94 files changed, 410 insertions, 204 deletions
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
index 0d35ab64641c..7106114c7464 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -74,6 +74,7 @@
        audio_codec: tlv320aic3106@1b {
                compatible = "ti,tlv320aic3106";
                reg = <0x1b>;
+                ai3x-micbias-vg = <0x2>;
        };
        accel: lis331dlh@1d {
@@ -153,7 +154,7 @@
        ti,audio-routing =
                "Headphone Jack",       "HPLOUT",
                "Headphone Jack",       "HPROUT",
-                "LINE1L",               "Line In";
+                "MIC3L",                "Mic3L Switch";
 };
 &mcasp0 {
@@ -438,41 +439,50 @@
        regulators {
                dcdc1_reg: regulator@0 {
                        /* VDD_1V8 system supply */
+                        regulator-always-on;
                };
                dcdc2_reg: regulator@1 {
                        /* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
                        regulator-name = "vdd_core";
                        regulator-min-microvolt = <925000>;
-                        regulator-max-microvolt = <1325000>;
+                        regulator-max-microvolt = <1150000>;
                        regulator-boot-on;
+                        regulator-always-on;
                };
                dcdc3_reg: regulator@2 {
                        /* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
                        regulator-name = "vdd_mpu";
                        regulator-min-microvolt = <925000>;
-                        regulator-max-microvolt = <1150000>;
+                        regulator-max-microvolt = <1325000>;
                        regulator-boot-on;
+                        regulator-always-on;
                };
                ldo1_reg: regulator@3 {
                        /* VRTC 1.8V always-on supply */
+                        regulator-name = "vrtc,vdds";
                        regulator-always-on;
                };
                ldo2_reg: regulator@4 {
                        /* 3.3V rail */
+                        regulator-name = "vdd_3v3aux";
+                        regulator-always-on;
                };
                ldo3_reg: regulator@5 {
                        /* VDD_3V3A 3.3V rail */
+                        regulator-name = "vdd_3v3a";
                        regulator-min-microvolt = <3300000>;
                        regulator-max-microvolt = <3300000>;
                };
                ldo4_reg: regulator@6 {
                        /* VDD_3V3B 3.3V rail */
+                        regulator-name = "vdd_3v3b";
+                        regulator-always-on;
                };
        };
 };
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 21fcc440fc1a..b76f9a2ce05d 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -210,7 +210,7 @@
                };
                uart0: serial@44e09000 {
-                        compatible = "ti,omap3-uart";
+                        compatible = "ti,am3352-uart", "ti,omap3-uart";
                        ti,hwmods = "uart1";
                        clock-frequency = <48000000>;
                        reg = <0x44e09000 0x2000>;
@@ -221,7 +221,7 @@
                };
                uart1: serial@48022000 {
-                        compatible = "ti,omap3-uart";
+                        compatible = "ti,am3352-uart", "ti,omap3-uart";
                        ti,hwmods = "uart2";
                        clock-frequency = <48000000>;
                        reg = <0x48022000 0x2000>;
@@ -232,7 +232,7 @@
                };
                uart2: serial@48024000 {
-                        compatible = "ti,omap3-uart";
+                        compatible = "ti,am3352-uart", "ti,omap3-uart";
                        ti,hwmods = "uart3";
                        clock-frequency = <48000000>;
                        reg = <0x48024000 0x2000>;
@@ -243,7 +243,7 @@
                };
                uart3: serial@481a6000 {
-                        compatible = "ti,omap3-uart";
+                        compatible = "ti,am3352-uart", "ti,omap3-uart";
                        ti,hwmods = "uart4";
                        clock-frequency = <48000000>;
                        reg = <0x481a6000 0x2000>;
@@ -252,7 +252,7 @@
                };
                uart4: serial@481a8000 {
-                        compatible = "ti,omap3-uart";
+                        compatible = "ti,am3352-uart", "ti,omap3-uart";
                        ti,hwmods = "uart5";
                        clock-frequency = <48000000>;
                        reg = <0x481a8000 0x2000>;
@@ -261,7 +261,7 @@
                };
                uart5: serial@481aa000 {
-                        compatible = "ti,omap3-uart";
+                        compatible = "ti,am3352-uart", "ti,omap3-uart";
                        ti,hwmods = "uart6";
                        clock-frequency = <48000000>;
                        reg = <0x481aa000 0x2000>;
diff --git a/arch/arm/boot/dts/cros-ec-keyboard.dtsi b/arch/arm/boot/dts/cros-ec-keyboard.dtsi
index 9c7fb0acae79..4e42f30cb318 100644
--- a/arch/arm/boot/dts/cros-ec-keyboard.dtsi
+++ b/arch/arm/boot/dts/cros-ec-keyboard.dtsi
@@ -22,6 +22,7 @@
                        MATRIX_KEY(0x00, 0x02, KEY_F1)
                        MATRIX_KEY(0x00, 0x03, KEY_B)
                        MATRIX_KEY(0x00, 0x04, KEY_F10)
+                        MATRIX_KEY(0x00, 0x05, KEY_RO)
                        MATRIX_KEY(0x00, 0x06, KEY_N)
                        MATRIX_KEY(0x00, 0x08, KEY_EQUAL)
                        MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
@@ -34,6 +35,7 @@
                        MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)
                        MATRIX_KEY(0x01, 0x09, KEY_F9)
                        MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)
+                        MATRIX_KEY(0x01, 0x0c, KEY_HENKAN)
                        MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL)
                        MATRIX_KEY(0x02, 0x01, KEY_TAB)
@@ -45,6 +47,7 @@
                        MATRIX_KEY(0x02, 0x07, KEY_102ND)
                        MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)
                        MATRIX_KEY(0x02, 0x09, KEY_F8)
+                        MATRIX_KEY(0x02, 0x0a, KEY_YEN)
                        MATRIX_KEY(0x03, 0x01, KEY_GRAVE)
                        MATRIX_KEY(0x03, 0x02, KEY_F2)
@@ -53,6 +56,7 @@
                        MATRIX_KEY(0x03, 0x06, KEY_6)
                        MATRIX_KEY(0x03, 0x08, KEY_MINUS)
                        MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
+                        MATRIX_KEY(0x03, 0x0c, KEY_MUHENKAN)
                        MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
                        MATRIX_KEY(0x04, 0x01, KEY_A)
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index aa465904f6cc..096f68be99e2 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -686,7 +686,8 @@
 &dcan1 {
        status = "ok";
-        pinctrl-names = "default", "sleep";
+        pinctrl-names = "default", "sleep", "active";
-        pinctrl-0 = <&dcan1_pins_default>;
+        pinctrl-0 = <&dcan1_pins_sleep>;
        pinctrl-1 = <&dcan1_pins_sleep>;
+        pinctrl-2 = <&dcan1_pins_default>;
 };
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 37202b41351b..b058b3146874 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -116,7 +116,7 @@
                                ranges = <0 0x2000 0x2000>;
                                scm_conf: scm_conf@0 {
-                                        compatible = "syscon";
+                                        compatible = "syscon", "simple-bus";
                                        reg = <0x0 0x1400>;
                                        #address-cells = <1>;
                                        #size-cells = <1>;
@@ -397,7 +397,7 @@
                };
                uart1: serial@4806a000 {
-                        compatible = "ti,omap4-uart";
+                        compatible = "ti,dra742-uart", "ti,omap4-uart";
                        reg = <0x4806a000 0x100>;
                        interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "uart1";
@@ -408,7 +408,7 @@
                };
                uart2: serial@4806c000 {
-                        compatible = "ti,omap4-uart";
+                        compatible = "ti,dra742-uart", "ti,omap4-uart";
                        reg = <0x4806c000 0x100>;
                        interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "uart2";
@@ -419,7 +419,7 @@
                };
                uart3: serial@48020000 {
-                        compatible = "ti,omap4-uart";
+                        compatible = "ti,dra742-uart", "ti,omap4-uart";
                        reg = <0x48020000 0x100>;
                        interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "uart3";
@@ -430,7 +430,7 @@
                };
                uart4: serial@4806e000 {
-                        compatible = "ti,omap4-uart";
+                        compatible = "ti,dra742-uart", "ti,omap4-uart";
                        reg = <0x4806e000 0x100>;
                        interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "uart4";
@@ -441,7 +441,7 @@
                };
                uart5: serial@48066000 {
-                        compatible = "ti,omap4-uart";
+                        compatible = "ti,dra742-uart", "ti,omap4-uart";
                        reg = <0x48066000 0x100>;
                        interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "uart5";
@@ -452,7 +452,7 @@
                };
                uart6: serial@48068000 {
-                        compatible = "ti,omap4-uart";
+                        compatible = "ti,dra742-uart", "ti,omap4-uart";
                        reg = <0x48068000 0x100>;
                        interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "uart6";
@@ -463,7 +463,7 @@
                };
                uart7: serial@48420000 {
-                        compatible = "ti,omap4-uart";
+                        compatible = "ti,dra742-uart", "ti,omap4-uart";
                        reg = <0x48420000 0x100>;
                        interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "uart7";
@@ -472,7 +472,7 @@
                };
                uart8: serial@48422000 {
-                        compatible = "ti,omap4-uart";
+                        compatible = "ti,dra742-uart", "ti,omap4-uart";
                        reg = <0x48422000 0x100>;
                        interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "uart8";
@@ -481,7 +481,7 @@
                };
                uart9: serial@48424000 {
-                        compatible = "ti,omap4-uart";
+                        compatible = "ti,dra742-uart", "ti,omap4-uart";
                        reg = <0x48424000 0x100>;
                        interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "uart9";
@@ -490,7 +490,7 @@
                };
                uart10: serial@4ae2b000 {
-                        compatible = "ti,omap4-uart";
+                        compatible = "ti,dra742-uart", "ti,omap4-uart";
                        reg = <0x4ae2b000 0x100>;
                        interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "uart10";
@@ -1140,6 +1140,7 @@
                                ctrl-module = <&omap_control_sata>;
                                clocks = <&sys_clkin1>, <&sata_ref_clk>;
                                clock-names = "sysclk", "refclk";
+                                syscon-pllreset = <&scm_conf 0x3fc>;
                                #phy-cells = <0>;
                        };
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index 4e1b60581782..803738414086 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -587,9 +587,10 @@
 &dcan1 {
        status = "ok";
-        pinctrl-names = "default", "sleep";
+        pinctrl-names = "default", "sleep", "active";
-        pinctrl-0 = <&dcan1_pins_default>;
+        pinctrl-0 = <&dcan1_pins_sleep>;
        pinctrl-1 = <&dcan1_pins_sleep>;
+        pinctrl-2 = <&dcan1_pins_default>;
 };
 &qspi {
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index d7201333e3bc..2db99433e17f 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -138,8 +138,8 @@
                mipi_phy: video-phy@10020710 {
                        compatible = "samsung,s5pv210-mipi-video-phy";
-                        reg = <0x10020710 8>;
                        #phy-cells = <1>;
+                        syscon = <&pmu_system_controller>;
                };
                pd_cam: cam-power-domain@10023C00 {
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index e0abfc3324d1..e050d85cdacd 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -127,6 +127,10 @@
        };
 };
+&cpu0 {
+        cpu0-supply = <&buck1_reg>;
+};
 &fimd {
        pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>;
        pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 98f3ce65cb9a..ba34886f8b65 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -188,6 +188,10 @@
        };
 };
+&cpu0 {
+        cpu0-supply = <&varm_breg>;
+};
 &dsi_0 {
        vddcore-supply = <&vusb_reg>;
        vddio-supply = <&vmipi_reg>;
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index d4f2b11319dd..775892b2cc6a 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -548,6 +548,10 @@
        };
 };
+&cpu0 {
+        cpu0-supply = <&vdd_arm_reg>;
+};
 &pinctrl_1 {
        hdmi_hpd: hdmi-hpd {
                samsung,pins = "gpx3-7";
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 10d3c173396e..3e5ba665d200 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -40,6 +40,18 @@
                        device_type = "cpu";
                        compatible = "arm,cortex-a9";
                        reg = <0x900>;
+                        clocks = <&clock CLK_ARM_CLK>;
+                        clock-names = "cpu";
+                        clock-latency = <160000>;
+                        operating-points = <
+                                1200000 1250000
+                                1000000 1150000
+                                800000  1075000
+                                500000  975000
+                                400000  975000
+                                200000  950000
+                        >;
                        cooling-min-level = <4>;
                        cooling-max-level = <2>;
                        #cooling-cells = <2>; /* min followed by max */
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index c892d58e8dad..b995333ea22b 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -468,6 +468,7 @@
                                interrupts = <36 37 38 39 40 41 42 43 44>;
                                status = "disabled";
                                clocks = <&clks 26>;
+                                #io-channel-cells = <1>;
                        };
                        spdif@80054000 {
diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts
index dd45e6971bc3..9351296356dc 100644
--- a/arch/arm/boot/dts/imx25-pdk.dts
+++ b/arch/arm/boot/dts/imx25-pdk.dts
@@ -10,6 +10,7 @@
 */
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include "imx25.dtsi"
@@ -114,8 +115,8 @@
 &esdhc1 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_esdhc1>;
-        cd-gpios = <&gpio2 1 0>;
+        cd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-        wp-gpios = <&gpio2 0 0>;
+        wp-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
        status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index bc215e4b75fd..b69be5c499cf 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -108,7 +108,7 @@
                        };
                        gpt1: timer@10003000 {
-                                compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+                                compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
                                reg = <0x10003000 0x1000>;
                                interrupts = <26>;
                                clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
@@ -117,7 +117,7 @@
                        };
                        gpt2: timer@10004000 {
-                                compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+                                compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
                                reg = <0x10004000 0x1000>;
                                interrupts = <25>;
                                clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>,
@@ -126,7 +126,7 @@
                        };
                        gpt3: timer@10005000 {
-                                compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+                                compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
                                reg = <0x10005000 0x1000>;
                                interrupts = <24>;
                                clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>,
@@ -376,7 +376,7 @@
                        };
                        gpt4: timer@10019000 {
-                                compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+                                compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
                                reg = <0x10019000 0x1000>;
                                interrupts = <4>;
                                clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>,
@@ -385,7 +385,7 @@
                        };
                        gpt5: timer@1001a000 {
-                                compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+                                compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
                                reg = <0x1001a000 0x1000>;
                                interrupts = <3>;
                                clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>,
@@ -436,7 +436,7 @@
                        };
                        gpt6: timer@1001f000 {
-                                compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+                                compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
                                reg = <0x1001f000 0x1000>;
                                interrupts = <2>;
                                clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>,
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index b6478e97d6a7..e6540b5cfa4c 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -286,8 +286,8 @@
                        can1: can@53fe4000 {
                                compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
                                reg = <0x53fe4000 0x1000>;
-                                clocks = <&clks 33>;
+                                clocks = <&clks 33>, <&clks 33>;
-                                clock-names = "ipg";
+                                clock-names = "ipg", "per";
                                interrupts = <43>;
                                status = "disabled";
                        };
@@ -295,8 +295,8 @@
                        can2: can@53fe8000 {
                                compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
                                reg = <0x53fe8000 0x1000>;
-                                clocks = <&clks 34>;
+                                clocks = <&clks 34>, <&clks 34>;
-                                clock-names = "ipg";
+                                clock-names = "ipg", "per";
                                interrupts = <44>;
                                status = "disabled";
                        };
diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts
index 93d3ea12328c..0f3fe29b816e 100644
--- a/arch/arm/boot/dts/imx51-apf51dev.dts
+++ b/arch/arm/boot/dts/imx51-apf51dev.dts
@@ -98,7 +98,7 @@
 &esdhc1 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_esdhc1>;
-        cd-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+        cd-gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
        bus-width = <4>;
        status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index e9337ad52f59..3bc18835fb4b 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -103,8 +103,8 @@
 &esdhc1 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_esdhc1>;
-        cd-gpios = <&gpio1 1 0>;
+        cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-        wp-gpios = <&gpio1 9 0>;
+        wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
        status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
index d0e0f57eb432..53f40885c530 100644
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ b/arch/arm/boot/dts/imx53-m53evk.dts
@@ -124,8 +124,8 @@
 &esdhc1 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_esdhc1>;
-        cd-gpios = <&gpio1 1 0>;
+        cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-        wp-gpios = <&gpio1 9 0>;
+        wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
        status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index 181ae5ebf23f..b0d5542ac829 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -147,8 +147,8 @@
 &esdhc3 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_esdhc3>;
-        cd-gpios = <&gpio3 11 0>;
+        cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
-        wp-gpios = <&gpio3 12 0>;
+        wp-gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
        bus-width = <8>;
        status = "okay";
 };
@@ -295,9 +295,10 @@
 &tve {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_vga_sync>;
+        ddc-i2c-bus = <&i2c2>;
        fsl,tve-mode = "vga";
-        fsl,hsync-pin = <4>;
+        fsl,hsync-pin = <7>;    /* IPU DI1 PIN7 via EIM_OE */
-        fsl,vsync-pin = <6>;
+        fsl,vsync-pin = <8>;    /* IPU DI1 PIN8 via EIM_RW */
        status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index 1d325576bcc0..fc89ce1e5763 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -41,8 +41,8 @@
 &esdhc1 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_esdhc1>;
-        cd-gpios = <&gpio3 13 0>;
+        cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
-        wp-gpios = <&gpio4 11 0>;
+        wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
        status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
index 4f1f0e2868bf..e03373a58760 100644
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -41,8 +41,8 @@
        pinctrl-0 = <&pinctrl_esdhc2>,
                    <&pinctrl_esdhc2_cdwp>;
        vmmc-supply = <&reg_3p3v>;
-        wp-gpios = <&gpio1 2 0>;
+        wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-        cd-gpios = <&gpio1 4 0>;
+        cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
        status = "disabled";
 };
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index 704bd72cbfec..d3e50b22064f 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -183,7 +183,7 @@
 };
 &esdhc1 {
-        cd-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+        cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
        fsl,wp-controller;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_esdhc1>;
@@ -191,7 +191,7 @@
 };
 &esdhc2 {
-        cd-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+        cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
        fsl,wp-controller;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_esdhc2>;
diff --git a/arch/arm/boot/dts/imx53-voipac-bsb.dts b/arch/arm/boot/dts/imx53-voipac-bsb.dts
index c17d3ad6dba5..fc51b87ad208 100644
--- a/arch/arm/boot/dts/imx53-voipac-bsb.dts
+++ b/arch/arm/boot/dts/imx53-voipac-bsb.dts
@@ -119,8 +119,8 @@
 &esdhc2 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_esdhc2>;
-        cd-gpios = <&gpio3 25 0>;
+        cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-        wp-gpios = <&gpio2 19 0>;
+        wp-gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
        vmmc-supply = <&reg_3p3v>;
        status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 43cb3fd76be7..5111f5170d53 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -305,8 +305,8 @@
 &usdhc2 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc2>;
-        cd-gpios = <&gpio1 4 0>;
+        cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-        wp-gpios = <&gpio1 2 0>;
+        wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
        vmmc-supply = <&reg_3p3v>;
        status = "okay";
 };
@@ -314,8 +314,8 @@
 &usdhc3 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc3>;
-        cd-gpios = <&gpio7 0 0>;
+        cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-        wp-gpios = <&gpio7 1 0>;
+        wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
        vmmc-supply = <&reg_3p3v>;
        status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index 78df05e9d1ce..d6515f7a56c4 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -11,6 +11,7 @@
 */
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "imx6q.dtsi"
 / {
@@ -196,8 +197,8 @@
 };
 &usdhc3 {
-        cd-gpios = <&gpio6 11 0>;
+        cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
-        wp-gpios = <&gpio6 14 0>;
+        wp-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
        vmmc-supply = <&reg_3p3v>;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc3
diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts
index 703539cf36d3..00bd63e63d0c 100644
--- a/arch/arm/boot/dts/imx6q-gk802.dts
+++ b/arch/arm/boot/dts/imx6q-gk802.dts
@@ -7,6 +7,7 @@
 */
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "imx6q.dtsi"
 / {
@@ -161,7 +162,7 @@
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc3>;
        bus-width = <4>;
-        cd-gpios = <&gpio6 11 0>;
+        cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
        vmmc-supply = <&reg_3p3v>;
        status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts
index a43abfa21e33..5645d52850a7 100644
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -251,7 +251,7 @@
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc2>;
        bus-width = <4>;
-        cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+        cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
        vmmc-supply = <&reg_3p3v>;
        status = "okay";
 };
@@ -260,7 +260,7 @@
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc3>;
        bus-width = <4>;
-        cd-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+        cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
        wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
        vmmc-supply = <&reg_3p3v>;
        status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
index e6d9195a1da7..f4d6ae564ead 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
@@ -173,7 +173,7 @@
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc1>;
        vmmc-supply = <&reg_3p3v>;
-        cd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+        cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
        status = "okay";
 };
@@ -181,7 +181,7 @@
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc2>;
        vmmc-supply = <&reg_3p3v>;
-        cd-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+        cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
        status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
index 1d85de2befb3..a47a0399a172 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
@@ -392,7 +392,7 @@
 &usdhc1 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc1>;
-        cd-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+        cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
        no-1-8-v;
        status = "okay";
 };
@@ -400,7 +400,7 @@
 &usdhc2 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc2>;
-        cd-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+        cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
        wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
        no-1-8-v;
        status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
index 59e5d15e3ec4..ff41f83551de 100644
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -258,6 +258,6 @@
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>;
        vmmc-supply = <&reg_3p3v>;
-        cd-gpios = <&gpio1 4 0>;
+        cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
        status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
index 2c253d6d20bd..45e7c39e80d5 100644
--- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
@@ -1,3 +1,5 @@
+#include <dt-bindings/gpio/gpio.h>
 / {
        regulators {
                compatible = "simple-bus";
@@ -181,7 +183,7 @@
 &usdhc2 { /* module slot */
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc2>;
-        cd-gpios = <&gpio2 2 0>;
+        cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
        status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index b5756c21ea1d..4493f6e99330 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -318,7 +318,7 @@
 &usdhc3 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc3>;
-        cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+        cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
        vmmc-supply = <&reg_3p3v>;
        status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 86f03c1b147c..a857d1294609 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -324,7 +324,7 @@
 &usdhc3 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc3>;
-        cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+        cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
        vmmc-supply = <&reg_3p3v>;
        status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 4a8d97f47759..1afe3385e2d2 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -417,7 +417,7 @@
 &usdhc3 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc3>;
-        cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+        cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
        vmmc-supply = <&reg_3p3v>;
        status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
index 62a82f3eba88..6dd0b764e036 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
@@ -299,6 +299,6 @@
                &pinctrl_hummingboard_usdhc2
        >;
        vmmc-supply = <&reg_3p3v>;
-        cd-gpios = <&gpio1 4 0>;
+        cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
        status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 3af16dfe417b..d7fe6672d00c 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -453,7 +453,7 @@
 &usdhc3 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc3>;
-        cd-gpios = <&gpio7 0 0>;
+        cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
        vmmc-supply = <&reg_3p3v>;
        status = "okay";
 };
@@ -461,7 +461,7 @@
 &usdhc4 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc4>;
-        cd-gpios = <&gpio2 6 0>;
+        cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
        vmmc-supply = <&reg_3p3v>;
        status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 1ce6133b67f5..9e6ecd99b472 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -409,8 +409,8 @@
 &usdhc2 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc2>;
-        cd-gpios = <&gpio1 4 0>;
+        cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-        wp-gpios = <&gpio1 2 0>;
+        wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
        status = "disabled";
 };
@@ -418,7 +418,7 @@
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc3
                     &pinctrl_usdhc3_cdwp>;
-        cd-gpios = <&gpio1 27 0>;
+        cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-        wp-gpios = <&gpio1 29 0>;
+        wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
        status = "disabled";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
index 488a640796ac..3373fd958e95 100644
--- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi
@@ -342,7 +342,7 @@
        pinctrl-0 = <&pinctrl_usdhc2>;
        bus-width = <4>;
        cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-        wp-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+        wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
        status = "okay";
 };
@@ -351,6 +351,6 @@
        pinctrl-0 = <&pinctrl_usdhc3>;
        bus-width = <4>;
        cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-        wp-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+        wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
        status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 3b24b12651b2..e329ca5c3322 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -467,8 +467,8 @@
        pinctrl-0 = <&pinctrl_usdhc3>;
        pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
        pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-        cd-gpios = <&gpio6 15 0>;
+        cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
-        wp-gpios = <&gpio1 13 0>;
+        wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
        status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index e00c44f6a0df..782379320517 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -448,8 +448,8 @@
 &usdhc3 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc3>;
-        cd-gpios = <&gpio7 0 0>;
+        cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-        wp-gpios = <&gpio7 1 0>;
+        wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
        vmmc-supply = <&reg_3p3v>;
        status = "okay";
 };
@@ -457,7 +457,7 @@
 &usdhc4 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc4>;
-        cd-gpios = <&gpio2 6 0>;
+        cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
        vmmc-supply = <&reg_3p3v>;
        status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index a626e6dd8022..944eb81cb2b8 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -562,8 +562,8 @@
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc2>;
        bus-width = <8>;
-        cd-gpios = <&gpio2 2 0>;
+        cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-        wp-gpios = <&gpio2 3 0>;
+        wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
        status = "okay";
 };
@@ -571,8 +571,8 @@
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc3>;
        bus-width = <8>;
-        cd-gpios = <&gpio2 0 0>;
+        cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-        wp-gpios = <&gpio2 1 0>;
+        wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
        status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index f02b80b41d4f..da08de324e9e 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -680,7 +680,7 @@
        pinctrl-0 = <&pinctrl_usdhc1>;
        bus-width = <4>;
        no-1-8-v;
-        cd-gpios = <&gpio7 2 0>;
+        cd-gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
        fsl,wp-controller;
        status = "okay";
 };
@@ -690,7 +690,7 @@
        pinctrl-0 = <&pinctrl_usdhc2>;
        bus-width = <4>;
        no-1-8-v;
-        cd-gpios = <&gpio7 3 0>;
+        cd-gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
        fsl,wp-controller;
        status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index 5fb091675582..9e096d811bed 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -9,6 +9,8 @@
 *
 */
+#include <dt-bindings/gpio/gpio.h>
 / {
        regulators {
                compatible = "simple-bus";
@@ -250,13 +252,13 @@
 &usdhc1 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc1>;
-        cd-gpios = <&gpio1 2 0>;
+        cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
        status = "okay";
 };
 &usdhc3 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc3>;
-        cd-gpios = <&gpio3 9 0>;
+        cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
        status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index e6d13592080d..b57033e8c633 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -181,10 +181,10 @@
                        interrupt-names = "msi";
                        #interrupt-cells = <1>;
                        interrupt-map-mask = <0 0 0 0x7>;
-                        interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+                        interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-                                        <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+                                        <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-                                        <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+                                        <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-                                        <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+                                        <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&clks IMX6QDL_CLK_PCIE_AXI>,
                                 <&clks IMX6QDL_CLK_LVDS1_GATE>,
                                 <&clks IMX6QDL_CLK_PCIE_REF_125M>;
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index 945887d3fdb3..b84dff2e94ea 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -617,8 +617,8 @@
        pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
        pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
        bus-width = <8>;
-        cd-gpios = <&gpio4 7 0>;
+        cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
-        wp-gpios = <&gpio4 6 0>;
+        wp-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
        status = "okay";
 };
@@ -627,8 +627,8 @@
        pinctrl-0 = <&pinctrl_usdhc2>;
        pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
        pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-        cd-gpios = <&gpio5 0 0>;
+        cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-        wp-gpios = <&gpio4 29 0>;
+        wp-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
        status = "okay";
 };
@@ -637,6 +637,6 @@
        pinctrl-0 = <&pinctrl_usdhc3>;
        pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
        pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-        cd-gpios = <&gpio3 22 0>;
+        cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
        status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
index e3c0b63c2205..115f3fd78971 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -49,7 +49,7 @@
        pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
        pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
        bus-width = <8>;
-        cd-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+        cd-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
        wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
        keep-power-in-suspend;
        enable-sdio-wakeup;
@@ -61,7 +61,7 @@
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc4>;
        bus-width = <8>;
-        cd-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+        cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
        no-1-8-v;
        keep-power-in-suspend;
        enable-sdio-wakup;
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index cef04cef3a80..ac88c3467078 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -293,7 +293,7 @@
        pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
        pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
        bus-width = <8>;
-        cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+        cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
        wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
        keep-power-in-suspend;
        enable-sdio-wakeup;
@@ -304,7 +304,7 @@
 &usdhc4 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc4>;
-        cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+        cd-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;
        wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
        status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 4d1a4b977d84..fdd1d7c9a5cc 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -234,8 +234,8 @@
 &usdhc1 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc1>;
-        cd-gpios = <&gpio5 0 0>;
+        cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-        wp-gpios = <&gpio5 1 0>;
+        wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
        enable-sdio-wakeup;
        keep-power-in-suspend;
        status = "okay";
diff --git a/arch/arm/boot/dts/k2e-clocks.dtsi b/arch/arm/boot/dts/k2e-clocks.dtsi
index 4773d6af66a0..d56d68fe7ffc 100644
--- a/arch/arm/boot/dts/k2e-clocks.dtsi
+++ b/arch/arm/boot/dts/k2e-clocks.dtsi
@@ -13,9 +13,8 @@ clocks {
                #clock-cells = <0>;
                compatible = "ti,keystone,main-pll-clock";
                clocks = <&refclksys>;
-                reg = <0x02620350 4>, <0x02310110 4>;
+                reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
-                reg-names = "control", "multiplier";
+                reg-names = "control", "multiplier", "post-divider";
-                fixed-postdiv = <2>;
        };
        papllclk: papllclk@2620358 {
diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi
index 50e555eab50d..675fb8e492c6 100644
--- a/arch/arm/boot/dts/k2e.dtsi
+++ b/arch/arm/boot/dts/k2e.dtsi
@@ -86,7 +86,7 @@
                        gpio,syscon-dev = <&devctrl 0x240>;
                };
-                pcie@21020000 {
+                pcie1: pcie@21020000 {
                        compatible = "ti,keystone-pcie","snps,dw-pcie";
                        clocks = <&clkpcie1>;
                        clock-names = "pcie";
@@ -96,6 +96,7 @@
                        ranges = <0x81000000 0 0 0x23260000 0x4000 0x4000
                                0x82000000 0 0x60000000 0x60000000 0 0x10000000>;
+                        status = "disabled";
                        device_type = "pci";
                        num-lanes = <2>;
@@ -130,10 +131,17 @@
                                        <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>;
                        };
                };
+                mdio: mdio@24200f00 {
+                        compatible      = "ti,keystone_mdio", "ti,davinci_mdio";
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        reg = <0x24200f00 0x100>;
+                        status = "disabled";
+                        clocks = <&clkcpgmac>;
+                        clock-names = "fck";
+                        bus_freq        = <2500000>;
+                };
                /include/ "k2e-netcp.dtsi"
        };
 };
-&mdio {
-        reg = <0x24200f00 0x100>;
-};
diff --git a/arch/arm/boot/dts/k2hk-clocks.dtsi b/arch/arm/boot/dts/k2hk-clocks.dtsi
index d5adee3c0067..af9b7190533a 100644
--- a/arch/arm/boot/dts/k2hk-clocks.dtsi
+++ b/arch/arm/boot/dts/k2hk-clocks.dtsi
@@ -22,9 +22,8 @@ clocks {
                #clock-cells = <0>;
                compatible = "ti,keystone,main-pll-clock";
                clocks = <&refclksys>;
-                reg = <0x02620350 4>, <0x02310110 4>;
+                reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
-                reg-names = "control", "multiplier";
+                reg-names = "control", "multiplier", "post-divider";
-                fixed-postdiv = <2>;
        };
        papllclk: papllclk@2620358 {
diff --git a/arch/arm/boot/dts/k2hk.dtsi b/arch/arm/boot/dts/k2hk.dtsi
index ae6472407b22..d0810a5f2968 100644
--- a/arch/arm/boot/dts/k2hk.dtsi
+++ b/arch/arm/boot/dts/k2hk.dtsi
@@ -98,6 +98,17 @@
                        #gpio-cells = <2>;
                        gpio,syscon-dev = <&devctrl 0x25c>;
                };
+                mdio: mdio@02090300 {
+                        compatible      = "ti,keystone_mdio", "ti,davinci_mdio";
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        reg = <0x02090300 0x100>;
+                        status = "disabled";
+                        clocks = <&clkcpgmac>;
+                        clock-names = "fck";
+                        bus_freq        = <2500000>;
+                };
                /include/ "k2hk-netcp.dtsi"
        };
 };
diff --git a/arch/arm/boot/dts/k2l-clocks.dtsi b/arch/arm/boot/dts/k2l-clocks.dtsi
index eb1e3e29f073..ef8464bb11ff 100644
--- a/arch/arm/boot/dts/k2l-clocks.dtsi
+++ b/arch/arm/boot/dts/k2l-clocks.dtsi
@@ -22,9 +22,8 @@ clocks {
                #clock-cells = <0>;
                compatible = "ti,keystone,main-pll-clock";
                clocks = <&refclksys>;
-                reg = <0x02620350 4>, <0x02310110 4>;
+                reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
-                reg-names = "control", "multiplier";
+                reg-names = "control", "multiplier", "post-divider";
-                fixed-postdiv = <2>;
        };
        papllclk: papllclk@2620358 {
diff --git a/arch/arm/boot/dts/k2l.dtsi b/arch/arm/boot/dts/k2l.dtsi
index 0e007483615e..49fd414f680c 100644
--- a/arch/arm/boot/dts/k2l.dtsi
+++ b/arch/arm/boot/dts/k2l.dtsi
@@ -29,7 +29,6 @@
        };
        soc {
                /include/ "k2l-clocks.dtsi"
                uart2: serial@02348400 {
@@ -79,6 +78,17 @@
                        #gpio-cells = <2>;
                        gpio,syscon-dev = <&devctrl 0x24c>;
                };
+                mdio: mdio@26200f00 {
+                        compatible      = "ti,keystone_mdio", "ti,davinci_mdio";
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        reg = <0x26200f00 0x100>;
+                        status = "disabled";
+                        clocks = <&clkcpgmac>;
+                        clock-names = "fck";
+                        bus_freq        = <2500000>;
+                };
                /include/ "k2l-netcp.dtsi"
        };
 };
@@ -96,7 +106,3 @@
       /* Pin muxed. Enabled and configured by Bootloader */
       status = "disabled";
 };
-&mdio {
-        reg = <0x26200f00 0x100>;
-};
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index c06542b2c954..72816d65f7ec 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -267,17 +267,6 @@
                                  1 0 0x21000A00 0x00000100>;
                };
-                mdio: mdio@02090300 {
-                        compatible      = "ti,keystone_mdio", "ti,davinci_mdio";
-                        #address-cells = <1>;
-                        #size-cells = <0>;
-                        reg             = <0x02090300 0x100>;
-                        status = "disabled";
-                        clocks = <&clkpa>;
-                        clock-names = "fck";
-                        bus_freq        = <2500000>;
-                };
                kirq0: keystone_irq@26202a0 {
                        compatible = "ti,keystone-irq";
                        interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
@@ -286,7 +275,7 @@
                        ti,syscon-dev = <&devctrl 0x2a0>;
                };
-                pcie@21800000 {
+                pcie0: pcie@21800000 {
                        compatible = "ti,keystone-pcie", "snps,dw-pcie";
                        clocks = <&clkpcie>;
                        clock-names = "pcie";
@@ -296,6 +285,7 @@
                        ranges = <0x81000000 0 0 0x23250000 0 0x4000
                                0x82000000 0 0x50000000 0x50000000 0 0x10000000>;
+                        status = "disabled";
                        device_type = "pci";
                        num-lanes = <2>;
diff --git a/arch/arm/boot/dts/kirkwood-d2net.dts b/arch/arm/boot/dts/kirkwood-d2net.dts
index 6b7856025001..e1c25c35e9ce 100644
--- a/arch/arm/boot/dts/kirkwood-d2net.dts
+++ b/arch/arm/boot/dts/kirkwood-d2net.dts
@@ -10,6 +10,7 @@
 /dts-v1/;
+#include <dt-bindings/leds/leds-ns2.h>
 #include "kirkwood-netxbig.dtsi"
 / {
@@ -28,6 +29,10 @@
                        label = "d2net_v2:blue:sata";
                        slow-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
                        cmd-gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+                        modes-map = <NS_V2_LED_OFF  1 0
+                                     NS_V2_LED_ON   0 1
+                                     NS_V2_LED_ON   1 1
+                                     NS_V2_LED_SATA 0 0>;
                };
        };
diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/kirkwood-is2.dts
index da674bbd49a8..4121674abd1c 100644
--- a/arch/arm/boot/dts/kirkwood-is2.dts
+++ b/arch/arm/boot/dts/kirkwood-is2.dts
@@ -1,5 +1,6 @@
 /dts-v1/;
+#include <dt-bindings/leds/leds-ns2.h>
 #include "kirkwood-ns2-common.dtsi"
 / {
@@ -27,6 +28,10 @@
                        label = "ns2:blue:sata";
                        slow-gpio = <&gpio0 29 0>;
                        cmd-gpio = <&gpio0 30 0>;
+                        modes-map = <NS_V2_LED_OFF  1 0
+                                     NS_V2_LED_ON   0 1
+                                     NS_V2_LED_ON   1 1
+                                     NS_V2_LED_SATA 0 0>;
                };
        };
 };
diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/kirkwood-ns2.dts
index 53368d1022cc..190189d235e6 100644
--- a/arch/arm/boot/dts/kirkwood-ns2.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2.dts
@@ -1,5 +1,6 @@
 /dts-v1/;
+#include <dt-bindings/leds/leds-ns2.h>
 #include "kirkwood-ns2-common.dtsi"
 / {
@@ -27,6 +28,10 @@
                        label = "ns2:blue:sata";
                        slow-gpio = <&gpio0 29 0>;
                        cmd-gpio = <&gpio0 30 0>;
+                        modes-map = <NS_V2_LED_OFF  1 0
+                                     NS_V2_LED_ON   0 1
+                                     NS_V2_LED_ON   1 1
+                                     NS_V2_LED_SATA 0 0>;
                };
        };
 };
diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts
index 72c78d0b1116..55cc41d9c80c 100644
--- a/arch/arm/boot/dts/kirkwood-ns2max.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2max.dts
@@ -1,5 +1,6 @@
 /dts-v1/;
+#include <dt-bindings/leds/leds-ns2.h>
 #include "kirkwood-ns2-common.dtsi"
 / {
@@ -46,6 +47,10 @@
                        label = "ns2:blue:sata";
                        slow-gpio = <&gpio0 29 0>;
                        cmd-gpio = <&gpio0 30 0>;
+                        modes-map = <NS_V2_LED_OFF  1 0
+                                     NS_V2_LED_ON   0 1
+                                     NS_V2_LED_ON   1 1
+                                     NS_V2_LED_SATA 0 0>;
                };
        };
 };
diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts
index c441bf62c09f..9935f3ec29b4 100644
--- a/arch/arm/boot/dts/kirkwood-ns2mini.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts
@@ -1,5 +1,6 @@
 /dts-v1/;
+#include <dt-bindings/leds/leds-ns2.h>
 #include "kirkwood-ns2-common.dtsi"
 / {
@@ -47,6 +48,10 @@
                        label = "ns2:blue:sata";
                        slow-gpio = <&gpio0 29 0>;
                        cmd-gpio = <&gpio0 30 0>;
+                        modes-map = <NS_V2_LED_OFF  1 0
+                                     NS_V2_LED_ON   0 1
+                                     NS_V2_LED_ON   1 1
+                                     NS_V2_LED_SATA 0 0>;
                };
        };
 };
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index 11a7963be003..2390f387c271 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -51,7 +51,8 @@
                                };
                                scm_conf: scm_conf@270 {
-                                        compatible = "syscon";
+                                        compatible = "syscon",
+                                                     "simple-bus";
                                        reg = <0x270 0x240>;
                                        #address-cells = <1>;
                                        #size-cells = <1>;
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
index 233c69e50ae3..df8908adb0cb 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
@@ -120,7 +120,7 @@
        lcd0: display@0 {
                compatible = "lgphilips,lb035q02";
-                label = "lcd";
+                label = "lcd35";
                reg = <1>;                                      /* CS1 */
                spi-max-frequency = <10000000>;
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
index f5395b7da912..048fd216970a 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
@@ -98,7 +98,7 @@
        lcd0: display@0 {
                compatible = "samsung,lte430wq-f0c", "panel-dpi";
-                label = "lcd";
+                label = "lcd43";
                pinctrl-names = "default";
                pinctrl-0 = <&lte430_pins>;
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index f884d6adb71e..abc4473e6f8a 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -191,7 +191,8 @@
                                };
                                omap4_padconf_global: omap4_padconf_global@5a0 {
-                                        compatible = "syscon";
+                                        compatible = "syscon",
+                                                     "simple-bus";
                                        reg = <0x5a0 0x170>;
                                        #address-cells = <1>;
                                        #size-cells = <1>;
@@ -551,6 +552,7 @@
                        reg = <0x4a066000 0x100>;
                        interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "mmu_dsp";
+                        #iommu-cells = <0>;
                };
                mmu_ipu: mmu@55082000 {
@@ -558,6 +560,7 @@
                        reg = <0x55082000 0x100>;
                        interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "mmu_ipu";
+                        #iommu-cells = <0>;
                        ti,iommu-bus-err-back;
                };
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 7d24ae0306b5..b1a1263e6001 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -180,7 +180,8 @@
                                };
                                omap5_padconf_global: omap5_padconf_global@5a0 {
-                                        compatible = "syscon";
+                                        compatible = "syscon",
+                                                     "simple-bus";
                                        reg = <0x5a0 0xec>;
                                        #address-cells = <1>;
                                        #size-cells = <1>;
@@ -612,6 +613,7 @@
                        reg = <0x4a066000 0x100>;
                        interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "mmu_dsp";
+                        #iommu-cells = <0>;
                };
                mmu_ipu: mmu@55082000 {
@@ -619,6 +621,7 @@
                        reg = <0x55082000 0x100>;
                        interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "mmu_ipu";
+                        #iommu-cells = <0>;
                        ti,iommu-bus-err-back;
                };
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
index bd35b0674ff6..9bc72a3356e4 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -17,3 +17,13 @@
                status = "ok";
        };
 };
+&spmi_bus {
+        pm8941@0 {
+                coincell@2800 {
+                        status = "ok";
+                        qcom,rset-ohms = <2100>;
+                        qcom,vset-millivolts = <3000>;
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index aa774e685018..968f1043d4f5 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -125,6 +125,12 @@
                        interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
                        qcom,external-resistor-micro-ohms = <10000>;
                };
+                coincell@2800 {
+                        compatible = "qcom,pm8941-coincell";
+                        reg = <0x2800>;
+                        status = "disabled";
+                };
        };
        usid1: pm8941@1 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index 71468a7eb28f..5e17fd147728 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -60,27 +60,27 @@
        rxc-skew-ps = <2000>;
 };
-&mmc0 {
-        vmmc-supply = <&regulator_3_3v>;
-        vqmmc-supply = <&regulator_3_3v>;
-};
-&usb1 {
-        status = "okay";
-};
 &gpio2 {
        status = "okay";
 };
-&i2c1{
+&i2c1 {
        status = "okay";
-        accel1: accel1@53{
+        accel1: accelerometer@53 {
-                compatible = "adxl34x";
+                compatible = "adi,adxl345";
                reg = <0x53>;
-                interrupt-parent = < &portc >;
+                interrupt-parent = <&portc>;
                interrupts = <3 2>;
        };
 };
+&mmc0 {
+        vmmc-supply = <&regulator_3_3v>;
+        vqmmc-supply = <&regulator_3_3v>;
+};
+&usb1 {
+        status = "okay";
+};
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
index d42c84b1df8d..e48857249ce7 100644
--- a/arch/arm/boot/dts/spear1310-evb.dts
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -1,7 +1,7 @@
 /*
 * DTS file for SPEAr1310 Evaluation Baord
 *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi
index 9d342920695a..54bc6d3cf290 100644
--- a/arch/arm/boot/dts/spear1310.dtsi
+++ b/arch/arm/boot/dts/spear1310.dtsi
@@ -1,7 +1,7 @@
 /*
 * DTS file for all SPEAr1310 SoCs
 *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts
index b23e05ed1d60..c611f5606dfe 100644
--- a/arch/arm/boot/dts/spear1340-evb.dts
+++ b/arch/arm/boot/dts/spear1340-evb.dts
@@ -1,7 +1,7 @@
 /*
 * DTS file for SPEAr1340 Evaluation Baord
 *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
index 13e1aa33daa2..df2232d767ed 100644
--- a/arch/arm/boot/dts/spear1340.dtsi
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -1,7 +1,7 @@
 /*
 * DTS file for all SPEAr1340 SoCs
 *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi
index 40accc87e3a2..14594ce8c18a 100644
--- a/arch/arm/boot/dts/spear13xx.dtsi
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -1,7 +1,7 @@
 /*
 * DTS file for all SPEAr13xx SoCs
 *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts
index 5de1431653e4..e859e8288bcd 100644
--- a/arch/arm/boot/dts/spear300-evb.dts
+++ b/arch/arm/boot/dts/spear300-evb.dts
@@ -1,7 +1,7 @@
 /*
 * DTS file for SPEAr300 Evaluation Baord
 *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi
index f79b3dfaabe6..f4e92e599729 100644
--- a/arch/arm/boot/dts/spear300.dtsi
+++ b/arch/arm/boot/dts/spear300.dtsi
@@ -1,7 +1,7 @@
 /*
 * DTS file for SPEAr300 SoC
 *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts
index b09632963d15..070f2c1b7851 100644
--- a/arch/arm/boot/dts/spear310-evb.dts
+++ b/arch/arm/boot/dts/spear310-evb.dts
@@ -1,7 +1,7 @@
 /*
 * DTS file for SPEAr310 Evaluation Baord
 *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi
index 95372080eea6..da210b454753 100644
--- a/arch/arm/boot/dts/spear310.dtsi
+++ b/arch/arm/boot/dts/spear310.dtsi
@@ -1,7 +1,7 @@
 /*
 * DTS file for SPEAr310 SoC
 *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts
index fdedbb514102..1b1034477923 100644
--- a/arch/arm/boot/dts/spear320-evb.dts
+++ b/arch/arm/boot/dts/spear320-evb.dts
@@ -1,7 +1,7 @@
 /*
 * DTS file for SPEAr320 Evaluation Baord
 *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi
index ffea342aeec9..22be6e5edaac 100644
--- a/arch/arm/boot/dts/spear320.dtsi
+++ b/arch/arm/boot/dts/spear320.dtsi
@@ -1,7 +1,7 @@
 /*
 * DTS file for SPEAr320 SoC
 *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi
index f0e3fcf8e323..118135d75899 100644
--- a/arch/arm/boot/dts/spear3xx.dtsi
+++ b/arch/arm/boot/dts/spear3xx.dtsi
@@ -1,7 +1,7 @@
 /*
 * DTS file for all SPEAr3xx SoCs
 *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/ste-ccu8540.dts b/arch/arm/boot/dts/ste-ccu8540.dts
index 32dd55e5f4e6..6eaaf638e52e 100644
--- a/arch/arm/boot/dts/ste-ccu8540.dts
+++ b/arch/arm/boot/dts/ste-ccu8540.dts
@@ -17,6 +17,13 @@
        model = "ST-Ericsson U8540 platform with Device Tree";
        compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
+        /* This stablilizes the serial port enumeration */
+        aliases {
+                serial0 = &ux500_serial0;
+                serial1 = &ux500_serial1;
+                serial2 = &ux500_serial2;
+        };
        memory@0 {
                device_type = "memory";
                reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;
diff --git a/arch/arm/boot/dts/ste-ccu9540.dts b/arch/arm/boot/dts/ste-ccu9540.dts
index 651c56d400a4..c8b815819cfe 100644
--- a/arch/arm/boot/dts/ste-ccu9540.dts
+++ b/arch/arm/boot/dts/ste-ccu9540.dts
@@ -16,6 +16,13 @@
        model = "ST-Ericsson CCU9540 platform with Device Tree";
        compatible = "st-ericsson,ccu9540", "st-ericsson,u9540";
+        /* This stablilizes the serial port enumeration */
+        aliases {
+                serial0 = &ux500_serial0;
+                serial1 = &ux500_serial1;
+                serial2 = &ux500_serial2;
+        };
        memory {
                reg = <0x00000000 0x20000000>;
        };
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 853684ad7773..b8f81fb418ce 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -15,6 +15,33 @@
 #include "skeleton.dtsi"
 / {
+        cpus {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                enable-method = "ste,dbx500-smp";
+                cpu-map {
+                        cluster0 {
+                                core0 {
+                                        cpu = <&CPU0>;
+                                };
+                                core1 {
+                                        cpu = <&CPU1>;
+                                };
+                        };
+                };
+                CPU0: cpu@300 {
+                        device_type = "cpu";
+                        compatible = "arm,cortex-a9";
+                        reg = <0x300>;
+                };
+                CPU1: cpu@301 {
+                        device_type = "cpu";
+                        compatible = "arm,cortex-a9";
+                        reg = <0x301>;
+                };
+        };
        soc {
                #address-cells = <1>;
                #size-cells = <1>;
@@ -22,32 +49,6 @@
                interrupt-parent = <&intc>;
                ranges;
-                cpus {
-                        #address-cells = <1>;
-                        #size-cells = <0>;
-                        cpu-map {
-                                cluster0 {
-                                        core0 {
-                                                cpu = <&CPU0>;
-                                        };
-                                        core1 {
-                                                cpu = <&CPU1>;
-                                        };
-                                };
-                        };
-                        CPU0: cpu@0 {
-                                device_type = "cpu";
-                                compatible = "arm,cortex-a9";
-                                reg = <0>;
-                        };
-                        CPU1: cpu@1 {
-                                device_type = "cpu";
-                                compatible = "arm,cortex-a9";
-                                reg = <1>;
-                        };
-                };
                ptm@801ae000 {
                        compatible = "arm,coresight-etm3x", "arm,primecell";
                        reg = <0x801ae000 0x1000>;
@@ -971,7 +972,7 @@
                        power-domains = <&pm_domains DOMAIN_VAPE>;
                };
-                uart@80120000 {
+                ux500_serial0: uart@80120000 {
                        compatible = "arm,pl011", "arm,primecell";
                        reg = <0x80120000 0x1000>;
                        interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
@@ -986,7 +987,7 @@
                        status = "disabled";
                };
-                uart@80121000 {
+                ux500_serial1: uart@80121000 {
                        compatible = "arm,pl011", "arm,primecell";
                        reg = <0x80121000 0x1000>;
                        interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -1001,7 +1002,7 @@
                        status = "disabled";
                };
-                uart@80007000 {
+                ux500_serial2: uart@80007000 {
                        compatible = "arm,pl011", "arm,primecell";
                        reg = <0x80007000 0x1000>;
                        interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 744c1e3a744d..6d8ce154347e 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -32,11 +32,11 @@
                        status = "okay";
                };
+                /* This UART is unused and thus left disabled */
                uart@80121000 {
                        pinctrl-names = "default", "sleep";
                        pinctrl-0 = <&uart1_default_mode>;
                        pinctrl-1 = <&uart1_sleep_mode>;
-                        status = "okay";
                };
                uart@80007000 {
diff --git a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
index 2b1cb5b584b6..18e9795a94f9 100644
--- a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
+++ b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
@@ -17,6 +17,13 @@
        model = "ST-Ericsson HREF (pre-v60) and ST UIB";
        compatible = "st-ericsson,mop500", "st-ericsson,u8500";
+        /* This stablilizes the serial port enumeration */
+        aliases {
+                serial0 = &ux500_serial0;
+                serial1 = &ux500_serial1;
+                serial2 = &ux500_serial2;
+        };
        soc {
                /* Reset line for the BU21013 touchscreen */
                i2c@80110000 {
diff --git a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
index 59523f866812..24739914e689 100644
--- a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
+++ b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
@@ -16,4 +16,11 @@
 / {
        model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB";
        compatible = "st-ericsson,mop500", "st-ericsson,u8500";
+        /* This stablilizes the serial port enumeration */
+        aliases {
+                serial0 = &ux500_serial0;
+                serial1 = &ux500_serial1;
+                serial2 = &ux500_serial2;
+        };
 };
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index 7f3975b58d16..b0278f4c486c 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -23,6 +23,11 @@
        };
        soc {
+                /* Enable UART1 on this board */
+                uart@80121000 {
+                        status = "okay";
+                };
                i2c@80004000 {
                        tps61052@33 {
                                compatible = "tps61052";
diff --git a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
index 8c6a2de56cf1..c2e1ba019a2f 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
+++ b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
@@ -19,6 +19,13 @@
        model = "ST-Ericsson HREF (v60+) and ST UIB";
        compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
+        /* This stablilizes the serial port enumeration */
+        aliases {
+                serial0 = &ux500_serial0;
+                serial1 = &ux500_serial1;
+                serial2 = &ux500_serial2;
+        };
        soc {
                /* Reset line for the BU21013 touchscreen */
                i2c@80110000 {
diff --git a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
index d53cccdce776..ebd8547e98f1 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
+++ b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
@@ -18,4 +18,11 @@
 / {
        model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB";
        compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
+        /* This stablilizes the serial port enumeration */
+        aliases {
+                serial0 = &ux500_serial0;
+                serial1 = &ux500_serial1;
+                serial2 = &ux500_serial2;
+        };
 };
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index a4bc9e77d640..810cda743b6d 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -43,15 +43,26 @@
                                  <&vaudio_hf_hrefv60_mode>,
                                  <&gbf_hrefv60_mode>,
                                  <&hdtv_hrefv60_mode>,
-                                  <&touch_hrefv60_mode>;
+                                  <&touch_hrefv60_mode>,
+                                  <&gpios_hrefv60_mode>;
                        sdi0 {
-                                /* SD card detect GPIO pin, extend default state */
                                sdi0_default_mode: sdi0_default {
+                                        /* SD card detect GPIO pin, extend default state */
                                        default_hrefv60_cfg1 {
                                                pins = "GPIO95_E8";
                                                ste,config = <&gpio_in_pu>;
                                        };
+                                        /* VMMCI level-shifter enable */
+                                        default_hrefv60_cfg2 {
+                                                pins = "GPIO169_D22";
+                                                ste,config = <&gpio_out_lo>;
+                                        };
+                                        /* VMMCI level-shifter voltage select */
+                                        default_hrefv60_cfg3 {
+                                                pins = "GPIO5_AG6";
+                                                ste,config = <&gpio_out_hi>;
+                                        };
                                };
                        };
                        ipgpio {
@@ -213,6 +224,16 @@
                                        };
                                };
                        };
+                        gpios {
+                                /* Dangling GPIO pins */
+                                gpios_hrefv60_mode: gpios_hrefv60 {
+                                        default_cfg1 {
+                                                /* Normally UART1 RXD, now dangling */
+                                                pins = "GPIO4_AH6";
+                                                ste,config = <&in_pu>;
+                                        };
+                                };
+                        };
                };
        };
 };
diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts
index 3d0b8755caee..3d25dba143a5 100644
--- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts
+++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts
@@ -17,6 +17,7 @@
        };
        aliases {
+                serial1 = &uart1;
                stmpe-i2c0 = &stmpe0;
                stmpe-i2c1 = &stmpe1;
        };
diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts
index 85d3b95dfdba..3c140d05f796 100644
--- a/arch/arm/boot/dts/ste-nomadik-s8815.dts
+++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts
@@ -15,6 +15,10 @@
                bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
        };
+        aliases {
+                serial1 = &uart1;
+        };
        src@101e0000 {
                /* These chrystal drivers are not used on this board */
                disable-sxtalo;
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index 9a5f2ba139b7..ef794a33b4dc 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -757,6 +757,7 @@
                        clock-names = "uartclk", "apb_pclk";
                        pinctrl-names = "default";
                        pinctrl-0 = <&uart0_default_mux>;
+                        status = "disabled";
                };
                uart1: uart@101fb000 {
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 9edadc37719f..32a5ccb14e7e 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -18,6 +18,13 @@
        model = "Calao Systems Snowball platform with device tree";
        compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
+        /* This stablilizes the serial port enumeration */
+        aliases {
+                serial0 = &ux500_serial0;
+                serial1 = &ux500_serial1;
+                serial2 = &ux500_serial2;
+        };
        memory {
                reg = <0x00000000 0x20000000>;
        };
@@ -223,11 +230,11 @@
                        status = "okay";
                };
+                /* This UART is unused and thus left disabled */
                uart@80121000 {
                        pinctrl-names = "default", "sleep";
                        pinctrl-0 = <&uart1_default_mode>;
                        pinctrl-1 = <&uart1_sleep_mode>;
-                        status = "okay";
                };
                uart@80007000 {
@@ -452,7 +459,21 @@
                                                pins = "GPIO21_AB3"; /* DAT31DIR */
                                                ste,config = <&out_hi>;
                                        };
+                                        /* SD card detect GPIO pin, extend default state */
+                                        snowball_cfg2 {
+                                                pins = "GPIO218_AH11";
+                                                ste,config = <&gpio_in_pu>;
+                                        };
+                                        /* VMMCI level-shifter enable */
+                                        snowball_cfg3 {
+                                                pins = "GPIO217_AH12";
+                                                ste,config = <&gpio_out_lo>;
+                                        };
+                                        /* VMMCI level-shifter voltage select */
+                                        snowball_cfg4 {
+                                                pins = "GPIO228_AJ6";
+                                                ste,config = <&gpio_out_hi>;
+                                        };
                                };
                        };
                        ssp0 {