aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/configs
Commit message (Collapse)AuthorAge
...
| * | ARM: multi_v7_defconfig: Enable s5p-secss driverKrzysztof Kozlowski2016-06-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Exynos SoC provides a Security SubSystem block for accelerating some cryptographic operations. Enable the driver for it - s5p-secss to utilize the hardware acceleration. Currently the s5p-secss driver supports AES in CBC and ECB modes. However its usefulness could be doubted. Excerpt of tests on Odroid XU3 (Exynos5422), for 256 bit key, encryption, performance CPU freq governor: algorithm | block size [b] | average speed [MB/s] | cbc-aes-s5p | 16 | 11.5 | cbc-aes-s5p | 64 | 25.4 | cbc-aes-s5p | 256 | 41.0 | cbc-aes-s5p | 1024 | 47.4 | cbc-aes-s5p | 8192 | 49.0 | cbc(aes-generic) | 16 | 0.4 | cbc(aes-generic) | 64 | 1.8 | cbc(aes-generic) | 256 | 6.6 | cbc(aes-generic) | 1024 | 25.2 | cbc(aes-generic) | 8192 | 83.1 | Anyway enable the driver so it will get some testing coverage by community. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
| * | ARM: multi_v7_defconfig: Enable drivers for Exynos4210 Universal C210 boardKrzysztof Kozlowski2016-06-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable drivers needed to get Exynos 4210 Universal C210 board working: MAX8998 MFD and regulators, GPIO-based bit-bang SPI, Exynos DRM FIMD parallel output and Samsung LD9040 RGB panel. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
| * | ARM: multi_v7_defconfig: Enable Trats2 audio codec, touchscreen and sensorsKrzysztof Kozlowski2016-06-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Exynos4412-based Trats2 board has CM36651 proximity/ambient light sensor, MMS114 touchscreen and Wolfson Microelectronics WM1811 CODEC. Enable them in defconfig to get some testing coverage and use its features. While saving defconfig the SND_SOC_ODROIDX2 is removed because it does not exist since commit ee12a817bb4b ("ASoC: samsung: Remove unused Odroid x2/u3 machine driver"). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
| * | ARM: multi_v7_defconfig: Switch max77693 to moduleKrzysztof Kozlowski2016-05-30
| | | | | | | | | | | | | | | | | | | | | The driver can be built as a module, so use this possibility. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
| * | ARM: multi_v7_defconfig: Enable Exynos MFC driver as moduleJavier Martinez Canillas2016-05-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | Exynos SoCs have a Multi Format Video Hardware Codec (MFC) IP block that can be used to {en,de}code video streams by hardware. Enable support for its driver as a module so the MFC can be tested. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
| * | ARM: exynos_defconfig: Enable MFC driver as moduleJavier Martinez Canillas2016-05-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | Exynos SoCs have a Multi Format Video Hardware Codec (MFC) IP block that can be used to {en,de}code video streams by hardware. Enable support for its driver as a module so the MFC can be tested. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
| * | ARM: multi_v7_defconfig: Enable Samsung media platform drivers as modulesJavier Martinez Canillas2016-05-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are a bunch of media platform drivers under drivers/media/platform/ for Samsung SoCs that are enabled in exynos_defconfig but no in multi_v7. This patch enables them as a module to improve build coverage for these drivers and also to allow people use them with proper hardware if modules are installed. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
| * | ARM: exynos_defconfig: Enable Samsung media platform drivers as modulesJavier Martinez Canillas2016-05-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are a bunch of media platform drivers under drivers/media/platform/ that are for Samsung SoCs but are not being built with exynos_defconfig. This patch enables them as a module to improve build coverage for these drivers and also to allow people use them with proper hardware if modules are installed. The S5P MFC driver wasn't enabled since it fails to probe. Only the boolean Kconfig symbols are enabled as built-in, since drivers are not critical and also to keep the kernel binary image size as small as possible. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
| * | ARM: multi_v7_defconfig: Enable Exynos DRM Mixer driverAndrzej Hajda2016-05-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mixer driver is selected by CONFIG_DRM_EXYNOS_HDMI option. Since Exynos5433 HDMI does not require Mixer and there are separate options to select Mixer and HDMI. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
| * | ARM: exynos_defconfig: Disable big.LITTLE switcherBartlomiej Zolnierkiewicz2016-05-30
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Disable big.LITTLE switcher in order to allow automatic usage of cpufreq-dt driver on Exynos542x/Exynos5800 SoCs based boards. This change should not cause any problems as arm_big_little[_dt] driver (which is using big.LITTLE switcher support to do the "real" big.LITTLE switching work) is not used on any Exynos SoC based board currently. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Tested-by: Markus Reichl <m.reichl@fivetechno.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Anand Moon <linux.amoon@gmail.com> Tested-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
* | arm: use the new LED disk activity triggerStephan Linz2016-06-27
| | | | | | | | | | | | | | | | | | | | | | | | - dts: rename 'ide-disk' to 'disk-activity' - platform: rename 'ide-disk' to 'disk-activity' - defconfig: rename 'LEDS_TRIGGER_IDE_DISK' to 'LEDS_TRIGGER_DISK' Signed-off-by: Stephan Linz <linz@li-pro.net> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
* | Merge tag 'samsung-fixes-4.7' of ↵Olof Johansson2016-06-03
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into fixes Two fixes for v4.7 cycle for build issues: 1. Fix samsung-keypad build error if INPUT is selected as module. The error though depends on some uncommon build settings so it is not as easy to trigger. 2. Get rid of 'samsung_device_dma_mask' defined but not used warning. * tag 'samsung-fixes-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: exynos: don't select keyboard driver ARM: samsung: improve static dma_mask definition Signed-off-by: Olof Johansson <olof@lixom.net>
| * ARM: exynos: don't select keyboard driverArnd Bergmann2016-05-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The samsung-keypad driver is implicitly selected by ARCH_EXYNOS4 (why?), but this fails if CONFIG_INPUT is a loadable module: drivers/input/built-in.o: In function `samsung_keypad_remove': drivers/input/keyboard/samsung-keypad.c:461: undefined reference to `input_unregister_device' drivers/input/built-in.o: In function `samsung_keypad_irq': drivers/input/keyboard/samsung-keypad.c:137: undefined reference to `input_event' drivers/input/built-in.o: In function `samsung_keypad_irq': include/linux/input.h:389: undefined reference to `input_event' drivers/input/built-in.o: In function `samsung_keypad_probe': drivers/input/keyboard/samsung-keypad.c:358: undefined reference to `devm_input_allocate_device' drivers/input/built-in.o:(.debug_addr+0x34): undefined reference to `input_set_capability' This removes the 'select' as suggested by Krzysztof Kozlowski and instead enables the driver from the defconfig files. The problem does not happen on mainline kernels, as we don't normally build built-in input drivers when CONFIG_INPUT=m, but I am experimenting with a patch to change this, and the samsung keypad driver showed up as one example that was silently broken before. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.org/lkml/2016/2/14/55 Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
* | arch/defconfig: remove CONFIG_RESOURCE_COUNTERSKonstantin Khlebnikov2016-05-23
| | | | | | | | | | | | | | | | | | | | This option was replaced by PAGE_COUNTER which is selected by MEMCG. Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge tag 'armsoc-defconfig' of ↵Linus Torvalds2016-05-18
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC defconfig updates from Arnd Bergmann: "As usual, a bunch of commits, mostly adding drivers and other options to defconfigs. We are adding three new defconfig files for the newly added 32-bit machines (aspeed and mps2), the rest is mainly housekeeping. The changes outside of arch/arm/config/ are for a Kconfig symbol that got renamed" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (63 commits) ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME ARM: u8500_defconfig: update sensor config ARM: u8500_defconfig: remove staging from defconfig ARM: multi_v7_defconfig: Remove unused Kconfig option MACH_UX500_DT ARM: at91/defconfig: sama5: add CONFIG_FHANDLE arm/configs: Add Aspeed defconfig arm/configs/multi_v5: Add Aspeed ast2400 ARM: at91: sama5: Update defconfig ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO ARM: multi_v7: Enable Tegra XUSB controller in defconfig ARM: tegra: Enable XUSB controller in defconfig ARM: omap2plus_defconfig: Enable PWM and ir-rx51 as loadable modules ARM: multi_v7_defconfig: add the Atmel sama5d2-compatible ADC driver ARM: multi_v7_defconfig: add the Atmel Audio microphone interface PDMIC ARM: multi_v7_defconfig: add Atmel ISI (Image Sensor Interface) driver ARM: multi_v7_defconfig: add Atmel watchdog timers ARM: multi_v7_defconfig: add HLCDC drivers as modules ARM: at91/defconfig: add PDMIC driver to sama5_defconfig ARM: at91/defconfig: add HLCDC driver to sama5_defconfig ...
| * | ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIMEArnd Bergmann2016-05-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 94ea9c7a579f ("lib, switch CONFIG_PRINTK_TIME to int") changes the type of CONFIG_PRINTK_TIME and adapts all existing defconfig files, while we add two new defconfig files with d0bc3483da87 ("arm/configs: Add Aspeed defconfig"), with the old type. This changes the two new defconfig files to match the other ones. As a result, we get harmless warnings for the arm-soc defconfig branch by itself, but everything will work when 4.7-rc1 is out. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | Merge tag 'at91-defconfig2' of ↵Arnd Bergmann2016-05-10
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/defconfig Merge "Second batch of defconfig" from Nicolas Ferre: - sama5_defconfig: update to support easy use of systemd userspace * tag 'at91-defconfig2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91/defconfig: sama5: add CONFIG_FHANDLE ARM: at91: sama5: Update defconfig ARM: multi_v7_defconfig: add the Atmel sama5d2-compatible ADC driver ARM: multi_v7_defconfig: add the Atmel Audio microphone interface PDMIC ARM: multi_v7_defconfig: add Atmel ISI (Image Sensor Interface) driver ARM: multi_v7_defconfig: add Atmel watchdog timers ARM: multi_v7_defconfig: add HLCDC drivers as modules ARM: at91/defconfig: add PDMIC driver to sama5_defconfig ARM: at91/defconfig: add HLCDC driver to sama5_defconfig ARM: at91/defconfig: add the HDMA controller to sama5_defconfig
| | * | ARM: at91/defconfig: sama5: add CONFIG_FHANDLENicolas Ferre2016-05-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_FHANDLE is listed as a mandatory kernel option for systemd. So explicitly enable it to allow easy use of systemd userspace. Reported-by: Marek Vasut <marex@denx.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
| | * | ARM: at91: sama5: Update defconfigMarek Vasut2016-05-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable CGROUPS support, so we can boot userspace that uses systemd on top of kernel configured using this defconfig. The systemd userspace depends on cgroups and without them, it dies in mysterious ways. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
| | * | ARM: multi_v7_defconfig: add the Atmel sama5d2-compatible ADC driverNicolas Ferre2016-04-27
| | | | | | | | | | | | | | | | | | | | | | | | Add the new sama5d2-compatible ADC driver as a module. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
| | * | ARM: multi_v7_defconfig: add the Atmel Audio microphone interface PDMICNicolas Ferre2016-04-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the Atmel Pulse Density Modulation Interface Controller (PDMIC) driver as a module. It's used by sama5d2 SoC for instance. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
| | * | ARM: multi_v7_defconfig: add Atmel ISI (Image Sensor Interface) driverNicolas Ferre2016-04-27
| | | | | | | | | | | | | | | | | | | | | | | | Add the Atmel Image Sensor Interface (ISI) VIDEO driver as a module. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
| | * | ARM: multi_v7_defconfig: add Atmel watchdog timersNicolas Ferre2016-04-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add both Atmel watchdog timers to the multi_v7_defconfig. They are added as part of the kernel because it's a core piece of the system. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
| | * | ARM: multi_v7_defconfig: add HLCDC drivers as modulesBoris Brezillon2016-04-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the HLCDC drivers to multi_v7_defconfig. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
| | * | ARM: at91/defconfig: add PDMIC driver to sama5_defconfigNicolas Ferre2016-04-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add Pulse Density Modulation Interface Controller (PDMIC) driver compilation for sama5 default configuration. Is used by sama5d2 SoC for instance. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
| | * | ARM: at91/defconfig: add HLCDC driver to sama5_defconfigNicolas Ferre2016-04-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the LCD DRM driver with all its dependencies: - the MFD driver - the backlight PWM - the simple panel driver Remove the CONFIG_FB as it is not needed on any sama5 device. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
| | * | ARM: at91/defconfig: add the HDMA controller to sama5_defconfigNicolas Ferre2016-04-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Selection of the HDMAC option is now needed to allow some sama5 devices to have the DMA driver compiled and available. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
| * | | Merge tag 'aspeed-for-4.7-defconfig' of https://github.com/shenki/linux into ↵Arnd Bergmann2016-05-10
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | next/defconfig Merge "aspeed defconfig for 4.7" from Joel Stanley: This adds configurations used for testing Aspeed BMC SoCs, as well as adding the v5 part to the multi defconfig. * tag 'aspeed-for-4.7-defconfig' of https://github.com/shenki/linux: arm/configs: Add Aspeed defconfig arm/configs/multi_v5: Add Aspeed ast2400
| | * | | arm/configs: Add Aspeed defconfigJoel Stanley2016-05-09
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Joel Stanley <joel@jms.id.au>
| | * | | arm/configs/multi_v5: Add Aspeed ast2400Joel Stanley2016-05-09
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the Aspeed ast2400 BMC SoC to the build. The SoC has six UARTs so we need to enable the appropriate options for SERIAL_8250 Signed-off-by: Joel Stanley <joel@jms.id.au>
| * | | Merge tag 'ux500-defconfig-armsoc2' of ↵Arnd Bergmann2016-05-10
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/defconfig Merge "Ux500 defconfig update for v4.7" from Linus Walleij: - Remove the unused MACH_UX500_DT option from the multi_v7 defconfig - Remove staging driver from u8500_defconfig - Update sensor support in u8500_defconfig * tag 'ux500-defconfig-armsoc2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: u8500_defconfig: update sensor config ARM: u8500_defconfig: remove staging from defconfig ARM: multi_v7_defconfig: Remove unused Kconfig option MACH_UX500_DT
| | * | | ARM: u8500_defconfig: update sensor configLinus Walleij2016-05-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Ux500 is using buffered IIO as the sensors support IRQs. The BH1780 ambient light sensor was added to IIO, so disable the old misc driver and activate the driver in IIO. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| | * | | ARM: u8500_defconfig: remove staging from defconfigLinus Walleij2016-05-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ux500 was enabling the staging drivers due to the RMI4 touchscreen driver, this is now properly upstream, so drop this and the dead symbol for the old RMI4 hack from the defconfig. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| | * | | ARM: multi_v7_defconfig: Remove unused Kconfig option MACH_UX500_DTLee Jones2016-05-10
| | |/ / | | | | | | | | | | | | | | | | | | | | Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | Merge tag 'imx-defconfig-4.7' of ↵Arnd Bergmann2016-05-10
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig Merge "i.MX defconfig updates for 4.7" from Shawn Guo: - Update multi_v5_defconfig for i.MX21/27 and systemd support - Update imx_v6_v7_defconfig to support devices found on various i.MX6 board: FT5x06 and TSC2004 touch, I2C GPIO, MICREL PHY and M41T80 RTC * tag 'imx-defconfig-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO ARM: multi_v5_defconfig: Enable recommended options for systemd ARM: multi_v5_defconfig: Enable support for MX21/MX27 ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80 ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support
| | * | | ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHYMarcel Ziswiler2016-05-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver for Micrel PHYs is required for the Apalis iMX6 module plugged into a Ixora carrier board featuring an on-module Micrel KSZ9031 Gigabit PHY. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIOMarcel Ziswiler2016-05-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GPIO-based bitbanging I2C driver is required to make HDMI work on the Apalis iMX6 module plugged into a Ixora carrier board featuring a DDC channel to read a screen's EDID being hooked up to regular GPIOs. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | ARM: multi_v5_defconfig: Enable recommended options for systemdJan Luebbe2016-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable FHANDLE, CGROUPS, BLK_DEV_BSG and DEVTMPFS as recommended by systemd (which also matches the multi_v7 defconfig). Also enable IPV6, which defaults to 'y' by now. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | ARM: multi_v5_defconfig: Enable support for MX21/MX27Jan Luebbe2016-04-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Although the SoC support was already enabled, the drivers and machines were missing. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80Gary Bisson2016-04-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The rv4168 RTC is used by the following platforms: - Nitrogen6_MAX (both Quad and Quad Plus versions) - Nitrogen7 Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIOGary Bisson2016-04-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I2C muxing is used on Nitrogen6_MAX board from Boundary Devices. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch supportGary Bisson2016-04-06
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | Those two touch controllers are used by Boundary Devices platforms. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| * | | Merge tag 'tegra-for-4.7-defconfig' of ↵Arnd Bergmann2016-05-10
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/defconfig Merge "ARM: tegra: Default configuration updates for v4.7-rc1" from Thierry Reding: Enable the XUSB pad controller and XUSB controller drivers on the Tegra and multi-v7 default configurations. * tag 'tegra-for-4.7-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: multi_v7: Enable Tegra XUSB controller in defconfig ARM: tegra: Enable XUSB controller in defconfig
| | * | | ARM: multi_v7: Enable Tegra XUSB controller in defconfigThierry Reding2016-04-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the XUSB pad controller and XUSB controller (implementing an XHCI interface) in the multi_v7 default configuration. The XUSB pad controller is built-in because it is needed by PCIe, which in turn provides the onboard ethernet used for network boot on a Jetson TK1. Signed-off-by: Thierry Reding <treding@nvidia.com>
| | * | | ARM: tegra: Enable XUSB controller in defconfigThierry Reding2016-04-29
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | Enable the XUSB pad controller and XUSB controller (implementing an XHCI interface) in the Tegra default configuration. Signed-off-by: Thierry Reding <treding@nvidia.com>
| * | | Merge tag 'davinci-for-v4.7/defconfig' of ↵Arnd Bergmann2016-05-10
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig Merge "DaVinci defconfig updates for v4.7" from Sekhar Nori: Some defconfig updates to support systemd based filesystems, SPI NOR and GPIO sysfs entries. * tag 'davinci-for-v4.7/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci_all_defconfig: enable SPI and NOR as modules ARM: davinci_all_defconfig: support systemd ARM: davinci_all_defconfig: enable GPIO_SYSFS
| | * | | ARM: davinci_all_defconfig: enable SPI and NOR as modulesKevin Hilman2016-04-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable SPI driver and SPI NOR flash support as modules. Tested with SPI NOR flash on DA850-EVM. Basic boot test only to confirm NOR flash device detection. Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
| | * | | ARM: davinci_all_defconfig: support systemdSekhar Nori2016-04-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_FHANDLE is required by systemd[1], which is the default init system in more and more distributions. So lets enable it for DaVinci platforms as well. While at it, remove stale entry CONFIG_INOTIFY=y [1] https://github.com/systemd/systemd/blob/master/README#L37 Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
| | * | | ARM: davinci_all_defconfig: enable GPIO_SYSFSSekhar Nori2016-04-14
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_GPIO_SYSFS provides a convenient way to access GPIOs from userspace. Enable it for DaVinci. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
| * | | Merge tag 'omap-for-v4.7/defconfig-signed' of ↵Arnd Bergmann2016-04-28
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig Merge "Defconfig changes for omap2plus_defconfig for v4.7 merge window" from Tony Lindgren: Mostly enable drivers used on various boards as loadable modules where possible. Also one warning fix related to RXKAD changes heading to v4.7. And run make save_defconfig to shrink down the size a bit. * tag 'omap-for-v4.7/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: omap2plus_defconfig: Enable PWM and ir-rx51 as loadable modules ARM: omap2plus_defconfig: Enable twl6030 USB phy as loadable module ARM: omap2plus_defconfig: Fix warning due invalid RXKAD symbol value ARM: omap2plus_defconfig: Update with make savedefconfig ARM: omap2plus_defconfig: Enable MDIO Bus/PHY emulation support ARM: omap2plus_defconfig: Enable DP83867 support ARM: omap2plus_defconfig: Enable GPIO_TPIC2810
generated by cgit v1.2.2 (git 2.25.0) at 2025-04-06 21:35:36 -0400