aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt34
-rw-r--r--MAINTAINERS1
-rw-r--r--drivers/char/tpm/Kconfig20
-rw-r--r--drivers/char/tpm/Makefile2
-rw-r--r--drivers/char/tpm/st33zp24/Kconfig30
-rw-r--r--drivers/char/tpm/st33zp24/Makefile12
-rw-r--r--drivers/char/tpm/st33zp24/i2c.c276
-rw-r--r--drivers/char/tpm/st33zp24/spi.c399
-rw-r--r--drivers/char/tpm/st33zp24/st33zp24.c698
-rw-r--r--drivers/char/tpm/st33zp24/st33zp24.h37
-rw-r--r--drivers/char/tpm/tpm-chip.c92
-rw-r--r--drivers/char/tpm/tpm_i2c_stm_st33.c911
-rw-r--r--drivers/char/tpm/tpm_ibmvtpm.c10
-rw-r--r--drivers/char/tpm/tpm_ibmvtpm.h6
-rw-r--r--drivers/char/tpm/tpm_infineon.c34
-rw-r--r--include/linux/platform_data/st33zp24.h (renamed from include/linux/platform_data/tpm_stm_st33.h)21
16 files changed, 1568 insertions, 1015 deletions
diff --git a/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt b/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt
new file mode 100644
index 000000000000..158b0165e01c
--- /dev/null
+++ b/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt
@@ -0,0 +1,34 @@
1* STMicroelectronics SAS. ST33ZP24 TPM SoC
2
3Required properties:
4- compatible: Should be "st,st33zp24-spi".
5- spi-max-frequency: Maximum SPI frequency (<= 10000000).
6
7Optional ST33ZP24 Properties:
8- interrupt-parent: phandle for the interrupt gpio controller
9- interrupts: GPIO interrupt to which the chip is connected
10- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state.
11If set, power must be present when the platform is going into sleep/hibernate mode.
12
13Optional SoC Specific Properties:
14- pinctrl-names: Contains only one value - "default".
15- pintctrl-0: Specifies the pin control groups used for this controller.
16
17Example (for ARM-based BeagleBoard xM with ST33ZP24 on SPI4):
18
19&mcspi4 {
20
21 status = "okay";
22
23 st33zp24@0 {
24
25 compatible = "st,st33zp24-spi";
26
27 spi-max-frequency = <10000000>;
28
29 interrupt-parent = <&gpio5>;
30 interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
31
32 lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
33 };
34};
diff --git a/MAINTAINERS b/MAINTAINERS
index ddc5a8cf9a8a..55b762ebe523 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9906,6 +9906,7 @@ F: drivers/media/pci/tw68/
9906TPM DEVICE DRIVER 9906TPM DEVICE DRIVER
9907M: Peter Huewe <peterhuewe@gmx.de> 9907M: Peter Huewe <peterhuewe@gmx.de>
9908M: Marcel Selhorst <tpmdd@selhorst.net> 9908M: Marcel Selhorst <tpmdd@selhorst.net>
9909R: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
9909W: http://tpmdd.sourceforge.net 9910W: http://tpmdd.sourceforge.net
9910L: tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers) 9911L: tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers)
9911Q: git git://github.com/PeterHuewe/linux-tpmdd.git 9912Q: git git://github.com/PeterHuewe/linux-tpmdd.git
diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index 9d4e37549eb2..3b84a8b1bfbe 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -25,13 +25,14 @@ menuconfig TCG_TPM
25if TCG_TPM 25if TCG_TPM
26 26
27config TCG_TIS 27config TCG_TIS
28 tristate "TPM Interface Specification 1.2 Interface" 28 tristate "TPM Interface Specification 1.2 Interface / TPM 2.0 FIFO Interface"
29 depends on X86 29 depends on X86
30 ---help--- 30 ---help---
31 If you have a TPM security chip that is compliant with the 31 If you have a TPM security chip that is compliant with the
32 TCG TIS 1.2 TPM specification say Yes and it will be accessible 32 TCG TIS 1.2 TPM specification (TPM1.2) or the TCG PTP FIFO
33 from within Linux. To compile this driver as a module, choose 33 specification (TPM2.0) say Yes and it will be accessible from
34 M here; the module will be called tpm_tis. 34 within Linux. To compile this driver as a module, choose M here;
35 the module will be called tpm_tis.
35 36
36config TCG_TIS_I2C_ATMEL 37config TCG_TIS_I2C_ATMEL
37 tristate "TPM Interface Specification 1.2 Interface (I2C - Atmel)" 38 tristate "TPM Interface Specification 1.2 Interface (I2C - Atmel)"
@@ -100,16 +101,6 @@ config TCG_IBMVTPM
100 will be accessible from within Linux. To compile this driver 101 will be accessible from within Linux. To compile this driver
101 as a module, choose M here; the module will be called tpm_ibmvtpm. 102 as a module, choose M here; the module will be called tpm_ibmvtpm.
102 103
103config TCG_TIS_I2C_ST33
104 tristate "TPM Interface Specification 1.2 Interface (I2C - STMicroelectronics)"
105 depends on I2C
106 depends on GPIOLIB
107 ---help---
108 If you have a TPM security chip from STMicroelectronics working with
109 an I2C bus say Yes and it will be accessible from within Linux.
110 To compile this driver as a module, choose M here; the module will be
111 called tpm_i2c_stm_st33.
112
113config TCG_XEN 104config TCG_XEN
114 tristate "XEN TPM Interface" 105 tristate "XEN TPM Interface"
115 depends on TCG_TPM && XEN 106 depends on TCG_TPM && XEN
@@ -131,4 +122,5 @@ config TCG_CRB
131 from within Linux. To compile this driver as a module, choose 122 from within Linux. To compile this driver as a module, choose
132 M here; the module will be called tpm_crb. 123 M here; the module will be called tpm_crb.
133 124
125source "drivers/char/tpm/st33zp24/Kconfig"
134endif # TCG_TPM 126endif # TCG_TPM
diff --git a/drivers/char/tpm/Makefile b/drivers/char/tpm/Makefile
index 990cf183931d..56e8f1f3dc7e 100644
--- a/drivers/char/tpm/Makefile
+++ b/drivers/char/tpm/Makefile
@@ -20,6 +20,6 @@ obj-$(CONFIG_TCG_NSC) += tpm_nsc.o
20obj-$(CONFIG_TCG_ATMEL) += tpm_atmel.o 20obj-$(CONFIG_TCG_ATMEL) += tpm_atmel.o
21obj-$(CONFIG_TCG_INFINEON) += tpm_infineon.o 21obj-$(CONFIG_TCG_INFINEON) += tpm_infineon.o
22obj-$(CONFIG_TCG_IBMVTPM) += tpm_ibmvtpm.o 22obj-$(CONFIG_TCG_IBMVTPM) += tpm_ibmvtpm.o
23obj-$(CONFIG_TCG_TIS_I2C_ST33) += tpm_i2c_stm_st33.o 23obj-$(CONFIG_TCG_TIS_ST33ZP24) += st33zp24/
24obj-$(CONFIG_TCG_XEN) += xen-tpmfront.o 24obj-$(CONFIG_TCG_XEN) += xen-tpmfront.o
25obj-$(CONFIG_TCG_CRB) += tpm_crb.o 25obj-$(CONFIG_TCG_CRB) += tpm_crb.o
diff --git a/drivers/char/tpm/st33zp24/Kconfig b/drivers/char/tpm/st33zp24/Kconfig
new file mode 100644
index 000000000000..09cb727864f0
--- /dev/null
+++ b/drivers/char/tpm/st33zp24/Kconfig
@@ -0,0 +1,30 @@
1config TCG_TIS_ST33ZP24
2 tristate "STMicroelectronics TPM Interface Specification 1.2 Interface"
3 depends on GPIOLIB
4 ---help---
5 STMicroelectronics ST33ZP24 core driver. It implements the core
6 TPM1.2 logic and hooks into the TPM kernel APIs. Physical layers will
7 register against it.
8
9 To compile this driver as a module, choose m here. The module will be called
10 tpm_st33zp24.
11
12config TCG_TIS_ST33ZP24_I2C
13 tristate "TPM 1.2 ST33ZP24 I2C support"
14 depends on TCG_TIS_ST33ZP24
15 depends on I2C
16 ---help---
17 This module adds support for the STMicroelectronics TPM security chip
18 ST33ZP24 with i2c interface.
19 To compile this driver as a module, choose M here; the module will be
20 called tpm_st33zp24_i2c.
21
22config TCG_TIS_ST33ZP24_SPI
23 tristate "TPM 1.2 ST33ZP24 SPI support"
24 depends on TCG_TIS_ST33ZP24
25 depends on SPI
26 ---help---
27 This module adds support for the STMicroelectronics TPM security chip
28 ST33ZP24 with spi interface.
29 To compile this driver as a module, choose M here; the module will be
30 called tpm_st33zp24_spi.
diff --git a/drivers/char/tpm/st33zp24/Makefile b/drivers/char/tpm/st33zp24/Makefile
new file mode 100644
index 000000000000..74a722e5e068
--- /dev/null
+++ b/drivers/char/tpm/st33zp24/Makefile
@@ -0,0 +1,12 @@
1#
2# Makefile for ST33ZP24 TPM 1.2 driver
3#
4
5tpm_st33zp24-objs = st33zp24.o
6obj-$(CONFIG_TCG_TIS_ST33ZP24) += tpm_st33zp24.o
7
8tpm_st33zp24_i2c-objs = i2c.o
9obj-$(CONFIG_TCG_TIS_ST33ZP24_I2C) += tpm_st33zp24_i2c.o
10
11tpm_st33zp24_spi-objs = spi.o
12obj-$(CONFIG_TCG_TIS_ST33ZP24_SPI) += tpm_st33zp24_spi.o
diff --git a/drivers/char/tpm/st33zp24/i2c.c b/drivers/char/tpm/st33zp24/i2c.c
new file mode 100644
index 000000000000..ad1ee180e0c2
--- /dev/null
+++ b/drivers/char/tpm/st33zp24/i2c.c
@@ -0,0 +1,276 @@
1/*
2 * STMicroelectronics TPM I2C Linux driver for TPM ST33ZP24
3 * Copyright (C) 2009 - 2015 STMicroelectronics
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, see <http://www.gnu.org/licenses/>.
17 */
18
19#include <linux/module.h>
20#include <linux/i2c.h>
21#include <linux/gpio.h>
22#include <linux/of_irq.h>
23#include <linux/of_gpio.h>
24#include <linux/tpm.h>
25#include <linux/platform_data/st33zp24.h>
26
27#include "st33zp24.h"
28
29#define TPM_DUMMY_BYTE 0xAA
30
31struct st33zp24_i2c_phy {
32 struct i2c_client *client;
33 u8 buf[TPM_BUFSIZE + 1];
34 int io_lpcpd;
35};
36
37/*
38 * write8_reg
39 * Send byte to the TIS register according to the ST33ZP24 I2C protocol.
40 * @param: tpm_register, the tpm tis register where the data should be written
41 * @param: tpm_data, the tpm_data to write inside the tpm_register
42 * @param: tpm_size, The length of the data
43 * @return: Returns negative errno, or else the number of bytes written.
44 */
45static int write8_reg(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size)
46{
47 struct st33zp24_i2c_phy *phy = phy_id;
48
49 phy->buf[0] = tpm_register;
50 memcpy(phy->buf + 1, tpm_data, tpm_size);
51 return i2c_master_send(phy->client, phy->buf, tpm_size + 1);
52} /* write8_reg() */
53
54/*
55 * read8_reg
56 * Recv byte from the TIS register according to the ST33ZP24 I2C protocol.
57 * @param: tpm_register, the tpm tis register where the data should be read
58 * @param: tpm_data, the TPM response
59 * @param: tpm_size, tpm TPM response size to read.
60 * @return: number of byte read successfully: should be one if success.
61 */
62static int read8_reg(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size)
63{
64 struct st33zp24_i2c_phy *phy = phy_id;
65 u8 status = 0;
66 u8 data;
67
68 data = TPM_DUMMY_BYTE;
69 status = write8_reg(phy, tpm_register, &data, 1);
70 if (status == 2)
71 status = i2c_master_recv(phy->client, tpm_data, tpm_size);
72 return status;
73} /* read8_reg() */
74
75/*
76 * st33zp24_i2c_send
77 * Send byte to the TIS register according to the ST33ZP24 I2C protocol.
78 * @param: phy_id, the phy description
79 * @param: tpm_register, the tpm tis register where the data should be written
80 * @param: tpm_data, the tpm_data to write inside the tpm_register
81 * @param: tpm_size, the length of the data
82 * @return: number of byte written successfully: should be one if success.
83 */
84static int st33zp24_i2c_send(void *phy_id, u8 tpm_register, u8 *tpm_data,
85 int tpm_size)
86{
87 return write8_reg(phy_id, tpm_register | TPM_WRITE_DIRECTION, tpm_data,
88 tpm_size);
89}
90
91/*
92 * st33zp24_i2c_recv
93 * Recv byte from the TIS register according to the ST33ZP24 I2C protocol.
94 * @param: phy_id, the phy description
95 * @param: tpm_register, the tpm tis register where the data should be read
96 * @param: tpm_data, the TPM response
97 * @param: tpm_size, tpm TPM response size to read.
98 * @return: number of byte read successfully: should be one if success.
99 */
100static int st33zp24_i2c_recv(void *phy_id, u8 tpm_register, u8 *tpm_data,
101 int tpm_size)
102{
103 return read8_reg(phy_id, tpm_register, tpm_data, tpm_size);
104}
105
106static const struct st33zp24_phy_ops i2c_phy_ops = {
107 .send = st33zp24_i2c_send,
108 .recv = st33zp24_i2c_recv,
109};
110
111#ifdef CONFIG_OF
112static int st33zp24_i2c_of_request_resources(struct st33zp24_i2c_phy *phy)
113{
114 struct device_node *pp;
115 struct i2c_client *client = phy->client;
116 int gpio;
117 int ret;
118
119 pp = client->dev.of_node;
120 if (!pp) {
121 dev_err(&client->dev, "No platform data\n");
122 return -ENODEV;
123 }
124
125 /* Get GPIO from device tree */
126 gpio = of_get_named_gpio(pp, "lpcpd-gpios", 0);
127 if (gpio < 0) {
128 dev_err(&client->dev,
129 "Failed to retrieve lpcpd-gpios from dts.\n");
130 phy->io_lpcpd = -1;
131 /*
132 * lpcpd pin is not specified. This is not an issue as
133 * power management can be also managed by TPM specific
134 * commands. So leave with a success status code.
135 */
136 return 0;
137 }
138 /* GPIO request and configuration */
139 ret = devm_gpio_request_one(&client->dev, gpio,
140 GPIOF_OUT_INIT_HIGH, "TPM IO LPCPD");
141 if (ret) {
142 dev_err(&client->dev, "Failed to request lpcpd pin\n");
143 return -ENODEV;
144 }
145 phy->io_lpcpd = gpio;
146
147 return 0;
148}
149#else
150static int st33zp24_i2c_of_request_resources(struct st33zp24_i2c_phy *phy)
151{
152 return -ENODEV;
153}
154#endif
155
156static int st33zp24_i2c_request_resources(struct i2c_client *client,
157 struct st33zp24_i2c_phy *phy)
158{
159 struct st33zp24_platform_data *pdata;
160 int ret;
161
162 pdata = client->dev.platform_data;
163 if (!pdata) {
164 dev_err(&client->dev, "No platform data\n");
165 return -ENODEV;
166 }
167
168 /* store for late use */
169 phy->io_lpcpd = pdata->io_lpcpd;
170
171 if (gpio_is_valid(pdata->io_lpcpd)) {
172 ret = devm_gpio_request_one(&client->dev,
173 pdata->io_lpcpd, GPIOF_OUT_INIT_HIGH,
174 "TPM IO_LPCPD");
175 if (ret) {
176 dev_err(&client->dev, "Failed to request lpcpd pin\n");
177 return ret;
178 }
179 }
180
181 return 0;
182}
183
184/*
185 * st33zp24_i2c_probe initialize the TPM device
186 * @param: client, the i2c_client drescription (TPM I2C description).
187 * @param: id, the i2c_device_id struct.
188 * @return: 0 in case of success.
189 * -1 in other case.
190 */
191static int st33zp24_i2c_probe(struct i2c_client *client,
192 const struct i2c_device_id *id)
193{
194 int ret;
195 struct st33zp24_platform_data *pdata;
196 struct st33zp24_i2c_phy *phy;
197
198 if (!client) {
199 pr_info("%s: i2c client is NULL. Device not accessible.\n",
200 __func__);
201 return -ENODEV;
202 }
203
204 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
205 dev_info(&client->dev, "client not i2c capable\n");
206 return -ENODEV;
207 }
208
209 phy = devm_kzalloc(&client->dev, sizeof(struct st33zp24_i2c_phy),
210 GFP_KERNEL);
211 if (!phy)
212 return -ENOMEM;
213
214 phy->client = client;
215 pdata = client->dev.platform_data;
216 if (!pdata && client->dev.of_node) {
217 ret = st33zp24_i2c_of_request_resources(phy);
218 if (ret)
219 return ret;
220 } else if (pdata) {
221 ret = st33zp24_i2c_request_resources(client, phy);
222 if (ret)
223 return ret;
224 }
225
226 return st33zp24_probe(phy, &i2c_phy_ops, &client->dev, client->irq,
227 phy->io_lpcpd);
228}
229
230/*
231 * st33zp24_i2c_remove remove the TPM device
232 * @param: client, the i2c_client description (TPM I2C description).
233 * @return: 0 in case of success.
234 */
235static int st33zp24_i2c_remove(struct i2c_client *client)
236{
237 struct tpm_chip *chip = i2c_get_clientdata(client);
238
239 return st33zp24_remove(chip);
240}
241
242static const struct i2c_device_id st33zp24_i2c_id[] = {
243 {TPM_ST33_I2C, 0},
244 {}
245};
246MODULE_DEVICE_TABLE(i2c, st33zp24_i2c_id);
247
248#ifdef CONFIG_OF
249static const struct of_device_id of_st33zp24_i2c_match[] = {
250 { .compatible = "st,st33zp24-i2c", },
251 {}
252};
253MODULE_DEVICE_TABLE(of, of_st33zp24_i2c_match);
254#endif
255
256static SIMPLE_DEV_PM_OPS(st33zp24_i2c_ops, st33zp24_pm_suspend,
257 st33zp24_pm_resume);
258
259static struct i2c_driver st33zp24_i2c_driver = {
260 .driver = {
261 .owner = THIS_MODULE,
262 .name = TPM_ST33_I2C,
263 .pm = &st33zp24_i2c_ops,
264 .of_match_table = of_match_ptr(of_st33zp24_i2c_match),
265 },
266 .probe = st33zp24_i2c_probe,
267 .remove = st33zp24_i2c_remove,
268 .id_table = st33zp24_i2c_id
269};
270
271module_i2c_driver(st33zp24_i2c_driver);
272
273MODULE_AUTHOR("TPM support (TPMsupport@list.st.com)");
274MODULE_DESCRIPTION("STM TPM 1.2 I2C ST33 Driver");
275MODULE_VERSION("1.3.0");
276MODULE_LICENSE("GPL");
diff --git a/drivers/char/tpm/st33zp24/spi.c b/drivers/char/tpm/st33zp24/spi.c
new file mode 100644
index 000000000000..f0184a1b0c1c
--- /dev/null
+++ b/drivers/char/tpm/st33zp24/spi.c
@@ -0,0 +1,399 @@
1/*
2 * STMicroelectronics TPM SPI Linux driver for TPM ST33ZP24
3 * Copyright (C) 2009 - 2015 STMicroelectronics
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, see <http://www.gnu.org/licenses/>.
17 */
18
19#include <linux/module.h>
20#include <linux/spi/spi.h>
21#include <linux/gpio.h>
22#include <linux/of_irq.h>
23#include <linux/of_gpio.h>
24#include <linux/tpm.h>
25#include <linux/platform_data/st33zp24.h>
26
27#include "st33zp24.h"
28
29#define TPM_DATA_FIFO 0x24
30#define TPM_INTF_CAPABILITY 0x14
31
32#define TPM_DUMMY_BYTE 0x00
33
34#define MAX_SPI_LATENCY 15
35#define LOCALITY0 0
36
37#define ST33ZP24_OK 0x5A
38#define ST33ZP24_UNDEFINED_ERR 0x80
39#define ST33ZP24_BADLOCALITY 0x81
40#define ST33ZP24_TISREGISTER_UKNOWN 0x82
41#define ST33ZP24_LOCALITY_NOT_ACTIVATED 0x83
42#define ST33ZP24_HASH_END_BEFORE_HASH_START 0x84
43#define ST33ZP24_BAD_COMMAND_ORDER 0x85
44#define ST33ZP24_INCORECT_RECEIVED_LENGTH 0x86
45#define ST33ZP24_TPM_FIFO_OVERFLOW 0x89
46#define ST33ZP24_UNEXPECTED_READ_FIFO 0x8A
47#define ST33ZP24_UNEXPECTED_WRITE_FIFO 0x8B
48#define ST33ZP24_CMDRDY_SET_WHEN_PROCESSING_HASH_END 0x90
49#define ST33ZP24_DUMMY_BYTES 0x00
50
51/*
52 * TPM command can be up to 2048 byte, A TPM response can be up to
53 * 1024 byte.
54 * Between command and response, there are latency byte (up to 15
55 * usually on st33zp24 2 are enough).
56 *
57 * Overall when sending a command and expecting an answer we need if
58 * worst case:
59 * 2048 (for the TPM command) + 1024 (for the TPM answer). We need
60 * some latency byte before the answer is available (max 15).
61 * We have 2048 + 1024 + 15.
62 */
63#define ST33ZP24_SPI_BUFFER_SIZE (TPM_BUFSIZE + (TPM_BUFSIZE / 2) +\
64 MAX_SPI_LATENCY)
65
66
67struct st33zp24_spi_phy {
68 struct spi_device *spi_device;
69 struct spi_transfer spi_xfer;
70 u8 tx_buf[ST33ZP24_SPI_BUFFER_SIZE];
71 u8 rx_buf[ST33ZP24_SPI_BUFFER_SIZE];
72
73 int io_lpcpd;
74 int latency;
75};
76
77static int st33zp24_status_to_errno(u8 code)
78{
79 switch (code) {
80 case ST33ZP24_OK:
81 return 0;
82 case ST33ZP24_UNDEFINED_ERR:
83 case ST33ZP24_BADLOCALITY:
84 case ST33ZP24_TISREGISTER_UKNOWN:
85 case ST33ZP24_LOCALITY_NOT_ACTIVATED:
86 case ST33ZP24_HASH_END_BEFORE_HASH_START:
87 case ST33ZP24_BAD_COMMAND_ORDER:
88 case ST33ZP24_UNEXPECTED_READ_FIFO:
89 case ST33ZP24_UNEXPECTED_WRITE_FIFO:
90 case ST33ZP24_CMDRDY_SET_WHEN_PROCESSING_HASH_END:
91 return -EPROTO;
92 case ST33ZP24_INCORECT_RECEIVED_LENGTH:
93 case ST33ZP24_TPM_FIFO_OVERFLOW:
94 return -EMSGSIZE;
95 case ST33ZP24_DUMMY_BYTES:
96 return -ENOSYS;
97 }
98 return code;
99}
100
101/*
102 * st33zp24_spi_send
103 * Send byte to the TIS register according to the ST33ZP24 SPI protocol.
104 * @param: phy_id, the phy description
105 * @param: tpm_register, the tpm tis register where the data should be written
106 * @param: tpm_data, the tpm_data to write inside the tpm_register
107 * @param: tpm_size, The length of the data
108 * @return: should be zero if success else a negative error code.
109 */
110static int st33zp24_spi_send(void *phy_id, u8 tpm_register, u8 *tpm_data,
111 int tpm_size)
112{
113 u8 data = 0;
114 int total_length = 0, nbr_dummy_bytes = 0, ret = 0;
115 struct st33zp24_spi_phy *phy = phy_id;
116 struct spi_device *dev = phy->spi_device;
117 u8 *tx_buf = (u8 *)phy->spi_xfer.tx_buf;
118 u8 *rx_buf = phy->spi_xfer.rx_buf;
119
120 /* Pre-Header */
121 data = TPM_WRITE_DIRECTION | LOCALITY0;
122 memcpy(tx_buf + total_length, &data, sizeof(data));
123 total_length++;
124 data = tpm_register;
125 memcpy(tx_buf + total_length, &data, sizeof(data));
126 total_length++;
127
128 if (tpm_size > 0 && tpm_register == TPM_DATA_FIFO) {
129 tx_buf[total_length++] = tpm_size >> 8;
130 tx_buf[total_length++] = tpm_size;
131 }
132
133 memcpy(&tx_buf[total_length], tpm_data, tpm_size);
134 total_length += tpm_size;
135
136 nbr_dummy_bytes = phy->latency;
137 memset(&tx_buf[total_length], TPM_DUMMY_BYTE, nbr_dummy_bytes);
138
139 phy->spi_xfer.len = total_length + nbr_dummy_bytes;
140
141 ret = spi_sync_transfer(dev, &phy->spi_xfer, 1);
142 if (ret == 0)
143 ret = rx_buf[total_length + nbr_dummy_bytes - 1];
144
145 return st33zp24_status_to_errno(ret);
146} /* st33zp24_spi_send() */
147
148/*
149 * read8_recv
150 * Recv byte from the TIS register according to the ST33ZP24 SPI protocol.
151 * @param: phy_id, the phy description
152 * @param: tpm_register, the tpm tis register where the data should be read
153 * @param: tpm_data, the TPM response
154 * @param: tpm_size, tpm TPM response size to read.
155 * @return: should be zero if success else a negative error code.
156 */
157static int read8_reg(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size)
158{
159 u8 data = 0;
160 int total_length = 0, nbr_dummy_bytes, ret;
161 struct st33zp24_spi_phy *phy = phy_id;
162 struct spi_device *dev = phy->spi_device;
163 u8 *tx_buf = (u8 *)phy->spi_xfer.tx_buf;
164 u8 *rx_buf = phy->spi_xfer.rx_buf;
165
166 /* Pre-Header */
167 data = LOCALITY0;
168 memcpy(tx_buf + total_length, &data, sizeof(data));
169 total_length++;
170 data = tpm_register;
171 memcpy(tx_buf + total_length, &data, sizeof(data));
172 total_length++;
173
174 nbr_dummy_bytes = phy->latency;
175 memset(&tx_buf[total_length], TPM_DUMMY_BYTE,
176 nbr_dummy_bytes + tpm_size);
177
178 phy->spi_xfer.len = total_length + nbr_dummy_bytes + tpm_size;
179
180 /* header + status byte + size of the data + status byte */
181 ret = spi_sync_transfer(dev, &phy->spi_xfer, 1);
182 if (tpm_size > 0 && ret == 0) {
183 ret = rx_buf[total_length + nbr_dummy_bytes - 1];
184
185 memcpy(tpm_data, rx_buf + total_length + nbr_dummy_bytes,
186 tpm_size);
187 }
188
189 return ret;
190} /* read8_reg() */
191
192/*
193 * st33zp24_spi_recv
194 * Recv byte from the TIS register according to the ST33ZP24 SPI protocol.
195 * @param: phy_id, the phy description
196 * @param: tpm_register, the tpm tis register where the data should be read
197 * @param: tpm_data, the TPM response
198 * @param: tpm_size, tpm TPM response size to read.
199 * @return: number of byte read successfully: should be one if success.
200 */
201static int st33zp24_spi_recv(void *phy_id, u8 tpm_register, u8 *tpm_data,
202 int tpm_size)
203{
204 int ret;
205
206 ret = read8_reg(phy_id, tpm_register, tpm_data, tpm_size);
207 if (!st33zp24_status_to_errno(ret))
208 return tpm_size;
209 return ret;
210} /* st33zp24_spi_recv() */
211
212static int evaluate_latency(void *phy_id)
213{
214 struct st33zp24_spi_phy *phy = phy_id;
215 int latency = 1, status = 0;
216 u8 data = 0;
217
218 while (!status && latency < MAX_SPI_LATENCY) {
219 phy->latency = latency;
220 status = read8_reg(phy_id, TPM_INTF_CAPABILITY, &data, 1);
221 latency++;
222 }
223 return latency - 1;
224} /* evaluate_latency() */
225
226static const struct st33zp24_phy_ops spi_phy_ops = {
227 .send = st33zp24_spi_send,
228 .recv = st33zp24_spi_recv,
229};
230
231#ifdef CONFIG_OF
232static int tpm_stm_spi_of_request_resources(struct st33zp24_spi_phy *phy)
233{
234 struct device_node *pp;
235 struct spi_device *dev = phy->spi_device;
236 int gpio;
237 int ret;
238
239 pp = dev->dev.of_node;
240 if (!pp) {
241 dev_err(&dev->dev, "No platform data\n");
242 return -ENODEV;
243 }
244
245 /* Get GPIO from device tree */
246 gpio = of_get_named_gpio(pp, "lpcpd-gpios", 0);
247 if (gpio < 0) {
248 dev_err(&dev->dev,
249 "Failed to retrieve lpcpd-gpios from dts.\n");
250 phy->io_lpcpd = -1;
251 /*
252 * lpcpd pin is not specified. This is not an issue as
253 * power management can be also managed by TPM specific
254 * commands. So leave with a success status code.
255 */
256 return 0;
257 }
258 /* GPIO request and configuration */
259 ret = devm_gpio_request_one(&dev->dev, gpio,
260 GPIOF_OUT_INIT_HIGH, "TPM IO LPCPD");
261 if (ret) {
262 dev_err(&dev->dev, "Failed to request lpcpd pin\n");
263 return -ENODEV;
264 }
265 phy->io_lpcpd = gpio;
266
267 return 0;
268}
269#else
270static int tpm_stm_spi_of_request_resources(struct st33zp24_spi_phy *phy)
271{
272 return -ENODEV;
273}
274#endif
275
276static int tpm_stm_spi_request_resources(struct spi_device *dev,
277 struct st33zp24_spi_phy *phy)
278{
279 struct st33zp24_platform_data *pdata;
280 int ret;
281
282 pdata = dev->dev.platform_data;
283 if (!pdata) {
284 dev_err(&dev->dev, "No platform data\n");
285 return -ENODEV;
286 }
287
288 /* store for late use */
289 phy->io_lpcpd = pdata->io_lpcpd;
290
291 if (gpio_is_valid(pdata->io_lpcpd)) {
292 ret = devm_gpio_request_one(&dev->dev,
293 pdata->io_lpcpd, GPIOF_OUT_INIT_HIGH,
294 "TPM IO_LPCPD");
295 if (ret) {
296 dev_err(&dev->dev, "%s : reset gpio_request failed\n",
297 __FILE__);
298 return ret;
299 }
300 }
301
302 return 0;
303}
304
305/*
306 * tpm_st33_spi_probe initialize the TPM device
307 * @param: dev, the spi_device drescription (TPM SPI description).
308 * @return: 0 in case of success.
309 * or a negative value describing the error.
310 */
311static int
312tpm_st33_spi_probe(struct spi_device *dev)
313{
314 int ret;
315 struct st33zp24_platform_data *pdata;
316 struct st33zp24_spi_phy *phy;
317
318 /* Check SPI platform functionnalities */
319 if (!dev) {
320 pr_info("%s: dev is NULL. Device is not accessible.\n",
321 __func__);
322 return -ENODEV;
323 }
324
325 phy = devm_kzalloc(&dev->dev, sizeof(struct st33zp24_spi_phy),
326 GFP_KERNEL);
327 if (!phy)
328 return -ENOMEM;
329
330 phy->spi_device = dev;
331 pdata = dev->dev.platform_data;
332 if (!pdata && dev->dev.of_node) {
333 ret = tpm_stm_spi_of_request_resources(phy);
334 if (ret)
335 return ret;
336 } else if (pdata) {
337 ret = tpm_stm_spi_request_resources(dev, phy);
338 if (ret)
339 return ret;
340 }
341
342 phy->spi_xfer.tx_buf = phy->tx_buf;
343 phy->spi_xfer.rx_buf = phy->rx_buf;
344
345 phy->latency = evaluate_latency(phy);
346 if (phy->latency <= 0)
347 return -ENODEV;
348
349 return st33zp24_probe(phy, &spi_phy_ops, &dev->dev, dev->irq,
350 phy->io_lpcpd);
351}
352
353/*
354 * tpm_st33_spi_remove remove the TPM device
355 * @param: client, the spi_device drescription (TPM SPI description).
356 * @return: 0 in case of success.
357 */
358static int tpm_st33_spi_remove(struct spi_device *dev)
359{
360 struct tpm_chip *chip = spi_get_drvdata(dev);
361
362 return st33zp24_remove(chip);
363}
364
365static const struct spi_device_id st33zp24_spi_id[] = {
366 {TPM_ST33_SPI, 0},
367 {}
368};
369MODULE_DEVICE_TABLE(spi, st33zp24_spi_id);
370
371#ifdef CONFIG_OF
372static const struct of_device_id of_st33zp24_spi_match[] = {
373 { .compatible = "st,st33zp24-spi", },
374 {}
375};
376MODULE_DEVICE_TABLE(of, of_st33zp24_spi_match);
377#endif
378
379static SIMPLE_DEV_PM_OPS(st33zp24_spi_ops, st33zp24_pm_suspend,
380 st33zp24_pm_resume);
381
382static struct spi_driver tpm_st33_spi_driver = {
383 .driver = {
384 .owner = THIS_MODULE,
385 .name = TPM_ST33_SPI,
386 .pm = &st33zp24_spi_ops,
387 .of_match_table = of_match_ptr(of_st33zp24_spi_match),
388 },
389 .probe = tpm_st33_spi_probe,
390 .remove = tpm_st33_spi_remove,
391 .id_table = st33zp24_spi_id,
392};
393
394module_spi_driver(tpm_st33_spi_driver);
395
396MODULE_AUTHOR("TPM support (TPMsupport@list.st.com)");
397MODULE_DESCRIPTION("STM TPM 1.2 SPI ST33 Driver");
398MODULE_VERSION("1.3.0");
399MODULE_LICENSE("GPL");
diff --git a/drivers/char/tpm/st33zp24/st33zp24.c b/drivers/char/tpm/st33zp24/st33zp24.c
new file mode 100644
index 000000000000..8d626784cd8d
--- /dev/null
+++ b/drivers/char/tpm/st33zp24/st33zp24.c
@@ -0,0 +1,698 @@
1/*
2 * STMicroelectronics TPM Linux driver for TPM ST33ZP24
3 * Copyright (C) 2009 - 2015 STMicroelectronics
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, see <http://www.gnu.org/licenses/>.
17 */
18
19#include <linux/module.h>
20#include <linux/fs.h>
21#include <linux/miscdevice.h>
22#include <linux/kernel.h>
23#include <linux/delay.h>
24#include <linux/wait.h>
25#include <linux/freezer.h>
26#include <linux/string.h>
27#include <linux/interrupt.h>
28#include <linux/gpio.h>
29#include <linux/sched.h>
30#include <linux/uaccess.h>
31#include <linux/io.h>
32#include <linux/slab.h>
33
34#include "../tpm.h"
35#include "st33zp24.h"
36
37#define TPM_ACCESS 0x0
38#define TPM_STS 0x18
39#define TPM_DATA_FIFO 0x24
40#define TPM_INTF_CAPABILITY 0x14
41#define TPM_INT_STATUS 0x10
42#define TPM_INT_ENABLE 0x08
43
44#define LOCALITY0 0
45
46enum st33zp24_access {
47 TPM_ACCESS_VALID = 0x80,
48 TPM_ACCESS_ACTIVE_LOCALITY = 0x20,
49 TPM_ACCESS_REQUEST_PENDING = 0x04,
50 TPM_ACCESS_REQUEST_USE = 0x02,
51};
52
53enum st33zp24_status {
54 TPM_STS_VALID = 0x80,
55 TPM_STS_COMMAND_READY = 0x40,
56 TPM_STS_GO = 0x20,
57 TPM_STS_DATA_AVAIL = 0x10,
58 TPM_STS_DATA_EXPECT = 0x08,
59};
60
61enum st33zp24_int_flags {
62 TPM_GLOBAL_INT_ENABLE = 0x80,
63 TPM_INTF_CMD_READY_INT = 0x080,
64 TPM_INTF_FIFO_AVALAIBLE_INT = 0x040,
65 TPM_INTF_WAKE_UP_READY_INT = 0x020,
66 TPM_INTF_LOCALITY_CHANGE_INT = 0x004,
67 TPM_INTF_STS_VALID_INT = 0x002,
68 TPM_INTF_DATA_AVAIL_INT = 0x001,
69};
70
71enum tis_defaults {
72 TIS_SHORT_TIMEOUT = 750,
73 TIS_LONG_TIMEOUT = 2000,
74};
75
76struct st33zp24_dev {
77 struct tpm_chip *chip;
78 void *phy_id;
79 const struct st33zp24_phy_ops *ops;
80 u32 intrs;
81 int io_lpcpd;
82};
83
84/*
85 * clear_interruption clear the pending interrupt.
86 * @param: tpm_dev, the tpm device device.
87 * @return: the interrupt status value.
88 */
89static u8 clear_interruption(struct st33zp24_dev *tpm_dev)
90{
91 u8 interrupt;
92
93 tpm_dev->ops->recv(tpm_dev->phy_id, TPM_INT_STATUS, &interrupt, 1);
94 tpm_dev->ops->send(tpm_dev->phy_id, TPM_INT_STATUS, &interrupt, 1);
95 return interrupt;
96} /* clear_interruption() */
97
98/*
99 * st33zp24_cancel, cancel the current command execution or
100 * set STS to COMMAND READY.
101 * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h
102 */
103static void st33zp24_cancel(struct tpm_chip *chip)
104{
105 struct st33zp24_dev *tpm_dev;
106 u8 data;
107
108 tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
109
110 data = TPM_STS_COMMAND_READY;
111 tpm_dev->ops->send(tpm_dev->phy_id, TPM_STS, &data, 1);
112} /* st33zp24_cancel() */
113
114/*
115 * st33zp24_status return the TPM_STS register
116 * @param: chip, the tpm chip description
117 * @return: the TPM_STS register value.
118 */
119static u8 st33zp24_status(struct tpm_chip *chip)
120{
121 struct st33zp24_dev *tpm_dev;
122 u8 data;
123
124 tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
125
126 tpm_dev->ops->recv(tpm_dev->phy_id, TPM_STS, &data, 1);
127 return data;
128} /* st33zp24_status() */
129
130/*
131 * check_locality if the locality is active
132 * @param: chip, the tpm chip description
133 * @return: the active locality or -EACCESS.
134 */
135static int check_locality(struct tpm_chip *chip)
136{
137 struct st33zp24_dev *tpm_dev;
138 u8 data;
139 u8 status;
140
141 tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
142
143 status = tpm_dev->ops->recv(tpm_dev->phy_id, TPM_ACCESS, &data, 1);
144 if (status && (data &
145 (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) ==
146 (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID))
147 return chip->vendor.locality;
148
149 return -EACCES;
150} /* check_locality() */
151
152/*
153 * request_locality request the TPM locality
154 * @param: chip, the chip description
155 * @return: the active locality or negative value.
156 */
157static int request_locality(struct tpm_chip *chip)
158{
159 unsigned long stop;
160 long ret;
161 struct st33zp24_dev *tpm_dev;
162 u8 data;
163
164 if (check_locality(chip) == chip->vendor.locality)
165 return chip->vendor.locality;
166
167 tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
168
169 data = TPM_ACCESS_REQUEST_USE;
170 ret = tpm_dev->ops->send(tpm_dev->phy_id, TPM_ACCESS, &data, 1);
171 if (ret < 0)
172 return ret;
173
174 stop = jiffies + chip->vendor.timeout_a;
175
176 /* Request locality is usually effective after the request */
177 do {
178 if (check_locality(chip) >= 0)
179 return chip->vendor.locality;
180 msleep(TPM_TIMEOUT);
181 } while (time_before(jiffies, stop));
182
183 /* could not get locality */
184 return -EACCES;
185} /* request_locality() */
186
187/*
188 * release_locality release the active locality
189 * @param: chip, the tpm chip description.
190 */
191static void release_locality(struct tpm_chip *chip)
192{
193 struct st33zp24_dev *tpm_dev;
194 u8 data;
195
196 tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
197 data = TPM_ACCESS_ACTIVE_LOCALITY;
198
199 tpm_dev->ops->send(tpm_dev->phy_id, TPM_ACCESS, &data, 1);
200}
201
202/*
203 * get_burstcount return the burstcount value
204 * @param: chip, the chip description
205 * return: the burstcount or negative value.
206 */
207static int get_burstcount(struct tpm_chip *chip)
208{
209 unsigned long stop;
210 int burstcnt, status;
211 u8 tpm_reg, temp;
212 struct st33zp24_dev *tpm_dev;
213
214 tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
215
216 stop = jiffies + chip->vendor.timeout_d;
217 do {
218 tpm_reg = TPM_STS + 1;
219 status = tpm_dev->ops->recv(tpm_dev->phy_id, tpm_reg, &temp, 1);
220 if (status < 0)
221 return -EBUSY;
222
223 tpm_reg = TPM_STS + 2;
224 burstcnt = temp;
225 status = tpm_dev->ops->recv(tpm_dev->phy_id, tpm_reg, &temp, 1);
226 if (status < 0)
227 return -EBUSY;
228
229 burstcnt |= temp << 8;
230 if (burstcnt)
231 return burstcnt;
232 msleep(TPM_TIMEOUT);
233 } while (time_before(jiffies, stop));
234 return -EBUSY;
235} /* get_burstcount() */
236
237
238/*
239 * wait_for_tpm_stat_cond
240 * @param: chip, chip description
241 * @param: mask, expected mask value
242 * @param: check_cancel, does the command expected to be canceled ?
243 * @param: canceled, did we received a cancel request ?
244 * @return: true if status == mask or if the command is canceled.
245 * false in other cases.
246 */
247static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask,
248 bool check_cancel, bool *canceled)
249{
250 u8 status = chip->ops->status(chip);
251
252 *canceled = false;
253 if ((status & mask) == mask)
254 return true;
255 if (check_cancel && chip->ops->req_canceled(chip, status)) {
256 *canceled = true;
257 return true;
258 }
259 return false;
260}
261
262/*
263 * wait_for_stat wait for a TPM_STS value
264 * @param: chip, the tpm chip description
265 * @param: mask, the value mask to wait
266 * @param: timeout, the timeout
267 * @param: queue, the wait queue.
268 * @param: check_cancel, does the command can be cancelled ?
269 * @return: the tpm status, 0 if success, -ETIME if timeout is reached.
270 */
271static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
272 wait_queue_head_t *queue, bool check_cancel)
273{
274 unsigned long stop;
275 int ret = 0;
276 bool canceled = false;
277 bool condition;
278 u32 cur_intrs;
279 u8 status;
280 struct st33zp24_dev *tpm_dev;
281
282 tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
283
284 /* check current status */
285 status = st33zp24_status(chip);
286 if ((status & mask) == mask)
287 return 0;
288
289 stop = jiffies + timeout;
290
291 if (chip->vendor.irq) {
292 cur_intrs = tpm_dev->intrs;
293 clear_interruption(tpm_dev);
294 enable_irq(chip->vendor.irq);
295
296 do {
297 if (ret == -ERESTARTSYS && freezing(current))
298 clear_thread_flag(TIF_SIGPENDING);
299
300 timeout = stop - jiffies;
301 if ((long) timeout <= 0)
302 return -1;
303
304 ret = wait_event_interruptible_timeout(*queue,
305 cur_intrs != tpm_dev->intrs,
306 timeout);
307 clear_interruption(tpm_dev);
308 condition = wait_for_tpm_stat_cond(chip, mask,
309 check_cancel, &canceled);
310 if (ret >= 0 && condition) {
311 if (canceled)
312 return -ECANCELED;
313 return 0;
314 }
315 } while (ret == -ERESTARTSYS && freezing(current));
316
317 disable_irq_nosync(chip->vendor.irq);
318
319 } else {
320 do {
321 msleep(TPM_TIMEOUT);
322 status = chip->ops->status(chip);
323 if ((status & mask) == mask)
324 return 0;
325 } while (time_before(jiffies, stop));
326 }
327
328 return -ETIME;
329} /* wait_for_stat() */
330
331/*
332 * recv_data receive data
333 * @param: chip, the tpm chip description
334 * @param: buf, the buffer where the data are received
335 * @param: count, the number of data to receive
336 * @return: the number of bytes read from TPM FIFO.
337 */
338static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
339{
340 int size = 0, burstcnt, len, ret;
341 struct st33zp24_dev *tpm_dev;
342
343 tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
344
345 while (size < count &&
346 wait_for_stat(chip,
347 TPM_STS_DATA_AVAIL | TPM_STS_VALID,
348 chip->vendor.timeout_c,
349 &chip->vendor.read_queue, true) == 0) {
350 burstcnt = get_burstcount(chip);
351 if (burstcnt < 0)
352 return burstcnt;
353 len = min_t(int, burstcnt, count - size);
354 ret = tpm_dev->ops->recv(tpm_dev->phy_id, TPM_DATA_FIFO,
355 buf + size, len);
356 if (ret < 0)
357 return ret;
358
359 size += len;
360 }
361 return size;
362}
363
364/*
365 * tpm_ioserirq_handler the serirq irq handler
366 * @param: irq, the tpm chip description
367 * @param: dev_id, the description of the chip
368 * @return: the status of the handler.
369 */
370static irqreturn_t tpm_ioserirq_handler(int irq, void *dev_id)
371{
372 struct tpm_chip *chip = dev_id;
373 struct st33zp24_dev *tpm_dev;
374
375 tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
376
377 tpm_dev->intrs++;
378 wake_up_interruptible(&chip->vendor.read_queue);
379 disable_irq_nosync(chip->vendor.irq);
380
381 return IRQ_HANDLED;
382} /* tpm_ioserirq_handler() */
383
384/*
385 * st33zp24_send send TPM commands through the I2C bus.
386 *
387 * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h
388 * @param: buf, the buffer to send.
389 * @param: count, the number of bytes to send.
390 * @return: In case of success the number of bytes sent.
391 * In other case, a < 0 value describing the issue.
392 */
393static int st33zp24_send(struct tpm_chip *chip, unsigned char *buf,
394 size_t len)
395{
396 u32 status, i, size, ordinal;
397 int burstcnt = 0;
398 int ret;
399 u8 data;
400 struct st33zp24_dev *tpm_dev;
401
402 if (!chip)
403 return -EBUSY;
404 if (len < TPM_HEADER_SIZE)
405 return -EBUSY;
406
407 tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
408
409 ret = request_locality(chip);
410 if (ret < 0)
411 return ret;
412
413 status = st33zp24_status(chip);
414 if ((status & TPM_STS_COMMAND_READY) == 0) {
415 st33zp24_cancel(chip);
416 if (wait_for_stat
417 (chip, TPM_STS_COMMAND_READY, chip->vendor.timeout_b,
418 &chip->vendor.read_queue, false) < 0) {
419 ret = -ETIME;
420 goto out_err;
421 }
422 }
423
424 for (i = 0; i < len - 1;) {
425 burstcnt = get_burstcount(chip);
426 if (burstcnt < 0)
427 return burstcnt;
428 size = min_t(int, len - i - 1, burstcnt);
429 ret = tpm_dev->ops->send(tpm_dev->phy_id, TPM_DATA_FIFO,
430 buf + i, size);
431 if (ret < 0)
432 goto out_err;
433
434 i += size;
435 }
436
437 status = st33zp24_status(chip);
438 if ((status & TPM_STS_DATA_EXPECT) == 0) {
439 ret = -EIO;
440 goto out_err;
441 }
442
443 ret = tpm_dev->ops->send(tpm_dev->phy_id, TPM_DATA_FIFO,
444 buf + len - 1, 1);
445 if (ret < 0)
446 goto out_err;
447
448 status = st33zp24_status(chip);
449 if ((status & TPM_STS_DATA_EXPECT) != 0) {
450 ret = -EIO;
451 goto out_err;
452 }
453
454 data = TPM_STS_GO;
455 ret = tpm_dev->ops->send(tpm_dev->phy_id, TPM_STS, &data, 1);
456 if (ret < 0)
457 goto out_err;
458
459 if (chip->vendor.irq) {
460 ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
461
462 ret = wait_for_stat(chip, TPM_STS_DATA_AVAIL | TPM_STS_VALID,
463 tpm_calc_ordinal_duration(chip, ordinal),
464 &chip->vendor.read_queue, false);
465 if (ret < 0)
466 goto out_err;
467 }
468
469 return len;
470out_err:
471 st33zp24_cancel(chip);
472 release_locality(chip);
473 return ret;
474}
475
476/*
477 * st33zp24_recv received TPM response through TPM phy.
478 * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h.
479 * @param: buf, the buffer to store datas.
480 * @param: count, the number of bytes to send.
481 * @return: In case of success the number of bytes received.
482 * In other case, a < 0 value describing the issue.
483 */
484static int st33zp24_recv(struct tpm_chip *chip, unsigned char *buf,
485 size_t count)
486{
487 int size = 0;
488 int expected;
489
490 if (!chip)
491 return -EBUSY;
492
493 if (count < TPM_HEADER_SIZE) {
494 size = -EIO;
495 goto out;
496 }
497
498 size = recv_data(chip, buf, TPM_HEADER_SIZE);
499 if (size < TPM_HEADER_SIZE) {
500 dev_err(&chip->dev, "Unable to read header\n");
501 goto out;
502 }
503
504 expected = be32_to_cpu(*(__be32 *)(buf + 2));
505 if (expected > count) {
506 size = -EIO;
507 goto out;
508 }
509
510 size += recv_data(chip, &buf[TPM_HEADER_SIZE],
511 expected - TPM_HEADER_SIZE);
512 if (size < expected) {
513 dev_err(&chip->dev, "Unable to read remainder of result\n");
514 size = -ETIME;
515 }
516
517out:
518 st33zp24_cancel(chip);
519 release_locality(chip);
520 return size;
521}
522
523/*
524 * st33zp24_req_canceled
525 * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h.
526 * @param: status, the TPM status.
527 * @return: Does TPM ready to compute a new command ? true.
528 */
529static bool st33zp24_req_canceled(struct tpm_chip *chip, u8 status)
530{
531 return (status == TPM_STS_COMMAND_READY);
532}
533
534static const struct tpm_class_ops st33zp24_tpm = {
535 .send = st33zp24_send,
536 .recv = st33zp24_recv,
537 .cancel = st33zp24_cancel,
538 .status = st33zp24_status,
539 .req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
540 .req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
541 .req_canceled = st33zp24_req_canceled,
542};
543
544/*
545 * st33zp24_probe initialize the TPM device
546 * @param: client, the i2c_client drescription (TPM I2C description).
547 * @param: id, the i2c_device_id struct.
548 * @return: 0 in case of success.
549 * -1 in other case.
550 */
551int st33zp24_probe(void *phy_id, const struct st33zp24_phy_ops *ops,
552 struct device *dev, int irq, int io_lpcpd)
553{
554 int ret;
555 u8 intmask = 0;
556 struct tpm_chip *chip;
557 struct st33zp24_dev *tpm_dev;
558
559 chip = tpmm_chip_alloc(dev, &st33zp24_tpm);
560 if (IS_ERR(chip))
561 return PTR_ERR(chip);
562
563 tpm_dev = devm_kzalloc(dev, sizeof(struct st33zp24_dev),
564 GFP_KERNEL);
565 if (!tpm_dev)
566 return -ENOMEM;
567
568 TPM_VPRIV(chip) = tpm_dev;
569 tpm_dev->phy_id = phy_id;
570 tpm_dev->ops = ops;
571
572 chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
573 chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
574 chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
575 chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
576
577 chip->vendor.locality = LOCALITY0;
578
579 if (irq) {
580 /* INTERRUPT Setup */
581 init_waitqueue_head(&chip->vendor.read_queue);
582 tpm_dev->intrs = 0;
583
584 if (request_locality(chip) != LOCALITY0) {
585 ret = -ENODEV;
586 goto _tpm_clean_answer;
587 }
588
589 clear_interruption(tpm_dev);
590 ret = devm_request_irq(dev, irq, tpm_ioserirq_handler,
591 IRQF_TRIGGER_HIGH, "TPM SERIRQ management",
592 chip);
593 if (ret < 0) {
594 dev_err(&chip->dev, "TPM SERIRQ signals %d not available\n",
595 irq);
596 goto _tpm_clean_answer;
597 }
598
599 intmask |= TPM_INTF_CMD_READY_INT
600 | TPM_INTF_STS_VALID_INT
601 | TPM_INTF_DATA_AVAIL_INT;
602
603 ret = tpm_dev->ops->send(tpm_dev->phy_id, TPM_INT_ENABLE,
604 &intmask, 1);
605 if (ret < 0)
606 goto _tpm_clean_answer;
607
608 intmask = TPM_GLOBAL_INT_ENABLE;
609 ret = tpm_dev->ops->send(tpm_dev->phy_id, (TPM_INT_ENABLE + 3),
610 &intmask, 1);
611 if (ret < 0)
612 goto _tpm_clean_answer;
613
614 chip->vendor.irq = irq;
615
616 disable_irq_nosync(chip->vendor.irq);
617
618 tpm_gen_interrupt(chip);
619 }
620
621 tpm_get_timeouts(chip);
622 tpm_do_selftest(chip);
623
624 return tpm_chip_register(chip);
625_tpm_clean_answer:
626 dev_info(&chip->dev, "TPM initialization fail\n");
627 return ret;
628}
629EXPORT_SYMBOL(st33zp24_probe);
630
631/*
632 * st33zp24_remove remove the TPM device
633 * @param: tpm_data, the tpm phy.
634 * @return: 0 in case of success.
635 */
636int st33zp24_remove(struct tpm_chip *chip)
637{
638 tpm_chip_unregister(chip);
639 return 0;
640}
641EXPORT_SYMBOL(st33zp24_remove);
642
643#ifdef CONFIG_PM_SLEEP
644/*
645 * st33zp24_pm_suspend suspend the TPM device
646 * @param: tpm_data, the tpm phy.
647 * @param: mesg, the power management message.
648 * @return: 0 in case of success.
649 */
650int st33zp24_pm_suspend(struct device *dev)
651{
652 struct tpm_chip *chip = dev_get_drvdata(dev);
653 struct st33zp24_dev *tpm_dev;
654 int ret = 0;
655
656 tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
657
658 if (gpio_is_valid(tpm_dev->io_lpcpd))
659 gpio_set_value(tpm_dev->io_lpcpd, 0);
660 else
661 ret = tpm_pm_suspend(dev);
662
663 return ret;
664} /* st33zp24_pm_suspend() */
665EXPORT_SYMBOL(st33zp24_pm_suspend);
666
667/*
668 * st33zp24_pm_resume resume the TPM device
669 * @param: tpm_data, the tpm phy.
670 * @return: 0 in case of success.
671 */
672int st33zp24_pm_resume(struct device *dev)
673{
674 struct tpm_chip *chip = dev_get_drvdata(dev);
675 struct st33zp24_dev *tpm_dev;
676 int ret = 0;
677
678 tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip);
679
680 if (gpio_is_valid(tpm_dev->io_lpcpd)) {
681 gpio_set_value(tpm_dev->io_lpcpd, 1);
682 ret = wait_for_stat(chip,
683 TPM_STS_VALID, chip->vendor.timeout_b,
684 &chip->vendor.read_queue, false);
685 } else {
686 ret = tpm_pm_resume(dev);
687 if (!ret)
688 tpm_do_selftest(chip);
689 }
690 return ret;
691} /* st33zp24_pm_resume() */
692EXPORT_SYMBOL(st33zp24_pm_resume);
693#endif
694
695MODULE_AUTHOR("TPM support (TPMsupport@list.st.com)");
696MODULE_DESCRIPTION("ST33ZP24 TPM 1.2 driver");
697MODULE_VERSION("1.3.0");
698MODULE_LICENSE("GPL");
diff --git a/drivers/char/tpm/st33zp24/st33zp24.h b/drivers/char/tpm/st33zp24/st33zp24.h
new file mode 100644
index 000000000000..c207cebf67dd
--- /dev/null
+++ b/drivers/char/tpm/st33zp24/st33zp24.h
@@ -0,0 +1,37 @@
1/*
2 * STMicroelectronics TPM Linux driver for TPM ST33ZP24
3 * Copyright (C) 2009 - 2015 STMicroelectronics
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms and conditions of the GNU General Public License,
7 * version 2, as published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, see <http://www.gnu.org/licenses/>.
16 */
17
18#ifndef __LOCAL_ST33ZP24_H__
19#define __LOCAL_ST33ZP24_H__
20
21#define TPM_WRITE_DIRECTION 0x80
22#define TPM_BUFSIZE 2048
23
24struct st33zp24_phy_ops {
25 int (*send)(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size);
26 int (*recv)(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size);
27};
28
29#ifdef CONFIG_PM_SLEEP
30int st33zp24_pm_suspend(struct device *dev);
31int st33zp24_pm_resume(struct device *dev);
32#endif
33
34int st33zp24_probe(void *phy_id, const struct st33zp24_phy_ops *ops,
35 struct device *dev, int irq, int io_lpcpd);
36int st33zp24_remove(struct tpm_chip *chip);
37#endif /* __LOCAL_ST33ZP24_H__ */
diff --git a/drivers/char/tpm/tpm-chip.c b/drivers/char/tpm/tpm-chip.c
index 1d278ccd751f..283f00a7f036 100644
--- a/drivers/char/tpm/tpm-chip.c
+++ b/drivers/char/tpm/tpm-chip.c
@@ -140,24 +140,24 @@ static int tpm_dev_add_device(struct tpm_chip *chip)
140{ 140{
141 int rc; 141 int rc;
142 142
143 rc = device_add(&chip->dev); 143 rc = cdev_add(&chip->cdev, chip->dev.devt, 1);
144 if (rc) { 144 if (rc) {
145 dev_err(&chip->dev, 145 dev_err(&chip->dev,
146 "unable to device_register() %s, major %d, minor %d, err=%d\n", 146 "unable to cdev_add() %s, major %d, minor %d, err=%d\n",
147 chip->devname, MAJOR(chip->dev.devt), 147 chip->devname, MAJOR(chip->dev.devt),
148 MINOR(chip->dev.devt), rc); 148 MINOR(chip->dev.devt), rc);
149 149
150 device_unregister(&chip->dev);
150 return rc; 151 return rc;
151 } 152 }
152 153
153 rc = cdev_add(&chip->cdev, chip->dev.devt, 1); 154 rc = device_add(&chip->dev);
154 if (rc) { 155 if (rc) {
155 dev_err(&chip->dev, 156 dev_err(&chip->dev,
156 "unable to cdev_add() %s, major %d, minor %d, err=%d\n", 157 "unable to device_register() %s, major %d, minor %d, err=%d\n",
157 chip->devname, MAJOR(chip->dev.devt), 158 chip->devname, MAJOR(chip->dev.devt),
158 MINOR(chip->dev.devt), rc); 159 MINOR(chip->dev.devt), rc);
159 160
160 device_unregister(&chip->dev);
161 return rc; 161 return rc;
162 } 162 }
163 163
@@ -170,43 +170,63 @@ static void tpm_dev_del_device(struct tpm_chip *chip)
170 device_unregister(&chip->dev); 170 device_unregister(&chip->dev);
171} 171}
172 172
173static int tpm1_chip_register(struct tpm_chip *chip)
174{
175 int rc;
176
177 if (chip->flags & TPM_CHIP_FLAG_TPM2)
178 return 0;
179
180 rc = tpm_sysfs_add_device(chip);
181 if (rc)
182 return rc;
183
184 rc = tpm_add_ppi(chip);
185 if (rc) {
186 tpm_sysfs_del_device(chip);
187 return rc;
188 }
189
190 chip->bios_dir = tpm_bios_log_setup(chip->devname);
191
192 return 0;
193}
194
195static void tpm1_chip_unregister(struct tpm_chip *chip)
196{
197 if (chip->flags & TPM_CHIP_FLAG_TPM2)
198 return;
199
200 if (chip->bios_dir)
201 tpm_bios_log_teardown(chip->bios_dir);
202
203 tpm_remove_ppi(chip);
204
205 tpm_sysfs_del_device(chip);
206}
207
173/* 208/*
174 * tpm_chip_register() - create a character device for the TPM chip 209 * tpm_chip_register() - create a character device for the TPM chip
175 * @chip: TPM chip to use. 210 * @chip: TPM chip to use.
176 * 211 *
177 * Creates a character device for the TPM chip and adds sysfs interfaces for 212 * Creates a character device for the TPM chip and adds sysfs attributes for
178 * the device, PPI and TCPA. As the last step this function adds the 213 * the device. As the last step this function adds the chip to the list of TPM
179 * chip to the list of TPM chips available for use. 214 * chips available for in-kernel use.
180 *
181 * NOTE: This function should be only called after the chip initialization
182 * is complete.
183 * 215 *
184 * Called from tpm_<specific>.c probe function only for devices 216 * This function should be only called after the chip initialization is
185 * the driver has determined it should claim. Prior to calling 217 * complete.
186 * this function the specific probe function has called pci_enable_device
187 * upon errant exit from this function specific probe function should call
188 * pci_disable_device
189 */ 218 */
190int tpm_chip_register(struct tpm_chip *chip) 219int tpm_chip_register(struct tpm_chip *chip)
191{ 220{
192 int rc; 221 int rc;
193 222
194 rc = tpm_dev_add_device(chip); 223 rc = tpm1_chip_register(chip);
195 if (rc) 224 if (rc)
196 return rc; 225 return rc;
197 226
198 /* Populate sysfs for TPM1 devices. */ 227 rc = tpm_dev_add_device(chip);
199 if (!(chip->flags & TPM_CHIP_FLAG_TPM2)) { 228 if (rc)
200 rc = tpm_sysfs_add_device(chip); 229 goto out_err;
201 if (rc)
202 goto del_misc;
203
204 rc = tpm_add_ppi(chip);
205 if (rc)
206 goto del_sysfs;
207
208 chip->bios_dir = tpm_bios_log_setup(chip->devname);
209 }
210 230
211 /* Make the chip available. */ 231 /* Make the chip available. */
212 spin_lock(&driver_lock); 232 spin_lock(&driver_lock);
@@ -216,10 +236,8 @@ int tpm_chip_register(struct tpm_chip *chip)
216 chip->flags |= TPM_CHIP_FLAG_REGISTERED; 236 chip->flags |= TPM_CHIP_FLAG_REGISTERED;
217 237
218 return 0; 238 return 0;
219del_sysfs: 239out_err:
220 tpm_sysfs_del_device(chip); 240 tpm1_chip_unregister(chip);
221del_misc:
222 tpm_dev_del_device(chip);
223 return rc; 241 return rc;
224} 242}
225EXPORT_SYMBOL_GPL(tpm_chip_register); 243EXPORT_SYMBOL_GPL(tpm_chip_register);
@@ -244,13 +262,7 @@ void tpm_chip_unregister(struct tpm_chip *chip)
244 spin_unlock(&driver_lock); 262 spin_unlock(&driver_lock);
245 synchronize_rcu(); 263 synchronize_rcu();
246 264
247 if (!(chip->flags & TPM_CHIP_FLAG_TPM2)) { 265 tpm1_chip_unregister(chip);
248 if (chip->bios_dir)
249 tpm_bios_log_teardown(chip->bios_dir);
250 tpm_remove_ppi(chip);
251 tpm_sysfs_del_device(chip);
252 }
253
254 tpm_dev_del_device(chip); 266 tpm_dev_del_device(chip);
255} 267}
256EXPORT_SYMBOL_GPL(tpm_chip_unregister); 268EXPORT_SYMBOL_GPL(tpm_chip_unregister);
diff --git a/drivers/char/tpm/tpm_i2c_stm_st33.c b/drivers/char/tpm/tpm_i2c_stm_st33.c
deleted file mode 100644
index 612845b36c29..000000000000
--- a/drivers/char/tpm/tpm_i2c_stm_st33.c
+++ /dev/null
@@ -1,911 +0,0 @@
1/*
2 * STMicroelectronics TPM I2C Linux driver for TPM ST33ZP24
3 * Copyright (C) 2009, 2010, 2014 STMicroelectronics
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, see <http://www.gnu.org/licenses/>.
17 *
18 * STMicroelectronics version 1.2.1, Copyright (C) 2014
19 * STMicroelectronics comes with ABSOLUTELY NO WARRANTY.
20 * This is free software, and you are welcome to redistribute it
21 * under certain conditions.
22 *
23 * @Author: Christophe RICARD tpmsupport@st.com
24 *
25 * @File: tpm_stm_st33_i2c.c
26 *
27 * @Synopsis:
28 * 09/15/2010: First shot driver tpm_tis driver for
29 * lpc is used as model.
30 */
31
32#include <linux/pci.h>
33#include <linux/module.h>
34#include <linux/platform_device.h>
35#include <linux/i2c.h>
36#include <linux/fs.h>
37#include <linux/miscdevice.h>
38#include <linux/kernel.h>
39#include <linux/delay.h>
40#include <linux/wait.h>
41#include <linux/freezer.h>
42#include <linux/string.h>
43#include <linux/interrupt.h>
44#include <linux/sysfs.h>
45#include <linux/gpio.h>
46#include <linux/sched.h>
47#include <linux/uaccess.h>
48#include <linux/io.h>
49#include <linux/slab.h>
50#include <linux/of_irq.h>
51#include <linux/of_gpio.h>
52
53#include <linux/platform_data/tpm_stm_st33.h>
54#include "tpm.h"
55
56#define TPM_ACCESS 0x0
57#define TPM_STS 0x18
58#define TPM_HASH_END 0x20
59#define TPM_DATA_FIFO 0x24
60#define TPM_HASH_DATA 0x24
61#define TPM_HASH_START 0x28
62#define TPM_INTF_CAPABILITY 0x14
63#define TPM_INT_STATUS 0x10
64#define TPM_INT_ENABLE 0x08
65
66#define TPM_DUMMY_BYTE 0xAA
67#define TPM_WRITE_DIRECTION 0x80
68#define TPM_HEADER_SIZE 10
69#define TPM_BUFSIZE 2048
70
71#define LOCALITY0 0
72
73
74enum stm33zp24_access {
75 TPM_ACCESS_VALID = 0x80,
76 TPM_ACCESS_ACTIVE_LOCALITY = 0x20,
77 TPM_ACCESS_REQUEST_PENDING = 0x04,
78 TPM_ACCESS_REQUEST_USE = 0x02,
79};
80
81enum stm33zp24_status {
82 TPM_STS_VALID = 0x80,
83 TPM_STS_COMMAND_READY = 0x40,
84 TPM_STS_GO = 0x20,
85 TPM_STS_DATA_AVAIL = 0x10,
86 TPM_STS_DATA_EXPECT = 0x08,
87};
88
89enum stm33zp24_int_flags {
90 TPM_GLOBAL_INT_ENABLE = 0x80,
91 TPM_INTF_CMD_READY_INT = 0x080,
92 TPM_INTF_FIFO_AVALAIBLE_INT = 0x040,
93 TPM_INTF_WAKE_UP_READY_INT = 0x020,
94 TPM_INTF_LOCALITY_CHANGE_INT = 0x004,
95 TPM_INTF_STS_VALID_INT = 0x002,
96 TPM_INTF_DATA_AVAIL_INT = 0x001,
97};
98
99enum tis_defaults {
100 TIS_SHORT_TIMEOUT = 750,
101 TIS_LONG_TIMEOUT = 2000,
102};
103
104struct tpm_stm_dev {
105 struct i2c_client *client;
106 struct tpm_chip *chip;
107 u8 buf[TPM_BUFSIZE + 1];
108 u32 intrs;
109 int io_lpcpd;
110};
111
112/*
113 * write8_reg
114 * Send byte to the TIS register according to the ST33ZP24 I2C protocol.
115 * @param: tpm_register, the tpm tis register where the data should be written
116 * @param: tpm_data, the tpm_data to write inside the tpm_register
117 * @param: tpm_size, The length of the data
118 * @return: Returns negative errno, or else the number of bytes written.
119 */
120static int write8_reg(struct tpm_stm_dev *tpm_dev, u8 tpm_register,
121 u8 *tpm_data, u16 tpm_size)
122{
123 tpm_dev->buf[0] = tpm_register;
124 memcpy(tpm_dev->buf + 1, tpm_data, tpm_size);
125 return i2c_master_send(tpm_dev->client, tpm_dev->buf, tpm_size + 1);
126} /* write8_reg() */
127
128/*
129 * read8_reg
130 * Recv byte from the TIS register according to the ST33ZP24 I2C protocol.
131 * @param: tpm_register, the tpm tis register where the data should be read
132 * @param: tpm_data, the TPM response
133 * @param: tpm_size, tpm TPM response size to read.
134 * @return: number of byte read successfully: should be one if success.
135 */
136static int read8_reg(struct tpm_stm_dev *tpm_dev, u8 tpm_register,
137 u8 *tpm_data, int tpm_size)
138{
139 u8 status = 0;
140 u8 data;
141
142 data = TPM_DUMMY_BYTE;
143 status = write8_reg(tpm_dev, tpm_register, &data, 1);
144 if (status == 2)
145 status = i2c_master_recv(tpm_dev->client, tpm_data, tpm_size);
146 return status;
147} /* read8_reg() */
148
149/*
150 * I2C_WRITE_DATA
151 * Send byte to the TIS register according to the ST33ZP24 I2C protocol.
152 * @param: tpm_dev, the chip description
153 * @param: tpm_register, the tpm tis register where the data should be written
154 * @param: tpm_data, the tpm_data to write inside the tpm_register
155 * @param: tpm_size, The length of the data
156 * @return: number of byte written successfully: should be one if success.
157 */
158#define I2C_WRITE_DATA(tpm_dev, tpm_register, tpm_data, tpm_size) \
159 (write8_reg(tpm_dev, tpm_register | \
160 TPM_WRITE_DIRECTION, tpm_data, tpm_size))
161
162/*
163 * I2C_READ_DATA
164 * Recv byte from the TIS register according to the ST33ZP24 I2C protocol.
165 * @param: tpm_dev, the chip description
166 * @param: tpm_register, the tpm tis register where the data should be read
167 * @param: tpm_data, the TPM response
168 * @param: tpm_size, tpm TPM response size to read.
169 * @return: number of byte read successfully: should be one if success.
170 */
171#define I2C_READ_DATA(tpm_dev, tpm_register, tpm_data, tpm_size) \
172 (read8_reg(tpm_dev, tpm_register, tpm_data, tpm_size))
173
174/*
175 * clear_interruption
176 * clear the TPM interrupt register.
177 * @param: tpm, the chip description
178 * @return: the TPM_INT_STATUS value
179 */
180static u8 clear_interruption(struct tpm_stm_dev *tpm_dev)
181{
182 u8 interrupt;
183
184 I2C_READ_DATA(tpm_dev, TPM_INT_STATUS, &interrupt, 1);
185 I2C_WRITE_DATA(tpm_dev, TPM_INT_STATUS, &interrupt, 1);
186 return interrupt;
187} /* clear_interruption() */
188
189/*
190 * tpm_stm_i2c_cancel, cancel is not implemented.
191 * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h
192 */
193static void tpm_stm_i2c_cancel(struct tpm_chip *chip)
194{
195 struct tpm_stm_dev *tpm_dev;
196 u8 data;
197
198 tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
199
200 data = TPM_STS_COMMAND_READY;
201 I2C_WRITE_DATA(tpm_dev, TPM_STS, &data, 1);
202} /* tpm_stm_i2c_cancel() */
203
204/*
205 * tpm_stm_spi_status return the TPM_STS register
206 * @param: chip, the tpm chip description
207 * @return: the TPM_STS register value.
208 */
209static u8 tpm_stm_i2c_status(struct tpm_chip *chip)
210{
211 struct tpm_stm_dev *tpm_dev;
212 u8 data;
213
214 tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
215
216 I2C_READ_DATA(tpm_dev, TPM_STS, &data, 1);
217 return data;
218} /* tpm_stm_i2c_status() */
219
220
221/*
222 * check_locality if the locality is active
223 * @param: chip, the tpm chip description
224 * @return: the active locality or -EACCESS.
225 */
226static int check_locality(struct tpm_chip *chip)
227{
228 struct tpm_stm_dev *tpm_dev;
229 u8 data;
230 u8 status;
231
232 tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
233
234 status = I2C_READ_DATA(tpm_dev, TPM_ACCESS, &data, 1);
235 if (status && (data &
236 (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) ==
237 (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID))
238 return chip->vendor.locality;
239
240 return -EACCES;
241} /* check_locality() */
242
243/*
244 * request_locality request the TPM locality
245 * @param: chip, the chip description
246 * @return: the active locality or EACCESS.
247 */
248static int request_locality(struct tpm_chip *chip)
249{
250 unsigned long stop;
251 long ret;
252 struct tpm_stm_dev *tpm_dev;
253 u8 data;
254
255 if (check_locality(chip) == chip->vendor.locality)
256 return chip->vendor.locality;
257
258 tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
259
260 data = TPM_ACCESS_REQUEST_USE;
261 ret = I2C_WRITE_DATA(tpm_dev, TPM_ACCESS, &data, 1);
262 if (ret < 0)
263 goto end;
264
265 stop = jiffies + chip->vendor.timeout_a;
266
267 /* Request locality is usually effective after the request */
268 do {
269 if (check_locality(chip) >= 0)
270 return chip->vendor.locality;
271 msleep(TPM_TIMEOUT);
272 } while (time_before(jiffies, stop));
273 ret = -EACCES;
274end:
275 return ret;
276} /* request_locality() */
277
278/*
279 * release_locality release the active locality
280 * @param: chip, the tpm chip description.
281 */
282static void release_locality(struct tpm_chip *chip)
283{
284 struct tpm_stm_dev *tpm_dev;
285 u8 data;
286
287 tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
288 data = TPM_ACCESS_ACTIVE_LOCALITY;
289
290 I2C_WRITE_DATA(tpm_dev, TPM_ACCESS, &data, 1);
291}
292
293/*
294 * get_burstcount return the burstcount address 0x19 0x1A
295 * @param: chip, the chip description
296 * return: the burstcount.
297 */
298static int get_burstcount(struct tpm_chip *chip)
299{
300 unsigned long stop;
301 int burstcnt, status;
302 u8 tpm_reg, temp;
303 struct tpm_stm_dev *tpm_dev;
304
305 tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
306
307 stop = jiffies + chip->vendor.timeout_d;
308 do {
309 tpm_reg = TPM_STS + 1;
310 status = I2C_READ_DATA(tpm_dev, tpm_reg, &temp, 1);
311 if (status < 0)
312 goto end;
313
314 tpm_reg = tpm_reg + 1;
315 burstcnt = temp;
316 status = I2C_READ_DATA(tpm_dev, tpm_reg, &temp, 1);
317 if (status < 0)
318 goto end;
319
320 burstcnt |= temp << 8;
321 if (burstcnt)
322 return burstcnt;
323 msleep(TPM_TIMEOUT);
324 } while (time_before(jiffies, stop));
325
326end:
327 return -EBUSY;
328} /* get_burstcount() */
329
330static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask,
331 bool check_cancel, bool *canceled)
332{
333 u8 status = chip->ops->status(chip);
334
335 *canceled = false;
336 if ((status & mask) == mask)
337 return true;
338 if (check_cancel && chip->ops->req_canceled(chip, status)) {
339 *canceled = true;
340 return true;
341 }
342 return false;
343}
344
345/*
346 * interrupt_to_status
347 * @param: irq_mask, the irq mask value to wait
348 * @return: the corresponding tpm_sts value
349 */
350static u8 interrupt_to_status(u8 irq_mask)
351{
352 u8 status = 0;
353
354 if ((irq_mask & TPM_INTF_STS_VALID_INT) == TPM_INTF_STS_VALID_INT)
355 status |= TPM_STS_VALID;
356 if ((irq_mask & TPM_INTF_DATA_AVAIL_INT) == TPM_INTF_DATA_AVAIL_INT)
357 status |= TPM_STS_DATA_AVAIL;
358 if ((irq_mask & TPM_INTF_CMD_READY_INT) == TPM_INTF_CMD_READY_INT)
359 status |= TPM_STS_COMMAND_READY;
360
361 return status;
362} /* status_to_interrupt() */
363
364/*
365 * wait_for_stat wait for a TPM_STS value
366 * @param: chip, the tpm chip description
367 * @param: mask, the value mask to wait
368 * @param: timeout, the timeout
369 * @param: queue, the wait queue.
370 * @param: check_cancel, does the command can be cancelled ?
371 * @return: the tpm status, 0 if success, -ETIME if timeout is reached.
372 */
373static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
374 wait_queue_head_t *queue, bool check_cancel)
375{
376 unsigned long stop;
377 int ret;
378 bool canceled = false;
379 bool condition;
380 u32 cur_intrs;
381 u8 interrupt, status;
382 struct tpm_stm_dev *tpm_dev;
383
384 tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
385
386 /* check current status */
387 status = tpm_stm_i2c_status(chip);
388 if ((status & mask) == mask)
389 return 0;
390
391 stop = jiffies + timeout;
392
393 if (chip->vendor.irq) {
394 cur_intrs = tpm_dev->intrs;
395 interrupt = clear_interruption(tpm_dev);
396 enable_irq(chip->vendor.irq);
397
398again:
399 timeout = stop - jiffies;
400 if ((long) timeout <= 0)
401 return -1;
402
403 ret = wait_event_interruptible_timeout(*queue,
404 cur_intrs != tpm_dev->intrs, timeout);
405
406 interrupt |= clear_interruption(tpm_dev);
407 status = interrupt_to_status(interrupt);
408 condition = wait_for_tpm_stat_cond(chip, mask,
409 check_cancel, &canceled);
410
411 if (ret >= 0 && condition) {
412 if (canceled)
413 return -ECANCELED;
414 return 0;
415 }
416 if (ret == -ERESTARTSYS && freezing(current)) {
417 clear_thread_flag(TIF_SIGPENDING);
418 goto again;
419 }
420 disable_irq_nosync(chip->vendor.irq);
421
422 } else {
423 do {
424 msleep(TPM_TIMEOUT);
425 status = chip->ops->status(chip);
426 if ((status & mask) == mask)
427 return 0;
428 } while (time_before(jiffies, stop));
429 }
430
431 return -ETIME;
432} /* wait_for_stat() */
433
434/*
435 * recv_data receive data
436 * @param: chip, the tpm chip description
437 * @param: buf, the buffer where the data are received
438 * @param: count, the number of data to receive
439 * @return: the number of bytes read from TPM FIFO.
440 */
441static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
442{
443 int size = 0, burstcnt, len, ret;
444 struct tpm_stm_dev *tpm_dev;
445
446 tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
447
448 while (size < count &&
449 wait_for_stat(chip,
450 TPM_STS_DATA_AVAIL | TPM_STS_VALID,
451 chip->vendor.timeout_c,
452 &chip->vendor.read_queue, true) == 0) {
453 burstcnt = get_burstcount(chip);
454 if (burstcnt < 0)
455 return burstcnt;
456 len = min_t(int, burstcnt, count - size);
457 ret = I2C_READ_DATA(tpm_dev, TPM_DATA_FIFO, buf + size, len);
458 if (ret < 0)
459 return ret;
460
461 size += len;
462 }
463 return size;
464}
465
466/*
467 * tpm_ioserirq_handler the serirq irq handler
468 * @param: irq, the tpm chip description
469 * @param: dev_id, the description of the chip
470 * @return: the status of the handler.
471 */
472static irqreturn_t tpm_ioserirq_handler(int irq, void *dev_id)
473{
474 struct tpm_chip *chip = dev_id;
475 struct tpm_stm_dev *tpm_dev;
476
477 tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
478
479 tpm_dev->intrs++;
480 wake_up_interruptible(&chip->vendor.read_queue);
481 disable_irq_nosync(chip->vendor.irq);
482
483 return IRQ_HANDLED;
484} /* tpm_ioserirq_handler() */
485
486
487/*
488 * tpm_stm_i2c_send send TPM commands through the I2C bus.
489 *
490 * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h
491 * @param: buf, the buffer to send.
492 * @param: count, the number of bytes to send.
493 * @return: In case of success the number of bytes sent.
494 * In other case, a < 0 value describing the issue.
495 */
496static int tpm_stm_i2c_send(struct tpm_chip *chip, unsigned char *buf,
497 size_t len)
498{
499 u32 status, i, size;
500 int burstcnt = 0;
501 int ret;
502 u8 data;
503 struct i2c_client *client;
504 struct tpm_stm_dev *tpm_dev;
505
506 if (!chip)
507 return -EBUSY;
508 if (len < TPM_HEADER_SIZE)
509 return -EBUSY;
510
511 tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
512 client = tpm_dev->client;
513
514 client->flags = 0;
515
516 ret = request_locality(chip);
517 if (ret < 0)
518 return ret;
519
520 status = tpm_stm_i2c_status(chip);
521 if ((status & TPM_STS_COMMAND_READY) == 0) {
522 tpm_stm_i2c_cancel(chip);
523 if (wait_for_stat
524 (chip, TPM_STS_COMMAND_READY, chip->vendor.timeout_b,
525 &chip->vendor.read_queue, false) < 0) {
526 ret = -ETIME;
527 goto out_err;
528 }
529 }
530
531 for (i = 0; i < len - 1;) {
532 burstcnt = get_burstcount(chip);
533 if (burstcnt < 0)
534 return burstcnt;
535 size = min_t(int, len - i - 1, burstcnt);
536 ret = I2C_WRITE_DATA(tpm_dev, TPM_DATA_FIFO, buf + i, size);
537 if (ret < 0)
538 goto out_err;
539
540 i += size;
541 }
542
543 status = tpm_stm_i2c_status(chip);
544 if ((status & TPM_STS_DATA_EXPECT) == 0) {
545 ret = -EIO;
546 goto out_err;
547 }
548
549 ret = I2C_WRITE_DATA(tpm_dev, TPM_DATA_FIFO, buf + len - 1, 1);
550 if (ret < 0)
551 goto out_err;
552
553 status = tpm_stm_i2c_status(chip);
554 if ((status & TPM_STS_DATA_EXPECT) != 0) {
555 ret = -EIO;
556 goto out_err;
557 }
558
559 data = TPM_STS_GO;
560 I2C_WRITE_DATA(tpm_dev, TPM_STS, &data, 1);
561
562 return len;
563out_err:
564 tpm_stm_i2c_cancel(chip);
565 release_locality(chip);
566 return ret;
567}
568
569/*
570 * tpm_stm_i2c_recv received TPM response through the I2C bus.
571 * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h.
572 * @param: buf, the buffer to store datas.
573 * @param: count, the number of bytes to send.
574 * @return: In case of success the number of bytes received.
575 * In other case, a < 0 value describing the issue.
576 */
577static int tpm_stm_i2c_recv(struct tpm_chip *chip, unsigned char *buf,
578 size_t count)
579{
580 int size = 0;
581 int expected;
582
583 if (!chip)
584 return -EBUSY;
585
586 if (count < TPM_HEADER_SIZE) {
587 size = -EIO;
588 goto out;
589 }
590
591 size = recv_data(chip, buf, TPM_HEADER_SIZE);
592 if (size < TPM_HEADER_SIZE) {
593 dev_err(chip->pdev, "Unable to read header\n");
594 goto out;
595 }
596
597 expected = be32_to_cpu(*(__be32 *)(buf + 2));
598 if (expected > count) {
599 size = -EIO;
600 goto out;
601 }
602
603 size += recv_data(chip, &buf[TPM_HEADER_SIZE],
604 expected - TPM_HEADER_SIZE);
605 if (size < expected) {
606 dev_err(chip->pdev, "Unable to read remainder of result\n");
607 size = -ETIME;
608 goto out;
609 }
610
611out:
612 chip->ops->cancel(chip);
613 release_locality(chip);
614 return size;
615}
616
617static bool tpm_stm_i2c_req_canceled(struct tpm_chip *chip, u8 status)
618{
619 return (status == TPM_STS_COMMAND_READY);
620}
621
622static const struct tpm_class_ops st_i2c_tpm = {
623 .send = tpm_stm_i2c_send,
624 .recv = tpm_stm_i2c_recv,
625 .cancel = tpm_stm_i2c_cancel,
626 .status = tpm_stm_i2c_status,
627 .req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
628 .req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
629 .req_canceled = tpm_stm_i2c_req_canceled,
630};
631
632#ifdef CONFIG_OF
633static int tpm_stm_i2c_of_request_resources(struct tpm_chip *chip)
634{
635 struct device_node *pp;
636 struct tpm_stm_dev *tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
637 struct i2c_client *client = tpm_dev->client;
638 int gpio;
639 int ret;
640
641 pp = client->dev.of_node;
642 if (!pp) {
643 dev_err(chip->pdev, "No platform data\n");
644 return -ENODEV;
645 }
646
647 /* Get GPIO from device tree */
648 gpio = of_get_named_gpio(pp, "lpcpd-gpios", 0);
649 if (gpio < 0) {
650 dev_err(chip->pdev, "Failed to retrieve lpcpd-gpios from dts.\n");
651 tpm_dev->io_lpcpd = -1;
652 /*
653 * lpcpd pin is not specified. This is not an issue as
654 * power management can be also managed by TPM specific
655 * commands. So leave with a success status code.
656 */
657 return 0;
658 }
659 /* GPIO request and configuration */
660 ret = devm_gpio_request_one(&client->dev, gpio,
661 GPIOF_OUT_INIT_HIGH, "TPM IO LPCPD");
662 if (ret) {
663 dev_err(chip->pdev, "Failed to request lpcpd pin\n");
664 return -ENODEV;
665 }
666 tpm_dev->io_lpcpd = gpio;
667
668 return 0;
669}
670#else
671static int tpm_stm_i2c_of_request_resources(struct tpm_chip *chip)
672{
673 return -ENODEV;
674}
675#endif
676
677static int tpm_stm_i2c_request_resources(struct i2c_client *client,
678 struct tpm_chip *chip)
679{
680 struct st33zp24_platform_data *pdata;
681 struct tpm_stm_dev *tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip);
682 int ret;
683
684 pdata = client->dev.platform_data;
685 if (!pdata) {
686 dev_err(chip->pdev, "No platform data\n");
687 return -ENODEV;
688 }
689
690 /* store for late use */
691 tpm_dev->io_lpcpd = pdata->io_lpcpd;
692
693 if (gpio_is_valid(pdata->io_lpcpd)) {
694 ret = devm_gpio_request_one(&client->dev,
695 pdata->io_lpcpd, GPIOF_OUT_INIT_HIGH,
696 "TPM IO_LPCPD");
697 if (ret) {
698 dev_err(chip->pdev, "%s : reset gpio_request failed\n",
699 __FILE__);
700 return ret;
701 }
702 }
703
704 return 0;
705}
706
707/*
708 * tpm_stm_i2c_probe initialize the TPM device
709 * @param: client, the i2c_client drescription (TPM I2C description).
710 * @param: id, the i2c_device_id struct.
711 * @return: 0 in case of success.
712 * -1 in other case.
713 */
714static int
715tpm_stm_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id)
716{
717 int ret;
718 u8 intmask = 0;
719 struct tpm_chip *chip;
720 struct st33zp24_platform_data *platform_data;
721 struct tpm_stm_dev *tpm_dev;
722
723 if (!client) {
724 pr_info("%s: i2c client is NULL. Device not accessible.\n",
725 __func__);
726 return -ENODEV;
727 }
728
729 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
730 dev_info(&client->dev, "client not i2c capable\n");
731 return -ENODEV;
732 }
733
734 tpm_dev = devm_kzalloc(&client->dev, sizeof(struct tpm_stm_dev),
735 GFP_KERNEL);
736 if (!tpm_dev)
737 return -ENOMEM;
738
739 chip = tpmm_chip_alloc(&client->dev, &st_i2c_tpm);
740 if (IS_ERR(chip))
741 return PTR_ERR(chip);
742
743 TPM_VPRIV(chip) = tpm_dev;
744 tpm_dev->client = client;
745
746 platform_data = client->dev.platform_data;
747 if (!platform_data && client->dev.of_node) {
748 ret = tpm_stm_i2c_of_request_resources(chip);
749 if (ret)
750 goto _tpm_clean_answer;
751 } else if (platform_data) {
752 ret = tpm_stm_i2c_request_resources(client, chip);
753 if (ret)
754 goto _tpm_clean_answer;
755 }
756
757 chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
758 chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
759 chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
760 chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
761
762 chip->vendor.locality = LOCALITY0;
763
764 if (client->irq) {
765 /* INTERRUPT Setup */
766 init_waitqueue_head(&chip->vendor.read_queue);
767 tpm_dev->intrs = 0;
768
769 if (request_locality(chip) != LOCALITY0) {
770 ret = -ENODEV;
771 goto _tpm_clean_answer;
772 }
773
774 clear_interruption(tpm_dev);
775 ret = devm_request_irq(&client->dev, client->irq,
776 tpm_ioserirq_handler,
777 IRQF_TRIGGER_HIGH,
778 "TPM SERIRQ management", chip);
779 if (ret < 0) {
780 dev_err(chip->pdev, "TPM SERIRQ signals %d not available\n",
781 client->irq);
782 goto _tpm_clean_answer;
783 }
784
785 intmask |= TPM_INTF_CMD_READY_INT
786 | TPM_INTF_STS_VALID_INT
787 | TPM_INTF_DATA_AVAIL_INT;
788
789 ret = I2C_WRITE_DATA(tpm_dev, TPM_INT_ENABLE, &intmask, 1);
790 if (ret < 0)
791 goto _tpm_clean_answer;
792
793 intmask = TPM_GLOBAL_INT_ENABLE;
794 ret = I2C_WRITE_DATA(tpm_dev, (TPM_INT_ENABLE + 3),
795 &intmask, 1);
796 if (ret < 0)
797 goto _tpm_clean_answer;
798
799 chip->vendor.irq = client->irq;
800
801 disable_irq_nosync(chip->vendor.irq);
802
803 tpm_gen_interrupt(chip);
804 }
805
806 tpm_get_timeouts(chip);
807 tpm_do_selftest(chip);
808
809 return tpm_chip_register(chip);
810_tpm_clean_answer:
811 dev_info(chip->pdev, "TPM I2C initialisation fail\n");
812 return ret;
813}
814
815/*
816 * tpm_stm_i2c_remove remove the TPM device
817 * @param: client, the i2c_client description (TPM I2C description).
818 * @return: 0 in case of success.
819 */
820static int tpm_stm_i2c_remove(struct i2c_client *client)
821{
822 struct tpm_chip *chip =
823 (struct tpm_chip *) i2c_get_clientdata(client);
824
825 if (chip)
826 tpm_chip_unregister(chip);
827
828 return 0;
829}
830
831#ifdef CONFIG_PM_SLEEP
832/*
833 * tpm_stm_i2c_pm_suspend suspend the TPM device
834 * @param: client, the i2c_client drescription (TPM I2C description).
835 * @param: mesg, the power management message.
836 * @return: 0 in case of success.
837 */
838static int tpm_stm_i2c_pm_suspend(struct device *dev)
839{
840 struct st33zp24_platform_data *pin_infos = dev->platform_data;
841 int ret = 0;
842
843 if (gpio_is_valid(pin_infos->io_lpcpd))
844 gpio_set_value(pin_infos->io_lpcpd, 0);
845 else
846 ret = tpm_pm_suspend(dev);
847
848 return ret;
849} /* tpm_stm_i2c_suspend() */
850
851/*
852 * tpm_stm_i2c_pm_resume resume the TPM device
853 * @param: client, the i2c_client drescription (TPM I2C description).
854 * @return: 0 in case of success.
855 */
856static int tpm_stm_i2c_pm_resume(struct device *dev)
857{
858 struct tpm_chip *chip = dev_get_drvdata(dev);
859 struct st33zp24_platform_data *pin_infos = dev->platform_data;
860
861 int ret = 0;
862
863 if (gpio_is_valid(pin_infos->io_lpcpd)) {
864 gpio_set_value(pin_infos->io_lpcpd, 1);
865 ret = wait_for_stat(chip,
866 TPM_STS_VALID, chip->vendor.timeout_b,
867 &chip->vendor.read_queue, false);
868 } else {
869 ret = tpm_pm_resume(dev);
870 if (!ret)
871 tpm_do_selftest(chip);
872 }
873 return ret;
874} /* tpm_stm_i2c_pm_resume() */
875#endif
876
877static const struct i2c_device_id tpm_stm_i2c_id[] = {
878 {TPM_ST33_I2C, 0},
879 {}
880};
881MODULE_DEVICE_TABLE(i2c, tpm_stm_i2c_id);
882
883#ifdef CONFIG_OF
884static const struct of_device_id of_st33zp24_i2c_match[] = {
885 { .compatible = "st,st33zp24-i2c", },
886 {}
887};
888MODULE_DEVICE_TABLE(of, of_st33zp24_i2c_match);
889#endif
890
891static SIMPLE_DEV_PM_OPS(tpm_stm_i2c_ops, tpm_stm_i2c_pm_suspend,
892 tpm_stm_i2c_pm_resume);
893
894static struct i2c_driver tpm_stm_i2c_driver = {
895 .driver = {
896 .owner = THIS_MODULE,
897 .name = TPM_ST33_I2C,
898 .pm = &tpm_stm_i2c_ops,
899 .of_match_table = of_match_ptr(of_st33zp24_i2c_match),
900 },
901 .probe = tpm_stm_i2c_probe,
902 .remove = tpm_stm_i2c_remove,
903 .id_table = tpm_stm_i2c_id
904};
905
906module_i2c_driver(tpm_stm_i2c_driver);
907
908MODULE_AUTHOR("Christophe Ricard (tpmsupport@st.com)");
909MODULE_DESCRIPTION("STM TPM I2C ST33 Driver");
910MODULE_VERSION("1.2.1");
911MODULE_LICENSE("GPL");
diff --git a/drivers/char/tpm/tpm_ibmvtpm.c b/drivers/char/tpm/tpm_ibmvtpm.c
index b1e53e3aece5..42ffa5e7a1e0 100644
--- a/drivers/char/tpm/tpm_ibmvtpm.c
+++ b/drivers/char/tpm/tpm_ibmvtpm.c
@@ -124,7 +124,7 @@ static int tpm_ibmvtpm_send(struct tpm_chip *chip, u8 *buf, size_t count)
124{ 124{
125 struct ibmvtpm_dev *ibmvtpm; 125 struct ibmvtpm_dev *ibmvtpm;
126 struct ibmvtpm_crq crq; 126 struct ibmvtpm_crq crq;
127 u64 *word = (u64 *) &crq; 127 __be64 *word = (__be64 *)&crq;
128 int rc; 128 int rc;
129 129
130 ibmvtpm = (struct ibmvtpm_dev *)TPM_VPRIV(chip); 130 ibmvtpm = (struct ibmvtpm_dev *)TPM_VPRIV(chip);
@@ -145,11 +145,11 @@ static int tpm_ibmvtpm_send(struct tpm_chip *chip, u8 *buf, size_t count)
145 memcpy((void *)ibmvtpm->rtce_buf, (void *)buf, count); 145 memcpy((void *)ibmvtpm->rtce_buf, (void *)buf, count);
146 crq.valid = (u8)IBMVTPM_VALID_CMD; 146 crq.valid = (u8)IBMVTPM_VALID_CMD;
147 crq.msg = (u8)VTPM_TPM_COMMAND; 147 crq.msg = (u8)VTPM_TPM_COMMAND;
148 crq.len = (u16)count; 148 crq.len = cpu_to_be16(count);
149 crq.data = ibmvtpm->rtce_dma_handle; 149 crq.data = cpu_to_be32(ibmvtpm->rtce_dma_handle);
150 150
151 rc = ibmvtpm_send_crq(ibmvtpm->vdev, cpu_to_be64(word[0]), 151 rc = ibmvtpm_send_crq(ibmvtpm->vdev, be64_to_cpu(word[0]),
152 cpu_to_be64(word[1])); 152 be64_to_cpu(word[1]));
153 if (rc != H_SUCCESS) { 153 if (rc != H_SUCCESS) {
154 dev_err(ibmvtpm->dev, "tpm_ibmvtpm_send failed rc=%d\n", rc); 154 dev_err(ibmvtpm->dev, "tpm_ibmvtpm_send failed rc=%d\n", rc);
155 rc = 0; 155 rc = 0;
diff --git a/drivers/char/tpm/tpm_ibmvtpm.h b/drivers/char/tpm/tpm_ibmvtpm.h
index f595f14426bf..6af92890518f 100644
--- a/drivers/char/tpm/tpm_ibmvtpm.h
+++ b/drivers/char/tpm/tpm_ibmvtpm.h
@@ -22,9 +22,9 @@
22struct ibmvtpm_crq { 22struct ibmvtpm_crq {
23 u8 valid; 23 u8 valid;
24 u8 msg; 24 u8 msg;
25 u16 len; 25 __be16 len;
26 u32 data; 26 __be32 data;
27 u64 reserved; 27 __be64 reserved;
28} __attribute__((packed, aligned(8))); 28} __attribute__((packed, aligned(8)));
29 29
30struct ibmvtpm_crq_queue { 30struct ibmvtpm_crq_queue {
diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c
index 6d492132ad2b..922f60e1e0a0 100644
--- a/drivers/char/tpm/tpm_infineon.c
+++ b/drivers/char/tpm/tpm_infineon.c
@@ -591,27 +591,8 @@ static void tpm_inf_pnp_remove(struct pnp_dev *dev)
591 } 591 }
592} 592}
593 593
594static int tpm_inf_pnp_suspend(struct pnp_dev *dev, pm_message_t pm_state) 594#ifdef CONFIG_PM_SLEEP
595{ 595static int tpm_inf_resume(struct device *dev)
596 struct tpm_chip *chip = pnp_get_drvdata(dev);
597 int rc;
598 if (chip) {
599 u8 savestate[] = {
600 0, 193, /* TPM_TAG_RQU_COMMAND */
601 0, 0, 0, 10, /* blob length (in bytes) */
602 0, 0, 0, 152 /* TPM_ORD_SaveState */
603 };
604 dev_info(&dev->dev, "saving TPM state\n");
605 rc = tpm_inf_send(chip, savestate, sizeof(savestate));
606 if (rc < 0) {
607 dev_err(&dev->dev, "error while saving TPM state\n");
608 return rc;
609 }
610 }
611 return 0;
612}
613
614static int tpm_inf_pnp_resume(struct pnp_dev *dev)
615{ 596{
616 /* Re-configure TPM after suspending */ 597 /* Re-configure TPM after suspending */
617 tpm_config_out(ENABLE_REGISTER_PAIR, TPM_INF_ADDR); 598 tpm_config_out(ENABLE_REGISTER_PAIR, TPM_INF_ADDR);
@@ -625,16 +606,19 @@ static int tpm_inf_pnp_resume(struct pnp_dev *dev)
625 tpm_config_out(DISABLE_REGISTER_PAIR, TPM_INF_ADDR); 606 tpm_config_out(DISABLE_REGISTER_PAIR, TPM_INF_ADDR);
626 /* disable RESET, LP and IRQC */ 607 /* disable RESET, LP and IRQC */
627 tpm_data_out(RESET_LP_IRQC_DISABLE, CMD); 608 tpm_data_out(RESET_LP_IRQC_DISABLE, CMD);
628 return tpm_pm_resume(&dev->dev); 609 return tpm_pm_resume(dev);
629} 610}
611#endif
612static SIMPLE_DEV_PM_OPS(tpm_inf_pm, tpm_pm_suspend, tpm_inf_resume);
630 613
631static struct pnp_driver tpm_inf_pnp_driver = { 614static struct pnp_driver tpm_inf_pnp_driver = {
632 .name = "tpm_inf_pnp", 615 .name = "tpm_inf_pnp",
633 .id_table = tpm_inf_pnp_tbl, 616 .id_table = tpm_inf_pnp_tbl,
634 .probe = tpm_inf_pnp_probe, 617 .probe = tpm_inf_pnp_probe,
635 .suspend = tpm_inf_pnp_suspend, 618 .remove = tpm_inf_pnp_remove,
636 .resume = tpm_inf_pnp_resume, 619 .driver = {
637 .remove = tpm_inf_pnp_remove 620 .pm = &tpm_inf_pm,
621 }
638}; 622};
639 623
640static int __init init_inf(void) 624static int __init init_inf(void)
diff --git a/include/linux/platform_data/tpm_stm_st33.h b/include/linux/platform_data/st33zp24.h
index ff75310c0f47..817dfdb37885 100644
--- a/include/linux/platform_data/tpm_stm_st33.h
+++ b/include/linux/platform_data/st33zp24.h
@@ -1,6 +1,6 @@
1/* 1/*
2 * STMicroelectronics TPM I2C Linux driver for TPM ST33ZP24 2 * STMicroelectronics TPM Linux driver for TPM 1.2 ST33ZP24
3 * Copyright (C) 2009, 2010 STMicroelectronics 3 * Copyright (C) 2009 - 2015 STMicroelectronics
4 * 4 *
5 * This program is free software; you can redistribute it and/or modify 5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by 6 * it under the terms of the GNU General Public License as published by
@@ -14,20 +14,9 @@
14 * 14 *
15 * You should have received a copy of the GNU General Public License 15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, see <http://www.gnu.org/licenses/>. 16 * along with this program; if not, see <http://www.gnu.org/licenses/>.
17 *
18 * STMicroelectronics version 1.2.0, Copyright (C) 2010
19 * STMicroelectronics comes with ABSOLUTELY NO WARRANTY.
20 * This is free software, and you are welcome to redistribute it
21 * under certain conditions.
22 *
23 * @Author: Christophe RICARD tpmsupport@st.com
24 *
25 * @File: stm_st33_tpm.h
26 *
27 * @Date: 09/15/2010
28 */ 17 */
29#ifndef __STM_ST33_TPM_H__ 18#ifndef __ST33ZP24_H__
30#define __STM_ST33_TPM_H__ 19#define __ST33ZP24_H__
31 20
32#define TPM_ST33_I2C "st33zp24-i2c" 21#define TPM_ST33_I2C "st33zp24-i2c"
33#define TPM_ST33_SPI "st33zp24-spi" 22#define TPM_ST33_SPI "st33zp24-spi"
@@ -36,4 +25,4 @@ struct st33zp24_platform_data {
36 int io_lpcpd; 25 int io_lpcpd;
37}; 26};
38 27
39#endif /* __STM_ST33_TPM_H__ */ 28#endif /* __ST33ZP24_H__ */
generated by cgit v1.2.2 (git 2.25.0) at 2025-12-15 21:32:00 -0500