clk: add duty cycle support

Add the possibility to apply and query the clock signal duty cycle ratio.

This is useful when the duty cycle of the clock signal depends on some
other parameters controlled by the clock framework.

For example, the duty cycle of a divider may depends on the raw divider
setting (ratio = N / div) , which is controlled by the CCF. In such case,
going through the pwm framework to control the duty cycle ratio of this
clock would be a burden.

A clock provider is not required to implement the operation to set and get
the duty cycle. If it does not implement .get_duty_cycle(), the ratio is
assumed to be 50%.

This change also adds a new flag, CLK_DUTY_CYCLE_PARENT. This flag should
be used to indicate that a clock, such as gates and muxes, may inherit
the duty cycle ratio of its parent clock. If a clock does not provide a
get_duty_cycle() callback and has CLK_DUTY_CYCLE_PARENT, then the call
will be directly forwarded to its parent clock, if any. For
set_duty_cycle(), the clock should also have CLK_SET_RATE_PARENT for the
call to be forwarded

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/20180619144141.8506-1-jbrunet@baylibre.com

1 files changed, 33 insertions, 0 deletions

diff --git a/include/linux/clk.h b/include/linux/clk.h
index 0dbd0885b2c2..4f750c481b82 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -142,6 +142,27 @@ int clk_set_phase(struct clk *clk, int degrees);
 int clk_get_phase(struct clk *clk);
 
 /**
+ * clk_set_duty_cycle - adjust the duty cycle ratio of a clock signal
+ * @clk: clock signal source
+ * @num: numerator of the duty cycle ratio to be applied
+ * @den: denominator of the duty cycle ratio to be applied
+ *
+ * Adjust the duty cycle of a clock signal by the specified ratio. Returns 0 on
+ * success, -EERROR otherwise.
+ */
+int clk_set_duty_cycle(struct clk *clk, unsigned int num, unsigned int den);
+
+/**
+ * clk_get_duty_cycle - return the duty cycle ratio of a clock signal
+ * @clk: clock signal source
+ * @scale: scaling factor to be applied to represent the ratio as an integer
+ *
+ * Returns the duty cycle ratio multiplied by the scale provided, otherwise
+ * returns -EERROR.
+ */
+int clk_get_scaled_duty_cycle(struct clk *clk, unsigned int scale);
+
+/**
  * clk_is_match - check if two clk's point to the same hardware clock
  * @p: clk compared against q
  * @q: clk compared against p
@@ -183,6 +204,18 @@ static inline long clk_get_phase(struct clk *clk)
         return -ENOTSUPP;
 }
 
+static inline int clk_set_duty_cycle(struct clk *clk, unsigned int num,
+                                     unsigned int den)
+{
+        return -ENOTSUPP;
+}
+
+static inline unsigned int clk_get_scaled_duty_cycle(struct clk *clk,
+                                                     unsigned int scale)
+{
+        return 0;
+}
+
 static inline bool clk_is_match(const struct clk *p, const struct clk *q)
 {
         return p == q;