aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* ARM: dts: armada-38x: change order of ethernet DT nodes on Armada 38xThomas Petazzoni2016-02-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Armada 38x, the available network interfaces are: - port 0, at 0x70000 - port 1, at 0x30000 - port 2, at 0x34000 Due to the rule saying that DT nodes should be ordered by register addresses, the network interfaces are probed in this order: - port 1, at 0x30000, which gets named eth0 - port 2, at 0x34000, which gets named eth1 - port 0, at 0x70000, which gets named eth2 (if all three ports are enabled at the board level) Unfortunately, the network subsystem doesn't provide any way to rename network interfaces from the kernel (it can only be done from userspace). So, the default naming of the network interfaces is very confusing as it doesn't match the datasheet, nor the naming of the interfaces in the bootloader, nor the naming of the interfaces on labels printed on the board. For example, on the Armada 388 GP, the board has two ports, labelled GE0 and GE1. One has to know that GE0 is eth1 and GE1 is eth0, which isn't really obvious. In order to solve this, this patch proposes to exceptionaly violate the rule of "order DT nodes by register address", and put the 0x70000 node before the 0x30000 node, so that network interfaces get named in a more natural way. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* Merge branch 'mvebu/fixes' into mvebu/dtGregory CLEMENT2016-02-09
|\
| * ARM: dts: orion5x: fix the missing mtd flash on linkstation lswtglRoger Shimizu2016-02-09
| | | | | | | | | | | | | | | | | | | | MTD flash stores u-boot and u-boot environment on linkstation lswtgl. The latter one can be easily read/write by u-boot-tools package in Debian. Fixes: dc57844a736f ("ARM: dts: orion5x: add buffalo linkstation ls-wtgl") Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
| * ARM: dts: kirkwood: use unique machine name for ds112Heinrich Schuchardt2016-02-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Downstream packages like Debian flash-kernel use /proc/device-tree/model to determine which dtb file to install. Hence each dts in the Linux kernel should provide a unique model identifier. Commit 2d0a7addbd10 ("ARM: Kirkwood: Add support for many Synology NAS devices") created the new files kirkwood-ds111.dts and kirkwood-ds112.dts using the same model identifier. This patch provides a unique model identifier for the Synology DiskStation DS112. Fixes: 2d0a7addbd10 ("ARM: Kirkwood: Add support for many Synology NAS devices") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* | ARM: dts: kirkwood: add device tree for buffalo linkstation ls-qvlMario Lange2016-02-09
| | | | | | | | | | | | | | | | | | | | | | | | | | Add dts file to support Buffalo Linkstation LS-QVL, which is marvell kirkwood based 4-bay 3.5" HDD NAS. Product info: - (JPN) http://buffalo.jp/product/hdd/network/ls-qvl_r5/ - (ENG) http://www.buffalotech.com/products/network-storage/home-and-small-office/linkstation-pro-quad Signed-off-by: Mario Lange <mario_lange@gmx.net> Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* | ARM: dts: kirkwood: fix audio for OpenRD clientsAaro Koskinen2016-02-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix audio on kirkwood-openrd-client: 1) The audio-controller was left disabled. 2) The probe fails because cs42l51 is missing #sound-dai-cells. /sound/simple-audio-card,codec: could not get #sound-dai-cells for /ocp@f1000000/i2c@11000/cs42l51@4a asoc-simple-card sound: parse error -22 asoc-simple-card: probe of sound failed with error -22 3) The mapping is incorrect: asoc-simple-card sound: cs42l51-hifi <-> spdif mapping ok should be: asoc-simple-card sound: cs42l51-hifi <-> i2s mapping ok Reported-by: Rick Thomas <rbthomas@pobox.com> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Rick Thomas <rbthomas@pobox.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* | ARM: dts: kirkwood: provide template for RS-232/485 configuration for OpenRDAaro Koskinen2016-02-09
| | | | | | | | | | | | | | | | | | | | | | | | Some OpenRD boards have RS-232 and RS-486 connectors wired, but using them needs a custom DTB as the current DTB configures SD card slot instead. This patch adds documentation into the DTS on how to change the configuration. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* | ARM: dts: kirkwood: split lswvl dts to linkstation lsvl and lswvlRoger Shimizu2016-02-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LS-WVL/VL are both kirkwood-6282 based NAS devices, which share many MPP pins. However they are slightly different: - LS-WVL is 2-Bay NAS, and LS-VL is only 1-Bay. - There're two red LED indicator on LS-WVL to show when HDD fails, which is similar to LS-WXL, but there's no such on LS-VL. So after the split, common part goes into .dtsi file: - kirkwood-linkstation-6282.dtsi while all rest part goes into device specific .dts file: - kirkwood-linkstation-lsvl.dts - kirkwood-linkstation-lswvl.dts Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* | ARM: dts: kirkwood: split lswxl dts to linkstation lswsxl and lswxlRoger Shimizu2016-02-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LS-WXL/WSXL are both kirkwood-6281 based 2-Bay NAS devices, which share many MPP pins. However they are slightly different: - There're two red LED indicator on LS-WXL to show when HDD fails, but there's no such on LS-WSXL. - There's 4-level speed adjustable FAN on LS-WXL, but not LS-WSXL. So after the split, common part goes into .dtsi file: - kirkwood-linkstation.dtsi - kirkwood-linkstation-duo-6281.dtsi while all rest part goes into device specific .dts file: - kirkwood-linkstation-lswsxl.dts - kirkwood-linkstation-lswxl.dts Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* | ARM: dts: kirkwood: relicense dts of ls-wvl/vl and ls-wxl/wsxl under GPLv2/X11Roger Shimizu2016-02-09
| | | | | | | | | | | | Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* | ARM: dts: kirkwood: fix SD slot default configuration for OpenRDAaro Koskinen2016-02-09
| | | | | | | | | | | | | | | | | | | | The SD card slot was enabled by default with legacy booting. It does not work anymore with DT boot. Fix by providing GPIO configuration that matches the old default. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* | ARM: dts: kirkwood: fix pin names for UART/SD selection for OpenRDAaro Koskinen2016-02-09
| | | | | | | | | | | | | | | | The UART/SD pin names are swapped, fix that. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* | ARM: dts: armada-370: Update the mpp63 function in the device tree on Armada 370Gregory CLEMENT2016-02-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the commit a526973e0291 ("pinctrl: mvebu: Fix mapping of pin 63 (gpo -> gpio)"), the mpp63 is no more declared as a GPO but is a GPIO. Even if in the datasheet this pin is described as GPO, the experience of the D-Link DNS-327L board shows that it can be used as a GPIO. This commits generated warnings for the board using this pin as gpo, with this patch the dts are fixed by using the new function (gpio) instead of the old one. The binding documentation has also been updated accordingly. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net>
* | ARM: dts: armada-38x: use usb-nop-xceiv PHY for the xhci nodes on Armada 388 GPGregory CLEMENT2016-02-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Using the usb-nop-xceiv PHY for the xhci nodes allows a better representation of the hardware but also a better handling of the regulator. By linking the regulator to the PHY there is no more need to use the regulator-always-on property, then it allows a better power management. The remaining usb node uses the ehci-orion driver which can't be used with the usb-nop-xceiv PHY and must keeps the direct link to the regulator with the regulator-always-on property. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* | ARM: dts: armada-38x: use regulator-boot-on for SATA regulators on Armada 388 GPThomas Petazzoni2016-02-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Really, what we meant by regulator-always-on is that the regulators are already turned on by the bootloader, for which regulator-boot-on is a better description. A net advantage of using regulator-boot-on is that the regulator is not touched at boot time by the kernel, which avoids having the hard drives spinning down and then up again, taking several (~5) seconds of additional boot time. In addition, there is no need to have such properties on the child regulators used for SATA. Having it on the parent regulator that really controls the GPIO is sufficient. Without the patch: [ 3.945866] ata2: SATA link down (SStatus 0 SControl 300) [ 3.995862] ata3: SATA link down (SStatus 0 SControl 300) [ 4.005863] ata4: SATA link down (SStatus 0 SControl 300) [ 9.125861] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9.144575] ata1.00: ATA-8: WDC WD5003ABYX-01WERA1, 01.01S02, max UDMA/133 [ 9.151471] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) (and you can hear the disk spinning down and up during this 5.1 seconds delay) With the patch: [ 3.945988] ata2: SATA link down (SStatus 0 SControl 300) [ 4.005980] ata4: SATA link down (SStatus 0 SControl 300) [ 4.011404] ata3: SATA link down (SStatus 0 SControl 300) [ 4.145978] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.153701] ata1.00: ATA-8: WDC WD5003ABYX-01WERA1, 01.01S02, max UDMA/133 [ 4.160597] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* | ARM: dts: armada-38x: adjust board name and compatible for Armada 388 GPThomas Petazzoni2016-02-09
| | | | | | | | | | | | | | | | | | As the name of the Device Tree file name suggests, the Armada 388 GP really contains an Armada 388 SoC, so this commit updates the board name and compatible string in the Device Tree file. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* | Linux 4.5-rc3Linus Torvalds2016-02-07
| |
* | Merge tag 'armsoc-fixes' of ↵Linus Torvalds2016-02-07
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "The first real batch of fixes for this release cycle, so there are a few more than usual. Most of these are fixes and tweaks to board support (DT bugfixes, etc). I've also picked up a couple of small cleanups that seemed innocent enough that there was little reason to wait (const/ __initconst and Kconfig deps). Quite a bit of the changes on OMAP were due to fixes to no longer write to rodata from assembly when ARM_KERNMEM_PERMS was enabled, but there were also other fixes. Kirkwood had a bunch of gpio fixes for some boards. OMAP had RTC fixes on OMAP5, and Nomadik had changes to MMC parameters in DT. All in all, mostly the usual mix of various fixes" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits) ARM: multi_v7_defconfig: enable DW_WATCHDOG ARM: nomadik: fix up SD/MMC DT settings ARM64: tegra: Add chosen node for tegra132 norrin ARM: realview: use "depends on" instead of "if" after prompt ARM: tango: use "depends on" instead of "if" after prompt ARM: tango: use const and __initconst for smp_operations ARM: realview: use const and __initconst for smp_operations bus: uniphier-system-bus: revive tristate prompt arm64: dts: Add missing DMA Abort interrupt to Juno bus: vexpress-config: Add missing of_node_put ARM: dts: am57xx: sbc-am57x: correct Eth PHY settings ARM: dts: am57xx: cl-som-am57x: fix CPSW EMAC pinmux ARM: dts: am57xx: sbc-am57x: fix UART3 pinmux ARM: dts: am57xx: cl-som-am57x: update SPI Flash frequency ARM: dts: am57xx: cl-som-am57x: set HOST mode for USB2 ARM: dts: am57xx: sbc-am57x: fix SB-SOM EEPROM I2C address ARM: dts: LogicPD Torpedo: Revert Duplicative Entries ARM: dts: am437x: pixcir_tangoc: use correct flags for irq types ARM: dts: am4372: fix irq type for arm twd and global timer ARM: dts: at91: sama5d4 xplained: fix phy0 IRQ type ...
| * | ARM: multi_v7_defconfig: enable DW_WATCHDOGDinh Nguyen2016-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | The watchdog timer on the SoCFPGA platform is the Synopsys Designware watchdog. Enable CONFIG_DW_WATCHDOG for the driver to get built. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | ARM: nomadik: fix up SD/MMC DT settingsLinus Walleij2016-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DTSI file for the Nomadik does not properly specify how the PL180 levelshifter is connected: the Nomadik actually needs all the five st,sig-dir-* flags set to properly control all lines out. Further this board supports full power cycling of the card, and since this variant has no hardware clock gating, it needs a ridiculously low frequency setting to keep up with the ever overflowing FIFO. The pin configuration set-up is a bit of a mystery, because of course these pins are a mix of inputs and outputs. However the reference implementation sets all pins to "output" with unspecified initial value, so let's do that here as well. Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | Merge tag 'vexpress-for-v4.5/fixes-rc2' of ↵Olof Johansson2016-02-01
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into fixes vexpress fixes for v4.5 Couple of minor fixes for vexpress platforms: 1. Add missing of_node_put in vexpress config bus 2. Add missing DMA-330 abort interrupt on Juno platforms * tag 'vexpress-for-v4.5/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: Add missing DMA Abort interrupt to Juno bus: vexpress-config: Add missing of_node_put Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | arm64: dts: Add missing DMA Abort interrupt to JunoRobin Murphy2016-02-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DMA-330 has an "irq_abort" interrupt line on which it signals faults separately from the "irq[n:0]" channel interrupts. On Juno, this is wired up to SPI 92; add it to the DT so that DMAC faults are correctly reported for the driver to reset the thing, rather than leaving it locked up and waiting to time out. CC: Liviu Dudau <liviu.dudau@arm.com> CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
| | * | bus: vexpress-config: Add missing of_node_putAmitoj Kaur Chawla2016-02-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | for_each_compatible_node performs an of_node_get on each iteration, so to break out of the loop an of_node_put is required. Found using Coccinelle. The semantic patch used for this is as follows: // <smpl> @@ expression e; local idexpression n; @@ for_each_compatible_node(n, ...) { ... when != of_node_put(n) when != e = n ( return n; + of_node_put(n); ? return ...; ) ... } // </smpl> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
| * | | Merge tag 'mvebu-fixes-4.5-1' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson2016-02-01
| |\ \ \ | | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mvebu fixes for 4.5 (part 1) - Fix dts on buffalo linksations machines (gpios and leds) - Fix dts partition node according to new binding introduced in v4.5 * tag 'mvebu-fixes-4.5-1' of git://git.infradead.org/linux-mvebu: ARM: dts: orion5x: gpio pin fixes for linkstation lswtgl ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wvl/vl ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wxl/wsxl ARM: dts: kirkwood: gpio pin fixes for linkstation ls-wvl/vl ARM: dts: kirkwood: gpio pin fixes for linkstation ls-wxl/wsxl ARM: mvebu: ix4-300d: Add compatible property to "partitions" node ARM: mvebu: kirkwood: Add compatible property to "partitions" node Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | ARM: dts: orion5x: gpio pin fixes for linkstation lswtglRoger Shimizu2016-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Here're a few gpio pin related fixes: - remove pinctrl-0 definition from pinctrl, since those pins are used in other places such as gpio-fan and regulators. - keep initial state of power led - fix for alarm pin of gpio-fan. Fixes: dc57844a736f ("ARM: dts: orion5x: add buffalo linkstation ls-wtgl") Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
| | * | ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wvl/vlRoger Shimizu2016-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GPIOs controlling the LEDs, listed below, are active high, not low: - gpio-leds: "lswvl:red:alarm" pin - gpio-leds: "lswvl:red:func" pin - gpio-leds: "lswvl:amber:info" pin - gpio-leds: "lswvl:blue:func" pin - gpio-leds: "lswvl:red:hdderr{0,1}" pin Fixes: c43379e150aa ("ARM: dts: add buffalo linkstation ls-wvl/vl") Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
| | * | ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wxl/wsxlRoger Shimizu2016-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GPIOs controlling the LEDs, listed below, are active high, not low: - gpio-leds: "lswxl:blue:power" pin - gpio-leds: "lswxl:red:func" pin - gpio-leds: "lswxl:red:hdderr{0,1}" pin Fixes: e54e4b1b622e ("ARM: dts: add buffalo linkstation ls-wxl/wsxl") Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
| | * | ARM: dts: kirkwood: gpio pin fixes for linkstation ls-wvl/vlRoger Shimizu2016-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For kirkwood, gpio pins starts from 32 are in the 2nd bank, so it should be converted to "gpio1 <pin minus 32>" in dts file. e.g. gpio 40 should be "gpio1 8" The pin/bank issue was found when discussing Debian Bug #810894 [https://bugs.debian.org/810894#47] Fixes: c43379e150aa ("ARM: dts: add buffalo linkstation ls-wvl/vl") Reported-by: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
| | * | ARM: dts: kirkwood: gpio pin fixes for linkstation ls-wxl/wsxlRoger Shimizu2016-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For kirkwood, gpio pins starts from 32 are in the 2nd bank, so it should be converted to "gpio1 <pin minus 32>" in dts file. e.g. gpio 40 should be "gpio1 8" Besides, a few other pin fixes for ls-wxl/wsxl, to match with mpp pin definition: - gpio-leds: "lswxl:blue:power" pin - gpio-leds: "lswxl:red:func" pin - gpio-leds: "lswxl:red:hdderr0" pin - gpio-leds: "lswxl:red:hdderr1" pin - gpio-fan: low/high/alarm pin The pin/bank issue was found when discussing Debian Bug #810894 [https://bugs.debian.org/810894#47] Fixes: e54e4b1b622e ("ARM: dts: add buffalo linkstation ls-wxl/wsxl") Reported-by: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
| | * | ARM: mvebu: ix4-300d: Add compatible property to "partitions" nodeGeert Uytterhoeven2016-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As of commit e488ca9f8d4f62c2 ("doc: dt: mtd: partitions: add compatible property to "partitions" node"), the "partitions" subnode of an SPI FLASH device node must have a compatible property. The partitions are no longer detected if it is not present. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
| | * | ARM: mvebu: kirkwood: Add compatible property to "partitions" nodeGeert Uytterhoeven2016-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As of commit e488ca9f8d4f62c2 ("doc: dt: mtd: partitions: add compatible property to "partitions" node"), the "partitions" subnode of an SPI FLASH device node must have a compatible property. The partitions are no longer detected if it is not present. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
| * | | Merge tag 'omap-for-v4.5/fixes-rc1' of ↵Olof Johansson2016-02-01
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps with the most intrusive stuff being read-only data assembly fixes, the other things are mostly board related: - A series of omap assembly code fixes to fix issues with rodata with ARM_KERNMEM_PERMS enabled. We had several places writing to rodata, which is bad. The fix in most cases is to load the value from data section using a pointer. Let's also enable ARM_KERNMEM_PERMS so DEBUG_RODATA gets selected by default. And while testing things, I also added few more loadable driver modules to the defconfig that I seem to need quite often. - Fix a long standing omap5 RTC mystery and enable RTC where we need to ensure the SoC msecure pin is high so we can write to the RTC registers. - Fix irq types for am437x - A series of minor dts fixes for sbc-am57x and cl-som-am57x - Fixes for torpedo dts to make WLAN behave and to remove a duplicate i2c rate entry This series also includes few minor changes that are not stricly fixes, but would be good to get in during the early -rc cycle: - Remove legacy mailbox platform data that is no longer needed - Add the pdata-quirks needed for the new pwm-omap-dmtimer so people can use it - Enable ti,mbox-send-noirq that's needed by wkup_m3 driver - Enable SPLIT and DWARF4 in omap2plus_defconfig as it makes the initramfs quite a bit smaller * tag 'omap-for-v4.5/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (23 commits) ARM: dts: am57xx: sbc-am57x: correct Eth PHY settings ARM: dts: am57xx: cl-som-am57x: fix CPSW EMAC pinmux ARM: dts: am57xx: sbc-am57x: fix UART3 pinmux ARM: dts: am57xx: cl-som-am57x: update SPI Flash frequency ARM: dts: am57xx: cl-som-am57x: set HOST mode for USB2 ARM: dts: am57xx: sbc-am57x: fix SB-SOM EEPROM I2C address ARM: dts: LogicPD Torpedo: Revert Duplicative Entries ARM: dts: am437x: pixcir_tangoc: use correct flags for irq types ARM: dts: am4372: fix irq type for arm twd and global timer ARM: dts: Fix wl12xx missing clocks that cause hangs ARM: OMAP: Add PWM dmtimer platform data quirks ARM: omap2plus_defconfig: Enable ARM_KERNMEM_PERMS and few loadable modules ARM: OMAP2+: Fix ppa_zero_params and ppa_por_params for rodata ARM: OMAP2+: Fix l2_inv_api_params for rodata ARM: OMAP2+: Fix save_secure_ram_context for rodata ARM: OMAP2+: Fix l2dis_3630 for rodata ARM: OMAP2+: Fix wait_dll_lock_timed for rodata ARM: OMAP2+: Remove legacy mailbox device instantiation ARM: dts: AM4372: Add ti,mbox-send-noirq to wkup_m3 mailbox ARM: dts: AM33xx: Add ti,mbox-send-noirq to wkup_m3 mailbox ... Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | ARM: dts: am57xx: sbc-am57x: correct Eth PHY settingsDmitry Lifshitz2016-01-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update Eth PHY settings to make it possible to run both phys at 1Gbps. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | ARM: dts: am57xx: cl-som-am57x: fix CPSW EMAC pinmuxDmitry Lifshitz2016-01-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix CPSW EMAC pinmux Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | ARM: dts: am57xx: sbc-am57x: fix UART3 pinmuxDmitry Lifshitz2016-01-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix UART3 pinmux. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | ARM: dts: am57xx: cl-som-am57x: update SPI Flash frequencyDmitry Lifshitz2016-01-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On-board SPI flash cat act at 48Mhz SPI bus frequency. Update the DT frequency property. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | ARM: dts: am57xx: cl-som-am57x: set HOST mode for USB2Dmitry Lifshitz2016-01-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Setup USB2 to act in "HOST" mode by default. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | ARM: dts: am57xx: sbc-am57x: fix SB-SOM EEPROM I2C addressDmitry Lifshitz2016-01-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix SB-SOM EEPROM I2C address Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | ARM: dts: LogicPD Torpedo: Revert Duplicative EntriesAdam Ford2016-01-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Revert commit 7cd6ca770d1b ("ARM: dts: Change I2C2 and I2C3 to 400KHz for LogicPD Torpedo DM3730 devkit") It was already done and it is just a duplicate. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | ARM: dts: am437x: pixcir_tangoc: use correct flags for irq typesGrygorii Strashko2016-01-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now IRQs for Pixcir Tangoc touchscreen are defined using IRQ_TYPE_NONE in am437x-gp-evm.dts and am43x-epos-evm.dts wich do not correspond HW. Hence, update am437x-gp-evm.dts and am43x-epos-evm.dts files and use correct flag IRQ_TYPE_EDGE_FALLING for irq types. While here, remove duplicated irq declaration for pixcir_ts@5c node in am437x-gp-evm.dts. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | ARM: dts: am4372: fix irq type for arm twd and global timerGrygorii Strashko2016-01-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As per ARM documentation PPI(0) ID27 - global timer interrupt is rising-edge sensitive. PPI(2) ID29 - twd interrupt is rising-edge sensitive. and the same is proved by GIC distributor register value GIC_DIST_CONFIG(0xC04) = 0x7DC00000. Hence, set IRQ triggering type to IRQ_TYPE_EDGE_RISING for ARM TWD and Global timers. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | ARM: dts: Fix wl12xx missing clocks that cause hangsAdam Ford2016-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The tcxo-clock-frequency binding is listed as optional, but without it the wl12xx used on the torpedo + wireless may hang. Scanning also appears broken without this patch. Signed-off-by: Adam Ford <aford173@gmail.com> Fixes: 687c27676151 ("ARM: dts: Add minimal support for LogicPD Torpedo DM3730 devkit") Cc: stable@vger.kernel.org # v4.2+ Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | Merge branch 'enable-devices' into omap-for-v4.5/fixesTony Lindgren2016-01-25
| | |\ \ \
| | | * | | ARM: OMAP: Add PWM dmtimer platform data quirksNeil Armstrong2016-01-25
| | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to set the currently platform dependent dmtimer functions pointers as platform data for the pwm-omap-dmtimer platform driver, add it to plat-omap auxdata_lookup table. Suggested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | ARM: omap2plus_defconfig: Enable ARM_KERNMEM_PERMS and few loadable modulesTony Lindgren2016-01-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With recent omap assembly fixes for CONFIG_DEBUG_RODATA, we can now use DEBUG_RODATA. Let's enable ARM_KERNMEM_PERMS so that DEBUG_RODATA gets selected by default. This way we can make sure any related issues are caught early. And while testing things on various devices, I noticed we're missing few loadable modules to make things more usable: - USB Ethernet for smsc75xx, we only have smsc97xx right now - Basic USB serial drivers for things like ftdi and pl2303 ports - Blinking leds with pca963x Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | ARM: OMAP2+: Fix ppa_zero_params and ppa_por_params for rodataTony Lindgren2016-01-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We don't want to write to .text so let's move ppa_zero_params and ppa_por_params to .data and access them via pointers. Note that I have not been able to test as we I don't have a HS omap4 to test with. The code has been changed in similar way as for omap3 though. Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Nishanth Menon <nm@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: stable@vger.kernel.org # v4.0+ Fixes: 1e6b48116a95 ("ARM: mm: allow non-text sections to be non-executable") Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | ARM: OMAP2+: Fix l2_inv_api_params for rodataTony Lindgren2016-01-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We don't want to write to .text, so let's move l2_inv_api_params to .data and access it via a pointer. Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Nishanth Menon <nm@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: stable@vger.kernel.org # v4.0+ Fixes: 1e6b48116a95 ("ARM: mm: allow non-text sections to be non-executable") Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | ARM: OMAP2+: Fix save_secure_ram_context for rodataTony Lindgren2016-01-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We don't want to write to .text and we can move save_secure_ram_context into .data as it all gets copied into SRAM anyways. Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Nishanth Menon <nm@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Tero Kristo <t-kristo@ti.com> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: stable@vger.kernel.org # v4.0+ Fixes: 1e6b48116a95 ("ARM: mm: allow non-text sections to be non-executable") Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | ARM: OMAP2+: Fix l2dis_3630 for rodataTony Lindgren2016-01-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We don't want to write to .text section. Let's move l2dis_3630 to .data and access it via a pointer. For calculating the offset, let's optimize out the add and do it in ldr/str as suggested by Nicolas Pitre <nicolas.pitre@linaro.org>. Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Nishanth Menon <nm@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Cc: stable@vger.kernel.org # v4.0+ Acked-by: Nicolas Pitre <nico@linaro.org> Cc: stable@vger.kernel.org # v4.0+ Fixes: 1e6b48116a95 ("ARM: mm: allow non-text sections to be non-executable") Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | ARM: OMAP2+: Fix wait_dll_lock_timed for rodataTony Lindgren2016-01-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We don't want to be writing to .text so it can be set rodata. Fix error "Unable to handle kernel paging request at virtual address c012396c" in wait_dll_lock_timed if CONFIG_DEBUG_RODATA is selected. As these counters are for debugging only and unused, we can just remove them. Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Nishanth Menon <nm@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: stable@vger.kernel.org # v4.0+ Fixes: 1e6b48116a95 ("ARM: mm: allow non-text sections to be non-executable") Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.2 (git 2.25.0) at 2025-08-25 23:33:01 -0400