aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts
Commit message (Collapse)AuthorAge
...
| | * | | | | | | ARM: dts: aspeed: Add SPI controller bindings to RomulusCédric Le Goater2017-04-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Romulus systems have one MX25L25635 (32768 Kbytes) flash module for the BMC firmware and other MT25QL512A (65536 Kbytes) for the host. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
| | * | | | | | | ARM: dts: aspeed: Make G4 clocks fixedJoel Stanley2017-04-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We do not yet have a clk driver upstream. So that users can boot the unmodified upstream kernel, add fixed-clock and clock-frequency properties to all of the clocks. The values are taken from the Palmetto system. This is the only upstream dts. It also happens to match all of the systems seen so far. Acked-by: Cédric Le Goater <clg@kaod.org> Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
| | * | | | | | | ARM: dts: aspeed: Make G5 clocks fixedJoel Stanley2017-04-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We do not yet have a clk driver upstream. So that users can boot the unmodified upstream kernel, add fixed-clock and clock-frequency properties to all of the clocks. The values are taken from the ast2500evb. This is the only upstream dts. It also happens to match all of the systems I have seen so far. Acked-by: Cédric Le Goater <clg@kaod.org> Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
| | * | | | | | | ARM: dts: aspeed: add SPI controller bindingsCédric Le Goater2017-03-05
| | | |/ / / / / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let's define the SPI controllers in the Aspeed SoCs AST2500 and AST2400 and also enable these, as well as the chips, on the associated platforms. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
| * | | | | | | Merge tag 'omap-for-v4.12/dt-pt2-signed' of ↵Olof Johansson2017-04-19
| |\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Second set of devicetree changes for omaps for v4.12 merge window to configure various devices: - Enable DCAN on am57xx-idk - Enable CPSW ethernet0 and 1 on am335x-icev2 - Non-critical fix for droid 4 PMIC interrupt triggering - Stop disabling SRAM and GPMC on droid 4 - Configure CPCAP PMIC related devices on droid 4 for ADC, charger and USB PHY. The charger and USB PHY drivers are still being discussed, but the binding for them has been acked by Rob and Sebastian so they should be safe to merge together with the ADC driver in Linux next that they depend on * tag 'omap-for-v4.12/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap4-droid4: Add CPCAP PMIC OTG PHY configuration ARM: dts: omap4-droid4: Add CPCAP PMIC battery charger configuration ARM: dts: omap4-droid4: Add CPCAP PMIC ADC configuration ARM: dts: omap4-droid4: Stop disabling SRAM and GPMC ARM: dts: omap4-droid4: Fix interrupt triggering for cpcap ARM: dts: am335x-icev2: Add CPSW ethernet0 and ethernet1 ARM: dts: am57xx-idk: Add DCAN support Signed-off-by: Olof Johansson <olof@lixom.net>
| | * \ \ \ \ \ \ Merge branch 'omap-for-v4.12/dt-droid4-v2' into omap-for-v4.12/dt-v2Tony Lindgren2017-04-09
| | |\ \ \ \ \ \ \
| | | * | | | | | | ARM: dts: omap4-droid4: Add CPCAP PMIC OTG PHY configurationTony Lindgren2017-04-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add CPCAP PMIC OTG PHY configuration. Cc: devicetree@vger.kernel.org Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Reviewed-by: Sebastian Reichel <sre@kernel.org> Tested-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | | * | | | | | | ARM: dts: omap4-droid4: Add CPCAP PMIC battery charger configurationTony Lindgren2017-04-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add CPCAP PMIC battery charger configuration. Cc: devicetree@vger.kernel.org Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Reviewed-by: Sebastian Reichel <sre@kernel.org> Tested-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | | * | | | | | | ARM: dts: omap4-droid4: Add CPCAP PMIC ADC configurationTony Lindgren2017-04-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add CPCAP PMIC ADC configuration. Cc: devicetree@vger.kernel.org Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Reviewed-by: Sebastian Reichel <sre@kernel.org> Tested-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | | * | | | | | | ARM: dts: omap4-droid4: Stop disabling SRAM and GPMCTony Lindgren2017-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I disabled SRAM and GPMC originally when seeing errors with omap_barriers_init(). But that is no longer happening probably because the memory range is now properly configured to 1021 MB instead of 1024 MB. So let's enable SRAM and GPMC so we get omap_barriers_init() working and can idle the GPMC. Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | | * | | | | | | ARM: dts: omap4-droid4: Fix interrupt triggering for cpcapTony Lindgren2017-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CPCAP PMIC interrupt is level high sensitive despite it being requested as edge high triggered in the Motorola Linux kernel. Note that also the related driver change is needed posted as "mfd: cpcap: Fix interrupt to use level interrupt". Fixes: 56e1d40d3bea ("mfd: cpcap: Add minimal support") Cc: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | | | | | | ARM: dts: am335x-icev2: Add CPSW ethernet0 and ethernet1Roger Quadros2017-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the 2 ethernet ports as CPSW ports in dual-mac mode Signed-off-by: Roger Quadros <rogerq@ti.com> [nsekhar@ti.com: use AM33XX_IOPAD()] Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | | | | | | ARM: dts: am57xx-idk: Add DCAN supportSchuyler Patton2017-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | AM571x IDK and the AM572x IDK use CAN1 interface. This patch enables it for both boards. Tested on AM572x IDK using cansequence. Signed-off-by: Schuyler Patton <spatton@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> [nsekhar@ti.com: move to use DRA7XX_CORE_IOPAD()) Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | | | | | | Merge tag 'at91-ab-4.12-dt' of ↵Olof Johansson2017-04-19
| |\ \ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt DT for 4.12: - Add SFRBU on sama5d2 - DT improvements for sama5d2_xplained, sama5d3_xplained, at91sam9x5ek and Axentia TSE-850 * tag 'at91-ab-4.12-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: dts: at91: sama5d3_xplained: not all ADC channels are available ARM: dts: at91: sama5d3_xplained: fix ADC vref ARM: dts: at91: add envelope detector mux to the Axentia TSE-850 ARM: dts: at91: Disable SPI on at91sam9x5ek to allow MCI1 to work. ARM: dts: at91: Fix matrix compatible ARM: dts: at91: sama5d2_xplained: enable RTC wakeup ARM: dts: at91: sama5d2: add sfrbu Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | | | | | | | ARM: dts: at91: sama5d3_xplained: not all ADC channels are availableLudovic Desroches2017-04-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove ADC channels that are not available by default on the sama5d3_xplained board (resistor not populated) in order to not create confusion. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: <stable@vger.kernel.org> # 3.16+ Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
| | * | | | | | | | | ARM: dts: at91: sama5d3_xplained: fix ADC vrefLudovic Desroches2017-04-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The voltage reference for the ADC is not 3V but 3.3V since it is connected to VDDANA. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: <stable@vger.kernel.org> # 3.16+ Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
| | * | | | | | | | | ARM: dts: at91: add envelope detector mux to the Axentia TSE-850Peter Rosin2017-04-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The envelope detector can analyze 6 different signals, selectable with a mux controlled by three gpio pins. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
| | * | | | | | | | | ARM: dts: at91: Disable SPI on at91sam9x5ek to allow MCI1 to work.Cristian Birsan2017-03-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The A13 hardware line is shared by SPI and MCI1 controller.This patch disables the SPI controller so that the MCI1 (the big MMC card slot) can be used. Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
| | * | | | | | | | | ARM: dts: at91: Fix matrix compatibleBoris Brezillon2017-03-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The matrix node was defined before the documentation for the bus matrix configuration was submitted. Patch the device tree to match the DT doc. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
| | * | | | | | | | | ARM: dts: at91: sama5d2_xplained: enable RTC wakeupAlexandre Belloni2017-03-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sama5d2 Xplained can wake up with its RTC. Enable that feature. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
| | * | | | | | | | | ARM: dts: at91: sama5d2: add sfrbuAlexandre Belloni2017-03-05
| | | |_|/ / / / / / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SFRBU, the Special Function Registers Backup manage specific aspects of the integrated memory, bridge implementations, processor and other functionality not controlled elsewhere. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
| * | | | | | | | | Merge tag 'imx-dt-4.12' of ↵Olof Johansson2017-04-19
| |\ \ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt i.MX device tree updates for 4.12: - New board support: I2SE's i.MX28 Duckbill-2 boards, Gateworks Ventana i.MX6 GW5903/GW5904, Zodiac Inflight Innovations RDU2 board, Engicam i.CoreM6 Quad/Dual OpenFrame modules, Boundary Device i.MX6 Quad Plus SOM. - Improve compatible string for i.MX50 eSDHC, i.MX7S SRC devices and i.MX6SX UART device. - Add interrupts for switch and PHY devices on VF610 ZII Devel C board. - Add LVDS, LCD backlight, touchscreen and SAI2 support for i.MX6 icore, geam, and isiot boards. - A series from Lucas Stach to improve i.MX6Q Plus device tree and add PRE/PRG devices. - A series from Stefan Agner to update imx7-colibri device tree regarding to display, PMIC/regulator support. - Fix PCI bus DTC warnings seen with the latest compiler. - Set default phy_type and dr_mode for i.MX25 USBOTG port. - A couple of small improvements on i.MX25 pin function DT header. - Add audio support for imx6q-cm-fx6 board using Wolfson wm8731 codec which is muxed to SSI2 device. - Other random updates, small fixes and trivial cleanups. * tag 'imx-dt-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (56 commits) ARM: dts: imx6q-utilite-pro: add hpd gpio ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply ARM: dts: imx6qdl-sabresd: Set LDO regulator supply ARM: dts: imx: add Gateworks Ventana GW5903 support ARM: dts: i.MX25: add AIPS control registers ARM: dts: imx7-colibri: add Carrier Board 3.3V/5V regulators ARM: dts: imx7-colibri: remove 1.8V fixed regulator ARM: dts: imx7-colibri: allow to disable Ethernet rail ARM: dts: imx7-colibri: fix PMIC voltages ARM: dts: imx7-colibri: use OF graph to describe the display ARM: dts: imx6qp-nitrogen6_som2: add Quad Plus variant of the SOM ARM: dts: imx6q-icore: Add touchscreen node ARM: dts: vf610-zii-dev-rev-b: change switch2 label ARM: dts: imx6ul-[geam|isiot]: Add sai2 node ARM: dts: imx6ul-isiot-common: Add touchscreen node ARM: dts: imx6ul-isiot: Add i2c nodes ARM: dts: imx6ul-isiot: Add imx6ul-isiot-common.dtsi ARM: dts: imx6ul-isiot: Add backlight support for lcdif ARM: dts: imx6ul-geam: Add backlight support for lcdif ARM: dts: imx6: add ZII RDU2 boards ... Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | | | | | | | ARM: dts: imx6q-utilite-pro: add hpd gpioChristopher Spinrath2017-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The hpd pin of the second hdmi connector of the Utilite Pro is wired up to a gpio pin of the SoC. Reflect this in the device tree. Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | ARM: dts: imx6qp-sabresd: Set reg_arm regulator supplyLeonard Crestez2017-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On imx6qp-sabresd LDO_ARM is connected to a different PMIC output than the other imx6qdl-sabresd boards. Setting cpu0 arm-supply to sw2_reg is wrong, this must have mistakenly slipped out of the vendor tree where this is are used for LDO bypass. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | ARM: dts: imx6qdl-sabresd: Set LDO regulator supplyLeonard Crestez2017-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Setting the supply is optional but beneficial, it will cause PMIC voltages to be dynamically changed with cpu frequency. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | ARM: dts: imx: add Gateworks Ventana GW5903 supportTim Harvey2017-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Gateworks Ventana GW5903 is a single-board computer based on the NXP IMX6 SoC with the following features: * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q) * 4GiB DDR3 DRAM * 32GB eMMC * 1x microSD connector * Gateworks System Controller: - hardware watchdog - hardware monitor - pushbutton controller - EEPROM storage - power control * JTAG programmable * Inertial Module * uBlox EMMY-W1 (bluetooth/nfc/802.11ac) Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | ARM: dts: i.MX25: add AIPS control registersMartin Kaiser2017-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The i.MX25 contains two AHB to IP bridges (AIPS), each of which has a set of control registers. Add the memory regions for the control registers to the Device Tree. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | ARM: dts: imx7-colibri: add Carrier Board 3.3V/5V regulatorsStefan Agner2017-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Model the Carrier Board power distribution by adding a fixed 3.3V and 5V regulator. The 3.3V regulator is connected to the backlight as well as the display supply. The 5V regulator is used to supply USB VBUS. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | ARM: dts: imx7-colibri: remove 1.8V fixed regulatorStefan Agner2017-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ADC is directly supplied by the PMIC 1.8V rail, remove the superfluous fixed regulator. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | ARM: dts: imx7-colibri: allow to disable Ethernet railStefan Agner2017-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The regulator-always-on property on the Ethernet rail prevents Linux from disabling the rail when Ethernet is shut down (suspend or simply link down). With this change the regulator framework will disable the rail when the Ethernet PHY is not used, saving power especially on carrier board not using Ethernet. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | ARM: dts: imx7-colibri: fix PMIC voltagesStefan Agner2017-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix wrong voltage of PWR_EN_+V3.3 rail. The error had no noticeable effect since no consumer explicitly requested a specific voltage. Also use round voltages as it is common in other device trees. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | ARM: dts: imx7-colibri: use OF graph to describe the displayStefan Agner2017-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To make use of the new eLCDIF DRM driver OF graph description is required. Describe the display using OF graph nodes. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | ARM: dts: imx6qp-nitrogen6_som2: add Quad Plus variant of the SOMGary Bisson2017-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://boundarydevices.com/product/nit6x-som-v2/ Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | ARM: dts: imx6q-icore: Add touchscreen nodeJagan Teki2017-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | max11801 touchscreen on Engicam iCoreM6 Quad module is connected via i2c1, so add max11801: touchscreen@48 on i2c1. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Domenico Acri <domenico.acri@engicam.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | ARM: dts: vf610-zii-dev-rev-b: change switch2 labelVivien Didelot2017-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename the switch2@0 label of the switch2 node to switch@0 to respect the general unit@address DTS rule, and be consistent with the other switch nodes of the DTS file. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | ARM: dts: imx6ul-[geam|isiot]: Add sai2 nodeJagan Teki2017-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add Synchronous Audio Interface(SAI) node for Engicam GEAM6UL and Is.IoT MX6UL variant module boards. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | ARM: dts: imx6ul-isiot-common: Add touchscreen nodeJagan Teki2017-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add touchscreen node as i2c1 slave device on Engicam Is.IoT MX6UL modules, the touchscreen controlled 'st,stmpe-ts' connected via i2c with st,stmpe811 mfd interface. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | ARM: dts: imx6ul-isiot: Add i2c nodesJagan Teki2017-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for i2c nodes i2c1 and i2c2 on Is.IoT MX6UL eMMC variant boards. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | ARM: dts: imx6ul-isiot: Add imx6ul-isiot-common.dtsiJagan Teki2017-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | lcdif nodes are differ wrt specific LCD connected on Is.IoT MX6UL module, so create separate file 'imx6ul-isiot-common.dtsi' for common lcdif node structure and include the same on respective dts. More common nodes will add in future patches. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | ARM: dts: imx6ul-isiot: Add backlight support for lcdifJagan Teki2017-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add support for lcdif backlight on Is.IoT MX6UL variant boards. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | ARM: dts: imx6ul-geam: Add backlight support for lcdifJagan Teki2017-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add support for lcdif backlight on GEAM6UL variant boards. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | ARM: dts: imx6: add ZII RDU2 boardsLucas Stach2017-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the Zodiac Inflight Innovations RDU2 board, which has both a Quad and a QuadPlus variant. The board supports different panels, with the bootloader patching in the correct compatible, depending on the hardware configuration. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | ARM: dts: imx6qp: add PRG nodes and hook up to IPUsLucas Stach2017-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the DT nodes for the Prefetch Resolve Gaskets found on i.MX6QP and hook them up to the assigned IPU nodes. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | ARM: dts: imx6qp: add PRE nodesLucas Stach2017-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the DT nodes for the Prefetch Resolve Engines found on i.MX6QP. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | ARM: dts: imx: fix PCI bus dtc warningsRob Herring2017-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dtc recently added PCI bus checks. Fix these warnings. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | ARM: dts: imx25-pinfunc: Move MX25_PAD_TDO__TDO to a more sensible placeUwe Kleine-König2017-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pinfunc definitions are ordered by mux_reg and so automatically by conf_reg, too. PAD_TDO is the only pad that has a conf_reg but no mux_reg. Put it to the place where it its in the order of conf_regs instead of the top. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | ARM: dts: imx25-pinfunc: remove duplicate definitionUwe Kleine-König2017-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This was introduced in commit 18e2b50407fb ("ARM: dts: imx25-pinfunc: more defines"). Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | ARM: dts: imx: add Gateworks Ventana GW5904 supportTim Harvey2017-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Gateworks Ventana GW5904 is a single-board computer based on the NXP IMX6 SoC with the following features: * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q) * 2048MB DDR3 DRAM (4x64bit) (options up to 4GiB) * 8GB eMMC * Gateworks System Controller: - hardware watchdog - hardware monitor - pushbutton controller - EEPROM storage - power control * JTAG programmable * 1x miniPCIe socket (with PCIe, USB) * 1x miniPCIe socket (USB) * 1x M.2 socket (USB, 2x SIM) * Inertial Module (LSM9DS1 9DOF: 3x acc, 3x rate, 3x mag) * GPS (optional uBlox EVA-M8M) * Application headers: - 2x RS232 UART (TX/RX/CTS/RTS) - 8x TTL GPIO (3x configurable as PWM) - 1x LVDS display 3D+C with i2c touch and PWM backlight * MV88E6176 GbE Switch (uplink to IMX FEC) * Front panel connectors: - 1x user programmable LED - 1x configurable user pushbutton - 1x USB OTG - 4x GbE LAN Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | ARM: dts: imx7s: Do not claim i.MX51 compatibility for SRCAndrey Smirnov2017-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | System Reset Controller in i.MX7 doesn't have any commonality with IP block found in i.MX5 and i.MX6 SoC families. Given that and the new upstream driver for i.MX7 variant (see https://lkml.org/lkml/2017/2/21/466) remove "fsl,imx51-src" from compatibility string. Cc: yurovsky@gmail.com Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | | | ARM: dts: imx6q-icore: Add LVDS supportJagan Teki2017-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add LVDS display support for OpenFrame Capacitive touch 7 inc display which is supported by Engicam i.CoreM6 QDL Starter Kit. Cc: Domenico Acri <domenico.acri@engicam.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.2 (git 2.25.0) at 2025-08-05 00:50:15 -0400