From 684697cbbcd076b8fde78d8863e341700533b542 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Fri, 18 Jan 2013 15:31:15 +0800 Subject: pinctrl: generic: add slew rate config parameter Add PIN_CONFIG_SLEW_RATE parameter into pinconf-generic driver. Signed-off-by: Haojian Zhuang Signed-off-by: Linus Walleij --- include/linux/pinctrl/pinconf-generic.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux/pinctrl') diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index 40d7bb9c7562..3e7909aa5c03 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -60,6 +60,9 @@ * @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power * supplies, the argument to this parameter (on a custom format) tells * the driver which alternative power source to use. + * @PIN_CONFIG_SLEW_RATE: if the pin can select slew rate, the argument to + * this parameter (on a custom format) tells the driver which alternative + * slew rate to use. * @PIN_CONFIG_LOW_POWER_MODE: this will configure the pin for low power * operation, if several modes of operation are supported these can be * passed in the argument on a custom form, else just use argument 1 @@ -83,6 +86,7 @@ enum pin_config_param { PIN_CONFIG_INPUT_SCHMITT, PIN_CONFIG_INPUT_DEBOUNCE, PIN_CONFIG_POWER_SOURCE, + PIN_CONFIG_SLEW_RATE, PIN_CONFIG_LOW_POWER_MODE, PIN_CONFIG_OUTPUT, PIN_CONFIG_END = 0x7FFF, -- cgit v1.2.2