aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* irqdomain: irq_domain_check_msi_remapEric Auger2017-01-23
| | | | | | | | | | | | | | | | | | | | | This new function checks whether all MSI irq domains implement IRQ remapping. This is useful to understand whether VFIO passthrough is safe with respect to interrupts. On ARM typically an MSI controller can sit downstream to the IOMMU without preventing VFIO passthrough. As such any assigned device can write into the MSI doorbell. In case the MSI controller implements IRQ remapping, assigned devices will not be able to trigger interrupts towards the host. On the contrary, the assignment must be emphasized as unsafe with respect to interrupts. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Tested-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Tested-by: Bharat Bhushan <bharat.bhushan@nxp.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
* genirq/msi: Set IRQ_DOMAIN_FLAG_MSI on MSI domain creationEric Auger2017-01-23
| | | | | | | | | | | Now we have a flag value indicating an IRQ domain implements MSI, let's set it on msi_create_irq_domain(). Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Tested-by: Bharat Bhushan <bharat.bhushan@nxp.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
* irqdomain: Add irq domain MSI and MSI_REMAP flagsEric Auger2017-01-23
| | | | | | | | | | | | | | | | | | | | | | We introduce two new enum values for the irq domain flag: - IRQ_DOMAIN_FLAG_MSI indicates the irq domain corresponds to an MSI domain - IRQ_DOMAIN_FLAG_MSI_REMAP indicates the irq domain has MSI remapping capabilities. Those values will be useful to check all MSI irq domains have MSI remapping support when assessing the safety of IRQ assignment to a guest. irq_domain_hierarchical_is_msi_remap() allows to check if an irq domain or any parent implements MSI remapping. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Tested-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Tested-by: Bharat Bhushan <bharat.bhushan@nxp.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
* iommu/arm-smmu-v3: Implement reserved region get/put callbacksEric Auger2017-01-23
| | | | | | | | | | | | | The get() populates the list with the MSI IOVA reserved window. At the moment an arbitray MSI IOVA window is set at 0x8000000 of size 1MB. This will allow to report those info in iommu-group sysfs. Signed-off-by: Eric Auger <eric.auger@redhat.com> Acked-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
* iommu/arm-smmu: Implement reserved region get/put callbacksEric Auger2017-01-23
| | | | | | | | | | | | | | | The get() populates the list with the MSI IOVA reserved window. At the moment an arbitray MSI IOVA window is set at 0x8000000 of size 1MB. This will allow to report those info in iommu-group sysfs. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Tested-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Tested-by: Bharat Bhushan <bharat.bhushan@nxp.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
* iommu/amd: Declare MSI and HT regions as reserved IOVA regionsEric Auger2017-01-23
| | | | | | | | | | This patch registers the MSI and HT regions as non mappable reserved regions. They will be exposed in the iommu-group sysfs. For direct-mapped regions let's also use iommu_alloc_resv_region(). Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
* iommu/vt-d: Implement reserved region get/put callbacksEric Auger2017-01-23
| | | | | | | | | | | This patch registers the [FEE0_0000h - FEF0_000h] 1MB MSI range as a reserved region and RMRR regions as direct regions. This will allow to report those reserved regions in the iommu-group sysfs. Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
* iommu: Implement reserved_regions iommu-group sysfs fileEric Auger2017-01-23
| | | | | | | | | | | | | | A new iommu-group sysfs attribute file is introduced. It contains the list of reserved regions for the iommu-group. Each reserved region is described on a separate line: - first field is the start IOVA address, - second is the end IOVA address, - third is the type. Signed-off-by: Eric Auger <eric.auger@redhat.com> Tested-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Tested-by: Bharat Bhushan <bharat.bhushan@nxp.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
* iommu: iommu_get_group_resv_regionsEric Auger2017-01-23
| | | | | | | | | | | | | Introduce iommu_get_group_resv_regions whose role consists in enumerating all devices from the group and collecting their reserved regions. The list is sorted and overlaps between regions of the same type are handled by merging the regions. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Tested-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Tested-by: Bharat Bhushan <bharat.bhushan@nxp.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
* iommu: Only map direct mapped regionsEric Auger2017-01-23
| | | | | | | | | | | As we introduced new reserved region types which do not require mapping, let's make sure we only map direct mapped regions. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Tested-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Tested-by: Bharat Bhushan <bharat.bhushan@nxp.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
* iommu: iommu_alloc_resv_regionEric Auger2017-01-23
| | | | | | | | | | | | Introduce a new helper serving the purpose to allocate a reserved region. This will be used in iommu driver implementing reserved region callbacks. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Tested-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Tested-by: Bharat Bhushan <bharat.bhushan@nxp.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
* iommu: Add a new type field in iommu_resv_regionEric Auger2017-01-23
| | | | | | | | | | | | | | | We introduce a new field to differentiate the reserved region types and specialize the apply_resv_region implementation. Legacy direct mapped regions have IOMMU_RESV_DIRECT type. We introduce 2 new reserved memory types: - IOMMU_RESV_MSI will characterize MSI regions that are mapped - IOMMU_RESV_RESERVED characterize regions that cannot by mapped. Signed-off-by: Eric Auger <eric.auger@redhat.com> Tested-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Tested-by: Bharat Bhushan <bharat.bhushan@nxp.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
* iommu: Rename iommu_dm_regions into iommu_resv_regionsEric Auger2017-01-23
| | | | | | | | | | | | | | | | | | We want to extend the callbacks used for dm regions and use them for reserved regions. Reserved regions can be - directly mapped regions - regions that cannot be iommu mapped (PCI host bridge windows, ...) - MSI regions (because they belong to another address space or because they are not translated by the IOMMU and need special handling) So let's rename the struct and also the callbacks. Signed-off-by: Eric Auger <eric.auger@redhat.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Tested-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Tested-by: Bharat Bhushan <bharat.bhushan@nxp.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
* iommu/dma: Allow MSI-only cookiesRobin Murphy2017-01-23
| | | | | | | | | | | | | | | | | | | | | | | IOMMU domain users such as VFIO face a similar problem to DMA API ops with regard to mapping MSI messages in systems where the MSI write is subject to IOMMU translation. With the relevant infrastructure now in place for managed DMA domains, it's actually really simple for other users to piggyback off that and reap the benefits without giving up their own IOVA management, and without having to reinvent their own wheel in the MSI layer. Allow such users to opt into automatic MSI remapping by dedicating a region of their IOVA space to a managed cookie, and extend the mapping routine to implement a trivial linear allocator in such cases, to avoid the needless overhead of a full-blown IOVA domain. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Tested-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Tested-by: Bharat Bhushan <bharat.bhushan@nxp.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
* Linux 4.10-rc3Linus Torvalds2017-01-08
|
* Merge tag 'usb-4.10-rc3' of ↵Linus Torvalds2017-01-08
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a bunch of USB fixes for 4.10-rc3. Yeah, it's a lot, an artifact of the holiday break I think. Lots of gadget and the usual XHCI fixups for reported issues (one day that driver will calm down...) Also included are a bunch of usb-serial driver fixes, and for good measure, a number of much-reported MUSB driver issues have finally been resolved. All of these have been in linux-next with no reported issues" * tag 'usb-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (72 commits) USB: fix problems with duplicate endpoint addresses usb: ohci-at91: use descriptor-based gpio APIs correctly usb: storage: unusual_uas: Add JMicron JMS56x to unusual device usb: hub: Move hub_port_disable() to fix warning if PM is disabled usb: musb: blackfin: add bfin_fifo_offset in bfin_ops usb: musb: fix compilation warning on unused function usb: musb: Fix trying to free already-free IRQ 4 usb: musb: dsps: implement clear_ep_rxintr() callback usb: musb: core: add clear_ep_rxintr() to musb_platform_ops USB: serial: ti_usb_3410_5052: fix NULL-deref at open USB: serial: spcp8x5: fix NULL-deref at open USB: serial: quatech2: fix sleep-while-atomic in close USB: serial: pl2303: fix NULL-deref at open USB: serial: oti6858: fix NULL-deref at open USB: serial: omninet: fix NULL-derefs at open and disconnect USB: serial: mos7840: fix misleading interrupt-URB comment USB: serial: mos7840: remove unused write URB USB: serial: mos7840: fix NULL-deref at open USB: serial: mos7720: remove obsolete port initialisation USB: serial: mos7720: fix parallel probe ...
| * USB: fix problems with duplicate endpoint addressesAlan Stern2017-01-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When checking a new device's descriptors, the USB core does not check for duplicate endpoint addresses. This can cause a problem when the sysfs files for those endpoints are created; trying to create multiple files with the same name will provoke a WARNING: WARNING: CPU: 2 PID: 865 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x8a/0xa0 sysfs: cannot create duplicate filename '/devices/platform/dummy_hcd.0/usb2/2-1/2-1:64.0/ep_05' Kernel panic - not syncing: panic_on_warn set ... CPU: 2 PID: 865 Comm: kworker/2:1 Not tainted 4.9.0-rc7+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event ffff88006bee64c8 ffffffff81f96b8a ffffffff00000001 1ffff1000d7dcc2c ffffed000d7dcc24 0000000000000001 0000000041b58ab3 ffffffff8598b510 ffffffff81f968f8 ffffffff850fee20 ffffffff85cff020 dffffc0000000000 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff81f96b8a>] dump_stack+0x292/0x398 lib/dump_stack.c:51 [<ffffffff8168c88e>] panic+0x1cb/0x3a9 kernel/panic.c:179 [<ffffffff812b80b4>] __warn+0x1c4/0x1e0 kernel/panic.c:542 [<ffffffff812b8195>] warn_slowpath_fmt+0xc5/0x110 kernel/panic.c:565 [<ffffffff819e70ca>] sysfs_warn_dup+0x8a/0xa0 fs/sysfs/dir.c:30 [<ffffffff819e7308>] sysfs_create_dir_ns+0x178/0x1d0 fs/sysfs/dir.c:59 [< inline >] create_dir lib/kobject.c:71 [<ffffffff81fa1b07>] kobject_add_internal+0x227/0xa60 lib/kobject.c:229 [< inline >] kobject_add_varg lib/kobject.c:366 [<ffffffff81fa2479>] kobject_add+0x139/0x220 lib/kobject.c:411 [<ffffffff82737a63>] device_add+0x353/0x1660 drivers/base/core.c:1088 [<ffffffff82738d8d>] device_register+0x1d/0x20 drivers/base/core.c:1206 [<ffffffff82cb77d3>] usb_create_ep_devs+0x163/0x260 drivers/usb/core/endpoint.c:195 [<ffffffff82c9f27b>] create_intf_ep_devs+0x13b/0x200 drivers/usb/core/message.c:1030 [<ffffffff82ca39d3>] usb_set_configuration+0x1083/0x18d0 drivers/usb/core/message.c:1937 [<ffffffff82cc9e2e>] generic_probe+0x6e/0xe0 drivers/usb/core/generic.c:172 [<ffffffff82caa7fa>] usb_probe_device+0xaa/0xe0 drivers/usb/core/driver.c:263 This patch prevents the problem by checking for duplicate endpoint addresses during enumeration and skipping any duplicates. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: ohci-at91: use descriptor-based gpio APIs correctlyPeter Rosin2017-01-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The gpiod_get* function family does not want the -gpio suffix. Use devm_gpiod_get_index_optional instead of devm_gpiod_get_optional. The descriptor based APIs handle active high/low automatically. The vbus-gpios are output, request enable while getting the gpio. Don't try to get any vbus-gpios for ports outside num-ports. WTF? Big sigh. Fixes: 054d4b7b577d ("usb: ohci-at91: Use descriptor-based gpio APIs") Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: storage: unusual_uas: Add JMicron JMS56x to unusual deviceOliver Neukum2017-01-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This device gives the following error on detection. xhci_hcd 0000:00:11.0: ERROR Transfer event for disabled endpoint or incorrect stream ring The same error is not seen when it is added to unusual_device list with US_FL_NO_REPORT_OPCODES passed. Signed-off-by: George Cherian <george.cherian@cavium.com> Signed-off-by: Oliver Neukum <oneukun@suse.com> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: hub: Move hub_port_disable() to fix warning if PM is disabledGeert Uytterhoeven2017-01-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | If CONFIG_PM=n: drivers/usb/core/hub.c:107: warning: ‘hub_usb3_port_prepare_disable’ declared inline after being called drivers/usb/core/hub.c:107: warning: previous declaration of ‘hub_usb3_port_prepare_disable’ was here To fix this, move hub_port_disable() after hub_usb3_port_prepare_disable(), and adjust forward declarations. Fixes: 37be66767e3cae4f ("usb: hub: Fix auto-remount of safely removed or ejected USB-3 devices") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: musb: blackfin: add bfin_fifo_offset in bfin_opsJérémy Lefaure2017-01-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function bfin_fifo_offset is defined but not used: drivers/usb/musb/blackfin.c:36:12: warning: ‘bfin_fifo_offset’ defined but not used [-Wunused-function] static u32 bfin_fifo_offset(u8 epnum) ^~~~~~~~~~~~~~~~ Adding bfin_fifo_offset to bfin_ops fixes this warning and allows musb core to call this function instead of default_fifo_offset. Fixes: cc92f6818f6e ("usb: musb: Populate new IO functions for blackfin") Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: musb: fix compilation warning on unused functionJérémy Lefaure2017-01-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function musb_run_resume_work is called only when CONFIG_PM is enabled. So this function should not be defined when CONFIG_PM is disabled. Otherwise the compiler issues a warning: drivers/usb/musb/musb_core.c:2057:12: error: ‘musb_run_resume_work’ defined but not used [-Werror=unused-function] static int musb_run_resume_work(struct musb *musb) ^~~~~~~~~~~~~~~~~~~~ Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: musb: Fix trying to free already-free IRQ 4Tony Lindgren2017-01-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When unloading omap2430, we can get the following splat: WARNING: CPU: 1 PID: 295 at kernel/irq/manage.c:1478 __free_irq+0xa8/0x2c8 Trying to free already-free IRQ 4 ... [<c01a8b78>] (free_irq) from [<bf0aea84>] (musbhs_dma_controller_destroy+0x28/0xb0 [musb_hdrc]) [<bf0aea84>] (musbhs_dma_controller_destroy [musb_hdrc]) from [<bf09f88c>] (musb_remove+0xf0/0x12c [musb_hdrc]) [<bf09f88c>] (musb_remove [musb_hdrc]) from [<c056a384>] (platform_drv_remove+0x24/0x3c) ... This is because the irq number in use is 260 nowadays, and the dma controller is using u8 instead of int. Fixes: 6995eb68aab7 ("USB: musb: enable low level DMA operation for Blackfin") Signed-off-by: Tony Lindgren <tony@atomide.com> [b-liu@ti.com: added Fixes tag] Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: musb: dsps: implement clear_ep_rxintr() callbackBin Liu2017-01-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During dma teardown for dequque urb, if musb load is high, musb might generate bogus rx ep interrupt even when the rx fifo is flushed. In such case any of the follow log messages could happen. musb_host_rx 1853: BOGUS RX2 ready, csr 0000, count 0 musb_host_rx 1936: RX3 dma busy, csr 2020 As mentioned in the current inline comment, clearing ep interrupt in the teardown path avoids the bogus interrupt, so implement clear_ep_rxintr() callback. This bug seems to be existing since the initial driver for musb support, but I only validated the fix back to v4.1, so only cc stable for v4.1+. cc: stable@vger.kernel.org # 4.1+ Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: musb: core: add clear_ep_rxintr() to musb_platform_opsBin Liu2017-01-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During dma teardown for dequque urb, if musb load is high, musb might generate bogus rx ep interrupt even when the rx fifo is flushed. In such case any of the follow log messages could happen. musb_host_rx 1853: BOGUS RX2 ready, csr 0000, count 0 musb_host_rx 1936: RX3 dma busy, csr 2020 As mentioned in the current inline comment, clearing ep interrupt in the teardown path avoids the bogus interrupt. Clearing ep interrupt is platform dependent, so this patch adds a platform callback to allow glue driver to clear the ep interrupt. This bug seems to be existing since the initial driver for musb support, but I only validated the fix back to v4.1, so only cc stable for v4.1+. cc: stable@vger.kernel.org # 4.1+ Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Merge tag 'usb-serial-4.10-rc3' of ↵Greg Kroah-Hartman2017-01-05
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.10-rc3 These fixes address a number of long-standing issues in various USB-serial drivers which would lead to crashes should a malicious device lack the expected endpoints. Included are also a few related fixes, and a couple of unrelated ones that were found during my survey (e.g. a memleak and a sleep-while-atomic). A compiler warning revealed an error-handling issue in the new f81534 driver which is also fixed. Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: ti_usb_3410_5052: fix NULL-deref at openJohan Hovold2017-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix NULL-pointer dereference in open() should a malicious device lack the expected endpoints: Unable to handle kernel NULL pointer dereference at virtual address 00000030 .. [<bf06a6b0>] (ti_open [ti_usb_3410_5052]) from [<bf02e118>] (serial_port_activate+0x68/0x98 [usbserial]) Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: spcp8x5: fix NULL-deref at openJohan Hovold2017-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix NULL-pointer dereference in open() should the device lack the expected endpoints: Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... PC is at spcp8x5_open+0x30/0xd0 [spcp8x5] Fixes: 619a6f1d1423 ("USB: add usb-serial spcp8x5 driver") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: quatech2: fix sleep-while-atomic in closeJohan Hovold2017-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The write URB was being killed using the synchronous interface while holding a spin lock in close(). Simply drop the lock and busy-flag update, something which would have been taken care of by the completion handler if the URB was in flight. Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: pl2303: fix NULL-deref at openJohan Hovold2017-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix NULL-pointer dereference in open() should a type-0 or type-1 device lack the expected endpoints: Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... PC is at pl2303_open+0x38/0xec [pl2303] Note that a missing interrupt-in endpoint would have caused open() to fail. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: oti6858: fix NULL-deref at openJohan Hovold2017-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix NULL-pointer dereference in open() should the device lack the expected endpoints: Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... PC is at oti6858_open+0x30/0x1d0 [oti6858] Note that a missing interrupt-in endpoint would have caused open() to fail. Fixes: 49cdee0ed0fc ("USB: oti6858 usb-serial driver (in Nokia CA-42 cable)") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: omninet: fix NULL-derefs at open and disconnectJohan Hovold2017-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix NULL-pointer dereferences at open() and disconnect() should the device lack the expected bulk-out endpoints: Unable to handle kernel NULL pointer dereference at virtual address 000000b4 ... [c0170ff0>] (__lock_acquire) from [<c0172f00>] (lock_acquire+0x108/0x264) [<c0172f00>] (lock_acquire) from [<c06a5090>] (_raw_spin_lock_irqsave+0x58/0x6c) [<c06a5090>] (_raw_spin_lock_irqsave) from [<c0470684>] (tty_port_tty_set+0x28/0xa4) [<c0470684>] (tty_port_tty_set) from [<bf08d384>] (omninet_open+0x30/0x40 [omninet]) [<bf08d384>] (omninet_open [omninet]) from [<bf07c118>] (serial_port_activate+0x68/0x98 [usbserial]) Unable to handle kernel NULL pointer dereference at virtual address 00000234 ... [<bf01f418>] (omninet_disconnect [omninet]) from [<bf0016c0>] (usb_serial_disconnect+0xe4/0x100 [usbserial]) Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: mos7840: fix misleading interrupt-URB commentJohan Hovold2017-01-04
| | | | | | | | | | | | | | | | | | | | | | | | The interrupt URB is killed at final port close since commit 0de9a7024e7a ("USB: overhaul of mos7840 driver"). Fixes: 0de9a7024e7a ("USB: overhaul of mos7840 driver") Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: mos7840: remove unused write URBJohan Hovold2017-01-04
| | | | | | | | | | | | | | | | | | Remove code to manage a write URB that was never allocated. Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: mos7840: fix NULL-deref at openJohan Hovold2017-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix NULL-pointer dereference in open() should the device lack the expected endpoints: Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... PC is at mos7840_open+0x88/0x8dc [mos7840] Note that we continue to treat the interrupt-in endpoint as optional for now. Fixes: 3f5429746d91 ("USB: Moschip 7840 USB-Serial Driver") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: mos7720: remove obsolete port initialisationJohan Hovold2017-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit b69578df7e98 ("USB: usbserial: mos7720: add support for parallel port on moschip 7715"), the interrupt urb is no longer submitted at first port open and the endpoint-address initialisation at port-probe is no longer used. Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: mos7720: fix parallel probeJohan Hovold2017-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A static usb-serial-driver structure that is used to initialise the interrupt URB was modified during probe depending on the currently probed device type, something which could break a parallel probe of a device of a different type. Fix this up by overriding the default completion callback for MCS7715 devices in attach() instead. We may want to use two usb-serial driver instances for the two types later. Fixes: fb088e335d78 ("USB: serial: add support for serial port on the moschip 7715") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: mos7720: fix parport use-after-free on probe errorsJohan Hovold2017-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do not submit the interrupt URB until after the parport has been successfully registered to avoid another use-after-free in the completion handler when accessing the freed parport private data in case of a racing completion. Fixes: b69578df7e98 ("USB: usbserial: mos7720: add support for parallel port on moschip 7715") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: mos7720: fix use-after-free on probe errorsJohan Hovold2017-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The interrupt URB was submitted on probe but never stopped on probe errors. This can lead to use-after-free issues in the completion handler when accessing the freed usb-serial struct: Unable to handle kernel paging request at virtual address 6b6b6be7 ... [<bf052e70>] (mos7715_interrupt_callback [mos7720]) from [<c052a894>] (__usb_hcd_giveback_urb+0x80/0x140) [<c052a894>] (__usb_hcd_giveback_urb) from [<c052a9a4>] (usb_hcd_giveback_urb+0x50/0x138) [<c052a9a4>] (usb_hcd_giveback_urb) from [<c0550684>] (musb_giveback+0xc8/0x1cc) Fixes: b69578df7e98 ("USB: usbserial: mos7720: add support for parallel port on moschip 7715") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: mos7720: fix NULL-deref at openJohan Hovold2017-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix NULL-pointer dereference at port open if a device lacks the expected bulk in and out endpoints. Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... [<bf071c20>] (mos7720_open [mos7720]) from [<bf0490e0>] (serial_port_activate+0x68/0x98 [usbserial]) [<bf0490e0>] (serial_port_activate [usbserial]) from [<c0470ca4>] (tty_port_open+0x9c/0xe8) [<c0470ca4>] (tty_port_open) from [<bf049d98>] (serial_open+0x48/0x6c [usbserial]) [<bf049d98>] (serial_open [usbserial]) from [<c0469178>] (tty_open+0xcc/0x5cc) Fixes: 0f64478cbc7a ("USB: add USB serial mos7720 driver") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: kobil_sct: fix NULL-deref in writeJohan Hovold2017-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix NULL-pointer dereference in write() should the device lack the expected interrupt-out endpoint: Unable to handle kernel NULL pointer dereference at virtual address 00000054 ... PC is at kobil_write+0x144/0x2a0 [kobil_sct] Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: keyspan_pda: verify endpoints at probeJohan Hovold2017-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Check for the expected endpoints in attach() and fail loudly if not present. Note that failing to do this appears to be benign since da280e348866 ("USB: keyspan_pda: clean up write-urb busy handling") which prevents a NULL-pointer dereference in write() by never marking a non-existent write-urb as free. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> # < v3.3 Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: iuu_phoenix: fix NULL-deref at openJohan Hovold2017-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix NULL-pointer dereference at open should the device lack a bulk-in or bulk-out endpoint: Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... PC is at iuu_open+0x78/0x59c [iuu_phoenix] Fixes: 07c3b1a10016 ("USB: remove broken usb-serial num_endpoints check") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: io_ti: bind to interface after fw downloadJohan Hovold2017-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bind to the interface, but do not register any ports, after having downloaded the firmware. The device will still disconnect and re-enumerate, but this way we avoid an error messages from being logged as part of the process: io_ti: probe of 1-1.3:1.0 failed with error -5 Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: io_ti: fix I/O after disconnectJohan Hovold2017-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cancel the heartbeat work on driver unbind in order to avoid I/O after disconnect in case the port is held open. Note that the cancel in release() is still needed to stop the heartbeat after late probe errors. Fixes: 26c78daade0f ("USB: io_ti: Add heartbeat to keep idle EP/416 ports from disconnecting") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: io_ti: fix another NULL-deref at openJohan Hovold2017-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case a device is left in "boot-mode" we must not register any port devices in order to avoid a NULL-pointer dereference on open due to missing endpoints. This could be used by a malicious device to trigger an OOPS: Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... [<bf0caa84>] (edge_open [io_ti]) from [<bf0b0118>] (serial_port_activate+0x68/0x98 [usbserial]) [<bf0b0118>] (serial_port_activate [usbserial]) from [<c0470ca4>] (tty_port_open+0x9c/0xe8) [<c0470ca4>] (tty_port_open) from [<bf0b0da0>] (serial_open+0x48/0x6c [usbserial]) [<bf0b0da0>] (serial_open [usbserial]) from [<c0469178>] (tty_open+0xcc/0x5cc) Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: io_ti: fix NULL-deref at openJohan Hovold2017-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix NULL-pointer dereference when clearing halt at open should a malicious device lack the expected endpoints when in download mode. Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... [<bf011ed8>] (edge_open [io_ti]) from [<bf000118>] (serial_port_activate+0x68/0x98 [usbserial]) [<bf000118>] (serial_port_activate [usbserial]) from [<c0470ca4>] (tty_port_open+0x9c/0xe8) [<c0470ca4>] (tty_port_open) from [<bf000da0>] (serial_open+0x48/0x6c [usbserial]) [<bf000da0>] (serial_open [usbserial]) from [<c0469178>] (tty_open+0xcc/0x5cc) Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: io_edgeport: fix NULL-deref at openJohan Hovold2017-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix NULL-pointer dereference when initialising URBs at open should a non-EPIC device lack a bulk-in or interrupt-in endpoint. Unable to handle kernel NULL pointer dereference at virtual address 00000028 ... PC is at edge_open+0x24c/0x3e8 [io_edgeport] Note that the EPIC-device probe path has the required sanity checks so this makes those checks partially redundant. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: garmin_gps: fix memory leak on failed URB submitJohan Hovold2017-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure to free the URB transfer buffer in case submission fails (e.g. due to a disconnect). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: cyberjack: fix NULL-deref at openJohan Hovold2017-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix NULL-pointer dereference when clearing halt at open should the device lack a bulk-out endpoint. Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... PC is at cyberjack_open+0x40/0x9c [cyberjack] Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
generated by cgit v1.2.2 (git 2.25.0) at 2025-08-26 03:29:59 -0400