aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* xfs: set up per-AG free space reservationsDarrick J. Wong2016-09-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One unfortunate quirk of the reference count and reverse mapping btrees -- they can expand in size when blocks are written to *other* allocation groups if, say, one large extent becomes a lot of tiny extents. Since we don't want to start throwing errors in the middle of CoWing, we need to reserve some blocks to handle future expansion. The transaction block reservation counters aren't sufficient here because we have to have a reserve of blocks in every AG, not just somewhere in the filesystem. Therefore, create two per-AG block reservation pools. One feeds the AGFL so that rmapbt expansion always succeeds, and the other feeds all other metadata so that refcountbt expansion never fails. Use the count of how many reserved blocks we need to have on hand to create a virtual reservation in the AG. Through selective clamping of the maximum length of allocation requests and of the length of the longest free extent, we can make it look like there's less free space in the AG unless the reservation owner is asking for blocks. In other words, play some accounting tricks in-core to make sure that we always have blocks available. On the plus side, there's nothing to clean up if we crash, which is contrast to the strategy that the rough draft used (actually removing extents from the freespace btrees). Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
* xfs: defer should allow ->finish_item to request a new transactionDarrick J. Wong2016-09-18
| | | | | | | | | | | | | | | When xfs_defer_finish calls ->finish_item, it's possible that (refcount) won't be able to finish all the work in a single transaction. When this happens, the ->finish_item handler should shorten the log done item's list count, update the work item to reflect where work should continue, and return -EAGAIN so that defer_finish knows to retain the pending item on the pending list, roll the transaction, and restart processing where we left off. Plumb in the code and document how this mechanism is supposed to work. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
* xfs: count the blocks in a btreeDarrick J. Wong2016-09-18
| | | | | | | | | | | Provide a helper method to count the number of blocks in a short form btree. The refcount and rmap btrees need to know the number of blocks already in use to set up their per-AG block reservations during mount. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
* xfs: create a standard btree size calculator codeDarrick J. Wong2016-09-18
| | | | | | | | | | Create a helper to generate AG btree height calculator functions. This will be used (much) later when we get to the refcount btree. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
* xfs: remove xfs_btree_bigkeyDarrick J. Wong2016-09-18
| | | | | | | | | | Remove the xfs_btree_bigkey mess and simply make xfs_btree_key big enough to hold both keys in-core. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
* xfs: convert RUI log formats to use variable length arraysDarrick J. Wong2016-09-18
| | | | | | | | | | Use variable length array declarations for RUI log items, and replace the open coded sizeof formulae with a single function. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
* xfs: track log done items directly in the deferred pending work itemDarrick J. Wong2016-08-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Christoph reports slab corruption when a deferred refcount update aborts during _defer_finish(). The cause of this was broken log item state tracking in xfs_defer_pending -- upon an abort, _defer_trans_abort() will call abort_intent on all intent items, including the ones that have already had a done item attached. This is incorrect because each intent item has 2 refcount: the first is released when the intent item is committed to the log; and the second is released when the _done_ item is committed to the log, or by the intent creator if there is no done item. In other words, once we log the done item, responsibility for releasing the intent item's second refcount is transferred to the done item and /must not/ be performed by anything else. The dfp_committed flag should have been tracking whether or not we had a done item so that _defer_trans_abort could decide if it needs to abort the intent item, but due to a thinko this was not the case. Rip it out and track the done item directly so that we do the right thing w.r.t. intent item freeing. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reported-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
* iomap: don't set FIEMAP_EXTENT_MERGED for extent based filesystemsChristoph Hellwig2016-08-28
| | | | | | | | | | | | | | | | Filesystems like XFS that use extents should not set the FIEMAP_EXTENT_MERGED flag in the fiemap extent structures. To allow for both behaviors for the upcoming gfs2 usage split the iomap type field into type and flags, and only set FIEMAP_EXTENT_MERGED if the IOMAP_F_MERGED flag is set. The flags field will also come in handy for future features such as shared extents on reflink-enabled file systems. Reported-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
* xfs: prevent dropping ioend completions during buftarg waitBrian Foster2016-08-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xfs_wait_buftarg() waits for all pending I/O, drains the ioend completion workqueue and walks the LRU until all buffers in the cache have been released. This is traditionally an unmount operation` but the mechanism is also reused during filesystem freeze. xfs_wait_buftarg() invokes drain_workqueue() as part of the quiesce, which is intended more for a shutdown sequence in that it indicates to the queue that new operations are not expected once the drain has begun. New work jobs after this point result in a WARN_ON_ONCE() and are otherwise dropped. With filesystem freeze, however, read operations are allowed and can proceed during or after the workqueue drain. If such a read occurs during the drain sequence, the workqueue infrastructure complains about the queued ioend completion work item and drops it on the floor. As a result, the buffer remains on the LRU and the freeze never completes. Despite the fact that the overall buffer cache cleanup is not necessary during freeze, fix up this operation such that it is safe to invoke during non-unmount quiesce operations. Replace the drain_workqueue() call with flush_workqueue(), which runs a similar serialization on pending workqueue jobs without causing new jobs to be dropped. This is safe for unmount as unmount independently locks out new operations by the time xfs_wait_buftarg() is invoked. cc: <stable@vger.kernel.org> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
* xfs: fix superblock inprogress checkDave Chinner2016-08-26
| | | | | | | | | | | | | | | | | | | | From inspection, the superblock sb_inprogress check is done in the verifier and triggered only for the primary superblock via a "bp->b_bn == XFS_SB_DADDR" check. Unfortunately, the primary superblock is an uncached buffer, and hence it is configured by xfs_buf_read_uncached() with: bp->b_bn = XFS_BUF_DADDR_NULL; /* always null for uncached buffers */ And so this check never triggers. Fix it. cc: <stable@vger.kernel.org> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
* xfs: simple btree query range should look right if LE lookup failsDarrick J. Wong2016-08-26
| | | | | | | | | | | | | | | If the initial LOOKUP_LE in the simple query range fails to find anything, we should attempt to increment the btree cursor to see if there actually /are/ records for what we're trying to find. Without this patch, a bnobt range query of (0, $agsize) returns no results because the leftmost record never has a startblock of zero. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
* xfs: fix some key handling problems in _btree_simple_query_rangeDarrick J. Wong2016-08-26
| | | | | | | | | | | | We only need the record's high key for the first record that we look at; for all records, we /definitely/ need the regular record key. Therefore, fix how the simple range query function gets its keys. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
* xfs: don't log the entire end of the AGFDarrick J. Wong2016-08-26
| | | | | | | | | | | | When we're logging the last non-spare field in the AGF, we don't need to log the spare fields, so plumb in a new AGF logging flag to help us avoid that. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
* xfs: disallow mounting of realtime + rmap filesystemsDarrick J. Wong2016-08-26
| | | | | | | | | | | | | Since the kernel doesn't currently support the realtime rmapbt, don't allow such filesystems to be mounted. Support will appear in a future release. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
* xfs: don't perform lookups on zero-height btreesDarrick J. Wong2016-08-26
| | | | | | | | | | | | If the caller passes in a cursor to a zero-height btree (which is impossible), we never set block to anything but NULL, which causes the later dereference of it to crash. Instead, just return -EFSCORRUPTED. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
* Merge branch 'iomap-fixes-4.8-rc3' into for-nextDave Chinner2016-08-16
|\
| * xfs: (re-)implement FIEMAP_FLAG_XATTRChristoph Hellwig2016-08-16
| | | | | | | | | | | | | | | | | | | | | | Use a special read-only iomap_ops implementation to support fiemap on the attr fork. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
| * xfs: simplify xfs_file_iomap_beginChristoph Hellwig2016-08-16
| | | | | | | | | | | | | | | | | | | | | | We'll never get nimap == 0 for a successful return from xfs_bmapi_read, so don't try to handle it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
| * iomap: mark ->iomap_end as optionalChristoph Hellwig2016-08-16
| | | | | | | | | | | | | | | | | | | | No need to implement it for read-only mappings. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
| * iomap: prepare iomap_fiemap for attribute mappingsDave Chinner2016-08-16
| | | | | | | | | | | | | | | | | | | | | | | | | | By bassing through an -ENOENT, similar to the old XFS implementation of FIEMAP_FLAG_XATTR. Signed-off-by: Dave Chinner <dchinner@redhat.com> [hch: split from a larger patch] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
| * iomap: fiemap should honor the FIEMAP_FLAG_SYNC flagDave Chinner2016-08-16
| | | | | | | | | | | | | | | | | | | | | | | | The flag is checked as supported, but then we do an unconditional sync of the file, regardless of whether the flag is set or not. Make the sync conditional on having the FIEMAP_FLAG_SYNC flag set. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
| * iomap: remove superflous pagefault_disable from iomap_write_actorChristoph Hellwig2016-08-16
| | | | | | | | | | | | | | | | | | | | | | | | iov_iter_copy_from_user_atomic disables page faults internally, no need to do it around the call. This also brings the iomap code in line with the original filemap version. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
| * iomap: remove superflous mark_page_accessed from iomap_write_actorChristoph Hellwig2016-08-16
| | | | | | | | | | | | | | | | | | | | | | | | This catches up with commit 2457ae ("mm: non-atomically mark page accessed during page cache allocation where possible"), which moved the initial access marking into the pagecache allocator. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
* | xfs: remove OWN_AG rmap when allocating a block from the AGFLDarrick J. Wong2016-08-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we're really tight on space, xfs_alloc_ag_vextent_small() can allocate a block from the AGFL and give it to the caller. Since the caller is never the AGFL-fixing method, we must remove the OWN_AG reverse mapping because it will clash with whatever rmap the caller wants to set up. This bug was discovered by running generic/299 repeatedly. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
* | xfs: store rmapbt block count in the AGFDarrick J. Wong2016-08-16
| | | | | | | | | | | | | | | | | | | | | | | | Track the number of blocks used for the rmapbt in the AGF. When we get to the AG reservation code we need this counter to quickly make our reservation during mount. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
* | xfs: don't invalidate whole file on DAX read/writeDave Chinner2016-08-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we do DAX IO, we try to invalidate the entire page cache held on the file. This is incorrect as it will trash the entire mapping tree that now tracks dirty state in exceptional entries in the radix tree slots. What we are trying to do is remove cached pages (e.g from reads into holes) that sit in the radix tree over the range we are about to write to. Hence we should just limit the invalidation to the range we are about to overwrite. Reported-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
* | xfs: fix bogus space reservation in xfs_iomap_write_allocateChristoph Hellwig2016-08-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The space reservations was without an explaination in commit "Add error reporting calls in error paths that return EFSCORRUPTED" back in 2003. There is no reason to reserve disk blocks in the transaction when allocating blocks for delalloc space as we already reserved the space when creating the delalloc extent. With this fix we stop running out of the reserved pool in generic/229, which has happened for long time with small blocksize file systems, and has increased in severity with the new buffered write path. [ dchinner: we still need to pass the block reservation into xfs_bmapi_write() to ensure we don't deadlock during AG selection. See commit dbd5c8c ("xfs: pass total block res. as total xfs_bmapi_write() parameter") for more details on why this is necessary. ] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
* | xfs: don't assert fail on non-async buffers on ioacct decrementBrian Foster2016-08-16
|/ | | | | | | | | | | | | | | | | | | | | | | | | The buffer I/O accounting mechanism tracks async buffers under I/O. As an optimization, the buffer I/O count is incremented only once on the first async I/O for a given hold cycle of a buffer and decremented once the buffer is released to the LRU (or freed). xfs_buf_ioacct_dec() has an ASSERT() check for an XBF_ASYNC buffer, but we have one or two corner cases where a buffer can be submitted for I/O multiple times via different methods in a single hold cycle. If an async I/O occurs first, the I/O count is incremented. If a sync I/O occurs before the hold count drops, XBF_ASYNC is cleared by the time the I/O count is decremented. Remove the async assert check from xfs_buf_ioacct_dec() as this is a perfectly valid scenario. For the purposes of I/O accounting, we really only care about the buffer async state at I/O submission time. Discovered-and-analyzed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
* Linux 4.8-rc2Linus Torvalds2016-08-14
|
* Merge branch 'next' of ↵Linus Torvalds2016-08-14
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal updates from Zhang Rui: - Fix a race condition when updating cooling device, which may lead to a situation where a thermal governor never updates the cooling device. From Michele Di Giorgio. - Fix a zero division error when disabling the forced idle injection from the intel powerclamp. From Petr Mladek. - Add suspend/resume callback for intel_pch_thermal thermal driver. From Srinivas Pandruvada. - Another two fixes for clocking cooling driver and hwmon sysfs I/F. From Michele Di Giorgio and Kuninori Morimoto. [ Hmm. That suspend/resume callback for intel_pch_thermal doesn't look like a fix, but I'm letting it slide.. - Linus ] * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: clock_cooling: Fix missing mutex_init() thermal: hwmon: EXPORT_SYMBOL_GPL for thermal hwmon sysfs thermal: fix race condition when updating cooling device thermal/powerclamp: Prevent division by zero when counting interval thermal: intel_pch_thermal: Add suspend/resume callback
| * Merge branches 'thermal-intel' and 'thermal-core' into nextZhang Rui2016-08-07
| |\
| | * thermal: clock_cooling: Fix missing mutex_init()Wei Yongjun2016-08-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver allocates the mutex but not initialize it. Use mutex_init() on it to initialize it correctly. This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
| | * thermal: hwmon: EXPORT_SYMBOL_GPL for thermal hwmon sysfsKuninori Morimoto2016-08-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | thermal_add_hwmon_sysfs()/thermal_remove_hwmon_sysfs() need EXPORT_SYMBOL_GPL(). Otherwise we will have ERROR >> ERROR: "thermal_remove_hwmon_sysfs" [drivers/thermal/rcar_thermal.ko] undefined! >> ERROR: "thermal_add_hwmon_sysfs" [drivers/thermal/rcar_thermal.ko] undefined! Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
| | * thermal: fix race condition when updating cooling deviceMichele Di Giorgio2016-08-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When multiple thermal zones are bound to the same cooling device, multiple kernel threads may want to update the cooling device state by calling thermal_cdev_update(). Having cdev not protected by a mutex can lead to a race condition. Consider the following situation with two kernel threads k1 and k2: Thread k1 Thread k2 || || call thermal_cdev_update() || ... || set_cur_state(cdev, target); call power_actor_set_power() || ... || instance->target = state; || cdev->updated = false; || || cdev->updated = true; || // completes execution call thermal_cdev_update() || // cdev->updated == true || return; || \/ time k2 has already looped through the thermal instances looking for the deepest cooling device state and is preempted right before setting cdev->updated to true. Now, k1 runs, modifies the thermal instance state and sets cdev->updated to false. Then, k1 is preempted and k2 continues the execution by setting cdev->updated to true, therefore preventing k1 from performing the update. Notice that this is not an issue if k2 looks at the instance->target modified by k1 "after" it is assigned by k1. In fact, in this case the update will happen anyway and k1 can safely return immediately from thermal_cdev_update(). This may lead to a situation where a thermal governor never updates the cooling device. For example, this is the case for the step_wise governor: when calling the function thermal_zone_trip_update(), the governor may always get a new state equal to the old one (which, however, wasn't notified to the cooling device) and will therefore skip the update. CC: Zhang Rui <rui.zhang@intel.com> CC: Eduardo Valentin <edubezval@gmail.com> CC: Peter Feuerer <peter@piie.net> Reported-by: Toby Huang <toby.huang@arm.com> Signed-off-by: Michele Di Giorgio <michele.digiorgio@arm.com> Reviewed-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
| * | thermal/powerclamp: Prevent division by zero when counting intervalPetr Mladek2016-08-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I have got a zero division error when disabling the forced idle injection from the intel powerclamp. I did echo 0 >/sys/class/thermal/cooling_device48/cur_state and got [ 986.072632] divide error: 0000 [#1] PREEMPT SMP [ 986.078989] Modules linked in: [ 986.083618] CPU: 17 PID: 24967 Comm: kidle_inject/17 Not tainted 4.7.0-1-default+ #3055 [ 986.093781] Hardware name: Intel Corporation S2600CP/S2600CP, BIOS RMLSDP.86I.R3.27.D685.1305151734 05/15/2013 [ 986.106227] task: ffff880430e1c080 task.stack: ffff880427ef0000 [ 986.114122] RIP: 0010:[<ffffffff81794859>] [<ffffffff81794859>] clamp_thread+0x1d9/0x600 [ 986.124609] RSP: 0018:ffff880427ef3e20 EFLAGS: 00010246 [ 986.131860] RAX: 0000000000000258 RBX: 0000000000000006 RCX: 0000000000000001 [ 986.141179] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000018 [ 986.150478] RBP: ffff880427ef3ec8 R08: ffff880427ef0000 R09: 0000000000000002 [ 986.159779] R10: 0000000000003df2 R11: 0000000000000018 R12: 0000000000000002 [ 986.169089] R13: 0000000000000000 R14: ffff880427ef0000 R15: ffff880427ef0000 [ 986.178388] FS: 0000000000000000(0000) GS:ffff880435940000(0000) knlGS:0000000000000000 [ 986.188785] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 986.196559] CR2: 00007f1d0caf0000 CR3: 0000000002006000 CR4: 00000000001406e0 [ 986.205909] Stack: [ 986.209524] ffff8802be897b00 ffff880430e1c080 0000000000000011 0000006a35959780 [ 986.219236] 0000000000000011 ffff880427ef0008 0000000000000000 ffff8804359503d0 [ 986.228966] 0000000100029d93 ffffffff81794140 0000000000000000 ffffffff05000011 [ 986.238686] Call Trace: [ 986.242825] [<ffffffff81794140>] ? pkg_state_counter+0x80/0x80 [ 986.250866] [<ffffffff81794680>] ? powerclamp_set_cur_state+0x180/0x180 [ 986.259797] [<ffffffff8111d1a9>] kthread+0xc9/0xe0 [ 986.266682] [<ffffffff8193d69f>] ret_from_fork+0x1f/0x40 [ 986.274142] [<ffffffff8111d0e0>] ? kthread_create_on_node+0x180/0x180 [ 986.282869] Code: d1 ea 48 89 d6 80 3d 6a d0 d4 00 00 ba 64 00 00 00 89 d8 41 0f 45 f5 0f af c2 42 8d 14 2e be 31 00 00 00 83 fa 31 0f 42 f2 31 d2 <f7> f6 48 8b 15 9e 07 87 00 48 8b 3d 97 07 87 00 48 63 f0 83 e8 [ 986.307806] RIP [<ffffffff81794859>] clamp_thread+0x1d9/0x600 [ 986.315871] RSP <ffff880427ef3e20> RIP points to the following lines: compensation = get_compensation(target_ratio); interval = duration_jiffies*100/(target_ratio+compensation); A solution would be to switch the following two commands in powerclamp_set_cur_state(): set_target_ratio = 0; end_power_clamp(); But I think that the zero division might happen also when target_ratio is non-zero because the compensation might be negative. Therefore we also check the sum of target_ratio and compensation explicitly. Also the compensated_ratio variable is always set. Therefore there is no need to initialize it. Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
| * | thermal: intel_pch_thermal: Add suspend/resume callbackSrinivas Pandruvada2016-08-07
| |/ | | | | | | | | | | | | | | | | Added suspend/resume callback to disable/enable PCH thermal sensor respectively. If the sensor is enabled by the BIOS, then the sensor status will not be changed during suspend/resume. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
* | Merge branch 'for-linus' of ↵Linus Torvalds2016-08-14
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu fix from Greg Ungerer: "This contains only a single fix for a register corruption problem on certain types of m68k flat format binaries" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: fix user a5 register being overwritten
| * | m68knommu: fix user a5 register being overwrittenGreg Ungerer2016-08-07
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On no-MMU systems the application a5 register can be overwitten with the address of the process data segment when processing application signals. For flat format applications compiled with full absolute relocation this effectively corrupts the a5 register on signal processing - and this very quickly leads to process crash and often takes out the whole system with a panic as well. This has no effect on flat format applications compiled with the more common PIC methods (such as -msep-data). These format applications reserve a5 for the pointer to the data segment anyway - so it doesn't change it. A long time ago the a5 register was used in the code packed into the user stack to enable signal return processing. And so it had to be restored on end of signal cleanup processing back to the original a5 user value. This was historically done by saving away a5 in the sigcontext structure. At some point (a long time back it seems) the a5 restore process was changed and it was hard coded to put the user data segment address directly into a5. Which is ok for the common PIC compiled application case, but breaks the full relocation application code. We no longer use this type of signal handling mechanism and so we don't need to do anything special to save and restore a5 at all now. So remove the code that hard codes a5 to the address of the user data segment. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
* | Merge tag 'fixes-for-linus-4.8' of ↵Linus Torvalds2016-08-13
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull h8300 and unicore32 architecture fixes from Guenter Roeck: "Two patches to fix h8300 and unicore32 builds. unicore32 builds have been broken since v4.6. The fix has been available in -next since March of this year. h8300 builds have been broken since the last commit window. The fix has been available in -next since June of this year" * tag 'fixes-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: h8300: Add missing include file to asm/io.h unicore32: mm: Add missing parameter to arch_vma_access_permitted
| * | h8300: Add missing include file to asm/io.hGuenter Roeck2016-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | h8300 builds fail with arch/h8300/include/asm/io.h:9:15: error: unknown type name ‘u8’ arch/h8300/include/asm/io.h:15:15: error: unknown type name ‘u16’ arch/h8300/include/asm/io.h:21:15: error: unknown type name ‘u32’ and many related errors. Fixes: 23c82d41bdf4 ("kexec-allow-architectures-to-override-boot-mapping-fix") Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
| * | unicore32: mm: Add missing parameter to arch_vma_access_permittedGuenter Roeck2016-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | unicore32 fails to compile with the following errors. mm/memory.c: In function ‘__handle_mm_fault’: mm/memory.c:3381: error: too many arguments to function ‘arch_vma_access_permitted’ mm/gup.c: In function ‘check_vma_flags’: mm/gup.c:456: error: too many arguments to function ‘arch_vma_access_permitted’ mm/gup.c: In function ‘vma_permits_fault’: mm/gup.c:640: error: too many arguments to function ‘arch_vma_access_permitted’ Fixes: d61172b4b695b ("mm/core, x86/mm/pkeys: Differentiate instruction fetches") Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
* | | Merge tag 'arm64-fixes' of ↵Linus Torvalds2016-08-13
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - support for nr_cpus= command line argument (maxcpus was previously changed to allow secondary CPUs to be hot-plugged) - ARM PMU interrupt handling fix - fix potential TLB conflict in the hibernate code - improved handling of EL1 instruction aborts (better error reporting) - removal of useless jprobes code for stack saving/restoring - defconfig updates * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: defconfig: enable CONFIG_LOCALVERSION_AUTO arm64: defconfig: add options for virtualization and containers arm64: hibernate: handle allocation failures arm64: hibernate: avoid potential TLB conflict arm64: Handle el1 synchronous instruction aborts cleanly arm64: Remove stack duplicating code from jprobes drivers/perf: arm-pmu: Fix handling of SPI lacking "interrupt-affinity" property drivers/perf: arm-pmu: convert arm_pmu_mutex to spinlock arm64: Support hard limit of cpu count by nr_cpus
| * | | arm64: defconfig: enable CONFIG_LOCALVERSION_AUTOMasahiro Yamada2016-08-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When CONFIG_LOCALVERSION_AUTO is disabled, the version string is just a tag name (or with a '+' appended if HEAD is not a tagged commit). During the development (and especially when git-bisecting), longer version string would be helpful to identify the commit we are running. This is a default y option, so drop the unset to enable it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * | | arm64: defconfig: add options for virtualization and containersRiku Voipio2016-08-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable options commonly needed by popular virtualization and container applications. Use modules when possible to avoid too much overhead for users not interested. - add namespace and cgroup options needed - add seccomp - optional, but enhances Qemu etc - bridge, nat, veth, macvtap and multicast for routing guests and containers - btfrs and overlayfs modules for container COW backends - while near it, make fuse a module instead of built-in. Generated with make saveconfig and dropping unrelated spurious change hunks while commiting. bloat-o-meter old-vmlinux vmlinux: add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652) .... Total: Before=10515408, After=10604060, chg +0.84% Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * | | arm64: hibernate: handle allocation failuresMark Rutland2016-08-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In create_safe_exec_page(), we create a copy of the hibernate exit text, along with some page tables to map this via TTBR0. We then install the new tables in TTBR0. In swsusp_arch_resume() we call create_safe_exec_page() before trying a number of operations which may fail (e.g. copying the linear map page tables). If these fail, we bail out of swsusp_arch_resume() and return an error code, but leave TTBR0 as-is. Subsequently, the core hibernate code will call free_basic_memory_bitmaps(), which will free all of the memory allocations we made, including the page tables installed in TTBR0. Thus, we may have TTBR0 pointing at dangling freed memory for some period of time. If the hibernate attempt was triggered by a user requesting a hibernate test via the reboot syscall, we may return to userspace with the clobbered TTBR0 value. Avoid these issues by reorganising swsusp_arch_resume() such that we have no failure paths after create_safe_exec_page(). We also add a check that the zero page allocation succeeded, matching what we have for other allocations. Fixes: 82869ac57b5d ("arm64: kernel: Add support for hibernate/suspend-to-disk") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: James Morse <james.morse@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: <stable@vger.kernel.org> # 4.7+ Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * | | arm64: hibernate: avoid potential TLB conflictMark Rutland2016-08-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In create_safe_exec_page we install a set of global mappings in TTBR0, then subsequently invalidate TLBs. While TTBR0 points at the zero page, and the TLBs should be free of stale global entries, we may have stale ASID-tagged entries (e.g. from the EFI runtime services mappings) for the same VAs. Per the ARM ARM these ASID-tagged entries may conflict with newly-allocated global entries, and we must follow a Break-Before-Make approach to avoid issues resulting from this. This patch reworks create_safe_exec_page to invalidate TLBs while the zero page is still in place, ensuring that there are no potential conflicts when the new TTBR0 value is installed. As a single CPU is online while this code executes, we do not need to perform broadcast TLB maintenance, and can call local_flush_tlb_all(), which also subsumes some barriers. The remaining assembly is converted to use write_sysreg() and isb(). Other than this, we safely manipulate TTBRs in the hibernate dance. The code we install as part of the new TTBR0 mapping (the hibernated kernel's swsusp_arch_suspend_exit) installs a zero page into TTBR1, invalidates TLBs, then installs its preferred value. Upon being restored to the middle of swsusp_arch_suspend, the new image will call __cpu_suspend_exit, which will call cpu_uninstall_idmap, installing the zero page in TTBR0 and invalidating all TLB entries. Fixes: 82869ac57b5d ("arm64: kernel: Add support for hibernate/suspend-to-disk") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: James Morse <james.morse@arm.com> Tested-by: James Morse <james.morse@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: <stable@vger.kernel.org> # 4.7+ Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * | | arm64: Handle el1 synchronous instruction aborts cleanlyLaura Abbott2016-08-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Executing from a non-executable area gives an ugly message: lkdtm: Performing direct entry EXEC_RODATA lkdtm: attempting ok execution at ffff0000084c0e08 lkdtm: attempting bad execution at ffff000008880700 Bad mode in Synchronous Abort handler detected on CPU2, code 0x8400000e -- IABT (current EL) CPU: 2 PID: 998 Comm: sh Not tainted 4.7.0-rc2+ #13 Hardware name: linux,dummy-virt (DT) task: ffff800077e35780 ti: ffff800077970000 task.ti: ffff800077970000 PC is at lkdtm_rodata_do_nothing+0x0/0x8 LR is at execute_location+0x74/0x88 The 'IABT (current EL)' indicates the error but it's a bit cryptic without knowledge of the ARM ARM. There is also no indication of the specific address which triggered the fault. The increase in kernel page permissions makes hitting this case more likely as well. Handling the case in the vectors gives a much more familiar looking error message: lkdtm: Performing direct entry EXEC_RODATA lkdtm: attempting ok execution at ffff0000084c0840 lkdtm: attempting bad execution at ffff000008880680 Unable to handle kernel paging request at virtual address ffff000008880680 pgd = ffff8000089b2000 [ffff000008880680] *pgd=00000000489b4003, *pud=0000000048904003, *pmd=0000000000000000 Internal error: Oops: 8400000e [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 997 Comm: sh Not tainted 4.7.0-rc1+ #24 Hardware name: linux,dummy-virt (DT) task: ffff800077f9f080 ti: ffff800008a1c000 task.ti: ffff800008a1c000 PC is at lkdtm_rodata_do_nothing+0x0/0x8 LR is at execute_location+0x74/0x88 Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * | | arm64: Remove stack duplicating code from jprobesDavid A. Long2016-08-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because the arm64 calling standard allows stacked function arguments to be anywhere in the stack frame, do not attempt to duplicate the stack frame for jprobes handler functions. Documentation changes to describe this issue have been broken out into a separate patch in order to simultaneously address them in other architecture(s). Signed-off-by: David A. Long <dave.long@linaro.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * | | drivers/perf: arm-pmu: Fix handling of SPI lacking "interrupt-affinity" propertyMarc Zyngier2016-08-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch 19a469a58720 ("drivers/perf: arm-pmu: Handle per-interrupt affinity mask") added support for partitionned PPI setups, but inadvertently broke setups using SPIs without the "interrupt-affinity" property (which is the case for UP platforms). This patch restore the broken functionnality by testing whether the interrupt is percpu or not instead of relying on the using_spi flag that really means "SPI *and* interrupt-affinity property". Acked-by: Mark Rutland <mark.rutland@arm.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: 19a469a58720 ("drivers/perf: arm-pmu: Handle per-interrupt affinity mask") Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
| * | | drivers/perf: arm-pmu: convert arm_pmu_mutex to spinlockSudeep Holla2016-08-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arm_pmu_mutex is never held long and we don't want to sleep while the lock is being held as it's executed in the context of hotplug notifiers. So it can be converted to a simple spinlock instead. Without this patch we get the following warning: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 in_atomic(): 1, irqs_disabled(): 128, pid: 0, name: swapper/2 no locks held by swapper/2/0. irq event stamp: 381314 hardirqs last enabled at (381313): _raw_spin_unlock_irqrestore+0x7c/0x88 hardirqs last disabled at (381314): cpu_die+0x28/0x48 softirqs last enabled at (381294): _local_bh_enable+0x28/0x50 softirqs last disabled at (381293): irq_enter+0x58/0x78 CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.7.0 #12 Call trace: dump_backtrace+0x0/0x220 show_stack+0x24/0x30 dump_stack+0xb4/0xf0 ___might_sleep+0x1d8/0x1f0 __might_sleep+0x5c/0x98 mutex_lock_nested+0x54/0x400 arm_perf_starting_cpu+0x34/0xb0 cpuhp_invoke_callback+0x88/0x3d8 notify_cpu_starting+0x78/0x98 secondary_start_kernel+0x108/0x1a8 This patch converts the mutex to spinlock to eliminate the above warnings. This constraints pmu->reset to be non-blocking call which is the case with all the ARM PMU backends. Cc: Stephen Boyd <sboyd@codeaurora.org> Fixes: 37b502f121ad ("arm/perf: Fix hotplug state machine conversion") Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
generated by cgit v1.2.2 (git 2.25.0) at 2025-08-29 08:32:08 -0400