aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/configs
Commit message (Collapse)AuthorAge
...
| | * | ARM: omap2plus_defconfig: Enable AT24 eepromNishanth Menon2016-02-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | AT24 compatible eeproms are used in BB family and X15 boards. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | ARM: omap2plus_defconfig: Enable TI TVP5150 video decoder supportJavier Martinez Canillas2016-02-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many OMAP3 boards have a TVP5150/1 video decoder attached to the OMAP3 ISP so enable support for its driver as a module to be able to test it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | ARM: omap2plus_defconfig: Enable ISP support and dependenciesJavier Martinez Canillas2016-02-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The OMAP3 SoC has a Image Signal Processor (ISP) that's used to accelerate camera images processing. The ISP driver implements V4L2, Media Controller and V4L2 sub-dev interfaces so enable support for the driver and all these dependencies to allow video capture to be tested using this HW IP block. Also, disable the I2C ancillary drivers auto-select option since the media driver does not auto-select the ancillary devices that are attached to the bridge because this depends on what's present in the supported OMAP boards. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | ARM: omap2plus_defconfig: Enable OMAP IOMMU supportJavier Martinez Canillas2016-02-22
| | |/ | | | | | | | | | | | | | | | | | | | | | OMAP3 media platform drivers (i.e: omap3isp) needs IOMMU support so enable it to be able to test the OMAP3 Image Signal Processor (ISP). Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | Merge tag 'imx-defconfig-4.6' of ↵Arnd Bergmann2016-03-02
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig Merge "i.MX defconfig update for 4.6" from Shawn Guo: - Enable i.MX25 Touchscreen controller and ADC support - Enable NVMEM OCOTP driver support - Clean up mxs_defconfig and imx_v4_v5_defconfig - Enable initramfs support - Enable PSCI, SAHARA and more Vybrid driver support * tag 'imx-defconfig-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx_v4_v5_defconfig: Enable initramfs support ARM: imx_v4_v5_defconfig: Cleanup imx_v4_v5_defconfig ARM: mxs_defconfig: Enable initramfs support ARM: mxs_defconfig: Cleanup mxs_defconfig ARM: imx_v6_v7_defconfig: enable useful configurations for Vybrid ARM: imx_v6_v7_defconfig: Select CONFIG_CRYPTO_DEV_SAHARA ARM: imx_v4_v5_defconfig: Add I.MX25 Touchscreen controller and ADC support. ARM: mxs_defconfig: Select CONFIG_NVMEM_MXS_OCOTP ARM: imx_v6_v7_defconfig: Select CONFIG_NVMEM_IMX_OCOTP ARM: imx_v6_v7_defconfig: enable psci default
| | * | ARM: imx_v4_v5_defconfig: Enable initramfs supportJan Luebbe2016-03-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This makes it possible to automatically boot-test this defconfig with kernelci.org. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | ARM: imx_v4_v5_defconfig: Cleanup imx_v4_v5_defconfigJan Luebbe2016-03-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Regenerate imx_v4_v5_defconfig by running: make imx_v4_v5_defconfig - Manually disable EXT2_FS and EXT3_FS make savedefconfig mv defconfig arch/arm/configs/imx_v4_v5_defconfig Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | ARM: mxs_defconfig: Enable initramfs supportJan Luebbe2016-02-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This makes it possible to automatically boot-test this defconfig with kernelci.org. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | ARM: mxs_defconfig: Cleanup mxs_defconfigJan Luebbe2016-02-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Regenerate mxs_defconfig by running: make mxs_defconfig - Manually disable EXT2_FS and EXT3_FS make savedefconfig mv defconfig arch/arm/configs/mxs_defconfig Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | ARM: imx_v6_v7_defconfig: enable useful configurations for VybridStefan Agner2016-02-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable configuration options useful for Vybrid: - NFC NAND driver - USB dual-role controller support - FTM PWM driver - DSPI SPI driver - Colibri VF50 Touchscreen support. Beside that, enable useful configurations such as IIO hwmon support (used in i.MX 23/28, patch pending for Vybrid), PWM LED support and CPU idle support. Regenerated config using savedefconfig (which removes some configs which are now enabled by default). Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | ARM: imx_v6_v7_defconfig: Select CONFIG_CRYPTO_DEV_SAHARAFabio Estevam2016-02-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Select the sahara crypto driver that is used on i.MX53. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | ARM: imx_v4_v5_defconfig: Add I.MX25 Touchscreen controller and ADC support.Denis Carikli2016-02-13
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
| | * | ARM: mxs_defconfig: Select CONFIG_NVMEM_MXS_OCOTPFabio Estevam2016-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Select the mxs ocotp driver. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | ARM: imx_v6_v7_defconfig: Select CONFIG_NVMEM_IMX_OCOTPFabio Estevam2016-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Select the i.mx ocotp driver. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | ARM: imx_v6_v7_defconfig: enable psci defaultFrank Li2016-01-28
| | |/ | | | | | | | | | | | | | | | | | | | | | i.MX7D uboot support psci firmware. Enabled psci default. Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| * | Merge tag 'sunxi-defconfig-for-4.6' of ↵Arnd Bergmann2016-02-29
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/defconfig Merge "Allwinner defconfig changes for 4.6" from Maxime Ripard: A bunch of changes to add new drivers to the sunxi and multi_v7 defconfigs, most notably the USB OTG that is finally enabled. * tag 'sunxi-defconfig-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: sunxi_defconfig: Enable MUSB HDRC driver with Allwinner glue ARM: multi_v7_defconfig: Enable A10 audio codec driver as module ARM: multi_v7_defconfig: Enable MUSB HDRC driver with Allwinner glue ARM: sunxi_defconfig: Enable INPUT_EVDEV so axp20x-pek can be used ARM: sunxi_defconfig: Enable A10 audio codec driver ARM: sunxi_defconfig: Enable sunxi IR driver
| | * | ARM: sunxi_defconfig: Enable MUSB HDRC driver with Allwinner glueChen-Yu Tsai2016-02-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allwinner SoCs typically have a Mentor Graphics Inventra MUSB dual role controller for USB OTG. Now that the issue with MUSB and USB gadget registration order has been resolved, we can enable this driver in dual role mode. This requires the NOP USB transceiver driver, which is also enabled. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | ARM: multi_v7_defconfig: Enable A10 audio codec driver as moduleChen-Yu Tsai2016-02-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The A10 audio codec driver supports the on-chip audio codec found on Allwinner A10, A10s, A13, A20 SoCs. Build it as a module, since it is not critical. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | ARM: multi_v7_defconfig: Enable MUSB HDRC driver with Allwinner glueChen-Yu Tsai2016-02-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allwinner SoCs typically have a Mentor Graphics Inventra MUSB high speed dual role controller for USB OTG. Now that the issue with MUSB and USB gadget registration order has been resolved, we can enable this driver in dual role mode. This patch only enables the driver core and Allwinner platform support. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | ARM: sunxi_defconfig: Enable INPUT_EVDEV so axp20x-pek can be usedChen-Yu Tsai2016-02-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sunxi_defconfig already enables INPUT_AXP20X_PEK, but the device is not exposed to userspace. Enable INPUT_EVDEV so it is. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | ARM: sunxi_defconfig: Enable A10 audio codec driverChen-Yu Tsai2016-02-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The A10 audio codec driver supports the on-chip audio codec found on Allwinner A10, A10s, A13, A20 SoCs. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | ARM: sunxi_defconfig: Enable sunxi IR driverChen-Yu Tsai2016-02-09
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | A consumer IR receiver is commonly found on Allwinner SoC based development boards and set top boxes. The driver has been available for some time. Enable it by default. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * | Merge tag 'mvebu-defconfig-4.6-2' of git://git.infradead.org/linux-mvebu ↵Arnd Bergmann2016-02-29
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into next/defconfig Merge "mvebu defconfig for 4.6 (part 2)" from Gregory CLEMENT: enable SRAM support in mvebu_v7_defconfig * tag 'mvebu-defconfig-4.6-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: enable SRAM support in mvebu_v7_defconfig
| | * | ARM: mvebu: enable SRAM support in mvebu_v7_defconfigMarcin Wojtas2016-02-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SRAM support is needed for the hardware buffer management used by the mvneta driver. [gregory.clement@free-electrons.com: add commit log] Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
| * | | Merge tag 'arm-soc/for-4.6/defconfig' of http://github.com/Broadcom/stblinux ↵Arnd Bergmann2016-02-26
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into next/defconfig Merge "Broadcom defconfig changes for 4.6" from Florian Fainelli: This pull request contains defconfig changes for Broadcom ARM-based SoCs: - Daniel enables all that is required to get the BCM283x (Raspberry Pi and Raspberry Pi 2) SoCs to boot with multi_v7_defconfig - Stefan enables the Raspberry Pi firmware driver and power domain drivers in bcm2835_defconfig - Stephen refreshes the bcm2835_defconfig, disables DEBUG_LL, and turns on ARMv7 support which is needed for BCM2836 (Raspberry Pi 2) * tag 'arm-soc/for-4.6/defconfig' of http://github.com/Broadcom/stblinux: ARM: multi_v7_defconfig: Enable BCM283x ARM: bcm2835_defconfig: Enable RPi power domain driver ARM: bcm2835_defconfig: Enable RPi firmware driver ARM: bcm2835_defconfig: enable ARMv7 support ARM: bcm2835_defconfig: disable DEBUG_LL ARM: bcm2835_defconfig: rebuild on next-20160205
| | * | | ARM: multi_v7_defconfig: Enable BCM283xDaniel Stone2016-02-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the BCM2835/BCM2836 options required to boot Raspberry Pi. Signed-off-by: Daniel Stone <daniels@collabora.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Lee Jones <lee@kernel.org> Cc: Olof Johansson <olof@lixom.net> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Eric Anholt <eric@anholt.net>
| | * | | ARM: bcm2835_defconfig: Enable RPi power domain driverStefan Wahren2016-02-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After enabling the Raspberry Pi firmware driver which allow us to handle power domains for USB or graphics. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| | * | | ARM: bcm2835_defconfig: Enable RPi firmware driverStefan Wahren2016-02-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This enables the Raspberry Pi driver for GPU specific features. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| | * | | ARM: bcm2835_defconfig: enable ARMv7 supportStephen Warren2016-02-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This makes the RPi2 work; it has an ARMv7 CPU. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Eric Anholt <eric@anholt.net>
| | * | | ARM: bcm2835_defconfig: disable DEBUG_LLStephen Warren2016-02-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This way the kernel works on both RPi0/1 and RPi2 even with earlyprintk in the kernel cmdline; the two hardware platforms use different physical addresses for peripherals, so the same DEBUG_LL configuration won't work on both. If someone needs DEBUG_LL support, they can enable it locally. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Eric Anholt <eric@anholt.net>
| | * | | ARM: bcm2835_defconfig: rebuild on next-20160205Stephen Warren2016-02-17
| | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This separates explicit changes desired in later patches from "automatic" or irrelevant changes caused solely by Kconfig changes. make ARCH=arm bcm2835_defconfig make ARCH=arm savedefconfig mv defconfig arch/arm/configs/bcm2835_defconfig Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Eric Anholt <eric@anholt.net>
| * | | ARM: multi_v5_defconfig: Enable initramfs supportJan Luebbe2016-02-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This makes it possible to automatically boot-test this defconfig with kernelci.org. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | ARM: multi_v5_defconfig: Cleanup multi_v5_defconfigJan Luebbe2016-02-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Regenerate multi_v5_defconfig by running: make multi_v5_defconfig make savedefconfig mv defconfig arch/arm/configs/multi_v5_defconfig Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | ARM: multi_v7_defconfig: enable useful configurations for VybridStefan Agner2016-02-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable configuration options useful for Vybrid: - NFC NAND driver - USB dual-role controller (and Chipidea Gadget support) - Built-in EDMA DMA driver (to be available at LPUART probe) - Vybrid ADC driver - IIO hwmon support (used in i.MX 23/28, patch pending for Vybrid) Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | Merge tag 'socfpga_defconfig_for_v4.6' of ↵Olof Johansson2016-02-24
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/defconfig SoCFPGA defconfig update for v4.6 -Enable initrd/initramfs support * tag 'socfpga_defconfig_for_v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga_defconfig: enable support for initramfs/initrd support Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | ARM: socfpga_defconfig: enable support for initramfs/initrd supportDinh Nguyen2016-02-19
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | Enable CONFIG_BLK_DEV_INITRD. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Kevin Hilman <khilman@baylibre.com>
| * | | Merge tag 'at91-ab-4.6-defconfig' of ↵Olof Johansson2016-02-24
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/defconfig defconfig update for 4.6: - Addition of sama5d2 ADC to sama5_defconfig * tag 'at91-ab-4.6-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: at91/defconfig: add sama5d2 adc support in sama5_defconfig Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | ARM: at91/defconfig: add sama5d2 adc support in sama5_defconfigLudovic Desroches2016-02-17
| | |/ / | | | | | | | | | | | | | | | | Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
| * | | Merge tag 'samsung-defconfig-4.6' of ↵Olof Johansson2016-02-24
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig Defconfig (exynos and multi_v7) changes for Exynos based boards for v4.6: 1. exynos defconfig: a. Enable NEON and accelerated crypto, b. Enable s5p-secss driver (Security SubSystem block for accelerating some cryptographic operations), 2. exynos and multi_v7: Remove MAX77802 RTC Kconfig because the driver was combined into existing rtc-max77686 driver. This depends on changes from RTC tree. * tag 'samsung-defconfig-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: multi_v7_defconfig: Remove MAX77802 RTC Kconfig symbol ARM: exynos_defconfig: Remove MAX77802 RTC Kconfig symbol rtc: max77686: Cleanup and reduce dmesg output rtc: Remove Maxim 77802 driver rtc: max77686: Properly handle regmap_irq_get_virq() error code rtc: max77686: Fix unsupported year message rtc: max77686: Add max77802 support rtc: max77686: Add an indirection level to access RTC registers rtc: max77686: Use a driver data struct instead hard-coded values rtc: max77686: Use usleep_range() instead of msleep() rtc: max77686: Use ARRAY_SIZE() instead of current array length rtc: max77686: Fix max77686_rtc_read_alarm() return value ARM: exynos_defconfig: Enable s5p-secss driver ARM: exynos_defconfig: Enable NEON, accelerated crypto and cpufreq stats Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | | ARM: multi_v7_defconfig: add MACH_ARTPEC6Lars Persson2016-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Lars Persson <larper@axis.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | | Merge tag 'realview-defconfig-redux' of ↵Olof Johansson2016-02-24
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/defconfig This makes the RealView defconfig select SMP on UP so we only need one defconfig for RealView, then adds USB mass storage configuration. * tag 'realview-defconfig-redux' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM: realview: enable USB storage in the defconfig ARM: realview: delete realview-smp_defconfig ARM: realview: activate SMP on the default defconfig Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | | ARM: realview: enable USB storage in the defconfigLinus Walleij2016-02-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is not uncommon to boot a root filesystem from a USB pendrive and similar, so enable USB mass storage, backed by SCSI and SD block devices in the RealView defconfig. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| | * | | | ARM: realview: delete realview-smp_defconfigLinus Walleij2016-02-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We enabled SMP in the realview_defconfig so delete the SMP-specific defconfig. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| | * | | | ARM: realview: activate SMP on the default defconfigLinus Walleij2016-02-09
| | | |/ / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The realview has two defconfigs: realview_defconfig and realview-smp_defconfig. We now have working SMP_ON_UP so make them equal so we can delete the -smp variant. For some reason NO_HZ_FULL was missing from the plain realview_defconfig. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | | Merge tag 'mvebu-defconfig-4.6-1' of git://git.infradead.org/linux-mvebu ↵Olof Johansson2016-02-08
| |\ \ \ \ | | | |_|/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into next/defconfig mvebu defconfig for 4.6 (part 1) - Enable sound module needed for OpenRD in mvebu_v5_defconfig - Add USB nop xceiv support in mvebu_v7_defconfig * tag 'mvebu-defconfig-4.6-1' of git://git.infradead.org/linux-mvebu: ARM: mvebu_v5_defconfig: Enable sound module needed for OpenRD ARM: mvebu: Add USB nop xceiv support in mvebu_v7_defconfig Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | ARM: mvebu_v5_defconfig: Enable sound module needed for OpenRDMartin Michlmayr2016-01-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OpenRD-Client requires the CS42L51 codec. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
| | * | | ARM: mvebu: Add USB nop xceiv support in mvebu_v7_defconfigGregory CLEMENT2016-01-25
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Armada 38x based boards use this "PHY" with their xhci usb controller. It would be also used for Armada 39x and Armada 375 base boars which also had xhci controller. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
| * | | Merge tag 'renesas-defconfig-for-v4.6' of ↵Olof Johansson2016-02-08
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig Renesas ARM Based SoC Defconfig Updates for v4.6 * Enable XHCI_RCAR * Do not enable CONFIG_CPU_BPREDICT_DISABLE * tag 'renesas-defconfig-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: multi_v7_defconfig: Enable XHCI_RCAR ARM: shmobile: enable XHCI_RCAR in defconfig ARM: shmobile: defconfig: Do not enable CONFIG_CPU_BPREDICT_DISABLE Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | ARM: multi_v7_defconfig: Enable XHCI_RCARSimon Horman2016-01-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is used by Renesas R-Car SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
| | * | | ARM: shmobile: enable XHCI_RCAR in defconfigSimon Horman2016-01-27
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.2 (git 2.25.0) at 2025-04-17 11:30:48 -0400