aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/broadcom
Commit message (Collapse)AuthorAge
* net: bcmgenet: fix dma api length mismatchEric Dumazet2016-03-18
| | | | | | | | | | | | | | When un-mapping skb->data in __bcmgenet_tx_reclaim(), we must use the length that was used in original dma_map_single(), instead of skb->len that might be bigger (includes the frags) We simply can store skb_len into tx_cb_ptr->dma_len and use it at unmap time. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Prevent false warning for lack of FC NPIVYuval Mintz2016-03-18
| | | | | | | | | | | | | Not all adapters have FC-NPIV configured. If bnx2fc is used with such an adapter, driver would read irrelevant data from the the nvram and log "FC-NPIV table with bad length..." In system logs. Simply accept that reading '0' as the feature offset in nvram indicates the feature isn't there and return. Reported-by: Andrew Patterson <andrew.patterson@hpe.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: don't wait for Tx completion on recoveryYuval Mintz2016-03-16
| | | | | | | | | | | | | When driver has hit a parity event, HW can no longer write to host memory. As a result, Tx completions cannot be written to the host SB memory, and waiting for Tx completions eventually timeout. As driver is willing to delay as much as 1-2 seconds per Tx queue for its draining and this delay is sequential, the time to recover might greatly lengthen needlessly in case the recovery is done under multi-connection traffic. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnxt_en: Enable AER support.Satish Baddipadige2016-03-08
| | | | | | | | | Add pci_error_handler callbacks to support for pcie advanced error recovery. Signed-off-by: Satish Baddipadige <sbaddipa@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnxt_en: Include hardware port statistics in ethtool -S.Michael Chan2016-03-08
| | | | | | | Include the more useful port statistics in ethtool -S for the PF device. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnxt_en: Include some hardware port statistics in ndo_get_stats64().Michael Chan2016-03-08
| | | | | | | | Include some of the port error counters (e.g. crc) in ->ndo_get_stats64() for the PF device. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnxt_en: Add port statistics support.Michael Chan2016-03-08
| | | | | | | | | Gather periodic port statistics if the device is PF and link is up. This is triggered in bnxt_timer() every one second to request firmware to DMA the counters. Signed-off-by: Michael Chan <michael.chan@broadocm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnxt_en: Extend autoneg to all speeds.Michael Chan2016-03-08
| | | | | | | | | | | | Allow all autoneg speeds aupported by firmware to be advertised. If the advertising parameter is 0, then all supported speeds will be advertised. Remove BNXT_ALL_COPPER_ETHTOOL_SPEED which is no longer used as all supported speeds can be advertised. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnxt_en: Use common function to get ethtool supported flags.Michael Chan2016-03-08
| | | | | | | | | | | | The supported bits and advertising bits in ethtool have the same definitions. The same is true for the firmware bits. So use the common function to handle the conversion for both supported and advertising bits. v2: Don't use parentheses on function return. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnxt_en: Add reporting of link partner advertisement.Michael Chan2016-03-08
| | | | | | | | And report actual pause settings to ETHTOOL_GPAUSEPARAM to let ethtool resolve the actual pause settings. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnxt_en: Refactor bnxt_fw_to_ethtool_advertised_spds().Michael Chan2016-03-08
| | | | | | | | | Include the conversion of pause bits and add one extra call layer so that the same refactored function can be reused to get the link partner advertisement bits. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2016-03-08
|\ | | | | | | | | | | | | | | Several cases of overlapping changes, as well as one instance (vxlan) of a bug fix in 'net' overlapping with code movement in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnx2x: fix indentation in bnx2x_sp_task()Michal Schmidt2016-03-02
| | | | | | | | | | | | | | Fix a case of misleading code indentation. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnx2x: define event data reserved fields as little-endianMichal Schmidt2016-03-02
| | | | | | | | | | | | | | | | | | For consistency with other event data structs and to lessen the chance of a mistake should one of the reserved fields become used in the future, define the reserved fields as little-endian. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnx2x: define fields of struct cfc_del_event_data as little-endianMichal Schmidt2016-03-02
| | | | | | | | | | | | | | | | | | There were no missing endianness conversions in this case, but the fields of struct cfc_del_event_data should be defined as little-endian to get rid of the ugly (__force __le32) casts. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnx2x: access cfc_del_event only if the opcode is CFC_DELMichal Schmidt2016-03-02
| | | | | | | | | | | | | | | | | | | | It's not really a bug, but it was odd that bnx2x_eq_int() read the message data as if it were a cfc_del_event regardless of the event type. It's cleaner to access only the appropriate member of union event_data after checking the event opcode. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnx2x: fix receive of VF->PF mailbox messages by the PF on big-endianMichal Schmidt2016-03-02
| | | | | | | | | | | | | | | | | | On ppc64 the PF did not receive messages from VFs correctly. Fields of struct vf_pf_event_data are little-endian. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnx2x: fix sending VF->PF messages on big-endianMichal Schmidt2016-03-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When a VF is sending a message to the PF, it needs to trigger the PF to tell it the message is ready. The trigger did not work on ppc64. No interrupt appeared in the PF. The bug is due to confusion about the layout of struct trigger_vf_zone. In bnx2x_send_msg2pf() the trigger is written using writeb(), not writel(), so the attempt to define the struct with a reversed layout on big-endian is counter-productive. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnx2x: fix crash on big-endian when adding VLANMichal Schmidt2016-03-02
| | | | | | | | | | | | | | | | | | | | | | | | | | bnx2x crashes during the initialization of the 8021q module on ppc64. The bug is a missing conversion from le32 in bnx2x_handle_classification_eqe() when obtaining the cid value from struct eth_event_data. The fields in struct eth_event_data should all be declared as little-endian and conversions added where missing. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnxt_en: Fix zero padding of tx push data.Michael Chan2016-02-23
| | | | | | | | | | | | | | | | | | | | | | | | | | The arithmetic to zero pad the last 64-bit word in the push buffer is not correct. 1. It should be pdata + length to get to the end. 2. 'pdata' is void pointer and passing it to PTR_ALIGN() will cast the aligned pointer to void. Pass 'end' which is u64 pointer to PTR_ALIGN() instead so that the aligned pointer - 1 is the last 64-bit pointer to data. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: relax setup_tc ndo op handle restrictionJohn Fastabend2016-03-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I added this check in setup_tc to multiple drivers, if (handle != TC_H_ROOT || tc->type != TC_SETUP_MQPRIO) Unfortunately restricting to TC_H_ROOT like this breaks the old instantiation of mqprio to setup a hardware qdisc. This patch relaxes the test to only check the type to make it equivalent to the check before I broke it. With this the old instantiation continues to work. A good smoke test is to setup mqprio with, # tc qdisc add dev eth4 root mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 \ queues 0@0 1@1 2@2 3@3 4@4 5@5 6@6 7@7 Fixes: e4c6734eaab9 ("net: rework ndo tc op to consume additional qdisc handle paramete") Reported-by: Singh Krishneil <krishneil.k.singh@intel.com> Reported-by: Jake Keller <jacob.e.keller@intel.com> CC: Murali Karicheri <m-karicheri2@ti.com> CC: Shradha Shah <sshah@solarflare.com> CC: Or Gerlitz <ogerlitz@mellanox.com> CC: Ariel Elior <ariel.elior@qlogic.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Bruce Allan <bruce.w.allan@intel.com> CC: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnxt_en: Add hwrm_send_message_silent().Michael Chan2016-03-01
| | | | | | | | | | | | | | | | | | This is used to send NVM_FIND_DIR_ENTRY messages which can return error if the entry is not found. This is normal and the error message will cause unnecessary alarm, so silence it. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnxt_en: Refactor _hwrm_send_message().Michael Chan2016-03-01
| | | | | | | | | | | | | | | | | | Add a new function bnxt_do_send_msg() to do essentially the same thing with an additional paramter to silence error response messages. All current callers will set silent to false. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnxt_en: Add installed-package firmware version reporting via Ethtool GDRVINFORob Swindell2016-03-01
| | | | | | | | | | | | | | | | | | For everything to fit, we remove the PHY microcode version and replace it with the firmware package version in the fw_version string. Signed-off-by: Rob Swindell <swindell@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnxt_en: Fix dmesg log firmware error messages.Michael Chan2016-03-01
| | | | | | | | | | | | | | | | | | | | | | | | Use appropriate firmware request header structure to prepare the firmware messages. This avoids the unnecessary conversion of the fields to 32-bit fields. Add appropriate endian conversion when printing out the message fields in dmesg so that they appear correct in the log. Reported-by: Rob Swindell <swindell@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnxt_en: Use firmware provided message timeout value.Michael Chan2016-03-01
| | | | | | | | | | | | | | | | | | | | | | | | | | Before this patch, we used a hardcoded value of 500 msec as the default value for firmware message response timeout. For better portability with future hardware or debug platforms, use the value provided by firmware in the first response and store it for all susequent messages. Redefine the macro HWRM_CMD_TIMEOUT to the stored value. Since we don't have the value yet in the first message, use the 500 ms default if the stored value is zero. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnxt_en: Add coalescing support for tx rings.Michael Chan2016-03-01
| | | | | | | | | | | | | | | | | | | | | | When tx and rx rings don't share the same completion ring, tx coalescing parameters can be set differently from the rx coalescing parameters. Otherwise, use rx coalescing parameters on shared completion rings. Adjust rx coalescing default values to lower interrupt rate. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnxt_en: Refactor bnxt_hwrm_set_coal().Michael Chan2016-03-01
| | | | | | | | | | | | | | | | | | | | Add a function to set all the coalescing parameters. The function can be used later to set both rx and tx coalescing parameters. v2: Fixed function parameters formatting requested by DaveM. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnxt_en: Store irq coalescing timer values in micro seconds.Michael Chan2016-03-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Don't convert these to internal hardware tick values before storing them. This avoids the confusion of ethtool -c returning slightly different values than the ones set using ethtool -C when we convert hardware tick values back to micro seconds. Add better comments for the hardware settings. Also, rename the current set of coalescing fields with rx_ prefix. The next patch will add support of tx coalescing values. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnxt_en: Send PF driver unload notification to all VFs.Jeffrey Huang2016-03-01
| | | | | | | | | | | | | | | | | | | | | | | | | | During remove_one() when SRIOV is enabled, the PF driver should broadcast PF driver unload notification to all VFs that are attached to VMs. Upon receiving the PF driver unload notification, the VF driver should print a warning message to message log. Certain operations on the VF may not succeed after the PF has unloaded. Signed-off-by: Jeffrey Huang <huangjw@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnxt_en: Improve bnxt_vf_update_mac().Jeffrey Huang2016-03-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow the VF to setup its own MAC address if the PF has not administratively set it for the VF. To do that, we should always store the MAC address from the firmware. There are 2 cases: 1. The MAC address is valid. This MAC address is assigned by the PF and it needs to override the current VF MAC address. 2. The MAC address is zero. The VF will use a random MAC address by default. By storing this 0 MAC address in the VF structure, it will allow the VF user to change the MAC address later using ndo_set_mac_address() when it sees that the stored MAC address is 0. v2: Expanded descriptions and added more comments. Signed-off-by: Jeffrey Huang <huangjw@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: add a separate GENEVE Kconfig symbolArnd Bergmann2016-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When CONFIG_GENEVE is built as a loadable module, and bnx2x is built-in, we get this link error: drivers/net/built-in.o: In function `bnx2x_open': :(.text+0x33322): undefined reference to `geneve_get_rx_port' drivers/net/built-in.o: In function `bnx2x_sp_rtnl_task': :(.text+0x3e632): undefined reference to `geneve_get_rx_port' This avoids the problem by adding a separate Kconfig symbol named CONFIG_BNX2X_GENEVE that is only enabled when the code is reachable from the driver. This is the same trick that BNX2X does for VXLAN support, and is similar to how I40E handles both. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 883ce97d25b0 ("bnx2x: Add Geneve inner-RSS support") Acked-By: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bgmac: support Ethernet device on BCM47094 SoCRafał Miłecki2016-02-24
| | | | | | | | | | | | | | | | It needs very similar workarounds to the one on BCM4707. It was tested on D-Link DIR-885L home router. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2016-02-23
|\| | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/phy/bcm7xxx.c drivers/net/phy/marvell.c drivers/net/vxlan.c All three conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnx2x: Fix 84833 phy command handlerYuval Mintz2016-02-21
| | | | | | | | | | | | | | | | Current initialization sequence is lacking, causing some configurations to fail. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnx2x: Fix led setting for 84858 phy.Yuval Mintz2016-02-21
| | | | | | | | | | Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnx2x: Correct 84858 PHY fw versionYuval Mintz2016-02-21
| | | | | | | | | | | | | | | | The phy's firmware version isn't being parsed properly as it's currently parsed like the rest of the 848xx phys. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnx2x: Fix 84833 RX CRCYuval Mintz2016-02-21
| | | | | | | | | | | | | | | | | | There's a problem in current 84833 phy configuration - in case 1Gb link is configured and jumbo-sized packets are being used, device will experience RX crc errors. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnx2x: Fix link-forcing for KR2Yuval Mintz2016-02-21
| | | | | | | | | | | | | | | | Currently, when link is using KR2 it cannot be forced to any speed other than 20g. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.om> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: bcmgenet: Fix internal PHY link stateJaedon Shin2016-02-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PHY link state is not chaged in GENETv2 caused by the previous commit 49f7a471e4d1 ("net: bcmgenet: Properly configure PHY to ignore interrupt") was set to PHY_IGNORE_INTERRUPT in bcmgenet_mii_probe(). The internal PHY should use phy_mac_interrupt() when not in use PHY_POLL. The statement for phy_mac_interrupt() has two conditions. The first condition to check GENET_HAS_MDIO_INTR is not related PHY link state, so this patch removes it. Fixes: 49f7a471e4d1 ("net: bcmgenet: Properly configure PHY to ignore interrupt") Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnxt_en: Failure to update PHY is not fatal condition.Michael Chan2016-02-19
| | | | | | | | | | | | | | | | | | If we fail to update the PHY, we should print a warning and continue. The current code to exit is buggy as it has not freed up the NIC resources yet. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnxt_en: Remove unnecessary call to update PHY settings.Michael Chan2016-02-19
| | | | | | | | | | | | | | | | | | | | Fix bnxt_update_phy_setting() to check the correct parameters when determining whether to update the PHY. Requested line speed/duplex should only be checked for forced speed mode. This avoids unnecessary link interruptions when loading the driver. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnxt_en: Poll link at the end of __bnxt_open_nic().Michael Chan2016-02-19
| | | | | | | | | | | | | | | | | | | | | | | | When shutting down the NIC, we shutdown async event processing before freeing all the rings. If there is a link change event during reset, the driver may miss it and the link state may be incorrect after the NIC is re-opened. Poll the link at the end of __bnxt_open_nic() to get the correct link status. Signed-off-by Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnxt_en: Reduce default ring sizes.Michael Chan2016-02-16
| | | | | | | | | | | | | | | | | | | | The current default tx ring size of 512 causes an extra page to be allocated for the tx ring with only 1 entry in it. Reduce it to 511. The default rx ring size is also reduced to 511 to use less memory by default. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnxt_en: Fix implementation of tx push operation.Michael Chan2016-02-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | tx push is supported for small packets to reduce DMA latency. The following bugs are fixed in this patch: 1. Fix the definition of the push BD which is different from the DMA BD. 2. The push buffer has to be zero padded to the next 64-bit word boundary or tx checksum won't be correct. 3. Increase the tx push packet threshold to 164 bytes (192 bytes with the BD) so that small tunneled packets are within the threshold. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnxt_en: Remove 20G support and advertise only 40GbaseCR4.Michael Chan2016-02-16
| | | | | | | | | | | | | | | | 20G is not supported by production hardware and only the 40GbaseCR4 standard is supported. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnxt_en: Cleanup and Fix flow control setup logicMichael Chan2016-02-16
| | | | | | | | | | | | | | | | | | | | | | | | Cleanup bnxt_probe_phy() to cleanly separate 2 code blocks for autoneg on and off. Autoneg flow control is possible only if autoneg is enabled. In bnxt_get_settings(), Pause and Asym_Pause are always supported. Only the advertisement bits change depending on the ethtool -A setting in auto mode. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnxt_en: Fix ethtool autoneg logic.Michael Chan2016-02-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Determine autoneg on|off setting from link_info->autoneg. Using the firmware returned setting can be misleading if autoneg is changed and there hasn't been a phy update from the firmware. 2. If autoneg is disabled, link_info->autoneg should be set to 0 to indicate both speed and flow control autoneg are disabled. 3. To enable autoneg flow control, speed autoneg must be enabled. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * tg3: Fix for tg3 transmit queue 0 timed out when too many gso_segsSiva Reddy Kallam2016-02-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tg3_tso_bug() can hit a condition where the entire tx ring is not big enough to segment the GSO packet. For example, if MSS is very small, gso_segs can exceed the tx ring size. When we hit the condition, it will cause tx timeout. tg3_tso_bug() is called to handle TSO and DMA hardware bugs. For TSO bugs, if tg3_tso_bug() cannot succeed, we have to drop the packet. For DMA bugs, we can still fall back to linearize the SKB and let the hardware transmit the TSO packet. This patch adds a function tg3_tso_bug_gso_check() to check if there are enough tx descriptors for GSO before calling tg3_tso_bug(). The caller will then handle the error appropriately - drop or lineraize the SKB. v2: Corrected patch description to avoid confusion. Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: Add missing HSI for big-endian machinesYuval Mintz2016-02-18
| | | | | | | | | | | | | | | | | | | | Commit e5d3a51cefbb ("bnx2x: extend DCBx support") was missing HSI changes for big-endian machine, breaking compilation on such platforms. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.2 (git 2.25.0) at 2025-08-06 22:54:11 -0400