aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* Merge branch 'pci/resource' into nextBjorn Helgaas2017-07-02
|\ | | | | | | | | | | | | | | | | * pci/resource: PCI: Work around poweroff & suspend-to-RAM issue on Macbook Pro 11 PCI: Do not disregard parent resources starting at 0x0 Conflicts: arch/x86/pci/fixup.c
| * PCI: Work around poweroff & suspend-to-RAM issue on Macbook Pro 11Bjorn Helgaas2017-06-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Neither soft poweroff (transition to ACPI power state S5) nor suspend-to-RAM (transition to state S3) works on the Macbook Pro 11,4 and 11,5. The problem is related to the [mem 0x7fa00000-0x7fbfffff] space. When we use that space, e.g., by assigning it to the 00:1c.0 Root Port, the ACPI Power Management 1 Control Register (PM1_CNT) at [io 0x1804] doesn't work anymore. Linux does a soft poweroff (transition to S5) by writing to PM1_CNT. The theory about why this doesn't work is: - The write to PM1_CNT causes an SMI - The BIOS SMI handler depends on something in [mem 0x7fa00000-0x7fbfffff] - When Linux assigns [mem 0x7fa00000-0x7fbfffff] to the 00:1c.0 Port, it covers up whatever the SMI handler uses, so the SMI handler no longer works correctly Reserve the [mem 0x7fa00000-0x7fbfffff] space so we don't assign it to anything. This is voodoo programming, since we don't know what the real conflict is, but we've failed to find the root cause. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=103211 Tested-by: thejoe@gmail.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Lukas Wunner <lukas@wunner.de> Cc: Chen Yu <yu.c.chen@intel.com>
| * PCI: Do not disregard parent resources starting at 0x0Ard Biesheuvel2017-05-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit f44116ae8818 ("PCI: Remove pci_find_parent_resource() use for allocation") updated the logic that iterates over all bus resources and compares them to a given resource, in order to decide whether one is the parent of the latter. This change inadvertently causes pci_find_parent_resource() to disregard resources starting at address 0x0, resulting in an error such as the one below on ARM systems whose I/O window starts at 0x0. pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff window] pci_bus 0000:00: root bus resource [io 0x0000-0xffff window] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff window] pci_bus 0000:00: root bus resource [bus 00-0f] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:02.0: PCI bridge to [bus 02] pci 0000:00:03.0: PCI bridge to [bus 03] pci 0000:00:03.0: can't claim BAR 13 [io 0x0000-0x0fff]: no compatible bridge window pci 0000:03:01.0: can't claim BAR 0 [io 0x0000-0x001f]: no compatible bridge window While this never happens on x86, it is perfectly legal in general for a PCI MMIO or IO window to start at address 0x0, and it was supported in the code before commit f44116ae8818. Drop the test for res->start != 0; resource_contains() already checks whether [start, end) completely covers the resource, and so it should be redundant. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | Merge branch 'pci/portdrv' into nextBjorn Helgaas2017-07-02
|\ \ | | | | | | | | | | | | | | | * pci/portdrv: PCI/portdrv: Allocate MSI/MSI-X vector for Downstream Port Containment PCI/portdrv: Support multiple interrupts for MSI as well as MSI-X
| * | PCI/portdrv: Allocate MSI/MSI-X vector for Downstream Port ContainmentGabriele Paoloni2017-06-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently pcie_port_enable_irq_vec() only allocates MSI/MSI-X vectors for PME, hotplug, and AER. The Downstream Port Containment feature also supports MSI/MSI-X interrupts, so allocate a vector for it, too. Signed-off-by: Liudongdong <liudongdong3@huawei.com> Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> [bhelgaas: changelog, comment] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
| * | PCI/portdrv: Support multiple interrupts for MSI as well as MSI-XGabriele Paoloni2017-06-16
| |/ | | | | | | | | | | | | | | | | | | | | | | | | Root Ports can generate several different interrupts using either MSI or MSI-X, but we only support that for MSI-X. Ports that support MSI but not MSI-X are currently limited to sharing a single interrupt. Rename pcie_port_enable_msix() to pcie_port_enable_irq_vec() and extend it to support multiple interrupts using either MSI-X (preferred) or MSI. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> [bhelgaas: changelog, reword comments, simplify PME/hotplug no-MSI logic] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
* | Merge branch 'pci/pm' into nextBjorn Helgaas2017-07-02
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/pm: PCI/PM: Avoid using device_may_wakeup() for runtime PM x86/PCI: Avoid AMD SB7xx EHCI USB wakeup defect PCI/PM: Restore the status of PCI devices across hibernation drm/radeon: make MacBook Pro d3_delay quirk more generic drm/amdgpu: remove unnecessary save/restore of pdev->d3_delay PCI/PM: Add needs_resume flag to avoid suspend complete optimization PCI: imx6: Fix config read timeout handling switchtec: Fix minor bug with partition ID register switchtec: Use new cdev_device_add() helper function PCI: endpoint: Make PCI_ENDPOINT depend on HAS_DMA
| * | PCI/PM: Avoid using device_may_wakeup() for runtime PMRafael J. Wysocki2017-06-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pci_target_state() calls device_may_wakeup() which checks whether or not the device may wake up the system from sleep states, but pci_target_state() is used for runtime PM too. Since runtime PM is expected to always enable remote wakeup if possible, modify pci_target_state() to take additional argument indicating whether or not it should look for a state from which the device can signal wakeup and pass either the return value of device_can_wakeup(), or "false" (if the device itself is not wakeup-capable) to it from the code related to runtime PM. While at it, fix the comment in pci_dev_run_wake() which is not about sleep states. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
| * | x86/PCI: Avoid AMD SB7xx EHCI USB wakeup defectKai-Heng Feng2017-06-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On an AMD Carrizo laptop, when EHCI runtime PM is enabled, EHCI ports do not assert PME# for device plug/unplug events while in D3. As Alan Stern points out [1], the PME signal is not enabled when controller is in D3, therefore it's not being woken up when new devices get plugged in. Testing shows PME signal works when the EHCI power state is D2. Clear the PCI_PM_CAP_PME_D3 and PCI_PM_CAP_PME_D3cold bits in dev->pme_support to indicate the device will not assert PME# from those states. [1] http://lkml.kernel.org/r/Pine.LNX.4.44L0.1706121010010.2092-100000@iolanthe.rowland.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=196091 Link: https://support.amd.com/TechDocs/46837.pdf (Section 23) Link: https://support.amd.com/TechDocs/42413.pdf (Appendix A2) Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> [bhelgaas: changelog, add parens in quirk] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | PCI/PM: Restore the status of PCI devices across hibernationChen Yu2017-06-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we saw a lot of "No irq handler" errors during hibernation, which caused the system hang finally: ata4.00: qc timeout (cmd 0xec) ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4) ata4.00: revalidation failed (errno=-5) ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) do_IRQ: 31.151 No irq handler for vector According to above logs, there is an interrupt triggered and it is dispatched to CPU31 with a vector number 151, but there is no handler for it, thus this IRQ will not get acked and will cause an IRQ flood which kills the system. To be more specific, the 31.151 is an interrupt from the AHCI host controller. After some investigation, the reason why this issue is triggered is because the thaw_noirq() function does not restore the MSI/MSI-X settings across hibernation. The scenario is illustrated below: 1. Before hibernation, IRQ 34 is the handler for the AHCI device, which is bound to CPU31. 2. Hibernation starts, the AHCI device is put into low power state. 3. All the nonboot CPUs are put offline, so IRQ 34 has to be migrated to the last alive one - CPU0. 4. After the snapshot has been created, all the nonboot CPUs are brought up again; IRQ 34 remains bound to CPU0. 5. AHCI devices are put into D0. 6. The snapshot is written to the disk. The issue is triggered in step 6. The AHCI interrupt should be delivered to CPU0, however it is delivered to the original CPU31 instead, which causes the "No irq handler" issue. Ying Huang has provided a clue that, in step 3 it is possible that writing to the register might not take effect as the PCI devices have been suspended. In step 3, the IRQ 34 affinity should be modified from CPU31 to CPU0, but in fact it is not. In __pci_write_msi_msg(), if the device is already in low power state, the low level MSI message entry will not be updated but cached. During the device restore process after a normal suspend/resume, pci_restore_msi_state() writes the cached MSI back to the hardware. But this is not the case for hibernation. pci_restore_msi_state() is not currently called in pci_pm_thaw_noirq(), although pci_save_state() has saved the necessary PCI cached information in pci_pm_freeze_noirq(). Restore the PCI status for the device during hibernation. Otherwise the status might be lost across hibernation (for example, settings for MSI, MSI-X, ATS, ACS, IOV, etc.), which might cause problems during hibernation. Suggested-by: Ying Huang <ying.huang@intel.com> Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: stable@vger.kernel.org Cc: Len Brown <len.brown@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: Ying Huang <ying.huang@intel.com>
| * | drm/radeon: make MacBook Pro d3_delay quirk more genericBjorn Helgaas2017-06-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PCI Power Management Spec, r1.2, sec 5.6.1, requires a 10 millisecond delay when powering on a device, i.e., transitioning from state D3hot to D0. Apparently some devices require more time, and d1f9809ed131 ("drm/radeon: add quirk for d3 delay during switcheroo poweron for apple macbooks") added an additional delay for the Radeon device in a MacBook Pro. 4807c5a8a0c8 ("drm/radeon: add a PX quirk list") made the affected device more explicit. Add a generic PCI quirk to increase the d3_delay. This means we will use the additional delay for *all* wakeups from D3, not just those initiated by radeon_switcheroo_set_state(). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> CC: Maarten Lankhorst <maarten.lankhorst@canonical.com>
| * | drm/amdgpu: remove unnecessary save/restore of pdev->d3_delayBjorn Helgaas2017-06-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove unnecessary save/restore of pdev->d3_delay. The only assignments to pdev->d3_delay are in radeon_switcheroo_set_state() and some quirks, none of which should be relevant in the amdgpu_switcheroo_set_state() path. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com>
| * | PCI/PM: Add needs_resume flag to avoid suspend complete optimizationImre Deak2017-05-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some drivers - like i915 - may not support the system suspend direct complete optimization due to differences in their runtime and system suspend sequence. Add a flag that when set resumes the device before calling the driver's system suspend handlers which effectively disables the optimization. Needed by a future patch fixing suspend/resume on i915. Suggested by Rafael. Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: stable@vger.kernel.org
| * | PCI: imx6: Fix config read timeout handlingLucas Stach2017-05-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit cc7b0d495589 ("PCI: designware: Update PCI config space remap function") made PCI configuration requests non-posted, which means we now get a synchronous abort when the CFG space read to probe for downstream devices times out. Synchronous aborts need to be handled differently from the async aborts we were getting before, in particular the PC needs to be advanced when resolving the abort. This is mostly a copy of what other PCI drivers do on ARM to handle those aborts. [bhelgaas: changelog, "Fixes"] Fixes: cc7b0d495589 ("PCI: designware: Update PCI config space remap function") Tested-by: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: Peter Senna Tschudin <peter.senna@collabora.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
| * | switchtec: Fix minor bug with partition ID registerLogan Gunthorpe2017-05-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a switch endpoint is configured without NTB, the mmio_ntb registers will read all zeros. However, in corner case configurations where the partition ID is not zero and NTB is not enabled, the code will have the wrong partition ID and this causes the driver to use the wrong set of drivers. To fix this we simply take the partition ID from the system info region. Reported-by: Dingbao Chen <dingbao.chen@microsemi.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | switchtec: Use new cdev_device_add() helper functionLogan Gunthorpe2017-05-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | Convert from "cdev_add() + device_add()" to cdev_device_add(), and from "device_del() + cdev_del()" to cdev_device_del(). [bhelgaas: changelog] Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | PCI: endpoint: Make PCI_ENDPOINT depend on HAS_DMAGeert Uytterhoeven2017-05-22
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If NO_DMA=y: drivers/built-in.o: In function `__pci_epc_create': (.text+0xef4e): undefined reference to `bad_dma_ops' drivers/built-in.o: In function `pci_epc_add_epf': (.text+0xf676): undefined reference to `bad_dma_ops' drivers/built-in.o: In function `pci_epf_alloc_space': (.text+0xfa32): undefined reference to `bad_dma_ops' drivers/built-in.o: In function `pci_epf_free_space': (.text+0xfac4): undefined reference to `bad_dma_ops' Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | Merge branch 'pci/msi' into nextBjorn Helgaas2017-07-02
|\ \ | | | | | | | | | | | | * pci/msi: PCI/MSI: Ignore affinity if pre/post vector count is more than min_vecs
| * | PCI/MSI: Ignore affinity if pre/post vector count is more than min_vecsMichael Hernandez2017-05-22
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | min_vecs is the minimum amount of vectors needed to operate in MSI-X mode which may just include the vectors that don't need affinity. Disabling affinity settings causes the qla2xxx driver scsi_add_host() to fail when blk_mq is enabled as the blk_mq_pci_map_queues() expects affinity masks on each vector. Fixes: dfef358bd1be ("PCI/MSI: Don't apply affinity if there aren't enough vectors left") Signed-off-by: Michael Hernandez <michael.hernandez@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org # v4.10+
* | Merge branch 'pci/misc' into nextBjorn Helgaas2017-07-02
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/misc: x86/PCI: Simplify Dell DMI B1 quirk PCI: Add domain number check to find_smbios_instance_string() x86/PCI: Fix whitespace in set_bios_x() printk PCI: Correct PCI_STD_RESOURCE_END usage efi/fb: Correct PCI_STD_RESOURCE_END usage MIPS: PCI: Remove unused busn_offset MIPS: Loongson: Remove unused PCI_BAR_COUNT definition
| * | x86/PCI: Simplify Dell DMI B1 quirkJean Delvare2017-06-15
| | | | | | | | | | | | | | | | | | | | | | | | No need for such convoluted code, when all we need is to call one function in one specific case. Tested-by: Narendra K <Narendra.K@dell.com> # DellEMC PowerEdge 1950, R730XD Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | PCI: Add domain number check to find_smbios_instance_string()Sujith Pandel2017-06-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function find_smbios_instance_string() does not consider the PCI domain number. As a result, SMBIOS type 41 device type instance would be exported to sysfs for all the PCI domains which have a PCI device with same bus/device/function, though PCI bus/device/func from a specific PCI domain has SMBIOS type 41 device type instance defined. Address the issue by making find_smbios_instance_string() check PCI domain number as well. Reported-by: Shai Fultheim <Shai@ScaleMP.com> Suggested-by: Shai Fultheim <Shai@ScaleMP.com> Tested-by: Shai Fultheim <Shai@ScaleMP.com> Signed-off-by: Sujith Pandel <sujithpshankar@gmail.com> Signed-off-by: Narendra K <Narendra_K@Dell.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | x86/PCI: Fix whitespace in set_bios_x() printkVincent Legoll2017-06-13
| | | | | | | | | | | | | | | | | | | | | Remove the space from "PCI :" to make the message consistent with other PCI messages. Signed-off-by: Vincent Legoll <vincent.legoll@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | PCI: Correct PCI_STD_RESOURCE_END usageBjorn Helgaas2017-06-13
| | | | | | | | | | | | | | | | | | | | | | | | PCI_STD_RESOURCE_END is (confusingly) the index of the last valid BAR, not the *number* of BARs. To iterate through all possible BARs, we need to include PCI_STD_RESOURCE_END. Fixes: 9fe373f9997b ("PCI: Increase IBM ipr SAS Crocodile BARs to at least system page size") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | efi/fb: Correct PCI_STD_RESOURCE_END usageBjorn Helgaas2017-06-13
| | | | | | | | | | | | | | | | | | | | | | | | PCI_STD_RESOURCE_END is (confusingly) the index of the last valid BAR, not the *number* of BARs. To iterate through all possible BARs, we need to include PCI_STD_RESOURCE_END. Fixes: 55d728a40d36 ("efi/fb: Avoid reconfiguration of BAR that covers the framebuffer") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | MIPS: PCI: Remove unused busn_offsetBjorn Helgaas2017-05-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pci_add_resource_offset() is for host bridge windows where the bridge translates CPU addresses to PCI bus addresses by adding an offset. To my knowledge, no host bridge translates bus numbers, so this is only useful for MEM and IO windows. In any event, host->busn_offset is never set to anything other than zero, so pci_add_resource() is sufficient. a2e50f53d535 ("MIPS: PCI: Add a hook for IORESOURCE_BUS in pci_controller/bridge_controller") also added busn_resource itself. This is currently unused but may be used by future SGI IP27 fixes, so I left it there. Tested-by: Joshua Kinard <kumba@gentoo.org> # SGI IP30 and IP27 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Joshua Kinard <kumba@gentoo.org>
| * | MIPS: Loongson: Remove unused PCI_BAR_COUNT definitionBjorn Helgaas2017-05-18
| |/ | | | | | | | | | | Remove unused PCI_BAR_COUNT definition. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | Merge branch 'pci/enumeration' into nextBjorn Helgaas2017-07-02
|\ \ | | | | | | | | | | | | | | | | | | * pci/enumeration: PCI: Enable ECRC only if device supports it PCI: Add sysfs max_link_speed/width, current_link_speed/width, etc PCI: Test INTx masking during enumeration, not at run-time
| * | PCI: Enable ECRC only if device supports itBjorn Helgaas2017-06-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | John reported that an Intel QuickAssist crypto accelerator didn't work in a Dell PowerEdge R730. The problem seems to be that we enabled ECRC when the device doesn't support it: 85:00.0 Co-processor [0b40]: Intel Corporation DH895XCC Series QAT [8086:0435] Capabilities: [100 v1] Advanced Error Reporting AERCap: First Error Pointer: 00, GenCap- CGenEn+ ChkCap- ChkEn+ 1302fcf0d03e ("PCI: Configure *all* devices, not just hot-added ones") exposed the problem because it applies settings from the _HPX method to all devices, not just hot-added ones. The R730 supplies an _HPX method that allows the kernel to enable ECRC. Only enable ECRC if the device advertises support for it. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1571798 Fixes: 1302fcf0d03e ("PCI: Configure *all* devices, not just hot-added ones") Reported-by: John Mazzie <john_mazzie@dell.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | PCI: Add sysfs max_link_speed/width, current_link_speed/width, etcWong Vee Khee2017-06-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Expose PCIe bridges attributes such as secondary bus number, subordinate bus number, max link speed and link width, current link speed and link width via sysfs in /sys/bus/pci/devices/... This information is available via lspci, but that requires root privilege. Signed-off-by: Wong Vee Khee <vee.khee.wong@ni.com> Signed-off-by: Hui Chun Ong <hui.chun.ong@ni.com> [bhelgaas: changelog, return errors early to unindent usual case, return errors with same style throughout] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | PCI: Test INTx masking during enumeration, not at run-timePiotr Gregor2017-06-16
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The test for INTx masking via PCI_COMMAND_INTX_DISABLE performed in pci_intx_mask_supported() should be done before the device can be used. This is to avoid writing PCI_COMMAND while the driver owns the device, in case that has any effect on MSI/MSI-X interrupts. Move the content of pci_intx_mask_supported() to pci_intx_mask_broken() and call it from pci_setup_device(). The test result can be queried at any time later using the same pci_intx_mask_supported() interface as before (though with changed implementation), so callers (uio, vfio) should be unaffected. Signed-off-by: Piotr Gregor <piotrgregor@rsyncme.org> [bhelgaas: changelog, remove quirk check, remove locking, move dev->broken_intx_masking assignment to caller] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
* | Merge branch 'pci/dpc' into nextBjorn Helgaas2017-07-02
|\ \ | |/ |/| | | | | | | * pci/dpc: PCI/DPC: Fix control register setting PCI/DPC: Skip DPC event if device is not present
| * PCI/DPC: Fix control register settingKeith Busch2017-05-22
| | | | | | | | | | | | | | | | | | | | | | This driver was OR'ing desired bits from the existing control setting. That could create an invalid DPC Trigger Enabled configuration if the platform previously set this to "ERR_FATAL", 01b. The driver currently wants to set this to ERR_NONFATAL/ERR_FATAL, 10b, and the logical OR of this gets 11b, which is reserved. Fix that by masking off the fields it is setting. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * PCI/DPC: Skip DPC event if device is not presentKeith Busch2017-05-22
|/ | | | | | | | The DPC interupt may be executed on a device that is being removed. Skip queuing event handling if the status is all 1's, which should be seen only if the device is not present. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* Linux 4.12-rc1Linus Torvalds2017-05-13
|
* Merge branch 'for-linus' of ↵Linus Torvalds2017-05-13
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull some more input subsystem updates from Dmitry Torokhov: "An updated xpad driver with a few more recognized device IDs, and a new psxpad-spi driver, allowing connecting Playstation 1 and 2 joypads via SPI bus" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: cros_ec_keyb - remove extraneous 'const' Input: add support for PlayStation 1/2 joypads connected via SPI Input: xpad - add USB IDs for Mad Catz Brawlstick and Razer Sabertooth Input: xpad - sync supported devices with xboxdrv Input: xpad - sort supported devices by USB ID
| * Input: cros_ec_keyb - remove extraneous 'const'Arnd Bergmann2017-05-11
| | | | | | | | | | | | | | | | | | | | | | | | | | gcc-7 warns about 'const SIMPLE_DEV_PM_OPS', as that macro already contains a 'const' keyword: drivers/input/keyboard/cros_ec_keyb.c:663:14: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const SIMPLE_DEV_PM_OPS(cros_ec_keyb_pm_ops, NULL, cros_ec_keyb_resume); This removes the extra one. Fixes: 6af6dc2d2aa6 ("input: Add ChromeOS EC keyboard driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: add support for PlayStation 1/2 joypads connected via SPITomohiro Yoshidomi2017-05-10
| | | | | | | | | | | | | | | | PlayStation 1/2 joypads can be connected directly to the SPI interface. Signed-off-by: Tomohiro Yoshidomi <sylph23k@gmail.com> Acked-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: xpad - add USB IDs for Mad Catz Brawlstick and Razer SabertoothBenjamin Valentin2017-05-07
| | | | | | | | | | | | | | | | | | | | | | | | Add USB IDs for two more Xbox 360 controllers. I found them in the pull requests for the xboxdrv userspace driver, which seems abandoned. Thanks to psychogony and mkaito for reporting the IDs there! Signed-off-by: Benjamin Valentin <benpicco@googlemail.com> Reviewed-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: xpad - sync supported devices with xboxdrvBenjamin Valentin2017-05-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The userspace xboxdrv driver [0] contains some USB IDs unknown to the kernel driver. I have created a simple script [1] to extract the missing devices and add them to xpad. A quick google search confirmed that all the new devices called Fightstick/pad are Arcade-type devices [2] where the MAP_TRIGGERS_TO_BUTTONS option should apply. There are some similar devices in the existing device table where this flag is not set, but I did refrain from changing those. [0] https://github.com/xboxdrv/xboxdrv/blob/stable/src/xpad_device.cpp [1] http://codepad.org/CHV98BNH [2] https://www.google.com/search?q=SFxT+Fightstick+Pro&tbm=isch Signed-off-by: Benjamin Valentin <benpicco@googlemail.com> Reviewed-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: xpad - sort supported devices by USB IDBenjamin Valentin2017-05-07
| | | | | | | | | | | | | | | | Some entries in the table of supported devices are out of order. To not create a mess when adding new ones using a script, sort them first. Signed-off-by: Benjamin Valentin <benpicco@googlemail.com> Reviewed-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | Merge tag 'upstream-4.12-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds2017-05-13
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull UBI/UBIFS updates from Richard Weinberger: - new config option CONFIG_UBIFS_FS_SECURITY - minor improvements - random fixes * tag 'upstream-4.12-rc1' of git://git.infradead.org/linux-ubifs: ubi: Add debugfs file for tracking PEB state ubifs: Fix a typo in comment of ioctl2ubifs & ubifs2ioctl ubifs: Remove unnecessary assignment ubifs: Fix cut and paste error on sb type comparisons ubi: fastmap: Fix slab corruption ubifs: Add CONFIG_UBIFS_FS_SECURITY to disable/enable security labels ubi: Make mtd parameter readable ubi: Fix section mismatch
| * | ubi: Add debugfs file for tracking PEB stateBen Shelton2017-05-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a file under debugfs to allow easy access to the erase count for each physical erase block on an UBI device. This is useful when debugging data integrity issues with UBIFS on NAND flash devices. Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Zach Brown <zach.brown@ni.com> v2: * If ubi_io_is_bad eraseblk_count_seq_show just returns the err. * if ubi->lookuptbl returns null, its no longer treated as an error instead info for that block is not printeded * Removed check for UBI_MAX_ERASECOUNTER since it is impossible to hit * Removed block state from print, if a block is printed then it is good and if it is not printed, then it is bad. v3: * Remove errant ! symbol from if statement checking if erase count is valid. Signed-off-by: Richard Weinberger <richard@nod.at>
| * | ubifs: Fix a typo in comment of ioctl2ubifs & ubifs2ioctlRock Lee2017-05-08
| | | | | | | | | | | | | | | | | | | | | | | | Change 'convert' to 'converts' Change 'UBIFS' to 'UBIFS inode flags' Signed-off-by: Rock Lee <rockdotlee@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
| * | ubifs: Remove unnecessary assignmentStefan Agner2017-05-08
| | | | | | | | | | | | | | | | | | | | | Assigning a value of a variable to itself is not useful. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Richard Weinberger <richard@nod.at>
| * | ubifs: Fix cut and paste error on sb type comparisonsColin Ian King2017-05-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The check for the bad node type of sb->type is checking sa->type and not sb-type. This looks like a cut and paste error. Fix this. Detected by PVS-Studio, warning: V581 Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Richard Weinberger <richard@nod.at>
| * | ubi: fastmap: Fix slab corruptionRabin Vincent2017-05-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Booting with UBI fastmap and SLUB debugging enabled results in the following splats. The problem is that ubi_scan_fastmap() moves the fastmap blocks from the scan_ai (allocated in scan_fast()) to the ai allocated in ubi_attach(). This results in two problems: - When the scan_ai is freed, aebs which were allocated from its slab cache are still in use. - When the other ai is being destroyed in destroy_ai(), the arguments to kmem_cache_free() call are incorrect since aebs on its ->fastmap list were allocated with a slab cache from a differnt ai. Fix this by making a copy of the aebs in ubi_scan_fastmap() instead of moving them. ============================================================================= BUG ubi_aeb_slab_cache (Not tainted): Objects remaining in ubi_aeb_slab_cache on __kmem_cache_shutdown() ----------------------------------------------------------------------------- INFO: Slab 0xbfd2da3c objects=17 used=1 fp=0xb33d7748 flags=0x40000080 CPU: 1 PID: 118 Comm: ubiattach Tainted: G B 4.9.15 #3 [<80111910>] (unwind_backtrace) from [<8010d498>] (show_stack+0x18/0x1c) [<8010d498>] (show_stack) from [<804a3274>] (dump_stack+0xb4/0xe0) [<804a3274>] (dump_stack) from [<8026c47c>] (slab_err+0x78/0x88) [<8026c47c>] (slab_err) from [<802735bc>] (__kmem_cache_shutdown+0x180/0x3e0) [<802735bc>] (__kmem_cache_shutdown) from [<8024e13c>] (shutdown_cache+0x1c/0x60) [<8024e13c>] (shutdown_cache) from [<8024ed64>] (kmem_cache_destroy+0x19c/0x20c) [<8024ed64>] (kmem_cache_destroy) from [<8057cc14>] (destroy_ai+0x1dc/0x1e8) [<8057cc14>] (destroy_ai) from [<8057f04c>] (ubi_attach+0x3f4/0x450) [<8057f04c>] (ubi_attach) from [<8056fe70>] (ubi_attach_mtd_dev+0x60c/0xff8) [<8056fe70>] (ubi_attach_mtd_dev) from [<80571d78>] (ctrl_cdev_ioctl+0x110/0x2b8) [<80571d78>] (ctrl_cdev_ioctl) from [<8029c77c>] (do_vfs_ioctl+0xac/0xa00) [<8029c77c>] (do_vfs_ioctl) from [<8029d10c>] (SyS_ioctl+0x3c/0x64) [<8029d10c>] (SyS_ioctl) from [<80108860>] (ret_fast_syscall+0x0/0x1c) INFO: Object 0xb33d7e88 @offset=3720 INFO: Allocated in scan_peb+0x608/0x81c age=72 cpu=1 pid=118 kmem_cache_alloc+0x3b0/0x43c scan_peb+0x608/0x81c ubi_attach+0x124/0x450 ubi_attach_mtd_dev+0x60c/0xff8 ctrl_cdev_ioctl+0x110/0x2b8 do_vfs_ioctl+0xac/0xa00 SyS_ioctl+0x3c/0x64 ret_fast_syscall+0x0/0x1c kmem_cache_destroy ubi_aeb_slab_cache: Slab cache still has objects CPU: 1 PID: 118 Comm: ubiattach Tainted: G B 4.9.15 #3 [<80111910>] (unwind_backtrace) from [<8010d498>] (show_stack+0x18/0x1c) [<8010d498>] (show_stack) from [<804a3274>] (dump_stack+0xb4/0xe0) [<804a3274>] (dump_stack) from [<8024ed80>] (kmem_cache_destroy+0x1b8/0x20c) [<8024ed80>] (kmem_cache_destroy) from [<8057cc14>] (destroy_ai+0x1dc/0x1e8) [<8057cc14>] (destroy_ai) from [<8057f04c>] (ubi_attach+0x3f4/0x450) [<8057f04c>] (ubi_attach) from [<8056fe70>] (ubi_attach_mtd_dev+0x60c/0xff8) [<8056fe70>] (ubi_attach_mtd_dev) from [<80571d78>] (ctrl_cdev_ioctl+0x110/0x2b8) [<80571d78>] (ctrl_cdev_ioctl) from [<8029c77c>] (do_vfs_ioctl+0xac/0xa00) [<8029c77c>] (do_vfs_ioctl) from [<8029d10c>] (SyS_ioctl+0x3c/0x64) [<8029d10c>] (SyS_ioctl) from [<80108860>] (ret_fast_syscall+0x0/0x1c) cache_from_obj: Wrong slab cache. ubi_aeb_slab_cache but object is from ubi_aeb_slab_cache ------------[ cut here ]------------ WARNING: CPU: 1 PID: 118 at mm/slab.h:354 kmem_cache_free+0x39c/0x450 Modules linked in: CPU: 1 PID: 118 Comm: ubiattach Tainted: G B 4.9.15 #3 [<80111910>] (unwind_backtrace) from [<8010d498>] (show_stack+0x18/0x1c) [<8010d498>] (show_stack) from [<804a3274>] (dump_stack+0xb4/0xe0) [<804a3274>] (dump_stack) from [<80120e40>] (__warn+0xf4/0x10c) [<80120e40>] (__warn) from [<80120f20>] (warn_slowpath_null+0x28/0x30) [<80120f20>] (warn_slowpath_null) from [<80271fe0>] (kmem_cache_free+0x39c/0x450) [<80271fe0>] (kmem_cache_free) from [<8057cb88>] (destroy_ai+0x150/0x1e8) [<8057cb88>] (destroy_ai) from [<8057ef1c>] (ubi_attach+0x2c4/0x450) [<8057ef1c>] (ubi_attach) from [<8056fe70>] (ubi_attach_mtd_dev+0x60c/0xff8) [<8056fe70>] (ubi_attach_mtd_dev) from [<80571d78>] (ctrl_cdev_ioctl+0x110/0x2b8) [<80571d78>] (ctrl_cdev_ioctl) from [<8029c77c>] (do_vfs_ioctl+0xac/0xa00) [<8029c77c>] (do_vfs_ioctl) from [<8029d10c>] (SyS_ioctl+0x3c/0x64) [<8029d10c>] (SyS_ioctl) from [<80108860>] (ret_fast_syscall+0x0/0x1c) ---[ end trace 2bd8396277fd0a0b ]--- ============================================================================= BUG ubi_aeb_slab_cache (Tainted: G B W ): page slab pointer corrupt. ----------------------------------------------------------------------------- INFO: Allocated in scan_peb+0x608/0x81c age=104 cpu=1 pid=118 kmem_cache_alloc+0x3b0/0x43c scan_peb+0x608/0x81c ubi_attach+0x124/0x450 ubi_attach_mtd_dev+0x60c/0xff8 ctrl_cdev_ioctl+0x110/0x2b8 do_vfs_ioctl+0xac/0xa00 SyS_ioctl+0x3c/0x64 ret_fast_syscall+0x0/0x1c INFO: Slab 0xbfd2da3c objects=17 used=1 fp=0xb33d7748 flags=0x40000081 INFO: Object 0xb33d7e88 @offset=3720 fp=0xb33d7da0 Redzone b33d7e80: cc cc cc cc cc cc cc cc ........ Object b33d7e88: 02 00 00 00 01 00 00 00 00 f0 ff 7f ff ff ff ff ................ Object b33d7e98: 00 00 00 00 00 00 00 00 bd 16 00 00 00 00 00 00 ................ Object b33d7ea8: 00 01 00 00 00 02 00 00 00 00 00 00 00 00 00 00 ................ Redzone b33d7eb8: cc cc cc cc .... Padding b33d7f60: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ CPU: 1 PID: 118 Comm: ubiattach Tainted: G B W 4.9.15 #3 [<80111910>] (unwind_backtrace) from [<8010d498>] (show_stack+0x18/0x1c) [<8010d498>] (show_stack) from [<804a3274>] (dump_stack+0xb4/0xe0) [<804a3274>] (dump_stack) from [<80271770>] (free_debug_processing+0x320/0x3c4) [<80271770>] (free_debug_processing) from [<80271ad0>] (__slab_free+0x2bc/0x430) [<80271ad0>] (__slab_free) from [<80272024>] (kmem_cache_free+0x3e0/0x450) [<80272024>] (kmem_cache_free) from [<8057cb88>] (destroy_ai+0x150/0x1e8) [<8057cb88>] (destroy_ai) from [<8057ef1c>] (ubi_attach+0x2c4/0x450) [<8057ef1c>] (ubi_attach) from [<8056fe70>] (ubi_attach_mtd_dev+0x60c/0xff8) [<8056fe70>] (ubi_attach_mtd_dev) from [<80571d78>] (ctrl_cdev_ioctl+0x110/0x2b8) [<80571d78>] (ctrl_cdev_ioctl) from [<8029c77c>] (do_vfs_ioctl+0xac/0xa00) [<8029c77c>] (do_vfs_ioctl) from [<8029d10c>] (SyS_ioctl+0x3c/0x64) [<8029d10c>] (SyS_ioctl) from [<80108860>] (ret_fast_syscall+0x0/0x1c) FIX ubi_aeb_slab_cache: Object at 0xb33d7e88 not freed Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Richard Weinberger <richard@nod.at>
| * | ubifs: Add CONFIG_UBIFS_FS_SECURITY to disable/enable security labelsHyunchul Lee2017-05-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When write syscall is called, every time security label is searched to determine that file's privileges should be changed. If LSM(Linux Security Model) is not used, this is useless. So introduce CONFIG_UBIFS_SECURITY to disable security labels. it's default value is "y". Signed-off-by: Hyunchul Lee <cheol.lee@lge.com> Signed-off-by: Richard Weinberger <richard@nod.at>
| * | ubi: Make mtd parameter readableAndy Shevchenko2017-05-08
| | | | | | | | | | | | | | | | | | | | | Fix permissions to allow read mtd parameter back (only for owner). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
| * | ubi: Fix section mismatchAndy Shevchenko2017-05-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | WARNING: vmlinux.o(.text+0x1f2a80): Section mismatch in reference from the variable __param_ops_mtd to the function .init.text:ubi_mtd_param_parse() The function __param_ops_mtd() references the function __init ubi_mtd_param_parse(). This is often because __param_ops_mtd lacks a __init annotation or the annotation of ubi_mtd_param_parse is wrong. Cc: Richard Weinberger <richard@nod.at> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
generated by cgit v1.2.2 (git 2.25.0) at 2025-08-28 05:07:37 -0400