for every address as well. 8) Add and use SKB bulk free infrastructure, from Jesper Brouer. 9) Allow offloading u32 classifiers to hardware, and implement for ixgbe, from John Fastabend. 10) Allow configuring IRQ coalescing parameters on a per-queue basis, from Kan Liang. 11) Extend ethtool so that larger link mode masks can be supported. From David Decotigny. 12) Introduce devlink, which can be used to configure port link types (ethernet vs Infiniband, etc.), port splitting, and switch device level attributes as a whole. From Jiri Pirko. 13) Hardware offload support for flower classifiers, from Amir Vadai. 14) Add "Local Checksum Offload". Basically, for a tunneled packet the checksum of the outer header is 'constant' (because with the checksum field filled into the inner protocol header, the payload of the outer frame checksums to 'zero'), and we can take advantage of that in various ways. From Edward Cree" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits) bonding: fix bond_get_stats() net: bcmgenet: fix dma api length mismatch net/mlx4_core: Fix backward compatibility on VFs phy: mdio-thunder: Fix some Kconfig typos lan78xx: add ndo_get_stats64 lan78xx: handle statistics counter rollover RDS: TCP: Remove unused constant RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket net: smc911x: convert pxa dma to dmaengine team: remove duplicate set of flag IFF_MULTICAST bonding: remove duplicate set of flag IFF_MULTICAST net: fix a comment typo ethernet: micrel: fix some error codes ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it bpf, dst: add and use dst_tclassid helper bpf: make skb->tc_classid also readable net: mvneta: bm: clarify dependencies cls_bpf: reset class and reuse major in da ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c ldmvsw: Add ldmvsw.c driver code ...
| * | net: relax setup_tc ndo op handle restrictionJohn Fastabend2016-03-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I added this check in setup_tc to multiple drivers, if (handle != TC_H_ROOT || tc->type != TC_SETUP_MQPRIO) Unfortunately restricting to TC_H_ROOT like this breaks the old instantiation of mqprio to setup a hardware qdisc. This patch relaxes the test to only check the type to make it equivalent to the check before I broke it. With this the old instantiation continues to work. A good smoke test is to setup mqprio with, # tc qdisc add dev eth4 root mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 \ queues 0@0 1@1 2@2 3@3 4@4 5@5 6@6 7@7 Fixes: e4c6734eaab9 ("net: rework ndo tc op to consume additional qdisc handle paramete") Reported-by: Singh Krishneil <krishneil.k.singh@intel.com> Reported-by: Jake Keller <jacob.e.keller@intel.com> CC: Murali Karicheri <m-karicheri2@ti.com> CC: Shradha Shah <sshah@solarflare.com> CC: Or Gerlitz <ogerlitz@mellanox.com> CC: Ariel Elior <ariel.elior@qlogic.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Bruce Allan <bruce.w.allan@intel.com> CC: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: cls_u32: move TC offload feature bit into cls_u32 offload logicJohn Fastabend2016-03-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the original series drivers would get offload requests for cls_u32 rules even if the feature bit is disabled. This meant the driver had to do a boiler plate check on the feature bit before adding/deleting the rule. This patch lifts the check into the core code and removes it from the driver specific case. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | igb: call ndo_stop() instead of dev_close() when running offline selftestStefan Assmann2016-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Calling dev_close() causes IFF_UP to be cleared which will remove the interfaces routes and some addresses. That's probably not what the user intended when running the offline selftest. Besides this does not happen if the interface is brought down before the test, so the current behaviour is inconsistent. Instead call the net_device_ops ndo_stop function directly and avoid touching IFF_UP at all. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | igb: Fix VLAN tag stripping on Intel i350Corinna Vinschen2016-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: When switching off VLAN offloading on an i350, the VLAN interface gets unusable. For testing, set up a VLAN on an i350 and some remote machine, e.g.: $ ip link add link eth0 name eth0.42 type vlan id 42 $ ip addr add 192.168.42.1/24 dev eth0.42 $ ip link set dev eth0.42 up Offloading is switched on by default: $ ethtool -k eth0 | grep vlan-offload rx-vlan-offload: on tx-vlan-offload: on $ ping -c 3 -I eth0.42 192.168.42.2 [...works as usual...] Now switch off VLAN offloading and try again: $ ethtool -K eth0 rxvlan off Actual changes: rx-vlan-offload: off tx-vlan-offload: off [requested on] $ ping -c 3 -I eth0.42 192.168.42.2 PING 192.168.42.2 (192.168.42.2) from 192.168.42.1 eth0.42: 56(84) bytes of da ta. --- 192.168.42.2 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 1999ms I can only reproduce it on an i350, the above works fine on a 82580. While inspecting the igb source, I came across the code in igb_set_vmolr which sets the E1000_VMOLR_STRVLAN/E1000_DVMOLR_STRVLAN flags once and for all, and in all of the igb code there's no other place where the STRVLAN is set or cleared. Thus, VLAN stripping is enabled in igb unconditionally, independently of the offloading setting. I compared that to the latest Intel igb-5.3.3.5 driver from http://sourceforge.net/projects/e1000/ which in fact sets and clears the STRVLAN flag independently from igb_set_vmolr in its own function igb_set_vf_vlan_strip, depending on the vlan settings. So I included the STRVLAN handling from the igb-5.3.3.5 driver into our current igb driver and tested the above scenario again. This time ping still works after switching off VLAN offloading. Tested on i350, with and without addtional VFs, as well as on 82580 successfully. Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | igbvf: remove "link is Up" message when registering mcast addressJon Maxwell2016-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A similar issue was addressed a few years ago in the following thread: http://www.spinics.net/lists/netdev/msg245877.html At that time there were concerns that removing this statement may cause other side effects. However the submitter addressed those concerns. But the dialogue went cold. We have a new case where a customers application is registering and un-registering multicast addresses every few seconds. This is leading to many "Link is Up" messages in the logs as a result of the "netif_carrier_off(netdev)" statement called by igbvf_msix_other(). Also on some kernels it is interfering with the bonding driver causing it to failover and subsequently affecting connectivity. The Sourgeforge driver does not make this call and is therefore not affected. If there were any side effects I would expect that driver to also be affected. I have tested re-loading the igbvf driver and downing the adapter with the PF entity on the host where the VM has this patch. When I bring it back up again connectivity is restored as expected. Therefore I request that this patch gets submitted. Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | igbvf: Add support for generic Tx checksumsAlexander Duyck2016-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for generic Tx checksums to the igbvf driver. It turns out this is actually pretty easy after going over the datasheet as we were doing a number of steps we didn't need to. In order to perform a Tx checksum for an L4 header we need to fill in the following fields in the Tx descriptor: MACLEN (maximum of 127), retrieved from: skb_network_offset() IPLEN (maximum of 511), retrieved from: skb_checksum_start_offset() - skb_network_offset() TUCMD.L4T indicates offset and if checksum or crc32c, based on: skb->csum_offset The added advantage to doing this is that we can support inner checksum offloads for tunnels and MPLS while still being able to transparently insert VLAN tags. I also took the opportunity to clean-up many of the feature flag configuration bits to make them a bit more consistent between drivers. In the case of the VF drivers this meant adding support for SCTP CRCs, and inner checksum offloads for MPLS and various tunnel types. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | igb: Add support for generic Tx checksumsAlexander Duyck2016-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for generic Tx checksums to the igb driver. It turns out this is actually pretty easy after going over the datasheet as we were doing a number of steps we didn't need to. In order to perform a Tx checksum for an L4 header we need to fill in the following fields in the Tx descriptor: MACLEN (maximum of 127), retrieved from: skb_network_offset() IPLEN (maximum of 511), retrieved from: skb_checksum_start_offset() - skb_network_offset() TUCMD.L4T indicates offset and if checksum or crc32c, based on: skb->csum_offset The added advantage to doing this is that we can support inner checksum offloads for tunnels and MPLS while still being able to transparently insert VLAN tags. I also took the opportunity to clean-up many of the feature flag configuration bits to make them a bit more consistent between drivers. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | igb: rename igb define to be more genericTodd Fujinaka2016-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | E1000_MRQC_ENABLE_RSS_4Q enables 4 and 8 queues depending on the part so rename to be generic. Similarly, E1000_MRQC_ENABLE_VMDQ_RSS_2Q has no numeric meaning so rename to be more generic. Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | igb: add conditions for I210 to generate periodic clock outputRoland Hii2016-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In general case the maximum supported half cycle time of the synchronized output clock is 70msec. Slower half cycle time than 70msec can be programmed also as long as the output clock is synchronized to whole seconds, useful specifically for generating a 1Hz clock. Permitted values for the clock half cycle time are: 125,000,000 decimal, 250,000,000 decimal and 500,000,000 decimal (equals to 125msec, 250msec and 500msec respectively). Before this patch, only the half cycle time of less than or equal to 70msec uses the I210 clock output function. This patch adds additional conditions when half cycle time is equal to 125msec or 250msec or 500msec to use clock output function. Under other conditions, interrupt driven target time output events method is still used to generate the desired clock output. Signed-off-by: Roland Hii <roland.king.guan.hii@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | igb: enable WoL for OEM devices regardless of EEPROM settingTodd Fujinaka2016-02-24
| | | | | | | | | | | | | | | | | | | | | | | | Override EEPROM settings for specific OEM devices. Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | igb: constify e1000_phy_operations structureJulia Lawall2016-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This e1000_phy_operations structure is never modified, so declare it as const. Other structures of this type are already const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | igb: When GbE link up, wait for Remote receiver status conditionTakuma Ueba2016-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I210 device IPv6 autoconf test sometimes fails, because DAD NS for link-local is not transmitted. This packet is silently dropped. This problem is seen only GbE environment. igb_watchdog_task link up detection continues to the following process. The following cases are observed: 1.PHY 1000BASE-T Status Register Remote receiver status bit is NG. (NG status becomes OK after about 200 - 700ms) 2.In this case, the transfer packet is silently dropped. 1000BASE-T Status register [Expected]: 0x3800 or 0x7800 [problem occurred]: 0x2800 or 0x6800 Frequency of occurrence: approx 1/10 - 1/40 observed In order to avoid this problem, wait until 1000BASE-T Status register "Remote receiver status OK" After applying this patch, at least 400 runs succeed with no problems. Signed-off-by: Takuma Ueba <t.ueba11@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | e1000e: Initial support for KabeLakeRaanan Avargil2016-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i219 (4) and i219 (5) are the next LOM generations that will be available on the next Intel platform (KabeLake). This patch provides the initial support for the devices. Signed-off-by: Raanan Avargil <raanan.avargil@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | e1000e: Clear ULP configuration register on ULP exitRaanan Avargil2016-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There have been bugs caused by HW ULP configuration settings not being properly cleared after cable connect in V-Pro capable systems. This caused HW to get out of sync occasionally. The fix ensures that ULP settings are cleared in HW after LAN cable re-connect. Signed-off-by: Raanan Avargil <raanan.avargil@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | e1000e: Set HW FIFO minimum pointer gap for non-gig speedsRaanan Avargil2016-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on feedback from HW team, the configured value of the internal PHY HW FIFO pointer gap was incorrect for non-gig speeds. This patch provides the correct configuration. Signed-off-by: Raanan Avargil <raanan.avargil@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | e1000e: Increase PHY PLL clock gate timingRaanan Avargil2016-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several packet loss issues were reported for which the root cause for them was an incorrect configuration of internal HW PHY clock gating mechanism by SW. This patch provides the correct mechanism. Signed-off-by: Raanan Avargil <raanan.avargil@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | e1000e: Increase ULP timerRaanan Avargil2016-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | Due to system level changes introduced in Skylake, ULP exit takes significantly longer to occur. Therefore, driver must wait longer for. Signed-off-by: Raanan Avargil <raanan.avargil@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | i40e/ethtool: support coalesce setting by queueKan Liang2016-02-19
| | | | | | | | | | | | | | | | | | | | | | | | This patch implements set_per_queue_coalesce for i40e driver. Signed-off-by: Kan Liang <kan.liang@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | i40e/ethtool: support coalesce getting by queueKan Liang2016-02-19
| | | | | | | | | | | | | | | | | | | | | | | | This patch implements get_per_queue_coalesce for i40e driver. Signed-off-by: Kan Liang <kan.liang@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | i40e: queue-specific settings for interrupt moderationKan Liang2016-02-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For i40e driver, each vector has its own ITR register. However, there are no concept of queue-specific settings in the driver proper. Only global variable is used to store ITR values. That will cause problems especially when resetting the vector. The specific ITR values could be lost. This patch move rx_itr_setting and tx_itr_setting to i40e_ring to store specific ITR register for each queue. i40e_get_coalesce and i40e_set_coalesce are also modified accordingly to support queue-specific settings. To make it compatible with old ethtool, if user doesn't specify the queue number, i40e_get_coalesce will return queue 0's value. While i40e_set_coalesce will apply value to all queues. Signed-off-by: Kan Liang <kan.liang@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | i40e/i40evf: Bump i40e to 1.4.25 and i40evf to 1.4.15Jesse Brandeburg2016-02-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | Bump. Change-ID: Ifa19aadaa892ad103f1b96fe2361fa690912c6a3 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | i40e: let go of the pastMitch Williams2016-02-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we reset a VF, its VSI goes away, and it gets a new one. So don't hang on to the now-stale local VSI pointer. It just leads to suffering and kernel panics. Change-ID: Ia8823b4e85893e95e963acee284968022b29177a Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | i40e: suspend scheduling during driver unloadPandi Kumar Maharajan2016-02-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to suspend scheduling or any pending service task during driver unload process, so that new task will not be scheduled. This patch sets the suspend flag bit during reload which avoids service task execution. Change-ID: I017c57b5d6656564556e3c5387da671369a572ac Signed-off-by: Pandi Kumar Maharajan <pandi.maharajan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | i40e: Use the new rx ctl register helpers. Don't use AQ calls from clear_hw.Shannon Nelson2016-02-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the new AdminQ functions for safely accessing the Rx control registers that may be affected by heavy small packet traffic. We can't use AdminQ calls in i40e_clear_hw() because the HW is being initialized and the AdminQ is not alive. We recently added an AQ related replacement for reading PFLAN_QALLOC, and this patch puts back the original register read. Change-ID: Ib027168c954a5733299aa3a4ce5f8218c6bb5636 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | i40e: implement and use Rx CTL helper functionsShannon Nelson2016-02-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the new AdminQ functions for safely accessing the Rx control registers that may be affected by heavy small packet traffic. Change-ID: Ibb00983e8dcba71f4b760222a609a5fcaa726f18 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | i40e: add adminq commands for Rx CTL registersShannon Nelson2016-02-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the new opcodes and struct used for asking the firmware to update Rx control registers that need extra care when being accessed while under heavy traffic - e.g. sustained 64byte packets at line rate on all ports. The firmware will take extra steps to be sure the register accesses are successful. The registers involved are: PFQF_CTL_0 PFQF_HENA PFQF_FDALLOC PFQF_HREGION PFLAN_QALLOC VPQF_CTL VFQF_HENA VFQF_HREGION VSIQF_CTL VSILAN_QBASE VSILAN_QTABLE VSIQF_TCREGION PFQF_HKEY VFQF_HKEY PRTQF_CTL_0 GLFCOE_RCTL GLFCOE_RSOF GLQF_CTL GLQF_SWAP GLQF_HASH_MSK GLQF_HASH_INSET GLQF_HSYM GLQF_FC_MSK GLQF_FC_INSET GLQF_FD_MSK PRTQF_FD_INSET PRTQF_FD_FLXINSET PRTQF_FD_MSK Change-ID: I56c8144000da66ad99f68948d8a184b2ec2aeb3e Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.2 (git 2.25.0) at 2025-08-05 03:40:38 -0400