aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mmc
Commit message (Collapse)AuthorAge
...
| * mmc: sh_mmcif: Inform the mmc core about the max busy timeoutUlf Hansson2016-07-25
| | | | | | | | | | | | | | | | The sh_mmcif driver is already using a 10s request timeout. Let's also inform the mmc core about this value, as there are situations when it needs to know about it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: sh_mmcif: Use response type to know when to enable busy detectionUlf Hansson2016-07-25
| | | | | | | | | | | | | | | | | | | | | | | | | | The sh_mmcif explicity checks for certain commands to decide when to enable HW busy detection. Instead, it should only check the response type as it tells if busy detection is needed. In this way, the mmc core also gets full control whether it thinks busy detection should be done or not. In some specific scenarios, like for ERASE and STOP commands it may decide to fall back to use a CMD13 to poll the card status instead. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: sh_mmcif: Enable MMC_CAP2_NO_SD and MMC_CAP2_NO_SDIOUlf Hansson2016-07-25
| | | | | | | | | | | | | | | | Enable the capabilities which tells the mmc core to prevent sending SD and SDIO commands during card initialization. In this way, we can also remove the validation of non-supported commands in the ->request() callback. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: core: Allow hosts to specify non-support for SD commandsUlf Hansson2016-07-25
| | | | | | | | | | | | | | | | | | | | | | There are host drivers which needs to valdiate for non-supported SD commands and returnn error code for such requests. To improve and simplify the behaviour, let's invent MMC_CAP2_NO_SD which these host drivers can set to tell the mmc core to skip sending SD commands during card initialization. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: sdhci-msm: fix spelling mistake: "Perpheral" -> "Peripheral"Colin Ian King2016-07-25
| | | | | | | | | | | | | | | | trivial fix to spelling mistake in dev_err message Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: sdhci: use pr_err for sdhci_dumpregsChuanxiao Dong2016-07-25
| | | | | | | | | | | | | | | | | | | | sdhci_dumpregs is used to dump registers when error happens. Thus it should use pr_err instead of pr_debug to show more information about the hardware. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> [Fix whitespace and checkpatch warnings] Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: host: use the defined function to check whether card is removableJaehoon Chung2016-07-25
| | | | | | | | | | | | | | | | | | In linux/mmc/host.h, mmc_card_is_removable() is already defined. It should be maintainted more easier than now. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: sdhci-of-arasan: Add ability to export card clockDouglas Anderson2016-07-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some SD/eMMC PHYs (like the PHY from Arasan that is designed to work with arasan,sdhci-5.1) need to know the card clock in order to function properly. Let's add the ability to expose this clock. Any PHY that needs to know the clock rate can add a reference and query the clock rate. At the moment we register a CLK_GET_RATE_NOCACHE clock that simply allows querying the clock. This allows us to be less intrusive with regards to the main SDHCI driver, which has complex logic for adjusting the SD clock. Right now we always fully power cycle the PHY when the clock changes and that gives the PHY a good chance to query our clock. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: sdhci-of-arasan: Properly set corecfg_baseclkfreq on rk3399Douglas Anderson2016-07-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the the earlier change in this series ("Documentation: mmc: sdhci-of-arasan: Add soc-ctl-syscon for corecfg regs") we can see the mechansim for specifying a syscon to properly set corecfg registers in sdhci-of-arasan. Now let's use this mechanism to properly set corecfg_baseclkfreq on rk3399. >From [1] the corecfg_baseclkfreq is supposed to be set to: Base Clock Frequency for SD Clock. This is the frequency of the xin_clk. This is a relatively easy thing to do. Note that we assume that xin_clk is not dynamic and we can check the clock at probe time. If any real devices have a dynamic xin_clk future patches could register for notifiers for the clock. At the moment, setting corecfg_baseclkfreq is only supported for rk3399 since we need a specific map for each implementation. The code is written in a generic way that should make this easy to extend to other SoCs. Note that a specific compatible string for rk3399 is already in use and so we add that to the table to match rk3399. [1]: https://arasan.com/wp-content/media/eMMC-5-1-Total-Solution_Rev-1-3.pdf Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: sdhci-of-arasan: Always power the PHY off/on when clock changesDouglas Anderson2016-07-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit 802ac39a5566 ("mmc: sdhci-of-arasan: fix set_clock when a phy is supported") we added code to power the PHY off and on whenever the clock was changed but we avoided doing the power cycle code when the clock was low speed. Let's now do it always. Although there may be other reasons for power cycling the PHY when the clock changes, one of the main reasons is that we need to give the DLL a chance to re-lock with the new clock. One of the things that the DLL is for is tuning the Receive Clock in HS200 mode and STRB in HS400 mode. Thus it is clear that we should make sure we power cycle the PHY (and wait for the DLL to lock) when we know we'll be in one of these two speed modes. That's what the original code did, though it used the clock rate rather than the speed mode. However, even in speed modes other than HS200,/HS400 the DLL is used for something since it can be clearly observed that the PHY doesn't function properly if you leave the DLL off. Although it appears less important to power cycle the PHY and wait for the DLL to lock when not in HS200/HS400 modes (no bugs were reported), it still seems wise to let the locking always happen nevertheless. Note: as part of this, we make sure that we never try to turn the PHY on when the clock is off (when the clock rate is 0). The PHY cannot work when the clock is off since its DLL can't lock. This change requires ("phy: rockchip-emmc: Increase lock time allowance") and will cause problems if picked without that change. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: sdhci-brcmstb: Add driver for Broadcom BRCMSTB SoCsAl Cooper2016-07-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add SDHCI driver for Broadcom BRCMSTB SoCs. This driver works with all ARM based SoCs and the 7425, 7429 and 7435 MIPS based SoCs. The driver disables all UHS speed modes by default and relies on the Device Tree node properties to enable these modes for SoC/Board combinations that support them. Signed-off-by: Al Cooper <alcooperx@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: block: Fix tag condition with packed writesAdrian Hunter2016-07-25
| | | | | | | | | | | | | | | | | | Apparently a cut-and-paste error, 'do_data_tag' is using 'brq' for data size even though 'brq' has not been set up. Instead use blk_rq_sectors(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: core: Disable HPI for certain Hynix eMMC cardsPratibhasagar V2016-07-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Certain Hynix eMMC 4.41 cards might get broken when HPI feature is used and hence this patch disables the HPI feature for such buggy cards. As some of the other features like BKOPs/Cache/Sanitize are dependent on HPI feature, those features would also get disabled if HPI is disabled. Signed-off-by: Pratibhasagar V <pratibha@codeaurora.org> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> [gdavis: Forward port and cleanup] Signed-off-by: George G. Davis <george_davis@mentor.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: core: Only change mode if mmc_select_bus_width() is successfulPeter Griffin2016-07-25
| | | | | | | | | | | | | | | | | | mmc_select_bus_width() returns bus width (4 or 8) on success or zero if unsupported. So only change mode if setting the bus width is successful. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: Set pref erase size based on sizeGwendal Grignou2016-07-25
| | | | | | | | | | | | | | | | | | | | | | | | | | If available, eMMC stack uses HC_ERASE_GRP_SIZE as the preferred erase size. As some high capacity eMMC (64MB) reports this size to 512kB, the discard operations end up taking very long time. Improve the behaviour by instead calculating the preferred erase size based on the eMMC size. In this way the discard operations becomes faster. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> [Ulf: Updated changelog and improved comment in code] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: sdhci-bcm2835: remove driverStefan Wahren2016-07-25
| | | | | | | | | | | | | | | | | | The sdhci-bcm2835 is no more needed since it has been replaced by sdhci-iproc. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: mmc: Fix HS switch failure in mmc_select_hs400()Ziyuan Xu2016-07-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To slove the issue which was found on gru board for hs400. [ 4.616946] sdhci: Secure Digital Host Controller Interface driver [ 4.623135] sdhci: Copyright(c) Pierre Ossman [ 4.722575] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.730962] sdhci-arasan fe330000.sdhci: No vmmc regulator found [ 4.737444] sdhci-arasan fe330000.sdhci: No vqmmc regulator found [ 4.774930] mmc0: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA [ 4.980295] mmc0: switch to high-speed from hs200 failed, err:-84 [ 4.986487] mmc0: error -84 whilst initialising MMC card We should change HS400 mode selection timing to meet JEDEC specification. The JEDEC 5.1 said that change the frequency to <= 52MHZ after HS_TIMING switch. Refer to section 6.6.2.3 "HS400" timing mode selection: Set the "Timing Interface" parameter in the HS_TIMING[185] field of the Extended CSD register to 0x1 to switch to High Speed mode and then set the clock frequency to a value not greater than 52MHZ. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: mmc: fix switch timeout issue caused by jiffies precisionChaotian Jing2016-07-25
| | | | | | | | | | | | | | | | | | with CONFIG_HZ=100, the precision of jiffies is 10ms, and the generic_cmd6_time of some card is also 10ms. then, may be current time is only 5ms, but already timed out caused by jiffies precision. Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: mmc: do not use CMD13 to get status after speed mode switchChaotian Jing2016-07-25
| | | | | | | | | | | | | | | | | | | | | | | | | | Per JEDEC spec, it is not recommended to use CMD13 to get card status after speed mode switch. below are two reason about this: 1. CMD13 cannot be guaranteed due to the asynchronous operation. Therefore it is not recommended to use CMD13 to check busy completion of the timing change indication. 2. After switch to HS200, CMD13 will get response of 0x800, and even the busy signal gets de-asserted, the response of CMD13 is aslo 0x800. Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: mmc: Use ->card_busy() to detect busy cards in __mmc_switch()Chaotian Jing2016-07-25
| | | | | | | | | | | | | | | | | | Some MMC hosts do not support MMC_CAP_WAIT_WHILE_BUSY, but implements the ->card_busy() callback. In such cases, extend __mmc_switch() to use this method to check card status after switch command. Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: sdhci: Fix sdhci_card_busy()Adrian Hunter2016-07-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | host->card_busy() was introduced for SD voltage switching which checks all 4 data lines. Increasingly, host->card_busy is being used to poll the the busy signal which is only data line 0 (DAT[0]). The current logic in sdhci_card_busy() does not work in that case because it returns false if any of the data lines is high. It also ignores possibilities: - data lines 1-3 are not connected and could show at any level - data lines 1-2 can be used by SDIO for other purposes According to the SD specification, it is OK to check any of the data lines for voltage switching, so change to use DAT[0] only. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: tmio: make a cast explicitWolfram Sang2016-07-25
| | | | | | | | | | | | | | | | Sparse complains about the implicit cast. Making it explicit is indeed better coding style. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: sdhci-of-arasan: implement enhanced strobe callbackShawn Lin2016-07-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently sdhci-arasan 5.1 can support enhanced strobe function, and we now limit it just for "arasan,sdhci-5.1". Add mmc-hs400-enhanced-strobe in DT to enable the function if we're sure our controller can support it. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: debugfs: add HS400 enhanced strobe descriptionShawn Lin2016-07-25
| | | | | | | | | | | | | | | | | | | | | | | | We introduce HS400 with enhanced strobe function, so we need to add it for debug show. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: core: implement enhanced strobe supportShawn Lin2016-07-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Controllers use data strobe line to latch data from devices under hs400 mode, but not for cmd line. So since emmc 5.1, JEDEC introduces enhanced strobe mode for latching cmd response from emmc devices to host controllers. This new feature is optional, so it depends both on device's cap and host's cap to decide whether to use it or not. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Douglas Anderson <dianders@chromium.org> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: core: add mmc-hs400-enhanced-strobe supportShawn Lin2016-07-25
| | | | | | | | | | | | | | | | | | | | | | | | This patch introduce mmc-hs400-enhanced-strobe for platforms which want to enable enhanced strobe function from DT if the mmc host controller claims to support enhanced strobe. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: sdhci: fix wakeup configurationLudovic Desroches2016-07-25
| | | | | | | | | | | | | | | | | | | | | | Activating wakeup event is not enough to get a wakeup signal. The corresponding events have to be enabled in the Interrupt Status Enable Register too. It follows the specification and is needed at least by sdhci-of-at91. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: block: correct 4KB alignment checkYuan, Juntao2016-07-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In sectors alignment check, brq->data.blocks means sectors of the previous mqrq since data.blocks for mqrq_cur hasn't been updated yet. data.blocks will be updated later in mmc_blk_packed_hdr_wrq_prep or mmc_blk_rw_rq_prep. static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, ...... ...... struct mmc_blk_request *brq = &mq->mqrq_cur->brq; Signed-off-by: Yuan Juntao <juntao.yuan@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: sdhci: remove comment regarding timeout during tuningSimon Horman2016-07-25
| | | | | | | | | | | | | | | | | | Since commit 7ce45e950624 ("mmc: sdhci: SD tuning is broken for some controllers") sdhci_execute_tuning() no longer includes a timeout in its loop counter(s) so remove portion of the comment regarding this. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: sh_mobile_sdhi: properly document R-Car versionsWolfram Sang2016-07-25
| | | | | | | | | | | | | | | | | | Replace hardcoded values with meaningful names and document what we know. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | Merge branch 'for-4.8/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds2016-07-26
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block driver updates from Jens Axboe: "This branch also contains core changes. I've come to the conclusion that from 4.9 and forward, I'll be doing just a single branch. We often have dependencies between core and drivers, and it's hard to always split them up appropriately without pulling core into drivers when that happens. That said, this contains: - separate secure erase type for the core block layer, from Christoph. - set of discard fixes, from Christoph. - bio shrinking fixes from Christoph, as a followup up to the op/flags change in the core branch. - map and append request fixes from Christoph. - NVMeF (NVMe over Fabrics) code from Christoph. This is pretty exciting! - nvme-loop fixes from Arnd. - removal of ->driverfs_dev from Dan, after providing a device_add_disk() helper. - bcache fixes from Bhaktipriya and Yijing. - cdrom subchannel read fix from Vchannaiah. - set of lightnvm updates from Wenwei, Matias, Johannes, and Javier. - set of drbd updates and fixes from Fabian, Lars, and Philipp. - mg_disk error path fix from Bart. - user notification for failed device add for loop, from Minfei. - NVMe in general: + NVMe delay quirk from Guilherme. + SR-IOV support and command retry limits from Keith. + fix for memory-less NUMA node from Masayoshi. + use UINT_MAX for discard sectors, from Minfei. + cancel IO fixes from Ming. + don't allocate unused major, from Neil. + error code fixup from Dan. + use constants for PSDT/FUSE from James. + variable init fix from Jay. + fabrics fixes from Ming, Sagi, and Wei. + various fixes" * 'for-4.8/drivers' of git://git.kernel.dk/linux-block: (115 commits) nvme/pci: Provide SR-IOV support nvme: initialize variable before logical OR'ing it block: unexport various bio mapping helpers scsi/osd: open code blk_make_request target: stop using blk_make_request block: simplify and export blk_rq_append_bio block: ensure bios return from blk_get_request are properly initialized virtio_blk: use blk_rq_map_kern memstick: don't allow REQ_TYPE_BLOCK_PC requests block: shrink bio size again block: simplify and cleanup bvec pool handling block: get rid of bio_rw and READA block: don't ignore -EOPNOTSUPP blkdev_issue_write_same block: introduce BLKDEV_DISCARD_ZERO to fix zeroout NVMe: don't allocate unused nvme_major nvme: avoid crashes when node 0 is memoryless node. nvme: Limit command retries loop: Make user notify for adding loop device failed nvme-loop: fix nvme-loop Kconfig dependencies nvmet: fix return value check in nvmet_subsys_alloc() ...
| * | mmc: move 'parent' tracking to mmc_blk_dataDan Williams2016-06-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation for the removal of 'driverfs_dev' from 'struct gendisk', carry this data in mmc_blk_data. It is used for registration of parent disks and partitions. Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
| * | block: add a separate operation type for secure eraseChristoph Hellwig2016-06-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of overloading the discard support with the REQ_SECURE flag. Use the opportunity to rename the queue flag as well, and remove the dead checks for this flag in the RAID 1 and RAID 10 drivers that don't claim support for secure erase. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
* | | Merge branch 'for-4.8/core' of git://git.kernel.dk/linux-blockLinus Torvalds2016-07-26
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull core block updates from Jens Axboe: - the big change is the cleanup from Mike Christie, cleaning up our uses of command types and modified flags. This is what will throw some merge conflicts - regression fix for the above for btrfs, from Vincent - following up to the above, better packing of struct request from Christoph - a 2038 fix for blktrace from Arnd - a few trivial/spelling fixes from Bart Van Assche - a front merge check fix from Damien, which could cause issues on SMR drives - Atari partition fix from Gabriel - convert cfq to highres timers, since jiffies isn't granular enough for some devices these days. From Jan and Jeff - CFQ priority boost fix idle classes, from me - cleanup series from Ming, improving our bio/bvec iteration - a direct issue fix for blk-mq from Omar - fix for plug merging not involving the IO scheduler, like we do for other types of merges. From Tahsin - expose DAX type internally and through sysfs. From Toshi and Yigal * 'for-4.8/core' of git://git.kernel.dk/linux-block: (76 commits) block: Fix front merge check block: do not merge requests without consulting with io scheduler block: Fix spelling in a source code comment block: expose QUEUE_FLAG_DAX in sysfs block: add QUEUE_FLAG_DAX for devices to advertise their DAX support Btrfs: fix comparison in __btrfs_map_block() block: atari: Return early for unsupported sector size Doc: block: Fix a typo in queue-sysfs.txt cfq-iosched: Charge at least 1 jiffie instead of 1 ns cfq-iosched: Fix regression in bonnie++ rewrite performance cfq-iosched: Convert slice_resid from u64 to s64 block: Convert fifo_time from ulong to u64 blktrace: avoid using timespec block/blk-cgroup.c: Declare local symbols static block/bio-integrity.c: Add #include "blk.h" block/partition-generic.c: Remove a set-but-not-used variable block: bio: kill BIO_MAX_SIZE cfq-iosched: temporarily boost queue priority for idle classes block: drbd: avoid to use BIO_MAX_SIZE block: bio: remove BIO_MAX_SECTORS ...
| * | block, drivers: add REQ_OP_FLUSH operationMike Christie2016-06-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds a REQ_OP_FLUSH operation that is sent to request_fn based drivers by the block layer's flush code, instead of sending requests with the request->cmd_flags REQ_FLUSH bit set. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * | drivers: use req op accessorMike Christie2016-06-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The req operation REQ_OP is separated from the rq_flag_bits definition. This converts the block layer drivers to use req_op to get the op from the request struct. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* | | Merge branch 'timers-core-for-linus' of ↵Linus Torvalds2016-07-25
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "This update provides the following changes: - The rework of the timer wheel which addresses the shortcomings of the current wheel (cascading, slow search for next expiring timer, etc). That's the first major change of the wheel in almost 20 years since Finn implemted it. - A large overhaul of the clocksource drivers init functions to consolidate the Device Tree initialization - Some more Y2038 updates - A capability fix for timerfd - Yet another clock chip driver - The usual pile of updates, comment improvements all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (130 commits) tick/nohz: Optimize nohz idle enter clockevents: Make clockevents_subsys static clocksource/drivers/time-armada-370-xp: Fix return value check timers: Implement optimization for same expiry time in mod_timer() timers: Split out index calculation timers: Only wake softirq if necessary timers: Forward the wheel clock whenever possible timers/nohz: Remove pointless tick_nohz_kick_tick() function timers: Optimize collect_expired_timers() for NOHZ timers: Move __run_timers() function timers: Remove set_timer_slack() leftovers timers: Switch to a non-cascading wheel timers: Reduce the CPU index space to 256k timers: Give a few structs and members proper names hlist: Add hlist_is_singular_node() helper signals: Use hrtimer for sigtimedwait() timers: Remove the deprecated mod_timer_pinned() API timers, net/ipv4/inet: Initialize connection request timers as pinned timers, drivers/tty/mips_ejtag: Initialize the poll timer as pinned timers, drivers/tty/metag_da: Initialize the poll timer as pinned ...
| * | | timers: Remove set_timer_slack() leftoversThomas Gleixner2016-07-07
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We now have implicit batching in the timer wheel. The slack API is no longer used, so remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andrew F. Davis <afd@ti.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Chris Mason <clm@fb.com> Cc: David S. Miller <davem@davemloft.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: George Spelvin <linux@sciencehorizons.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: John Stultz <john.stultz@linaro.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Pali Rohár <pali.rohar@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: linux-block@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: netdev@vger.kernel.org Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160704094342.189813118@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | | Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds2016-07-25
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform updates from Ingo Molnar: "The main changes in this cycle were: - Intel-SoC enhancements (Andy Shevchenko) - Intel CPU symbolic model definition rework (Dave Hansen) - ... other misc changes" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) x86/sfi: Enable enumeration of SD devices x86/pci: Use MRFLD abbreviation for Merrifield x86/platform/intel-mid: Make vertical indentation consistent x86/platform/intel-mid: Mark regulators explicitly defined x86/platform/intel-mid: Rename mrfl.c to mrfld.c x86/platform/intel-mid: Enable spidev on Intel Edison boards x86/platform/intel-mid: Extend PWRMU to support Penwell x86/pci, x86/platform/intel_mid_pci: Remove duplicate power off code x86/platform/intel-mid: Add pinctrl for Intel Merrifield x86/platform/intel-mid: Enable GPIO expanders on Edison x86/platform/intel-mid: Add Power Management Unit driver x86/platform/atom/punit: Enable support for Merrifield x86/platform/intel_mid_pci: Rework IRQ0 workaround x86, thermal: Clean up and fix CPU model detection for intel_soc_dts_thermal x86, mmc: Use Intel family name macros for mmc driver x86/intel_telemetry: Use Intel family name macros for telemetry driver x86/acpi/lss: Use Intel family name macros for the acpi_lpss driver x86/cpufreq: Use Intel family name macros for the intel_pstate cpufreq driver x86/platform: Use new Intel model number macros x86/intel_idle: Use Intel family macros for intel_idle ...
| * | x86, mmc: Use Intel family name macros for mmc driverDave Hansen2016-06-08
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Another straightforward replacement of magic numbers. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: jacob.jun.pan@intel.com Cc: linux-mmc@vger.kernel.org Link: http://lkml.kernel.org/r/20160603001951.9EEA53D8@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | mmc: pxamci: fix potential oopsRobert Jarzmik2016-07-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As reported by Dan in his report in [1], there is a potential NULL pointer derefence if these conditions are met : - there is no platform_data provided, ie. host->pdata = NULL Fix this by only using the platform data ro_invert when a gpio for read-only is provided by the platform data. This doesn't appear yet as every pxa board provides a platform_data, and calls pxa_set_mci_info() with a non NULL pointer. [1] [bug report] mmc: pxamci: fix card detect with slot-gpio API. The commit fd546ee6a7dc ("mmc: pxamci: fix card detect with slot-gpio API") from Sep 26, 2015, leads to the following static checker warning: drivers/mmc/host/pxamci.c:809 pxamci_probe() warn: variable dereferenced before check 'host->pdata' (see line 798) Fixes: fd546ee6a7dc ("mmc: pxamci: fix card detect with slot-gpio API") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: block: fix packed command header endiannessTaras Kondratiuk2016-07-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The code that fills packed command header assumes that CPU runs in little-endian mode. Hence the header is malformed in big-endian mode and causes MMC data transfer errors: [ 563.200828] mmcblk0: error -110 transferring data, sector 2048, nr 8, cmd response 0x900, card status 0xc40 [ 563.219647] mmcblk0: packed cmd failed, nr 2, sectors 16, failure index: -1 Convert header data to LE. Signed-off-by: Taras Kondratiuk <takondra@cisco.com> Fixes: ce39f9d17c14 ("mmc: support packed write command for eMMC4.5 devices") Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: block: fix free of uninitialized 'idata->buf'Ville Viinikka2016-07-18
|/ | | | | | | | | | | | Set 'idata->buf' to NULL so that it never gets returned without initialization. This fixes a bug where mmc_blk_ioctl_cmd() would free both 'idata' and 'idata->buf' but 'idata->buf' was returned uninitialized. Fixes: 1ff8950c0433 ("mmc: block: change to use kmalloc when copy data from userspace") Signed-off-by: Ville Viinikka <ville@tuxera.com> Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sunxi: Re-enable eMMC HS-DDR modes on Allwinner A80Chen-Yu Tsai2016-06-02
| | | | | | | | | Now the the HS-DDR mode clock timings have been corrected, we can re-enable these modes on the A80. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sunxi: Fix DDR MMC timings for A80Chen-Yu Tsai2016-06-02
| | | | | | | | | | | | | | | | | The MMC clock timings were incorrectly calculated, when the conversion from delay value to delay phase was done. The 50M DDR and 50M DDR 8bit timings are off, and make eMMC DDR unusable. Unfortunately it seems different controllers on the same SoC have different timings. The new settings are taken from mmc2, which is commonly used with eMMC. The settings for the slower timing modes seem to work despite being wrong, so leave them be. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: fix mmc mode selection for HS-DDR and higherChen-Yu Tsai2016-06-02
| | | | | | | | | | | | | | | | | | | | When IS_ERR_VALUE was removed from the mmc core code, it was replaced with a simple not-zero check. This does not work, as the value checked is the return value for mmc_select_bus_width, which returns the set bit width on success. This made eMMC modes higher than HS-DDR unusable. Fix this by checking for a positive return value instead. Fixes: 287980e49ffc ("remove lots of IS_ERR_VALUE abuses") Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* remove lots of IS_ERR_VALUE abusesArnd Bergmann2016-05-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge tag 'mmc-v4.7-rc1' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds2016-05-26
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MMC fixes from Ulf Hansson: "Here are some mmc fixes intended for v4.7 rc1. They are based on a commit earlier in the merge window and have been tested in linux-next for a while. MMC core: - Prevent re-tuning while serving requests for RPMB partitions - Extend timeout for long read time quirk to support more eMMCs MMC host: - sdhci-acpi: Ensure connected devices are powered when probing - sdhci-pci|acpi: Remove unreliable MMC_CAP_BUS_WIDTH_TEST for Intel HWs - dw_mmc: Correct the assigning of max_blk_size - dw_mmc-rockchip: Allow RPMB partitions to be created - dw_mmc-rockchip: Set the drive phase properly" * tag 'mmc-v4.7-rc1' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: sdhci-acpi: Remove MMC_CAP_BUS_WIDTH_TEST for Intel controllers mmc: sdhci-pci: Remove MMC_CAP_BUS_WIDTH_TEST for Intel controllers mmc: longer timeout for long read time quirk mmc: dw_mmc: rockchip: Set the drive phase properly mmc: dw_mmc: fix the wrong max_blk_size mmc: dw_mmc-rockchip: add MMC_CAP_CMD23 capabilities mmc: sdhci-acpi: Ensure connected devices are powered when probing ACPI / PM: Export acpi_device_fix_up_power() mmc: block: Pause re-tuning while switched to the RPMB partition mmc: block: Always switch back to main area after RPMB access mmc: core: Add a facility to "pause" re-tuning
| * mmc: sdhci-acpi: Remove MMC_CAP_BUS_WIDTH_TEST for Intel controllersAdrian Hunter2016-05-23
| | | | | | | | | | | | | | | | | | The CMD19/CMD14 bus width test has been found to be unreliable in some cases. It is not essential, so simply remove it. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: sdhci-pci: Remove MMC_CAP_BUS_WIDTH_TEST for Intel controllersAdrian Hunter2016-05-23
| | | | | | | | | | | | | | | | | | The CMD19/CMD14 bus width test has been found to be unreliable in some cases. It is not essential, so simply remove it. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.2 (git 2.25.0) at 2025-03-28 01:03:43 -0400