8 files changed, 49 insertions, 37 deletions

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 6d61cd023633..ca1680afa20a 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -151,13 +151,6 @@ config DMA_JZ4780
           If you have a board based on such a SoC and wish to use DMA for
           devices which can use the DMA controller, say Y or M here.
 
-config DMA_OMAP
-        tristate "OMAP DMA support"
-        depends on ARCH_OMAP || COMPILE_TEST
-        select DMA_ENGINE
-        select DMA_VIRTUAL_CHANNELS
-        select TI_DMA_CROSSBAR if (SOC_DRA7XX || COMPILE_TEST)
-
 config DMA_SA11X0
         tristate "SA-11x0 DMA support"
         depends on ARCH_SA1100 || COMPILE_TEST
@@ -574,28 +567,6 @@ config TIMB_DMA
         help
           Enable support for the Timberdale FPGA DMA engine.
 
-config TI_CPPI41
-        tristate "CPPI 4.1 DMA support"
-        depends on (ARCH_OMAP || ARCH_DAVINCI_DA8XX)
-        select DMA_ENGINE
-        help
-          The Communications Port Programming Interface (CPPI) 4.1 DMA engine
-          is currently used by the USB driver on AM335x and DA8xx platforms.
-
-config TI_DMA_CROSSBAR
-        bool
-
-config TI_EDMA
-        bool "TI EDMA support"
-        depends on ARCH_DAVINCI || ARCH_OMAP || ARCH_KEYSTONE || COMPILE_TEST
-        select DMA_ENGINE
-        select DMA_VIRTUAL_CHANNELS
-        select TI_DMA_CROSSBAR if (ARCH_OMAP || COMPILE_TEST)
-        default n
-        help
-          Enable support for the TI EDMA controller. This DMA
-          engine is found on TI DaVinci and AM33xx parts.
-
 config XGENE_DMA
         tristate "APM X-Gene DMA support"
         depends on ARCH_XGENE || COMPILE_TEST
@@ -653,6 +624,8 @@ source "drivers/dma/hsu/Kconfig"
 
 source "drivers/dma/sh/Kconfig"
 
+source "drivers/dma/ti/Kconfig"
+
 # clients
 comment "DMA Clients"
         depends on DMA_ENGINE
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 0f62a4d49aab..203a99d68315 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -24,7 +24,6 @@ obj-$(CONFIG_COH901318) += coh901318.o coh901318_lli.o
 obj-$(CONFIG_DMA_BCM2835) += bcm2835-dma.o
 obj-$(CONFIG_DMA_JZ4740) += dma-jz4740.o
 obj-$(CONFIG_DMA_JZ4780) += dma-jz4780.o
-obj-$(CONFIG_DMA_OMAP) += omap-dma.o
 obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o
 obj-$(CONFIG_DMA_SUN4I) += sun4i-dma.o
 obj-$(CONFIG_DMA_SUN6I) += sun6i-dma.o
@@ -69,13 +68,11 @@ obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
 obj-$(CONFIG_TEGRA20_APB_DMA) += tegra20-apb-dma.o
 obj-$(CONFIG_TEGRA210_ADMA) += tegra210-adma.o
 obj-$(CONFIG_TIMB_DMA) += timb_dma.o
-obj-$(CONFIG_TI_CPPI41) += cppi41.o
-obj-$(CONFIG_TI_DMA_CROSSBAR) += ti-dma-crossbar.o
-obj-$(CONFIG_TI_EDMA) += edma.o
 obj-$(CONFIG_XGENE_DMA) += xgene-dma.o
 obj-$(CONFIG_ZX_DMA) += zx_dma.o
 obj-$(CONFIG_ST_FDMA) += st_fdma.o
 
 obj-y += mediatek/
 obj-y += qcom/
+obj-y += ti/
 obj-y += xilinx/
diff --git a/drivers/dma/ti/Kconfig b/drivers/dma/ti/Kconfig
new file mode 100644
index 000000000000..e5e74e1361dc
--- /dev/null
+++ b/drivers/dma/ti/Kconfig
@@ -0,0 +1,37 @@
+#
+# Texas Instruments DMA drivers
+#
+
+config TI_CPPI41
+        tristate "Texas Instruments CPPI 4.1 DMA support"
+        depends on (ARCH_OMAP || ARCH_DAVINCI_DA8XX)
+        select DMA_ENGINE
+        help
+          The Communications Port Programming Interface (CPPI) 4.1 DMA engine
+          is currently used by the USB driver on AM335x and DA8xx platforms.
+
+config TI_EDMA
+        tristate "Texas Instruments EDMA support"
+        depends on ARCH_DAVINCI || ARCH_OMAP || ARCH_KEYSTONE || COMPILE_TEST
+        select DMA_ENGINE
+        select DMA_VIRTUAL_CHANNELS
+        select TI_DMA_CROSSBAR if (ARCH_OMAP || COMPILE_TEST)
+        default y
+        help
+          Enable support for the TI EDMA (Enhanced DMA) controller. This DMA
+          engine is found on TI DaVinci, AM33xx, AM43xx, DRA7xx and Keystone 2
+          parts.
+
+config DMA_OMAP
+        tristate "Texas Instruments sDMA (omap-dma) support"
+        depends on ARCH_OMAP || COMPILE_TEST
+        select DMA_ENGINE
+        select DMA_VIRTUAL_CHANNELS
+        select TI_DMA_CROSSBAR if (SOC_DRA7XX || COMPILE_TEST)
+        default y
+        help
+          Enable support for the TI sDMA (System DMA or DMA4) controller. This
+          DMA engine is found on OMAP and DRA7xx parts.
+
+config TI_DMA_CROSSBAR
+        bool
diff --git a/drivers/dma/ti/Makefile b/drivers/dma/ti/Makefile
new file mode 100644
index 000000000000..113e59ec9c32
--- /dev/null
+++ b/drivers/dma/ti/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_TI_CPPI41) += cppi41.o
+obj-$(CONFIG_TI_EDMA) += edma.o
+obj-$(CONFIG_DMA_OMAP) += omap-dma.o
+obj-$(CONFIG_TI_DMA_CROSSBAR) += dma-crossbar.o
diff --git a/drivers/dma/cppi41.c b/drivers/dma/ti/cppi41.c
index d9bee65a18a4..1497da367710 100644
--- a/drivers/dma/cppi41.c
+++ b/drivers/dma/ti/cppi41.c
@@ -11,7 +11,7 @@
 #include <linux/interrupt.h>
 #include <linux/of_address.h>
 #include <linux/pm_runtime.h>
-#include "dmaengine.h"
+#include "../dmaengine.h"
 
 #define DESC_TYPE       27
 #define DESC_TYPE_HOST  0x10
diff --git a/drivers/dma/ti-dma-crossbar.c b/drivers/dma/ti/dma-crossbar.c
index 9272b173c746..9272b173c746 100644
--- a/drivers/dma/ti-dma-crossbar.c
+++ b/drivers/dma/ti/dma-crossbar.c
diff --git a/drivers/dma/edma.c b/drivers/dma/ti/edma.c
index 85ea92fcea54..93a5cbf13319 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/ti/edma.c
@@ -33,8 +33,8 @@
 
 #include <linux/platform_data/edma.h>
 
-#include "dmaengine.h"
-#include "virt-dma.h"
+#include "../dmaengine.h"
+#include "../virt-dma.h"
 
 /* Offsets matching "struct edmacc_param" */
 #define PARM_OPT                0x00
diff --git a/drivers/dma/omap-dma.c b/drivers/dma/ti/omap-dma.c
index d21c19822feb..b73fb51fbc81 100644
--- a/drivers/dma/omap-dma.c
+++ b/drivers/dma/ti/omap-dma.c
@@ -21,7 +21,7 @@
 #include <linux/of_dma.h>
 #include <linux/of_device.h>
 
-#include "virt-dma.h"
+#include "../virt-dma.h"
 
 #define OMAP_SDMA_REQUESTS      127
 #define OMAP_SDMA_CHANNELS      32