iio: distance: add devantech us ranger srf04

This patch adds support for the ultrasonic ranger srf04 of devantech.

This device is measuring the distance of objects in a range between 1 cm
and 3 meters and a theoretical resolution of 3 mm.

There are two GPIOs used:
  - trigger: set as output to the device when the measurement should start
  - echo: set by the device when the ultrasonic wave is sent out and reset
    when the echo is recognized; this needs to be an interrupt input

The time between setting and resetting the echo pin is the time the
waveform needed for one round trip. This time is recorded in the interrupt
handler.

The distance is calculated in the read function by using the ultrasonic
speed at 20 degrees celsius which is about 343 m/s.

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

1 files changed, 6 insertions, 0 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 89e0877e1399..adb9cb0d3d40 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3790,6 +3790,12 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
 S:      Maintained
 F:      drivers/usb/dwc3/
 
+DEVANTECH SRF ULTRASONIC RANGER IIO DRIVER
+M:      Andreas Klinger <ak@it-klinger.de>
+L:      linux-iio@vger.kernel.org
+S:      Maintained
+F:      drivers/iio/proximity/srf*.c
+
 DEVICE COREDUMP (DEV_COREDUMP)
 M:      Johannes Berg <johannes@sipsolutions.net>
 L:      linux-kernel@vger.kernel.org