aboutsummaryrefslogtreecommitdiffstats
path: root/arch/x86/platform
Commit message (Collapse)AuthorAge
...
* | | efi: Disable interrupts around EFI calls, not in the epilog/prolog callsIngo Molnar2015-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tapasweni Pathak reported that we do a kmalloc() in efi_call_phys_prolog() on x86-64 while having interrupts disabled, which is a big no-no, as kmalloc() can sleep. Solve this by removing the irq disabling from the prolog/epilog calls around EFI calls: it's unnecessary, as in this stage we are single threaded in the boot thread, and we don't ever execute this from interrupt contexts. Reported-by: Tapasweni Pathak <tapaswenipathak@gmail.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
* | | x86/efi: Add a "debug" option to the efi= cmdlineBorislav Petkov2015-04-01
|/ / | | | | | | | | | | | | | | | | | | ... and hide the memory regions dump behind it. Make it default-off. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/20141209095843.GA3990@pd.tnic Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Dave Young <dyoung@redhat.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
* | Merge branch 'linus' into x86/urgent, to merge dependent patchIngo Molnar2015-02-28
|\| | | | | | | Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds2015-02-21
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull Intel Quark SoC support from Ingo Molnar: "This adds support for Intel Quark X1000 SoC boards, used in the low power 32-bit x86 Intel Galileo microcontroller board intended for the Arduino space. There's been some preparatory core x86 patches for Quark CPU quirks merged already, but this rounds it all up and adds Kconfig enablement. It's a clean hardware enablement addition tree at this point" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/intel/quark: Fix simple_return.cocci warnings x86/intel/quark: Fix ptr_ret.cocci warnings x86/intel/quark: Add Intel Quark platform support x86/intel/quark: Add Isolated Memory Regions for Quark X1000
| | * x86/intel/quark: Fix simple_return.cocci warningsFengguang Wu2015-02-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arch/x86/platform/intel-quark/imr.c:129:1-4: WARNING: end returns can be simpified Simplify a trivial if-return sequence. Possibly combine with a preceding function call. Generated by: scripts/coccinelle/misc/simple_return.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Andy Shevchenko <andy.schevchenko@gmail.com> Cc: Ong, Boon Leong <boon.leong.ong@intel.com> Cc: Bryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Darren Hart <dvhart@linux.intel.com> Cc: kbuild-all@01.org Link: http://lkml.kernel.org/r/20150219081432.GA21996@waimea Signed-off-by: Ingo Molnar <mingo@kernel.org>
| | * x86/intel/quark: Fix ptr_ret.cocci warningsFengguang Wu2015-02-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arch/x86/platform/intel-quark/imr.c:280:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Andy Shevchenko <andy.schevchenko@gmail.com> Cc: Ong, Boon Leong <boon.leong.ong@intel.com> Cc: Bryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Darren Hart <dvhart@linux.intel.com> Cc: kbuild-all@01.org Link: http://lkml.kernel.org/r/20150219081432.GA21983@waimea Signed-off-by: Ingo Molnar <mingo@kernel.org>
| | * x86/intel/quark: Add Intel Quark platform supportBryan O'Donoghue2015-02-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add Intel Quark platform support. Quark needs to pull down all unlocked IMRs to ensure agreement with the EFI memory map post boot. This patch adds an entry in Kconfig for Quark as a platform and makes IMR support mandatory if selected. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Ong, Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Reviewed-by: Andy Shevchenko <andy.schevchenko@gmail.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Ong, Boon Leong <boon.leong.ong@intel.com> Cc: dvhart@infradead.org Link: http://lkml.kernel.org/r/1422635379-12476-3-git-send-email-pure.logic@nexus-software.ie Signed-off-by: Ingo Molnar <mingo@kernel.org>
| | * x86/intel/quark: Add Isolated Memory Regions for Quark X1000Bryan O'Donoghue2015-02-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Intel's Quark X1000 SoC contains a set of registers called Isolated Memory Regions. IMRs are accessed over the IOSF mailbox interface. IMRs are areas carved out of memory that define read/write access rights to the various system agents within the Quark system. For a given agent in the system it is possible to specify if that agent may read or write an area of memory defined by an IMR with a granularity of 1 KiB. Quark_SecureBootPRM_330234_001.pdf section 4.5 details the concept of IMRs quark-x1000-datasheet.pdf section 12.7.4 details the implementation of IMRs in silicon. eSRAM flush, CPU Snoop write-only, CPU SMM Mode, CPU non-SMM mode, RMU and PCIe Virtual Channels (VC0 and VC1) can have individual read/write access masks applied to them for a given memory region in Quark X1000. This enables IMRs to treat each memory transaction type listed above on an individual basis and to filter appropriately based on the IMR access mask for the memory region. Quark supports eight IMRs. Since all of the DMA capable SoC components in the X1000 are mapped to VC0 it is possible to define sections of memory as invalid for DMA write operations originating from Ethernet, USB, SD and any other DMA capable south-cluster component on VC0. Similarly it is possible to mark kernel memory as non-SMM mode read/write only or to mark BIOS runtime memory as SMM mode accessible only depending on the particular memory footprint on a given system. On an IMR violation Quark SoC X1000 systems are configured to reset the system, so ensuring that the IMR memory map is consistent with the EFI provided memory map is critical to ensure no IMR violations reset the system. The API for accessing IMRs is based on MTRR code but doesn't provide a /proc or /sys interface to manipulate IMRs. Defining the size and extent of IMRs is exclusively the domain of in-kernel code. Quark firmware sets up a series of locked IMRs around pieces of memory that firmware owns such as ACPI runtime data. During boot a series of unlocked IMRs are placed around items in memory to guarantee no DMA modification of those items can take place. Grub also places an unlocked IMR around the kernel boot params data structure and compressed kernel image. It is necessary for the kernel to tear down all unlocked IMRs in order to ensure that the kernel's view of memory passed via the EFI memory map is consistent with the IMR memory map. Without tearing down all unlocked IMRs on boot transitory IMRs such as those used to protect the compressed kernel image will cause IMR violations and system reboots. The IMR init code tears down all unlocked IMRs and sets a protective IMR around the kernel .text and .rodata as one contiguous block. This sanitizes the IMR memory map with respect to the EFI memory map and protects the read-only portions of the kernel from unwarranted DMA access. Tested-by: Ong, Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Reviewed-by: Andy Shevchenko <andy.schevchenko@gmail.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Ong, Boon Leong <boon.leong.ong@intel.com> Cc: andy.shevchenko@gmail.com Cc: dvhart@infradead.org Link: http://lkml.kernel.org/r/1422635379-12476-2-git-send-email-pure.logic@nexus-software.ie Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2015-02-21
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 fixes from Ingo Molnar: "This contains: - EFI fixes - a boot printout fix - ASLR/kASLR fixes - intel microcode driver fixes - other misc fixes Most of the linecount comes from an EFI revert" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/ASLR: Avoid PAGE_SIZE redefinition for UML subarch x86/microcode/intel: Handle truncated microcode images more robustly x86/microcode/intel: Guard against stack overflow in the loader x86, mm/ASLR: Fix stack randomization on 64-bit systems x86/mm/init: Fix incorrect page size in init_memory_mapping() printks x86/mm/ASLR: Propagate base load address calculation Documentation/x86: Fix path in zero-page.txt x86/apic: Fix the devicetree build in certain configs Revert "efi/libstub: Call get_memory_map() to obtain map and desc sizes" x86/efi: Avoid triple faults during EFI mixed mode calls
| * \ \ Merge tag 'tty-3.20-rc1' of ↵Linus Torvalds2015-02-15
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver patches from Greg KH: "Here's the big tty/serial driver update for 3.20-rc1. Nothing huge here, just lots of driver updates and some core tty layer fixes as well. All have been in linux-next with no reported issues" * tag 'tty-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits) serial: 8250: Fix UART_BUG_TXEN workaround serial: driver for ETRAX FS UART tty: remove unused variable sprop serial: of-serial: fetch line number from DT serial: samsung: earlycon support depends on CONFIG_SERIAL_SAMSUNG_CONSOLE tty/serial: serial8250_set_divisor() can be static tty/serial: Add Spreadtrum sc9836-uart driver support Documentation: DT: Add bindings for Spreadtrum SoC Platform serial: samsung: remove redundant interrupt enabling tty: Remove external interface for tty_set_termios() serial: omap: Fix RTS handling serial: 8250_omap: Use UPSTAT_AUTORTS for RTS handling serial: core: Rework hw-assisted flow control support tty/serial: 8250_early: Add support for PXA UARTs tty/serial: of_serial: add support for PXA/MMP uarts tty/serial: of_serial: add DT alias ID handling serial: 8250: Prevent concurrent updates to shadow registers serial: 8250: Use canary to restart console after suspend serial: 8250: Refactor XR17V35X divisor calculation serial: 8250: Refactor divisor programming ...
| | * | | x86, mrst: remove Moorestown specific serial driversAndy Shevchenko2015-02-02
| | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Intel Moorestown platform support was removed few years ago. This is a follow up which removes Moorestown specific code for the serial devices. It includes mrst_max3110 and earlyprintk bits. This was used on SFI (Medfield, Clovertrail) based platforms as well, though new ones use normal serial interface for the console service. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | x86: use %*pb[l] to print bitmaps including cpumasks and nodemasksTejun Heo2015-02-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | printk and friends can now format bitmaps using '%*pb[l]'. cpumask and nodemask also provide cpumask_pr_args() and nodemask_pr_args() respectively which can be used to generate the two printf arguments necessary to format the specified cpu/nodemask. * Unnecessary buffer size calculation and condition on the lenght removed from intel_cacheinfo.c::show_shared_cpu_map_func(). * uv_nmi_nr_cpus_pr() got overly smart and implemented "..." abbreviation if the output stretched over the predefined 1024 byte buffer. Replaced with plain printk. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Mike Travis <travis@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | | kernel.h: remove ancient __FUNCTION__ hackRasmus Villemoes2015-02-12
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | __FUNCTION__ hasn't been treated as a string literal since gcc 3.4, so this only helps people who only test-compile using 3.3 (compiler-gcc3.h barks at anything older than that). Besides, there are almost no occurrences of __FUNCTION__ left in the tree. [akpm@linux-foundation.org: convert remaining __FUNCTION__ references] Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | / x86/platform/intel-mid: Fix trivial printk message typo in ↵Yannick Guerrini2015-02-24
| |/ |/| | | | | | | | | | | | | | | | | | | intel_mid_arch_setup() Change 'Uknown' to 'Unknown' Signed-off-by: Yannick Guerrini <yguerrini@tomshardware.fr> Cc: trivial@kernel.org Link: http://lkml.kernel.org/r/1424710358-10140-1-git-send-email-yguerrini@tomshardware.fr Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | x86/efi: Avoid triple faults during EFI mixed mode callsMatt Fleming2015-02-13
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Andy pointed out that if an NMI or MCE is received while we're in the middle of an EFI mixed mode call a triple fault will occur. This can happen, for example, when issuing an EFI mixed mode call while running perf. The reason for the triple fault is that we execute the mixed mode call in 32-bit mode with paging disabled but with 64-bit kernel IDT handlers installed throughout the call. At Andy's suggestion, stop playing the games we currently do at runtime, such as disabling paging and installing a 32-bit GDT for __KERNEL_CS. We can simply switch to the __KERNEL32_CS descriptor before invoking firmware services, and run in compatibility mode. This way, if an NMI/MCE does occur the kernel IDT handler will execute correctly, since it'll jump to __KERNEL_CS automatically. However, this change is only possible post-ExitBootServices(). Before then the firmware "owns" the machine and expects for its 32-bit IDT handlers to be left intact to service interrupts, etc. So, we now need to distinguish between early boot and runtime invocations of EFI services. During early boot, we need to restore the GDT that the firmware expects to be present. We can only jump to the __KERNEL32_CS code segment for mixed mode calls after ExitBootServices() has been invoked. A liberal sprinkling of comments in the thunking code should make the differences in early and late environments more apparent. Reported-by: Andy Lutomirski <luto@amacapital.net> Tested-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
* Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds2014-12-19
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 apic updates from Thomas Gleixner: "After stopping the full x86/apic branch, I took some time to go through the first block of patches again, which are mostly cleanups and preparatory work for the irqdomain conversion and ioapic hotplug support. Unfortunaly one of the real problematic commits was right at the beginning, so I rebased this portion of the pending patches without the offenders. It would be great to get this into 3.19. That makes reworking the problematic parts simpler. The usual tip testing did not unearth any issues and it is fully bisectible now. I'm pretty confident that this wont affect the calmness of the xmas season. Changes: - Split the convoluted io_apic.c code into domain specific parts (vector, ioapic, msi, htirq) - Introduce proper helper functions to retrieve irq specific data instead of open coded dereferencing of pointers - Preparatory work for ioapic hotplug and irqdomain conversion - Removal of the non functional pci-ioapic driver - Removal of unused irq entry stubs - Make native_smp_prepare_cpus() preemtible to avoid GFP_ATOMIC allocations for everything which is called from there. - Small cleanups and fixes" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) iommu/amd: Use helpers to access irq_cfg data structure associated with IRQ iommu/vt-d: Use helpers to access irq_cfg data structure associated with IRQ x86: irq_remapping: Use helpers to access irq_cfg data structure associated with IRQ x86, irq: Use helpers to access irq_cfg data structure associated with IRQ x86, irq: Make MSI and HT_IRQ indepenent of X86_IO_APIC x86, irq: Move IRQ initialization routines from io_apic.c into vector.c x86, irq: Move IOAPIC related declarations from hw_irq.h into io_apic.h x86, irq: Move HT IRQ related code from io_apic.c into htirq.c x86, irq: Move PCI MSI related code from io_apic.c into msi.c x86, irq: Replace printk(KERN_LVL) with pr_lvl() utilities x86, irq: Make UP version of irq_complete_move() an inline stub x86, irq: Move local APIC related code from io_apic.c into vector.c x86, irq: Introduce helpers to access struct irq_cfg x86, irq: Protect __clear_irq_vector() with vector_lock x86, irq: Rename local APIC related functions in io_apic.c as apic_xxx() x86, irq: Refine hw_irq.h to prepare for irqdomain support x86, irq: Convert irq_2_pin list to generic list x86, irq: Kill useless parameter 'irq_attr' of IO_APIC_get_PCI_irq_vector() x86, irq, acpi: Get rid of special handling of GSI for ACPI SCI x86, irq: Introduce helper to check whether an IOAPIC has been registered ...
| * x86, irq: Use helpers to access irq_cfg data structure associated with IRQJiang Liu2014-12-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use helpers to access irq_cfg data structure associated with IRQ, instead of accessing irq_data->chip_data directly. Later we can rewrite those helpers to support hierarchy irqdomain. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Grant Likely <grant.likely@linaro.org> Cc: Prarit Bhargava <prarit@redhat.com> Link: http://lkml.kernel.org/r/1414397531-28254-17-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * x86, irq: Rename local APIC related functions in io_apic.c as apic_xxx()Jiang Liu2014-12-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename local APIC related functions in io_apic.c as apic_xxx() instead of ioapic_xxx(), later they will be moved into separate file. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Grant Likely <grant.likely@linaro.org> Link: http://lkml.kernel.org/r/1414397531-28254-7-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds2014-12-14
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
| * Merge branch 'platform/remove_owner' of ↵Greg Kroah-Hartman2014-11-03
| |\ | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next Remove all .owner fields from platform drivers
| | * x86: platform: olpc: drop owner assignment from platform_driversWolfram Sang2014-10-20
| | | | | | | | | | | | | | | | | | | | | A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| | * x86: platform: iris: drop owner assignment from platform_driversWolfram Sang2014-10-20
| | | | | | | | | | | | | | | | | | | | | A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| | |
| \ \
*-. \ \ Merge branches 'x86-platform-for-linus' and 'x86-uv-for-linus' of ↵Linus Torvalds2014-12-10
|\ \ \ \ | | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform changes from Ingo Molnar: "A handful of numachip APIC driver updates/fixes, and two small SGI/UV fixes" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: numachip: APIC driver cleanups x86: numachip: Elide self-IPI ICR polling x86: numachip: Fix 16-bit APIC ID truncation * 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: UV BAU: Increase maximum CPUs per socket/hub x86: UV BAU: Avoid NULL pointer reference in ptc_seq_show
| | * | x86: UV BAU: Avoid NULL pointer reference in ptc_seq_showJames Custer2014-11-03
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In init_per_cpu(), when get_cpu_topology() fails, init_per_cpu_tunables() is not called afterwards. This means that bau_control->statp is NULL. If a user then reads /proc/sgi_uv/ptc_statistics ptc_seq_show() references a NULL pointer. Therefore, since uv_bau_init calls set_bau_off when init_per_cpu() fails, we add code that detects when the bau is off in ptc_seq_show() to avoid referencing a NULL pointer. Signed-off-by: James Custer <jcuster@sgi.com> Cc: Russ Anderson <rja@sgi.com> Link: http://lkml.kernel.org/r/1414952199-185319-2-git-send-email-jcuster@sgi.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | | Merge branch 'x86-efi-for-linus' of ↵Linus Torvalds2014-12-10
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI updates from Ingo Molnar: "Changes in this cycle are: - support module unload for efivarfs (Mathias Krause) - another attempt at moving x86 to libstub taking advantage of the __pure attribute (Ard Biesheuvel) - add EFI runtime services section to ptdump (Mathias Krause)" * 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, ptdump: Add section for EFI runtime services efi/x86: Move x86 back to libstub efivarfs: Allow unloading when build as module
| * \ \ Merge tag 'efi-next' of ↵Ingo Molnar2014-11-16
| |\ \ \ | | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/efi Pull EFI updates for v3.19 from Matt Fleming: - Support module unload for efivarfs - Mathias Krause - Another attempt at moving x86 to libstub taking advantage of the __pure attribute - Ard Biesheuvel - Add EFI runtime services section to ptdump - Mathias Krause Signed-off-by: Ingo Molnar <mingo@kernel.org>
| | * | x86, ptdump: Add section for EFI runtime servicesMathias Krause2014-11-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit 3891a04aafd6 ("x86-64, espfix: Don't leak bits 31:16 of %esp returning..") the "ESPFix Area" was added to the page table dump special sections. That area, though, has a limited amount of entries printed. The EFI runtime services are, unfortunately, located in-between the espfix area and the high kernel memory mapping. Due to the enforced limitation for the espfix area, the EFI mappings won't be printed in the page table dump. To make the ESP runtime service mappings visible again, provide them a dedicated entry. Signed-off-by: Mathias Krause <minipli@googlemail.com> Acked-by: Borislav Petkov <bp@suse.de> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
* | | | Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds2014-12-10
|\ \ \ \ | |/ / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm updates from Ingo Molnar: "Misc changes: - context switch micro-optimization - debug printout micro-optimization - comment enhancements and typo fix" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Replace seq_printf() with seq_puts() x86/asm: Fix typo in arch/x86/kernel/asm_offset_64.c sched/x86: Add a comment clarifying LDT context switching sched/x86_64: Don't save flags on context switch
| * | | x86: Replace seq_printf() with seq_puts()Rasmus Villemoes2014-12-08
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | seq_puts is a lot cheaper than seq_printf, so use that to print literal strings. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: http://lkml.kernel.org/r/1417208622-12264-1-git-send-email-linux@rasmusvillemoes.dk Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | | Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2014-10-31
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Fixes from all around the place: - hyper-V 32-bit PAE guest kernel fix - two IRQ allocation fixes on certain x86 boards - intel-mid boot crash fix - intel-quark quirk - /proc/interrupts duplicate irq chip name fix - cma boot crash fix - syscall audit fix - boot crash fix with certain TSC configurations (seen on Qemu) - smpboot.c build warning fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, pageattr: Prevent overflow in slow_virt_to_phys() for X86_PAE ACPI, irq, x86: Return IRQ instead of GSI in mp_register_gsi() x86, intel-mid: Create IRQs for APB timers and RTC timers x86: Don't enable F00F workaround on Intel Quark processors x86/irq: Fix XT-PIC-XT-PIC in /proc/interrupts x86, cma: Reserve DMA contiguous area after initmem_init() i386/audit: stop scribbling on the stack frame x86, apic: Handle a bad TSC more gracefully x86: ACPI: Do not translate GSI number if IOAPIC is disabled x86/smpboot: Move data structure to its primary usage scope
| * | x86, intel-mid: Create IRQs for APB timers and RTC timersJiang Liu2014-10-29
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Intel MID platforms has no legacy interrupts, so no IRQ descriptors preallocated. We need to call mp_map_gsi_to_irq() to create IRQ descriptors for APB timers and RTC timers, otherwise it may cause invalid memory access as: [ 0.116839] BUG: unable to handle kernel NULL pointer dereference at 0000003a [ 0.123803] IP: [<c1071c0e>] setup_irq+0xf/0x4d Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: David Cohen <david.a.cohen@linux.intel.com> Cc: <stable@vger.kernel.org> # 3.17 Link: http://lkml.kernel.org/r/1414387308-27148-3-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | Merge tag 'remove-weak-declarations' of ↵Linus Torvalds2014-10-23
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull weak function declaration removal from Bjorn Helgaas: "The "weak" attribute is commonly used for the default version of a function, where an architecture can override it by providing a strong version. Some header file declarations included the "weak" attribute. That's error-prone because it causes every implementation to be weak, with no strong version at all, and the linker chooses one based on link order. What we want is the "weak" attribute only on the *definition* of the default implementation. These changes remove "weak" from the declarations, leaving it on the default definitions" * tag 'remove-weak-declarations' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: uprobes: Remove "weak" from function declarations memory-hotplug: Remove "weak" from memory_block_size_bytes() declaration kgdb: Remove "weak" from kgdb_arch_pc() declaration ARC: kgdb: generic kgdb_arch_pc() suffices vmcore: Remove "weak" from function declarations clocksource: Remove "weak" from clocksource_default_clock() declaration x86, intel-mid: Remove "weak" from function declarations audit: Remove "weak" from audit_classify_compat_syscall() declaration
| * | x86, intel-mid: Remove "weak" from function declarationsBjorn Helgaas2014-10-22
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For the following interfaces: get_penwell_ops() get_cloverview_ops() get_tangier_ops() there is only one implementation, so they do not need to be marked "weak". Remove the "weak" attribute from their declarations. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Ingo Molnar <mingo@kernel.org> CC: David Cohen <david.a.cohen@linux.intel.com> CC: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> CC: x86@kernel.org
* | Merge branch 'x86-efi-for-linus' of ↵Linus Torvalds2014-10-23
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 EFI updates from Peter Anvin: "This patchset falls under the "maintainers that grovel" clause in the v3.18-rc1 announcement. We had intended to push it late in the merge window since we got it into the -tip tree relatively late. Many of these are relatively simple things, but there are a couple of key bits, especially Ard's and Matt's patches" * 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) rtc: Disable EFI rtc for x86 efi: rtc-efi: Export platform:rtc-efi as module alias efi: Delete the in_nmi() conditional runtime locking efi: Provide a non-blocking SetVariable() operation x86/efi: Adding efi_printks on memory allocationa and pci.reads x86/efi: Mark initialization code as such x86/efi: Update comment regarding required phys mapped EFI services x86/efi: Unexport add_efi_memmap variable x86/efi: Remove unused efi_call* macros efi: Resolve some shadow warnings arm64: efi: Format EFI memory type & attrs with efi_md_typeattr_format() ia64: efi: Format EFI memory type & attrs with efi_md_typeattr_format() x86: efi: Format EFI memory type & attrs with efi_md_typeattr_format() efi: Introduce efi_md_typeattr_format() efi: Add macro for EFI_MEMORY_UCE memory attribute x86/efi: Clear EFI_RUNTIME_SERVICES if failing to enter virtual mode arm64/efi: Do not enter virtual mode if booting with efi=noruntime or noefi arm64/efi: uefi_init error handling fix efi: Add kernel param efi=noruntime lib: Add a generic cmdline parse function parse_option_str ...
| * x86/efi: Mark initialization code as suchMathias Krause2014-10-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 32 bit and 64 bit implementations differ in their __init annotations for some functions referenced from the common EFI code. Namely, the 32 bit variant is missing some of the __init annotations the 64 bit variant has. To solve the colliding annotations, mark the corresponding functions in efi_32.c as initialization code, too -- as it is such. Actually, quite a few more functions are only used during initialization and therefore can be marked __init. They are therefore annotated, too. Also add the __init annotation to the prototypes in the efi.h header so users of those functions will see it's meant as initialization code only. This patch also fixes the "prelog" typo. ("prologue" / "epilogue" might be more appropriate but this is C code after all, not an opera! :D) Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
| * x86/efi: Update comment regarding required phys mapped EFI servicesMathias Krause2014-10-03
| | | | | | | | | | | | | | | | | | Commit 3f4a7836e331 ("x86/efi: Rip out phys_efi_get_time()") left set_virtual_address_map as the only runtime service needed with a phys mapping but missed to update the preceding comment. Fix that. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
| * x86/efi: Unexport add_efi_memmap variableMathias Krause2014-10-03
| | | | | | | | | | | | | | | | | | | | | | | | | | This variable was accidentally exported, even though it's only used in this compilation unit and only during initialization. Remove the bogus export, make the variable static instead and mark it as __initdata. Fixes: 200001eb140e ("x86 boot: only pick up additional EFI memmap...") Cc: Paul Jackson <pj@sgi.com> Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
| * x86: efi: Format EFI memory type & attrs with efi_md_typeattr_format()Laszlo Ersek2014-10-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | An example log excerpt demonstrating the change: Before the patch: > efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x000000000009f000) (0MB) > efi: mem01: type=2, attr=0xf, range=[0x000000000009f000-0x00000000000a0000) (0MB) > efi: mem02: type=7, attr=0xf, range=[0x0000000000100000-0x0000000000400000) (3MB) > efi: mem03: type=2, attr=0xf, range=[0x0000000000400000-0x0000000000800000) (4MB) > efi: mem04: type=10, attr=0xf, range=[0x0000000000800000-0x0000000000808000) (0MB) > efi: mem05: type=7, attr=0xf, range=[0x0000000000808000-0x0000000000810000) (0MB) > efi: mem06: type=10, attr=0xf, range=[0x0000000000810000-0x0000000000900000) (0MB) > efi: mem07: type=4, attr=0xf, range=[0x0000000000900000-0x0000000001100000) (8MB) > efi: mem08: type=7, attr=0xf, range=[0x0000000001100000-0x0000000001400000) (3MB) > efi: mem09: type=2, attr=0xf, range=[0x0000000001400000-0x0000000002613000) (18MB) > efi: mem10: type=7, attr=0xf, range=[0x0000000002613000-0x0000000004000000) (25MB) > efi: mem11: type=4, attr=0xf, range=[0x0000000004000000-0x0000000004020000) (0MB) > efi: mem12: type=7, attr=0xf, range=[0x0000000004020000-0x00000000068ea000) (40MB) > efi: mem13: type=2, attr=0xf, range=[0x00000000068ea000-0x00000000068f0000) (0MB) > efi: mem14: type=3, attr=0xf, range=[0x00000000068f0000-0x0000000006c7b000) (3MB) > efi: mem15: type=6, attr=0x800000000000000f, range=[0x0000000006c7b000-0x0000000006c7d000) (0MB) > efi: mem16: type=5, attr=0x800000000000000f, range=[0x0000000006c7d000-0x0000000006c85000) (0MB) > efi: mem17: type=6, attr=0x800000000000000f, range=[0x0000000006c85000-0x0000000006c87000) (0MB) > efi: mem18: type=3, attr=0xf, range=[0x0000000006c87000-0x0000000006ca3000) (0MB) > efi: mem19: type=6, attr=0x800000000000000f, range=[0x0000000006ca3000-0x0000000006ca6000) (0MB) > efi: mem20: type=10, attr=0xf, range=[0x0000000006ca6000-0x0000000006cc6000) (0MB) > efi: mem21: type=6, attr=0x800000000000000f, range=[0x0000000006cc6000-0x0000000006d95000) (0MB) > efi: mem22: type=5, attr=0x800000000000000f, range=[0x0000000006d95000-0x0000000006e22000) (0MB) > efi: mem23: type=7, attr=0xf, range=[0x0000000006e22000-0x0000000007165000) (3MB) > efi: mem24: type=4, attr=0xf, range=[0x0000000007165000-0x0000000007d22000) (11MB) > efi: mem25: type=7, attr=0xf, range=[0x0000000007d22000-0x0000000007d25000) (0MB) > efi: mem26: type=3, attr=0xf, range=[0x0000000007d25000-0x0000000007ea2000) (1MB) > efi: mem27: type=5, attr=0x800000000000000f, range=[0x0000000007ea2000-0x0000000007ed2000) (0MB) > efi: mem28: type=6, attr=0x800000000000000f, range=[0x0000000007ed2000-0x0000000007ef6000) (0MB) > efi: mem29: type=7, attr=0xf, range=[0x0000000007ef6000-0x0000000007f00000) (0MB) > efi: mem30: type=9, attr=0xf, range=[0x0000000007f00000-0x0000000007f02000) (0MB) > efi: mem31: type=10, attr=0xf, range=[0x0000000007f02000-0x0000000007f06000) (0MB) > efi: mem32: type=4, attr=0xf, range=[0x0000000007f06000-0x0000000007fd0000) (0MB) > efi: mem33: type=6, attr=0x800000000000000f, range=[0x0000000007fd0000-0x0000000007ff0000) (0MB) > efi: mem34: type=7, attr=0xf, range=[0x0000000007ff0000-0x0000000008000000) (0MB) After the patch: > efi: mem00: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x000000000009f000) (0MB) > efi: mem01: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000000009f000-0x00000000000a0000) (0MB) > efi: mem02: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000000400000) (3MB) > efi: mem03: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000400000-0x0000000000800000) (4MB) > efi: mem04: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x0000000000800000-0x0000000000808000) (0MB) > efi: mem05: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000808000-0x0000000000810000) (0MB) > efi: mem06: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x0000000000810000-0x0000000000900000) (0MB) > efi: mem07: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000000900000-0x0000000001100000) (8MB) > efi: mem08: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000001100000-0x0000000001400000) (3MB) > efi: mem09: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000001400000-0x0000000002613000) (18MB) > efi: mem10: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000002613000-0x0000000004000000) (25MB) > efi: mem11: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000004000000-0x0000000004020000) (0MB) > efi: mem12: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000004020000-0x00000000068ea000) (40MB) > efi: mem13: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000068ea000-0x00000000068f0000) (0MB) > efi: mem14: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000068f0000-0x0000000006c7b000) (3MB) > efi: mem15: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x0000000006c7b000-0x0000000006c7d000) (0MB) > efi: mem16: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x0000000006c7d000-0x0000000006c85000) (0MB) > efi: mem17: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x0000000006c85000-0x0000000006c87000) (0MB) > efi: mem18: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000006c87000-0x0000000006ca3000) (0MB) > efi: mem19: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x0000000006ca3000-0x0000000006ca6000) (0MB) > efi: mem20: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x0000000006ca6000-0x0000000006cc6000) (0MB) > efi: mem21: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x0000000006cc6000-0x0000000006d95000) (0MB) > efi: mem22: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x0000000006d95000-0x0000000006e22000) (0MB) > efi: mem23: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000006e22000-0x0000000007165000) (3MB) > efi: mem24: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000007165000-0x0000000007d22000) (11MB) > efi: mem25: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000007d22000-0x0000000007d25000) (0MB) > efi: mem26: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000007d25000-0x0000000007ea2000) (1MB) > efi: mem27: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x0000000007ea2000-0x0000000007ed2000) (0MB) > efi: mem28: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x0000000007ed2000-0x0000000007ef6000) (0MB) > efi: mem29: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000007ef6000-0x0000000007f00000) (0MB) > efi: mem30: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x0000000007f00000-0x0000000007f02000) (0MB) > efi: mem31: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x0000000007f02000-0x0000000007f06000) (0MB) > efi: mem32: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000007f06000-0x0000000007fd0000) (0MB) > efi: mem33: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x0000000007fd0000-0x0000000007ff0000) (0MB) > efi: mem34: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000007ff0000-0x0000000008000000) (0MB) Both the type enum and the attribute bitmap are decoded, with the additional benefit that the memory ranges line up as well. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
| * x86/efi: Clear EFI_RUNTIME_SERVICES if failing to enter virtual modeDave Young2014-10-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | If enter virtual mode failed due to some reason other than the efi call the EFI_RUNTIME_SERVICES bit in efi.flags should be cleared thus users of efi runtime services can check the bit and handle the case instead of assume efi runtime is ok. Per Matt, if efi call SetVirtualAddressMap fails we will be not sure it's safe to make any assumptions about the state of the system. So kernel panics instead of clears EFI_RUNTIME_SERVICES bit. Signed-off-by: Dave Young <dyoung@redhat.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
| * efi: Add kernel param efi=noruntimeDave Young2014-10-03
| | | | | | | | | | | | | | | | | | | | noefi kernel param means actually disabling efi runtime, Per suggestion from Leif Lindholm efi=noruntime should be better. But since noefi is already used in X86 thus just adding another param efi=noruntime for same purpose. Signed-off-by: Dave Young <dyoung@redhat.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
| * lib: Add a generic cmdline parse function parse_option_strDave Young2014-10-03
| | | | | | | | | | | | | | | | | | | | | | There should be a generic function to parse params like a=b,c Adding parse_option_str in lib/cmdline.c which will return true if there's specified option set in the params. Also updated efi=old_map parsing code to use the new function Signed-off-by: Dave Young <dyoung@redhat.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
| * efi: Move noefi early param code out of x86 arch codeDave Young2014-10-03
| | | | | | | | | | | | | | | | noefi param can be used for arches other than X86 later, thus move it out of x86 platform code. Signed-off-by: Dave Young <dyoung@redhat.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
| * efi-bgrt: Add error handling; inform the user when ignoring the BGRTJosh Triplett2014-10-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Gracefully handle failures to allocate memory for the image, which might be arbitrarily large. efi_bgrt_init can fail in various ways as well, usually because the BIOS-provided BGRT structure does not match expectations. Add appropriate error messages rather than failing silently. Reported-by: Srihari Vijayaraghavan <linux.bug.reporting@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81321 Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
| * efi: Add efi= parameter parsing to the EFI boot stubMatt Fleming2014-10-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need a way to customize the behaviour of the EFI boot stub, in particular, we need a way to disable the "chunking" workaround, used when reading files from the EFI System Partition. One of my machines doesn't cope well when reading files in 1MB chunks to a buffer above the 4GB mark - it appears that the "chunking" bug workaround triggers another firmware bug. This was only discovered with commit 4bf7111f5016 ("x86/efi: Support initrd loaded above 4G"), and that commit is perfectly valid. The symptom I observed was a corrupt initrd rather than any kind of crash. efi= is now used to specify EFI parameters in two very different execution environments, the EFI boot stub and during kernel boot. There is also a slight performance optimization by enabling efi=nochunk, but that's offset by the fact that you're more likely to run into firmware issues, at least on x86. This is the rationale behind leaving the workaround enabled by default. Also provide some documentation for EFI_READ_CHUNK_SIZE and why we're using the current value of 1MB. Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Roy Franz <roy.franz@linaro.org> Cc: Maarten Lankhorst <m.b.lankhorst@gmail.com> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
* | uv: Replace __get_cpu_varChristoph Lameter2014-08-26
| | | | | | | | | | | | | | | | | | | | Use __this_cpu_read instead. Cc: Hedi Berriche <hedi@sgi.com> Cc: Mike Travis <travis@sgi.com> Cc: Dimitri Sivanich <sivanich@sgi.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
* | x86: Replace __get_cpu_var usesChristoph Lameter2014-08-26
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
* Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds2014-08-13
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/apic updates from Thomas Gleixner: "This is a major overhaul to the x86 apic subsystem consisting of the following parts: - Remove obsolete APIC driver abstractions (David Rientjes) - Use the irqdomain facilities to dynamically allocate IRQs for IOAPICs. This is a prerequisite to enable IOAPIC hotplug support, and it also frees up wasted vectors (Jiang Liu) - Misc fixlets. Despite the hickup in Ingos previous pull request - caused by the missing fixup for the suspend/resume issue reported by Borislav - I strongly recommend that this update finds its way into 3.17. Some history for you: This is preparatory work for physical IOAPIC hotplug. The first attempt to support this was done by Yinghai and I shot it down because it just added another layer of obscurity and complexity to the already existing mess without tackling the underlying shortcomings of the current implementation. After quite some on- and offlist discussions, I requested that the design of this functionality must use generic infrastructure, i.e. irq domains, which provide all the mechanisms to dynamically map linux interrupt numbers to physical interrupts. Jiang picked up the idea and did a great job of consolidating the existing interfaces to manage the x86 (IOAPIC) interrupt system by utilizing irq domains. The testing in tip, Linux-next and inside of Intel on various machines did not unearth any oddities until Borislav exposed it to one of his oddball machines. The issue was resolved quickly, but unfortunately the fix fell through the cracks and did not hit the tip tree before Ingo sent the pull request. Not entirely Ingos fault, I also assumed that the fix was already merged when Ingo asked me whether he could send it. Nevertheless this work has a proper design, has undergone several rounds of review and the final fallout after applying it to tip and integrating it into Linux-next has been more than moderate. It's the ground work not only for IOAPIC hotplug, it will also allow us to move the lowlevel vector allocation into the irqdomain hierarchy, which will benefit other architectures as well. Patches are posted already, but they are on hold for two weeks, see below. I really appreciate the competence and responsiveness Jiang has shown in course of this endavour. So I'm sure that any fallout of this will be addressed in a timely manner. FYI, I'm vanishing for 2 weeks into my annual kids summer camp kitchen duty^Wvacation, while you folks are drooling at KS/LinuxCon :) But HPA will have a look at the hopefully zero fallout until I'm back" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits) x86, irq, PCI: Keep IRQ assignment for PCI devices during suspend/hibernation x86/apic/vsmp: Make is_vsmp_box() static x86, apic: Remove enable_apic_mode callback x86, apic: Remove setup_portio_remap callback x86, apic: Remove multi_timer_check callback x86, apic: Replace noop_check_apicid_used x86, apic: Remove check_apicid_present callback x86, apic: Remove mps_oem_check callback x86, apic: Remove smp_callin_clear_local_apic callback x86, apic: Replace trampoline physical addresses with defaults x86, apic: Remove x86_32_numa_cpu_node callback x86: intel-mid: Use the new io_apic interfaces x86, vsmp: Remove is_vsmp_box() from apic_is_clustered_box() x86, irq: Clean up irqdomain transition code x86, irq, devicetree: Release IOAPIC pin when PCI device is disabled x86, irq, SFI: Release IOAPIC pin when PCI device is disabled x86, irq, mpparse: Release IOAPIC pin when PCI device is disabled x86, irq, ACPI: Release IOAPIC pin when PCI device is disabled x86, irq: Introduce helper functions to release IOAPIC pin x86, irq: Simplify the way to handle ISA IRQ ...
| * x86: intel-mid: Use the new io_apic interfacesJiang Liu2014-07-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 9f354b0252b8 "x86, irq: Clean up unused IOAPIC interface" kills interface io_apic_set_pci_routing(), so change arch/x86/platform/ intel-mid/device_libs/platform_wdt.c to use new interfaces. Due to hardware resource restriction, this patch only passes compilation without functional tests. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Acked-by: David Cohen <david.a.cohen@linux.intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Tang Feng <feng.tang@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/1403490643-26187-1-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * x86, irq, SFI: Use common irqdomain map interface to program IOAPIC pinsJiang Liu2014-06-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Refine SFI to use common irqdomain map interface to program IOAPIC pins, so we can unify the callsite to progam IOAPIC pins. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: sfi-devel@simplefirmware.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Len Brown <lenb@kernel.org> Cc: David Cohen <david.a.cohen@linux.intel.com> Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: http://lkml.kernel.org/r/1402302011-23642-33-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * x86, SFI, irq: Provide basic irqdomain supportJiang Liu2014-06-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enhance SFI to provide basic support of irqdomain with identity mapping between GSIs and IRQs. Some Intel MID platforms assumes identity mapping between GSI and IRQ, so we can't dynamically allocate IRQ number on demand. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: sfi-devel@simplefirmware.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Len Brown <lenb@kernel.org> Cc: David Cohen <david.a.cohen@linux.intel.com> Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: http://lkml.kernel.org/r/1402302011-23642-28-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
generated by cgit v1.2.2 (git 2.25.0) at 2025-04-04 01:56:40 -0400