aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* udp: perform source validation for mcast early demuxPaolo Abeni2017-09-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The UDP early demux can leverate the rx dst cache even for multicast unconnected sockets. In such scenario the ipv4 source address is validated only on the first packet in the given flow. After that, when we fetch the dst entry from the socket rx cache, we stop enforcing the rp_filter and we even start accepting any kind of martian addresses. Disabling the dst cache for unconnected multicast socket will cause large performace regression, nearly reducing by half the max ingress tput. Instead we factor out a route helper to completely validate an skb source address for multicast packets and we call it from the UDP early demux for mcast packets landing on unconnected sockets, after successful fetching the related cached dst entry. This still gives a measurable, but limited performance regression: rp_filter = 0 rp_filter = 1 edmux disabled: 1182 Kpps 1127 Kpps edmux before: 2238 Kpps 2238 Kpps edmux after: 2037 Kpps 2019 Kpps The above figures are on top of current net tree. Applying the net-next commit 6e617de84e87 ("net: avoid a full fib lookup when rp_filter is disabled.") the delta with rp_filter == 0 will decrease even more. Fixes: 421b3885bf6d ("udp: ipv4: Add udp early demux") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* IPv4: early demux can return an error codePaolo Abeni2017-09-30
| | | | | | | | | | | | Currently no error is emitted, but this infrastructure will used by the next patch to allow source address validation for mcast sockets. Since early demux can do a route lookup and an ipv4 route lookup can return an error code this is consistent with the current ipv4 route infrastructure. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ip6_tunnel: update mtu properly for ARPHRD_ETHER tunnel device in tx pathXin Long2017-09-30
| | | | | | | | | Now when updating mtu in tx path, it doesn't consider ARPHRD_ETHER tunnel device, like ip6gre_tap tunnel, for which it should also subtract ether header to get the correct mtu. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ip6_gre: ip6gre_tap device should keep dstXin Long2017-09-30
| | | | | | | | | | The patch 'ip_gre: ipgre_tap device should keep dst' fixed a issue that ipgre_tap mtu couldn't be updated in tx path. The same fix is needed for ip6gre_tap as well. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ip_gre: ipgre_tap device should keep dstXin Long2017-09-30
| | | | | | | | | | | | | | | | Without keeping dst, the tunnel will not update any mtu/pmtu info, since it does not have a dst on the skb. Reproducer: client(ipgre_tap1 - eth1) <-----> (eth1 - ipgre_tap1)server After reducing eth1's mtu on client, then perforamnce became 0. This patch is to netif_keep_dst in gre_tap_init, as ipgre does. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netlink: do not proceed if dump's start() errsJason A. Donenfeld2017-09-30
| | | | | | | | | | | | | | | | | | | Drivers that use the start method for netlink dumping rely on dumpit not being called if start fails. For example, ila_xlat.c allocates memory and assigns it to cb->args[0] in its start() function. It might fail to do that and return -ENOMEM instead. However, even when returning an error, dumpit will be called, which, in the example above, quickly dereferences the memory in cb->args[0], which will OOPS the kernel. This is but one example of how this goes wrong. Since start() has always been a function with an int return type, it therefore makes sense to use it properly, rather than ignoring it. This patch thus returns early and does not call dumpit() when start() fails. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'mlx5-fixes-2017-09-28' of ↵David S. Miller2017-09-29
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-fixes-2017-09-28 Misc. fixes for mlx5 drivers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * net/mlx5: Fix wrong indentation in enable SRIOV codeOr Gerlitz2017-09-28
| | | | | | | | | | | | | | | | | | | | | | | | | | Smatch is screaming: drivers/net/ethernet/mellanox/mlx5/core/sriov.c:112 mlx5_device_enable_sriov() warn: inconsistent indenting fix that. Fixes: 7ecf6d8ff154 ('IB/mlx5: Restore IB guid/policy for virtual functions') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5: Fix static checker warning on steering tracepoints codeMatan Barak2017-09-28
| | | | | | | | | | | | | | | | | | | | | | | | Fix this sparse complaint: drivers/net/ethernet/mellanox/mlx5/core/./diag/fs_tracepoint.h:172:1: warning: odd constant _Bool cast (ffffffffffffffff becomes 1) Fixes: d9fea79171ee ('net/mlx5: Add tracepoints') Signed-off-by: Matan Barak <matanb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5e: Fix calculated checksum offloads countersGal Pressman2017-09-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of calculating the offloads counters, count them explicitly. The calculations done for these counters would result in bugs in some cases, for example: When running TCP traffic over a VXLAN tunnel with TSO enabled the following counters would increase: tx_csum_partial: 1,333,284 tx_csum_partial_inner: 29,286 tx4_csum_partial_inner: 384 tx7_csum_partial_inner: 8 tx9_csum_partial_inner: 34 tx10_csum_partial_inner: 26,807 tx11_csum_partial_inner: 287 tx12_csum_partial_inner: 27 tx16_csum_partial_inner: 6 tx25_csum_partial_inner: 1,733 Seems like tx_csum_partial increased out of nowhere. The issue is in the following calculation in mlx5e_update_sw_counters: s->tx_csum_partial = s->tx_packets - tx_offload_none - s->tx_csum_partial_inner; While tx_packets increases by the number of GSO segments for each SKB, tx_csum_partial_inner will only increase by one, resulting in wrong tx_csum_partial counter. Fixes: bfe6d8d1d433 ("net/mlx5e: Reorganize ethtool statistics") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5e: Don't add/remove 802.1ad rules when changing 802.1Q VLAN filterGal Pressman2017-09-28
| | | | | | | | | | | | | | | | Toggling of C-tag VLAN filter should not affect the "any S-tag" steering rule. Fixes: 8a271746a264 ("net/mlx5e: Receive s-tagged packets in promiscuous mode") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5e: Print netdev features correctly in error messageGal Pressman2017-09-28
| | | | | | | | | | | | | | | | Use the correct formatting for netdev features. Fixes: 0e405443e803 ("net/mlx5e: Improve set features ndo resiliency") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5e: Check encap entry state when offloading tunneled flowsVlad Buslov2017-09-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Encap entries cached by the driver could be invalidated due to tunnel destination neighbour state changes. When attempting to offload a flow that uses a cached encap entry, we must check the entry validity and defer the offloading if the entry exists but not valid. When EAGAIN is returned, the flow offloading to hardware takes place by the neigh update code when the tunnel destination neighbour becomes connected. Fixes: 232c001398ae ("net/mlx5e: Add support to neighbour update flow") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5e: Disallow TC offloading of unsupported match/action combinationsOr Gerlitz2017-09-28
| | | | | | | | | | | | | | | | | | | | | | | | | | When offloading header re-write, the HW may need to adjust checksums along the packet. For IP traffic, and a case where we are asked to modify fields in the IP header, current HW supports that only for TCP and UDP. Enforce it, in this case fail the offloading attempt for non TCP/UDP packets. Fixes: d7e75a325cb2 ('net/mlx5e: Add offloading of E-Switch TC pedit (header re-write) actions') Fixes: 2f4fe4cab073 ('net/mlx5e: Add offloading of NIC TC pedit (header re-write) actions') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5e: Fix erroneous freeing of encap header bufferPaul Blakey2017-09-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In case the neighbour for the tunnel destination isn't valid, we send a neighbour update request but we free the encap header buffer. This is wrong, because we still need it for allocating a HW encap entry once the neighbour is available. Fix that by skipping freeing it if we wait for neighbour. Fixes: 232c001398ae ('net/mlx5e: Add support to neighbour update flow') Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5: Check device capability for maximum flow countersRaed Salem2017-09-28
| | | | | | | | | | | | | | | | | | | | Added check for the maximal number of flow counters attached to rule (FTE). Fixes: bd5251dbf156b ('net/mlx5_core: Introduce flow steering destination of type counter') Signed-off-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5: Fix FPGA capability locationInbar Karmy2017-09-28
| | | | | | | | | | | | | | | | | | | | Currently, FPGA capability is located in (mdev)->caps.hca_cur, change the location to be (mdev)->caps.fpga, since hca_cur is reserved for HCA device capabilities. Fixes: e29341fb3a5b ("net/mlx5: FPGA, Add basic support for Innova") Signed-off-by: Inbar Karmy <inbark@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * net/mlx5e: IPoIB, Fix access to invalid memory addressRoi Dayan2017-09-28
| | | | | | | | | | | | | | | | | | | | | | | | | | When cleaning rdma netdevice we need to save the mdev pointer because priv is released when we release netdev. This bug was found using the kernel address sanitizer (KASAN). use-after-free in mlx5_rdma_netdev_free+0xe3/0x100 [mlx5_core] Fixes: 48935bbb7ae8 ("net/mlx5e: IPoIB, Add netdevice profile skeleton") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
* | net: Set sk_prot_creator when cloning sockets to the right protoChristoph Paasch2017-09-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sk->sk_prot and sk->sk_prot_creator can differ when the app uses IPV6_ADDRFORM (transforming an IPv6-socket to an IPv4-one). Which is why sk_prot_creator is there to make sure that sk_prot_free() does the kmem_cache_free() on the right kmem_cache slab. Now, if such a socket gets transformed back to a listening socket (using connect() with AF_UNSPEC) we will allocate an IPv4 tcp_sock through sk_clone_lock() when a new connection comes in. But sk_prot_creator will still point to the IPv6 kmem_cache (as everything got copied in sk_clone_lock()). When freeing, we will thus put this memory back into the IPv6 kmem_cache although it was allocated in the IPv4 cache. I have seen memory corruption happening because of this. With slub-debugging and MEMCG_KMEM enabled this gives the warning "cache_from_obj: Wrong slab cache. TCPv6 but object is from TCP" A C-program to trigger this: void main(void) { int fd = socket(AF_INET6, SOCK_STREAM, IPPROTO_TCP); int new_fd, newest_fd, client_fd; struct sockaddr_in6 bind_addr; struct sockaddr_in bind_addr4, client_addr1, client_addr2; struct sockaddr unsp; int val; memset(&bind_addr, 0, sizeof(bind_addr)); bind_addr.sin6_family = AF_INET6; bind_addr.sin6_port = ntohs(42424); memset(&client_addr1, 0, sizeof(client_addr1)); client_addr1.sin_family = AF_INET; client_addr1.sin_port = ntohs(42424); client_addr1.sin_addr.s_addr = inet_addr("127.0.0.1"); memset(&client_addr2, 0, sizeof(client_addr2)); client_addr2.sin_family = AF_INET; client_addr2.sin_port = ntohs(42421); client_addr2.sin_addr.s_addr = inet_addr("127.0.0.1"); memset(&unsp, 0, sizeof(unsp)); unsp.sa_family = AF_UNSPEC; bind(fd, (struct sockaddr *)&bind_addr, sizeof(bind_addr)); listen(fd, 5); client_fd = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); connect(client_fd, (struct sockaddr *)&client_addr1, sizeof(client_addr1)); new_fd = accept(fd, NULL, NULL); close(fd); val = AF_INET; setsockopt(new_fd, SOL_IPV6, IPV6_ADDRFORM, &val, sizeof(val)); connect(new_fd, &unsp, sizeof(unsp)); memset(&bind_addr4, 0, sizeof(bind_addr4)); bind_addr4.sin_family = AF_INET; bind_addr4.sin_port = ntohs(42421); bind(new_fd, (struct sockaddr *)&bind_addr4, sizeof(bind_addr4)); listen(new_fd, 5); client_fd = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); connect(client_fd, (struct sockaddr *)&client_addr2, sizeof(client_addr2)); newest_fd = accept(new_fd, NULL, NULL); close(new_fd); close(client_fd); close(new_fd); } As far as I can see, this bug has been there since the beginning of the git-days. Signed-off-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: mv88e6xxx: lock mutex when freeing IRQsVivien Didelot2017-09-28
| | | | | | | | | | | | | | | | | | | | | | mv88e6xxx_g2_irq_free locks the registers mutex, but not mv88e6xxx_g1_irq_free, which results in a stack trace from assert_reg_lock when unloading the mv88e6xxx module. Fix this. Fixes: 3460a5770ce9 ("net: dsa: mv88e6xxx: Mask g1 interrupts and free interrupt") Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | packet: only test po->has_vnet_hdr once in packet_sndWillem de Bruijn2017-09-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Packet socket option po->has_vnet_hdr can be updated concurrently with other operations if no ring is attached. Do not test the option twice in packet_snd, as the value may change in between calls. A race on setsockopt disable may cause a packet > mtu to be sent without having GSO options set. Fixes: bfd5f4a3d605 ("packet: Add GSO/csum offload support.") Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | packet: in packet_do_bind, test fanout with bind_lock heldWillem de Bruijn2017-09-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Once a socket has po->fanout set, it remains a member of the group until it is destroyed. The prot_hook must be constant and identical across sockets in the group. If fanout_add races with packet_do_bind between the test of po->fanout and taking the lock, the bind call may make type or dev inconsistent with that of the fanout group. Hold po->bind_lock when testing po->fanout to avoid this race. I had to introduce artificial delay (local_bh_enable) to actually observe the race. Fixes: dc99f600698d ("packet: Add fanout support.") Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: stmmac: dwmac4: Re-enable MAC Rx before powering downEd Blake2017-09-28
| | | | | | | | | | | | | | | | | | | | | | Re-enable the MAC receiver by setting CONFIG_RE before powering down, as instructed in section 6.3.5.1 of [1]. Without this the MAC fails to receive WoL packets and never wakes up. [1] DWC Ethernet QoS Databook 4.10a October 2014 Signed-off-by: Ed Blake <ed.blake@sondrel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: stmmac: dwc-qos: Add suspend / resume supportEd Blake2017-09-28
| | | | | | | | | | | | | | Add hook to stmmac_pltfr_pm_ops for suspend / resume handling. Signed-off-by: Ed Blake <ed.blake@sondrel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: Fix network device registration orderFlorian Fainelli2017-09-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We cannot be registering the network device first, then setting its carrier off and finally connecting it to a PHY, doing that leaves a window during which the carrier is at best inconsistent, and at worse the device is not usable without a down/up sequence since the network device is visible to user space with possibly no PHY device attached. Re-order steps so that they make logical sense. This fixes some devices where the port was not usable after e.g: an unbind then bind of the driver. Fixes: 0071f56e46da ("dsa: Register netdev before phy") Fixes: 91da11f870f0 ("net: Distributed Switch Architecture protocol support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: mv88e6xxx: Allow dsa and cpu ports in multiple vlansAndrew Lunn2017-09-28
| | | | | | | | | | | | | | | | | | | | | | Ports with the same VLAN must all be in the same bridge. However the CPU and DSA ports need to be in multiple VLANs spread over multiple bridges. So exclude them when performing this test. Fixes: b2f81d304cee ("net: dsa: add CPU and DSA ports as VLAN members") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | inetpeer: fix RCU lookup() againEric Dumazet2017-09-28
| | | | | | | | | | | | | | | | | | | | My prior fix was not complete, as we were dereferencing a pointer three times per node, not twice as I initially thought. Fixes: 4cc5b44b29a9 ("inetpeer: fix RCU lookup()") Fixes: b145425f269a ("inetpeer: remove AVL implementation in favor of RB tree") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'mvpp2-various-fixes'David S. Miller2017-09-28
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Antoine Tenart says: ==================== net: mvpp2: various fixes This series contains 3 fixes for the Marvell PPv2 driver. Since v1: - Removed one patch about dma masks as it would need a better fix. - Added one fix about the MAC Tx clock source selection. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: mvpp2: do not select the internal source clockAntoine Tenart2017-09-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch stops the internal MAC Tx clock from being enabled as the internal clock isn't used. The definition used for the bit controlling this behaviour is renamed as well as it was wrongly named (bit 4 of GMAC_CTRL_2_REG). Fixes: 3919357fb0bb ("net: mvpp2: initialize the GMAC when using a port") Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: mvpp2: fix port list indexingYan Markman2017-09-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The private port_list array has a list of pointers to mvpp2_port instances. This list is allocated given the number of ports enabled in the device tree, but the pointers are set using the port-id property. If on a single port is enabled, the port_list array will be of size 1, but when registering the port, if its id is not 0 the driver will crash. Other crashes were encountered in various situations. This fixes the issue by using an index not equal to the value of the port-id property. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Yan Markman <ymarkman@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: mvpp2: fix parsing fragmentation detectionStefan Chulski2017-09-28
|/ / | | | | | | | | | | | | | | | | | | | | | | | | Parsing fragmentation detection failed due to wrong configured parser TCAM entry's. Some traffic was marked as fragmented in RX descriptor, even it wasn't IP fragmented. The hardware also failed to calculate checksums which lead to use software checksum and caused performance degradation. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Stefan Chulski <stefanc@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* / tun: bail out from tun_get_user() if the skb is emptyAlexander Potapenko2017-09-28
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | KMSAN (https://github.com/google/kmsan) reported accessing uninitialized skb->data[0] in the case the skb is empty (i.e. skb->len is 0): ================================================ BUG: KMSAN: use of uninitialized memory in tun_get_user+0x19ba/0x3770 CPU: 0 PID: 3051 Comm: probe Not tainted 4.13.0+ #3140 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: ... __msan_warning_32+0x66/0xb0 mm/kmsan/kmsan_instr.c:477 tun_get_user+0x19ba/0x3770 drivers/net/tun.c:1301 tun_chr_write_iter+0x19f/0x300 drivers/net/tun.c:1365 call_write_iter ./include/linux/fs.h:1743 new_sync_write fs/read_write.c:457 __vfs_write+0x6c3/0x7f0 fs/read_write.c:470 vfs_write+0x3e4/0x770 fs/read_write.c:518 SYSC_write+0x12f/0x2b0 fs/read_write.c:565 SyS_write+0x55/0x80 fs/read_write.c:557 do_syscall_64+0x242/0x330 arch/x86/entry/common.c:284 entry_SYSCALL64_slow_path+0x25/0x25 arch/x86/entry/entry_64.S:245 ... origin: ... kmsan_poison_shadow+0x6e/0xc0 mm/kmsan/kmsan.c:211 slab_alloc_node mm/slub.c:2732 __kmalloc_node_track_caller+0x351/0x370 mm/slub.c:4351 __kmalloc_reserve net/core/skbuff.c:138 __alloc_skb+0x26a/0x810 net/core/skbuff.c:231 alloc_skb ./include/linux/skbuff.h:903 alloc_skb_with_frags+0x1d7/0xc80 net/core/skbuff.c:4756 sock_alloc_send_pskb+0xabf/0xfe0 net/core/sock.c:2037 tun_alloc_skb drivers/net/tun.c:1144 tun_get_user+0x9a8/0x3770 drivers/net/tun.c:1274 tun_chr_write_iter+0x19f/0x300 drivers/net/tun.c:1365 call_write_iter ./include/linux/fs.h:1743 new_sync_write fs/read_write.c:457 __vfs_write+0x6c3/0x7f0 fs/read_write.c:470 vfs_write+0x3e4/0x770 fs/read_write.c:518 SYSC_write+0x12f/0x2b0 fs/read_write.c:565 SyS_write+0x55/0x80 fs/read_write.c:557 do_syscall_64+0x242/0x330 arch/x86/entry/common.c:284 return_from_SYSCALL_64+0x0/0x6a arch/x86/entry/entry_64.S:245 ================================================ Make sure tun_get_user() doesn't touch skb->data[0] unless there is actual data. C reproducer below: ========================== // autogenerated by syzkaller (http://github.com/google/syzkaller) #define _GNU_SOURCE #include <fcntl.h> #include <linux/if_tun.h> #include <netinet/ip.h> #include <net/if.h> #include <string.h> #include <sys/ioctl.h> int main() { int sock = socket(PF_INET, SOCK_STREAM, IPPROTO_IP); int tun_fd = open("/dev/net/tun", O_RDWR); struct ifreq req; memset(&req, 0, sizeof(struct ifreq)); strcpy((char*)&req.ifr_name, "gre0"); req.ifr_flags = IFF_UP | IFF_MULTICAST; ioctl(tun_fd, TUNSETIFF, &req); ioctl(sock, SIOCSIFFLAGS, "gre0"); write(tun_fd, "hi", 0); return 0; } ========================== Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: Fix a big endian bug in sctp_diag_dump()Dan Carpenter2017-09-27
| | | | | | | | | | | | | The sctp_for_each_transport() function takes an pointer to int. The cb->args[] array holds longs so it's only using the high 32 bits. It works on little endian system but will break on big endian 64 bit machines. Fixes: d25adbeb0cdb ("sctp: fix an use-after-free issue in sctp_sock_dump") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'wireless-drivers-for-davem-2017-09-25' of ↵David S. Miller2017-09-26
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.14 Quite a lot of fixes this time. Most notable is the brcmfmac fix for a CVE issue. iwlwifi * a couple of bugzilla bugs related to multicast handling * two fixes for WoWLAN bugs that were causing queue hangs and re-initialization problems * two fixes for potential uninitialized variable use reported by Dan Carpenter in relation to a recently introduced patch * a fix for buffer reordering in the newly supported 9000 device family * fix a race when starting aggregation * small fix for a recent patch to wake mac80211 queues * send non-bufferable management frames in the generic queue so they are not sent on queues that are under power-save ath10k * fix a PCI PM related gcc warning brcmfmac * CVE-2017-0786: add length check scan results from firmware * respect passive scan requests from user space qtnfmac * fix race in tx path when using multiple interfaces * cancel ongoing scan when removing the wireless interface ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge ath-current from ath.gitKalle Valo2017-09-25
| |\ | | | | | | | | | | | | | | | | | | | | | ath.git fixes for 4.14. Major changes: ath10k * fix a PCI PM related gcc warning
| | * ath10k: mark PM functions as __maybe_unusedArnd Bergmann2017-09-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When CONFIG_PM_SLEEP is disabled, we get a compile-time warning: drivers/net/wireless/ath/ath10k/pci.c:3417:12: error: 'ath10k_pci_pm_resume' defined but not used [-Werror=unused-function] static int ath10k_pci_pm_resume(struct device *dev) ^~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/ath/ath10k/pci.c:3401:12: error: 'ath10k_pci_pm_suspend' defined but not used [-Werror=unused-function] static int ath10k_pci_pm_suspend(struct device *dev) Rather than fixing the #ifdef, this just marks both functions as __maybe_unused, which is a more robust way to do this. Fixes: 32faa3f0ee50 ("ath10k: add the PCI PM core suspend/resume ops") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| * | qtnfmac: cancel scans on wireless interface changesSergey Matyukevich2017-09-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cancel active scans and deactivate firmware scan watchdog timer when wireless interface configuration is changed. The usecases include wireless interface mode change, interface down, AP stop, virtual interface removal. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| * | qtnfmac: lock access to h/w in tx pathSergey Matyukevich2017-09-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | Fix tx path regression. Lock should be held when queuing packets to h/w fifos in order to properly handle configurations with multiple enabled interfaces. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| * | brcmfmac: setup passive scan if requested by user-spaceArend Van Spriel2017-09-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver was not properly configuring firmware with regard to the type of scan. It always performed an active scan even when user-space was requesting for passive scan, ie. the scan request was done without any SSIDs specified. Cc: stable@vger.kernel.org # v4.0.x Reported-by: Huang, Jiangyang <Jiangyang.Huang@itron.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| * | brcmfmac: add length check in brcmf_cfg80211_escan_handler()Arend Van Spriel2017-09-20
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | Upon handling the firmware notification for scans the length was checked properly and may result in corrupting kernel heap memory due to buffer overruns. This fix addresses CVE-2017-0786. Cc: stable@vger.kernel.org # v4.0.x Cc: Kevin Cernekee <cernekee@chromium.org> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| * Merge tag 'iwlwifi-for-kalle-2017-09-15' of ↵Kalle Valo2017-09-18
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes First set of fixes for 4.14 * A couple of bugzilla bugs related to multicast handling; * Two fixes for WoWLAN bugs that were causing queue hangs and re-initialization problems; * Two fixes for potential uninitialized variable use reported by Dan Carpenter in relation to a recently introduced patch; * A fix for buffer reordering in the newly supported 9000 device family; * Fix a race when starting aggregation; * Small fix for a recent patch to wake mac80211 queues; * Send non-bufferable management frames in the generic queue so they are not sent on queues that are under power-save;
| | * iwlwifi: mvm: fix reorder buffer for 9000 devicesSara Sharon2017-09-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The condition to check if reorder buffer ran out of space is faulty, as it takes into account only the NSSN. In case the head SN was too far behind the reorder buffer should move forward, regardless of the NSSN status. This caused the driver to release packets out of order in some scenarios. Fixes: b915c10174fb ("iwlwifi: mvm: add reorder buffer per queue") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
| | * iwlwifi: mvm: set status before calling iwl_mvm_send_cmd_status()Luca Coelho2017-09-08
| | | | | | | | | | | | | | | | | | | | | | | | We always must set the status to what we consider success before calling iwl_mvm_send_cmd_status() (also iwl_mvm_send_cmd_pdu_status() which calls it). Fix a few places where initialization is missing. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
| | * iwlwifi: mvm: initialize status in iwl_mvm_add_int_sta_common()Luca Coelho2017-09-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We always need to initialize the status argument to the success case before calling iwl_mvm_send_cmd_status() or iwl_mvm_send_cmd_pdu_status() (which calls the former) otherwise we may get an uninitialized value back. In this case, we use ADD_STA_SUCCESS as success. Fixes: 732d06e9d9cf ("iwlwifi: mvm: add station before allocating a queue") Reported by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
| | * iwlwifi: mvm: handle FIF_ALLMULTI when setting multicast addressesLuca Coelho2017-09-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We were ignoring the FIF_ALLMULTI flag when setting the multicast addresses with MCAST_FILTER_CMD. Check if this flag is set and enable pass_all accordingly. We also need to set the count to 0 if pass_all is enable so we don't pass addresses to the firmware when not needed (as doing so causes an assert). This fixes https://bugzilla.kernel.org/show_bug.cgi?id=196741 Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
| | * iwlwifi: mvm: use IWL_HCMD_NOCOPY for MCAST_FILTER_CMDLuca Coelho2017-09-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MCAST_FILTER_CMD can get quite large when we have many mcast addresses to set (we support up to 255). So the command should be send as NOCOPY to prevent a warning caused by too-long commands: WARNING: CPU: 0 PID: 9700 at /root/iwlwifi/stack-dev/drivers/net/wireless/intel/iwlwifi/pcie/tx.c:1550 iwl_pcie_enqueue_hcmd+0x8c7/0xb40 [iwlwifi] Command MCAST_FILTER_CMD (0x1d0) is too large (328 bytes) This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=196743 Cc: stable@vger.kernel.org Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
| | * iwlwifi: mvm: wake the correct mac80211 queueAvraham Stern2017-09-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | iwl_mvm_start_mac_queues() takes a bitmap of the queues to wake. When deferred tx is purged, set the bit of the hw_queue so the correct queue will be waken up. Fixes: 7e39a00d5931 ("iwlwifi: mvm: start mac queues when deferred tx frames are purged") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
| | * iwlwifi: mvm: change state when queueing agg start workNaftali Goldstein2017-09-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new state to enum iwl_mvm_agg_state, which is used between queueing the work that starts tx aggregations and actually starting that work (changing to state IWL_AGG_STARTING). This solves a race where ieee80211_start_tx_ba_session is called a second time, before the work queued by the first run has a chance to change the agg_state. In this case the second call to ieee80211_start_tx_ba_session returns an error, and the fallback is to abort the ba session start. Fixes: 482e48440a0e ("iwlwifi: mvm: change open and close criteria of a BA session") Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
| | * iwlwifi: mvm: send all non-bufferable frames on the probe queueAvraham Stern2017-09-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | AP interfaces now send all non-bufferable frames using the broadcast station. Thus allow them to use the probe queue and don't warn about it. Fixes: eb045e6e0389 ("iwlwifi: mvm: Avoid deferring non bufferable frames") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
| | * iwlwifi: mvm: Flush non STA TX queuesDavid Spinadel2017-09-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When starting wowlan mac80211 requests flush w/o vif and we ignore this request. As a result some packets stay stuck in the queue and it may end up with a queue hang. Allow the driver to flush queues even if station isn't specified. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit v1.2.2 (git 2.25.0) at 2025-08-30 14:11:55 -0400