aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
...
* clk: sunxi-ng: mp: Adjust parent rate for pre-dividersChen-Yu Tsai2017-03-30
| | | | | | | | | | | | | | | | | | commit ac8616e4c81dded650dfade49a7da283565d37ce upstream. The MP style clocks support an mux with pre-dividers. While the driver correctly accounted for them in the .determine_rate callback, it did not in the .recalc_rate and .set_rate callbacks. This means when calculating the factors in the .set_rate callback, they would be off by a factor of the active pre-divider. Same goes for reading back the clock rate after it is set. Fixes: 2ab836db5097 ("clk: sunxi-ng: Add M-P factor clock support") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: sunxi-ng: sun6i: Fix enable bit offset for hdmi-ddc module clockChen-Yu Tsai2017-03-30
| | | | | | | | | | | | | | commit 9ad0bb39fce319d7b92c17d306ed0a9f70a02e7d upstream. The enable bit offset for the hdmi-ddc module clock is wrong. It is pointing to the main hdmi module clock enable bit. Reported-by: Bob Ham <rah@settrans.net> Fixes: c6e6c96d8fa6 ("clk: sunxi-ng: Add A31/A31s clocks") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwrng: geode - Revert managed API changesPrarit Bhargava2017-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 8c75704ebcac2ffa31ee7bcc359baf701b52bf00 upstream. After commit e9afc746299d ("hwrng: geode - Use linux/io.h instead of asm/io.h") the geode-rng driver uses devres with pci_dev->dev to keep track of resources, but does not actually register a PCI driver. This results in the following issues: 1. The driver leaks memory because the driver does not attach to a device. The driver only uses the PCI device as a reference. devm_*() functions will release resources on driver detach, which the geode-rng driver will never do. As a result, 2. The driver cannot be reloaded because there is always a use of the ioport and region after the first load of the driver. Revert the changes made by e9afc746299d ("hwrng: geode - Use linux/io.h instead of asm/io.h"). Signed-off-by: Prarit Bhargava <prarit@redhat.com> Fixes: 6e9b5e76882c ("hwrng: geode - Migrate to managed API") Cc: Matt Mackall <mpm@selenic.com> Cc: Corentin LABBE <clabbe.montjoie@gmail.com> Cc: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: linux-crypto@vger.kernel.org Cc: linux-geode@lists.infradead.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwrng: amd - Revert managed API changesPrarit Bhargava2017-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 69db7009318758769d625b023402161c750f7876 upstream. After commit 31b2a73c9c5f ("hwrng: amd - Migrate to managed API"), the amd-rng driver uses devres with pci_dev->dev to keep track of resources, but does not actually register a PCI driver. This results in the following issues: 1. The message WARNING: CPU: 2 PID: 621 at drivers/base/dd.c:349 driver_probe_device+0x38c is output when the i2c_amd756 driver loads and attempts to register a PCI driver. The PCI & device subsystems assume that no resources have been registered for the device, and the WARN_ON() triggers since amd-rng has already do so. 2. The driver leaks memory because the driver does not attach to a device. The driver only uses the PCI device as a reference. devm_*() functions will release resources on driver detach, which the amd-rng driver will never do. As a result, 3. The driver cannot be reloaded because there is always a use of the ioport and region after the first load of the driver. Revert the changes made by 31b2a73c9c5f ("hwrng: amd - Migrate to managed API"). Signed-off-by: Prarit Bhargava <prarit@redhat.com> Fixes: 31b2a73c9c5f ("hwrng: amd - Migrate to managed API"). Cc: Matt Mackall <mpm@selenic.com> Cc: Corentin LABBE <clabbe.montjoie@gmail.com> Cc: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: linux-crypto@vger.kernel.org Cc: linux-geode@lists.infradead.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mmc: sdhci-pci: Do not disable interrupts in sdhci_intel_set_powerAdrian Hunter2017-03-30
| | | | | | | | | | | | | | | | | | | | | | | commit 027fb89e61054b4aedd962adb3e2003dec78a716 upstream. Disabling interrupts for even a millisecond can cause problems for some devices. That can happen when Intel host controllers wait for the present state to propagate. The spin lock is not necessary here. Anything that is racing with changes to the I/O state is already broken. The mmc core already provides synchronization via "claiming" the host. Although the spin lock probably should be removed from the code paths that lead to this point, such a patch would touch too much code to be suitable for stable trees. Consequently, for this patch, just drop the spin lock while waiting. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mmc: sdhci: Do not disable interrupts while waiting for clockAdrian Hunter2017-03-30
| | | | | | | | | | | | | | | | | | | | | | | commit e2ebfb2142acefecc2496e71360f50d25726040b upstream. Disabling interrupts for even a millisecond can cause problems for some devices. That can happen when sdhci changes clock frequency because it waits for the clock to become stable under a spin lock. The spin lock is not necessary here. Anything that is racing with changes to the I/O state is already broken. The mmc core already provides synchronization via "claiming" the host. Although the spin lock probably should be removed from the code paths that lead to this point, such a patch would touch too much code to be suitable for stable trees. Consequently, for this patch, just drop the spin lock while waiting. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mmc: sdhci-of-arasan: fix incorrect timeout clockAnssi Hannula2017-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 16681037e75ce08f2980ac5dbb03414429c7a55d upstream. sdhci_arasan_get_timeout_clock() divides the frequency it has with (1 << (13 + divisor)). However, the divisor is not some Arasan-specific value, but instead is just the Data Timeout Counter Value from the SDHCI Timeout Control Register. Applying it here like this is wrong as the sdhci driver already takes that value into account when calculating timeouts, and in fact it *sets* that register value based on how long a timeout is wanted. Additionally, sdhci core interprets the .get_timeout_clock callback return value as if it were read from hardware registers, i.e. the unit should be kHz or MHz depending on SDHCI_TIMEOUT_CLK_UNIT capability bit. This bit is set at least on the tested Zynq-7000 SoC. With the tested hardware (SDHCI_TIMEOUT_CLK_UNIT set) this results in too high a timeout clock rate being reported, causing the core to use longer-than-needed timeouts. Additionally, on a partitioned MMC (therefore having erase_group_def bit set) mmc_calc_max_discard() disables discard support as it looks like controller does not support the long timeouts needed for that. Do not apply the extra divisor and return the timeout clock in the expected unit. Tested with a Zynq-7000 SoC and a partitioned Toshiba THGBMAG5A1JBAWR eMMC card. Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Fixes: e3ec3a3d11ad ("mmc: arasan: Add driver for Arasan SDHCI") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mmc: sdhci-of-at91: Support external regulatorsRomain Izard2017-03-30
| | | | | | | | | | | | | | | | | | | | | commit 2ce0c7b65505e0d915e99389cced45b478dc935d upstream. The SDHCI controller in the SAMA5D2 chip requires a valid voltage set in the power control register, otherwise commands will fail with a timeout error. When using the regulator framework to specify the regulator used by the mmc device, the voltage is not configured, and it is not possible to use the connected device. Implement a custom 'set_power' function for this specific hardware, that configures the voltage in the register in all cases. Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc/64s: Fix idle wakeup potential to clobber registersNicholas Piggin2017-03-30
| | | | | | | | | | | | | | | | | | | | | commit 6d98ce0be541d4a3cfbb52cd75072c0339ebb500 upstream. We concluded there may be a window where the idle wakeup code could get to pnv_wakeup_tb_loss() (which clobbers non-volatile GPRs), but the hardware may set SRR1[46:47] to 01b (no state loss) which would result in the wakeup code failing to restore non-volatile GPRs. I was not able to trigger this condition with trivial tests on real hardware or simulator, but the ISA (at least 2.07) seems to allow for it, and Gautham says that it can happen if there is an exception pending when the sleep/winkle instruction is executed. Fixes: 1706567117ba ("powerpc/kvm: make hypervisor state restore a function") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ext4: lock the xattr block before checksuming itTheodore Ts'o2017-03-30
| | | | | | | | | | | | | | commit dac7a4b4b1f664934e8b713f529b629f67db313c upstream. We must lock the xattr block before calculating or verifying the checksum in order to avoid spurious checksum failures. https://bugzilla.kernel.org/show_bug.cgi?id=193661 Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ext4: mark inode dirty after converting inline directoryEric Biggers2017-03-30
| | | | | | | | | | | | | | | | | | | | | | | commit b9cf625d6ecde0d372e23ae022feead72b4228a6 upstream. If ext4_convert_inline_data() was called on a directory with inline data, the filesystem was left in an inconsistent state (as considered by e2fsck) because the file size was not increased to cover the new block. This happened because the inode was not marked dirty after i_disksize was updated. Fix this by marking the inode dirty at the end of ext4_finish_convert_inline_dir(). This bug was probably not noticed before because most users mark the inode dirty afterwards for other reasons. But if userspace executed FS_IOC_SET_ENCRYPTION_POLICY with invalid parameters, as exercised by 'kvm-xfstests -c adv generic/396', then the inode was never marked dirty after updating i_disksize. Fixes: 3c47d54170b6a678875566b1b8d6dcf57904e49b Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* parport: fix attempt to write duplicate procfilesSudip Mukherjee2017-03-30
| | | | | | | | | | | | | | | | | | | | | | commit 03270c6ac6207fc55bbf9d20d195029dca210c79 upstream. Usually every parallel port will have a single pardev registered with it. But ppdev driver is an exception. This userspace parallel port driver allows to create multiple parrallel port devices for a single parallel port. And as a result we were having a nice warning like: "sysctl table check failed: /dev/parport/parport0/devices/ppdev0/timeslice Sysctl already exists" Use the same logic as used in parport_register_device() and register the proc files only once for each parallel port. Fixes: 6fa45a226897 ("parport: add device-model to parport subsystem") Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1414656 Bugzilla: https://bugs.archlinux.org/task/52322 Tested-by: James Feeney <james@nurealm.net> Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iio: magnetometer: ak8974: remove incorrect __exit markupsDmitry Torokhov2017-03-30
| | | | | | | | | | | | | | | | commit 3ff861f59f6c1f5bf2bc03d2cd36ac3f992cbc06 upstream. Even if bus is not hot-pluggable, devices can be unbound from the driver via sysfs, so we should not be using __exit annotations on remove() methods. The only exception is drivers registered with platform_driver_probe() which specifically disables sysfs bind/unbind attributes. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iio: hid-sensor-trigger: Change get poll value function order to avoid ↵Song Hongyan2017-03-30
| | | | | | | | | | | | | | | | | | | | | | | | sensor properties losing after resume from S3 commit 3bec247474469f769af41e8c80d3a100dd97dd76 upstream. In function _hid_sensor_power_state(), when hid_sensor_read_poll_value() is called, sensor's all properties will be updated by the value from sensor hardware/firmware. In some implementation, sensor hardware/firmware will do a power cycle during S3. In this case, after resume, once hid_sensor_read_poll_value() is called, sensor's all properties which are kept by driver during S3 will be changed to default value. But instead, if a set feature function is called first, sensor hardware/firmware will be recovered to the last status. So change the sensor_hub_set_feature() calling order to behind of set feature function to avoid sensor properties lose. Signed-off-by: Song Hongyan <hongyan.song@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iio: sw-device: Fix config group initializationLars-Peter Clausen2017-03-30
| | | | | | | | | | | | | | | | | | | | | commit c42f8218610aa09d7d3795e5810387673c1f84b6 upstream. Use the IS_ENABLED() helper macro to ensure that the configfs group is initialized either when configfs is built-in or when configfs is built as a module. Otherwise software device creation will result in undefined behaviour when configfs is built as a module since the configfs group for the device not properly initialized. Similar to commit b2f0c09664b7 ("iio: sw-trigger: Fix config group initialization"). Fixes: 0f3a8c3f34f7 ("iio: Add support for creating IIO devices via configfs") Reported-by: Miguel Robles <miguel.robles@farole.net> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iio: adc: ti_am335x_adc: fix fifo overrun recoveryMichael Engl2017-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit e83bb3e6f3efa21f4a9d883a25d0ecd9dfb431e1 upstream. The tiadc_irq_h(int irq, void *private) function is handling FIFO overruns by clearing flags, disabling and enabling the ADC to recover. If the ADC is running in continuous mode a FIFO overrun happens regularly. If the disabling of the ADC happens concurrently with a new conversion. It might happen that the enabling of the ADC is ignored by the hardware. This stops the ADC permanently. No more interrupts are triggered. According to the AM335x Reference Manual (SPRUH73H October 2011 - Revised April 2013 - Chapter 12.4 and 12.5) it is necessary to check the ADC FSM bits in REG_ADCFSM before enabling the ADC again. Because the disabling of the ADC is done right after the current conversion has been finished. To trigger this bug it is necessary to run the ADC in continuous mode. The ADC values of all channels need to be read in an endless loop. The bug appears within the first 6 hours (~5.4 million handled FIFO overruns). The user space application will hang on reading new values from the character device. Fixes: ca9a563805f7a ("iio: ti_am335x_adc: Add continuous sampling support") Signed-off-by: Michael Engl <michael.engl@wjw-solutions.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mmc: ushc: fix NULL-deref at probeJohan Hovold2017-03-30
| | | | | | | | | | | | | | commit 181302dc7239add8ab1449c23ecab193f52ee6ab upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: 53f3a9e26ed5 ("mmc: USB SD Host Controller (USHC) driver") Cc: David Vrabel <david.vrabel@csr.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* uwb: hwa-rc: fix NULL-deref at probeJohan Hovold2017-03-30
| | | | | | | | | | | | | | | | | commit daf229b15907fbfdb6ee183aac8ca428cb57e361 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Note that the dereference happens in the start callback which is called during probe. Fixes: de520b8bd552 ("uwb: add HWA radio controller driver") Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Cc: David Vrabel <david.vrabel@csr.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* uwb: i1480-dfu: fix NULL-deref at probeJohan Hovold2017-03-30
| | | | | | | | | | | | | | | | | commit 4ce362711d78a4999011add3115b8f4b0bc25e8c upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Note that the dereference happens in the cmd and wait_init_done callbacks which are called during probe. Fixes: 1ba47da52712 ("uwb: add the i1480 DFU driver") Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Cc: David Vrabel <david.vrabel@csr.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: usbtmc: fix probe error pathJohan Hovold2017-03-30
| | | | | | | | | | | | | | | commit 2e47c53503eb9faff42b3cfa144a833344dd1f89 upstream. Make sure to initialise the return value to avoid having allocation failures going unnoticed when allocating interrupt-endpoint resources. This prevents use-after-free or worse when the device is later unbound. Fixes: dbf3e7f654c0 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation.") Cc: Dave Penkler <dpenkler@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: usbtmc: add missing endpoint sanity checkJohan Hovold2017-03-30
| | | | | | | | | | | | | | | | | | | | | | | commit 687e0687f71ec00e0132a21fef802dee88c2f1ad upstream. USBTMC devices are required to have a bulk-in and a bulk-out endpoint, but the driver failed to verify this, something which could lead to the endpoint addresses being taken from uninitialised memory. Make sure to zero all private data as part of allocation, and add the missing endpoint sanity check. Note that this also addresses a more recently introduced issue, where the interrupt-in-presence flag would also be uninitialised whenever the optional interrupt-in endpoint is not present. This in turn could lead to an interrupt urb being allocated, initialised and submitted based on uninitialised values. Fixes: dbf3e7f654c0 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation.") Fixes: 5b775f672cc9 ("USB: add USB test and measurement class driver") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: hub: Fix crash after failure to read BOS descriptorGuenter Roeck2017-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 7b2db29fbb4e766fcd02207eb2e2087170bd6ebc upstream. If usb_get_bos_descriptor() returns an error, usb->bos will be NULL. Nevertheless, it is dereferenced unconditionally in hub_set_initial_usb2_lpm_policy() if usb2_hw_lpm_capable is set. This results in a crash. usb 5-1: unable to get BOS descriptor ... Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = ffffffc00165f000 [00000008] *pgd=000000000174f003, *pud=000000000174f003, *pmd=0000000001750003, *pte=00e8000001751713 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: uinput uvcvideo videobuf2_vmalloc cmac [ ... ] CPU: 5 PID: 3353 Comm: kworker/5:3 Tainted: G B 4.4.52 #480 Hardware name: Google Kevin (DT) Workqueue: events driver_set_config_work task: ffffffc0c3690000 ti: ffffffc0ae9a8000 task.ti: ffffffc0ae9a8000 PC is at hub_port_init+0xc3c/0xd10 LR is at hub_port_init+0xc3c/0xd10 ... Call trace: [<ffffffc0007fbbfc>] hub_port_init+0xc3c/0xd10 [<ffffffc0007fbe2c>] usb_reset_and_verify_device+0x15c/0x82c [<ffffffc0007fc5e0>] usb_reset_device+0xe4/0x298 [<ffffffbffc0e3fcc>] rtl8152_probe+0x84/0x9b0 [r8152] [<ffffffc00080ca8c>] usb_probe_interface+0x244/0x2f8 [<ffffffc000774a24>] driver_probe_device+0x180/0x3b4 [<ffffffc000774e48>] __device_attach_driver+0xb4/0xe0 [<ffffffc000772168>] bus_for_each_drv+0xb4/0xe4 [<ffffffc0007747ec>] __device_attach+0xd0/0x158 [<ffffffc000775080>] device_initial_probe+0x24/0x30 [<ffffffc0007739d4>] bus_probe_device+0x50/0xe4 [<ffffffc000770bd0>] device_add+0x414/0x738 [<ffffffc000809fe8>] usb_set_configuration+0x89c/0x914 [<ffffffc00080a120>] driver_set_config_work+0xc0/0xf0 [<ffffffc000249bb8>] process_one_work+0x390/0x6b8 [<ffffffc00024abcc>] worker_thread+0x480/0x610 [<ffffffc000251a80>] kthread+0x164/0x178 [<ffffffc0002045d0>] ret_from_fork+0x10/0x40 Since we don't know anything about LPM capabilities without BOS descriptor, don't attempt to enable LPM if it is not available. Fixes: 890dae886721 ("xhci: Enable LPM support only for hardwired ...") Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: musb: cppi41: don't check early-TX-interrupt for Isoch transferBin Liu2017-03-30
| | | | | | | | | | | | | | | | | | | | commit 0090114d336a9604aa2d90bc83f20f7cd121b76c upstream. The CPPI 4.1 driver polls register to workaround the premature TX interrupt issue, but it causes audio playback underrun when triggered in Isoch transfers. Isoch doesn't do back-to-back transfers, the TX should be done by the time the next transfer is scheduled. So skip this polling workaround for Isoch transfer. Fixes: a655f481d83d6 ("usb: musb: musb_cppi41: handle pre-mature TX complete interrupt") Reported-by: Alexandre Bailon <abailon@baylibre.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Alexandre Bailon <abailon@baylibre.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: wusbcore: fix NULL-deref at probeJohan Hovold2017-03-30
| | | | | | | | | | | | | | | | | | commit 03ace948a4eb89d1cf51c06afdfc41ebca5fdb27 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. This specifically fixes the NULL-pointer dereference when probing HWA HC devices. Fixes: df3654236e31 ("wusb: add the Wire Adapter (WA) core") Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Cc: David Vrabel <david.vrabel@csr.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: idmouse: fix NULL-deref at probeJohan Hovold2017-03-30
| | | | | | | | | | | | commit b0addd3fa6bcd119be9428996d5d4522479ab240 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: lvtest: fix NULL-deref at probeJohan Hovold2017-03-30
| | | | | | | | | | | | | | | commit 1dc56c52d2484be09c7398a5207d6b11a4256be9 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should the probed device lack endpoints. Note that this driver does not bind to any devices by default. Fixes: ce21bfe603b3 ("USB: Add LVS Test device driver") Cc: Pratyush Anand <pratyush.anand@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: uss720: fix NULL-deref at probeJohan Hovold2017-03-30
| | | | | | | | | | | | | | | | | | | commit f259ca3eed6e4b79ac3d5c5c9fb259fb46e86217 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. Note that the endpoint access that causes the NULL-deref is currently only used for debugging purposes during probe so the oops only happens when dynamic debugging is enabled. This means the driver could be rewritten to continue to accept device with only two endpoints, should such devices exist. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb-core: Add LINEAR_FRAME_INTR_BINTERVAL USB quirkSamuel Thibault2017-03-30
| | | | | | | | | | | | | | | | | | | | | | | | commit 3243367b209faed5c320a4e5f9a565ee2a2ba958 upstream. Some USB 2.0 devices erroneously report millisecond values in bInterval. The generic config code manages to catch most of them, but in some cases it's not completely enough. The case at stake here is a USB 2.0 braille device, which wants to announce 10ms and thus sets bInterval to 10, but with the USB 2.0 computation that yields to 64ms. It happens that one can type fast enough to reach this interval and get the device buffers overflown, leading to problematic latencies. The generic config code does not catch this case because the 64ms is considered a sane enough value. This change thus adds a USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL quirk to mark devices which actually report milliseconds in bInterval, and marks Vario Ultra devices as needing it. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: gadget: f_uvc: Fix SuperSpeed companion descriptor's wBytesPerIntervalRoger Quadros2017-03-30
| | | | | | | | | | | | | | | | | | | | commit 09424c50b7dff40cb30011c09114404a4656e023 upstream. The streaming_maxburst module parameter is 0 offset (0..15) so we must add 1 while using it for wBytesPerInterval calculation for the SuperSpeed companion descriptor. Without this host uvcvideo driver will always see the wrong wBytesPerInterval for SuperSpeed uvc gadget and may not find a suitable video interface endpoint. e.g. for streaming_maxburst = 0 case it will always fail as wBytePerInterval was evaluating to 0. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ACM gadget: fix endianness in notificationsOliver Neukum2017-03-30
| | | | | | | | | | | | | commit cdd7928df0d2efaa3270d711963773a08a4cc8ab upstream. The gadget code exports the bitfield for serial status changes over the wire in its internal endianness. The fix is to convert to little endian before sending it over the wire. Signed-off-by: Oliver Neukum <oneukum@suse.com> Tested-by: 家瑋 <momo1208@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: qcserial: add Dell DW5811eBjørn Mork2017-03-30
| | | | | | | | | | | commit 436ecf5519d892397af133a79ccd38a17c25fa51 upstream. This is a Dell branded Sierra Wireless EM7455. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: option: add Quectel UC15, UC20, EC21, and EC25 modemsDan Williams2017-03-30
| | | | | | | | | | | | | commit 6e9f44eaaef0df7b846e9316fa9ca72a02025d44 upstream. Add Quectel UC15, UC20, EC21, and EC25. The EC20 is handled by qcserial due to a USB VID/PID conflict with an existing Acer device. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: hda - Adding a group of pin definition to fix headset problemHui Wang2017-03-30
| | | | | | | | | | | | | commit 3f307834e695f59dac4337a40316bdecfb9d0508 upstream. A new Dell laptop needs to apply ALC269_FIXUP_DELL1_MIC_NO_PRESENCE to fix the headset problem, and the pin definiton of this machine is not in the pin quirk table yet, now adding it to the table. Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: ctxfi: Fix the incorrect check of dma_set_mask() callTakashi Iwai2017-03-30
| | | | | | | | | | | | | | | | | commit f363a06642f28caaa78cb6446bbad90c73fe183c upstream. In the commit [15c75b09f8d1: ALSA: ctxfi: Fallback DMA mask to 32bit], I forgot to put "!" at dam_set_mask() call check in cthw20k1.c (while cthw20k2.c is OK). This patch fixes that obvious bug. (As a side note: although the original commit was completely wrong, it's still working for most of machines, as it sets to 32bit DMA mask in the end. So the bug severity is low.) Fixes: 15c75b09f8d1 ("ALSA: ctxfi: Fallback DMA mask to 32bit") Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: seq: Fix racy cell insertions during snd_seq_pool_done()Takashi Iwai2017-03-30
| | | | | | | | | | | | | | | | | | | | commit c520ff3d03f0b5db7146d9beed6373ad5d2a5e0e upstream. When snd_seq_pool_done() is called, it marks the closing flag to refuse the further cell insertions. But snd_seq_pool_done() itself doesn't clear the cells but just waits until all cells are cleared by the caller side. That is, it's racy, and this leads to the endless stall as syzkaller spotted. This patch addresses the racy by splitting the setup of pool->closing flag out of snd_seq_pool_done(), and calling it properly before snd_seq_pool_done(). BugLink: http://lkml.kernel.org/r/CACT4Y+aqqy8bZA1fFieifNxR2fAfFQQABcBHj801+u5ePV0URw@mail.gmail.com Reported-and-tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Input: sur40 - validate number of endpoints before using themJohan Hovold2017-03-30
| | | | | | | | | | | | | | commit 92461f5d723037530c1f36cce93640770037812c upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory that lie beyond the end of the endpoint array should a malicious device lack the expected endpoints. Fixes: bdb5c57f209c ("Input: add sur40 driver for Samsung SUR40... ") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Input: kbtab - validate number of endpoints before using themJohan Hovold2017-03-30
| | | | | | | | | | | | commit cb1b494663e037253337623bf1ef2df727883cb7 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Input: cm109 - validate number of endpoints before using themJohan Hovold2017-03-30
| | | | | | | | | | | | | commit ac2ee9ba953afe88f7a673e1c0c839227b1d7891 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: c04148f915e5 ("Input: add driver for USB VoIP phones with CM109...") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Input: yealink - validate number of endpoints before using themJohan Hovold2017-03-30
| | | | | | | | | | | | | commit 5cc4a1a9f5c179795c8a1f2b0f4361829d6a070e upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: aca951a22a1d ("[PATCH] input-driver-yealink-P1K-usb-phone") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Input: hanwang - validate number of endpoints before using themJohan Hovold2017-03-30
| | | | | | | | | | | | | commit ba340d7b83703768ce566f53f857543359aa1b98 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: bba5394ad3bd ("Input: add support for Hanwang tablets") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Input: ims-pcu - validate number of endpoints before using themJohan Hovold2017-03-30
| | | | | | | | | | | | | commit 1916d319271664241b7aa0cd2b05e32bdb310ce9 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack control-interface endpoints. Fixes: 628329d52474 ("Input: add IMS Passenger Control Unit driver") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Input: iforce - validate number of endpoints before using themJohan Hovold2017-03-30
| | | | | | | | | | | | | commit 59cf8bed44a79ec42303151dd014fdb6434254bb upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory that lie beyond the end of the endpoint array should a malicious device lack the expected endpoints. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Input: i8042 - add noloop quirk for Dell Embedded Box PC 3000Kai-Heng Feng2017-03-30
| | | | | | | | | | | | | | | | commit 45838660e34d90db8d4f7cbc8fd66e8aff79f4fe upstream. The aux port does not get detected without noloop quirk, so external PS/2 mouse cannot work as result. The PS/2 mouse can work with this quirk. BugLink: https://bugs.launchpad.net/bugs/1591053 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Input: elan_i2c - add ASUS EeeBook X205TA special touchpad fwMatjaz Hegedic2017-03-30
| | | | | | | | | | | | | | | commit 92ef6f97a66e580189a41a132d0f8a9f78d6ddce upstream. EeeBook X205TA is yet another ASUS device with a special touchpad firmware that needs to be accounted for during initialization, or else the touchpad will go into an invalid state upon suspend/resume. Adding the appropriate ic_type and product_id check fixes the problem. Signed-off-by: Matjaz Hegedic <matjaz.hegedic@gmail.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Input: ALPS - fix trackstick button handling on V8 devicesMasaki Ota2017-03-30
| | | | | | | | | | | | | | | | commit 47e6fb4212d09f325c0847d05985dd3d71553095 upstream. Alps stick devices always have physical buttons, so we should not check ALPS_BUTTONPAD flag to decide whether we should report them. Fixes: 4777ac220c43 ("Input: ALPS - add touchstick support for SS5 hardware") Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com> Acked-by: Pali Rohar <pali.rohar@gmail.com> Tested-by: Paul Donohue <linux-kernel@PaulSD.com> Tested-by: Nick Fletcher <nick.m.fletcher@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Input: ALPS - fix V8+ protocol handling (73 03 28)Masaki Ota2017-03-30
| | | | | | | | | | | | | | | | | commit e7348396c6d51b57c95c6646c390cd078e038e19 upstream. Devices identified as E7="73 03 28" use slightly modified version of V8 protocol, with lower count per electrode, different offsets, and different feature bits in OTP data. Fixes: aeaa881f9b17 ("Input: ALPS - set DualPoint flag for 74 03 28 devices") Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com> Acked-by: Pali Rohar <pali.rohar@gmail.com> Tested-by: Paul Donohue <linux-kernel@PaulSD.com> Tested-by: Nick Fletcher <nick.m.fletcher@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tcp: initialize icsk_ack.lrcvtime at session start timeEric Dumazet2017-03-30
| | | | | | | | | | | | | | | | | [ Upstream commit 15bb7745e94a665caf42bfaabf0ce062845b533b ] icsk_ack.lrcvtime has a 0 value at socket creation time. tcpi_last_data_recv can have bogus value if no payload is ever received. This patch initializes icsk_ack.lrcvtime for active sessions in tcp_finish_connect(), and for passive sessions in tcp_create_openreq_child() Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* socket, bpf: fix sk_filter use after free in sk_clone_lockDaniel Borkmann2017-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit a97e50cc4cb67e1e7bff56f6b41cda62ca832336 ] In sk_clone_lock(), we create a new socket and inherit most of the parent's members via sock_copy() which memcpy()'s various sections. Now, in case the parent socket had a BPF socket filter attached, then newsk->sk_filter points to the same instance as the original sk->sk_filter. sk_filter_charge() is then called on the newsk->sk_filter to take a reference and should that fail due to hitting max optmem, we bail out and release the newsk instance. The issue is that commit 278571baca2a ("net: filter: simplify socket charging") wrongly combined the dismantle path with the failure path of xfrm_sk_clone_policy(). This means, even when charging failed, we call sk_free_unlock_clone() on the newsk, which then still points to the same sk_filter as the original sk. Thus, sk_free_unlock_clone() calls into __sk_destruct() eventually where it tests for present sk_filter and calls sk_filter_uncharge() on it, which potentially lets sk_omem_alloc wrap around and releases the eBPF prog and sk_filter structure from the (still intact) parent. Fix it by making sure that when sk_filter_charge() failed, we reset newsk->sk_filter back to NULL before passing to sk_free_unlock_clone(), so that we don't mess with the parents sk_filter. Only if xfrm_sk_clone_policy() fails, we did reach the point where either the parent's filter was NULL and as a result newsk's as well or where we previously had a successful sk_filter_charge(), thus for that case, we do need sk_filter_uncharge() to release the prior taken reference on sk_filter. Fixes: 278571baca2a ("net: filter: simplify socket charging") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipv4: provide stronger user input validation in nl_fib_input()Eric Dumazet2017-03-30
| | | | | | | | | | | | | | | | | | [ Upstream commit c64c0b3cac4c5b8cb093727d2c19743ea3965c0b ] Alexander reported a KMSAN splat caused by reads of uninitialized field (tb_id_in) from user provided struct fib_result_nl It turns out nl_fib_input() sanity tests on user input is a bit wrong : User can pretend nlh->nlmsg_len is big enough, but provide at sendmsg() time a too small buffer. Reported-by: Alexander Potapenko <glider@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: bcmgenet: remove bcmgenet_internal_phy_setup()Doug Berger2017-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 31739eae738ccbe8b9d627c3f2251017ca03f4d2 ] Commit 6ac3ce8295e6 ("net: bcmgenet: Remove excessive PHY reset") removed the bcmgenet_mii_reset() function from bcmgenet_power_up() and bcmgenet_internal_phy_setup() functions. In so doing it broke the reset of the internal PHY devices used by the GENETv1-GENETv3 which required this reset before the UniMAC was enabled. It also broke the internal GPHY devices used by the GENETv4 because the config_init that installed the AFE workaround was no longer occurring after the reset of the GPHY performed by bcmgenet_phy_power_set() in bcmgenet_internal_phy_setup(). In addition the code in bcmgenet_internal_phy_setup() related to the "enable APD" comment goes with the bcmgenet_mii_reset() so it should have also been removed. Commit bd4060a6108b ("net: bcmgenet: Power on integrated GPHY in bcmgenet_power_up()") moved the bcmgenet_phy_power_set() call to the bcmgenet_power_up() function, but failed to remove it from the bcmgenet_internal_phy_setup() function. Had it done so, the bcmgenet_internal_phy_setup() function would have been empty and could have been removed at that time. Commit 5dbebbb44a6a ("net: bcmgenet: Software reset EPHY after power on") was submitted to correct the functional problems introduced by commit 6ac3ce8295e6 ("net: bcmgenet: Remove excessive PHY reset"). It was included in v4.4 and made available on 4.3-stable. Unfortunately, it didn't fully revert the commit because this bcmgenet_mii_reset() doesn't apply the soft reset to the internal GPHY used by GENETv4 like the previous one did. This prevents the restoration of the AFE work- arounds for internal GPHY devices after the bcmgenet_phy_power_set() in bcmgenet_internal_phy_setup(). This commit takes the alternate approach of removing the unnecessary bcmgenet_internal_phy_setup() function which shouldn't have been in v4.3 so that when bcmgenet_mii_reset() was restored it should have only gone into bcmgenet_power_up(). This will avoid the problems while also removing the redundancy (and hopefully some of the confusion). Fixes: 6ac3ce8295e6 ("net: bcmgenet: Remove excessive PHY reset") Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.2 (git 2.25.0) at 2025-08-04 18:07:16 -0400