aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm
Commit message (Collapse)AuthorAge
...
| | * | | | | | | | | | | | | | | | | ARM: dts: da850,da850-evm: Add an aemif node and use it for the NANDKarl Beldan2016-08-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the davinci da8xx boards use the mach-davinci aemif code. Instantiating an aemif node into the DT allows to use the ti-aemif memory driver and is another step to better DT support. This change adds an aemif node in the dtsi while retiring the nand_cs3 node. The NAND is now instantiated in the dts as a subnode of the aemif one along with its pins. Signed-off-by: Karl Beldan <kbeldan@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
| | * | | | | | | | | | | | | | | | | ARM: dts: da850: Add basic DTS for the LCDKKarl Beldan2016-08-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The LCDK is the successor to the late Hawkboard. Among the differences are the flash (16bits vs 8bits) and some pins (MMC, LEDs, buttons, some external connectors), however the main components remain the same (eth. phy, audio codec, video decoder and DAC) except for the main PMIC, different and hard-wired on the LCDK (the LDOs and DCDCs are always on). A DT-only boot with this addition gives functional UART, reboot via watchdog, RTC, ethernet and MMC (I added the CD GPIO for the MMC although davinci_mmc doesn't call the OF facilities of mmc core). Cc: Sekhar Nori <nsekhar@ti.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Karl Beldan <kbeldan@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
| | * | | | | | | | | | | | | | | | | ARM: dts: da850: Add missing pin muxing for the UARTsKarl Beldan2016-08-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds 2 pinctrl groups (rtscts, rxtx) for each of the 3 UARTs. Signed-off-by: Karl Beldan <kbeldan@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
| | * | | | | | | | | | | | | | | | | ARM: dts: da850: Add new ECAP and EPWM bindingsCooper Jr., Franklin2016-08-09
| | |/ / / / / / / / / / / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For some devices, the PWMSS is a parent of eCAP and ePWM and provides the functional clocks for those submodules. The ti,am33xx-ecap and ti,am33xx-ehrpwm bindings were based on this parent child relationship where the functional clock would be grabbed from the module's parent. However, DA850 doesn't have a PWMSS and the eCAP and ePWM provides their functional clock themselves. Therefore, prefer the new binding that doesn't assume this parent child relationship. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Acked-by: Rob Herring <robh@kernel.org> [nsekhar@ti.com: minor commit message fixes] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
| * | | | | | | | | | | | | | | | | Merge tag 'arm-soc/for-4.9/devicetree' of ↵Arnd Bergmann2016-09-14
| |\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | http://github.com/Broadcom/stblinux into next/dt Pull "Broadcom devicetree changes for 4.9" from Florian Fainelli: This pull request contains Broadcom ARM-based Device Tree changes for v4.9, please pull the following: - Jon adds support for the Ethernet MAC DT nodes (AMAC) and provides the following updates for Broadcom references boards: * New Northstar Plus reference boards added: BCM958525er, BCM958522er, BCM988312hr, BCM958623hr and BCM958622hr * Add SATA nodes to the BCM958625hr and XMC boards * Add I2C nodes to the XMC board * Fixes the amount of RAM on BCM958625HR, BCM958625K and BCM958525XMC boards * Add the GPIO reboot method for BCM958625hr and XMC boards - Dhanajay adds PWM nodes for the Northstar Plus SoCs - Rafal adds the USB 2.0 PHY to the BCM5301x Device Tree file include - Stefan adds a missing USB clock to the BCM283x DT files, adds a DTSI file for the USB host mode on BCM283x and finally documents and adds support for the Raspberry Pi Zero - Florian adds support for the Northstar Plus Switch Register Access block which enables the integrated switch on these SoCs and enables the switch ports on the BCM958625HR reference board * tag 'arm-soc/for-4.9/devicetree' of http://github.com/Broadcom/stblinux: (22 commits) ARM: dts: bcm2835: Add Raspberry Pi Zero DT: bindings: bcm: Add Raspberry Pi Zero ARM: dts: bcm283x: Add dtsi for USB host mode ARM: dts: bcm283x: Add missing USB clock ARM: dts: NSP: Add new DT file for bcm958622hr ARM: dts: NSP: Add new DT file for bcm958623hr ARM: dts: NSP: Add new DT file for bcm988312hr ARM: dts: NSP: Add new DT file for bcm958522er ARM: dts: NSP: Add new DT file for bcm958525er ARM: dts: NSP: Add GPIO reboot method to bcm958625xmc DTS file ARM: dts: NSP: Add GPIO reboot method to bcm958625hr DTS file ARM: dts: NSP: Specify RAM amount for BCM958525XMC board ARM: dts: NSP: Specify RAM amount for BCM958625K board ARM: dts: NSP: Enable SATA and add i2c devices on XMC ARM: dts: NSP: Enable SATA on bcm958625hr ARM: dts: NSP: Correct RAM amount for BCM958625HR board ARM: dts: NSP: Add PWM Support to DT ARM: BCM5301X: Specify PHY of USB 2.0 in DT ARM: dts: NSP: Add BCM958625HR switch ports ARM: dts: NSP: Add Switch Register Access Block node ...
| | * \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ Merge tag 'bcm2835-dt-next-2016-08-29' into devicetree/nextFlorian Fainelli2016-08-30
| | |\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This pull request brings in support for Raspberry Pi Zero. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
| | | * | | | | | | | | | | | | | | | | ARM: dts: bcm2835: Add Raspberry Pi ZeroStefan Wahren2016-08-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Raspberry Pi Zero is a minified version of model A+. It's notable there is no PWR LED and the ACT LED is inverted. Additionally the Pi Zero is capable of the USB peripheral mode. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| | | * | | | | | | | | | | | | | | | | ARM: dts: bcm283x: Add dtsi for USB host modeStefan Wahren2016-08-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case dr_mode isn't passed via DT, the dwc2 defaults to OTG mode. But all Raspberry Pi boards here are designed only for host mode. So fix this issue by providing a dtsi file which set the dr_mode to host. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| | | * | | | | | | | | | | | | | | | | ARM: dts: bcm283x: Add missing USB clockStefan Wahren2016-08-24
| | | |/ / / / / / / / / / / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the DWC2 binding an appropriate clock is required. This clock isn't handled by bcm2835 clock driver, so add a fixed clock to the bcm283x DT. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| | * | | | | | | | | | | | | | | | | ARM: dts: NSP: Add new DT file for bcm958622hrJon Mason2016-08-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create a new device tree file for the Broadcom Northstar Plus bcm958622hr SVK. This SVK has 2GB RAM, 5 port Ethernet, 2 PCI slots, and 1 UART. Also, it has the ability to reboot via GPIO. To be added in the future are support for the USB and SLIC audio. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
| | * | | | | | | | | | | | | | | | | ARM: dts: NSP: Add new DT file for bcm958623hrJon Mason2016-08-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create a new device tree file for the Broadcom Northstar Plus bcm958623hr SVK. This SVK has 2GB RAM, 5 ports Ethernet, SATA, 2 PCI slots, and 1 UART. Also, it has the ability to reboot via GPIO. To be added in the future are support for the USB and SLIC audio. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
| | * | | | | | | | | | | | | | | | | ARM: dts: NSP: Add new DT file for bcm988312hrJon Mason2016-08-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create a new device tree file for the Broadcom Northstar Plus bcm988312hr SVK. This SVK has 2GB RAM, 5 ports Ethernet, 2 eSATA, 2 PCI slots, and 1 UART. Also, it has the ability to reboot via GPIO. To be added in the future is support for the USB. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
| | * | | | | | | | | | | | | | | | | ARM: dts: NSP: Add new DT file for bcm958522erJon Mason2016-08-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create a new device tree file for the Broadcom Northstar Plus bcm958522er SVK. This SVK has 2GB RAM, 2 ports Ethernet, 2 PCI slots, and 1 UART. Also, it has the ability to reboot via GPIO. To be added in the future is support for the USB. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
| | * | | | | | | | | | | | | | | | | ARM: dts: NSP: Add new DT file for bcm958525erJon Mason2016-08-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create a new device tree file for the Broadcom Northstar Plus bcm958525er SVK. This SVK has 2GB RAM, 2 ports Ethernet, 2 eSATA, 2 PCI slots, and 1 UART. Also, it has the ability to reboot via GPIO. To be added in the future is support for the USB. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
| | * | | | | | | | | | | | | | | | | ARM: dts: NSP: Add GPIO reboot method to bcm958625xmc DTS fileJon Mason2016-08-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the ability to reboot the bcm958625xmc board via GPIO. Unfortunately, not all of the NSP based boards use the same GPIO pin and one doesn't have the ability to reboot via GPIO at all. So, this will need to be specified per DTS file. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
| | * | | | | | | | | | | | | | | | | ARM: dts: NSP: Add GPIO reboot method to bcm958625hr DTS fileJon Mason2016-08-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the ability to reboot the bcm958625hr board via GPIO. Unfortunately, not all of the NSP based boards use the same GPIO pin and one doesn't have the ability to reboot via GPIO at all. So, this will need to be specified per DTS file. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
| | * | | | | | | | | | | | | | | | | ARM: dts: NSP: Specify RAM amount for BCM958525XMC boardJon Mason2016-08-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add 1GB of memory starting at physical offset 0x6000_0000. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
| | * | | | | | | | | | | | | | | | | ARM: dts: NSP: Specify RAM amount for BCM958625K boardJon Mason2016-08-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add 2GB of memory starting at physical offset 0x6000_0000. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
| | * | | | | | | | | | | | | | | | | ARM: dts: NSP: Enable SATA and add i2c devices on XMCJon Mason2016-08-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable SATA on bcm958625xmc and add the i2c devices present. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
| | * | | | | | | | | | | | | | | | | ARM: dts: NSP: Enable SATA on bcm958625hrJon Mason2016-08-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add SATA support to bcm958625hr DTS Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
| | * | | | | | | | | | | | | | | | | ARM: dts: NSP: Correct RAM amount for BCM958625HR boardJon Mason2016-08-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BCM958625HR board has 2GB of RAM available. Increase the amount from 512MB to 2GB and add the device type to the memory entry. Fixes: 9a4865d42fe5 ("ARM: dts: NSP: Specify RAM amount for BCM958625HR board") Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
| | * | | | | | | | | | | | | | | | | ARM: dts: NSP: Add PWM Support to DTYendapally Reddy Dhananjaya Reddy2016-08-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add PWM support to the device tree for the Broadcom Northstar Plus SoC. Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
| | * | | | | | | | | | | | | | | | | ARM: BCM5301X: Specify PHY of USB 2.0 in DTRafał Miłecki2016-08-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Driver for Northstar USB 2.0 PHY was added in 4.7-rc1 by: commit d3feb4067335 ("phy: bcm-ns-usb2: new driver for USB 2.0 PHY on Northstar"). It should be used to let EHCI platform driver init PHY. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
| | * | | | | | | | | | | | | | | | | ARM: dts: NSP: Add BCM958625HR switch portsFlorian Fainelli2016-08-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the layout of the switch ports found on the BCM958625HR reference board. The CPU port is hooked up to the AMAC0 Ethernet controlelr adapter, so we also enable it. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
| | * | | | | | | | | | | | | | | | | ARM: dts: NSP: Add Switch Register Access Block nodeFlorian Fainelli2016-08-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the Switch Register Access Block node, this peripheral is identical to the BCM5301x Northstar SoC, but we utilize the SoC-wide "brcm,nsp-srab" compatible string to illustrate the integration difference here. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
| | * | | | | | | | | | | | | | | | | ARM: dts: NSP: Add AMAC entriesJon Mason2016-08-08
| | |/ / / / / / / / / / / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add Device Tree entries for the Ethernet devices (AMAC) present on the Broadcom Northstar Plus SoCs. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
| * | | | | | | | | | | | | | | | | Merge tag 'clcd-nomadik' of ↵Arnd Bergmann2016-09-13
| |\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt Pull "CLCD graphics on the Nomadik NHK15" from Linus Walleij: * tag 'clcd-nomadik' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: add the CLCD LCD display to the NHK15 ARM: dts: add PMU to the NHK15 device tree ARM: nomadik: select MFD_SYSCON dt-bindings: Add TPO TPG110 binding dt-bindings: add vendor TPO ARM: dts: add STMPE PWM to the NHK15 device tree
| | * | | | | | | | | | | | | | | | | ARM: dts: add the CLCD LCD display to the NHK15Linus Walleij2016-09-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the TPG110 TDO43MTEA2 24-bit RGB LCD panel and sets up the Nomadik device tree to activate the CLCD and connect it to this panel. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| | * | | | | | | | | | | | | | | | | ARM: dts: add PMU to the NHK15 device treeLinus Walleij2016-09-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The so-called Nomadik Power Mangament Unit is actually a set of some power management registers and some miscellaneous system control stuff like muxing of entire hardware units. Add this as a system controller. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| | * | | | | | | | | | | | | | | | | ARM: nomadik: select MFD_SYSCONLinus Walleij2016-09-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the Power Management Unit is using syscon to access a set of necessary hardware muxing, let's select MFD_SYSCON for the Nomadik subarchitecture. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| | * | | | | | | | | | | | | | | | | ARM: dts: add STMPE PWM to the NHK15 device treeLinus Walleij2016-09-09
| | |/ / / / / / / / / / / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the STMPE PWM to the NHK15 device tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | | | | | | | | | | | | | | | Merge tag 'imx-dt-4.9' of ↵Arnd Bergmann2016-09-13
| |\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt Pull "i.MX device tree changes for 4.9" from Shawn Guo: - Add SoC support for i.MX7 Solo which is a reduced version of i.MX7 Dual. - New board support: Gateworks Ventana i.MX6Q/DL GW553x, Inverse Path i.MX53 USB armory, i.MX6Q/DL TS-4900 from Technologic Systems, i.MX6UL GEA M6UL modules from Engicam, i.MX7 Solo Warp7 board. - Add DMA and IPU CSI devices for i.MX53 SoC support. - Refine i.MX7 Dual SoC DTS as a preparation of i.MX7 Solo support. - Use of_graph dt nodes to describe the panel for vf610-colibri and ls1021a-twr boards. - Add gpio-ranges property to i.MX6 GPIO controllers, which will be useful when GPIO driver is changed to request pad configuration as GPIO function. - Random device additions or small changes for various board support. * tag 'imx-dt-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (41 commits) ARM: dts: add gpio-ranges property to iMX GPIO controllers ARM: dts: imx35: add iim module to imx35.dtsi ARM: dts: vf610-colibri: use of_graph dt nodes to describe the panel ARM: dts: ls1021a: Add of_graph dt nodes to describe the panel ARM: dts: imx53: add support for USB armory board devicetree: Add vendor prefix for Inverse Path ARM: dts: imx7s-warp: Add Bluetooth support ARM: dts: imx7s-warp: Add User Button support ARM: dts: imx7s-warp: Enable I2C2 device support ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support ARM: dts: imx6ul iomuxc syscon is compatible to imx6q ARM: dts: imx7-colibri: add Audio support ARM: dts: imx7-colibri: add basic supply regulators ARM: dts: imx7-colibri: move SD-card to module level ARM: dts: imx6sx: Add GPU bindings ARM: dts: imx7s-warp: Let the codec control MCLK pinctrl ARM: dts: imx6ul-pico-hobbit: Use WDOG_B pin reset ARM: dts: imx6q-bx50v3: configure unused pca953x pins ARM: dts: imx6sx: document SION necessity of ENET1_REF_CLK1 ARM: dts: imx7s-warp: Use WDOG_B pin reset ...
| | * | | | | | | | | | | | | | | | | ARM: dts: add gpio-ranges property to iMX GPIO controllersVladimir Zapolskiy2016-09-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To establish a connection between GPIO controllers and pin multiplexor controller add gpio-ranges properties to all GPIO controllers found on iMX50, iMX6Q/D, iMX6DL/S, iMX6SL, iMX6SX, iMX6UL and iMX7D/S SoCs. The change was done after human parsing of output from % gawk -n '{ sub(/.*__/, ""); if ($1 ~ "^GPIO") print $1, $2/4}' imxXX-pinfunc.h | sort -n Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | | | | | | | | | ARM: dts: imx35: add iim module to imx35.dtsiUwe Kleine-König2016-09-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a prerequisite to remove the static mappings for imx35 devicetree based machines. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | | | | | | | | | ARM: dts: vf610-colibri: use of_graph dt nodes to describe the panelStefan Agner2016-09-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The fsl,panel property is deprecated and we should use the new of_graph dt bindings to describe the relationship between the DCU controller and the panel. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | | | | | | | | | ARM: dts: ls1021a: Add of_graph dt nodes to describe the panelMeng Yi2016-09-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | add of_graph dt nodes to describe the panel, and removed "fsl,panel" property Signed-off-by: Meng Yi <meng.yi@nxp.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | | | | | | | | | ARM: dts: imx53: add support for USB armory boardAndrej Rosano2016-09-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Inverse Path USB armory board, an open source flash-drive sized computer based on NXP i.MX53 SoC. https://inversepath.com/usbarmory Signed-off-by: Andrej Rosano <andrej@inversepath.com> Tested-by: Vagrant Cascadian <vagrant@debian.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | | | | | | | | | ARM: dts: imx7s-warp: Add Bluetooth supportVanessa Maegima2016-09-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | WaRP7 has a BCM43430 Bluetooth chip. Add support for it. Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | | | | | | | | | ARM: dts: imx7s-warp: Add User Button supportVanessa Maegima2016-09-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add User Button at GPIO7_1. Tested by evtest. Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | | | | | | | | | ARM: dts: imx7s-warp: Enable I2C2 device supportVanessa Maegima2016-09-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable I2C2 device support. Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | | | | | | | | | ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial supportMichael Trimarchi2016-09-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IMX6UL GEA M6UL modules are system on module solutions manufactured by Engicam with following characteristics: Processor Freescale i.MX 6UltraLite MCIMX6G2, 528 MHz RAM 128MB, 16-bit DDR3 NAND SLC 256MB Power supply Single 5V MAX LCD RES up to WXGA, 1366x768 and more info at http://www.engicam.com/prodotti/embedded/som/sodimm/gea-m6ul Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Matteo Lisi <matteo.lisi@engicam.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | | | | | | | | | ARM: dts: imx6ul iomuxc syscon is compatible to imx6qAnson Huang2016-08-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The imx6ul iomuxc syscon is compatible to imx6q, so let's add compatible string 'fsl,imx6q-iomuxc-gpr' for imx6ul iomuxc syscon node. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | | | | | | | | | ARM: dts: imx7-colibri: add Audio supportStefan Agner2016-08-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add audio support via on module I2S SGTL5000 codec. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | | | | | | | | | ARM: dts: imx7-colibri: add basic supply regulatorsStefan Agner2016-08-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Colibri modules need to be powered using the power pins 3V3 and AVDD_AUDIO. Add fixed regulators which represent this power rails. Potentially, those power rails could be switched on a carrier board. A carrier board device tree could add a own regulator with a GPIO, and reference that regulator in a vin-supply property of those new module level system regulators. This also synchronize the name of the +3.3V regulator with the one used in the Colibri VF50/VF61 device tree. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | | | | | | | | | ARM: dts: imx7-colibri: move SD-card to module levelStefan Agner2016-08-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move SD-card definition to module level. While at it, also disable write-protect since the Colibri standard does not define a pin for SD-Card write-protection. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | | | | | | | | | ARM: dts: imx6sx: Add GPU bindingsMarek Vasut2016-08-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add bindings for the Vivante GC400T GPU found in the i.MX6SX. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | | | | | | | | | ARM: dts: imx7s-warp: Let the codec control MCLK pinctrlFabio Estevam2016-08-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sgtl5000 codec needs MCLK clock to be provided so that it can successfully read/write via I2C, so we should better let the codec control the pinctrl for such pin. Thanks to Stefan Agner who provided the fix on Toradex's tree: http://git.toradex.com/cgit/linux-toradex.git/commit/?h=toradex_imx_4.1.15_1.0.0_ga-next&id=0a55a7e5f58d46eef0d4d1d357d89e36d0c32fa4 Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | | | | | | | | | ARM: dts: imx6ul-pico-hobbit: Use WDOG_B pin resetFabio Estevam2016-08-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | imx6ul-pico has WDOG1_B pin connected to the PMIC. Pass the 'fsl,ext-reset-output' property so that the watchdog can trigger a system POR reset via PMIC. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | | | | | | | | | ARM: dts: imx6q-bx50v3: configure unused pca953x pinsKen Lin2016-08-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At power on, pca953x GPIO pins are configured as input and may cause unexpected interrupts. Configure the unused pins as GPO low to avoid unexpected interrupts. Signed-off-by: Ken Lin <ken.lin@advantech.com.tw> Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | | | | | | | | | ARM: dts: imx6sx: document SION necessity of ENET1_REF_CLK1Christoph Fritz2016-08-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.2 (git 2.25.0) at 2025-03-20 04:17:12 -0400