10 files changed, 188 insertions, 155 deletions

diff --git a/arch/x86/events/amd/ibs.c b/arch/x86/events/amd/ibs.c
index 786fd875de92..4b98101209a1 100644
--- a/arch/x86/events/amd/ibs.c
+++ b/arch/x86/events/amd/ibs.c
@@ -889,7 +889,7 @@ static void force_ibs_eilvt_setup(void)
         if (!ibs_eilvt_valid())
                 goto out;
 
-        pr_info("IBS: LVT offset %d assigned\n", offset);
+        pr_info("LVT offset %d assigned\n", offset);
 
         return;
 out:
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index cadeafabf167..5d0de79fdab0 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -2433,7 +2433,7 @@ MODULE_PARM_DESC(idle_threshold,
         "System idle percentage above which to make APM BIOS idle calls");
 module_param(idle_period, int, 0444);
 MODULE_PARM_DESC(idle_period,
-        "Period (in sec/100) over which to caculate the idle percentage");
+        "Period (in sec/100) over which to calculate the idle percentage");
 module_param(smp, bool, 0444);
 MODULE_PARM_DESC(smp,
         "Set this to enable APM use on an SMP platform. Use with caution on older systems");
diff --git a/arch/x86/kernel/cpu/mtrr/Makefile b/arch/x86/kernel/cpu/mtrr/Makefile
index ad9e5ed81181..2ad9107ee980 100644
--- a/arch/x86/kernel/cpu/mtrr/Makefile
+++ b/arch/x86/kernel/cpu/mtrr/Makefile
@@ -1,3 +1,3 @@
-obj-y           := main.o if.o generic.o cleanup.o
+obj-y           := mtrr.o if.o generic.o cleanup.o
 obj-$(CONFIG_X86_32) += amd.o cyrix.o centaur.o
 
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/mtrr.c
index 3ea0047beb40..9a19c800fe40 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/mtrr.c
@@ -101,7 +101,7 @@ static int have_wrcomb(void)
                 if (dev->vendor == PCI_VENDOR_ID_SERVERWORKS &&
                     dev->device == PCI_DEVICE_ID_SERVERWORKS_LE &&
                     dev->revision <= 5) {
-                        pr_info("mtrr: Serverworks LE rev < 6 detected. Write-combining disabled.\n");
+                        pr_info("Serverworks LE rev < 6 detected. Write-combining disabled.\n");
                         pci_dev_put(dev);
                         return 0;
                 }
@@ -111,7 +111,7 @@ static int have_wrcomb(void)
                  */
                 if (dev->vendor == PCI_VENDOR_ID_INTEL &&
                     dev->device == PCI_DEVICE_ID_INTEL_82451NX) {
-                        pr_info("mtrr: Intel 450NX MMC detected. Write-combining disabled.\n");
+                        pr_info("Intel 450NX MMC detected. Write-combining disabled.\n");
                         pci_dev_put(dev);
                         return 0;
                 }
@@ -313,24 +313,24 @@ int mtrr_add_page(unsigned long base, unsigned long size,
                 return error;
 
         if (type >= MTRR_NUM_TYPES) {
-                pr_warn("mtrr: type: %u invalid\n", type);
+                pr_warn("type: %u invalid\n", type);
                 return -EINVAL;
         }
 
         /* If the type is WC, check that this processor supports it */
         if ((type == MTRR_TYPE_WRCOMB) && !have_wrcomb()) {
-                pr_warn("mtrr: your processor doesn't support write-combining\n");
+                pr_warn("your processor doesn't support write-combining\n");
                 return -ENOSYS;
         }
 
         if (!size) {
-                pr_warn("mtrr: zero sized request\n");
+                pr_warn("zero sized request\n");
                 return -EINVAL;
         }
 
         if ((base | (base + size - 1)) >>
             (boot_cpu_data.x86_phys_bits - PAGE_SHIFT)) {
-                pr_warn("mtrr: base or size exceeds the MTRR width\n");
+                pr_warn("base or size exceeds the MTRR width\n");
                 return -EINVAL;
         }
 
@@ -361,8 +361,7 @@ int mtrr_add_page(unsigned long base, unsigned long size,
                                 } else if (types_compatible(type, ltype))
                                         continue;
                         }
-                        pr_warn("mtrr: 0x%lx000,0x%lx000 overlaps existing"
-                                " 0x%lx000,0x%lx000\n", base, size, lbase,
+                        pr_warn("0x%lx000,0x%lx000 overlaps existing 0x%lx000,0x%lx000\n", base, size, lbase,
                                 lsize);
                         goto out;
                 }
@@ -370,7 +369,7 @@ int mtrr_add_page(unsigned long base, unsigned long size,
                 if (ltype != type) {
                         if (types_compatible(type, ltype))
                                 continue;
-                        pr_warn("mtrr: type mismatch for %lx000,%lx000 old: %s new: %s\n",
+                        pr_warn("type mismatch for %lx000,%lx000 old: %s new: %s\n",
                                 base, size, mtrr_attrib_to_str(ltype),
                                 mtrr_attrib_to_str(type));
                         goto out;
@@ -396,7 +395,7 @@ int mtrr_add_page(unsigned long base, unsigned long size,
                         }
                 }
         } else {
-                pr_info("mtrr: no more MTRRs available\n");
+                pr_info("no more MTRRs available\n");
         }
         error = i;
  out:
@@ -408,8 +407,8 @@ int mtrr_add_page(unsigned long base, unsigned long size,
 static int mtrr_check(unsigned long base, unsigned long size)
 {
         if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1))) {
-                pr_warn("mtrr: size and base must be multiples of 4 kiB\n");
-                pr_debug("mtrr: size: 0x%lx  base: 0x%lx\n", size, base);
+                pr_warn("size and base must be multiples of 4 kiB\n");
+                pr_debug("size: 0x%lx  base: 0x%lx\n", size, base);
                 dump_stack();
                 return -1;
         }
@@ -500,22 +499,22 @@ int mtrr_del_page(int reg, unsigned long base, unsigned long size)
                         }
                 }
                 if (reg < 0) {
-                        pr_debug("mtrr: no MTRR for %lx000,%lx000 found\n",
+                        pr_debug("no MTRR for %lx000,%lx000 found\n",
                                  base, size);
                         goto out;
                 }
         }
         if (reg >= max) {
-                pr_warn("mtrr: register: %d too big\n", reg);
+                pr_warn("register: %d too big\n", reg);
                 goto out;
         }
         mtrr_if->get(reg, &lbase, &lsize, &ltype);
         if (lsize < 1) {
-                pr_warn("mtrr: MTRR %d not used\n", reg);
+                pr_warn("MTRR %d not used\n", reg);
                 goto out;
         }
         if (mtrr_usage_table[reg] < 1) {
-                pr_warn("mtrr: reg: %d has count=0\n", reg);
+                pr_warn("reg: %d has count=0\n", reg);
                 goto out;
         }
         if (--mtrr_usage_table[reg] < 1)
@@ -776,7 +775,7 @@ void __init mtrr_bp_init(void)
         }
 
         if (!mtrr_enabled()) {
-                pr_info("MTRR: Disabled\n");
+                pr_info("Disabled\n");
 
                 /*
                  * PAT initialization relies on MTRR's rendezvous handler.
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 6a2cb1442e05..d1f25c831447 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -155,7 +155,8 @@ static void __init __e820__range_add(struct e820_table *table, u64 start, u64 si
         int x = table->nr_entries;
 
         if (x >= ARRAY_SIZE(table->entries)) {
-                pr_err("e820: too many entries; ignoring [mem %#010llx-%#010llx]\n", start, start + size - 1);
+                pr_err("too many entries; ignoring [mem %#010llx-%#010llx]\n",
+                       start, start + size - 1);
                 return;
         }
 
@@ -190,9 +191,10 @@ void __init e820__print_table(char *who)
         int i;
 
         for (i = 0; i < e820_table->nr_entries; i++) {
-                pr_info("%s: [mem %#018Lx-%#018Lx] ", who,
-                       e820_table->entries[i].addr,
-                       e820_table->entries[i].addr + e820_table->entries[i].size - 1);
+                pr_info("%s: [mem %#018Lx-%#018Lx] ",
+                        who,
+                        e820_table->entries[i].addr,
+                        e820_table->entries[i].addr + e820_table->entries[i].size - 1);
 
                 e820_print_type(e820_table->entries[i].type);
                 pr_cont("\n");
@@ -574,7 +576,7 @@ void __init e820__update_table_print(void)
         if (e820__update_table(e820_table))
                 return;
 
-        pr_info("e820: modified physical RAM map:\n");
+        pr_info("modified physical RAM map:\n");
         e820__print_table("modified");
 }
 
@@ -636,9 +638,8 @@ __init void e820__setup_pci_gap(void)
         if (!found) {
 #ifdef CONFIG_X86_64
                 gapstart = (max_pfn << PAGE_SHIFT) + 1024*1024;
-                pr_err(
-                        "e820: Cannot find an available gap in the 32-bit address range\n"
-                        "e820: PCI devices with unassigned 32-bit BARs may not work!\n");
+                pr_err("Cannot find an available gap in the 32-bit address range\n");
+                pr_err("PCI devices with unassigned 32-bit BARs may not work!\n");
 #else
                 gapstart = 0x10000000;
 #endif
@@ -649,7 +650,8 @@ __init void e820__setup_pci_gap(void)
          */
         pci_mem_start = gapstart;
 
-        pr_info("e820: [mem %#010lx-%#010lx] available for PCI devices\n", gapstart, gapstart + gapsize - 1);
+        pr_info("[mem %#010lx-%#010lx] available for PCI devices\n",
+                gapstart, gapstart + gapsize - 1);
 }
 
 /*
@@ -711,7 +713,7 @@ void __init e820__memory_setup_extended(u64 phys_addr, u32 data_len)
         memcpy(e820_table_firmware, e820_table, sizeof(*e820_table_firmware));
 
         early_memunmap(sdata, data_len);
-        pr_info("e820: extended physical RAM map:\n");
+        pr_info("extended physical RAM map:\n");
         e820__print_table("extended");
 }
 
@@ -780,7 +782,7 @@ u64 __init e820__memblock_alloc_reserved(u64 size, u64 align)
         addr = __memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ACCESSIBLE);
         if (addr) {
                 e820__range_update_kexec(addr, size, E820_TYPE_RAM, E820_TYPE_RESERVED);
-                pr_info("e820: update e820_table_kexec for e820__memblock_alloc_reserved()\n");
+                pr_info("update e820_table_kexec for e820__memblock_alloc_reserved()\n");
                 e820__update_table_kexec();
         }
 
@@ -830,8 +832,8 @@ static unsigned long __init e820_end_pfn(unsigned long limit_pfn, enum e820_type
         if (last_pfn > max_arch_pfn)
                 last_pfn = max_arch_pfn;
 
-        pr_info("e820: last_pfn = %#lx max_arch_pfn = %#lx\n",
-                         last_pfn, max_arch_pfn);
+        pr_info("last_pfn = %#lx max_arch_pfn = %#lx\n",
+                last_pfn, max_arch_pfn);
         return last_pfn;
 }
 
@@ -1005,7 +1007,7 @@ void __init e820__finish_early_params(void)
                 if (e820__update_table(e820_table) < 0)
                         early_panic("Invalid user supplied memory map");
 
-                pr_info("e820: user-defined physical RAM map:\n");
+                pr_info("user-defined physical RAM map:\n");
                 e820__print_table("user");
         }
 }
@@ -1238,7 +1240,7 @@ void __init e820__memory_setup(void)
         memcpy(e820_table_kexec, e820_table, sizeof(*e820_table_kexec));
         memcpy(e820_table_firmware, e820_table, sizeof(*e820_table_firmware));
 
-        pr_info("e820: BIOS-provided physical RAM map:\n");
+        pr_info("BIOS-provided physical RAM map:\n");
         e820__print_table(who);
 }
 
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index bae0d32e327b..da5d8ac60062 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -28,8 +28,6 @@
 #include <asm/irq_remapping.h>
 #include <asm/early_ioremap.h>
 
-#define dev_err(msg)  pr_err("pci 0000:%02x:%02x.%d: %s", bus, slot, func, msg)
-
 static void __init fix_hypertransport_config(int num, int slot, int func)
 {
         u32 htcfg;
@@ -617,7 +615,8 @@ static void __init apple_airport_reset(int bus, int slot, int func)
 
                 pmcsr = read_pci_config_16(bus, slot, func, BCM4331_PM_CAP + PCI_PM_CTRL);
                 if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0) {
-                        dev_err("Cannot power up Apple AirPort card\n");
+                        pr_err("pci 0000:%02x:%02x.%d: Cannot power up Apple AirPort card\n",
+                               bus, slot, func);
                         return;
                 }
         }
@@ -628,7 +627,8 @@ static void __init apple_airport_reset(int bus, int slot, int func)
 
         mmio = early_ioremap(addr, BCM4331_MMIO_SIZE);
         if (!mmio) {
-                dev_err("Cannot iomap Apple AirPort card\n");
+                pr_err("pci 0000:%02x:%02x.%d: Cannot iomap Apple AirPort card\n",
+                       bus, slot, func);
                 return;
         }
 
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 8ce4212e2b8d..b6be34ee88e9 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -975,8 +975,7 @@ int __init hpet_enable(void)
         cfg &= ~(HPET_CFG_ENABLE | HPET_CFG_LEGACY);
         hpet_writel(cfg, HPET_CFG);
         if (cfg)
-                pr_warn("HPET: Unrecognized bits %#x set in global cfg\n",
-                        cfg);
+                pr_warn("Unrecognized bits %#x set in global cfg\n", cfg);
 
         for (i = 0; i <= last; ++i) {
                 cfg = hpet_readl(HPET_Tn_CFG(i));
@@ -988,7 +987,7 @@ int __init hpet_enable(void)
                          | HPET_TN_64BIT_CAP | HPET_TN_32BIT | HPET_TN_ROUTE
                          | HPET_TN_FSB | HPET_TN_FSB_CAP);
                 if (cfg)
-                        pr_warn("HPET: Unrecognized bits %#x set in cfg#%u\n",
+                        pr_warn("Unrecognized bits %#x set in cfg#%u\n",
                                 cfg, i);
         }
         hpet_print_config();
diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c
index c84bb5396958..58d8d800875d 100644
--- a/arch/x86/kernel/uprobes.c
+++ b/arch/x86/kernel/uprobes.c
@@ -1083,8 +1083,8 @@ arch_uretprobe_hijack_return_addr(unsigned long trampoline_vaddr, struct pt_regs
                 return orig_ret_vaddr;
 
         if (nleft != rasize) {
-                pr_err("uprobe: return address clobbered: pid=%d, %%sp=%#lx, "
-                        "%%ip=%#lx\n", current->pid, regs->sp, regs->ip);
+                pr_err("return address clobbered: pid=%d, %%sp=%#lx, %%ip=%#lx\n",
+                       current->pid, regs->sp, regs->ip);
 
                 force_sig_info(SIGSEGV, SEND_SIG_FORCED, current);
         }
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 25504d5aa816..fa150855647c 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -136,13 +136,13 @@ static int __init numa_add_memblk_to(int nid, u64 start, u64 end,
 
         /* whine about and ignore invalid blks */
         if (start > end || nid < 0 || nid >= MAX_NUMNODES) {
-                pr_warning("NUMA: Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n",
-                           nid, start, end - 1);
+                pr_warn("Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n",
+                        nid, start, end - 1);
                 return 0;
         }
 
         if (mi->nr_blks >= NR_NODE_MEMBLKS) {
-                pr_err("NUMA: too many memblk ranges\n");
+                pr_err("too many memblk ranges\n");
                 return -EINVAL;
         }
 
@@ -267,14 +267,14 @@ int __init numa_cleanup_meminfo(struct numa_meminfo *mi)
                          */
                         if (bi->end > bj->start && bi->start < bj->end) {
                                 if (bi->nid != bj->nid) {
-                                        pr_err("NUMA: node %d [mem %#010Lx-%#010Lx] overlaps with node %d [mem %#010Lx-%#010Lx]\n",
+                                        pr_err("node %d [mem %#010Lx-%#010Lx] overlaps with node %d [mem %#010Lx-%#010Lx]\n",
                                                bi->nid, bi->start, bi->end - 1,
                                                bj->nid, bj->start, bj->end - 1);
                                         return -EINVAL;
                                 }
-                                pr_warning("NUMA: Warning: node %d [mem %#010Lx-%#010Lx] overlaps with itself [mem %#010Lx-%#010Lx]\n",
-                                           bi->nid, bi->start, bi->end - 1,
-                                           bj->start, bj->end - 1);
+                                pr_warn("Warning: node %d [mem %#010Lx-%#010Lx] overlaps with itself [mem %#010Lx-%#010Lx]\n",
+                                        bi->nid, bi->start, bi->end - 1,
+                                        bj->start, bj->end - 1);
                         }
 
                         /*
@@ -364,7 +364,7 @@ static int __init numa_alloc_distance(void)
         phys = memblock_find_in_range(0, PFN_PHYS(max_pfn_mapped),
                                       size, PAGE_SIZE);
         if (!phys) {
-                pr_warning("NUMA: Warning: can't allocate distance table!\n");
+                pr_warn("Warning: can't allocate distance table!\n");
                 /* don't retry until explicitly reset */
                 numa_distance = (void *)1LU;
                 return -ENOMEM;
@@ -410,14 +410,14 @@ void __init numa_set_distance(int from, int to, int distance)
 
         if (from >= numa_distance_cnt || to >= numa_distance_cnt ||
                         from < 0 || to < 0) {
-                pr_warn_once("NUMA: Warning: node ids are out of bound, from=%d to=%d distance=%d\n",
-                            from, to, distance);
+                pr_warn_once("Warning: node ids are out of bound, from=%d to=%d distance=%d\n",
+                             from, to, distance);
                 return;
         }
 
         if ((u8)distance != distance ||
             (from == to && distance != LOCAL_DISTANCE)) {
-                pr_warn_once("NUMA: Warning: invalid distance parameter, from=%d to=%d distance=%d\n",
+                pr_warn_once("Warning: invalid distance parameter, from=%d to=%d distance=%d\n",
                              from, to, distance);
                 return;
         }
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index 263c8453815e..d765acedc05c 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -1,4 +1,5 @@
-/* bpf_jit_comp.c : BPF JIT compiler
+/*
+ * bpf_jit_comp.c: BPF JIT compiler
  *
  * Copyright (C) 2011-2013 Eric Dumazet (eric.dumazet@gmail.com)
  * Internal BPF Copyright (c) 2011-2014 PLUMgrid, http://plumgrid.com
@@ -17,7 +18,7 @@
 #include <asm/nospec-branch.h>
 
 /*
- * assembly code in arch/x86/net/bpf_jit.S
+ * Assembly code in arch/x86/net/bpf_jit.S
  */
 extern u8 sk_load_word[], sk_load_half[], sk_load_byte[];
 extern u8 sk_load_word_positive_offset[], sk_load_half_positive_offset[];
@@ -45,14 +46,15 @@ static u8 *emit_code(u8 *ptr, u32 bytes, unsigned int len)
 #define EMIT2(b1, b2)           EMIT((b1) + ((b2) << 8), 2)
 #define EMIT3(b1, b2, b3)       EMIT((b1) + ((b2) << 8) + ((b3) << 16), 3)
 #define EMIT4(b1, b2, b3, b4)   EMIT((b1) + ((b2) << 8) + ((b3) << 16) + ((b4) << 24), 4)
+
 #define EMIT1_off32(b1, off) \
-        do {EMIT1(b1); EMIT(off, 4); } while (0)
+        do { EMIT1(b1); EMIT(off, 4); } while (0)
 #define EMIT2_off32(b1, b2, off) \
-        do {EMIT2(b1, b2); EMIT(off, 4); } while (0)
+        do { EMIT2(b1, b2); EMIT(off, 4); } while (0)
 #define EMIT3_off32(b1, b2, b3, off) \
-        do {EMIT3(b1, b2, b3); EMIT(off, 4); } while (0)
+        do { EMIT3(b1, b2, b3); EMIT(off, 4); } while (0)
 #define EMIT4_off32(b1, b2, b3, b4, off) \
-        do {EMIT4(b1, b2, b3, b4); EMIT(off, 4); } while (0)
+        do { EMIT4(b1, b2, b3, b4); EMIT(off, 4); } while (0)
 
 static bool is_imm8(int value)
 {
@@ -70,9 +72,10 @@ static bool is_uimm32(u64 value)
 }
 
 /* mov dst, src */
-#define EMIT_mov(DST, SRC) \
-        do {if (DST != SRC) \
-                EMIT3(add_2mod(0x48, DST, SRC), 0x89, add_2reg(0xC0, DST, SRC)); \
+#define EMIT_mov(DST, SRC)                                                               \
+        do {                                                                             \
+                if (DST != SRC)                                                          \
+                        EMIT3(add_2mod(0x48, DST, SRC), 0x89, add_2reg(0xC0, DST, SRC)); \
         } while (0)
 
 static int bpf_size_to_x86_bytes(int bpf_size)
@@ -89,7 +92,8 @@ static int bpf_size_to_x86_bytes(int bpf_size)
                 return 0;
 }
 
-/* list of x86 cond jumps opcodes (. + s8)
+/*
+ * List of x86 cond jumps opcodes (. + s8)
  * Add 0x10 (and an extra 0x0f) to generate far jumps (. + s32)
  */
 #define X86_JB  0x72
@@ -106,35 +110,37 @@ static int bpf_size_to_x86_bytes(int bpf_size)
 #define CHOOSE_LOAD_FUNC(K, func) \
         ((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative_offset : func) : func##_positive_offset)
 
-/* pick a register outside of BPF range for JIT internal work */
+/* Pick a register outside of BPF range for JIT internal work */
 #define AUX_REG (MAX_BPF_JIT_REG + 1)
 
-/* The following table maps BPF registers to x64 registers.
+/*
+ * The following table maps BPF registers to x86-64 registers.
  *
- * x64 register r12 is unused, since if used as base address
+ * x86-64 register R12 is unused, since if used as base address
  * register in load/store instructions, it always needs an
  * extra byte of encoding and is callee saved.
  *
- *  r9 caches skb->len - skb->data_len
- * r10 caches skb->data, and used for blinding (if enabled)
+ * R9  caches skb->len - skb->data_len
+ * R10 caches skb->data, and used for blinding (if enabled)
  */
 static const int reg2hex[] = {
-        [BPF_REG_0] = 0,  /* rax */
-        [BPF_REG_1] = 7,  /* rdi */
-        [BPF_REG_2] = 6,  /* rsi */
-        [BPF_REG_3] = 2,  /* rdx */
-        [BPF_REG_4] = 1,  /* rcx */
-        [BPF_REG_5] = 0,  /* r8 */
-        [BPF_REG_6] = 3,  /* rbx callee saved */
-        [BPF_REG_7] = 5,  /* r13 callee saved */
-        [BPF_REG_8] = 6,  /* r14 callee saved */
-        [BPF_REG_9] = 7,  /* r15 callee saved */
-        [BPF_REG_FP] = 5, /* rbp readonly */
-        [BPF_REG_AX] = 2, /* r10 temp register */
-        [AUX_REG] = 3,    /* r11 temp register */
+        [BPF_REG_0] = 0,  /* RAX */
+        [BPF_REG_1] = 7,  /* RDI */
+        [BPF_REG_2] = 6,  /* RSI */
+        [BPF_REG_3] = 2,  /* RDX */
+        [BPF_REG_4] = 1,  /* RCX */
+        [BPF_REG_5] = 0,  /* R8  */
+        [BPF_REG_6] = 3,  /* RBX callee saved */
+        [BPF_REG_7] = 5,  /* R13 callee saved */
+        [BPF_REG_8] = 6,  /* R14 callee saved */
+        [BPF_REG_9] = 7,  /* R15 callee saved */
+        [BPF_REG_FP] = 5, /* RBP readonly */
+        [BPF_REG_AX] = 2, /* R10 temp register */
+        [AUX_REG] = 3,    /* R11 temp register */
 };
 
-/* is_ereg() == true if BPF register 'reg' maps to x64 r8..r15
+/*
+ * is_ereg() == true if BPF register 'reg' maps to x86-64 r8..r15
  * which need extra byte of encoding.
  * rax,rcx,...,rbp have simpler encoding
  */
@@ -153,7 +159,7 @@ static bool is_axreg(u32 reg)
         return reg == BPF_REG_0;
 }
 
-/* add modifiers if 'reg' maps to x64 registers r8..r15 */
+/* Add modifiers if 'reg' maps to x86-64 registers R8..R15 */
 static u8 add_1mod(u8 byte, u32 reg)
 {
         if (is_ereg(reg))
@@ -170,13 +176,13 @@ static u8 add_2mod(u8 byte, u32 r1, u32 r2)
         return byte;
 }
 
-/* encode 'dst_reg' register into x64 opcode 'byte' */
+/* Encode 'dst_reg' register into x86-64 opcode 'byte' */
 static u8 add_1reg(u8 byte, u32 dst_reg)
 {
         return byte + reg2hex[dst_reg];
 }
 
-/* encode 'dst_reg' and 'src_reg' registers into x64 opcode 'byte' */
+/* Encode 'dst_reg' and 'src_reg' registers into x86-64 opcode 'byte' */
 static u8 add_2reg(u8 byte, u32 dst_reg, u32 src_reg)
 {
         return byte + reg2hex[dst_reg] + (reg2hex[src_reg] << 3);
@@ -184,27 +190,28 @@ static u8 add_2reg(u8 byte, u32 dst_reg, u32 src_reg)
 
 static void jit_fill_hole(void *area, unsigned int size)
 {
-        /* fill whole space with int3 instructions */
+        /* Fill whole space with INT3 instructions */
         memset(area, 0xcc, size);
 }
 
 struct jit_context {
-        int cleanup_addr; /* epilogue code offset */
+        int cleanup_addr; /* Epilogue code offset */
         bool seen_ld_abs;
         bool seen_ax_reg;
 };
 
-/* maximum number of bytes emitted while JITing one eBPF insn */
+/* Maximum number of bytes emitted while JITing one eBPF insn */
 #define BPF_MAX_INSN_SIZE       128
 #define BPF_INSN_SAFETY         64
 
 #define AUX_STACK_SPACE \
-        (32 /* space for rbx, r13, r14, r15 */ + \
-         8 /* space for skb_copy_bits() buffer */)
+        (32 /* Space for RBX, R13, R14, R15 */ + \
+          8 /* Space for skb_copy_bits() buffer */)
 
 #define PROLOGUE_SIZE 37
 
-/* emit x64 prologue code for BPF program and check it's size.
+/*
+ * Emit x86-64 prologue code for BPF program and check its size.
  * bpf_tail_call helper will skip it while jumping into another program
  */
 static void emit_prologue(u8 **pprog, u32 stack_depth, bool ebpf_from_cbpf)
@@ -212,8 +219,11 @@ static void emit_prologue(u8 **pprog, u32 stack_depth, bool ebpf_from_cbpf)
         u8 *prog = *pprog;
         int cnt = 0;
 
-        EMIT1(0x55); /* push rbp */
-        EMIT3(0x48, 0x89, 0xE5); /* mov rbp,rsp */
+        /* push rbp */
+        EMIT1(0x55);
+
+        /* mov rbp,rsp */
+        EMIT3(0x48, 0x89, 0xE5);
 
         /* sub rsp, rounded_stack_depth + AUX_STACK_SPACE */
         EMIT3_off32(0x48, 0x81, 0xEC,
@@ -222,14 +232,15 @@ static void emit_prologue(u8 **pprog, u32 stack_depth, bool ebpf_from_cbpf)
         /* sub rbp, AUX_STACK_SPACE */
         EMIT4(0x48, 0x83, 0xED, AUX_STACK_SPACE);
 
-        /* all classic BPF filters use R6(rbx) save it */
+        /* All classic BPF filters use R6(rbx) save it */
 
         /* mov qword ptr [rbp+0],rbx */
         EMIT4(0x48, 0x89, 0x5D, 0);
 
-        /* bpf_convert_filter() maps classic BPF register X to R7 and uses R8
-         * as temporary, so all tcpdump filters need to spill/fill R7(r13) and
-         * R8(r14). R9(r15) spill could be made conditional, but there is only
+        /*
+         * bpf_convert_filter() maps classic BPF register X to R7 and uses R8
+         * as temporary, so all tcpdump filters need to spill/fill R7(R13) and
+         * R8(R14). R9(R15) spill could be made conditional, but there is only
          * one 'bpf_error' return path out of helper functions inside bpf_jit.S
          * The overhead of extra spill is negligible for any filter other
          * than synthetic ones. Therefore not worth adding complexity.
@@ -243,9 +254,10 @@ static void emit_prologue(u8 **pprog, u32 stack_depth, bool ebpf_from_cbpf)
         EMIT4(0x4C, 0x89, 0x7D, 24);
 
         if (!ebpf_from_cbpf) {
-                /* Clear the tail call counter (tail_call_cnt): for eBPF tail
+                /*
+                 * Clear the tail call counter (tail_call_cnt): for eBPF tail
                  * calls we need to reset the counter to 0. It's done in two
-                 * instructions, resetting rax register to 0, and moving it
+                 * instructions, resetting RAX register to 0, and moving it
                  * to the counter location.
                  */
 
@@ -260,7 +272,9 @@ static void emit_prologue(u8 **pprog, u32 stack_depth, bool ebpf_from_cbpf)
         *pprog = prog;
 }
 
-/* generate the following code:
+/*
+ * Generate the following code:
+ *
  * ... bpf_tail_call(void *ctx, struct bpf_array *array, u64 index) ...
  *   if (index >= array->map.max_entries)
  *     goto out;
@@ -278,23 +292,26 @@ static void emit_bpf_tail_call(u8 **pprog)
         int label1, label2, label3;
         int cnt = 0;
 
-        /* rdi - pointer to ctx
+        /*
+         * rdi - pointer to ctx
          * rsi - pointer to bpf_array
          * rdx - index in bpf_array
          */
 
-        /* if (index >= array->map.max_entries)
-         *   goto out;
+        /*
+         * if (index >= array->map.max_entries)
+         *      goto out;
          */
         EMIT2(0x89, 0xD2);                        /* mov edx, edx */
         EMIT3(0x39, 0x56,                         /* cmp dword ptr [rsi + 16], edx */
               offsetof(struct bpf_array, map.max_entries));
-#define OFFSET1 (41 + RETPOLINE_RAX_BPF_JIT_SIZE) /* number of bytes to jump */
+#define OFFSET1 (41 + RETPOLINE_RAX_BPF_JIT_SIZE) /* Number of bytes to jump */
         EMIT2(X86_JBE, OFFSET1);                  /* jbe out */
         label1 = cnt;
 
-        /* if (tail_call_cnt > MAX_TAIL_CALL_CNT)
-         *   goto out;
+        /*
+         * if (tail_call_cnt > MAX_TAIL_CALL_CNT)
+         *      goto out;
          */
         EMIT2_off32(0x8B, 0x85, 36);              /* mov eax, dword ptr [rbp + 36] */
         EMIT3(0x83, 0xF8, MAX_TAIL_CALL_CNT);     /* cmp eax, MAX_TAIL_CALL_CNT */
@@ -308,8 +325,9 @@ static void emit_bpf_tail_call(u8 **pprog)
         EMIT4_off32(0x48, 0x8B, 0x84, 0xD6,       /* mov rax, [rsi + rdx * 8 + offsetof(...)] */
                     offsetof(struct bpf_array, ptrs));
 
-        /* if (prog == NULL)
-         *   goto out;
+        /*
+         * if (prog == NULL)
+         *      goto out;
          */
         EMIT3(0x48, 0x85, 0xC0);                  /* test rax,rax */
 #define OFFSET3 (8 + RETPOLINE_RAX_BPF_JIT_SIZE)
@@ -321,7 +339,8 @@ static void emit_bpf_tail_call(u8 **pprog)
               offsetof(struct bpf_prog, bpf_func));
         EMIT4(0x48, 0x83, 0xC0, PROLOGUE_SIZE);   /* add rax, prologue_size */
 
-        /* now we're ready to jump into next BPF program
+        /*
+         * Wow we're ready to jump into next BPF program
          * rdi == ctx (1st arg)
          * rax == prog->bpf_func + prologue_size
          */
@@ -340,7 +359,8 @@ static void emit_load_skb_data_hlen(u8 **pprog)
         u8 *prog = *pprog;
         int cnt = 0;
 
-        /* r9d = skb->len - skb->data_len (headlen)
+        /*
+         * r9d = skb->len - skb->data_len (headlen)
          * r10 = skb->data
          */
         /* mov %r9d, off32(%rdi) */
@@ -361,7 +381,8 @@ static void emit_mov_imm32(u8 **pprog, bool sign_propagate,
         u8 b1, b2, b3;
         int cnt = 0;
 
-        /* optimization: if imm32 is positive, use 'mov %eax, imm32'
+        /*
+         * Optimization: if imm32 is positive, use 'mov %eax, imm32'
          * (which zero-extends imm32) to save 2 bytes.
          */
         if (sign_propagate && (s32)imm32 < 0) {
@@ -373,7 +394,8 @@ static void emit_mov_imm32(u8 **pprog, bool sign_propagate,
                 goto done;
         }
 
-        /* optimization: if imm32 is zero, use 'xor %eax, %eax'
+        /*
+         * Optimization: if imm32 is zero, use 'xor %eax, %eax'
          * to save 3 bytes.
          */
         if (imm32 == 0) {
@@ -400,7 +422,8 @@ static void emit_mov_imm64(u8 **pprog, u32 dst_reg,
         int cnt = 0;
 
         if (is_uimm32(((u64)imm32_hi << 32) | (u32)imm32_lo)) {
-                /* For emitting plain u32, where sign bit must not be
+                /*
+                 * For emitting plain u32, where sign bit must not be
                  * propagated LLVM tends to load imm64 over mov32
                  * directly, so save couple of bytes by just doing
                  * 'mov %eax, imm32' instead.
@@ -525,7 +548,8 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
                         else if (is_ereg(dst_reg))
                                 EMIT1(add_1mod(0x40, dst_reg));
 
-                        /* b3 holds 'normal' opcode, b2 short form only valid
+                        /*
+                         * b3 holds 'normal' opcode, b2 short form only valid
                          * in case dst is eax/rax.
                          */
                         switch (BPF_OP(insn->code)) {
@@ -593,7 +617,8 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
                         /* mov rax, dst_reg */
                         EMIT_mov(BPF_REG_0, dst_reg);
 
-                        /* xor edx, edx
+                        /*
+                         * xor edx, edx
                          * equivalent to 'xor rdx, rdx', but one byte less
                          */
                         EMIT2(0x31, 0xd2);
@@ -655,7 +680,7 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
                         }
                         break;
                 }
-                        /* shifts */
+                        /* Shifts */
                 case BPF_ALU | BPF_LSH | BPF_K:
                 case BPF_ALU | BPF_RSH | BPF_K:
                 case BPF_ALU | BPF_ARSH | BPF_K:
@@ -686,7 +711,7 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
                 case BPF_ALU64 | BPF_RSH | BPF_X:
                 case BPF_ALU64 | BPF_ARSH | BPF_X:
 
-                        /* check for bad case when dst_reg == rcx */
+                        /* Check for bad case when dst_reg == rcx */
                         if (dst_reg == BPF_REG_4) {
                                 /* mov r11, dst_reg */
                                 EMIT_mov(AUX_REG, dst_reg);
@@ -724,13 +749,13 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
                 case BPF_ALU | BPF_END | BPF_FROM_BE:
                         switch (imm32) {
                         case 16:
-                                /* emit 'ror %ax, 8' to swap lower 2 bytes */
+                                /* Emit 'ror %ax, 8' to swap lower 2 bytes */
                                 EMIT1(0x66);
                                 if (is_ereg(dst_reg))
                                         EMIT1(0x41);
                                 EMIT3(0xC1, add_1reg(0xC8, dst_reg), 8);
 
-                                /* emit 'movzwl eax, ax' */
+                                /* Emit 'movzwl eax, ax' */
                                 if (is_ereg(dst_reg))
                                         EMIT3(0x45, 0x0F, 0xB7);
                                 else
@@ -738,7 +763,7 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
                                 EMIT1(add_2reg(0xC0, dst_reg, dst_reg));
                                 break;
                         case 32:
-                                /* emit 'bswap eax' to swap lower 4 bytes */
+                                /* Emit 'bswap eax' to swap lower 4 bytes */
                                 if (is_ereg(dst_reg))
                                         EMIT2(0x41, 0x0F);
                                 else
@@ -746,7 +771,7 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
                                 EMIT1(add_1reg(0xC8, dst_reg));
                                 break;
                         case 64:
-                                /* emit 'bswap rax' to swap 8 bytes */
+                                /* Emit 'bswap rax' to swap 8 bytes */
                                 EMIT3(add_1mod(0x48, dst_reg), 0x0F,
                                       add_1reg(0xC8, dst_reg));
                                 break;
@@ -756,7 +781,8 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
                 case BPF_ALU | BPF_END | BPF_FROM_LE:
                         switch (imm32) {
                         case 16:
-                                /* emit 'movzwl eax, ax' to zero extend 16-bit
+                                /*
+                                 * Emit 'movzwl eax, ax' to zero extend 16-bit
                                  * into 64 bit
                                  */
                                 if (is_ereg(dst_reg))
@@ -766,7 +792,7 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
                                 EMIT1(add_2reg(0xC0, dst_reg, dst_reg));
                                 break;
                         case 32:
-                                /* emit 'mov eax, eax' to clear upper 32-bits */
+                                /* Emit 'mov eax, eax' to clear upper 32-bits */
                                 if (is_ereg(dst_reg))
                                         EMIT1(0x45);
                                 EMIT2(0x89, add_2reg(0xC0, dst_reg, dst_reg));
@@ -809,9 +835,9 @@ st:			if (is_imm8(insn->off))
 
                         /* STX: *(u8*)(dst_reg + off) = src_reg */
                 case BPF_STX | BPF_MEM | BPF_B:
-                        /* emit 'mov byte ptr [rax + off], al' */
+                        /* Emit 'mov byte ptr [rax + off], al' */
                         if (is_ereg(dst_reg) || is_ereg(src_reg) ||
-                            /* have to add extra byte for x86 SIL, DIL regs */
+                            /* We have to add extra byte for x86 SIL, DIL regs */
                             src_reg == BPF_REG_1 || src_reg == BPF_REG_2)
                                 EMIT2(add_2mod(0x40, dst_reg, src_reg), 0x88);
                         else
@@ -840,25 +866,26 @@ stx:			if (is_imm8(insn->off))
 
                         /* LDX: dst_reg = *(u8*)(src_reg + off) */
                 case BPF_LDX | BPF_MEM | BPF_B:
-                        /* emit 'movzx rax, byte ptr [rax + off]' */
+                        /* Emit 'movzx rax, byte ptr [rax + off]' */
                         EMIT3(add_2mod(0x48, src_reg, dst_reg), 0x0F, 0xB6);
                         goto ldx;
                 case BPF_LDX | BPF_MEM | BPF_H:
-                        /* emit 'movzx rax, word ptr [rax + off]' */
+                        /* Emit 'movzx rax, word ptr [rax + off]' */
                         EMIT3(add_2mod(0x48, src_reg, dst_reg), 0x0F, 0xB7);
                         goto ldx;
                 case BPF_LDX | BPF_MEM | BPF_W:
-                        /* emit 'mov eax, dword ptr [rax+0x14]' */
+                        /* Emit 'mov eax, dword ptr [rax+0x14]' */
                         if (is_ereg(dst_reg) || is_ereg(src_reg))
                                 EMIT2(add_2mod(0x40, src_reg, dst_reg), 0x8B);
                         else
                                 EMIT1(0x8B);
                         goto ldx;
                 case BPF_LDX | BPF_MEM | BPF_DW:
-                        /* emit 'mov rax, qword ptr [rax+0x14]' */
+                        /* Emit 'mov rax, qword ptr [rax+0x14]' */
                         EMIT2(add_2mod(0x48, src_reg, dst_reg), 0x8B);
-ldx:                    /* if insn->off == 0 we can save one extra byte, but
-                         * special case of x86 r13 which always needs an offset
+ldx:                    /*
+                         * If insn->off == 0 we can save one extra byte, but
+                         * special case of x86 R13 which always needs an offset
                          * is not worth the hassle
                          */
                         if (is_imm8(insn->off))
@@ -870,7 +897,7 @@ ldx:			/* if insn->off == 0 we can save one extra byte, but
 
                         /* STX XADD: lock *(u32*)(dst_reg + off) += src_reg */
                 case BPF_STX | BPF_XADD | BPF_W:
-                        /* emit 'lock add dword ptr [rax + off], eax' */
+                        /* Emit 'lock add dword ptr [rax + off], eax' */
                         if (is_ereg(dst_reg) || is_ereg(src_reg))
                                 EMIT3(0xF0, add_2mod(0x40, dst_reg, src_reg), 0x01);
                         else
@@ -897,14 +924,15 @@ xadd:			if (is_imm8(insn->off))
                                 } else {
                                         EMIT2(0x41, 0x52); /* push %r10 */
                                         EMIT2(0x41, 0x51); /* push %r9 */
-                                        /* need to adjust jmp offset, since
+                                        /*
+                                         * We need to adjust jmp offset, since
                                          * pop %r9, pop %r10 take 4 bytes after call insn
                                          */
                                         jmp_offset += 4;
                                 }
                         }
                         if (!imm32 || !is_simm32(jmp_offset)) {
-                                pr_err("unsupported bpf func %d addr %p image %p\n",
+                                pr_err("unsupported BPF func %d addr %p image %p\n",
                                        imm32, func, image);
                                 return -EINVAL;
                         }
@@ -970,7 +998,7 @@ xadd:			if (is_imm8(insn->off))
                         else
                                 EMIT2_off32(0x81, add_1reg(0xF8, dst_reg), imm32);
 
-emit_cond_jmp:          /* convert BPF opcode to x86 */
+emit_cond_jmp:          /* Convert BPF opcode to x86 */
                         switch (BPF_OP(insn->code)) {
                         case BPF_JEQ:
                                 jmp_cond = X86_JE;
@@ -996,22 +1024,22 @@ emit_cond_jmp:		/* convert BPF opcode to x86 */
                                 jmp_cond = X86_JBE;
                                 break;
                         case BPF_JSGT:
-                                /* signed '>', GT in x86 */
+                                /* Signed '>', GT in x86 */
                                 jmp_cond = X86_JG;
                                 break;
                         case BPF_JSLT:
-                                /* signed '<', LT in x86 */
+                                /* Signed '<', LT in x86 */
                                 jmp_cond = X86_JL;
                                 break;
                         case BPF_JSGE:
-                                /* signed '>=', GE in x86 */
+                                /* Signed '>=', GE in x86 */
                                 jmp_cond = X86_JGE;
                                 break;
                         case BPF_JSLE:
-                                /* signed '<=', LE in x86 */
+                                /* Signed '<=', LE in x86 */
                                 jmp_cond = X86_JLE;
                                 break;
-                        default: /* to silence gcc warning */
+                        default: /* to silence GCC warning */
                                 return -EFAULT;
                         }
                         jmp_offset = addrs[i + insn->off] - addrs[i];
@@ -1039,7 +1067,7 @@ emit_cond_jmp:		/* convert BPF opcode to x86 */
                                 jmp_offset = addrs[i + insn->off] - addrs[i];
 
                         if (!jmp_offset)
-                                /* optimize out nop jumps */
+                                /* Optimize out nop jumps */
                                 break;
 emit_jmp:
                         if (is_imm8(jmp_offset)) {
@@ -1061,7 +1089,7 @@ common_load:
                         ctx->seen_ld_abs = seen_ld_abs = true;
                         jmp_offset = func - (image + addrs[i]);
                         if (!func || !is_simm32(jmp_offset)) {
-                                pr_err("unsupported bpf func %d addr %p image %p\n",
+                                pr_err("unsupported BPF func %d addr %p image %p\n",
                                        imm32, func, image);
                                 return -EINVAL;
                         }
@@ -1080,7 +1108,8 @@ common_load:
                                                 EMIT2_off32(0x81, 0xC6, imm32);
                                 }
                         }
-                        /* skb pointer is in R6 (%rbx), it will be copied into
+                        /*
+                         * skb pointer is in R6 (%rbx), it will be copied into
                          * %rdi if skb_copy_bits() call is necessary.
                          * sk_load_* helpers also use %r10 and %r9d.
                          * See bpf_jit.S
@@ -1111,7 +1140,7 @@ common_load:
                                 goto emit_jmp;
                         }
                         seen_exit = true;
-                        /* update cleanup_addr */
+                        /* Update cleanup_addr */
                         ctx->cleanup_addr = proglen;
                         /* mov rbx, qword ptr [rbp+0] */
                         EMIT4(0x48, 0x8B, 0x5D, 0);
@@ -1129,10 +1158,11 @@ common_load:
                         break;
 
                 default:
-                        /* By design x64 JIT should support all BPF instructions
+                        /*
+                         * By design x86-64 JIT should support all BPF instructions.
                          * This error will be seen if new instruction was added
-                         * to interpreter, but not to JIT
-                         * or if there is junk in bpf_prog
+                         * to the interpreter, but not to the JIT, or if there is
+                         * junk in bpf_prog.
                          */
                         pr_err("bpf_jit: unknown opcode %02x\n", insn->code);
                         return -EINVAL;
@@ -1184,7 +1214,8 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
                 return orig_prog;
 
         tmp = bpf_jit_blind_constants(prog);
-        /* If blinding was requested and we failed during blinding,
+        /*
+         * If blinding was requested and we failed during blinding,
          * we must fall back to the interpreter.
          */
         if (IS_ERR(tmp))
@@ -1218,8 +1249,9 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
                 goto out_addrs;
         }
 
-        /* Before first pass, make a rough estimation of addrs[]
-         * each bpf instruction is translated to less than 64 bytes
+        /*
+         * Before first pass, make a rough estimation of addrs[]
+         * each BPF instruction is translated to less than 64 bytes
          */
         for (proglen = 0, i = 0; i < prog->len; i++) {
                 proglen += 64;
@@ -1228,10 +1260,11 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
         ctx.cleanup_addr = proglen;
 skip_init_addrs:
 
-        /* JITed image shrinks with every pass and the loop iterates
-         * until the image stops shrinking. Very large bpf programs
+        /*
+         * JITed image shrinks with every pass and the loop iterates
+         * until the image stops shrinking. Very large BPF programs
          * may converge on the last pass. In such case do one more
-         * pass to emit the final image
+         * pass to emit the final image.
          */
         for (pass = 0; pass < 20 || image; pass++) {
                 proglen = do_jit(prog, addrs, image, oldproglen, &ctx);