1 files changed, 40 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
new file mode 100644
index 000000000000..cb60443ff78f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
@@ -0,0 +1,40 @@
+* Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor
+
+The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor with
+an active array size of 2592H x 1944V. It is programmable through a simple
+two-wire serial interface.
+
+Required Properties:
+- compatible: value should be either one among the following
+        (a) "aptina,mt9p031" for mt9p031 sensor
+        (b) "aptina,mt9p031m" for mt9p031m sensor
+
+- input-clock-frequency: Input clock frequency.
+
+- pixel-clock-frequency: Pixel clock frequency.
+
+Optional Properties:
+- reset-gpios: Chip reset GPIO
+
+For further reading on port node refer to
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+
+        i2c0@1c22000 {
+                ...
+                ...
+                mt9p031@5d {
+                        compatible = "aptina,mt9p031";
+                        reg = <0x5d>;
+                        reset-gpios = <&gpio3 30 0>;
+
+                        port {
+                                mt9p031_1: endpoint {
+                                        input-clock-frequency = <6000000>;
+                                        pixel-clock-frequency = <96000000>;
+                                };
+                        };
+                };
+                ...
+        };