libata: Add support for queued DSM TRIM

Some new SSDs support the queued version of the DSM TRIM command.
Let the driver use the new command if supported.

Signed-off-by: Marc Carino <marc.ceeeee@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

1 files changed, 19 insertions, 6 deletions

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index f177ad6bfd09..58026106fcd9 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3097,12 +3097,25 @@ static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc)
         buf = page_address(sg_page(scsi_sglist(scmd)));
         size = ata_set_lba_range_entries(buf, 512, block, n_block);
 
-        tf->protocol = ATA_PROT_DMA;
-        tf->hob_feature = 0;
-        tf->feature = ATA_DSM_TRIM;
-        tf->hob_nsect = (size / 512) >> 8;
-        tf->nsect = size / 512;
-        tf->command = ATA_CMD_DSM;
+        if (ata_ncq_enabled(dev) && ata_fpdma_dsm_supported(dev)) {
+                /* Newer devices support queued TRIM commands */
+                tf->protocol = ATA_PROT_NCQ;
+                tf->command = ATA_CMD_FPDMA_SEND;
+                tf->hob_nsect = ATA_SUBCMD_FPDMA_SEND_DSM & 0x1f;
+                tf->nsect = qc->tag << 3;
+                tf->hob_feature = (size / 512) >> 8;
+                tf->feature = size / 512;
+
+                tf->auxiliary = 1;
+        } else {
+                tf->protocol = ATA_PROT_DMA;
+                tf->hob_feature = 0;
+                tf->feature = ATA_DSM_TRIM;
+                tf->hob_nsect = (size / 512) >> 8;
+                tf->nsect = size / 512;
+                tf->command = ATA_CMD_DSM;
+        }
+
         tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48 |
                      ATA_TFLAG_WRITE;